Alan Modra [Mon, 10 Mar 2014 23:00:40 +0000 (09:30 +1030)]
daily update
Cary Coutant [Mon, 10 Mar 2014 20:38:20 +0000 (13:38 -0700)]
Add function to set non-visibility part of st_other.
2014-03-10 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* symtab.h (Symbol::set_nonvis): New function.
Cary Coutant [Mon, 10 Mar 2014 20:36:40 +0000 (13:36 -0700)]
Add explicit instantiations for Sized_symbol::init_output_data.
2014-03-10 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* symtab.cc (Sized_symbol<32>::init_output_data):
Instantiate the template.
(Sized_symbol<64>::init_output_data): Likewise.
Cary Coutant [Mon, 10 Mar 2014 20:35:53 +0000 (13:35 -0700)]
Allow target to adjust dynamic symbol value.
2014-03-10 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* symtab.cc (Symbol_table::sized_write_globals): Allow a target to
adjust dynamic symbol value.
* target.h (Target::adjust_dyn_symbol): New function.
(Target::do_adjust_dyn_symbol): New function.
Cary Coutant [Mon, 10 Mar 2014 20:34:53 +0000 (13:34 -0700)]
Allow target to add custom dynamic table entries.
2014-03-10 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* output.cc (Output_data_dynamic::Dynamic_entry::write):
Get the value of DYNAMIC_CUSTOM dynamic entry.
* output.h (Output_data_dynamic::add_custom): New function.
(Dynamic_entry::Dynamic_entry): New constructor for DYNAMIC_CUSTOM
dynamic entry.
(enum Dynamic_entry::Classification): Add DYNAMIC_CUSTOM.
* target.h (Target::dynamic_tag_custom_value): New function.
(Target::do_dynamic_tag_custom_value): New function.
Cary Coutant [Mon, 10 Mar 2014 20:33:20 +0000 (13:33 -0700)]
Allow target to set dynsym indexes.
2014-03-10 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* symtab.cc (Symbol_table::set_dynsym_indexes): Allow a target to set
dynsym indexes.
* target.h (Target::has_custom_set_dynsym_indexes): New function.
(Target::do_has_custom_set_dynsym_indexes): New function.
(Target::set_dynsym_indexes): New function.
(Target::do_set_dynsym_indexes): New function.
Tristan Gingold [Mon, 10 Mar 2014 14:10:27 +0000 (15:10 +0100)]
Remove bfd/ticoff.h (unused)
2013-12-03 Tristan Gingold <gingold@adacore.com>
* ticoff.h: Remove.
Joel Brobecker [Mon, 10 Mar 2014 13:45:26 +0000 (14:45 +0100)]
Missing space before '(' in ada-lang.c::ada_evaluate_subexp
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp): Add missing space before '('
in call to TYPE_CODE macro.
Joel Brobecker [Mon, 10 Mar 2014 13:44:30 +0000 (14:44 +0100)]
Minor style change in the previous commits' ChangeLog entry.
Jerome Guitton [Wed, 12 Feb 2014 11:08:23 +0000 (12:08 +0100)]
[Ada] Full view of tagged type with ptype
When evaluating an expression, if it is of a tagged type, GDB reads
the tag in memory and deduces the full view. At parsing time, however,
this operation is done only in the case of OP_VAR_VALUE. ptype does
not go through a full evaluation of expressions so it may return some
odd results:
(gdb) print c.menu_name
$1 = 0x0
(gdb) ptype $
type = system.strings.string_access
(gdb) ptype c.menu_name
type = <void>
This change removes this peculiarity by extending the tag resolution
to UNOP_IND and STRUCTOP_STRUCT. As in the case of OP_VAR_VALUE, this
implies switching from EVAL_AVOID_SIDE_EFFECTS to EVAL_NORMAL when a
tagged type is dereferenced.
gdb/
* ada-lang.c (ada_evaluate_subexp): Resolve tagged types to
full view in the case of UNOP_IND and STRUCTOP_STRUCT.
gdb/testsuite/
* gdb.ada/tagged_access: New testcase.
Hui Zhu [Mon, 10 Mar 2014 07:42:26 +0000 (15:42 +0800)]
Remove "hardware" from comments of "target_insert_breakpoint"
This function is for simple breakpoint. So I post a patch to remove "hardware".
Thanks,
Hui
2014-03-10 Hui Zhu <hui@codesourcery.com>
* target.h (target_insert_breakpoint): Remove "hardware" from its
comments.
Alan Modra [Sun, 9 Mar 2014 23:00:41 +0000 (09:30 +1030)]
daily update
Alan Modra [Sat, 8 Mar 2014 23:01:12 +0000 (09:31 +1030)]
daily update
Alan Modra [Sat, 8 Mar 2014 02:35:06 +0000 (13:05 +1030)]
Better overflow checking for powerpc32 relocations
Similar to the powerpc64 patch, this improves overflow checking in
elf32-ppc.c. Many reloc "howto" entries needed fixes, some just
cosmetic.
The patch also fixes the R_PPC_VLE_SDA21 reloc application code, which
was horribly broken. In fact, it may still be broken since Power ISA
2.07 says e_li behaves as
RT <- EXTS(li20 1:4 || li20 5:8 || li20 0 || li20 9:19)
where li20 is a field taken from bits 17..20, 11..15, 21..31 of the
instruction. Freescale VLEPEM says differently, and I assume
correctly, that
RT <- EXTS(li20 0:3 || li20 4:8 || li20 9:19)
The VLE_SDA21 relocation description matches this too.
Now the VLE_SDA21 relocation specifies in the case where e_addi16 is
converted to e_li for symbols in .PPC.EMB.sdata0 or .PPC.EMB.sbss0
(no base register), that the field is restricted to 16 bits, with the
sign bit being propagated to the top 4 bits. I don't see the sense in
restricting the value like this, so have allowed the full 20 bit
signed value. This of course is compatible with the reloc description
in that values in the 16 bit signed range will result in exactly the
same insn field as when the reloc description is followed to the
letter.
* elf32-ppc.c (ppc_elf_howto_raw): Correct overflow check for
many relocations. Correct bitsize and rightshift too for a number
of VLE relocs. Describe R_PPC_VLE_SDA21 and R_PPC_VLE_SDA21_LO.
Correct dst_mask on R_PPC_VLE_SDA21_LO.
(ppc_elf_vle_split16): Tidy, delete unnecessary prototype.
(ppc_elf_relocate_section): Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value. Tidy vle split16 code.
Correct R_PPC_VLE_SDA21 and R_PPC_VLE_SDA21_LO handling.
Alan Modra [Thu, 6 Mar 2014 23:44:30 +0000 (10:14 +1030)]
Better overflow checking for powerpc64 relocations
R_PPC64_ADDR16 is used in three contexts:
- .short data relocation
- 16-bit signed insn fields, eg. addi
- 16-bit unsigned insn fields, eg. ori
In the first case we want to allow both signed and unsigned 16-bit
values, the latter two ought to error if the field exceeds the range
of values allowed for 16-bit signed and unsigned integers
respectively. These conflicting requirements meant that ld had to
choose the least restrictive overflow checks, and thus it is possible
to construct testcases where an addi field overflows but is not
reported by ld. Many relocations dealing with 16-bit insn fields have
this problem. What's more, some relocations that are only ever used
for signed fields of instructions woodenly copied the lax overflow
checking of R_PPC64_ADDR16.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Use complain_overflow_signed
for R_PPC64_ADDR14, R_PPC64_ADDR14_BRTAKEN, R_PPC64_ADDR14_BRNTAKEN,
R_PPC64_SECTOFF, R_PPC64_ADDR16_DS, R_PPC64_SECTOFF_DS,
R_PPC64_REL16 entries. Use complain_overflow_dont for R_PPC64_TOC.
(ppc64_elf_relocate_section): Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
gold/
* powerpc.cc (Powerpc_relocate_functions::Overflow_check): Add
CHECK_UNSIGNED, CHECK_LOW_INSN, CHECK_HIGH_INSN.
(Powerpc_relocate_functions::has_overflow_unsigned): New function.
(Powerpc_relocate_functions::has_overflow_bitfield,
overflowed): Use the above.
