Jani Nikula [Wed, 16 Mar 2016 10:43:35 +0000 (12:43 +0200)]
drm/i915: hide away VBT private data in a separate header
We've been accumulating code across the driver that depends on the VBT
specific structures and defines. The VBT is an uncontrollable
beast. Encourage encapsulation of the VBT data by hiding the structures
and defines in a private header only to be included from intel_bios.c.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-7-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Mar 2016 16:06:58 +0000 (18:06 +0200)]
drm/i915: fix sparse warning for using false as NULL
drivers/gpu/drm/i915/intel_dpll_mgr.c:1200:32: warning: Using plain integer as NULL pointer
Fixes: 304b65cbdc8d ("drm/i915: Move SKL/KLB pll selection logic to intel_dpll_mgr.c")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458144418-20046-1-git-send-email-jani.nikula@intel.com
Maarten Lankhorst [Mon, 14 Mar 2016 08:27:54 +0000 (09:27 +0100)]
drm/i915: Move pll power state to crtc power domains.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457944075-14123-4-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Maarten Lankhorst [Mon, 14 Mar 2016 08:27:53 +0000 (09:27 +0100)]
drm/i915: Perform dpll commit first, v2.
Warn for the wrong mask in enable only. Disable will have the wrong mask now
because the new state is committed before disabling the old state.
Changes since v1:
- Use crtc_mask (Durgadoss)
- Rebase.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457944075-14123-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Maarten Lankhorst [Mon, 14 Mar 2016 08:27:52 +0000 (09:27 +0100)]
drm/i915: Use a crtc mask instead of a refcount for dpll functions, v2.
This makes it easier to verify correct dpll setup with only a single crtc.
It is also useful to detect double dpll enable/disable.
Changes since v1:
- Rebase on top of Ander's dpll rework.
- Change debugfs active to a mask.
- Change enabled_crtcs and active_crtcs to unsigned.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457944075-14123-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Lyude [Wed, 16 Mar 2016 19:18:04 +0000 (15:18 -0400)]
drm/i915: Fix race condition in intel_dp_destroy_mst_connector()
After unplugging a DP MST display from the system, we have to go through
and destroy all of the DRM connectors associated with it since none of
them are valid anymore. Unfortunately, intel_dp_destroy_mst_connector()
doesn't do a good enough job of ensuring that throughout the destruction
process that no modesettings can be done with the connectors. As it is
right now, intel_dp_destroy_mst_connector() works like this:
* Take all modeset locks
* Clear the configuration of the crtc on the connector, if there is one
* Drop all modeset locks, this is required because of circular
dependency issues that arise with trying to remove the connector from
sysfs with modeset locks held
* Unregister the connector
* Take all modeset locks, again
* Do the rest of the required cleaning for destroying the connector
* Finally drop all modeset locks for good
This only works sometimes. During the destruction process, it's very
possible that a userspace application will attempt to do a modesetting
using the connector. When we drop the modeset locks, an ioctl handler
such as drm_mode_setcrtc has the oppurtunity to take all of the modeset
locks from us. When this happens, one thing leads to another and
eventually we end up committing a mode with the non-existent connector:
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* failed to enable link training
[drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f
[drm:intel_dp_start_link_train [i915]] *ERROR* failed to start channel equalization
[drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f
[drm:intel_mst_pre_enable_dp [i915]] *ERROR* failed to allocate vcpi
And in some cases, such as with the T460s using an MST dock, this
results in breaking modesetting and/or panicking the system.
To work around this, we now unregister the connector at the very
beginning of intel_dp_destroy_mst_connector(), grab all the modesetting
locks, and then hold them until we finish the rest of the function.
CC: stable@vger.kernel.org
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Rob Clark <rclark@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458155884-13877-1-git-send-email-cpaul@redhat.com
Alex Dai [Wed, 16 Mar 2016 22:24:13 +0000 (15:24 -0700)]
drm/i915/guc: Support GuC SKL v6.1
This version of GuC firmware fixes the engine reset issue where golden
context LRC address is treated as page index by mistake. It also fixes
the problem that scheduler stops submiting to one engine when the other
engine work queue is full.
