Jason Molenda [Sat, 30 Sep 1995 16:38:16 +0000 (16:38 +0000)]
* configure.in: X_INCDIR and X_LIBDIR added.
* Makefile.in: @X_INCDIR@ and @X_LIBDIR@ added.
* configure: Regnerated.
Jason Molenda [Sat, 30 Sep 1995 11:46:31 +0000 (11:46 +0000)]
keep vr4300el.mt
Jason Molenda [Sat, 30 Sep 1995 11:37:55 +0000 (11:37 +0000)]
* configure.in (host i[345]86-*-win32): Expand the
noconfigdirs again.
what you were you thinking sac?
Steve Chamberlain [Sat, 30 Sep 1995 00:44:21 +0000 (00:44 +0000)]
keep common directory.
Steve Chamberlain [Sat, 30 Sep 1995 00:42:24 +0000 (00:42 +0000)]
Fri Sep 29 02:10:05 1995 steve chamberlain <sac@slash.cygnus.com>
* config/arm/tm-arm.h (FRAME_CHAIN, FRAME_CHAIN_VALID):
Any pc > LOWESTPC is ok.
Steve Chamberlain [Sat, 30 Sep 1995 00:06:55 +0000 (00:06 +0000)]
* remote-rdp.c (rdp_init): Take out variable baud rate stuff.
(remote_rdp_detatch): Delete.
* breakpoint.c (ctype.h): Don't include twice.
Ian Lance Taylor [Fri, 29 Sep 1995 22:37:36 +0000 (22:37 +0000)]
* emultempl/sunos.em (gld${EMULATION_NAME}_before_allocation): If
command_line.rpath is set, use it, rather than the -L options, to
build the rules section.
* ld.texinfo: Document this use of -rpath.
Steve Chamberlain [Fri, 29 Sep 1995 22:28:44 +0000 (22:28 +0000)]
Fri Sep 29 15:19:23 1995 steve chamberlain <sac@slash.cygnus.com>
Fixes for when the host WIN32, but not MSC.
* complete.c: Sometimes have pwd.h
* parens.c: WIN32 has similar restrictions to __GO32__.
* readline.c (__GO32__): Some of this moved into rldefs.h
* signals.c (__GO32__): Likewise.
* rldefs.h (MSDOS||WIN32) becomes MSDOS||MSC.
(WIN32&&!WIN32): New definitions.
Ian Lance Taylor [Fri, 29 Sep 1995 19:36:07 +0000 (19:36 +0000)]
Add some support for i960 MRI compatibility mode.
* config/tc-i960.c (md_pseudo_table): Add endian.
(get_args): Don't discard a space between alphanumeric characters.
(get_cdisp): Change text_section to now_seg.
(s_endian): New static function.
* config/tc-i960.h (MRI_MODE_NEEDS_PSEUDO_DOT): Define.
* expr.h (operatorT): Add O_logical_not, O_logical_and, and
O_logical_or.
* expr.c (operand): Treat '!' as logical not operator. If
TC_I960, in MRI mode permit `sizeof secname' and `startof
secname'.
(op_rank): Bump values by 2 to make room for && and ||. Add
entries for !, &&, and ||.
(expr_begin): Only do MRI changes if TC_M68K.
(operator): Recognize || and &&.
(expr): Handle new operatorT values.
* symbols.c (resolve_symbol_value): Handle new operatorT values.
(print_expr_1): Likewise.
* read.c (potable): Add debug, err, irep, irepc, print, purgem,
and rep.
(read_a_source_file): Handle MRI_MODE_NEEDS_PSEUDO_DOT.
(mri_comment_field): Only handle weird comments if TC_M68K.
(s_err): New function.
(s_org): Only punt in MRI mode if TC_M68K.
(s_mri_sect): Write TC_I960 version.
(s_print, s_purgem): New functions.
* read.h (s_err, s_print, s_purgem): Declare.
* cond.c (s_ifeqs): Implement.
(ignore_input): Handle MRI_MODE_NEEDS_PSEUDO_DOT.
* macro.c (macro_strip_at): New static variable.
(macro_init): Add strip_at parameter.
(do_formals): If macro_strip_at, change NARG to $NARG.
(define_macro): Skip a comma after the macro name.
(get_apost_token): Skip character if macro_strip_at, even if
macro_mri.
(macro_expand_body): If macro_strip_at, don't recognize parameters
in strings unless they are preceded by an '@'. If macro_strip_at,
pass '@' as strip character to sub_actual. If macro_strip_at,
strip '@' characters.
(macro_expand): If macro_strip_at, change NARG to $NARG.
(delete_macro): New function.
