Ian Lance Taylor [Mon, 7 Apr 2008 22:16:03 +0000 (22:16 +0000)]
* configure.ac: Don't test for objdump, c++filt, or readelf.
* testsuite/Makefile.am: Remove READELF and OBJDUMP_AND_CPPFILT
conditionals.
(TEST_READELF): New variable.
(TEST_OBJDUMP, TEST_CXXFILT, TEST_STRIP): New variables.
(check_PROGRAMS): Add two_file_strip_test.
(two_file_strip_test): New target.
(check_PROGRAMS): Add two_file_same_shared_strip_test.
(two_file_same_shared_strip_test_SOURCES): New variable.
(two_file_same_shared_strip_test_DEPENDENCIES): New variable.
(two_file_same_shared_strip_test_LDFLAGS): New variable.
(two_file_same_shared_strip_test_LDADD): New variable.
(two_file_shared_strip.so): New target.
(ver_test_2.syms, ver_test_4.syms): Use TEST_READELF.
(ver_test_5.syms, ver_test_7.syms): Likewise.
(ver_matching_test.stdout): Use TEST_OBJDUMP and TEST_CXXFILT.
(strip_test_3.stdout): Use TEST_OBJDUMP.
* configure, Makefile.in, testsuite/Makefile.in: Rebuild.
Ian Lance Taylor [Mon, 7 Apr 2008 21:58:34 +0000 (21:58 +0000)]
* Makefile.def: check-gold depends upon all-binutils.
* Makefile.in: Regenerate.
H.J. Lu [Mon, 7 Apr 2008 21:29:50 +0000 (21:29 +0000)]
2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (PREFIX_VEX_38XX): Add a tab.
(PREFIX_VEX_3AXX): Likewis.
Doug Evans [Mon, 7 Apr 2008 19:29:55 +0000 (19:29 +0000)]
* buildsym.h (last_source_file): Add dwarf info to comment.
(last_source_start_addr): Ditto.
H.J. Lu [Mon, 7 Apr 2008 17:35:12 +0000 (17:35 +0000)]
2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Remove 4 extra blank lines.
Vladimir Prus [Mon, 7 Apr 2008 16:32:44 +0000 (16:32 +0000)]
Introduce test setup helpers.
* lib/gdb.exp (build_executable, clean_restart)
(prepare_for_testing): New.
* gdb.base/break.exp: Use prepare_for_testing, and clean_restart.
* gdb.base/return.exp: Likewise.
* gdb.base/ending-run.exp: Likewise.
H.J. Lu [Mon, 7 Apr 2008 14:38:25 +0000 (14:38 +0000)]
Add the missing ymm test in the last checkin.
Alan Modra [Mon, 7 Apr 2008 13:07:23 +0000 (13:07 +0000)]
* elf32-spu.c (allocate_spuear_stubs): Ensure _SPUEAR_ symbol
is defined in overlay section before creating a stub.
(build_spuear_stubs): Likewise.
(spu_elf_size_stubs, spu_elf_build_stubs): Adjust calls.
H.J. Lu [Mon, 7 Apr 2008 13:07:16 +0000 (13:07 +0000)]
gas/
2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (parse_real_register): Return AVX register
only if AVX is enabled.
gas/testsuite/
2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/att-regs.s: Add AVX register test.
* gas/i386/intel-regs.s: Likewise.
* gas/i386/att-regs.d: Updated.
* gas/i386/intel-regs.d: Likewise.
Pedro Alves [Mon, 7 Apr 2008 11:45:58 +0000 (11:45 +0000)]
* alphanbsd-tdep.c: Include "target.h".
* mn10300-tdep.c: Include "target.h".
* Makefile.in (alphanbsd-tdep.o, mn10300-tdep.o): Update.
Nick Clifton [Mon, 7 Apr 2008 08:08:35 +0000 (08:08 +0000)]
correctly regenerate configure
Nick Clifton [Mon, 7 Apr 2008 08:02:21 +0000 (08:02 +0000)]
oops - omitted from previous delta
Kaz Kojima [Mon, 7 Apr 2008 02:55:08 +0000 (02:55 +0000)]
PR gas/6043
* config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
* gas/sh/sh64/eh-1.d: New.
* gas/sh/sh64/eh-1.d: Likewise.
gdbadmin [Mon, 7 Apr 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 7 Apr 2008 00:00:05 +0000 (00:00 +0000)]
daily update
Nick Roberts [Sun, 6 Apr 2008 22:44:47 +0000 (22:44 +0000)]
*** empty log message ***
Nick Roberts [Sun, 6 Apr 2008 22:41:19 +0000 (22:41 +0000)]
New test for asynchronous Machine Interface (MI) responses.
Vladimir Prus [Sun, 6 Apr 2008 08:56:37 +0000 (08:56 +0000)]
Fix breakpoint condition that use member variables.
* valops.c (check_field): Remove.
(check_field_in): Rename to check_field.
(value_of_this): Use la_name_of_this.
* value.h (check_field): Adjust prototype.
* language.h (la_value_of_this): Rename to la_name_of_this.
* language.c (unknown_language_defn): Specify "this" for
name_of_this.
(auto_language_defn): Likewise.
(local_language_defn): Likewise.
* ada-lang.c (ada_language_defn): Adjust comment.
* c-lang.c (c_language_defn): Adjust comment.
(cplus_language_defn): Specify "this" for name_of_this.
(asm_language_defn): Adjust comment.
(minimal_language_defn): Adjust comment.
* f-lang.c (f_language_defn): Specify NULL for name_of_this.
* jv-lang.c (java_language_defn): Specify "this" for name_of_this.
* m2-lang.c (m2_language_defn): Specify "this" for name_of_this.
* objc-lang.c (objc_language_defn): Specify "self" for
name_of_this.
* p-lang.c (pascal_language_defn): Specify "this" for
name_of_this.
* scm-lang.c (scm_language_defn): Specify NULL for name_of_this.
* symtab.c (lookup_symbol_aux): Lookup "this" in the
proper scope, and check for field in type of "this", without
trying to create a value.
