Monam Agarwal [Sun, 9 Mar 2014 05:28:40 +0000 (10:58 +0530)]
Staging: iio/light: Fix return values in tsl2583.c
This patch fixes following smatch warnings:
/drivers/staging/iio/light/tsl2583.c:436 taos_chip_on() info: why not propagate 'ret' from i2c_smbus_write_byte_data() instead of (-1)?
/drivers/staging/iio/light/tsl2583.c:448 taos_chip_on() info: why not propagate 'ret' from i2c_smbus_write_byte_data() instead of (-1)?
/drivers/staging/iio/light/tsl2583.c:461 taos_chip_on() info: why not propagate 'ret' from i2c_smbus_write_byte_data() instead of (-1)?
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chi Pham [Sun, 9 Mar 2014 09:39:04 +0000 (10:39 +0100)]
staging:dgnc: Removed assignments from if statements.
Coccinelle was used for this patch. The script is not complete (semantically) and might raise some checkpatch warnings in terms of indentation depending on existing code.
*** IFASSIGNMENT.COCCI START ***
/* Coccinelle script to handle assignments in if statements
* For compound statements, can so far only handle statements with the
* assignment on either extreme */
/* This rule is for simple cases
* e.g. just an assignment in if, possibly with unary operator */
@simple@
expression E1, E2;
statement S1, S2;
@@
+ E1 = E2;
if (
- (E1 = E2)
+ E1
)
S1 else S2
/* This rule is for compound statements where the assignment is on the right.*/
@right@
expression E, E1, E2;
statement S1, S2;
@@
(
/* and */
- if (E && (E1 = E2))
+ if (E) {
+ E1 = E2;
+ if (E1)
S1 else S2
+ } else S2
|
- if (E && (E1 = E2))
+ if (E) {
+ E1 = E2;
+ if (E1)
S1
+ }
/* or */
|
- if (E || (E1 = E2))
+ if (!E) {
+ E1 = E2;
+ if (E1)
S1 else S2
+ }
+ else S1
|
- if (E || (E1 = E2))
+ if (!E) {
+ E1 = E2;
+ if (E1) S1
+ } else
S1
/* not equal */
|
- if (E != (E1 = E2))
+ E1 = E2;
+ if (E != E1)
S1 else S2
|
- if (E != (E1 = E2))
+ E1 = E2;
+ if (E != E1)
S1
/* equal */
|
- if (E == (E1 = E2))
+ E1 = E2;
+ if (E == E1)
S1 else S2
|
- if (E == (E1 = E2))
+ E1 = E2;
+ if (E == E1)
S1
/* greater than */
|
- if (E > (E1 = E2))
+ E1 = E2;
+ if (E > E1)
S1 else S2
|
- if (E > (E1 = E2))
+ E1 = E2;
+ if (E > E1)
S1
/* less than */
|
- if (E < (E1 = E2))
+ E1 = E2;
+ if (E < E1)
S1 else S2
|
- if (E < (E1 = E2))
+ E1 = E2;
+ if (E < E1)
S1
/* lesser than or equal to */
|
- if (E <= (E1 = E2))
+ E1 = E2;
+ if (E <= E1)
S1 else S2
|
- if (E <= (E1 = E2))
+ E1 = E2;
+ if (E <= E1)
S1
/* greater than or equal to */
|
- if (E >= (E1 = E2))
+ E1 = E2;
+ if (E >= E1)
S1 else S2
|
- if (E >= (E1 = E2))
+ E1 = E2;
+ if (E >= E1)
S1
)
/* This rule is for compound statements where the assignment is on the left.*/
@left@
expression E, E1, E2;
statement S1, S2;
@@
(
/* and */
- if ((E1 = E2) && E)
+ E1 = E2;
+ if (E1 && E)
S1 else S2
|
- if ((E1 = E2) && E)
+ E1 = E2;
+ if (E1 && E)
S1
|
/* or */
- if ((E1 = E2) || E)
+ E1 = E2;
+ if (E1 || E)
S1
|
- if ((E1 = E2) || E)
+ E1 = E2;
+ if (E1 || E)
S1 else S2
|
/* not equal */
- if ((E1 = E2) != E)
+ E1 = E2;
+ if (E1 != E)
S1
|
- if ((E1 = E2) != E)