(expand_irp): Skip leading and trailing '"' characters if irpc.
* macro.h (macro_init): Mention new strip_at parameter.
(delete_macro): Declare.
* as.c (main): If TC_I960, pass flag_mri to macro_init as
strip_at; otherwise, pass 0.
* gasp.c (process_pseudo_op): Pass 0 to macro_init as strip_at.
(main): Likewise.
* doc/as.texinfo: Document i960 MRI mode.
* as.c (show_usage): Mention --defsym.
Ian Lance Taylor [Fri, 29 Sep 1995 15:33:29 +0000 (15:33 +0000)]
* lexsup.c (parse_args): Don't set link_info.shared for -assert
pure-text. Pass true, not 1, to lang_add_entry.
* emultempl/sunos.em (find_assign): New static variable.
(found_assign): New static variable.
(gld${EMULATION_NAME}_before_allocation): Rename local h to hdyn.
If not a relocateable link, and no start symbol was specified on
the command line, and there are any undefined symbols, set
link_info.shared. If link_info.shared is set, set the address of
the .text section to 0x20.
(gld${EMULATION_NAME}_find_assignment): Rename from
gld${EMULATION_NAME}_find_statement_assignment. If find_assign is
set, then just set found_assign based on whether an assignment is
found to find_assign.
(gld${EMULATION_NAME}_get_script): Don't use a special script when
producing a shared library.
* emulparams/sun4.sh (GENERATE_SHLIB_SCRIPT): Remove.
* scripttempl/aout.sc: Remove CREATE_SHLIB tests.
* ldlang.c (entry_from_cmdline): New global variable.
(lang_add_entry): Change cmdline parameter from int to boolean.
Use global entry_from_cmdline rather than function static
from_cmdline.
* ldlang.h (entry_from_cmdline): Declare.
(lang_add_entry): Change declaration of second parameter from int
to boolean.
* ldgram.y: Pass false, not 0, to lang_add_entry.
Steve Chamberlain [Fri, 29 Sep 1995 09:22:29 +0000 (09:22 +0000)]
Fri Sep 29 02:10:05 1995 steve chamberlain <sac@slash.cygnus.com>
* Makefile.in (remote-rdp.o): Doesn't need remote-rdp.h
* callback.c (os_printf_filtered): fix protos.
* defs.h (puts_filtered, puts_unfiltered
[v|f|]printf_[un]filtered): Make format arg const.
* remote-rdp.c (rdp_init): Attept to sync at different
baudrates.
* utils.c (puts_filtered, puts_unfiltered
[v|f|]printf_[un]filtered): Define prototypes with
const in the right place.
Stan Shebs [Fri, 29 Sep 1995 04:21:00 +0000 (04:21 +0000)]
* mpw-configure: Fix sed command file name.
Stan Shebs [Fri, 29 Sep 1995 03:11:46 +0000 (03:11 +0000)]
Comings and goings of Mac-specific files.
Stan Shebs [Fri, 29 Sep 1995 03:07:08 +0000 (03:07 +0000)]
* mpw-config.in: Calculate underscore and put into makefile
fragment, generate config.h.
* mpw-make.sed: New file, sed commands to edit Unix makefile
into MPW syntax.
* mpw-make.in: Remove.
* mac-binutils.r: New file, Mac resources.
Stan Shebs [Fri, 29 Sep 1995 02:39:58 +0000 (02:39 +0000)]
Comings and goings of Mac-specific files.
Stan Shebs [Fri, 29 Sep 1995 02:38:28 +0000 (02:38 +0000)]
Changes to Mac-specific files.
Stan Shebs [Fri, 29 Sep 1995 02:37:17 +0000 (02:37 +0000)]
* mpw-config.in: Translate "powerpc" into "ppc", remove gen of
VERSION, move gen of "conf" here from makefile.
* mpw-make.sed: New file, sed commands to translate Unix makefile
into MPW syntax.
* mpw-make.in: Remove.
* mac-as.r: New file, Mac resource file.
* as.h (inline): Don't decide about defining if __MWERKS__,
remove redundant conditional and definition.
* stabs.c (s_stab_generic): Fix syntax for OBJ_PROCESS_STAB.
Stan Shebs [Fri, 29 Sep 1995 02:16:05 +0000 (02:16 +0000)]
Description of PowerMac changes.
Stan Shebs [Fri, 29 Sep 1995 02:14:51 +0000 (02:14 +0000)]
* config.bfd: Add powerpc-*-macos*, powerpc-*-mpw*.
* configure, configure.in: Add pmac_xcoff_vec case.
* Makefile.in (BFD32_BACKENDS): Add coff-pmac.o.
