Eli Zaretskii [Mon, 13 Jan 2014 18:54:47 +0000 (20:54 +0200)]
Fix MinGW compilation errors in gdbserver/.
gdb/gdbserver/Makefile.in (INCLUDE_CFLAGS): Remove trailing slash from
"-I$(srcdir)/../". Fixes MinGW compilation errors with old GCC versions.
Ma Jiang [Mon, 13 Jan 2014 16:06:28 +0000 (16:06 +0000)]
2014-01-13 Ma Jiang <ma.jiang@zte.com.cn>
PR ld/16202
* elf32-arm.c (elf32_arm_final_link_relocate): Refetch addends for
R_ARM_ABS8 and R_ARM_ABS16.
Pedro Alves [Mon, 13 Jan 2014 14:56:29 +0000 (14:56 +0000)]
tfile: Don't infer the PC from the tracepoint if the PC is a pseudo-register.
This PC guessing can't work when the PC is a pseudo-register.
Pseudo-register values don't end up stored in the regcache, they're
always recomputed. And, it's actually wrong to try to write a
pseudo-register with regcache_raw_supply. Skip it and add a comment.
gdb/
2014-01-13 Pedro Alves <palves@redhat.com>
* tracepoint.c (tfile_fetch_registers): Don't infer the PC from
the tracepoint if the PC is a pseudo-register.
Tom Tromey [Sat, 28 Dec 2013 22:32:27 +0000 (15:32 -0700)]
replace XCALLOC with XCNEWVEC or XCNEW
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
Tom Tromey [Sat, 28 Dec 2013 22:31:23 +0000 (15:31 -0700)]
replace XMALLOC with XNEW
This replaces XMALLOC with XNEW, and removes XMALLOC. The only
non-mechanical bit here was remembering to edit gdbarch.sh.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XMALLOC): Remove.
* avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cli-out.c (struct ui_out *): Likewise.
* cli/cli-dump.c (add_dump_command): Likewise.
(add_dump_command): Likewise.
* complaints.c (get_complaints): Likewise.
(find_complaint): Likewise.
* dwarf2-frame.c (execute_cfa_program): Likewise.
* dwarf2read.c (abbrev_table_read_table): Likewise.
* gdbarch.sh: Likewise.
* gdbarch.c: Rebuild.
* inf-ttrace.c (inf_ttrace_add_page): Likewise.
* interps.c (interp_new): Likewise.
* lm32-tdep.c (lm32_gdbarch_init): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* mi/mi-console.c (mi_console_file_new): Likewise.
* mi/mi-interp.c (mi_interpreter_init): Likewise.
* mi/mi-out.c (mi_out_new): Likewise.
* mi/mi-parse.c (mi_parse): Likewise.
* microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* observer.c (xalloc_observer_list_node): Likewise.
* regcache.c (regcache_xmalloc_1): Likewise.
* reggroups.c (reggroup_new): Likewise.
(_initialize_reggroup): Likewise.
* registry.c (register_data_with_cleanup): Likewise.
* remote.c (remote_notif_stop_alloc_reply): Likewise.
* ser-base.c (serial_ttystate): Likewise.
* ser-mingw.c (make_pipe_state): Likewise.
* ser-pipe.c (pipe_open): Likewise.
* serial.c (serial_open): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
(tui_alloc_win_info): Likewise.
(tui_add_content_elements): Likewise.
* tui/tui-file.c (tui_file_new): Likewise.
* tui/tui-out.c (tui_out_new): Likewise.
* ui-file.c (mem_file_new): Likewise.
* ui-out.c (push_level): Likewise.
(make_cleanup_ui_out_end): Likewise.
(append_header_to_list): Likewise.
(ui_out_new): Likewise.
* user-regs.c (user_reg_add_builtin): Likewise.
Tom Tromey [Sat, 28 Dec 2013 22:31:01 +0000 (15:31 -0700)]
replace XZALLOC with XCNEW
This replaces XZALLOC with XCNEW and removes XZALLOC.
This change is purely mechanical.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XZALLOC): Remove.
* ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
* ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
(get_ada_tasks_inferior_data): Likewise.
* auto-load.c (get_auto_load_pspace_data): Likewise.
* auxv.c (get_auxv_inferior_data): Likewise.
* bfd-target.c (target_bfd_reopen): Likewise.
* breakpoint.c (get_catch_syscall_inferior_data): Likewise.
(deprecated_insert_raw_breakpoint): Likewise.
* bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
* corelow.c (core_open): Likewise.
* darwin-nat.c (darwin_check_new_threads): Likewise.
(darwin_attach_pid): Likewise.
* dummy-frame.c (dummy_frame_push): Likewise.
* dwarf2-frame.c (dwarf2_frame_cache): Likewise.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
* eval.c (ptrmath_type_p): Likewise.
* exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
* gdbtypes.c (alloc_type_arch): Likewise.
(alloc_type_instance): Likewise.
* hppa-tdep.c (hppa_gdbarch_init): Likewise.
* inf-child.c (inf_child_can_use_agent): Likewise.
* inflow.c (get_inflow_inferior_data): Likewise.
* infrun.c (save_infcall_suspend_state): Likewise.
* jit.c (jit_reader_load): Likewise.
(get_jit_objfile_data): Likewise.
(get_jit_program_space_data): Likewise.
(jit_object_open_impl): Likewise.
(jit_symtab_open_impl): Likewise.
(jit_block_open_impl): Likewise.
(jit_frame_sniffer): Likewise.
* linux-fork.c (add_fork): Likewise.
* maint.c (make_command_stats_cleanup): Likewise.
* objfiles.c (get_objfile_pspace_data): Likewise.
* opencl-lang.c (struct lval_closure): Likewise.
* osdata.c (osdata_start_osdata): Likewise.
* progspace.c (new_address_space): Likewise.
(add_program_space): Likewise.
* remote-sim.c (get_sim_inferior_data): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* skip.c (Ignore): Likewise.
(skip_delete_command): Likewise.
* solib-aix.c (get_solib_aix_inferior_data): Likewise.
(library_list_start_library): Likewise.
(solib_aix_current_sos): Likewise.
* solib-darwin.c (get_darwin_info): Likewise.
(darwin_current_sos): Likewise.
* solib-dsbt.c (get_dsbt_info): Likewise.
* solib-ia64-hpux.c (new_so_list): Likewise.
(ia64_hpux_get_solib_linkage_addr): Likewise.
* solib-spu.c (append_ocl_sos): Likewise.
(spu_current_sos): Likewise.
* solib-svr4.c (get_svr4_info): Likewise.
(svr4_keep_data_in_core): Likewise.
(library_list_start_library): Likewise.
(svr4_default_sos): Likewise.
(svr4_read_so_list): Likewise.
* solib-target.c (library_list_start_library): Likewise.
(solib_target_current_sos): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* symfile-debug.c (install_symfile_debug_logging): Likewise.
* symfile.c (default_symfile_segments): Likewise.
* target-descriptions.c (tdesc_data_init): Likewise.
(tdesc_create_reg): Likewise.
(struct tdesc_type *): Likewise.
(tdesc_create_vector): Likewise.
(tdesc_set_struct_size): Likewise.
(struct tdesc_type *): Likewise.
(tdesc_free_feature): Likewise.
(tdesc_create_feature): Likewise.
* windows-nat.c (windows_add_thread): Likewise.
(windows_make_so): Likewise.
* xml-support.c (gdb_xml_body_text): Likewise.
(gdb_xml_create_parser_and_cleanup): Likewise.
(xml_process_xincludes): Likewise.
* xml-syscall.c (allocate_syscalls_info): Likewise.
(syscall_create_syscall_desc): Likewise.
