Pedro Alves [Fri, 9 Apr 2010 14:40:48 +0000 (14:40 +0000)]
* tracepoint.c (cmd_qtstatus): Report trace buffer circularity.
Nick Clifton [Fri, 9 Apr 2010 14:40:18 +0000 (14:40 +0000)]
bfd/ChangeLog
2010-04-09 Nick Clifton <nickc@redhat.com>
* aoutx.h (aout_link_input_bfd): Remove unused variable sym_count.
* elf-eh-frame.c (_bfd_elf_eh_frame_section_offset): Remove unused
variables htab and hdr_info and mark info parameter as unused.
* elf.c (prep_headers): Remove unused variable i_phdrp.
(_bfd_elf_write_object_contents): Remove unused variable i_ehdrp.
* elf32-i386.c (elf_i386_relocate_section): Mark variabled warned
as unused.
* peXXigen.c (pe_print_reloc): Remove unused variable datasize.
* verilog.c (verilog_write_section): Remove unused variable
address.
binutils/ChangeLog
2010-04-09 Nick Clifton <nickc@redhat.com>
* dwarf.c (process_debug_info): Remove unused variable
cu_abbrev_offset_ptr.
(display_debug_lines_decoded): Remove unused variable prev_line.
* elfedit.c (process_archive): Remove unused variable
file_name_size.
* ieee.c (ieee_start_compilation_unit): Remove unused variable
nindx.
(ieee_set_type): Remove unused variables info, targetindx and
baseindx.
* objdump.c (disassmble_byte): Remove unused variable done_dot.
* rddbg.c (read_section_stabs_debugging_info): Remove unused
variable other.
* readelf.c (dump_section_as_strings): Remove unused variable
addr.
(process_archive): Remove unused variable file_name_size.
* stabs.c (parse_stab_string): Mark desc parameter as unused.
Remove unused variable lineno.
(parse_stab_struct_type): Remove unused variable orig.
(stab_demangle_type): Remove unused variables constp, volatilep
and hold.
gas/ChangeLog
2010-04-09 Nick Clifton <nickc@redhat.com>
* as.c (create_obj_attrs_section): Remove unused variable addr.
* listing.c (listing_listing): Remove unused variable message.
* read.c: Remove unnecessary register type qualifiers.
(s_mri): Only define/use old_flag variable if MRI_MODE_CHANGE is
defined.
ld/ChangeLog
2010-04-09 Nick Clifton <nickc@redhat.com>
* ldlang.c (wild_sort): Remove unused variable section_name.
opcodes/ChangeLog
2010-04-09 Nick Clifton <nickc@redhat.com>
* i386-dis.c (print_insn): Remove unused variable op.
(OP_sI): Remove unused variable mask.
Pedro Alves [Fri, 9 Apr 2010 13:56:08 +0000 (13:56 +0000)]
* breakpoint.c (condition_command): Pass condition expression to
set_breakpoint_condition stripped from breakpoint number.
Phil Muldoon [Fri, 9 Apr 2010 09:41:43 +0000 (09:41 +0000)]
2010-04-09 Phil Muldoon <pmuldoon@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Tom Tromey <tromey@redhat.com>
* breakpoint.c (condition_command): Simplify. Move condition
setting code to ...
(set_breakpoint_condition): ... here. New function.
* breakpoint.h (set_breakpoint_condition): Declare.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpoint.
(SUBDIR_PYTHON_SRCS): Likewise.
(py-breakpoint.o): New rule.
* python/py-breakpoint.c: New file.
* python/python-internal.h (gdbpy_breakpoints)
(gdbpy_initialize_breakpoints): Declare.
(GDB_PY_SET_HANDLE_EXCEPTION) Define.
2010-04-09 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: New File.
* gdb.python/py-breakpoint.C: Ditto.
2010-04-09 Phil Muldoon <pmuldoon@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Breakpoints In Python): New Node.
Eric B. Weddington [Fri, 9 Apr 2010 03:48:54 +0000 (03:48 +0000)]
2010-04-07 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add support for atmega16a, atmega168a,
atmega164a, atmega165a, atmega169a, atmega169pa, atmega16hva2,
atmega324a, atmega324pa, atmega325a, atmega3250a, atmega328,
atmega329a, atmega329pa, atmega3290a, atmega48a, atmega644a,
atmega645a, atmega645p, atmega6450a, atmega6450p, atmega649a,
atmega649p, atmega6490a, atmega6490p, atmega64hve, atmega88a,
atmega88pa, attiny461a, attiny84a, m3000.
Remove support for atmega8m1, atmega8c1, atmega16c1, atmega4hvd,
atmega8hvd, attiny327, m3000f, m3000s, m3001b.
* doc/c-avr.texi: Same.
Pedro Alves [Fri, 9 Apr 2010 03:40:00 +0000 (03:40 +0000)]
gdb/gdbserver/
* server.h (LONGEST): New.
(struct thread_info) <while_stepping>: New field.
(unpack_varlen_hex, xrealloc, pulongest, plongest, phex_nz):
Declare.
(initialize_tracepoint, handle_tracepoint_general_set)
(handle_tracepoint_query, tracepoint_finished_step)
(tracepoint_was_hit, release_while_stepping_state_list):
(current_traceframe): Declare.
* server.c (handle_general_set): Handle tracepoint packets.
(read_memory): New.
(write_memory): New.
(handle_search_memory_1): Use read_memory.
(handle_query): Report support for conditional tracepoints, trace
state variables, and tracepoint sources. Handle tracepoint
queries.
(main): Initialize the tracepoints module.
(process_serial_event): Handle traceframe reads/writes.
* linux-low.c (handle_tracepoints): New.
(linux_wait_1): Call it.
(linux_resume_one_lwp): Handle while-stepping.
(linux_supports_tracepoints, linux_read_pc, linux_write_pc): New.
(linux_target_ops): Install them.
* linux-low.h (struct linux_target_ops) <supports_tracepoints>:
New field.
* linux-x86-low.c (x86_supports_tracepoints): New.
(the_low_target). Install it.
* mem-break.h (delete_breakpoint): Declare.
* mem-break.c (delete_breakpoint): Make external.
* target.h (struct target_ops): Add `supports_tracepoints',
`read_pc', and `write_pc' fields.
(target_supports_tracepoints): Define.
* utils.c (xrealloc, decimal2str, pulongest, plongest, thirty_two)
(phex_nz): New.
* regcache.h (struct regcache) <registers_owned>: New field.
(init_register_cache, regcache_cpy): Declare.
(regcache_read_pc, regcache_write_pc): Declare.
(register_cache_size): Declare.
(supply_regblock): Declare.
* regcache.c (init_register_cache): New.
(new_register_cache): Use it.
(regcache_cpy): New.
(register_cache_size): New.
(supply_regblock): New.
(regcache_read_pc, regcache_write_pc): New.
* tracepoint.c: New.
* Makefile.in (OBS): Add tracepoint.o.
(tracepoint.o): New rule.
gdb/
* regformats/regdat.sh: Include server.h. Don't include
regcache.h.
