Gerrit Renker [Sun, 7 Feb 2010 20:20:28 +0000 (20:20 +0000)]
dccp: allow probing of CCID-array length
This fixes a problem in the DCCP getsockopt() API: currently there is no way
for a user to a priori know the number of built-in CCIDs, other than trying
DCCP_SOCKOPT_AVAILABLE_CCIDS in a loop, incrementing the option length until
EINVAL is no longer returned.
This patch truncates the array to the user-provided length. No copy is made
when the length is <= 0.
Due to the length restriction in do_dccp_getsockopt() to sizeof(int), the
minimum array length remains 4, which is a reasonable default (only 3
CCIDs, CCID-2..4, are currently defined).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Mon, 8 Feb 2010 05:12:08 +0000 (05:12 +0000)]
macb: straighten out macb_mii_probe function
Use "phy_find_first" instead of manual lookup. Also use "phy_connect_direct"
instead of "phy_connect" since we already have phy_device pointer here.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Mon, 8 Feb 2010 04:30:35 +0000 (04:30 +0000)]
net: use netdev_mc_count and netdev_mc_empty when appropriate
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss
anything). Used spatch and did small tweaks and conding style changes when
it was suitable.
Jirka
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roland Dreier [Thu, 11 Feb 2010 20:14:23 +0000 (12:14 -0800)]
ethtool: Use explicit designated initializers for .cmd
Initialize the .cmd member of various ethtool using a designated struct
initializer rather. This makes things a teeny bit more robust, although
the chance of a struct layout changing is extremely remote, and also
makes the code a little easier to read.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Waskiewicz [Wed, 10 Feb 2010 16:08:13 +0000 (16:08 +0000)]
ixgbe: Bump driver version up
Driver has gone under significant changes, the version should
reflect that.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Waskiewicz [Wed, 10 Feb 2010 16:07:54 +0000 (16:07 +0000)]
ixgbe: Add support for the new ethtool n-tuple programming interface
This patch adds n-tuple filter programming to 82599.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter P Waskiewicz Jr [Thu, 11 Feb 2010 04:03:05 +0000 (20:03 -0800)]
ethtool: Introduce n-tuple filter programming support
This patchset enables the ethtool layer to program n-tuple
filters to an underlying device. The idea is to allow capable
hardware to have static rules applied that can assist steering
flows into appropriate queues.
Hardware that is known to support these types of filters today
are ixgbe and niu.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Sun, 7 Feb 2010 06:28:36 +0000 (06:28 +0000)]
sky2: receive checksum refactoring
Break the largish case for handling receive checksum into a separate
function, and if there is a problem use dev_XXX routines to
show which hardware is the problem.
Turn one corner case into a BUG(). This only happens if the driver
is expecting one behavior but the chip does the old behavior;
only ever saw this when bringing up a new chip type and driver
was buggy.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Sun, 7 Feb 2010 06:24:50 +0000 (06:24 +0000)]
sky2: disable ASF on Yukon Supreme
Clone of vendor code to disable ASF on Extreme and Supreme chips.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Sun, 7 Feb 2010 06:23:53 +0000 (06:23 +0000)]
sky2: resume clocks
Change the resume path to use pci write config for a couple of reasons:
1. pci_write_config_dword() allows for more error
checking of PCI health after resume.
2. better to toggle this register on all chip types, since that
is what vendor driver does.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Kucheria [Fri, 5 Feb 2010 08:56:22 +0000 (08:56 +0000)]
fec: Add ARCH_MX5 as a dependency
i.MX51 babbage board has a FEC ethernet controller
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Kucheria [Fri, 5 Feb 2010 08:56:21 +0000 (08:56 +0000)]
fec: Add LAN8700 phy support
The i.MX51 babbage board has a FEC ethernet controller with this phy.
In the long term we should resurrect the phylib patches for fec.
