Brian Norris [Wed, 13 Mar 2013 16:51:31 +0000 (09:51 -0700)]
mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY
This partially reverts commit
1696e6bc2ae83734e64e206ac99766ea19e9a14e
("mtd: nand: kill NAND_NO_READRDY").
In that patch I overlooked a few things.
The original documentation for NAND_NO_READRDY included "True for all
large page devices, as they do not support autoincrement." I was
conflating "not support autoincrement" with the NAND_NO_AUTOINCR option,
which was in fact doing nothing. So, when I dropped NAND_NO_AUTOINCR, I
concluded that I then could harmlessly drop NAND_NO_READRDY. But of
course the fact the NAND_NO_AUTOINCR was doing nothing didn't mean
NAND_NO_READRDY was doing nothing...
So, NAND_NO_READRDY is re-introduced as NAND_NEED_READRDY and applied
only to those few remaining small-page NAND which needed it in the first
place.
Cc: stable@kernel.org [3.5+]
Reported-by: Alexander Shiyan <shc_work@mail.ru>
Tested-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Rafał Miłecki [Thu, 7 Mar 2013 08:02:39 +0000 (09:02 +0100)]
mtd: bcm47xxpart: look for NVRAM at the end of device
NVRAM is always placed at the end of device and it does not have to
start at the beginning of a block, so check few possible offsets.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Rafał Miłecki [Thu, 7 Mar 2013 08:02:38 +0000 (09:02 +0100)]
Revert "mtd: bcm47xxpart: improve probing of nvram partition"
This reverts commit
be3781b71ac03723b552dc156931620634ef1b22.
Some CFE bootloaders have NVRAM at offset 0x1000. With that patch we
were detecting such a bootloaders as a standard NVRAM partition.
Changing anything in this pseudo-NVRAM resulted in corrupted bootloader
and bricked device!
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Linus Torvalds [Sun, 3 Mar 2013 00:33:54 +0000 (16:33 -0800)]
Merge tag 'for-linus-
20130301' of git://git.infradead.org/linux-mtd
Pull MTD update from David Woodhouse:
"Fairly unexciting MTD merge for 3.9:
- misc clean-ups in the MTD command-line partitioning parser
(cmdlinepart)
- add flash locking support for STmicro chips serial flash chips, as
well as for CFI command set 2 chips.
- new driver for the ELM error correction HW module found in various
TI chips, enable the OMAP NAND driver to use the ELM HW error
correction
- added number of new serial flash IDs
- various fixes and improvements in the gpmi NAND driver
- bcm47xx NAND driver improvements
- make the mtdpart module actually removable"
* tag 'for-linus-
20130301' of git://git.infradead.org/linux-mtd: (45 commits)
mtd: map: BUG() in non handled cases
mtd: bcm47xxnflash: use pr_fmt for module prefix in messages
mtd: davinci_nand: Use managed resources
mtd: mtd_torturetest can cause stack overflows
mtd: physmap_of: Convert device allocation to managed devm_kzalloc()
mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement.
mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional.
mtd: atmel_nand: avoid to report an error when lookup table offset is 0.
mtd: bcm47xxsflash: adjust names of bus-specific functions
mtd: bcm47xxpart: improve probing of nvram partition
mtd: bcm47xxpart: add support for other erase sizes
mtd: bcm47xxnflash: register this as normal driver
mtd: bcm47xxnflash: fix message
mtd: bcm47xxsflash: register this as normal driver
mtd: bcm47xxsflash: write number of written bytes
mtd: gpmi: add sanity check for the ECC
mtd: gpmi: set the Golois Field bit for mx6q's BCH
mtd: devices: elm: Removes <xx> literals in elm DT node
mtd: gpmi: fix a dereferencing freed memory error
mtd: fix the wrong timeo for panic_nand_wait()
...
Linus Torvalds [Sat, 2 Mar 2013 19:44:27 +0000 (11:44 -0800)]
Merge tag 'dm-3.9-changes' of git://git./linux/kernel/git/agk/linux-dm
Pull device-mapper update from Alasdair G Kergon:
"The main addition here is a long-desired target framework to allow an
SSD to be used as a cache in front of a slower device. Cache tuning
is delegated to interchangeable policy modules so these can be
developed independently of the mechanics needed to shuffle the data
around.
Other than that, kcopyd users acquire a throttling parameter, ioctl
buffer usage gets streamlined, more mempool reliance is reduced and
there are a few other bug fixes and tidy-ups."
* tag 'dm-3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (30 commits)
dm cache: add cleaner policy
dm cache: add mq policy
dm: add cache target
dm persistent data: add bitset
dm persistent data: add transactional array
dm thin: remove cells from stack
dm bio prison: pass cell memory in
dm persistent data: add btree_walk
dm: add target num_write_bios fn
dm kcopyd: introduce configurable throttling
dm ioctl: allow message to return data
dm ioctl: optimize functions without variable params
dm ioctl: introduce ioctl_flags
dm: merge io_pool and tio_pool
dm: remove unused _rq_bio_info_cache
dm: fix limits initialization when there are no data devices
dm snapshot: add missing module aliases
dm persistent data: set some btree fn parms const
dm: refactor bio cloning
dm: rename bio cloning functions
...
Linus Torvalds [Sat, 2 Mar 2013 19:43:27 +0000 (11:43 -0800)]
Merge branch 'for-next' of git://git./linux/kernel/git/nab/target-pending
Pull SCSI target patches from Nicholas Bellinger:
"Here are the remaining target-pending patches for v3.9-rc1.
The most important one here is the immediate queue starvation
regression fix for iscsi-target, which addresses a bug that's
effecting v3.5+ kernels under heavy sustained READ only workloads.
Thanks alot to Benjamin Estrabaud for helping to track this down!
Also included is a pSCSI exception bugfix from Asias, along with a
handful of other minor changes. Both bugfixes are CC'ed to stable."
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target/pscsi: Rename sg_num to nr_vecs in pscsi_get_bio()
target/pscsi: Fix page increment
target/pscsi: Drop unnecessary NULL assignment to bio->bi_next
target: Add __exit annotation for module_exit functions
iscsi-target: Fix immediate queue starvation regression with DATAIN
Linus Torvalds [Sat, 2 Mar 2013 19:42:16 +0000 (11:42 -0800)]
Merge tag 'scsi-for-linus' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is an assorted set of stragglers into the merge window with
driver updates for qla2xxx, megaraid_sas, storvsc and ufs.
It also includes pulls of the uapi tree (all the remaining SCSI
pieces) and the fcoe tree (updates to fcoe and libfc)"
* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (81 commits)
[SCSI] ufs: Separate PCI code into glue driver
[SCSI] ufs: Segregate PCI Specific Code
[SCSI] scsi: fix lpfc build when wmb() is defined as mb()
[SCSI] storvsc: Handle dynamic resizing of the device
[SCSI] storvsc: Restructure error handling code on command completion
[SCSI] storvsc: avoid usage of WRITE_SAME
[SCSI] aacraid: suppress two GCC warnings
[SCSI] hpsa: check for dma_mapping_error in hpsa_passthru ioctls
[SCSI] hpsa: reorganize error handling in hpsa_passthru_ioctl
[SCSI] hpsa: check for dma_mapping_error in hpsa_map_sg_chain_block
[SCSI] hpsa: Check for dma_mapping_error for all code paths using fill_cmd
[SCSI] hpsa: Check for dma_mapping_error in hpsa_map_one
[SCSI] dc395x: uninitialized variable in device_alloc()
[SCSI] Fix range check in scsi_host_dif_capable()
[SCSI] storvsc: Initialize the sglist
[SCSI] mpt2sas: Add support for OEM specific controller
[SCSI] ipr: Fix oops while resetting an ipr adapter
[SCSI] fnic: Fnic Trace Utility
[SCSI] fnic: New debug flags and debug log messages
[SCSI] fnic: fnic driver may hit BUG_ON on device reset
...
Yinghai Lu [Fri, 1 Mar 2013 22:51:27 +0000 (14:51 -0800)]
x86, ACPI, mm: Revert movablemem_map support
Tim found:
WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80()
Hardware name: S2600CP
sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
smpboot: Booting Node 1, Processors #1
Modules linked in:
Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1
Call Trace:
set_cpu_sibling_map+0x279/0x449
start_secondary+0x11d/0x1e5
Don Morris reproduced on a HP z620 workstation, and bisected it to
commit
e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock
is ready")
It turns out movable_map has some problems, and it breaks several things
1. numa_init is called several times, NOT just for srat. so those
nodes_clear(numa_nodes_parsed)
memset(&numa_meminfo, 0, sizeof(numa_meminfo))
can not be just removed. Need to consider sequence is: numaq, srat, amd, dummy.
and make fall back path working.
