Ganesan Ramalingam [Wed, 6 Mar 2013 14:12:22 +0000 (19:42 +0530)]
Staging: Netlogic XLR/XLS GMAC driver
Add support for the Network Accelerator Engine on Netlogic XLR/XLS
MIPS SoCs. The XLR/XLS NAE blocks can be configured as one 10G
interface or four 1G interfaces. This driver supports blocks
with 1G ports.
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Mon, 11 Mar 2013 13:45:34 +0000 (21:45 +0800)]
staging: sync: fix return value check in sync_fence_alloc()
In case of error, the function anon_inode_getfile() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Mon, 11 Mar 2013 14:22:42 +0000 (22:22 +0800)]
staging: comedi: remove duplicated include from ni_pcimio.c
Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Thu, 7 Mar 2013 14:48:40 +0000 (23:48 +0900)]
staging: comedi: Fix typo in comedi
Correct spelling typos in staging/comedi
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 6 Mar 2013 23:00:38 +0000 (16:00 -0700)]
staging: comedi: adl_pci8164: cleanup multi-line comments
Format the multi-line comments in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 6 Mar 2013 23:00:14 +0000 (16:00 -0700)]
staging: comedi: adl_pci8164: remove unnecessary includes
Remove all the unnecessary includes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 6 Mar 2013 22:59:20 +0000 (15:59 -0700)]
staging: comedi: adl_pci8164: remove PCI_DEVICE_ID_* define
The PCI device id is only used in the device table. Remove the
define and just open code the device id.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 6 Mar 2013 22:58:28 +0000 (15:58 -0700)]
staging: comedi: adl_pci8164: simplify (*insn_{read,write})
The (*insn_read) and (*insn_write) functions for all the subdevices
in this driver are the same except for the 'offset' that is added
to the iobase and channel to read/write a register on the board.
Pass the 'offset' in s->private so we can use the same (*insn_read)
and (*insn->write) functions for all the subdevices.
Also, fix the (*insn_read) and (*insn_write) functions so they work
correctly. The comedi core expects them to read/write insn->n data
values and then return the number of values used.
For aesthetic reasons, add some whitespace to the subdevice init.
Remove the dev_info() noise at the end of the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 6 Mar 2013 22:57:51 +0000 (15:57 -0700)]
staging: comedi: adl_pci8164: simplify axis register determination
The low-level i/o functions in this driver simply read/write a
register based on the channel in insn->chanspec and an offset.
Create a macro, PCI8164_AXIS(), that takes the channel number as
a parameter and returns the register value.
Remove the switch() statements used to figure out the 'axis_reg'
and use the new macro instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 6 Mar 2013 22:57:24 +0000 (15:57 -0700)]
staging: comedi: adl_pci8164: remove buggy dev_dbg()
The dev_dbg() messages in the adl_pci8164_insn_{read,out} functions
output the 'data' that was read/write to the device. Two 'data' values
are always printed, data[0] and data[1].
The 'data' pointer points to an array of unsigned int values. The number
of values in the array is indicated by insn->n. The number of data
elements is never checked so the dev_dbg() could be trying to access
a 'data' element that is invalid.
Instead of fixing the dev_dbg() just remove them. They are really just
added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:27:07 +0000 (10:27 -0700)]
staging: comedi: das08: remove 'id' from boardinfo
With the bus specific code split out, the device id in the boardinfo
is no longer needed. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:26:44 +0000 (10:26 -0700)]
staging: comedi: addi_common: remove 'i_VendorId' and 'i_Device Id'
The vendor/device ids in the boardinfo are not longer needed. Remove
them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:26:23 +0000 (10:26 -0700)]
staging: comedi: addi_apci_1710: remove boardinfo
This driver only uses the boardinfo to get the dev->board_name.
Just use the dev->driver->driver_name and remove the unnecessary
boardinfo completely.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:26:02 +0000 (10:26 -0700)]
staging: comedi: addi_apci_1710: remove 'interrupt' from boardinfo
Only one board type is supported by this driver. Remove the 'interrupt'
field from the boardinfo and just call the function directly in
v_ADDI_Interrupt().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:25:32 +0000 (10:25 -0700)]
staging: comedi: addi_common: remove addi_find_boardinfo()
All the users of the addi_common code now set the dev->board_ptr
before calling addi_auto_attach(). Remove the unnecessary function
that searches for the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:25:04 +0000 (10:25 -0700)]
staging: comedi: addi_apci_3xxx: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE()
to PCI_VDEVICE(). This allows passing the enum as the next field.