Stan Shebs [Fri, 9 Apr 2010 03:00:58 +0000 (03:00 +0000)]
2010-04-08 Stan Shebs <stan@codesourcery.com>
Pedro Alves <pedro@codesourcery.com>
* tracepoint.h (struct trace_status): New fields disconnected_tracing
and circular_buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing.
* tracepoint.c (trace_status_command): Display target's status for
disconnected tracing and circular buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing, add
query for non-disconnected-tracing case, remove the stop_tracing
call.
(tfile_open): Clear disconnected and circular buffer status.
(trace_save): Save disconnected and circular buffer status.
(parse_trace_status): Parse disconnected and circular buffer status,
also recognize disconnected as a stop reason.
* remote.c (remote_set_disconnected_tracing): Only set
QTDisconnected if the remote end supports disconnected tracing.
Warn otherwise, if trying to enable disconnected tracing.
* infcmd.c (detach_command): Update disconnect_tracing call.
* cli/cli-cmds.c (quit_command): Ditto.
* gdb.texinfo (Tracepoint Packets): Describe disconn and circular
trace status fields.
Stan Shebs [Fri, 9 Apr 2010 00:49:59 +0000 (00:49 +0000)]
2010-04-08 Stan Shebs <stan@codesourcery.com>
* gdb.trace/actions.exp: Clear default-collect.
* gdb.trace/save-trace.exp: Clear default-collect.
H.J. Lu [Fri, 9 Apr 2010 00:18:52 +0000 (00:18 +0000)]
Replace abort with internal_error.
2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
* i387-tdep.c (i387_collect_xsave): Replace abort with
internal_error.
Doug Kwan [Fri, 9 Apr 2010 00:04:30 +0000 (00:04 +0000)]
2010-04-08 Doug Kwan <dougkwan@google.com>
* merge.cc (Output_merge_data::set_final_data_size): Handle empty
Output_merge_data.
* output.cc (Output_section::add_merge_input_section): Simplify
code and return status of Output_merge_base::add_input_section.
Update merge section map only if Output_merge_base::add_input_section
returns true.
Alan Modra [Fri, 9 Apr 2010 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Fri, 9 Apr 2010 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Stan Shebs [Thu, 8 Apr 2010 23:13:46 +0000 (23:13 +0000)]
2010-04-08 Stan Shebs <stan@codesourcery.com>
* breakpoint.c (default_collect_info): New function.
(breakpoints_info): Call it.
(maintenance_info_breakpoints): Ditto.
(tracepoints_info): Ditto.
H.J. Lu [Thu, 8 Apr 2010 22:50:34 +0000 (22:50 +0000)]
Re-indent i387_collect_xsave.
H.J. Lu [Thu, 8 Apr 2010 22:32:38 +0000 (22:32 +0000)]
Support i386 without SSE.
gdb/
2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
* i386-linux-nat.c (have_ptrace_getfpxregs): Initialize to -1
if HAVE_PTRACE_GETFPXREGS is defined.
(i386_linux_read_description): Set have_ptrace_getfpxregs and
have_ptrace_getregset to 0 if ptrace PTRACE_GETFPXREGS failed.
* i386-linux-tdep.c: Include "features/i386/i386-mmx-linux.c"
(i386_linux_core_read_description): Return tdesc_i386_mmx_linux
if .reg-xfp section doesn't exist.
(_initialize_i386_linux_tdep): Call initialize_tdesc_i386_mmx_linux.
* i386-linux-tdep.h (tdesc_i386_mmx_linux): New.
* i386-tdep.c: Include "features/i386/i386-mmx.c".
(i386_go32_init_abi): Set tdesc to tdesc_i386_mmx.
(i386_validate_tdesc_p): Make org.gnu.gdb.i386.sse optional. Set
xcr0 to I386_XSTATE_X87_MASK if SSE isn't available.
(i386_gdbarch_init): Update comments.
(_initialize_i386_tdep): Call initialize_tdesc_i386_mmx.
* common/i386-xstate.h (I386_XSTATE_X87_MASK): New.
* config/djgpp/fnchange.lst: Add i386 MMX XML files.
* features/Makefile (i386/i386-mmx-expedite): New.
(i386/i386-mmx-linux-expedite): Likewise.
($(outdir)/i386/i386-mmx.dat): Likewise.
($(outdir)/i386/i386-mmx-linux.dat): Likewise.
* features/i386/i386-mmx-linux.c: New.
* features/i386/i386-mmx-linux.xml: Likewise.
* features/i386/i386-mmx.c: Likewise.
* features/i386/i386-mmx.xml: Likewise.
* regformats/i386/i386-mmx-linux.dat: Likewise.
* regformats/i386/i386-mmx.dat: Likewise.
* features/Makefile (WHICH): Add i386/i386-mmx and
i386/i386-mmx-linux.
gdb/doc/
2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
* gdb.texinfo (i386 Features): Make org.gnu.gdb.i386.avx
optional. Make org.gnu.gdb.i386.avx requires
org.gnu.gdb.i386.avx.
gdb/gdbserver/
2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (clean): Also remove i386-mmx.c i386-mmx-linux.c.
(i386-mmx.o): New.
(i386-mmx.c): Likewise.
(i386-mmx-linux.o): Likewise.
(i386-mmx-linux.c): Likewise.
* configure.srv (srv_i386_regobj): Add i386-mmx.o.
(srv_i386_linux_regobj): Add i386-mmx-linux.o.
(srv_i386_xmlfiles): Add i386/i386-mmx.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-mmx-linux.xml.
* linux-x86-low.c (init_registers_i386_mmx_linux): New.
(x86_linux_update_xmltarget): Call init_registers_i386_mmx_linux
and return if ptrace PTRACE_GETFPXREGS failed in 32bit.
Doug Evans [Thu, 8 Apr 2010 21:08:40 +0000 (21:08 +0000)]
* source.c (openp): Skip $cdir in PATH.
doc/
* gdb.texinfo (Command Files): Document that gdb skips $cdir in
search path, and document that gdb only scans the search path if
the script's path doesn't specify a directory.
Ralf Wildenhues [Thu, 8 Apr 2010 19:44:08 +0000 (19:44 +0000)]
/:
Merge from gcc:
PR bootstrap/43615
PR bootstrap/43328
Revert:
2010-03-31 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* configure.ac: Do not pass --enable-multilib nor
--disable-multilib in baseargs. Accept explicitly passed
--enable_multilib.
* configure: Regenerate.
Phil Muldoon [Thu, 8 Apr 2010 10:47:56 +0000 (10:47 +0000)]
2010-04-08 Phil Muldoon <pmuldoon@redhat.com>
* python/py-lazy-string.c (stpy_convert_to_value): Add i8n to error string.
Phil Muldoon [Thu, 8 Apr 2010 10:28:42 +0000 (10:28 +0000)]
2010-04-08 Phil Muldoon <pmuldoon@redhat.com>
PR python/11417
* python/py-lazy-string.c (stpy_convert_to_value): Check for
a NULL address.
(gdbpy_create_lazy_string_object): Allow strings with a NULL
address and a zero length.
2010-04-08 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-value: Add null string variable.
(test_lazy_string): Test zero length, NULL address lazy
strings.
