GDB Administrator [Fri, 3 Jul 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Kevin Buettner [Thu, 2 Jul 2015 22:02:56 +0000 (15:02 -0700)]
rx: Create and use flags types for psw, bpsw, and fpsw registers.
This change adds two flags types for the (Renesas RX) psw, bpsw, and
fpsw registers. As a result, symbolic flags are displayed for these
registers in the output of GDB's "info registers" command as well as
in output from other commands, such as "print".
gdb/ChangeLog:
* rx-tdep.c (RX_BPSW_REGNUM, RX_FPSW_REGNUM): New constants.
(struct gdbarch_tdep): Add fields rx_psw_type and rx_fpsw_type.
(rx_register_type): Add cases for RX_PSW_REGNUM, RX_BPSW_REGNUM,
and RX_FPSW_REGNUM.
(rx_gdbarch_init): Initialize PSW, BPSW, and FPSW flags types.
Jan Kratochvil [Thu, 2 Jul 2015 20:39:57 +0000 (22:39 +0200)]
Fix GCC false warning
At least on
gcc-4.4.7-11.el6.i686
./configure --enable-64-bit-bfd --enable-targets=all
GDB does not build due to:
cc1: warnings being treated as errors
s390-linux-tdep.c: In function ‘s390_handle_arg’:
s390-linux-tdep.c:2575: error: ‘val’ may be used uninitialized in this function
gdb/ChangeLog
2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix GCC false warning.
* s390-linux-tdep.c (s390_handle_arg): Initialize VAL.
Yao Qi [Thu, 2 Jul 2015 13:03:54 +0000 (14:03 +0100)]
Fix typo in aarch64_linux_insert_hw_breakpoint
It should be "insert_hw_breakpoint" rather than "insert_hw_watchpoint".
gdb:
2015-07-02 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix
typo in the debugging message.
Nick Clifton [Thu, 2 Jul 2015 15:19:09 +0000 (16:19 +0100)]
Fix snafu with latest addition to the ARM sim.
* Makefile.in (SIM_EXTRA_CFLAGS): Revert previous delta.
(SIM_EXTRA_LIBS): Add -lm.
Markus Metzger [Mon, 3 Feb 2014 13:35:28 +0000 (14:35 +0100)]
btrace: maintenance commands
Add maintenance commands that help debugging the btrace record target.
The following new commands are added:
maint info btrace
Print information about branch tracing internals.
maint btrace packet-history
Print the raw branch tracing data.
maint btrace clear-packet-history
Discard the stored raw branch tracing data.
maint btrace clear
Discard all branch tracing data. It will be fetched and processed
anew by the next "record" command.
maint set|show btrace pt skip-pad
Set and show whether PAD packets are skipped when computing the
packet history.
gdb/
* btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h.
(maint_btrace_cmdlist, maint_btrace_set_cmdlist)
(maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist)
(maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad)
(btrace_maint_clear): New.
(btrace_fetch, btrace_clear): Call btrace_maint_clear.
(pt_print_packet, btrace_maint_decode_pt)
(btrace_maint_update_pt_packets, btrace_maint_update_packets)
(btrace_maint_print_packets, get_uint, get_context_size, no_chunk)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd)
(maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd)
(maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd)
(maint_info_btrace_cmd, _initialize_btrace): New.
* btrace.h (btrace_pt_packet, btrace_pt_packet_s)
(btrace_maint_packet_history, btrace_maint_info): New.
(btrace_thread_info) <maint>: New.
* NEWS: Announce it.
doc/
* gdb.texinfo (Maintenance Commands): Document "maint btrace"
commands.
Markus Metzger [Mon, 3 Feb 2014 10:40:50 +0000 (11:40 +0100)]
btrace: store raw btrace data
Store the raw branch trace data that has been read from the target.
This data can be used for maintenance commands as well as for generating
a core file for the "record save" command.
gdb/
* btrace.c (btrace_fetch): Append the new trace data.
(btrace_clear): Clear the stored trace data.
* btrace.h (btrace_thread_info) <data>: New.
* common/btrace-common.h (btrace_data_clear)
(btrace_data_append): New.
* common/btrace-common.c (btrace_data_clear)
(btrace_data_append): New.
Markus Metzger [Mon, 17 Nov 2014 10:18:05 +0000 (11:18 +0100)]
btrace, linux: use data_size and data_offset
In struct perf_event_mmap_page there are new fields data_size and data_offset
that give the location of the perf_event data buffer relative to the mmap
page. Use them if they are present.
gdb/
* nat/linux-btrace.c (linux_enable_bts): Check for
PERF_ATTR_SIZE_VER5.
Check for data_offset and data_size fields. Use them.
Markus Metzger [Fri, 24 Jan 2014 12:45:47 +0000 (13:45 +0100)]
btrace: support Intel(R) Processor Trace
Adds a new command "record btrace pt" to configure the kernel to use
Intel(R) Processor Trace instead of Branch Trace Strore.
The "record btrace" command chooses the tracing format automatically.
Intel(R) Processor Trace support requires Linux 4.1 and libipt.
gdb/
* NEWS: Announce new commands "record btrace pt" and "record pt".
Announce new options "set|show record btrace pt buffer-size".
* btrace.c: Include "rsp-low.h".
Include "inttypes.h".
(btrace_add_pc): Add forward declaration.
(pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
(pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
(btrace_compute_ftrace_pt): New.
(btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
(check_xml_btrace_version): Update version check.
(parse_xml_raw, parse_xml_btrace_pt_config_cpu)
(parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
(btrace_pt_config_cpu_attributes, btrace_pt_config_children)
(btrace_pt_children): New.
(btrace_children): Add support for "pt".
(parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
(btrace_conf_children): Add support for "pt".
* btrace.h: Include "intel-pt.h".
(btrace_pt_error): New.
* common/btrace-common.c (btrace_format_string, btrace_data_fini)
(btrace_data_empty): Support BTRACE_FORMAT_PT.
* common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
(struct btrace_config_pt): New.
(struct btrace_config)<pt>: New.
(struct btrace_data_pt_config, struct btrace_data_pt): New.
(struct btrace_data)<pt>: New.
* features/btrace-conf.dtd (btrace-conf)<pt>: New.
(pt): New.
* features/btrace.dtd (btrace)<pt>: New.
(pt, pt-config, cpu): New.
* nat/linux-btrace.c (perf_event_read, perf_event_read_all)
(perf_event_pt_event_type, kernel_supports_pt)
(linux_supports_pt): New.
(linux_supports_btrace): Support BTRACE_FORMAT_PT.
(linux_enable_bts): Free tinfo on error.
(linux_enable_pt): New.
(linux_enable_btrace): Support BTRACE_FORMAT_PT.
(linux_disable_pt): New.
(linux_disable_btrace): Support BTRACE_FORMAT_PT.
(linux_fill_btrace_pt_config, linux_read_pt): New.
(linux_read_btrace): Support BTRACE_FORMAT_PT.
* nat/linux-btrace.h (struct btrace_tinfo_pt): New.
(struct btrace_target_info)<pt>: New.
* record-btrace.c (set_record_btrace_pt_cmdlist)
(show_record_btrace_pt_cmdlist): New.
(record_btrace_print_pt_conf): New.
(record_btrace_print_conf): Support BTRACE_FORMAT_PT.
(btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
(cmd_record_btrace_pt_start): New.
(cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
(cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
(_initialize_record_btrace): Add new commands.
* remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
(remote_protocol_features): Add "Qbtrace:pt".
Add "Qbtrace-conf:pt:size".
(remote_supports_btrace): Support BTRACE_FORMAT_PT.
(btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
(remote_enable_btrace): Support BTRACE_FORMAT_PT.
(_initialize_remote): Add new commands.
gdbserver/
* linux-low.c: Include "rsp-low.h"
(linux_low_encode_pt_config, linux_low_encode_raw): New.
(linux_low_read_btrace): Support BTRACE_FORMAT_PT.
(linux_low_btrace_conf): Support BTRACE_FORMAT_PT.
(handle_btrace_enable_pt): New.
(handle_btrace_general_set): Support "pt".
(handle_btrace_conf_general_set): Support "pt:size".
doc/
* gdb.texinfo (Process Record and Replay): Spell out that variables
and registers are not available during btrace replay.
Describe the new "record btrace pt" command.
Describe the new "set|show record btrace pt buffer-size" options.
(General Query Packets): Describe the new Qbtrace:pt and
Qbtrace-conf:pt:size packets.
Expand "bts" to "Branch Trace Store".
Update the branch trace DTD.
Markus Metzger [Tue, 12 Nov 2013 15:58:45 +0000 (16:58 +0100)]
configure: check for libipt
Check for libipt, an Intel(R) Processor Trace decoder library. The sources
can be found on github at:
https://github.com/01org/processor-trace
gdb/
* configure.ac: Check for libipt
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in (LIBIPT): New.
(CLIBS): Add $LIBIPT.
* NEWS: document new configure options
Jan Kratochvil [Thu, 2 Jul 2015 06:01:35 +0000 (08:01 +0200)]
debug compile: Replace confusing debug message
It was found that from
(gdb) set debug compile 1
(gdb) compile code 1
[...]
allocated 0x7f bytes at 0x7ffff7ff9000 prot 5
allocated 0x38 bytes at 0x7ffff7ff8000 prot 1
lookup undefined ELF symbol "_GLOBAL_OFFSET_TABLE_"
allocated 0x10 bytes at 0x7ffff7ff7000 for registers
(gdb) _
the message 'lookup undefined ELF symbol' looks as an error to people,
including to myself once.
Change it to:
allocated 0x7f bytes at 0x7ffff7ff9000 prot 5
allocated 0x38 bytes at 0x7ffff7ff8000 prot 1
ELF symbol "_GLOBAL_OFFSET_TABLE_" relocated to zero
allocated 0x10 bytes at 0x7ffff7ff7000 for registers
(gdb) _
gdb/ChangeLog
2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile-object-load.c (compile_object_load): Replace debug
message "lookup undefined ELF symbol" by 3 more specific messages.
Kevin Buettner [Thu, 2 Jul 2015 00:46:23 +0000 (17:46 -0700)]
Tabify my ChangeLog entry for 2015-06-29.
Kevin Buettner [Wed, 1 Jul 2015 23:18:35 +0000 (16:18 -0700)]
rl78: Create a flags type for the psw register.
For the Renesas rl78 architecture, associate a flags type with the PSW
register. This will cause symbolic flags to be printed when using
the "info registers" command.
gdb/ChangeLog:
* rl78-tdep.c (struct gdbarch_tdep): Add new field, rl78_psw_type.
(rl78_register_type): Add case for RL78_PSW_REGNUM.