(Target_powerpc::Relocate::relocate): Correct overflow checking
for a number of relocations. Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
Doug Evans [Sat, 8 Mar 2014 01:33:12 +0000 (17:33 -0800)]
* dwarf2read.c (read_str_index): Rename local dwo_name to objf_name.
Doug Evans [Sat, 8 Mar 2014 00:38:26 +0000 (16:38 -0800)]
read_cutu_die_from_dwo: Misc minor cleanups.
* dwarf2read.c (read_cutu_die_from_dwo): Fix function comment.
Remove unused local comp_dir_attr. Assert exactly one of
stub_comp_unit_die, stub_comp_dir is non-NULL.
Joel Brobecker [Fri, 7 Mar 2014 17:00:27 +0000 (09:00 -0800)]
target.h: Expands complete_target_initialization and add_target comments.
Expand a bit the comments to answer some questions I had when looking
at why a target of mine would not have some default methods set.
gdb/ChangeLog:
* target.h (complete_target_initialization, add_target):
Add comment.
Alan Modra [Fri, 7 Mar 2014 23:00:39 +0000 (09:30 +1030)]
daily update
Pedro Alves [Fri, 7 Mar 2014 15:36:50 +0000 (15:36 +0000)]
Make the go32-nat.c target inherit inf-child.c.
So that all native targets inherit a single "superclass".
Target methods that are set to or do the same as inf-child.c's are
removed.
Tested by cross building on Fedora 17.
gdb/
2014-03-07 Pedro Alves <palves@redhat.com>
* go32-nat.c: Include inf-child.h.
(go32_ops): Delete global.
(go32_close, go32_detach, go32_prepare_to_store, go32_can_run):
Delete methods.
(go32_create_inferior): Push the passed in target pointer instead
of referencing go32_ops.
(init_go32_ops): Delete function. Moved parts to _initialize_go32_nat.
(go32_target): New function, based on init_go32_ops, but inherit
inf_child_target.
(_initialize_go32_nat): Use go32_target. Move parts of
init_go32_ops here.
Pedro Alves [Fri, 7 Mar 2014 12:11:40 +0000 (12:11 +0000)]
AIX 32-bit core loading, high section addresses.
I noticed GDB was failing to enable threading support for 32-bit AIX
cores. I traced it to failure to read variables from libpthreads.a.
The issue is that data for that library is loaded at a high address,
and bfd is sign extending the section addresses:
(gdb) info files
Symbols from "/home/palves/crash".
Local core dump file:
`/home/palves/core', file type aixcoff-rs6000.
0x2ff22000 - 0x2ff23000 is .stack
0x20000000 - 0x200316e0 is .data
0x20000e90 - 0x200016c0 is .data
0xfffffffff0254000 - 0xfffffffff0297920 is .data
0xfffffffff07b46a8 - 0xfffffffff07b47c8 is .data
0xfffffffff0298000 - 0xfffffffff029bfcc is .data
0xfffffffff06dafe0 - 0xfffffffff07b3838 is .data
Local exec file:
`/home/palves/crash', file type aixcoff-rs6000.
Entry point: 0x20001394
0x10000150 - 0x10000e90 is .text
0x20000e90 - 0x2000149c is .data
0x2000149c - 0x200016c0 is .bss
0xd053b124 - 0xd053e15f is .text in /usr/lib/libpthreads.a(shr_comm.o)
0xf0254000 - 0xf0297920 is .data in /usr/lib/libpthreads.a(shr_comm.o)
0xf0254450 - 0xf0297920 is .bss in /usr/lib/libpthreads.a(shr_comm.o)
0xd053a280 - 0xd053aabe is .text in /usr/lib/libcrypt.a(shr.o)
0xf07b46a8 - 0xf07b47c8 is .data in /usr/lib/libcrypt.a(shr.o)
0xf07b47c8 - 0xf07b47c8 is .bss in /usr/lib/libcrypt.a(shr.o)
0xd04fb180 - 0xd053917e is .text in /usr/lib/libpthreads.a(shr_xpg5.o)
0xf0298000 - 0xf029bfcc is .data in /usr/lib/libpthreads.a(shr_xpg5.o)
0xf029bf64 - 0xf029bfcc is .bss in /usr/lib/libpthreads.a(shr_xpg5.o)
0xd0100900 - 0xd04fa39c is .text in /usr/lib/libc.a(shr.o)
0xf06dafe0 - 0xf07b3838 is .data in /usr/lib/libc.a(shr.o)
0xf0751e94 - 0xf07b3838 is .bss in /usr/lib/libc.a(shr.o)
Notice:
...
0xfffffffff0298000 - 0xfffffffff029bfcc is .data
...
Those are the bfd section start/end addresses. It't not visible here:
...
0xf0298000 - 0xf029bfcc is .data in /usr/lib/libpthreads.a(shr_xpg5.o)
...
... just because GDB trims that number to 32-bit when printing.
GDB then fails to find the memory for libpthreads.a variables in the
core, and falls back to reading it directly from the executable (which
yields the values as originally initialized in the code).
E.g.:
(gdb) p &__n_pthreads
$2 = (<data variable, no debug info> *) 0xf074fda8 <__n_pthreads>
(gdb) p __n_pthreads
$1 = -1
That should have returned 2 instead of -1.
bfd/
2014-03-07 Pedro Alves <palves@redhat.com>
* rs6000-core.c (rs6000coff_core_p): Cast pointers to bfd_vma
through ptr_to_uint instead of through long.
Markus Metzger [Wed, 5 Mar 2014 10:17:35 +0000 (11:17 +0100)]
btrace, test: fix gdb.btrace/data test
The format of the output changed. Fix the test.
testsuite/
* gdb.btrace/data.exp: Update expected output.
Alan Modra [Thu, 6 Mar 2014 23:00:46 +0000 (09:30 +1030)]
daily update
Roland McGrath [Thu, 6 Mar 2014 17:46:15 +0000 (09:46 -0800)]
Apply ld-arm/gc-hidden-1 to all ELF targets, not just *eabi* targets
ld/testsuite/
* ld-arm/gc-hidden-1.d: Remove target, add not-target to match
other ELF-only tests in this directory. Loosen regexps so they
don't care what the exact addresses are.
Roland McGrath [Thu, 6 Mar 2014 17:44:25 +0000 (09:44 -0800)]
Disable --long-plt test for arm-nacl targets.
ld/testsuite/
* ld-arm/arm-elf.exp (armelftests_common): Move long-plt case ...
(armelftests_nonacl): ... here.
Joel Brobecker [Thu, 6 Mar 2014 15:57:29 +0000 (10:57 -0500)]
Fix sol-thread.c build failure.
Some updates where needed after the minimal symbol handling got changed
a little. This patch makes those changes.
gdb/ChangeLog:
* sol-thread.c: #include "symtab.h", "minsym.h" and "objfiles.h".
(ps_pglobal_lookup): Use BMSYMBOL_VALUE_ADDRESS instead of
SYMBOL_VALUE_ADDRESS.
(info_cb): MSYMBOL_PRINT_NAME instead of SYMBOL_PRINT_NAME.
Denis Chertykov [Thu, 6 Mar 2014 14:59:05 +0000 (18:59 +0400)]
* gas/tc-avr.c: Add new devices
avr25: ata5272, attiny828
avr35: ata5505, attiny1634
avr4: atmega8a, ata6285, ata6286, atmega48pa
avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
atmega16hva2
avr51: atmega128a, atmega1284
avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
atxmega32e5, atxmega16e5, atxmega8e5
avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
atxmega64c3, atxmega64d4
avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
atxmega256c3, atxmega384c3, atxmega384d3
avrxmega7: atxmega128a4u
* doc/c-avr.texi: Ditto.
Nick Clifton [Thu, 6 Mar 2014 10:57:13 +0000 (10:57 +0000)]
Patch for PR binutils/16664 which triggers a seg-fault when attempting to
display the contents of a corrupt attribute section.
* readelf.c (process_attributes): Add checks for corrupt
attribute section names.
* elf-attrs.c (_bfd_elf_parse_attributes): Add checks for corrupt
attribute section names.