Hui Zhu [Thu, 8 Apr 2010 09:23:06 +0000 (09:23 +0000)]
2010-04-08 Hui Zhu <teawater@gmail.com>
* i386-tdep.c (i386_process_record): Add support for insn
rdtsc.
Doug Kwan [Thu, 8 Apr 2010 06:56:15 +0000 (06:56 +0000)]
2010-04-07 Doug Kwan <dougkwan@google.com>
* arm.cc (Arm_relobj::scan_section_for_cortex_a8_erratum): Warn
if section is marked as containing instructions but has no mapping
symbols.
(Arm_relobj::do_count_local_symbols): Call adjust_sym_shndx to get
correct section index.
(Arm_relobj::find_linked_text_section): Ditto.
Doug Evans [Thu, 8 Apr 2010 04:57:25 +0000 (04:57 +0000)]
* python/python.c (source_python_script): Use ensure_python_env
to prepare environment for script.
Alan Modra [Thu, 8 Apr 2010 02:09:59 +0000 (02:09 +0000)]
* internal.h (ELF_IS_SECTION_IN_SEGMENT): PT_PHDR program headers
cannot contain any sections.
Alan Modra [Thu, 8 Apr 2010 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Thu, 8 Apr 2010 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Cary Coutant [Wed, 7 Apr 2010 22:58:23 +0000 (22:58 +0000)]
* archive.cc (include_member): Destroy Read_symbols_data object before
releasing file.
* object.cc (Read_symbols_data::~Read_symbols_data) New destructor.
* object.h (Read_symbols_data::Read_symbols_data) New constructor.
(Read_symbols_data::~Read_symbols_data) New destructor.
(Section_relocs::Section_relocs) New constructor.
(Section_relocs::~Section_relocs) New destructor.
(Read_relocs_data::Read_relocs_data) New constructor.
(Read_relocs_data::~Read_relocs_data) New destructor.
* testsuite/binary_unittest.cc (Sized_binary_test): Set sd member
pointers to NULL after deleting.
Doug Kwan [Wed, 7 Apr 2010 21:42:22 +0000 (21:42 +0000)]
2010-04-07 Doug Kwan <dougkwan@google.com>
* arm.cc: Replace "endianity" with "endianness" in comments.
(Arm_exidx_cantunwind): Ditto.
(Arm_relobj::Arm_relobj): Initialize merge_flags_and_attribures.
(Arm_relobj::merge_flags_and_attributes): New method.
(Arm_relobj::merge_flags_and_attributes_): New data member.
(Arm_exidx_cantunwind::do_fixed_endian_write): Fix formatting.
(Arm_relobj::scan_sections_for_stubs): Ditto.
(Arm_relobj::do_read_symbols): Check to see if we really want to
merge processor-specific flags and attributes. Exit early if
an object is empty except for section names and the undefined symbol.
(Target_arm::do_finalize_sections): Move check for ELF format to
Arm_relobj::do_read_symbols. Merge processor specific flags and
attributes from a regular object only when we have determined that
it is aapropriate. Do not create an .ARM.attributes section in
output if there is no regular input object.
(Target_arm::merge_processor_specific_flags): Check
--warn-mismatch before printing any error.
(Target_arm::merge_object_attributes): Ditto.
* gold.cc (queue_middle_tasks): Handle the case in which there is
no regular object in input.
* options.cc (General_options::parse_EB): New method.
(General_options::parse_EL): Same.
(General_options::General_options): Initialize endianness_.
* options.h (-EB, -EL, -no-pipeline-knowledge, -p, --warn-mismatch):
New options.
(General_options::Endianness): New enum.
(General_options::endianness): New method.
(General_options::endianness_): New data member.
* parameters.cc (Parameters::set_options): Check target endianness.
(Parameters::set_target_once): Ditto.
(Parameters::check_target_endianness): New method.
(parameters_force_valid_target): If either -EL or -EB is specified,
use it to define endianness of default target.
* parameters.h (Parameters::check_target_endianness): New method
declaration.
* target.h (class Target): Change "endianity" to "endianness"
in comments.
DJ Delorie [Wed, 7 Apr 2010 21:16:24 +0000 (21:16 +0000)]
merge from gcc
Ralf Wildenhues [Wed, 7 Apr 2010 21:08:01 +0000 (21:08 +0000)]
Use Automake option no-dist in gold.
gold/:
* configure.ac (AM_INIT_AUTOMAKE): Add option no-dist.
* configure: Regenerate.
* Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
H.J. Lu [Wed, 7 Apr 2010 18:49:46 +0000 (18:49 +0000)]
Add x86 AVX support to gdbserver.
2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (clean): Updated.
(i386-avx.o): New.
(i386-avx.c): Likewise.
(i386-avx-linux.o): Likewise.
(i386-avx-linux.c): Likewise.
(amd64-avx.o): Likewise.
(amd64-avx.c): Likewise.
(amd64-avx-linux.o): Likewise.
(amd64-avx-linux.c): Likewise.
* configure.srv (srv_i386_regobj): Add i386-avx.o.
(srv_i386_linux_regobj): Add i386-avx-linux.o.
(srv_amd64_regobj): Add amd64-avx.o.
(srv_amd64_linux_regobj): Add amd64-avx-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx.xml.
(srv_i386_xmlfiles): Add i386/i386-avx.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx-linux.xml.
* i387-fp.c: Include "i386-xstate.h".
(i387_xsave): New.
(i387_cache_to_xsave): Likewise.
(i387_xsave_to_cache): Likewise.
(x86_xcr0): Likewise.
* i387-fp.h (i387_cache_to_xsave): Likewise.
(i387_xsave_to_cache): Likewise.
(x86_xcr0): Likewise.
* linux-arm-low.c (target_regsets): Initialize nt_type to 0.
* linux-crisv32-low.c (target_regsets): Likewise.
* linux-m68k-low.c (target_regsets): Likewise.
* linux-mips-low.c (target_regsets): Likewise.
* linux-ppc-low.c (target_regsets): Likewise.
* linux-s390-low.c (target_regsets): Likewise.
* linux-sh-low.c (target_regsets): Likewise.
* linux-sparc-low.c (target_regsets): Likewise.
* linux-xtensa-low.c (target_regsets): Likewise.
* linux-low.c: Include <sys/uio.h>.
(regsets_fetch_inferior_registers): Support nt_type.
(regsets_store_inferior_registers): Likewise.
(linux_process_qsupported): New.
(linux_target_ops): Add linux_process_qsupported.
* linux-low.h (regset_info): Add nt_type.
(linux_target_ops): Add process_qsupported.
* linux-x86-low.c: Include "i386-xstate.h", "elf/common.h"
and <sys/uio.h>.
(init_registers_i386_avx_linux): New.
(init_registers_amd64_avx_linux): Likewise.
(xmltarget_i386_linux_no_xml): Likewise.
(xmltarget_amd64_linux_no_xml): Likewise.
(PTRACE_GETREGSET): Likewise.
(PTRACE_SETREGSET): Likewise.
(x86_fill_xstateregset): Likewise.
(x86_store_xstateregset): Likewise.
(use_xml): Likewise.
(x86_linux_update_xmltarget): Likewise.
(x86_linux_process_qsupported): Likewise.