+ E1 = E2;
+ if (E1 != E)
S1 else S2
|
/* equal */
- if ((E1 = E2) == E)
+ E1 = E2;
+ if (E1 == E)
S1
|
- if ((E1 = E2) == E)
+ E1 = E2;
+ if (E1 == E)
S1 else S2
|
/* greater */
- if ((E1 = E2) > E)
+ E1 = E2;
+ if (E1 > E)
S1
|
- if ((E1 = E2) > E)
+ E1 = E2;
+ if (E1 > E)
S1 else S2
|
/* less */
- if ((E1 = E2) < E)
+ E1 = E2;
+ if (E1 < E)
S1
|
- if ((E1 = E2) < E)
+ E1 = E2;
+ if (E1 < E)
S1 else S2
/* lesser than or equal to */
- if ((E1 = E2) <= E)
+ E1 = E2;
+ if (E1 <= E)
S1
|
- if ((E1 = E2) <= E)
+ E1 = E2;
+ if (E1 <= E)
S1 else S2
/* greater than or equal to */
- if ((E1 = E2) >= E)
+ E1 = E2;
+ if (E1 >= E)
S1
|
- if ((E1 = E2) >= E)
+ E1 = E2;
+ if (E1 >= E)
S1 else S2
)
*** IFASSIGNMENT.COCCI END ***
Signed-off-by: Chi Pham <fempsci@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Georgiana Rodica Chelu [Sun, 9 Mar 2014 12:40:14 +0000 (14:40 +0200)]
staging: android: Remove whitespace issue
This patch fixes coding style issue: removing the whitespace
Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Ngu [Sun, 16 Mar 2014 19:17:28 +0000 (08:17 +1300)]
Staging: gdm724x: gdm_mux.c: fixed coding style
Line over 80 characters
Signed-off-by: Daniel Ngu <daniel.dy.ngu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Ngu [Sun, 16 Mar 2014 19:12:32 +0000 (08:12 +1300)]
Staging: gdm724x: netlink_k.c: fixed coding style
Line over 80 characters
Signed-off-by: Daniel Ngu <daniel.dy.ngu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 16 Mar 2014 12:34:11 +0000 (12:34 +0000)]
staging: vt6656: [BUG] Fix Warning BOGUS urb xfer, pipe 3 != type 1
Stable kernels will need patches
staging: vt6656: s_nsInterruptUsbIoCompleteRead remove usb_fill_bulk_urb
staging: vt6656: PIPEnsInterruptRead use usb_fill_int_urb
and a backported version of this patch.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fengguang Wu [Sun, 16 Mar 2014 20:32:22 +0000 (15:32 -0500)]
staging: r8188eu: fix coccinelle warnings
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:8030:3-9: Replace memcpy with struct assignment
Generated by: coccinelle/misc/memcpy-assign.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pinot [Thu, 13 Mar 2014 15:44:30 +0000 (00:44 +0900)]
staging/ozwpan: coding style ether_addr_copy
This fixes the following issues detected by checkpatch.pl:
WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)
#220: FILE: drivers/staging/ozwpan/ozcdev.c:220:
+ memcpy(g_cdev.active_addr, addr, ETH_ALEN);
WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)
#286: FILE: drivers/staging/ozwpan/ozcdev.c:286:
+ memcpy(addr, g_cdev.active_addr, ETH_ALEN);
WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)
#176: FILE: drivers/staging/ozwpan/ozpd.c:176:
+ memcpy(pd->mac_addr, mac_addr, ETH_ALEN);
Signed-off-by: Jerome Pinot <ngc891@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Mon, 17 Mar 2014 15:37:11 +0000 (10:37 -0500)]
Staging: unisys: visorutil: Clean up sparse warnings in visorutil code
Clean up code to get rid of sparse warnings.
