Kuninori Morimoto [Wed, 4 Dec 2013 01:28:59 +0000 (17:28 -0800)] 
ARM: shmobile: armadillo: add FSI support for DTS
This patch support FSI-WM8978 with simple audio card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 4 Dec 2013 01:28:41 +0000 (17:28 -0800)]
ARM: shmobile: r8a7740: add FSI support via DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 28 Nov 2013 16:37:51 +0000 (17:37 +0100)] 
ARM: shmobile: emev2: Setup internal peripheral interrupts as level high
Interrupts generated by SoC internal devices are currently marked as
IRQ_TYPE_NONE. As they're level-triggered and active-high, mark them as
such.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 28 Nov 2013 16:37:50 +0000 (17:37 +0100)]
ARM: shmobile: emev2: Use interrupt macros in DT files
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 28 Nov 2013 16:22:13 +0000 (17:22 +0100)]
ARM: shmobile: Use interrupt macros in r8a73a4 and r8a7778 DT files
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Thu, 21 Nov 2013 05:22:00 +0000 (14:22 +0900)] 
ARM: shmobile: Fix r8a7791 GPIO resources in DTS
The r8a7791 GPIO resources are currently incorrect. Fix that
by making them match the English r8a7791 v0.31 data sheet.
Tested with GPIO LED using Koelsch DT reference.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms@verge.net.au>
Magnus Damm [Thu, 31 Oct 2013 03:24:36 +0000 (12:24 +0900)]
ARM: shmobile: Include all 4 GiB of memory on Lager DT Ref
Add 2GiB of DRAM at 0x1_8000_0000 to support the full 4GiB
of Lager system memory in case of DT Reference.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Thu, 31 Oct 2013 03:21:41 +0000 (12:21 +0900)]
ARM: shmobile: Include all 4 GiB of memory on Lager
Add 2GiB of DRAM at 0x1_8000_0000 to support the full 4GiB
of Lager system memory.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Takashi Yoshii [Thu, 31 Oct 2013 03:15:49 +0000 (12:15 +0900)] 
ARM: shmobile: Include all 2 GiB of memory on APE6EVM
Add 1GiB of DRAM at 0x2_0000_0000 to support the full 2GiB
of APE6EVM system memory.
Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Thu, 31 Oct 2013 03:18:41 +0000 (12:18 +0900)]
ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref
Add 1GiB of DRAM at 0x2_0000_0000 to support the full 2GiB
of APE6EVM system memory also in case of DT reference.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 26 Nov 2013 01:21:19 +0000 (02:21 +0100)]
ARM: shmobile: kzm9g-reference: Add GPIO keys to DT
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 26 Nov 2013 01:21:18 +0000 (02:21 +0100)]
ARM: shmobile: kzm9g-reference: Add PCF8575 GPIO extender to DT
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Thu, 21 Nov 2013 00:44:04 +0000 (09:44 +0900)]
ARM: shmobile: Koelsch DT reference GPIO LED support
Add led6, led7 and led8 to the Koelsch DT reference board support.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 13 Nov 2013 23:03:45 +0000 (08:03 +0900)]
ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D
Use the gpio-keys driver to support the 4 pins on the
dip switch DSW2 which is mounted on the KZM9D board.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 19 Nov 2013 12:59:49 +0000 (13:59 +0100)]
ARM: shmobile: armadillo-reference: Use low level IRQ for ST1231
The device is configured to generate an active-low interrupt signal that
needs to be acknowledged by the host. Configure the IRQ to trigger on
low level.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Nov 2013 00:07:40 +0000 (09:07 +0900)]
ARM: shmobile: Use r8a7790 suffix for IRQC compat string
Add "renesas,irqc-r8a7790" to the compatible string for IRQC
in case of r8a7790. This makes the IRQC follow the same style
as the other devices and also makes it more future proof.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Nov 2013 00:05:53 +0000 (09:05 +0900)]
ARM: shmobile: Use r8a7790 suffix for MMCIF compat string
Add "renesas,mmcif-r8a7790" to the compatible string for MMCIF