(target_regsets): Add NT_X86_XSTATE entry and Initialize nt_type.
(x86_arch_setup): Don't call init_registers_amd64_linux nor
init_registers_i386_linux here. Call
x86_linux_update_xmltarget.
(the_low_target): Add x86_linux_process_qsupported.
* server.c (handle_query): Call target_process_qsupported.
* target.h (target_ops): Add process_qsupported.
(target_process_qsupported): New.
H.J. Lu [Wed, 7 Apr 2010 18:47:57 +0000 (18:47 +0000)]
Checkin gdb.arch/i386-avx.exp.
H.J. Lu [Wed, 7 Apr 2010 18:46:50 +0000 (18:46 +0000)]
Support amd64 AVX.
gdb/
2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
* amd64-linux-nat.c: Include "regset.h", "elf/common.h",
<sys/uio.h> and "i386-xstate.h".
(PTRACE_GETREGSET): New.
(PTRACE_SETREGSET): Likewise.
(have_ptrace_getregset): Likewise.
(amd64_linux_gregset64_reg_offset): Include 16 upper YMM
registers.
(amd64_linux_gregset32_reg_offset): Include 8 upper YMM
registers.
(amd64_linux_fetch_inferior_registers): Support PTRACE_GETFPREGS.
(amd64_linux_store_inferior_registers): Likewise.
(amd64_linux_read_description): Check and enable AVX target
descriptions.
* amd64-linux-tdep.c: Include "regset.h", "i386-linux-tdep.h"
and "features/i386/amd64-avx-linux.c".
(amd64_linux_regset_sections): New.
(amd64_linux_core_read_description): Check and enable AVX
target description.
(amd64_linux_init_abi): Set xsave_xcr0_offset. Call
set_gdbarch_core_regset_sections.
(_initialize_amd64_linux_tdep): Call
initialize_tdesc_amd64_avx_linux.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Replace
AMD64_MXCSR_REGNUM with AMD64_YMM15H_REGNUM.
(tdesc_amd64_avx_linux): New.
(amd64_linux_update_xstateregset): Likewise.
* amd64-tdep.c: Include "features/i386/amd64-avx.c".
(amd64_ymm_names): New.
(amd64_ymmh_names): Likewise.
(amd64_register_name): Likewise.
(amd64_supply_xstateregset): Likewise.
(amd64_collect_xstateregset): Likewise.
(amd64_supply_xsave): Likewise.
(amd64_collect_xsave): Likewise.
(AMD64_NUM_REGS): Removed.
(amd64_dwarf_reg_to_regnum): Return %ymmN register number for
%xmmN if AVX is available.
(amd64_pseudo_register_name): Support pseudo YMM registers.
(amd64_regset_from_core_section): Support .reg-xstate section.
(amd64_init_abi): Set ymmh_register_names, num_ymm_regs
and ymm0h_regnum. Call set_gdbarch_register_name.
(amd64_init_abi): Call initialize_tdesc_amd64_avx.
* amd64-tdep.h (amd64_regnum): Add AMD64_YMM0H_REGNUM and
AMD64_YMM15H_REGNUM.
(AMD64_NUM_REGS): New.
(amd64_supply_xsave): Likewise.
(amd64_collect_xsave): Likewise.
(amd64_register_name): Removed.
(amd64_register_type): Likewise.
gdb/testsuite/
2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
* gdb.arch/i386-avx.c: New.
* gdb.arch/i386-avx.exp: Likewise.
* gdb.arch/i386-cpuid.h: Updated from gcc 4.4.
H.J. Lu [Wed, 7 Apr 2010 18:44:57 +0000 (18:44 +0000)]
Support i387 AVX.
2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
* i387-tdep.c: Include "i386-xstate.h".
(XSAVE_XSTATE_BV_ADDR): New.
(xsave_avxh_offset): Likewise.
(XSAVE_AVXH_ADDR): Likewise.
(i387_supply_xsave): Likewise.
(i387_collect_xsave): Likewise.
* i387-tdep.h (I387_NUM_YMM_REGS): New.
(I387_YMM0H_REGNUM): Likewise.
(I387_YMMENDH_REGNUM): Likewise.
(i387_supply_xsave): Likewise.
(i387_collect_xsave): Likewise.
H.J. Lu [Wed, 7 Apr 2010 18:43:45 +0000 (18:43 +0000)]
Support i386 AVX.
2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
* i386-linux-nat.c: Include "regset.h", "elf/common.h",
<sys/uio.h> and "i386-xstate.h".
(PTRACE_GETREGSET): New.
(PTRACE_SETREGSET): Likewise.
(fetch_xstateregs): Likewise.
(store_xstateregs): Likewise.
(GETXSTATEREGS_SUPPLIES): Likewise.
(regmap): Include 8 upper YMM registers.
(i386_linux_fetch_inferior_registers): Support XSAVE extended
state.
(i386_linux_store_inferior_registers): Likewise.
(i386_linux_read_description): Check and enable AVX target
descriptions.
* i386-linux-tdep.c: Include "regset.h", "i387-tdep.h",
"i386-xstate.h" and "features/i386/i386-avx-linux.c".
(i386_linux_regset_sections): Add ".reg-xstate".
(i386_linux_gregset_reg_offset): Include 8 upper YMM registers.
(i386_linux_core_read_xcr0): New.
(i386_linux_core_read_description): Check and enable AVX target
description.
(i386_linux_init_abi): Set xsave_xcr0_offset.
(_initialize_i386_linux_tdep): Call
initialize_tdesc_i386_avx_linux.
* i386-linux-tdep.h (I386_LINUX_ORIG_EAX_REGNUM): Replace
I386_SSE_NUM_REGS with I386_AVX_NUM_REGS.
(i386_linux_core_read_xcr0): New.
(tdesc_i386_avx_linux): Likewise.
(I386_LINUX_XSAVE_XCR0_OFFSET): Likewise.
* i386-tdep.c: Include "i386-xstate.h" and
"features/i386/i386-avx.c".
(i386_ymm_names): New.
(i386_ymmh_names): Likewise.
(i386_ymmh_regnum_p): Likewise.
(i386_ymm_regnum_p): Likewise.
(i386_xmm_regnum_p): Likewise.
(i386_register_name): Likewise.
(i386_ymm_type): Likewise.
(i386_supply_xstateregset): Likewise.
(i386_collect_xstateregset): Likewise.
(i386_sse_regnum_p): Removed.
(i386_pseudo_register_name): Support pseudo YMM registers.
(i386_pseudo_register_type): Likewise.
(i386_pseudo_register_read): Likewise.
(i386_pseudo_register_write): Likewise.
(i386_dbx_reg_to_regnum): Return %ymmN register number for
%xmmN if AVX is available.
(i386_regset_from_core_section): Support .reg-xstate section.
(i386_register_reggroup_p): Supper upper YMM and YMM registers.
(i386_process_record): Replace i386_sse_regnum_p with
i386_xmm_regnum_p.
(i386_validate_tdesc_p): Support org.gnu.gdb.i386.avx feature.
Set ymmh_register_names, num_ymm_regs, ymm0h_regnum and xcr0.
(i386_gdbarch_init): Set xstateregset. Set xsave_xcr0_offset.
