Tom Tromey [Sat, 2 Mar 2019 19:05:57 +0000 (12:05 -0700)]
Remove minsym termination
I was curious what used the terminating "null" minimal symbol; and
after looking I could not find anything. This patch removes
terminate_minimal_symbol_table and the extra minimal symbol that is
allocated for it.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* symfile.c (reread_symbols): Update.
* objfiles.c (objfile::objfile): Update.
* minsyms.h (terminate_minimal_symbol_table): Don't declare.
* minsyms.c (lookup_minimal_symbol_by_pc_section): Update
comment.
(minimal_symbol_reader::install): Update.
(terminate_minimal_symbol_table): Remove.
* jit.c (jit_object_close_impl): Update.
Tom Tromey [Sat, 2 Mar 2019 02:56:45 +0000 (19:56 -0700)]
Remove some unneeded initializations in minimal_symbol_reader
minimal_symbol_reader::record_full does not need to initialize any
minsym fields to 0, because that was already done implicitly via the
use of XCNEW when allocating the msym_bunch.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* minsyms.c (minimal_symbol_reader::record_full): Remove some
initializations.
Tom Tromey [Sat, 2 Mar 2019 02:55:46 +0000 (19:55 -0700)]
Use bitset for demangled_hash_languages
I noticed that objfile_per_bfd_storage::demangled_hash_languages is a
std::vector, which seemed quite large for something that,
fundamentally, can be represented as a bitset. This patch
reimplements it as a std::bitset.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* objfiles.h (struct objfile_per_bfd_storage)
<demangled_hash_languages>: Now a bitset.
* minsyms.c (add_minsym_to_demangled_hash_table): Update.
(lookup_minimal_symbol): Update.
Tom Tromey [Sat, 2 Mar 2019 00:37:30 +0000 (17:37 -0700)]
Slightly simplify minsym creation
Only one caller of minimal_symbol_reader::record_with_info was using
the return value, so this patch simplifies this code by having it
return void and changing that caller to use record_full instead.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* minsyms.h (class minimal_symbol_reader) <record_with_info>:
Don't return the symbol.
* coffread.c (record_minimal_symbol): Use record_full.
H.J. Lu [Fri, 15 Mar 2019 14:19:01 +0000 (22:19 +0800)]
COFF: Check for symbols defined in discarded section
For LTO, a symbol may defined in discarded section. We should mark it
as undefined so that LTO plugin will make IR definition available.
PR ld/24267
* coffgen.c (_bfd_coff_section_already_linked): Skip discarded
section.
* cofflink.c (coff_link_add_symbols): Check for symbols defined
in discarded section.
Nick Clifton [Fri, 15 Mar 2019 12:08:56 +0000 (12:08 +0000)]
Update the documentation describing where the linker will attempt to locate plugins.
PR 24262
* ld.texi (-plugin): Correct the path used to locate linker
plugins.
Li Hao [Fri, 15 Mar 2019 11:58:05 +0000 (11:58 +0000)]
Fix a potential illegal memory access whilt parsing an x86 insn.
PR 24308
* config/tc-i386.c (parse_insn): Check mnemp before using it to
determine if a suffix can be trimmed.
Alan Modra [Fri, 15 Mar 2019 06:19:59 +0000 (16:49 +1030)]
PR24339, segfault on NULL symbol section
PR 24339
* elflink.c (elf_link_add_object_symbols): Bail out on a local
symbol after globals if elf_bad_symtab is not set.
Alan Modra [Fri, 15 Mar 2019 06:19:42 +0000 (16:49 +1030)]
PR24337, segfault in _bfd_elf_rela_local_sym
PR 24337
* elf.c (_bfd_elf_rela_local_sym): Don't segfault on NULL sec.
(_bfd_elf_rel_local_sym): Likewise.
Alan Modra [Fri, 15 Mar 2019 05:19:27 +0000 (15:49 +1030)]
PR24336, buffer overflow in swap_reloca_in
PR 24336
* elflink.c (elf_link_read_relocs_from_section): Handle fuzzed
object files with sh_size not a multiple of sh_entsize.
H.J. Lu [Fri, 15 Mar 2019 07:46:12 +0000 (15:46 +0800)]
x86-64: Check for corrupt input with bad relocation
PR ld/24338
* elf64-x86-64.c (elf_x86_64_relocate_section): Check for corrupt
input with bad relocation.
H.J. Lu [Fri, 15 Mar 2019 06:43:36 +0000 (14:43 +0800)]
Re-indent elf_x86_64_relocate_section
* elf64-x86-64.c (elf_x86_64_relocate_section): Re-indent.
GDB Administrator [Fri, 15 Mar 2019 00:00:25 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Thu, 14 Mar 2019 19:04:10 +0000 (15:04 -0400)]
Fix gdb.texinfo build
Commit
b4be1b064860 ("Fix MI output for multi-location breakpoints")
broke the build of gdb.texinfo. The problem is simply the use of "@end
@table", which should be "@end table".
The error was:
/home/smarchi/src/binutils-gdb/gdb/doc/gdb.texinfo:27870: warning: @table should not appear in @end
/home/smarchi/src/binutils-gdb/gdb/doc/gdb.texinfo:27870: table requires an argument: the formatter for @item
/home/smarchi/src/binutils-gdb/gdb/doc/gdb.texinfo:27870: no matching `@end table'
/home/smarchi/src/binutils-gdb/gdb/doc/gdb.texinfo:27870: bad argument to @end: @table
/home/smarchi/src/binutils-gdb/gdb/doc/gdb.texinfo:27867: warning: @table has text but no @item
/home/smarchi/src/binutils-gdb/gdb/doc/gdb.texinfo:27879: @node seen before @end table
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Development and Front Ends): Fix closing
of table, "@end @table" -> "@end table".
Nick Clifton [Thu, 14 Mar 2019 17:21:41 +0000 (17:21 +0000)]
Fix a buffer overrun error when attempting to parse corrupt DWARF information.
PR 24334
* dwarf2.c (struct dwarf2_debug): Add sec_vma_count field.
(save_section_vma): Initialise field to the number of entries in
the sec_vma table.
(section_vma_same): Check that the number of entries in the
sec_vma table matches the number of sections in the bfd.
Nick Clifton [Thu, 14 Mar 2019 16:03:07 +0000 (16:03 +0000)]
Fix an illegal memory access when parsing a corrupt ELF file.
PR 24333
* elflink.c (_bfd_elf_add_default_symbol): Add a check for a NULL
section owner pointer when adding the default symbol.
Eli Zaretskii [Thu, 14 Mar 2019 15:31:38 +0000 (17:31 +0200)]
Fix colors in TUI mode in MS-Windows build with ncurses
The MS-Windows port of ncurses fails to switch to a color pair if
one or both of the colors are the implicit default colors. This
change records the default colors when TUI is initialized, and
then specifies them explicitly when a color pair uses the default
colors. This allows color styling in TUI mode on MS-Windows.
gdb/ChangeLog:
2019-03-14 Eli Zaretskii <eliz@gnu.org>
* tui/tui-io.c [__MINGW32__]: Include windows.h. Declare
ncurses_norm_attr.
(tui_initialize_io) [__MINGW32__]: Record the default terminal
colors in ncurses_norm_attr.
(apply_ansi_escape) [__MINGW32__]: If a color in a color pair is
"none", replace it with the default color recorded in
ncurses_norm_attr.
Nick Clifton [Thu, 14 Mar 2019 14:45:32 +0000 (14:45 +0000)]
Fix illegal memory access parsing a corrupt ELF file.
PR 24332
* elflink.c (elf_link_add_object_symbols): Add new local variable
extversym_end. Initialise it to point to the end of the version
symbol table, if present. Check it when initialising and updating
the ever pointer.
Tom Tromey [Fri, 8 Mar 2019 20:59:27 +0000 (13:59 -0700)]
Avoid a crash in source_cache::extract_lines
If the first requested line is larger than the number of lines in the
source buffer, source_cache::extract_lines could crash, because it
would try to pass string::npos" to string::substr.
This patch avoids the crash by checking for this case.
This version of the patch changes get_source_lines to return
std::string.
gdb/ChangeLog
2019-03-14 Tom Tromey <tromey@adacore.com>
* source-cache.h (class source_cache) <get_source_lines>: Return
std::string.
* source-cache.c (source_cache::extract_lines): Handle case where
first_pos==npos. Return std::string.
(source_cache::get_source_lines): Update.
Tom Tromey [Fri, 8 Mar 2019 20:54:07 +0000 (13:54 -0700)]
Add the "set style source" command
This adds "set style source" (and "show style source") commands. This
gives the user control over whether source code is highlighted.
gdb/ChangeLog
2019-03-14 Tom Tromey <tromey@adacore.com>
* NEWS: Add item for "style sources" commands.
* source-cache.c (source_cache::get_source_lines): Check
source_styling.
* cli/cli-style.c (source_styling): New global.
(_initialize_cli_style): Add "style sources" commands.
(show_style_sources): New function.
* cli/cli-style.h (source_styling): Declare.
gdb/doc/ChangeLog
2019-03-14 Tom Tromey <tromey@adacore.com>
* gdb.texinfo (Output Styling): Document "set style source" and
"show style source".
gdb/testsuite/ChangeLog
2019-03-14 Tom Tromey <tromey@adacore.com>
* gdb.base/style.exp: Add "set style sources" test.