2. simply split acpi_numa_init to early_parse_srat.
a. that early_parse_srat is NOT called for ia64, so you break ia64.
b. for (i = 0; i < MAX_LOCAL_APIC; i++)
set_apicid_to_node(i, NUMA_NO_NODE)
still left in numa_init. So it will just clear result from early_parse_srat.
it should be moved before that....
c. it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved
early before override from INITRD is settled.
3. that patch TITLE is total misleading, there is NO x86 in the title,
but it changes critical x86 code. It caused x86 guys did not
pay attention to find the problem early. Those patches really should
be routed via tip/x86/mm.
4. after that commit, following range can not use movable ram:
a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed?
b. initrd... it will be freed after booting, so it could be on movable...
c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G
anymore.
d. init_mem_mapping: can not put page table high anymore.
e. initmem_init: vmemmap can not be high local node anymore. That is
not good.
If node is hotplugable, the mem related range like page table and
vmemmap could be on the that node without problem and should be on that
node.
We have workaround patch that could fix some problems, but some can not
be fixed.
So just remove that offending commit and related ones including:
f7210e6c4ac7 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to
protect movablecore_map in memblock_overlaps_region().")
01a178a94e8e ("acpi, memory-hotplug: support getting hotplug info from
SRAT")
27168d38fa20 ("acpi, memory-hotplug: extend movablemem_map ranges to
the end of node")
e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is
ready")
fb06bc8e5f42 ("page_alloc: bootmem limit with movablecore_map")
42f47e27e761 ("page_alloc: make movablemem_map have higher priority")
6981ec31146c ("page_alloc: introduce zone_movable_limit[] to keep
movable limit for nodes")
34b71f1e04fc ("page_alloc: add movable_memmap kernel parameter")
4d59a75125d5 ("x86: get pg_data_t's memory from other node")
Later we should have patches that will make sure kernel put page table
and vmemmap on local node ram instead of push them down to node0. Also
need to find way to put other kernel used ram to local node ram.
Reported-by: Tim Gardner <tim.gardner@canonical.com>
Reported-by: Don Morris <don.morris@hp.com>
Bisected-by: Don Morris <don.morris@hp.com>
Tested-by: Don Morris <don.morris@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 2 Mar 2013 16:34:06 +0000 (08:34 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/signal
Pull signal/compat fixes from Al Viro:
"Fixes for several regressions introduced in the last signal.git pile,
along with fixing bugs in truncate and ftruncate compat (on just about
anything biarch at least one of those two had been done wrong)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
compat: restore timerfd settime and gettime compat syscalls
[regression] braino in "sparc: convert to ksignal"
fix compat truncate/ftruncate
switch lseek to COMPAT_SYSCALL_DEFINE
lseek() and truncate() on sparc really need sign extension
Linus Torvalds [Sat, 2 Mar 2013 16:31:39 +0000 (08:31 -0800)]
Merge tag 'for_linux-3.9' of git://git./linux/kernel/git/jwessel/kgdb
Pull KGDB/KDB fixes and cleanups from Jason Wessel:
"For a change we removed more code than we added. If people aren't
using it we shouldn't be carrying it. :-)
Cleanups:
- Remove kdb ssb command - there is no in kernel disassembler to
support it
- Remove kdb ll command - Always caused a kernel oops and there were
no bug reports so no one was using this command
- Use kernel ARRAY_SIZE macro instead of array computations
Fixes:
- Stop oops in kdb if user executes kdb_defcmd with args
- kdb help command truncated text
- ppc64 support for kgdbts
- Add missing kconfig option from original kdb port for dealing with
catastrophic kernel crashes such that you can reboot automatically
on continue from kdb"
* tag 'for_linux-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kdb: Remove unhandled ssb command
kdb: Prevent kernel oops with kdb_defcmd
kdb: Remove the ll command
kdb_main: fix help print
kdb: Fix overlap in buffers with strcpy
Fixed dead ifdef block by adding missing Kconfig option.
kdb: Setup basic kdb state before invoking commands via kgdb
kdb: use ARRAY_SIZE where possible
kgdb/kgdbts: support ppc64
kdb: A fix for kdb command table expansion
Linus Torvalds [Sat, 2 Mar 2013 15:58:56 +0000 (07:58 -0800)]
Merge tag 'arc-v3.9-rc1-late' of git://git./linux/kernel/git/vgupta/arc
Pull new ARC architecture from Vineet Gupta:
"Initial ARC Linux port with some fixes on top for 3.9-rc1:
I would like to introduce the Linux port to ARC Processors (from
Synopsys) for 3.9-rc1. The patch-set has been discussed on the public
lists since Nov and has received a fair bit of review, specially from
Arnd, tglx, Al and other subsystem maintainers for DeviceTree, kgdb...
The arch bits are in arch/arc, some asm-generic changes (acked by
Arnd), a minor change to PARISC (acked by Helge).
The series is a touch bigger for a new port for 2 main reasons:
1. It enables a basic kernel in first sub-series and adds
ptrace/kgdb/.. later
2. Some of the fallout of review (DeviceTree support, multi-platform-
image support) were added on top of orig series, primarily to
record the revision history.
This updated pull request additionally contains
- fixes due to our GNU tools catching up with the new syscall/ptrace
ABI
- some (minor) cross-arch Kconfig updates."
* tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (82 commits)
ARC: split elf.h into uapi and export it for userspace
ARC: Fixup the current ABI version
ARC: gdbserver using regset interface possibly broken
ARC: Kconfig cleanup tracking cross-arch Kconfig pruning in merge window
ARC: make a copy of flat DT
ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed"
ARC: Ensure CONFIG_VIRT_TO_BUS is not enabled
ARC: Fix pt_orig_r8 access
ARC: [3.9] Fallout of hlist iterator update
ARC: 64bit RTSC timestamp hardware issue
ARC: Don't fiddle with non-existent caches
ARC: Add self to MAINTAINERS
ARC: Provide a default serial.h for uart drivers needing BASE_BAUD
ARC: [plat-arcfpga] defconfig for fully loaded ARC Linux
ARC: [Review] Multi-platform image #8: platform registers SMP callbacks
ARC: [Review] Multi-platform image #7: SMP common code to use callbacks
ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional
ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core
ARC: [Review] Multi-platform image #4: Isolate platform headers
ARC: [Review] Multi-platform image #3: switch to board callback
...
Linus Torvalds [Sat, 2 Mar 2013 15:44:16 +0000 (07:44 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
o Add basic support for the Mediatek/Ralink Wireless SoC family.
o The Qualcomm Atheros platform is extended by support for the new
QCA955X SoC series as well as a bunch of patches that get the code
ready for OF support.
o Lantiq and BCM47XX platform have a few improvements and bug fixes.
o MIPS has sent a few patches that get the kernel ready for the
upcoming microMIPS support.
o The rest of the series is made up of small bug fixes and cleanups
that relate to various parts of the MIPS code. The biggy in there is
a whitespace cleanup. After I was sent another set of whitespace
cleanup patches I decided it was the time to clean the whitespace
"issues" for once and and that touches many files below arch/mips/.
Fix up silly conflicts, mostly due to whitespace cleanups.
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
MIPS: remove broken conditional inside vpe loader code
MIPS: SMTC: fix implicit declaration of set_vi_handler
MIPS: early_printk: drop __init annotations
MIPS: Probe for and report hardware virtualization support.
MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
MIPS: ath79: add USB controller registration code for the QCA955X SoCs
MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
MIPS: ath79: add WMAC registration code for the QCA955X SoCs
MIPS: ath79: register UART for the QCA955X SoCs
MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
MIPS: ath79: add GPIO setup code for the QCA955X SoCs
MIPS: ath79: add IRQ handling code for the QCA955X SoCs
MIPS: ath79: add clock setup code for the QCA955X SoCs
MIPS: ath79: add SoC detection code for the QCA955X SoCs
MIPS: ath79: add early printk support for the QCA955X SoCs
MIPS: ath79: fix WMAC IRQ resource assignment
mips: reserve elfcorehdr
mips: Make sure kernel memory is in iomem
MIPS: ath79: use dynamically allocated USB platform devices
...
