staging: lustre: llite: remove comment from ll_dir_read

Remove comment about fixing swabbing that is not needed.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: add md_op_data parameter to ll_get_dir_page

Pass in struct md_op_data for ll_get_dir_page function.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: aim-network: fix interrupt unsafe spinlocks

The networking AIM does not use the *_irqsave and *_irqrestore flavored
spinlock functions. The rx_completion callback, however, can be called
from an interrupt context.

This patch is needed to fix this problem.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: ion: ion_test.c: fix parenthesis alignment

This fixes the checkpatch.pl "Alignment should match open parenthesis"
issues in ion_test.c.

Signed-off-by: Ben LeMasurier <ben@crypt.ly>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: ion: ion_heap.c: fix parenthesis alignment

This fixes the checkpatch.pl "Alignment should match open parenthesis"
issues in ion_heap.c.

Signed-off-by: Ben LeMasurier <ben@crypt.ly>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: dim2-hdm: introduce function dim2_transfer_madr

This patch removes duplicated code by putting it into the new function
dim2_transfer_madr.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: dim2-hdm: initialize DBR memory of synchronous channels

In the time after a synchronous DIM2 channel is enabled and before the
first buffer travels this channel, the DIM2 macro is babbling random
random data to the network.

This patch initializes the internal DBR memory of the DIM2 that is used
to transfer the synchronous data.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorinput: make lock_visor_dev a mutex

Since lock_visor_dev is a binary semaphore it makes more sense to
use a mutex lock.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorinput: ensure proper locking wrt creation & ints

Ensure we properly lock between visorinput_channel_interrupt(),
visorinput_open(), and devdata_create().  We now guarantee that:

* interrupts will be disabled and remain disabled during device creation,
  by setting 'paused = true' across device creation

* we canNOT get into visorinput_open() until the device structure is
  totally initialized, by delaying the input_register_device() until the
  end of device initialization

We also now ensure that lock_visor_dev is held across updates of devdata
state, to ensure state consistency.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Move vbushelper.h to visorbus directory

Only visorbus needs this header file so move it to visorbus
directory.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: fix visorbus_private.h comments

This patch ONLY touches comment lines, i.e., NO executable code is
affected.

Comments were fixed in visorbus_private.h:
* Minor typos were corrected.
* Useless comments were removed.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Rename function to follow existing convention

Renames visorchipset_device_pause_response to device_pause_response,
thereby following the convention that other responder functions follow.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Remove notifier-related code from visorbus

When this functionality was first implemented, visorchipset and visorbus
were separate drivers, which necessitated a registration mechanism for
them to communicate.  More-recently, visorchipset and visorbus were
combined into a single driver, and now exist as separate source files
within the same driver, known as 'visorbus'.  This eliminated the need
for a registration mechanism, but it has remained nevertheless until now.
For the sake of simplification, this registration mechanism is now being
removed.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: rectify kerneldoc comment for struct

Fixes the kerneldoc comment for struct visor_device - the struct members
were not listed with the appropriate @ prefix.

Signed-off-by: David Binder <david.binder@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Move visorbus-unique functions to private header

Moves function prototypes that are unique to visorbus from
include/visorbus.h to visorbus/visorbus_private.h.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Rectify commenting in visorchipset.c

Adds kerneldoc formatting to appropriate functions. Other multi-line
comments now use proper formatting.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: fix visorchannel.c comments

This patch ONLY touches comment lines, i.e., NO executable code is
affected.

Comments were fixed in visorchannel.c:
* All functions worthy of documenting now use standard kerneldoc
  formatting.
* Multi-line comments were tweaked so as to use appropriate conventions.
* Minor typos were corrected.
* Useless comments were removed.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: David Binder <david.binder@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: fix commenting in visorbus_main.c

This patch ONLY touches comment lines, i.e., NO executable code is
affected.

* All functions worthy of documenting now use standard kerneldoc
  formatting.
* Improper uses of kerneldoc formatting were converted to standard
  multi-line comments.
* Multi-line comments were tweaked so as to use appropriate conventions.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: fix commenting in vbusdevinfo.h

This patch ONLY touches comment lines, i.e., NO executable code is
affected.

* All functions worthy of documenting now use standard kerneldoc
  formatting.
* Multi-line comments were tweaked so as to use appropriate conventions.
* Minor typos were corrected.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: remove unused parameter from function

The off parameter to visorchannel_create_guts() was never used, so it was
removed.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove reference to unused STANDALONE_CLIENT

The STANDALONE_CLIENT define is no longer used by Unisys driver code.

Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Remove unused functions

Remove visorbus_clear_channel, visorchannel_signalqueue_slots_avail,
visorchannel_signalqueue_max_slots, visorchannel_clear, and
visorchannel_debug which are no longer called by any driver.

Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Remove unnecessary EXPORT_SYMBOL statements

The driver that is now visorbus started out as multiple separate drivers,
and when they were merged the EXPORT_SYMBOL statements that were required
for separate drivers were left in the code. This patch removes those now
unnecessary exports.

Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Make visordriver_callback_lock a mutex

visordriver_callback_lock is just a binary semaphore that logically
makes more sense as a mutex.

Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: remove periodic_work.h/.c

These files were made no-longer-necessary by recent commits.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: use kernel timer instead of workqueue

A kernel timer is now used as the vehicle to periodically call the
channel_interrupt function of registered visor drivers, instead of a
workqueue.

This simplifies a lot of things by making periodic_work.c and
periodic_work.h no longer necessary.  This change also means that the
channel_interrupt() callbacks registered by visor drivers (via
visorbus_register_visor_driver()) will now be called in atomic context
(i.e., canNOT sleep) rather than kernel thread context (CAN sleep).
Fortunately this did NOT necessitate any change to the existing
channel_interrupt() callbacks, because none of them ever perform any
operations that would be invalid in atomic context.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorinput: remove unnecessary locking

Locking in the _interrupt() function is NOT necessary so long as we ensure
that interrupts have been stopped whenever we need to pause or resume the
device, which we now do.

While a device is paused, we ensure that interrupts stay disabled, i.e.
that the _interrupt() function will NOT be called, yet remember the desired
state in devdata->interrupts_enabled if open() or close() are called are
called while the device is paused.  Then when the device is resumed, we
restore the actual state of interrupts (i.e., whether _interrupt() is going
to be called or not) to the desired state in devdata->interrupts_enabled.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: removed unused periodic_test_workqueue

periodic_test_workqueue was an unused relic from the past, and was removed.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: include: Remove thread-related enum members

Code relating to ktheads was previously removed from s-Par driver code.
This patch cleans up lingering remnants of kthreads by removing thread-
related enum types.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: Correct comment spelling mistake

Fixes a comment spelling mistake in visornic.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: modify format string to match argument

Modifies the format string of snprintf to expect an unsigned int
instead of a signed one, per the supplied argument.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: remove unused struct

Removes unused struct definition, channel_size_info, in response to
findings by SonarQube.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: remove unused module parameters

Removes unused module parameters from visorbus_main.c, in response to
findings by SonarQube.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: check parahotplug_request_complete_result

This patch modifies the caller of parahotplug_request_complete()
to check the return value and return appropriate result.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: remove return values for write_vbus functions

This patch removes the return values from the write_vbus_* channel
functions. Nobody was checking the return values and the value stored
into the vbus info is not critical to the functioning of the device.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: reduce context of list_del mutex

This patch reduces context of the list_del mutex for the function
hdm_enqueue().

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: core: rename device struct of core module

This patch gives the struct device variable of the core a more meaningful
name.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: core: remove debug print

This patch removes the debug print in case an HDM ran out of rx buffers.
This is not needed since the status is reflected in the sysfs
channel_starving flag. Additionally, it prevents the system form slowing
down.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: dim2-hdm: fix possible kernel freeze when reusing a dim2 channel

If a DIM2 channel is being closed while it is busy, the channels's status
flag could possibly stay active for this very channel. This causes the
kernel to freeze by the time the channel is opened again.

This patch fixes the problem.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: dim2-hdm: add configuration for fcnt

This patch adds possibility to configure the DIM2-IP parameter
representing the number of frames per sub-buffer for synchronous
channels.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: dim2-hdm: fix race condition when closing a channel

This patch fixes race between the function poison_channel that clears
the state is_initialized and the tasklet function dim2_tasklet_fn that
checks the state is_initialized.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: v4l2-aim: remove unnecessary spaces

This patch removes the unnecessary spaces.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: v4l2-aim: remove unnecessary label err_vbi_dev

For optimization purposes this patch removes the label err_vbi_dev.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: v4l2-aim: remove unnecessary retval

The function aim_register_videodev() uses the variables 'ret' and
'retval' to represent the same value.

This patch removes 'retval' and replaces it with 'ret'. Further, it
replaces the constant return value '-ENODEV' with the result returned by
function video_register_device() in the event something went wrong.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: v4l2-aim: replace pr_xx calls by v4l2_xx calls

This patch replaces pr_info, pr_err, etc. function calls by the
v4l2_... ones to get the device dependent logs.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: v4l2-aim: assign unique names to devices

The current V4L2 AIM implementation assigns to all video devices and to
all V4L devices the same names.

This patch makes use of hardware dependent names for the video devices and
allows the user to choose the names for the V4L devices.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: v4l2-aim: optimize list_for_each_entry_safe

As the function get_aim_dev() does not delete elements of the list, the
use of macro list_for_each_entry_safe is not necessary.