* coff-pmac.c: New file, PowerMac XCOFF support.
* coffcode.h (coff_set_arch_mach_hook): Add PowerMac case.
* targets.c (pmac_xcoff_vec): Declare.
* mpw-config.in: Various changes to be compatible with the
autoconf-based configury.
* mpw-make.sed: New file, sed commands to translate Unix
makefile into MPW syntax.
* mpw-make.in: Remove.
* hosts/mpw.h: Remove.
* bfd-in.h, bfd-in2.h: If MPW, include the file that defines
true and false as enums, then define TRUE_FALSE_ALREADY_DEFINED.
Per Bothner [Fri, 29 Sep 1995 01:43:54 +0000 (01:43 +0000)]
* defs.h (enum language): Add language_scm.
* expression.h (enum exp_code): Added OP_EXPRSTRING.
* scm-lang.c: Preliminary support for Guile /SCM dialect of Scheme.
* expprint.c (print_subexp): Add OP_EXPRSTRING support.
* parse.c (length_of_subexp, prefixify_subexp): Likewise.
* valops.c (find_function_in_inferior): New function.
(value_allocate_space_in_inferior): New function.
(allocate_space_in_inferior): Redefine using previous function.
* Makefile.in (SFILES): Add scm-lang.c.
(COMMON_OBS): Add scm-lang.o
Steve Chamberlain [Fri, 29 Sep 1995 00:48:00 +0000 (00:48 +0000)]
use bison
use ar rv.
Steve Chamberlain [Fri, 29 Sep 1995 00:41:15 +0000 (00:41 +0000)]
* configure.in (host i[345]86-*-win32): Reduce the
noconfigdirs again.
Steve Chamberlain [Fri, 29 Sep 1995 00:14:01 +0000 (00:14 +0000)]
Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com>
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
Steve Chamberlain [Fri, 29 Sep 1995 00:09:21 +0000 (00:09 +0000)]
Thu Sep 28 17:06:23 1995 steve chamberlain <sac@slash.cygnus.com>
* binary.c (binary_get_symtab): Return an empty string on error.
* opncls.c (bfd_fdpenr): Change WIN32 restriction to WINGDB.
Steve Chamberlain [Thu, 28 Sep 1995 22:51:39 +0000 (22:51 +0000)]
* dlltool.c: (gen_exp_file): Always emit a .reloc section if relocatable.
(imp_name_lab): New.
(gen_def_file): New.
(gen_lib_file): Use imp_name_lab.
(main): Initialize imp_name_lab.
Steve Chamberlain [Thu, 28 Sep 1995 22:42:28 +0000 (22:42 +0000)]
Thu Sep 28 15:40:36 1995 steve chamberlain <sac@slash.cygnus.com>
* run.c, run.1: From sh directory.
Steve Chamberlain [Thu, 28 Sep 1995 22:39:36 +0000 (22:39 +0000)]
Thu Sep 28 15:26:59 1995 steve chamberlain <sac@slash.cygnus.com>
* run.c: Moved to ../common.
* interp.c (trap): Use gdb's callback interface.
* Makefile.in: Updated.
Ian Lance Taylor [Thu, 28 Sep 1995 22:27:49 +0000 (22:27 +0000)]
* hp300hpux.c (convert_sym_type): Treat secondary symbols as weak
symbols rather than as indirect symbols.
(MY(slurp_symbol_table)): Don't do anything special about
secondary symbols.
Stan Shebs [Thu, 28 Sep 1995 20:23:31 +0000 (20:23 +0000)]
* mpw-mh-mpw: Add definitions for various 68K and PowerMac
compilers, add definitions for library and link steps for
PowerMacs.
Kim Knuttila [Thu, 28 Sep 1995 20:21:36 +0000 (20:21 +0000)]
updated changes
Kim Knuttila [Thu, 28 Sep 1995 19:40:52 +0000 (19:40 +0000)]
Updated comments
Ian Lance Taylor [Thu, 28 Sep 1995 19:18:07 +0000 (19:18 +0000)]
* ld.h (parsing_defsym): Declare.
* ldlex.h (lex_string): Declare.
* ldlex.l (lex_string): Define.
* lexsup.c (parsing_defsym): Define.
(parse_args): In OPTION_DEFSYM case, set lex_string before calling
lex_redirect, and clear it after calling yyparse. Set
parsing_defsym around call to yyparse.
* ldmain.c (main): Set lex_string before calling lex_redirect, and
clear it after calling yyparse.
* ldmisc.c (vfinfo): For %S, handle --defsym arguments and built
in linker scripts correctly.
PR 8092.