Vincent [Tue, 12 Feb 2013 10:34:15 +0000 (11:34 +0100)]
kdb: Remove unhandled ssb command
The 'ssb' command can only be handled when we have a disassembler, to check for
branches, so remove the 'ssb' command for now.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Mon, 4 Feb 2013 16:35:33 +0000 (10:35 -0600)]
kdb: Prevent kernel oops with kdb_defcmd
The kdb_defcmd can only be used to display the available command aliases
while using the kernel debug shell. If you try to define a new macro
while the kernel debugger is active it will oops. The debug shell
macros must use pre-allocated memory set aside at the time kdb_init()
is run, and the kdb_defcmd is restricted to only working at the time
that the kdb_init sequence is being run, which only occurs if you
actually activate the kernel debugger.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Mon, 4 Feb 2013 16:35:33 +0000 (10:35 -0600)]
kdb: Remove the ll command
Recently some code inspection was done after fixing a problem with
kmalloc used while in the kernel debugger context (which is not
legal), and it turned up the fact that kdb ll command will oops the
kernel.
Given that there have been zero bug reports on the command combined
with the fact it will oops the kernel it is clearly not being used.
Instead of fixing it, it will be removed.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Mon, 4 Feb 2013 15:52:14 +0000 (09:52 -0600)]
kdb_main: fix help print
The help command was chopping all the usage instructions such that
they were not readable.
Example:
bta [D|R|S|T|C|Z|E|U|I| Backtrace all processes matching state flag
per_cpu <sym> [<bytes>] [<c Display per_cpu variables
Where as it should look like:
bta [D|R|S|T|C|Z|E|U|I|M|A]
Backtrace all processes matching state flag
per_cpu <sym> [<bytes>] [<cpu>]
Display per_cpu variables
All that is needed is to check the how long the cmd_usage is and jump
to the next line when appropriate.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Sun, 3 Feb 2013 15:32:28 +0000 (09:32 -0600)]
kdb: Fix overlap in buffers with strcpy
Maxime reported that strcpy(s->usage, s->usage+1) has no definitive
guarantee that it will work on all archs the same way when you have
overlapping memory. The fix is simple for the kdb code because we
still have the original string memory in the function scope, so we
just have to use that as the argument instead.
Reported-by: Maxime Villard <rustyBSD@gmx.fr>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Robert Obermeier [Sun, 16 Dec 2012 04:59:36 +0000 (05:59 +0100)]
Fixed dead ifdef block by adding missing Kconfig option.
Added missing Kconfig option KDB_CONTINUE_CATASTROPHIC which lead to a dead
ifdef block in kernel/debug/kdb/kdb_main.c:73-75.
The code using KDB_CONTINUE_CATASTROPHIC was originally introduced in
commit '
5d5314d6795f3c1c0f415348ff8c51f7de042b77' by Jason Wessel.
This patchset ("kdb: core for kgdb back end (1 of 2)")
added platform independent part of kdb to the linux kernel.
The Kernel option however, even though it had the same options and
behaviour on all supported architectures, was part of the x86 and
ia64 patchset of KDB and therefore not pulled into the mainline kernel tree.
I actually took the originally written Kconfig by
Keith Owens <kaos@sgi.com> (2003-06-20 according to KDB changelog)
and changed it to reflect the correct behaviour,
as the KDUMP patchset is not part of the kernel and the expected
functionality is missing from it.
Signed-off-by: Robert Obermeier <obbi89@googlemail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Matt Klein [Wed, 2 Jan 2013 21:20:49 +0000 (13:20 -0800)]
kdb: Setup basic kdb state before invoking commands via kgdb
Although invasive kdb commands are not supported via kgdb, some useful
non-invasive commands like bt* require basic kdb state to be setup before
calling into the kdb code. Factor out some of this code and call it before
and after executing kdb commands via kgdb.
Signed-off-by: Matt Klein <mklein@twitter.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Sasha Levin [Thu, 20 Dec 2012 19:11:27 +0000 (14:11 -0500)]
kdb: use ARRAY_SIZE where possible
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Tiejun Chen [Wed, 27 Feb 2013 03:09:27 +0000 (11:09 +0800)]
kgdb/kgdbts: support ppc64
We can't look up the address of the entry point of the function simply
via that function symbol for all architectures.
For PPC64 ABI, actually there is a function descriptors structure.
A function descriptor is a three doubleword data structure that contains
the following values:
* The first doubleword contains the address of the entry point of
the function.
* The second doubleword contains the TOC base address for
the function.
* The third doubleword contains the environment pointer for
languages such as Pascal and PL/1.
So we should call a wapperred dereference_function_descriptor() to get
the address of the entry point of the function.
Note this is also safe for other architecture after refer to
"include/asm-generic/sections.h" since:
dereference_function_descriptor(p) always is (p) if without arched definition.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
John Blackwood [Mon, 10 Dec 2012 21:37:22 +0000 (15:37 -0600)]
kdb: A fix for kdb command table expansion
When locally adding in some additional kdb commands, I stumbled
across an issue with the dynamic expansion of the kdb command table.
When the number of kdb commands exceeds the size of the statically
allocated kdb_base_commands[] array, additional space is allocated in
the kdb_register_repeat() routine.
The unused portion of the newly allocated array was not being initialized
to zero properly and this would result in segfaults when help '?' was
executed or when a search for a non-existing command would traverse the
command table beyond the end of valid command entries and then attempt
to use the non-zeroed area as actual command entries.
Signed-off-by: John Blackwood <john.blackwood@ccur.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Heiko Carstens [Sat, 2 Mar 2013 11:26:30 +0000 (12:26 +0100)]
compat: restore timerfd settime and gettime compat syscalls
Both compat syscalls got lost with
9d94b9e2 "switch timerfd compat syscalls
to COMPAT_SYSCALL_DEFINE" because of a typo:
COMPAT instead of CONFIG_COMPAT.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sat, 2 Mar 2013 07:55:16 +0000 (02:55 -0500)]
[regression] braino in "sparc: convert to ksignal"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Heinz Mauelshagen [Fri, 1 Mar 2013 22:45:52 +0000 (22:45 +0000)]
dm cache: add cleaner policy
A simple cache policy that writes back all data to the origin.
This is used to decommission a dm cache by emptying it.
Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Joe Thornber [Fri, 1 Mar 2013 22:45:51 +0000 (22:45 +0000)]
dm cache: add mq policy
A cache policy that uses a multiqueue ordered by recent hit
count to select which blocks should be promoted and demoted.
This is meant to be a general purpose policy. It prioritises
reads over writes.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Joe Thornber [Fri, 1 Mar 2013 22:45:51 +0000 (22:45 +0000)]
dm: add cache target
Add a target that allows a fast device such as an SSD to be used as a
cache for a slower device such as a disk.
A plug-in architecture was chosen so that the decisions about which data
to migrate and when are delegated to interchangeable tunable policy
modules. The first general purpose module we have developed, called
"mq" (multiqueue), follows in the next patch. Other modules are
under development.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Joe Thornber [Fri, 1 Mar 2013 22:45:51 +0000 (22:45 +0000)]
dm persistent data: add bitset
Add a persistent bitset as a wrapper around dm-array.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Joe Thornber [Fri, 1 Mar 2013 22:45:51 +0000 (22:45 +0000)]
dm persistent data: add transactional array
Add a transactional array.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Joe Thornber [Fri, 1 Mar 2013 22:45:50 +0000 (22:45 +0000)]
dm thin: remove cells from stack
This patch takes advantage of the new bio-prison interface where the
memory is now passed in rather than using a mempool in bio-prison.
This allows the map function to avoid performing potentially-blocking
allocations that could lead to deadlocks: We want to avoid the cell
allocation that is done in bio_detain.
(The potential for mempool deadlocks still remains in other functions
that use bio_detain.)
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Joe Thornber [Fri, 1 Mar 2013 22:45:50 +0000 (22:45 +0000)]
dm bio prison: pass cell memory in
Change the dm_bio_prison interface so that instead of allocating memory
internally, dm_bio_detain is supplied with a pre-allocated cell each
time it is called.
This enables a subsequent patch to move the allocation of the struct
dm_bio_prison_cell outside the thin target's mapping function so it can
no longer block there.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Joe Thornber [Fri, 1 Mar 2013 22:45:50 +0000 (22:45 +0000)]
dm persistent data: add btree_walk
Add dm_btree_walk to iterate through the contents of a btree.
This will be used by the dm cache target.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Alasdair G Kergon [Fri, 1 Mar 2013 22:45:49 +0000 (22:45 +0000)]
dm: add target num_write_bios fn
Add a num_write_bios function to struct target.
If an instance of a target sets this, it will be queried before the
target's mapping function is called on a write bio, and the response
controls the number of copies of the write bio that the target will
receive.
This provides a convenient way for a target to send the same data to
more than one device. The new cache target uses this in writethrough
mode, to send the data both to the cache and the backing device.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 1 Mar 2013 22:45:49 +0000 (22:45 +0000)]
dm kcopyd: introduce configurable throttling
This patch allows the administrator to reduce the rate at which kcopyd
issues I/O.
