Jeff Law [Wed, 12 Oct 1994 16:13:51 +0000 (16:13 +0000)]
* partial-stab.h (N_TEXT): Delete GDB_TARGET_IS_HPPA kludge; they
are no longer needed as of gcc-2.6.0.
Ian Lance Taylor [Wed, 12 Oct 1994 15:57:28 +0000 (15:57 +0000)]
* Makefile.in (INSTALL): Use top level install.sh script.
* config/README (INSTALL): Remove.
* config/delta88.mh (INSTALL): Remove.
* config/i386v4.mh (INSTALL): Remove.
* config/irix4.mh (INSTALL): Remove.
* config/irix5.mh (INSTALL): Remove.
* config/ncrt3000.mh (INSTALL): Remove.
Ken Raeburn [Wed, 12 Oct 1994 06:56:16 +0000 (06:56 +0000)]
shut up if only a subset was checked out in the first place
Ken Raeburn [Wed, 12 Oct 1994 05:46:05 +0000 (05:46 +0000)]
* Makefile.in (bootstrap, bootstrap2, bootstrap3): Create a "stage" symlink to
the appropriate stage* directory, and use it instead in the -B options.
(comparison): Revert yesterday's change.
Ken Raeburn [Wed, 12 Oct 1994 05:41:45 +0000 (05:41 +0000)]
* config/tc-sparc.c (tc_gen_reloc): For non-a.out relocations, if pc-relative,
use fx_offset only, ignore address of relocation.
Rob Savoye [Wed, 12 Oct 1994 03:34:08 +0000 (03:34 +0000)]
Breakpoints work, run works. Fixed "monitor" command.
Karen Christiansen [Tue, 11 Oct 1994 23:59:43 +0000 (23:59 +0000)]
updating to match changes made to progressive/build-all.mk
Rob Savoye [Tue, 11 Oct 1994 22:12:30 +0000 (22:12 +0000)]
Writing to memory now works for both targets.
Ian Lance Taylor [Tue, 11 Oct 1994 21:40:54 +0000 (21:40 +0000)]
Tue Oct 11 13:57:56 1994 Eric Youngdale (eric@andante.aib.com)
* elf32-i386.c (elf_i386_check_relocs): Make sure that a symbol
with a global offset table entry or a procedure linkage table
entry is added to the dynamic symbol table.
* elf32-sparc.c (elf32_sparc_check_relocs): Likewise.
* elf32-i386.c (elf_i386_adjust_dynamic_symbol): If a symbol has
already gotten a procedure linkage table entry, change the
definition to the PLT entry.
* elf32-sparc.c (elf32_sparc_adjust_dynamic_symbol): Likewise.
Ian Lance Taylor [Tue, 11 Oct 1994 21:13:45 +0000 (21:13 +0000)]
* lynx-core.c (lynx_core_file_p): SPARC Lynx appears to start
dumping the .data section in a core file at a page boundary.
Ian Lance Taylor [Tue, 11 Oct 1994 21:08:57 +0000 (21:08 +0000)]
* lynx-nat.c (child_wait): Correct handling of byte reversed SPARC
Lynx wait status.
(fetch_core_registers): Don't try to fetch a register if
regmap maps it to -1.
* sparc-tdep.c (sparc_frame_find_saved_regs): Use FRAME_SAVED_I0
and FRAME_SAVED_L0 when setting saved_regs_addr. SPARC Lynx
stores the registers in a weird order.
These patches make SPARC Lynx gdb usable, though it still has problems.
Jason Merrill [Tue, 11 Oct 1994 19:43:48 +0000 (19:43 +0000)]
Tue Oct 11 12:12:29 1994 Jason Merrill (jason@phydeaux.cygnus.com)
* Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
-fexternal-templates.
Because libstdc++ won't build with -fexternal-templates.
Ian Lance Taylor [Tue, 11 Oct 1994 19:25:42 +0000 (19:25 +0000)]
* config/tc-mips.c (mips_ip): Don't use S_IS_LOCAL when checking
for an embedded PIC switch expression, since the definition of
S_IS_LOCAL was changed.