This patch replaces the macro list_for_each_entry_safe with the macro
list_for_each_entry.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: v4l2-aim: fix interrupt unsafe spinlocks

The functions get_aim_dev() and aim_rx_data() are using interrupt unsafe
spinlocks even though they may be called from an interrupt context.

This patch fixes the described problem.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: ensure we do not overrun synths array

synth_add allows one to add MAXSYNTHS synths to the synths array;
however it always NULLifies the next synth in the array which
means that on the MAXSYNTHS synth we get an out-of-bounds write of
the NULL to the synths array.  Make the synths array MAXSYNTHS + 1
elements in size to allow for the final NULL sentinal to avoid the
out-of-bounds write.

Issue found wit CoverityScan, CID#744671

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: speakup: Remove space after cast

Fix the checkpatch.pl warning "No space is necessary after a cast".

Signed-off-by: Laurence Rochfort <laurence.rochfort@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove useless variable 'ch_intr_rx'

The 'ch_intr_rx' variable was used only for increasing.
So the 'ch_intr_rx' variable is not useful for this driver.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove useless variable 'ch_intr_tx'

The 'ch_intr_tx' variable was used only for increasing.
So the 'ch_intr_tx' variable is not useful for this driver.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove useless variable 'ch_intr_modem'

The 'ch_intr_modem' variable was used only for increasing.
So the 'ch_intr_modem' variable is not useful for this driver.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove useless variable 'intr_rx'

The 'intr_rx' variable was used only for increasing.
So the 'intr_rx' variable is not useful for this driver.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove useless variable 'intr_tx'

The 'intr_tx' variable was used only for increasing.
So the 'intr_tx' variable is not useful for this driver.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove unused variable 'intr_modem'

The 'intr_modem' variable was used only for increasing.
So the 'intr_modem' variable is not useful for this driver.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant null check in

the "brd" was already checked for NULL before calling dgnc_do_remap().

the dgnc_do_remap() function was called only
from the dgnc_found_board() and the DGNC_BOARD_MAGIC value
was assigned to "brd->magic" in dgcn_found_board(). So it doesn't
need to check about magic value.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove useless variable 'intr_count'

The 'intr_count' variable was used only for increasing.
So the 'intr_count' variable is not useful for this driver.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant NULL check for brd

the "brd" value cannot be NULL in dgnc_finalize_board_init().
Because "brd" as a parameter of this function was already
checked for NULL.

the dgnc_finalize_board_init() as a static function was called
only from dgnc_found_board() function and brd->magic value
was assigned once in dgnc_found_board(). So it doesn't need to
check for DGNC_BOARD_MAGIC value.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: re-arrange functions for removing

Re-arrange the functions for removing forward declarations in dgnc_cls.c file.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: removes redundant null check and change

The dgnc_set_modem_info() used only channel_t variable.
Any other variables were used only for checking NULL.

So fist parameter changed from "tty_struct" to "channel_t" and
useless NULL checks and variables are removed.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant variable null check

The unit struct(un_t) was not used in dgnc_tty_hangup().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant local variable for

The local variable "bd" was not used in dgnc_carrier() function.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove useless error value assignment

The "result" variable in dgnc_get_mstat() was initialized with
"-EIO". But if the "ch" is not null, "result" will be set to zero
and if the "ch" is null, dgnc_get_mstat() will return "-ENXIO" as
an error. So "-EIO" error value was useless in dgnc_get_mstat().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant NULL checks in

The dgnc_block_til_ready() is only used in dgnc_tty_open().
The unit data(struct un_t) was stored into tty->driver_data in dgnc_tty_open().
And also tty and un were tested about NULL so these variables doesn't
need to check for NULL in dgnc_block_til_ready().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: add __exit macro to dgnc_driver.c

Add the __exit macro to the dgnc_cleanup_module(void) function
in dgnc_driver.c

Signed-off-by: Joshua Houghton <josh@awful.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: don't reinvent struct bio_vec

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: simplify the living hell out of ksocknal_lib_recv_kiov()

... by using ITER_BVEC recvmsg

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: switch lnet_sock_write() to sock_sendmsg()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: do post work for statahead in readdir case

Increase the post-work for the statahead thread in the readdir
case since it can become very busy.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: pass in __u64 pos for ll_dir_read

Some cases we want to preserve the ctx->pos value or use
a different value altogther. So allow the passing in of
a position offset to ll_dir_read.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: remove code never called

We have if (1) conditionals which is pointless so remove
it and the next code block is never called so remove that
as well.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: clarify some debug messages for statahead

Make some of the error reporting more clear for the statahead
thread startup and is_first_dirent() function.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: rename some variables for ll_dir_read