Also fixed variable length arrays declared on the stack by removing
visor_hexDumpToBuffer() and using hex_dump_to_buffer() instead.
Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Thu, 13 Mar 2014 20:39:22 +0000 (15:39 -0500)]
Staging: unisys: visorchipset: Clean up sparse warnings in visorchipset code.
Clean up code to get rid of sparse warnings due to accessing I/O space. Also
declared functions and variables as static if they are only used locally.
Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Thu, 13 Mar 2014 20:39:21 +0000 (15:39 -0500)]
Staging: unisys: visorchannel: Clean up sparse warnings in visorchannel code
Clean up code to get rid of sparse warnings, mostly due to accessing I/O space.
Remove visorchannel_get_safe_queue(), visorchannel_safesignalremove(),
and visorchannel_safesignalinsert() since they were not called from anywhere.
Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Thu, 13 Mar 2014 20:39:20 +0000 (15:39 -0500)]
Staging: unisys: uislib: Cleanup sparse warnings in uislib
Clean up code to get rid of sparse warnings, mostly related to accessing I/O
space.
Remove uislibcmpxchg64() and use cmpxchg() instead.
Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Thu, 13 Mar 2014 20:39:19 +0000 (15:39 -0500)]
Staging: unisys: Clean multiple sparse warnings
Cleaned up multiple sparse warnings, mostly due to improper access of I/O
space. Also declared functions and variables that were only used locally
as static.
Removed ULTRA_disp_channel_header(), ULTRA_disp_channel(),
ULTRA_disp_vnic_channel() because they were never called.
Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Thu, 13 Mar 2014 20:39:18 +0000 (15:39 -0500)]
Staging: unisys: channels: Cleanup sparse warnings
Clean up multiple sparse warnings mostly due to different address spaces
when accessing I/O memory.
Also, remove SignalRemoveAll(), SignalQueueHasOneElement(),
SignalQueueIsFull(), because they were never called.
Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Tue, 11 Mar 2014 07:31:03 +0000 (00:31 -0700)]
staging: unisys: remove incorrect error handling after queue_delayed_work
The queue_delayed_work() return false if the work is
already on the queue, true otherwise.
So return value cannot be less than zero.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Tue, 11 Mar 2014 03:19:06 +0000 (12:19 +0900)]
staging: dgnc: replace unnecessary while() with if()
It doesn't need to use while loop for getting newrate,
because it always breaks out the end of while loop with
"break". So just replace while with if.
And the type of newrate is "unsigned int", this type
is never less than zero. If it can be set to negative value by
user application with ioctl(), it is not zero but it
can be a unexpected value for setting custom baudrate.
Also smatch says:
drivers/staging/dgnc/dgnc_tty.c:967 dgnc_set_custom_speed() warn:
unsigned 'newrate' is never less than zero.
drivers/staging/dgnc/dgnc_tty.c:981 dgnc_set_custom_speed() info:
ignoring unreachable code.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Wed, 12 Mar 2014 16:50:56 +0000 (12:50 -0400)]
staging: dgap: Add a pr_info per board info
This patch adds a pr_info per board that indicates
board number, type, etc..
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Wed, 12 Mar 2014 16:50:55 +0000 (12:50 -0400)]
staging: dgap: remove more unneeded brd-state states
This patch removes more unneeded brd-state states
Signed-off-by: Mark Hounschell <markh@compro.net>
Tested-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Wed, 12 Mar 2014 16:50:54 +0000 (12:50 -0400)]
staging: dgap: remove unused brd->state states
This patch removes unused brd->state states previously
used in the userland firmware download process.
Signed-off-by: Mark Hounschell <markh@compro.net>
Tested-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Wed, 12 Mar 2014 16:50:53 +0000 (12:50 -0400)]
staging: dgap: remove unneeded dgap_driver_states
The only driver states we need now is READY or !READY.
No need for a sysfs method of seeing those 2 states so
the sysfs entries for dgap_driver_state is also removed.