Alan Modra [Mon, 13 Jan 2014 05:18:24 +0000 (15:48 +1030)]
missing changelog for last patch
Alan Modra [Mon, 13 Jan 2014 03:21:16 +0000 (13:51 +1030)]
Error on shared lib call to @local ifunc
On powerpc32, making ifuncs have non-default visibility in shared
libraries or pies can result in runtime failures. The problem is that
if gcc is told that a given function has non-default visibility, then
calls to that function are assumed to be local (which is true) and
thus need not go via a plt call stub (which is false for ifunc). If
the caller has no other reason to set up the got pointer (r30), code
won't be emitted to do so. However, a pic plt call stub makes use of
r30 to load the plt entry. So a call to an ifunc, which always needs
a plt entry, will fail.
This patch makes ld emit an error for the problem case, and allows
calls to non-default visibility ifuncs to work in normal executables.
I also fix some cases where ifuncs fail when using the old bss-plt.
* elf32-ppc.c (ppc_elf_check_relocs): For @local call to ifunc,
error when shared and force a plt call otherwise.
(ppc_elf_size_dynamic_sections): Don't emit DT_PPC_GOT unless
plt_type == PLT_NEW.
(ppc_elf_relocate_section): Add missing test to resolve ifuncs to
the appropriate call stub.
Alan Modra [Sun, 12 Jan 2014 23:00:37 +0000 (09:30 +1030)]
daily update
Sergio Durigan Junior [Sun, 12 Jan 2014 03:32:26 +0000 (01:32 -0200)]
Split i386_stap_parse_special_token into smaller functions
This patch reorganizes code on gdb/i386-tdep.c's SystemTap SDT probe
support functions. Before it, the code to parse special operands on x86
lived in a single, big function. This patch creates 2 new functions
that makes the code more organized and removes a few indentation levels
(which is always good IMO).
I haven't modified anything logical in the functions, i.e., there's still
one latent bug on i386_stap_parse_special_token_triplet now. I will soon
post a patch to fix this, and to also improve the readability of the two
new functions.
2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
* i386-tdep.c (i386_stap_parse_special_token_triplet): New
function, with code from i386_stap_parse_special_token.
(i386_stap_parse_special_token_three_arg_disp): Likewise.
(i386_stap_parse_special_token): Move code to the two functions
above; simplify it.
Alan Modra [Sat, 11 Jan 2014 23:00:39 +0000 (09:30 +1030)]
daily update
Alan Modra [Fri, 10 Jan 2014 23:00:57 +0000 (09:30 +1030)]
daily update
Pedro Alves [Fri, 10 Jan 2014 15:46:59 +0000 (15:46 +0000)]
[doc] Mention that "set environment" affects the shell too.
gdb/doc/
2014-01-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Your Program's Environment) <set environment>:
Mention the shell, and point at 'set exec-wrapper'.
Andreas Arnez [Fri, 10 Jan 2014 15:37:36 +0000 (15:37 +0000)]
Since upstream gcc has recently increased the function alignment on
S390, the dw2-dir-file-name test case fails in the first
gdb_continue_to_breakpoint. Indeed, the breakpoint is now placed into
the alignment gap *before* the actual function.
This happens because the test case declares the respective "*_start"
symbol as a "loose" label before the function definition, and the
compiler inserts the alignment between that label and the function
itself.
The "*_start" symbols were only necessary because FUNC made the
function static. The fix makes the functions extern instead, thus
making the "*_start" labels unnecessary.
testsuite/
2014-01-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
Make "name" extern.
* gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
references to ${name}_start by references to ${name}.
Alan Modra [Fri, 10 Jan 2014 10:41:46 +0000 (21:11 +1030)]
Don't adjust LOAD segment to match GNU_RELRO segment
Instead, fix Jakub's original code setting up the PR_GNU_RELRO header
from the PT_LOAD header.
PR ld/14207
PR ld/16322
PR binutils/16323
bfd/
* elf.c (assign_file_positions_for_load_sections): Revert last change.
(assign_file_positions_for_non_load_sections): When setting up
PT_GNU_RELRO header, don't require a corresponding PT_LOAD
header that completely covers the relro region.
ld/
* ldlang.c (lang_size_sections): Remove unneeded RELRO base
adjust. Tidy comments.
* ld.texinfo (DATA_SEGMENT_RELRO_END): Correct description.
ld/testsuite/
* ld-x86-64/pr14207.d: Adjust
Joel Brobecker [Fri, 10 Jan 2014 03:54:23 +0000 (07:54 +0400)]
Remove path from gdb.ada/pp-rec-component.exp "source" test
gdb/testsuite/ChangeLog:
* gdb.ada/pp-rec-component.exp: Remove path from "source" test.
Joel Brobecker [Fri, 10 Jan 2014 03:50:29 +0000 (07:50 +0400)]
Remove path from gdb.python/py-pp-integral.exp "source" test.
gdb/testsuite/ChangeLog:
* gdb.python/py-pp-integral.exp: Remove path from "source" test.
Hans-Peter Nilsson [Fri, 10 Jan 2014 00:25:26 +0000 (01:25 +0100)]
* emulparams/crislinux.sh (COMMONPAGESIZE): Define.
Alan Modra [Thu, 9 Jan 2014 23:00:39 +0000 (09:30 +1030)]
daily update
Pedro Alves [Thu, 9 Jan 2014 19:57:13 +0000 (19:57 +0000)]
gdb.mi/mi-info-os.exp: Fix cross-debugger testing
A live target is required for `-info-os' to work in non-native
configurations.
(gdb)
Expecting: ^(-info-os[
]+)?(.*\^done,OSDataTable=.*[
]+[(]gdb[)]
[ ]*)
-info-os
^error,msg="Don't know how to get OS data. Try \"help target\"."
(gdb)
FAIL: gdb.mi/mi-info-os.exp: -info-os
If GDB does have a native configuration included, but we're testing
remote, it'll be worse, as if we're not connected yet, -info-os will
run against the default run target, and pass, falsely giving the
impression the remote bits were exercised.
gdb/testsuite/
2014-01-09 Maciej W. Rozycki <macro@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.mi/mi-info-os.exp: Connect to the target with
mi_gdb_target_load.
Roland McGrath [Thu, 9 Jan 2014 18:13:10 +0000 (10:13 -0800)]
Fix buffer underrun in i386-dis.c.
opcodes/
* i386-dis.c (print_insn): Do not touch all_prefixes[-1] when
last_rex_prefix is -1.
Pedro Alves [Thu, 9 Jan 2014 18:33:45 +0000 (18:33 +0000)]
Handle the case of a remote target supporting target side commands, but not on software breakpoints.
Although we can tell upfront whether a remote target supports target
side commands, we can only tell whether the target supports that in
combination with a given breakpoint kind (software, hardware,
watchpoints, etc.) when we go and try to insert such a breakpoint kind
the first time. It's not desirable to make remote_insert_breakpoint
simply return -1 in this case, because if the breakpoint was set in a
shared library, insert_bp_location will assume that the breakpoint
insertion failed because the library wasn't mapped in.
insert_bp_location already handles errors/exceptions thrown from the
target_insert_xxx methods, exactly so the backend can tell the user
the detailed reason the insertion of hw breakpoints failed. But, in
the case of software breakpoints, it discards the detailed error
message.
So the patch makes insert_bp_location use the error's message for SW
breakpoints too, and, introduces a NOT_SUPPORTED_ERROR error code so
that insert_bp_location doesn't confuse the error for failure due to a
shared library disappearing.
The result is:
(gdb) c
Warning:
Cannot insert breakpoint 2: Target doesn't support breakpoints that have target side commands.
