Jesper Nilsson [Mon, 28 Jan 2008 16:56:56 +0000 (17:56 +0100)]
CRIS v32: Add support for ETRAX FS and ARTPEC-3 for arch-v32/hwregs/eth_defs.h
- A couple of fields have changed name:
reg_eth_rw_ga_lo.table -> tbl
reg_eth_rw_ga_hi.table -> tbl
reg_eth_rw_gen_ctrl.flow_ctrl_dis -> flow_ctrl
- Add some new register fields.
reg_eth_rw_gen_ctrl.gtxclk_out
reg_eth_rw_gen_ctrl.phyrst_n
reg_eth_rw_tr_ctrl.carrier_ext
- max_size in reg_eth_rw_rec_ctrl had the wrong size.
- Registers reg_eth_rw_mgm_ctrl and reg_eth_r_stat was reworked completely.
Jesper Nilsson [Mon, 28 Jan 2008 16:42:17 +0000 (17:42 +0100)]
CRIS v32: Rename variable used in macro for arch-v32/hwregs/dma.h
The old name "r" would quite often produce warnings when other
variables with the same name was shadowed. Rename it __x to
make it more unlikely to happen.
Jesper Nilsson [Mon, 28 Jan 2008 15:55:21 +0000 (16:55 +0100)]
CRIS v32: Remove useless CVS id tag from arch-v32/hwregs/Makefile
Jesper Nilsson [Mon, 28 Jan 2008 15:54:51 +0000 (16:54 +0100)]
CRIS v32: Add defines for udelay and ndelay in arch-v32/delay.h
Both of these are implemented using cris_delay10ns().
Jesper Nilsson [Mon, 28 Jan 2008 15:53:19 +0000 (16:53 +0100)]
CRIS v32: Adjust arch-v32/atomic.h for new spinlock/rwlock infrastructure
Jesper Nilsson [Mon, 28 Jan 2008 15:51:31 +0000 (16:51 +0100)]
CRIS v32: Add missing header to include/asm-cris/arch-v32/Kbuild
Jesper Nilsson [Mon, 28 Jan 2008 15:50:32 +0000 (16:50 +0100)]
CRIS: Break long comment line in include/asm-cris/arch-v10/page.h
Jesper Nilsson [Mon, 28 Jan 2008 15:49:39 +0000 (16:49 +0100)]
CRIS: Rename LED macros to CRIS_LED to avoid name clash in io.h
This is done to avoid collision with linux/leds.h
Jesper Nilsson [Thu, 31 Jan 2008 16:40:37 +0000 (17:40 +0100)]
CRIS: Add missing headers to include/asm-cris Kbuild files.
Jesper Nilsson [Mon, 28 Jan 2008 15:40:21 +0000 (16:40 +0100)]
CRIS: Add sched_clock to kernel/time.c
Also, clean up some whitespace errors.
Jesper Nilsson [Mon, 28 Jan 2008 15:39:00 +0000 (16:39 +0100)]
CRIS: Register cpus in kernel/setup.c
Also, fix some white space errors, and constify cpuinfo_op.
Jesper Nilsson [Mon, 28 Jan 2008 15:34:30 +0000 (16:34 +0100)]
CRIS: Remove include of linux/init.h, not needed anymore.
Jesper Nilsson [Mon, 28 Jan 2008 15:33:21 +0000 (16:33 +0100)]
CRIS: Remove CONFIG_NO_IOMEM from ARTPEC-3 default config.
Jesper Nilsson [Mon, 28 Jan 2008 15:30:35 +0000 (16:30 +0100)]
CRIS: Remove useless CVS log from kernel/ptrace.c
Also, fix some whitespace errors.
Jesper Nilsson [Mon, 28 Jan 2008 15:29:21 +0000 (16:29 +0100)]
CRIS: Remove useless CVS id and log from kernel/process.c
Jesper Nilsson [Mon, 28 Jan 2008 15:28:10 +0000 (16:28 +0100)]
CRIS: Add configuration possibility for using kmalloc for modules.
Using kmalloc instead of vmalloc solves the stability problems
experienced by some 100 LX products.
Jesper Nilsson [Mon, 28 Jan 2008 15:25:13 +0000 (16:25 +0100)]
CRIS: Remove CONFIG_NO_IOMEM from default configs.