Yao Qi [Sat, 22 Feb 2014 05:53:37 +0000 (13:53 +0800)]
Remove argument optional_p from get_tracepoint_by_number
This patch is to remove parameter optional_p as it is always true,
in order to simplify get_tracepoint_by_number.
'optional_p' was added by this change,
1999-11-18 Tom Tromey <tromey@cygnus.com>
* tracepoint.h (get_tracepoint_by_number): Updated
declaration.
* tracepoint.c (trace_pass_command): Better error message.
Fixed logic when `all' not specified.
(get_tracepoint_by_number): Added `optional_p' argument. Fixed
all callers.
but after this patch,
FYI: remove `static's from cli-utils.c
https://sourceware.org/ml/gdb-patches/2011-03/msg00636.html
'optional_p' passed to get_tracepoint_by_number become always true.
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
* breakpoint.c (get_tracepoint_by_number): Remove argument
optional_p. All callers updated. Adjust comments. Update
output message.
* breakpoint.h (get_tracepoint_by_number): Update declaration.
Yao Qi [Sat, 22 Feb 2014 06:42:12 +0000 (14:42 +0800)]
Handle parse number error in goto_bookmark_command
In GDB mainline, the error message for goto-bookmark
isn't perfect.
(gdb) goto-bookmark 1.1
goto-bookmark: no bookmark found for ''.
This patch tweaks the error message by checking the return value of
get_number. With patch applied, it becomes:
(gdb) goto-bookmark 1.1
goto-bookmark: invalid bookmark number '1.1'.
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
* reverse.c (goto_bookmark_command): Add local 'p'. Emit error
early if get_number returns zero. Use 'p' instead of 'args'.
Yao Qi [Thu, 20 Feb 2014 09:35:31 +0000 (17:35 +0800)]
Add a newline in output messages
Hi,
GDB prints two warnings in one single line, as below:
(gdb) p 1.2
$1 = 1.2
(gdb) enable $1.2
History value must have integer type.Bad breakpoint number '$1'
This patch adds '\n' at the end of message.
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
* cli/cli-utils.c (get_number_trailer): Add '\n' at the end of
message.
Yao Qi [Sat, 15 Feb 2014 00:48:53 +0000 (08:48 +0800)]
Fix PR16508
This patch fixes PR16508, which is about MI "-trace-find frame-number 0"
behaves differently from CLI "tfind 0". In CLI, we check both
status->running and status->filename, but in MI, we only check
status->running, which looks wrong to me. This patch moves the code
of checking to a new function check_trace_running, and use it in
both CLI and MI.
This patch also adds a test case pr16508.exp, which fails without this
fix, and passes with the fix applied.
FAIL: gdb.trace/pr16508.exp: interpreter-exec mi "-trace-find frame-number 0"
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
PR breakpoints/16508
* tracepoint.c (check_trace_running): New function.
(trace_find_command): Move code to check_trace_running and
call check_trace_running.
(trace_find_pc_command): Likewise.
(trace_find_tracepoint_command): Likewise.
(trace_find_line_command): Likewise.
(trace_find_range_command): Likewise.
* tracepoint.h (check_trace_running): Likewise.
* mi/mi-main.c (mi_cmd_trace_find): Call check_trace_running.
gdb/testsuite:
2014-03-06 Yao Qi <yao@codesourcery.com>
* gdb.trace/pr16508.exp: New file.
Yao Qi [Tue, 4 Mar 2014 09:39:10 +0000 (17:39 +0800)]
Change the default implementation of to_traceframe_info to tcomplain
This patch is to change the default implementation of to_traceframe_info
from 'return NULL' to tcomplain, which is intended. If new target
supports tracepoint, this method should be implemented, otherwise,
an error is thrown.
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
* target.h (struct target_ops) <to_traceframe_info>: Use
TARGET_DEFAULT_NORETURN (tcomplain ()).
* target-delegates.c: Regenerated.
Alan Modra [Wed, 5 Mar 2014 23:01:23 +0000 (09:31 +1030)]
daily update
Pedro Alves [Wed, 5 Mar 2014 14:18:28 +0000 (14:18 +0000)]
PR gdb/16575: stale breakpoint instructions in the code cache
In non-stop mode, or rather, breakpoints always-inserted mode, the
code cache can easily end up with stale breakpoint instructions:
All it takes is filling a cache line when breakpoints already exist in
that memory region, and then delete the breakpoint.
Vis. (from the new test):
(gdb) set breakpoint always-inserted on
(gdb) b 23
Breakpoint 2 at 0x400540: file ../../../src/gdb/testsuite/gdb.base/breakpoint-shadow.c, line 23.
(gdb) b 24
Breakpoint 3 at 0x400547: file ../../../src/gdb/testsuite/gdb.base/breakpoint-shadow.c, line 24.
disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: movl $0x1,-0x4(%rbp)
0x0000000000400547 <+11>: movl $0x2,-0x4(%rbp)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
So far so good. Now flush the code cache:
(gdb) set code-cache off
(gdb) set code-cache on
Requesting a disassembly works as expected, breakpoint shadowing is
applied:
(gdb) disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: movl $0x1,-0x4(%rbp)
0x0000000000400547 <+11>: movl $0x2,-0x4(%rbp)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
However, now delete the breakpoints:
(gdb) delete
Delete all breakpoints? (y or n) y
And disassembly shows the old breakpoint instructions:
(gdb) disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: int3
0x0000000000400541 <+5>: rex.RB cld
0x0000000000400543 <+7>: add %eax,(%rax)
0x0000000000400545 <+9>: add %al,(%rax)
0x0000000000400547 <+11>: int3
0x0000000000400548 <+12>: rex.RB cld
0x000000000040054a <+14>: add (%rax),%al
0x000000000040054c <+16>: add %al,(%rax)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
Those breakpoint instructions are no longer installed in target memory
they're stale in the code cache. Easily confirmed by just disabling
the code cache:
(gdb) set code-cache off
(gdb) disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: movl $0x1,-0x4(%rbp)
0x0000000000400547 <+11>: movl $0x2,-0x4(%rbp)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
I stumbled upon this when writing a patch to infrun.c, that made
handle_inferior_event & co fill in the cache before breakpoints were
removed from the target. Recall that wait_for_inferior flushes the
dcache for every event. So in that case, always-inserted mode was not
necessary to trigger this. It's just a convenient way to expose the
issue.
The dcache works at the raw memory level. We need to update it
whenever memory is written, no matter what kind of target memory
object was originally passed down by the caller. The issue is that
the dcache update code isn't reached when a caller explicitly writes
raw memory. Breakpoint insertion/removal is one such case --
mem-break.c uses target_write_read_memory/target_write_raw_memory.
The fix is to move the dcache update code from memory_xfer_partial_1
to raw_memory_xfer_partial so that it's always reachable.
When we do that, we can actually simplify a series of things.
memory_xfer_partial_1 no longer needs to handle writes for any kind of
memory object, and therefore dcache_xfer_memory no longer needs to
handle writes either. So the latter (dcache_xfer_memory) and its
callees can be simplified to only care about reads. While we're
touching dcache_xfer_memory's prototype, might as well rename it to
reflect that fact that it only handles reads, and make it follow the
new target_xfer_status/xfered_len style. This made me notice that
dcache_xfer_memory loses the real error status if a memory read fails:
we could have failed to read due to TARGET_XFER_E_UNAVAILABLE, for
instance, but we always return TARGET_XFER_E_IO, hence the FIXME note.
I felt that fixing that fell out of the scope of this patch.
Currently dcache_xfer_memory handles the case of a write failing. The
whole cache line is invalidated when that happens. However,
dcache_update, the sole mechanism for handling writes that will remain
after the patch, does not presently handle that scenario. That's a
bug. The patch makes it handle that, by passing down the
target_xfer_status status from the caller, so that it can better
decide what to do itself. While I was changing the function's
prototype, I constified the myaddr parameter, getting rid of the need
for the cast as seen in its existing caller.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2014-03-05 Pedro Alves <palves@redhat.com>
PR gdb/16575
* dcache.c (dcache_poke_byte): Constify ptr parameter. Return
void. Update comment.
(dcache_xfer_memory): Delete.
(dcache_read_memory_partial): New, based on the read bits of
dcache_xfer_memory.