Each module that uses kcopyd acquires a throttle parameter that can be
set in /sys/module/*/parameters.
We maintain a history of kcopyd usage by each module in the variables
io_period and total_period in struct dm_kcopyd_throttle. The actual
kcopyd activity is calculated as a percentage of time equal to
"(100 * io_period / total_period)". This is compared with the user-defined
throttle percentage threshold and if it is exceeded, we sleep.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 1 Mar 2013 22:45:49 +0000 (22:45 +0000)]
dm ioctl: allow message to return data
This patch introduces enhanced message support that allows the
device-mapper core to recognise messages that are common to all devices,
and for messages to return data to userspace.
Core messages are processed by the function "message_for_md". If the
device mapper doesn't support the message, it is passed to the target
driver.
If the message returns data, the kernel sets the flag
DM_MESSAGE_OUT_FLAG.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 1 Mar 2013 22:45:49 +0000 (22:45 +0000)]
dm ioctl: optimize functions without variable params
Device-mapper ioctls receive and send data in a buffer supplied
by userspace. The buffer has two parts. The first part contains
a 'struct dm_ioctl' and has a fixed size. The second part depends
on the ioctl and has a variable size.
This patch recognises the specific ioctls that do not use the variable
part of the buffer and skips allocating memory for it.
In particular, when a device is suspended and a resume ioctl is sent,
this now avoid memory allocation completely.
The variable "struct dm_ioctl tmp" is moved from the function
copy_params to its caller ctl_ioctl and renamed to param_kernel.
It is used directly when the ioctl function doesn't need any arguments.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 1 Mar 2013 22:45:48 +0000 (22:45 +0000)]
dm ioctl: introduce ioctl_flags
This patch introduces flags for each ioctl function.
So far, one flag is defined, IOCTL_FLAGS_NO_PARAMS. It is set if the
function processing the ioctl doesn't take or produce any parameters in
the section of the data buffer that has a variable size.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Jun'ichi Nomura [Fri, 1 Mar 2013 22:45:48 +0000 (22:45 +0000)]
dm: merge io_pool and tio_pool
This patch merges io_pool and tio_pool into io_pool and cleans up
related functions.
Though device-mapper used to have 2 pools of objects for each dm device,
the use of bioset frontbad for per-bio data has shrunk the number of
pools to 1 for both bio-based and request-based device types.
(See
c0820cf5 "dm: introduce per_bio_data" and
94818742 "dm: Use bioset's front_pad for dm_rq_clone_bio_info")
So dm no longer has to maintain 2 different pointers.
No functional changes.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Jun'ichi Nomura [Fri, 1 Mar 2013 22:45:48 +0000 (22:45 +0000)]
dm: remove unused _rq_bio_info_cache
Remove _rq_bio_info_cache, which is no longer used.
No functional changes.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Christie [Fri, 1 Mar 2013 22:45:48 +0000 (22:45 +0000)]
dm: fix limits initialization when there are no data devices
dm_calculate_queue_limits will first reset the provided limits to
defaults using blk_set_stacking_limits; whereby defeating the purpose of
retaining the original live table's limits -- as was intended via commit
3ae706561637331aa578e52bb89ecbba5edcb7a9 ("dm: retain table limits when
swapping to new table with no devices").
Fix this improper limits initialization (in the no data devices case) by
avoiding the call to dm_calculate_queue_limits.
[patch header revised by Mike Snitzer]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # v3.6+
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 1 Mar 2013 22:45:47 +0000 (22:45 +0000)]
dm snapshot: add missing module aliases
Add module aliases so that autoloading works correctly if the user
tries to activate "snapshot-origin" or "snapshot-merge" targets.
Reference: https://bugzilla.redhat.com/889973
Reported-by: Chao Yang <chyang@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Fri, 1 Mar 2013 22:45:47 +0000 (22:45 +0000)]
dm persistent data: set some btree fn parms const
Mark some constant parameters constant in some dm-btree functions.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Alasdair G Kergon [Fri, 1 Mar 2013 22:45:47 +0000 (22:45 +0000)]
dm: refactor bio cloning
Refactor part of the bio splitting and cloning code to try to make it
easier to understand.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Alasdair G Kergon [Fri, 1 Mar 2013 22:45:47 +0000 (22:45 +0000)]
dm: rename bio cloning functions
Rename functions involved in splitting and cloning bios.
The sequence of functions is now:
(1) __split_and_process* - entry point that selects the processing strategy
(2) __send* - prepare the details for each bio needed and loop through them
(3) __clone_and_map* - creates a clone and maps it
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Alasdair G Kergon [Fri, 1 Mar 2013 22:45:47 +0000 (22:45 +0000)]
dm: rename request variables to bios
Use 'bio' in the name of variables and functions that deal with
bios rather than 'request' to avoid confusion with the normal
block layer use of 'request'.
No functional changes.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Alasdair G Kergon [Fri, 1 Mar 2013 22:45:46 +0000 (22:45 +0000)]
dm: clean up clone_bio
Remove the no-longer-used struct bio_set argument from clone_bio and split_bvec.
Use tio->ti in __map_bio() instead of passing in ti.
Factor out some code for setting up cloned bios.
Take target_request_nr as a parameter to alloc_tio().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Kees Cook [Fri, 1 Mar 2013 22:45:46 +0000 (22:45 +0000)]
dm persistent data: remove CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Alasdair G Kergon [Fri, 1 Mar 2013 22:45:46 +0000 (22:45 +0000)]
dm: remove CONFIG_EXPERIMENTAL
Remove EXPERIMENTAL from all existing device-mapper targets.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Fri, 1 Mar 2013 22:45:45 +0000 (22:45 +0000)]
dm thin: use block_size_is_power_of_two
Use block_size_is_power_of_two() rather than checking
sectors_per_block_shift directly. Also introduce local pool variable in
get_bio_block() to eliminate redundant tc->pool dereferences.
No functional change.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 1 Mar 2013 22:45:45 +0000 (22:45 +0000)]
dm bufio: use WRITE_FLUSH instead of REQ_FLUSH
Use WRITE_FLUSH instead of REQ_FLUSH for submitted requests to make it
consistent with the rest of the kernel. There is no functional change.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Wang Sheng-Hui [Fri, 1 Mar 2013 22:45:45 +0000 (22:45 +0000)]
dm table: remove superfluous variable reset
If allocation fails, the local var *t is not used any more after kfree.
Don't need to reset it to NULL. Remove the unnecesary NULL set here.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Fri, 1 Mar 2013 22:45:44 +0000 (22:45 +0000)]
dm thin: support a non power of 2 discard_granularity
Support a non-power-of-2 discard granularity in dm-thin, now that the block
layer supports this(via
8dd2cb7e880d2f77fba53b523c99133ad5054cfd "block:
discard granularity might not be power of 2" and
59771079c18c44e39106f0f30054025acafadb41 "blk: avoid divide-by-zero with zero
discard granularity").
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 1 Mar 2013 22:45:44 +0000 (22:45 +0000)]
dm: fix truncated status strings
Avoid returning a truncated table or status string instead of setting
the DM_BUFFER_FULL_FLAG when the last target of a table fills the
buffer.
When processing a table or status request, the function retrieve_status
calls ti->type->status. If ti->type->status returns non-zero,
retrieve_status assumes that the buffer overflowed and sets
DM_BUFFER_FULL_FLAG.
However, targets don't return non-zero values from their status method
on overflow. Most targets returns always zero.
If a buffer overflow happens in a target that is not the last in the
table, it gets noticed during the next iteration of the loop in
retrieve_status; but if a buffer overflow happens in the last target, it
goes unnoticed and erroneously truncated data is returned.
In the current code, the targets behave in the following way:
* dm-crypt returns -ENOMEM if there is not enough space to store the
key, but it returns 0 on all other overflows.
* dm-thin returns errors from the status method if a disk error happened.
This is incorrect because retrieve_status doesn't check the error
code, it assumes that all non-zero values mean buffer overflow.
* all the other targets always return 0.