2014-01-09 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
PR gdb/16101
* breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
bp_err_string. Don't mark the location shlib_disabled if the
error thrown wasn't a generic or memory error. Catch errors
thrown while inserting breakpoints in overlayed code. Output
error message of software breakpoints.
* remote.c (remote_insert_breakpoint): If this breakpoint has
target-side commands but this stub doesn't support Z0 packets,
throw NOT_SUPPORTED_ERROR error.
* exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
* target.h (target_insert_breakpoint): Extend comment.
(target_insert_hw_breakpoint): Add comment.
H.J. Lu [Thu, 9 Jan 2014 18:23:03 +0000 (10:23 -0800)]
Fix copyright year
H.J. Lu [Thu, 9 Jan 2014 18:18:19 +0000 (10:18 -0800)]
Check if GNU_RELRO segment is is generated
Fail if GNU_RELRO segment isn't generated, but should.
* ld-elf/binutils.exp (binutils_test): Check if GNU_RELRO segment
is generated.
Tom Tromey [Thu, 9 Jan 2014 17:16:18 +0000 (10:16 -0700)]
remove include/gdbm.h
include/gdbm.h is a relic.
2014-01-09 Tom Tromey <tromey@redhat.com>
* gdbm.h: Remove.
H.J. Lu [Thu, 9 Jan 2014 17:01:53 +0000 (09:01 -0800)]
Add and use check_lto_shared_available
2014-01-09 Vidya Praveen <vidyapraveen@arm.com>
* lib/ld-lib.exp (check_lto_shared_available): New check.
* ld-plugin/lto.exp: Use check_lto_shared_available.
Tristan Gingold [Fri, 6 Dec 2013 16:00:02 +0000 (17:00 +0100)]
Use table jump macros in coff-rs6000 targets.
bfd/
2014-01-09 Tristan Gingold <gingold@adacore.com>
* coff-rs6000.c (rs6000coff_vec, pmac_xcoff_vec): use jump
table macros and add macros to initializa the structure.
Alan Modra [Wed, 8 Jan 2014 23:00:37 +0000 (09:30 +1030)]
daily update
Pedro Alves [Wed, 8 Jan 2014 19:16:54 +0000 (19:16 +0000)]
GDBserver: Discard previous queued events when GDB disconnects.
... not when a new GDB connection sends the status packet ('?').
Mainly just a cleanup/simplification, as GDB always sends '?' first.
Tested on x86_64 Fedora 17.
2014-01-08 Pedro Alves <palves@redhat.com>
* server.c (handle_status): Don't discard previous queued stop
replies or thread's pending status here.
(main) <disconnection>: Do it here instead.
Pedro Alves [Wed, 8 Jan 2014 18:55:51 +0000 (18:55 +0000)]
[remote/gdbserver] Don't lose signals when reconnecting.
Currently, when GDB connects in all-stop mode, GDBserver always
responds to the status packet with a GDB_SIGNAL_TRAP, even if the
program is actually stopped for some other signal.
(gdb) tar rem ...
...
(gdb) c
Program received signal SIGUSR1, User defined signal 1.
(gdb) disconnect
(gdb) tar rem ...
(gdb) c
(Or a GDB crash instead of an explicit disconnect.)
This results in the program losing that signal on that last continue,
because gdb will tell the target to resume with no signal (to suppress
the GDB_SIGNAL_TRAP, due to 'handle SISGTRAP nopass'), and that will
actually suppress the real signal the program had stopped for
(SIGUSR1). To fix that, I think we should make GDBserver report the
real signal the thread had stopped for in response to the status
packet:
@item ?
@cindex @samp{?} packet
Indicate the reason the target halted. The reply is the same as for
step and continue.
But, that raises the question -- which thread are we reporting the
status for? Due to how the RSP in all-stop works, we can only report
one status. The status packet's response is a stop reply packet, so
it includes the thread identifier, so it's not a problem packet-wise.
However, GDBserver is currently always reporting the status for first
thread in the thread list, even though that may well not be the thread
that got the signal that caused the program to stop. So the next
logical step would be to report the status for the
last_ptid/last_status thread (the last event reported to gdb), if it's
still around; and if not, fallback to some other thread.
There's an issue on the GDB side with that, though...
GDB currently always adds the thread reported in response to the
status query as the first thread in its list. That means that if we
start with e.g.,
(gdb) info threads
3 Thread 1003 ...
* 2 Thread 1002 ...
1 Thread 1001 ...
And reconnect:
(gdb) disconnect
(gdb) tar rem ...
We end up with:
(gdb) info threads
3 Thread 1003 ...
2 Thread 1001 ...
* 1 Thread 1002 ...
Not a real big issue, but it's reasonably fixable, by having GDB
fetch/sync the thread list before fetching the status/'?', and then
using the status to select the right thread as current on the GDB
side. Holes in the thread numbers are squashed before/after
reconnection (e.g., 2,3,5 becomes 1,2,3), but the order is preserved,
which I think is both good, and good enough.
However (yes, there's more...), the previous GDB that was connected
might have had gdbserver running in non-stop mode, or could have left
gdbserver doing disconnected tracing (which also forces non-stop), and
if the new gdb/connection is in all-stop mode, we can end up with more
than one thread with a signal to report back to gdb. As we can only
report one thread/status (in the all-stop RSP variant; the non-stop
variant doesn't have this issue), we get to do what we do at every
other place we have this situation -- leave events we can't report
right now as pending, so that the next resume picks them up.
Note all this ammounts to a QoI change, within the existing framework.
There's really no RSP change here.
The only user visible change (other than that the signal is program is
stopped at isn't lost / is passed to the program), is in "info
program", that now can show the signal the program stopped for. Of
course, the next resume will respect the pass/nopass setting for the
signal in question. It'd be reasonable to have the initial connection
tell the user the program was stopped with a signal, similar to when
we load a core to debug, but I'm leaving that out for a future change.
I think we'll need to either change how handle_inferior_event & co
handle stop_soon, or maybe bypass them completely (like
fork-child.c:startup_inferior) for that.
Tested on x86_64 Fedora 17.
gdb/gdbserver/
2014-01-08 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_info) <status_pending_p>: New field.
* server.c (visit_actioned_threads, handle_pending_status): New
function.
(handle_v_cont): Factor out parts to ...
(resume): ... this new function. If in all-stop, and a thread
being resumed has a pending status, report it without actually
resuming.
(myresume): Adjust to use the new 'resume' function.
(clear_pending_status_callback, set_pending_status_callback)
(find_status_pending_thread_callback): New functions.
(handle_status): Handle the case of multiple threads having
interesting statuses to report. Report threads' real last signal
instead of always reporting GDB_SIGNAL_TRAP. Look for a thread
with an interesting thread to report the status for, instead of
always reporting the status of the first thread.
gdb/
2014-01-08 Pedro Alves <palves@redhat.com>
* remote.c (remote_add_thread): Add threads silently if starting
up.
(remote_notice_new_inferior): If in all-stop, and starting up,
don't call notice_new_inferior.
(get_current_thread): New function, factored out from ...
(add_current_inferior_and_thread): ... this. Adjust.
(remote_start_remote) <all-stop>: Fetch the thread list. If we
found any thread, then select the remote's current thread as GDB's
current thread too.
gdb/testsuite/
2014-01-08 Pedro Alves <palves@redhat.com>
* gdb.threads/reconnect-signal.c: New file.
* gdb.threads/reconnect-signal.exp: New file.
H.J. Lu [Wed, 8 Jan 2014 16:22:35 +0000 (08:22 -0800)]
Remove regbnd and vec_disp8
* config/tc-i386.c (regbnd): Removed.
(vec_disp8): Likewise.