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Herring [Fri, 5 Feb 2010 08:56:20 +0000 (08:56 +0000)]
fec: fix uninitialized rx buffer usage
The fec driver was enabling receive buffer descriptor without allocating
the buffers. Make sure the buffer descriptors are initialized to not
start receiving packets.
Open also calls fec_restart after the rx buffers are allocated. With the code
in fec_restart, it zeroes out the buffer descriptors that have just been
setup.
Signed-off-by: Rob Herring <r.herring@freescale.com>
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:21:51 +0000 (23:21 +0000)]
net: atm: use seq_list_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:21:22 +0000 (23:21 +0000)]
net: ipx: use seq_list_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:21:05 +0000 (23:21 +0000)]
net: irda: use seq_list_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:20:42 +0000 (23:20 +0000)]
net: x25: use seq_list_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:20:29 +0000 (23:20 +0000)]
net: af_key: use seq_hlist_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:20:15 +0000 (23:20 +0000)]
net: appletalk: use seq_hlist_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:19:59 +0000 (23:19 +0000)]
net: ax25: use seq_hlist_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:19:42 +0000 (23:19 +0000)]
net: netrom: use seq_hlist_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:19:29 +0000 (23:19 +0000)]
net: packet: use seq_hlist_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:19:17 +0000 (23:19 +0000)]
net: rose: use seq_hlist_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:19:04 +0000 (23:19 +0000)]
net: x25: use seq_hlist_foo() helpers
Simplify seq_file code.
Signed-off-by: Li Zefan <lizf@cn.fujtisu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:18:45 +0000 (23:18 +0000)]
net: add a wrapper sk_entry()
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Mon, 8 Feb 2010 23:18:22 +0000 (23:18 +0000)]
seq_file: Add helpers for iteration over a hlist
Some places in kernel need to iterate over a hlist in seq_file,
so provide some common helpers.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 9 Feb 2010 19:44:44 +0000 (11:44 -0800)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6
David S. Miller [Tue, 9 Feb 2010 06:45:56 +0000 (22:45 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/holtmann/bluetooth-2.6
Julia Lawall [Tue, 9 Feb 2010 06:44:18 +0000 (22:44 -0800)]
drivers/net: Correct NULL test
Test the value that was just allocated rather than the previously tested one.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r@
expression *x;
expression e;
identifier l;
@@
if (x == NULL || ...) {
... when forall
return ...; }
... when != goto l;
when != x = e
when != &x
*x == NULL
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Tue, 9 Feb 2010 06:42:40 +0000 (22:42 -0800)]
MAINTAINERS: networking drivers - Add git net-next tree
During the rc period, patches that are not bugfixes
should be done using the net-next tree.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Luebbe [Tue, 9 Feb 2010 06:41:44 +0000 (22:41 -0800)]
net/sched: Fix module name in Kconfig
The action modules have been prefixed with 'act_', but the Kconfig
description was not changed.
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Divy Le Ray [Tue, 9 Feb 2010 06:37:24 +0000 (22:37 -0800)]
cxgb3: fix GRO checksum check
Verify the HW checksum state for frames handed to GRO processing.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 8 Feb 2010 23:00:39 +0000 (15:00 -0800)]
dst: call cond_resched() in dst_gc_task()
Kernel bugzilla #15239
On some workloads, it is quite possible to get a huge dst list to
process in dst_gc_task(), and trigger soft lockup detection.
Fix is to call cond_resched(), as we run in process context.
Reported-by: Pawel Staszewski <pstaszewski@itcare.pl>
Tested-by: Pawel Staszewski <pstaszewski@itcare.pl>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 8 Feb 2010 19:18:07 +0000 (11:18 -0800)]
netfilter: nf_conntrack: fix hash resizing with namespaces
As noticed by Jon Masters <jonathan@jonmasters.org>, the conntrack hash
size is global and not per namespace, but modifiable at runtime through
/sys/module/nf_conntrack/hashsize. Changing the hash size will only
resize the hash in the current namespace however, so other namespaces
will use an invalid hash size. This can cause crashes when enlarging
the hashsize, or false negative lookups when shrinking it.
