Linus Torvalds [Tue, 16 Jun 2009 18:48:13 +0000 (11:48 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (33 commits)
[S390] s390: hibernation support for s390
[S390] pm: dcssblk power management callbacks.
[S390] pm: monreader power management callbacks.
[S390] pm: monwriter power management callbacks.
[S390] pm: memory hotplug power management callbacks
[S390] pm: con3270 power management callbacks.
[S390] pm: smsgiucv power management callbacks.
[S390] pm: hvc_iucv power management callbacks
[S390] PM: af_iucv power management callbacks.
[S390] pm: netiucv power management callbacks.
[S390] pm: iucv power management callbacks.
[S390] iucv: establish reboot notifier
[S390] pm: power management support for SCLP drivers.
[S390] pm: tape power management callbacks
[S390] pm: vmlogrdr power management callbacks
[S390] pm: vmur driver power management callbacks
[S390] pm: appldata power management callbacks
[S390] pm: vmwatchdog power management callbacks.
[S390] pm: zfcp driver power management callbacks
[S390] pm: claw driver power management callbacks
...
Linus Torvalds [Tue, 16 Jun 2009 18:46:45 +0000 (11:46 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: remove some includings of blktrace_api.h
mg_disk: seperate mg_disk.h again
block: Introduce helper to reset queue limits to default values
cfq: remove extraneous '\n' in blktrace output
ubifs: register backing_dev_info
btrfs: properly register fs backing device
block: don't overwrite bdi->state after bdi_init() has been run
cfq: cleanup for last_end_request in cfq_data
Linus Torvalds [Tue, 16 Jun 2009 18:30:37 +0000 (11:30 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (38 commits)
ps3flash: Always read chunks of 256 KiB, and cache them
ps3flash: Cache the last accessed FLASH chunk
ps3: Replace direct file operations by callback
ps3: Switch ps3_os_area_[gs]et_rtc_diff to EXPORT_SYMBOL_GPL()
ps3: Correct debug message in dma_ioc0_map_pages()
drivers/ps3: Add missing annotations
ps3fb: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
ps3flash: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
ps3: shorten ps3_system_bus_[gs]et_driver_data to ps3_system_bus_[gs]et_drvdata
ps3: Use dev_[gs]et_drvdata() instead of direct access for system bus devices
block/ps3: remove driver_data direct access of struct device
ps3vram: Make ps3vram_priv.reports a void *
ps3vram: Remove no longer used ps3vram_priv.ddr_base
ps3vram: Replace mutex by spinlock + bio_list
block: Add bio_list_peek()
powerpc: Use generic atomic64_t implementation on 32-bit processors
lib: Provide generic atomic64_t implementation
powerpc: Add compiler memory barrier to mtmsr macro
powerpc/iseries: Mark signal_vsp_instruction() as maybe unused
powerpc/iseries: Fix unused function warning in iSeries DT code
...
Linus Torvalds [Tue, 16 Jun 2009 18:30:16 +0000 (11:30 -0700)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: always update root items for fs trees at commit time
Linus Torvalds [Tue, 16 Jun 2009 18:29:44 +0000 (11:29 -0700)]
Merge git://git./linux/kernel/git/hirofumi/fatfs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
fat: split fat_generic_ioctl
FAT: add 'errors' mount option
Linus Torvalds [Tue, 16 Jun 2009 18:29:17 +0000 (11:29 -0700)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
therm_windtunnel: Convert to a new-style i2c driver
therm_adt746x: Convert to a new-style i2c driver
windfarm: Convert to new-style i2c drivers
therm_pm72: Convert to a new-style i2c driver
i2c-viapro: Add new PCI device ID for VX855
i2c/chips: Move max6875 to drivers/misc/eeprom
i2c: Do not give adapters a default parent
i2c: Do not probe for TV chips on Voodoo3 adapters
i2c: Retry automatically on arbitration loss
i2c: Remove void casts
Linus Torvalds [Tue, 16 Jun 2009 18:28:50 +0000 (11:28 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (max6650) Add support for alarms
hwmon: (f71882fg) Add support for the
F71858F
hwmon: (f71882fg) Add temp#_fault sysfs attr for f8000
hwmon: (f71882fg) Sanity check f8000 pwm settings
hwmon: (f71882fg) Cleanup f8000 pwm handling
hwmon: PCI quirk for hwmon access on MSI MS-7031 board
hwmon: (w83627ehf) Add W83627DHG-P support
hwmon: (tmp401) Add documentation
hwmon: (tmp401) Add support for TI's TMP411 sensors chip
hwmon: (tmp401) Add support for TI's TMP401 sensor chip
hwmon: (ibmaem) Automatically load on HC10 blade
hwmon: Fix more __devexit_p glitches
Linus Torvalds [Tue, 16 Jun 2009 18:24:23 +0000 (11:24 -0700)]
Merge branch 'acpica' of git://git./linux/kernel/git/lenb/linux-acpi-2.6
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits)
ACPICA: Update version to
20090521.