Call set_gdbarch_register_name. Replace I386_SSE_NUM_REGS with
I386_AVX_NUM_REGS. Set ymmh_register_names, ymm0h_regnum and
num_ymm_regs. Add num_ymm_regs to set_gdbarch_num_pseudo_regs.
Set ymm0_regnum.
(_initialize_i386_tdep): Call initialize_tdesc_i386_avx.
* i386-tdep.h (gdbarch_tdep): Add xstateregset, ymm0_regnum,
xcr0, xsave_xcr0_offset, ymm0h_regnum, ymmh_register_names and
i386_ymm_type.
(i386_regnum): Add I386_YMM0H_REGNUM, and I386_YMM7H_REGNUM.
(I386_AVX_NUM_REGS): New.
(i386_xmm_regnum_p): Likewise.
(i386_ymm_regnum_p): Likewise.
(i386_ymmh_regnum_p): Likewise.
* common/i386-xstate.h: New.
H.J. Lu [Wed, 7 Apr 2010 18:41:49 +0000 (18:41 +0000)]
Add x86 AVX XML files.
2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
* config/djgpp/fnchange.lst: Add x86 AVX XML files.
* features/Makefile (WHICH): Add i386/i386-avx,
i386/i386-avx-linux, i386/x86-64-avx and i386/x86-64-avx-linux.
(i386/i386-avx-expedite): New.
(i386/i386-avx-linux-expedite): Likewise.
(i386/x86-64-avx-expedite):Likewise.
(i386/x86-64-avx-linux-expedite): Likewise.
($(outdir)/i386/i386-avx.dat): New dependency.
($(outdir)/i386/i386-avx-linux.dat): Likewise.
($(outdir)/i386/x86-avx-64.dat): Likewise.
($(outdir)/i386/x86-64-avx-linux.dat): Likewise.
* features/i386/32bit-avx.xml: New.
* features/i386/64bit-avx.xml: Likewise.
* features/i386/i386-avx-linux.c: Likewise.
* features/i386/i386-avx-linux.xml: Likewise.
* features/i386/i386-avx.c: Likewise.
* features/i386/i386-avx.xml: Likewise.
* features/i386/x86-64-avx-linux.c: Likewise.
* features/i386/x86-64-avx-linux.xml: Likewise.
* features/i386/x86-64-avx.c: Likewise.
* features/i386/x86-64-avx.xml: Likewise.
* regformats/i386/i386-avx-linux.dat: Likewise.
* regformats/i386/i386-avx.dat: Likewise.
* regformats/i386/x86-64-avx-linux.dat: Likewise.
* regformats/i386/x86-64-avx.dat: Likewise.
Doug Evans [Wed, 7 Apr 2010 16:54:39 +0000 (16:54 +0000)]
* top.c (source_file_name): Make const char *.
* top.h (source_file_name): Update.
* cli/cli-script.c (source_cleanup_lines_args): Make old_file
const char *.
(script_from_file): Change `file' arg to const char *.
* cli/cli-script.h (script_from_file): Update.
Jie Zhang [Wed, 7 Apr 2010 10:39:06 +0000 (10:39 +0000)]
* config/tc-arm.c (make_mapping_symbol): Handle the case
that multiple mapping symbols have the same value 0.
testsuite/
* gas/arm/mapmisc.s: Test multiple mapping symbols have
the same value 0.
Alan Modra [Wed, 7 Apr 2010 07:20:51 +0000 (07:20 +0000)]
* configure: Regenerate.
Alan Modra [Wed, 7 Apr 2010 07:19:02 +0000 (07:19 +0000)]
* warning.m4 (GCC_WARN_CFLAGS): Only add -Wshadow for gcc-4 and above.
* configure: Regenerate.
Doug Evans [Wed, 7 Apr 2010 03:47:22 +0000 (03:47 +0000)]
Fix regexps in previous checkin.
Doug Evans [Wed, 7 Apr 2010 03:42:55 +0000 (03:42 +0000)]
* cli/cli-cmds.c (source_command): Run cleanups.
testsuite/
* gdb.base/source-test.gdb: New file.
* gdb.base/source.exp: Test source -v.
H.J. Lu [Wed, 7 Apr 2010 02:41:35 +0000 (02:41 +0000)]
Don't bind unique symbol locally.
bfd/
2010-04-06 H.J. Lu <hongjiu.lu@intel.com>
PR ld/11434
* elf-bfd.h (SYMBOLIC_BIND): Don't bind unique symbol locally.
ld/testsuite/
2010-04-06 H.J. Lu <hongjiu.lu@intel.com>
PR ld/11434
* ld/testsuite/ld-x86-64/unique1.d: New.
* ld/testsuite/ld-x86-64/unique1.s: Likewise.
* ld-x86-64/x86-64.exp: Run unique1.
gdbadmin [Wed, 7 Apr 2010 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 7 Apr 2010 00:00:05 +0000 (00:00 +0000)]
daily update
Cary Coutant [Tue, 6 Apr 2010 21:56:24 +0000 (21:56 +0000)]
gcc PR lto/42757
* plugin.cc (Pluginobj::get_symbol_resolution_info): Check for
prevailing definitions of common symbols.
* testsuite/plugin_test_6.sh: New test case.
* testsuite/plugin_common_test_1.c: New test case.
* testsuite/plugin_common_test_2.c: New test case.
* testsuite/Makefile.am (plugin_test_6): New test case.
* testsuite/Makefile.in: Regenerate.
Stan Shebs [Tue, 6 Apr 2010 17:47:40 +0000 (17:47 +0000)]
2010-04-06 Stan Shebs <stan@codesourcery.com>
* defs.h (char_ptr): Move typedef here from...
* ada-lang.c (char_ptr): Remove.
* charset.c (char_ptr): Remove.
* tracepoint.h (struct uploaded_string): Remove.
(struct uploaded_tp): Use vectors for string arrays.
* tracepoint.c (trace_save): Use vectors of actions.
(parse_tracepoint_definition): Ditto.
(get_uploaded_tp): Clear vectors.
* breakpoint.c (create_tracepoint_from_upload): Use vectors.
(next_cmd): Change to an int.
(read_next_cmd): Use vector of command strings.
Doug Evans [Tue, 6 Apr 2010 16:51:18 +0000 (16:51 +0000)]
* top.h (source_script, cd_command): Delete.
* main.c: #include "cli/cli-cmds.h"
Nick Clifton [Tue, 6 Apr 2010 16:12:17 +0000 (16:12 +0000)]
Updated binutils Vietnamese translation.
New gold Vietnamese translation.
New gas Russian translation.
Peter Bergner [Tue, 6 Apr 2010 16:04:34 +0000 (16:04 +0000)]
opcodes/
* ppc-opc.c (RBOPT): New define.
("dccci"): Enable for PPCA2. Make operands optional.
("iccci"): Likewise. Do not deprecate for PPC476.
gas/testsuite/
* gas/ppc/476.d ("dccci", "dci", "iccci"): Add tests.
* gas/ppc/476.s: Likewise.
* gas/ppc/a2.d ("dccci", "dci", "iccci", "ici"): Add tests.
* gas/ppc/a2.s: Likewise.
