Nick Clifton [Wed, 20 Aug 1997 20:57:05 +0000 (20:57 +0000)]
Fixed interpretation of SR bit in list18 structures.
Ian Lance Taylor [Wed, 20 Aug 1997 15:24:15 +0000 (15:24 +0000)]
* ldlang.c (wildcardp): Don't let a backslash by itself cause a
pattern to be treated as a wildcard pattern.
PR 13113.
Ian Lance Taylor [Wed, 20 Aug 1997 15:15:22 +0000 (15:15 +0000)]
* ldgram.y (atype): Accept parentheses with no type.
* ld.texinfo (Section Definition): Clarify use of whitespace.
(Section Placement): Likewise.
PR 13112.
Nick Clifton [Tue, 19 Aug 1997 17:07:05 +0000 (17:07 +0000)]
oops - fixed bugs in new v850e/q rules.
Fred Fish [Tue, 19 Aug 1997 16:46:03 +0000 (16:46 +0000)]
Tue Aug 19 08:59:12 1997 Fred Fish <fnf@cygnus.com>
* read.c (s_lcomm_internal): Renamed from s_lcomm, added arg to
flag when alignment is in bytes instead of power of 2, and code to
use that flag to convert alignment to bytes.
(s_lcomm, s_lcomm_bytes): New helpers that call s_lcomm_internal.
* read.h (s_lcomm_bytes): Add prototype.
* config/obj-coff.c (write_object_file): If ALIGNMENT_IN_S_FLAGS is
defined, write alignment to alignment bits in section header s_flags
rather than the s_align field.
start-sanitize-tic80
* config/obj-coff.h (ALIGNMENT_IN_S_FLAGS): Define for TC_TIC80.
* config/tc-tic80.c (md_pseudo_table): Use s_lcomm_bytes for bss
pseudo, instead of s_lcomm which wants a power of two for alignment.
end-sanitize-tic80
PR 12215 and PR 13061
Fred Fish [Tue, 19 Aug 1997 16:44:00 +0000 (16:44 +0000)]
* coff-i960.c (COFF_ALIGN_IN_SECTION_HEADER): Define to 1.
(GET_SCNHDR_ALIGN, PUT_SCNHDR_ALIGN): Define.
* coff-m88k.c (GET_SCNHDR_NRELOC, GET_SCNHDR_NLNNO): Define.
* coffcode.h (coff_set_alignment_hook): Conditionally compile in if
COFF_ALIGN_IN_SECTION_HEADER is defined. Convert alignment to power
of two for I960 only.
* coffswap.h (GET_SCNHDR_NRELOC, PUT_SCNHDR_NRELOC, GET_SCNDHR_NLNNO,
PUT_SCNHDR_NLNNO, GET_SCNHDR_FLAGS, PUT_SCNHDR_FLAGS): Provide
default definitions.
(coff_swap_scnhdr_in): Use GET_SCNHDR_FLAGS, GET_SCNHDR_NRELOC,
GET_SCNHDR_NLNNO, and GET_SCNHDR_ALIGN.
(coff_swap_scnhdr_out): Use PUT_SCNHDR_FLAGS, PUT_SCNHDR_ALIGN.
start-sanitize-tic80
* Makefile.in (coff-tic80.o): Depends upon coffswap.h.
* coff-tic80.c (COFF_ALIGN_IN_SECTION_HEADER): Define to 1.
(GET_SCNHDR_FLAGS, PUT_SCNHDR_FLAGS): Define
*coffcode.h (coff_write_object_contents): Set alignment field in
section header for TIC80COFF files.
end-sanitize-tic80
PR 12215 and PR 13061
Fred Fish [Tue, 19 Aug 1997 15:46:20 +0000 (15:46 +0000)]
* objfiles.c (objfile_relocate): Add call to breakpoint_re_set
after relocations are complete.
* remote-vx.c (vx_add_symbols): Remove call to breakpoint_re_set,
this is now done in objfile_relocate.
PR 11308
Richard Henderson [Tue, 19 Aug 1997 03:48:22 +0000 (03:48 +0000)]
* macro.c (check_macro): use alloca instead of xmalloc to plug leak.
Richard Henderson [Tue, 19 Aug 1997 03:45:56 +0000 (03:45 +0000)]
* as.c (show_usage): Add -am.