ACPICA: Disable preservation of SCI enable bit (SCI_EN)
ACPICA: Region deletion: Ensure region object is removed from handler list
ACPICA: Eliminate extra call to NsGetParentNode
ACPICA: Simplify internal operation region interface
ACPICA: Update Load() to use operation region interfaces
ACPICA: New: AcpiInstallMethod - install a single control method
ACPICA: Invalidate DdbHandle after table unload
ACPICA: Fix reference count issues for DdbHandle object
ACPICA: Simplify and optimize NsGetNextNode function
ACPICA: Additional validation of _PRT packages (resource mgr)
ACPICA: Fix DebugObject output for DdbHandle objects
ACPICA: Fix allowable release order for ASL mutex objects
ACPICA: Mutex support: Fix release ordering issue and current sync level
ACPICA: Update version to
20090422.
ACPICA: Linux OSL: cleanup/update/merge
ACPICA: Fix implementation of AML BreakPoint operator (break to debugger)
ACPICA: Fix miscellaneous warnings under gcc 4+
ACPICA: Miscellaneous lint changes
ACPICA: Fix possible dereference of null pointer
...
Alan Cox [Mon, 15 Jun 2009 15:28:29 +0000 (16:28 +0100)]
tty: Fix leaks introduced by the shift to separate ldisc objects
Gold star for the kmemleak detector.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 15 Jun 2009 15:27:29 +0000 (16:27 +0100)]
pty: Narrow the race on ldisc locking
The pty code has always been buggy on its ldisc handling. The recent
changes made the window for the race much bigger. Pending fixing it
properly which is not at all trivial, at least make the race small again so
we don't disrupt other dev work.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 16 Jun 2009 18:07:14 +0000 (11:07 -0700)]
printk: add KERN_DEFAULT loglevel to print_modules()
Several WARN_ON() messages omit the '\n' at the end of the string, which
is a simple (and understandable) error. The next line printed after
that warning line is usually the current module list, and that printk
does not have a log-level marker - resulting in one long mixed-up line.
Adding this loglevel marker will now avoid this unreadable mess.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 16 Jun 2009 18:02:28 +0000 (11:02 -0700)]
printk: Add KERN_DEFAULT printk log-level
This adds a KERN_DEFAULT loglevel marker, for when you cannot decide
which loglevel you want, and just want to keep an existing printk
with the default loglevel.
The difference between having KERN_DEFAULT and having no log-level
marker at all is two-fold:
- having the log-level marker will now force a new-line if the
previous printout had not added one (perhaps because it forgot,
but perhaps because it expected a continuation)
- having a log-level marker is required if you are printing out a
message that otherwise itself could perhaps otherwise be mistaken
for a log-level.
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 16 Jun 2009 17:57:02 +0000 (10:57 -0700)]
printk: clean up handling of log-levels and newlines
It used to be that we would only look at the log-level in a printk()
after explicit newlines, which can cause annoying problems when the
previous printk() did not end with a '\n'. In that case, the log-level
marker would be just printed out in the middle of the line, and be
seen as just noise rather than change the logging level.
This changes things to always look at the log-level in the first
bytes of the printout. If a log level marker is found, it is always
used as the log-level. Additionally, if no newline existed, one is
added (unless the log-level is the explicit KERN_CONT marker, to
explicitly show that it's a continuation of a previous line).
Acked-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Tue, 16 Jun 2009 09:19:36 +0000 (11:19 +0200)]
block: remove some includings of blktrace_api.h
When porting blktrace to tracepoints, we changed to trace/block.h
for trace prober declarations.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Hans-Joachim Picht [Tue, 16 Jun 2009 08:30:52 +0000 (10:30 +0200)]
[S390] s390: hibernation support for s390
This patch introduces the hibernation backend support to the
s390 architecture. Now it is possible to suspend a mainframe Linux
guest using the following command:
echo disk > /sys/power/state
Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Gerald Schaefer [Tue, 16 Jun 2009 08:30:51 +0000 (10:30 +0200)]
[S390] pm: dcssblk power management callbacks.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Gerald Schaefer [Tue, 16 Jun 2009 08:30:50 +0000 (10:30 +0200)]
[S390] pm: monreader power management callbacks.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Gerald Schaefer [Tue, 16 Jun 2009 08:30:49 +0000 (10:30 +0200)]
[S390] pm: monwriter power management callbacks.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Gerald Schaefer [Tue, 16 Jun 2009 08:30:48 +0000 (10:30 +0200)]
[S390] pm: memory hotplug power management callbacks
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Tue, 16 Jun 2009 08:30:47 +0000 (10:30 +0200)]
[S390] pm: con3270 power management callbacks.
Introduce the power management callbacks to the 3270 driver. On suspend
the current 3270 view is deactivated and for non-console 3270 device
the release callback is done. This disconnects the current tty /
fullscreen application from the 3270 device. On resume the current
view is reactivated, on the tty you get a fresh login.
If the system panics before the 3270 device has been resumed, the ccw
device for the 3270 console is reactivated with ccw_device_force_console.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Tue, 16 Jun 2009 08:30:46 +0000 (10:30 +0200)]
[S390] pm: smsgiucv power management callbacks.
