Alan Modra [Mon, 19 Jan 2015 08:27:04 +0000 (18:57 +1030)]
Extend .reloc to accept some BFD_RELOCs
Tests that bfd_perform_reloc doesn't freak over a NONE reloc at end
of section.
gas/
* read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}.
* write.c (get_frag_for_reloc): Allow match just past end of frag.
gas/testsuite/
* gas/all/none.s,
* gas/all/none.d: New test.
* gas/all/gas.exp: Run it.
Alan Modra [Mon, 19 Jan 2015 07:45:30 +0000 (18:15 +1030)]
More fixes related to NONE relocs
* elf32-bfin.c (bfin_bfd_reloc_type_lookup): Correct loop iteration
to allow return of first howto.
* elf32-fr30.c (fr30_reloc_type_lookup): Likewise.
* elf32-m32c.c (m32c_reloc_type_lookup): Likewise.
* elf32-moxie.c (moxie_reloc_type_lookup): Likewise.
* elf32-or1k.c (or1k_reloc_type_lookup): Likewise.
* elf32-rl78.c (rl78_reloc_type_lookup): Likewise.
* elf32-rx.c (rx_reloc_type_lookup): Likewise.
* elf32-tilepro.c (tilepro_reloc_type_lookup): Likewise.
* elf32-xstormy16.c (xstormy16_reloc_type_lookup): Likewise.
* elfxx-tilegx.c (tilegx_reloc_type_lookup): Likewise.
* elf32-nios2.c (nios2_reloc_map): Add mapping for R_NIOS2_NONE.
* elf32-spu.c (spu_elf_bfd_to_reloc_type): Allow return of R_SPU_NONE.
(spu_elf_reloc_type_lookup): Adjust to suit.
Alan Modra [Mon, 19 Jan 2015 00:06:26 +0000 (10:36 +1030)]
Fallout from recent bfd_reloc_outofrange changes
Commit
ec93045b and
cd21f5da introduced a large number of tic4x and
tic54x regressions, due to the new checks being wrong for targets
with octets_per_byte != 1. To fix that I introduced a new
bfd_get_section_limit_octets and performed the check on octets rather
than byte adresses, reducing the number of bfd_octets_per_byte calls.
bfd_octets_per_byte is rather expensive..
I then wondered why the same bfd_reloc_outofrange check added to
bfd_perform_relocation wasn't also added to bfd_install_relocation.
The two functions are virtually identical and ought to remain that
way. However, adding the same check to bfd_install_relocation
resulted in ld-elf "FAIL Link eh-group.o to eh-group" on many ELF
targets, including x64_64-linux. The reason being that eh-group.o
has NONE relocs at the end of a section, and most targets give NONE
relocs a non-zero size. So if we are to keep the new outofrange
check it appears that NONE relocs must have a zero size.
* bfd-in.h (bfd_get_section_limit_octets): New define, extracted from..
(bfd_get_section_limit): ..here.
* reloc.c (bfd_perform_relocation): Correct bfd_reloc_outofrange check.
(bfd_install_relocation, _bfd_final_link_relocate): Add same check here.
* elf32-sh.c (sh_elf_reloc): Correct bfd_reloc_outofrange check.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): Remove duplicated
bfd_reloc_outofrange check.
* bfd-in2.h: Regenerate.
* cpu-ns32k.c (_bfd_do_ns32k_reloc_contents): Return bfd_reloc_ok
on zero size relocs.
* ecoff.c (ecoff_reloc_link_order): Likewise.
* elf32-nds32.c (nds32_relocate_contents): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise.
* reloc.c (_bfd_relocate_contents): Don't bomb on zero size relocs.
(_bfd_clear_contents): Likewise.
* elfxx-mips.c (mips_elf_obtain_contents): Likewise.
(mips_elf_perform_relocation): Likewise.
* aoutx.h (aout_link_reloc_link_order): Allow for NULL return
from malloc on zero size alloc.
* cofflink.c (_bfd_coff_reloc_link_order): Likewise.
* elflink.c (elf_reloc_link_order): Likewise.
* linker.c (_bfd_generic_reloc_link_order): Likewise.
* pdp11.c (aout_link_reloc_link_order): Likewise.
* xcofflink.c (xcoff_reloc_link_order): Likewise.
* aoutx.h (howto_table_ext): Ensure NONE relocs have size 3,
bitsize 0, and complain_overflow_dont.
* coff-sparc.c (coff_sparc_howto_table): Likewise.
* elf-hppa.h (elf_hppa_howto_table): Likewise.
* elf-m10200.c (elf_mn10200_howto_table): Likewise.
* elf-m10300.c (elf_mn10300_howto_table): Likewise.
* elf32-arc.c (elf_arc_howto_table): Likewise.
* elf32-arm.c (elf32_arm_howto_table_1): Likewise.
* elf32-avr.c (elf_avr_howto_table): Likewise.
* elf32-bfin.c (bfin_howto_table): Likewise.
* elf32-cr16.c (cr16_elf_howto_table): Likewise.
* elf32-cris.c (cris_elf_howto_table): Likewise.
* elf32-crx.c (crx_elf_howto_table): Likewise.
* elf32-d10v.c (elf_d10v_howto_table): Likewise.
* elf32-d30v.c (elf_d30v_howto_table): Likewise.
* elf32-dlx.c (dlx_elf_howto_table): Likewise.
* elf32-epiphany.c (epiphany_elf_howto_table): Likewise.
* elf32-fr30.c (fr30_elf_howto_table): Likewise.
* elf32-frv.c (elf32_frv_howto_table): Likewise.
* elf32-h8300.c (h8_elf_howto_table): Likewise.
* elf32-i370.c (i370_elf_howto_raw): Likewise.
* elf32-i386.c (elf_howto_table): Likewise.
* elf32-i860.c (elf32_i860_howto_table): Likewise.
* elf32-i960.c (elf32_i960_relocate): Likewise.
* elf32-ip2k.c (ip2k_elf_howto_table): Likewise.
* elf32-iq2000.c (iq2000_elf_howto_table): Likewise.
* elf32-lm32.c (lm32_elf_howto_table): Likewise.
* elf32-m32c.c (m32c_elf_howto_table): Likewise.
* elf32-m32r.c (m32r_elf_howto_table): Likewise.
* elf32-m68hc11.c (elf_m68hc11_howto_table): Likewise.
* elf32-m68hc12.c (elf_m68hc11_howto_table): Likewise.
* elf32-m68k.c (howto_table): Likewise.
* elf32-mcore.c (mcore_elf_howto_raw): Likewise.
* elf32-mep.c (mep_elf_howto_table): Likewise.
* elf32-metag.c (elf_metag_howto_table): Likewise.
* elf32-microblaze.c (microblaze_elf_howto_raw): Likewise.
* elf32-mips.c (elf_mips_howto_table_rel): Likewise.
* elf32-moxie.c (moxie_elf_howto_table): Likewise.
* elf32-msp430.c (elf_msp430_howto_table): Likewise.
* elf32-mt.c (mt_elf_howto_table): Likewise.
* elf32-nds32.c (nds32_elf_howto_table): Likewise.
* elf32-nios2.c (elf_nios2_howto_table_rel): Likewise.
* elf32-or1k.c (or1k_elf_howto_table): Likewise.
* elf32-pj.c (pj_elf_howto_table): Likewise.
* elf32-ppc.c (ppc_elf_howto_raw): Likewise.
* elf32-rl78.c (rl78_elf_howto_table): Likewise.
* elf32-rx.c (rx_elf_howto_table): Likewise.
* elf32-s390.c (elf_howto_table): Likewise.
* elf32-score.c (elf32_score_howto_table): Likewise.
* elf32-score7.c (elf32_score_howto_table): Likewise.
* elf32-sh-relocs.h (R_SH_NONE): Likewise.
* elf32-spu.c (elf_howto_table): Likewise.
* elf32-tic6x.c (elf32_tic6x_howto_table): Likewise.
* elf32-tilepro.c (tilepro_elf_howto_table): Likewise.
* elf32-v850.c (v850_elf_howto_table): Likewise.
* elf32-vax.c (howto_table): Likewise.
* elf32-visium.c (visium_elf_howto_table): Likewise.
* elf32-xc16x.c (xc16x_elf_howto_table): Likewise.
* elf32-xgate.c (elf_xgate_howto_table): Likewise.
* elf32-xstormy16.c (xstormy16_elf_howto_table): Likewise.
* elf32-xtensa.c (elf_howto_table): Likewise.
* elf64-alpha.c (elf64_alpha_howto_table): Likewise.
* elf64-mips.c (mips_elf64_howto_table_rel): Likewise.
* elf64-mmix.c (elf_mmix_howto_table): Likewise.
* elf64-ppc.c (ppc64_elf_howto_raw): Likewise.
* elf64-s390.c (elf_howto_table): Likewise.
* elf64-sh64.c (sh_elf64_howto_table): Likewise.
* elf64-x86-64.c (x86_64_elf_howto_table): Likewise.
* elfn32-mips.c (elf_mips_howto_table_rel): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Likewise.
(elfNN_aarch64_howto_none): Likewise.
* elfxx-ia64.c (ia64_howto_table): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_howto_table): Likewise.
* elfxx-tilegx.c (tilegx_elf_howto_table): Likewise.
* nlm32-sparc.c (nlm32_sparc_howto_table): Likewise.
Joel Brobecker [Mon, 19 Jan 2015 07:51:05 +0000 (08:51 +0100)]
Fix ARI warning in rs6000-tdep.c::rs6000_gdbarch_init.
gdb/ChangeLog:
* rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
from end of line to start of next line.
GDB Administrator [Mon, 19 Jan 2015 00:00:10 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 18 Jan 2015 00:00:39 +0000 (00:00 +0000)]
Automatic date update in version.in
Wei-cheng Wang [Sat, 17 Jan 2015 06:30:59 +0000 (14:30 +0800)]
Skip-trampoline for PowerPC reverse-stepping.
Wei-cheng Wang [Sat, 17 Jan 2015 06:30:33 +0000 (14:30 +0800)]
Reverse debugging for PowerPC.
Wei-cheng Wang [Sat, 17 Jan 2015 06:29:16 +0000 (14:29 +0800)]
Epilogue unwinder for PowerPC.
GDB Administrator [Sat, 17 Jan 2015 00:00:10 +0000 (00:00 +0000)]
Automatic date update in version.in
Eli Zaretskii [Fri, 16 Jan 2015 17:55:40 +0000 (19:55 +0200)]
Really add a prototype for tui_rehighlight_all.
Sergio Durigan Junior [Fri, 16 Jan 2015 16:42:28 +0000 (11:42 -0500)]
Fix nat/linux-personality.c regression on RHEL-5
This commit fixes the regression on RHEL-5 systems introduced by
nat/linux-personality.c's check of HAVE_DECL_ADDR_NO_RANDOMIZE.
RHEL-5 systems define HAVE_DECL_ADDR_NO_RANDOMIZE as zero, so we
cannot use #ifndef; instead this patch uses the "#if !" construction.
The regression was reported by Ulrich Weigand here:
<https://sourceware.org/ml/gdb-patches/2015-01/msg00458.html>
gdb/ChangeLog
2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
* nat/linux-personality.c: Replace "#ifndef
HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
!HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
systems.
Eli Zaretskii [Fri, 16 Jan 2015 16:32:42 +0000 (18:32 +0200)]
Fix an erroneous commentary.
gdb/
2015-01-16 Eli Zaretskii <eliz@gnu.org>
* tui/tui-win.c (tui_set_tab_width_command): Fix the commentary.
Eli Zaretskii [Fri, 16 Jan 2015 16:24:16 +0000 (18:24 +0200)]
Make setting TUI border attributes take effect immediately
gdb/
2015-01-16 Eli Zaretskii <eliz@gnu.org>
* tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
functions.
(_initialize_tui_win) <border-kind, border-mode>:
<active-border-mode>: Use tui_set_var_cmd as the "set" function.
* tui/tui-win.h: Add prototype for tui_rehighlight_all.