Signed-off-by: Mark Hounschell <markh@compro.net>
Tested-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Tue, 11 Mar 2014 14:11:43 +0000 (10:11 -0400)]
staging: dgap: Replace/remove DGAP_SPINLOCK_INIT macro
This patch gets rid of the DGAP_SPINLOCK_INIT macro
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Tue, 11 Mar 2014 14:08:11 +0000 (10:08 -0400)]
staging: dgap: Remove unused DGAP_TRYLOCK macro
This patch removes the unused DGAP_TRYLOCK macro
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Tue, 11 Mar 2014 14:02:19 +0000 (10:02 -0400)]
staging: dgap: Remove unneeded code from dgap.c
This patch removes more unneeded code that was
supporting the old firmware loading process
Signed-off-by: Mark Hounschell <markh@compro.net>
Tested-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Tue, 11 Mar 2014 14:02:18 +0000 (10:02 -0400)]
staging: dgap: remove some unused defines in dgap.h
This patch removes some unused defines in dgap.h
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Mon, 10 Mar 2014 19:46:55 +0000 (15:46 -0400)]
staging: dgap: fix a few more 80+ char lines (02/02)
This patch fixes a few more 80+ char lines as reported by checkpatch
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Mon, 10 Mar 2014 19:46:54 +0000 (15:46 -0400)]
staging: dgap: fix a few more 80+ char lines (01/02)
This patch fixes a few more 80+ char lines as reported by checkpatch
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Mon, 10 Mar 2014 18:39:41 +0000 (14:39 -0400)]
staging: dgap: fix a few 80+ char lines
This patch fixes a few 80+ char lines
as reported by checkpatch
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Mon, 17 Mar 2014 21:15:03 +0000 (21:15 +0000)]
staging: vt6656: [BUG] set usb_fill_int_urb interval to 1
As result of patch
staging: vt6656: [BUG] Fix Warning BOGUS urb xfer, pipe 3 != type 1
has resulted in sluggish TX performance due to interupt inverval
being too long.
Set int_interval to 1 as set in bInterval of endpoint 1.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gary Rookard [Tue, 11 Mar 2014 03:24:29 +0000 (23:24 -0400)]
Staging: lustre: fld: fix split strings.
unsplit strings from two lines to one. Changes resulted
in line over 80 characters warning. Leaving the latter
of the two warnings for possible string grepping reasons.
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gary Rookard [Tue, 11 Mar 2014 01:59:09 +0000 (21:59 -0400)]
Staging: lustre: fld: fix spacing issue.
fixed up a spacing issue.
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gary Rookard [Tue, 11 Mar 2014 01:47:43 +0000 (21:47 -0400)]
Staging: lustre: fld: fix split string.
unsplit string from two lines to one.
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gary Rookard [Tue, 11 Mar 2014 01:21:22 +0000 (21:21 -0400)]
Staging: lustre: fid: fix split strings.
unsplit strings from two lines to one.
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Fri, 14 Mar 2014 09:08:43 +0000 (18:08 +0900)]
staging: cxt1e1: remove redundant memset() call
The banner array doens't need to set to 0.
sprintf() adds a terminating '\0'.
And the sn array can be declared and initialized to zero.
So remove redundant memset() with zero.
Remove unnecessary cast for memcpy().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Sun, 9 Mar 2014 23:56:55 +0000 (08:56 +0900)]
staging: cxt1e1: remove redundant memset() call
The name array doens't need to set to 0. Because
sprintf/snprintf adds a terminating '\0'.
And also it doesn't need to assign name array
address to np pointer.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Monam Agarwal [Sun, 9 Mar 2014 13:10:23 +0000 (18:40 +0530)]
Staging: slicoss: Replace macro with inline defination in slicoss.c
This patch moves the macro "SLIC_GET_SLIC_HANDLE(_adapter, _pslic_handle)" to inline
in slicoss.c since it has been used only once.
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 14 Mar 2014 19:24:26 +0000 (12:24 -0700)]
staging: comedi: das6402: rewrite broken driver
This driver is _really_ broken.
It initializes an analog input subdevice that only has a (*cancel)
function. It also does a request_irq() to hookup an interrupt handler
using it->options[0] as the IRQ. This option is actually the base
address of the I/O region used by the board. If the interrupt handler
actually did get hooked up, the rest of the code assumes that IRQ 10
is being used.