Alan Modra [Sun, 6 Apr 2008 00:00:07 +0000 (00:00 +0000)]
daily update
gdbadmin [Sun, 6 Apr 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Vladimir Prus [Sat, 5 Apr 2008 17:12:46 +0000 (17:12 +0000)]
* lib/mi-support.exp (mi_expect_stop): New.
(mi_run_cmd): Change the
token. Use mi_send_resuming_command, use
mi_expect_stop.
(mi_execute_to_helper): Rename to mi_execute_to.
(mi_send_resuming_command): Add more error patterns.
(mi_wait_for_stop): Renamed to...
(mi_get_stop_line): ...this.
(mi_run_inline_test): Adjust.
* gdb.mi/mi-cli.exp: Use mi_execute_to/mi_expect_stop.
* gdb.mi/mi-console.exp: Likewise.
* gdb.mi/mi-pending.exp: Likewise.
* gdb.mi/mi-simplerun.exp: Likewise.
* gdb.mi/mi-stack.exp: Likewise.
* gdb.mi/mi-stepi.exp: Likewise.
* gdb.mi/mi-syn-frame.exp: Add comment.
* gdb.mi/mi-until.exp: Likewise.
* gdb.mi/mi-var-display.exp: Likewise.
* gdb.mi/mi-watch.exp: Likewise.
* gdb.mi/mi2-cli.exp: Likewise.
* gdb.mi/mi2-console.exp: Likewise.
* gdb.mi/mi2-simplerun.exp: Likewise.
* gdb.mi/mi2-stack.exp: Likewise.
* gdb.mi/mi2-stepi.exp: Likewise.
* gdb.mi/mi2-until.exp: Likewise.
* gdb.mi/mi2-var-display.exp: Likewise.
* gdb.mi/mi2-watch.exp: Likewise.
gdbadmin [Sat, 5 Apr 2008 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Bob Wilson [Fri, 4 Apr 2008 23:25:49 +0000 (23:25 +0000)]
2008-04-04 Adrian Bunk <bunk@stusta.de>
Bob Wilson <bob.wilson@acm.org>
* config/tc-xtensa.c (xg_apply_fix_value): Check return code from
call to decode_reloc.
Alan Modra [Fri, 4 Apr 2008 23:00:06 +0000 (23:00 +0000)]
daily update
Ulrich Weigand [Fri, 4 Apr 2008 22:59:28 +0000 (22:59 +0000)]
* gdb.base/watch_thread_num.exp: Use gdb_compile_pthreads.
* gdb.cp/mb-templates.exp: Skip test on spu*-*-* targets.
Pedro Alves [Fri, 4 Apr 2008 21:59:25 +0000 (21:59 +0000)]
gdb/
2008-04-04 Pedro Alves <pedro@codesourcery.com>
* mi/mi-cmds.h (enum mi_cmd_result): Delete MI_CMD_ERROR.
(mi_error_message): Delete declaration.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Call error instead of
returning MI_CMD_ERROR.
* mi/mi-main.c (mi_error_message): Delete.
(mi_cmd_exec_interrupt):
(mi_cmd_thread_select, mi_cmd_thread_list_ids)
(mi_cmd_thread_info): Call error instead of returning
MI_CMD_ERROR.
(mi_cmd_data_list_register_values): Call error instead of
returning MI_CMD_ERROR. Adapt to new get_register interface.
(get_register): Change return typo to void. Call error instead of
returning MI_CMD_ERROR.
(mi_cmd_data_write_register_values): Call error instead of
returning MI_CMD_ERROR.
(mi_cmd_list_features): Return MI_CMD_DONE.
(captured_mi_execute_command): Remove MI_CMD_ERROR handling.
(mi_execute_command): Always print exceptions with -error.
gdb/testsuite/
2008-04-04 Pedro Alves <pedro@codesourcery.com>
* gdb.mi/mi-disassemble.exp, gdb.mi/mi-stack.exp,
gdb.mi/mi-syn-frame.exp, gdb.mi/mi-var-block.exp,
gdb.mi/mi-var-cmd.exp, gdb.mi/mi-var-display.exp,
gdb.mi/mi2-disassemble.exp, gdb.mi/mi2-stack.exp,
gdb.mi/mi2-syn-frame.exp, gdb.mi/mi2-var-block.exp,
gdb.mi/mi2-var-cmd.exp, gdb.mi/mi2-var-display.exp: Update to not
expect an mi error duplicated in stderr.
Ulrich Weigand [Fri, 4 Apr 2008 19:19:11 +0000 (19:19 +0000)]
* server.c (handle_query): Never return "unsupported" for
qXfer:features:read queries.
Cary Coutant [Fri, 4 Apr 2008 17:24:47 +0000 (17:24 +0000)]
2008-04-04 Cary Coutant <ccoutant@google.com>
* symtab.h (Symbol::is_weak_undefined): New function.
(Symbol::is_strong_undefined): New function.
(Symbol::is_absolute): New function.
(Symbol::needs_plt_entry): Exclude weak undefined symbols.
(Symbol::needs_dynamic_reloc): Exclude weak undefined and
absolute symbols.
* testsuite/Makefile.am (check_PROGRAMS): Add weak_undef_test.
(weak_undef_test): New target.
* testsuite/Makefile.in: Rebuild.
* testsuite/weak_undef_file1.cc: New file.
* testsuite/weak_undef_file2.cc: New file.
* testsuite/weak_undef_test.cc: New file.
H.J. Lu [Fri, 4 Apr 2008 16:34:23 +0000 (16:34 +0000)]
gas/
2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
* config/tc-i386.c (cpu_arch): Add .pclmul.
(md_show_usage): Replace clmul with pclmul.
* doc/c-i386.texi: Likewise.
gas/testsuite/
2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/arch-10-1.l: Replace CLMUL with PCLMUL.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/arch-10.s: Likewise.
* gas/i386/clmul-intel.d: Likewise.
* gas/i386/clmul.d: Likewise.
* gas/i386/clmul.s: Likewise.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/x86-64-clmul-intel.d: Likewise.
* gas/i386/x86-64-clmul.d: Likewise.