Eli Zaretskii [Fri, 16 Jan 2015 15:46:12 +0000 (17:46 +0200)]
Make the change of tab size in TUI mode effective immediately
gdb/ChangeLog:
2015-01-16 Eli Zaretskii <eliz@gnu.org>
* tui/tui-win.c (tui_set_tab_width_command): Delete and
recreate the source and the disassembly windows, to show the
effect of the changed tab size immediately.
Eli Zaretskii [Fri, 16 Jan 2015 11:31:36 +0000 (13:31 +0200)]
Fix TUI-related documentation.
tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
Doc fix.
doc/gdb.texinfo (TUI Commands): Document the possible
values of NAME argument to 'winheight' command. Explain the
effect of 'tabset' setting better.
Andreas Krebbel [Fri, 16 Jan 2015 11:19:21 +0000 (12:19 +0100)]
S/390: Add support for IBM z13.
- 32 128 bit vector registers (overlapping with the existing 16 64 bit
floating point registers)
- vector double instructions
- vector integer instructions
- scalar vector instructions (allowing to have more floating point
registers for scalar operations)
- vector string instructions
gas/ChangeLog:
* config/tc-s390.c (struct pd_reg): Remove.
(pre_defined_registers): Remove.
(REG_NAME_CNT): Remove.
(reg_name_search): Calculate the register number instead of doing
a lookup.
(register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
reg_name_search signature.
(s390_parse_cpu): Support the new arch string z13.
(s390_insert_operand): Support for vector registers with the extra
field for the fifth bit of each vector register operand.
(md_gather_operand): Adjust to the new handling of optional
parameters.
* doc/as.texinfo: Document the z13 cpu string.
gas/testsuite/ChangeLog:
* gas/s390/esa-g5.d: Add a variant without the optional operand.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z10.d: For variants with a zero optional argument
it is not dumped by objdump anymore.
* gas/s390/zarch-zEC12.d: Likewise.
* gas/s390/zarch-z13.d: New file.
* gas/s390/zarch-z13.s: New file.
* gas/s390/s390.exp: Run the test for the z13 files.
include/opcode/ChangeLog:
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13.
ld/testsuite/ChangeLog:
* ld-s390/tlsbin.dd: The nopr register operand is optional and not
printed if 0 anymore.
opcodes/ChangeLog:
* s390-dis.c (s390_extract_operand): Support vector register
operands.
(s390_print_insn_with_opcode): Support new operands types and add
new handling of optional operands.
* s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
and include opcode/s390.h instead.
(struct op_struct): New field `flags'.
(insertOpcode, insertExpandedMnemonic): New parameter `flags'.
(dumpTable): Dump flags.
(main): Parse flags from the s390-opc.txt file. Add z13 as cpu
string.
* s390-opc.c: Add new operands types, instruction formats, and
instruction masks.
(s390_opformats): Add new formats for .insn.
* s390-opc.txt: Add new instructions.
Eli Zaretskii [Fri, 16 Jan 2015 11:24:20 +0000 (13:24 +0200)]
Leave more space in TUI mode for thread ID.
gdb/tui/tui-data.h (LINE_PREFIX): Make shorter
(MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
"Thread NNNNN.XXXX" thread ID notation on Windows.
Jan Kratochvil [Fri, 16 Jan 2015 05:39:47 +0000 (06:39 +0100)]
Fix gcc-5 compilation
With gcc-5.0 pre-release one gets:
hppa-tdep.c: In function ‘inst_saves_gr’:
hppa-tdep.c:1406:30: error: comparison of constant ‘9’ with boolean expression is always false [-Werror=bool-compare]
I find the misplaced parentheses obvious.
gdb/ChangeLog
2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix gcc-5 compilation.
* hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
GDB Administrator [Fri, 16 Jan 2015 00:00:12 +0000 (00:00 +0000)]
Automatic date update in version.in
Sergio Durigan Junior [Thu, 15 Jan 2015 20:10:49 +0000 (15:10 -0500)]
Move code to disable ASR to nat/
This patch moves the shared code present on
gdb/linux-nat.c:linux_nat_create_inferior and
gdb/gdbserver/linux-low.c:linux_create_inferior to
nat/linux-personality.c. This code is responsible for disabling
address space randomization based on user setting, and using
<sys/personality.h> to do that. I decided to put the prototype of the
maybe_disable_address_space_randomization on nat/linux-osdata.h
because it seemed the best place to put it.
I regression-tested this patch on Fedora 20 x86_64, and found no
regressions.
gdb/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
(linux-personality.o): New rule.
* common/common-defs.h: Include <stdint.h>.
* config/aarch64/linux.mh (NATDEPFILES): Include
linux-personality.o.
* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
* config/arm/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* config/i386/linux.mh (NATDEPFILES): Likewise.
* config/ia64/linux.mh (NATDEPFILES): Likewise.
* config/m32r/linux.mh (NATDEPFILES): Likewise.
* config/m68k/linux.mh (NATDEPFILES): Likewise.
* config/mips/linux.mh (NATDEPFILES): Likewise.
* config/pa/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
* config/s390/linux.mh (NATDEPFILES): Likewise.
* config/sparc/linux64.mh (NATDEPFILES): Likewise.
* config/sparc/linux.mh (NATDEPFILES): Likewise.
* config/tilegx/linux.mh (NATDEPFILES): Likewise.
* config/xtensa/linux.mh (NATDEPFILES): Likewise.
* defs.h: Remove #include <stdint.h> (moved to
common/common-defs.h).
* linux-nat.c: Include nat/linux-personality.h. Remove #include
<sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
nat/linux-personality.c).
(linux_nat_create_inferior): Remove code to disable address space
randomization (moved to nat/linux-personality.c). Create cleanup
to disable address space randomization.
* nat/linux-personality.c: New file.
* nat/linux-personality.h: Likewise.
gdb/gdbserver/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add linux-personality.c.
(linux-personality.o): New rule.
* configure.srv (srv_linux_obj): Add linux-personality.o to the
list of objects to be built.
* linux-low.c: Include nat/linux-personality.h.
(linux_create_inferior): Remove code to disable address space
randomization (moved to ../nat/linux-personality.c). Create
cleanup to disable address space randomization.
Sergio Durigan Junior [Thu, 15 Jan 2015 20:09:15 +0000 (15:09 -0500)]
Move safe_strerror to common/
This patch moves safe_strerror from the gdb/{posix,mingw}-hdep.c files
to the respective common/{posix,mingw}-strerror.c files. This is a
preparation for the next patch, which shares a common code (to disable
address space randomization when creating a new inferior).
The patch has been regtested on Fedora 20 x86_64, and no regressions
were found.
gdb/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
common/posix-strerror.c.
(posix-strerror.o): New rule.
(mingw-strerror.o): Likewise.
* common/common-utils.h (safe_strerror): Move prototype to here,
from utils.h.
* common/common.host: New file.
* common/mingw-strerror.c: Likewise.
* common/posix-strerror.c: Likewise.
* configure: Regenerated.
* configure.ac: Source common/common.host. Add variable
common_host_obs to gdb_host_obs.
* contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
gdb/common/posix-strerror.c when warning about the use of
strerror.
* mingw-hdep.c (safe_strerror): Remove definition; move it to
common/mingw-strerror.c.
* posix-hdep.c (safe_strerror): Remove definition; move it to
common/posix-hdep.c.
* utils.h (safe_strerror): Remove prototype; move to
common/common-utils.h.
gdb/gdbserver/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (posix-strerror.o): New rule.
(mingw-strerror.o): Likewise.
* configure: Regenerated.
* configure.ac: Source file ../common/common.host. Initialize new
variable srv_host_obs. Add srv_host_obs to GDBSERVER_DEPFILES.
H.J. Lu [Thu, 15 Jan 2015 19:06:33 +0000 (11:06 -0800)]
Don't complain about -fPIC for undefined symbol
When building executable, undefined symbol is a fatal error. We don't
complain about -fPIC if the symbol is undefined.
bfd/
PR ld/17847
* elf64-x86-64.c (elf_x86_64_relocate_section): Don't complain
about -fPIC if the symbol is undefined when building executable.
ld/testsuite/
PR ld/17847
* ld-x86-64/pie1.d: New file.
* ld-x86-64/pie1.s: Likwise.
* ld-x86-64/x86-64.exp: Run pie1.
Don Breazeal [Thu, 15 Jan 2015 18:47:31 +0000 (10:47 -0800)]
Skip two more attach tests when testing against stub-like targets
This patch updates two attach tests to use utility procs for checking if
the attach test should run and for launching the program to be attached, as
follows:
1) Use can_spawn_for_attach instead of is_remote target
2) Use spawn_wait_for_attach instead of exec/sleep
Tested (1) with i686-mingw32 host and i686-pc-linux-gnu build/target and
both with x86_64 Ubuntu.
gdb/testsuite/ChangeLog:
* gdb.base/attach-pie-noexec.exp: Use can_spawn_for_attach
instead of checking whether the target board is remote and
use spawn_wait_for_attach instead of exec/sleep.
* gdb.base/attach-twice.exp: Likewise.
Nick Clifton [Thu, 15 Jan 2015 16:22:55 +0000 (16:22 +0000)]
Fix memory access violations triggered by running objdump on fuzzed binaries.
PR binutils/17512
* elf-m10300.c (mn10300_info_to_howto): Replace assertion with an
error message. Never return an invalid howto pointer.
* elf32-cr16.c (cr16_info_to_howto): Likewise.
* elf32-crx.c (elf_crx_info_to_howto): Likewise.
* elf32-i370.c (i370_elf_info_to_howto): Likewise.
* elf32-mcore.c (mcore_elf_info_to_howto): Likewise.
* elf32-microblaze.c (microblaze_elf_info_to_howto): Likewise.
* elf32-mips.c (mips_elf32_rtype_to_howto): Likewise.
* elf32-pj.c (pj_elf_info_to_howto): Likewise.
* elf32-ppc.c (ppc_elf_info_to_howto): Likewise.
* elf32-spu.c (spu_elf_info_to_howto): Likewise.
* elf32-v850.c (v850_elf_info_to_howto_rela): Likewise.
* elf32-vax.c (rtype_to_howto): Likewise.
* elf64-alpha.c (elf64_alpha_info_to_howto): Likewise.
* elf64-mips.c (mips_elf64_rtype_to_howto): Likewise.
* elfn32-mips.c (sh_elf_info_to_howto): Likewise.
* elf32-sh.c (sh_elf_info_to_howto): Likewise.
(sh_elf_reloc): Check that the reloc is in range.
* reloc.c (bfd_perform_relocation): Check that the section is big
enough for the entire reloc.
(bfd_generic_get_relocated_section_contents): Report unexpected
return values from perform_reloc.
Nick Clifton [Thu, 15 Jan 2015 16:20:19 +0000 (16:20 +0000)]
Fixes a bug in the relaxation of R_MSP430X_ABS16 to R_MSP430_10_PCREL.
* elf32-msp430.c (msp430_elf_relax_section): Skip unhandled
relocs. Include PC-relative adjustment for R_MSP430X_ABS16
relaxation.
Alan Modra [Thu, 15 Jan 2015 08:37:33 +0000 (19:07 +1030)]
Omit section dynsyms for any linker created section
This is a simplification, and fixes a testcase I had where an empty
powerpc64 .branch_lt section was chosen for the data_index_section
dynamic symbol and thus wasn't removed.
* elflink.c (_bfd_elf_link_omit_section_dynsym): Return true for
any output section matching a linker created dynobj section.
Joel Brobecker [Thu, 15 Jan 2015 11:10:36 +0000 (15:10 +0400)]
Document the GDB 7.8.2 release in gdb/ChangeLog
gdb/ChangeLog:
GDB 7.8.2 released.
Alan Modra [Thu, 15 Jan 2015 09:12:59 +0000 (19:42 +1030)]
Fix ARM fail of gap test
ld-elf/gap test was failing due to the ARM backend attempting to output
arch symbols when ld -s (strip all symbols) is in force. This patch
stops that happening and tidies the code a little.