* input-scrub.c (input_scrub_include_sb): Don't add leading \n
if we've already got one.
* listing.c (struct list_info_struct): Add line_contents.
(listing_newline): Put unused argument to work: if non-null, save it...
(listing_listing): ... and regurgitate during listing instead of line
from file.
* listing.h (LISTING_MACEXP): New define.
(LISTING_NEWLINE): Argument is NULL.
* read.c (read_a_source_file): If expanding macros, break up input
lines and pass them to listing_newline.
* doc/as.texinfo: Document -ac and -am.
* cond.c (s_ifc): Add missing demand_empty_rest_of_line.
Ian Lance Taylor [Mon, 18 Aug 1997 21:31:51 +0000 (21:31 +0000)]
* win32-nat.c (handle_exception): Return a value indicating
whether the exception was handled. Don't handle random exceptions
the first time around, so that structured exception handling
works.
(child_wait): Check the return value of handle_exception. Set the
continue_status argument to ContinueDebugEvent accordingly.
Nick Clifton [Mon, 18 Aug 1997 18:42:35 +0000 (18:42 +0000)]
Add support for v850e and v850eq targets.
Add support for BFD_RELOC_V850_PCREL relocation.
Nick Clifton [Mon, 18 Aug 1997 18:30:31 +0000 (18:30 +0000)]
Add support for v850e and v850eq target.
Nick Clifton [Mon, 18 Aug 1997 18:26:42 +0000 (18:26 +0000)]
Add support for v850e and v850eq targets.
Add support for BFD_RELOC_V850_16_PCREL.
Nick Clifton [Mon, 18 Aug 1997 18:12:54 +0000 (18:12 +0000)]
Add support for v850e and v850eq targets.
Nick Clifton [Mon, 18 Aug 1997 18:01:42 +0000 (18:01 +0000)]
Add suport for v850e and v850eq
Nick Clifton [Mon, 18 Aug 1997 18:01:08 +0000 (18:01 +0000)]
Add support for V850eq variant opcodes.
Mark Alexander [Mon, 18 Aug 1997 17:02:58 +0000 (17:02 +0000)]
* Add gdbtcl2 to gdbtk_files.
Gavin Romig-Koch [Mon, 18 Aug 1997 13:27:25 +0000 (13:27 +0000)]
* config.sub: Add mipstx39. Delete r3900.
Jason Molenda [Mon, 18 Aug 1997 10:14:26 +0000 (10:14 +0000)]
* Makefile.in (all-vmake): Depends on all-tix.
Jason Molenda [Mon, 18 Aug 1997 08:26:07 +0000 (08:26 +0000)]
* Makefile.in (all-autoconf): Depends on all-texinfo.
autoconf tries to run makeinfo as a part of 'all'. Instead of hacking
autoconf to build in the Cygnus way, I just added this dependency.
Michael Snyder [Mon, 18 Aug 1997 03:33:27 +0000 (03:33 +0000)]
Sun Aug 17 20:31:57 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
* m32r-stub.c: fix typo
Stan Shebs [Mon, 18 Aug 1997 00:41:39 +0000 (00:41 +0000)]
* remote-sds.c: Remove unused remnants of remote.c.
(tob64): Return the result length.
(sds_interrupt): Send a stop message.
(sds_wait): Add debug output for signal interpretation, flag
that signal was due to a trap.
(sds_fetch_registers): Fill the registers array correctly for
PowerPC.
(sds_store_registers): Get the right values from registers array.
(putmessage): Tweak length handling so checksum comes out right.
(sds_insert_breakpoint, sds_remove_breakpoint): Do correctly.
Martin Hunt [Sun, 17 Aug 1997 07:47:55 +0000 (07:47 +0000)]
Sun Aug 17 00:42:11 1997 Martin M. Hunt <hunt@cygnus.com>
* gdbtk.c (gdb_listfuncs): New function that returns
a list of all the functions in a source file.
Michael Meissner [Sat, 16 Aug 1997 03:11:09 +0000 (03:11 +0000)]
Update powerpc/rs6000 to current multilibs
Ian Lance Taylor [Fri, 15 Aug 1997 23:19:20 +0000 (23:19 +0000)]
* Makefile.am (check-DEJAGNU): Don't cd into testsuite until after
setting EXPECT and TCL_LIBRARY.