(rl78_gdbarch_init): Initialize rl78_psw_type.
GDB Administrator [Thu, 2 Jul 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Sandra Loosemore [Wed, 1 Jul 2015 23:11:47 +0000 (16:11 -0700)]
Assembler tests for Nios II R2
2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
Cesar Philippidis <cesar@codesourcery.com>
gas/testsuite/
* gas/nios2/add-r2.d: New.
* gas/nios2/align_fill-r2.d: New.
* gas/nios2/align_text-r2.d: New.
* gas/nios2/aligned_text-r2.d: New.
* gas/nios2/and-r2.d: New.
* gas/nios2/andc.d: New.
* gas/nios2/andc.s: New.
* gas/nios2/bmx.d: New.
* gas/nios2/bmx.s: New.
* gas/nios2/branch-r2.d: New.
* gas/nios2/break-r2.d: New.
* gas/nios2/bret-r2.d: New.
* gas/nios2/cache-r2.d: New.
* gas/nios2/cache-r2.s: New.
* gas/nios2/call-r2.d: New.
* gas/nios2/call26-r2.d: New.
* gas/nios2/call26_noat-r2.d: New.
* gas/nios2/call_noat-r2.d: New.
* gas/nios2/cdx_add.d: New.
* gas/nios2/cdx_add.s: New.
* gas/nios2/cdx_and.d: New.
* gas/nios2/cdx_and.s: New.
* gas/nios2/cdx_break.d: New.
* gas/nios2/cdx_break.s: New.
* gas/nios2/cdx_callr.d: New.
* gas/nios2/cdx_callr.s: New.
* gas/nios2/cdx_jmpr.d: New.
* gas/nios2/cdx_jmpr.s: New.
* gas/nios2/cdx_ldbu.d: New.
* gas/nios2/cdx_ldbu.s: New.
* gas/nios2/cdx_ldhu.d: New.
* gas/nios2/cdx_ldhu.s: New.
* gas/nios2/cdx_ldw.d: New.
* gas/nios2/cdx_ldw.s: New.
* gas/nios2/cdx_ldwsp.d: New.
* gas/nios2/cdx_ldwsp.s: New.
* gas/nios2/cdx_mov.d: New.
* gas/nios2/cdx_mov.s: New.
* gas/nios2/cdx_neg.d: New.
* gas/nios2/cdx_neg.s: New.
* gas/nios2/cdx_not.d: New.
* gas/nios2/cdx_not.s: New.
* gas/nios2/cdx_or.d: New.
* gas/nios2/cdx_or.s: New.
* gas/nios2/cdx_pop.d: New.
* gas/nios2/cdx_pop.s: New.
* gas/nios2/cdx_push.d: New.
* gas/nios2/cdx_push.s: New.
* gas/nios2/cdx_relax.d: New.
* gas/nios2/cdx_relax.s: New.
* gas/nios2/cdx_ret.d: New.
* gas/nios2/cdx_ret.s: New.
* gas/nios2/cdx_sll.d: New.
* gas/nios2/cdx_sll.s: New.
* gas/nios2/cdx_spaddi.d: New.
* gas/nios2/cdx_spaddi.s: New.
* gas/nios2/cdx_spdeci.d: New.
* gas/nios2/cdx_spdeci.s: New.
* gas/nios2/cdx_srl.d: New.
* gas/nios2/cdx_srl.s: New.
* gas/nios2/cdx_stb.d: New.
* gas/nios2/cdx_stb.s: New.
* gas/nios2/cdx_sth.d: New.
* gas/nios2/cdx_sth.s: New.
* gas/nios2/cdx_stw.d: New.
* gas/nios2/cdx_stw.s: New.
* gas/nios2/cdx_stwsp.d: New.
* gas/nios2/cdx_stwsp.s: New.
* gas/nios2/cdx_sub.d: New.
* gas/nios2/cdx_sub.s: New.
* gas/nios2/cdx_trap.d: New.
* gas/nios2/cdx_trap.s: New.
* gas/nios2/cdx_xor.d: New.
* gas/nios2/cdx_xor.s: New.
* gas/nios2/cmp-r2.d: New.
* gas/nios2/comments-r2.d: New.
* gas/nios2/complex-r2.d: New.
* gas/nios2/ctl-r2.d: New.
* gas/nios2/custom-r2.d: New.
* gas/nios2/eni.d: New.
* gas/nios2/eni.s: New.
* gas/nios2/etbt-r2.d: New.
* gas/nios2/flushda-r2.d: New.
* gas/nios2/jmp-r2.d: New.
* gas/nios2/ldb-r2.d: New.
* gas/nios2/ldb-r2.s: New.
* gas/nios2/ldh-r2.d: New.
* gas/nios2/ldh-r2.s: New.
* gas/nios2/ldw-r2.d: New.
* gas/nios2/ldw-r2.s: New.
* gas/nios2/ldwm.d: New.
* gas/nios2/ldwm.s: New.
* gas/nios2/lineseparator-r2.d: New.
* gas/nios2/movia-r2.d: New.
* gas/nios2/mpx.d: New.
* gas/nios2/mpx.s: New.
* gas/nios2/mul-r2.d: New.
* gas/nios2/nop-r2.d: New.
* gas/nios2/nop-r2.s: New.
* gas/nios2/nor-r2.d: New.
* gas/nios2/or-r2.d: New.
* gas/nios2/rdprs-r2.d: New.
* gas/nios2/rdprs-r2.s: New.
* gas/nios2/registers-r2.d: New.
* gas/nios2/ret-r2.d: New.
* gas/nios2/rotate-r2.d: New.
* gas/nios2/stb-r2.d: New.
* gas/nios2/stb-r2.s: New.
* gas/nios2/sth-r2.d: New.
* gas/nios2/sth-r2.s: New.
* gas/nios2/stw-r2.d: New.
* gas/nios2/stw-r2.s: New.
* gas/nios2/stwm.d: New.
* gas/nios2/stwm.s: New.
* gas/nios2/sub-r2.d: New.
* gas/nios2/sync-r2.d: New.
* gas/nios2/trap-r2.d: New.
* gas/nios2/tret-r2.d: New.
* gas/nios2/wrpie.d: New.
* gas/nios2/wrpie.s: New.
* gas/nios2/wrprs-r2.d: New.
* gas/nios2/xor-r2.d: New.
Sandra Loosemore [Wed, 1 Jul 2015 23:08:03 +0000 (16:08 -0700)]
Opcodes and assembler support for Nios II R2
2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
Cesar Philippidis <cesar@codesourcery.com>
gas/
* config/tc-nios2.c (nios2_min_align): New.
(nop): Replace with....
(nop_r1, nop_r2, nop_r2_cdx, nop32, nop16): New.
(nios2_align): Handle alignment on 2-byte boundaries when CDX
instructions may be present.
(s_nios2_align): Adjust reference to nop.
(CDXBRANCH, IS_CDXBRANCH): New.
(CDX_UBRANCH_SUBTYPE, CDX_CBRANCH_SUBTYPE): New.
(nios2_relax_subtype_size): Handle 2-byte CDX branches.
(nios2_relax_frag): Likewise.
(md_convert_frag): Handle R2 encodings.
(nios2_check_overflow): Check that low-order bits are zero
before applying rightshift from howto.
(nios2_check_overflow): Correct negative overflow calculation.
(nios2_diagnose_overflow): Handle signed_immed12_overflow. Issue
generic overflow messages for miscellaneous instruction formats.
(md_apply_fix): Recognize new R2 relocations. For pc_relative
relocations, store fixup in *valP.
(nios2_reglist_mask, nios2_reglist_dir): New.
(nios2_parse_reglist): New.
(nios2_parse_base_register): New.
(nios2_assemble_expression): Handle constant expressions designated
by BFD_RELOC_NONE.
(nios2_assemble_reg3): New.
(nios2_assemble_arg_c): Handle R2 instruction formats.
(nios2_assemble_arg_d): Likewise.
(nios2_assemble_arg_s): Likewise.
(nios2_assemble_arg_t): Likewise.
(nios2_assemble_arg_D): New.
(nios2_assemble_arg_S): New.
(nios2_assemble_arg_T): New.
(nios2_assemble_arg_i): Handle R2 instruction formats.
(nios2_assemble_arg_I): New.
(nios2_assemble_arg_u): Handle R2 instruction formats.
(nios2_assemble_arg_U): New.
(nios2_assemble_arg_V): New.
(nios2_assemble_arg_W): New.
(nios2_assemble_arg_X): New.
(nios2_assemble_arg_Y): New.
(nios2_assemble_arg_o): Handle R2 instruction formats.
(nios2_assemble_arg_O): New.
(nios2_assemble_arg_P): New.
(nios2_assemble_arg_j): Handle R2 instruction formats.
(nios2_assemble_arg_k): New.
(nios2_assemble_arg_l): Handle R2 instruction formats.
(nios2_assemble_arg_m): Likewise.
(nios2_assemble_arg_M): New.
(nios2_assemble_arg_N): New.
(nios2_assemble_arg_e): New.
(nios2_assemble_arg_f): New.
(nios2_assemble_arg_g): New.
(nios2_assemble_arg_h): New.
(nios2_assemble_arg_R): New.
(nios2_assemble_arg_B): New.
(nios2_assemble_args): Handle new argument letters.
(nios2_consume_arg): Likewise.
(nios2_translate_pseudo_insn): Avoid dereferencing null pointer
in error message.
(nios2_ps_insn_info_structs): Add nop.n.
(output_ubranch): Handle CDX branches.
(output_cbranch): Likewise.
(output_call): Handle R2 encodings.
(output_movia): Likewise.
(md_begin): Initialize nios2_min_align.
(md_assemble): Align to nios2_min_align. Adjust nios2_min_align
if a 16-bit instruction is seen.
(nios2_cons_align): Use appropriate nop pattern.
include/opcode/
* nios2.h (enum iw_format_type): Add R2 formats.
(enum overflow_type): Add signed_immed12_overflow and
enumeration_overflow for R2.
(struct nios2_opcode): Document new argument letters for R2.
(REG_3BIT, REG_LDWM, REG_POP): Define.
(includes): Include nios2r2.h.
(nios2_r2_opcodes, nios2_num_r2_opcodes): Declare.
(nios2_r2_asi_n_mappings, nios2_num_r2_asi_n_mappings): Declare.
(nios2_r2_shi_n_mappings, nios2_num_r2_shi_n_mappings): Declare.
(nios2_r2_andi_n_mappings, nios2_num_r2_andi_n_mappings): Declare.
(nios2_r2_reg3_mappings, nios2_num_r2_reg3_mappings): Declare.
(nios2_r2_reg_range_mappings, nios2_num_r2_reg_range_mappings):
Declare.