(dcache_update): Add status parameter. Use ULONGEST for len, and
adjust. Discard cache lines if the reason for the update was
error.
* dcache.h (dcache_xfer_memory): Delete declaration.
(dcache_read_memory_partial): New declaration.
(dcache_update): Update prototype.
* target.c (raw_memory_xfer_partial): Update the dcache here.
(memory_xfer_partial_1): Don't handle dcache writes here.
gdb/testsuite/
2014-03-05 Pedro Alves <palves@redhat.com>
PR gdb/16575
* gdb.base/breakpoint-shadow.exp (compare_disassembly): New
procedure.
(top level): Adjust to use it. Add tests that exercise breakpoint
interaction with the code-cache.
Alan Modra [Wed, 5 Mar 2014 11:46:15 +0000 (22:16 +1030)]
Update copyright years
Alan Modra [Wed, 5 Mar 2014 09:27:39 +0000 (19:57 +1030)]
Support R_PPC64_ADDR64_LOCAL
This adds support for "func@localentry", an expression that returns the
ELFv2 local entry point address of function "func". I've excluded
dynamic relocation support because that obviously would require glibc
changes.
include/elf/
* ppc64.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_ADDR64_LOCAL entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_ADDR64_LOCAL.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* Add BFD_RELOC_PPC64_ADDR64_LOCAL.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
(md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
ld/testsuite/
* ld-powerpc/elfv2-2a.s, ld-powerpc/elfv2-2b.s: New files.
* ld-powerpc/elfv2-2exe.d, ld-powerpc/elfv2-2so.d: New files.
* ld-powerpc/powerpc.exp: Run new test.
elfcpp/
* powerpc.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::local, global): Support
R_PPC64_ADDR64_LOCAL.
(Target_powerpc::Relocate::relocate): Likewise.
Alan Modra [Wed, 5 Mar 2014 09:01:45 +0000 (19:31 +1030)]
Support more relocs on 16-bit insn fields
This patch allows gas to assemble a testcase like
li 3,ext_sym
which oddly was not accepted while the following is OK:
li 3,ext_sym@l
* config/tc-ppc.c (md_assemble): Move code adjusting reloc types
later. Merge absolute and relative branch reloc selection.
Generate 16-bit relocs for most 16-bit insn fields given a
non-constant expression.
Alan Modra [Wed, 5 Mar 2014 08:57:57 +0000 (19:27 +1030)]
Remove magic treatment of toc symbols for powerpc ELF
The XCOFF assembler does some wierd things with instructions like
`lwz 9,sym(30'. See the comment in md_apply_fix. From an ELF
perspective, it's weird even to magically select a TOC16 reloc
when a symbol is in the TOC/GOT. ELF assemblers generally use
modifiers like @toc to select relocs, so remove this "feature"
for ELF. I believe this was to support gcc -m32 -mcall-aixdesc
but that combination of gcc options has been broken for a long
time.
* config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
(md_assemble): Don't call ppc_is_toc_sym for ELF.
Mike Frysinger [Thu, 20 Feb 2014 05:13:48 +0000 (00:13 -0500)]
sim: constify prog_name
There's no need for the prog_name handed down to the core to be mutable,
so add const markings to it and all the related funcs.
Alan Modra [Tue, 4 Mar 2014 23:01:07 +0000 (09:31 +1030)]
daily update
Richard Sandiford [Tue, 4 Mar 2014 21:30:39 +0000 (21:30 +0000)]
Fix changelog formatting in last commit -- sorry
Richard Sandiford [Tue, 4 Mar 2014 21:18:02 +0000 (21:18 +0000)]
bfd/
2014-02-04 Heiher <r@hev.cc>
* elfxx-mips.c (mips_set_isa_flags): Use E_MIPS_ARCH_64R2 for
Loongson-3A.
(mips_mach_extensions): Make bfd_mach_mips_loongson_3a an
extension of bfd_mach_mipsisa64r2.
opcodes/
2014-02-04 Heiher <r@hev.cc>
* mips-dis.c (mips_arch_choices): Usee ISA_MIPS64R2 for Loongson-3A.
gas/
2014-02-04 Heiher <r@hev.cc>
* config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
Loongson-3A.
Richard Sandiford [Tue, 4 Mar 2014 21:16:38 +0000 (21:16 +0000)]
opcodes/
* mips-opc.c (mips_builtin_opcodes): Move the udi* instructions
so that they come after the Loongson extensions.
Nick Clifton [Tue, 4 Mar 2014 17:22:46 +0000 (17:22 +0000)]
Remove default-manifest from ALL_EMUL_EXTRA_BINARIES so that it is not mistakenly
built when constructing a toolchain configued from all targets.
* Makefile.am (ALL_EMUL_EXTRA_BINARIES): Remove default-manifest.
* Makefile.in: Regenerate.
Nick Clifton [Tue, 4 Mar 2014 15:25:53 +0000 (15:25 +0000)]
Install patch for PR ld/16017. This adds support for generating PLT entries
using Thumb2 instructions for those cores which do not support the ARM ISA.
* elf32-arm.c (elf32_thumb2_plt0_entry): New array.
(elf32_thumb2_plt_entry): New array.
(elf32_arm_create_dynamic_sections): Set PLT entry sizes when
using thumb2 based PLT.
(elf32_arm_populate_plt_entry): Handle generating Thumb2 based PLT
entries.
(elf32_arm_final_link_relocate): Do not bias jumps to Thumb based
PLT entries.
(elf32_arm_finish_dynamic_sections): Handle creation of Thumb2
based PLT 0-entry.
(elf32_arm_output_plt_map_1): Handle creation of local symbols for
Thumb2 based PLT 0-entry.
(elf32_arm_output_arch_local_syms): Handle creation of local
symbols for Thumb2 based PLT entries.
Mike Frysinger [Thu, 20 Feb 2014 03:29:37 +0000 (22:29 -0500)]
sim: convert old style prototypes
Most of these prototypes have been killed off, but we have a few left
in the sim tree. Clean them up so we can enable the -W flag for it.
Alan Modra [Mon, 3 Mar 2014 23:00:37 +0000 (09:30 +1030)]
daily update
Tom Tromey [Tue, 3 Dec 2013 17:21:20 +0000 (10:21 -0700)]
move probes to be per-bfd
This patch moves the probe data from the objfile to the per-BFD
object. This lets the probes be shared between different inferiors
(and different objfiles when dlmopen is in use, should gdb ever handle
that).
2014-03-03 Tom Tromey <tromey@redhat.com>
* elfread.c (probe_key): Change to bfd_data.
(elf_get_probes, probe_key_free, _initialize_elfread): Probes are
now per-BFD, not per-objfile.
* stap-probe.c (stap_probe_destroy): Update comment.
(handle_stap_probe): Allocate on the per-BFD obstack.
Tom Tromey [Mon, 2 Dec 2013 20:58:59 +0000 (13:58 -0700)]
change probes to be program-space-independent
This changes the probes to be independent of the program space.
After this, when a probe's address is needed, it is determined by
applying offsets at the point of use.
This introduces a bound_probe object, similar to bound minimal
symbols. Objects of this type are used when it's necessary to pass a
probe and its corresponding objfile.
This removes the backlink from probe to objfile, which was primarily
used to fetch the architecture to use.
This adds a get_probe_address function which calls a probe method to
compute the probe's relocated address. Similarly, it adds an objfile
parameter to the semaphore methods so they can do the relocation
properly as well.
2014-03-03 Tom Tromey <tromey@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use bound probes.
* breakpoint.c (create_longjmp_master_breakpoint): Use
get_probe_address.
(add_location_to_breakpoint, bkpt_probe_insert_location)
(bkpt_probe_remove_location): Update.
* breakpoint.h (struct bp_location) <probe>: Now a bound_probe.
* elfread.c (elf_symfile_relocate_probe): Remove.
(elf_probe_fns): Update.
(insert_exception_resume_breakpoint): Change type of "probe"
parameter to bound_probe.
(check_exception_resume): Update.
* objfiles.c (objfile_relocate1): Don't relocate probes.
* probe.c (bound_probe_s): New typedef.
(parse_probes): Use get_probe_address. Set sal's objfile.