Create dummy iucv-device to get control when the system is suspended
and resumed. Server the smsg iucv path on suspend, reestablish the
path on resume.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Hendrik Brueckner [Tue, 16 Jun 2009 08:30:45 +0000 (10:30 +0200)]
[S390] pm: hvc_iucv power management callbacks
The patch adds supporting for suspending and resuming IUCV HVC terminal
devices from disk. The obligatory Linux device driver interfaces has
been added by registering a device driver on the IUCV bus.
For each IUCV HVC terminal device the driver creates a respective device
on the IUCV bus.
To support suspend and resume, the PM freeze callback severs any established
IUCV communication path and triggers a HVC tty hang-up when the system image
is restored.
IUCV communication path are no longer valid when the z/VM guest is halted.
The device driver initialization has been updated to register devices and
the a new routine has been extracted to facilitate the hang-up of IUCV HVC
terminal devices.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ursula Braun [Tue, 16 Jun 2009 08:30:44 +0000 (10:30 +0200)]
[S390] PM: af_iucv power management callbacks.
Patch establishes a dummy afiucv-device to make sure af_iucv is
notified as iucv-bus device about suspend/resume.
The PM freeze callback severs all iucv pathes of connected af_iucv sockets.
The PM thaw/restore callback switches the state of all previously connected
sockets to IUCV_DISCONN.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ursula Braun [Tue, 16 Jun 2009 08:30:43 +0000 (10:30 +0200)]
[S390] pm: netiucv power management callbacks.
Patch establishes a dummy netiucv device to make sure iucv is notified
about suspend/resume even if netiucv is the only loaded iucv-exploting
module without any real net_device defined.
The PM freeze callback closes all open netiucv connections. Thus the
corresponding iucv path is removed.
The PM thaw/restore callback re-opens previously closed netiucv
connections.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ursula Braun [Tue, 16 Jun 2009 08:30:42 +0000 (10:30 +0200)]
[S390] pm: iucv power management callbacks.
Patch calls the PM callback functions of iucv-bus devices, which are
responsible for removal of their established iucv pathes.
The PM freeze callback for the first iucv-bus device disables all iucv
interrupts except the connection severed interrupt.
The PM freeze callback for the last iucv-bus device shuts down iucv.
The PM thaw callback for the first iucv-bus device re-enables iucv
if it has been shut down during freeze. If freezing has been interrupted,
it re-enables iucv interrupts according to the needs of iucv-exploiters.
The PM restore callback for the first iucv-bus device re-enables iucv.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ursula Braun [Tue, 16 Jun 2009 08:30:41 +0000 (10:30 +0200)]
[S390] iucv: establish reboot notifier
To guarantee a proper cleanup, patch adds a reboot notifier to
the iucv base code, which disables iucv interrupts, shuts down
established iucv pathes, and removes iucv declarations for z/VM.
Checks have to be added to the iucv-API functions, whether
iucv-buffers removed at reboot time are still declared.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Michael Holzheu [Tue, 16 Jun 2009 08:30:40 +0000 (10:30 +0200)]
[S390] pm: power management support for SCLP drivers.
The SCLP base driver defines a new notifier call back for all upper level SCLP
drivers, like the SCLP console, etc. This guarantees that in suspend first the
upper level drivers are suspended and afterwards the SCLP base driver. For
resume it is the other way round. The SCLP base driver itself registers a
new platform device at the platform bus and gets PM notifications via
the dev_pm_ops.
In suspend, the SCLP base driver switches off the receiver and sender mask
This is done in sclp_deactivate(). After suspend all new requests will be
rejected with -EIO and no more interrupts will be received, because the masks
are switched off. For resume the sender and receiver masks are reset in
the sclp_reactivate() function.
When the SCLP console is suspended, all new messages are cached in the
sclp console buffers. In resume, all the cached messages are written to the
console. In addition to that we have an early resume function that removes
the cached messages from the suspend image.
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Frank Munzert [Tue, 16 Jun 2009 08:30:39 +0000 (10:30 +0200)]
[S390] pm: tape power management callbacks
Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Weinhuber [Tue, 16 Jun 2009 08:30:38 +0000 (10:30 +0200)]
[S390] pm: vmlogrdr power management callbacks
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Frank Munzert [Tue, 16 Jun 2009 08:30:37 +0000 (10:30 +0200)]
[S390] pm: vmur driver power management callbacks
Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Gerald Schaefer [Tue, 16 Jun 2009 08:30:36 +0000 (10:30 +0200)]
[S390] pm: appldata power management callbacks
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Christian Borntraeger [Tue, 16 Jun 2009 08:30:35 +0000 (10:30 +0200)]
[S390] pm: vmwatchdog power management callbacks.
This patch implements suspend/hibernation for the vmwatchdog driver. The
pm_notifier_callchain is used to get control on PM events. Since watchdog
operation and suspend cannot work together in a reliable fashion, the open
flag is also used to prevent suspend and open from happening at the same
time.