Move the hash size into the per-namespace data and only use the global
hash size to initialize the per-namespace value when instanciating a
new namespace. Additionally restrict hash resizing to init_net for
now as other namespaces are not handled currently.
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Mon, 8 Feb 2010 19:17:43 +0000 (11:17 -0800)]
netfilter: xtables: compat out of scope fix
As per C99 6.2.4(2) when temporary table data goes out of scope,
the behaviour is undefined:
if (compat) {
struct foo tmp;
...
private = &tmp;
}
[dereference private]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
Alexey Dobriyan [Mon, 8 Feb 2010 19:17:22 +0000 (11:17 -0800)]
netfilter: nf_conntrack: restrict runtime expect hashsize modifications
Expectation hashtable size was simply glued to a variable with no code
to rehash expectations, so it was a bug to allow writing to it.
Make "expect_hashsize" readonly.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
Eric Dumazet [Mon, 8 Feb 2010 19:16:56 +0000 (11:16 -0800)]
netfilter: nf_conntrack: per netns nf_conntrack_cachep
nf_conntrack_cachep is currently shared by all netns instances, but
because of SLAB_DESTROY_BY_RCU special semantics, this is wrong.
If we use a shared slab cache, one object can instantly flight between
one hash table (netns ONE) to another one (netns TWO), and concurrent
reader (doing a lookup in netns ONE, 'finding' an object of netns TWO)
can be fooled without notice, because no RCU grace period has to be
observed between object freeing and its reuse.
We dont have this problem with UDP/TCP slab caches because TCP/UDP
hashtables are global to the machine (and each object has a pointer to
its netns).
If we use per netns conntrack hash tables, we also *must* use per netns
conntrack slab caches, to guarantee an object can not escape from one
namespace to another one.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
[Patrick: added unique slab name allocation]
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
Patrick McHardy [Mon, 8 Feb 2010 19:16:26 +0000 (11:16 -0800)]
netfilter: nf_conntrack: fix memory corruption with multiple namespaces
As discovered by Jon Masters <jonathan@jonmasters.org>, the "untracked"
conntrack, which is located in the data section, might be accidentally
freed when a new namespace is instantiated while the untracked conntrack
is attached to a skb because the reference count it re-initialized.
The best fix would be to use a seperate untracked conntrack per
namespace since it includes a namespace pointer. Unfortunately this is
not possible without larger changes since the namespace is not easily
available everywhere we need it. For now move the untracked conntrack
initialization to the init_net setup function to make sure the reference
count is not re-initialized and handle cleanup in the init_net cleanup
function to make sure namespaces can exit properly while the untracked
conntrack is in use in other namespaces.
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 6 Feb 2010 00:29:48 +0000 (16:29 -0800)]
packet: Kill CONFIG_PACKET_MMAP.
Early on this was an experimental facility that few
people other than Alexey Kuznetsov played with.
Now it's a pretty fundamental thing and as people add
more features to AF_PACKET sockets this config options
creates ifdef spaghetti.
So kill it off.
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Poole [Fri, 5 Feb 2010 17:23:43 +0000 (12:23 -0500)]
Bluetooth: Keep a copy of each HID device's report descriptor
The report descriptor is read by user space (via the Service
Discovery Protocol), so it is only available during the ioctl
to connect. However, the HID probe function that needs the
descriptor might not be called until a specific module is
loaded. Keep a copy of the descriptor so it is available for
later use.
Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Jiri Pirko [Fri, 5 Feb 2010 02:52:39 +0000 (02:52 +0000)]
net: e1000e: convert to use mc helpers
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 5 Feb 2010 02:51:24 +0000 (02:51 +0000)]
net: dm9601: convert to use mc helpers
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 5 Feb 2010 02:48:11 +0000 (02:48 +0000)]
net: 8139too: convert to use mc helpers
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 5 Feb 2010 02:47:28 +0000 (02:47 +0000)]
net: 8139cp: convert to use mc helpers
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 5 Feb 2010 06:31:41 +0000 (22:31 -0800)]
e1000e: Fix namespace conflicts wrt. e1000_has_link
Reported by Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 5 Feb 2010 04:28:48 +0000 (20:28 -0800)]
bridge: Remove unused age_list
This patch removes the unused age_list member from the net_bridge
structure.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sridhar Samudrala [Fri, 5 Feb 2010 04:24:10 +0000 (20:24 -0800)]
packet: Add GSO/csum offload support.
This patch adds GSO/checksum offload to af_packet sockets using
virtio_net_hdr. Based on Rusty's patch to add this support to tun.
It allows GSO/checksum offload to be enabled when using raw socket
backend with virtio_net.
Adds PACKET_VNET_HDR socket option to prepend virtio_net_hdr in the
receive path and process/skip virtio_net_hdr in the send path. This
option is only allowed with SOCK_RAW sockets attached to ethernet
type devices.
v2 updates
----------
Michael's Comments
- Perform length check in packet_snd() when GSO is off even when
vnet_hdr is present.
- Check for SKB_GSO_FCOE type and return -EINVAL
- don't allow tx/rx ring when vnet_hdr is enabled.
Herbert's Comments
- Removed ethernet specific code.
- protocol value is assumed to be passed in by the caller.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Breno Leitao [Thu, 4 Feb 2010 10:11:19 +0000 (10:11 +0000)]
qlge: Code clean up
Just reordering this assignment that doesn't depend on any
condition.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Breno Leitao [Thu, 4 Feb 2010 10:11:18 +0000 (10:11 +0000)]
qlge: removing unreachable block of code
Currently the qlge_change_mtu() is never called if the new_mtu is
equal current MTU, due this condition on dev_set_mtu():
if (new_mtu == dev->mtu)
return 0;
So, this block of code is never reached and is being removed.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Egger [Wed, 3 Feb 2010 06:05:54 +0000 (06:05 +0000)]
ipv4: obsolete config in kernel source (IP_ROUTE_PERVASIVE)
CONFIG_IP_ROUTE_PERVASIVE is missing a corresponding config
IP_ROUTE_PERVASIVE somewhere in KConfig (and missing it for ages
already) so it looks like some aging artefact no longer needed.
Therefor this patch kills of the only remaining reference to that
config Item removing the already unrechable code snipet.
Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafael J. Wysocki [Thu, 4 Feb 2010 22:00:41 +0000 (14:00 -0800)]
pktgen: Fix freezing problem
Add missing try_to_freeze() to one of the pktgen_thread_worker() code
paths so that it doesn't block suspend/hibernation.
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=15006
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Ciprian Dorin Craciun <ciprian.craciun@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Brian Haley [Thu, 4 Feb 2010 21:36:50 +0000 (13:36 -0800)]
doc: document IPv6 parameters
Update documentation to describe IPv6 parameters.
Reported by <greg@enjellic.com>.
Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Thu, 4 Feb 2010 21:32:46 +0000 (13:32 -0800)]
qlge: Add watchdog timer.
Add periodic heartbeat register read to trigger the eeh
recovery process.
We see cases where an eeh error was injected and the slot was
suspended. An asic access attempt is required to flush the recovery process,
but without interrupts the process can stall.
Adding this periodic register read causes the recovery process to begin.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 4 Feb 2010 18:23:02 +0000 (10:23 -0800)]
libphy: add phy_find_first function
Many drivers do this in them manually. Now they can use this function.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 4 Feb 2010 18:22:25 +0000 (10:22 -0800)]
net: use helpers to access mc list V2
This patch introduces the similar helpers as those already done for uc list.