Nick Clifton [Tue, 6 Apr 2010 15:41:43 +0000 (15:41 +0000)]
* cr16-opc.c (cr16_instruction): Fix typo in comment.
Tristan Gingold [Tue, 6 Apr 2010 13:55:38 +0000 (13:55 +0000)]
2010-04-06 Tristan Gingold <gingold@adacore.com>
* vms-lib.c (_bfd_vms_lib_write_archive_contents): Fix idd flags.
Ulrich Weigand [Tue, 6 Apr 2010 12:45:22 +0000 (12:45 +0000)]
* gdb.cp/inherit.exp (test_print_anon_union): Fix re_class pattern.
David S. Miller [Tue, 6 Apr 2010 11:53:16 +0000 (11:53 +0000)]
* ld-elfvers/vers.exp: Pass -Av9a to assembler on sparc-*-*
Jakub Jelinek [Tue, 6 Apr 2010 07:39:30 +0000 (07:39 +0000)]
merge from gcc
Kevin Buettner [Tue, 6 Apr 2010 00:14:43 +0000 (00:14 +0000)]
* m32c-tdep.c (make_types): When calling `arch_type', pass size of
type in bytes, not bits.
gdbadmin [Tue, 6 Apr 2010 00:00:12 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 6 Apr 2010 00:00:08 +0000 (00:00 +0000)]
daily update
Pierre Muller [Mon, 5 Apr 2010 22:43:49 +0000 (22:43 +0000)]
* gdb/stabsread.c (define_symbol): Add support for char
and string constants.
* gdb/testsuite/gdb.stabs/aout.sed: Convert all backslash to double backslash
within one line, unless it is followed by a double quote.
* gdb/testsuite/gdb.stabs/hppa.sed: Idem.
* gdb/testsuite/gdb.stabs/weird.def: Add char and String constants
* gdb/testsuite/gdb.stabs/weird.exp: Check for correct parsing of
chhar and string constants.
* gdb/testsuite/gdb.stabs/xcoff.sed: Ignore escaped quote quotes
in .stabs to .stabx substitution.
Pierre Muller [Mon, 5 Apr 2010 22:18:53 +0000 (22:18 +0000)]
Remove remaining "%ll" uses.
* go32-nat.c (go32_pte_for_address): Replace "0x%llx" using
hex_string call.
* rs6000-nat.c (rs6000_ptrace64): Idem.
* solib-pa64.c (pa64_current_sos): Idem.
* solib-spu.c (spu_current_sos): Idem.
* linux-nat.c (linux_nat_find_memory_regions): Replace "%lld" using
plongest call.
* nto-procfs.c (procfs_meminfo): Replace "0x%016llx" using
phex (VAR, 8) call.
* sh64-tdep.c (sh64_show_media_regs): Idem.
Stan Shebs [Mon, 5 Apr 2010 21:57:18 +0000 (21:57 +0000)]
2010-04-05 Stan Shebs <stan@codesourcery.com>
* tracepoint.c: Include gdbcore.h.
(tfile_xfer_partial): Return partial results, also try reading
from executable.
(tfile_has_all_memory): New function.
(init_tfile_ops): Use it.
* gdb.trace/tfile.c: Add a variable split across two blocks, and a
constant global.
* gdb.trace/tfile.exp: Try to print them.
DJ Delorie [Mon, 5 Apr 2010 20:13:18 +0000 (20:13 +0000)]
merge from gcc
Jakub Jelinek [Mon, 5 Apr 2010 19:32:06 +0000 (19:32 +0000)]
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Handle CIE version 4
provided that it has the expected address size and zero segment
length.
binutils/
* dwarf.c (struct Frame_Chunk): Add ptr_size and segment_size
fields.
(display_debug_frames): Handle CIE version 4.
Jakub Jelinek [Mon, 5 Apr 2010 19:30:00 +0000 (19:30 +0000)]
include/
* dwarf2.h (DWARF2_Internal_LineInfo): Add li_max_ops_per_insn
field.
bfd/
* dwarf2.c (struct line_head): Add maximum_ops_per_insn field.
(struct line_info): Add op_index field, change end_sequence type to
unsigned char.
(new_line_sorts_after): For the same address compare op_index.
(add_line_info): Add op_index argument, store it into the structure.
(decode_line_info): Complain about unknown versions of .debug_line.
Initialize maximum_ops_per_insn. Add op_index state register and
track it.
binutils/
* dwarf.c (struct State_Machine_Registers): Add op_index field,
change end_sequence type to unsigned char.
(reset_state_machine): Clear op_index.
(process_extended_line_op): For DW_LNE_set_address clear op_index.
(display_debug_lines_raw): Initialize li_max_ops_per_insn.
Track op_index state machine register and print it if
li_max_ops_per_insn is != 1.
(display_debug_lines_decoded): Likewise.
DJ Delorie [Mon, 5 Apr 2010 18:02:22 +0000 (18:02 +0000)]
merge from gcc
Doug Evans [Mon, 5 Apr 2010 17:14:57 +0000 (17:14 +0000)]
* gdb.texinfo (maint show python auto-load): Fix typo.
Sergio Durigan Junior [Mon, 5 Apr 2010 15:58:53 +0000 (15:58 +0000)]
2010-03-23 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/10736:
* xml-syscall.c (my_gdb_datadir): New variable to keep track of
the changes in data-directory.
(init_sysinfo): Reload the syscall XML file if the data-directory
has changed.
Jan Kratochvil [Mon, 5 Apr 2010 10:07:30 +0000 (10:07 +0000)]
gdb/
Code cleanup.
* breakpoint.c (bpstat_stop_status): Use bpstat_causes_stop.
Kai Tietz [Mon, 5 Apr 2010 09:04:09 +0000 (09:04 +0000)]
2010-04-05 Kai Tietz <kai.tietz@onevision.com>
* emultempl/pep.em (U): Macro modified.
(U_SIZE): New helper macro.
(GET_INIT_SYMBOL_NAME): Likewise.
(enum options): Add OPTION_NO_LEADING_UNDERSCORE
and OPTION_LEADING_UNDERSCORE enumerator-values.
(gld${EMULATION_NAME}_add_options): Add --(no-)leading-underscore
option.
(definfo): Add new member is_c_symbol.
(D): Add to macro underscore mode parameter.
(init): Add definition for is_c_symbol.
(gld_${EMULATION_NAME}_list_options): Display new options.
(set_pep_name): Adjust underscoring dependent fixed
symbol handling.
(gld_${EMULATION_NAME}_set_symbols): Likewise.
(saw_option): Likewise.
(gld_${EMULATION_NAME}_unrecognized_file): Likewise.
(set_entry_point): Initial initial_symbol_char dependent to
target's default and new option flag pep_leading_underscore.
* emultempl/pe.em (U): Macro modified.
(U_SIZE): New helper macro.
(GET_INIT_SYMBOL_NAME): Likewise.
(OPTION_LEADING_UNDERSCORE): Add new option define.
(OPTION_NO_LEADING_UNDERSCORE): Likewise.
(gld${EMULATION_NAME}_add_options): Add --(no-)leading-underscore
option.
(definfo): Add new member is_c_symbol.
(D): Add to macro underscore mode parameter.