PR 17842
* elflink.c (elf_link_output_sym): Assert elf_onesymtab set.
(bfd_elf_final_link): Always create a symbol table when emit_relocs.
Don't assign symtab file position unless symbols will be output.
Merge blocks with condition in common. Don't call
elf_backend_output_arch_local_syms or elf_backend_output_arch_syms
unless other symbols are output. Move assignment of symtab_shndx
file position. Localize variable.
Joel Brobecker [Thu, 15 Jan 2015 06:09:32 +0000 (10:09 +0400)]
[Ada] 'first/'last/'length of array whose bound is a discriminant
Consider the following code:
type Table is array (Positive range <>) of Integer;
type Object (N : Integer) is record
Data : Table (1 .. N);
end record;
My_Object : Object := (N => 3, Data => (3, 5, 8));
Trying to print the range and length of the My_Object.Data array yields:
(gdb) print my_object.data'first
$1 = 1
(gdb) print my_object.data'last
$2 = 0
(gdb) print my_object.data'length
$3 = 0
The first one is correct, and that is thanks to the fact that
the lower bound is statically known. However, for the upper
bound, and consequently the array's length, the values are incorrect.
It should be:
(gdb) print my_object.data'last
$2 = 3
(gdb) print my_object.data'length
$3 = 3
What happens here is that ada_array_bound_from_type sees that
our array has a parallel "___XA" type, and therefore tries to
use it. In particular, it described our array's index type as:
[...]___XDLU_1__n, which means lower bound = 1, and upper bound
is value of "n". Unfortunately, ada_array_bound_from_type does
not have access to the discriminant, and is therefore unable to
compute the bound correctly.
Fortunately, at this stage, the bound has already been computed
a while ago, and therefore doesn't need to be re-computed here.
This patch fixes the issue by ignoring that ___XA type if the array
is marked as already fixed.
This also fixes the same issue with packed arrays.
gdb/ChangeLog:
* ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
___XA type if the array has already been fixed.
gdb/testsuite/ChangeLog:
* gdb.ada/var_arr_attrs: New testcase.
Joel Brobecker [Thu, 15 Jan 2015 03:14:45 +0000 (07:14 +0400)]
Build failure in sim/rx/gdb-if.c on windows
This should fix a build failure reported on x86_64-mingw32 by Daniel
Calcoen due to conflicting declarations of "open". This patch just
renames the static global in sim/rx/gdb-if.c into "rx_sim_is_open".
sim/rx/ChangeLog:
* gdb-if.c (open): Rename to...
(rx_sim_is_open): This. Replace all uses of "open" by uses of
"rx_sim_is_open" throughout.
Tested by rebuilding on x86_64-linux.
Anthony Green [Thu, 15 Jan 2015 00:08:12 +0000 (19:08 -0500)]
Don't disable gprof for moxie
GDB Administrator [Thu, 15 Jan 2015 00:00:13 +0000 (00:00 +0000)]
Automatic date update in version.in
Jan-Benedict Glaw [Wed, 14 Jan 2015 21:10:15 +0000 (22:10 +0100)]
Merge include/libiberty.h from GCC
This pulls in some missing prototypes and also adds corresponding entries
to the ChangeLog file. Please note that for one function, strverscmp(),
the ChangeLog entry was already there, but the actual prototype wasn't.
These ChangeLog entries are added:
2014-10-28 Yury Gribov <y.gribov@samsung.com>
* libiberty.h (strtol, strtoul, strtoll, strtoull): New prototypes.
2014-10-15 David Malcolm <dmalcolm@redhat.com>
* libiberty.h (choose_tmpdir): New prototype.
Jiong Wang [Wed, 14 Jan 2015 19:11:54 +0000 (19:11 +0000)]
[ARM] Reject R_ARM_REL32 when trying to defer it to runtime
bfd/
* elf32-arm.c (elf32_arm_final_link_relocate): Reject R_ARM_32/_NOI when
trying to defer them to runtime.
ld/testsuite/
* ld-arm/elf32-reject.s: New testcase.
* ld-arm/elf32-reject.d: Likewise.
* ld-arm/elf32-reject-pie.s: Likewise.
* ld-arm/elf32-reject-pie.d: Likewise.
* ld-arm/arm-elf.exp: Run new testcases.
* ld-arm/ifunc-7.s: Delete f2/f4 test items.
* ld-arm/ifunc-7.rd: Likewise.
* ld-arm/ifunc-7.gd: Likewise.
* ld-arm/ifunc-7.dd: Likewise.
* ld-arm/ifunc-8.s: Likewise.
* ld-arm/ifunc-8.rd: Likewise.
* ld-arm/ifunc-8.gd: Likewise.
* ld-arm/ifunc-8.dd: Likewise.
Cary Coutant [Wed, 14 Jan 2015 18:30:14 +0000 (10:30 -0800)]
Fix a bug in resolving HI16/LO16 relocation pairs for MIPS.
2015-01-14 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* mips.cc (reloc_high): Add r_sym.
(Mips_relocate_functions::relhi16): Add r_sym parameter. Pass r_sym to
reloc_high constructor.
(Mips_relocate_functions::relgot16_local): Likewise.
(Mips_relocate_functions::rello16): Add r_sym parameter. Use r_sym and
r_type to decide whether LO16 matches HI16.
(Target_mips::Relocate::relocate): Pass r_sym to calls to relhi16,
rello16 and relgot16_local.
Yao Qi [Fri, 28 Nov 2014 01:18:26 +0000 (09:18 +0800)]
Detect 64-bit-ness in PowerPC Book III-E
This patch is to teach both GDB and GDBServer to detect 64-bit inferior
correctly. We find a problem that GDBServer is unable to detect on a
e5500 core processor. Current GDBServer assumes that MSR is a 64-bit
register, but MSR is a 32-bit register in Book III-E. This patch is
to fix this problem by checking the right bit in MSR, in order to handle
both Book III-S and Book III-E. In order to detect Book III-S and
Book III-E, we check the PPC_FEATURE_BOOKE from the host's HWCAP (by
getauxval on glibc >= 2.16. If getauxval doesn't exist, we implement
the fallback by parsing /proc/self/auxv), because it should an invariant
on the same machine cross different processes.
In order to share code, I add nat/ppc-linux.c for both GDB and
GDBserver side.
gdb:
2015-01-14 Yao Qi <yao@codesourcery.com>
* Makefile.in (ppc-linux.o): New rule.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
* configure.ac: AC_CHECK_FUNCS(getauxval).
* config.in: Re-generated.
* configure: Re-generated.
* nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
Declare.
* nat/ppc-linux.c: New file.
* ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
Call ppc64_64bit_inferior_p.
gdb/gdbserver:
2015-01-14 Yao Qi <yao@codesourcery.com>
* Makefile.in (SFILES): Add nat/ppc-linux.c.
(ppc-linux.o): New rule.
* configure.srv (powerpc*-*-linux*): Add ppc-linux.o.
* configure.ac: AC_CHECK_FUNCS(getauxval).
* config.in: Re-generated.
* configure: Re-generated.
* linux-ppc-low.c (ppc_arch_setup) [__powerpc64__]: Call
ppc64_64bit_inferior_p
Yao Qi [Thu, 8 Jan 2015 09:23:55 +0000 (17:23 +0800)]
Move some ppc macros to nat/ppc-linux.h
When I use PPC_FEATURE_BOOKE in GDBserver, I find it is defined in GDB
but not in GDBserver. After taking a further look, I find some macros
are duplicated between ppc-linux-nat.c and linux-ppc-low.c, so this
patch is to move them into nat/ppc-linux.h.
gdb/gdbserver:
2015-01-14 Yao Qi <yao@codesourcery.com>
* linux-ppc-low.c: Include "nat/ppc-linux.h".
(PPC_FEATURE_HAS_VSX): Move to nat/ppc-linux.h.
(PPC_FEATURE_HAS_ALTIVEC, PPC_FEATURE_HAS_SPE): Likewise.
(PT_ORIG_R3, PT_TRAP): Likewise.
(PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
(PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
(PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
gdb:
2015-01-14 Yao Qi <yao@codesourcery.com>
* ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
nat/ppc-linux.h.
(PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
(PPC_FEATURE_HAS_DFP): Likewise.
(PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
(PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
(PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
Include "nat/ppc-linux.h".
* nat/ppc-linux.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
Pedro Alves [Mon, 12 Jan 2015 19:30:08 +0000 (19:30 +0000)]
PR17525 - breakpoint commands not executed when program run from -x script
Executing a gdb script that runs the inferior (from the command line
with -x), and has it hit breakpoints with breakpoint commands that
themselves run the target, is currently broken on async targets
(Linux, remote).
While we're executing a command list or a script, we force the
interpreter to be sync, which results in some functions nesting an
event loop and waiting for the target to stop, instead of returning
immediately and having the top level event loop handle the stop.
The issue with this bug is simply that bpstat_do_actions misses
checking whether the interpreter is sync. When we get here, in the
case of executing a script (or, when the interpreter is sync), the
program has already advanced to the next breakpoint, through
maybe_wait_sync_command_done. We need to process its breakpoints
immediately, just like with a sync target.
Tested on x86_64 Fedora 20.
gdb/
2015-01-14 Pedro Alves <palves@redhat.com>
PR gdb/17525
* breakpoint.c: Include "interps.h".
(bpstat_do_actions_1): Also check whether the interpreter is
async.
gdb/testsuite/
2015-01-14 Pedro Alves <palves@redhat.com>
Joel Brobecker <brobecker@adacore.com>
PR gdb/17525
* gdb.base/bp-cmds-execution-x-script.c: New file.
* gdb.base/bp-cmds-execution-x-script.exp: New file.
* gdb.base/bp-cmds-execution-x-script.gdb: New file.
Pedro Alves [Wed, 14 Jan 2015 11:51:06 +0000 (11:51 +0000)]
PR cli/17828: -batch -ex r breaks terminal
Commit
d3d4baed (PR python/17372 - Python hangs when displaying
help()) had the side effect of causing 'gdb -batch' to leave the
terminal in the wrong state if the program was run. E.g,.
$ echo 'main(){*(int*)0=0;}' | gcc -x c -; ./gdb/gdb -batch -ex r ./a.out
Program received signal SIGSEGV, Segmentation fault.
0x00000000004004ff in main ()
$
If you start typing the next command, seemingly nothing happens - GDB
left the terminal with echo disabled.
The issue is that that "r" ends up in fetch_inferior_event, which
calls reinstall_readline_callback_handler_cleanup, which causes
readline to prep the terminal (raw, echo disabled). But "-batch"
causes GDB to exit before the top level event loop is first started,
and then nothing de-preps the terminal.
The reinstall_readline_callback_handler_cleanup function's intro
comment mentions:
"Need to do this as we go back to the event loop, ready to process
further input."
but the implementation forgets the case of when the interpreter is
sync, which indicates we won't return to the event loop yet, or as in
the case of -batch, we have not started it yet.
The fix is to not install the readline callback in that case.
For the test, in this case, checking that command echo still works is
sufficient. Comparing stty output before/after running GDB is even
better. Because stty may not be available, the test tries both ways.
In any case, since expect's spawn (what we use to start gdb) creates a
new pseudo tty, another expect spawn or tcl exec after GDB exits would
not see the wrong terminal settings. So instead, the test spawns a
shell and runs stty and GDB in it.
Tested on x86_64 Fedora 20.
gdb/
2015-01-14 Pedro Alves <palves@redhat.com>
PR cli/17828
* infrun.c (reinstall_readline_callback_handler_cleanup): Don't
reinstall if the interpreter is sync.
gdb/testsuite/
2015-01-14 Pedro Alves <palves@redhat.com>
PR cli/17828
* gdb.base/batch-preserve-term-settings.c: New file.
* gdb.base/batch-preserve-term-settings.exp: New file.
Doug Evans [Wed, 14 Jan 2015 01:00:31 +0000 (17:00 -0800)]
Enhance gdb.lookup_objfile so that it works with a symlinked binary.
gdb/Changelog:
* objfiles.c (objfile_filename): New function.