Set the dev->board_ptr before calling addi_auto_attach(). This
removes the need for the common code to search for the boardinfo.
Since the search is not done we can remove the unnecessary board
information from the comedi_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:24:43 +0000 (10:24 -0700)]
staging: comedi: addi_apci_3200: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE()
to PCI_VDEVICE(). This allows passing the enum as the next field.
Set the dev->board_ptr before calling addi_auto_attach(). This
removes the need for the common code to search for the boardinfo.
Since the search is not done we can remove the unnecessary board
information from the comedi_driver.
For aesthetic reasons, move the pci device table near the pci_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:24:21 +0000 (10:24 -0700)]
staging: comedi: addi_apci_1564: set board_ptr before calling addi_auto_attach()
This driver only supports a single PCI device. If we set the
dev->board_ptr before calling addi_auto_attach() we remove
the need for the common code to search for the boardinfo.
Since the search is not done we can remove the unnecessary
board information from the comedi_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:24:00 +0000 (10:24 -0700)]
staging: comedi: addi_apci_1500: set board_ptr before calling addi_auto_attach()
This driver only supports a single PCI device. If we set the
dev->board_ptr before calling addi_auto_attach() we remove
the need for the common code to search for the boardinfo.
Since the search is not done we can remove the unnecessary
board information from the comedi_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:23:30 +0000 (10:23 -0700)]
staging: comedi: addi_apci_035: set board_ptr before calling addi_auto_attach()
This driver only supports a single PCI device. If we set the
dev->board_ptr before calling addi_auto_attach() we remove
the need for the common code to search for the boardinfo.
Since the search is not done we can remove the unnecessary
board information from the comedi_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:23:10 +0000 (10:23 -0700)]
staging: comedi: addi_common: allow driver to set the board_ptr
The addi_apci_035, addi_apci_1500, addi_apci_1564, and addi_apci_3xxx
drivers still use the addi_common code. Allow those drivers to set
the dev->board_ptr before calling addi_auto_attach().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:22:48 +0000 (10:22 -0700)]
staging: comedi: skel: cleanup the boardinfo
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:22:31 +0000 (10:22 -0700)]
staging: comedi: skel: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE()
to PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'devid' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI
device.
Cleanup some of the comments to describe the usage of the 'context'
in the (*auto_attach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:22:06 +0000 (10:22 -0700)]
staging: comedi: skel: cleanup pci_driver declaration
For aesthetic reasons, add some whitespace to the pci_driver
declaration.
Also, move the pci device table near the pci_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:21:47 +0000 (10:21 -0700)]
staging: comedi: rtd520: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:21:24 +0000 (10:21 -0700)]
staging: comedi: ni_pcimio: cleanup the boardinfo
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:21:03 +0000 (10:21 -0700)]
staging: comedi: ni_stc.h: remove n_ni_boards macro
This macro is not used, remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:20:41 +0000 (10:20 -0700)]
staging: comedi: ni_stc.h: remove boardtype macro
This macro relies on a local variable having a specific name and
returns an object that variable points to. This object is the
boardinfo used by the driver.
The comedi core provides the comedi_board() helper to return a
const pointer to the boardinfo. Remove the 'boardtype' macro and
fix all the users of the 'boardtype' macro to use the comedi_board()
helper to get the const boardinfo pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:20:06 +0000 (10:20 -0700)]
staging: comedi: ni_pcimio: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data. A couple of the entries in the boardinfo
are #if 0'ed out due to unknown device ids. Add the enums for them
also but comment them out.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Remove the dev_info function trace noise in the attach.
Use the boardinfo 'board' pointer instead of accessing the data directly
with the 'boardtype' macro in the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:19:36 +0000 (10:19 -0700)]
staging: comedi: ni_pcidio: remove this_board macro
This macro relies on a local variable having a specific name and
derives a pointer from that local variable.