* Makefile.in: Rebuild.
Peter Schauer [Fri, 15 Aug 1997 21:10:32 +0000 (21:10 +0000)]
* infrun.c (wait_for_inferior): Add the symbols for any
newly loaded objects upon a TARGET_WAITKIND_LOADED event.
Rewrite code which determines the TOC address for calling functions
in the inferior under AIX.
* rs6000-nat.c (find_toc_address): New function to determine
the required TOC address from a function address.
(_initialize_core_rs6000): Set up find_toc_address_hook to point
to find_toc_address.
(xcoff_relocate_symtab, xcoff_relocate_core): Remove
add_text_to_loadinfo calls.
(exec_one_dummy_insn): Change pid and status to int to get rid of
compiler warnings.
(xcoff_relocate_symtab): Cast ldi to `int *' when passing it to
ptrace to get rid of compiler warnings.
* rs6000-tdep.c: Add definition for find_toc_address_hook.
(rs6000_fix_call_dummy): If find_toc_address_hook is non zero,
patch TOC address load code in the call dummy with the value
returned from find_toc_address_hook.
(struct loadinfo, loadinfo, loadinfolen,
loadinfotextindex, xcoff_init_loadinfo, free_loadinfo,
xcoff_add_toc_to_loadinfo, add_text_to_loadinfo, find_toc_address):
Remove.
(_initialize_rs6000_tdep): Remove initialization of
coff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
* xcoffread.c (coff_add_toc_to_loadinfo_hook,
xcoff_init_loadinfo_hook): Remove.
(struct coff_symfile_info): Add toc_offset field.
(scan_xcoff_symtab): Record toc_offset value in toc_offset field
instead of calling xcoff_add_toc_to_loadinfo_hook.
(get_toc_offset): New function to return the value of the
toc_offset field for an object file.
(xcoff_initial_scan): Remove call of xcoff_init_loadinfo_hook.
* xcoffsolib.h (add_text_to_loadinfo): Remove declaration.
* config/rs6000/tm-rs6000.h: Add declarations for
find_toc_address_hook and get_toc_offset.
Ian Lance Taylor [Fri, 15 Aug 1997 18:26:52 +0000 (18:26 +0000)]
fix copyrights
Ian Lance Taylor [Fri, 15 Aug 1997 18:19:27 +0000 (18:19 +0000)]
* as.h (enum debug_info_type): Define.
(debug_type): Declare.
* as.c (debug_type): New global variable.
(show_usage): Add --gstabs.
(parse_args): Handle --gstabs.
* read.c (generate_asm_lineno): Remove.
(read_a_source_file): Output stabs debugging if appropriate.
Change checks of generate_asm_lineno to check debug_type. Only
generate ECOFF debugging if ECOFF_DEBUGGING is defined.
* read.h (generate_asm_lineno): Don't declare.
(stabs_generate_asm_lineno): Declare.
* stabs.c (stabs_generate_asm_lineno): New function.
* ecoff.c (add_file): Use debug_type, not generate_asm_lineno.
Don't turn off debugging.
(add_file): Remove old #if 0 code.
(ecoff_new_file): Set debug_type, not generate_asm_lineno.
(ecoff_directive_end): Don't generate stabs line symbols.
(ecoff_generate_asm_lineno): Don't check stabs_seen. Don't set
generate_asm_lineno.
(line_label_cnt): Remove.
(ecoff_generate_asm_line_stab): Remove.
* ecoff.h (ecoff_generate_asm_line_stab): Don't declare.
* doc/as.texinfo, doc/as.1: Document --gstabs.
Ian Lance Taylor [Fri, 15 Aug 1997 16:02:53 +0000 (16:02 +0000)]
* coffgen.c (coff_find_nearest_line): Correctly handle the offset
argument as section relative, rather than an absolute address.
From Jan Hoogenraad <hoogenrd@natlab.research.philips.com>.
Ian Lance Taylor [Fri, 15 Aug 1997 15:50:13 +0000 (15:50 +0000)]
fix v850 sanitization
Ian Lance Taylor [Fri, 15 Aug 1997 15:44:07 +0000 (15:44 +0000)]
fix v850 sanitization
David Edelsohn [Fri, 15 Aug 1997 12:20:57 +0000 (12:20 +0000)]
Remove ARC sanitization.