* nios2r2.h: New file.
opcodes/
* nios2-dis.c (nios2_extract_opcode): New.
(nios2_disassembler_state): New.
(nios2_find_opcode_hash): Use mach parameter to select correct
disassembler state.
(nios2_print_insn_arg): Extend to support new R2 argument letters
and formats.
(print_insn_nios2): Check for 16-bit instruction at end of memory.
* nios2-opc.c (nios2_builtin_regs): Add R2 register attributes.
(NIOS2_NUM_OPCODES): Rename to...
(NIOS2_NUM_R1_OPCODES): This.
(nios2_r2_opcodes): New.
(NIOS2_NUM_R2_OPCODES): New.
(nios2_num_r2_opcodes): New.
(nios2_r2_asi_n_mappings, nios2_num_r2_asi_n_mappings): New.
(nios2_r2_shi_n_mappings, nios2_num_r2_shi_n_mappings): New.
(nios2_r2_andi_n_mappings, nios2_num_r2_andi_n_mappings): New.
(nios2_r2_reg3_mappings, nios2_num_r2_reg3_mappings): New.
(nios2_r2_reg_range_mappings, nios2_num_r2_reg_range_mappings): New.
Sandra Loosemore [Wed, 1 Jul 2015 23:02:09 +0000 (16:02 -0700)]
Relocations for Nios II R2
2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
Cesar Philippidis <cesar@codesourcery.com>
bfd/
* bfd-in2.h: Regenerated.
* elf32-nios2.c (elf_nios2_howto_table_rel): Rename to...
(elf_nios2_r1_howto_table_rel): This.
(elf_nios2_r2_howto_table_rel): New.
(BFD_IS_R2): New.
(lookup_howto): Add ABFD parameter. Adjust to look up in either
the R1 or R2 relocation table, as determined by ABFD.
(nios2_reloc_map): Add R2 relocations.
(nios2_elf32_bfd_reloc_type_lookup): Do lookup using lookup_howto.
Pass it the ABFD parameter.
(nios2_elf32_bfd_reloc_name_lookup): Use ABFD to decide whether to
return an R1 or R2 relocation.
(nios2_elf32_info_to_howto): Do lookup using lookup_howto.
Pass it the ABFD parameter.
(nios2_elf32_do_call26_relocate): Check for alignment on a 4-byte
boundary.
(nios2_elf32_relocate_section): Adjust call to lookup_howto.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_NIOS2_R2_S12): New.
(BFD_RELOC_NIOS2_R2_I10_1_PCREL): New.
(BFD_RELOC_NIOS2_R2_T1I7_1_PCREL): New.
(BFD_RELOC_NIOS2_R2_T1I7_2): New.
(BFD_RELOC_NIOS2_R2_T2I4): New.
(BFD_RELOC_NIOS2_R2_T2I4_1): New.
(BFD_RELOC_NIOS2_R2_T2I4_2): New.
(BFD_RELOC_NIOS2_R2_X1I7_2): New.
(BFD_RELOC_NIOS2_R2_X2L5): New.
(BFD_RELOC_NIOS2_R2_F1I5_2): New.
(BFD_RELOC_NIOS2_R2_L5I4X1): New.
(BFD_RELOC_NIOS2_R2_T1X1I6): New.
(BFD_RELOC_NIOS2_R2_T1X1I6_2): New.
include/elf/
* nios2.h (R_NIOS2_R2_S12): New.
(R_NIOS2_R2_I10_1_PCREL): New.
(R_NIOS2_R2_T1I7_1_PCREL): New.
(R_NIOS2_R2_T1I7_2): New.
(R_NIOS2_R2_T2I4): New.
(R_NIOS2_R2_T2I4_1): New.
(R_NIOS2_R2_T2I4_2): New.
(R_NIOS2_R2_X1I7_2): New.
(R_NIOS2_R2_X2L5): New.
(R_NIOS2_R2_F1I5_2): New.
(R_NIOS2_R2_L5I4X1): New.
(R_NIOS2_R2_T1X1I6): New.
(R_NIOS2_R2_T1X1I6_2): New.
(R_NIOS2_ILLEGAL): Renumber.
Sandra Loosemore [Wed, 1 Jul 2015 22:55:28 +0000 (15:55 -0700)]
Add Nios II arch flags and compatibility tests
2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
Cesar Philippidis <cesar@codesourcery.com>
bfd/
* archures.c (bfd_mach_nios2r1, bfd_mach_nios2r2): New.
* bfd-in2.h: Regenerated.
* cpu-nios2.c (nios2_compatible): New.
(N): Use nios2_compatible instead of bfd_default_compatible.
(NIOS2R1_NEXT, NIOS2R2_NEXT): Define.
(arch_info_struct): New.
(bfd_nios2_arch): Chain to NIOS2R1_NEXT.
* elf32-nios2.c (is_nios2_elf): New.
(nios2_elf32_merge_private_bfd_data): New.
(nios2_elf32_object_p): New.
(bfd_elf32_bfd_merge_private_bfd_data): Define.
(elf_backend_object_p): Define.
gas/
* config/tc-nios2.c: Adjust includes.
(OPTION_MARCH): Define.
(md_longopts): Add -march option.
(nios2_architecture): New.
(nios2_use_arch): New.
(md_parse_option): Handle OPTION_MARCH.
(md_show_usage): Document -march.
(md_begin): Set arch in BFD.
(nios2_elf_final_processing): New.
* config/tc-nios2.h (elf_tc_final_processing): Define.
(nios2_elf_final_processing): New.
* doc/c-nios2.texi (-march): Add documentation.
include/elf/
* nios2.h (EF_NIOS2_ARCH_R1, EF_NIOS2_ARCH_R2): Define.
ld/testsuite/
* ld-nios2/mixed1a.d: New.
* ld-nios2/mixed1a.s: New.
* ld-nios2/mixed1b.d: New.
* ld-nios2/mixed1b.s: New.
* ld-nios2/nios2.exp: Build the new compatibility tests.
H.J. Lu [Wed, 1 Jul 2015 16:32:47 +0000 (09:32 -0700)]
Refactor elf_x86_64_convert_mov_to_lea
* elf64-x86-64.c (elf_x86_64_convert_mov_to_lea): Refactor.
Patrick Palka [Wed, 1 Jul 2015 12:02:09 +0000 (08:02 -0400)]
TUI: Make sure to update registers if frame information has changed
When I replaced TUI's frame_changed hook to fix PR tui/13378 I assumed
that there's no reason to refresh register information following a call
to "up", "down" or "frame". This assumption was made to fix the problem
of refreshing frame information twice following a sync-execution normal
stop (once in tui_normal_stop and then in tui_before_prompt) -- the
second refresh removing any highlights made by the first.
I was wrong about that -- GDB's snapshot of register information is
per-frame, and when the frame changes, registers do too (most
prominently the %rip and %rsp registers). So e.g. GDB 7.8 would
highlight such register changes after invoking "up", "down" or "frame",
and current GDB does not.
To fix this regression, this patch adds another (sufficient) condition
for refreshing register information: in
tui_refresh_frame_and_register_information, always refresh register
information if frame information has changed. This makes register
information get refreshed following a call to "up", "down" or "frame"
while still avoiding the "double refresh" issue following a normal stop.
This condition may seem to obsolete the existing registers_too_p
parameter, but it does not: following a normal stop, it is possible that
registers may have changed while frame information had not. We could be
on the exact same PC with different register values. The new condition
would not catch such a case, but the registers_too_p condition will. So
both conditions seem necessary (and either one is sufficient).
gdb/ChangeLog:
* tui/tui-hooks.c (tui_refresh_frame_and_register_information):
Update commentary. Always refresh the registers when frame
information has changed.
* tui/tui-stack.c (tui_show_frame_info): Update commentary.
Change return type to int. Return 1 if frame information has
changed, 1 otherwise.
(tui_before_prompt): Update commentary.
* tui/tui-stack.h (tui_show_frame_info): Change return type to
int.
GDB Administrator [Wed, 1 Jul 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Martin Galvan [Tue, 30 Jun 2015 21:20:47 +0000 (18:20 -0300)]
Remove the unneeded escaping of '[' and ']' characters in test_class_help
As these characters don't need to be escaped for strings
wrapped inside {} braces, we can remove the unneeded backslashes.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (test_class_help): Remove the unneeded escaping of
'[' and ']' characters.
Iain Buclaw [Tue, 30 Jun 2015 18:09:16 +0000 (20:09 +0200)]
Sync dlang demangling tests from upstream libiberty testsuite
gdb/testsuite/ChangeLog:
* gdb.dlang/demangle.exp: Sync tests from libiberty testsuite.
Patrick Palka [Tue, 30 Jun 2015 17:56:49 +0000 (13:56 -0400)]
Replace TUI's select_frame hook (PR tui/13378)
The select_frame hook is used by TUI to update TUI's frame and register
information following changes to the selected frame. The problem with
this hook is that it gets called after every single frame change, even
if the frame change is only temporary or internal. This is the primary
cause of flickering and slowdown when running the inferior under TUI
with conditional breakpoints set. Internal GDB events are the source of
many calls to select_frame and these internal events are triggered
frequently, especially when a few conditional breakpoints are set.
This patch removes the select_frame hook altogether and instead makes
the frame and register information get updated in two key places (using
observers): after an inferior stops, and right before displaying a
prompt. The latter hook covers the case when frame information must be
updated following a call to "up", "down" or "frame", and the former
covers the case when frame and register information must be updated
after a call to "continue", "step", etc. or after the inferior stops in
async execution mode. Together these hooks should cover all the cases
when frame information ought to be refreshed (and when the relevant
windows ought to be subsequently updated).
The print_frame_info_listing hook is also effectively obsolete now, but
it still must be set while the TUI is active because its caller
print_frame_info will otherwise assume that the CLI is active, and will
print the frame informaion accordingly. So this patch also sets the
print_frame_info_listing hook to a dummy callback, in lieu of outright
removing it yet.
Effectively, with this patch, frame/PC changes that do not immediately
precede an inferior-stop event or a prompt display event no longer cause
TUI's frame and register information to be updated.
And as a result of this change and of the previous change to
tui_show_frame_info, the TUI is much more disciplined about updating the
screen, and so the flicker as described in the PR is totally gone.
gdb/ChangeLog:
PR tui/13378
* frame.c (select_frame): Remove reference to
deprecated_selected_frame_level_changed_hook.
* frame.h (deprecated_selected_frame_level_changed_hook): Remove
declaration.
* stack.c (deprecated_selected_frame_level_changed_hook):
Likewise.
* tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
Rename to ...
(tui_refresh_frame_and_register_information): ... this. Bail
out if there is no stack. Don't update register information
unless registers_too_p is true.
(tui_print_frame_info_listing_hook): Rename to ...