H.J. Lu [Thu, 12 Dec 2013 18:35:47 +0000 (10:35 -0800)]
Adjust LOAD segment to generate GNU_RELRO segment
This patch fixes 2 GNU_RELRO segment bugs:
1. lang_size_sections didn't properly align base to the maximum
alignment power of sections between DATA_SEGMENT_ALIGN and
DATA_SEGMENT_RELRO_END.
2. ld failed to adjust LOAD segment to generate GNU_RELRO segment
when LOAD segment doesn't fit GNU_RELRO segment. This is
https://sourceware.org/bugzilla/show_bug.cgi?id=14207
We "fixed" ld by not generating GNU_RELRO segment. This patch
adjusts LOAD segment to generate GNU_RELRO segment. It fixes
PR ld/16322 and at the same time it also fixes PR binutils/16323
since now we can adjust LOAD segment if it is too small.
bfd/
PR ld/14207
PR ld/16322
PR binutils/16323
* elf.c (_bfd_elf_map_sections_to_segments): Don't check section
size for PT_GNU_RELRO segment.
(assign_file_positions_for_load_sections): If PT_LOAD segment
doesn't fit PT_GNU_RELRO segment, adjust its p_filesz and p_memsz.
ld/
PR ld/14207
PR ld/16322
PR binutils/16323
* ldlang.c (lang_size_sections): Properly align RELRO base.
ld/testsuite/
PR ld/14207
PR ld/16322
PR binutils/16323
* ld-elf/pr16322.d: New file.
* ld-elf/pr16322.s: Likewise.
* ld-x86-64/pr14207.d: Expect PT_GNU_RELRO segment.
H.J. Lu [Wed, 8 Jan 2014 13:48:12 +0000 (05:48 -0800)]
Update copyright year to 2014
binutils/
* version.c (print_version): Update copyright year to 2014.
gas/
* as.c (parse_args): Update copyright year to 2014.
gold/
* version.cc (print_version): Update copyright year to 2014.
ld/
* ldver.c (ldversion): Update copyright year to 2014.
opcodes/
* i386-gen.c (process_copyright): Update copyright year to 2014.
H.J. Lu [Wed, 8 Jan 2014 13:32:12 +0000 (05:32 -0800)]
New Year - binutils ChangeLog rotation
Joel Brobecker [Wed, 8 Jan 2014 09:41:03 +0000 (13:41 +0400)]
Update NEWS post GDB 7.7 branch creation.
gdb/ChangeLog:
* NEWS: Create a new section for the next release branch.
Rename the section of the current branch, now that it has
been cut.
Joel Brobecker [Wed, 8 Jan 2014 09:25:28 +0000 (13:25 +0400)]
Bump version to 7.7.50.DATE-cvs.
Now that the GDB 7.7 branch has been created, we can
bump the version number.
gdb/ChangeLog:
GDB 7.7 branch created (
79301218fa0f074c5656db0ec8972a5ddcf91fb5):
* version.in: Bump version to 7.7.50.DATE-cvs.
Joel Brobecker [Wed, 8 Jan 2014 09:16:32 +0000 (13:16 +0400)]
Add missing ChangeLog entries.
Yao Qi [Tue, 7 Jan 2014 10:12:21 +0000 (18:12 +0800)]
Fix pointer assignment with different signedness
This patch fixes these errors below:
../../binutils-gdb/gdb/spu-linux-nat.c: In function ‘spu_symbol_file_add_from_memory’:
../../binutils-gdb/gdb/spu-linux-nat.c:368:3: error: pointer targets in passing argument 2 of ‘spu_proc_xfer_spu’ differ in signedness [-Werror=pointer-sign]
../../binutils-gdb/gdb/spu-linux-nat.c:232:1: note: expected ‘gdb_byte *’ but argument is of type ‘char *’
../../binutils-gdb/gdb/spu-linux-nat.c: In function ‘spu_xfer_partial’:
../../binutils-gdb/gdb/spu-linux-nat.c:598:7: error: pointer targets in passing argument 1 of ‘strtoulst’ differ in signedness [-Werror=pointer-sign]
In file included from ../../binutils-gdb/gdb/defs.h:769:0,
from ../../binutils-gdb/gdb/spu-linux-nat.c:21:
../../binutils-gdb/gdb/utils.h:43:15: note: expected ‘const char *’ but argument is of type ‘gdb_byte *’
gdb:
2014-01-08 Yao Qi <yao@codesourcery.com>
* spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
(spu_xfer_partial): Cast 'buf' to 'const char *'.
Yao Qi [Tue, 7 Jan 2014 09:48:07 +0000 (17:48 +0800)]
Pass name to symbol_file_add_from_bfd
This patch fixes the following build error:
../../binutils-gdb/gdb/spu-linux-nat.c:383:5: error: passing argument 2 of ‘symbol_file_add_from_bfd’ makes pointer from integer without a cast [-Werror]
In file included from ../../binutils-gdb/gdb/spu-linux-nat.c:29:0:
../../binutils-gdb/gdb/symfile.h:444:24: note: expected ‘const char *’ but argument is of type ‘int’
../../binutils-gdb/gdb/spu-linux-nat.c:383:5: error: passing argument 3 of ‘symbol_file_add_from_bfd’ makes integer from pointer without a cast [-Werror]
In file included from ../../binutils-gdb/gdb/spu-linux-nat.c:29:0:
../../binutils-gdb/gdb/symfile.h:444:24: note: expected ‘int’ but argument is of type ‘void *’
../../binutils-gdb/gdb/spu-linux-nat.c:383:5: error: passing argument 5 of ‘symbol_file_add_from_bfd’ makes integer from pointer without a cast [-Werror]
In file included from ../../binutils-gdb/gdb/spu-linux-nat.c:29:0:
../../binutils-gdb/gdb/symfile.h:444:24: note: expected ‘int’ but argument is of type ‘void *’
../../binutils-gdb/gdb/spu-linux-nat.c:383:5: error: too few arguments to function ‘symbol_file_add_from_bfd’
Argument 'name' was added to function symbol_file_add_from_bfd by this patch
[patchv4 4/5] Keep objfile original filename
https://sourceware.org/ml/gdb-patches/2013-09/msg00683.html
but caller of symbol_file_add_from_bfd in spu-linux-nat.c wasn't updated.
This patch fixes the build error.
gdb:
2014-01-08 Yao Qi <yao@codesourcery.com>
* spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
return value of bfd_get_filename to symbol_file_add_from_bfd.
Pierre Muller [Tue, 7 Jan 2014 23:31:50 +0000 (00:31 +0100)]
Fix PR16201.
* coff-pe-read.c (struct read_pe_section_data): Add index field.
(add_pe_exported_sym): Use SECTION_DATA->INDEX for call
to prim_record_mininal_symbol_and_info.
(add_pe_forwarded_sym): Use known section number of forwarded symbol
in call to prim_record_minimal_symbol_and_info.
(read_pe_exported_syms): Set index field of section_data.
Alan Modra [Tue, 7 Jan 2014 23:00:55 +0000 (09:30 +1030)]
daily update
Andrew Pinski [Wed, 18 Dec 2013 19:03:07 +0000 (11:03 -0800)]
AARCH64: Change cpsr type to be 64bit.
2013-12-18 Andrew Pinski <apinski@cavium.com>
* features/aarch64-core.xml (cpsr): Change to be 64bit.
* features/aarch64.c: Regenerate.
Andreas Schwab [Tue, 7 Jan 2014 20:28:53 +0000 (21:28 +0100)]
Use correct default for target functions that return pointer
* target.c (return_null): Define.
(update_current_target): Use it instead of return_zero for
functions that return a pointer.