David Edelsohn [Fri, 15 Aug 1997 12:10:43 +0000 (12:10 +0000)]
* arc.h (enum reloc): Move here from elf32-arc.c.
David Edelsohn [Fri, 15 Aug 1997 12:08:52 +0000 (12:08 +0000)]
Remove ARC sanitization.
David Edelsohn [Fri, 15 Aug 1997 06:58:48 +0000 (06:58 +0000)]
Remove support for insns not in base chip, which is all we support now.
David Edelsohn [Fri, 15 Aug 1997 06:53:50 +0000 (06:53 +0000)]
Delete testcases, these don't appear in the base chip which is all we
support now.
David Edelsohn [Fri, 15 Aug 1997 06:49:09 +0000 (06:49 +0000)]
Remove ARC sanitization.
David Edelsohn [Thu, 14 Aug 1997 20:36:00 +0000 (20:36 +0000)]
Add comment.
David Edelsohn [Thu, 14 Aug 1997 20:07:56 +0000 (20:07 +0000)]
Undo last change, add comment saying why I think I was wrong.
David Edelsohn [Thu, 14 Aug 1997 19:55:37 +0000 (19:55 +0000)]
* callback.h (cb_printf, cb_eprintf): Declare.
Nick Clifton [Thu, 14 Aug 1997 19:55:03 +0000 (19:55 +0000)]
Fixed typo in previous delta and added more sanitization.
David Edelsohn [Thu, 14 Aug 1997 19:53:10 +0000 (19:53 +0000)]
* callback.c (os_poll_quit): Make static.
Call sim_cb_eprintf, not p->eprintf.
(sim_cb_printf, sim_cb_eprintf): New functions.
Nick Clifton [Thu, 14 Aug 1997 19:48:36 +0000 (19:48 +0000)]
oops - fixed typo.
Nick Clifton [Thu, 14 Aug 1997 19:45:14 +0000 (19:45 +0000)]
Tidied up sanitization.
Ian Lance Taylor [Thu, 14 Aug 1997 19:43:00 +0000 (19:43 +0000)]
* configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
Nick Clifton [Thu, 14 Aug 1997 19:42:22 +0000 (19:42 +0000)]
Tidied up sanitization
Nick Clifton [Thu, 14 Aug 1997 19:34:58 +0000 (19:34 +0000)]
Tidied up the sanitization.
Ian Lance Taylor [Thu, 14 Aug 1997 18:43:48 +0000 (18:43 +0000)]
* configure: When handling a Canadian Cross, handle YACC as well as
BISON. Just set BISON to bison. When setting YACC, prefer bison.
Stan Shebs [Thu, 14 Aug 1997 02:46:46 +0000 (02:46 +0000)]
keep remote-sds.c
Stan Shebs [Thu, 14 Aug 1997 02:41:15 +0000 (02:41 +0000)]
* remote-sds.c: New file, interface to SDS-compatible monitors.
* Makefile.in (remote-sds.o): Add build rule.
* config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt
(TDEPFILES): Add remote-sds.o.
Nick Clifton [Thu, 14 Aug 1997 02:13:32 +0000 (02:13 +0000)]
Added support for v850e and v850eq instructions.
Nick Clifton [Thu, 14 Aug 1997 02:03:34 +0000 (02:03 +0000)]
Added support for v850e and v850eq instructions.
Nick Clifton [Thu, 14 Aug 1997 01:55:51 +0000 (01:55 +0000)]
Add support for v850E and v850EQ instructions.
Nick Clifton [Thu, 14 Aug 1997 01:49:02 +0000 (01:49 +0000)]
Added support for new v850e and v850eq instructions.
Bob Manson [Wed, 13 Aug 1997 04:53:09 +0000 (04:53 +0000)]
Fix quoting.
Bob Manson [Wed, 13 Aug 1997 04:50:07 +0000 (04:50 +0000)]
Fix quoting.
Bob Manson [Wed, 13 Aug 1997 04:49:25 +0000 (04:49 +0000)]
* tests2.exp: Fix quoting.
* tests1.exp: Ditto.
Ian Lance Taylor [Wed, 13 Aug 1997 02:40:46 +0000 (02:40 +0000)]
* configure: If OSTYPE matches *win32*, try to find a good value for
CONFIG_SHELL.
