Olof Johansson [Wed, 12 Jun 2013 23:12:03 +0000 (16:12 -0700)]
Merge tag 's3c24xx-arch-1' of git://git./linux/kernel/git/kgene/linux-samsung into next/soc
From Kukjin Kim, DMA driver updates for s3c24xx.
* tag 's3c24xx-arch-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S3C24XX: remove obsolete s3c2412 specific dma settings
ARM: S3C24XX: dma-s3c2443 - do not write into arbitary bits
ARM: S3C24XX: split s3c2412 spi dma channels
Signed-off-by: Olof Johansson <olof@lixom.net>
Dinh Nguyen [Wed, 5 Jun 2013 15:02:56 +0000 (10:02 -0500)]
ARM: socfpga: Add syscon to be part of socfpga
SOCFPGA has a system manager register block can be accessed by using
the syscon driver.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: <linux@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Dinh Nguyen [Wed, 5 Jun 2013 15:02:55 +0000 (10:02 -0500)]
ARM: socfpga: Add support to gate peripheral clocks
Add support to gate the clocks that directly feed peripherals. For clocks
with multiple parents, add the ability to determine the correct parent,
and also set parents. Also add support to calculate and set the clocks'
rate.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Cc: Pavel Machek <pavel@denx.de>
CC: <linux@arm.linux.org.uk>
v4:
- Add Acked-by: Mike Turquette
v3:
- Addressed comments from Pavel
v2:
- Fix space/indent errors
- Add streq for strcmp == 0
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Jun 2013 22:57:17 +0000 (15:57 -0700)]
Merge branch 'clps711x/soc' into next/soc
From Alexander Shiyan, this is a series of cleanups of clps711x, movig it
closer to multiplatform and cleans up a bunch of old code.
* clps711x/soc:
ARM: clps711x: Update defconfig
ARM: clps711x: Add support for SYSCON driver
ARM: clps711x:
edb7211: Control LCD backlight via PWM
ARM: clps711x:
edb7211: Add support for I2C
ARM: clps711x: Optimize interrupt handling
ARM: clps711x: Add clocksource framework
ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"
ARM: clps711x: Move specific definitions from hardware.h to boards files
ARM: clps711x: p720t: Define PLD registers as GPIOs
ARM: clps711x: autcpu12: Move remaining specific definitions to board file
ARM: clps711x: autcpu12: Special driver for handling memory is removed
ARM: clps711x: autcpu12: Add support for NOR flash
ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file
ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source
ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency
ARM: clps711x: Re-add GPIO support
GPIO: clps711x: Add DT support
GPIO: clps711x: Rewrite driver for using generic GPIO code
+ Linux 3.10-rc4
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:37 +0000 (21:07 +0400)]
ARM: clps711x: Update defconfig
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:36 +0000 (21:07 +0400)]
ARM: clps711x: Add support for SYSCON driver
This patch adds support for SYSCON driver for CLPS711X targets.
At this time there are no users for this driver, but it is will
be used as start point to use in CLPS711X drivers and remove
<mach/xx> dependencies.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:35 +0000 (21:07 +0400)]
ARM: clps711x:
edb7211: Control LCD backlight via PWM
This patch provide control LCD backlight via PWM. GPIO is used
only for switch backlight ON and OFF.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:34 +0000 (21:07 +0400)]
ARM: clps711x:
edb7211: Add support for I2C
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:33 +0000 (21:07 +0400)]
ARM: clps711x: Optimize interrupt handling
This patch modify interrupt handler for processing all penging interrupts
at once.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:32 +0000 (21:07 +0400)]
ARM: clps711x: Add clocksource framework
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:31 +0000 (21:07 +0400)]
ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:30 +0000 (21:07 +0400)]
ARM: clps711x: Move specific definitions from hardware.h to boards files
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:29 +0000 (21:07 +0400)]
ARM: clps711x: p720t: Define PLD registers as GPIOs
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:28 +0000 (21:07 +0400)]
ARM: clps711x: autcpu12: Move remaining specific definitions to board file
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:27 +0000 (21:07 +0400)]
ARM: clps711x: autcpu12: Special driver for handling memory is removed
This patch provide migration to using "mtd-ram" driver instead of using
special driver for handling NVRAM memory.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:26 +0000 (21:07 +0400)]
ARM: clps711x: autcpu12: Add support for NOR flash
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:24 +0000 (21:07 +0400)]
ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file
We do not have driver for Up/Down digital potentiometer (DPOT), so
just define pins as GPIOs and export these pins to user.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:23 +0000 (21:07 +0400)]
ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source
This clock will be used in audio subsystem. Since audio cannot work
without PLL we should indicate this.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Mon, 13 May 2013 17:07:20 +0000 (21:07 +0400)]
ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency
This patch removes dependency of NEED_MACH_MEMORY_H for CLPS711X-target.