Rewrite the driver to properly support the hardware.
The DAS6402-12/16 boards have 64 single-ended / 32 differential analog
inputs, 2 analog outputs, 8 digital inputs, and 8 digital outputs. Add
proper support for these subdevices.
Stub in the analog input async command support.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 22:48:43 +0000 (15:48 -0700)]
staging: comedi: rti802: update the MODULE_DESCRIPTION
Change the generic MODULE_DESCRIPTION text to something more
specific for this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 22:48:42 +0000 (15:48 -0700)]
staging: comedi: rti802: tidy up the multi-line comments
Tidy up the milti-line comments so they follow the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 22:48:41 +0000 (15:48 -0700)]
staging: comedi: rti802: tidy up the register map defines
For aesthetics, add some whitespace to the register map defines and
convert the offsets to hex.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 22:48:40 +0000 (15:48 -0700)]
staging: comedi: rti802: tidy up the subdevice init
For aesthetics, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 22:48:39 +0000 (15:48 -0700)]
staging: comedi: rti802: tidy up rti802_ao_insn_write()
Use comedi_offset_munge() to handle munging the offset binary to two's
complement.
Tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 22:48:38 +0000 (15:48 -0700)]
staging: comedi: rti802: tidy up rti802_ao_insn_read()
To clarify the function a bit, add a local variable for the 'chan'
that is being read and change the final return to 'insn->n'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 22:48:37 +0000 (15:48 -0700)]
staging: comedi: rti802: remove RTI802_SIZE define
This define is only used in the attach to specify the I/O region size
passed to comedi_request_region(). Remove the define and just open
code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:34 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: tidy up multi-line comment
Tidy up the comment to follow the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:33 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: remove pr_fmt() define
This driver no longer has any pr_{level} messages. Remove the pr_fmt().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:32 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: convert comedi_error() messages to dev_err()
For aesthetics, convert the comedi_error() messages to dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:31 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: tidy up the boardinfo
Remove the unnecessary comments in the boardinfo definition and
tidy up the declaration.
FWIW, I'm not sure this boardinfo is really needed...
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:30 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: tidy up the register map
For aesthetics, convert the various enums into simple defines to
describe the register map for the board. Group the bit defines with
the associated register define. Convert the helper functions for
the register bit/shift/mask stuff into simple defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:29 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: rename 'hpdi_iobase' in private data
This member in the private data holds the ioremaped PCI BAR2 address
which is the primary base address for the boards registers.
For aesthetics, rename this member simply 'mmio'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:28 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: rename 'plx9080_iobase' in private data
Rename this member to fix two checkpatch.pl warnings about lines > 80
characters.
Also remove the unnecessary comment.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:27 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: tidy up gsc_hpdi_drain_dma()
Refactor this function to clarify the loop that reads all the full
buffers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:26 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: remove 'volatile' from the private data members
As reported by checkpatch.pl, the private data members do not need
the volatile tag. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:25 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: remove hpdi_writel()
This helper function is used to OR bits with a software copy of a
register value then writel() the new value to the register. The
software copies are never updated in the driver so they are always
0 due to the kzalloc.
Remove the unnecessary 'bits' from the private data and replace
the hpdi_writel() calls with writel().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:24 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: remove disable_plx_interrupts()
This helper function is just a simple writel(). Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:23 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: rename init_hpdi()
For aesthetics, rename this function so it has namespace associated
with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:22 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: rename init_plx9080()
For aesthetics, rename this function so it has namespace associated
with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:21 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: rename hpdi_find_board()
For aesthetics, rename this function so it has namespace associated
with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:20 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: rename the (*auto_attach) and (*detach) functions
For aesthetics, rename these functions so they have namespace associated
with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:19 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: rename drain_dma_buffers()
For aesthetics, rename this function so it has namespace associated
with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:18 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: rename handle_interrupt()
For aesthetics, rename this function so it has namespace associated
with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:17 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: rename abort_dma()
For aesthetics, rename this function so it has namespace associated
with the driver.