Geoffrey Noer [Tue, 12 Aug 1997 21:38:54 +0000 (21:38 +0000)]
Tue Aug 12 14:37:18 1997 Geoffrey Noer <noer@cygnus.com>
* ocd.c (ocd_wait): loop until we're in BDM mode instead of
assuming control has returned to GDB.
Ian Lance Taylor [Tue, 12 Aug 1997 20:38:39 +0000 (20:38 +0000)]
* Makefile.in (install-only): Install tclIndex if ENABLE_IDE.
Richard Henderson [Tue, 12 Aug 1997 17:30:10 +0000 (17:30 +0000)]
* doc/internals.texi: Document rs_leb128.
Ian Lance Taylor [Tue, 12 Aug 1997 16:17:46 +0000 (16:17 +0000)]
* config/tc-m68k.c (m68k_ip): Give an error message for SIZE_BYTE
in ABSL case, rather than calling abort.
Richard Henderson [Tue, 12 Aug 1997 05:42:00 +0000 (05:42 +0000)]
* as.h (enum _relax_state): Add rs_leb128.
* read.c (potable): Add sleb128 and uleb128.
(sizeof_*leb128, output_*leb128, emit_leb128_expr, s_leb128): New
functions.
* read.h: Update prototypes.
* symbols.c (resolve_symbol_value): Streamline quite a bit. Return
the symbol value, add a second FINALIZE argument that prevents
changes from being comitted. Update all callers.
* write.c (cvt_frag_to_fill, relax_segment): Handle rs_leb128.
* doc/as.texinfo: Document the new pseudos.
Stan Shebs [Tue, 12 Aug 1997 02:35:11 +0000 (02:35 +0000)]
keep dink32 interface
Stan Shebs [Tue, 12 Aug 1997 02:34:14 +0000 (02:34 +0000)]
* dink32-rom.c: New file, support for DINK32 monitor.
* Makefile.in (dink32-rom.o): Add build rule.
* config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt
(TDEPFILES): Add dink32-rom.o.
* monitor.h (MO_32_REGS_PAIRED, MO_SETREG_INTERACTIVE,
MO_SETMEM_INTERACTIVE, MO_GETMEM_16_BOUNDARY,
MO_CLR_BREAK_1_BASED): New monitor interface flags.
* monitor.c: Use them.
(monitor_store_register): Use setreg.term if defined.
(monitor_insert_breakpoint, monitor_remove_breakpoint): Notice
if set_break and clr_break fields are empty.
Geoffrey Noer [Mon, 11 Aug 1997 23:40:26 +0000 (23:40 +0000)]
Mon Aug 11 16:22:36 1997 Geoffrey Noer <noer@cygnus.com>
* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): macro
BDM_BREAKPOINT already has braces around it, remove erroneous ones.
* ser-ocd.c (ocd_write): conditionalize on _WIN32 instead of
__CYGWIN32__
* config/powerpc/tm-ppc-eabi.h: remove BDM_NUM_REGS, BDM_REGMAP
* ppc-bdm.c: move BDM_NUM_REGS, BDM_REGMAP here from tm.h file,
fill in doc fields of bdm_ppc_ops.
(bdm_ppc_fetch_registers): don't ask for invalid registers such
as the MQ or floating point regs not present on ppc 8xx boards
(bdm_ppc_store_registers): don't write those same invalid registers
* config/i386/cygwin32.mh: stop including ocd.o ser-ocd.o
* config/powerpc/ppc-eabi.mt:
* config/powerpc/ppcle-eabi.mt:
* config/powerpc/ppc-sim.mt:
* config/powerpc/ppcle-sim.mt: include ser-ocd.o
Fred Fish [Mon, 11 Aug 1997 23:14:47 +0000 (23:14 +0000)]
* frame.h (enum lval_type): Conditionalize on __GNUC__
instead of __STDC__.
Ian Lance Taylor [Mon, 11 Aug 1997 17:50:58 +0000 (17:50 +0000)]
* Makefile.in, configure.in: Handle jstools like vmake.
Tom Tromey [Mon, 11 Aug 1997 16:49:53 +0000 (16:49 +0000)]
* gdbtk.c (gdbtk_init): Use ide_event_init_from_environment.