Since some board may have memory holes, define ARCH_HAS_HOLES_MEMORYMODEL
for these boards.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Fri, 26 Apr 2013 15:47:29 +0000 (19:47 +0400)]
ARM: clps711x: Re-add GPIO support
arch_initcall was been removed from GPIO driver, so this patch
re-add support for GPIO into boards as platform_device.
Since some drivers (spi, nand, etc.) is not support deferred probe,
separate machine init calls is used in board code to make proper
loading sequence.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Fri, 26 Apr 2013 15:47:30 +0000 (19:47 +0400)]
GPIO: clps711x: Add DT support
Add DT support to the CLPS711X GPIO driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Fri, 26 Apr 2013 15:47:28 +0000 (19:47 +0400)]
GPIO: clps711x: Rewrite driver for using generic GPIO code
This patch provides rewritten driver for CLPS711X GPIO which uses
generic GPIO code.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Jun 2013 07:31:14 +0000 (00:31 -0700)]
Merge tag 'renesas-soc-for-v3.11' of git://git./linux/kernel/git/horms/renesas into next/soc
From Simon Horman:
Renesas ARM-based SoC updates for v3.11
* Increased clock coverage for r8a7740, r8a73a4, r8a7778 and r8a7790
* Use fixed clock ratio for r8a7778
* Always use shmobile_setup_delay for sh73a0
* Add add CPUFreq support for sh73a0
* Check kick bit before changing rate on sh73a0
* Do not overwrite all div4 clock operations on sh73a0
* Cleanup SH_FIXED_RATIO_CLK and SH_FIXED_RATIO_CLK macros
* sh73a0: Use DEFINE_RES_MEM*() everywhere
* r8a7740: Make private clock arrays static
* r8a7778: Correct model number
The last four changes listed above are cleanups. I have included them
in this series as all bar the last one are dependencies of non-cleanup
patches.
* tag 'renesas-soc-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (27 commits)
ARM: shmobile: sh73a0: div4 clocks must check the kick bit before changing rate
ARM: shmobile: sh73a0: do not overwrite all div4 clock operations
ARM: shmobile: sh73a0: Always use shmobile_setup_delay()
ARM: shmobile: sh73a0: add CPUFreq support
ARM: shmobile: sh73a0: add support for adjusting CPU frequency
ARM: shmobile: r8a7790: add TPU PWM support
ARM: shmobile: r8a7790: Make private clock arrays static
ARM: shmobile: r8a7790: add div6 clocks
ARM: shmobile: r8a7790: add div4 clocks
ARM: shmobile: r8a7790: add main clock
ARM: shmobile: r8a7778: Register SDHI device
ARM: shmobile: r8a7778: add SDHI clock support
ARM: shmobile: r8a7778: use fixed ratio clock
ARM: shmobile: r8a7779: Add PCIe clocks
ARM: shmobile: r8a73a4: add div6 clocks
ARM: shmobile: r8a73a4: add div4 clocks
ARM: shmobile: r8a73a4: add pll clocks
ARM: shmobile: r8a73a4: add main clock
ARM: shmobile: r8a7740: add TPU PWM support
ARM: shmobile: r8a7740: Add I2C DT clock names
...