Ian Lance Taylor [Thu, 28 Sep 1995 17:59:51 +0000 (17:59 +0000)]
* scripttempl/sparccoff.sc: Add .ctors/.dtors handling like other
COFF targets, allowing for the leading underscore used on SPARC
COFF.
PR 8006.
Ian Lance Taylor [Thu, 28 Sep 1995 17:57:13 +0000 (17:57 +0000)]
* coffcode.h (coff_new_section_hook): Make sure that the alignment
of .ctors and .dtors sections is no larger than 2.
PR 8086.
Ian Lance Taylor [Thu, 28 Sep 1995 17:57:06 +0000 (17:57 +0000)]
* coffcode.h (coff_new_section_hook): Make sure that the alignment
of .ctors and .dtors sections is no larger than 2.
PR 8006.
David Edelsohn [Thu, 28 Sep 1995 17:33:04 +0000 (17:33 +0000)]
(arm-*-coff): Fix configuration.
Ian Lance Taylor [Thu, 28 Sep 1995 16:41:31 +0000 (16:41 +0000)]
mention creating SunOS shared libraries
Ian Lance Taylor [Thu, 28 Sep 1995 16:39:55 +0000 (16:39 +0000)]
* ld-shared/shared.exp: Run the tests on sparc*-*-sunos4*. Add
appropriate modifications and setup_xfails.
* ld-shared/sun4.dat: New file.
Ian Lance Taylor [Thu, 28 Sep 1995 16:36:34 +0000 (16:36 +0000)]
* lexsup.c (parse_args): Handle -assert.
* emulparams/sun4.sh (GENERATE_SHLIB_SCRIPT): Define.
* emultempl/sunos.em (gld${EMULATION_NAME}_get_script): Use the
shared library script when appropriate.
* scripttempl/aout.sc: If CREATE_SHLIB is set, start the .text
section at SIZEOF_HEADERS.
Ian Lance Taylor [Thu, 28 Sep 1995 16:30:54 +0000 (16:30 +0000)]
* sunos.c (sunos_add_one_symbol): Don't change
bfd_link_hash_common to bfd_link_hash_new, since it may be on the
undef list.
(bfd_sunos_record_link_assignment): Don't put __DYNAMIC in the
dynamic symbols when creating a shared library.
(sunos_scan_ext_relocs): Handle relocs correctly when creating a
shared library.
(sunos_scan_dynamic_symbol): Don't mark the __DYNAMIC symbol as
written even if it is not defined in a regular object.
(sunos_write_dynamic_symbol): Use plt_offset for the address of
the jump table reloc. Add an assertion. Use RELOC_JMP_SLOT
rather than the constant 22.
(sunos_check_dynamic_reloc): Handle creating a shared library.
(sunos_finish_dynamic_link): Set the first entry in the GOT to
zero when creating a shared library.
* aoutx.h (NAME(aout,final_link)): If there is a symbol __DYNAMIC,
write it out at the start of the symbol table.
Ian Lance Taylor [Thu, 28 Sep 1995 16:17:53 +0000 (16:17 +0000)]
* config/tc-ppc.h (tc_fix_adjustable): Define.
(ppc_pe_fix_adjustable): Declare.
* config/tc-ppc.c (ppc_pe_fix_adjustable): New function.
Ian Lance Taylor [Thu, 28 Sep 1995 15:21:35 +0000 (15:21 +0000)]
* Makefile.in (BFD32_BACKENDS): Add coff-arm.o.
David Edelsohn [Thu, 28 Sep 1995 08:48:02 +0000 (08:48 +0000)]
* Makefile.in (earmcoff.c): Build.
* configure.tgt (arm-*-coff): New target
* emulparms/armcoff.sh: New file.
* scripttempl/armcoff.sc: New file.
David Edelsohn [Thu, 28 Sep 1995 08:13:18 +0000 (08:13 +0000)]
* config/tc-arm.h (TARGET_FORMAT): Define for arm-coff.
David Edelsohn [Thu, 28 Sep 1995 08:08:49 +0000 (08:08 +0000)]
* config.bfd: Add arm-*-coff.
* configure.in, configure: Add armcoff_{little,big}_vec.
* targets.c (armcoff_{little,big}_vec): Declare.
(bfd_target_vector): Add armcoff_{little,big}_vec.
* coff-arm.c (armcoff_{little,big}_vec): Always define.
Ian Lance Taylor [Wed, 27 Sep 1995 20:21:07 +0000 (20:21 +0000)]
* symbols.c (S_IS_LOCAL): All symbols in reg_section are local.
Ian Lance Taylor [Wed, 27 Sep 1995 19:02:16 +0000 (19:02 +0000)]
* config/tc-ppc.h (OBJ_XCOFF): Define if OBJ_COFF and not TE_PE.