Jesper Nilsson [Wed, 30 Jan 2008 11:57:31 +0000 (12:57 +0100)]
CRIS v32: Fix startup oops and replace hardcoded pagesize in vmlinux.lds.S
- Move alignment of init data to page size outside define CONFIG_BLK_DEV_INITRD
This avoids oops due to memory on the same page as init data being freed.
- Change hardcoded page size to use macro from asm/page.h
- Add reserved memory via CONFIG_ETRAX_VMEM_SIZE.
- Use available defines for TEXT_TEXT and INITCALLS.
- Cleanup whitespace.
Jesper Nilsson [Fri, 25 Jan 2008 17:08:07 +0000 (18:08 +0100)]
CRIS v32: Avoid work when switching between tasks with shared memory descriptors in mm/tlb.c
There is no need to do all this work if they share memory descriptors.
Also, fix some minor whitespace and long lines.
Jesper Nilsson [Fri, 25 Jan 2008 17:05:12 +0000 (18:05 +0100)]
CRIS v32: Add workaround for MMU hardware bug for ETRAX FS in mm/mmu.S
Jesper Nilsson [Fri, 25 Jan 2008 17:03:00 +0000 (18:03 +0100)]
CRIS v32: Fix bug in internal memory allocator mm/intmem.c
- Fix bug where allocated memory didn't account for alignment.
- Add support for ARTPEC-3
- Add module_init for crisv32_intmem_init.
Jesper Nilsson [Fri, 25 Jan 2008 17:00:48 +0000 (18:00 +0100)]
CRIS v32: Change name of simulator config to CONFIG_ETRAX_VCS_SIM in mm/init.c
- Remove unneded code for ETRAX FS and ARTPEC-3
Jesper Nilsson [Fri, 25 Jan 2008 16:57:28 +0000 (17:57 +0100)]
CRIS v32: Change lib/spinlock.S to use byte operations instead of dwords.
Jesper Nilsson [Fri, 25 Jan 2008 16:55:31 +0000 (17:55 +0100)]
CRIS v32: Move hw_settings.S to machine specific directories for ETRAX FS and ARTPEC-3
Jesper Nilsson [Fri, 25 Jan 2008 16:54:14 +0000 (17:54 +0100)]
CRIS v32: Update lib/checksum.S and lib/checksumcopy.S
- Slight tweaks, use $acr + addoq to propagate carry across the loop boundary.
- Better use of latency cycles.
- Remove duplicate folding of carry, it is not needed.
Jesper Nilsson [Fri, 25 Jan 2008 16:32:01 +0000 (17:32 +0100)]
CRIS v32: Add lib/delay to build.
Jesper Nilsson [Fri, 25 Jan 2008 16:31:38 +0000 (17:31 +0100)]
CRIS v32: Add precise delay loops for ETRAX FS and ARTPEC-3.
Implements cris_delay10ns.
Jesper Nilsson [Fri, 25 Jan 2008 16:28:10 +0000 (17:28 +0100)]
CRIS v32: Update vcs_hook.c for ETRAX FS.
- Clean up some formatting and whitespace.
Jesper Nilsson [Fri, 25 Jan 2008 15:43:53 +0000 (16:43 +0100)]
CRIS v32: Move vcs_hook to machine specific directory.
These files are different for ETRAX FS and ARTPEC-3.
Jesper Nilsson [Fri, 25 Jan 2008 15:15:44 +0000 (16:15 +0100)]
CRIS v32: Update kernel/smp.c for CRIS v32.
- Change include paths to machine specific headers (asm/arch/hwregs -> hwregs)
- Add cpu_possible_map as cpumask_t and export it.
- Drop struct pt_regs parameter from crisv32_ipi_interrupt.
- timer -> timer0
Jesper Nilsson [Fri, 25 Jan 2008 15:10:02 +0000 (16:10 +0100)]
CRIS v32: Update signal handling in kernel/signal.c
- do_signal now returns void, and does not have the previous signal set
as a parameter.
- Remove sys_rt_sigsuspend, we can use the common one instead.
- Change sys_sigsuspend to be more like x86, don't call do_signal here.
- handle_signal, setup_frame and setup_rt_frame now return -EFAULT
if we've delivered a segfault, which is used by callers to perform
necessary cleanup.
- Break long lines, correct whitespace and formatting errors.