* gas/i386/x86-64-clmul.s: Likewise.
* gas/i386/arch-10.d: Replace clmul with pclmul.
* gas/i386/x86-64-arch-2.d: Likewise.
opcodes/
2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Replace CPU_CLMUL_FLAGS/CpuCLMUL
with CPU_PCLMUL_FLAGS/CpuPCLMUL.
(cpu_flags): Replace CpuCLMUL with CpuPCLMUL.
* i386-opc.tbl: Likewise.
* i386-opc.h (CpuCLMUL): Renamed to ...
(CpuPCLMUL): This.
(CpuFMA): Updated.
(i386_cpu_flags): Replace cpuclmul with cpupclmul.
* i386-init.h: Regenerated.
Joel Brobecker [Fri, 4 Apr 2008 15:51:15 +0000 (15:51 +0000)]
* NEWS: Mention new commands set/show multiple-symbols.
Nick Clifton [Fri, 4 Apr 2008 11:45:58 +0000 (11:45 +0000)]
PR binutils/4334
* acx.m4 (ACX_CHECK_CYGWIN_CAT_WORKS): New macro to check that
cygwin builds are not running in textmode.
* configure.ac: Run ACX_CHECK_CYGWIN_CAT_WORKS for cygwin hosted
builds.
* configure: Regenerate.
Nick Clifton [Fri, 4 Apr 2008 11:16:33 +0000 (11:16 +0000)]
PR other/35151
* configure.ac: Combine rules for mingw32 and mingw64.
* configure: Regenerate.
Nick Clifton [Fri, 4 Apr 2008 11:15:58 +0000 (11:15 +0000)]
PR other/35151
* configure.ac: Combine rules for mingw32 and mingw64.
* configure: Regenerate.
Nick Clifton [Fri, 4 Apr 2008 07:02:29 +0000 (07:02 +0000)]
* po/sk.po: Updated Slovak translation.
gdbadmin [Fri, 4 Apr 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Ian Lance Taylor [Thu, 3 Apr 2008 23:33:20 +0000 (23:33 +0000)]
* elfcpp_swap.h (Swap_unaligned<64, true>::writeval): Correct
byte order.
Alan Modra [Thu, 3 Apr 2008 23:00:05 +0000 (23:00 +0000)]
daily update
Joel Brobecker [Thu, 3 Apr 2008 21:51:12 +0000 (21:51 +0000)]
* gdb.texinfo (Breakpoint Menus): Delete. Contents moved inside
new node "Ambiguous Expressions". Replace references to this
node by references to "Ambiguous Expressions" throughout.
(Ambiguous Expressions): New node.
Joel Brobecker [Thu, 3 Apr 2008 21:42:33 +0000 (21:42 +0000)]
* gdb.cp/ovldbreak.cc: Add missing bodies for methods foo::foofunc.
* gdb.cp/ovldbreak.exp: Set multiple-symbols to "ask".
Add a couple of tests that verify the behavior when the new setting
is set to "cancel" and "all".
* gdb.cp/method2.exp, gdb.cp/templates.exp: Set multiple-symbols to
"ask" before we start the testing.
Joel Brobecker [Thu, 3 Apr 2008 21:39:16 +0000 (21:39 +0000)]
* symtab.c (multiple_symbols_ask, multiple_symbols_all)
(multiple_symbols_cancel): New constants.
(multiple_symbols_modes, multiple_symbols_mode): New static globals.
(multiple_symbols_select_mode): New function.
(_initialize_symtab): Add new set/show multiple-symbols commands.
* symtab.h (multiple_symbols_ask, multiple_symbols_all)
(multiple_symbols_cancel, multiple_symbols_select_mode): Declare.
* ada-lang.c (user_select_syms): Add handling of new multiple-symbols
setting.
* linespec.c (decode_line_2): Likewise.
Doug Evans [Thu, 3 Apr 2008 18:19:16 +0000 (18:19 +0000)]
* symtab.h (enum free_code): Delete free_contents, unused.
* symmisc.c (free_symtab_block): Delete.
(free_symtab, case free_code): Delete.
Kai Tietz [Thu, 3 Apr 2008 14:44:55 +0000 (14:44 +0000)]
Kai Tietz <kai.tietz@onevision.com>
PR ld/6026
* pe-dll.c (make_head): Fix iat and thunk addend offset.
Ian Lance Taylor [Thu, 3 Apr 2008 14:18:37 +0000 (14:18 +0000)]
* compressed_output.h (class Output_compressed_section): Use
unsigned buffer.
* compressed_output.cc (zlib_compress): Use unsigned buffers,
add zlib header.
(zlib_compressed_suffix): Removed.
(Output_compressed_section::set_final_data_size): Use unsigned
buffers.
* testsuite/Makefile.am (flagstest_compress_debug_sections):
Fix linker invocation.
(flagstest_o_specialfile_and_compress_debug_sections):
Likewise.
* testsuite/Makefile.in: Regenerated.
H.J. Lu [Thu, 3 Apr 2008 14:03:21 +0000 (14:03 +0000)]
binutils/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* dwarf.c (dwarf_regnames_i386): Add AVX registers.
(dwarf_regnames_x86_64): Likewise.
gas/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
* doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
Document -msse2avx, .avx, .aes, .clmul and .fma.
* config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
(vex_prefix): Likewise.
(sse2avx): Likewise.
(CPU_FLAGS_ARCH_MATCH): Likewise.
(CPU_FLAGS_64BIT_MATCH): Likewise.
(CPU_FLAGS_32BIT_MATCH): Likewise.
(CPU_FLAGS_PERFECT_MATCH): Likewise.
(regymm): Likewise.
(vex_imm4): Likewise.
(fits_in_imm4): Likewise.
(build_vex_prefix): Likewise.
(VEX_check_operands): Likewise.
(bad_implicit_operand): Likewise.
(OPTION_MSSE2AVX): Likewise.
(T_YMMWORD): Likewise.
(_i386_insn): Add vex.
(cpu_arch): Add .avx, .aes, .clmul and .fma.
(cpu_flags_match): Changed to take a pointer to const template.