(find_probe_by_pc): Return a bound_probe.
(collect_probes): Return a VEC(bound_probe_s).
(compare_probes): Update.
(gen_ui_out_table_header_info): Change type of "probes"
parameter. Update.
(info_probes_for_ops): Update.
(get_probe_address): New function.
(probe_safe_evaluate_at_pc): Update.
* probe.h (struct probe_ops) <get_probe_address>: New field.
<set_semaphore, clear_semaphore>: Add objfile parameter.
(struct probe) <objfile>: Remove field.
<arch>: New field.
<address>: Update comment.
(struct bound_probe): New.
(find_probe_by_pc): Return a bound_probe.
(get_probe_address): Declare.
* solib-svr4.c (struct probe_and_action) <address>: New field.
(hash_probe_and_action, equal_probe_and_action): Update.
(register_solib_event_probe): Add address parameter.
(solib_event_probe_at): Update.
(svr4_create_probe_breakpoints): Add objfile parameter. Use
get_probe_address.
* stap-probe.c (struct stap_probe) <sem_addr>: Update comment.
(stap_get_probe_address): New function.
(stap_can_evaluate_probe_arguments, compute_probe_arg)
(compile_probe_arg): Update.
(stap_set_semaphore, stap_clear_semaphore): Compute semaphore's
address.
(handle_stap_probe): Don't relocate the probe.
(stap_relocate): Remove.
(stap_gen_info_probes_table_values): Update.
(stap_probe_ops): Remove stap_relocate.
* symfile-debug.c (debug_sym_relocate_probe): Remove.
(debug_sym_probe_fns): Update.
* symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove.
* symtab.c (init_sal): Use memset.
* symtab.h (struct symtab_and_line) <objfile>: New field.
* tracepoint.c (start_tracing, stop_tracing): Update.
Tom Tromey [Mon, 2 Dec 2013 18:12:15 +0000 (11:12 -0700)]
comment fixes
This fixes up a few mildly erroneous comments in probe.h.
2014-03-03 Tom Tromey <tromey@redhat.com>
* probe.h (parse_probes, find_probe_by_pc)
(find_probes_in_objfile): Fix comments.
Nick Clifton [Mon, 3 Mar 2014 17:27:55 +0000 (17:27 +0000)]
This patch enhances the MSP430 port of GAS so that, if requested, it will
generate warning messages about an instruction that changes the interrupt
state not being followed by a NOP instruction.
* config/msp430/msp430.c: Replace known mcu array with known
msp430 ISA mcu name array.
Accept any name for -mmcu option.
Add -mz option to warn about missing NOP following an interrupt
status change.
(check_for_nop): New.
(msp430_operands): Emit a warning, if requested, when an interrupt
changing instruction is not followed by a NOP.
* doc/c-msp430.c: Document -mz option.
* gas/msp430/bad.d: Add -mz option.
* gas/msp430/bad.s: Add more cases where warnings should be
generated.
* gas/msp430/bad.l: Add expected warning messages.
Alan Modra [Mon, 3 Mar 2014 03:11:34 +0000 (13:41 +1030)]
More copyright fixes
* config/obj-fdpicelf.c: Correct copyright date.
* config/obj-fdpicelf.h: Likewise.
Alan Modra [Sat, 1 Mar 2014 11:25:26 +0000 (21:55 +1030)]
Fix various copyright issues
binutils/
* README: Add "Copyright Notices" paragraph.
gas/
* config/bfin-lex-wrapper.c: Correct copyright date.
* config/tc-frv.c: Correct copyright punctuation.
* config/tc-ip2k.c: Likewise.
* config/tc-iq2000.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic4x.h: Likewise.
ld/testsuite/
* ld-scripts/phdrs2.exp: Correct copyright punctuation.
* ld-v850/v850.exp: Correct copyright typo.
opcodes/
* i386-gen.c (process_copyright): Emit copyright notice on one line.
gold/
* dwp.cc (print_version): Update copyright year to current.
Alan Modra [Sun, 2 Mar 2014 23:00:42 +0000 (09:30 +1030)]
daily update
Doug Evans [Sun, 2 Mar 2014 21:51:35 +0000 (16:51 -0500)]
* infrun.c (handle_signal_stop): Replace test for
TARGET_WAITKIND_STOPPED with an assert.
Doug Evans [Sun, 2 Mar 2014 18:30:46 +0000 (10:30 -0800)]
guile/scm-objfile.c (ofscm_mark_objfile_smob): Fix typo in comment.
Doug Evans [Sun, 2 Mar 2014 17:17:46 +0000 (09:17 -0800)]
guile/lib/gdb/printing.scm (append-pretty-printer!): Fix thinko.
Alan Modra [Sat, 1 Mar 2014 23:00:37 +0000 (09:30 +1030)]
daily update
Mark Kettenis [Sat, 1 Mar 2014 16:13:47 +0000 (17:13 +0100)]
Silence ARI warning.
gdb/ChangeLog:
* obsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
Mark Kettenis [Sat, 1 Mar 2014 14:29:34 +0000 (15:29 +0100)]
Enable rhreads support on OpenBSD/i386.
gdb/ChangeLog:
* i386obsd-nat.c: Include "obsd-nat.h".
(_initialize_i386obsd_nat): Call obsd_add_target instead of
add_target.
* config/i386/obsd.mh (NATDEPFILES): Add obsd-nat.o.
Mark Kettenis [Sat, 1 Mar 2014 12:06:49 +0000 (13:06 +0100)]
Eliminate pointer signedness warning.
gdb/ChangeLog:
* i386obsd-nat.c (i386obsd_supply_pcb): Cast 'sf' to 'gdb_byte *'.
Yuri Gribov [Sat, 1 Mar 2014 11:19:53 +0000 (12:19 +0100)]
ld-arm/long-plt-format.d, ld-arm/arm-elf.exp: Adjust for arm-eabi.
Mark Kettenis [Sat, 1 Mar 2014 11:03:30 +0000 (12:03 +0100)]
Fix ChangeLog.
Mark Kettenis [Sat, 1 Mar 2014 11:00:19 +0000 (12:00 +0100)]
Enable rthreads support on OpenBSD/mips64.
gdb/ChangeLog:
* mips64obsd-nat.c: Include "obsd-nath".
(_initialize_mips64obsd_nat): Call obsd_add_target instead of
add_target
* config/mips/obsd64.mh (NATDEPFILES): Add obsd-nat.o.
Mark Kettenis [Sat, 1 Mar 2014 10:49:58 +0000 (11:49 +0100)]
Enable rthreads support on OpenBSD/amd64.
gdb/ChangeLog:
* amd64obsd-nat.c (_initialize_amd64obsd_nat): Call
obsd_add_target instead of add_target.
* config/i386/obsd64.mh (NATDEPFILES): Add obsd-nat.o.
Denis Chertykov [Sat, 1 Mar 2014 09:12:49 +0000 (13:12 +0400)]
* config/tc-avr.c: Remove atxmega16x1.
Siva Chandra [Thu, 27 Feb 2014 13:51:46 +0000 (05:51 -0800)]
Remove the unnecesary argument METHOD to valops.c:find_oload_champ.
* valops.c (find_oload_champ): Remove unneccesary argument METHOD.
(find_overload_match): Update call to find_oload_champ.
(find_oload_champ_namespace_loop): Likewise
Alan Modra [Fri, 28 Feb 2014 23:01:08 +0000 (09:31 +1030)]
daily update
Mark Kettenis [Fri, 28 Feb 2014 22:20:57 +0000 (23:20 +0100)]
Add sparc64obsd-nat.c to ALLDEPFILES.
gdb/ChangeLog:
* Makefile.in (ALLDEPFILES): Add sparc64obsd-nat.c.
Mark Kettenis [Fri, 28 Feb 2014 22:06:14 +0000 (23:06 +0100)]
Enable rthreads supports on OpenBSD/sparc64.
gdb/ChangeLog:
* configure.host (sparc64-*-openbsd*): Set gdb_host to obsd64.
* config/sparc/obsd64.mh: New file.
* sparc64obsd-nat.c: New file.