However multicast lists are no list_head lists but "mademanually". The three
macros added by this patch will make the transition of mc_list to list_head
smooth in two steps:
1) convert all drivers to use these macros (with the original iterator of type
"struct dev_mc_list")
2) once all drivers are converted, convert list type and iterators to "struct
netdev_hw_addr" in one patch.
>From now on, drivers can (and should) use "netdev_for_each_mc_addr" to iterate
over the addresses with iterator of type "struct netdev_hw_addr". Also macros
"netdev_mc_count" and "netdev_mc_empty" to read list's length. This is the state
which should be reached in all drivers.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 3 Feb 2010 21:59:51 +0000 (21:59 +0000)]
igb: make certain to reassign legacy interrupt vectors after reset
This change corrects an issue that will cause false hangs when using either
82575 or 82580 in legacy interrupt mode. The issue is caused when there is
a slow traffic flow and an "ethtool -r" is executed while using legacy or
MSI interrupts. MSI-X is not affected by this issue due to the fact that
we were already reconfiguring the vectors after reset.
If possible it would be best to push this for net-2.6 since it is resolving
a bug but if that is not possible then net-next-2.6 will be fine.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Giuseppe Cavallaro [Thu, 4 Feb 2010 17:33:21 +0000 (09:33 -0800)]
stmmac: fix 'lenght' typo in comments and code
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thadeu Lima de Souza Cascardo [Thu, 4 Feb 2010 17:21:28 +0000 (09:21 -0800)]
can: ems_usb: removed duplicated code setting local echo support
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Feb 2010 16:58:14 +0000 (08:58 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6
Stephen Hemminger [Wed, 3 Feb 2010 08:31:12 +0000 (08:31 +0000)]
sky2: Flow control frames recorded as dropped packets
Thanks for your patch. A more general solution would be to move the
rx_dropped up into sky2_receive.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 1 Feb 2010 13:45:41 +0000 (13:45 +0000)]
sky2: hand receive DMA mapping failures
If receive buffer mapping failed, then it was possible to get
stuck with unmapped receive buffer in DMA ring.
This would be an extremely rare condition because the driver had just
released the map for the last receive so it should be able to get
another map again (in soft-irq).
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Mon, 1 Feb 2010 09:44:19 +0000 (09:44 +0000)]
net: CONFIG_COMPAT redux
Ifdef out
struct proto_ops::compat_ioctl
struct proto_ops::compat_setsockopt
struct proto_ops::compat_getsockopt
to make structures smaller on COMPAT=n kernels.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Pellegrin [Wed, 3 Feb 2010 07:39:54 +0000 (07:39 +0000)]
can: mcp251x: Move to threaded interrupts instead of workqueues.
This patch addresses concerns about efficiency of handling incoming
packets. Handling of interrupts is done in a threaded interrupt handler
which has a smaller latency than workqueues. This change needed a rework
of the locking scheme that was much simplified. Some other (more or less
longstanding) bugs are fixed: utilization of just half of the RX
buffers, useless wait for interrupt on open, more reliable reset
sequence. The MERR interrupt is not used anymore: it overloads the CPU
in error-passive state without any additional information. One shot mode
is disabled because it's not clear if it can be handled efficiently on
this CAN controller.
Signed-off-by: Christian Pellegrin <chripell@fsfe.org>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde [Mon, 1 Feb 2010 14:06:52 +0000 (14:06 +0000)]
bonding: Remove net_device_stats from bonding struct
There is no need to maintain stats in the bonding structure.
Use the instance of net_device_stats in netdevice.
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 1 Feb 2010 21:22:11 +0000 (21:22 +0000)]
drivers/net/davinci_emac.c: Fix continuation line formats
String constants that are continued on subsequent lines with \
are not good.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thadeu Lima de Souza Cascardo [Mon, 1 Feb 2010 07:58:59 +0000 (07:58 +0000)]
trivial: remove duplicated "from" in CAN USB EMS Kconfig help
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Sat, 30 Jan 2010 12:24:26 +0000 (12:24 +0000)]
net: macvtap driver
In order to use macvlan with qemu and other tools that require
a tap file descriptor, the macvtap driver adds a small backend
with a character device with the same interface as the tun
driver, with a minimum set of features.