It's only used in the attach and we already have the local variable
'board' that has the same information. Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:18:04 +0000 (10:18 -0700)]
staging: comedi: ni_pcidio: remove n_ndio_boards macro
This macro is not used in the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:17:31 +0000 (10:17 -0700)]
staging: comedi: ni_pcidio: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:17:07 +0000 (10:17 -0700)]
staging: comedi: ni_670x: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:16:42 +0000 (10:16 -0700)]
staging: comedi: ni_660x: cleanup the boardinfo
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:16:16 +0000 (10:16 -0700)]
staging: comedi: ni_660x: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:15:40 +0000 (10:15 -0700)]
staging: comedi: ni_65xx: cleanup the boardinfo
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:15:15 +0000 (10:15 -0700)]
staging: comedi: ni_65xx: remove n_ni_65xx_boards macro
This macro is not used in the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:05:20 +0000 (10:05 -0700)]
staging: comedi: ni_65xx: remove board() helper function
This local helper function is a duplicate of the comedi core
privided comedi_board() helper. Use that function instead and
use a local variable to hold the boardinfo pointer instead of
calling the helper each time the boardinfo is accessed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:04:52 +0000 (10:04 -0700)]
staging: comedi: ni_65xx: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since we now have a local variable in the attach that has the boardinfo
pointer, use that instead of calling the local board() helper function
each time the boardinfo is accessed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:04:22 +0000 (10:04 -0700)]
staging: comedi: ni_65xx: cleanup pci_driver declaration
For aesthetic reasons, add some whitespace to the pci_driver
declaration.
Also, move the pci device table near the pci_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:03:55 +0000 (10:03 -0700)]
staging: comedi: ni_6527: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
For aesthetic reasons, add some whitespace to the boardinfo.
Remove the now unnecessary 'this_board' macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:03:34 +0000 (10:03 -0700)]
staging: comedi: ni_6527: cleanup pci_driver declaration
For aesthetic reasons, add some whitespace to the pci_driver
declaration.
Also, move the pci device table near the pci_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:03:09 +0000 (10:03 -0700)]
staging: comedi: me_daq: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
The me-2600i needs to have firmware uploaded to the board. Add a new
field to the boardinfo, 'needs_firmware', to indicate this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:02:47 +0000 (10:02 -0700)]
staging: comedi: me4000: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:01:59 +0000 (10:01 -0700)]
staging: comedi: dt3000: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:01:28 +0000 (10:01 -0700)]
staging: comedi: cb_pcidda: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:00:59 +0000 (10:00 -0700)]
staging: comedi: cb_pcidas64: cleanup the boardinfo
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:00:39 +0000 (10:00 -0700)]
staging: comedi: cb_pcidas64: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well
the search function that was used to locate the boardinfo for the PCI
device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 17:00:15 +0000 (10:00 -0700)]
staging: comedi: cb_pcidas: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well
the search function that was used to locate the boardinfo for the PCI
device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 16:59:52 +0000 (09:59 -0700)]
staging: comedi: adv_pci_dio: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'vendor_id' and 'device_id' data from the
boardinfo as well the search function that was used to locate the
boardinfo for the PCI device.
The pci1753 and pci1753e boards have the same vendor/device id so it
is impossible to determine which board is actually detected. The
boardinfo for the boards is quite different. Group them in the same
enum index in the boardinfo table and #if out the information with
USE_PCI1753E_BOARDINFO. Until a better solution is worked out, this
will allow the driver to be compiled to support the pci1753 (default)
or pci1752e.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 16:59:29 +0000 (09:59 -0700)]
staging: comedi: adv_pci1710: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well
the search function that was used to locate the boardinfo for the
PCI device.
The pci1710 and pci1710hg boards have the same vendor/device id so
it is impossible to determine which board is actually detected. The
boardinfo for the pci1710hg is identical to the pci1710 other than
the analog input range information. Remove the pci1710hg information
and #if out the range tables for that device with the define
USE_PCI1710HG_RANGE. Modify the pci1710 boardinfo accordingly to
use the same define to determine which range table to use. Until a
better solution is worked out, this will allow the driver to be
compiled to support the pci1710 (default) or pci1710hg.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 16:59:07 +0000 (09:59 -0700)]
staging: comedi: adl_pci7x3x: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 16:58:25 +0000 (09:58 -0700)]
staging: comedi: adl_pci6208: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 16:58:01 +0000 (09:58 -0700)]
staging: comedi: addi_apci_3120: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'i_VendorId' and 'i_DeviceId' data from the
boardinfo as well the search function that was used to locate the
boardinfo for the PCI device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 16:57:26 +0000 (09:57 -0700)]
staging: comedi: addi_apci_16xx: remove the boardinfo from the comedi_driver
This driver uses the comedi auto attach mechanism and does not need
to supply the 'num_names', 'board_name', and 'offset' fields so that
the comedi core can search the boardinfo. These fields are only used
for the legacy attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 16:56:51 +0000 (09:56 -0700)]
staging: comedi: addi_apci_16xx: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'vendor' and 'device' data from the boardinfo
as well the search function that was used to locate the boardinfo for
the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 16:56:06 +0000 (09:56 -0700)]
staging: comedi: addi_apci_1516: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 16:54:58 +0000 (09:54 -0700)]
staging: comedi: 8255_pci: use the pci id_table 'driver_data'
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'vendor' and 'device' data from the boardinfo
as well the search function that was used to locate the boardinfo for
the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 5 Mar 2013 16:53:41 +0000 (09:53 -0700)]
staging: comedi: comedi_pci: change the comedi_pci_auto_config() 'context'
The comedi_pci_auto_config() function is used to allow the PCI driver
(*probe) function to automatically call the comedi driver (*auto_attach).