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Jani Nikula [Wed, 16 Mar 2016 10:43:34 +0000 (12:43 +0200)]
drm/i915/bios: drop has_mipi in favor of intel_bios_is_dsi_present
Favor a single point of truth instead of duplicating the
information. The change also filters out unsupported DSI ports at this
stage, accepting only ports A and C, instead of waiting until the port
checks.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-6-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Mar 2016 10:43:33 +0000 (12:43 +0200)]
drm/i915/panel: setup pwm backlight based on connector type
Use the connector type instead of VBT directly to decide which backlight
mechanism to use on VLV/CHV. (Indirectly, this is the same thing, but
hides the VBT use.)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-5-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Mar 2016 10:43:32 +0000 (12:43 +0200)]
drm/i915: move VBT based DSI presence check to intel_bios.c
Hide knowledge about VBT child devices in intel_bios.c.
v2: Move port check to intel_bios.c (Sivakumar)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-4-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Mar 2016 10:43:31 +0000 (12:43 +0200)]
drm/i915: move VBT based eDP port check to intel_bios.c
Hide knowledge about VBT child devices in intel_bios.c.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-3-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Mar 2016 10:43:30 +0000 (12:43 +0200)]
drm/i915: move VBT based LVDS presence check to intel_bios.c
Hide knowledge about VBT child devices in intel_bios.c.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-2-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Mar 2016 10:43:29 +0000 (12:43 +0200)]
drm/i915: move VBT based TV presence check to intel_bios.c
Hide knowledge about VBT child devices in intel_bios.c.
v2: also move int_tv_support check to intel_bios.c (Sivakumar)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-1-git-send-email-jani.nikula@intel.com
Jani Nikula [Tue, 15 Mar 2016 19:51:12 +0000 (21:51 +0200)]
drm/i915/bxt: fix dsi hw state pipe readout
BXT isn't as limited as BYT and CHT regarding DSI pipes and ports.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8bea85b86aaf7a15f854a656bf8d3208a3afe0bd.1458070700.git.jani.nikula@intel.com
Jani Nikula [Tue, 15 Mar 2016 19:51:11 +0000 (21:51 +0200)]
drm/i915/dsi: refactor dsi get hw state readout
Make the code easier to read and update. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/04b20a9be6a9481ca2eb2a42cdcdc27358152e5f.1458070700.git.jani.nikula@intel.com
Jani Nikula [Tue, 15 Mar 2016 19:51:10 +0000 (21:51 +0200)]
drm/i915: make transcoder_name return a string
Nicer for eDP (actually "EDP" instead of "D"), and makes future
expansion for DSI transcoders easier.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/2ac55ed584e450fe154daecb6453dff8eede5e7d.1458070700.git.jani.nikula@intel.com
Jani Nikula [Tue, 15 Mar 2016 19:51:09 +0000 (21:51 +0200)]
drm/i915: add for_each_port_masked macro
Same as for_each_dsi_port, but for general use. Leave the
for_each_dsi_port version around as an "alias" for now to not cause too
much churn. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a0ef5bf33395e1fcd87178b17d6687b022042cf7.1458070700.git.jani.nikula@intel.com
Jani Nikula [Wed, 16 Mar 2016 10:21:40 +0000 (12:21 +0200)]
drm/i915/dsi: start using enum mipi_dsi_pixel_format
A small step moving us closer to DRM MIPI DSI code. Use enum
mipi_dsi_pixel_format instead of our own. The first benefit is being
able to use common mipi_dsi_pixel_format_to_bpp().
There's a little back and forth conversion with the VBT -> enum ->
register, since we have just shoved the VBT value into the register
directly. Longer term, all the VBT parsing and deciphering should be
done in intel_bios.c, and abstracted there.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458123700-16003-2-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Mar 2016 10:21:39 +0000 (12:21 +0200)]
drm/i915/dsi: lose the loose 666 format name in favor of packed
The enum mipi_dsi_pixel_format defines MIPI_DSI_FMT_RGB666 for the
"loose" 24 bpp format and MIPI_DSI_FMT_RGB666_PACKED for the 18 bpp
format. We have this the other way round, defining a loose version for
24 bpp.