The variables api32 and hash64 was renamed to is_api32 and
is_hash64.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: change done flag in ll_dir_read to bool

Change the done flag from integer to bool.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: handle done flags differently in ll_dir_read

Invert the done flag test to reduce the code indentation.
If done is true release the page and break out of the
while loop.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: set next only when needed in ll_dir_read

The variable next needs only to be set when done is false.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: reduce indent in ll_dir_read

Instead of making a large chunk of code conditional
based on if a page is valid we reverse the page
validity test and exit the loop if the page is invalid
instead. This allows a section of code to reduce its
indentation one level.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: remove debug message in ll_dir_read

Remove debug message and struct ll_inode_info.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: pass struct md_op_data to ll_dir_read

Add struct md_op_data as a parameter to ll_dir_read.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: label the debug info

We report the inode size but never print in the debug
message that the number reported is the size.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: mdc: handle IT_READDIR operations

The readdir operations lock was incomplete. This
patch fills in the missing pieces.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lmv: add new lmv structures

Newer lustre version on metadata servers support different
version of lmv magic. This add the new data structures
to handle these new lmv magic versions.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: cache directory striping information

Cache directory striping information that the clients receive
from the metadata servers.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: remove wirecheck for struct lmv_stripe_md

Remove the wiretest check for this data structure.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd: rename struct lmv_stripe_md field mea to lmv

Rename struct lmv_stripe_md in struct lustre_md from mea
to lmv.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd: expand op_cli_flags

Add new flags for metadata handling. These flags are
related to DNE2 handling.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: basic port to xattr_handler API

Port the xattr functionality to the new xattr_handler API.
This is smallest changes needed to move to this new API. The
function ll_removexattr can be replaced by generic_removexattr
as well since it also uses the xattr_handler set xattr backend.
To tell the difference between the two cases we test the flag
passed in for XATTR_REPLACE. The ll_getxattr function is
replaced by the generic_getxattr function.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: Remove old commented out code

These #if 0 blocks have been in place for years. Assume
they are not used and remove them

Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8058
Reviewed-on: http://review.whamcloud.com/20414
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: break ll_getxattr_common into 2 functions

Split the function ll_getxattr_common into two functions.
The code used for listing xattrs and ll_getxattr_common is
placed into a new function ll_getxattr_list. This allows
ll_listxattr to call directly ll_getxattr_list instead of
going through ll_getxattr_common. This change is needed
for the upcoming VFS move xattr_handler from [s|g]etxattr.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

android: binder: Remove deprecated create_singlethread_workqueue

The workqueue is being used to run deferred work for the android binder.

The "binder_deferred_workqueue" queues only a single work item and hence
does not require ordering. Also, this workqueue is not being used on a
memory recliam path. Hence, the singlethreaded workqueue has been
replaced with the use of system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: fix 'line over 80 characters'

fix checkpatch.pl warning about 'line over 80 characters'.

Signed-off-by: Didik Setiawan <didik.swn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw_sync: de-stage SW_SYNC

SW_SYNC allows to run tests on the sync_file framework via debugfs on

<debugfs>/sync/sw_sync

Opening and closing the file triggers creation and release of a sync
timeline. To create fences on this timeline the SW_SYNC_IOC_CREATE_FENCE
ioctl should be used. To increment the timeline value use SW_SYNC_IOC_INC.

Also it exports Sync information on

<debugfs>/sync/info

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: add Doc for SW_SYNC ioctl interface

This interface is hidden from kernel headers and it is intended for use
only for testing. So testers would have to add the ioctl information
internally. This is to prevent misuse of this feature.

v2: take in Eric suggestions for the Documentation

v3: really take in Eric suggestions

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: prepare sw_sync files for de-staging

remove file paths in the comments and add short description about each
file.

v2: remove file paths instead of just change them.

v3: improve header description as sugggested by Eric

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: move trace/sync.h to sync_trace.h

The common behaviour for trace headers is to have them in the same folder
they are used, instead of creating a special trace/ directory.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: do not let userspace trigger WARN_ON

Closing the timeline without waiting all fences to signal is not
a critical failure, it is just bad usage from userspace so avoid
calling WARN_ON in this case.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Get rid of ion_reserve

ion_reserve was supposed to be used to reserve memory in board files.
These days, board files are no more and there are other more controlled
mechanisms for reserving memory. Get rid of this function.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Drop ion_carveout_allocate definitions

ion_carveout_allocate and ion_carveout_free aren't used outside of the
carveout heap. Get rid of the definitions.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Get rid of map_dma/unmap_dma

The map_dma API interface was designed to generate an sg_table.
Currently, every client just creates the table at allocation time and
then returns the one table. Nothing happens on unmap_dma either.
Just get rid of the API and assign the sg_table directly.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>