in case of r8a7790. This makes the MMCIF follow the same style
as the other devices and also makes it more future proof.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Nov 2013 07:59:48 +0000 (16:59 +0900)]
ARM: shmobile: Add r8a7791 thermal device node to DTS
Hook up the r8a7791 thermal sensor to the DTS.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Nov 2013 07:59:30 +0000 (16:59 +0900)]
ARM: shmobile: Add r8a7790 thermal device node to DTS
Hook up the r8a7790 thermal sensor to the DTS.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Nov 2013 07:36:59 +0000 (16:36 +0900)]
ARM: shmobile: Configure r8a7791 PFC on Koelsch via DTS
Configure the "D" set of data signals for SCIF0 and SCIF1
on the Koelsch board to setup pinctrl serial console bits.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Nov 2013 04:18:05 +0000 (13:18 +0900)]
ARM: shmobile: Use r8a7791 suffix for IRQC compat string
Add "renesas,irqc-r8a7791" to the compatible string for IRQC
in case of r8a7791. This makes the IRQC follow the same style
as the other devices and also makes it more future proof.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 20 Nov 2013 03:18:09 +0000 (19:18 -0800)]
ARM: shmobile: sh73a0: fixup sdhi compatible name
sh73a0 != r8a7740
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 20 Nov 2013 03:17:55 +0000 (19:17 -0800)]
ARM: shmobile: marzen: remove SDHI0 WP pin setting
WP pin is not implemented on Marzen
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 20 Nov 2013 03:17:41 +0000 (19:17 -0800)]
ARM: shmobile: marzen: remove SDHI0 WP pin setting from DTS
WP pin is not implemented on Marzen
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sat, 9 Nov 2013 12:23:58 +0000 (13:23 +0100)]
ARM: shmobile: kzm9g-reference: Use falling edge IRQ for LAN9221
The device is configured to generate an active-low interrupt signal that
is automatically deasserted without requiring any action from the host.
Configure the IRQ to trigger on falling edge.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sat, 9 Nov 2013 12:23:57 +0000 (13:23 +0100)]
ARM: shmobile: bockw-reference: Use falling edge IRQ for LAN9221
The device is configured to generate an active-low interrupt signal that
is automatically deasserted without requiring any action from the host.
Configure the IRQ to trigger on falling edge.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sat, 9 Nov 2013 12:23:56 +0000 (13:23 +0100)]
ARM: shmobile: marzen-reference: Use falling edge IRQ for LAN9221
The device is configured to generate an active-low interrupt signal that
is automatically deasserted without requiring any action from the host.
Use falling edge trigger as that is the configuration currently used on
the board.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sat, 9 Nov 2013 12:23:55 +0000 (13:23 +0100)]
ARM: shmobile: Use interrupt macros in board DT files
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 19 Nov 2013 02:18:25 +0000 (03:18 +0100)]
ARM: shmobile: Use interrupt macros in SoC DT files
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sat, 9 Nov 2013 12:23:53 +0000 (13:23 +0100)]
ARM: shmobile: Use #include in device tree sources
In order to allow usage of the preprocessor in the SoC device tree
sources, switch from /include/ to #include.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 1 Nov 2013 01:22:53 +0000 (18:22 -0700)]
ARM: shmobile: bockw: enable HSPI0 on DTS
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 1 Nov 2013 01:22:21 +0000 (18:22 -0700)]
ARM: shmobile: r8a7778: add HSPI suppport on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 4 Oct 2013 06:44:15 +0000 (23:44 -0700)]
ARM: shmobile: r8a7778: add I2C support on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Takashi Yoshii [Tue, 8 Oct 2013 05:33:07 +0000 (14:33 +0900)]
ARM: shmobile: emev2: Add clock tree description in DT
Add minimum clock tree description to .dts file.
This provides same set of clocks as current sh-clkfwk version .c
code does.
Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:38:16 +0000 (19:38 -0700)]
ARM: shmobile: lager: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:38:04 +0000 (19:38 -0700)]
ARM: shmobile: marzen: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:37:48 +0000 (19:37 -0700)]
ARM: shmobile: bockw: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:37:39 +0000 (19:37 -0700)]
ARM: shmobile: kzm9g: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:37:26 +0000 (19:37 -0700)]
ARM: shmobile: ape6evm: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:37:14 +0000 (19:37 -0700)]
ARM: shmobile: armadillo: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name.
This patch removed un-used "touchscreen" label
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:36:22 +0000 (19:36 -0700)]
ARM: shmobile: sh73a0: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name and related clock.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:36:13 +0000 (19:36 -0700)]
ARM: shmobile: r8a7790: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name and related clock.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:36:02 +0000 (19:36 -0700)]
ARM: shmobile: r8a7779: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name and related clock.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:35:42 +0000 (19:35 -0700)]
ARM: shmobile: r8a7778: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name and related clock.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:35:31 +0000 (19:35 -0700)]
ARM: shmobile: r8a73a4: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name and related clock.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 22 Oct 2013 02:35:08 +0000 (19:35 -0700)]
ARM: shmobile: r8a7740: tidyup DT node naming
According to ePAPR spec,
this patch tidies up DT node name and related clock.
This patch also adds missing SDHI2 entry
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 11 Oct 2013 06:36:44 +0000 (23:36 -0700)]
ARM: shmobile: marzen: add SDHI support on DTS
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 11 Oct 2013 06:36:22 +0000 (23:36 -0700)]
ARM: shmobile: r8a7779: add SDHI support on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 11 Oct 2013 06:36:01 +0000 (23:36 -0700)]
ARM: shmobile: bockw: add SDHI support on DTS
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 11 Oct 2013 06:35:46 +0000 (23:35 -0700)]
ARM: shmobile: r8a7778: add SDHI support on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 11 Oct 2013 06:34:33 +0000 (23:34 -0700)]
ARM: shmobile: bockw: fixup MMC pin conflict on DTS
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 4 Oct 2013 01:32:34 +0000 (18:32 -0700)]
ARM: shmobile: bockw: add MMCIF support on DTS
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 4 Oct 2013 01:32:22 +0000 (18:32 -0700)]
ARM: shmobile: r8a7778: add MMCIF support on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 4 Oct 2013 01:32:01 +0000 (18:32 -0700)]
ARM: shmobile: bockw: remove manual PFC settings on reference
Current Bock-W reference is calling PFC initializer manually,
but now, it can use DTS PFC.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 4 Oct 2013 01:31:16 +0000 (18:31 -0700)]
ARM: shmobile: bockw: add default PFC settings on DTS
SCIF0 PFC setting is needed as default
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 3 Oct 2013 17:35:41 +0000 (19:35 +0200)]
ARM: shmobile: r8a7778: Fix pin control device address in DT
The PFC device is erroneously declared at address 0xfffc000 instead of
0xfffc0000. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Tue, 8 Oct 2013 06:30:09 +0000 (15:30 +0900)]
ARM: shmobile: r8a7791 Koelsch DT reference DTS bits
Add DTS for the DT reference version of the Koelsch board support.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Tue, 8 Oct 2013 03:39:30 +0000 (12:39 +0900)]
ARM: shmobile: r8a7791 GPIO device tree node
Add GPIO controllers to the r8a7791 DTSI file.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Tue, 8 Oct 2013 03:39:01 +0000 (12:39 +0900)]
ARM: shmobile: r8a7791 PFC device tree node
Add a DT node for the r8a7791 PFC device.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Mon, 7 Oct 2013 04:26:58 +0000 (21:26 -0700)]
ARM: shmobile: lager: add MMCIF support on DTS
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Mon, 7 Oct 2013 04:26:40 +0000 (21:26 -0700)]
ARM: shmobile: lager: add default PFC settings on DTS
SCIF0/SCIF1 PFC setting is needed as default
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 4 Oct 2013 06:44:44 +0000 (23:44 -0700)]
ARM: shmobile: r8a7779: tidyup I2C driver name on DTSI
10e8d4f6dddb0f9dc408c2f2bde8399b243a42ca
(ARM: mach-shmobile: r8a7779: Minimal setup using DT)
added I2C driver, but it was SH-Mobile I2C.