Change OBJ_COFF checks to check OBJ_XCOFF instead.
(TARGET_FORMAT): Fully parenthesize.
(LEX_QM): Define if TE_PE.
* config/tc-ppc.c: Replace OBJ_COFF by OBJ_XCOFF throughout.
Remove checks of TE_PE within #ifdef OBJ_XCOFF sections.
(init_regtable): Make i unsigned.
(ppc_set_current_section): Rename from setCurrentSection. Change
all callers.
(ppc_arch): Return after as_fatal to avoid gcc warning.
(md_assemble): Only declare reloc if OBJ_ELF. Add default to
switch on fixups[i].reloc to avoid gcc warning.
(IMAGE_SGN_LNK_OTHER): Fix nested comment.
(ppc_pe_function): Don't call ppc_canonicalize_symbol_name.
(ppc_frob_symbol): Remove TE_PE section checks.
(md_estimate_size_before_relax): Return after abort to avoid gcc
warning.
(md_apply_fix3): Add BFD_RELOC_16_GOT_PCREL to switch.
* read.c (LEX_QM): Define as 0 if not defined.
(lex_type): Use LEX_QM for '?'.
Per Bothner [Wed, 27 Sep 1995 18:51:33 +0000 (18:51 +0000)]
* tuples.ch. tuples.exp: Add new test for setting a variant record
using a tuple, and access the fields.
Per Bothner [Wed, 27 Sep 1995 18:47:22 +0000 (18:47 +0000)]
* valops.c (search_struct_field): Also allow "else" as a variant name,
Ian Lance Taylor [Wed, 27 Sep 1995 17:39:16 +0000 (17:39 +0000)]
check powerpc-*-pe* as well as powerpc-*-winnt*
Per Bothner [Wed, 27 Sep 1995 17:24:45 +0000 (17:24 +0000)]
* eval.c (evaluate_struct_tuple): New function. Used to evaluate
structure tuples. Now also handles Chill variant records.
(get_label): New function, used by evaluate_struct_tuple.
(evaluate_subexp_standard case OP_ARRAY): Use evaluate_struct_tuple.
(evaluate_labeled_field_init): Removed.
* valops.c (search_struct_field): Generalize to work with Chill
variant records.
Ian Lance Taylor [Wed, 27 Sep 1995 16:56:23 +0000 (16:56 +0000)]
* configure.in: No need to check whether ${cpu_type} is powerpc;
it never will be.
* configure: Rebuild.
Kim Knuttila [Wed, 27 Sep 1995 16:33:05 +0000 (16:33 +0000)]
Details of more fixes to earlier fixes
Ian Lance Taylor [Wed, 27 Sep 1995 16:24:58 +0000 (16:24 +0000)]
* configure.in: Don't configure ld and gdb for powerpc*-*-winnt*,
since they are not yet supported.
Kim Knuttila [Wed, 27 Sep 1995 16:23:12 +0000 (16:23 +0000)]
Removed an extraneous PPC definition
Kim Knuttila [Wed, 27 Sep 1995 16:03:36 +0000 (16:03 +0000)]
Added back some missing code @ diff tc-ppc.c
Michael Meissner [Wed, 27 Sep 1995 15:37:54 +0000 (15:37 +0000)]
Undo md_apply_fix3 changes
Kim Knuttila [Wed, 27 Sep 1995 15:10:28 +0000 (15:10 +0000)]
Removed inactive bfd entries
Kim Knuttila [Wed, 27 Sep 1995 14:52:16 +0000 (14:52 +0000)]
Initial asm support for ppc/PE
Kim Knuttila [Wed, 27 Sep 1995 14:49:37 +0000 (14:49 +0000)]
Configure support for ppc/PE
Kim Knuttila [Wed, 27 Sep 1995 14:48:45 +0000 (14:48 +0000)]
Added assembler support for ppc/PE environments
Kim Knuttila [Wed, 27 Sep 1995 14:47:41 +0000 (14:47 +0000)]
Added TE_PE target environment support
Ian Lance Taylor [Wed, 27 Sep 1995 14:38:03 +0000 (14:38 +0000)]
* targets.c (bfd_find_target): Remove debugging code.