(tui_dummy_print_frame_info_listing_hook): ... this.
(tui_before_prompt): New function.
(tui_normal_stop): New function.
(tui_before_prompt_observer): New observer.
(tui_normal_stop_observer): New observer.
(tui_install_hooks): Set
deprecated_print_frame_info_listing_hook to
tui_dummy_print_frame_info_listing_hook. Register
tui_before_prompt_observer to call tui_before_prompt and
tui_normal_stop_observer to call tui_normal_stop. Remove
reference to deprecated_selected_frame_level_changed_hook.
(tui_remove_hooks): Detach and unset tui_before_prompt_observer
and tui_normal_stop_observer. Remove reference to
deprecated_selected_frame_level_changed_hook.
Patrick Palka [Sat, 27 Jun 2015 00:38:30 +0000 (20:38 -0400)]
Be lazy about refreshing the windows in tui_show_frame_info (PR tui/13378)
tui_show_frame_info is responsible for updating the visible windows
following a change in frame information (that being the currently
selected frame, PC, line number, etc). Currently it always redraws and
refreshes each window even if frame information has not changed. This
behavior is inefficient and helps contribute to the occassional
flickering of the TUI as described in the mentioned PR.
This patch makes tui_show_frame_info refresh the windows only if frame
information has changed. Determining whether frame information has
changed is done indirectly by determining whether the locator has
changed. This approach is convenient and yet sensible because the
locator contains all the relevant info we need to check anyway: the
current PC, the line number, the name of the executable and the name of
the current function. Probably only the PC is really necessary to
check, but it doesn't hurt to check every field.
Effectively, with this patch, consecutive calls to select_frame with the
same frame/PC no longer cause TUI's frame information to be updated
multiple times.
gdb/ChangeLog:
PR tui/13378
* tui/tui-stack.c (tui_set_locator_info): Change prototype to
return an int instead of void. Return whether the locator
window has changed.
(tui_show_frame_info): If the locator info has not changed, then
bail out early to avoid refreshing the windows.
Patrick Palka [Sat, 27 Jun 2015 00:17:56 +0000 (20:17 -0400)]
Correctly initialize the TUI locator window
The call to tui_alloc_content in tui_set_locator_info passes
locator->type as the type of the window whose content is being
allocated. This may seem correct but it's actually not because when
this code path actually get executed locator->type has not yet been to
set LOCATOR_WIN so it defaults to 0 i.e. SRC_WIN. Thus we allocate the
content of the locator window as if it was the source window. This
oversight turns out not to be a big deal in practice but the patch that
follows depends on the locator's proc_name and full_name arrays to be
initialized to the empty string which is done by tui_alloc_content if
we pass to it LOCATOR_WIN.
This patch fixes this bug by explicitly passing LOCATOR_WIN to
tui_alloc_content.
gdb/ChangeLog:
* tui/tui-stack.c (tui_set_locator_info): Explicitly pass
LOCATOR_WIN to tui_alloc_content.
H.J. Lu [Tue, 30 Jun 2015 17:22:36 +0000 (10:22 -0700)]
Sync libdecnumber with gcc
* configure: Regenerated.
H.J. Lu [Tue, 30 Jun 2015 17:20:19 +0000 (10:20 -0700)]
Sync dfp.m4 with gcc
* dfp.m4 (enable_decimal_float): Also set to yes for
i?86*-*-elfiamcu target.
H.J. Lu [Tue, 30 Jun 2015 17:15:57 +0000 (10:15 -0700)]
Sync toplevel configure with gcc
* configure.ac (ospace_frag): Enable for i?86*-*-elfiamcu
target.
* configure: Regenerate.
Nick Clifton [Tue, 30 Jun 2015 16:12:47 +0000 (17:12 +0100)]
This fixes parsing a file containing ELF attributes with very large tag values.
PR binutils/18570
* elf-attrs.c (obj_attr_size): Use an unsigned int type for the tag.
(write_obj_attribute): Likewise.
(elf_new_obj_attr): Likewise.
(bfd_elf_get_obj_attr_int): Likewise.
(bfd_elf_add_obj_attr_int): Likewise.
(bfd_elf_add_obj_attr_string): Likewise.
(bfd_elf_add_obj_attr_int_string): Likewise.
(gnu_obj_attrs_arg_type): Likewise.
(_bfd_elf_obj_attrs_arg_type): Likewise.
(_bfd_elf_parse_attributes): Likewise.
(_bfd_elf_merge_unknown_attribute_list): Likewise.
* elf-bfd.h (struct obj_attribute_list): Likewise.
Update prototypes.
Amit Pawar [Tue, 30 Jun 2015 06:41:52 +0000 (12:11 +0530)]
Add support for monitorx/mwaitx instructions
gas/
* config/tc-i386.c (cpu_arch): Add .mwaitx.
(process_immext): Check operands for monitorx/mwaitx instructions.
* doc/c-i386.texi: Document mwaitx.
gas/testsuite/
* gas/i386/i386.exp: Add new mwaitx test cases.
* gas/i386/mwaitx.s: New.
* gas/i386/mwaitx-bdver4.d: New.
* gas/i386/x86-64-mwaitx.s: New.
* gas/i386/x86-64-mwaitx-bdver4.d: New.
* gas/i386/mwaitx-reg.s: New.
* gas/i386/mwaitx-reg.l: New.
* gas/i386/x86-64-mwaitx-reg.l: New.
* gas/i386/x86-64-mwaitx-reg.s: New.
* gas/i386/arch-13.s: Updated.
* gas/i386/arch-13.d: Updated.
* gas/i386/arch-13-znver1.d: Updated.
* gas/i386/x86-64-arch-3.s: Updated.
* gas/i386/x86-64-arch-3.d: Updated.
* gas/i386/x86-64-arch-3-znver1.d: Updated.
opcodes/
* i386-dis.c (OP_Mwaitx): New.
(rm_table): Add monitorx/mwaitx.
* i386-gen.c (cpu_flag_init): Add CpuMWAITX to CPU_BDVER4_FLAGS
and CPU_ZNVER1_FLAGS. Add CPU_MWAITX_FLAGS.
(operand_type_init): Add CpuMWAITX.
* i386-opc.h (CpuMWAITX): New.
(i386_cpu_flags): Add cpumwaitx.
* i386-opc.tbl: Add monitorx and mwaitx.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
Nick Clifton [Tue, 30 Jun 2015 10:25:18 +0000 (11:25 +0100)]
Add support for SADDR addressing to the RL78 port.
gas * config/rl78-parse.y: Tag all saddr expressions throughout.
(SET_SA): New.
(expr_is_saddr): Allow symbolic expressions.
* config/tc-rl78.c (md_apply_fix): Handle SADDR.
bfd * elf32-rl78.c (rl78_elf_howto_table): Add RH_SADDR.
(rl78_reloc_map): Add R_RL78_RH_SADDR.
* reloc.c: Add BFD_RELOC_RL78_SADDR.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
Yao Qi [Tue, 30 Jun 2015 08:24:43 +0000 (09:24 +0100)]
Handle media instructions in arm software single step.
This patch fixes PR 18605 which is about incorrectly decoding media
instructions in software single step.
gdb:
2015-06-30 Yao Qi <yao.qi@linaro.org>
PR tdep/18605
* arm-tdep.c (arm_get_next_pc_raw): Break for media
instructions.
Kevin Buettner [Mon, 29 Jun 2015 15:08:12 +0000 (08:08 -0700)]
Turn on dwarf2 unwinding for Renesas RX architecture
This change turns on dwarf2 unwinding in rx-tdep.c. I found it
necessary to add rx_dwarf_reg_to_regnum in order to cause PC to be
mapped correctly.
gdb/ChangeLog:
* rx-tdep.c (RX_PSW_REGNUM): New enum constant.
(rx_dwarf_reg_to_regnum): New function.
(rx_gdbarch_init): Register rx_dwarf_reg_to_regnum. Use dwarf2
unwinding.
Han Shen [Tue, 16 Jun 2015 22:00:58 +0000 (15:00 -0700)]
Patch for gold internal error while fixing erratum 843419.
The crash reason is that the insn to be moved to stub may be a
relocation spot, so instead of placing the origin insn (that is insn
before-relocation) to the stub, I have to place the relocated one.
Note the relocation involved is non-pc-relative, so it is safe to move
the relocated insn.
gold/ChangeLog:
2015-06-29 Han Shen <shenhan@google.com>
* AArch64.cc (Erratum_stub::Insn_utilities): New typedef.
(Erratum_stub::update_erratum_insn): New method.
(Stub_table::relocate_stubs): Modified to place relocated insn.
(AArch64_relobj::fix_errata): Modified gold_assert.
GDB Administrator [Tue, 30 Jun 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Mon, 29 Jun 2015 15:07:57 +0000 (16:07 +0100)]
PR threads/18127 - threads spawned by infcall end up stuck in "running" state
Refs:
https://sourceware.org/ml/gdb/2015-03/msg00024.html
https://sourceware.org/ml/gdb/2015-06/msg00005.html
On GNU/Linux, if an infcall spawns a thread, that thread ends up with
stuck running state. This happens because:
- when linux-nat.c detects a new thread, it marks them as running,
and does not report anything to the core.
- we skip finish_thread_state when the thread that is running the
infcall stops.
As result, that new thread ends up with stuck "running" state, even
though it really is stopped.
On Windows, _all_ threads end up stuck in running state, not just the
one that was spawned. That happens because when a new thread is
detected, unlike linux-nat.c, windows-nat.c reports
TARGET_WAITKIND_SPURIOUS to infrun. It's the fact that that event
does not cause a user-visible stop that triggers the problem. When
the target is re-resumed, we call set_running with a wildcard ptid,
which marks all thread as running. That set_running is not suppressed
because the (leader) thread being resumed does not have in_infcall
set. Later, when the infcall finally finishes successfully, nothing
marks all threads back to stopped.
We can trigger the same problem on all targets by having a thread
other than the one that is running the infcall report a breakpoint hit
to infrun, and then have that breakpoint not cause a stop. That's
what the included test does.
The fix is to stop GDB from suppressing the set_running calls while
doing an infcall, and then set the threads back to stopped when the
call finishes, iff they were originally stopped before the infcall
started. (Note the MI *running/*stopped event suppression isn't
affected.)
Tested on x86_64 GNU/Linux.
gdb/ChangeLog:
2015-06-29 Pedro Alves <palves@redhat.com>
PR threads/18127
* infcall.c (run_inferior_call): On infcall success, if the thread
was marked stopped before, reset it back to stopped.
* infrun.c (resume): Don't suppress the set_running calls when
doing an infcall.