R-Car H1 needs R-Car I2C driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 4 Oct 2013 06:44:15 +0000 (23:44 -0700)]
ARM: shmobile: r8a7778: add I2C support on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 26 Nov 2013 07:47:10 +0000 (16:47 +0900)] 
ARM: shmobile: r8a7779: add HSPI clock support for DT
Based on work for the r8a7778 SoC by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 4 Dec 2013 01:28:27 +0000 (17:28 -0800)]
ARM: shmobile: r8a7740: add FSI clock support for DT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Mon, 2 Dec 2013 02:17:18 +0000 (18:17 -0800)]
ARM: shmobile: r8a7790: add SSI MSTP clocks
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 21 Nov 2013 07:25:32 +0000 (23:25 -0800)]
ARM: shmobile: r8a7778: add HPBIFx DMAEngine support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 10 Dec 2013 07:43:16 +0000 (16:43 +0900)]
ARM: shmobile: Select AUTO_ZRELADDR for EMEV2
Since ("ARM: shmobile: Remove legacy KZM9D board code")
It is now necessary for AUTO_ZRELADDR to be selected
in order for the kernel to build with kzm9d_defconfig.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 19 Nov 2013 09:05:23 +0000 (01:05 -0800)]
ARM: shmobile: r8a7790: tidyup clock table order
SuperH lookups clock is using CLKDEV_CON/DEV/ICK_ID() macro
for a long term.
But in these days, the ICK clock is defined in random place.
This patch arranges it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 19 Nov 2013 09:04:35 +0000 (01:04 -0800)]
ARM: shmobile: r8a7790: fixup I2C clock source
I2C clock is based on P clock, not HP clock
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 19 Nov 2013 09:04:20 +0000 (01:04 -0800)]
ARM: shmobile: r8a7790: care EXTAL divider settings
EXTAL clock frequency needs 1/2 when
(MD14, MD13, MD19) = (1, x, x).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Nov 2013 08:00:05 +0000 (17:00 +0900)]
ARM: shmobile: Add r8a7791 clocks for thermal devices
Add the r8a7791 thermal device as legacy clocks.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Nov 2013 07:59:56 +0000 (16:59 +0900)]
ARM: shmobile: Add r8a7791 thermal platform device
Add a thermal platform device for the legacy case
on the r8a7791 SoC. This keeps the r8a7791 in sync
with the r8a7790 sister device.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Nov 2013 07:59:39 +0000 (16:59 +0900)]
ARM: shmobile: Add r8a7790 clocks for thermal devices
Add the r8a7790 DT thermal device to the legacy clocks.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sat, 9 Nov 2013 12:33:48 +0000 (13:33 +0100)]
ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY
SH-Mobile platforms are transitioning from non-multiplatform to
multiplatform kernel. A new ARCH_SHMOBILE_MULTI configuration symbol has
been created to group all multiplatform-enabled SH-Mobile SoCs. The
existing ARCH_SHMOBILE configuration symbol groups SoCs that haven't
been converted yet.
This arrangement works fine for the arch/ code, but lots of drivers
needed on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI depend on
ARCH_SHMOBILE only. In order to avoid changing them, rename
ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY, and create a new boolean
ARCH_SHMOBILE configuration symbol that is selected by both
ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 13 Nov 2013 13:01:42 +0000 (14:01 +0100)]
ARM: shmobile: r8a7791: Add DU and LVDS clocks
The ZX parent clock isn't implemented yet, add it as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 8 Nov 2013 10:09:34 +0000 (19:09 +0900)]
ARM: shmobile: Select USE_OF on EMEV2
Now when the legacy KZM9D board code is gone, make sure
USE_OF is selected in case of the EMEV2 SoC.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 1 Nov 2013 01:22:39 +0000 (18:22 -0700)]
ARM: shmobile: r8a7778: add HSPI clock support for DT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 6 Nov 2013 23:21:38 +0000 (08:21 +0900)]
ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code
Now when KZM9D legacy C board support code is
gone then remove emev2_add_standard_devices()
and all the platform devices from setup-emev2.c.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 6 Nov 2013 23:21:29 +0000 (08:21 +0900)]
ARM: shmobile: Remove legacy KZM9D board code
Remove the C and platform device version of KZM9D.