(init): Add definition for is_c_symbol.
(gld_${EMULATION_NAME}_list_options): Display new options.
(set_pep_name): Adjust underscoring dependent fixed
symbol handling.
(gld_${EMULATION_NAME}_set_symbols): Likewise.
(saw_option): Likewise.
(gld_${EMULATION_NAME}_unrecognized_file): Likewise.
(set_entry_point): Initial initial_symbol_char dependent to
target's default and new option flag pep_leading_underscore.
* pe-dll.c (pe_leading_underscore): New flag variable.
(pe_detail_list): Remove const to allow modify of
member underscore.
(pe_dll_id_target): Initialize pe_details' underscore variable
dependent to target's default and flag pe_leading_underscore.
* pe-dll.h (pe_leading_underscore): Add extern declaration of
option flag.
* pep-dll.c (pe_leading_underscore): Add alias define for
pep_leading_underscore.
* pep-dll.h (pep_leading_underscore) Add extern declaration of
option flag.
* ld.texinfo: Add documentation for --(no-)leading-underscore
option.
Kai Tietz [Mon, 5 Apr 2010 09:02:58 +0000 (09:02 +0000)]
2010-04-05 Kai Tietz <kai.tietz@onevision.com>
* ld-pe/orphan_nu.d: New test for --no-leading-underscore.
* ld-pe/orphana_nu.s: New file.
* ld-pe/pe.exp: Add orphan_nu test.
Alan Modra [Mon, 5 Apr 2010 00:00:07 +0000 (00:00 +0000)]
daily update
gdbadmin [Mon, 5 Apr 2010 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Stan Shebs [Sun, 4 Apr 2010 23:47:16 +0000 (23:47 +0000)]
2010-04-04 Stan Shebs <stan@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* breakpoint.c (breakpoint_1): Add filter argument, return number of
breakpoints printed.
(is_hardware_watchpoint): Make argument const.
(is_watchpoint): Ditto.
(is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint,
use it everywhere.
(breakpoints_info): Pass NULL to breakpoint_1.
(maintenance_info_breakpoints): Ditto.
(watchpoints_info): New function.
(tracepoints_info): Use breakpoint_1 filter.
(set_ignore_count): Warn that tracepoint ignore count will be ignored.
(_initialize_breakpoint): Make "info watchpoints" its own command.
* breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint.
* gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym.
(Setting Watchpoints): Update description of "info watch".
(Disabling Breakpoints): Only "info break" lists all.
* gdb.base/completion.exp: Update for new "info watchpoints".
* gdb.base/default.exp: Ditto.
* gdb.base/help.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.trace/infotrace.exp: Update "info tracpoints" output.
Stan Shebs [Sun, 4 Apr 2010 23:31:29 +0000 (23:31 +0000)]
2010-04-04 Stan Shebs <stan@codesourcery.com>
* tracepoint.c (tfile_fetch_registers): Add fallback case.
* gdb.texinfo (Tracepoint Restrictions): Document PC inference.
(tdump): Explain how tdump works.
* gdb.trace/tfile.exp: Sharpen tfind test.
Jan Kratochvil [Sun, 4 Apr 2010 22:12:14 +0000 (22:12 +0000)]
gdb/
* infcmd.c (run_command_1): Call proceed with regcache_read_pc address.
* config/djgpp/fnchange.lst: Add translation for break-entry.exp.
gdb/testsuite/
* gdb.base/break-entry.exp: New.
Jan Kratochvil [Sun, 4 Apr 2010 13:54:51 +0000 (13:54 +0000)]
gdb/
* breakpoint.c (bpstat_find_step_resume_breakpoint): Remove.
* breakpoint.h (bpstat_find_step_resume_breakpoint): Remove.
gdbadmin [Sun, 4 Apr 2010 00:00:45 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 4 Apr 2010 00:00:11 +0000 (00:00 +0000)]
daily update
Pedro Alves [Sat, 3 Apr 2010 23:14:18 +0000 (23:14 +0000)]
* inferiors.c (add_thread): Set last_status kind to
TARGET_WAITKIND_IGNORE.
* linux-low.c (cancel_breakpoint): Remove unnecessary regcache
fetch. Use ptid_of. Avoid unnecessary get_lwp_thread calls.
(linux_wait_1): Move `thread' local definition to block that uses
it. Don't NULL initialize `event_child'.
(linux_resume_one_thread): Avoid unnecessary get_lwp_thread calls.
Alway set the thread's last_status to TARGET_WAITKIND_IGNORE.
* linux-x86-low.c (x86_breakpoint_at): Read raw memory.
gdbadmin [Sat, 3 Apr 2010 00:00:10 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 2 Apr 2010 23:00:06 +0000 (23:00 +0000)]
daily update
Mike Frysinger [Fri, 2 Apr 2010 18:25:27 +0000 (18:25 +0000)]
sim: fix typos in hw-ports.h
Jan Kratochvil [Fri, 2 Apr 2010 15:21:47 +0000 (15:21 +0000)]
gdb/
* dwarf2read.c (read_namespace_type): Use common "return set_die_type"
code form.
Hui Zhu [Fri, 2 Apr 2010 05:13:09 +0000 (05:13 +0000)]
2010-04-02 Hui Zhu <teawater@gmail.com>
Michael Snyder <msnyder@vmware.com>
* gdb.reverse/i386-sse-reverse.exp: New file.
* gdb.reverse/i386-sse-reverse.c: New file.
Hui Zhu [Fri, 2 Apr 2010 05:09:29 +0000 (05:09 +0000)]
2010-04-02 Hui Zhu <teawater@gmail.com>
* i386-tdep.c (OT_DQUAD): New enum.
(i386_process_record): Add code for MMX, 3DNow!, SSE, SSE2,
SSE3, SSSE3 and SSE4.
Hui Zhu [Fri, 2 Apr 2010 05:04:57 +0000 (05:04 +0000)]
2010-04-02 Hui Zhu <teawater@gmail.com>
* i386-tdep.c (i386_record_lea_modrm_addr): Remove useless
"*addr = 0".
Pedro Alves [Fri, 2 Apr 2010 01:39:53 +0000 (01:39 +0000)]
* tracepoint.c (trace_dump_actions): New, factored out from
trace_dump_command, and adjusted to recurse into while-stepping's
action list.
(trace_dump_command): Use it.
Pedro Alves [Fri, 2 Apr 2010 01:31:59 +0000 (01:31 +0000)]
* gdb.trace/tfind.exp: Adjust expected disassembly output.
Pedro Alves [Fri, 2 Apr 2010 01:18:35 +0000 (01:18 +0000)]
* breakpoint.h (struct counted_command_line): Moved definition to
breakpoint.c, and forward declare.
(breakpoint_commands): Declare.
* breakpoint.c (struct counted_command_line): Moved here.
(breakpoint_commands): New.
* tracepoint.c (encode_actions): Use breakpoint_commands.
* remote.c (remote_download_tracepoint): Ditto.
gdbadmin [Fri, 2 Apr 2010 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
H.J. Lu [Thu, 1 Apr 2010 23:13:24 +0000 (23:13 +0000)]
Use hex_string instead of phex_nz for error.