Tom Tromey [Fri, 8 Mar 2019 20:41:55 +0000 (13:41 -0700)]
Make TUI react to "set style enabled"
When the user toggles "set style enabled", the TUI should react by
redrawing the source window, if necessary. This patch implements this
behavior.
No test because the TUI is generally not tested.
This version of the patch incorporates Pedro's patch to provide a
clean way to force the TUI to update the source window's contents.
gdb/ChangeLog
2019-03-14 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@adacore.com>
* tui/tui-winsource.h (tui_refill_source_window): Declare.
* tui/tui-winsource.c (tui_refill_source_window): New function,
from...
(tui_horizontal_source_scroll): ... here. Move some logic.
* cli/cli-style.c (set_style_enabled): Notify new observable.
* tui/tui-hooks.c (tui_redisplay_source): New function.
(tui_attach_detach_observers): Attach or detach
tui_redisplay_source.
* observable.h (source_styling_changed): New observable.
* observable.c: Define source_styling_changed observable.
GDB Administrator [Thu, 14 Mar 2019 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Thu, 28 Feb 2019 16:09:55 +0000 (09:09 -0700)]
Change pid_to_str to return std::string
Currently the target pid_to_str method returns a const char *, so many
implementations have a static buffer that they update. This patch
changes these methods to return a std::string instead. I think this
is cleaner and avoids possible gotchas when calling pid_to_str on
different ptids in a single statement. (Though no such calls exist
currently.)
This also updates various helper functions, and the gdbarch pid_to_str
methods.
I also made a best effort to fix all the callers, but I can't build
some of the *-nat.c files.
Tested by the buildbot.
gdb/ChangeLog
2019-03-13 Tom Tromey <tromey@adacore.com>
* i386-gnu-nat.c (i386_gnu_nat_target::fetch_registers)
(i386_gnu_nat_target::store_registers): Update.
* target-debug.h (target_debug_print_std_string): New macro.
* x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update.
* windows-tdep.c (display_one_tib): Update.
* tui/tui-stack.c (tui_make_status_line): Update.
* top.c (print_inferior_quit_action): Update.
* thread.c (thr_try_catch_cmd): Update.
(add_thread_with_info): Update.
(thread_target_id_str): Update.
(thr_try_catch_cmd): Update.
(thread_command): Update.
(thread_find_command): Update.
* record-btrace.c (record_btrace_target::info_record)
(record_btrace_resume_thread, record_btrace_target::resume)
(record_btrace_cancel_resume, record_btrace_step_thread)
(record_btrace_target::wait, record_btrace_target::wait)
(record_btrace_target::wait, record_btrace_target::stop): Update.
* progspace.c (print_program_space): Update.
* process-stratum-target.c
(process_stratum_target::thread_address_space): Update.
* linux-fork.c (linux_fork_mourn_inferior)
(detach_checkpoint_command, info_checkpoints_command)
(linux_fork_context): Update.
(linux_fork_detach): Update.
(class scoped_switch_fork_info): Update.
(delete_checkpoint_command): Update.
* infrun.c (follow_fork_inferior): Update.
(follow_fork_inferior): Update.
(proceed_after_vfork_done): Update.
(handle_vfork_child_exec_or_exit): Update.
(follow_exec): Update.
(displaced_step_prepare_throw): Update.
(displaced_step_restore): Update.
(start_step_over): Update.
(resume_1): Update.
(clear_proceed_status_thread): Update.
(proceed): Update.
(print_target_wait_results): Update.
(do_target_wait): Update.
(context_switch): Update.
(stop_all_threads): Update.
(restart_threads): Update.
(finish_step_over): Update.
(handle_signal_stop): Update.
(switch_back_to_stepped_thread): Update.
(keep_going_pass_signal): Update.
(print_exited_reason): Update.
(normal_stop): Update.
* inferior.c (inferior_pid_to_str): Change return type.
(print_selected_inferior): Update.
(add_inferior): Update.
(detach_inferior): Update.
* dummy-frame.c (fprint_dummy_frames): Update.
* dcache.c (dcache_info_1): Update.
* btrace.c (btrace_enable, btrace_disable, btrace_teardown)
(btrace_fetch, btrace_clear): Update.
* linux-tdep.c (linux_core_pid_to_str): Change return type.
* i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Change return
type.
* fbsd-tdep.c (fbsd_core_pid_to_str): Change return type.
* sol2-tdep.h (sol2_core_pid_to_str): Change return type.
* sol2-tdep.c (sol2_core_pid_to_str): Change return type.
* gdbarch.c, gdbarch.h: Rebuild.
* gdbarch.sh (core_pid_to_str): Change return type.
* windows-nat.c (struct windows_nat_target) <pid_to_str>: Change
return type.
(windows_nat_target::pid_to_str): Change return type.
(windows_delete_thread): Update.
(windows_nat_target::attach): Update.
(windows_nat_target::files_info): Update.
* target-delegates.c: Rebuild.
* sol-thread.c (class sol_thread_target) <pid_to_str>: Change
return type.
(sol_thread_target::pid_to_str): Change return type.
* remote.c (class remote_target) <pid_to_str>: Change return
type.
(remote_target::pid_to_str): Change return type.
(extended_remote_target::attach, remote_target::remote_stop_ns)
(remote_target::remote_notif_remove_queued_reply)
(remote_target::push_stop_reply, remote_target::disable_btrace):
Update.
(extended_remote_target::attach): Update.
* remote-sim.c (struct gdbsim_target) <pid_to_str>: Change return
type.
(gdbsim_target::pid_to_str): Change return type.
* ravenscar-thread.c (struct ravenscar_thread_target)
<pid_to_str>: Change return type.
(ravenscar_thread_target::pid_to_str): Change return type.
* procfs.c (class procfs_target) <pid_to_str>: Change return
type.
(procfs_target::pid_to_str): Change return type.
(procfs_target::attach): Update.
(procfs_target::detach): Update.
(procfs_target::fetch_registers): Update.
(procfs_target::store_registers): Update.
(procfs_target::wait): Update.
(procfs_target::files_info): Update.
* obsd-nat.c (obsd_nat_target::pid_to_str): Change return type.
* nto-procfs.c (struct nto_procfs_target) <pid_to_str>: Change
return type.
(nto_procfs_target::pid_to_str): Change return type.
(nto_procfs_target::files_info, nto_procfs_target::attach): Update.
* linux-thread-db.c (class thread_db_target) <pid_to_str>: Change
return type.
* linux-nat.c (linux_nat_target::pid_to_str): Change return type.
(exit_lwp): Update.
(attach_proc_task_lwp_callback, get_detach_signal)
(detach_one_lwp, resume_lwp, linux_nat_target::resume)
(linux_nat_target::resume, wait_lwp, stop_callback)
(maybe_clear_ignore_sigint, stop_wait_callback, status_callback)
(save_stop_reason, select_event_lwp, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps)
(linux_nat_target::wait, linux_nat_stop_lwp): Update.
* inf-ptrace.c (inf_ptrace_target::pid_to_str): Change return
type.
(inf_ptrace_target::attach): Update.
(inf_ptrace_target::files_info): Update.
* go32-nat.c (struct go32_nat_target) <pid_to_str>: Change return
type.
(go32_nat_target::pid_to_str): Change return type.
* gnu-nat.c (gnu_nat_target::pid_to_str): Change return type.
(gnu_nat_target::wait): Update.
(gnu_nat_target::wait): Update.
(gnu_nat_target::resume): Update.
* fbsd-nat.c (fbsd_nat_target::pid_to_str): Change return type.
(fbsd_nat_target::wait): Update.
* darwin-nat.c (darwin_nat_target::pid_to_str): Change return
type.
(darwin_nat_target::attach): Update.
* corelow.c (class core_target) <pid_to_str>: Change return type.
(core_target::pid_to_str): Change return type.
* target.c (normal_pid_to_str): Change return type.
(default_pid_to_str): Likewise.
(target_pid_to_str): Change return type.
(target_translate_tls_address): Update.
(target_announce_detach): Update.
* bsd-uthread.c (struct bsd_uthread_target) <pid_to_str>: Change
return type.
(bsd_uthread_target::pid_to_str): Change return type.
* bsd-kvm.c (class bsd_kvm_target) <pid_to_str>: Change return
type.
(bsd_kvm_target::pid_to_str): Change return type.
* aix-thread.c (class aix_thread_target) <pid_to_str>: Change
return type.
(aix_thread_target::pid_to_str): Change return type.
* target.h (struct target_ops) <pid_to_str>: Change return type.
(target_pid_to_str, normal_pid_to_str): Likewise.
* obsd-nat.h (class obsd_nat_target) <pid_to_str>: Change return
type.
* linux-nat.h (class linux_nat_target) <pid_to_str>: Change return
type.
* inf-ptrace.h (struct inf_ptrace_target) <pid_to_str>: Change
return type.
* gnu-nat.h (struct gnu_nat_target) <pid_to_str>: Change return
type.
* fbsd-nat.h (class fbsd_nat_target) <pid_to_str>: Change return
type.
* darwin-nat.h (class darwin_nat_target) <pid_to_str>: Change
return type.