Jason Merrill [Tue, 11 Oct 1994 19:13:46 +0000 (19:13 +0000)]
Tue Oct 11 12:12:29 1994 Jason Merrill (jason@phydeaux.cygnus.com)
* configure.in (target_libs): Add libstdc++.
(noconfigdirs): Add libstdc++ as appropriate.
Ken Raeburn [Tue, 11 Oct 1994 19:12:55 +0000 (19:12 +0000)]
* Makefile.in (comparison): When comparing as.new or gasp.new, try running the
binary through sed to avoid differences due to "stage1" or "stage2" having been
written into the binary.
Rob Savoye [Tue, 11 Oct 1994 04:37:18 +0000 (04:37 +0000)]
Memory_reads_inferior() and monitor_fetch_registers() now work good on
both targets. On to the "set" functions...
David Edelsohn [Mon, 10 Oct 1994 21:04:34 +0000 (21:04 +0000)]
Keep/lose arc stuff.
J.T. Conklin [Mon, 10 Oct 1994 20:54:28 +0000 (20:54 +0000)]
* nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
ctor/dtor tables needed by C++ programs are built.
Ken Raeburn [Mon, 10 Oct 1994 20:38:06 +0000 (20:38 +0000)]
* cofflink.c (_bfd_coff_final_link): Cast argument to bfd_h_put_32 to correct
type.
(coff_read_string_table): Cast argument to bfd_h_get_32 to correct type.
* elfcode.h (elf_link_output_extsym): Cast argument to bfd_elf_hash to correct
type.
Ken Raeburn [Mon, 10 Oct 1994 20:30:32 +0000 (20:30 +0000)]
* elf32-sparc.c (elf_sparc_howto_table): The PC10, PC22, and WPLT30 relocations
are PC-relative.
David Edelsohn [Mon, 10 Oct 1994 17:24:43 +0000 (17:24 +0000)]
Move COPYING.NEWLIB to cygnus_files.
Don't want it appearing in fsf releases!
Jim Wilson [Mon, 10 Oct 1994 01:06:20 +0000 (01:06 +0000)]
* Makefile.in (srconv.o): Add dependence on sysroff.c.
Jim Kingdon [Sun, 9 Oct 1994 14:52:02 +0000 (14:52 +0000)]
* gdb.base/corefile.exp: Add (xfail'd) test for reinit_frame_cache
bug involving using inferior_pid to figure out whether to select a
frame.
Jim Kingdon [Sun, 9 Oct 1994 04:02:32 +0000 (04:02 +0000)]
* blockframe.c (reinit_frame_cache): Reinstate select_frame call
if inferior_pid is nonzero.
Peter Schauer [Sat, 8 Oct 1994 11:55:45 +0000 (11:55 +0000)]
* config/sparc/tm-sparc.h: Add PARAMS declarations to all
function declarations.
Peter Schauer [Sat, 8 Oct 1994 11:54:29 +0000 (11:54 +0000)]
Speed up GDB startup time by not demangling partial symbols.
* symfile.h (ADD_PSYMBOL_VT_TO_LIST),
symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
No longer demangle partial symbols.
* symtab.c (lookup_symbol, list_symbols): Handle mangled
variables, e.g. C++ static members, via the minimal symbols.
Handle reordered functions in an objfile, for Irix 5.2 shared
libraries.
* objfiles.h (OBJF_REORDERED): New bit in the objfile flags,
set if the functions in an objfile are reordered.
* mdebugread.c (parse_partial_symbols): Detect reordered
functions in an objfile.
* symtab.c (find_pc_psymtab, find_pc_symtab): Use expensive
lookup algorithm if the functions in the objfile are reordered.
* xcoffexec.c (exec_close): If the current target has a copy
of the exec_ops sections, reflect the freeing of the sections
in current_target.
* valops.c (call_function_by_hand): Use `sizeof dummy1', not
`sizeof dummy', for constructing the call dummy code.
* config/sparc/tm-sparc.h: Add PARAMS declarations to all
function declarations.
* sparc-tdep.c (sparc_pop_frame): Cast result of
read_memory_integer to CORE_ADDR when passing it to PC_ADJUST.