This patch changes the ti->type->status function to return void (because
most targets don't use the return code). Overflow is detected in
retrieve_status: if the status method fills up the remaining space
completely, it is assumed that buffer overflow happened.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Jun'ichi Nomura [Fri, 1 Mar 2013 22:45:44 +0000 (22:45 +0000)]
dm: do not replace bioset for request based dm
This patch fixes a regression introduced in v3.8, which causes oops
like this when dm-multipath is used:
general protection fault: 0000 [#1] SMP
RIP: 0010:[<
ffffffff810fe754>] [<
ffffffff810fe754>] mempool_free+0x24/0xb0
Call Trace:
<IRQ>
[<
ffffffff81187417>] bio_put+0x97/0xc0
[<
ffffffffa02247a5>] end_clone_bio+0x35/0x90 [dm_mod]
[<
ffffffff81185efd>] bio_endio+0x1d/0x30
[<
ffffffff811f03a3>] req_bio_endio.isra.51+0xa3/0xe0
[<
ffffffff811f2f68>] blk_update_request+0x118/0x520
[<
ffffffff811f3397>] blk_update_bidi_request+0x27/0xa0
[<
ffffffff811f343c>] blk_end_bidi_request+0x2c/0x80
[<
ffffffff811f34d0>] blk_end_request+0x10/0x20
[<
ffffffffa000b32b>] scsi_io_completion+0xfb/0x6c0 [scsi_mod]
[<
ffffffffa000107d>] scsi_finish_command+0xbd/0x120 [scsi_mod]
[<
ffffffffa000b12f>] scsi_softirq_done+0x13f/0x160 [scsi_mod]
[<
ffffffff811f9fd0>] blk_done_softirq+0x80/0xa0
[<
ffffffff81044551>] __do_softirq+0xf1/0x250
[<
ffffffff8142ee8c>] call_softirq+0x1c/0x30
[<
ffffffff8100420d>] do_softirq+0x8d/0xc0
[<
ffffffff81044885>] irq_exit+0xd5/0xe0
[<
ffffffff8142f3e3>] do_IRQ+0x63/0xe0
[<
ffffffff814257af>] common_interrupt+0x6f/0x6f
<EOI>
[<
ffffffffa021737c>] srp_queuecommand+0x8c/0xcb0 [ib_srp]
[<
ffffffffa0002f18>] scsi_dispatch_cmd+0x148/0x310 [scsi_mod]
[<
ffffffffa000a38e>] scsi_request_fn+0x31e/0x520 [scsi_mod]
[<
ffffffff811f1e57>] __blk_run_queue+0x37/0x50
[<
ffffffff811f1f69>] blk_delay_work+0x29/0x40
[<
ffffffff81059003>] process_one_work+0x1c3/0x5c0
[<
ffffffff8105b22e>] worker_thread+0x15e/0x440
[<
ffffffff8106164b>] kthread+0xdb/0xe0
[<
ffffffff8142db9c>] ret_from_fork+0x7c/0xb0
The regression was introduced by the change
c0820cf5 "dm: introduce per_bio_data", where dm started to replace
bioset during table replacement.
For bio-based dm, it is good because clone bios do not exist during the
table replacement.
For request-based dm, however, (not-yet-mapped) clone bios may stay in
request queue and survive during the table replacement.
So freeing the old bioset could cause the oops in bio_put().
Since the size of front_pad may change only with bio-based dm,
it is not necessary to replace bioset for request-based dm.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Randy Dunlap [Fri, 1 Mar 2013 19:11:47 +0000 (11:11 -0800)]
hsi: fix kernel-doc warnings
Fix kernel-doc warnings in hsi files:
Warning(include/linux/hsi/hsi.h:136): Excess struct/union/enum/typedef member 'e_handler' description in 'hsi_client'
Warning(include/linux/hsi/hsi.h:136): Excess struct/union/enum/typedef member 'pclaimed' description in 'hsi_client'
Warning(include/linux/hsi/hsi.h:136): Excess struct/union/enum/typedef member 'nb' description in 'hsi_client'
Warning(drivers/hsi/hsi.c:434): No description found for parameter 'handler'
Warning(drivers/hsi/hsi.c:434): Excess function parameter 'cb' description in 'hsi_register_port_event'
Don't document "private:" fields with kernel-doc notation.
If you want to leave them fully documented, that's OK, but
then don't mark them as "private:".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Carlos Chinea <carlos.chinea@nokia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 1 Mar 2013 20:05:13 +0000 (12:05 -0800)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"Four cifs fixes (including for kernel bug #53221 and samba bug #9519)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: bugfix for unreclaimed writeback pages in cifs_writev_requeue()
cifs: set MAY_SIGN when sec=krb5
POSIX extensions disabled on client due to illegal O_EXCL flag sent to Samba
cifs: ensure that cifs_get_root() only traverses directories
Tim Gardner [Fri, 1 Mar 2013 11:46:48 +0000 (19:46 +0800)]
autofs4 - autofs4_catatonic_mode(): remove redundant null check on kfree()
smatch analysis:
fs/autofs4/waitq.c:46 autofs4_catatonic_mode() info: redundant null check on wq->name.name calling kfree()
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: autofs@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Huewe [Fri, 1 Mar 2013 11:46:40 +0000 (19:46 +0800)]
autofs - Fix sparse warning: context imbalance in autofs4_d_automount() different lock contexts for basic block
Sparse complains:
fs/autofs4/root.c:409:9: sparse: context imbalance in 'autofs4_d_automount' - different lock contexts for basic block
This was introduced by commit
f55fb0c24386 ("autofs4 - dont clear
DCACHE_NEED_AUTOMOUNT on rootless mount")
The function autofs4_d_automount can be left with the (&sbi->fs_lock)
held if sbi->version <= 4 and simple_empty(dentry) == false so the
warning seems valid.
--> Add an spin_unlock in this case before we jump to done
Unfortunately compile tested only.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
James Bottomley [Fri, 1 Mar 2013 09:09:51 +0000 (09:09 +0000)]
[SCSI] Merge tag 'fcoe-02-19-13' into for-linus
FCoE Updates for 3.9
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
James Bottomley [Fri, 1 Mar 2013 09:08:44 +0000 (09:08 +0000)]
Merge tag 'uapi-
20121219' into for-linus
UAPI Disintegration 2012-12-19
This is the remaining SCSI part of the UAPI
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Linus Torvalds [Fri, 1 Mar 2013 04:45:52 +0000 (20:45 -0800)]
Merge tag 'lzo-update-signature-
20130226' of git://github.com/markus-oberhumer/linux
Pull LZO compression update from Markus Oberhumer:
"Summary:
========
Update the Linux kernel LZO compression and decompression code to the
current upstream version which features significant performance
improvements on modern machines.
Some *synthetic* benchmarks:
============================
x86_64 (Sandy Bridge), gcc-4.6 -O3, Silesia test corpus, 256 kB block-size:
compression speed decompression speed
LZO-2005 : 150 MB/sec 468 MB/sec
LZO-2012 : 434 MB/sec 1210 MB/sec
i386 (Sandy Bridge), gcc-4.6 -O3, Silesia test corpus, 256 kB block-size:
compression speed decompression speed
LZO-2005 : 143 MB/sec 409 MB/sec
LZO-2012 : 372 MB/sec 1121 MB/sec
armv7 (Cortex-A9), Linaro gcc-4.6 -O3, Silesia test corpus, 256 kB block-size:
compression speed decompression speed
LZO-2005 : 27 MB/sec 84 MB/sec
LZO-2012 : 44 MB/sec 117 MB/sec
**LZO-2013-UA : 47 MB/sec 167 MB/sec
Legend:
LZO-2005 : LZO version in current 3.8 kernel (which is based on
the LZO 2.02 release from 2005)
LZO-2012 : updated LZO version available in linux-next
**LZO-2013-UA : updated LZO version available in linux-next plus experimental
ARM Unaligned Access patch. This needs approval
from some ARM maintainer ist NOT YET INCLUDED."
Andrew Morton <akpm@linux-foundation.org> acks it and says:
"There's a new LZ4 on the block which is even faster than the sped-up
LZO, but various filesystems and things use LZO"
* tag 'lzo-update-signature-
20130226' of git://github.com/markus-oberhumer/linux:
crypto: testmgr - update LZO compression test vectors
lib/lzo: Update LZO compression to current upstream version
lib/lzo: Rename lzo1x_decompress.c to lzo1x_decompress_safe.c
Linus Torvalds [Fri, 1 Mar 2013 04:44:23 +0000 (20:44 -0800)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull one kvm bugfix from Gleb Natapov.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/kvm: Fix pvclock vsyscall fixmap
Linus Torvalds [Fri, 1 Mar 2013 04:42:33 +0000 (20:42 -0800)]
Merge branch 'linux_next' of git://git./linux/kernel/git/mchehab/linux-edac
Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab:
"For:
- Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac);
- error injection support for i5100, when EDAC debug is enabled;
- fix edac when it is loaded builtin (early init for the subsystem);
- a "Firmware First" EDAC driver, allowing ghes to report errors via
EDAC (ghes-edac).