Macvtap interfaces are created in the same way as macvlan
interfaces using ip link, but the netif is just used as a
handle for configuration and accounting, while the data
goes through the chardev. Each macvtap interface has its
own character device, simplifying permission management
significantly over the generic tun/tap driver.
Cc: Patrick McHardy <kaber@trash.net>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: David S. Miller" <davem@davemloft.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Or Gerlitz <ogerlitz@voltaire.com>
Cc: netdev@vger.kernel.org
Cc: bridge@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Sat, 30 Jan 2010 12:23:40 +0000 (12:23 +0000)]
macvlan: allow multiple driver backends
This makes it possible to hook into the macvlan driver
from another kernel module. In particular, the goal is
to extend it with the macvtap backend that provides
a tun/tap compatible interface directly on the macvlan
device.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Sat, 30 Jan 2010 12:23:03 +0000 (12:23 +0000)]
net: maintain namespace isolation between vlan and real device
In the vlan and macvlan drivers, the start_xmit function forwards
data to the dev_queue_xmit function for another device, which may
potentially belong to a different namespace.
To make sure that classification stays within a single namespace,
this resets the potentially critical fields.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Tue, 2 Feb 2010 12:43:59 +0000 (12:43 +0000)]
net/rds: remove uses of NIPQUAD, use %pI4
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Grover <andy.grover@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roel Kluin [Tue, 2 Feb 2010 12:43:47 +0000 (12:43 +0000)]
mISDN: positive error return should be negative in mode_hfcmulti()
The error return should be negative. Its only caller that acts upon its
return, handle_bmsg(), transmits the positive error but can also return
negative errors.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Slaby [Tue, 2 Feb 2010 12:43:46 +0000 (12:43 +0000)]
isdn: mISDN, don't compile unused stuff
Remove these compiler warnings:
drivers/isdn/hardware/mISDN/w6692.c:534: warning: `setvolume' defined but not used
drivers/isdn/hardware/mISDN/w6692.c:561: warning: `enable_pots' defined but not used
by moving the functions inside #if 0 ... #endif. And an alternative is
to remove them completely if nobody has plans to use them.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Darren Jenkins [Tue, 2 Feb 2010 12:43:45 +0000 (12:43 +0000)]
hardware/mISDN/mISDNinfineon.c: bail out of loop on error
If setup_instance() fails we kfree() the card, and then use it in the next
loop iteration. So lets bail out of the loop instead.
Coverity CID: 13357
Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roel Kluin [Tue, 2 Feb 2010 12:43:44 +0000 (12:43 +0000)]
hisax: timeout off by one in waitrecmsg()
With `while (timeout++ < maxdelay)' timeout reaches maxdelay + 1 after the
loop This is probably unlikely a problem in practice.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thadeu Lima de Souza Cascardo [Mon, 1 Feb 2010 08:21:35 +0000 (08:21 +0000)]
irda: add missing BKL in irnet_ppp ioctl
One ioctl has been forgotten when the BKL was push down into irnet_ppp
ioctl function.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thadeu Lima de Souza Cascardo [Mon, 1 Feb 2010 08:21:34 +0000 (08:21 +0000)]
irda: unbalanced lock_kernel in irnet_ppp
Add the missing unlock_kernel in one ioctl operation.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Wed, 3 Feb 2010 07:24:12 +0000 (07:24 +0000)]
qlge: Add check for eeh failure when closing device.
Fix crash where resources are freed twice on an eeh recovery failure.
If eeh recovery fails we set a flag to indicate to close() that
resources have been freed.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Wed, 3 Feb 2010 07:24:11 +0000 (07:24 +0000)]
qlge: Move reset from eeh io_resume to slot_reset.