Conflicts:
arch/arm/mach-shmobile/Kconfig
arch/arm/mach-shmobile/include/mach/r8a7778.h
arch/arm/mach-shmobile/setup-r8a7778.c
Olof Johansson [Tue, 11 Jun 2013 07:21:46 +0000 (00:21 -0700)]
Merge tag 'renesas-pinmux-for-v3.11' of git://git./linux/kernel/git/horms/renesas into next/soc
From Simon Horman:
Renesas ARM based SoC pinmux and GPIO update for v3.11
SH-PFC:
* Entries for INTC external IRQs
* Remove dependency on GPIOLIB
* PFC support for r8a7790 SoC
* Pinmux support for r8a7778 SoC
* Increase pin group and function coverage for sh7372, r8a7740,
r8a7778, r8a7779 and r8a7790 SoCs
* Use pinctrl mapping on mackerel, ap4evb, armadillo800eva,
bonito, bockw, lager boards
* Use RCAR_GP_PIN macro in marzen board
* Remove unused GPIOs for sh7372, sh73a0, r8a7740 and r8a7790 SoCs
* Add bias (pull-up/down) pinconf support for r8a7740 SoC
* Add VCCQ support for sh73a0
GPIO car:
* Add RCAR_GP_PIN macro
* Add support for IRQ_TYPE_EDGE_BOTH
* Make the platform data gpio_base field signed
The GPIO changes have been included as the RCAR_GP_PIN and
IRQ_TYPE_EDGE_BOTH changes are depended on by SH-PFC changes.
* tag 'renesas-pinmux-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (132 commits)
ARM: shmobile: marzen: Use RCAR_GP_PIN macro
ARM: shmobile: lager: Initialize pinmux
ARM: shmobile: bockw: add pinctrl support
ARM: shmobile: kzm9g: tidyup FSI pinctrl
ARM: shmobile: r8a7740 pinmux platform device cleanup
ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH
pinctrl: sh-pfc: r8a7779: Fix missing MOD_SEL2 entry
Revert "ARM: shmobile: Disallow PINCTRL without GPIOLIB"
pinctrl: r8a7790: add pinmux data for MMCIF and SDHI interfaces
sh-pfc: r8a7778: add MMCIF pin groups
sh-pfc: r8a7778: add HSPI pin groups
sh-pfc: r8a7778: add I2C pin groups
pinctrl: sh-pfc: fix a typo in pfc-r8a7790
pinctrl: sh-pfc: fix r8a7790 Function Select register tables
sh-pfc: r8a7778: fixup IRQ1A settings
sh-pfc: r8a7779: add Ether pin groups
sh-pfc: r8a7778: add Ether pin groups
sh-pfc: r8a7778: add VIN pin groups
sh-pfc: sh73a0: Remove function GPIOs
sh-pfc: r8a7790: Add TPU pin groups and functions
...
Olof Johansson [Tue, 11 Jun 2013 04:50:49 +0000 (21:50 -0700)]
Merge tag 'pcie_kw-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper:
mvebu pcie driver (kirkwood) for v3.11 (round 2)
- kirkwood
- migrate Netgear ReadyNAS Duo v2 to pcie DT init
* tag 'pcie_kw-3.11-2' of git://git.infradead.org/users/jcooper/linux:
arm: kirkwood: NETGEAR ReadyNAS Duo v2 init PCIe via DT
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 8 Jun 2013 00:01:42 +0000 (17:01 -0700)]
Merge tag 'zynq-clk-for-3.11' of git://git.xilinx.com/linux-xlnx into next/soc
From Michal Simek:
arm: Xilinx Zynq clock changes for v3.11
Change Xilinx Zynq DT clock description which reflects logical abstraction
of Zynq's clock tree.
- Refactor PLL driver
- Use new clock controller driver
- Change timer and uart drivers
* tag 'zynq-clk-for-3.11' of git://git.xilinx.com/linux-xlnx:
clk: zynq: Remove deprecated clock code
arm: zynq: Migrate platform to clock controller
clk: zynq: Add clock controller driver
clk: zynq: Factor out PLL driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Guennadi Liakhovetski [Wed, 22 May 2013 22:10:00 +0000 (00:10 +0200)]
ARM: shmobile: sh73a0: div4 clocks must check the kick bit before changing rate
According to the datasheet, it is not allowed to change div4 clock rates
if an earlier rate change operation is still in progress, as indicated by
a set kick bit.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Wed, 22 May 2013 22:09:36 +0000 (00:09 +0200)]
ARM: shmobile: sh73a0: do not overwrite all div4 clock operations
An earlier commit "ARM: shmobile: sh73a0: add support for adjusting CPU
frequency" intended to replace some clock operations only for the Z-clock,
instead it replaced them for all div4 clocks, since all div4 clocks share
the same copy of clock operations. Fix this by using a separate clock
operations structure for Z-clock.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 22 May 2013 06:04:14 +0000 (15:04 +0900)]
ARM: shmobile: sh73a0: Always use shmobile_setup_delay()
Break out the function sh73a0_init_delay() that now
gets called both for the C version of the code and
the DT -reference boards. This way we handle both
cases in the same way.