The DT version of KZM9D board support can now instead
directly be used with SoC specific code in setup-emev2.c.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 6 Nov 2013 23:21:20 +0000 (08:21 +0900)]
ARM: shmobile: Use ->init_late() in shared EMEV2 case
Hook up shmobile_init_late() to enable various
code such as suspend-to-RAM and CPUIdle.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 6 Nov 2013 23:21:11 +0000 (08:21 +0900)]
ARM: shmobile: Add shared EMEV2 code for ->init_machine()
Add a SoC specific function that initializes
clocks and starts DT probing in case of EMEV2.
This EMEV2 SoC support code may be built for
either legacy SHMOBILE or SMOBILE_MULTI.
The change allows us to support existing board
specific KZM9D DTB with these SoC specific
DT_MACHINE_START() callbacks.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 6 Nov 2013 10:43:32 +0000 (19:43 +0900)]
ARM: shmobile: Enable MTU2 on r7s72100
Add MTU2 as r7s72100 system timer.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hiep Cao Minh [Tue, 22 Oct 2013 02:21:11 +0000 (11:21 +0900)] 
ARM: shmobile: r8a7790: add QSPI support
Adds support for QSPI on the r8a7790.
Signed-off-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Valentine Barshak [Wed, 9 Oct 2013 22:14:46 +0000 (02:14 +0400)] 
ARM: shmobile: r8a7790: Add USBHS clock support
This adds USBHS clock support.
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 11 Oct 2013 06:36:10 +0000 (23:36 -0700)]
ARM: shmobile: r8a7779: add SDHI clock support for DT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 11 Oct 2013 06:35:17 +0000 (23:35 -0700)]
ARM: shmobile: r8a7778: add SDHI clock support for DT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 4 Oct 2013 01:32:10 +0000 (18:32 -0700)]
ARM: shmobile: r8a7778: add MMCIF clock support for DT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 9 Oct 2013 22:57:42 +0000 (07:57 +0900)]
ARM: shmobile: Select GPIO in case of the r7s72100 SoC
The r7s72100 contains GPIO controllers so make sure the GPIO
subsystem can be built by selecting ARCH_WANT_OPTIONAL_GPIOLIB.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 8 Oct 2013 05:59:23 +0000 (22:59 -0700)]
ARM: shmobile: r8a73a4: don't use named irq for DMAEngine
sh-dma-engine driver doesn't care irq name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Tue, 8 Oct 2013 03:39:39 +0000 (12:39 +0900)]
ARM: shmobile: r8a7791 GPIO platform device support
Add GPIO controller platform devices for the r8a7791 SoC.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Tue, 8 Oct 2013 03:39:20 +0000 (12:39 +0900)]
ARM: shmobile: Select GPIO in case of the r8a7791 SoC
Make it possible to build GPIO on r8a7791.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Tue, 8 Oct 2013 03:39:10 +0000 (12:39 +0900)]
ARM: shmobile: r8a7791 PFC platform device support
Add a platform device for the r8a7791 PFC device.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Tue, 8 Oct 2013 03:16:08 +0000 (12:16 +0900)]
ARM: shmobile: Select IRQC in case of the r8a7791 SoC
The r8a7791 contains IRQC hardware so make sure
the driver gets built by selecting RENESAS_IRQC.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 4 Oct 2013 06:45:03 +0000 (23:45 -0700)]
ARM: shmobile: r8a7779: add I2C clock for DT
10e8d4f6dddb0f9dc408c2f2bde8399b243a42ca
(ARM: mach-shmobile: r8a7779: Minimal setup using DT)
added I2C driver for DT, but it didn't add clock.