Edjunior Barbosa Machado [Tue, 7 Jan 2014 19:03:06 +0000 (17:03 -0200)]
Fix dir command for duplicated paths and add a new testcase.
gdb/ChangeLog:
2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* source.c (add_path): Fix check for duplicated paths in the previously
included paths.
gdb/testsuite/ChangeLog:
2014-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/source-dir.exp: New file.
Tom Tromey [Sun, 5 Jan 2014 04:46:15 +0000 (21:46 -0700)]
remove VA_* macros from sim
Remove the obsolete VA_* macros from sim.
2014-01-06 Tom Tromey <tromey@redhat.com>
* common/cgen-trace.c: Don't use old VA_* macros.
* common/sim-load.c (xprintf): Likewise.
* common/sim-trace.c (trace_printf, debug_printf): Likewise.
Tom Tromey [Sun, 5 Jan 2014 04:43:21 +0000 (21:43 -0700)]
remove PARAMS from sim
This removes the last uses of PARAMS from sim.
2014-01-06 Tom Tromey <tromey@redhat.com>
* README-HACKING: Don't use PARAMS.
* arm/wrapper.c: Don't use PARAMS.
* bfin/sim-main.h: Don't use PARAMS.
* common/callback.c: Don't use PARAMS.
* common/cgen-trace.c: Don't use PARAMS.
* common/run-sim.h: Don't use PARAMS.
* common/run.c: Don't use PARAMS.
* common/sim-base.h: Don't use PARAMS.
* common/sim-load.c: Don't use PARAMS.
* common/sim-options.h: Don't use PARAMS.
* common/sim-trace.c: Don't use PARAMS.
* common/sim-trace.h: Don't use PARAMS.
* common/sim-utils.h: Don't use PARAMS.
* cr16/cr16_sim.h: Don't use PARAMS.
* cr16/gencode.c: Don't use PARAMS.
* cr16/interp.c: Don't use PARAMS.
* cr16/simops.c: Don't use PARAMS.
* d10v/d10v_sim.h: Don't use PARAMS.
* d10v/gencode.c: Don't use PARAMS.
* d10v/interp.c: Don't use PARAMS.
* d10v/simops.c: Don't use PARAMS.
* erc32/erc32.c: Don't use PARAMS.
* erc32/exec.c: Don't use PARAMS.
* erc32/float.c: Don't use PARAMS.
* erc32/func.c: Don't use PARAMS.
* erc32/sis.c: Don't use PARAMS.
* erc32/sis.h: Don't use PARAMS.
* mips/interp.c: Don't use PARAMS.
* mips/sim-main.h: Don't use PARAMS.
* sh/interp.c: Don't use PARAMS.
* v850/sim-main.h: Don't use PARAMS.
* v850/v850_sim.h: Don't use PARAMS.
Tom Tromey [Mon, 6 Jan 2014 02:41:32 +0000 (19:41 -0700)]
remove PARAMS from include/cgen
This removes the remaining uses of PARAMS from include/cgen.
Tested by rebuilding; a file in opcodes includes this header.
2014-01-06 Tom Tromey <tromey@redhat.com>
* bitset.h: Remove uses of PARAMS.
Tom Tromey [Sun, 5 Jan 2014 04:47:10 +0000 (21:47 -0700)]
remove VA_* from binutils
This removes the last uses of the obsolete VA_* macros from binutils.
All the binutils and bfd changes were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* elf32-xtensa.c (vsprint_msg): Don't use old VA_* compatibility
wrappers.
2014-01-07 Tom Tromey <tromey@redhat.com>
* bucomm.c (fatal, non_fatal): Replace obsolete VA_* macros with
stdarg macros.
* dlltool.c (inform): Replace obsolete VA_* macros with stdarg
macros.
* dllwrap.c (inform, warn): Replace obsolete VA_* macros with
stdarg macros.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-tic30.c (debug): Avoid old VA_* compatibility
wrappers.
Tom Tromey [Mon, 6 Jan 2014 02:49:29 +0000 (19:49 -0700)]
remove uses of PARAMS from binutils
This removes the last uses of PARAMS from binutils.
The two changes in binutils were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* coffgrok.h (coff_ofile): Don't use PARAMS.
* nlmheader.y (strerror): Don't use PARAMS.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
use PARAMS.
Tom Tromey [Mon, 23 Dec 2013 17:11:10 +0000 (10:11 -0700)]
remove ANSI_PROTOTYPES
This removes the last use of ANSI_PROTOTYPES in the tree.
It appears in gas.
I didn't even rebuild this but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
Honggyu Kim [Tue, 7 Jan 2014 03:25:10 +0000 (01:25 -0200)]
Remove duplicated #include's from GDB
This patch simply removes duplicated #include statements in the gdb/
directory. If there are two duplicated #include statements, this patch
keeps the first #include and removes the second.
Those duplicates have been found by using the checkincludes.pl tool from
the Linux kernel and double checked manually once again if the #include
statements are affected by #ifdef macros.
2014-01-06 Honggyu Kim <hong.gyu.kim@lge.com>
* ada-lang.c: Remove duplicated include statements.
* alphabsd-nat.c: Ditto.
* amd64-darwin-tdep.c: Ditto.
* amd64fbsd-nat.c: Ditto.
* auto-load.c: Ditto.
* ax-gdb.c: Ditto.
* breakpoint.c: Ditto.
* dbxread.c: Ditto.
* fork-child.c: Ditto.
* gdb_usleep.c: Ditto.
* i386-darwin-tdep.c: Ditto.
* i386fbsd-nat.c: Ditto.
* infcmd.c: Ditto.
* inferior.c: Ditto.
* jv-lang.c: Ditto.
* linux-nat.c: Ditto.
* linux-tdep.c: Ditto.
* m68kbsd-nat.c: Ditto.
* m68klinux-nat.c: Ditto.
* microblaze-tdep.c: Ditto.
* mips-linux-tdep.c: Ditto.
* mn10300-tdep.c: Ditto.
* nto-tdep.c: Ditto.
* opencl-lang.c: Ditto.
* osdata.c: Ditto.
* printcmd.c: Ditto.
* regcache.c: Ditto.
* remote-m32r-sdi.c: Ditto.
* remote.c: Ditto.
* symfile.c: Ditto.
* symtab.c: Ditto.
* tilegx-linux-nat.c: Ditto.
* tilegx-tdep.c: Ditto.
* tracepoint.c: Ditto.
* valops.c: Ditto.
* vaxbsd-nat.c: Ditto.
* windows-nat.c: Ditto.
* xtensa-tdep.c: Ditto.
Yao Qi [Tue, 7 Jan 2014 09:28:48 +0000 (17:28 +0800)]
Fix missing-prototypes error for '_initialize_spu_nat'
This patch fixes this build error below:
../../binutils-gdb/gdb/spu-linux-nat.c:616:1: error: no previous prototype for ‘_initialize_spu_nat’ [-Werror=missing-prototypes]
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* spu-linux-nat.c (_initialize_spu_nat): Declare.
Philipp Tomsich [Wed, 4 Dec 2013 18:29:25 +0000 (19:29 +0100)]
[AArch64] Add GAS recognition for "xgene-1"
* config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
This adds support for the AppliedMicro X-Gene 1 processor to the
assembler.
Yao Qi [Sat, 4 Jan 2014 07:48:21 +0000 (15:48 +0800)]
Cast to uintptr_t when calling ptrace32 on aix
When I verify my changes to target.h doesn't break build on aix, I get
the following build error on a clean GDB checkout.