The watchdog can also be active with no open file descriptor. This patch
adds another flag which is only changed in vmwdt_keep_alive and
vmwdt_disable.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Petermann [Tue, 16 Jun 2009 08:30:34 +0000 (10:30 +0200)]
[S390] pm: zfcp driver power management callbacks
Signed-off-by: Martin Petermann <martin.petermann@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Frank Blaschka [Tue, 16 Jun 2009 08:30:33 +0000 (10:30 +0200)]
[S390] pm: claw driver power management callbacks
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Frank Blaschka [Tue, 16 Jun 2009 08:30:32 +0000 (10:30 +0200)]
[S390] pm: ctcm driver power management callbacks
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Frank Blaschka [Tue, 16 Jun 2009 08:30:31 +0000 (10:30 +0200)]
[S390] pm: qeth driver power management callbacks
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Klaus-Dieter Wacket [Tue, 16 Jun 2009 08:30:30 +0000 (10:30 +0200)]
[S390] pm: lcs driver power management callbacks
Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Tue, 16 Jun 2009 08:30:29 +0000 (10:30 +0200)]
[S390] pm: con3215 power management callbacks
Introduce the power management callbacks to the 3215 console. On suspend
the console buffer is flushed to the 3215 device to have an empty console
buffer. Printks done while the 3215 device is suspended are buffered in
the 64K buffer of the 3215 device. If the buffer is full new messages will
push out the oldest messages to make room for the most recent message.
On resume the buffered messages are printed. If the system panics before
the 3215 device is resumed ccw_device_force_console is used to get the
console working again.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Tue, 16 Jun 2009 08:30:28 +0000 (10:30 +0200)]
[S390] cio: force console function
If something goes wrong in a suspend / resume cycle a ccw based console
if very likely in the suspended state and cannot print anything.
Introduce ccw_device_force_console to force the wake up of the console
device to be able to print the oops message. The console device drivers
should use this function only if the system paniced.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Michael Holzheu [Tue, 16 Jun 2009 08:30:27 +0000 (10:30 +0200)]
[S390] pm: xpram driver power management callbacks
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Hans-Joachim Picht [Tue, 16 Jun 2009 08:30:26 +0000 (10:30 +0200)]
[S390] pm: add kernel_page_present
Fix the following build failure caused by make allyesconfig using
CONFIG_HIBERNATION and CONFIG_DEBUG_PAGEALLOC
kernel/built-in.o: In function `saveable_page':
kernel/power/snapshot.c:897: undefined reference to `kernel_page_present'
kernel/built-in.o: In function `safe_copy_page':
kernel/power/snapshot.c:948: undefined reference to `kernel_page_present'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Haberland [Tue, 16 Jun 2009 08:30:25 +0000 (10:30 +0200)]
[S390] pm: dasd power management callbacks.
Introduce the power management callbacks to the dasd driver. On suspend
the dasd devices are stopped and removed from the focus of alias
management.
On resume they are reinitialized by rereading the device characteristics
and adding the device to the alias management.
In case the device has gone away during suspend it will caught in the
suspend state with stopped flag set to UNRESUMED. After it appears again
the restore function is called again.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cornelia Huck [Tue, 16 Jun 2009 08:30:24 +0000 (10:30 +0200)]
[S390] pm: chsc subchannel driver power management callbacks
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cornelia Huck [Tue, 16 Jun 2009 08:30:23 +0000 (10:30 +0200)]
[S390] pm: io subchannel driver power management callbacks
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Tue, 16 Jun 2009 08:30:22 +0000 (10:30 +0200)]
[S390] pm: css bus power management callbacks
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Tue, 16 Jun 2009 08:30:21 +0000 (10:30 +0200)]
[S390] pm: ccwgroup bus power management callbacks
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Tue, 16 Jun 2009 08:30:20 +0000 (10:30 +0200)]
[S390] pm: ccw bus power management callbacks
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
unsik Kim [Tue, 16 Jun 2009 06:40:20 +0000 (08:40 +0200)]
mg_disk: seperate mg_disk.h again
eec9462088a26c046d4db3100796a340a50890b8 fold mg_disk.h into mg_disk.c,
but mg_disk platform driver needs private data for operation. This also
make mg_disk.c as machine independent. Seperate only needed structure and
defines to mg_disk.h
Signed-off-by: unsik Kim <donari75@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Martin K. Petersen [Tue, 16 Jun 2009 06:23:52 +0000 (08:23 +0200)]
block: Introduce helper to reset queue limits to default values
DM reuses the request queue when swapping in a new device table
Introduce blk_set_default_limits() which can be used to reset the the
queue_limits prior to stacking devices.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jeff Moyer [Fri, 12 Jun 2009 13:29:30 +0000 (15:29 +0200)]
cfq: remove extraneous '\n' in blktrace output
I noticed a blank line in blktrace output. This patch fixes that.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Fri, 29 May 2009 07:19:23 +0000 (09:19 +0200)]
ubifs: register backing_dev_info
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Fri, 12 Jun 2009 12:43:40 +0000 (14:43 +0200)]
btrfs: properly register fs backing device
btrfs assigns this bdi to all inodes on that file system, so make
sure it's registered. This isn't really important now, but will be
when we put dirty inodes there. Even now, we miss the stats when the
bdi isn't visible.