Allows us to boot with TWD only in the kernel configuration
for C board code. TWD is not yet enabled in the case of
DT -reference - this due to a dependency on CCF.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Fri, 5 Apr 2013 10:00:38 +0000 (12:00 +0200)]
ARM: shmobile: sh73a0: add CPUFreq support
This patch enables the use of the generic cpufreq-cpu0 driver on sh73a0.
Providing a regulator, a list of OPPs in DT, combined with a virtual
cpufreq-cpu0 platform device and a clock, attached to it is everything,
the cpufreq-cpu0 driver needs. The first sh73a0 platform, implementing
such CPUFreq support is kzm9g-reference.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Fri, 5 Apr 2013 10:00:36 +0000 (12:00 +0200)]
ARM: shmobile: sh73a0: add support for adjusting CPU frequency
On SH73A0 the output of PLL0 is supplied to two dividers, feeding clock to
the CPU core and SGX. Lower CPU frequencies allow the use of lower supply
voltages and thus reduce power consumption.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 24 Apr 2013 20:36:01 +0000 (22:36 +0200)]
ARM: shmobile: r8a7790: add TPU PWM support
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 16 Apr 2013 15:16:20 +0000 (17:16 +0200)]
ARM: shmobile: r8a7790: Make private clock arrays static
Both clock-r8a7740.c and clock-r8a7790.c define a div4_clks array as
non-static. Compiling support for both SoCs thus result in a symbol
redefinition. Fix it by defining the arrays as static.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 12 Apr 2013 07:43:09 +0000 (00:43 -0700)]
ARM: shmobile: r8a7790: add div6 clocks
DIV6 clocks control SD*/MMC* core clocks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 12 Apr 2013 07:42:52 +0000 (00:42 -0700)]
ARM: shmobile: r8a7790: add div4 clocks
DIV4 clocks control SD* core clocks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 12 Apr 2013 07:42:22 +0000 (00:42 -0700)]
ARM: shmobile: r8a7790: add main clock
Almost all clock needs main clock which is basis clock on r8a7790.
This patch adds it, and, set its parent/ratio via MD pin.
It is based on v0.05 datasheet
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 17 Apr 2013 05:17:25 +0000 (22:17 -0700)]
ARM: shmobile: r8a7778: Register SDHI device
This patch adds SDHI register function which needs id number (= 0/1/2)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 17 Apr 2013 05:17:04 +0000 (22:17 -0700)]
ARM: shmobile: r8a7778: add SDHI clock support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 12 Apr 2013 08:13:14 +0000 (01:13 -0700)]
ARM: shmobile: r8a7778: use fixed ratio clock
R-Car M1 has many clocks, and it is possible to
read/use clock ratio of these clocks from FRQMRx.
But, these ratio are fixed value and
these are decided by MD pin status.
This patch reads MD pin status,
and used fixed ratio clock for other clocks.
It was tesed on bock-w board.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Phil Edworthy [Tue, 9 Apr 2013 14:35:15 +0000 (14:35 +0000)]
ARM: shmobile: r8a7779: Add PCIe clocks
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 5 Apr 2013 04:22:41 +0000 (21:22 -0700)]
ARM: shmobile: r8a73a4: add div6 clocks
DIV6 clocks control each core clocks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 5 Apr 2013 04:22:16 +0000 (21:22 -0700)]
ARM: shmobile: r8a73a4: add div4 clocks
DIV4 clocks control each core clocks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 5 Apr 2013 04:21:39 +0000 (21:21 -0700)]
ARM: shmobile: r8a73a4: add pll clocks
PLL clocks are basis clock for other clock.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 5 Apr 2013 04:20:40 +0000 (21:20 -0700)]
ARM: shmobile: r8a73a4: add main clock
Almost all clock needs main clock which is basis clock on r8a73a4.