Follow suit with what's in enum mipi_dsi_pixel_format to avoid future
confusion. Rename
VID_MODE_FORMAT_RGB666 -> VID_MODE_FORMAT_RGB666_PACKED
VID_MODE_FORMAT_RGB666_LOOSE -> VID_MODE_FORMAT_RGB666
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458123700-16003-1-git-send-email-jani.nikula@intel.com
Chris Wilson [Mon, 7 Mar 2016 12:05:57 +0000 (12:05 +0000)]
drm/i915/csr: Allow matching unknown HW steppings with generic firmware
If the firmware is generic and has a run-anywhere mode, enable it rather
than completely failing on unknown HW revisions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457352357-8433-1-git-send-email-chris@chris-wilson.co.uk
Nathan Schulte [Tue, 15 Mar 2016 15:14:05 +0000 (10:14 -0500)]
drm/i915: add module param "enable_dp_mst"
Adds an (unsafe; auto-kernel-tainting) boolean module parameter to the i915
drm driver: "enable_dp_mst", which is enabled by default. Disabling the
parameter forces newly connected DisplayPort sinks to report as not
supporting multi-stream transport (MST), thus "forcing" the use of
single-stream transport (SST).
v2: rename parameter to conform to style
v3: add signoff
Signed-off-by: Nathan Schulte <nmschulte@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458054845-5837-1-git-send-email-nmschulte@gmail.com
Tvrtko Ursulin [Wed, 16 Mar 2016 11:00:40 +0000 (11:00 +0000)]
drm/i915: More renaming of rings to engines
This time using only sed and a few by hand.
v2: Rename also intel_ring_id and intel_ring_initialized.
v3: Fixed typo in intel_ring_initialized.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458126040-33105-1-git-send-email-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Wed, 16 Mar 2016 11:00:39 +0000 (11:00 +0000)]
drm/i915: More intel_engine_cs renaming
Some trivial ones, first pass done with Coccinelle:
@@
@@
(
- I915_NUM_RINGS
+ I915_NUM_ENGINES
|
- intel_ring_flag
+ intel_engine_flag
|
- for_each_ring
+ for_each_engine
|
- i915_gem_request_get_ring
+ i915_gem_request_get_engine
|
- intel_ring_idle
+ intel_engine_idle
|
- i915_gem_reset_ring_status
+ i915_gem_reset_engine_status
|
- i915_gem_reset_ring_cleanup
+ i915_gem_reset_engine_cleanup
|
- init_ring_lists
+ init_engine_lists
)
But that didn't fully work so I cleaned it up with:
for f in *.[hc]; do sed -i -e s/I915_NUM_RINGS/I915_NUM_ENGINES/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_request_get_ring/i915_gem_request_get_engine/ $f; done
for f in *.[hc]; do sed -i -e s/intel_ring_flag/intel_engine_flag/ $f; done
for f in *.[hc]; do sed -i -e s/intel_ring_idle/intel_engine_idle/ $f; done
for f in *.[hc]; do sed -i -e s/init_ring_lists/init_engine_lists/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_cleanup/i915_gem_reset_engine_cleanup/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_status/i915_gem_reset_engine_status/ $f; done
v2: Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tvrtko Ursulin [Wed, 16 Mar 2016 11:00:38 +0000 (11:00 +0000)]
drm/i915: Rename intel_engine_cs struct members
below and a couple manual fixups.
@@
identifier I, J;
@@
struct I {
...
- struct intel_engine_cs *J;
+ struct intel_engine_cs *engine;
...
}
@@
identifier I, J;
@@
struct I {
...
- struct intel_engine_cs J;
+ struct intel_engine_cs engine;
...
}
@@
struct drm_i915_private *d;
@@
(
- d->ring
+ d->engine
)
@@
struct i915_execbuffer_params *p;
@@
(
- p->ring
+ p->engine
)
@@
struct intel_ringbuffer *r;
@@
(
- r->ring
+ r->engine
)
@@
struct drm_i915_gem_request *req;
@@
(
- req->ring
+ req->engine
)
v2: Script missed the tracepoint code - fixed up by hand.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tvrtko Ursulin [Wed, 16 Mar 2016 11:00:37 +0000 (11:00 +0000)]
drm/i915: Rename intel_engine_cs function parameters
@@
identifier func;
@@
func(..., struct intel_engine_cs *
- ring
+ engine
, ...)
{
<...