* objfiles.h (objfile_filename): Declare it.
(objfile_name): Add function comment.
* python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
bfd file name (which may be realpath'd), and the original name.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Test gdb.lookup_objfile on symlinked
binary.
GDB Administrator [Wed, 14 Jan 2015 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
Jiong Wang [Tue, 13 Jan 2015 15:44:47 +0000 (15:44 +0000)]
[ARM] vcmp/vcmpe should accept #0x0 as an operand
gas/
2015-01-13 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (parse_ifimm_zero): Accept #0x0 as a synonym for
#0, restoring previous behaviour.
gas/testsuite/
2015-01-13 Matthew Wahab <matthew.wahab@arm.com>
* gas/arm/ual-vcmp.s: Add vcmp, vcmpe with #0x0 operand.
* gas/ual/vcmp.d: Update expected output.
* gas/ual/vcmp-zero-bad.l: Likewise
Joel Brobecker [Tue, 13 Jan 2015 14:59:32 +0000 (18:59 +0400)]
gdb/testsuite: Make clean mostlyclean should not delete *.py.
A sanity-check in my release scripts caught something: After having
created the tarballs, I verify that no checked-in file disappeared
in the process, and lo and behod, it found that the following file
got wiped:
- gdb/testsuite/dg-extract-results.py:
And it's not part of the tarball either.
I don't understand while we delete all *.py files in gdb/testsuite,
since I don't see a rule that expected to create one. A run of the
testsuite also doesn't seem to be creating .py files there.
I traced this to the following commit, which unfortunately provided
no explanation. Perhaps we used to run some tests in the gdb/testsuite
directory and caused files to be left behind there. Perhaps we still
do today?
In the meantime, Executive Decision: In order to allow me to create
tarballs without losing files, I removed it. It's easy to put something
back if we find out why it might still be needed.
gdb/testsuite/ChangeLog:
* Makefile.in (clean mostlyclean): Do not delete *.py.
Tested on x86_64-linux by running the src-release.sh script again,
and this time, dg-extract-results.py no longer gets wiped.
Joel Brobecker [Tue, 13 Jan 2015 12:24:45 +0000 (16:24 +0400)]
Update NEWS post GDB 7.9 branch creation.
gdb/ChangeLog:
* NEWS: Create a new section for the next release branch.
Rename the section of the current branch, now that it has
been cut.
Joel Brobecker [Tue, 13 Jan 2015 12:16:07 +0000 (16:16 +0400)]
Bump version to 7.9.50.DATE-cvs.
Now that the GDB 7.9 branch has been created, we can
bump the version number.
gdb/ChangeLog:
GDB 7.9 branch created (
92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
* version.in: Bump version to 7.9.50.DATE-cvs.
Jiong Wang [Tue, 13 Jan 2015 11:36:54 +0000 (11:36 +0000)]
[AArch64] Fix function pointer variable with -Bsymbolic-functions
bfd/ChangeLog
2015-01-13 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Use
SYMBOLIC_BIND to check if a symbol should be bound symbolically.
ld/testsuite/ChangeLog
2015-01-13 Thomas Preud'homme <thomas.preudhomme@arm.com>
* ld-aarch64/aarch64-elf.exp: Added relocs-257-symbolic-func test.
* ld-aarch64/relocs-257-symbolic-func.d: New file.
* ld-aarch64/relocs-257-symbolic-func.s: Likewise.
Jiong Wang [Tue, 13 Jan 2015 11:21:43 +0000 (11:21 +0000)]
[AArch64] Enable overflow check for TLSLE_MOVW_TPREL_G2
bfd/
* elfnn-aarch64.c: (elfNN_aarch64_howto_table): Enable overflow check for
TLSLE_MOVW_TPREL_G2.
ld/testsuite/
* ld-aarch64/tprel_g2_overflow.s: New testcase.
* ld-aarch64/tprel_g2_overflow.d: New expectation file.
* ld-aarch64/aarch64-elf.exp: Run new testcase.
Jiong Wang [Tue, 13 Jan 2015 11:18:10 +0000 (11:18 +0000)]
[AArch64] Enable overflow check for R_AARCH64_TLSLE_ADD_TPREL_HI12
bfd/
PR ld/17415
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Mark
R_AARCH64_TLSLE_ADD_TPREL_HI12 as complain_overflow_unsigned.
* elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Correct the bit
mask.
ld/testsuite/
PR ld/17415
* ld-aarch64/pr17415.s: Source file for new test.
* ld-aarch64/pr17415.d: Expect file for new test.
* ld-aarch64/aarch64-elf.exp: Run the new test.
Joel Brobecker [Tue, 13 Jan 2015 10:36:34 +0000 (14:36 +0400)]
[ARI] Remove trailing new-line in argument of call to warning.
gdb/ChangeLog:
* nat/linux-procfs.c (linux_proc_attach_tgid_threads):
Remove trailing new-line in argument of call to warning.
Joel Brobecker [Tue, 13 Jan 2015 10:35:49 +0000 (14:35 +0400)]
[ARI] Remove trailing new-line in argument of call to warning.
gdb/ChangeLog:
* linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
new-line in argument of call to "warning".
Joel Brobecker [Mon, 12 Jan 2015 11:46:34 +0000 (15:46 +0400)]
[python/Ada] gdb.lookup_type fails to looking primitive type
The following change...
commit
1994afbf19892c9e614a034fbf1a5233e9addce3
Date: Tue Dec 23 07:55:39 2014 -0800
Subject: Look up primitive types as symbols.
... caused the following regression:
% gdb
(gdb) set lang ada
(gdb) python print gdb.lookup_type('character')
Traceback (most recent call last):
File "<string>", line 1, in <module>
gdb.error: No type named character.
Error while executing Python code.
This is because the language_lookup_primitive_type_as_symbol call
was moved to the la_lookup_symbol_nonlocal hook. A couple of
implementations have been upated accordingly, but the Ada version
has not. This patch fixes this omission.
gdb/ChangeLog:
* ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
in static block, then try searching for primitive types.
gdb/testsuite/ChangeLog:
* gdb.python/py-lookup-type.exp: New file.
GDB Administrator [Tue, 13 Jan 2015 00:00:13 +0000 (00:00 +0000)]
Automatic date update in version.in
Patrick Palka [Mon, 12 Jan 2015 22:51:33 +0000 (17:51 -0500)]
Append to input history file instead of overwriting it
This patch makes readline append new history lines to the GDB history
file on exit instead of overwriting the entire history file on exit.
This change allows us to run multiple simultaneous GDB sessions without
having each session overwrite the added history of each other session on
exit.
Care must be taken to ensure that the history file doesn't get corrupted
when multiple GDB processes are trying to simultaneously append to and
then truncate it. Safety is achieved in such a situation by using an
intermediate local history file to mutually exclude multiple processes
from simultaneously performing write operations on the global history
file.
gdb/ChangeLog:
* top.h (gdb_add_history): Declare.
* top.c (command_count): New variable.
(gdb_add_history): New function.
(gdb_safe_append_history): New static function.
(quit_force): Call it.
(command_line_input): Use gdb_add_history instead of
add_history.
* event-top.c (command_line_handler): Likewise.
H.J. Lu [Mon, 12 Jan 2015 21:34:24 +0000 (13:34 -0800)]
Properly check abbrev size
abbrev_base is independent of abbrev_size. We should use abbrev_base +
abbrev_size to check abbrev section size.
* dwarf.c (process_debug_info): Properly check abbrev size.
Nick Clifton [Mon, 12 Jan 2015 17:28:55 +0000 (17:28 +0000)]
Another fix for memory access errors trigegred by running readelf on a corrupt binary.
PR binutils/17531
* dwarf.c (display_debug_addr): Use xcalloc to allocate the debug_addr_info
array. Check for an address_base that is too large.
James Clarke [Mon, 12 Jan 2015 17:13:54 +0000 (21:13 +0400)]
[darwin/gdb] Use <setjmp.h> instead of <machine/setjmp.h>
The `machine/setjmp.h' header is no longer present on OS X 10.10, and is
non-standard. Instead, `darwin-nat.c' should be using the standard
`setjmp.h' header.
gdb/ChangeLog:
2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
PR gdb/17046
* darwin-nat.c: Replace <machine/setjmp.h> #include by
<setjmp.h> #include.
Pedro Alves [Mon, 12 Jan 2015 17:10:06 +0000 (17:10 +0000)]
gdb.python/py-prompt.exp: restore GDBFLAGS
The previous change to py-prompt.exp made it return without restoring
GDBFLAGS, resulting in breaking the following tests:
$ make check RUNTESTFLAGS="--target_board=native-gdbserver --directory=gdb.python"
...
Running src/gdb/testsuite/gdb.python/py-prompt.exp ...
Running src/gdb/testsuite/gdb.python/py-section-script.exp ...
ERROR: (timeout) GDB never initialized after 10 seconds.
ERROR: no fileid for gdbuild
ERROR: Couldn't send python print ('test') to GDB.
ERROR: no fileid for gdbuild
ERROR: Couldn't send python print (sys.version_info[0]) to GDB.
ERROR: no fileid for gdbuild
ERROR: Couldn't send python print (sys.version_info[1]) to GDB.
ERROR: no fileid for gdbuild
ERROR: no fileid for gdbuild
...
gdb/testsuite/
2015-01-12 Pedro Alves <palves@redhat.com>
* gdb.python/py-prompt.exp: When the board can't spawn for attach,
restore GDBFLAGS before returning.
Nick Clifton [Mon, 12 Jan 2015 16:08:41 +0000 (16:08 +0000)]
More fixes for memory access errors when running readelf on fuzzed binaries.
PR binutils/17531
* dwarf.c (process_debug_info): Check for abbrev_base being larger
than the section size.
(process_cu_tu_index): Use xcalloc2 to allocate the CU and TU
arrays.
(xcalloc2): New function. Like xcalloc, but checks for overflow.
* dwarf.h (xcalloc2): Prototype.
Jan Beulich [Mon, 12 Jan 2015 14:24:20 +0000 (15:24 +0100)]
gas: allow labeling of CFI instructions
When runtime patching code (like e.g. done by the Linux kernel) there
may be cases where the set of stack frame alterations differs between
unpatched and patched code. Consequently the corresponding unwind data
needs patching too. Locating the right places within an FDE, however,
is rather cumbersome without a way to insert labels in the resulting
section. Hence this patch introduces a new directive, .cfi_label. Note
that with the way CFI data gets emitted currently (at the end of the
assembly process) this can't support local FB- and dollar-labels.
gas/
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/dw2gencfi.c (cfi_add_label, dot_cfi_label): New.
(cfi_pseudo_table): Add "cfi_label".
(output_cfi_insn): Handle CFI_label.
(select_cie_for_fde): Als terminate CIE when encountering
CFI_label.
* dw2gencfi.h (cfi_add_label): Declare.
(struct cfi_insn_data): New member "sym_name".
(CFI_label): New.
* read.c (read_symbol_name): Drop "static".
* read.h (read_symbol_name): Declare.
gas/testsuite/
2015-01-12 Jan Beulich <jbeulich@suse.com>
gas/cfi/cfi-label.d, gas/cfi/cfi-label.s: New.
gas/cfi/cfi.exp: Run new tests.
Terry Guo [Mon, 12 Jan 2015 11:00:00 +0000 (21:30 +1030)]
Fix GDB crash caused by discarding grouped debug sections
Keep a group containing just debug sections or the other special
sections we currently mark against garbage collection.
* elflink.c (_bfd_elf_gc_mark_debug_special_section_group): New
function.
(_bfd_elf_gc_mark_extra_sections): Use it.
Alan Modra [Mon, 12 Jan 2015 09:54:12 +0000 (20:24 +1030)]
Fix build without makeinfo from release binutils tar
PR 17817
* Makefile.am (aoutx.stamp): cp -p $srcdir/aoutx.texi to keep
timestamps so that makeinfo need not be installed.