This patch adds it, and, set parent clock via CKSCR register.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 26 Oct 2012 13:38:47 +0000 (15:38 +0200)]
ARM: shmobile: r8a7740: add TPU PWM support
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Bastian Hecht [Wed, 17 Apr 2013 10:34:03 +0000 (12:34 +0200)]
ARM: shmobile: r8a7740: Add I2C DT clock names
Add clock association for i2c0 and i2c1 for the new DT names.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Bastian Hecht [Tue, 18 Dec 2012 17:22:38 +0000 (17:22 +0000)]
ARM: shmobile: r8a7740: Add interim sh-eth device name to clocks list
When we use the ethernet device via DT setup, we need to add it
to a lookup list until this is properly handled later in a DT-only
fashion.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 9 Apr 2013 05:33:44 +0000 (22:33 -0700)]
ARM: shmobile: r8a7778: fixup Ether setup code position
Ether setup code position was scattering.
This patch fixes it up
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 12 Apr 2013 07:41:07 +0000 (00:41 -0700)]
ARM: shmobile: use do{ }while() on SH_CLK_SET_RATIO()
SH_CLK_SET_RATIO() will be trouble without this patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 4 Apr 2013 07:05:42 +0000 (00:05 -0700)]
ARM: shmobile: remove ";" from SH_FIXED_RATIO_CLK*() macro
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 23 Apr 2013 02:27:15 +0000 (02:27 +0000)]
ARM: shmobile: sh73a0: Use DEFINE_RES_MEM*() everywhere
Convert code to use DEFINE_RES_MEM*() macros.
These macros were already used in this file,
this change makes their usage consistent throughout the file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Thu, 9 May 2013 00:05:40 +0000 (00:05 +0000)]
ARM: shmobile: r8a7778: correct model name in Kconfig
The correct model name is R-Car M1A or R8A77781; R8A77780 corresponds to R-Car
M1S which is a SH based SoC.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms+renesas@verge.net.au: manually applied]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 16 Apr 2013 15:16:19 +0000 (17:16 +0200)]
ARM: shmobile: r8a7740: Make private clock arrays static
Both clock-r8a7740.c and clock-r8a7790.c define a div4_clks array as
non-static. Compiling support for both SoCs thus result in a symbol
redefinition. Fix it by defining the arrays as static.
To avoid further similar issues, also define the main_clks as static.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 10:05:32 +0000 (12:05 +0200)]
ARM: shmobile: marzen: Use RCAR_GP_PIN macro
Replace hardcoded pin numbers with the RCAR_GP_PIN macro to make the
code match the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:22 +0000 (11:36 +0200)]
ARM: shmobile: lager: Initialize pinmux
Initialize r8a7790 pinmuxing and register mappings for the two debug
serial ports.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 12 Apr 2013 05:38:03 +0000 (05:38 +0000)]
ARM: shmobile: bockw: add pinctrl support
SCIF0 support as 1st step
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 23 May 2013 01:34:10 +0000 (18:34 -0700)]
ARM: shmobile: kzm9g: tidyup FSI pinctrl
sh73a0 needs "sh_fsi2", not "sh_fsi2.0"
Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 3 Apr 2013 06:32:58 +0000 (15:32 +0900)]
ARM: shmobile: r8a7740 pinmux platform device cleanup
Use DEFINE_RES_MEM() and platform_device_register_simple()
to save a couple of lines of code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 13 May 2013 08:53:52 +0000 (17:53 +0900)]
ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH
"gpio-rcar: Support IRQ_TYPE_EDGE_BOTH" adds support to the R-Car GPIO
driver for IRQ_TYPE_EDGE_BOTH. As hardware support for this feature is
not universal for all SoCs a flag, has_both_edge_trigger, has been
added to the platform data of the driver to allow this feature to be
enabled.
As the r8a7790 SoC hardware supports this feature enable it.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Phil Edworthy [Mon, 3 Jun 2013 07:52:28 +0000 (08:52 +0100)]
pinctrl: sh-pfc: r8a7779: Fix missing MOD_SEL2 entry
The list of functions selected by the MOD_SEL2 register was missing
an entry. This caused all entries after this to modify the MOD_SEL2
register incorrectly.
This bug showed up when selecting i2c2_c pins on the Renesas Hurricane board.