Jesper Nilsson [Fri, 25 Jan 2008 15:05:55 +0000 (16:05 +0100)]
CRIS v32: Update boot/rescue/rescue.ld
- Update to work for ETRAX FS and ARTPEC-3
Jesper Nilsson [Fri, 25 Jan 2008 14:42:41 +0000 (15:42 +0100)]
CRIS v10: Update drivers/gpio.c, fix locking and general improvements.
- Change all spin_lock/local_irq_save to spin_lock_irqsave.
- Change multiple returns in functions where we have a lock to goto out.
- Correct number of arguments to gpio_poll_timer_interrupt, gpio_pa_interrupt.
- Break out gpio_write logic to smaller functions to make it readable.
- In setget_input and setget_output, avoid extra if-indent level.
- Change name LED_* -> CRIS_LED_* to avoid name clash.
- Don't use braces around single statement ifs.
- Fix whitespace errors.
- Remove useless CVS id and log.
Jesper Nilsson [Fri, 25 Jan 2008 12:50:27 +0000 (13:50 +0100)]
CRIS: Add support for ETRAX FS and ARTPEC-3 to etraxgpio.h
The CRIS v32 architectures have more gpio ports and built in PWM.
Jesper Nilsson [Thu, 24 Jan 2008 13:37:10 +0000 (14:37 +0100)]
CRIS v32: Change names of config variable and register field for data available.
- CONFIG_ETRAXFS_SIM -> CONFIG_ETRAX_VCS_SIM
- ser_intr_mask.data_avail -> ser_intr_mask.dav
Jesper Nilsson [Thu, 24 Jan 2008 13:34:37 +0000 (14:34 +0100)]
CRIS v32: Change debug and formatting in kernel/fasttimer.c
- Don't use SANITYCHECK(x) as a macro, test FAST_TIMER_SANITY_CHECKS with
ifdef. This makes it possible for automatic indent etc to work.
- Correct some whitespace errors.
- Don't initialize static variable.
Jesper Nilsson [Thu, 24 Jan 2008 13:31:55 +0000 (14:31 +0100)]
CRIS v32: Update kernel/crisksyms.c
- Include pinmux.h from machine specific directory.
- Add some more symbols: crisv32_pinmux_alloc, crisv32_pinmux_dealloc_fixed,
crisv32_io_get_name and crisv32_io_get
Jesper Nilsson [Thu, 24 Jan 2008 13:30:01 +0000 (14:30 +0100)]
CRIS v32: Remove config ifdef around init function for drivers/sync_serial.c
The init function should be defined always.
Jesper Nilsson [Thu, 24 Jan 2008 13:25:18 +0000 (14:25 +0100)]
CRIS v32: Remove drivers/gpio.c, now exists as machine specific file.
Jesper Nilsson [Thu, 24 Jan 2008 13:24:09 +0000 (14:24 +0100)]
CRIS v32: Update driver for RTC chip pcf8563.
- Moved all calls to register_chrdev to a function called by module_init.
- Added mutex locking.
- Added better error handling at start up.
- Added BIN_TO_BCD of the month value before it is saved to the RTC.
- Corrected the month value returned by pcf8563_readreg.
- Cache the voltage low value at driver init so the battery status
information does not get 'accidentally' cleared when setting the RTC time.
- Removed obsolete CONFIG_ETRAX_RTC_READONLY
- Voltage low ioctl():s RTC_VLOW_RD -> RTC_VL_READ, RTC_VLOW_SET -> RTC_VL_CLR
Jesper Nilsson [Thu, 24 Jan 2008 13:17:47 +0000 (14:17 +0100)]
CRIS v32: Remove drivers/nandflash.h, now exists as machine specific file.
Jesper Nilsson [Thu, 24 Jan 2008 13:14:09 +0000 (14:14 +0100)]
CRIS v32: ETRAX FS Change name of LED macros in drivers/mach-fs/gpio.c to avoid collision.
Jesper Nilsson [Thu, 24 Jan 2008 13:13:12 +0000 (14:13 +0100)]
CRIS v32: Change name of LED macros in drivers/mach-a3/gpio.c to avoid collision.
Jesper Nilsson [Thu, 24 Jan 2008 13:12:10 +0000 (14:12 +0100)]
CRIS v32: Change include path for hwregs in drivers/iop_fw_load.c
Also, remove useless CVS id tag.