(archive.stamp, archures.stamp, bfdt.stamp, cache.stamp,
coffcode.stamp, core.stamp, elf.stamp, elfcode.stamp, mmo.stamp,
format.stamp, libbfd.stamp, bfdio.stamp, bfdwin.stamp,
opncls.stamp, reloc.stamp, section.stamp, syms.stamp, targets.stamp,
init.stamp, hash.stamp, linker.stamp): Similarly.
(bfdver.texi): Use test rather than [ ] in commands.
* Makefile.in: Regenerate.
Jan Kratochvil [Mon, 12 Jan 2015 10:02:46 +0000 (11:02 +0100)]
[testsuite patch] Fix new FAIL: py-frame.exp: test Frame.read_register(rip)
for x86_64 -m32 run one gets:
+FAIL: gdb.python/py-frame.exp: test Frame.read_register(rip)
I do not have x32 OS here but the %rip test should PASS there I think.
On Sun, 11 Jan 2015 14:58:06 +0100, Yao Qi wrote:
With your patch applied, this test is skipped on 'x86_64 -m32'. I
prefer to increasing the test coverage, so how about extending the test
for 'x86_64 -m32'? I mean test Frame.read_register(eip)...
gdb/testsuite/ChangeLog
2015-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-frame.exp (test Frame.read_register(rip)): Use
is_amd64_regs_target and is_x86_like_target.
Jan Beulich [Mon, 12 Jan 2015 08:05:19 +0000 (09:05 +0100)]
arm: properly range check immediate operands of VSHL and VQSHL
These two, other than VQSHLU, didn't have their immediates properly range
checked so far.
(Re-sending unchanged from the original v2 due to never having got an
answer to https://sourceware.org/ml/binutils/2013-04/msg00121.html.)
gas/
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (do_neon_shl_imm): Check immediate range.
(do_neon_qshl_imm): Likewise.
gas/testsuite/
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/arm/neon-addressing-bad.s: Add test for invalid VSHL,
VQSHL, and VQSHLU immediates.
* gas/arm/neon-addressing-bad.l: Update accordingly.
Alan Modra [Sat, 10 Jan 2015 22:00:33 +0000 (08:30 +1030)]
Assorted compiler warning fixes
The C standard doesn't guarantee a function pointer can be cast to
void* and vice versa.
binutils/
* prdbg.c (print_debugging_info): Don't use void* for function
pointer param.
* budbg.h (print_debugging_info): Update prototype.
gas/
* read.c (s_altmacro, s_reloc): Make definition static.
Doug Evans [Mon, 12 Jan 2015 00:39:46 +0000 (16:39 -0800)]
dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
gdb/ChangeLog:
* dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
GDB Administrator [Mon, 12 Jan 2015 00:00:12 +0000 (00:00 +0000)]
Automatic date update in version.in
Doug Evans [Sun, 11 Jan 2015 23:45:43 +0000 (15:45 -0800)]
Require numeric attributes to specify the form.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (Dwarf): Flag an error if a numeric attribute value
is given without an explicit form.
* gdb.dwarf2/arr-subrange.exp: Specify forms for all numeric
attributes.
* gdb.dwarf/corrupt.exp: Ditto.
* gdb.dwarf2/enum-type.exp: Ditto.
* gdb.trace/entry-values.exp: Ditto.
* gdb.trace/unavailable-dwarf-piece.exp: Ditto.
Doug Evans [Sun, 11 Jan 2015 23:16:26 +0000 (15:16 -0800)]
Temporarily revert symbol lookup cache.
clear_symtab_users calls breakpoint_re_set before
observer_notify_new_objfile(NULL), and thus symbol lookup
done during breakpoint_re_set will see a stale cache.
Presumably we just need to move the call to observer_notify_new_objfile(NULL)
to before breakpoint_re_set, but need to check for other such issues,
and 7.9 is scheduled to branch tomorrow.
Reverts commits:
b2fb95e006c29e2cbe4b30523879fe3640f906ad
400678a494713abf8f7ea2367f213109a2c4b886
d98b9ccbccf36563dad92f6093a93655b38bc51b
77087adf50cedf78cc216ac6eb3b2863839d713c
gdb/ChangeLog:
* symtab.c (eq_symbol_entry): Use SYMBOL_SEARCH_NAME and
symbol_matches_domain for symbol comparisons.
* symtab.c (symbol_cache_mark_found): Improve function comment.
Rename parameter objfile to objfile_context.
(symbol_cache_mark_not_found): Improve function comment.
Add symbol lookup cache.
* NEWS: Document new options and commands.
* symtab.c (symbol_cache_key): New static global.
(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
(SYMBOL_LOOKUP_FAILED): New macro.
(symbol_cache_slot_state): New enum.
(block_symbol_cache): New struct.
(symbol_cache): New struct.
(new_symbol_cache_size, symbol_cache_size): New static globals.
(hash_symbol_entry, eq_symbol_entry): New functions.
(symbol_cache_byte_size, resize_symbol_cache): New functions.
(make_symbol_cache, free_symbol_cache): New functions.
(get_symbol_cache, symbol_cache_cleanup): New function.
(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
(symbol_cache_lookup, symbol_cache_clear_slot): New function.
(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
(symbol_cache_flush, symbol_cache_dump): New functions.
(maintenance_print_symbol_cache): New function.
(maintenance_flush_symbol_cache): New function.
(symbol_cache_stats): New function.
(maintenance_print_symbol_cache_statistics): New function.
(symtab_new_objfile_observer): New function.
(symtab_free_objfile_observer): New function.
(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
(_initialize_symtab): Init symbol_cache_key. New parameter
maint symbol-cache-size. New maint commands print symbol-cache,
print symbol-cache-statistics, flush-symbol-cache.
Install new_objfile, free_objfile observers.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new commands
"maint print symbol-cache", "maint print symbol-cache-statistics",
"maint flush-symbol-cache". Document new option
"maint set symbol-cache-size".
Doug Evans [Sun, 11 Jan 2015 22:06:34 +0000 (14:06 -0800)]
PR gdb/15830
gdb/ChangeLog:
PR gdb/15830
* NEWS: The "maint demangle" command is renamed as "demangle".
* demangle.c: #include cli/cli-utils.h, language.h.
(demangle_command): New function.
(_initialize_demangle): Add new command "demangle".
* maint.c (maintenance_demangle): Stub out.
(_initialize_maint_cmds): Update help text for "maint demangle",
and mark as deprecated.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging C Plus Plus): Mention "demangle".
(Symbols): Ditto.
(Maintenance Commands): Delete docs for "maint demangle".
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Remove references to "maint demangle".
* gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle".
Add tests for explicitly specifying language to demangle.
* gdb.dlang/demangle.exp: Ditto.
Mark Kettenis [Sun, 11 Jan 2015 21:16:11 +0000 (22:16 +0100)]
Fix build on OpenBSD.
gdb/ChangeLog:
* inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
inferior_thread is a function.
Doug Evans [Sun, 11 Jan 2015 20:02:23 +0000 (12:02 -0800)]
symtab.c (eq_symbol_entry): Use SYMBOL_SEARCH_NAME and symbol_matches_domain.
gdb/ChangeLog:
* symtab.c (eq_symbol_entry): Use SYMBOL_SEARCH_NAME and
symbol_matches_domain for symbol comparisons.
Doug Evans [Sun, 11 Jan 2015 19:40:41 +0000 (11:40 -0800)]
tweak previous entry
Doug Evans [Sun, 11 Jan 2015 19:36:36 +0000 (11:36 -0800)]
Improve comments for symbol_cache_mark_{not_,}found.
gdb/ChangeLog:
* symtab.c (symbol_cache_mark_found): Improve function comment.
Rename parameter objfile to objfile_context.
(symbol_cache_mark_not_found): Ditto.
H.J. Lu [Sun, 11 Jan 2015 16:04:27 +0000 (08:04 -0800)]
Only discard space for pc-relative relocs symbols
When building PIE, we should only discard space for pc-relative relocs
symbols which turn out to need copy relocs.
bfd/
PR ld/17827
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): For PIE,
only discard space for pc-relative relocs symbols which turn
out to need copy relocs.
ld/testsuite/
PR ld/17827
* ld-x86-64/pr17689.out: Updated.
* ld-x86-64/pr17689b.S: Likewise.
* ld-x86-64/pr17827.rd: New file.
* ld-x86-64/x86-64.exp: Run PR ld/17827 test.
Doug Evans [Sun, 11 Jan 2015 06:27:10 +0000 (22:27 -0800)]
Add symbol lookup cache.
gdb/ChangeLog:
Add symbol lookup cache.
* NEWS: Document new options and commands.
* symtab.c (symbol_cache_key): New static global.
(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
(SYMBOL_LOOKUP_FAILED): New macro.
(symbol_cache_slot_state): New enum.
(block_symbol_cache): New struct.
(symbol_cache): New struct.
(new_symbol_cache_size, symbol_cache_size): New static globals.
(hash_symbol_entry, eq_symbol_entry): New functions.
(symbol_cache_byte_size, resize_symbol_cache): New functions.
(make_symbol_cache, free_symbol_cache): New functions.
(get_symbol_cache, symbol_cache_cleanup): New function.
(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
(symbol_cache_lookup, symbol_cache_clear_slot): New function.
(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
(symbol_cache_flush, symbol_cache_dump): New functions.
(maintenance_print_symbol_cache): New function.
(maintenance_flush_symbol_cache): New function.
(symbol_cache_stats): New function.
(maintenance_print_symbol_cache_statistics): New function.
(symtab_new_objfile_observer): New function.
(symtab_free_objfile_observer): New function.
(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
(_initialize_symtab): Init symbol_cache_key. New parameter
maint symbol-cache-size. New maint commands print symbol-cache,
print symbol-cache-statistics, flush-symbol-cache.
Install new_objfile, free_objfile observers.
doc/ChangeLog:
* gdb.texinfo (Symbols): Document new commands
"maint print symbol-cache", "maint print symbol-cache-statistics",
"maint flush-symbol-cache". Document new option
"maint set symbol-cache-size".
GDB Administrator [Sun, 11 Jan 2015 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Joel Brobecker [Sat, 10 Jan 2015 05:50:44 +0000 (09:50 +0400)]
Fix use of wrong struct i387_xsave field in i387_cache_to_xsave
gdb/gdbserver/ChangeLog:
* i387-fp.c (i387_cache_to_xsave): In look over
num_avx512_zmmh_high_registers, replace use of struct i387_xsave
zmmh_low_space field by use of zmmh_high_space.
Tested on x86_64-linux, using boards/native-gdbserver.exp.
Andrew Burgess [Sun, 4 Jan 2015 00:03:16 +0000 (00:03 +0000)]
gas/avr: Prevent incorrect overflow errors for diff fixups.
When fixups are converted to a difference type within md_apply_fix, we
previously left the contents of VALP (the value that was initially
computed within write.c:fixup_segment) unchanged. This is harmless,
except that this value is used within write.c:fixup_segment once we
return from md_apply_fix to perform an overflow check.
In some cases, the value computed in write.c:fixup_segment is so wrong
that an overflow error can be triggered. These errors are incorrect.
This patch avoids the overflow errors by adjusting the value in
write.c:fixup_segment using the VALP pointer in md_apply_fix.
A test for this issue is included.
gas/ChangeLog:
* config/tc-avr.c (md_apply_fix): Update the contents of VALP for
diff fixups.
gas/testsuite/ChangeLog:
* gas/avr/large-debug-line-table.d: New file.
* gas/avr/large-debug-line-table.s: New file.
GDB Administrator [Sat, 10 Jan 2015 00:00:16 +0000 (00:00 +0000)]
Automatic date update in version.in
Cary Coutant [Fri, 9 Jan 2015 23:55:50 +0000 (15:55 -0800)]
Don't align start of segment unless alignment is larger than page size.
This fixes an issue where a page-aligned data section, combined with -z relro,
could lead to a gap between text and data segments larger than a page, and
we would fail to overlap the segments in the file.
gold/
* layout.cc (Layout::set_segment_offsets): Don't align start of segment
unless alignment is larger than page size.