This bug has been present since pinmux support was added for the
r8a7779 SoC by
881023d28b465eb457067dc8bbca0f24d8b34279 ("sh-pfc: Add
r8a7779 pinmux support") in v3.8-rc4.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 31 May 2013 03:00:27 +0000 (05:00 +0200)]
Revert "ARM: shmobile: Disallow PINCTRL without GPIOLIB"
GPIOLIB dependency handling was added to the PINCTRL core by
commit
2afe8229687ec24cbc07e78449a588bb8b68f858
Author: Haojian Zhuang <haojian.zhuang@linaro.org>
Date: Thu Mar 28 07:34:19 2013 +0800
pinctrl: core: add dependence of GPIOLIB
There is not need to handle that dependency at the SH Mobile level
anymore. Revert
commit
6722f6cb763203cab775297b6e9d00834af0d6d7
Author: Magnus Damm <damm@opensource.se>
Date: Mon Mar 18 22:58:18 2013 +0900
ARM: shmobile: Disallow PINCTRL without GPIOLIB
Modify mach-shmobile to only select PINCTRL in case of
ARCH_WANT_OPTIONAL_GPIOLIB is set.
This fixes a build error triggered when adding a new SoC
lacking GPIO software support (ARCH_WANT_OPTIONAL_GPIOLIB=n):
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Fri, 17 May 2013 14:55:12 +0000 (16:55 +0200)]
pinctrl: r8a7790: add pinmux data for MMCIF and SDHI interfaces
This patch adds pinmux groups and functions for the two MMCIF and four
SDHI interfaces on r8a73a4 (APE6).
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 23 May 2013 03:17:04 +0000 (20:17 -0700)]
sh-pfc: r8a7778: add MMCIF pin groups
Add MMCIF CLK/CMD/DATA groups to R8A7778 PFC driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 23 May 2013 03:16:30 +0000 (20:16 -0700)]
sh-pfc: r8a7778: add HSPI pin groups
Add HSPI CLK/CS/RX/TX pin groups to R8A7778 PFC driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 23 May 2013 03:15:53 +0000 (20:15 -0700)]
sh-pfc: r8a7778: add I2C pin groups
Add I2C SDA/SCL pin groups to R8A7778 PFC driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Wed, 15 May 2013 10:46:54 +0000 (10:46 +0000)]
pinctrl: sh-pfc: fix a typo in pfc-r8a7790
Fix multiple occurrences of the "RESEVED" typo.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Wed, 15 May 2013 10:46:49 +0000 (10:46 +0000)]
pinctrl: sh-pfc: fix r8a7790 Function Select register tables
Fix several errors in Peripheral Function Select register tables for
r8a7790, which prevent various function pins from being correctly
configured.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 14 May 2013 04:10:17 +0000 (21:10 -0700)]
sh-pfc: r8a7778: fixup IRQ1A settings
IP2[31] func2 is IRQ1A, not IRQ3A
Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Wed, 8 May 2013 23:17:33 +0000 (23:17 +0000)]
sh-pfc: r8a7779: add Ether pin groups
Add Ether RMII/LINK/MAGIC pin groups to R8A7779 PFC driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart<laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Wed, 8 May 2013 23:15:50 +0000 (23:15 +0000)]
sh-pfc: r8a7778: add Ether pin groups
Add Ether RMII/LINK/MAGIC pin groups to R8A7778 PFC driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart<laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Vladimir Barinov [Wed, 8 May 2013 23:14:35 +0000 (03:14 +0400)]
sh-pfc: r8a7778: add VIN pin groups
Add VIN DATA[0:8]/CLK/HSYNC/VSYNC pin groups to R8A7778 PFC driver.
While at it, add SH_PFC_MUX8() macro for 8-bit data busses.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
[Sergei: updated the copyrights, added SH_PFC_MUX8() macro for 8-bit data bus,
made use of SH_PFC_*() macros to define the pin groups.]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 23 Apr 2013 23:31:10 +0000 (01:31 +0200)]
sh-pfc: sh73a0: Remove function GPIOs
No sh73a0 platform use the function GPIOs API. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 24 Apr 2013 11:20:17 +0000 (13:20 +0200)]
sh-pfc: r8a7790: Add TPU pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 23 Apr 2013 14:04:07 +0000 (16:04 +0200)]
sh-pfc: r8a7740: Add TPU pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 23 Apr 2013 23:07:16 +0000 (01:07 +0200)]
sh-pfc: sh73a0: Add TPU pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Wed, 8 May 2013 23:12:47 +0000 (23:12 +0000)]
sh-pfc: r8a7778: add USB pin groups
Add USB0/1 PENC/USB_OVC pin groups to R8A7778 PFC driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 21 Apr 2013 21:29:14 +0000 (23:29 +0200)]
ARM: shmobile: kzm9g-reference: Remove the VCCQ MC0 function GPIO
The VCCQ MC0 power gate is now controlled by a regulator registered by
the PFC driver. Remove the corresponding function GPIO.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 21 Apr 2013 21:29:14 +0000 (23:29 +0200)]
ARM: shmobile: kzm9g: Remove the VCCQ MC0 function GPIO
The VCCQ MC0 power gate is now controlled by a regulator registered by
the PFC driver. Remove the corresponding function GPIO.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 21 Apr 2013 21:26:26 +0000 (23:26 +0200)]
sh-pfc: sh73a0: Add VCCQ MC0 regulator
The sh73a0 has an internal power gate on the VCCQ power supply for the
SDHI0 device that is controlled (for some strange reason) by a bit in a
PFC register. This feature should be exposed as a regulator.