Mark Kettenis [Fri, 28 Feb 2014 21:58:57 +0000 (22:58 +0100)]
Stupid git never fucking does what I want!
Mark Kettenis [Thu, 27 Feb 2014 22:23:46 +0000 (23:23 +0100)]
Support rthreads on OpenBSD 5.2 and later.
OpenBSD 5.2 and later have a proper threads implementation based on
kernel threads. Debugging support is provided through additional
ptrace(2) requests, so this diff extends the generic code in
inf-ptrace.c with OpenBSD-specific code to discover additional threads.
gdb/ChangeLog:
* obsd-nat.h: New file.
* obsd-nat.c: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add obsd-nat.h.
(ALLDEPFILES): Add obsd-nat.c.
Tom Tromey [Tue, 24 Dec 2013 03:53:23 +0000 (20:53 -0700)]
constify ui_out_impl
This patch constifies ui_out_impl in struct ui_out, and various
instances of ui_out_impl.
This removes a couple of FIXME comments (near cli_ui_out_impl and
mi_ui_out_impl) that did not make sense to me.
Tested by rebuilding.
2014-02-28 Tom Tromey <tromey@redhat.com>
* cli-out.c (cli_ui_out_impl): Now const. Remove comment.
* cli-out.h (cli_ui_out_impl): Now const.
* mi/mi-out.c (mi_ui_out_impl): Now const. Remove comment.
* ui-out.c (struct ui_out) <impl>: Now const.
(default_ui_out_impl): Now const.
(ui_out_new): Make 'impl' parameter const.
* ui-out.h (ui_out_new): Update.
Alan Modra [Fri, 28 Feb 2014 04:39:32 +0000 (15:09 +1030)]
Incorrect .debug_line prologue header length for 64-bit DWARF
Don't be clever, calculate the length directly as the difference of
two symbols.
* dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
field for 64-bit dwarf.
Alan Modra [Fri, 28 Feb 2014 04:08:27 +0000 (14:38 +1030)]
Fix check_relocs/gc_sweep_hook mismatch
PR ld/16643
* elflink.c (elf_gc_sweep): Call gc_sweep_hook for exactly
the same conditions we called check_relocs.
Alan Modra [Fri, 28 Feb 2014 04:02:26 +0000 (14:32 +1030)]
Regenerate opcodes/msp430-decode.c
Cosmetic changes.
* msp430-decode.c: Regenerate.
Alan Modra [Thu, 27 Feb 2014 23:01:17 +0000 (09:31 +1030)]
daily update
Mark Kettenis [Thu, 27 Feb 2014 20:51:08 +0000 (21:51 +0100)]
Prevent compiler warning.
GCC 4.2.1 complains about first_l_name may be used uninitialized, and my brain
agrees.
gdb/ChangeLog:
* solib-svr4.c (svr4_read_so_list): Initialize first_l_name to 0.
Mark Kettenis [Thu, 27 Feb 2014 20:22:29 +0000 (21:22 +0100)]
StackGhost cookie is per-process.
gdb/ChangeLog:
* sparc-nat.c (sparc_xfer_wcookie): Always use process ID.
Jan Kratochvil [Thu, 27 Feb 2014 20:16:04 +0000 (21:16 +0100)]
Additional PR 8882 fix.
runtest gdb.base/corefile.exp
==23174== ERROR: AddressSanitizer: heap-use-after-free on address 0x604400008c88 at pc 0x68f0be bp 0x7fffae9d7490 sp
0x7fffae9d7480
READ of size 8 at 0x604400008c88 thread T0
#0 0x68f0bd in svr4_read_so_list (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x68f0bd)
#1 0x68f64e in svr4_current_sos_direct (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x68f64e)
#2 0x68f757 in svr4_current_sos (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x68f757)
#3 0xcebbff in update_solib_list (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0xcebbff)
0x604400008c88 is located 8 bytes inside of 1104-byte region [0x604400008c80,0x6044000090d0)
freed by thread T0 here:
#0 0x7f52677500f9 (/lib64/libasan.so.0+0x160f9)
#1 0xd2c68a in xfree (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0xd2c68a)
#2 0xceb364 in free_so (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0xceb364)
#3 0xca59f8 in do_free_so (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0xca59f8)
#4 0x93432a in do_my_cleanups (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x93432a)
#5 0x934406 in do_cleanups (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x934406)
#6 0x68efa9 in svr4_read_so_list (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x68efa9)
I did not notice it during my review in:
Re: [PATCH v2] Skip vDSO when reading SO list (PR 8882)
https://sourceware.org/ml/gdb-patches/2013-09/msg00888.html
gdb/
2014-02-27 Jan Kratochvil <jan.kratochvil@redhat.com>
Additional PR 8882 fix.
* solib-svr4.c (svr4_read_so_list): Change first to first_l_name.
Message-ID: <
20140226220918.GA10431@host2.jankratochvil.net>
Yufeng Zhang [Thu, 27 Feb 2014 15:06:56 +0000 (15:06 +0000)]
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Replace IMM0 with
FPIMM0 for fcmeq, fcmgt, fcmge, fcmlt and fcmle.
gas/testsuite/
* gas/aarch64/fp-const0-parsing.s: New test.
* gas/aarch64/fp-const0-parsing.d: Likewise.
Yufeng Zhang [Thu, 27 Feb 2014 14:55:46 +0000 (14:55 +0000)]
opcodes/
* aarch64-opc.c (print_register_offset_address): Call
get_int_reg_name to prepare the register name.
gas/testsuite/
* gas/aarch64/ldst-reg-reg-offset.s: Add tests.
* gas/aarch64/ldst-reg-reg-offset.d: Update.
Pedro Alves [Thu, 27 Feb 2014 14:44:16 +0000 (14:44 +0000)]
Linux waitpid/__WALL emulation wrapper: If WNOHANG is set, don't touch sigprocmask.
Just a small optimization. No need to block/unblock signals if we're
not going to call sigsuspend.
gdb/
2014-02-27 Pedro Alves <palves@redhat.com>
* nat/linux-waitpid.c (my_waitpid): Only block signals if WNOHANG
isn't set.
Yuri Gribov [Thu, 27 Feb 2014 14:35:37 +0000 (14:35 +0000)]
This patch adds support for ARM PLT entries that support a full 32-bit offset range.
Enabled via the use of a new linker command line option: --long-plt.
* bfd-in.h: Add export of bfd_elf32_arm_use_long_plt.
* bfd-in2.h: Regenerate.
* elf32-arm.c (elf32_arm_plt_entry_long): New array.
(elf32_arm_link_hash_table_create): Set plt_entry_size to 16 if
using long PLT entries.
(bfd_elf32_arm_use_long_plt): New function.
(elf32_arm_populate_plt_entry): Add support for long PLT entries.
* emultempl/armelf.em (OPTION_LONG_PLT): Define.
(PARSE_AND_LIST_LONGOPTS): Add long-plt.
(PARSE_AND_LIST_OPTIONS): Likewise.
(PARSE_AND_LIST_ARGS_CASES): Handle long-plt.
* ld.texinfo: Document --long-plt.
* ld-arm/long-plt-format.s: New test case.
* ld-arm/long-plt-format.d: Expected disassembly.
* ld-arm/arm-elf.exp: Run the new test.
Pedro Alves [Thu, 27 Feb 2014 14:30:08 +0000 (14:30 +0000)]
Teach GDBserver's Linux backend about no unwaited-for children (TARGET_WAITKIND_NO_RESUMED).
GDBserver currently hangs forever in waitpid if the leader thread
exits before other threads, or if all resumed threads exit - e.g.,
next over a thread exit with sched-locking on. This is exposed by
leader-exit.exp. leader-exit.exp is part of a series of tests for a
set of related problems. See
<http://www.sourceware.org/ml/gdb-patches/2011-10/msg00704.html>:
"
To recap, on the Linux kernel, ptrace/waitpid don't allow reaping the
leader thread until all other threads in the group are reaped. When
the leader exits, it goes zombie, but waitpid will not return an exit
status until the other threads are gone. This is presently exercised
by the gdb.threads/leader-exit.exp test. The fix for that test, in
linux-nat.c:wait_lwp, handles the case where we see the leader gone
when we're stopping all threads to report an event to some other
thread to the core.