Patrick Palka [Sun, 30 Nov 2014 16:47:16 +0000 (11:47 -0500)]
Don't munge yacc's #line directives
The #line directives within GDB's autogenerated yacc files (e.g.
c-exp.c) are being incorrectly munged, causing these directives to refer
to nonexistent source files, e.g.
#line 36 "/home/patrick/binutils-gdb/gdb//home/patrick/binutils-gdb/gdb/c-exp.y"
as opposed to
#line 36 "/home/patrick/binutils-gdb/gdb/c-exp.y"
The munging happens due to a sed expression added by commit
954d8cae
whose intended purpose[1] was to work around the fact that ylwrap emitted #line
directives without any directory information, e.g.
#line 36 "c-exp.y"
So the sed expression was meant to munge such directives to refer to
absolute paths instead. But the behavior of ylwrap was changed some
years ago[2] to emit absolute paths within #line directives. And when
our local copy of ylwrap was synced by commit
e30465112, the sed
expression in question became unnecessary, and indeed harmful.
This patch removes the now-obsolete sed expression. The emitted #line
directives are now correct without it.
gdb/ChangeLog:
* Makefile.in (.y.c): Don't munge yacc's #line
directives.
[1]: https://sourceware.org/ml/gdb-patches/2010-11/msg00265.html
[2]: http://git.savannah.gnu.org/cgit/automake.git/commit/lib/ylwrap?id=
b6359a5f3
Nick Clifton [Fri, 9 Jan 2015 21:56:30 +0000 (21:56 +0000)]
Fixes a bug in the previous delat to tekhex.c which meant that valid tekhex files were being rejected.
* tekhex.c (getvalue): Fix thinko in test for correct extraction
of value.
(getsym): Return false if there was not enough data to extract the
symbol.
Philipp Tomsich [Fri, 9 Jan 2015 20:00:14 +0000 (20:00 +0000)]
This patch adds the necessary support to the assembler to allow wiring
the X-Gene scheduling description up in the respective GCC backend.
* config/tc-arm.c (arm_cpus): Add support for APM X-Gene 1 and
X-Gene 2.
* doc/c-arm.texi (ARM Options): Mention xgene1 and xgene2.
Patrick Palka [Fri, 9 Jan 2015 18:27:56 +0000 (13:27 -0500)]
Consolidate the custom TUI query hook with the default query hook
This patch primarily rewrites defaulted_query() to use
gdb_readline_wrapper() to prompt the user for input, like
prompt_for_continue() does. The motivation for this rewrite is to be
able to reuse the default query hook in TUI, obviating the need for a
custom TUI query hook.
However, having TUI use the default query mechanism exposed a couple of
latent bugs in tui_redisplay_readline() related to the handling of
multi-line prompts, in particular GDB's multi-line quit prompt.
The first issue is an off-by-one error in the calculation of the height
of the prompt. The check in question should be col <= prev_col, not c <
prev_col, to properly account for the case when a prompt contains
multiple consecutive newlines. Failing to do so makes TUI have the
wrong idea of the vertical height of the prompt. This patch fixes the
column check.
The second issue is that cur_line does not get updated to reflect the
cursor position if the user's prompt cursor is at the end of the prompt
(i.e. if rl_point == rl_end). cur_line only gets updated if rl_point
lies between 0..rl_end-1 because that is the bounds of the for loop
responsible for updating cur_line. This patch changes the loop's bounds
to 0..rl_end so that cur_line always gets updated.
With these two bug fixes out of the way, the default query mechanism
works well in TUI even with multi-line prompts like GDB's quit prompt.
gdb/ChangeLog:
* utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
to prompt for input.
* tui/tui-hooks.c (tui_query_hook): Remove.
(tui_install_hooks): Don't set deprecated_query_hook.
* tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
height calculation. Always update the command window's cur_line.
Pedro Alves [Mon, 29 Dec 2014 19:41:07 +0000 (19:41 +0000)]
add non-stop test that stresses thread starvation issues
This commit adds a non-stop mode test originally inspired by
signal-while-stepping-over-bp-other-thread.exp, that exposes the
thread starvation issues fixed by the previous patches. It sets a set
of threads stepping in parallel, and has one of them get a signal.
Without the previous fixes, this would fail with timeouts.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/non-stop-fair-events.c: New file.
* gdb.threads/non-stop-fair-events.exp: New file.
Pedro Alves [Mon, 29 Dec 2014 19:41:07 +0000 (19:41 +0000)]
[gdbserver] linux-low.c: better starvation avoidance, handle non-stop mode too
This patch applies the same starvation avoidance improvements of the
previous patch to the Linux gdbserver side.
Without this, the test added by the following commit
(gdb.threads/non-stop-fair-events.exp) always fails with time outs.
gdb/gdbserver/
2015-01-09 Pedro Alves <palves@redhat.com>
* linux-low.c (step_over_bkpt): Move higher up in the file.
(handle_extended_wait): Don't store the stop_pc here.
(get_stop_pc): Adjust comments and rename to ...
(check_stopped_by_breakpoint): ... this. Record whether the LWP
stopped for a software breakpoint or hardware breakpoint.
(thread_still_has_status_pending_p): New function.
(status_pending_p_callback): Use
thread_still_has_status_pending_p. If the event is no longer
interesting, resume the LWP.
(handle_tracepoints): Add assert.
(maybe_move_out_of_jump_pad): Remove cancel_breakpoints call.
(wstatus_maybe_breakpoint): New function.
(cancel_breakpoint): Delete function.
(check_stopped_by_watchpoint): New function, factored out from
linux_low_filter_event.
(lp_status_maybe_breakpoint): Delete function.
(linux_low_filter_event): Remove filter_ptid argument.
Leave thread group exits pending here. Store the LWP's stop PC.
Always leave events pending.
(linux_wait_for_event_filtered): Pull all events out of the
kernel, and leave them all pending.
(count_events_callback, select_event_lwp_callback): Consider all
events.
(cancel_breakpoints_callback, linux_cancel_breakpoints): Delete.
(select_event_lwp): Only give preference to the stepping LWP in
all-stop mode. Adjust comments.
(ignore_event): New function.
(linux_wait_1): Delete 'retry' label. Use ignore_event. Remove
references to cancel_breakpoints. Adjust to renames. Also give
equal priority to all LWPs that have had events in non-stop mode.
If reporting a software breakpoint event, unadjust the LWP's PC.
(linux_wait): If linux_wait_1 returned an ignored event, retry.
(stuck_in_jump_pad_callback, move_out_of_jump_pad_callback):
Adjust.
(linux_resume_one_lwp): Store the LWP's PC. Adjust.
(resume_status_pending_p): Use thread_still_has_status_pending_p.
(linux_stopped_by_watchpoint): Adjust.
(linux_target_ops): Remove reference to linux_cancel_breakpoints.
* linux-low.h (enum lwp_stop_reason): New.
(struct lwp_info) <stop_pc>: Adjust comment.
<stopped_by_watchpoint>: Delete field.
<stop_reason>: New field.
* linux-x86-low.c (x86_linux_prepare_to_resume): Adjust.
* mem-break.c (software_breakpoint_inserted_here)
(hardware_breakpoint_inserted_here): New function.
* mem-break.h (software_breakpoint_inserted_here)
(hardware_breakpoint_inserted_here): Declare.
* target.h (struct target_ops) <cancel_breakpoints>: Remove field.
(cancel_breakpoints): Delete.
* tracepoint.c (clear_installed_tracepoints, stop_tracing)
(upload_fast_traceframes): Remove references to
cancel_breakpoints.
Pedro Alves [Wed, 7 Jan 2015 12:48:32 +0000 (12:48 +0000)]
linux-nat.c: better starvation avoidance, handle non-stop mode too
Running the testsuite with a series that reimplements user-visible
all-stop behavior on top of a target running in non-stop mode revealed
problems related to event starvation avoidance.
For example, I see
gdb.threads/signal-while-stepping-over-bp-other-thread.exp failing.
What happens is that GDB core never gets to see the signal event. It
ends up processing the events for the same threads over an over,
because Linux's waitpid(-1, ...) returns that first task in the task
list that has an event, starving threads on the tail of the task list.
So I wrote a non-stop mode test originally inspired by
signal-while-stepping-over-bp-other-thread.exp, to stress this
independently of all-stop on top of non-stop. Fixing it required the
changes described below. The test will be added in a following
commit.
1) linux-nat.c has code in place that picks an event LWP at random out
of all that have had events. This is because on the kernel side,
"waitpid(-1, ...)" just walks the task list linearly looking for the
first that had an event. But, this code is currently only used in
all-stop mode. So with a multi-threaded program that has multiple
events triggering debug events in parallel, GDB ends up starving some
threads.
To make the event randomization work in non-stop mode too, the patch
makes us pull out all the already pending events on the kernel side,
with waitpid, before deciding which LWP to report to the core.
There's some code in linux_wait that takes care of leaving events
pending if they were for LWPs the caller is not interested in. The
patch moves that to linux_nat_filter_event, so that we only have one
place that leaves events pending. With that in place, conceptually,
the flow is simpler and more normalized:
#1 - walk the LWP list looking for an LWP with a pending event to report.
#2 - if no pending event, pull events out of the kernel, and store
them in the LWP structures as pending.
#3- goto #1.
2) Then, currently the event randomization code only considers SIGTRAP
(or trap-like) events. That means that if e.g., have have multiple
threads stepping in parallel that hit a breakpoint that needs stepping
over, and one gets a signal, the signal may end up never getting
processed, because GDB will always be giving priority to the SIGTRAPs.
The patch fixes this by making the randomization code consider all
kinds of pending events.
3) If multiple threads hit a breakpoint, we report one of those, and
"cancel" the others. Cancelling means decrementing the PC, and
discarding the event. If the next time the LWP is resumed the
breakpoint is still installed, the LWP should hit it again, and we'll
report the hit then. The problem I found is that this delays threads
from advancing too much, with the kernel potentially ending up
scheduling the same threads over and over, and others not advancing.
So the patch switches away from cancelling the breakpoints, and
instead remembering that the LWP had stopped for a breakpoint. If on
resume the breakpoint is still installed, we report it. If it's no
longer installed, we discard the pending event then. This is actually
how GDBserver used to handle this before
d50171e4 (Teach linux
gdbserver to step-over-breakpoints), but with the difference that back
then we'd delay adjusting the PC until resuming, which made it so that
"info threads" could wrongly see threads with unadjusted PCs.
gdb/
2015-01-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (hardware_breakpoint_inserted_here_p): New
function.
* breakpoint.h (hardware_breakpoint_inserted_here_p): New
declaration.
* linux-nat.c (linux_nat_status_is_event): Move higher up in file.
(linux_resume_one_lwp): Store the thread's PC. Adjust to clear
stop_reason.
(check_stopped_by_watchpoint): New function.
(save_sigtrap): Reimplement.
(linux_nat_stopped_by_watchpoint): Adjust.
(linux_nat_lp_status_is_event): Delete.
(stop_wait_callback): Only call save_sigtrap after storing the
pending status.
(status_callback): If the thread had been stopped for a breakpoint
that has since been removed, discard the event and resume the LWP.
(count_events_callback, select_event_lwp_callback): Use
lwp_status_pending_p instead of linux_nat_lp_status_is_event.
(cancel_breakpoint): Rename to ...
(check_stopped_by_breakpoint): ... this. Record whether the LWP
stopped for a software breakpoint or hardware breakpoint.
(select_event_lwp): Only give preference to the stepping LWP in
all-stop mode. Adjust comments.
(stop_and_resume_callback): Remove references to new_pending_p.
(linux_nat_filter_event): Likewise. Leave exit events of the
leader thread pending here. Handle signal short circuiting here.
Only call save_sigtrap after storing the pending waitstatus.