Also fixes failure to check bdi_init() return value, and bad inherit of
->capabilities flags from the default bdi.
Acked-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Fri, 12 Jun 2009 12:42:56 +0000 (14:42 +0200)]
block: don't overwrite bdi->state after bdi_init() has been run
Move the defaults to where we do the init of the backing_dev_info.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Gui Jianfeng [Fri, 12 Jun 2009 13:27:50 +0000 (15:27 +0200)]
cfq: cleanup for last_end_request in cfq_data
Actually, last_end_request in cfq_data isn't used now. So lets
just remove it.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Yan Zheng [Tue, 16 Jun 2009 00:01:02 +0000 (20:01 -0400)]
Btrfs: always update root items for fs trees at commit time
commit_fs_roots skips updating root items for fs trees that aren't modified.
This is unsafe now that relocation code modifies root item's last_snapshot
field without modifying corresponding fs tree.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Linus Torvalds [Mon, 15 Jun 2009 17:38:06 +0000 (10:38 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] fix compile error in arch/ia64/mm/extable.c
Linus Torvalds [Mon, 15 Jun 2009 17:06:19 +0000 (10:06 -0700)]
Merge branch 'timers-for-linus-migration' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: Logic to move non pinned timers
timers: /proc/sys sysctl hook to enable timer migration
timers: Identifying the existing pinned timers
timers: Framework for identifying pinned timers
timers: allow deferrable timers for intervals tv2-tv5 to be deferred
Fix up conflicts in kernel/sched.c and kernel/timer.c manually
Linus Torvalds [Mon, 15 Jun 2009 16:58:50 +0000 (09:58 -0700)]
Merge branch 'timers-for-linus-clockevents' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-clockevents' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clockevent: export register_device and delta2ns
clockevents: tick_broadcast_device can become static
Linus Torvalds [Mon, 15 Jun 2009 16:58:33 +0000 (09:58 -0700)]
Merge branch 'timers-for-linus-clocksource' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-clocksource' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clocksource: prevent selection of low resolution clocksourse also for nohz=on
clocksource: sanity check sysfs clocksource changes
Linus Torvalds [Mon, 15 Jun 2009 16:43:24 +0000 (09:43 -0700)]
Merge branch 'timers-for-linus-ntp' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-ntp' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ntp: fix comment typos
ntp: adjust SHIFT_PLL to improve NTP convergence
Linus Torvalds [Mon, 15 Jun 2009 16:40:05 +0000 (09:40 -0700)]
Merge git://git./linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1244 commits)
pkt_sched: Rename PSCHED_US2NS and PSCHED_NS2US
ipv4: Fix fib_trie rebalancing
Bluetooth: Fix issue with uninitialized nsh.type in DTL-1 driver
Bluetooth: Fix Kconfig issue with RFKILL integration
PIM-SM: namespace changes
ipv4: update ARPD help text
net: use a deferred timer in rt_check_expire
ieee802154: fix kconfig bool/tristate muckup
bonding: initialization rework
bonding: use is_zero_ether_addr
bonding: network device names are case sensative
bonding: elminate bad refcount code
bonding: fix style issues
bonding: fix destructor
bonding: remove bonding read/write semaphore
bonding: initialize before registration
bonding: bond_create always called with default parameters
x_tables: Convert printk to pr_err
netfilter: conntrack: optional reliable conntrack event delivery
list_nulls: add hlist_nulls_add_head and hlist_nulls_del
...
Christian Engelmayer [Mon, 15 Jun 2009 16:39:52 +0000 (18:39 +0200)]
hwmon: (max6650) Add support for alarms
Export the alarm flags provided by the MAX6650/MAX6651 fan-speed regulator
and monitor chips via sysfs.
Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Hans de Goede [Mon, 15 Jun 2009 16:39:52 +0000 (18:39 +0200)]
hwmon: (f71882fg) Add support for the
F71858F
Add support for the hwmon part of the Fintek F71858FG superio IC to the
f71882fg driver. Many thanks to Jelle de Jong for lending me a motherboard
with this superio on it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Hans de Goede [Mon, 15 Jun 2009 16:39:51 +0000 (18:39 +0200)]
hwmon: (f71882fg) Add temp#_fault sysfs attr for f8000
While working on f71852fg support I noticed that the f8000 sysfs attr
table was missing entries for temp#_fault, which the f8000 does have and
which we were already reading.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Hans de Goede [Mon, 15 Jun 2009 16:39:51 +0000 (18:39 +0200)]
hwmon: (f71882fg) Sanity check f8000 pwm settings
We depend up on the pwm_enable register (0x96) not containing any reserved
settings in various places. We were already checking to make sure there
were no reserved settings in the register for the f71862fg, this patch adds
the same checking for the f8000, while at it it also moves the code to
a more apropriate place so we don't need to check if the fan/pwm part
of the IC is enabled twice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Hans de Goede [Mon, 15 Jun 2009 16:39:50 +0000 (18:39 +0200)]
hwmon: (f71882fg) Cleanup f8000 pwm handling
Currently we are using separate per model sysfs attr for the 3th pwm, because
the 3th pwm of the f8000 only has automatic mode and not manual mode. Doing
things this way was getting in the way for adding f71858fg support, so this
patch makes the pwm attr identical for all models, and instead adds a check
to store_pwm_enable() disallowing setting the 3th pwm to manual mode
on a f8000 IC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 15 Jun 2009 16:39:50 +0000 (18:39 +0200)]
hwmon: PCI quirk for hwmon access on MSI MS-7031 board
The MSI MS-7031 is based on an ATI IXP300 south bridge. On this south
bridge, accessible I/O ports must be enabled explicitly. Unfortunately
the BIOS forgets to enable access to the hardware monitoring chip I/O
ports, so hardware monitoring fails.