Also, remove the unnecessary forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:16 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: rename hpdi_cancel()
For aesthetics, rename this function so it has namespace associated
with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:15 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: tidy up hpdi_cmd_test()
For aesthetics, rename this function so it has namespace associated
with the driver and move it so that it is not in the middle of the
interrupt support code.
Absorb the di_cmd_test() helper and tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:14 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: tidy up hpdi_cmd()
For aesthetics, rename this function so it has namespace associated
with the driver and move it so that it is not in the middle of the
interrupt support code.
Absorb the di_cmd() helper and tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:13 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: tidy up setup_dma_descriptors()
For aesthetics, rename this function so it has namespace associated
with the driver and move it so that it is not in the middle of the
async command support code.
Tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:12 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: tidy up dio_config_insn()
For aesthetics, rename this function so it has namespace associated
with the driver and move it so that it is not in the middle of the
async command support code.
Absorb the dio_config_block_size() helper function and remove the
forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:11 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: move the (*auto_attach) helper functions
For aesthetics, move a couple helper functions that are only called
by the (*auto_attach) closer to that function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:10 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: absorb setup_subdevices()
This function is only called by the (*auto_attach). Absorb it into that
function to clarify the attach and remove the need for some of the forward
declarations.
For aesthetics, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 21:16:09 +0000 (14:16 -0700)]
staging: comedi: gsc_hpdi: move the (*auto_attach) and (*detach) functions
Move these functions closer to the comedi_driver declaration. This removes
the need for one of the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 17:10:01 +0000 (10:10 -0700)]
staging: comedi: fl512: tidy up the multi-line comments
Tidy up the multi-line comments to follow the CodingStyle.
Add the GPL boilerplate comment found in other comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 17:10:00 +0000 (10:10 -0700)]
staging: comedi: fl512: tidy up fl512_ao_insn_read()
Tidy up this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 17:09:59 +0000 (10:09 -0700)]
staging: comedi: fl512: tidy up fl512_ao_insn_write()
Tidy up this function. Only save the last value written for readback.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 17:09:58 +0000 (10:09 -0700)]
staging: comedi: fl512: define the register map
Define the register map and remove the magic values and some unnecessary
comments.
For aesthetics, remove the 'iobase' local variable and use dev->iobase
directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 17:09:57 +0000 (10:09 -0700)]
staging: comedi: fl512: tidy up fl512_ao_insn_read()
For aesthetics, tidy up this function to match the style used in most
of the comedi drivers for analog output (*insn_read) functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 17:09:56 +0000 (10:09 -0700)]
staging: comedi: fl512: remove Fl512_SIZE define
This define is only used in the comedi_request_region() call to specify
the size of the I/O region to request. Remove the define and just open
code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 17:09:55 +0000 (10:09 -0700)]
staging: comedi: fl512: rename the subdevice (*insn_{read, write}) functions
For aesthetics, rename these functions and remove the unnecessary comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 13 Mar 2014 17:09:54 +0000 (10:09 -0700)]
staging: comedi: fl512: tidy up subdevice init
Remove the obvious comments and add some whitespace to the subdevice
init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 13 Mar 2014 15:30:39 +0000 (15:30 +0000)]
staging: comedi: 8255_pci: initialize MITE data window
According to National Instruments' PCI-DIO-96/PXI-6508/PCI-6503 User
Manual, the physical address in PCI BAR1 needs to be OR'ed with 0x80 and
written to register offset 0xC0 in the "MITE" registers (BAR0). Do so
during initialization of the National Instruments boards handled by the
"8255_pci" driver. The boards were previously handled by the
"ni_pcidio" driver, where the initialization was done by `mite_setup()`
in the "mite" module. The "mite" module comes with too much extra
baggage for the "8255_pci" driver to deal with so use a local, simpler
initialization function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.10.y, 3.11.y, 3.12.y, 3.13.y, 3.14.y
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 11 Mar 2014 19:04:17 +0000 (12:04 -0700)]
staging: comedi: dac02: introduce comedi driver for DAC02 boards
This board is currently supported by the poc driver. That driver used
to support a number of simple boards but now only provides support for
the DAC02 board.