(normal_stop): Only discard the finish_thread_state cleanup if the
infcall succeeded.
gdb/testsuite/ChangeLog:
2015-06-29 Pedro Alves <palves@redhat.com>
PR threads/18127
* gdb.threads/hand-call-new-thread.c: New file.
* gdb.threads/hand-call-new-thread.c: New file.
Pierre Langlois [Mon, 29 Jun 2015 09:47:51 +0000 (10:47 +0100)]
Fix email in ChangeLog entry.
Pierre Langlois [Mon, 29 Jun 2015 09:36:55 +0000 (10:36 +0100)]
[GDBServer][AArch64] Enable support for Z0 packets
This patch lets GDBServer handle software breakpoints instead of relying
on GDB.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_supports_z_point_type): Enable for
Z_PACKET_SW_BP.
Pierre Langlois [Mon, 29 Jun 2015 09:34:42 +0000 (10:34 +0100)]
[GDBServer][AArch64] Use the same break instruction as GDB
GDB uses a "brk #0" instruction to perform a software breakpoint while
GDBServer uses an illegal instruction. Both instructions should match.
When enabling support for the 'Z0' packet, we let GDBServer insert the
breakpoint instruction instead of GDB. And in case of permanent
breakpoints for example, GDB will check if a breakpoint is inserted in the
inferior with `program_breakpoint_here_p (gdbarch, address)', and
compare the instruction read from the inferior with the breakpoint
instruction.
On AArch64, instructions are always little endian so we need to
represent it as an array of bytes, as done in aarch64-tdep.c.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c: Remove comment about endianness.
(aarch64_breakpoint): Change type to gdb_byte[]. Set to "brk #0".
(aarch64_breakpoint_at): Change type of insn to gdb_byte[]. Use
memcmp.
Pierre Langlois [Mon, 29 Jun 2015 09:23:48 +0000 (10:23 +0100)]
Update my email address
gdb/ChangeLog:
* MAINTAINERS (Write After Approval): Update my email address.
GDB Administrator [Mon, 29 Jun 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Nick Clifton [Sun, 28 Jun 2015 18:14:36 +0000 (19:14 +0100)]
Add support for ARM v6 instructions.
* Makefile.in (SIM_EXTRA_CFLAGS): Add -lm.
* armdefs.h (ARMdval, ARMfval): New types.
(ARM_VFP_reg): New union.
(struct ARMul_State): Add VFP_Reg and FPSCR fields.
(VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor
macros for the new VFP_Reg field.
* armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT,
QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8,
USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX
instructions.
(handle_VFP_move): New function.
(ARMul_Emulate16): Add checks for newly supported v6
instructions. Add support for VMRS, VMOV and MRC instructions.
(Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when
operating in v6 mode.
* armemu.h (t_resolved): Define.
* armsupp.c: Include math.h.
(handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH,
VSTM, VLDM and VPOP instructions.
(ARMul_LDC): Test for co-processor 10 or 11 and pass call to the
new handle_VFP_xfer function.
(ARMul_STC): Likewise.
(handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS,
VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP,
VCMPE and VCVT instructions.
(ARMul_CDP): Test for co-processor 10 or 11 and pass call to the
new handle_VFP_op function.
* thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros.
(test_cond): New function. Tests a condition and returns non-zero
if the condition has been met.
(handle_IT_block): New function.
(in_IT_block): New function.
(IT_block_allow): New function.
(ThumbExpandImm): New function.
(handle_T2_insn): New function. Handles T2 thumb instructions.
(handle_v6_thumb_insn): Add next_instr and pc parameters.
(ARMul_ThumbDecode): Add support for IT blocks. Add support for
v6 instructions.
* wrapper.c (sim_create_inferior): Detect a thumb address and call
SETT appropriately.
H.J. Lu [Sun, 28 Jun 2015 13:30:10 +0000 (06:30 -0700)]
Remove COMPRESS_DEBUG_ZLIB
COMPRESS_DEBUG_ZLIB isn't needed. This patch removes COMPRESS_DEBUG_ZLIB
and replace COMPRESS_DEBUG_ZLIB with COMPRESS_DEBUG_GNU_ZLIB.
bfd/
* bfd-in.h (compressed_debug_section_type): Remove
COMPRESS_DEBUG_ZLIB.
* bfd-in2.h : Regenerated.
gas/
* as.c (parse_args): Replace COMPRESS_DEBUG_ZLIB with
COMPRESS_DEBUG_GNU_ZLIB.
* config/tc-i386.c (flag_compress_debug): Likewise.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option):
Replace COMPRESS_DEBUG_ZLIB with COMPRESS_DEBUG_GNU_ZLIB.
GDB Administrator [Sun, 28 Jun 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Sat, 27 Jun 2015 23:43:43 +0000 (16:43 -0700)]
Update ia64 gas tests
* gas/ia64/psn.d: Updated.
* gas/ia64/xdata-ilp32.d: Likewise.
H.J. Lu [Sat, 27 Jun 2015 23:24:50 +0000 (16:24 -0700)]
Update xtensa linker tests
* ld-xtensa/tlsbin.rd: Updated.
* ld-xtensa/tlspic.rd: Likewise.
GDB Administrator [Sat, 27 Jun 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Keith Seitz [Fri, 26 Jun 2015 17:27:45 +0000 (10:27 -0700)]
PR 16253 revisited
Last year a patch was submitted/approved/commited to eliminate
symbol_matches_domain which was causing this problem. It was later reverted
because it introduced a (severe) performance regression.
Recap:
(gdb) list
1 enum e {A,B,C} e;
2 int main (void) { return 0; }
3
(gdb) p e
Attempt to use a type name as an expression
The parser attempts to find a symbol named "e" of VAR_DOMAIN.
This gets passed down through lookup_symbol and (eventually) into
block_lookup_symbol_primary, which iterates over the block's dictionary
of symbols:
for (sym = dict_iter_name_first (block->dict, name, &dict_iter);
sym != NULL;
sym = dict_iter_name_next (name, &dict_iter))
{
if (symbol_matches_domain (SYMBOL_LANGUAGE (sym),
SYMBOL_DOMAIN (sym), domain))
return sym;
}
The problem here is that we have a symbol named "e" in both STRUCT_DOMAIN
and VAR_DOMAIN, and for languages like C++, Java, and Ada, where a tag name
may be used as an implicit typedef of the type, symbol_matches_domain ignores
the difference between VAR_DOMAIN and STRUCT_DOMAIN. As it happens, the
STRUCT_DOMAIN symbol is found first, considered a match, and that symbol is
returned to the parser, eliciting the (now dreaded) error message.
Since this bug exists specifically because we have both STRUCT and VAR_DOMAIN
symbols in a given block/CU, this patch rather simply/naively changes
block_lookup_symbol_primary so that it continues to search for an exact
domain match on the symbol if symbol_matches_domain returns a symbol
which does not exactly match the requested domain.
This "fixes" the immediate problem, but admittedly might uncover other,
related bugs. [Paranoia?] However, it causes no regressions (functional
or performance) in the test suite. A similar change has been made
to block_lookup_symbol for other cases in which this bug might appear.
The tests from the previous submission have been resurrected and updated.
However since we can still be given a matching symbol with a different domain
than requested, we cannot say that a symbol "was not found." The error
messages today will still be the (dreaded) "Attempt to use a type name..."
ChangeLog
PR 16253
* block.c (block_lookup_symbol): For non-function blocks,
continue to search for a symbol with an exact domain match
Otherwise, return any previously found "best domain" symbol.
(block_lookup_symbol_primary): Likewise.
testsuite/ChangeLog
PR 16253
* gdb.cp/var-tag-2.cc: New file.
* gdb.cp/var-tag-3.cc: New file.
* gdb.cp/var-tag-4.cc: New file.
* gdb.cp/var-tag.cc: New file.
* gdb.cp/var-tag.exp: New file.
Patrick Palka [Wed, 3 Jun 2015 02:49:15 +0000 (22:49 -0400)]
Add option to remove duplicate command history entries
This patch implements the new option "history remove-duplicates", which
controls the removal of duplicate history entries ("off" by default).
The motivation for this option is to be able to reduce the prevalence of
basic commands such as "up" and "down" in the history file. These
common commands crowd out more unique commands in the history file (when
the history file has a fixed size), and they make navigation of the
history file via ^P, ^N and ^R more inconvenient.
The option takes an integer denoting the number of history entries to
look back at for a history entry that is a duplicate of the latest one.
"history remove-duplicates 1" is equivalent to bash's ignoredups option,
and "history remove-duplicates unlimited" is equivalent to bash's
erasedups option.
[ I decided to go with this integer approach instead of a tri-state enum
because it's slightly more flexible and seemingly more intuitive than
leave/erase/ignore. ]
gdb/ChangeLog:
* NEWS: Mention the new option "history remove-duplicates".
* top.c (history_remove_duplicates): New static variable.
(show_history_remove_duplicates): New static function.
(gdb_add_history): Conditionally remove duplicate history
entries.
(init_main): Add "history remove-duplicates" option.
gdb/doc/ChangeLog:
* gdb.texinfo (Command History): Document the new option
"history remove-duplicates".
gdb/testsuite/ChangeLog:
* gdb.base/history-duplicates.exp: New test.
Patrick Palka [Mon, 22 Jun 2015 02:54:10 +0000 (22:54 -0400)]
Add tab completion for TUI's "focus" command
The implementation is pretty straightforward, with the only caveat being
that the "src", "cmd", "next" and "prev" entries get delibrately added
to the completion list even when the TUI has not yet been initialized
(i.e. has never been enabled during the session), since invoking the
"focus" command with these arguments already works when the TUI has not
yet been initialized.
gdb/ChangeLog:
* tui/tui-win.c (focus_completer): New static function.
(_initialize_tui_win): Set the completion function of the
"focus" command to focus_completer.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Test the completion of the "focus"
command.
Jan Kratochvil [Fri, 26 Jun 2015 13:11:14 +0000 (15:11 +0200)]
Do not skip prologue for asm (.S) files
GDB tries to skip prologue for .S files according to .debug_line but it then
places the breakpoint to a location where it is never hit.