../../binutils-gdb/gdb/aix-thread.c: In function 'pdc_read_regs':
../../binutils-gdb/gdb/aix-thread.c:366:4: error: passing argument 3 of 'ptrace32' makes integer from pointer without a cast [-Werror]
if (!ptrace32 (PTT_READ_GPRS, tid, gprs32, 0, NULL))
^
../../binutils-gdb/gdb/aix-thread.c:263:1: note: expected 'long long int' but argument is of type 'uint32_t *'
ptrace32 (int req, int id, addr_ptr addr, int data, int *buf)
^
../../binutils-gdb/gdb/aix-thread.c:375:42: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
if (!ptrace32 (PTT_READ_FPRS, tid, (addr_ptr) fprs, 0, NULL))
^
../../binutils-gdb/gdb/aix-thread.c:392:39: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
if (!ptrace32 (PTT_READ_SPRS, tid, (addr_ptr) &sprs32, 0, NULL))
GCC uses -maix32 in default, so the 'long long' is 64 bit and address
is 32 bit. Such warnings should go away if -maix64 is used.
In this patch, I cast the parameter to uintptr_t first, and then cast
to addr_ptr.
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
Joel Brobecker <brobecker@adacore.com>
* aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
(pdc_write_regs): Likewise.
(fetch_regs_kernel_thread): Likewise.
(store_regs_kernel_thread): Likewise.
Joel Brobecker [Sat, 4 Jan 2014 02:31:11 +0000 (06:31 +0400)]
varobj/Ada: Missing children for interface-wide tagged types
Consider the following code:
type Element is abstract tagged null record;
type GADataType is interface;
type Data_Type is new Element and GADataType with record
I : Integer := 42;
end record;
Result1 : Data_Type;
GGG1 : GADataType'Class := GADataType'Class (Result1);
When trying to create a varobj for variable ggg1, GDB currently
returns an object which has no child:
-var-create ggg1 * ggg1
^done,name="ggg1",numchild="0",[...]
This is incorrect, it should return an object which has one child
(field "i"). This is because tagged-type objects are dynamic, and
we need to apply a small transformation in order to get their actual
type. This is already done on the GDB/CLI side in ada-valprint,
and it needs to be done on the ada-varobj side as well.
gdb/ChangeLog:
* ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
tagged type objects to their actual type.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_interface: New testcase.
Joel Brobecker [Thu, 19 Dec 2013 17:26:55 +0000 (21:26 +0400)]
Ada: Fix missing call to pretty-printer for fields of records.
Consider the following types:
type Time_T is record
Secs : Integer;
end record;
Before : Time_T := (Secs =>
1384395743);
In this example, we assume that type Time_T is the number of seconds
since Epoch, and so added a Python pretty-printer, to print this
type in a more human-friendly way. For instance:
(gdb) print before
$1 = Thu Nov 14 02:22:23 2013 (
1384395743)
However, we've noticed that things stop working when this type is
embedded inside another record, and we try to print that record.
For instance, with the following declarations:
type Composite is record
Id : Integer;
T : Time_T;
end record;
Afternoon : Composite := (Id => 1, T => (Secs =>
1384395865));
(gdb) print afternoon
$2 = (id => 1, t => (secs =>
1384395865))
We expected instead:
(gdb) print afternoon
$2 = (id => 1, t => Thu Nov 14 02:24:25 2013 (
1384395865))
This patch fixes the problem by making sure that we try to print
each field via a call to val_print, rather than calling ada_val_print
directly. We need to go through val_print, as the val_print
handles all language-independent features such as calling the
pretty-printer, knowing that ada_val_print will get called eventually
if actual Ada-specific printing is required (which should be the
most common scenario).
And because val_print takes the language as parameter, we enhanced
the print_field_values and print_variant_part to also take a language.
As a bonus, this allows us to remove a couple of references to
current_language.
gdb/ChangeLog:
* ada-valprint.c (print_field_values): Add "language" parameter.
Update calls to print_field_values and print_variant_part.
Pass new parameter "language" in call to val_print instead
of "current_language". Replace call to ada_val_print by call
to val_print.
(print_variant_part): Add "language" parameter.
(ada_val_print_struct_union): Update call to print_field_values.
gdb/testsuite/ChangeLog:
* gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py,
gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb,
gdb.ada/pp-rec-component/pck.ads: New files.
Joel Brobecker [Thu, 19 Dec 2013 16:19:45 +0000 (20:19 +0400)]
ada_print_floating: Remove use of statically sized buffer.
ada_print_floating declares a char buffer with a size that we're hoping
to always be large enough to hold any string representation of a float
value. But that's not really necessary, and also forces us to create
a small wrapper (ui_memcpy) to perform the extraction from a temporary
stream into this buffer. This patches fixes both issues by relying on
ui_file_xstrdup. This forces us to make a few adjustments that are
minor in nature, as we now need to defer the cleanup to the end of
the function.
gdb/ChangeLog:
* ada-valprint.c (ui_memcpy): Delete.
(ada_print_floating): Update documentation. Add empty line
between between function documentation and implementation.
Delete variable "buffer". Use ui_file_xstrdup in place of
ui_file_put. Minor adjustments following this change.
Joel Brobecker [Thu, 19 Dec 2013 16:06:46 +0000 (20:06 +0400)]
Extract string-printing out of ada_val_print_array
This patch creates a new function called "ada_val_print_string"
whose code is directly extracted out of ada_val_print_array.
The extracted code is then replaced by a call to this new function,
followed by a "return". The return avoids the need for an "else"
branch, with the associated block nesting. The latter is not really
terrible in this case, but it seems more readable this way.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_string): New function,
extracted from ada_val_print_array.
(ada_val_print_array): Replace extracted code by call
to ada_val_print_string followed by a return. Move
"else" branch to the function's top block.
Joel Brobecker [Thu, 19 Dec 2013 15:43:57 +0000 (19:43 +0400)]
move ada_val_print_array down within other ada_val_print* functions
This patch moves ada_val_print_array to group it with the other
ada_val_print_* function which are being called by ada_val_print_1.
Since this function is in the same situation, it is more logical
to move it within that group.
It also rationalizes the function's prototype to match the prototype
of the other ada_val_print_* routines.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_array): Move implementation
down. Rename parameter "offset" and "val" into "offset_aligned"
and "original_value" respectively. Add parameter "offset".
Joel Brobecker [Thu, 19 Dec 2013 15:26:27 +0000 (19:26 +0400)]
rewrite ada_val_print_ref to reduce if/else block nesting depth
The logic as currently implemented in this function was a little
difficult to follow, due to the nested of if/else conditions,
but most of the time, the "else" block was very simple. So this
patch re-organizes the code to use fewer levels of nesting by
using return statements, and writing the code as a sequence of
"if something simple, then handle it and return" blocks.
While touching this code, this patch changes the cryptic "???"
printed when trying to print a reference pointing to an undefined
type. This should only ever happen if the debugging information
was corrupted or improperly read. But in case that happens, we now
print "<ref to undefined type>" instead. This is more in line
with how we print other conditions such as optimized out pieces,
or synthetic pointers.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_ref): Rewrite by mostly
re-organizing the code. Change the "???" message printed
when target type is a TYPE_CODE_UNDEF into
"<ref to undefined type>".
Joel Brobecker [Thu, 19 Dec 2013 15:11:49 +0000 (19:11 +0400)]
ada-valprint.c: Inline print_record inside ada_val_print_struct_union
The function print_record is a fairly small and straightforward
function which is only called from one location. So this patch
inlines the code at the point of call.
One small advantage is that the context of use of this patch has
now become such that we can assume that TYPE is not a typedef,
nor an enum. So thhe call to ada_check_typedef is unnecessary,
and this patch removes it.
gdb/ChangeLog:
* ada-valprint.c (print_record): Delete, implementation inlined...
(ada_val_print_struct_union): ... here. Remove call to
ada_check_typedef in inlined implementation.