Simon Marchi [Wed, 13 Mar 2019 19:13:03 +0000 (15:13 -0400)]
Fix MI output for multi-location breakpoints
New in v2:
- Addressed comments about doc, updated the MI version table
- New doc for the Breakpoint information format
- New -fix-multi-location-breakpoint-output command, with associated
doc, test and NEWS updated accordingly
- Fixed the output, the locations list is now actually in the tuple
representing the breakpoint.
Various MI commands or events related to breakpoints output invalid MI
records when printing information about a multi-location breakpoint.
For example:
-break-insert allo
^done,bkpt={...,addr="<MULTIPLE>",...},{number="1.1",...},{number="1.2",...}
The problem is that according to the syntax [1], the top-level elements
are of type "result" and should be of the form "variable=value".
This patch changes the output to wrap the locations in a list:
^done,bkpt={...,addr="<MULTIPLE>",locations=[{number="1.1",...},{number="1.2",...}]}
The events =breakpoint-created, =breakpoint-modified, as well as the
-break-info command also suffer from this (and maybe others I didn't
find).
Since this is a breaking change for MI, we have to deal somehow with
backwards compatibility. The approach taken by this patch is to bump
the MI version, use the new syntax in MI3 while retaining the old syntax
in MI2. Frontends are expected to use a precise MI version (-i=mi2), so
if they do that they should be unaffected.
The patch also adds the command -fix-multi-location-breakpoint-output,
which front ends can use to enable this behavior with MI <= 2.
[1] https://sourceware.org/gdb/onlinedocs/gdb/GDB_002fMI-Output-Syntax.html#GDB_002fMI-Output-Syntax
gdb/ChangeLog:
* NEWS: Mention that the new default MI version is 3. Mention
changes to the output of commands and events that deal with
multi-location breakpoints.
* breakpoint.c: Include "mi/mi-out.h".
(print_one_breakpoint): Change output syntax if using MI version
>= 3.
* mi/mi-main.h (mi_cmd_fix_multi_location_breakpoint_output):
New.
(mi_multi_location_breakpoint_output_fixed): New.
* mi/mi-main.c (fix_multi_location_breakpoint_output): New.
(mi_cmd_fix_multi_location_breakpoint_output): New.
(mi_multi_location_breakpoint_output_fixed): New.
* mi/mi-cmds.c (mi_cmds): Register command
-fix-multi-location-breakpoint-output.
* mi/mi-out.c (mi_out_new): Instantiate version 3 when using
interpreter "mi".
gdb/testsuite/ChangeLog:
* mi-breakpoint-location-ena-dis.exp: Rename to ...
* mi-breakpoint-multiple-locations.exp: ... this.
(make_breakpoints_pattern): New proc.
(do_test): Add mi_version parameter, test -break-insert,
-break-info and =breakpoint-created.
gdb/doc/ChangeLog:
* gdb.texinfo (Mode Options): Mention mi3.
(Interpreters): Likewise.
(GDB/MI Development and Front Ends): Add entry for MI 3 in
version table. Document -fix-multi-location-breakpoint-output.
(GDB/MI Breakpoint Information): Document format of breakpoint
location output.
Simon Marchi [Wed, 13 Mar 2019 17:25:43 +0000 (13:25 -0400)]
Factor out mi_ui_out instantiation logic
When re-reviewing this [1] I noticed that there were two spots encoding
the logic of instantiating an mi_ui_out object based on the interpreter
name ("mi", "mi1", "mi2" or "mi3"):
- mi_interp::init
- mi_load_progress
Both encode the logic to choose what the default version is when the
interpreter name is "mi". I had forgotten the one in mi_load_progress.
Therefore, I propose extracting that logic to a single function. I
started to add a new overload of mi_out_new, then realized the current
mi_out_new wasn't very useful, being just a thing wrapper around "new
mi_ui_out". So I ended up with just an mi_out_new function taking the
interp name as parameter.
I ran the gdb.mi tests, and verified manually the behavior (including
the load command).
[1] https://sourceware.org/ml/gdb-patches/2019-01/msg00427.html
gdb/ChangeLog:
* mi/mi-out.h (mi_out_new): Change parameter to const char *.
* mi/mi-out.c (mi_out_new): Change parameter to const char *,
instantiate mi_ui_out based on interpreter name.
* mi/mi-interp.c (mi_interp::init): Use the new mi_out_new.
* mi/mi-main.c (mi_load_progress): Likewise.
Sudakshina Das [Wed, 13 Mar 2019 11:09:10 +0000 (11:09 +0000)]
[BFD, LD, AArch64, 3/3] Add --pac-plt to enable PLTs protected with PAC.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
1) This patch adds new definitions of PAC enabled PLTs
and both BTI and PAC enabled PLTs.
2) It also defines the new dynamic tag DT_AARCH64_PAC_PLT
for the PAC enabled PLTs.
3) This patch adds a new ld command line option: --pac-plt.
In the presence of this option, the linker uses the PAC
enabled PLTs and marks with DT_AARCH64_PAC_PLT.
4) In case both BTI and PAC are enabled the linker should
pick PLTs enabled with both and also use dynamic tags for both.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elfnn-aarch64.c (PLT_PAC_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): New.
(PLT_BTI_PAC_ENTRY_SIZE, PLT_BTI_PAC_SMALL_ENTRY_SIZE): New.
(setup_plt_values): Account for PAC or PAC and BTI enabled PLTs.
(elfNN_aarch64_size_dynamic_sections): Add checks for PLT_BTI_PAC
and PLT_PAC_PLT.
(elfNN_aarch64_finish_dynamic_sections): Account for PLT_BTI_PAC.
(get_plt_type): Add case for DT_AARCH64_PAC_PLT.
(elfNN_aarch64_plt_sym_val): Add cases for PLT_BTI_PAC and PLT_PAC.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* readelf.c (get_aarch64_dynamic_type): Add case for
DT_AARCH64_PAC_PLT.
(dynamic_section_aarch64_val): Likewise.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf/aarch64.h (DT_AARCH64_PAC_PLT): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* NEWS: Document --pac-plt.
* emultempl/aarch64elf.em (OPTION_PAC_PLT): New.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Add pac-plt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_PAC_PLT.
* testsuite/ld-aarch64/aarch64-elf.exp: Add the following tests.
* testsuite/ld-aarch64/bti-pac-plt-1.d: New test.
* testsuite/ld-aarch64/bti-pac-plt-2.d: New test.
* testsuite/ld-aarch64/pac-plt-1.d: New test.
* testsuite/ld-aarch64/pac-plt-2.d: New test.
* testsuite/ld-aarch64/bti-plt-1.s: Add .ifndef directive.
Sudakshina Das [Wed, 13 Mar 2019 10:54:30 +0000 (10:54 +0000)]
[BFD, LD, AArch64, 2/3] Add --force-bti to enable BTI and to select BTI enabled PLTs
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
1) This patch adds a new ld command line option: --force-bti.
In the presence of this option, the linker enables BTI with the
GNU_PROPERTY_AARCH64_FEATURE_1_BTI feature. This gives out warning
in case of missing gnu notes for BTI in inputs.
2) It also defines a new set of BTI enabled PLTs. These are used either
when all the inputs are marked with GNU_PROPERTY_AARCH64_FEATURE_1_BTI
or when the new --force-bti option is used. This required adding new
fields in elf_aarch64_link_hash_table so that we could make the PLT
related information more generic.
3) It also defines a dynamic tag DT_AARCH64_BTI_PLT. The linker uses
this whenever it picks BTI enabled PLTs.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* bfd-in.h (aarch64_plt_type, aarch64_enable_bti_type): New.
(aarch64_bti_pac_info): New.
(bfd_elf64_aarch64_set_options): Add aarch64_bti_pac_info argument.
(bfd_elf32_aarch64_set_options): Likewise.
* bfd-in2.h: Regenerate
* elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): New.
(PLT_BTI_SMALL_ENTRY_SIZE, PLT_BTI_TLSDESC_ENTRY_SIZE): New.
(elfNN_aarch64_small_plt0_bti_entry): New.
(elfNN_aarch64_small_plt_bti_entry): New.
(elfNN_aarch64_tlsdesc_small_plt_bti_entry): New.
(elf_aarch64_obj_tdata): Add no_bti_warn and plt_type fields.
(elf_aarch64_link_hash_table): Add plt0_entry, plt_entry and
tlsdesc_plt_entry_size fields.
(elfNN_aarch64_link_hash_table_create): Initialise the new fields.
(setup_plt_values): New helper function.
(bfd_elfNN_aarch64_set_options): Use new bp_info to set plt sizes and
bti enable type.
(elfNN_aarch64_allocate_dynrelocs): Use new size members instead of
fixed macros.
(elfNN_aarch64_size_dynamic_sections): Likewise and add checks.
(elfNN_aarch64_create_small_pltn_entry): Use new generic pointers
to plt stubs instead of fixed ones and update filling them according
to the need for bti.
(elfNN_aarch64_init_small_plt0_entry): Likewise.
(elfNN_aarch64_finish_dynamic_sections): Likewise.
(get_plt_type, elfNN_aarch64_get_synthetic_symtab): New.
(elfNN_aarch64_plt_sym_val): Update size accordingly.
(elfNN_aarch64_link_setup_gnu_properties): Set up plts if BTI GNU NOTE
is set.
(bfd_elfNN_get_synthetic_symtab): Define.
(elfNN_aarch64_merge_gnu_properties): Give out warning with --force-bti
and mising BTI NOTE SECTION.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* readelf.c (get_aarch64_dynamic_type): New.