Jesper Nilsson [Thu, 24 Jan 2008 13:10:27 +0000 (14:10 +0100)]
CRIS v32: Rewrite of stream co-processor driver for ETRAX FS and ARTPEC-3
- Workaround for cachebug (Guinness TR 106).
- Add ARTPEC-3 support.
Jesper Nilsson [Thu, 24 Jan 2008 12:07:34 +0000 (13:07 +0100)]
CRIS v32: Replace build flags in boot/rescue/Makefile
- Change AFLAGS to asflags-y, LDFLAGS to ldflags-y and EXTRA_CFLAGS
to ccflags-y. We only need the flags in this Makefile.
Jesper Nilsson [Wed, 30 Jan 2008 11:55:56 +0000 (12:55 +0100)]
CRIS v32: Replace build flags in boot/compressed/Makefile
- Change AFLAGS to asflags-y, LDFLAGS to ldflags-y and KBUILD_CFLAGS
to ccflags-y. We only need the flags in this Makefile.
Jesper Nilsson [Wed, 23 Jan 2008 16:36:40 +0000 (17:36 +0100)]
CRIS v10: Change name of low voltage read and set macros.
Jesper Nilsson [Wed, 23 Jan 2008 10:11:34 +0000 (11:11 +0100)]
CRIS v32: Remove useless CVS id tag from boot/compressed/README
Jesper Nilsson [Mon, 21 Jan 2008 16:01:31 +0000 (17:01 +0100)]
CRIS: Fix bugs in return value of atomic_inc_return and atomic_dec_return.
Increment and decrement before assigning to return value.
Jesper Nilsson [Mon, 21 Jan 2008 15:38:41 +0000 (16:38 +0100)]
CRIS: Allow arch dependent delay to override common version.
Jesper Nilsson [Mon, 21 Jan 2008 14:51:13 +0000 (15:51 +0100)]
CRIS: Include arch dependent bug.h.
Jesper Nilsson [Mon, 21 Jan 2008 14:49:43 +0000 (15:49 +0100)]
CRIS: Correct pfn_pte to make it possible to ioremap uncached addresses.
Jesper Nilsson [Mon, 21 Jan 2008 14:38:22 +0000 (15:38 +0100)]
CRIS: Correct comment in io.h to describe reality of I/O space.
The old comment stated that it was "junk needed for the arch-independent code
but which we never use in the CRIS port", but this is no longer true.
Jesper Nilsson [Mon, 21 Jan 2008 14:15:09 +0000 (15:15 +0100)]
CRIS: Update cpu_possible_map and raw_smp_processor_id in smp.h header.
- Change name of __smp_processor_id to raw_smp_processor_id.
- cpu_possible_map is no longer a define for phys_cpu_present_map,
it is now a cpumask_t.
Jesper Nilsson [Mon, 21 Jan 2008 13:11:22 +0000 (14:11 +0100)]
CRIS v10: Remove duplicated folding of carry from lib/checksum.S, it is not needed.
Also, remove useless CVS id tag.
Jesper Nilsson [Mon, 21 Jan 2008 13:10:33 +0000 (14:10 +0100)]
CRIS v10: Remove duplicated folding of carry from lib/checksumcopy.S, it is not needed.
Also, remove useless CVS id tag.
Jesper Nilsson [Mon, 21 Jan 2008 13:06:32 +0000 (14:06 +0100)]
CRIS v10: Clear TIF_SYSCALL_TRACE flag in ptrace_disable in kernel/ptrace.c
Jesper Nilsson [Tue, 29 Jan 2008 10:27:19 +0000 (11:27 +0100)]
CRIS v10: Update kernel/io_interface_mux.c
Fixed a bug where two interfaces using pins in the same pin group could
not be allocated at the same time even if there where no pin collisions.
Change all restore and returns into goto exit pattern.
Also, remove useless CVS id and correct chapter reference for ETRAX100LX
Designer's Reference in comment.
Jesper Nilsson [Mon, 21 Jan 2008 10:52:52 +0000 (11:52 +0100)]
CRIS v10: Setup serial port 2 to avoid accidental TXD pulse on startup.
If serial port 2 is used, select it in R_GEN_CONFIG.
If serial port 2 is used, setup the control registers for the port.