Add a quirk enabling access to the required ports (0x295-0x296). This
is exactly what MSI's own hardware monitoring application is doing, so
it has to be the right way.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 15 Jun 2009 16:39:50 +0000 (18:39 +0200)]
hwmon: (w83627ehf) Add W83627DHG-P support
Add support for the new incarnation of the Winbond/Nuvoton W83627DHG
chip known as W83627DHG-P. It is basically the same as the original
W83627DHG with an additional automatic can speed control mode (not
supported by the driver yet.)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Madhu <madhu.chinakonda@gmail.com>
Andre Prendel [Mon, 15 Jun 2009 16:39:49 +0000 (18:39 +0200)]
hwmon: (tmp401) Add documentation
Documentation for the tmp401 driver.
The documentation describes the tmp401 driver and the supported Texas
Instruments TMP401 and TMP411 temperature sensor chips.
Further documentation for new sysfs attributes supported by this
driver is added to Documentation/hwmon/sysfs-interface.
Signed-off-by: Andre Prendel <andre.prendel@gmx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Andre Prendel [Mon, 15 Jun 2009 16:39:47 +0000 (18:39 +0200)]
hwmon: (tmp401) Add support for TI's TMP411 sensors chip
This adds support for TI's TMP411 sensor chip.
Preliminary support were done by Gabriel Konat, Sander Leget and
Wouter Willems. The chip is compatible with TI's TMP401 sensor
chip. It has additional support for historical minimun/maximum
measurements.
Signed-off-by: Andre Prendel <andre.prendel@gmx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Hans de Goede [Mon, 15 Jun 2009 16:39:46 +0000 (18:39 +0200)]
hwmon: (tmp401) Add support for TI's TMP401 sensor chip
This is a new hwmon driver for TI's TMP401 temperature sensor IC. This driver
was written on behalf of an embedded systems vendor under the
Linux driver project.
It has been tested using a TI TMP401 sample attached to a i2c-tiny-usb adapter.
Which was provided by Till Harbaum, many thanks to him for this!
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Darrick J. Wong [Mon, 15 Jun 2009 16:39:46 +0000 (18:39 +0200)]
hwmon: (ibmaem) Automatically load on HC10 blade
Enable auto-probing for the HC10 blade and amend the supported system
list.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 15 Jun 2009 16:39:45 +0000 (18:39 +0200)]
hwmon: Fix more __devexit_p glitches
Make sure __devexit and devexit_p() match in all hwmon drivers.
Suggested by a similar fix from Mike Frysinger.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Linus Torvalds [Mon, 15 Jun 2009 16:32:52 +0000 (09:32 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (103 commits)
powerpc: Fix bug in move of altivec code to vector.S
powerpc: Add support for swiotlb on 32-bit
powerpc/spufs: Remove unused error path
powerpc: Fix warning when printing a resource_size_t
powerpc/xmon: Remove unused variable in xmon.c
powerpc/pseries: Fix warnings when printing resource_size_t
powerpc: Shield code specific to 64-bit server processors
powerpc: Separate PACA fields for server CPUs
powerpc: Split exception handling out of head_64.S
powerpc: Introduce CONFIG_PPC_BOOK3S
powerpc: Move VMX and VSX asm code to vector.S
powerpc: Set init_bootmem_done on NUMA platforms as well
powerpc/mm: Fix a AB->BA deadlock scenario with nohash MMU context lock
powerpc/mm: Fix some SMP issues with MMU context handling
powerpc: Add PTRACE_SINGLEBLOCK support
fbdev: Add PLB support and cleanup DCR in xilinxfb driver.
powerpc/virtex: Add ml510 reference design device tree
powerpc/virtex: Add Xilinx ML510 reference design support
powerpc/virtex: refactor intc driver and add support for i8259 cascading
powerpc/virtex: Add support for Xilinx PCI host bridge
...
Linus Torvalds [Mon, 15 Jun 2009 16:27:37 +0000 (09:27 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator/max1586: fix V3 gain calculation integer overflow
regulator/max1586: support increased V3 voltage range
regulator: lp3971 - fix driver link error when built-in.