Issue asic reset and verify functionality before continuing to the
resume call. This allows proper error code to be returned in the case
the asic does not recover.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PJ Waskiewicz [Wed, 3 Feb 2010 14:19:12 +0000 (14:19 +0000)]
ixgbe: Make descriptor ring allocations NUMA-aware
This patch allocates the ring structures themselves on each
NUMA node along with the buffer_info structures. This way we
don't allocate the entire ring memory on a single node in one
big block, thus reducing NUMA node memory crosstalk.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Brandeburg [Wed, 3 Feb 2010 14:18:50 +0000 (14:18 +0000)]
ixgbe: Allocate driver resources per NUMA node
The default policy for the current driver is to do all its memory
allocation on whatever processor is running insmod/modprobe. This
is less than optimal.
This driver's default mode of operation will be to use each node for each
subsequent transmit/receive queue. The most efficient allocation will be
to then have the interrupts bound in such a way as to match up the
interrupt of the queue to the cpu where its memory was allocated.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nick Nunley [Wed, 3 Feb 2010 14:49:48 +0000 (14:49 +0000)]
e1000: call pci_save_state after pci_restore_state
This patch adds a call to pci_save_state() immediately after
the call to pci_restore_state(). Due to a change in the behavior
of pci_restore_state() it is necessary to call pci_save_state()
to keep the state_saved flag. This patch is based on a similar
patch for ixgbe.
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nick Nunley [Wed, 3 Feb 2010 14:49:28 +0000 (14:49 +0000)]
e1000: Report link status in ethtool when interface is down
With this change ethtool will correctly report link status when
the interface is down. Currently ethtool reports the link as not
detected when the interface is down.
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Wed, 3 Feb 2010 14:23:32 +0000 (14:23 +0000)]
ixgbe: only process one ixgbe_watchdog_task at a time.
Processing multiple ixgbe_watchdog_task calls may cause
the link_up variable and IXGBE_FLAG_NEED_LINK_UPDATE flag
to be set incorrectly. In the worse case this is causing
the netif_carrier_off to be called inappropriately which
results in an interface that can't be brought up.
Although schedule_work() will only schedule the task if
it is not already on the work queue the WORK_STRUCT_PENDING
bits are cleared just before calling the work function.
This allows WORK_STRUCT_PENDING to be cleared, the work
function to start and meanwhile schedule another task.
This patch adds a mutex to the watchdog task. This bug is
actualized by changing DCB settings or doing extended
cable pull or reset tests.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Feb 2010 03:38:22 +0000 (19:38 -0800)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6
Krishna Kumar [Wed, 3 Feb 2010 13:13:10 +0000 (13:13 +0000)]
ixgbe: Fix return of invalid txq
a developer had complained of getting lots of warnings:
"eth16 selects TX queue 98, but real number of TX queues is 64"
http://www.mail-archive.com/e1000-devel@lists.sourceforge.net/msg02200.html
As there was no follow up on that bug, I am submitting this
patch assuming that the other return points will not return
invalid txq's, and also that this fixes the bug (not tested).
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anton Blanchard [Wed, 3 Feb 2010 13:12:51 +0000 (13:12 +0000)]
ixgbe: Fix ixgbe_tx_map error path
Commit
e5a43549f7a58509a91b299a51337d386697b92c (ixgbe: remove
skb_dma_map/unmap calls from driver) looks to have introduced a bug in
ixgbe_tx_map. If we get an error from a PCI DMA call, we loop backwards
through count until it becomes -1 and return that.
The caller of ixgbe_tx_map expects 0 on error, so return that instead.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Kumar Salecha [Tue, 2 Feb 2010 04:16:21 +0000 (04:16 +0000)]
netxen: protect resource cleanup by rtnl lock
o context resources can be in used, while resource cleanup is in progress,
during fw recover.
o Null pointer execption can occur in send_cmd_desc, if fw recovery
module frees tx ring without rtnl lock.
o Same applies to ethtool register dump.