* irix5-nat.c (enable_break): Set breakpoint at the entry point
of the executable, to handle the case where main resides in a
shared library.
* irix5-nat.c (solib_create_inferior_hook): Reset stop_soon_quietly
after shared library symbol reading, to get rid of a warning from
heuristic_proc_start if the startup code has no symbolic debug info.
* breakpoint.h (struct breakpoint): Add new fields language
and input_radix, to enable breakpoint resetting with the
proper language and radix.
* breakpoint.c (set_raw_breakpoint): Initialize them.
(breakpoint_re_set_one): Use them when resetting the breakpoint.
(breakpoint_re_set): Preserve current language and input_radix
across breakpoint_re_set_one calls.
* symtab.c (decode_line_1): Do not build a canonical line
specification for `*expr' line specifications.
* breakpoint.h (bpstat_stop_status): Fix prototype declaration.
Ken Raeburn [Sat, 8 Oct 1994 07:55:52 +0000 (07:55 +0000)]
elf fixes
Jim Kingdon [Sat, 8 Oct 1994 03:41:21 +0000 (03:41 +0000)]
The point of these changes is to avoid reading the frame pointer
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
Ken Raeburn [Fri, 7 Oct 1994 22:06:01 +0000 (22:06 +0000)]
coff aux/lineno, m88k, vms/flagseen changes
Ken Raeburn [Fri, 7 Oct 1994 22:02:54 +0000 (22:02 +0000)]
* config/obj-coff.c (do_relocs_for): Test only TC_KEEP_FX_OFFSET, rather than
both it and TC_M88K.
(coff_adjust_section_syms): New function.
(coff_frob_section): For non-empty sections, create aux entry for the section
symbol, indicating the size.
(n_line_nos): New variable.
(add_lineno): Increment it.
(coff_add_linesym): Increment n_line_nos, don't call add_lineno.
(coff_frob_file): New function; map coff_adjust_section_syms over sections.
(obj_coff_line): Only reset line_base for .bf symbols.
* config/obj-coff.h (coff_adjust_section_syms, coff_frob_file): Declare.
(obj_frob_file): New macro.
* config/obj-coff.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Renamed from
obj_frob_forward_symbol, and rewritten for new parameter list.
Ken Raeburn [Fri, 7 Oct 1994 22:00:18 +0000 (22:00 +0000)]
define TC_KEEP_FX_OFFSET
Ken Raeburn [Fri, 7 Oct 1994 22:00:01 +0000 (22:00 +0000)]
Mon Oct 3 21:02:38 1994 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.h (S_IS_LOCAL): fix obsolete flagseen[] reference.
Ian Lance Taylor [Fri, 7 Oct 1994 16:33:35 +0000 (16:33 +0000)]
whoops
Ian Lance Taylor [Fri, 7 Oct 1994 16:20:21 +0000 (16:20 +0000)]
* top.c (target_byte_order_auto): New static variable.
(set_endian): Mention that ``auto'' is permitted.
(set_endian_auto): New static function.
(show_endian): Change message based on target_byte_order_auto.
(set_endian_from_file): New function.
(init_main): Add command ``auto'' to endianlist.
* exec.c (exec_file_command): Call set_endian_from_file.
* defs.h (set_endian_from_file): Declare.
J.T. Conklin [Fri, 7 Oct 1994 01:17:02 +0000 (01:17 +0000)]
* nlm/i386.c (flush_i_cache): New function, does nothing.
(frame_to_registers, registers_to_frame, set_step_traps,
clear_step_traps, do_status): Make non-static.
Per Bothner [Fri, 7 Oct 1994 01:06:03 +0000 (01:06 +0000)]
* config.guess: Update from FSF.
Ian Lance Taylor [Thu, 6 Oct 1994 16:47:32 +0000 (16:47 +0000)]
* defs.h: If TARGET_BYTE_ORDER_SELECTABLE is defined by tm.h,
define TARGET_BYTE_ORDER as target_byte_order, and declare
target_byte_order as an extern int, and define BITS_BIG_ENDIAN as
a test of TARGET_BYTE_ORDER.