Enable encoding SSE instructions with VEX prefix for -msse2avx.
(match_mem_size): Also check ymmword.
(operand_type_match): Clear ymmword.
(md_begin): Allow '_' in mnemonic.
(type_names): Add OPERAND_TYPE_VEX_IMM4.
(process_immext): Update assert.
(md_assemble): Don't call process_immext if sse2avx and immext
are true. Call build_vex_prefix if vex is true.
(parse_insn): Updated for cpu_flags_match.
(swap_operands): Handle 5 operands.
(match_template): Handle 5 operands. Updated for cpu_flags_match.
Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
(process_suffix): Handle YMMWORD_MNEM_SUFFIX.
(check_byte_reg): Check regymm.
(process_operands): Duplicate the destination register for
-msse2avx if needed.
(build_modrm_byte): Updated for instructions with VEX encoding.
(output_insn): Output VEX prefix if needed.
(md_longopts): Add msse2avx.
(md_parse_option): Handle OPTION_MSSE2AVX.
(md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
(intel_e09): Support YMMWORD.
(intel_e11): Likewise.
(intel_get_token): Likewise.
gas/testsuite/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run aes, aes-intel, x86-64-aes,
x86-64-aes-intel, avx, avx-intel, inval-avx, x86-64-avx,
x86-64-avx-intel and x86-64-inval-avx.
* gas/cfi/cfi-i386.s: Add tests for AVX register maps.
* gas/cfi/cfi-x86_64.s: Likewise.
* gas/i386/aes.d: New.
* gas/i386/aes.s: Likewise.
* gas/i386/aes-intel.d: Likewise.
* gas/i386/avx.d: Likewise.
* gas/i386/avx.s: Likewise.
* gas/i386/avx-intel.d: Likewise.
* gas/i386/clmul.d: Likewise.
* gas/i386/clmul-intel.d: Likewise.
* gas/i386/clmul.s: Likewise.
* gas/i386/i386.exp: Likewise.
* gas/i386/inval-avx.l: Likewise.
* gas/i386/inval-avx.s: Likewise.
* gas/i386/sse2avx.d: Likewise.
* gas/i386/sse2avx.s: Likewise.
* gas/i386/x86-64-aes.d: Likewise.
* gas/i386/x86-64-aes.s: Likewise.
* gas/i386/x86-64-aes-intel.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.
* gas/i386/x86-64-avx.s: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.
* gas/i386/x86-64-clmul.d: Likewise.
* gas/i386/x86-64-clmul-intel.d: Likewise.
* gas/i386/x86-64-clmul.s: Likewise.
* gas/i386/x86-64-inval-avx.l: Likewise.
* gas/i386/x86-64-inval-avx.s: Likewise.
* gas/i386/x86-64-sse2avx.d: Likewise.
* gas/i386/x86-64-sse2avx.s: Likewise.
* gas/i386/arch-10.s: Add tests for AVX, AES, CLMUL and FMA.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/rexw.s: Add AVX tests.
* gas/i386/x86-64-opcode-inval.s: Remove lds/les test.
* gas/cfi/cfi-i386.d: Updated.
* gas/cfi/cfi-x86_64.d: Likewise.
* gas/i386/arch-10.d: Likewise.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/rexw.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.
include/opcode/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (MAX_OPERANDS): Set to 5.
(MAX_MNEM_SIZE): Changed to 20.
opcodes/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_E_register): New.
(OP_E_memory): Likewise.
(OP_VEX): Likewise.
(OP_EX_Vex): Likewise.
(OP_EX_VexW): Likewise.
(OP_XMM_Vex): Likewise.
(OP_XMM_VexW): Likewise.
(OP_REG_VexI4): Likewise.
(PCLMUL_Fixup): Likewise.
(VEXI4_Fixup): Likewise.
(VZERO_Fixup): Likewise.
(VCMP_Fixup): Likewise.
(VPERMIL2_Fixup): Likewise.
(rex_original): Likewise.
(rex_ignored): Likewise.
(Mxmm): Likewise.
(XMM): Likewise.
(EXxmm): Likewise.
(EXxmmq): Likewise.
(EXymmq): Likewise.
(Vex): Likewise.
(Vex128): Likewise.
(Vex256): Likewise.
(VexI4): Likewise.
(EXdVex): Likewise.
(EXqVex): Likewise.
(EXVexW): Likewise.
(EXdVexW): Likewise.
(EXqVexW): Likewise.
(XMVex): Likewise.
(XMVexW): Likewise.
(XMVexI4): Likewise.
(PCLMUL): Likewise.
(VZERO): Likewise.
(VCMP): Likewise.
(VPERMIL2): Likewise.
(xmm_mode): Likewise.
(xmmq_mode): Likewise.
(ymmq_mode): Likewise.
(vex_mode): Likewise.
(vex128_mode): Likewise.
(vex256_mode): Likewise.
(USE_VEX_C4_TABLE): Likewise.
(USE_VEX_C5_TABLE): Likewise.
(USE_VEX_LEN_TABLE): Likewise.
(VEX_C4_TABLE): Likewise.
(VEX_C5_TABLE): Likewise.
(VEX_LEN_TABLE): Likewise.
(REG_VEX_XX): Likewise.
(MOD_VEX_XXX): Likewise.
(PREFIX_0F38DB..PREFIX_0F38DF): Likewise.
(PREFIX_0F3A44): Likewise.
(PREFIX_0F3ADF): Likewise.
(PREFIX_VEX_XXX): Likewise.
(VEX_OF): Likewise.
(VEX_OF38): Likewise.
(VEX_OF3A): Likewise.
(VEX_LEN_XXX): Likewise.
(vex): Likewise.
(need_vex): Likewise.
(need_vex_reg): Likewise.
(vex_i4_done): Likewise.
(vex_table): Likewise.
(vex_len_table): Likewise.
(OP_REG_VexI4): Likewise.
(vex_cmp_op): Likewise.
(pclmul_op): Likewise.
(vpermil2_op): Likewise.
(m_mode): Updated.
(es_reg): Likewise.
(PREFIX_0F38F0): Likewise.