(...)
The latter bit about not blocking if there no resumed threads in the
process also applies to some other thread exiting, not just the main
thread. E.g., this test starts a thread, and runs to a breakpoint in
that thread:
...
(gdb) c
Continuing.
[New Thread 0x7ffff75a4700 (LWP 23397)]
[Switching to Thread 0x7ffff75a4700 (LWP 23397)]
Breakpoint 2, thread_a (arg=0x0) at ../../../src/gdb/testsuite/gdb.threads/no-unwaited-for-left.c:28
28 return 0; /* break-here */
(gdb) info threads
* 2 Thread 0x7ffff75a4700 (LWP 23397) thread_a (arg=0x0) at ../../../src/gdb/testsuite/gdb.threads/no-unwaited-for-left.c:28
1 Thread 0x7ffff7fcb720 (LWP 23391) 0x00007ffff7bc606d in pthread_join (threadid=
140737343276800, thread_return=0x0) at pthread_join.c:89
The thread will exit as soon as we resume it. But if we only resume
that thread, leaving the rest of the threads stopped:
(gdb) set scheduler-locking on
(gdb) c
Continuing.
^C^C^C^C^C^C^C^C
"
This patch fixes the issues by implementing TARGET_WAITKIND_NO_RESUMED
on GDBserver, similarly to what the patch above did for native
Linux GDB.
gdb.threads/leader-exit.exp now passes.
gdb.threads/no-unwaited-for-left.exp now at least errors out instead
of hanging:
continue
Continuing.
warning: Remote failure reply: E.No unwaited-for children left.
[Thread 15454] #1 stopped.
0x00000034cf408e60 in pthread_join (threadid=
140737353922368, thread_return=0x0) at pthread_join.c:93
93 lll_wait_tid (pd->tid);
(gdb) FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when the main thread exits
The gdb.threads/non-ldr-exc-*.exp tests are skipped because GDBserver
unfortunately doesn't support fork/exec yet, but I'm confident this
fixes the related issues.
I'm leaving modeling TARGET_WAITKIND_NO_RESUMED in the RSP for a
separate pass.
(BTW, in case of error in response to a vCont, it would be better for
GDB to query the target for the current thread, or re-select one,
instead of assuming current inferior_ptid is still the selected
thread.)
This implementation is a little different from GDB's, because I'm
avoiding bringing in more of this broken use of waitpid(PID) into
GDBserver. Specifically, this avoids waitpid(PID) when stopping all
threads. There's really no need for wait_for_sigstop to wait for each
LWP in turn. Instead, with some refactoring, we make it reuse
linux_wait_for_event.
gdb/gdbserver/
2014-02-27 Pedro Alves <palves@redhat.com>
PR 12702
* inferiors.h (A_I_NEXT, ALL_INFERIORS_TYPE, ALL_PROCESSES): New
macros.
* linux-low.c (delete_lwp, handle_extended_wait): Add debug
output.
(last_thread_of_process_p): Take a PID argument instead of a
thread pointer.
(linux_wait_for_lwp): Delete.
(num_lwps, check_zombie_leaders, not_stopped_callback): New
functions.
(linux_low_filter_event): New function, party factored out from
linux_wait_for_event.
(linux_wait_for_event): Rename to ...
(linux_wait_for_event_filtered): ... this. Add new filter ptid
argument. Partly rewrite. Always use waitpid(-1, WNOHANG) and
sigsuspend. Check for zombie leaders.
(linux_wait_for_event): Reimplement as wrapper around
linux_wait_for_event_filtered.
(linux_wait_1): Handle TARGET_WAITKIND_NO_RESUMED. Assume that if
a normal or signal exit is seen, it's the whole process exiting.
(wait_for_sigstop): No longer a for_each_inferior callback.
Rewrite on top of linux_wait_for_event_filtered.
(stop_all_lwps): Call wait_for_sigstop directly.
* server.c (resume, handle_target_event): Handle
TARGET_WAITKIND_NO_RESUMED.
Pedro Alves [Thu, 27 Feb 2014 14:30:08 +0000 (14:30 +0000)]
Move linux-nat.c:status_to_str to nat/linux-waitpid.c.
So that gdbserver's Linux backend can use it too.
gdb/
2014-02-27 Pedro Alves <palves@redhat.com>
PR 12702
* linux-nat.c (status_to_str): Moved to nat/linux-waitpid.c.
* nat/linux-waitpid.c: Include string.h.
(status_to_str): Moved here and made extern.
* nat/linux-waitpid.h (status_to_str): New declaration.
Hui Zhu [Thu, 27 Feb 2014 14:30:07 +0000 (14:30 +0000)]
Move ptid_match to common/ptid.c.
So that gdbserver can use it too.
gdb/
2014-02-27 Hui Zhu <hui@codesourcery.com>
PR 12702
* infrun.c (ptid_match): Move ...
* common/ptid.c (ptid_match): ... here.
* inferior.h (ptid_match): Move ...
* common/ptid.h (ptid_match): ... here.
Nick Clifton [Thu, 27 Feb 2014 14:09:29 +0000 (14:09 +0000)]
This patch adds a default manifest in to the final links performed by the Cygwin and MinGW targets.
The manifest is necessary in order for the linked binaries to be executed in a Windows 8 environment.
The manifest is added using a linker script so that this feature will be compiler-neutral. The resource
merging code in the linker means that if an application provides its own manifest then the default
manifest will be ignored.
* configure.in (all_emul_extra_binaries): New variable. Populated
by invoking configure.tgt.
(EMUL_EXTRA_BINARIES): New substitution.
* configure: Regenerate.
* configure.tgt (target_extra_binaries): New variable. Set to
default-manifest.o for Cygwin and MinGW targets.
* Makefile.am (EMUL_EXTRA_BINARIES): New variable. Initialised
by the configure script.
(ALL_EMUL_EXTRA_BINARIES): New variable.
(default-manifest.o): New rule to build the default manifest.
(ld_new_DEPENDENCIES): Add EMUL_EXTRA_BINARIES.
(install-data-local): Add EMUL_EXTRA_BINARIES.
* Makefile.in: Regenerate.
* ld.texinfo: Document default manifest support.
* emulparams/i386pe.sh (DEFAULT_MANIFEST): Define.
* emulparams/i386pep.sh (DEFAULT_MANIFEST): Define.
* emultempl/default-manifest.rc: New file.
* scripttempl/pe.sc (R_RSRC): Include DEFAULT_MANIFEST, if defined.
* scripttempl/pep.sc (R_RSRC): Likewise.
* ld-pe/longsecn-1.d: Allow for extra sections.
* ld-pe/longsecn-2.d: Likewise.
* ld-pe/longsecn.d: Likewise.
* ld-pe/secrel.d: Likewise.
Alan Modra [Thu, 27 Feb 2014 13:01:35 +0000 (23:31 +1030)]
Fix ELF ppc32 targets that don't use ppc32elf.em
5446cbdf82892a800ed7eef563a795e75223ec52 broke powerpc-lynxos,
powerpc-netware, powerpc-windiss and powerpc-vxworks.
bfd/
* elf32-ppc.c (ppc_elf_link_hash_table_create): Provide default
params for targets that don't use ppc32elf.em.
ld/
* emulparams/elf32ppcvxworks.sh: Source plt_unwind.sh and
use ppc32elf.em.
* emultempl/ppc32elf.em (ppc_after_open): Don't compile for
vxworks.
(LDEMUL_AFTER_OPEN): Don't set for vxworks.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Exclude
-secure-plt, -bss-plt and -sdata-got when vxworks.
Mark Kettenis [Thu, 27 Feb 2014 13:07:10 +0000 (14:07 +0100)]
Call common OpenBSD ABI init code on OpenBSD/mips64.
* mips64obsd-tdep.c (mips64obsd_init_abi): Call obsd_init_abi.
* configure.tgt (mips64*-*-openbsd*): Add obsd-tdep.c to
gdb_target_obs.
Mark Kettenis [Thu, 27 Feb 2014 12:47:00 +0000 (13:47 +0100)]
Add gdbarch auxv parsing for OpenBSD.
gdb/Changelog:
* obsd-tdep.c (obsd_auxv_parse): New function.