(get_dynamic_type): Use above for EM_AARCH64.
(dynamic_section_aarch64_val): New.
(process_dynamic_section): Use above for EM_AARCH64.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* elf/aarch64.h (DT_AARCH64_BTI_PLT): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* NEWS: Document --force-bti.
* emultempl/aarch64elf.em (plt_type, bti_type, OPTION_FORCE_BTI): New.
(PARSE_AND_LIST_SHORTOPTS, PARSE_AND_LIST_OPTIONS): Add force-bti.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_FORCE_BTI.
* testsuite/ld-aarch64/aarch64-elf.exp: Add all the tests below.
* testsuite/ld-aarch64/bti-plt-1.d: New test.
* testsuite/ld-aarch64/bti-plt-1.s: New test.
* testsuite/ld-aarch64/bti-plt-2.s: New test.
* testsuite/ld-aarch64/bti-plt-2.d: New test.
* testsuite/ld-aarch64/bti-plt-3.d: New test.
* testsuite/ld-aarch64/bti-plt-4.d: New test.
* testsuite/ld-aarch64/bti-plt-5.d: New test.
* testsuite/ld-aarch64/bti-plt-6.d: New test.
* testsuite/ld-aarch64/bti-plt-7.d: New test.
* testsuite/ld-aarch64/bti-plt-so.s: New test.
* testsuite/ld-aarch64/bti-plt.ld: New test.
Sudakshina Das [Wed, 13 Mar 2019 10:42:27 +0000 (10:42 +0000)]
[BFD, LD, AArch64, 1/3] Add support for GNU PROPERTIES in AArch64 for BTI and PAC
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
This patch implements the following:
1) This extends in the gnu property support in the linker for
AArch64 by defining backend hooks for elf_backend_setup_gnu_properties,
elf_backend_merge_gnu_properties and elf_backend_parse_gnu_properties.
2) It defines AArch64 specific GNU property
GNU_PROPERTY_AARCH64_FEATURE_1_AND and 2 bit for BTI and PAC in it.
3) It also adds support in readelf.c to read and print these new
GNU properties in AArch64.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf-properties.c (_bfd_elf_link_setup_gnu_properties): Exclude
linker created inputs from merge.
* elfnn-aarch64.c (struct elf_aarch64_obj_tdata): Add field for
GNU_PROPERTY_AARCH64_FEATURE_1_AND properties.
(elfNN_aarch64_link_setup_gnu_properties): New.
(elfNN_aarch64_merge_gnu_properties): New.
(elf_backend_setup_gnu_properties): Define for AArch64.
(elf_backend_merge_gnu_properties): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Define.
(_bfd_aarch64_elf_parse_gnu_properties): Define.
(_bfd_aarch64_elf_merge_gnu_properties): Define.
* elfxx-aarch64.h (_bfd_aarch64_elf_link_setup_gnu_properties): Declare.
(_bfd_aarch64_elf_parse_gnu_properties): Declare.
(_bfd_aarch64_elf_merge_gnu_properties): Declare.
(elf_backend_parse_gnu_properties): Define for AArch64.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* readelf.c (decode_aarch64_feature_1_and): New.
(print_gnu_property_note): Add case for AArch64 gnu notes.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf/common.h (GNU_PROPERTY_AARCH64_FEATURE_1_AND): New.
(GNU_PROPERTY_AARCH64_FEATURE_1_BTI): New.
(GNU_PROPERTY_AARCH64_FEATURE_1_PAC): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* NEWS: Document GNU_PROPERTY_AARCH64_FEATURE_1_BTI and
GNU_PROPERTY_AARCH64_FEATURE_1_PAC.
* testsuite/ld-aarch64/aarch64-elf.exp: Add run commands for new tests.
* testsuite/ld-aarch64/property-bti-pac1.d: New test.
* testsuite/ld-aarch64/property-bti-pac1.s: New test.
* testsuite/ld-aarch64/property-bti-pac2.d: New test.
* testsuite/ld-aarch64/property-bti-pac2.s: New test.
* testsuite/ld-aarch64/property-bti-pac3.d: New test.
H.J. Lu [Wed, 13 Mar 2019 06:38:15 +0000 (14:38 +0800)]
x86: Properly set IBT and SHSTK properties for -z ibt/shstk
There should be no AND properties if some input doesn't have them. We
should set IBT and SHSTK properties for -z ibt and -z shstk if needed.
bfd/
PR ld/24322
* elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Properly
merge GNU_PROPERTY_X86_FEATURE_1_[IBT|SHSTK].
ld/
PR ld/24322
* testsuite/ld-i386/i386.exp: Run PR ld/24322 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr24322a.d: New file.
* testsuite/ld-i386/pr24322b.d: Likewise.
* testsuite/ld-x86-64/pr24322a-x32.d: Likewise.
* testsuite/ld-x86-64/pr24322a.d: Likewise.
* testsuite/ld-x86-64/pr24322b-x32.d: Likewise.
* testsuite/ld-x86-64/pr24322b.d: Likewise.
* testsuite/ld-x86-64/pr24322a.s: Likewise.
* testsuite/ld-x86-64/pr24322b.s: Likewise.
* testsuite/ld-x86-64/pr24322c.s: Likewise.
Christian Eggers [Sun, 10 Mar 2019 18:21:58 +0000 (19:21 +0100)]
dwarf2: Align relocation within .debug_line section
All relocations specify a byte address. As dwarf debug information is
organized in octets, some relocations may not be aligned. While it
might be possible to define special relocations that operate at an
octet offset from their address, it's easier to ensure the relocations
are aligned by padding with "nop" statements.
In most dwarf sections this requirement is already fulfilled, only
relocations for symbol address within the .debug_line section can be
misaligned.
* dwarf2dbg.c (out_set_addr): Align relocation within .debug_line.
Christian Eggers [Sun, 10 Mar 2019 18:21:57 +0000 (19:21 +0100)]
dwarf2: Pad size of .debug_line section.
As all dwarf debug information is organized in octets, the size of all
dwarf sections must be aligned to OCTETS_PER_BYTE. Most DWARF sections
meet this requirement, only the .debug_line section can reach an
arbitrary octet size.
In order to align the size to a multiple of OCTETS_PER_BYTE, the section
is padded with "nop" statements at the end.
* dwarf2dbg.c (out_debug_line): Pad size of .debug_line section.
Christian Eggers [Sun, 10 Mar 2019 18:21:56 +0000 (19:21 +0100)]
dwarf2: Use octets for .debug_string offsets
Like other dwarf2 offsets, also the string offsets in the .debug_info
section which points into the .debug_str section must be expressed in
octets instead of bytes.
* dwarf2dbg.c (out_debug_str): Use octets for .debug_string pointers.
Christian Eggers [Sun, 10 Mar 2019 18:21:55 +0000 (19:21 +0100)]
dwarf2: Use octets for .debug_line prologue
Like the u32 size field at the beginning of the section, also the
prologue size must be expressed in octets.
* dwarf2dbg.c (out_debug_line): Use octets for .debug_line prologue.
Christian Eggers [Sun, 10 Mar 2019 18:21:54 +0000 (19:21 +0100)]
dwarf2: Use octets for dwarf2 headers
The content of the dwarf2 sections .debug_line, .debug_aranges and
.debug_info starts with an u32 containing the the size of the remaining
data. According to the dwarf2 specification this value must be expressed
in octets instead of bytes.
* dwarf2dbg.c (out_debug_line): Use octets for dwarf2 headers.
(out_debug_aranges, out_debug_info): Likewise.
Christian Eggers [Sun, 10 Mar 2019 18:21:53 +0000 (19:21 +0100)]
Symbols with octets value
Up to now, all symbol values are in units of bytes, where a "byte" can
consist of one or more octets (e.g. 8 bit or 16 bit).
Allow to specfiy that the "unit" of a newly created symbol is octets
(exactly 8 bit), instead of bytes.
* symbols.h (symbol_temp_new_now_octets): Declare.
(symbol_set_value_now_octets, symbol_octets_p): Declare.
* symbols.c (struct symbol_flags): New member sy_octets.
(symbol_temp_new_now_octets): New function.
(resolve_symbol_value): Return octets instead of bytes if
sy_octets is set.
(symbol_set_value_now_octets): New function.
(symbol_octets_p): New function.
Christian Eggers [Sun, 10 Mar 2019 18:21:52 +0000 (19:21 +0100)]
dwarf2: Fix calculation of line info offset
The units of the value returned by "frag_now_fix()" and "size" do not
match. "frag_now_fix()" returns bytes (can be 8, 16 or 32 bit), while
"size" is octets (exactly 8 bit).
* dwarf2dbg.c (dwarf2_emit_insn): Fix calculation of line info offset.
GDB Administrator [Wed, 13 Mar 2019 00:00:16 +0000 (00:00 +0000)]
Automatic date update in version.in
John Baldwin [Tue, 12 Mar 2019 20:56:53 +0000 (13:56 -0700)]
The NEWS file had two "New targets" sections for 8.3.
gdb/ChangeLog:
* NEWS: Combine separate "New targets" sections for 8.3.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Support TLS variables on FreeBSD/powerpc.
Derive the pointer to the DTV array from the %r2 register on 32-bit
powerpc and %r13 on 64-bit powerpc.
gdb/ChangeLog:
* ppc-fbsd-tdep.c (ppcfbsd_get_thread_local_address): New.