(PREFIX_0F3A60): Likewise.
(reg_table): Add REG_VEX_71...REG_VEX_73 and REG_VEX_AE.
(prefix_table): Add PREFIX_0F38DB..PREFIX_0F38DF, PREFIX_0F3ADF
and PREFIX_VEX_XXX entries.
(x86_64_table): Use VEX_C4_TABLE and VEX_C5_TABLE.
(three_byte_table): Use PREFIX_0F38DB..PREFIX_0F38DF and
PREFIX_0F3ADF.
(mod_table): Use VEX_C4_TABLE, VEX_C5_TABLE and VEX_LEN_TABLE.
Add MOD_VEX_XXX entries.
(ckprefix): Initialize rex_original and rex_ignored. Store the
REX byte in rex_original.
(get_valid_dis386): Handle the implicit prefix in VEX prefix
bytes and USE_VEX_LEN_TABLE/USE_VEX_C4_TABLE/USE_VEX_C5_TABLE.
(print_insn): Set need_vex/need_vex_reg/vex_i4_done to 0 before
calling get_valid_dis386. Use rex_original and rex_ignored when
printing out REX.
(putop): Handle "XY".
(intel_operand_size): Handle VEX, xmm_mode, xmmq_mode and
ymmq_mode.
(OP_E_extended): Updated to use OP_E_register and
OP_E_memory.
(OP_XMM): Handle VEX.
(OP_EX): Likewise.
(XMM_Fixup): Likewise.
(CMP_Fixup): Use ARRAY_SIZE.
* i386-gen.c (cpu_flag_init): Add CpuAES, CPU_CLMUL_FLAGS,
CPU_FMA_FLAGS and CPU_AVX_FLAGS.
(operand_type_init): Add OPERAND_TYPE_REGYMM and
OPERAND_TYPE_VEX_IMM4.
(cpu_flags): Add CpuAVX, CpuAES, CpuCLMUL and CpuFMA.
(opcode_modifiers): Add Implicit1stXmm0, Vex, Vex256, VexNDD,
VexNDS, VexW0, VexW1, Vex0F, Vex0F38, Vex0F3A, Vex3Sources,
VexImmExt and SSE2AVX.
(operand_types): Add RegYMM, Ymmword and Vex_Imm4.
* i386-opc.h (CpuAVX): New.
(CpuAES): Likewise.
(CpuCLMUL): Likewise.
(CpuFMA): Likewise.
(Vex): Likewise.
(Vex256): Likewise.
(VexNDS): Likewise.
(VexNDD): Likewise.
(VexW0): Likewise.
(VexW1): Likewise.
(Vex0F): Likewise.
(Vex0F38): Likewise.
(Vex0F3A): Likewise.
(Vex3Sources): Likewise.
(VexImmExt): Likewise.
(SSE2AVX): Likewise.
(RegYMM): Likewise.
(Ymmword): Likewise.
(Vex_Imm4): Likewise.
(Implicit1stXmm0): Likewise.
(CpuXsave): Updated.
(CpuLM): Likewise.
(ByteOkIntel): Likewise.
(OldGcc): Likewise.
(Control): Likewise.
(Unspecified): Likewise.
(OTMax): Likewise.
(i386_cpu_flags): Add cpuavx, cpuaes, cpuclmul and cpufma.
(i386_opcode_modifier): Add implicit1stxmm0, vex, vex256,
vexnds, vexndd, vexw0, vexw1, vex0f, vex0f38, vex0f3a,
vex3sources, veximmext and sse2avx.
(i386_operand_type): Add regymm, ymmword and vex_imm4.
* i386-opc.tbl: Add AES, CLMUL, AVX and FMA new instructions.
* i386-reg.tbl: Add AVX registers, ymm0..ymm15.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
David S. Miller [Thu, 3 Apr 2008 04:18:53 +0000 (04:18 +0000)]
* dwarf_reader.cc (Sized_dwarf_line_info::read_header_prolog,
Sized_dwarf_line_info::process_one_opcode): Use Swap_unaligned.
Ian Lance Taylor [Thu, 3 Apr 2008 00:33:37 +0000 (00:33 +0000)]
* TODO: New file.
gdbadmin [Thu, 3 Apr 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 2 Apr 2008 23:00:06 +0000 (23:00 +0000)]
daily update
Ian Lance Taylor [Wed, 2 Apr 2008 20:58:21 +0000 (20:58 +0000)]
* fileread.cc (File_read::find_view): Add byteshift and vshifted
parameters. Update for new key type to views_. Change all
callers.
(File_read::read): Adjust for byteshift in returned view.
(File_read::add_view): New function, broken out of
find_and_make_view.
(File_read::make_view): New function, broken out of
find_and_make_view.
(File_read::find_or_make_view): Add offset and aligned
parameters. Rewrite accordingly. Change all callers.
(File_read::get_view): Add offset and aligned parameters. Adjust
for byteshift in return value.
(File_read::get_lasting_view): Likewise.
* fileread.h (class File_read): Update declarations.
(class File_read::View): Add byteshift_ field. Add byteshift to
constructor. Add byteshift method.
* archive.h (Archive::clear_uncached_views): New function.
(Archive::get_view): Add aligned parameter. Change all callers.
* object.h (Object::get_view): Add aligned parameter. Change all
callers.
(Object::get_lasting_view): Likewise.
* fileread.cc (File_read::release): Don't call clear_views if
there are multiple objects.
* fileread.h (File_read::clear_uncached_views): New function.
* archive.cc (Add_archive_symbols::run): Call clear_uncached_views
on the archive.
gdbadmin [Wed, 2 Apr 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 1 Apr 2008 23:52:00 +0000 (23:52 +0000)]
* elf32-spu.c (insert_callee): Reorder call list so most recent
call is always first.
(interesting_section): Move.
(mark_functions_via_relocs): Fold interesting_section and
reloc_count tests in callers to here. Simplify output section
owner test.
(discover_functions): Set "gaps" when no symbols and some
"interesting_section". Run pasted_function loop for no symbol
bfds.
(for_each_node, transfer_calls): New functions.