This patch adds missing clock for I2C
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 4 Oct 2013 06:43:54 +0000 (23:43 -0700)]
ARM: shmobile: r8a7778: add I2C clock for DT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Linus Torvalds [Fri, 22 Nov 2013 19:30:55 +0000 (11:30 -0800)] 
Linux 3.13-rc1
Linus Torvalds [Fri, 22 Nov 2013 18:58:14 +0000 (10:58 -0800)]
Merge tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git./linux/kernel/git/tyhicks/ecryptfs
Pull minor eCryptfs fix from Tyler Hicks:
"Quiet static checkers by removing unneeded conditionals"
* tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: file->private_data is always valid
Linus Torvalds [Fri, 22 Nov 2013 18:57:31 +0000 (10:57 -0800)]
Merge tag 'sound-fix2-3.13-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull second set of sound fixes from Takashi Iwai:
"A collection of small fixes in HD-audio quirks and runtime PM, ASoC
rcar, abs8500 and other codecs. Most of commits are for stable
kernels, too"
* tag 'sound-fix2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial)
ALSA: hda - Provide missing pin configs for VAIO with ALC260
ALSA: hda - Add headset quirk for Dell Inspiron 3135
ALSA: hda - Fix the headphone jack detection on Sony VAIO TX
ALSA: hda - Fix missing bass speaker on ASUS N550
ALSA: hda - Fix unbalanced runtime PM notification at resume
ASoC: arizona: Set FLL to free-run before disabling
ALSA: hda - A casual Dell Headset quirk
ASoC: rcar: fixup dma_async_issue_pending() timing
ASoC: rcar: off by one in rsnd_scu_set_route()
ASoC: wm5110: Add post SYSCLK register patch for rev D chip
ASoC: ab8500: Revert to using custom I/O functions
ALSA: hda - Also enable mute/micmute LED control for "Lenovo dock" fixup
ALSA: firewire-lib: include sound/asound.h to refer to snd_pcm_format_t
ALSA: hda - Select FW_LOADER from CONFIG_SND_HDA_CODEC_CA0132_DSP
ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Realtek codec
ASoC: rcar: fixup mod access before checking
Linus Torvalds [Fri, 22 Nov 2013 18:56:11 +0000 (10:56 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull DRM fixes from Dave Airlie:
"I was going to leave this until post -rc1 but sysfs fixes broke
hotplug in userspace, so I had to fix it harder, otherwise a set of
pulls from intel, radeon and vmware,
The vmware/ttm changes are bit larger but since its early and they are
unlikely to break anything else I put them in, it lets vmware work
with dri3"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits)
drm/sysfs: fix hotplug regression since lifetime changes
drm/exynos: g2d: fix memory leak to userptr
drm/i915: Fix gen3 self-refresh watermarks
drm/ttm: Remove set_need_resched from the ttm fault handler
drm/ttm: Don't move non-existing data
drm/radeon: hook up backlight functions for CI and KV family.
drm/i915: Replicate BIOS eDP bpp clamping hack for hsw
drm/i915: Do not enable package C8 on unsupported hardware
drm/i915: Hold pc8 lock around toggling pc8.gpu_idle
drm/i915: encoder->get_config is no longer optional
drm/i915/tv: add ->get_config callback
drm/radeon/cik: Add macrotile mode array query
drm/radeon/cik: Return backend map information to userspace
drm/vmwgfx: Make vmwgfx dma buffers prime aware
drm/vmwgfx: Make surfaces prime-aware
drm/vmwgfx: Hook up the prime ioctls
drm/ttm: Add a minimal prime implementation for ttm base objects
drm/vmwgfx: Fix false lockdep warning
drm/ttm: Allow execbuf util reserves without ticket
drm/i915: restore the early forcewake cleanup
...
This page took 0.041857 seconds and 5 git commands to generate.
projects / deliverable / linux.git / log