(ppcfbsd_init_abi): Install gdbarch
"fetch_tls_load_module_address" and "get_thread_local_address"
methods.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Support TLS variables on FreeBSD/riscv.
Derive the pointer to the DTV array from the tp register.
gdb/ChangeLog:
* riscv-fbsd-tdep.c (riscv_fbsd_get_thread_local_address): New.
(riscv_fbsd_init_abi): Install gdbarch
"fetch_tls_load_module_address" and "get_thread_local_address"
methods.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Support TLS variables on FreeBSD/i386.
Derive the pointer to the DTV array from the gs_base register. As
with FreeBSD/amd64, gs_base is currently only available via the native
target.
gdb/ChangeLog:
* i386-fbsd-tdep.c (i386fbsd_get_thread_local_address): New.
(i386fbsd_init_abi): Install gdbarch
"fetch_tls_load_module_address" and "get_thread_local_address"
methods.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Support TLS variables on FreeBSD/amd64.
Use the fs_base register to fetch the address of a thread's tcb and
calculate the address of the DTV array. This value is then passed to
fbsd_get_thread_local_address to compute the final variable address.
Note that fs_base is currently only available via the native target as
core dumps on FreeBSD do not store the value of fs_base.
gdb/ChangeLog:
* amd64-fbsd-tdep.c (amd64fbsd_get_thread_local_address): New.
(amd64fbsd_init_abi): Install gdbarch
"fetch_tls_load_module_address" and "get_thread_local_address"
methods.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Add a helper function to resolve TLS variable addresses for FreeBSD.
The fbsd_get_thread_local_address function accepts the base address of
a thread's DTV array and the base address of an object file's link map
and uses this to compute a TLS variable's address. FreeBSD
architectures use an architecture-specific method to determine the
address of the DTV array pointer and call this helper function to
perform the rest of the address calculation.
* fbsd-tdep.c (fbsd_pspace_data_handle): New variable.
(struct fbsd_pspace_data): New type.
(get_fbsd_pspace_data, fbsd_pspace_data_cleanup)
(fbsd_read_integer_by_name, fbsd_fetch_rtld_offsets)
(fbsd_get_tls_index, fbsd_get_thread_local_address): New function.
(_initialize_fbsd_tdep): Initialize 'fbsd_pspace_data_handle'.
* fbsd-tdep.c (fbsd_get_thread_local_address): New prototype.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Add a more general version of lookup_struct_elt_type.
lookup_struct_elt is a new function which returns a tuple of
information about a component of a structure or union. The returned
tuple contains a pointer to the struct field object for the component
as well as a bit offset of that field within the structure. If the
field names a field in an anonymous substructure, the offset is the
"global" offset relative to the original structure type. If noerr is
set, then the returned tuple will set the field pointer to NULL to
indicate a missing component rather than throwing an error.
lookup_struct_elt_type is now reimplemented in terms of this new
function. It simply returns the type of the returned field.
gdb/ChangeLog:
* gdbtypes.c (lookup_struct_elt): New function.
(lookup_struct_elt_type): Reimplement via lookup_struct_elt.
* gdbtypes.h (struct struct_elt): New type.
(lookup_struct_elt): New prototype.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Remove code disabled since at least 1999 from lookup_struct_elt_type.
Update the comment above the function to reflect the code removal and
document the existing behavior.
gdb/ChangeLog:
* gdbtypes.c (lookup_struct_elt_type): Update comment and
remove disabled code block.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Add a new gdbarch method to resolve the address of TLS variables.
Permit TLS variable addresses to be resolved purely by an ABI rather
than requiring a target method. This doesn't try the target method if
the ABI function is present (even if the ABI function fails) to
simplify error handling.
gdb/ChangeLog:
* gdbarch.sh (get_thread_local_address): New method.
* gdbarch.h, gdbarch.c: Regenerate.
* target.c (target_translate_tls_address): Use
gdbarch_get_thread_local_address if present instead of
target::get_thread_local_address.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Update comment for target::get_thread_local_address.
There isn't an 'objfile' parameter, instead 'load_module_addr' is used
to indicate the executable or shared library. Also, the function
throws errors rather than returning error values.
gdb/ChangeLog:
* target.h (target::get_thread_local_address): Update comment.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Handle an edge case for minisym TLS variable lookups.
If a TLS variable is provided by a minisym from a separate debug file,
the separate debug file is passed to
gdbarch_fetch_tls_load_module_address. However, the object files
stored in the shared object list are the original object files, not
the separate debug object files. In this case,
svr4_fetch_objfile_link_map was failing to find the link map entry
since the debug object file is not in its internal list, only the
original object file.
gdb/ChangeLog:
* solib-svr4.c (svr4_fetch_objfile_link_map): Look for
objfile->separate_debug_objfile_backlink if not NULL.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Support fs_base and gs_base on FreeBSD/i386.
The i386 BSD native target uses the same ptrace operations
(PT_[GS]ET[FG]SBASE) as the amd64 BSD native target to fetch and store
the registers.
The amd64 BSD native now uses 'tdep->fsbase_regnum' instead of
hardcoding AMD64_FSBASE_REGNUM and AMD64_GSBASE_REGNUM to support
32-bit targets. In addition, the store operations explicitly zero the
new register value before fetching it from the register cache to
ensure 32-bit values are zero-extended.
gdb/ChangeLog:
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
tdep->fsbase_regnum instead of constants for fs_base and gs_base.
(amd64bsd_store_inferior_registers): Likewise.
* amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description):
Enable segment base registers.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers): Use
PT_GETFSBASE and PT_GETGSBASE.
(i386bsd_store_inferior_registers): Use PT_SETFSBASE and
PT_SETGSBASE.
* i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Enable
segment base registers.
* i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise.
John Baldwin [Tue, 12 Mar 2019 20:39:02 +0000 (13:39 -0700)]
Support the fs_base and gs_base registers on i386.
As on amd64, these registers hold the base address of the fs and gs
segments, respectively. For i386 these two registers are 32 bits.
gdb/ChangeLog:
* amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description):
Update calls to i386_target_description to add 'segments'
parameter.
* amd64-tdep.c (amd64_init_abi): Set tdep->fsbase_regnum. Don't
add segment base registers.
* arch/i386.c (i386_create_target_description): Add 'segments'
parameter to enable segment base registers.
* arch/i386.h (i386_create_target_description): Likewise.
* features/i386/32bit-segments.xml: New file.
* features/i386/32bit-segments.c: Generate.
* i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Update
call to i386_target_description to add 'segments' parameter.
* i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise.
* i386-go32-tdep.c (i386_go32_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_read_description): Likewise.
* i386-tdep.c (i386_validate_tdesc_p): Add segment base registers
if feature is present.
(i386_gdbarch_init): Pass I386_NUM_REGS to set_gdbarch_num_regs.
Add 'segments' parameter to call to i386_target_description.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
(_initialize_i386_tdep) [GDB_SELF_TEST]: Add 'segments' parameter
to call to i386_target_description.
* i386-tdep.h (struct gdbarch_tdep): Add 'fsbase_regnum'.
(enum i386_regnum): Add I386_FSBASE_REGNUM and I386_GSBASE_REGNUM.
Define I386_NUM_REGS.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
gdb/gdbserver/ChangeLog:
* linux-x86-tdesc.c (i386_linux_read_description): Update call to
i386_create_target_description for 'segments' parameter.
* lynx-i386-low.c (lynx_i386_arch_setup): Likewise.
* nto-x86-low.c (nto_x86_arch_setup): Likewise.
* win32-i386-low.c (i386_arch_setup): Likewise.
Andrew Burgess [Thu, 7 Mar 2019 13:20:37 +0000 (13:20 +0000)]
gdb/testsuite: Prepare for DejaGnu 1.6.2
Changes in DejaGnu 1.6.2 mean that our testsuite will no longer run.
This is because of some confusion over how the gdb.exp file is
handled.
The gdb.exp file is really the tool init file, which is loaded from
within the DejaGnu core, and it should not be loaded directly from any
other file in the testsuite.
DejaGnu tries to prevent the same library being loaded twice by
remembering the names of library files as they are loaded. Until
recently loading the tool init file in DejaGnu was very similar to
loading a library file, as a result, loading the gdb.exp tool init
file simply recorded 'gdb.exp' as having been loaded, future attempts
to load 'gdb.exp' as a library would then be ignored (as the file was
marked as already loaded).
DejaGnu has now changed so that it supports having both a tool init
file and a library with the same name, something that was not possible
before. What this means however is that when the core loads the
'gdb.exp' tool init file it no longer marks the library 'gdb.exp' as
having been loaded. When we then execute 'load_lib gdb.exp' we then
try to reload the 'gdb.exp' file.
Unfortunately our gdb.exp file can only be loaded once. It use of
'rename cd builtin_cd' means that a second attempt to load this file
will fail.
This was discussed on the DejaGnu list here:
http://lists.gnu.org/archive/html/dejagnu/2019-03/msg00000.html
and the suggested advice is that, unless we have some real requirement
to load the tool init file twice, we should remove calls to 'load_lib
gdb.exp' and rely on DejaGnu to load the file for us, which is what
this patch does.
I've tested with native X86-64/GNU Linux and see no regressions.
gdb/testsuite/ChangeLog:
* config/default.exp: Remove 'load_lib gdb.exp'.