As the same register is also used for pin control purposes there is no
way to achieve atomic read/write sequences with a separate regulator
driver. We thus need to implement the regulator here.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 21 Apr 2013 18:21:57 +0000 (20:21 +0200)]
sh-pfc: Add support for SoC-specific initialization
Add two optional init and exit SoC operations and call them from the
core at probe and remove time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 12 Apr 2013 12:21:29 +0000 (14:21 +0200)]
ARM: shmobile: r8a7779 pinmux platform device cleanup
Use DEFINE_RES_MEM() to save a couple of lines of code.
Signed-off-by: Magnus Damm <damm@opensource.se>
[lp: Don't declare r8a7779_pfc_resources as const]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:21 +0000 (11:36 +0200)]
ARM: shmobile: r8a7790: Remove all GPIOs
Function GPIOs are not used anymore, and all code use the GPIO numbers
directly. Remove the GPIOs enumeration.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 8 Apr 2013 09:36:17 +0000 (11:36 +0200)]
ARM: shmobile: r8a7790: Register GPIO devices
Move GPIOs handling from the PFC device to separate GPIO devices.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 18 Apr 2013 06:41:50 +0000 (23:41 -0700)]
ARM: shmobile: r8a7778: add GPIO support
This patch was tested on Bock-W board
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 23 Apr 2013 04:32:32 +0000 (04:32 +0000)]
sh-pfc: r8a7778: tidyup SDHI naming suffixes and sort it alphabetically
SDHI 1/2 are the target
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 23 Apr 2013 11:08:05 +0000 (11:08 +0000)]
sh-pfc: r8a7778: Fix outdated GPIO_FN comments
Function GPIOs have been removed, remove comments that refer to them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 23 Apr 2013 12:24:19 +0000 (14:24 +0200)]
sh-pfc: r8a7740: Add bias (pull-up/down) pinconf support
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 22 Apr 2013 22:30:05 +0000 (00:30 +0200)]
ARM: shmobile: r8a7740: Remove all GPIOs
Function GPIOs are not used anymore, and all code use the GPIO numbers
directly. Remove the GPIOs enumeration.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 22 Apr 2013 22:36:40 +0000 (00:36 +0200)]
sh-pfc: r8a7740: Replace GPIO_PORTx enum with GPIO port numbers
The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Mon, 22 Apr 2013 22:29:23 +0000 (00:29 +0200)]
sh-pfc: r8a7740: Remove function GPIOs
No r8a7740 platform use the function GPIOs API. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove HDMI function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove FSI function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove CEU function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove GETHER function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove BSC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove INTC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:06:57 +0000 (01:06 +0200)]
ARM: shmobile: r8a7740: Remove SCIF function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Bastian Hecht [Wed, 17 Apr 2013 10:34:02 +0000 (10:34 +0000)]
ARM: shmobile: armadillo800eva: Convert SCIFA1 to pinctrl
We use the new pinctrl framework now.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:05:50 +0000 (01:05 +0200)]
sh-pfc: r8a7740: Remove HDMI function GPIOS
All r8a7740 platforms now use the pinctrl API to control the HDMI pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Apr 2013 23:05:50 +0000 (01:05 +0200)]
sh-pfc: r8a7740: Remove FSI function GPIOS
All r8a7740 platforms now use the pinctrl API to control the FSI pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This page took 0.043975 seconds and 5 git commands to generate.