Ian Lance Taylor [Wed, 27 Sep 1995 14:29:22 +0000 (14:29 +0000)]
add new coff-ppc files
Ian Lance Taylor [Wed, 27 Sep 1995 14:24:33 +0000 (14:24 +0000)]
add powerpc.h
Kim Knuttila [Wed, 27 Sep 1995 11:40:15 +0000 (11:40 +0000)]
PPC bfd support
Kim Knuttila [Wed, 27 Sep 1995 11:37:49 +0000 (11:37 +0000)]
PPC magic and peicode.h
Kim Knuttila [Wed, 27 Sep 1995 11:36:47 +0000 (11:36 +0000)]
Configury for new ppc bfd
Kim Knuttila [Wed, 27 Sep 1995 11:34:10 +0000 (11:34 +0000)]
First round BFD for PE/PowerPC
Kim Knuttila [Wed, 27 Sep 1995 11:06:00 +0000 (11:06 +0000)]
Powerpc and Pe support.
Kim Knuttila [Wed, 27 Sep 1995 11:03:15 +0000 (11:03 +0000)]
basic coff for powerpc/PE
Stan Shebs [Wed, 27 Sep 1995 02:05:39 +0000 (02:05 +0000)]
mpw-make.in is out, mpw-make.sed is in.
Stan Shebs [Wed, 27 Sep 1995 01:53:07 +0000 (01:53 +0000)]
* mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
no longer create sysdep.h, sed ppc-opc.c to work around a
serious Metrowerks C bug.
* mpw-make.in: Remove.
* mpw-make.sed: New file, used by mpw-configure to edit
Makefile.in into an MPW makefile.
Stan Shebs [Tue, 26 Sep 1995 21:51:30 +0000 (21:51 +0000)]
Add PowerMac support and many other enhancements.
* mpw-configure: New option --cc to select compiler to use,
paste options set according to --cc into the generated
Makefile, generate the Makefile by sed'ing the Unix Makefile.in
if mpw-make.sed is present.
* mpw-config.in: Don't test for gC1, test for mpw-touch,
add forward includes for PowerPC include files.
* mpw-build.in: Build using Makefile.PPC if present.
(do-byacc, etc): Remove separate version resource builds.
(do-gas): Build "stamps" before "all".
(do-gcc): Build "stamps-h" and "stamps-c" before "all".
* mpw-README: Update to reflect --cc option, PowerMac support,
and recently-reported compatibility problems.
Michael Meissner [Tue, 26 Sep 1995 19:17:10 +0000 (19:17 +0000)]
Support all of the V.4 relocations
Ian Lance Taylor [Tue, 26 Sep 1995 18:45:16 +0000 (18:45 +0000)]
* bfd.c (bfd_assert): Remove \n from string passed to
_bfd_error_handler.
Michael Meissner [Tue, 26 Sep 1995 18:26:32 +0000 (18:26 +0000)]
Flesh out branch prediction support.
Ian Lance Taylor [Tue, 26 Sep 1995 18:01:34 +0000 (18:01 +0000)]
* scripttempl/i386coff.sc: Remove .data2; no longer needed.
Ian Lance Taylor [Tue, 26 Sep 1995 17:58:38 +0000 (17:58 +0000)]
* coff-i386.c: (TWO_DATA_SECS): Don't define.
* coffcode.h (bfd_coff_backend_data): Remove _bfd_make_section_hook.
(bfd_coff_make_section_hook): Don't define.
(coff_make_section_hook): Remove.
(sec_to_styp_flags): Remove TWO_DATA_SECS case.
(styp_to_sec_flags): Likewise.
(coff_write_object_contents): Likewise.
(bfd_coff_std_swap_table): Don't initialize make_section_hook
field.
* libcoff.h: Rebuild.
* coffgen.c (make_a_section_from_file): Just call
bfd_make_section_anyway, not bfd_make_section or
bfd_coff_make_section_hook.
* ecoff.c (_bfd_ecoff_make_section_hook): Remove.
* libecoff.h (_bfd_ecoff_make_section_hook): Don't declare.
* coff-alpha.c (alpha_ecoff_backend_data): Don't initialize
make_section_hook field.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
Ian Lance Taylor [Tue, 26 Sep 1995 16:56:28 +0000 (16:56 +0000)]
* aoutx.h (translate_from_native_sym_flags): Don't try to stuff
pointers into value field for warning and indirect symbols; just
leave the value field alone.
* linker.c (generic_link_add_symbol_list): Use next symbol for
warning and indirect symbols, rather than looking in symbol value.
* ecoff.c (ecoff_set_symbol_info): Remove indirect_ptr_ptr
parameter. Change all callers. Remove support for indirect
symbols; it didn't work anyhow.
(_bfd_ecoff_slurp_symbol_table): Remove indirect_ptr variable.
* syms.c: Change comments about BSF_WARNING and BSF_INDIRECT.
* bfd-in2.h: Rebuild.