This is because #defines in .S files cause prologue skipping which is
completely inappropriate, for s390x:
glibc/sysdeps/unix/syscall-template.S
78:/* This is a "normal" system call stub: if there is an error,
79: it returns -1 and sets errno. */
80:
81:T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
82: ret
00000000000f4210 T __select
Line Number Statements:
Extended opcode 2: set Address to 0xf41c8
Advance Line by 80 to 81
Copy
Advance PC by 102 to 0xf422e
Special opcode 6: advance Address by 0 to 0xf422e and Line by 1 to 82
Special opcode 34: advance Address by 2 to 0xf4230 and Line by 1 to 83
Advance PC by 38 to 0xf4256
Extended opcode 1: End of Sequence
Compilation Unit @ offset 0x28b3e0:
<0><28b3eb>: Abbrev Number: 1 (DW_TAG_compile_unit)
<28b3ec> DW_AT_stmt_list : 0x7b439
<28b3f0> DW_AT_low_pc : 0xf41c8
<28b3f8> DW_AT_high_pc : 0xf4256
<28b400> DW_AT_name : ../sysdeps/unix/syscall-template.S
<28b423> DW_AT_comp_dir : /usr/src/debug////////glibc-2.17-
c758a686/misc
<28b452> DW_AT_producer : GNU AS 2.23.52.0.1
<28b465> DW_AT_language : 32769 (MIPS assembler)
without debuginfo or with debuginfo and the fix - correct address:
(gdb) b select
Breakpoint 1 at 0xf4210
It is also where .dynsym+.symtab point to:
00000000000f4210 T __select
00000000000f4210 W select
with debuginfo, without the fix:
(gdb) b select
Breakpoint 1 at 0xf41c8: file ../sysdeps/unix/syscall-template.S, line 81.
One part is to behave for asm files similar way like for 'locations_valid':
/* Symtab has been compiled with both optimizations and debug info so that
GDB may stop skipping prologues as variables locations are valid already
at function entry points. */
unsigned int locations_valid : 1;
The other part is to extend the 'locations_valid'-like functionality more.
Both minsym_found and find_function_start_sal need to be patched, otherwise
their addresses do not match and GDB regresses on ppc64:
gdb/ChangeLog
2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
and language_asm..
* symtab.c (find_function_start_sal): Likewise.
gdb/testsuite/ChangeLog
2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/amd64-prologue-skip.S: New file.
* gdb.arch/amd64-prologue-skip.exp: New file.
H.J. Lu [Fri, 26 Jun 2015 12:39:45 +0000 (05:39 -0700)]
Compile-in IAMCU linker scripts
* emulparams/elf_iamcu.sh (COMPILE_IN): New.
Matthew Fortune [Thu, 11 Jun 2015 09:16:19 +0000 (10:16 +0100)]
Add support for DT_MIPS_RLD_MAP_REL.
This tag makes it possible to access the debug map when debugging position
independent executables.
bfd/
* elfxx-mips.c (_bfd_mips_elf_create_dynamic_sections): Use executable
instead of !shared to indicate an application vs shared library.
(_bfd_mips_elf_size_dynamic_sections): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Handle DT_MIPS_RLD_MAP_REL.
(_bfd_mips_elf_get_target_dtag): Likewise.
binutils/
* readelf.c (get_mips_dynamic_type): Handle DT_MIPS_RLD_MAP_REL.
include/
* elf/mips.h (DT_MIPS_RLD_MAP_REL): New macro.
ld/testsuite/
* ld-mips-elf/pic-and-nonpic-3b.ad: Adjust for extra dynamic tag.
* ld-mips-elf/pic-and-nonpic-4b.ad: Likewise.
* ld-mips-elf/pic-and-nonpic-5b.ad: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n32.ad: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n64.ad: Likewise.
* ld-mips-elf/pic-and-nonpic-6-o32.ad: Likewise.
* ld-mips-elf/tlsdyn-o32-1.d: Likewise.
* ld-mips-elf/tlsdyn-o32-1.got: Likewise.
* ld-mips-elf/tlsdyn-o32-2.d: Likewise.
* ld-mips-elf/tlsdyn-o32-2.got: Likewise.
* ld-mips-elf/tlsdyn-o32-3.d: Likewise.
* ld-mips-elf/tlsdyn-o32-3.got: Likewise.
* ld-mips-elf/tlsdyn-o32.d: Likewise.
* ld-mips-elf/tlsdyn-o32.got: Likewise.
* ld-mips-elf/pie-n32.d: New file.
* ld-mips-elf/pie-n64.d: Likewise.
* ld-mips-elf/pie-o32.d: Likewise.
* ld-mips-elf/pie.s: Likewise.
* ld-mips-elf/mips-elf.exp: Add new tests.
GDB Administrator [Fri, 26 Jun 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
DJ Delorie [Thu, 25 Jun 2015 21:20:15 +0000 (17:20 -0400)]
Fix REL handling for MSP430
* elf32-msp430.c (msp430_final_link_relocate): Fix comments. Fix
REL loads to match RELA stores.
H.J. Lu [Thu, 25 Jun 2015 19:12:43 +0000 (12:12 -0700)]
Don't set sh_size for .shstrtab twice
_bfd_elf_assign_file_positions_for_non_load will set the sh_size
field for .shstrtab section. There is need to initialize it in
_bfd_elf_compute_section_file_positions.
* elf.c (_bfd_elf_compute_section_file_positions): Don't
initialize sh_size for .shstrtab here.
Simon Marchi [Thu, 25 Jun 2015 17:33:14 +0000 (13:33 -0400)]
py-prettyprint.exp: Add is_address_zero_readable check
gdb/testsuite/ChangeLog:
* gdb.python/py-prettyprint.exp (run_lang_tests): Add
is_address_zero_readable check.
H.J. Lu [Thu, 25 Jun 2015 17:14:13 +0000 (10:14 -0700)]
Run ld-elf/strtab only on linux/gnu targets
Since not all ELF targets support -shared, we limit ld-elf/strtab to
linux and gnu targets.
* ld-elf/strtab.d: Only run on *-*-linux* and *-*-gnu* targets.
H.J. Lu [Thu, 25 Jun 2015 17:05:10 +0000 (10:05 -0700)]
Update .strtab section sizes in mmix tests
Since commit
ef10c3ace00674e8c3599c3bf95f06c87d68898b may reduce .strtab
section size, we need to adjust expected .strtab section sizes in mmix
tests.
gas/testsuite/
* gas/mmix/loc-3.d: Updated.
* gas/mmix/loc-5.d: Likewise.
ld/testsuite/
* ld-mmix/bspec1.d: Updated.
* ld-mmix/bspec2.d: Likewise.
* ld-mmix/undef-3.d: Likewise.
H.J. Lu [Thu, 25 Jun 2015 15:16:00 +0000 (08:16 -0700)]
Use strtab with GC and suffix merging for .strtab
This patch uses ELF strtab with GC and suffix merging support to create
ELF .strtab section. There is some small memory overhead to use ELF
strtab:
==14928== HEAP SUMMARY:
==14928== in use at exit: 3,276,318 bytes in 679 blocks
==14928== total heap usage: 1,544 allocs, 865 frees, 15,259,146 bytes allocated
vs.
==14936== HEAP SUMMARY:
==14936== in use at exit: 3,276,318 bytes in 679 blocks
==14936== total heap usage: 1,532 allocs, 853 frees, 15,026,402 bytes allocated
when running:
./ld-new -m elf_x86_64 -o tmpdir/ld-partial.o -r ldgram.o ldlex-wrapper.o lexsup.o ldlang.o mri.o ldctor.o ldmain.o plugin.o ldwrite.o ldexp.o ldemul.o ldver.o ldmisc.o ldfile.o ldcref.o eelf_x86_64.o eelf32_x86_64.o eelf_i386.o eelf_iamcu.o ei386linux.o eelf_l1om.o eelf_k1om.o ldbuildid.o
The results are
[32] .strtab STRTAB 0+ 3beff8 00407a 00 0 0 1
vs
[32] .strtab STRTAB 0+ 3beff8 0041d8 00 0 0 1
It reduces the .strtab size by 350 bytes, about 2%
Saving on libc.so from glibc is much more since libc.so has many alias
symbols with the same suffix. For x32 glibc,
[82] .strtab STRTAB 0+ 81b348 0159e7 00 0 0 1
vs
[82] .strtab STRTAB 0+ 81b8bc 019e72 00 0 0 1
It reduces the .strtab size by 17547 bytes, about 16%.
bfd/
PR gas/18451
* elf-bfd.h (elf_sym_strtab): New.
(elf_link_hash_table): Add strtabcount, strtabsize and
strtab.
(_bfd_elf_stringtab_init): Removed.
* elf.c (_bfd_elf_stringtab_init): Removed.
(_bfd_elf_compute_section_file_positions): Replace
bfd_strtab_hash/_bfd_elf_stringtab_init/_bfd_stringtab_free/
_bfd_stringtab_size with
elf_strtab_hash/_bfd_elf_strtab_init/_bfd_elf_strtab_free/
_bfd_elf_strtab_size. Use _bfd_elf_strtab_add,
_bfd_elf_strtab_finalize and _bfd_elf_strtab_offset to get
st_name.
(swap_out_syms): Likewise.
* elflink.c (elf_final_link_info): Replace bfd_strtab_hash
with elf_strtab_hash. Remove symbuf, symbuf_count,
symbuf_size and shndxbuf_size.
(elf_link_flush_output_syms): Removed.
(elf_link_output_sym): Renamed to ...
(elf_link_output_symstrtab): This. Replace _bfd_stringtab_add
with _bfd_elf_strtab_add. Don't flush symbols to the file nor
swap out symbols.
(elf_link_swap_symbols_out): New.
(elf_link_output_extsym): Replace elf_link_output_sym with
elf_link_output_symstrtab.
(elf_link_input_bfd): Likewise.
(elf_final_link_free): Replace _bfd_stringtab_free with
_bfd_elf_strtab_free. Remove symbuf.
(bfd_elf_final_link): Replace _bfd_elf_stringtab_init with
_bfd_elf_strtab_init. Don't set symbuf, symbuf_count,
symbuf_size nor shndxbuf_size. Initialize strtabsize and
strtab. Initialize symshndxbuf to -1 when number of sections
>= 64K. Replace elf_link_output_sym/elf_link_output_sym with
elf_link_output_symstrtab/elf_link_output_symstrtab. Don't
call elf_link_flush_output_syms. Call _bfd_elf_strtab_finalize
and elf_link_swap_symbols_out. Replace _bfd_stringtab_size
and _bfd_stringtab_emit with _bfd_elf_strtab_size and
_bfd_elf_strtab_emit.
gas/testsuite/
PR gas/18451
* gas/elf/elf.exp: Run strtab.
* gas/elf/strtab.d: New file.
* gas/elf/strtab.s: Likewise.
ld/testsuite/
PR gas/18451
* ld-elf/strtab.d: New file.
* ld-elf/strtab.s: Likewise.
Gary Benson [Thu, 25 Jun 2015 08:54:12 +0000 (09:54 +0100)]
Correctly notice empty sysroots in solib_find_1
Some parts of solib_find_1 should only operate if the sysroot
is nonempty after processing, but the logic that checked this
happened before trailing slashes were stripped so empty but
non-NULL sysroots were possible. This commit moves the logic
so it correctly notices all empty sysroots.
gdb/ChangeLog:
* solib.c (solib_find_1): Set local variable sysroot to NULL if
it is the empty string after trailing slashes have been stripped.