(mark_non_root): Adjust to suit for_each_node.
(call_graph_traverse): Likewise. Fix memory leak. Rename to..
(remove_cycles): ..this.
(build_call_tree): Use for_each_node and transfer_calls.
(struct _sum_stack_param): New.
(sum_stack): Adjust to suit for_each_node. Return error on
malloc failure. Move code to print root node cumulative stack from..
(spu_elf_stack_analysis): ..here. Use for_each_node.
Alan Modra [Tue, 1 Apr 2008 23:00:07 +0000 (23:00 +0000)]
daily update
Cary Coutant [Tue, 1 Apr 2008 20:57:36 +0000 (20:57 +0000)]
2008-03-31 Cary Coutant <ccoutant@google.com>
Add thin archive support.
* archive.cc (Archive::armagt): New const.
(Archive::setup): Remove task parameter and calls to unlock.
(Archive::unlock_nested_archives): New function.
(Archive::read_header): Add nested_off parameter. Change
all callers.
(Archive::interpret_header): Likewise.
(Archive::include_all_members): Change to handle thin
archives.
(Archive::include_member): Likewise.
* archive.h (Archive::Archive): Add new parameters and
initializers.
(Archive::armagt): New const.
(Archive::setup): Remove task parameter.
(Archive::unlock_nested_archives): New function.
(Archive::read_header): Add nested_off parameter.
(Archive::interpret_header): Likewise.
(Archive::Nested_archive_table): New typedef.
(Archive::is_thin_archive_): New field.
(Archive::nested_archives_): New field.
(Archive::options_): New field.
(Archive::dirpath_): New field.
(Archive::task_): New field.
* readsyms.cc (Read_symbols::do_read_symbols): Add check
for thin archives. Pass additional parameters to
Archive::Archive. Unlock the archive file after calling
Archive::setup.
Aleksandar Ristovski [Tue, 1 Apr 2008 18:05:13 +0000 (18:05 +0000)]
* gdb.cp/casts.cc: Add class reference variables.
* gdb.cp/casts.exp: New test cases for up/down casting references.
Aleksandar Ristovski [Tue, 1 Apr 2008 16:16:43 +0000 (16:16 +0000)]
* gdb.cp/casts.cc: Add class reference variables.
* gdb.cp/casts.exp: New test cases for up/down casting references.
Aleksandar Ristovski [Tue, 1 Apr 2008 16:12:49 +0000 (16:12 +0000)]
* valops.c (value_cast_structs): New function. Cast related
STRUCT types up/down and return cast value. The body of this
function comes mostly from value_cast_pointers.
(value_cast_pointers): Code for actual cast STRUCT-STRUCT moved
to value_cast_structs. Now value_cast_pointers needs only create
appropriate reference after using value_cast_structs for actual
casting.
(value_cast): Handle references.
Marc Khouzam [Tue, 1 Apr 2008 15:18:30 +0000 (15:18 +0000)]
2008-04-01 Marc Khouzam <marc.khouzam@ericsson.com>
* gdb.mi/mi-var-display.exp: Stop at end of do_special_tests
instead of beginning to make an extra test pass.
* gdb.mi/mi2-var-display.exp: Likewise.
Marc Khouzam [Tue, 1 Apr 2008 15:15:07 +0000 (15:15 +0000)]
2008-04-01 Marc Khouzam <marc.khouzam@ericsson.com>
* MAINTAINERS: Added myself to section Write After Approval.
gdbadmin [Tue, 1 Apr 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 31 Mar 2008 23:44:47 +0000 (23:44 +0000)]
PR 6006
* archive.c (_bfd_slurp_extended_name_table): Change
ARFMAG[0] to ARFMAG[1].
(_bfd_construct_extended_name_table): Likewise.
Alan Modra [Mon, 31 Mar 2008 23:00:05 +0000 (23:00 +0000)]
daily update
DJ Delorie [Mon, 31 Mar 2008 18:11:50 +0000 (18:11 +0000)]
merge from gcc
Daniel Jacobowitz [Mon, 31 Mar 2008 14:02:26 +0000 (14:02 +0000)]
* elfxx-mips.c (mips_elf_record_got_page_entry): Update comment.
(_bfd_mips_elf_check_relocs): Update comments. Always call
mips_elf_record_got_page_entry for R_MIPS_GOT_PAGE.
Maciej W. Rozycki [Mon, 31 Mar 2008 10:46:17 +0000 (10:46 +0000)]
* gdb.base/break.exp: Mark failures as such. Fix formatting.
Nick Clifton [Mon, 31 Mar 2008 10:19:38 +0000 (10:19 +0000)]
Updated French translations.
Markus Deuling [Mon, 31 Mar 2008 08:34:42 +0000 (08:34 +0000)]
2008-03-31 Markus Deuling <deuling@de.ibm.com>
Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* gdb.arch/spu-info.exp (info spu mailbox): Check for correct initial
value. Add xfail for older kernels.
Daniel Jacobowitz [Mon, 31 Mar 2008 03:38:48 +0000 (03:38 +0000)]
* ia64-tdep.c (examine_prologue): Correct array access.
gdbadmin [Mon, 31 Mar 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 30 Mar 2008 23:00:05 +0000 (23:00 +0000)]
daily update
gdbadmin [Sun, 30 Mar 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 29 Mar 2008 23:00:05 +0000 (23:00 +0000)]
daily update
Ian Lance Taylor [Sat, 29 Mar 2008 08:39:26 +0000 (08:39 +0000)]
* symtab.cc (Symbol_table::do_define_as_constant): Don't force a
version symbol to be local.
* testsuite/ver_test_4.sh: New file.
* testsuite/Makefile.am (check_SCRIPTS): Add ver_test_4.sh.
(check_DATA): Add ver_test_4.syms.
(ver_test_4.syms): New target.
* testsuite/Makefile.in: Rebuild.
Ian Lance Taylor [Sat, 29 Mar 2008 08:09:55 +0000 (08:09 +0000)]
* output.cc
(Output_section::Input_section_sort_entry::has_priority): New
function.