- ring
+ engine
...>
}
@@
identifier func;
type T;
@@
T func(..., struct intel_engine_cs *
- ring
+ engine
, ...);
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tvrtko Ursulin [Wed, 16 Mar 2016 11:00:36 +0000 (11:00 +0000)]
drm/i915: Rename local struct intel_engine_cs variables
Done by the Coccinelle script below plus a manual
intervention to GEN8_RING_SEMAPHORE_INIT.
@@
expression E;
@@
- struct intel_engine_cs *ring = E;
+ struct intel_engine_cs *engine = E;
<+...
- ring
+ engine
...+>
@@
@@
- struct intel_engine_cs *ring;
+ struct intel_engine_cs *engine;
<+...
- ring
+ engine
...+>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Imre Deak [Mon, 14 Mar 2016 17:55:34 +0000 (19:55 +0200)]
drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs
After the commit below the Broxton PLL IDs had an off-by-one error, so
fix this up. Also add a missing brace at intel_shared_dpll_init(), it
happened to compile only due to the way the IS_BROXTON macro is defined.
v2:
- remove debugging left-over
Fixes: a3c988ea068c ("drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code")
CC: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457978134-12362-1-git-send-email-imre.deak@intel.com
Maarten Lankhorst [Wed, 9 Mar 2016 09:35:45 +0000 (10:35 +0100)]
drm/i915: Nuke fbc members from intel_crtc->atomic, v4.
Whenever there's an update to the primary plane,
fbc_pre_update and fbc_post_update are called. Kill off
intel_crtc->atomic.update_fbc and now that intel_crtc->atomic
is empty, kill it off too.
Changes since v1:
- Add a intel_fbc_supports_rotation helper.
Changes since v2:
- Remove intel_fbc_supports_rotation_helper.
- Remove unrelated changes.
Changes since v3:
- Rebase
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457516145-32117-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Maarten Lankhorst [Wed, 9 Mar 2016 09:35:44 +0000 (10:35 +0100)]
drm/i915: Remove some post-commit members from intel_crtc->atomic, v3.
fb_bits is useful to have in the crtc_state for cs flips when
the code is updated to use intel_frontbuffer_flip_prepare/complete.
So calculate it in advance and move it to crtc_state. The other stuff
can be calculated in post_plane_update, and aren't useful elsewhere.
Changes since v1:
- Changing wording, remove comment about loop.
Changes since v2:
- Rebase.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457516145-32117-1-git-send-email-maarten.lankhorst@linux.intel.com
Daniel Vetter [Wed, 16 Mar 2016 07:11:09 +0000 (08:11 +0100)]
Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued
Backmerge because:
- Maarten needs latest atomic patches from drm-misc.
- Lionel needs the color manager core patch from drm-misc.
- Ander extracted intel_dpll_mgr.c, we need a backmerge to avoid git
losing track of things too often (right now it seems ok due to
cherry-picks).
- Tvrtko needs a stable baseline to apply some large-scale renaming
patches to i915 GEM code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Arnd Bergmann [Mon, 14 Mar 2016 14:24:10 +0000 (15:24 +0100)]
nouveau: fix nv40_perfctr_next() cleanup regression
gcc-6 warns about code in the nouveau driver that is obviously silly:
drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c: In function 'nv40_perfctr_next':
drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c:62:19: warning: self-comparison always evaluats to false [-Wtautological-compare]
if (pm->sequence != pm->sequence) {
The behavior was accidentally introduced in a patch described as "This is
purely preparation for upcoming commits, there should be no code changes here.".
As far as I can tell, that was true for the rest of that patch except for
this one function, which has been changed to a NOP.
This patch restores the original behavior.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 8c1aeaa13954 ("drm/nouveau/pm: cosmetic changes")
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 16 Mar 2016 01:09:26 +0000 (11:09 +1000)]
Merge tag 'topic/drm-misc-2016-03-14' of git://anongit.freedesktop.org/drm-intel into drm-next
* tag 'topic/drm-misc-2016-03-14' of git://anongit.freedesktop.org/drm-intel: (27 commits)
drm: atomic helper: do not unreference error pointer
drm/edid: Extract SADs properly from multiple audio data blocks
drm: fix blob pointer check
drm: introduce pipe color correction properties
drm/atomic: Clean up update_connector_routing.