Ian Lance Taylor [Mon, 11 Aug 1997 16:46:40 +0000 (16:46 +0000)]
* aoutx.h (NAME(aout,final_link)): Don't emit the string table if
there are no symbols.
Geoffrey Noer [Mon, 11 Aug 1997 02:04:16 +0000 (02:04 +0000)]
Sun Aug 10 16:49:09 1997 Geoffrey Noer <noer@cygnus.com>
* ocd.c: move ocd_write_bytes proto to ocd.h since it is used
by ppc-bdm.c, use OCD_LOG_FILE to help debugging, define
BDM_BREAKPOINT if not defined in tm.h
(ocd_error): add new error cases
(ocd_start_remote): send the OCD_INIT command before
OCD_AYT and OCD_GET_VERSION calls, 80 was correct speed after all
(ocd_write_bytes): no longer static
(ocd_insert_breakpoint): no longer static
(ocd_remove_breakpoint): new
* ocd.h: add protos for ocd_write_bytes, ocd_insert_breakpoint,
and ocd_remove_breakpoint
* ppc-bdm.c: change bdm_ppc_ops so we call ocd_insert_breakpoint
and ocd_remove_breakpoint instead of memory_insert_breakpoint
and memory_remove_breakpoint.
(bdm_ppc_open): after calling ocd_open, modify DER
register so interrupts will drop us into debugging mode, finally
disable the watchdog timer on the board so we don't leave BDM
mode unexpectedly.
Jeff Law [Mon, 11 Aug 1997 01:10:13 +0000 (01:10 +0000)]
* utils.c (error): Fix return type for !ANSI_PROTOTYPES.
Avoids "void void error" which craps out the HP native compiler.
Geoffrey Noer [Mon, 11 Aug 1997 00:01:59 +0000 (00:01 +0000)]
Sun Aug 10 16:49:09 1997 Geoffrey Noer <noer@cygnus.com>
* ocd.c: move ocd_write_bytes proto to ocd.h since it is used
by ppc-bdm.c, use OCD_LOG_FILE to help debugging, define
BDM_BREAKPOINT if not defined in tm.h
(ocd_error): add new error cases
(ocd_start_remote): send the OCD_INIT command before
OCD_AYT and OCD_GET_VERSION calls
(ocd_write_bytes): no longer static
(ocd_insert_breakpoint): no longer static
(ocd_remove_breakpoint): new
* ocd.h: add protos for ocd_write_bytes, ocd_insert_breakpoint,
and ocd_remove_breakpoint
* ppc-bdm.c: change bdm_ppc_ops so we call ocd_insert_breakpoint
and ocd_remove_breakpoint instead of memory_insert_breakpoint
and memory_remove_breakpoint.
(bdm_ppc_open): after calling ocd_open, modify DER
register so interrupts will drop us into debugging mode, finally
disable the watchdog timer on the board so we don't leave BDM
mode unexpectedly.
Ian Lance Taylor [Sun, 10 Aug 1997 18:53:06 +0000 (18:53 +0000)]
* Makefile.am (MOSTLYCLEANFILES): Add site.bak, site.exp, stage,
stage1, and stage2.
(DISTCLEANFILES): Define.
* doc/Makefile.am (DISTCLEANFILES): Define.
* Makefile.in, doc/Makefile.in: Rebuild.
Ian Lance Taylor [Sun, 10 Aug 1997 18:47:36 +0000 (18:47 +0000)]
* coff-stgo32.c: Rename from coff-stubgo32.c to avoid old System V
file system 14 character limit.
* Makefile.am, configure.in: Corresponding changes.
* Makefile.in, configure: Rebuild.
Ian Lance Taylor [Sun, 10 Aug 1997 18:41:42 +0000 (18:41 +0000)]
* Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
configure.in if it is present.
Ian Lance Taylor [Sun, 10 Aug 1997 18:31:04 +0000 (18:31 +0000)]
keep arc.h
Ian Lance Taylor [Sat, 9 Aug 1997 20:30:19 +0000 (20:30 +0000)]
* configure.in: Change version number to 2.8.2. Call
AM_PROG_LIBTOOL. Remove shared library handling; now handled by
libtool. Add AM_CONFIG_HEADER. Change AC_PROG_INSTALL to
AM_PROG_INSTALL. Add AM_EXEEXT.
* Makefile.am (LINK): Remove.