LP3971 PMIC regulator driver (updated and combined version)
regulator: remove driver_data direct access of struct device
regulator: Set MODULE_ALIAS for regulator drivers
regulator: Support list_voltage for fixed voltage regulator
regulator: Move regulator drivers to subsys_initcall()
regulator: build fix for powerpc - renamed show_state
regulator: add userspace-consumer driver
Maxim 1586 regulator driver
Rusty Russell [Sat, 13 Jun 2009 05:20:15 +0000 (14:50 +0930)]
[IA64] fix compile error in arch/ia64/mm/extable.c
ad6561dffa17f17bb68d7207d422c26c381c4313 ("module: trim exception table on init
free.") put a bogus trim_init_extable() function into ia64 which didn't compile.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Linus Torvalds [Mon, 15 Jun 2009 16:13:49 +0000 (09:13 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (22 commits)
nilfs2: support contiguous lookup of blocks
nilfs2: add sync_page method to page caches of meta data
nilfs2: use device's backing_dev_info for btree node caches
nilfs2: return EBUSY against delete request on snapshot
nilfs2: modify list of unsupported features in caveats
nilfs2: enable sync_page method
nilfs2: set bio unplug flag for the last bio in segment
nilfs2: allow future expansion of metadata read out via get info ioctl
NILFS2: Pagecache usage optimization on NILFS2
nilfs2: remove nilfs_btree_operations from btree mapping
nilfs2: remove nilfs_direct_operations from direct mapping
nilfs2: remove bmap pointer operations
nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct
nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function
nilfs2: move get block functions in bmap.c into btree codes
nilfs2: remove nilfs_bmap_delete_block
nilfs2: remove nilfs_bmap_put_block
nilfs2: remove header file for segment list operations
nilfs2: eliminate removal list of segments
nilfs2: add sufile function that can modify multiple segment usages
...
Jean Delvare [Mon, 15 Jun 2009 16:01:52 +0000 (18:01 +0200)]
therm_windtunnel: Convert to a new-style i2c driver
The legacy i2c binding model is going away soon, so convert the ppc
therm_windtunnel driver to the new model or it will break.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Jean Delvare [Mon, 15 Jun 2009 16:01:51 +0000 (18:01 +0200)]
therm_adt746x: Convert to a new-style i2c driver
The legacy i2c binding model is going away soon, so convert the ppc
therm_adt746x driver to the new model or it will break.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Jean Delvare [Mon, 15 Jun 2009 16:01:51 +0000 (18:01 +0200)]
windfarm: Convert to new-style i2c drivers
The legacy i2c binding model is going away soon, so convert the
macintosh windfarm drivers to the new model or they will break.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Jean Delvare [Mon, 15 Jun 2009 16:01:50 +0000 (18:01 +0200)]
therm_pm72: Convert to a new-style i2c driver
The legacy i2c binding model is going away soon, so convert the
macintosh therm_pm72 driver to the new model or it will break.
This is really a quick and dirty conversion, that should do the trick
for now, but no doubt that something cleaner can be done if anyone is
interested.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Paul Mackerras <paulus@samba.org>
Harald Welte [Mon, 15 Jun 2009 16:01:49 +0000 (18:01 +0200)]
i2c-viapro: Add new PCI device ID for VX855
The south bridge of the VIA VX855 chipset has a different PCI Device ID
so i2c-viapro.c needs to be updated with this.
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Wolfram Sang [Mon, 15 Jun 2009 16:01:49 +0000 (18:01 +0200)]
i2c/chips: Move max6875 to drivers/misc/eeprom
This driver only reads the user EEPROM of that chip, so we can move it
to the eeprom-directory in order to further clean up (and later remove)
drivers/i2c/chips.
The Kconfig text was updated to match the current functionality,
dropping the meanwhile obsoleted parts.
Defconfigs have been adapted.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Ben Gardner <gardner.ben@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 15 Jun 2009 16:01:48 +0000 (18:01 +0200)]
i2c: Do not give adapters a default parent
We don't need to give adapters a parent if they don't have one. The
driver core will put them in the virtual device directory and all will
be fine.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 15 Jun 2009 16:01:48 +0000 (18:01 +0200)]
i2c: Do not probe for TV chips on Voodoo3 adapters
There's no point in giving the I2C bus of Voodoo3 adapters a class
value, there's no video chip driver checking for it anymore. If
support is ever needed, the video device should be instantiated
explicitly rather than probed.
To the best of my knowledge the only video chip that can be found on
these boards is a BT869 video encoder, for which no support exists
currently.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Clifford Wolf [Mon, 15 Jun 2009 16:01:46 +0000 (18:01 +0200)]
i2c: Retry automatically on arbitration loss
Some small changes in i2c core to retry i2c xfers until either the
maximum number of retries or the timeout is hit.
Signed-off-by: Clifford Wolf <clifford@clifford.at>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jack Stone [Mon, 15 Jun 2009 16:01:46 +0000 (18:01 +0200)]
i2c: Remove void casts
Remove uneeded void casts.