drm/atomic: Clean up steal_encoder, v2.
drm/atomic: Handle encoder assignment conflicts in a separate check, v3.
drm/atomic: Handle encoder stealing from set_config better.
drm/atomic: Always call steal_encoder, v2.
drm/ast: removed optional dummy crtc mode_fixup function.
drm/bochs: removed optional dummy crtc mode_fixup function.
drm/fsl-dcu: removed optional dummy crtc mode_fixup function.
drm/virtio: removed optional dummy crtc mode_fixup function.
drm/nouveau/dispnv04: removed optional dummy crtc mode_fixup function.
drm/atmel-hlcdc: remove optional dummy crtc mode_fixup function.
drm/sti: removed optional dummy crtc mode_fixup function.
drm/shmobile: removed optional dummy crtc mode_fixup function.
drm/msm/mdp: removed optional dummy crtc mode_fixup function.
drm/omapdrm: removed optional dummy crtc mode_fixup function.
drm/rcar-du: removed optional dummy crtc mode_fixup function.
...
Dave Airlie [Wed, 16 Mar 2016 01:09:00 +0000 (11:09 +1000)]
Merge tag 'drm-amdkfd-next-fixes-2016-03-15' of git://people.freedesktop.org/~gabbayo/linux into drm-next
* tag 'drm-amdkfd-next-fixes-2016-03-15' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: uninitialized variable in dbgdev_wave_control_set_registers()
Tomi Valkeinen [Tue, 15 Mar 2016 12:55:53 +0000 (14:55 +0200)]
drm/omap: fix panel/encoder probes
The recent changes which removed platform data support from panels &
encoders had a few mistakes, causing probes of DVI connector and DSI
command mode panels to fail every time due to missing '!'. Fix the
if()s.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dan Carpenter [Fri, 11 Mar 2016 07:51:51 +0000 (10:51 +0300)]
drm/amdkfd: uninitialized variable in dbgdev_wave_control_set_registers()
At the end of the function we expect "status" to be zero, but it's
either -EINVAL or uninitialized.
Fixes: 788bf83db301 ('drm/amdkfd: Add wave control operation to debugger')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Dave Airlie [Mon, 14 Mar 2016 23:49:19 +0000 (09:49 +1000)]
Merge tag 'drm-vc4-next-2016-03-14' of github.com:anholt/linux into drm-next
This pull request covers what's left for 4.6. Notably, it includes a
significant 3D performance improvement and a fix to HDMI hotplug
detection for the Pi2/3.
* tag 'drm-vc4-next-2016-03-14' of github.com:anholt/linux:
drm/vc4: Recognize a more specific compatible string for V3D.
dt-bindings: Add binding docs for V3D.
drm/vc4: Return -EFAULT on copy_from_user() failure
drm/vc4: Respect GPIO_ACTIVE_LOW on HDMI HPD if set in the devicetree.
drm/vc4: Let gpiolib know that we're OK with sleeping for HPD.
drm/vc4: improve throughput by pipelining binning and rendering jobs
Daniel Vetter [Mon, 14 Mar 2016 07:16:51 +0000 (08:16 +0100)]
drm/i915: Update DRIVER_DATE to
20160314
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Eric Anholt [Fri, 4 Mar 2016 20:32:07 +0000 (12:32 -0800)]
drm/vc4: Recognize a more specific compatible string for V3D.
The Raspberry Pi Foundation's firmware updates are shipping device
trees using the old string, so we'll keep recognizing that as this rev
of V3D. Still, we should use a more specific name in the upstream DT
to clarify which board is being supported, in case we do other revs of
V3D in the future.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Eric Anholt [Fri, 4 Mar 2016 20:32:06 +0000 (12:32 -0800)]
dt-bindings: Add binding docs for V3D.