Gary Benson [Wed, 24 Jun 2015 15:06:49 +0000 (16:06 +0100)]
Remove gdb_sysroot NULL checks
Since
fed040c6a50399617d8265cbddc7fd21b3f134ef gdb_sysroot is
never NULL. This commit removes all gdb_sysroot NULL checks.
gdb/ChangeLog:
* exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
* infrun.c (follow_exec): Likewise.
* remote.c (remote_filesystem_is_local): Likewise.
* solib.c (solib_find_1): Likewise.
GDB Administrator [Thu, 25 Jun 2015 00:00:16 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Wed, 24 Jun 2015 22:27:44 +0000 (15:27 -0700)]
Remove the extra @section .cfi_lsda
Commit
2f0c68f23bb3132cd5ac466ca8775c0d9e4960cd added an extra @section
.cfi_lsda:
@subsection @code{.cfi_lsda @var{encoding} [, @var{exp}]}
+@section @code{.cfi_lsda @var{encoding} [, @var{exp}]}
@code{.cfi_lsda} defines LSDA and its encoding.
It shouldn't be there.
* doc/as.texinfo (.cfi_lsda): Remove the extra @section.
H.J. Lu [Wed, 24 Jun 2015 21:12:15 +0000 (14:12 -0700)]
Silence older GCC warning
* elf64-x86-64.c (elf_x86_64_convert_mov_to_lea): Silence older
GCC warning.
Keith Seitz [Thu, 4 Jun 2015 17:13:50 +0000 (10:13 -0700)]
Fix lrealpath memory leak in build_id_to_debug_bfd
Valgrind reports memory leaking from build_id_to_debug_bfd:
==7261== 88 bytes in 2 blocks are definitely lost in loss record 31,319 of 35,132
==7261== at 0x4A06BCF: malloc (vg_replace_malloc.c:296)
==7261== by 0x32CA88A9B9: strdup (strdup.c:42)
==7261== by 0xFE62AB: lrealpath (lrealpath.c:88)
==7261== by 0x7F7AD6: build_id_to_debug_bfd (build-id.c:116)
==7261== by 0x7F7BB5: find_separate_debug_file_by_buildid (build-id.c:149)
==7261== by 0x6D9382: elf_symfile_read (elfread.c:1348)
==7261== by 0x777F02: read_symbols (symfile.c:875)
==7261== by 0x778505: syms_from_objfile_1 (symfile.c:1078)
==7261== by 0x778548: syms_from_objfile (symfile.c:1094)
==7261== by 0x778746: symbol_file_add_with_addrs (symfile.c:1191)
==7261== by 0x77893B: symbol_file_add_from_bfd (symfile.c:1280)
==7261== by 0x8E51E3: solib_read_symbols (solib.c:706)
==7261== by 0x8E58AF: solib_add (solib.c:1029)
This occurs because commit
1be5090b in bfd, addressing PR 11983, started
taking a copy of the input filename instead of directly caching it. It
appears that this code was never updated to reflect that API change.
This simple patch creates a cleanup to free the return value for lrealpath.
gdb/ChangeLog
* build-id.c (build_id_to_debug_bfd): Add cleanup to free
return value from lrealpath.
H.J. Lu [Wed, 24 Jun 2015 20:37:05 +0000 (13:37 -0700)]
Keep .plt section and DT_PLTGOT for prelink
Since the .plt section and DT_PLTGOT are used by prelink to undo
prelinking for dynamic relocations, we must keep them even if there is
no PLT relocation. This patch reverted commit
a3747075a.
bfd/
* elf32-i386.c (elf_i386_allocate_dynrelocs): Always allocate
space for the first .plt entry.
(elf_i386_size_dynamic_sections): Always add DT_PLTGOT for .plt
section. Add DT_PLTRELSZ, DT_PLTREL and DT_JMPREL only if
there are PLT relocations.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Always
allocate space for the first .plt entry.
(elf_x86_64_size_dynamic_sections): Always add DT_PLTGOT for
.plt section. Add DT_PLTRELSZ, DT_PLTREL and DT_JMPREL only if
there are PLT relocations.
ld/testsuite/
* ld-i386/i386.exp: Run pltgot-2 for Linux targets.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pltgot-1.d: Updated.
* ld-x86-64/pltgot-1.d: Likewise.
* ld-i386/pltgot-2.d: New file.
* ld-x86-64/pltgot-2.d: Likewise.
Iain Buclaw [Wed, 24 Jun 2015 19:43:02 +0000 (21:43 +0200)]
Sync libiberty from GCC, replaying updates to configure scripts
H.J. Lu [Wed, 24 Jun 2015 17:13:55 +0000 (10:13 -0700)]
Don't convert R_X86_64_GOTPCREL if it will overflow
When converting "mov foo@GOTPCREL(%rip), %reg" to "lea foo(%rip), %reg"
with R_X86_64_PC32 relocation, it may overflow if the target section
is more than 2GB away. This patch estimates distance between mov
instruction and the target section. We convert R_X86_64_GOTPCREL to
R_X86_64_PC32 only if their distance is less than 2GB.
PR ld/18591
* elf64-x86-64.c (elf_x86_64_convert_mov_to_lea): Don't convert
R_X86_64_GOTPCREL to R_X86_64_PC32 if it will cause relocation
overflow.
Mike Frysinger [Wed, 24 Jun 2015 15:09:07 +0000 (22:09 +0700)]
sim: trace: drop unused trace_one_insn
Everyone has migrated to the split functions (trace_prefix + trace_generic)
a while ago, so we can drop this one now.
Mike Frysinger [Wed, 24 Jun 2015 14:59:26 +0000 (21:59 +0700)]
sim: trace: rename debug_printf fully
Rather than redirect using a define, just rename the symbol fully.
Mike Frysinger [Wed, 24 Jun 2015 13:52:21 +0000 (19:37 +0545)]
sim: trace: add a basic cpu register class
The bfin/msp430 ports already had trace logic set up for reading/writing
cpu registers, albeit using different unrelated levels (core & vpu). Add
a proper register class for these and for other ports.
Mike Frysinger [Tue, 23 Jun 2015 19:15:16 +0000 (01:00 +0545)]
sim: trace: add set of system helpers
Some code paths trace on a system instance and not a cpu instance (like
the events code), so add some helpers for those cases.
Mike Frysinger [Wed, 24 Jun 2015 14:23:12 +0000 (21:23 +0700)]
gdb: sim: merge the sysroot update logic together
Initialize the local sysroot fully before we start using it.
This keeps it all a bit simpler.
Mike Frysinger [Wed, 24 Jun 2015 13:21:38 +0000 (19:06 +0545)]
sim: trace: document alu/fpu/vpu trace options better
Make the acronyms clear for people.
Peter Bergner [Wed, 24 Jun 2015 14:15:29 +0000 (09:15 -0500)]
Add missing ChangeLog entries for yesterday's commmit below.
gdb/testsuite/
* gdb.arch/powerpc-power.exp <rfebb>: Fixup test results.
* gdb.arch/powerpc-power.s <rfebb>: Likewise.
Mike Frysinger [Tue, 23 Jun 2015 15:29:39 +0000 (11:29 -0400)]
gdb: sim: handle target sysroot prefix
The default gdb sysroot now sets itself to "target:". This works for
most remote targets, but when using the simulator, this causes problems
as the sim will attempt to search for that path.
Update the remote-sim logic to skip this leading prefix when it is found
so that the sysroot isn't passed in as an invalid value.
Yao Qi [Wed, 24 Jun 2015 13:53:03 +0000 (14:53 +0100)]
Call set_gdbarch_get_siginfo_type in linux_init_abi
linux_get_siginfo_type is installed to many linux gdbarch. This patch
is to move this to a common area linux-tdep.c:linux_init_abi, so that
linux_get_siginfo_type is installed to every linux gdbarch. If some
linux gdbarch needs its own version, please override it in
$ARCH_linux_init_abi. In the testsuite, we enable siginfo related
tests for all linux targets.
gdb:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
set_gdbarch_get_siginfo_type.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
* linux-tdep.c (linux_get_siginfo_type): Change it to static.
(linux_init_abi): Call set_gdbarch_get_siginfo_type.
* linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
gdb/testsuite:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (supports_get_siginfo_type): Return 1 for all
linux targets.
Yao Qi [Wed, 24 Jun 2015 13:53:03 +0000 (14:53 +0100)]
New proc supports_get_siginfo_type
Both siginfo-obj.exp and siginfo-thread.exp have the same code
checking the support of geting a type of siginfo for a given arch.
This patch is to move these code into a proc supports_get_siginfo_type.
gdb/testsuite:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (supports_get_siginfo_type): New proc.
* gdb.base/siginfo-obj.exp: Invoke supports_get_siginfo_type.
* gdb.base/siginfo-thread.exp: Likewise.
Gary Benson [Wed, 24 Jun 2015 10:59:03 +0000 (11:59 +0100)]
Remove redundant include directives.
stdint.h was added to common-defs.h some months ago and should
no longer be included directly by any file.
gdb_assert.h was added to common-defs.h nearly a year ago, but
three includes have crept in since then.
This commit removes all such redundant include directives.
gdb/ChangeLog:
* common/buffer.c (stdint.h): Do not include.
* common/print-utils.c (stdint.h): Likewise.
* compile/compile-c-symbols.c (gdb_assert.h): Likewise.
* compile/compile-c-types.c (gdb_assert.h): Likewise.
* ft32-tdep.c (gdb_assert.h): Likewise.
* guile/scm-utils.c (stdint.h): Likewise.
* i386-linux-tdep.c (stdint.h): Likewise.
* i386-tdep.c (stdint.h): Likewise.
* nat/linux-btrace.c (stdint.h): Likewise.
* nat/linux-btrace.h (stdint.h): Likewise.
* nat/linux-ptrace.c (stdint.h): Likewise.
* nat/mips-linux-watch.h (stdint.h): Likewise.
* ppc-linux-nat.c (stdint.h): Likewise.
* python/python-internal.h (stdint.h): Likewise.
* stub-termcap.c (stdlib.h): Likewise.
* target/target.h (stdint.h): Likewise.
* xtensa-linux-nat.c (stdint.h): Likewise.
gdb/gdbserver/ChangeLog:
* linux-i386-ipa.c (stdint.h): Do not include.
* lynx-i386-low.c (stdint.h): Likewise.
* lynx-ppc-low.c (stdint.h): Likewise.
* mem-break.c (stdint.h): Likewise.
* thread-db.c (stdint.h): Likewise.
* tracepoint.c (stdint.h): Likewise.
* win32-low.c (stdint.h): Likewise.