This is done to avoid a pulse on the TXD line during start up,
which could disturb some units.
Also, remove useless CVS id and log.
Jesper Nilsson [Mon, 21 Jan 2008 10:44:11 +0000 (11:44 +0100)]
CRIS v10: Add synchronous serial port driver for CRIS v10.
Jesper Nilsson [Mon, 21 Jan 2008 10:28:16 +0000 (11:28 +0100)]
CRIS v10: Don't call get_mmu_context when switching between tasks with shared memory descriptors
Also, cleanup formatting and fix whitespace errors.
Jesper Nilsson [Mon, 21 Jan 2008 10:14:59 +0000 (11:14 +0100)]
CRIS v10: Fix bug where error returns didn't restore irqs in mm/fault.c
Don't return when we're inside local_irq_disable(), use goto exit instead.
Also, cleanup some whitespace errors.
Jesper Nilsson [Mon, 21 Jan 2008 10:11:25 +0000 (11:11 +0100)]
CRIS v10: Remove useless CVS id tag from lib/old_checksum.c
Jesper Nilsson [Mon, 21 Jan 2008 10:10:54 +0000 (11:10 +0100)]
CRIS v10: Remove useless CVS id and log from lib/dram_init.S
Jesper Nilsson [Mon, 21 Jan 2008 10:09:56 +0000 (11:09 +0100)]
CRIS v10: Remove useless CVS id from kernel/shadows.c
Jesper Nilsson [Mon, 21 Jan 2008 10:07:49 +0000 (11:07 +0100)]
CRIS v10: Reformat drivers/makefile using tabs.
Jesper Nilsson [Mon, 21 Jan 2008 10:05:40 +0000 (11:05 +0100)]
CRIS: Move common Kconfig variable ETRAX_RTC to arch independet Kconfig.
Jesper Nilsson [Mon, 21 Jan 2008 10:01:33 +0000 (11:01 +0100)]
CRIS: Remove NO_IOMEM config, we have IO memory.
Jesper Nilsson [Fri, 18 Jan 2008 14:23:48 +0000 (15:23 +0100)]
CRIS v10: Remove CVS id from kernel/process.c
Jesper Nilsson [Fri, 18 Jan 2008 14:23:21 +0000 (15:23 +0100)]
CRIS v10: Remove CVS log and id from kernel/kgdb.c
Jesper Nilsson [Fri, 18 Jan 2008 14:22:30 +0000 (15:22 +0100)]
CRIS v10: Cleanup kernel/irq.c
- Remove useless CVS id tag.
- Remove no longer needed extern declarations for kgdb.
Jesper Nilsson [Fri, 18 Jan 2008 13:31:19 +0000 (14:31 +0100)]
CRIS v10: Cleanup kernel/fasttimer.c
- Change C99 comment style to C89.
- Remove superfluous SANITYCHECK macro, test FAST_TIMER_SANITY_CHECKS instead.
Jesper Nilsson [Fri, 18 Jan 2008 12:50:31 +0000 (13:50 +0100)]
CRIS v10: Cleanup kernel/entry.S CVS log and id.
Jesper Nilsson [Fri, 18 Jan 2008 12:49:31 +0000 (13:49 +0100)]
CRIS v10: Remove CVS id tag from kernel/dma.c
Jesper Nilsson [Fri, 18 Jan 2008 12:48:02 +0000 (13:48 +0100)]
CRIS v10: Break long lines in boot/rescue/head.S
Jesper Nilsson [Fri, 18 Jan 2008 12:47:09 +0000 (13:47 +0100)]
CRIS v10: Remove CVS tag from boot/compressed/misc.c
Jesper Nilsson [Fri, 18 Jan 2008 12:44:13 +0000 (13:44 +0100)]
CRIS v10: Update and fix bug in kernel/debugport.
- Move local_irq_save to after possible return in console_write_direct.
- Remove old raw_printk hack, not needed anymore.
- Add watchdog handling.
- Make serial_driver use depend on CONFIG_ETRAX_SERIAL.
- Remove useless CVS log.
Jesper Nilsson [Thu, 17 Jan 2008 15:01:45 +0000 (16:01 +0100)]
CRIS v10: Cleanup rtc.h
- Change RTC_VLOW_RD -> RTC_VL_READ, RTC_VLOW_SET -> RTC_VL_CLR
- Whitespace and formatting.