This was missed in the upstreaming process.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Dave Airlie [Mon, 14 Mar 2016 00:49:40 +0000 (10:49 +1000)]
Merge branch 'linux-4.6' of git://github.com/skeggsb/linux into drm-next
- GM20x secure boot support (hence, acceleration, finally \o/)
- GM200 support
- GM20B clock driver
- Support for power sensors on some GPUs
- Various other fixes all over the place
* 'linux-4.6' of git://github.com/skeggsb/linux: (95 commits)
drm/nouveau/clk/gm20b: add basic driver
drm/nouveau/clk/gk20a: share reusable structures/functions
drm/nouveau/clk/gk20a: set lowest frequency during init()
drm/nouveau/clk/gk20a: split gk20a_clk_new()
drm/nouveau/clk/gk20a: abstract pl_to_div
drm/nouveau/clk/gk20a: put mnp values into their own struct
drm/nouveau/clk/gk20a: emit parent rate as debug message
drm/nouveau/clk/gk20a: only restore divider to 1:1 if needed
drm/nouveau/clk/gk20a: only compute n_lo if needed
drm/nouveau/clk/gk20a: fix VCO bit mask
drm/nouveau/clk/gk20a: rename enable/disable functions
drm/nouveau/clk/gk20a: reorganize variables in gk20a_pllg_calc_mnp()
drm/nouveau/clk/gk20a: convert parameters to Khz
drm/nouveau/volt: add GM20B driver
drm/nouveau/volt/gk20a: split constructor
drm/nouveau/volt/gk20a: share reusable members & functions
drm/nouveau/ce/gm107: expose MaxwellDmaCopyA
drm/nouveau/fifo/gm107: KeplerChannelGpfifoB, and 2048 channels
drm/nouveau/fifo/gk110: expose KeplerChannelGpfifoB
drm/nouveau/fifo/gk104: submit NOP after all PBDMA_INTR_0, not just DEVICE
...
Alexandre Courbot [Fri, 12 Feb 2016 05:38:18 +0000 (14:38 +0900)]
drm/nouveau/clk/gm20b: add basic driver
Add a basic clock driver that reuses the GK20A logic.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 05:23:22 +0000 (14:23 +0900)]
drm/nouveau/clk/gk20a: share reusable structures/functions
Make functions/structures that the GM20B driver will reuse public.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 07:59:16 +0000 (16:59 +0900)]
drm/nouveau/clk/gk20a: set lowest frequency during init()
Err on the safe side by setting the lowest frequency (and thus voltage)
during device init.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 05:22:17 +0000 (14:22 +0900)]
drm/nouveau/clk/gk20a: split gk20a_clk_new()
This allows to instanciate drivers that use the same logic as gk20a with
different parameters.
Add a constructor function to allow other chips that inherit from this
clock to easily initialize its members
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 04:56:38 +0000 (13:56 +0900)]
drm/nouveau/clk/gk20a: abstract pl_to_div
pl_to_div may be done differently depending on the chip. Abstract this
operation so the same logic can be reused for them as well.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 28 Oct 2015 09:31:28 +0000 (18:31 +0900)]
drm/nouveau/clk/gk20a: put mnp values into their own struct
This allows us to read them using one single function and will be handy
to the GM20B driver.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 08:22:53 +0000 (17:22 +0900)]
drm/nouveau/clk/gk20a: emit parent rate as debug message
Most users are probably not interested in this information.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 05:19:27 +0000 (14:19 +0900)]
drm/nouveau/clk/gk20a: only restore divider to 1:1 if needed
Only restore the 1:1 divider if it is not set already. Also use the
proper masks for this operation and add a second write as done in the
Android code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 05:15:57 +0000 (14:15 +0900)]
drm/nouveau/clk/gk20a: only compute n_lo if needed
n_lo is used if we are going to slide. Compute it only if that condition
succeeds to avoid confusion about future usage of this computation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 05:13:21 +0000 (14:13 +0900)]
drm/nouveau/clk/gk20a: fix VCO bit mask
Fix the mask specified to switch to VCO mode was given as an (incorrect)
immediate value. Although the side-effect happens to be the same, this
is clearly incorrect.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 05:07:07 +0000 (14:07 +0900)]
drm/nouveau/clk/gk20a: rename enable/disable functions
gk20a_pllg_disable() is only used in the context of gk20a_clk_fini().