Ian Lance Taylor [Mon, 25 Sep 1995 21:31:29 +0000 (21:31 +0000)]
* aout-adobe.c (aout_adobe_callback): Use _bfd_error_handler
rather than a direct fprintf.
* archive.c (_bfd_write_archive_contents): Likewise.
* coffcode.h (coff_slurp_symbol_table): Likewise.
* elf32-ppc.c (ppc_elf_merge_private_bfd_data): Likewise.
(ppc_elf_unsupported_reloc): Likewise.
(ppc_elf_relocate_section): Likewise.
* i386linux.c (linux_tally_symbols): Likewise.
(linux_finish_dynamic_link): Likewise.
* osf-core.c (osf_core_core_file_p): Likewise.
* rs6000-core.c (rs6000coff_get_section_contents): Likewise.
* som.c (som_sizeof_headers): Likewise.
* srec.c (srec_bad_byte): Likewise.
* bfd.c (bfd_assert): Likewise. Also change file to be const.
* libbfd-in.h (bfd_assert): Declare first parameter const.
* libbfd.h: Rebuild.
* coff-a29k.c (a29k_reloc): Don't bother to fprintf; returning
bfd_reloc_overflow is enough.
* coff-h8300.c (rtype2howto): Don't bother to fprintf; just abort.
* coff-h8500.c (rtype2howto): Likewise.
* coff-z8k.c (rtype2howto): Likewise.
* coffcode.h (dummy_reloc16_extra_cases): Likewise.
* elf.c (_bfd_elf_get_lineno): Likewise.
(_bfd_elf_no_info_to_howto): Likewise.
(_bfd_elf_no_info_to_howto_rel): Likewise.
* hp300hpux.c (convert_sym_type): Likewise.
(MY(swap_std_reloc_in)): Likewise.
* elf.c (bfd_section_from_shdr): Remove #if 0 sections.
Ian Lance Taylor [Mon, 25 Sep 1995 20:55:50 +0000 (20:55 +0000)]
* libaout.h (struct aoutdata): Add line_buf field.
* aoutx.h (NAME(aout,find_nearest_line)): Remove statics buffer
and filename_buffer. Instead, use a malloc buffer stored in the
new line_buf field. Remove length restrictions.
Ian Lance Taylor [Mon, 25 Sep 1995 20:25:12 +0000 (20:25 +0000)]
* coffgen.c (string_size): Remove static variable.
(debug_string_size, debug_string_section): Likewise.
(coff_fix_symbol_name): Add string_size_p, debug_string_section_p,
and debug_string_size_p parameters. Use them instead of the
global variables. Change all callers.
(coff_write_symbol): Likewise.
(coff_write_alien_symbol, coff_write_native_symbol): Likewise.
(coff_write_symbols): Add local variables to replace removed
global variables.
Michael Meissner [Mon, 25 Sep 1995 20:15:13 +0000 (20:15 +0000)]
Better reloc support
Michael Meissner [Mon, 25 Sep 1995 20:07:26 +0000 (20:07 +0000)]
Fix previous change
Ian Lance Taylor [Mon, 25 Sep 1995 20:03:11 +0000 (20:03 +0000)]
* libcoff-in.h (struct coff_section_tdata): Add offset, i,
function, and line_base fields.
* libcoff.h: Rebuild.
* coffgen.c (coff_find_nearest_line): Use section tdata to cache
information, rather than using static variables.
Ian Lance Taylor [Mon, 25 Sep 1995 16:45:16 +0000 (16:45 +0000)]
* sunos.c (sunos_read_dynamic_info): Adjust offsets in an NMAGIC
file. From Peter DeWolf <pld@amt.tay1.dec.com>.
Ian Lance Taylor [Mon, 25 Sep 1995 16:32:51 +0000 (16:32 +0000)]
* gas/mri/mri.exp: Add setup_xfail for arm*-*-* for constants
test.
Ian Lance Taylor [Mon, 25 Sep 1995 16:29:30 +0000 (16:29 +0000)]
* config/tc-arm.c (md_atof): Output little endian constants in
little endian mode.
Ian Lance Taylor [Mon, 25 Sep 1995 16:22:43 +0000 (16:22 +0000)]
* configure.in: Call AC_HEADER_SYS_WAIT.
* configure: Rebuild.
* config.in: Rebuild.
* dlltool.c: Include "libiberty.h" and "bucomm.h". Don't include
<stdio.h>, <stdlib.h>, or <string.h>. Don't include <wait.h>.
Include <sys/types.h>. Use HAVE_SYS_WAIT_H to control whether to
include <sys/wait.h> or define the wait macros by hand. Don't
declare xmalloc.
(gen_lib_file): Don't assume that sprintf returns the number of
characters; use strlen instead.