(Output_section::Input_section_sort_entry::match_file_name): New
function.
(Output_section::Input_section_sort_entry::match_section_name):
Remove.
(Output_section::Input_section_sort_entry::match_section_name_prefix):
Remove.
(Output_section::Input_section_sort_entry::match_section_file):
Remove.
(Output_section::Input_section_sort_compare::operator()): Rewrite
using new Input_section_sort_entry functions. Sort crtbegin and
crtend first. Sort sections with no priority before sections with
a priority.
* testsuite/initpri1.c (d3): Check j != 4.
(cd5): New constructor/destructor function.
(main): Check j != 2.
Ian Lance Taylor [Sat, 29 Mar 2008 07:19:02 +0000 (07:19 +0000)]
* symtab.cc (Symbol_table::add_from_object): If we don't use the
new symbol when resolving, don't call set_is_default.
* testsuite/ver_test_7.cc: New file.
* testsuite/ver_test_7.sh: New file.
* testsuite/Makefile.am (ver_test_7.so): New target.
(ver_test_7.o): New target.
(check_SCRIPTS): Add ver_test_7.sh.
(check_DATA): Add ver_test_7.syms.
(ver_test_7.syms): New target.
gdbadmin [Sat, 29 Mar 2008 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 28 Mar 2008 23:00:20 +0000 (23:00 +0000)]
daily update
Ian Lance Taylor [Fri, 28 Mar 2008 22:42:34 +0000 (22:42 +0000)]
* layout.cc (Layout::layout): If we see an input section with a
name that needs sorting, set the must_sort flag for the output
section.
(Layout::make_output_section): If the name of the output section
indicates that it might require sorting, set the may_sort flag.
* output.h (Output_section::may_sort_attached_input_sections): New
function.
(Output_section::set_may_sort_attached_input_sections): New
function.
(Output_section::must_sort_attached_input_sections): New
function.
(Output_section::set_must_sort_attached_input_sections): New
function.
(class Output_section): Declare Input_section_sort_entry. Define
Input_section_sort_compare. Declare
sort_attached_input_sections. Add new fields:
may_sort_attached_input_sections_,
must_sort_attached_input_sections_,
attached_input_sections_are_sorted_.
* output.cc (Output_section::Output_section): Initialize new
fields.
(Output_section::add_input_section): Add an entry to
input_sections_ if may_sort or must_sort are true.
(Output_section::set_final_data_size): Call
sort_attached_input_sections if necessary.
(Output_section::Input_section_sort_entry): Define new class.
(Output_section::Input_section_sort_compare::operator()): New
function.
(Output_section::sort_attached_input_sections): New function.
* configure.ac: Check whether the compiler supports constructor
priorities. Define a CONSTRUCTOR_PRIORITY automake conditional.
* testsuite/initpri1.c: New file.
* testsuite/Makefile.am (check_PROGRAMS): Add initpri1 if
CONSTRUCTOR_PRIORITY.
(initpri1_SOURCES, initpri1_DEPENDENCIES): New variables.
(initpri1_LDFLAGS): New variable.
* configure, Makefile.in, testsuite/Makefile.in: Rebuild.
Eric B. Weddington [Fri, 28 Mar 2008 21:51:38 +0000 (21:51 +0000)]
/gas:
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add attiny167.
* doc/c-avr.texi: Likewise.
/include:
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* opcode/avr.h (AVR_ISA_TINY3): Define new opcode set for attiny167.
Eric B. Weddington [Fri, 28 Mar 2008 21:04:22 +0000 (21:04 +0000)]
/gas:
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add atmega32u4.
* doc/c-avr.texi: Likewise.
Aleksandar Ristovski [Fri, 28 Mar 2008 19:52:23 +0000 (19:52 +0000)]
* cp-support.c (first_component_command): Return if no arguments.
Eric B. Weddington [Fri, 28 Mar 2008 19:24:52 +0000 (19:24 +0000)]
/gas:
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add atmega32c1.
* doc/c-avr.texi: Likewise.
Paul Brook [Fri, 28 Mar 2008 18:13:52 +0000 (18:13 +0000)]
2008-03-28 Paul Brook <paul@codesourcery.com>
gas/
* config/tc-arm.c (parse_neon_mov): Parse register before immediate
to avoid spurious symbols.
Carlos O'Donell [Fri, 28 Mar 2008 17:30:45 +0000 (17:30 +0000)]
gdb/
2008-03-28 Carlos O'Donell <carlos@codesourcery.com>
* ser-mingw.c (ser_windows_open): Open requested name.
Aleksandar Ristovski [Fri, 28 Mar 2008 16:43:14 +0000 (16:43 +0000)]
2008-03-28 Aleksandar Ristovski <aristovski@qnx.com>
* MAINTAINERS: Added myself.
Pedro Alves [Fri, 28 Mar 2008 16:37:08 +0000 (16:37 +0000)]
* target.c (find_default_run_target): Allow a NULL `do_mesg'
parameter. If it is NULL, don't call error.
(find_default_can_async_p, find_default_is_async_p): Pass NULL as
`do_mesg' parameter to find_default_run_target. If no target was
found, return 0.
Aleksandar Ristovski [Fri, 28 Mar 2008 16:32:11 +0000 (16:32 +0000)]
2008-03-28 Aleksandar Ristovski <aristovski@qnx.com>
Bring mi-support in line with gdb.exp.
* lib/mi-support.exp (default_mi_gdb_start): Rename from mi_gdb_start.
(mi_gdb_start): New function.
Daniel Jacobowitz [Fri, 28 Mar 2008 14:53:53 +0000 (14:53 +0000)]
* mips-linux-tdep.c: Update N32/N64 signal frame comments.
(N64_SIGCONTEXT_LO, N64_SIGCONTEXT_PC, N64_SIGCONTEXT_FPCSR): Update.
(N64_SIGCONTEXT_FIR, N64_SIGCONTEXT_CAUSE, N64_SIGCONTEXT_BADVADDR):
Delete.
(mips_linux_n32n64_sigframe_init): Do not record cause or badvaddr.