With regards to ghes-edac, this fixes a longstanding BZ at Red Hat
that happens with Nehalem and Sandy Bridge CPUs: when both GHES and
i7core_edac or sb_edac are running, the error reports are
unpredictable, as both BIOS and OS race to access the registers. With
ghes-edac, the EDAC core will refuse to register any other concurrent
memory error driver.
This patchset moves the ghes struct definitions to a separate header
file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to
register/unregister and to report errors via ghes-edac. Those changes
were acked by ghes driver maintainer (Huang)."
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits)
i5100_edac: convert to use simple_open()
ghes_edac: fix to use list_for_each_entry_safe() when delete list items
ghes_edac: Fix RAS tracing
ghes_edac: Make it compliant with UEFI spec 2.3.1
ghes_edac: Improve driver's printk messages
ghes_edac: Don't credit the same memory dimm twice
ghes_edac: do a better job of filling EDAC DIMM info
ghes_edac: add support for reporting errors via EDAC
ghes_edac: Register at EDAC core the BIOS report
ghes: add the needed hooks for EDAC error report
ghes: move structures/enum to a header file
edac: add support for error type "Info"
edac: add support for raw error reports
edac: reduce stack pressure by using a pre-allocated buffer
edac: lock module owner to avoid error report conflicts
edac: remove proc_name from mci structure
edac: add a new memory layer type
edac: initialize the core earlier
edac: better report error conditions in debug mode
i5100_edac: Remove two checkpatch warnings
...
Linus Torvalds [Fri, 1 Mar 2013 04:23:09 +0000 (20:23 -0800)]
Fix mis-merge of intel_powerclamp.c resulting in compile error
The new intel_powerclamp thermal cooling device driver was merged in
commit
2af78448fff6 (Pull thermal management updates from Zhang Rui)
without any data conflicts. But there was a more subtle conflict I
missed: the driver uses MAX_USER_RT_PRIO, but commit
8bd75c77b7c6
("sched/rt: Move rt specific bits into new header file") had moved that
define from <linux/sched.h> to <linux/sched/rt.h>.
Which caused this build failure:
drivers/thermal/intel_powerclamp.c: In function ‘clamp_thread’:
drivers/thermal/intel_powerclamp.c:360:21: error: ‘MAX_USER_RT_PRIO’ undeclared (first use in this function)
drivers/thermal/intel_powerclamp.c:360:21: note: each undeclared identifier is reported only once for each function it appears in
And because I don't do a full "make allmodconfig" build after each pull,
I didn't notice until too late. So now the fix is here, separately from
the merge commit.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 1 Mar 2013 04:09:24 +0000 (20:09 -0800)]
Merge tag 'late-mvebu-rebased' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC mvebu platform changes from Olof Johansson:
"This series contains changes for the Marvell EBU platforms (mvebu,
orion, kirkwood, dove) that were not part of the first set of pull
requests because of dependencies on the MMC tree, and being submitted
a little late.
Notable changes are:
- More devices get moved out of board files into device tree
descriptions. The remaining devices listed in there have patches
that will get sent for 3.10, after which we can remove a lot of the
board files entirely. We are doing the pinctrl and mmc drivers
here, ethernet and PCI still remain.
- SMP support for mvebu is improved with support for the local
interrupt controller.
- The Guruplug board file gets replaced with a DT description.
Unfortunately, the dependency on the MMC tree turned out to be a much
larger problem than expected, when the MMC maintainer rebased the
patches in his tree that all of the patches in this branch are based
on, which caused merge conflicts between the new and old versions of
those patches.
To work around the merge conflicts, this branch rebases all patches on
top of the respective MMC patches that did get merged into 3.9. The
patches are all identical to the versions that were part of
linux-next, but have a new commit date."
* tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits)
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
ARM: kirkwood: topkick: init mvsdio via DT
ARM: kirkwood: nsa310: convert to pinctrl
ARM: Kirkwood: topkick: Enable i2c bus.
ARM: kirkwood: topkick: convert to pinctrl
ARM: dove: convert serial DT nodes to clocks property
arm: mvebu: Add SPI flash on Armada 370 DB board
arm: mvebu: Add SPI flash on Armada XP-DB board
arm: mvebu: Add SPI flash on Armada XP-GP board
arm: mvebu: Add support for SPI controller in Armada 370/XP
clocksource: update and move armada-370-xp-timer documentation to timer directory
arm: mvebu: update DT to support local timers
ARM: Dove: convert usb host controller to DT
arm: mvebu: Enable USB controllers on Armada 370/XP boards
arm: mvebu: Add support for USB host controllers in Armada 370/XP
arm: mvebu: add button for OpenBlocks AX3-4
ARM: Kirkwood: Convert NS2 to gpio-poweroff.
ARM: Kirkwood: Convert NSA310 I2C to device tree
ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
ARM: Kirkwood: Convert NSA310 to DT based regulators.
...
Linus Torvalds [Fri, 1 Mar 2013 04:00:40 +0000 (20:00 -0800)]
Merge tag 'late-omap' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC late OMAP changes from Olof Johansson:
"This branch contains changes for OMAP that came in late during the
release staging, close to when the merge window opened.
It contains, among other things:
- OMAP PM fixes and some patches for audio device integration
- OMAP clock fixes related to common clock conversion
- A set of patches cleaning up WFI entry and blocking.
- A set of fixes and IP block support for PM on TI AM33xx SoCs
(Beaglebone, etc)
- A set of smaller fixes and cleanups around AM33xx restart and
revision detection, as well as removal of some dead code
(CONFIG_32K_TIMER_HZ)"
* tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
ARM: omap2: include linux/errno.h in hwmod_reset
ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
ARM: OMAP4: hwmod data: Enable AESS hwmod device
ARM: OMAP4: hwmod data: Update AESS data with memory bank area
ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
ASoC: TI AESS: add autogating-enable function, callable from architecture code
ARM: OMAP2+: hwmod: add enable_preprogram hook
ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb
ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()
ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug
ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags
ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem
ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
ARM: OMAP2+: AM33XX: Update the hardreset API
ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
...
Linus Torvalds [Fri, 1 Mar 2013 03:59:34 +0000 (19:59 -0800)]
Merge tag 'late-dt' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC i.MX DT changes from Olof Johansson:
"This branch contains of devicetree changes for the Freescale i.MX
platform.
The base patch of the branch changes the format of the dts files to a
slightly different format that makes it easier to do derivative board
definitions, but it also introduces a lot of churn in the process
since every line of the file is touched.
On top of that are a handful of the regular changes; enabling more
boards as DT-based instead of legacy board files (mx25pdk), enabling
another driver for devicetree and thus adding bindings (onewire), etc.
I'm not happy about the churn, and will likely not take it for other
platforms in the future."
* tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
ARM: dts: add dtsi for imx6q and imx6dl
ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
ARM: dts: i.MX6: Add regulator delay support
ARM: dts: Add device tree entry for onewire master on i.MX53
ARM: i.MX53: Add clocks for i.mx53 onewire master.
W1: Add device tree support to MXC onewire master.
ARM: imx: enable imx6q-cpufreq support
ARM: dts: Add apf51 basic support
ARM i.MX6: change mxs usbphy clock usage
ARM: dts: imx6q: Remove silicon version from SDMA firmware
ARM i.MX53: dts: add oftree for MBa53 baseboard
ARM i.MX53: add dts for the TQ tqma53 module
ARM: dts: imx53: pinctrl update
ARM i.MX51 babbage: Add keypad support
ARM: dts: imx: Add imx51 KPP entry
ARM: dts: imx25-karo-tx25: Put status entry in the end
ARM: mx25pdk: Add device tree support
ARM: dts: imx: use nodes label in board dts
ARM: dts: add missing imx dtb targets
ARM: boot: dts: Add an entry for imx27-pdk.dtb
...
Linus Torvalds [Fri, 1 Mar 2013 03:48:26 +0000 (19:48 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
"Highlights:
- introduction of Dove thermal sensor driver.
- introduction of Kirkwood thermal sensor driver.
- introduction of intel_powerclamp thermal cooling device driver.
- add interrupt and DT support for rcar thermal driver.
- add thermal emulation support which allows platform thermal driver
to do software/hardware emulation for thermal issues."
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
thermal: rcar: remove __devinitconst
thermal: return an error on failure to register thermal class
Thermal: rename thermal governor Kconfig option to avoid generic naming
thermal: exynos: Use the new thermal trend type for quick cooling action.
Thermal: exynos: Add support for temperature falling interrupt.