This allows the comedi driver to be part of the PnP process when the
PCI device is detected.
Currently the comedi_pci_auto_config() always passes a 'context' of '0'
to comedi_auto_config(). This makes the 'context' a bit useless.
Modify comedi_pci_auto_config() to allow the comedi pci drivers to pass
a 'context' from the PCI driver.
Make all the comedi pci drivers pass the pci_device_id 'driver_data' as
the 'context'. Since none of the comedi pci drivers currently set the
'driver_data' the 'context' will still be '0'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changlong Xie [Tue, 5 Mar 2013 05:39:39 +0000 (13:39 +0800)]
staging: sw_sync: sw_sync_timeline_ops can be static
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Changlong Xie <changlongx.xie@intel.com>
Acked-by: Erik Gilling <konkers@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen Gang [Fri, 8 Mar 2013 00:47:50 +0000 (08:47 +0800)]
staging: zcache: using strlcpy instead of strncpy
for NUL terminated string, need alway set '\0' in the end.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SeongJae Park [Sat, 2 Mar 2013 01:45:17 +0000 (10:45 +0900)]
staging: csr: csr_time.c: Fix coding style
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Thu, 28 Feb 2013 19:46:57 +0000 (11:46 -0800)]
staging: dgrp: Drop unnecessary typecast
An unnecessary typecast in dgrp_net_ops.c causes the following build error
if compiled with W=1.
In function ‘copy_from_user’, inlined from ‘dgrp_net_ioctl’ at
drivers/staging/dgrp/dgrp_net_ops.c:3408:21:
arch/x86/include/asm/uaccess_32.h:211:26: error: call to
‘copy_from_user_overflow’ declared with attribute error: copy_from_user()
buffer size is not provably correct
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niklas Söderlund [Wed, 27 Feb 2013 19:40:06 +0000 (20:40 +0100)]
rtl8712: remove redundant if statement
Same result no matter what path is taken.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niklas Söderlund [Thu, 28 Feb 2013 19:04:03 +0000 (20:04 +0100)]
rtl8712: remove unused definitions from rtl871x_recv.h
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niklas Söderlund [Thu, 28 Feb 2013 19:04:02 +0000 (20:04 +0100)]
rtl8712: remove dead function prototypes from rtl871x_recv.h
There is no implementation of these functions anywhere in the code.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niklas Söderlund [Thu, 28 Feb 2013 19:04:01 +0000 (20:04 +0100)]
rtl8712: remove unused functions from rtl871x_recv.h
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:38 +0000 (18:53 -0400)]
staging: omap-thermal: update clock prepare count
This patch changes the clock management code to also update
the clock prepare counter, this way we won't skip the enable/disable
operation due to prepare dependencies.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:37 +0000 (18:53 -0400)]
staging: omap-thermal: name data files accordingly
This patch simply changes the name of files containing data structure definition.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:36 +0000 (18:53 -0400)]
staging: omap-thermal: Remove double conv_table reference
This patch removes from data structure the double reference of
the conversion table. It keeps the reference coming from bandgap
data definition. The patch also adapts the code accordingly.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:35 +0000 (18:53 -0400)]
staging: omap-thermal: add DT example for OMAP54xx devices
Update documentation with DT example for OMAP54xx devices.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:34 +0000 (18:53 -0400)]
staging: omap-thermal: update DT entry documentation
Simple update on documentation file for DT. This patch
also adds an example for OMAP4430 and 0MAP4470, and also updated
OMAP4460's example.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:33 +0000 (18:53 -0400)]
staging: omap-thermal: introduze FREEZE_BIT feature
For ES2.0 devices, it is not guaranteed that current DTEMP
or DTEMP0 from the history buffer are going to contain
correct values, due to desynchronization between BG clk
and OCP clk.