Move its body there and rename _gk20a_pllg_enable() and
_gk20a_pllg_disable() to non-underscored versions.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 05:05:01 +0000 (14:05 +0900)]
drm/nouveau/clk/gk20a: reorganize variables in gk20a_pllg_calc_mnp()
Move some variables declarations to the scope where they are actually
used to make the code easier to follow.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 28 Oct 2015 08:36:06 +0000 (17:36 +0900)]
drm/nouveau/clk/gk20a: convert parameters to Khz
Perform computations in Khz instead of Mhz for better precision.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Tue, 27 Oct 2015 03:35:14 +0000 (12:35 +0900)]
drm/nouveau/volt: add GM20B driver
Add basic GM20B volt driver that reuses the GK20A logic.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 12 Feb 2016 08:44:21 +0000 (17:44 +0900)]
drm/nouveau/volt/gk20a: split constructor
Split the constructor function so we can reuse the same logic in other
chips.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Vince Hsu [Mon, 27 Apr 2015 03:48:02 +0000 (11:48 +0800)]
drm/nouveau/volt/gk20a: share reusable members & functions
The CVB calculation and voltage setting functions can be reused for the
future chips. So move the declaration to gk20a.h.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/ce/gm107: expose MaxwellDmaCopyA
The HW accepts KeplerDmaCopyA and MaxwellDmaCopyA classes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gm107: KeplerChannelGpfifoB, and 2048 channels
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk110: expose KeplerChannelGpfifoB
This class supports a WFI method (0x0078) that's not present on the
KeplerChannelGpfifoA class.
The binary driver exposes both classes on these GPUs for some reason,
though there doesn't appear to be any difference in the setup that's
done for each (ie. even if you allocate GpfifoA, the WFI method will
still work).
We shall just expose GpfifoB, as I don't see a good reason to report
the presence of both.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: submit NOP after all PBDMA_INTR_0, not just DEVICE
Prevents the same interrupt from re-triggering forever.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: add vic plumbing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: add sec plumbing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: add nvdec plumbing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: add nvenc plumbing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: add msenc plumbing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/core: add vic plumbing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/core: add nvdec plumbing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/core: add nvenc plumbing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/core: add msenc plumbing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/core: sort engine indices alphabetically
Unlike subdevs, these aren't initialised in a defined order.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: make use of topology info during gpfifo construction
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: make use of topology info during fault recovery
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: make use of topology info when handling ctxsw timeout
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: read device topology information from hw
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: cosmetic engine->runlist changes
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: don't attempt recovery of unknown mmu engines
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: identify fault-recovery members more clearly
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gk104: rename spoon to pbdma, and move detection to oneinit
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gf100: fix certain engines not being recovered after a fault
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gf100: don't attempt recovery of unknown mmu engines
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gf100: identify fault-recovery members more clearly
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 11 Mar 2016 03:09:28 +0000 (13:09 +1000)]
drm/nouveau/fifo/gf100: rename spooon to pbdma, and move detection to oneinit
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 10 Mar 2016 11:19:00 +0000 (11:19 +0000)]
drm/nouveau/gr/fuc: Store $r0 in interrupt handler
It's supposed to always be 0, but at least nv_iowr() temporarily violates
this. Since the ih touches $r0, it should be stored.
Signed-off-by: Roy Spliet <rs855@cam.ac.uk>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Karol Herbst [Wed, 2 Mar 2016 16:23:07 +0000 (17:23 +0100)]
drm/nouveau/pmu/fuc: use imm32 in ld/st macros
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Karol Herbst [Wed, 2 Mar 2016 16:23:06 +0000 (17:23 +0100)]
drm/nouveau/pmu/fuc: use the call macro instead of using the call instruction directly
the macro deals with target specific differences and so we should always use
this
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Karol Herbst [Wed, 2 Mar 2016 16:23:05 +0000 (17:23 +0100)]
drm/nouveau/pmu/fuc: replace mov+sethi with imm32
on gk208+ we can simply mov 32bits, so we should have a single mov there
v2: use or operator instead of add
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Karol Herbst [Wed, 2 Mar 2016 16:23:04 +0000 (17:23 +0100)]
drm/nouveau/pmu/fuc: fix imm32 for gk208+
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Sun, 6 Mar 2016 21:06:06 +0000 (16:06 -0500)]
drm/nouveau/core: use vzalloc for allocating ramht
Most calls to nvkm_ramht_new use 0x8000 as the size. This results in a
fairly sizeable chunk of memory to be allocated, which may not be
available with kzalloc. Since this is done fairly rarely (once per
channel), use vzalloc instead.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Tue, 1 Mar 2016 07:59:05 +0000 (16:59 +0900)]
drm/nouveau/fifo/gk104: kick channel upon removal
A channel may still be processed by the PBDMA even after removal, unless
it is properly kicked. Some chips are more sensible to this than others,
with GM20B triggering the issue very easily (the PBDMA will try to fetch
methods from the previously-removed channel after a new one is added).