Signed-off-by: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Philipp Zabel [Thu, 28 May 2009 19:00:03 +0000 (21:00 +0200)]
regulator/max1586: fix V3 gain calculation integer overflow
On Thu, May 28, 2009 at 10:59 AM, Mark Brown <broonie@opensource.wolfsonmicro.com> wrote:
> On Thu, May 28, 2009 at 07:15:16AM +0200, Philipp Zabel wrote:
>> The V3 regulator can be configured with an external resistor
>> connected to the feedback pin (R24 in the data sheet) to
>> increase the voltage range.
>>
>> For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum
>> V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency.
>>
>> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
>
> Looks good.
>
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Thanks, but it turns out I hit a 32 bit integer overflow in
the gain calculation. I'd like to mend that with the following
patch. Now max_uV could be increased up to 4.294 V, enough to
charge LiPo cells.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Philipp Zabel [Thu, 28 May 2009 05:15:16 +0000 (07:15 +0200)]
regulator/max1586: support increased V3 voltage range
The V3 regulator can be configured with an external resistor
connected to the feedback pin (R24 in the data sheet) to
increase the voltage range.
For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum
V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Liam Girdwood [Tue, 19 May 2009 10:44:37 +0000 (11:44 +0100)]
regulator: lp3971 - fix driver link error when built-in.
lp3971_i2c_remove' referenced in section `.data' of drivers/built-in.o:
defined in discarded section `.devexit.text' of drivers/built-in.o
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Marek Szyprowski [Tue, 19 May 2009 05:33:55 +0000 (07:33 +0200)]
LP3971 PMIC regulator driver (updated and combined version)
This patch adds regulator drivers for National Semiconductors LP3971 PMIC.
This LP3971 PMIC controller has 3 DC/DC voltage converters and 5 low
drop-out (LDO) regulators. LP3971 PMIC controller uses I2C interface.
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Greg Kroah-Hartman [Thu, 30 Apr 2009 22:21:37 +0000 (15:21 -0700)]
regulator: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device. Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used. These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Tue, 28 Apr 2009 10:13:55 +0000 (11:13 +0100)]
regulator: Set MODULE_ALIAS for regulator drivers
Several of the regulator drivers didn't have MODULE_ALIAS so couldn't be
auto loaded. Add the MODULE_ALIAS in case they do get built as modules.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Tue, 28 Apr 2009 10:13:54 +0000 (11:13 +0100)]
regulator: Support list_voltage for fixed voltage regulator
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Mon, 27 Apr 2009 17:21:18 +0000 (18:21 +0100)]
regulator: Move regulator drivers to subsys_initcall()
Regulators need to be available early in init in order to allow them
to be available for consumers when requested. This is generally done
by registering them at subsys_initcall() time but not all regulator
drivers have done that. Convert these drivers to do so in order to
mimimise future support.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Liam Girdwood [Tue, 28 Apr 2009 11:01:16 +0000 (12:01 +0100)]
regulator: build fix for powerpc - renamed show_state
This patch fixes the follwing build failure on powerpc:-
> Today's linux-next build (powerpc allyesconfig) failed like this:
>
> drivers/regulator/userspace-consumer.c:43: error: conflicting types
> for 'show_state'
> include/linux/sched.h:273: note: previous definition of 'show_state'
> was here
>
> Caused by commit
5defa2bce704ca4151cfe24e4297aa7797cafd22 ("regulator:
> add userspace-consumer driver") which I have reverted for today.
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mike Rapoport [Sun, 26 Apr 2009 13:49:39 +0000 (16:49 +0300)]
regulator: add userspace-consumer driver
The userspace-consumer driver allows control of voltage and current
regulator state from userspace. This is required for fine-grained
power management of devices that are completely controller by userspace
applications, e.g. a GPS transciever connected to a serial port.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Robert Jarzmik [Thu, 23 Apr 2009 18:10:43 +0000 (20:10 +0200)]
Maxim 1586 regulator driver
The Maxim 1586 regulator is a voltage regulator with 2
voltage outputs, specially suitable for Marvell PXA
chips. One output is in the range of required VCC_CORE by
the PXA27x chips, the other in the VCC_USIM required as well
by PXA27x chips.
The chip is controlled through the I2C bus.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
David S. Miller [Mon, 15 Jun 2009 10:02:23 +0000 (03:02 -0700)]
Merge branch 'master' of /linux/kernel/git/torvalds/linux-2.6
Conflicts:
Documentation/feature-removal-schedule.txt
drivers/scsi/fcoe/fcoe.c
net/core/drop_monitor.c
net/core/net-traces.c
Jarek Poplawski [Mon, 15 Jun 2009 09:31:47 +0000 (02:31 -0700)]
pkt_sched: Rename PSCHED_US2NS and PSCHED_NS2US
Let's use TICKS instead of US, so PSCHED_TICKS2NS and PSCHED_NS2TICKS
(like in PSCHED_TICKS_PER_SEC already) to avoid misleading.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This page took 0.04617 seconds and 5 git commands to generate.