* config/monitor.exp: Likewise.
* config/sid.exp: Likewise.
* config/sim.exp: Likewise.
* config/slite.exp: Likewise.
* config/unix.exp: Likewise.
* gdb.base/default.exp: Remove unhelpful comment.
Eli Zaretskii [Tue, 12 Mar 2019 17:47:23 +0000 (19:47 +0200)]
Fix MinGW build with source-highlight
gdb/ChangeLog
2019-03-12 Eli Zaretskii <eliz@gnu.org>
PR/24325
* source-cache.c: #undef open and close, to avoid unresolved
externals during linking.
Tom Tromey [Tue, 12 Mar 2019 17:03:03 +0000 (11:03 -0600)]
Make remote.c ptid constants "const"
This changes magic_null_ptid, not_sent_ptid, and any_thread_ptid to be
"const". This is a minor improvement that makes it so these can't be
accidentally modified.
Tested by rebuilding. I'm checking this in.
gdb/ChangeLog
2019-03-12 Tom Tromey <tromey@adacore.com>
* remote.c (magic_null_ptid, not_sent_ptid, any_thread_ptid): Now
const. Add initializers.
(_initialize_remote): Don't initialize ptid globals.
Pedro Alves [Tue, 12 Mar 2019 16:56:02 +0000 (16:56 +0000)]
Fix test-cp-name-parser build, parser_fprintf undefined
$ make test-cp-name-parser
...
test-cp-name-parser.o: In function `yy_symbol_print(_IO_FILE*, int, YYSTYPE const*, cpname_state*)':
build/gdb/cp-name-parser.c.tmp:1335: undefined reference to `parser_fprintf(_IO_FILE*, char const*, ...)'
build/gdb/cp-name-parser.c.tmp:1339: undefined reference to `parser_fprintf(_IO_FILE*, char const*, ...)'
test-cp-name-parser.o: In function `yy_stack_print(short*, short*)':
build/gdb/cp-name-parser.c.tmp:1350: undefined reference to `parser_fprintf(_IO_FILE*, char const*, ...)'
build/gdb/cp-name-parser.c.tmp:1354: undefined reference to `parser_fprintf(_IO_FILE*, char const*, ...)'
build/gdb/cp-name-parser.c.tmp:1356: undefined reference to `parser_fprintf(_IO_FILE*, char const*, ...)'
build/gdb/cp-name-parser.c.tmp:1376: more undefined references to `parser_fprintf(_IO_FILE*, char const*, ...)' follow
collect2: error: ld returned 1 exit status
make: *** [Makefile:1833: test-cp-name-parser] Error 1
gdb/ChangeLog:
2019-03-12 Pedro Alves <palves@redhat.com>
* yy-remap.h [TEST_CPNAMES] (YYFPRINTF): Don't define.
Pedro Alves [Tue, 12 Mar 2019 16:56:02 +0000 (16:56 +0000)]
Fix test-cp-name-parser build, unused variable
$ make test-cp-name-parser
...
CXX test-cp-name-parser.o
src/gdb/cp-name-parser.y: In function ‘int gdb::main(int, char**)’:
src/gdb/cp-name-parser.y:2137:6: error: unused variable ‘len’ [-Werror=unused-variable]
int len;
^~~
cc1plus: all warnings being treated as errors
gdb/ChangeLog:
2019-03-12 Pedro Alves <palves@redhat.com>
* cp-name-parser.y (main): Remove unused 'len' variable.
Tom Tromey [Mon, 4 Mar 2019 19:05:47 +0000 (12:05 -0700)]
Make null_ptid and minus_one_ptid "const"
This makes null_ptid and minus_one_ptid "const". I think this is an
improvement because it means they can't be accidentally modified.
2019-03-12 Tom Tromey <tromey@adacore.com>
* common/ptid.c (null_ptid, minus_one_ptid): Now const.
* common/ptid.h (null_ptid, minus_one_ptid): Now const.
Tom Tromey [Mon, 4 Mar 2019 19:05:03 +0000 (12:05 -0700)]
Change iterate_over_lwps to take a gdb::function_view
This changes iterate_over_lwps to use a gdb::function_view. This was
needed in order to make null_ptid and minus_one_ptid 'const'.
gdb/ChangeLog
2019-03-12 Tom Tromey <tromey@adacore.com>
* linux-nat.c (iterate_over_lwps): Update.
(stop_callback): Remove parameter.
(stop_wait_callback, detach_callback, resume_set_callback)
(select_singlestep_lwp_callback, set_ignore_sigint)
(status_callback, resumed_callback, resume_clear_callback)
(kill_callback, kill_wait_callback, linux_nat_stop_lwp): Remove
data parameter.
(linux_nat_target::detach, linux_nat_target::resume)
(linux_stop_and_wait_all_lwps, select_event_lwp)
(linux_nat_filter_event, linux_nat_wait_1)
(linux_nat_target::kill, linux_nat_target::stop)
(linux_nat_target::stop): Update.
(linux_nat_resume_callback): Change type.
(resume_stopped_resumed_lwps, count_events_callback)
(select_event_lwp_callback): Likewise.
(linux_stop_lwp, linux_nat_stop_lwp): Update.
* arm-linux-nat.c (struct update_registers_data): Remove.
(update_registers_callback): Change type.
(arm_linux_insert_hw_breakpoint1): Update.
* nat/x86-linux-dregs.c (update_debug_registers_callback): Remove
parameter.
(x86_linux_dr_set_addr): Update.
(x86_linux_dr_set_control): Update.
* nat/linux-nat.h (iterate_over_lwps_ftype): Remove parameter.
(iterate_over_lwps): Use gdb::function_view.
* nat/aarch64-linux-hw-point.c (struct
aarch64_dr_update_callback_param): Remove.
(debug_reg_change_callback): Change type.
(aarch64_notify_debug_reg_change): Update.
* s390-linux-nat.c (s390_refresh_per_info): Update.
gdb/gdbserver/ChangeLog
2019-03-12 Tom Tromey <tromey@adacore.com>
* linux-low.c (iterate_over_lwps): Update.
Alan Modra [Tue, 12 Mar 2019 05:49:25 +0000 (16:19 +1030)]
Don't use bfd_get_file_size in objdump
Compressed debug sections can have uncompressed sizes that exceed the
original file size, so we can't use bfd_get_file_size. objdump also
used bfd_get_file_size to limit reloc section size, but I believe the
underlying bug causing the PR22508 out of bounds buffer access was
that we had an integer overflow when calculating the reloc buffer
size. I've fixed that instead in most of the backends, som and
vms-alpha being the exceptions. SOM and vmd-alpha have rather more
serious bugs in their slurp_relocs routines that would need fixing
first if we want to fuss about making them safe against fuzzed object
files.
The patch also fixes a number of other potential overflows by using
the bfd_alloc2/malloc2/zalloc2 memory allocation functions.
bfd/
* coffcode.h (buy_and_read): Delete unnecessary forward decl. Add
nmemb parameter. Use bfd_alloc2.
(coff_slurp_line_table): Use bfd_alloc2. Update buy_and_read calls.
Delete assertion.
(coff_slurp_symbol_table): Use bfd_alloc2 and bfd_zalloc2.
(coff_slurp_reloc_table): Use bfd_alloc2. Update buy_and_read calls.
* coffgen.c (coff_get_reloc_upper_bound): Ensure size calculation
doesn't overflow.
* elf.c (bfd_section_from_shdr): Use bfd_zalloc2. Style fix.
(assign_section_numbers): Style fix.
(swap_out_syms): Use bfd_malloc2.
(_bfd_elf_get_reloc_upper_bound): Ensure size calculation doesn't
overflow.
(_bfd_elf_make_empty_symbol): Style fix.
(elfobj_grok_stapsdt_note_1): Formatting.
* elfcode.h (elf_object_p): Use bfd_alloc2.
(elf_write_relocs, elf_write_shdrs_and_ehdr): Likewise.
(elf_slurp_symbol_table): Use bfd_zalloc2.
(elf_slurp_reloc_table): Use bfd_alloc2.
(_bfd_elf_bfd_from_remote_memory): Use bfd_malloc2.
* elf64-sparc (elf64_sparc_get_reloc_upper_bound): Ensure
size calculation doesn't overflow.
(elf64_sparc_get_dynamic_reloc_upper_bound): Likewise.
* mach-o.c (bfd_mach_o_get_reloc_upper_bound): Likewise.
* pdp11.c (get_reloc_upper_bound): Copy aoutx.h version.
binutils/
* objdump.c (load_specific_debug_section): Don't compare section
size against file size.
(dump_relocs_in_section): Don't compare reloc size against file size.
Print "failed to read relocs" on bfd_get_reloc_upper_bound error.
Andreas Krebbel [Tue, 12 Mar 2019 13:23:10 +0000 (14:23 +0100)]
Add missing changelogs for previous commits.
Andreas Krebbel [Tue, 12 Mar 2019 13:09:55 +0000 (14:09 +0100)]
S/390: arch13: Adjust to recent changes
opcodes/ChangeLog:
2019-03-12 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-opc.txt: Rename selhhhr to selfhr. Remove optional operand
from vstrszb, vstrszh, and vstrszf.
gas/ChangeLog:
2019-03-12 Andreas Krebbel <krebbel@linux.ibm.com>
* testsuite/gas/s390/zarch-arch13.s: Adjust testcase to optable changes.