Thermal: Dove: Add Themal sensor support for Dove.
thermal: Add support for the thermal sensor on Kirkwood SoCs
thermal: rcar: add Device Tree support
thermal: rcar: remove machine_power_off() from rcar_thermal_notify()
thermal: rcar: add interrupt support
thermal: rcar: add read/write functions for common/priv data
thermal: rcar: multi channel support
thermal: rcar: use mutex lock instead of spin lock
thermal: rcar: enable CPCTL to use hardware TSC deciding
thermal: rcar: use parenthesis on macro
Thermal: fix a build warning when CONFIG_THERMAL_EMULATION cleared
Thermal: fix a wrong comment
thermal: sysfs: Add a new sysfs node emul_temp for thermal emulation
PM: intel_powerclamp: off by one in start_power_clamp()
thermal: exynos: Miscellaneous fixes to support falling threshold interrupt
...
Linus Torvalds [Fri, 1 Mar 2013 03:43:13 +0000 (19:43 -0800)]
Merge tag 'tag-for-linus-3.9' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf
Pull dma-buf framework updates from Sumit Semwal:
"Refcounting implemented for vmap in core dma-buf"
* tag 'tag-for-linus-3.9' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf:
CHROMIUM: dma-buf: restore args on failure of dma_buf_mmap
dma-buf: implement vmap refcounting in the interface logic
Linus Torvalds [Fri, 1 Mar 2013 02:02:55 +0000 (18:02 -0800)]
Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux
Pull nfsd changes from J Bruce Fields:
"Miscellaneous bugfixes, plus:
- An overhaul of the DRC cache by Jeff Layton. The main effect is
just to make it larger. This decreases the chances of intermittent
errors especially in the UDP case. But we'll need to watch for any
reports of performance regressions.
- Containerized nfsd: with some limitations, we now support
per-container nfs-service, thanks to extensive work from Stanislav
Kinsbursky over the last year."
Some notes about conflicts, since there were *two* non-data semantic
conflicts here:
- idr_remove_all() had been added by a memory leak fix, but has since
become deprecated since idr_destroy() does it for us now.
- xs_local_connect() had been added by this branch to make AF_LOCAL
connections be synchronous, but in the meantime Trond had changed the
calling convention in order to avoid a RCU dereference.
There were a couple of more obvious actual source-level conflicts due to
the hlist traversal changes and one just due to code changes next to
each other, but those were trivial.
* 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits)
SUNRPC: make AF_LOCAL connect synchronous
nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
svcrpc: fix rpc server shutdown races
svcrpc: make svc_age_temp_xprts enqueue under sv_lock
lockd: nlmclnt_reclaim(): avoid stack overflow
nfsd: enable NFSv4 state in containers
nfsd: disable usermode helper client tracker in container
nfsd: use proper net while reading "exports" file
nfsd: containerize NFSd filesystem
nfsd: fix comments on nfsd_cache_lookup
SUNRPC: move cache_detail->cache_request callback call to cache_read()
SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
SUNRPC: rework cache upcall logic
SUNRPC: introduce cache_detail->cache_request callback
NFS: simplify and clean cache library
NFS: use SUNRPC cache creation and destruction helper for DNS cache
nfsd4: free_stid can be static
nfsd: keep a checksum of the first 256 bytes of request
sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
sunrpc: fix comment in struct xdr_buf definition
...
Linus Torvalds [Fri, 1 Mar 2013 01:43:09 +0000 (17:43 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
"A few groups of patches here. Alex has been hard at work improving
the RBD code, layout groundwork for understanding the new formats and
doing layering. Most of the infrastructure is now in place for the
final bits that will come with the next window.
There are a few changes to the data layout. Jim Schutt's patch fixes
some non-ideal CRUSH behavior, and a set of patches from me updates
the client to speak a newer version of the protocol and implement an
improved hashing strategy across storage nodes (when the server side
supports it too).
A pair of patches from Sam Lang fix the atomicity of open+create
operations. Several patches from Yan, Zheng fix various mds/client
issues that turned up during multi-mds torture tests.
A final set of patches expose file layouts via virtual xattrs, and
allow the policies to be set on directories via xattrs as well
(avoiding the awkward ioctl interface and providing a consistent
interface for both kernel mount and ceph-fuse users)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits)
libceph: add support for HASHPSPOOL pool flag
libceph: update osd request/reply encoding
libceph: calculate placement based on the internal data types
ceph: update support for PGID64, PGPOOL3, OSDENC protocol features
ceph: update "ceph_features.h"
libceph: decode into cpu-native ceph_pg type
libceph: rename ceph_pg -> ceph_pg_v1
rbd: pass length, not op for osd completions
rbd: move rbd_osd_trivial_callback()
libceph: use a do..while loop in con_work()
libceph: use a flag to indicate a fault has occurred
libceph: separate non-locked fault handling
libceph: encapsulate connection backoff
libceph: eliminate sparse warnings
ceph: eliminate sparse warnings in fs code
rbd: eliminate sparse warnings
libceph: define connection flag helpers
rbd: normalize dout() calls
rbd: barriers are hard
rbd: ignore zero-length requests
...
Linus Torvalds [Thu, 28 Feb 2013 21:21:44 +0000 (13:21 -0800)]
Merge tag 'writeback-fixes' of git://git./linux/kernel/git/wfg/linux
Pull writeback fixes from Wu Fengguang:
"Two writeback fixes
- fix negative (setpoint - dirty) in 32bit archs
- use down_read_trylock() in writeback_inodes_sb(_nr)_if_idle()"
* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
Negative (setpoint-dirty) in bdi_position_ratio()
vfs: re-implement writeback_inodes_sb(_nr)_if_idle() and rename them
Linus Torvalds [Thu, 28 Feb 2013 21:16:07 +0000 (13:16 -0800)]
Merge branch 'for-3.9/drivers' of git://git.kernel.dk/linux-block
Pull block driver bits from Jens Axboe:
"After the block IO core bits are in, please grab the driver updates
from below as well. It contains:
- Fix ancient regression in dac960. Nobody must be using that
anymore...
- Some good fixes from Guo Ghao for loop, fixing both potential
oopses and deadlocks.
- Improve mtip32xx for NUMA systems, by being a bit more clever in
distributing work.
- Add IBM RamSan 70/80 driver. A second round of fixes for that is
pending, that will come in through for-linus during the 3.9 cycle
as per usual.
- A few xen-blk{back,front} fixes from Konrad and Roger.
- Other minor fixes and improvements."
* 'for-3.9/drivers' of git://git.kernel.dk/linux-block:
loopdev: ignore negative offset when calculate loop device size
loopdev: remove an user triggerable oops
loopdev: move common code into loop_figure_size()
loopdev: update block device size in loop_set_status()
loopdev: fix a deadlock
xen-blkback: use balloon pages for persistent grants
xen-blkfront: drop the use of llist_for_each_entry_safe
xen/blkback: Don't trust the handle from the frontend.
xen-blkback: do not leak mode property
block: IBM RamSan 70/80 driver fixes
rsxx: add slab.h include to dma.c
drivers/block/mtip32xx: add missing GENERIC_HARDIRQS dependency
block: remove new __devinit/exit annotations on ramsam driver
block: IBM RamSan 70/80 device driver
drivers/block/mtip32xx/mtip32xx.c:1726:5: sparse: symbol 'mtip_send_trim' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:4029:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static?
dac960: return success instead of -ENOTTY
mtip32xx: add trim support
mtip32xx: Add workqueue and NUMA support
block: delete super ancient PC-XT driver for 1980's hardware
Linus Torvalds [Thu, 28 Feb 2013 20:52:24 +0000 (12:52 -0800)]
Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-block
Pull block IO core bits from Jens Axboe:
"Below are the core block IO bits for 3.9. It was delayed a few days
since my workstation kept crashing every 2-8h after pulling it into
current -git, but turns out it is a bug in the new pstate code (divide
by zero, will report separately). In any case, it contains:
- The big cfq/blkcg update from Tejun and and Vivek.
- Additional block and writeback tracepoints from Tejun.
- Improvement of the should sort (based on queues) logic in the plug
flushing.
- _io() variants of the wait_for_completion() interface, using
io_schedule() instead of schedule() to contribute to io wait
properly.
- Various little fixes.
You'll get two trivial merge conflicts, which should be easy enough to
fix up"
Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42ca: "hlist: drop the node parameter from iterators").
* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
block: remove redundant check to bd_openers()
block: use i_size_write() in bd_set_size()
cfq: fix lock imbalance with failed allocations
drivers/block/swim3.c: fix null pointer dereference
block: don't select PERCPU_RWSEM
block: account iowait time when waiting for completion of IO request
sched: add wait_for_completion_io[_timeout]
writeback: add more tracepoints
block: add block_{touch|dirty}_buffer tracepoint
buffer: make touch_buffer() an exported function
block: add @req to bio_{front|back}_merge tracepoints
block: add missing block_bio_complete() tracepoint
block: Remove should_sort judgement when flush blk_plug
block,elevator: use new hashtable implementation
cfq-iosched: add hierarchical cfq_group statistics
cfq-iosched: collect stats from dead cfqgs
cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
block: RCU free request_queue
blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
...