Introduce a new comedi driver specifically for the DAC02 board. This
allows cleaning up all the cruft.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matei Oprea [Tue, 11 Mar 2014 12:39:12 +0000 (14:39 +0200)]
Staging: comedi: ni_daq_dio24: fix a line over 80 characters
Fix a coding style issue.
Signed-off-by: Matei Oprea <eu@opreamatei.ro>
Cc: ROSEdu Kernel Commmunity <firefly@lists.rosedu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:42 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: update the MODULE_DESCRIPTION
Change the generic MODULE_DESCRIPTION text to something more
specific for this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:41 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: tidy up the multi-line comments
Reformat the multi-line comments at the beginning of the code to
follow the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:40 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: add readback of last pwm channel values
Add and (*insn_read) for the PWM subdevice to allow reading back the
last value written to the channels.
There are only 2 PWM channels and they have a maxdata of 500. Pack
the last values in the subdevice 'state' instead of adding a private
data struct to this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:39 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: use comedi_offset_munge()
The value read from the encoders is in two's complement format. Use
the comedi_offset_munge() helper to convert the value to offset binary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:38 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: consolidate the board_init()
For aesthetics, rename this function so it has namespace associated
with the driver.
Absorb the c6xdigio_pwm_init() and c6xdigio_encoder_reset() helpers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:37 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: tidy up subdevice 1 init
Remove the commented out init of the 'trig'.
For aesthetics, add some whitespace to the init and rename the 'insn_read'
function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:36 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: tidy up subdevice 0 init
This subdevice is a PWM output not and analog output, fix the 'type'.
Fix the subdevice 'range', range_bipolar does not make sense for a PWM
output. The range_unknown is a better choice.
Remove the commented out init of the 'trig'.
For aesthetics, add some whitespace to the init and rename the 'insn_write'
function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:35 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: define the data register bits
To clarify the code, define the bits in the data register and remove the
magic numbers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:34 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: tidy up c6xdigio_pwm_write()
The 10-bit pwm value (2-498) is written by banging 2-bits in the data register.
Refactor this function to remove the need for the union pcmcmdtype and struct
pwmbitstype.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:33 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: introduce c6xdigio_get_encoder_bits()
The 24-bit encoder value is read using 3-bits in the status register. The
data register is banged between each read of the status register to advance
the bits.
Introduce a helper function to handle this and remove the union encvaluetype
and struct encbitsbyte.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:32 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: define the register map
The register map was already defined but it was not being used. Rename
to defines and use them in the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:31 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: introduce c6xdigio_write_data()
All writes to the hardware involve writing the the data register then
checking the status register. Introduce a helper function to handle this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:30 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: change first param to c6xdigio_chk_status()
For aesthetics, pass the comedi_device pointer instead of the dev->iobase
as the first parameter.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:29 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: tidy up C6X_encInput()
Rename the CamelCase function.
For aesthetics, pass the comedi_device pointer instead of the dev->iobase
as the first parameter.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:28 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: tidy up C6X_pwmOutput()
Rename the CamelCase function.
For aesthetics, pass the comedi_device pointer instead of the dev->iobase
as the first parameter.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:27 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: tidy up C6X_encResetAll()
Rename the CamelCase function.
For aesthetics, pass the comedi_device pointer instead of the dev->iobase.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:26 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: tidy up C6X_pwmInit()
Rename the CamelCase function.
For aesthetics, pass the comedi_device pointer instead of the dev->iobase.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:25 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: factor out status check busywait
Factor out the common code that busywaits for the status to change.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:24 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: remove C6XDIGIO_SIZE
This define is only used in the comedi_request_region() call and does
not add any additional clarity to the code. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 10 Mar 2014 21:07:23 +0000 (14:07 -0700)]
staging: comedi: c6xdigio: remove WriteByteToHwPort()
This CamelCase function is just a wrapper around outb_p(). Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.044945 seconds and 5 git commands to generate.