Make sure this cannot happen by kicking the channel right after it is
disabled, and before the new runlist is submitted.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Thu, 3 Mar 2016 07:38:12 +0000 (16:38 +0900)]
drm/nouveau/instmem/gk20a: add write barrier when releasing DMA object
When using the DMA-API for instmem, we may obtain a write-combined
mapping. For such cases, add a write barrier in
gk20a_instobj_release_dma() to make sure that all writes have reached
memory at this time.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Thu, 3 Mar 2016 07:03:02 +0000 (16:03 +0900)]
drm/nouveau/device/pci: set as non-CPU-coherent on ARM64
Without this buffer inconsistencies may appear between the CPU
and GPU when using a PCI GPU on an ARM64 board.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 2 Mar 2016 10:13:42 +0000 (19:13 +0900)]
drm/nouveau/hwmon: fix crash on non-PCI platforms
Registration of the hwmon device will fail on non-PCI systems since
dev->pdev is NULL in that case. Use the more generic drm_device::dev
member that points to the same and is always set no matter the platform.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 2 Mar 2016 10:13:03 +0000 (19:13 +0900)]
drm/nouveau: silence unimportant HDMI status message
On non-PCI devices, nobody should really care if the device does not
provide HDMI...
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 2 Mar 2016 10:12:27 +0000 (19:12 +0900)]
drm/nouveau/bo: consider DMA buffers on x86 only
The DMA API has different semantics on different architectures.
Currently on arm64, it can only provide memory from a small pool which
dries up quickly if we attempt to allocate big buffers from it.
Do not consider that option when running on non-x86, since regular TTM
buffers are the (current) best-fit for ARM platforms.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Tue, 1 Mar 2016 08:39:00 +0000 (17:39 +0900)]
drm/nouveau/ltc/gf100: use more reasonable timeout value
LTC operations timeout was set to 2ms, which may be too low for devices
that run at very low clocks (e.g. GM20B) and trigger timeout messages.
Set the timeout to the default 2s. Also remove the redundant error
messages since nvkm_wait_msec() will already display a warning.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Tue, 1 Mar 2016 07:51:58 +0000 (16:51 +0900)]
drm/nouveau/fifo/gk104: take runlist target into account
Bits 28:29 of RUNLIST_BASE specify the memory target of the runlist. Set
it to 0x3 (SYS_MEM_NONCOHERENT) if the runlist object resides in system
memory.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Tue, 1 Mar 2016 07:51:57 +0000 (16:51 +0900)]
drm/nouveau/fifo/gf100: take runlist target into account
Bits 28:29 of RUNLIST_BASE specify the memory target of the runlist. Set
it to 0x3 (SYS_MEM_NONCOHERENT) if the runlist object resides in system
memory.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Xia Yang [Thu, 25 Feb 2016 08:59:08 +0000 (17:59 +0900)]
drm/nouveau/fifo/gk104: fix chid bit mask
Fix the channel id bit mask in FIFO schedule timeout error handling.
FIFO_ENGINE_STATUS_NEXT_ID is bit 27:16 thus 0x0fff0000.
FIFO_ENGINE_STATUS_ID is bit 11:0 thus 0x00000fff.
Signed-off-by: Xia Yang <xiay@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Thu, 25 Feb 2016 06:08:42 +0000 (15:08 +0900)]
drm/nouveau/instmem/gk20a: set DMA mask early
DMA mask is typically set in nouveau_ttm_init(), but this function is
called late during initialization and GK20A's instmem will have called
DMA functions before this happens.
Having a wrongly set DMA mask can result in the use of unneeded bounce
buffers. Set it early to avoid this.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 25 Feb 2016 00:40:51 +0000 (10:40 +1000)]
drm/nouveau/gr/gm206: remove implementation, it's now identical to gm200
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This page took 0.044265 seconds and 5 git commands to generate.