Jesper Nilsson [Thu, 17 Jan 2008 14:17:07 +0000 (15:17 +0100)]
CRIS v10: Update driver for pcf8563
- Use mutex instead of spinlock, fixes kernel bugzilla report 8339.
- Make sure that pcf8563_init can be called multiple times but only setup once.
- Change RTC_VLOW_RD -> RTC_VL_READ, RTC_VLOW_SET -> RTC_VL_CLR
- Cache the voltage low value at driver init so the battery status
information does not get 'accidentally' cleared when setting the RTC time.
- Add weekday handling.
- Correct leapyear handling to include 100 and 400 year exceptions.
- Correct whitespace and formatting errors.
- Remove useless CVS id tag.
Jesper Nilsson [Thu, 17 Jan 2008 13:50:47 +0000 (14:50 +0100)]
CRIS v10: Fix bugs in i2c_init and i2c_readreg
- Set the variable first to zero after first setup, so we can
stop multiple calls to i2c_init from trying to setup i2c.
- The last byte read by the master in an i2c transfer needs to
be NACKed, not ACKed.
- Also, remove useless CVS log and CVS id tags.
Jesper Nilsson [Thu, 17 Jan 2008 13:44:00 +0000 (14:44 +0100)]
CRIS v10: Cleanup drivers/eeprom.c to avoid import conflicts.
- Remove useless CVS log and CVS id tags.
- Whitespace fix and remove C++ comment.
Jesper Nilsson [Thu, 17 Jan 2008 10:33:45 +0000 (11:33 +0100)]
CRIS v10: Correct and cleanup boot/rescue/testrescue.S
- Correct include path for sv_addr_ag.h, should be asm/arch/
- Fix some whitespace errors.
- Remove useless CVS id tag.
Jesper Nilsson [Thu, 17 Jan 2008 10:30:21 +0000 (11:30 +0100)]
CRIS v10: Correct and cleanup boot/rescue/kimagerescue.S
- Correct include path for sv_addr_ag.h, should be included from asm/arch/
- Remove useless CVS id tag.
- Correct whitespace errors and some formatting.
Jesper Nilsson [Thu, 17 Jan 2008 10:22:41 +0000 (11:22 +0100)]
CRIS v10: Change boot/rescue/Makefile to use ccflags-y, asflags-y and ldflags-y.
Replace EXTRA_CFLAGS with ccflags-y.
Change ASFLAGS and LDFLAGS into asflags-y and ldflags-y, we only need
these flags in this makefile.
Jesper Nilsson [Thu, 17 Jan 2008 10:13:21 +0000 (11:13 +0100)]
CRIS v10: Update boot/compressed/Makefile to use ccflags-y and ldflags-y
Replace use of EXTRA_CFLAGS with ccflags-y and LDFLAGS with ldflags-y,
(we only need to change linker flags for this makefile)
Jesper Nilsson [Thu, 17 Jan 2008 09:42:58 +0000 (10:42 +0100)]
CRIS: Add architecture dependent bug.h for CRIS v10 and CRIS v32
Jesper Nilsson [Tue, 4 Dec 2007 16:25:45 +0000 (17:25 +0100)]
CRIS v32: Update and improve kernel/time.c
- Shorten include paths to machine dependent header files.
- Register name for first timer is now regi_timer0.
- Remove raw_printk hack, use oops_in_progress instead.
- Add handling of CPU frequency scaling for CRIS.
- Remove regs parameter to timer_interrupt, get them from get_irq_regs instead.
- Whitespace and formatting changes.
Jesper Nilsson [Mon, 3 Dec 2007 10:37:14 +0000 (11:37 +0100)]
CRIS v10: New default config.
Jesper Nilsson [Mon, 3 Dec 2007 10:16:25 +0000 (11:16 +0100)]
CRIS v32: Minor fixes for io.h
- Shorten include paths for machine dependent header files.
- Add volatile to hardeware register pointers.
- Add spinlocks around critical region.
- Expand macros for handling of leds.
Jesper Nilsson [Mon, 3 Dec 2007 10:12:10 +0000 (11:12 +0100)]
CRIS v32: Update and improve kernel/traps.c
- Remove watchdog handling, handled elsewhere.
- Shorten include paths to machine dependent header files.