* testsuite/gas/s390/zarch-arch13.d: Likewise.
Andreas Krebbel [Tue, 12 Mar 2019 13:09:55 +0000 (14:09 +0100)]
S/390: arch13: Add instruction descriptions
opcodes/ChangeLog:
2019-03-12 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-opc.txt: Add instruction descriptions.
GDB Administrator [Tue, 12 Mar 2019 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Mon, 11 Mar 2019 16:22:17 +0000 (10:22 -0600)]
Remove redundant assignment from dwarf2_find_containing_comp_unit
dwarf2_find_containing_comp_unit has two assignments to "this_cu" in
quick succession, both of which are just:
this_cu = dwarf2_per_objfile->all_comp_units[low];
... with no intervening assignments.
This patch removes the second assignment. I'm checking this in as
obvious. Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-03-11 Tom Tromey <tromey@adacore.com>
* dwarf2read.c (dwarf2_find_containing_comp_unit): Remove
redundant assignment to "this_cu".
GDB Administrator [Mon, 11 Mar 2019 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 10 Mar 2019 00:01:08 +0000 (00:01 +0000)]
Automatic date update in version.in
Simon Marchi [Fri, 8 Mar 2019 15:15:12 +0000 (10:15 -0500)]
Remove unnecessary cases from rank_one_type's switch
We return INCOMPATIBLE_TYPE_BADNESS for all these type codes, so we might as
well just let them go to the default case.
Incidentally, this patch also makes this false positive error go away when
compiling with gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0, default compiler on
Ubuntu 18.04.
CXX gdbtypes.o
/home/smarchi/src/binutils-gdb/gdb/gdbtypes.c: In function ‘rank rank_one_type(type*, type*, value*)’:
/home/smarchi/src/binutils-gdb/gdb/gdbtypes.c:4259:1: error: control reaches end of non-void function [-Werror=return-type]
}
^
gdb/ChangeLog:
* gdbtypes.c (rank_one_type): Remove unnecessary cases from switch.
Simon Marchi [Fri, 8 Mar 2019 15:15:11 +0000 (10:15 -0500)]
Split rank_one_type_parm_set from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_set): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:11 +0000 (10:15 -0500)]
Split rank_one_type_parm_struct from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_struct): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:11 +0000 (10:15 -0500)]
Split rank_one_type_parm_complex from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_complex): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:10 +0000 (10:15 -0500)]
Split rank_one_type_parm_float from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_float): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:10 +0000 (10:15 -0500)]
Split rank_one_type_parm_bool from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_bool): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:09 +0000 (10:15 -0500)]
Split rank_one_type_parm_range from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_range): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:09 +0000 (10:15 -0500)]
Split rank_one_type_parm_char from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_char): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:09 +0000 (10:15 -0500)]
Split rank_one_type_parm_enum from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_enum): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:08 +0000 (10:15 -0500)]
Split rank_one_type_parm_int from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_int): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:08 +0000 (10:15 -0500)]
Split rank_one_type_parm_func from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_func): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:08 +0000 (10:15 -0500)]
Split rank_one_type_parm_array from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_array): New function extracted
from...
(rank_one_type): ... this.
Simon Marchi [Fri, 8 Mar 2019 15:15:07 +0000 (10:15 -0500)]
Split rank_one_type_parm_ptr from rank_one_type
gdb/ChangeLog:
* gdbtypes.c (rank_one_type_parm_ptr): New function extracted
from...
(rank_one_type): ... this.
Philippe Waroquiers [Sat, 9 Mar 2019 11:25:11 +0000 (12:25 +0100)]
Ensure 'help set/show print inferior-events' shows the example events.
Without this patch, the help stops after 'e.g.' :
(gdb) apropos \(inferior\|thread\) event
set print inferior-events -- Set printing of inferior events (e.g.
set print thread-events -- Set printing of thread events (such as thread start and exit)
show print inferior-events -- Show printing of inferior events (e.g.
show print thread-events -- Show printing of thread events (such as thread start and exit)
Using the same notation as for the thread evenets (i.e. 'such as') gives:
(gdb) apropos \(inferior\|thread\) event
set print inferior-events -- Set printing of inferior events (such as inferior start and exit)
set print thread-events -- Set printing of thread events (such as thread start and exit)
show print inferior-events -- Show printing of inferior events (such as inferior start and exit)
show print thread-events -- Show printing of thread events (such as thread start and exit)
Eli Zaretskii [Sat, 9 Mar 2019 06:44:56 +0000 (08:44 +0200)]
Support styling on native MS-Windows console
gdb/ChangeLog:
2019-03-08 Eli Zaretskii <eliz@gnu.org>
PR/24315
* utils.c (can_emit_style_escape) [_WIN32]: Don't disable styling
on MS-Windows if $TERM is not defined.
* cli/cli-style.c: Set cli_styling to 1 in the MinGW build.
* posix-hdep.c (gdb_console_fputs):
* mingw-hdep.c (rgb_to_16colors, gdb_console_fputs): New
functions.
* ui-file.h (gdb_console_fputs): Add prototype.
* ui-file.c (stdio_file::puts): Call gdb_console_fputs, and fall
back to fputs only if the former returns zero.
GDB Administrator [Sat, 9 Mar 2019 00:00:30 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Fri, 8 Mar 2019 12:11:55 +0000 (22:41 +1030)]
PR24311, FAIL: S-records with constructors
Not padding string merge section output to its alignment can cause
failures of the S-record tests when input string merge sections are
padded, since the ELF linker output for the single string section
would shrink compared to the SREC linker output. That might result in
following sections having different addresses.
On the other hand, padding string merge section output when input
string merge sections are *not* padded can also cause failures, in
this case due to the ELF linker output for the string section being
larger (due to padding) than the SREC linker output.
It would be better to write a more robust test, but it is also nice
to leave input unchanged when no string merges occur.
PR 24311
* merge.c (merge_strings): Return secinfo. Don't pad section
to alignment here.
(_bfd_merge_sections): Pad section to alignment here, if input
sections contributing to merged output all pad to alignment.
Formatting.
GDB Administrator [Fri, 8 Mar 2019 00:00:42 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Thu, 7 Mar 2019 11:20:19 +0000 (04:20 -0700)]
C++-ify bcache
This somewhat C++-ifies bcache. It replaces bcache_xmalloc and
bcache_xfree with constructors; changes some functions into methods;
and changes various structures to include a bcache directly (as
opposed to a pointer to a bcache).
Tested by the buildbot.
gdb/ChangeLog
2019-03-07 Tom Tromey <tom@tromey.com>
* symmisc.c (print_symbol_bcache_statistics): Update.
(print_objfile_statistics): Update.
* symfile.c (allocate_symtab): Update.
* stabsread.c: Don't include bcache.h.
* psymtab.h (struct psymbol_bcache): Don't declare.
(class psymtab_storage) <psymbol_cache>: Now a bcache.
(psymbol_bcache_init, psymbol_bcache_free)
(psymbol_bcache_get_bcache): Don't declare.
* psymtab.c (struct psymbol_bcache): Remove.
(psymtab_storage::psymtab_storage): Update.
(psymtab_storage::~psymtab_storage): Update.
(psymbol_bcache_init, psymbol_bcache_free)
(psymbol_bcache_get_bcache, psymbol_bcache_full): Remove.
(add_psymbol_to_bcache): Update.
(allocate_psymtab): Update.
* objfiles.h (struct objfile_per_bfd_storage) <filename_cache,
macro_cache>: No longer pointers.
* objfiles.c (get_objfile_bfd_data): Don't call bcache_xmalloc.
(free_objfile_per_bfd_storage): Don't call bcache_xfree.
* macrotab.c (macro_bcache): Update.
* macroexp.c: Don't include bcache.h.
* gdbtypes.c (check_types_worklist): Update.
(types_deeply_equal): Remove TRY/CATCH. Update.
* elfread.c (elf_symtab_read): Update.
* dwarf2read.c: Don't include bcache.h.
* buildsym.c (buildsym_compunit::get_macro_table): Update.
* bcache.h (bcache, bcache_full, bcache_xffree, bcache_xmalloc)
(print_bcache_statistics, bcache_memory_used): Don't declare.
(struct bcache): Move from bcache.c. Add constructor, destructor,
methods. Rename all data members.
* bcache.c (struct bcache): Move to bcache.h.
(bcache::expand_hash_table): Rename from expand_hash_table.
(bcache): Remove.
(bcache::insert): Rename from bcache_full.
(bcache::compare): Rename from bcache_compare.
(bcache_xmalloc): Remove.
(bcache::~bcache): Rename from bcache_xfree.
(bcache::print_statistics): Rename from print_bcache_statistics.
(bcache::memory_used): Rename from bcache_memory_used.
Pedro Alves [Thu, 7 Mar 2019 16:35:06 +0000 (16:35 +0000)]
Fix normal_stop latent bug
TARGET_WAITKIND_NO_RESUMED doesn't have an associated event thread, so
we shouldn't be referring to inferior_thread() assuming it points to
one.
This was caught on the multi-target branch, where we always switch to
no-thread-selected whenever we start handling an event, exactly to
catch places that incorrectly use "inferior_ptid/inferior_thread()"
without switching to the right event thread / target.