(gprof_LDFLAGS): Remove
(gprof_DEPENDENCIES): Change libbfd.a to libbfd.la.
(gprof_LDADD): Likewise.
($(OBJECTS)): Depend upon gconfig.h and ../bfd/config.h.
* gprof.h: Undefine PACKAGE and VERSION after including BFD
sysdep.h file, then include new gconfig.h file.
* gprof.c (VERSION): Don't define.
* acconfig.h: New file.
* stamp-h.in: New file.
* gconfig.in: New file, created by autoheader.
* Makefile.in, configure, aclocal.m4: Rebuild.
Peter Schauer [Sat, 9 Aug 1997 08:51:41 +0000 (08:51 +0000)]
* values.c (value_primitive_field): Account for offset when
extracting the value of a bitfield.
From Paul Hilfinger <hilfingr@CS.Berkeley.EDU>.
Ian Lance Taylor [Sat, 9 Aug 1997 04:58:27 +0000 (04:58 +0000)]
tipo
Ian Lance Taylor [Sat, 9 Aug 1997 04:57:20 +0000 (04:57 +0000)]
* config/default.exp: Change ld, as, nm and strip from .new to
-new. Load ld-lib.exp rather than ld.exp.
* ld-bootstrap/bootstrap.exp: Use ld-new rather than ld.new.
* lib/ld-lib.exp: Rename from lib/ld.exp, for the benefit of
DejaGnu changes.
Ian Lance Taylor [Sat, 9 Aug 1997 04:54:28 +0000 (04:54 +0000)]
* Makefile.am: New file, based on old Makefile.in.
* acinclude.m4: New file, from old aclocal.m4.
* configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL. Remove
shared library handling; now handled by libtool. Replace
AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AC_PROG_YACC,
AC_PROG_LEX, and AC_DECL_YYTEXT. Call AM_MAINTAINER_MODE,
AM_CYGWIN32, and AM_EXEEXT. Don't call CY_CYGWIN32 or CY_EXEEXT.
* configure.host: Don't set HLDFLAGS, HLDENV, or RPATH_ENVVAR.
* acconfig.h: Mention PACKAGE and VERSION.
* stamp-h.in: New file.
* ldver.c (ld_program_vresion): Set ld_program_version from
VERSION.
* ldgram.y, ldlex.l: Replace VERSION with VERSIONK.
* Makefile.in: Now built with automake.
* aclocal.m4: Now built with aclocal.
* configure, config.in: Rebuild.
Mark Alexander [Sat, 9 Aug 1997 04:54:08 +0000 (04:54 +0000)]
* sim-calls.c (sim_store_register): Allow accumulators
other than A0 to be modified. Correct error message.
Mark Alexander [Sat, 9 Aug 1997 04:49:48 +0000 (04:49 +0000)]
start-sanitize-tic80
* config/tic80/tic80.mt:
(GDBSERVER-DEPFILES, GDBSERVER_LIBS): Define for gdbserver.
(SIM): Remove -lm to prevent make errors.
* configure.tgt: add gdbserver to configdirs for tic80.
end-sanitize-tic80
* gdbserver/utils.c (error): Change prototype to match defs.h.
* gdbserver/low-sim.c: Change simulator calls to use new interface.
* remote.c (remote_write_bytes): Include '$' at start of packet
and checksum at end of packet in overhead calculation.
Ian Lance Taylor [Sat, 9 Aug 1997 00:22:10 +0000 (00:22 +0000)]
remove wigglers.def
Ian Lance Taylor [Sat, 9 Aug 1997 00:21:50 +0000 (00:21 +0000)]
* ser-ocd.c: If _WIN32, include <windows.h>.
(dll_do_command): New static variable if _WIN32.
(ocd_open): Set dll_do_command if _WIN32.
(ocd_write): Use dll_do_command rather than do_command.
* config/i386/cygwin32.mh (XDEPFILES): Remove libwigglers.a.
(BDM_DLLNAME, BDM_LIBNAME, BDM_DEFFILE): Don't define.
($(BDM_LIBNAME)): Remove target.
* wigglers.def: Remove.
Ian Lance Taylor [Sat, 9 Aug 1997 00:19:16 +0000 (00:19 +0000)]
* gdbtk.c (gdbtk_init): Change gdbtk_lib_tmp and gdbtk_file to be
dynamically allocated, rather than fixed size. Pass "gdbtcl" to
ide_initialize_paths to match installed directory name. If IDE,
use auto_path to search for main.tcl.