- Remove raw_printk hack, we now use oops_in_progress instead.
- Add handling of BUG for exception handlers (break 14).
- Formatting and whitespace changes.
Jesper Nilsson [Mon, 3 Dec 2007 09:54:15 +0000 (10:54 +0100)]
CRIS v32: Minor updates to kernel/process.c
- Shorten include paths for machine dependent header files.
- Remove unused extern declaration of etrax_gpio_wake_up_check.
- Register name for first timer is now regi_timer0.
Jesper Nilsson [Fri, 30 Nov 2007 17:09:54 +0000 (18:09 +0100)]
CRIS v32: Update and simplify kernel/irq.c.
- First timer register has changed name to timer0.
- Build IRQs with only IRQ number, mask bit will be calculated instead.
- Add more IRQs, up to 64 supported.
- Use arrays to hold which IRQs triggered instead of trying to do magic
with two 32 bit values now that more than 32 IRQs are supported.
Jesper Nilsson [Fri, 30 Nov 2007 16:54:12 +0000 (17:54 +0100)]
CRIS v32: Update kernel/head.S
- Shorten include paths for machine specific header files.
- Add magic for booting NAND flash.
- Change CONFIG_ETRAXFS_SIM to CONFIG_ETRAX_VCS_SIM.
- Use assembler macros for initializing hardware (clocks)
- Add stubs for SMP slave CPUs.
- Search for cramfs or jffs2 if no romfs found.
- Initialize l2cache.
Jesper Nilsson [Fri, 30 Nov 2007 16:46:11 +0000 (17:46 +0100)]
CRIS v32: Update and improve fasttimer.c
- Change include path to machine dependent header files.
- Remove __INLINE__, it expands to inline anyway.
- Don't initialize static variables.
- Change timers to use fasttimer_t instead of timevals.
- Change name of timeval_cmp to fasttime_cmp to highlight this.
- Register name for first timer is regi_timer0, not regi_timer.
- Whitespace and formatting changes.
- Don't return if we're blocking interrupts, goto done and restore interrupts.
- Disable interrupts while walking the fasttimer list, only restore
while doing the callback.
- Remove #ifdef DECLARE_WAITQUEUE, this code won't be used in another OS.
- Remove CVS log.
Jesper Nilsson [Fri, 30 Nov 2007 16:28:05 +0000 (17:28 +0100)]
CRIS v32: Include path fix for timex.h
- Shorten include path for machine dependent header files.
- Correct some formatting issues.
Jesper Nilsson [Fri, 30 Nov 2007 16:26:23 +0000 (17:26 +0100)]
CRIS v32: Update debugport.
- Shorten include paths to machine dependent headers.
- Add support for fifth serial port.
- Remove CONFIG_ETRAXFS_SIM and CONFIG_ETRAX_DEBUG_PORT_NULL, no longer used.
- Remove raw_printk and stupid_debug hack, no longer needed.
- Remove dummy console stuff, no longer needed.
- Correct some register type names.
- Correct some whitespace errors and formatting.
Jesper Nilsson [Fri, 30 Nov 2007 16:20:00 +0000 (17:20 +0100)]
CRIS v32: Update boot/rescue/head.S code.
- Add ifdef for ETRAX_AXISFLASHMAP to avoid compiling file unless it is set.
- Use assembler macros for setting up clocks.
- Don't copy image, just jump to it (only works for NOR flash)
Jesper Nilsson [Fri, 30 Nov 2007 16:16:09 +0000 (17:16 +0100)]
CRIS v32: Update boot/compressed/misc.c
- Shorten include paths to machine specific headers.
- Remove fill_inbuf, not defined here.
- Return __dest as value from memcpy.
- Enable serial port hardware transmitter and receiver in serial_setup.
- Correct baudrate divisor calculation, changed from 4800 to 115200.
- Add support for Artpec-3 specific serial port setup.
- Initialize pinmux for the correct serial port.
Jesper Nilsson [Fri, 30 Nov 2007 15:40:26 +0000 (16:40 +0100)]
CRIS v32: Update compressed head.S
- Fixes for NAND and NOR flash booting.
- Use assembler macros for common tasks (clocks, general io etc)
- Use (EtraxFS or Artpec-3) machine specific include for dram and hardware init.
This page took 0.040346 seconds and 5 git commands to generate.