Here, on the branch, we assert in inferior_thread() because
TARGET_WAITKIND_NO_RESUMED doesn't have an associated event thread, so
inferior_ptid is still null_ptid.
gdb/ChangeLog:
2019-03-07 Pedro Alves <palves@redhat.com>
* infrun.c (normal_stop): Also check for
TARGET_WAITKIND_NO_RESUMED before referring to inferior_thread().
Andrew Burgess [Thu, 7 Mar 2019 14:53:37 +0000 (14:53 +0000)]
gdb: Move value_from_host_double into value.c and make more use of it
The function value_from_host_double can be moved from f-lang.c into
value.c as a generally useful function, and then used more widely.
Tested on X86-64/GNU Linux with no regressions.
gdb/ChangeLog:
* f-lang.c (value_from_host_double): Moved to...
* value.c (value_from_host_double): ...here.
* value.h (value_from_host_double): Declare.
* guile/scm-math.c (vlscm_convert_typed_number): Use
value_from_host_double.
(vlscm_convert_number): Likewise.
* guile/scm-value.c (gdbscm_value_to_real): Likewise.
* python/py-value.c (convert_value_from_python): Likewise.
GDB Administrator [Thu, 7 Mar 2019 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Mon, 28 Jan 2019 17:51:01 +0000 (10:51 -0700)]
Use SCOPE_EXIT in write_gcore_file
This replaces a TRY/CATCH in write_gcore_file with a use of SCOPE_EXIT
instead. I find that this is simpler to understand.
2019-03-06 Tom Tromey <tom@tromey.com>
* gcore.c (write_gcore_file): Use SCOPE_EXIT.
Tom Tromey [Thu, 24 Jan 2019 16:58:29 +0000 (09:58 -0700)]
Remove free_current_contents
free_current_contents is no longer used, so this patch removes it.
2019-03-06 Tom Tromey <tom@tromey.com>
* utils.h (free_current_contents): Don't declare.
* utils.c (free_current_contents): Remove.
Tom Tromey [Thu, 24 Jan 2019 16:56:49 +0000 (09:56 -0700)]
Remove basic cleanup code
This removes the basic cleanup code: make_cleanups, do_cleanups,
discard_cleanups, and friends. This code is no longer needed, as
nothing in gdb makes an ordinary cleanup. Final cleanups are still
needed.
2019-03-06 Tom Tromey <tom@tromey.com>
* top.c (quit_force): Update.
* main.c (captured_command_loop): Update.
* common/new-op.c (operator new): Update.
* common/common-exceptions.c (struct catcher)
<save_cleanup_chain>: Remove member.
(exceptions_state_mc_init): Update.
(exception_try_scope_entry): Return nullptr.
(exception_try_scope_exit, exception_rethrow)
(throw_exception_sjlj, throw_exception_cxx): Update.
* common/cleanups.h (make_cleanup, make_cleanup_dtor)
(all_cleanups, do_cleanups, discard_cleanups)
(discard_final_cleanups, save_cleanups, save_final_cleanups)
(restore_cleanups, restore_final_cleanups): Don't declare.
(do_final_cleanups): Remove parameter.
* common/cleanups.c (cleanup_chain, make_cleanup)
(make_cleanup_dtor, all_cleanups, do_cleanups)
(discard_my_cleanups, discard_cleanups)
(discard_final_cleanups, save_my_cleanups, save_cleanups)
(save_final_cleanups, restore_my_cleanups, restore_cleanups)
(null_cleanup): Remove.
(do_final_cleanups): Remove parameter.
Tom Tromey [Thu, 14 Feb 2019 23:10:01 +0000 (16:10 -0700)]
Use unique_xmalloc_ptr in remote.c
This removes a cleanup from remote.c, replacing it with
unique_xmalloc_ptr.
2019-03-06 Tom Tromey <tom@tromey.com>
* remote.c (remote_target::remote_parse_stop_reply): Use
unique_xmalloc_ptr.
Tom Tromey [Thu, 24 Jan 2019 16:51:19 +0000 (09:51 -0700)]
Remove last cleanups from stabsread.c
This removes the last cleanups from stabsread.c. Similar code in
dwarf2read.c was C++-ified, but considering that stabs are deprecated,
it seemed simpler to just change these allocations to use an obstack
and leave the data structures in place.
This patch renames field_info to stabs_field_info -- adding a
constructor here provoked a bug due to the resulting ODR violation.
2019-03-06 Tom Tromey <tom@tromey.com>
* stabsread.c (struct stabs_field_info): Rename from field_info.
<list, fnlist>: Add initializers.
<obstack>: New member.
(read_member_functions, read_struct_fields, read_baseclasses):
Allocate on obstack. Don't use cleanups.
(read_one_struct_field, read_member_functions, read_struct_fields)
(read_baseclasses, read_tilde_fields, attach_fn_fields_to_type)
(attach_fields_to_type, read_cpp_abbrev, read_member_functions)
(read_struct_type): Update.
Tom Tromey [Thu, 24 Jan 2019 13:43:45 +0000 (06:43 -0700)]
Remove last cleanup from linux-namespaces.c
This removes the last cleanup from linux-namespaces.c, replacing it
with a use of SCOPE_EXIT.
2019-03-06 Tom Tromey <tom@tromey.com>
* nat/linux-namespaces.c (linux_mntns_access_fs): Use SCOPE_EXIT.
* common/filestuff.h (make_cleanup_close): Don't declare.
* common/filestuff.c (do_close_cleanup, make_cleanup_close):
Remove.
Tom Tromey [Thu, 24 Jan 2019 13:38:59 +0000 (06:38 -0700)]
Remove last cleanup solib-aix.c
This removes the last cleanup solib-aix.c, replacing it with a use of
make_scope_exit.
2019-03-06 Tom Tromey <tom@tromey.com>
* solib-aix.c: Use make_scope_exit.
Tom Tromey [Thu, 24 Jan 2019 13:41:12 +0000 (06:41 -0700)]
Remove last cleanups from solib-svr4.c
This removes the last cleanups from solib-svr4.c, replacing them with
uses of make_scope_exit.
2019-03-06 Tom Tromey <tom@tromey.com>
* solib-svr4.c (svr4_parse_libraries, svr4_current_sos_direct):
Use make_scope_exit.
Tom Tromey [Thu, 24 Jan 2019 05:23:15 +0000 (22:23 -0700)]
Remove cleanup from solib-svr4.c
This removes a cleanup from solib-svr4.c, replacing it with
make_scope_exit.
2019-03-06 Tom Tromey <tom@tromey.com>
* solib-svr4.c (disable_probes_interface): Remove parameter.
(svr4_handle_solib_event): Use make_scope_exit.
Tom Tromey [Thu, 24 Jan 2019 05:20:04 +0000 (22:20 -0700)]
Remove last cleanup from gdbserver
This removes the last cleanup from gdbserver, replacing it with
SCOPE_EXIT. This could perhaps be done in a different way, but this
approach was direct and obviously correct.
2019-03-06 Tom Tromey <tom@tromey.com>
* server.c (detach_or_kill_for_exit_cleanup): Remove parameter.
(captured_main): Use SCOPE_EXIT.
Tom Tromey [Thu, 24 Jan 2019 05:16:53 +0000 (22:16 -0700)]
C++ify remote notification code
This C++ifies the remote notification code -- replacing function
pointers with virtual methods and using unique_ptr. This allows for
the removal of some cleanups.
2019-03-06 Tom Tromey <tom@tromey.com>
* remote.c (struct stop_reply_deleter): Remove.
(stop_reply_up): Update.
(struct stop_reply): Derive from notif_event. Don't typedef.
<regcache>: Now a std::vector.
(stop_reply_xfree): Remove.
(stop_reply::~stop_reply): Rename from stop_reply_dtr.
(remote_notif_stop_alloc_reply): Return a unique_ptr. Use new.
(remote_target::discard_pending_stop_replies): Use delete.
(remote_target::remote_parse_stop_reply): Update.
(remote_target::process_stop_reply): Update.
* remote-notif.h (struct notif_event): Add virtual destructor.
Remove "dtr" member.
(struct notif_client) <alloc_event>: Return a unique_ptr.
(notif_event_xfree): Don't declare.
(notif_event_up): New typedef.
* remote-notif.c (remote_notif_ack, remote_notif_parse): Update.
(notif_event_xfree, do_notif_event_xfree): Remove.
(remote_notif_state_xfree): Update.
Tom Tromey [Wed, 23 Jan 2019 23:28:28 +0000 (16:28 -0700)]
Change displaced_step_clear_cleanup to a forward_scope_exit
This changes displaced_step_clear_cleanup to be a forward_scope_exit
and updates the callers.
gdb/ChangeLog
2019-03-06 Tom Tromey <tom@tromey.com>
* infrun.c (displaced_step_clear_cleanup): Now a
forward_scope_exit type.
(displaced_step_prepare_throw): Update.
(displaced_step_fixup): Update.
Tom Tromey [Wed, 23 Jan 2019 22:11:42 +0000 (15:11 -0700)]
Update two cleanup comments
This updates another couple of comments to remove mentions of
cleanups.
gdb/ChangeLog
2019-03-06 Tom Tromey <tom@tromey.com>
* inferior.h (class inferior): Update comment.
* gdbthread.h (class thread_info): Update comment.
This page took 0.056332 seconds and 4 git commands to generate.