Ian Lance Taylor [Mon, 25 Sep 1995 15:50:25 +0000 (15:50 +0000)]
* init.c (initialized): Remove static variable.
(bfd_init): Don't bother setting initialized.
(bfd_check_init): Remove.
* opncls.c (_bfd_new_bfd): Don't call bfd_check_init.
* libbfd.h: Rebuild.
Ian Lance Taylor [Mon, 25 Sep 1995 04:26:30 +0000 (04:26 +0000)]
* configure.in: Fix typo: fmt-elf to fmt=elf.
Peter Schauer [Sat, 23 Sep 1995 13:30:04 +0000 (13:30 +0000)]
* rs6000-tdep.c (push_dummy_frame): Handle lr_offset of zero
correctly.
Peter Schauer [Sat, 23 Sep 1995 11:09:52 +0000 (11:09 +0000)]
* mdebugread.c (parse_partial_symbols): Reset includes_used
and dependencies_used after finishing the partial symbol table.
* rs6000-nat.c (xcoff_relocate_core): Don't relocate data
addresses for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE
is defined.
* xcoffread.c: gcc -Wall lint. Remove traceback table reading
code. The existing code tried to add parameter information for
functions compiled without -g, which cannot be done properly
for optimized code and produced misleading parameter displays.
(ef_complaint, eb_complaint): Make a local static copy to avoid
dependency on coffread.c.
(read_xcoff_symtab, process_xcoff_symbol, scan_xcoff_symtab):
Enter C_EXT/C_HIDEXT symbols into the minimal symbol table only.
(read_xcoff_symtab): Ignore C_STAT section auxiliary entry
symbols. Complain about unmatched .ef and .eb symbols instead of
segfaulting.
(process_xcoff_symbol): Determine value of C_GSYM symbols via
the global_sym_chain mechanism in stabsread.c.
(xcoff_new_init): Call stabsread_new_init and buildsym_new_init.
(init_string_tab): Initialize length field bytes in the strtbl.
(scan_xcoff_symtab): Skip symbols that start with `$' or `.$'.
Set first_fun_line_offset for symbols with two auxents only.
Peter Schauer [Sat, 23 Sep 1995 11:04:45 +0000 (11:04 +0000)]
* rs6000-core.c (rs6000coff_core_p): Don't check the core file
size for full core dumps. Copy core file header to private data.
(rs6000coff_core_file_failing_command,
rs6000coff_core_file_failing_signal): New functions to extract
the file name and terminating signal from the core file.
* coff-rs6000.c: Use them.
Ian Lance Taylor [Fri, 22 Sep 1995 22:09:43 +0000 (22:09 +0000)]
* ldfile.c (ldfile_set_output_arch): Make arch const.
Ian Lance Taylor [Fri, 22 Sep 1995 22:06:51 +0000 (22:06 +0000)]
Change arch info to be const, initialized at compile time.
* archures.c: Reindent many functions. Change CONST to const.
(bfd_arch_info_type): Make arch_name const. Remove disassemble;
nothing set it anyhow. Make next const.
(bfd_arch_info_list): Remove.
(bfd_archures_list): Rename from archures_init_table. Change from
a table of function pointers to a table of bfd_arch_info_type
structure addresses.
(bfd_scan_arch): Rewrite accordingly. Return a const pointer.
(bfd_lookup_arch): Likewise.
(bfd_set_arch_info): Rewrite accordingly. Change argument to be a
const pointer.
(bfd_default_arch_struct): Make const.
(bfd_arch_init, bfd_arch_linkin): Remove.
(bfd_get_arch_info): Return a const pointer.
* init.c (bfd_init): Don't call bfd_arch_init.
* bfd.c (struct _bfd): Make arch_info const.
* bfd-in2.h: Rebuild.
* libbfd.h: Rebuild.
* configure.in: Put & before everything in $selarchs.
* configure: Rebuild.
* cpu-*.c: Change bfd_*_arch from a function which calls
bfd_arch_linkin to a const structure.
* ieee.c (ieee_object_p): Make arch const.
Ian Lance Taylor [Fri, 22 Sep 1995 21:19:38 +0000 (21:19 +0000)]
* objdump.c (disassemble_data): Don't use the old BFD based
disassembler interface. Make info a const pointer.
Michael Meissner [Fri, 22 Sep 1995 20:42:38 +0000 (20:42 +0000)]
start at handling branch taken/branch not taken hints.
Michael Meissner [Fri, 22 Sep 1995 20:30:18 +0000 (20:30 +0000)]
Start work to all full PowerPC V.4 reloc support.
This page took 0.041158 seconds and 4 git commands to generate.