Maciej W. Rozycki [Fri, 28 Mar 2008 14:01:36 +0000 (14:01 +0000)]
* gdb.mi/mi-var-cmd.exp: Fix a typo.
Nathan Sidwell [Fri, 28 Mar 2008 09:51:13 +0000 (09:51 +0000)]
* config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with
as_bad_where.
Nick Clifton [Fri, 28 Mar 2008 06:49:44 +0000 (06:49 +0000)]
Add support for thin archives.
* bfd/archive.c (_bfd_find_nested_archive): New function.
(get_extended_arelt_filename): Add origin parameter.
(_bfd_generic_read_ar_hdr_mag): Deal with extended name
combined with a file offset.
(append_relative_path): New function.
(_bfd_get_elt_at_filepos): Deal with external members and
nested archives.
(bfd_generic_openr_next_archived_file): Thin archives.
(bfd_generic_archive_p): Recognize new magic string.
(adjust_relative_path): New function.
(_bfd_construct_extended_name_table): Construct extended
names for thin archive members.
(_bfd_write_archive_contents): Emit new magic string, skip
copying files for thin archives.
* bfd/bfd-in.h (bfd_is_thin_archive): New macro.
* bfd/bfd.c (struct bfd): New fields for thin archives.
* bfd/libbfd-in.h (struct areltdata): New field for thin archives.
* bfd/opncls.c (bfd_close): Delete BFDs for nested archives.
* binutils/ar.c (make_thin_archive): New global flag.
(map_over_members): Deal with full pathnames in thin archives.
(usage, main): Add 'T' option for building thin archives.
(replace_members): Pass thin archive flag to ar_emul_append.
* binutils/arsup.c (ar_open): Initialize new flag.
* binutils/binemul.c (ar_emul_append): Add new parameter for
flattening nested archives.
(do_ar_emul_default_append): New function.
(ar_emul_default_append): Factored out recursive code.
* binutils/binemul.h (ar_emul_default_append): Add new parameter.
(struct bin_emulation_xfer_struct): New parameter for ar_append.
* binutils/dlltool.c (gen_lib_file): Initialize thin archive flag.
* binutils/emul_aix.c (ar_emul_aix_internal): Add new flatten
parameter, currently unimplemented.
All callers changed.
* binutils/objcopy.c (copy_archive): Preserve thin archive flag.
* binutils/doc/binutils.texi: Update ar documentation.
* binutils/testsuite/binutils-all/ar.exp: Add thin archive tests.
* include/aout/ar.h (ARMAGT): New magic string for thin archives.
Joseph Myers [Fri, 28 Mar 2008 01:12:56 +0000 (01:12 +0000)]
* ld-elfcomm/elfcomm.exp: Run $READELF not readelf.
gdbadmin [Fri, 28 Mar 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 27 Mar 2008 23:00:05 +0000 (23:00 +0000)]
daily update
Ian Lance Taylor [Thu, 27 Mar 2008 19:57:41 +0000 (19:57 +0000)]
* common.cc (Sort_commons::operator): Correct sorting algorithm.
* testsuite/common_test_1.c: New file.
* testsuite/Makefile.am (check_PROGRAMS): Add common_test_1.
(common_test_1_SOURCES): New variable.
(common_test_1_DEPENDENCIES): New variable.
(common_test_1_LDFLAGS): New variable.
gdbadmin [Thu, 27 Mar 2008 19:37:04 +0000 (19:37 +0000)]
GDB 6.8 released.
Ian Lance Taylor [Thu, 27 Mar 2008 18:19:09 +0000 (18:19 +0000)]
* symtab.cc (Symbol_table::add_from_object): Handle saw_undefined_
and commons_ correctly when NAME/VERSION does not override
NAME/NULL.
* testsuite/ver_test_6.c: New file.
* testsuite/Makefile.am (check_PROGRAMS): Add ver_test_6
(ver_test_6_SOURCES, ver_test_6_DEPENDENCIES): New variables.
(ver_test_6_LDFLAGS, ver_test_6_LDADD): New variables.
Nick Clifton [Thu, 27 Mar 2008 14:52:35 +0000 (14:52 +0000)]
* config/tc-avr.c (mcu_types): Add atmega32m1.
* doc/c-avr.texi: Likewise.
Paolo Bonzini [Thu, 27 Mar 2008 14:16:55 +0000 (14:16 +0000)]
2008-03-27 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (PICFLAG, PICFLAG_FOR_TARGET): Remove.
* Makefile.in: Regenerate.
config:
2008-03-27 Paolo Bonzini <bonzini@gnu.org>
* extensions.m4: New.
2008-03-27 Paolo Bonzini <bonzini@gnu.org>
* mh-armpic: Remove.
* mh-i370pic: Remove.
* mh-m68kpic: Remove.
* mh-ppcpic: Remove.
* mh-sparcpic: Remove.
* mh-ia64pic: Remove.
* mh-papic: Remove.
* mh-s390pic: Remove.
* mh-x86pic: Remove.
libiberty:
2008-03-27 Paolo Bonzini <bonzini@gnu.org>
* configure.ac (frags): Don't set, use frag instead.
(PICFLAG): Set here and substitute.
* Makefile.in (PICFLAG): Substitute from autoconf.
* configure: Regenerate.
Nick Clifton [Thu, 27 Mar 2008 14:12:15 +0000 (14:12 +0000)]
* config/tc-arm.c (do_neon_cvt): Move variable declarations to
start of block.
(do_neon_ext): Fix sign of comparison.
Ulrich Weigand [Thu, 27 Mar 2008 13:11:52 +0000 (13:11 +0000)]
ChangeLog:
* features/Makefile (%.dat): Set xmltarget to the base filename
of the XML source, without subdirectory.
* regformats/rs6000/powerpc-32.dat: Regenerate.
* regformats/rs6000/powerpc-64.dat: Regenerate.
* regformats/rs6000/powerpc-e500.dat: Regenerate.
gdbserver/ChangeLog:
* server.c (get_features_xml): Fix inverted condition.
(handle_query): Always support qXfer:feature:read.
This page took 0.044392 seconds and 4 git commands to generate.