Joel Brobecker [Thu, 19 Dec 2013 12:30:43 +0000 (16:30 +0400)]
Split ada_val_print_1 into smaller functions
The idea of this patch is that it's hard to have a global view of
ada_val_print_1 because its body spans over too many lines. Also,
each individual "case" block within the giant "switch" can be hard
to isolate if spanning over multiple pages as well.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_gnat_array): New function,
extracted from ada_val_print_1;
(ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
(ada_val_print_flt, ada_val_print_struct_union)
(ada_val_print_ref): Likewise.
(ada_val_print_1): Delete variables i and elttype.
Replace extracted-out code by call to corresponding
new functions.
Joel Brobecker [Thu, 19 Dec 2013 11:48:39 +0000 (15:48 +0400)]
Remove call to gdb_flush at end of ada_val_print_1
I am not sure why this function was called in the first place, but
it disrupts the printing flow when in GDB/MI mode, ending the current
console stream output, and starting a new one. It's not clear whether,
with the code as currently written, the problem is actually visible
or only latent. But, it becomes visible when we replace one of the
"return" statements in the "switch" block just above by a "break"
statement (this is something I'd like to do, and what made me realize
the problem). With the gdb_flush call (after having replaced the
"return" statement as explained above), we get:
% gdb -q -i=mi ada_prg
(gdb)
print 1
&"print 1\n"
!! -> ~"$1 = 1"
!! -> ~"\n"
^done
With the gdb_flush call removed, we now get the entire output into
a single stream.
(gdb)
print 1
&"print 1\n"
~"$1 = 1"
~"\n"
^done
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
Joel Brobecker [Thu, 19 Dec 2013 11:27:00 +0000 (15:27 +0400)]
ada_val_print_1: Go through val_print instead of recursive call to self.
This is to standardize a little bit how printing is done, and in
particular make sure that everyone goes through val_print when
printing sub-objects. This helps making sure that standard features
handled by val_print get activated when expected.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_1): Replace calls to
ada_val_print_1 by calls to val_print.
Joel Brobecker [Thu, 19 Dec 2013 10:33:20 +0000 (14:33 +0400)]
ada_val_print_1: Add language parameter
This is to help calling val_print. We would like to be more systematic
in calling val_print when printing, because it allows us to make sure
we take advantage of the standard features such as pretty-printing
which are handled by val_print.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_1): Add parameter "language".
Update calls to self accordingly. Replace calls to c_val_print
by calls to val_print.
Joel Brobecker [Thu, 19 Dec 2013 10:05:16 +0000 (14:05 +0400)]
ada-valprint.c: Reorder functions to reduce advance declarations.
Advance function declarations add to the maintenance cost, since
any update to the function prototype needs to be made twice.
For static functions, this is not necessary, and this patch
reorders the function so as to reduce the use of such advanche
declarations.
gdb/ChangeLog:
* ada-valprint.c (print_record): Delete declaration.
(adjust_type_signedness, ada_val_print_1): Likewise.
(ada_val_print): Move function implementation down.
(print_variant_part, print_field_values, print_record):
Move function implementation up.
Joel Brobecker [Mon, 23 Dec 2013 03:18:51 +0000 (07:18 +0400)]
[python] Add gdb.Type.name attribute.
Consider the following declarations:
typedef long our_time_t;
our_time_t current_time =
1384395743;
The purpose of this patch is to allow the use of a pretty-printer
for variables of type our_time_t. Normally, pretty-printing sniffers
use the tag name in order to determine which, if any, pretty-printer
should be used. But in the case above, the tag name is not set, since
it does not apply to integral types.
This patch extends the gdb.Type list of attributes to also include
the name of the type, thus allowing the sniffer to match against
that name. With that change, I was able to write a pretty-printer
which displays our variable as follow:
(gdb) print current_time
$1 = Thu Nov 14 02:22:23 2013 (
1384395743)
gdb/ChangeLog:
* python/py-type.c (typy_get_name): New function.
(type_object_getset): Add entry for attribute "name".
* NEWS: Add entry mentioning this new attribute.
gdb/doc/ChangeLog:
* gdb.texinfo (Types In Python): Document new attribute Types.name.
gdb/testsuite:
* gdb.python/py-pp-integral.c: New file.
* gdb.python/py-pp-integral.py: New file.
* gdb.python/py-pp-integral.exp: New file.
Tested on x86_64-linux.
Yao Qi [Sun, 5 Jan 2014 11:32:51 +0000 (19:32 +0800)]
Remove an empty-body 'if' statement
This patch removes the if statement and the comments together.
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
statement.
Yao Qi [Sun, 5 Jan 2014 11:36:51 +0000 (19:36 +0800)]
Add qualifier 'const' to argument args
This patch fixes the following error.
../../../git/gdb/gnu-nat.c: In function 'info_port_rights':
../../../git/gdb/gnu-nat.c:3083:11: error: passing argument 1 of 'parse_to_comma_and_eval' from incompatible pointer type [-Werror]
In file included from ../../../git/gdb/breakpoint.h:23:0,
from ../../../git/gdb/inferior.h:37,
from ../../../git/gdb/gnu-nat.c:55:
../../../git/gdb/value.h:763:22: note: expected 'const char **' but argument is of type 'char **'
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (info_port_rights): Add qualifier const to
argument args.
Yao Qi [Sun, 5 Jan 2014 11:37:53 +0000 (19:37 +0800)]
Use void for empty argument list in trace_me
This patch fixes the following error:
../../../git/gdb/gnu-nat.c: In function 'trace_me':
../../../git/gdb/gnu-nat.c:2106:8: error: old-style function definition [-Werror=old-style-definition]
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (trace_me): Use 'void' for empty argument list.
Yao Qi [Sun, 5 Jan 2014 11:36:03 +0000 (19:36 +0800)]
Make functions static.
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (make_inf) Update declaration.
(make_inf): Make it static.
(inf_set_traced): Likewise.
(inf_port_to_thread, inf_task_died_status): Likewise.
Yao Qi [Sun, 5 Jan 2014 07:38:44 +0000 (15:38 +0800)]
Remove declaration of inf_tid_to_proc
inf_tid_to_proc is not defined at all. This patch is to remove its
declaration.
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (inf_tid_to_proc): Remove declaration.
Yao Qi [Sun, 5 Jan 2014 07:05:44 +0000 (15:05 +0800)]
Fix no previous prototype for '_initialize_gnu_nat' [-Werror=missing-prototypes]
This patch fixes this error below by declaring _initialize_gnu_nat.
../../../git/gdb/gnu-nat.c:3447:1: error: no previous prototype for '_initialize_gnu_nat' [-Werror=missing-prototypes]
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (_initialize_gnu_nat): Declare.
Yao Qi [Thu, 2 Jan 2014 03:02:56 +0000 (11:02 +0800)]
Use enum bfd_endian in gdbarch.sh
This patch changes the return type of gdbarch_byte_order and
gdbarch_byte_order_for_code, from 'int' to 'enum bfd_endian'.
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gdbarch.sh (byte_order, byte_order_for_code): Change type to
'enum bfd_endian'.
(struct gdbarch_info) <byte_order>: Change type to
'enum bfd_endian'.
<byte_order_for_code>: Likewise.
* gdbarch.c, gdbarch.h: Regenerated.
Alan Modra [Mon, 6 Jan 2014 23:00:48 +0000 (09:30 +1030)]
daily update
Tom Tromey [Mon, 6 Jan 2014 21:57:59 +0000 (14:57 -0700)]
fix JIT reader path creation
2014-01-06 Sasha Smundak <asmundak@google.com>
* jit.c: (jit_reader_load_command): Fix JIT reader path creation.
Tom Tromey [Sun, 29 Dec 2013 09:39:28 +0000 (02:39 -0700)]
convert CONST to const
This removes the last uses of the obsolete CONST macro from the tree.