(obsd_init_abi): Set auxv_parse.
Mark Kettenis [Thu, 27 Feb 2014 12:40:15 +0000 (13:40 +0100)]
Add auxv parsing to the architecture vector.
Necessary to fix parsing auxv entries from core files on systems that use
the layout specified by ELF instead of the incompatible variant used by Linux.
gdb/Changelog:
* gdbarch.sh (auxv_parse): New.
* gdbarch.h: Regenerated.
* gdbarch.c: Regenerated.
* auxv.c (target_auxv_parse): Call gdbarch_parse_auxv if provided.
Alan Modra [Wed, 26 Feb 2014 23:01:09 +0000 (09:31 +1030)]
daily update
Ludovic Courtès [Tue, 18 Feb 2014 22:35:46 +0000 (23:35 +0100)]
guile: Add 'history-append!' procedure.
gdb/
2014-02-26 Ludovic Courtès <ludo@gnu.org>
* guile/scm-value.c (gdbscm_history_append_x): New function.
(value_functions): Add it.
gdb/testsuite/
2014-02-26 Ludovic Courtès <ludo@gnu.org>
* gdb.guile/scm-value.exp (test_value_in_inferior): Add
test for 'history-append!'.
gdb/doc/
2014-02-26 Ludovic Courtès <ludo@gnu.org>
* gdb/doc/guile.texi (Basic Guile): Document 'history-append!'.
Joel Brobecker [Mon, 24 Feb 2014 23:21:14 +0000 (15:21 -0800)]
gdbserver/Windows: Rely purely on event info when handling DLL load event
This is the GDBserver counterpart of a change we recently made in
GDB to only rely on get_image_name to determine its name.
This simplification, in turn, allows us to remove a fair amount of
functions and globals which now become unused.
gdb/gdbserver/ChangeLog:
* win32-low.c (psapi_get_dll_name,
* win32_CreateToolhelp32Snapshot): Delete.
(win32_CreateToolhelp32Snapshot, win32_Module32First)
(win32_Module32Next, load_toolhelp, toolhelp_get_dll_name):
Delete.
(handle_load_dll): Add function description.
Remove code using psapi_get_dll_name and toolhelp_get_dll_name.
Joel Brobecker [Mon, 24 Feb 2014 23:21:13 +0000 (15:21 -0800)]
windows: Factorize handling of DLL load address offset
This patch is a small cleanup that moves the magic 0x1000 offset
to apply to a DLL's base address inside the win32_add_one_solib
function, rather than delegate that reponsibility to its callers.
gdb/gdbserver/ChangeLog:
* win32-low.c (win32_add_one_solib): Add 0x1000 to load_addr.
Add comment.
(win32_add_all_dlls): Remove 0x1000 offset applied to DLL
base address when calling win32_add_one_solib.
(handle_load_dll): Delete local variable load_addr.
Remove 0x1000 offset applied to DLL base address when calling
win32_add_one_solib.
(handle_unload_dll): Add comment.
Joel Brobecker [Mon, 24 Feb 2014 23:21:12 +0000 (15:21 -0800)]
gdbserver/windows: Ignore DLL load/unload events during child initialization.
This GDBserver patch mirrors a change made in GDB wich aims at
simplifying DLL handling during the inferior initialization
(process creation during the "run", or during an "attach").
Instead of processing each DLL load event, which is sometimes
incomplete, we ignore these events until the inferior has completed
its startup phase, and then just iterate over all DLLs via
EnumProcessModules.
As a side-effect, it fixes a small bug where win32_ensure_ntdll_loaded
was missing a 0x1000 offset in the DLL base address. This problem
should only be visible on the 64bit version of Windows 8.1, since
this is the only platform where win32_ensure_ntdll_loaded is actually
needed.
gdb/gdbserver/ChangeLog:
* win32-low.c (win32_add_all_dlls): Renames
win32_ensure_ntdll_loaded. Rewrite function documentation.
Adjust implementation to always load all DLLs.
Add 0x1000 offset to DLL base address when calling
win32_add_one_solib.
(child_initialization_done): New static global.
(do_initial_child_stuff): Set child_initialization_done to
zero during child initialization, and 1 after. Replace call
to win32_ensure_ntdll_loaded by call to win32_add_all_dlls.
Add comment.
(match_dll_by_basename, dll_is_loaded_by_basename): Delete.
(handle_unload_dll): Add function documentation.
(get_child_debug_event): Ignore load and unload DLL events
during child initialization.
Joel Brobecker [Sat, 15 Feb 2014 15:09:58 +0000 (19:09 +0400)]
DWARF: Read constant-class addresses correctly
Starting with DWARF version 4, the description of the DW_AT_high_pc
attribute was amended to say:
if it is of class constant, the value is an unsigned integer offset
which when added to the low PC gives the address of the first
location past the last instruction associated with the entity.
A change was made in Apr 27th, 2012 to reflect that change:
| commit
91da14142c0171e58a91ad58a32fd010b700e761
| Author: Mark Wielaard <mjw@redhat.com>
| Date: Fri Apr 27 18:55:19 2012 +0000
|
| * dwarf2read.c (dwarf2_get_pc_bounds): Check DW_AT_high_pc form to
| see whether it is an address or a constant offset from DW_AT_low_pc.
| (dwarf2_record_block_ranges): Likewise.
| (read_partial_die): Likewise.
Unfortunately, this new interpretation is now used regardless of
the CU's DWARF version. It turns out that one of WindRiver's compilers
(FTR: Diabdata 4.4) is generating DWARF version 2 info with
DW_AT_high_pc attributes improperly using the data4 form. Because of
that, we miscompute all high PCs incorrectly. This leads to a lot of
symtabs having overlapping ranges, which in turn causes havoc in
pc-to-symtab-and-line translations.
One visible effect is when inserting a breakpoint on a given function:
(gdb) b world
Breakpoint 1 at 0x4005c4
The source location of the breakpoint is missing. The output should be:
(gdb) b world
Breakpoint 1 at 0x4005c8: file dw2-rel-hi-pc-world.c, line 24.
What happens in this case is that the pc-to-SAL translation first
starts be trying to find the symtab associated to our PC using
each symtab's ranges. Because of the high_pc miscomputation,
many symtabs end up matching, and the heuristic trying to select
the most probable one unfortunately returns one that is unrelated
(it really had no change in this case to do any better). Once we
have the wrong symtab, the start searching the associated linetable,
where the addresses are correct, thus finding no match, and therefore
no SAL.
This patch is an attempt at handling the situation as gracefully
as we can, without guarantees. It introduces a new function
"attr_value_as_address" which uses the correct accessor for getting
the value of a given attribute. It then adjust the code throughout
this unit to use this function instead of assuming that addresses always
have the DW_FORM_addr format.
It also fixes the original issue of miscomputing the high_pc
by limiting the new interpretation of constant form DW_AT_high_pc
attributes to units using DWARF version 4 or later.
gdb/ChangeLog:
* dwarf2read.c (attr_value_as_address): New function.
(dwarf2_find_base_address, read_call_site_scope): Use
attr_value_as_address in place of DW_ADDR.
(dwarf2_get_pc_bounds): Use attr_value_as_address to get
the low and high addresses. Slight rework of the handling
of the high pc being a constant form, and limit it to
DWARF verson 4 or higher.
(dwarf2_record_block_ranges): Likewise.
(read_partial_die): Likewise.
(new_symbol_full): Use attr_value_as_address in place of DW_ADDR.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
* gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
* gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc.exp: New file.
Tested on x86_64-linux.
Tom Tromey [Thu, 17 Oct 2013 18:03:06 +0000 (12:03 -0600)]
make "file" use the BFD cache better
Right now the "file" command will discard the exec_bfd and then
possibly open a new one.
If this ends up reopening the same file, it can cause needless work by
gdb -- destroying all the per-BFD data just to re-read it again.
This patch changes the code to hold a reference to the old exec_bfd
while opening the new one.
The possible downside of this is a higher peak memory use.
2014-02-26 Tom Tromey <tromey@redhat.com>
* exec.c (exec_file_attach): Hold a reference to exec_bfd.
This page took 0.049015 seconds and 4 git commands to generate.