For this reason, this patch changes the driver to first:
a. consider a feature flag, FREEZE_BIT, in order to check
it is possible to freeze the history buffer or not.
b. whenever reading the temperature, it will fetch from
DTEMP1 instead of DTEMP or DTEMP0.
This WA is applicable only for OMAP5430 ES2.0.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:32 +0000 (18:53 -0400)]
staging: omap-thermal: remove dedicated counter register for OMAP5
On OMAP54xx there is only one counter register. For this reason,
each domain must use the same counter register. This patch changes
the data definition to coupe with this.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:31 +0000 (18:53 -0400)]
staging: omap-thermal: update feature bitfield for OMAP54xx
This patch removes from OMAP54xx the features:
. CLK_CTRL
. COUNTER
. MODE_CONFIG
Because these features are not present in OMAP54xx ES2.0
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:30 +0000 (18:53 -0400)]
staging: omap-thermal: update OMAP54xx clock sources
This patch updates the OMAP54xx data structure to use
the right clock source name for ES2.0.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:29 +0000 (18:53 -0400)]
staging: omap-thermal: introduce new features of OMAP54xx
On OMAP54xx ES2.0 there are new features inside the bandgap
device. This patch introduces the registers definition
to access these features and adapts the data structures
to map these new registers. The new features are:
. SIDLE mode
. Cumulative register
. History buffer.
. Buffer freeze bit
. Buffer clear bit
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:28 +0000 (18:53 -0400)]
staging: omap-thermal: remove from register map soc and mode on OMAP5
On OMAP54xx ES2.0 there is no single read and only one mode: continuous
mode. For this reason, there is no point in defining register fields
for these operations.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 26 Feb 2013 22:53:27 +0000 (18:53 -0400)]
staging: omap-thermal: standardize register nomenclature to use 'GPU'
In order to keep same nomenclature across the register definition,
this change will make all 'MM' suffixes to be named 'GPU'.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Radhesh Fadnis [Tue, 26 Feb 2013 22:53:26 +0000 (18:53 -0400)]
staging: omap-thermal: update OMAP54xx conv_table
This patch updates the ADC conversion table for OMAP5430 ES2.0 devices.
Signed-off-by: Radhesh Fadnis <radhesh.fadnis@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Radhesh Fadnis [Tue, 26 Feb 2013 22:53:25 +0000 (18:53 -0400)]
staging: omap-thermal: introduce clock feature flag
The clock to Bandgap module is SW controlled on some version of
OMAP silicon (OMAP44xx). But on OMAP54xx ES2.0
onwards this is HW-Auto controlled. Hence introduce a feature flag
to use/not-to-use SW enable/disable of BG clock.
Signed-off-by: Radhesh Fadnis <radhesh.fadnis@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ruslan Ruslichenko [Tue, 26 Feb 2013 22:53:24 +0000 (18:53 -0400)]
staging: omap-thermal: Add print when TSHUT temperature reached
To indicate that board was shut down due to TSHUT temperature reached
it is good to print some information message before shutting down.
Signed-off-by: Ruslan Ruslichenko <x0191366@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 27 Feb 2013 05:13:45 +0000 (08:13 +0300)]
wlan-ng: add a bounds check
I'm not sure where these results come from, but it can't hurt to
add a sanity check the array offset. The .results[] array on the
next line has HFA384x_CHINFORESULT_MAX (16) elements.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 27 Feb 2013 05:12:06 +0000 (08:12 +0300)]
wlan-ng: clean up prism2sta_inf_chinforesults()
This function is ugly because it hits against the 80 character
limit. This patch does several things to clean it up.
1) Introduces "result" instead of inf->info.chinforesult.result[n].
2) Reverses the ".scanchannels & (1 << i)" so everthing can be
pulled in one indent level.
3) Use "chan" instead of "channel".