I'm checking this in. Tested by rebuilding.
2014-01-06 Tom Tromey <tromey@redhat.com>
* doublest.c (convert_doublest_to_floatformat): Use const, not
CONST.
* somread.c (som_symtab_read): Likewise.
Mike Frysinger [Mon, 6 Jan 2014 18:15:31 +0000 (18:15 +0000)]
libiberty: fix --enable-install-libiberty flag [PR 56780]
Commit 199570 fixed the --disable-install-libiberty behavior, but it also
added a bug where the enable path never works because the initial clear
of target_header_dir wasn't deleted. So we end up initializing properly
at the top only to reset it at the end all the time.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@206367
138bc75d-0d04-0410-961f-
82ee72b054a4
Gary Benson [Mon, 6 Jan 2014 14:14:21 +0000 (14:14 +0000)]
libiberty: sync with gcc
libiberty/ 2014-01-06 Gary Benson <gbenson@redhat.com>
* cp-demangle.c (struct d_print_info): New fields
next_saved_scope, copy_templates, next_copy_template and
num_copy_templates.
(d_count_templates): New function.
(d_print_init): New parameter "dc".
Estimate numbers of templates and scopes required.
(d_print_free): Removed function.
(cplus_demangle_print_callback): Allocate stack for
templates and scopes. Removed call to d_print_free.
(d_copy_templates): Removed function.
(d_save_scope): New function.
(d_get_saved_scope): Likewise.
(d_print_comp): Replace state saving/restoring code with
calls to d_save_scope and d_get_saved_scope.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@206362
138bc75d-0d04-0410-961f-
82ee72b054a4
Bill Maddox [Mon, 23 Dec 2013 17:49:47 +0000 (17:49 +0000)]
libiberty: sync with gcc
PR c++/41090
Add -fdeclone-ctor-dtor.
include/
* demangle.h (enum gnu_v3_ctor_kinds):
Added literal gnu_v3_unified_ctor.
(enum gnu_v3_ctor_kinds):
Added literal gnu_v3_unified_dtor.
libiberty/
* cp-demangle.c (cplus_demangle_fill_ctor,cplus_demangle_fill_dtor):
Handle unified ctor/dtor.
(d_ctor_dtor_name): Handle unified ctor/dtor.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@206182
138bc75d-0d04-0410-961f-
82ee72b054a4
Hui Zhu [Mon, 6 Jan 2014 16:28:55 +0000 (00:28 +0800)]
Fix a error of my previous commit.
Hui Zhu [Mon, 6 Jan 2014 16:24:41 +0000 (00:24 +0800)]
Remove gdb_bfd_stash_filename to fix crash with fix of binutils/11983
https://sourceware.org/ml/gdb-patches/2014-01/msg00029.html
https://sourceware.org/ml/gdb-patches/2014-01/msg00053.html
2014-01-07 Hui Zhu <hui@codesourcery.com>
* gdb_bfd.c (gdb_bfd_stash_filename): Removed.
(gdb_bfd_open): Removed gdb_bfd_stash_filename.
(gdb_bfd_fopen): Ditto.
(gdb_bfd_openr): Ditto.
(gdb_bfd_openw): Ditto.
(gdb_bfd_openr_iovec): Ditto.
(gdb_bfd_fdopenr): Ditto.
* gdb_bfd.h (gdb_bfd_stash_filename): Removed.
* solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
with xstrdup.
* solib-darwin.c (darwin_bfd_open): Alloc res->filename
with xstrdup.
* symfile-mem.c (symbol_file_add_from_memory): Removed
gdb_bfd_stash_filename.
Maciej W. Rozycki [Mon, 6 Jan 2014 02:40:48 +0000 (10:40 +0800)]
* nds32-asm.c (parse_operand): Fix out-of-range integer constant.
Alan Modra [Sun, 5 Jan 2014 23:00:37 +0000 (09:30 +1030)]
daily update
Alan Modra [Sat, 4 Jan 2014 23:00:39 +0000 (09:30 +1030)]
daily update
Alan Modra [Fri, 3 Jan 2014 23:00:51 +0000 (09:30 +1030)]
daily update
Doug Evans [Fri, 3 Jan 2014 22:34:45 +0000 (14:34 -0800)]
* nat/linux-waitpid.c (linux_debug): Remove extraneous \n from output.
Nick Clifton [Fri, 3 Jan 2014 14:16:17 +0000 (14:16 +0000)]
PR binutils/16199
* elf.c (vma_page_aligned_bias): Handle a maxpagesize value of
zero.
Alan Modra [Thu, 2 Jan 2014 23:00:40 +0000 (09:30 +1030)]
daily update
Nick Clifton [Thu, 2 Jan 2014 14:55:02 +0000 (14:55 +0000)]
Update name in changelog entry.
Asmwarrior [Thu, 2 Jan 2014 14:30:18 +0000 (14:30 +0000)]
PR binutils/14289
* pef.c (bfd_pef_xlib_read_header): Increase buffer size to 80.
Nick Clifton [Thu, 2 Jan 2014 12:14:37 +0000 (12:14 +0000)]
PR binutils/11983
* archive.c (_bfd_get_elt_at_filepos): Store a copy of the
filename in the bfd's filename field.
* elfcode.h (bfd_from_remote_memory): Likewise.
* ieee.c (ieee_object_p): Likewise.
* mach-o.c (bfd_mach_o_fat_member_init): Likewise.
* oasys.c (oasys_openr_next_archived_file): Likewise.
* vms-lib.c (_bfd_vms_lib_get_module): Likewise.
* opncls.c (bfd_fopen): Likewise.
(bfd_openstreamr): Likewise.
(bfd_openr_iovec): Likewise.
(bfd_openw): Likewise.
(bfd_create): Likewise.
(_bfd_delete_bfd): Free filename.
Alan Modra [Wed, 1 Jan 2014 23:00:37 +0000 (09:30 +1030)]
daily update
Joel Brobecker [Wed, 1 Jan 2014 03:57:03 +0000 (07:57 +0400)]
Add gdb/ChangeLog entry for previous change.
I forgot to add that entry when I checked in the "copyright year range"
update for GDB files.
Joel Brobecker [Wed, 1 Jan 2014 03:54:24 +0000 (07:54 +0400)]
Update Copyright year range in all files maintained by GDB.
Joel Brobecker [Wed, 1 Jan 2014 03:39:44 +0000 (07:39 +0400)]
Update copyright year in gdb/gdbserver/gdbreplay version output.
gdb/ChangeLog:
* top.c (print_gdb_version): Set copyright year to 2014.
gdb/gdbserver/ChangeLog:
* gdbserver.c (gdbserver_version): Set copyright year to 2014.
* gdbreplay.c (gdbreplay_version): Likewise.
Joel Brobecker [Wed, 1 Jan 2014 03:34:22 +0000 (07:34 +0400)]
Add gdb/ChangeLog-2013 entry in fnchange.lst.
Joel Brobecker [Wed, 1 Jan 2014 03:31:51 +0000 (07:31 +0400)]
New Year - GDB ChangeLog rotation.
Alan Modra [Tue, 31 Dec 2013 23:00:40 +0000 (09:30 +1030)]
daily update
Nick Clifton [Tue, 31 Dec 2013 09:52:24 +0000 (09:52 +0000)]
* objcopy.c (dump_sections): New list.
(command_line_switch): Add OPTION_DUMP_SECTION.
(copy_options): Add dump-section.
(copy_usage): Document new option.
(copy_object): Dump requested sections.
(copy_main): Handle --dump-section.
* doc/binutils.texi: Document --dump-section option.
* NEWS: Mention new feature.
This page took 0.048742 seconds and 4 git commands to generate.