(linux_nat_wait_1): Remove 'retry' label. Remove references to
new_pending. Don't handle leaving events the caller is not
interested in pending here, nor handle signal short-circuiting
here. Also give equal priority to all LWPs that have had events
in non-stop mode. If reporting a software breakpoint event,
unadjust the LWP's PC.
* linux-nat.h (enum lwp_stop_reason): New.
(struct lwp_info) <stop_pc>: New field.
(struct lwp_info) <stopped_by_watchpoint>: Delete field.
(struct lwp_info) <stop_reason>: New field.
* x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
Pedro Alves [Mon, 29 Dec 2014 19:41:06 +0000 (19:41 +0000)]
linux-nat.c: always mark execing LWP as resumed
A subsequent patch will make the Linux backend's target_wait method
pull all events out of the kernel (with waitpid) and store them as
pending status in the LWP structure if no pending status was already
available. Then, the backend goes over the pending statuses and pick
one to report to the core.
With that, the existing thread-execl.exp test exposes a bug, like:
(gdb) set scheduler-locking on
(gdb) PASS: gdb.threads/thread-execl.exp: schedlock on: set scheduler-locking on
next
FAIL: gdb.threads/thread-execl.exp: schedlock on: get to main in new image (timeout)
Recall that when the non-leader thread execs, all threads in the
process die, the execing thread changes its pid to the tgid, and then
waitpid returns an exec event to the tgid. If GDB didn't resume the
leader LWP, then GDB sees an event for an LWP that was supposedly
stopped, and thus not marked as resumed. Because the code that picks
a pending event to report to the core ignores not-resumed LWPs:
/* Return non-zero if LP has a wait status pending. */
static int
status_callback (struct lwp_info *lp, void *data)
{
/* Only report a pending wait status if we pretend that this has
indeed been resumed. */
if (!lp->resumed)
return 0;
the event ends up pending forever, thus the timeout.
gdb/
2015-01-09 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
Set the LWP's 'resumed' flag.
Pedro Alves [Wed, 7 Jan 2015 19:41:06 +0000 (19:41 +0000)]
linux-nat.c: clean up pending status checking and resuming LWPs
Whenever we resume an LWP, we must clear a few flags and flush the
LWP's register cache. We actually currently flush the register cache
of all LWPs, but that's unnecessary. This patch makes us flush the
register cache of only the LWP that is resumed. Instead of open
coding all that in many places, we use a helper function.
Likewise, we have two fields in the LWP structure where a pending
status may be recorded. Add a helper predicate that checks both and
use it throughout instead of open coding the checks.
gdb/
2015-01-09 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_resume_one_lwp): New function.
(resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
(linux_nat_resume): Use lwp_status_pending_p and
linux_resume_one_lwp.
(linux_handle_syscall_trap): Use linux_resume_one_lwp.
(linux_handle_extended_wait): Use linux_resume_one_lwp.
(status_callback, running_callback): Use lwp_status_pending_p.
(lwp_status_pending_p): New function.
(stop_and_resume_callback): Use lwp_status_pending_p.
(linux_nat_filter_event): Use linux_resume_one_lwp.
(linux_nat_wait_1): Always use status_callback to look for an LWP
with a pending status. Use linux_resume_one_lwp.
(resume_stopped_resumed_lwps): Use lwp_status_pending_p and
linux_resume_one_lwp.
Pedro Alves [Mon, 29 Dec 2014 19:41:05 +0000 (19:41 +0000)]
cleanup and speed up (software_)breakpoint_inserted_here_p
Factor out common code, and use the more efficient
ALL_BP_LOCATIONS_AT_ADDR.
gdb/
2015-01-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (bp_location_inserted_here_p): New function,
factored out from ...
(breakpoint_inserted_here_p): ... here. Use
ALL_BP_LOCATIONS_AT_ADDR.
(software_breakpoint_inserted_here_p): Use
bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
Pedro Alves [Mon, 29 Dec 2014 19:41:05 +0000 (19:41 +0000)]
watch_thread_num.exp and targets with fairer event reporting
This patch fixes the watch_thread_num.exp test to work when the target
is better at making event handling be fair among threads.
I wrote patches that make GDB native and GDBserver event handling
fairer between threads. That is, if threads A and B both
simultaneously trigger some debug event, GDB will pick either A or B
at random, rather than always handling the event of A first. There's
code for that in the Linux backends (gdb and gdbserver) already, but
it can be improved, and only works in all-stop mode.
With those fixes in place, I found that the watch_thread_num.exp would
often time out. The problem is that the test only works _because_
event handling isn't as fair as intended. With the fairness fixes,
the test falls victim of PR10116 (gdb drops watchpoints on
multi-threaded apps) quite often.
To expand on the PR10116 reference, consider that stop events are
serialized to GDB core, through target_wait. Say a thread-specific
watchpoint as set on thread A. When the "right" thread and some other
"wrong" thread both trigger a watchpoint simultaneously, the target
may report the "wrong" thread's hit to GDB first (thread B). When
handling that event, GDB notices the watchpoint is for another thread,
and so shouldn't cause a user-visible stop. On resume, GDB saves the
now current value of the watched expression. Afterwards, the "right"
thread (thread A) reports its watchpoint trigger. But the watched
value hasn't changed since GDB last saved it, and so GDB doesn't
report the watchpoint hit to the user.
The way the test is written, the watchpoint is associated with the
first thread that happens to report an event. It happens that GDB is
processing events much more often for one of the threads, which
usually will be that same first thread.
Hacking the test with "set debug infrun 1", we see exactly that:
$ grep "infrun.*\[Thread.*," testsuite/gdb.log | sort | uniq -c | sort -nr
70 infrun: 8798 [Thread 8798],
37 infrun: 8798 [Thread 8802],
36 infrun: 8798 [Thread 8804],
36 infrun: 8798 [Thread 8803],
35 infrun: 8798 [Thread 8805],
34 infrun: 8798 [Thread 8806],
The first column shows the number of times the target reported an
event for that thread, from:
infrun: target_wait (-1, status) =
infrun: 8798 [Thread 8798],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
This masks out the PR10116 issue.
However, if the target is better at giving equal priority to all
threads, the PR10116 issue happens often, so it may take quite a while
for the right thread to be the first to report its watchpoint event
just after the memory being watched really changed, resulting in test
time outs.
Here's the number of events handled for each thread on a gdbserver run
with the event fairness patches:
$ grep "infrun.*\[Thread.*," gdb.log | sort | uniq -c
2961 infrun: 13591 [Thread 13591],
2956 infrun: 13591 [Thread 13595],
2941 infrun: 13591 [Thread 13596],
2932 infrun: 13591 [Thread 13597],
2905 infrun: 13591 [Thread 13598],
2891 infrun: 13591 [Thread 13599],
Note how the number of events is much higher. The test routinely
takes over 10 seconds to finish on my machine rather than under a
second as with unpatched gdbserver, when it succeeds, but often it'll
fail with timeouts too.
So to make the test robust, this patch switches the tests to using
"awatch" instead of "watch", as access watchpoints don't care about
the watchpoint's "old value". With this, the test always finishes
quickly, and we can even bump the number of threads concurrently
writting to the shared variable, to have better assurance we're really
testing the case of the "wrong" thread triggering a watchpoint.
Here's the number of events I see for each thread on a run on my
machine, with a gdbserver patched with the event fairness series:
$ grep "infrun.*\[Thread.*," testsuite/gdb.log | sort | uniq -c
5 infrun: 5298 [Thread 5302],
4 infrun: 5298 [Thread 5303],
4 infrun: 5298 [Thread 5304],
4 infrun: 5298 [Thread 5305],
4 infrun: 5298 [Thread 5306],
4 infrun: 5298 [Thread 5307],
4 infrun: 5298 [Thread 5308],
4 infrun: 5298 [Thread 5309],
4 infrun: 5298 [Thread 5310],
4 infrun: 5298 [Thread 5311],
4 infrun: 5298 [Thread 5312],
4 infrun: 5298 [Thread 5313],
4 infrun: 5298 [Thread 5314],
4 infrun: 5298 [Thread 5315],
4 infrun: 5298 [Thread 5316],
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.base/annota1.exp (thread_test): Use srcfile and binfile from
the global scope. Set a breakpoint after all threads are started
rather than stepping over two source lines. Expect the prompt.
* gdb.base/watch_thread_num.c (threads_started_barrier): New
global.
(NUM): Now 15.
(main): Use threads_started_barrier to wait for all threads to
start. Main thread no longer calls thread_function. Exit after
180 seconds.
(loop): New function.
(thread_function): Wait on threads_started_barrier barrier. Call
'loop' at each iteration.
* gdb.base/watch_thread_num.exp: Continue to breakpoint after all
threads have started, instead of hardcoding number of "next"
steps. Use an access watchpoint instead of a write watchpoint.
Pedro Alves [Mon, 29 Dec 2014 19:41:04 +0000 (19:41 +0000)]
gdb.threads/{siginfo-thread.c,watchthreads-reorder.c,ia64-sigill.c} races with GDB
These three test all spawn a few threads and then send a SIGSTOP to
their parent GDB in order to pause it while the new threads set things
up for the test. With a GDB patch that changes the inferior thread's
scheduling a bit, I sometimes see:
FAIL: gdb.threads/siginfo-threads.exp: catch signal 0 (timeout)
...
FAIL: gdb.threads/watchthreads-reorder.exp: reorder1: continue a (timeout)
...
FAIL: gdb.threads/ia64-sigill.exp: continue (timeout)
...
The issue is that the test program stops GDB before it had a chance of
processing the new thread's clone event:
(gdb) PASS: gdb.threads/siginfo-threads.exp: get pid
continue
Continuing.
Stopping GDB PID 21541.
Waiting till the threads initialize their TIDs.
FAIL: gdb.threads/siginfo-threads.exp: catch signal 0 (timeout)
On Linux (at least), new threads start stopped, and the debugger must
resume them. The fix is to make the test program wait for the new
threads to be running before stopping GDB.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/ia64-sigill.c (threads_started_barrier): New global.
(thread_func): Wait on barrier.
(main): Wait for all threads to start before stopping GDB.
* gdb.threads/siginfo-threads.c (threads_started_barrier): New
global.
(thread1_func, thread2_func): Wait on barrier.
(main): Wait for all threads to start before stopping GDB.
* gdb.threads/watchthreads-reorder.c (threads_started_barrier):
New global.
(thread1_func, thread2_func): Wait on barrier.
(main): Wait for all threads to start before stopping GDB.
Anthony Green [Fri, 9 Jan 2015 12:12:37 +0000 (07:12 -0500)]
Use official ELF machine number for moxie
Pedro Alves [Wed, 17 Dec 2014 20:40:05 +0000 (20:40 +0000)]
Test attaching to a program that constantly spawns short-lived threads
Before the previous fixes, on Linux, this would trigger several
different problems, like:
[New LWP 27106]
[New LWP 27047]
warning: unable to open /proc file '/proc/-1/status'
[New LWP 27813]
[New LWP 27869]
warning: Can't attach LWP 11962: No child processes
Warning: couldn't activate thread debugging using libthread_db: Cannot find new threads: debugger service failed
warning: Unable to find libthread_db matching inferior's thread library, thread debugging will not be available.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/attach-many-short-lived-threads.c: New file.
* gdb.threads/attach-many-short-lived-threads.exp: New file.
Pedro Alves [Tue, 16 Dec 2014 16:12:25 +0000 (16:12 +0000)]
Linux: Skip thread_db thread event reporting if PTRACE_EVENT_CLONE is supported
[A test I wrote stumbled on a libthread_db issue related to thread
event breakpoints. See glibc PR17705:
[nptl_db: stale thread create/death events if debugger detaches]
https://sourceware.org/bugzilla/show_bug.cgi?id=17705
This patch avoids that whole issue by making GDB stop using thread
event breakpoints in the first place, which is good for other reasons
as well, anyway.]