4) Tweaks the line breaks to the call to pr_debug().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laurent Navet [Mon, 25 Feb 2013 13:08:49 +0000 (14:08 +0100)]
staging: line6: pod.c: fix checkpatch warning
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Fri, 22 Feb 2013 11:13:34 +0000 (12:13 +0100)]
staging: usbip: removed lines over 80 characters
This patch fixes the following checkpatch warning:
-WARNING: line over 80 characters
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Reif [Fri, 22 Feb 2013 11:13:33 +0000 (12:13 +0100)]
staging: usbip: userspace: fix whitespace errors
This patch fixes the following checkpatch errors:
-ERROR: space required after that ','
-ERROR: spaces required around that '='
-ERROR: space prohibited before that close parenthesis
-WARNING: please, no space before tabs
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Reif [Fri, 22 Feb 2013 11:13:32 +0000 (12:13 +0100)]
staging: usbip: remove unnecessary braces
This patch fixes the following checkpatch warning:
-WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Fri, 22 Feb 2013 11:13:31 +0000 (12:13 +0100)]
staging: usbip: userspace: libsrc: added missing space
This patch fixes the following checkpatch warning:
-WARNING: missing space after enum definition
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Fri, 22 Feb 2013 11:13:30 +0000 (12:13 +0100)]
staging: usbip: userspace: libsrc: removed assignments in if conditions
This patch fixes the following checkpatch error:
-ERROR: do not use assignment in if condition
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Fri, 22 Feb 2013 11:13:29 +0000 (12:13 +0100)]
staging: usbip: userspace: libsrc: replaced lines over 80 characters
This patch fixes some of the following checkpatch warnings:
-WARNING: line over 80 characters
We did not split format strings for readability.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Fri, 22 Feb 2013 11:13:28 +0000 (12:13 +0100)]
staging: usbip: userspace: libsrc: (foo*) should be (foo *)
This patch fixes the following checkpatch error:
-ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Fri, 22 Feb 2013 11:13:27 +0000 (12:13 +0100)]
staging: usbip: userspace: libsrc: spaces required around that '='
This patch fixes the following checkpatch error:
-ERROR: spaces required around that '='
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Fri, 22 Feb 2013 11:13:26 +0000 (12:13 +0100)]
staging: usbip: userspace: libsrc: do not init static/globals to 0
This patch fixes the following checkpatch errors:
-ERROR: do not initialise statics to 0 or NULL
-ERROR: do not initialise globals to 0 or NULL
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Fri, 22 Feb 2013 11:13:25 +0000 (12:13 +0100)]
staging: usbip: userspace: libsrc: fix indention
This patch fixes the following checkpatch warning:
-ERROR: code indent should use tabs where possible
-WARNING: suspect code indent for conditional statements
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syam Sidhardhan [Wed, 6 Mar 2013 20:14:54 +0000 (01:44 +0530)]
staging: silicom: Remove redundant NULL check before kfree
kfree on NULL pointer is a no-op.
Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandru Gheorghiu [Tue, 26 Feb 2013 14:53:16 +0000 (16:53 +0200)]
Staging: silicom: bp_mod: Removed trailing whitespaces
Fixed coding style issue.
Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Thu, 21 Feb 2013 02:32:28 +0000 (18:32 -0800)]
staging: fix all sparse warnings in silicom/bypasslib/
Fix all sparse warning in drivers/staging/silicom/bypasslib/,
e.g.:
drivers/staging/silicom/bypasslib/bypass.c:471:21: warning: non-ANSI function declaration of function 'init_lib_module'
drivers/staging/silicom/bypasslib/bypass.c:478:25: warning: non-ANSI function declaration of function 'cleanup_lib_module'
drivers/staging/silicom/bypasslib/bypass.c:137:5: warning: symbol 'is_bypass_dev' was not declared. Should it be static?
drivers/staging/silicom/bypasslib/bypass.c:182:5: warning: symbol 'is_bypass' was not declared. Should it be static?
drivers/staging/silicom/bypasslib/bypass.c:192:5: warning: symbol 'get_bypass_slave' was not declared. Should it be static?
drivers/staging/silicom/bypasslib/bypass.c:197:5: warning: symbol 'get_bypass_caps' was not declared. Should it be static?
drivers/staging/silicom/bypasslib/bypass.c:202:5: warning: symbol 'get_wd_set_caps' was not declared. Should it be static?
etc.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Huewe [Tue, 19 Feb 2013 17:50:20 +0000 (18:50 +0100)]
staging/gdm72xx: Remove duplicated code in gdm_qos.c
The first branch of the if statement is ended with a return thus there
is no need for an else if, and thus we can move the duplicated code to
the top and use it for the other two branches.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Huewe [Tue, 19 Feb 2013 17:50:19 +0000 (18:50 +0100)]
staging/gdm72xx: Remove unused variable in gdm_qos.c
len is never read after assignment, thus can be removed.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.046193 seconds and 5 git commands to generate.