* Makefile.in (install-only): If ENABLE_IDE, install from gdbtcl2
rather than gdbtcl.
David Edelsohn [Sat, 9 Aug 1997 00:07:14 +0000 (00:07 +0000)]
* arc.h: New file.
* common.h (EM_CYGNUS_ARC): Define.
Plus remove arc sanitization.
David Edelsohn [Fri, 8 Aug 1997 23:58:57 +0000 (23:58 +0000)]
* arc.h: New file.
Plus remove arc sanitization.
David Edelsohn [Fri, 8 Aug 1997 23:47:56 +0000 (23:47 +0000)]
* dis-asm.h (arc_get_disassembler): Declare.
Plus remove arc sanitization.
David Edelsohn [Fri, 8 Aug 1997 23:32:05 +0000 (23:32 +0000)]
remove arc sanitization
David Edelsohn [Fri, 8 Aug 1997 23:31:29 +0000 (23:31 +0000)]
* config.sub: Recognize `arc' cpu.
* configure.in: Likewise.
* config-ml.in: Likewise.
Ian Lance Taylor [Fri, 8 Aug 1997 20:32:44 +0000 (20:32 +0000)]
* config/i386/cygwin32.mh ($(BDM_LIBNAME)): Rename target from
libwigglers.def.
(libwigglers.a): Remove target.
Ian Lance Taylor [Fri, 8 Aug 1997 20:07:14 +0000 (20:07 +0000)]
* gdbtk.c (gdbtk_cleanup): New static function.
(gdbtk_init): Add gdbtk_cleanup as a final cleanup. Uncomment
call to ide_initialize_paths. If we can't initialize the event
system, set GDBTK_IDE to 0 in the Tcl interpreter. Create the
ide_window_register and the ide_window commands. Initialize tk,
itcl, and tix after initializing the IDE.
Ian Lance Taylor [Fri, 8 Aug 1997 19:20:42 +0000 (19:20 +0000)]
* configure.in (tixdir): Update for cygwin32 case for Tcl 8.0.
* configure: Rebuild.
Michael Meissner [Fri, 8 Aug 1997 17:13:23 +0000 (17:13 +0000)]
Add appropriate ocd/ppc-bdm deps
Martin Hunt [Fri, 8 Aug 1997 07:13:16 +0000 (07:13 +0000)]
Fri Aug 8 00:13:32 1997 Martin M. Hunt <hunt@cygnus.com>
* gdbtk.c (breakpoint_notify): Change buffer size from 100
to 256 to avoid memory corruption with very long pathnames.
Geoffrey Noer [Fri, 8 Aug 1997 03:24:53 +0000 (03:24 +0000)]
amend changelog entry slightly
Geoffrey Noer [Fri, 8 Aug 1997 02:57:35 +0000 (02:57 +0000)]
Thu Aug 7 19:40:52 1997 Geoffrey Noer <noer@cygnus.com>
Changes to OCD support to support wiggler box as well as
target boxes:
* ocd.c: change speed in init command to 0 from 80,
add (temporary) logging commands to help debugging,
(ocd_open): if "target ocd wiggler lpt" then use special
ser-ocd.c serial interface which communicates with Wigglers.dll,
otherwise do as we did before
(ocd_get_packet): add OCD_LOG_FILE and OCD_SET_CONNECTION to
switch of known commands of len 0
* ocd.h: add OCD_LOG_FILE
* serial.c (serial_open): do serial_interface_lookup on ocd
in the case of ocd
* ser-ocd.c: add buffer to contain responses from sending a
command to the Wigglers.dll.
(ocd_readchar): return curr char from buffer and increment ptr
(ocd_write): send buffer to Wigglers.dll, storing response in
return buffer and initializing curr location ptr to start of
buffer.
Martin Hunt [Thu, 7 Aug 1997 21:07:44 +0000 (21:07 +0000)]
Thu Aug 7 14:08:23 1997 Martin M. Hunt <hunt@cygnus.com>
* configure.in: Change required Tix version to 4.1.8.0 .
* configure: Rebuilt.
This page took 0.039596 seconds and 4 git commands to generate.