GDB Administrator [Wed, 24 Jun 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Patrick Palka [Tue, 23 Jun 2015 14:01:38 +0000 (10:01 -0400)]
Fix GDBHISTSIZE test failure on i686
The test
test_histsize_history_setting "
99999999999999999999999999999999999" "unlimited"
was failing on i686 because the condition in init_history() for
determining whether to map a large GDBHISTSIZE value to infinity was
long var = strtol (tmpenv);
if (var > INT_MAX)
history_size = unlimited;
but this condition is never true on i686 because INT_MAX == LONG_MAX.
So in order to properly map large out-of-range values of GDBHISTSIZE to
infinity on targets where LONG_MAX > INT_MAX as well as on i686, we have
to instead change the above condition to
if (var > INT_MAX
|| (var == INT_MAX && errno == ERANGE))
history_size = unlimited;
gdb/ChangeLog:
* top.c (init_history): Look at errno after calling strtol to
properly map large GDBHISTSIZE values to infinity.
Mike Frysinger [Tue, 23 Jun 2015 18:51:06 +0000 (00:36 +0545)]
sim: common: replace SIM_FILTER_PATH with lbasename
This helper macro has largely the same behavior as libiberty's lbasename.
There is a slight nuance related to colons, but it's not clear what the
point of that is, and the code implies that it just wants the basename.
Mike Frysinger [Tue, 23 Jun 2015 17:58:48 +0000 (23:43 +0545)]
sim: use AS_HELP_STRING everywhere
This helps standardize the configure --help output.
Doug Evans [Tue, 23 Jun 2015 18:36:49 +0000 (11:36 -0700)]
inferior.h (struct inferior_suspend_state): Delete, unused.
gdb/ChangeLog:
* inferior.h (struct inferior_suspend_state): Delete, unused.
All references deleted.
Peter Bergner [Tue, 23 Jun 2015 18:33:05 +0000 (13:33 -0500)]
Fix rfebb gdb test cases.
The following patch fixed the assembly / disassembly of the rfebb instruction:
https://sourceware.org/ml/binutils/2015-06/msg00190.html
This patch updates the gdb testsuite to match the new disassembly behavior.
gdb/testsuite/
* gdb.arch/powerpc-power.exp <rfebb>: Fixup test results.
* gdb.arch/powerpc-power.s <rfebb>: Likewise.
Mike Frysinger [Tue, 23 Jun 2015 17:57:29 +0000 (23:42 +0545)]
sim: trace: do not enable internal debug by default
Since --trace-debug is for people hacking on the sim sources rather than
people just using the sim, default it to off. This matches the behavior
of other debug knobs we have.
Mike Frysinger [Tue, 23 Jun 2015 17:54:52 +0000 (23:39 +0545)]
sim: assume recentish compiler/systems
Assume the build system supports stdint.h/stdarg.h as those have been
around long enough and we don't care about pre-stdc compilers anymore.
Mike Frysinger [Sun, 21 Jun 2015 18:13:03 +0000 (14:13 -0400)]
gdb: microblaze: delete useless stubs
These don't accomplish anything the common core doesn't already, so
punt them as they purely waste code.
Yao Qi [Tue, 23 Jun 2015 13:03:11 +0000 (14:03 +0100)]
Convert have_ptrace_getregset to a tri-state boolean
have_ptrace_getregset is a tri-state variable (-1, 0, 1), and we have
some conditions like "if (have_ptrace_getregset)", which is not correct.
I'll explain why it is not correct in the following example. This fix
to this problem to replace the test (have_ptrace_getregset) to test
(have_ptrace_getregset == 1) or (have_ptrace_getregset == -1) etc.
However Doug thinks it hinders readability
https://sourceware.org/ml/gdb-patches/2015-05/msg00692.html so I decide
to add a new enum tribool and change have_ptrace_getregset to it, in
order to make these tests more readable.
have_ptrace_getregset is initialised to -1, and is adjusted to 0 or 1 in
$ARCH_linux_read_description according to the capability of the kernel.
However, it is possible that have_ptrace_getregset is used before it is
set to 0 or 1, which means it is still -1. This is shown below.
(gdb) run
Starting program: gdb/testsuite/gdb.base/break
Breakpoint 2, amd64_linux_fetch_inferior_registers (ops=0xceaa80, regcache=0xe72000, regnum=16) at git/gdb/amd64-linux-nat.c:128
128 {
top?p have_ptrace_getregset
$1 = TRIBOOL_UNKNOWN
top?c
Continuing.
Breakpoint 2, amd64_linux_fetch_inferior_registers (ops=0xceaa80, regcache=0xe72000, regnum=16) at git/gdb/amd64-linux-nat.c:128
128 {
top?c
Continuing.
Breakpoint 1, x86_linux_read_description (ops=0xceaa80) at git/gdb/x86-linux-nat.c:117
117 {
PTRACE_GETREGSET command is used even GDB doesn't know whether
PTRACE_GETREGSET is supported or not. It is wrong, but works on x86.
However it doesn't work on arm-linux if the kernel doesn't support
PTRACE_GETREGSET at all. We'll get:
(gdb) run
Starting program: gdb/testsuite/gdb.base/break
warning: Unable to fetch general register.
PC register is not available
gdb:
2015-06-23 Yao Qi <yao.qi@linaro.org>
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
(amd64_linux_store_inferior_registers): Likewise.
* arm-linux-nat.c (fetch_fpregister): Likewise.
(fetch_fpregs, store_fpregister): Likewise.
(store_fpregister, store_fpregs): Likewise.
(fetch_register, fetch_regs): Likewise.
(store_register, store_regs): Likewise.
(fetch_vfp_regs, store_vfp_regs): Likewise.
(arm_linux_read_description): Check have_ptrace_getregset is
TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
or TRIBOOL_FALSE.
* i386-linux-nat.c (fetch_xstateregs): Check
have_ptrace_getregset is not TRIBOOL_TRUE.
(store_xstateregs): Likewise.
* linux-nat.c (have_ptrace_getregset): Change its type to
enum tribool.
* linux-nat.h (tribool): New enum.
* x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
Check whether have_ptrace_getregset is TRIBOOL_TRUE.
Jiong Wang [Tue, 23 Jun 2015 11:12:06 +0000 (12:12 +0100)]
[AArch64] Generate DT_TEXTREL for relocation against read-only section
2015-06-23 Jiong Wang <jiong.wang@arm.com>
bfd/
* elfnn-aarch64.c (aarch64_readonly_dynrelocs): New function.
(elfNN_aarch64_size_dynamic_sections): Traverse hash table to check
relocations against read-only sections.
ld/testsuite/
* ld-aarch64/dt_textrel.s: New testcase.
* ld-aarch64/dt_textrel.d: New expectation file.
* ld-aarch64/aarch64-elf.exp: Run new testcase.
GDB Administrator [Tue, 23 Jun 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Peter Bergner [Mon, 22 Jun 2015 19:55:24 +0000 (14:55 -0500)]
PPC sync instruction accepts invalid and incompatible operands
ISA 2.07 added a new category called Elemental Memory Barriers that modifies
the sync instruction to accept an additional operand ESYNC. Edmar added
support for this insruction varient here:
https://sourceware.org/ml/binutils/2012-02/msg00221.html
Looking at this closer, I see that the insert_ls() function is misnamed
(since it's attached to the ESYNC operand, not the LS operand) but more
importantly, it is silently modifying the LS operand value behind the
users back when the LS operand is either invalid or is incompatible with
the new ESYNC operand. The ISA 2.07 doc has an Assembler Note that clearly
states that assemblers that support the ESYNC operand should report all
invalid uses of LS and ESYNC. This patch changes the assembler to
error out on invalid and incompatible operand usage.
opcodes/
* ppc-opc.c (insert_ls): Test for invalid LS operands.
(insert_esync): New function.
(LS, WC): Use insert_ls.
(ESYNC): Use insert_esync.
gas/testsuite/
* gas/ppc/e6500.s <sync>: Fix invalid test.
* gas/ppc/e6500.d: Likewise.
Nick Clifton [Mon, 22 Jun 2015 15:53:27 +0000 (16:53 +0100)]
Stop "objdump -d" from disassembling past a symbolic address.
include * dis-asm.h (struct disassemble_info): Add stop_vma field.
binuti * objdump.c (disassemble_bytes): Set the stop_vma field in the
disassemble_info structure when disassembling code sections with
-d.
* doc/binutils.texi (objdump): Document the discrepancy between -d
and -D.
opcodes * dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the
requested region lies beyond it.
* bfin-dis.c (print_insn_bfin): Ignore sysop instructions when
looking for 32-bit insns.
* mcore-dis.c (print_insn_mcore): Disable stop_vma when reading
data.
* sh-dis.c (print_insn_sh): Likewise.
* tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading
blocks of instructions.
* vax-dis.c (print_insn_vax): Check that the requested address
does not clash with the stop_vma.
tests * gas/arm/backslash-at.s: Add extra .byte directives so that the
foo symbol does not appear to point half way through an
instruction.
* gas/arm/backslash-at.d: Update expected disassembly.
* gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/ilp32/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
Yao Qi [Tue, 28 Apr 2015 09:59:04 +0000 (10:59 +0100)]
Add comments on using board file remote-gdbserver-on-localhost.exp
This commit is to add comments on using this board file and the
requirements on localhost.
gdb/testsuite:
2015-06-22 Yao Qi <yao.qi@linaro.org>
* boards/remote-gdbserver-on-localhost.exp: Add comments.
Yao Qi [Mon, 22 Jun 2015 12:41:33 +0000 (13:41 +0100)]
Don't skip hw breakpoint/watchpoint tests for aarch64 target
This patch is to let skip_hw_breakpoint_tests and skip_hw_watchpoint_tests
return 0 for aarch64 target, since aarch64 has HW watchpoint and
breakpoint registers.
With this patch applied, about 1560 watchpoint/breakpoint related tests
become enabled on aarch64-linux native testing.
gdb/testsuite:
2015-06-22 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (skip_hw_breakpoint_tests): Return 0 for target
aarch64*-*-*.
(skip_hw_watchpoint_tests): Likewise.
GDB Administrator [Mon, 22 Jun 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Mike Frysinger [Sat, 20 Jun 2015 09:36:26 +0000 (15:21 +0545)]
sim: common: add basic model assert
If the configured in default doesn't match a known value, throw an
assertion failure rather than segfaulting deeper down.
Mike Frysinger [Sat, 20 Jun 2015 03:48:04 +0000 (09:33 +0545)]
sim: common: use standard intXX_t types for signedXX
Let's assume that the system supports the POSIX int8/16/32/64_t types
as this collapses the logic significantly.
This page took 0.051517 seconds and 4 git commands to generate.