Linus Torvalds [Thu, 28 Feb 2013 20:43:43 +0000 (12:43 -0800)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull first round of SCSI updates from James Bottomley:
"The patch set is mostly driver updates (bnx2fc, ipr, lpfc, qla4) and a
few bug fixes"
Pull delayed because google hates James, and sneakily considers his pull
requests spam. Why, google, why?
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (60 commits)
[SCSI] aacraid: 1024 max outstanding command support for Series 7 and above
[SCSI] bnx2fc: adjust duplicate test
[SCSI] qla4xxx: Update driver version to 5.03.00-k4
[SCSI] qla4xxx: Fix return code for qla4xxx_session_get_param.
[SCSI] qla4xxx: wait for boot target login response during probe.
[SCSI] qla4xxx: Added support for force firmware dump
[SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapter
[SCSI] qla4xxx: Throttle active IOCBs to firmware limits
[SCSI] qla4xxx: Remove unnecessary code from qla4xxx_init_local_data
[SCSI] qla4xxx: Quiesce driver activities while loopback
[SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to MBOX_ASTS_IDC_REQUEST_NOTIFICATION
[SCSI] qla4xxx: Add spurious interrupt messages under debug level 2
[SCSI] cxgb4i: Remove the scsi host device when removing device
[SCSI] bfa: fix strncpy() limiter in bfad_start_ops()
[SCSI] qla4xxx: Update driver version to 5.03.00-k3
[SCSI] qla4xxx: Correct the validation to check in get_sys_info mailbox
[SCSI] qla4xxx: Pass correct function param to qla4_8xxx_rd_direct
[SCSI] lpfc 8.3.37: Update lpfc version for 8.3.37 driver release
[SCSI] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get.
[SCSI] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource count
...
Florian Fainelli [Fri, 1 Feb 2013 10:38:28 +0000 (11:38 +0100)]
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
The Armada 370 Reference Design board has one SD card slot, directly
connected to the SDIO IP of the SoC, so we enable this IP. there are no
GPIOs for card-detect and write-protect so we do not specify any.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Jason Cooper [Sat, 26 Jan 2013 20:50:10 +0000 (20:50 +0000)]
ARM: kirkwood: topkick: init mvsdio via DT
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Jason Cooper [Sat, 26 Jan 2013 20:50:14 +0000 (20:50 +0000)]
ARM: kirkwood: nsa310: convert to pinctrl
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Andrew Lunn [Sat, 26 Jan 2013 20:50:12 +0000 (20:50 +0000)]
ARM: Kirkwood: topkick: Enable i2c bus.
Add a DT node for I2C and pinctrl hog for the pins. There appears to
be an i2c bus on topkick with a device on it:
i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- 64 -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Jason Cooper [Sat, 26 Jan 2013 20:50:11 +0000 (20:50 +0000)]
ARM: kirkwood: topkick: convert to pinctrl
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Tue, 29 Jan 2013 20:59:46 +0000 (21:59 +0100)]
ARM: dove: convert serial DT nodes to clocks property
of_serial now has support for using clocks property and we have
a DT clock provider. This patch replaces the hard coded clock-frequency
property with a clocks phandle to tclk.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Tue, 5 Feb 2013 20:54:55 +0000 (21:54 +0100)]
arm: mvebu: Add SPI flash on Armada 370 DB board
This patch add support for the SPI flash MX25l25635E which is present
on the Armada 370 DB board. This flash stores the bootloader and its
environment.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Tue, 5 Feb 2013 20:54:54 +0000 (21:54 +0100)]
arm: mvebu: Add SPI flash on Armada XP-DB board
This patch add support for the SPI flash M25P64 which is present on
the Armada XP DB board. This flash stores the bootloader and its
environment.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Wed, 6 Feb 2013 13:06:23 +0000 (10:06 -0300)]
arm: mvebu: Add SPI flash on Armada XP-GP board
This patch adds an SPI master device node for Armada XP-GP board.
This master node is an SPI flash controller 'n25q128a13'.
Since there is no 'partitions' node declared, one full sized
partition named as the device will be created.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Tested-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Wed, 6 Feb 2013 13:06:21 +0000 (10:06 -0300)]
arm: mvebu: Add support for SPI controller in Armada 370/XP
The Armada 370 and Armada XP SoC has an SPI controller.
This patch adds support for this controller in Armada 370
and Armada XP SoC common device tree files.
Note that the Armada XP SPI register length is 0x50 bytes,
while Armada 370 SPI register length is 0x28 bytes,
so we choose the smaller of the two.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Acked-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Fri, 25 Jan 2013 17:32:45 +0000 (18:32 +0100)]
clocksource: update and move armada-370-xp-timer documentation to timer directory
Timer driver for Armada 370 and Armada XP have gained local timers
support. So it needs new resources information regarding the IRQs
and the registers.
Also move the documentation in the new and more accurate directory
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Fri, 25 Jan 2013 17:32:44 +0000 (18:32 +0100)]
arm: mvebu: update DT to support local timers
Now that the time-armada-370-xp support local timers, updated the
device tree to take it into account.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Mon, 28 Jan 2013 15:54:08 +0000 (16:54 +0100)]
ARM: Dove: convert usb host controller to DT
With DT support for orion-ehci also convert Dove to it and
remove the legacy calls and clock aliases.
This patch is based on "ARM: Dove: split legacy and DT setup"
applied to mvebu/boards recently.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Wed, 23 Jan 2013 15:26:31 +0000 (12:26 -0300)]
arm: mvebu: Enable USB controllers on Armada 370/XP boards
This patch activates every USB port provided by each SoC.
Except for Armada XP Openblocks AX3-4 board,
where we enable only the first two USB ports
until we have more information on the third one usage.
Cc: Lior Amsalem <alior@marvell.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Wed, 23 Jan 2013 15:26:30 +0000 (12:26 -0300)]
arm: mvebu: Add support for USB host controllers in Armada 370/XP
The Armada 370 and Armada XP SoC has an Orion EHCI USB controller.
This patch adds support for this controller in Armada 370
and Armada XP SoC common device tree files.
Cc: Lior Amsalem <alior@marvell.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Mon, 7 Jan 2013 16:29:58 +0000 (17:29 +0100)]
arm: mvebu: add button for OpenBlocks AX3-4
The OpenBlocks AX3-4 board has one software-controlled button on the
front side, labeled "INIT", so we add minimal support for this button
in the kernel.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Andrew Lunn [Fri, 28 Dec 2012 14:14:10 +0000 (15:14 +0100)]
ARM: Kirkwood: Convert NS2 to gpio-poweroff.
Remove C code and add a Device Tree node in its place.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Andrew Lunn [Fri, 28 Dec 2012 14:08:50 +0000 (15:08 +0100)]
ARM: Kirkwood: Convert NSA310 I2C to device tree
Add a sub-node into the I2C node to represent the adt7476 device.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Andrew Lunn [Fri, 28 Dec 2012 14:08:49 +0000 (15:08 +0100)]
ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
Remove the C code and add a Device Tree node for gpio-poweroff.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Andrew Lunn [Fri, 28 Dec 2012 14:08:48 +0000 (15:08 +0100)]
ARM: Kirkwood: Convert NSA310 to DT based regulators.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Thu, 27 Dec 2012 22:21:59 +0000 (23:21 +0100)]
ARM: Dove: add fixed regulator for CuBox USB power
CuBox needs to enable USB power on a gpio pin. Add a fixed regulator
to always enable usb power on boot.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Thu, 27 Dec 2012 22:21:10 +0000 (23:21 +0100)]
ARM: Dove: move CuBox led pinctrl to gpio-leds node
gpio-leds has support for pinctrl allocation, make use of it.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Nobuhiro Iwamatsu [Sun, 23 Dec 2012 02:34:37 +0000 (11:34 +0900)]
ARM: Kirkwood: Convert openblocks A6 board to pinctrl
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Nobuhiro Iwamatsu [Sun, 23 Dec 2012 02:34:36 +0000 (11:34 +0900)]
ARM: Kirkwood: Add pinctrl of NAND to
88f6282
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Nobuhiro Iwamatsu [Sun, 23 Dec 2012 02:34:34 +0000 (11:34 +0900)]
ARM: Kirkwood: Add pinctrl of TWSI1 to
88f6282
The
88f6282 has one more TWSI(TWSI1). This add the information to enable
pinctl of TWSI1.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This page took 0.054113 seconds and 5 git commands to generate.