Before PTRACE_EVENT_CLONE (Linux 2.6), the only way to learn about new
threads in the inferior (to attach to them) or to learn about thread
exit was to coordinate with the inferior's glibc/runtime, using
libthread_db. That works by putting a breakpoint at a magic address
which is called when a new thread is spawned, or when a thread is
about to exit. When that breakpoint is hit, all threads are stopped,
and then GDB coordinates with libthread_db to read data structures out
of the inferior to learn about what happened. Then the breakpoint is
single-stepped, and then all threads are re-resumed. This isn't very
efficient (stops all threads) and is more fragile (inferior's thread
list in memory may be corrupt; libthread_db bugs, etc.) than ideal.
When the kernel supports PTRACE_EVENT_CLONE (which we already make use
of), there's really no need to use libthread_db's event reporting
mechanism to learn about new LWPs. And if the kernel supports that,
then we learn about LWP exits through regular WIFEXITED wait statuses,
so no need for the death event breakpoint either.
GDBserver has been likewise skipping the thread_db events for a long
while:
https://sourceware.org/ml/gdb-patches/2007-10/msg00547.html
There's one user-visible difference: we'll no longer print about
threads being created and exiting while the program is running, like:
[Thread 0x7ffff7dbb700 (LWP 30670) exited]
[New Thread 0x7ffff7db3700 (LWP 30671)]
[Thread 0x7ffff7dd3700 (LWP 30667) exited]
[New Thread 0x7ffff7dab700 (LWP 30672)]
[Thread 0x7ffff7db3700 (LWP 30671) exited]
[Thread 0x7ffff7dcb700 (LWP 30668) exited]
This is exactly the same behavior as when debugging against remote
targets / gdbserver. I actually think that's a good thing (and as
such have listed this in the local/remote parity wiki page a while
ago), as the printing slows down the inferior. It's also a
distraction to keep bothering the user about short-lived threads that
she won't be able to interact with anyway. Instead, the user (and
frontend) will be informed about new threads that currently exist in
the program when the program next stops:
(gdb) c
...
* ctrl-c *
[New Thread 0x7ffff7963700 (LWP 7797)]
[New Thread 0x7ffff796b700 (LWP 7796)]
Program received signal SIGINT, Interrupt.
[Switching to Thread 0x7ffff796b700 (LWP 7796)]
clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:81
81 testq %rax,%rax
(gdb) info threads
A couple of tests had assumptions on GDB thread numbers that no longer
hold.
Tested on x86_64 Fedora 20.
gdb/
2014-01-09 Pedro Alves <palves@redhat.com>
Skip enabling event reporting if the kernel supports
PTRACE_EVENT_CLONE.
* linux-thread-db.c: Include "nat/linux-ptrace.h".
(thread_db_use_events): New function.
(try_thread_db_load_1): Check thread_db_use_events before enabling
event reporting.
(update_thread_state): New function.
(attach_thread): Use it. Check thread_db_use_events before
enabling event reporting.
(thread_db_detach): Check thread_db_use_events before disabling
event reporting.
(find_new_threads_callback): Check thread_db_use_events before
enabling event reporting. Update the thread's state if not using
libthread_db events.
gdb/testsuite/
2014-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/fork-thread-pending.exp: Switch to the main thread
instead of to thread 2.
* gdb.threads/signal-command-multiple-signals-pending.c (main):
Add barrier around each pthread_create call instead of around all
calls.
* gdb.threads/signal-command-multiple-signals-pending.exp (test):
Set a break on thread_function and have the child threads hit it
one at at a time.
Pedro Alves [Tue, 16 Dec 2014 16:12:24 +0000 (16:12 +0000)]
libthread_db: Skip attaching to terminated and joined threads
I wrote a test that attaches to a program that constantly spawns
short-lived threads, which exposed several issues. This is one of
them.
On GNU/Linux, attaching to a multi-threaded program sometimes prints
out warnings like:
...
[New LWP 20700]
warning: unable to open /proc file '/proc/-1/status'
[New LWP 20850]
[New LWP 21019]
...
That happens because when a thread exits, and is joined, glibc does:
nptl/pthread_join.c:
pthread_join ()
{
...
if (__glibc_likely (result == 0))
{
/* We mark the thread as terminated and as joined. */
pd->tid = -1;
...
/* Free the TCB. */
__free_tcb (pd);
}
So if we attach or interrupt the program (which does an implicit "info
threads") at just the right (or rather, wrong) time, we can find and
return threads in the libthread_db/pthreads thread list with kernel
thread ID -1. I've filed glibc PR nptl/17707 for this. You'll find
more info there.
This patch handles this as a special case in GDB.
This is actually more than just a cosmetic issue. lin_lwp_attach_lwp
will think that this -1 is an LWP we're not attached to yet, and after
failing to attach will try to check we were already attached to the
process, using a waitpid call, which in this case ends up being
"waitpid (-1, ...", which obviously results in GDB potentially
discarding an event when it shouldn't...
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/gdbserver/
2015-01-09 Pedro Alves <palves@redhat.com>
* thread-db.c (find_new_threads_callback): Ignore thread if the
kernel thread ID is -1.
gdb/
2015-01-09 Pedro Alves <palves@redhat.com>
* linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
about to wait for is > 0.
* linux-thread-db.c (find_new_threads_callback): Ignore thread if
the kernel thread ID is -1.
Pedro Alves [Tue, 16 Dec 2014 16:12:24 +0000 (16:12 +0000)]
Linux: on attach, attach to lwps listed under /proc/$pid/task/
... instead of relying on libthread_db.
I wrote a test that attaches to a program that constantly spawns
short-lived threads, which exposed several issues. This is one of
them.
On Linux, we need to attach to all threads of a process (thread group)
individually. We currently rely on libthread_db to list the threads,
but that is problematic, because libthread_db relies on reading data
structures out of the inferior (which may well be corrupted). If
threads are being created or exiting just while we try to attach, we
may trip on inconsistencies in the inferior's thread list. To work
around that, when we see a seemingly corrupt list, we currently retry
a few times:
static void
thread_db_find_new_threads_2 (ptid_t ptid, int until_no_new)
{
...
if (until_no_new)
{
/* Require 4 successive iterations which do not find any new threads.
The 4 is a heuristic: there is an inherent race here, and I have
seen that 2 iterations in a row are not always sufficient to
"capture" all threads. */
...
That heuristic may well fail, and when it does, we end up with threads
in the program that aren't under GDB's control. That's obviously bad
and results in quite mistifying failures, like e.g., the process dying
for seeminly no reason when a thread that wasn't attached trips on a
breakpoint.
There's really no reason to rely on libthread_db for this nowadays
when we have /proc mounted. In that case, which is the usual case, we
can list the LWPs from /proc/PID/task/. In fact, GDBserver is already
doing this. The patch factors out that code that knows to walk the
task/ directory out of GDBserver, and makes GDB use it too.
Like GDBserver, the patch makes GDB attach to LWPs and _not_ wait for
them to stop immediately. Instead, we just tag the LWP as having an
expected stop. Because we can only set the ptrace options when the
thread stops, we need a new flag in the lwp structure to keep track of
whether we've already set the ptrace options, just like in GDBserver.
Note that nothing issues any ptrace command to the threads between the
PTRACE_ATTACH and the stop, so this is safe (unlike one scenario
described in gdbserver's linux-low.c).
When we attach to a program that has threads exiting while we attach,
it's easy to race with a thread just exiting as we try to attach to
it, like:
#1 - get current list of threads
#2 - attach to each listed thread
#3 - ooops, attach failed, thread is already gone
As this is pretty normal, we shouldn't be issuing a scary warning in
step #3.
When #3 happens, PTRACE_ATTACH usually fails with ESRCH, but sometimes
we'll see EPERM as well. That happens when the kernel still has the
thread in its task list, but the thread is marked as dead.
Unfortunately, EPERM is ambiguous and we'll get it also on other
scenarios where the thread isn't dead, and in those cases, it's useful
to get a warning. To distiguish the cases, when we get an EPERM
failure, we open /proc/PID/status, and check the thread's state -- if
the /proc file no longer exists, or the state is "Z (Zombie)" or "X
(Dead)", we ignore the EPERM error silently; otherwise, we'll warn.
Unfortunately, there seems to be a kernel race here. Sometimes I get
EPERM, and then the /proc state still indicates "R (Running)"... If
we wait a bit and retry, we do end up seeing X or Z state, or get an
ESRCH. I thought of making GDB retry the attach a few times, but even
with a 500ms wait and 4 retries, I still see the warning sometimes. I
haven't been able to identify the kernel path that causes this yet,
but in any case, it looks like a kernel bug to me. As this just
results failure to suppress a warning that we've been printing since
about forever anyway, I'm just making the test cope with it, and issue
an XFAIL.
gdb/gdbserver/
2015-01-09 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_attach_fail_reason_string): Move to
nat/linux-ptrace.c, and rename.
(linux_attach_lwp): Update comment.
(attach_proc_task_lwp_callback): New function.
(linux_attach): Adjust to rename and use
linux_proc_attach_tgid_threads.
(linux_attach_fail_reason_string): Delete declaration.
gdb/
2015-01-09 Pedro Alves <palves@redhat.com>
* linux-nat.c (attach_proc_task_lwp_callback): New function.
(linux_nat_attach): Use linux_proc_attach_tgid_threads.
(wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
ptrace option flags.
* linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
field.
* nat/linux-procfs.c: Include <dirent.h>.
(linux_proc_get_int): New parameter "warn". Handle it.
(linux_proc_get_tgid): Adjust.
(linux_proc_get_tracerpid): Rename to ...
(linux_proc_get_tracerpid_nowarn): ... this.
(linux_proc_pid_get_state): New function, factored out from
(linux_proc_pid_has_state): ... this. Add new parameter "warn"
and handle it.
(linux_proc_pid_is_gone): New function.
(linux_proc_pid_is_stopped): Adjust.
(linux_proc_pid_is_zombie_maybe_warn)
(linux_proc_pid_is_zombie_nowarn): New functions.
(linux_proc_pid_is_zombie): Use
linux_proc_pid_is_zombie_maybe_warn.
(linux_proc_attach_tgid_threads): New function.
* nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
(linux_proc_get_tracerpid): Rename to ...
(linux_proc_get_tracerpid_nowarn): ... this, and update comment.
(linux_proc_pid_is_gone): New declaration.
(linux_proc_pid_is_zombie): Update comment.
(linux_proc_pid_is_zombie_nowarn): New declaration.
(linux_proc_attach_lwp_func): New typedef.
(linux_proc_attach_tgid_threads): New declaration.
* nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
use nowarn functions.
(linux_ptrace_attach_fail_reason_string): Move here from
gdbserver/linux-low.c and rename.
(ptrace_supports_feature): If the current ptrace options are not
known yet, check them now, instead of asserting.
* nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
Declare.
Pedro Alves [Tue, 16 Dec 2014 16:12:23 +0000 (16:12 +0000)]
libthread_db: debug output should go to gdb_stdlog
Some debug output in linux-thread-db.c was being sent to gdb_stdout,
and some to gdb_stderr, while the right place to send debug output to is
gdb_stdlog.
gdb/
2015-01-09 Pedro Alves <palves@redhat.com>
* linux-thread-db.c (thread_db_find_new_threads_silently)
(try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
(find_new_threads_once): Print debug output on gdb_stdlog.
Pedro Alves [Fri, 9 Jan 2015 11:04:19 +0000 (11:04 +0000)]
skip "attach" tests when testing against stub-like targets
We already skip "attach" tests if the target board is remote, in
dejagnu's sense, as we use TCL's exec to spawn the program on the
build machine. We should also skip these tests if testing with
"target remote" or other stub-like targets where "attach" doesn't make
sense.
Add a helper procedure that centralizes the checks a test that needs
to spawn a program for testing "attach" and make all test files that
use spawn_wait_for_attach check it.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (can_spawn_for_attach): New procedure.
(spawn_wait_for_attach): Error out if can_spawn_for_attach returns
false.
* gdb.base/attach.exp: Use can_spawn_for_attach instead of
checking whether the target board is remote.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
tests that need to attach, instead of checking whether the target
board is remote at the top of the file.
This page took 0.056943 seconds and 4 git commands to generate.