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Kumar Salecha [Tue, 2 Feb 2010 04:16:20 +0000 (04:16 +0000)]
netxen: fix tx timeout recovery for NX2031 chip
For NX2031, first try to scrub interrupt before requesting firmware
reset. Return statement was missing after scrubbbing interrupt.
Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Wed, 3 Feb 2010 09:32:06 +0000 (09:32 +0000)]
sfc: Do not include unneeded headers
Earlier refactoring has made these inclusions unnecessary.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Wed, 3 Feb 2010 09:31:57 +0000 (09:31 +0000)]
sfc: Fix some incorrect or redundant comments
In particular, the comment about EVQ_RPTR_REG is based on inconsistent
preliminary hardware documentation, though the following code was
fixed long before release.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Wed, 3 Feb 2010 09:31:46 +0000 (09:31 +0000)]
sfc: Remove declarations of nonexistent functions
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Hodgson [Wed, 3 Feb 2010 09:31:40 +0000 (09:31 +0000)]
sfc: Add some missing bits to register self-test masks
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guido Barzini [Wed, 3 Feb 2010 09:31:24 +0000 (09:31 +0000)]
sfc: Survive ISR0=0 bug in the shared IRQ case
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Wed, 3 Feb 2010 09:31:01 +0000 (09:31 +0000)]
sfc: Implement NVRAM selftest for SFC9000 family
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Wed, 3 Feb 2010 09:30:50 +0000 (09:30 +0000)]
sfc: Replace PHY MDIO test with an 'alive' test
SFC9000-family boards do not all use MDIO PHYs, so we need a different
test for PHY aliveness.
Introduce a PHY operation test_alive(). For PHYs attached to Falcon,
use a common implementation based on the existing PHY MDIO test.
For PHYs managed through MCDI, use the appropriate MCDI request.
Change test name in ethtool from 'core mdio' to 'phy alive'.
Rename test_results::mdio to phy_alive and test_results::phy to phy_ext.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Hodgson [Wed, 3 Feb 2010 09:30:38 +0000 (09:30 +0000)]
sfc: Enable autonegotiated flow-control by default if supported
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Hodgson [Wed, 3 Feb 2010 09:30:17 +0000 (09:30 +0000)]
sfc: Handle firmware assertion failure while resetting
This allows the driver to recover if the MC firmware has crashed due
to an assertion failure.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Wed, 3 Feb 2010 09:28:14 +0000 (09:28 +0000)]
sfc: Update MCDI protocol definitions
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nick Pelly [Fri, 13 Nov 2009 22:16:32 +0000 (14:16 -0800)]
Bluetooth: Enter active mode before establishing a SCO link.
When in sniff mode with a long interval time (1.28s) it can take 4+ seconds
to establish a SCO link. Fix by requesting active mode before requesting
SCO connection. This improves SCO setup time to ~500ms.
Bluetooth headsets that use a long interval time, and exhibit the long
SCO connection time include Motorola H790, HX1 and H17. They have a
CSR 2.1 chipset.
Verified this behavior and fix with host Bluetooth chipsets: BCM4329 and
TI1271.
2009-10-13 14:17:46.183722 > HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 1 mode 0x02 interval 2048
Mode: Sniff
2009-10-13 14:17:53.436285 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
handle 1 voice setting 0x0060
2009-10-13 14:17:53.445593 > HCI Event: Command Status (0x0f) plen 4
Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1
2009-10-13 14:17:57.788855 > HCI Event: Synchronous Connect Complete 0x2c) plen 17
status 0x00 handle 257 bdaddr 00:1A:0E:F1:A4:7F type eSCO
Air mode: CVSD
Signed-off-by: Nick Pelly <npelly@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Yoichi Yuasa [Thu, 4 Feb 2010 00:55:51 +0000 (09:55 +0900)]
Bluetooth: Fix memory leak in Marvell BT-over-SDIO driver
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This page took 0.044432 seconds and 5 git commands to generate.