2010-04-01 H.J. Lu <hongjiu.lu@intel.com>
* remote.c (remote_parse_stop_reply): Use hex_string instead
of phex_nz for error.
Alan Modra [Thu, 1 Apr 2010 23:00:04 +0000 (23:00 +0000)]
daily update
Stan Shebs [Thu, 1 Apr 2010 22:57:25 +0000 (22:57 +0000)]
2010-04-01 Stan Shebs <stan@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* tracepoint.h (enum actionline_type): Remove.
(validate_actionline): Change return to void.
* tracepoint.c (report_agent_reqs_errors): New function.
(validate_actionline): Call it, change return to void, report errors
more consistently.
(collect_symbol): Call report_agent_reqs_errors.
(encode_actions_1): Ditto.
(encode_actions): Don't expect a result from validate_actionline.
* gdb.trace/actions.exp: Tweak expected output.
* gdb.trace/while-stepping.exp: Tweak expected output.
Stan Shebs [Thu, 1 Apr 2010 20:30:56 +0000 (20:30 +0000)]
2010-04-01 Stan Shebs <stan@codesourcery.com>
* tracepoint.c (trace_start_command): Confirm if trace is running.
(trace_stop_command): Error if trace not running.
H.J. Lu [Thu, 1 Apr 2010 20:02:10 +0000 (20:02 +0000)]
Support "ah", "bh", "ch", "dh" on amd64.
gdb/
2010-04-01 H.J. Lu <hongjiu.lu@intel.com>
* amd64-tdep.c (amd64_byte_names): Add "ah", "bh", "ch", "dh".
(AMD64_NUM_LOWER_BYTE_REGS): New.
(amd64_pseudo_register_read): Handle "ah", "bh", "ch", "dh".
(amd64_pseudo_register_write): Likewise.
(amd64_init_abi): Set num_byte_regs to 20.
gdb/testsuite/
2010-04-01 H.J. Lu <hongjiu.lu@intel.com>
* gdb.arch/amd64-byte.exp: Check "ah", "bh", "ch", "dh".
Pedro Alves [Thu, 1 Apr 2010 15:31:26 +0000 (15:31 +0000)]
* linux-low.c (get_stop_pc): Don't adjust the PC if stopped with
an extended waitstatus, or by a watchpoint.
(cancel_breakpoints_callback): Don't cancel a breakpoint if the
thread was stepping or has been stopped by a watchpoint.
Pedro Alves [Thu, 1 Apr 2010 14:26:53 +0000 (14:26 +0000)]
* mem-break.c (struct raw_breakpoint): New field shlib_disabled.
(set_gdb_breakpoint_at): If GDB is inserting a breakpoint on top
of another, then delete the previous, and validate all
breakpoints.
(validate_inserted_breakpoint): New.
(delete_disabled_breakpoints): New.
(validate_breakpoints): New.
(check_mem_read): Validate breakpoints before trusting their
shadow. Delete disabled breakpoints.
(check_mem_write): Validate breakpoints before trusting they
should be inserted. Delete disabled breakpoints.
* mem-break.h (validate_breakpoints):
* server.c (handle_query): Validate breakpoints when we see a
qSymbol query.
Pedro Alves [Thu, 1 Apr 2010 14:25:34 +0000 (14:25 +0000)]
* linux-low.c (linux_wait_1): Avoid setting need_step_over is
there's a GDB breakpoint at stop_pc. Always report a trap to GDB
if we could tell there's a GDB breakpoint at stop_pc.
(need_step_over_p): Don't do a step over if we find a GDB
breakpoint at the resume PC.
* mem-break.c (struct raw_breakpoint): New.
(enum bkpt_type): New type `gdb_breakpoint'.
(struct breakpoint): Delete the `PC', `old_data' and `inserted'
fields. New field `raw'.
(find_raw_breakpoint_at): New.
(set_raw_breakpoint_at): Handle refcounting. Create a raw
breakpoint instead.
(set_breakpoint_at): Adjust.
(delete_raw_breakpoint): New.
(release_breakpoint): New.
(delete_breakpoint): Rename to...
(delete_breakpoint_1): ... this. Add proc parameter. Use
release_breakpoint. Return ENOENT.
(delete_breakpoint): Reimplement.
(find_breakpoint_at): Delete.
(find_gdb_breakpoint_at): New.
(delete_breakpoint_at): Delete.
(set_gdb_breakpoint_at): New.
(delete_gdb_breakpoint_at): New.
(gdb_breakpoint_here): New.
(set_reinsert_breakpoint): Use release_breakpoint.
(uninsert_breakpoint): Rename to ...
(uninsert_raw_breakpoint): ... this.
(uninsert_breakpoints_at): Adjust to handle raw breakpoints.
(reinsert_raw_breakpoint): Change parameter type to
raw_breakpoint.
(reinsert_breakpoints_at): Adjust to handle raw breakpoints
instead.
(check_breakpoints): Adjust. Use release_breakpoint.
(breakpoint_here): Rewrite using find_raw_breakpoint_at.
(breakpoint_inserted_here): Ditto.
(check_mem_read): Adjust to iterate over raw breakpoints instead.
Don't trust the breakpoint's shadow if it is not inserted.
(check_mem_write): Adjust to iterate over raw breakpoints instead.
(delete_all_breakpoints): Adjust.
(free_all_breakpoints): Mark all breakpoints as uninserted, and
use delete_breakpoint_1.
* mem-break.h (breakpoints_supported): Delete declaration.
(set_gdb_breakpoint_at): Declare.
(gdb_breakpoint_here): Declare.
(delete_breakpoint_at): Delete.
(delete_gdb_breakpoint_at): Declare.
* server.h (struct raw_breakpoint): Forward declare.
(struct process_info): New field `raw_breakpoints'.
* linux-x86-low.c (x86_insert_point, x86_remote_point): Handle Z0
breakpoints.
Pedro Alves [Thu, 1 Apr 2010 14:11:24 +0000 (14:11 +0000)]
gdb/
* breakpoint.c (multi_start, multi_end, last_was_multi): Delete.
(prev_breakpoint_count): New.
(set_breakpoint_count): Adjust.
(rbreak_start_breakpoint_count): New.
(start_rbreak_breakpoints): Adjust.
(end_rbreak_breakpoints): Adjust.
(struct commands_info) <arg>: New field.
(do_map_commands_command): Tweak output to include breakpoint spec
range.
(commands_command_1): Adjust. Avoid setting an xfree cleanup if
ARG was empty on entry. Set INFO's arg.
(create_breakpoint): Adjust.
* NEWS: Clarify `commands' changes.
gdb/doc/
* gdb.texinfo (Break Commands): Clarify `commands' changes, and
add cross reference.
gdb/testsuite/
* gdb.base/commands.exp: Adjust.
* gdb.cp/extern-c.exp: Adjust.
Tristan Gingold [Thu, 1 Apr 2010 13:07:19 +0000 (13:07 +0000)]
Add missing file from my previous commit.
Andreas Schwab [Thu, 1 Apr 2010 11:46:33 +0000 (11:46 +0000)]
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Define.
* Makefile.in: Regenerate.
This page took 0.04567 seconds and 4 git commands to generate.