* top.c: Several additions if TARGET_BYTE_ORDER_SELECTABLE is
defined:
(endianlist, target_byte_order): New variables.
(set_endian, set_endian_big, set_endian_little): New functions.
(show_endian): New function.
(init_cmd_lists): Initialize endianlist.
(init_main): Add commands ``set endian big'', ``set endian
little'', and ``show endian''.
* a29k-pinsn.c: Rewrite uses of TARGET_BYTE_ORDER and
BITS_BIG_ENDIAN to switch at run time rather than at compile time.
* coffread.c, dwarfread.c, findvar.c, mips-tdep.c: Likewise.
* remote-os9k.c, stabsread.c, valarith.c, valprint.c: Likewise.
* values.c: Likewise.
* mips-tdep.c: Rewrite uses of GDB_TARGET_IS_MIPS64 to switch at
run time rather than at compile time.
Ian Lance Taylor [Thu, 6 Oct 1994 16:43:40 +0000 (16:43 +0000)]
* config/mips/tm-mips.h (GDB_TARGET_IS_MIPS64): If not already
defined, define as 0.
(FIX_CALL_DUMMY): Rewrite to remove presumption that host and
target are similar.
* config/mips/tm-idt.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
* config/mips/tm-idtl.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
* config/mips/tm-idt64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
(BREAKPOINT): Remove definition.
* config/mips/tm-idtl64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
(BREAKPOINT): Remove definition.
* config/mips/tm-mips64.h (GDB_TARGET_IS_MIPS64): Define with a
value of 1, rather than without a value.
* config/mips/tm-bigmips64.h (GDB_TARGET_IS_MIPS64): Likewise.
Ian Lance Taylor [Thu, 6 Oct 1994 16:42:52 +0000 (16:42 +0000)]
* remote-mips.c (break_insn): Remove.
(BREAK_INSN, BREAK_INSN_SIZE): Define.
(mips_insert_breakpoint): Use BREAK_INSN, not break_insn.
(mips_remove_breakpoint): Likewise.
Rob Savoye [Thu, 6 Oct 1994 05:28:49 +0000 (05:28 +0000)]
Both targets initialize, can dump registers too.
Brendan Kehoe [Wed, 5 Oct 1994 21:32:42 +0000 (21:32 +0000)]
* Makefile.in (all-prms): Depend on all-librx.
J.T. Conklin [Wed, 5 Oct 1994 21:01:54 +0000 (21:01 +0000)]
* nlm/configure.in: ${gdb_host_cpu} defaults to ${host_cpu}.
J.T. Conklin [Wed, 5 Oct 1994 18:45:58 +0000 (18:45 +0000)]
yet another typo
J.T. Conklin [Wed, 5 Oct 1994 18:44:56 +0000 (18:44 +0000)]
* nlm/Makefile.in: Get rid of NWINCLUDES.
* config/{alpha,powerpc}/gdbserve.mt: Remove NWINCLUDES.
User should now configure with --with-headers.
Ian Lance Taylor [Wed, 5 Oct 1994 18:43:30 +0000 (18:43 +0000)]
* archive.c (bfd_construct_extended_name_table): SVR4 uses slash
newline at the end of the file name, not just newline.
J.T. Conklin [Wed, 5 Oct 1994 18:43:12 +0000 (18:43 +0000)]
Fix typo
J.T. Conklin [Wed, 5 Oct 1994 18:40:49 +0000 (18:40 +0000)]
* nlm/Makefile.in: Get rid of NWINCLUDES.
* config/{alpha,i386,powerpc}: Remove NWINCLUDES. User should
now configure with --with-headers.
Ian Lance Taylor [Wed, 5 Oct 1994 04:13:29 +0000 (04:13 +0000)]
* config/obj-coff.c (coff_frob_section): Remove assert about
section alignment.
* config/tc-sparc.c (md_section_align): Use section alignment, not
xvec align_power_min field.
Jeff Law [Tue, 4 Oct 1994 23:30:39 +0000 (23:30 +0000)]
Add ChangeLog entry that (apparently) I nuked.
Ian Lance Taylor [Tue, 4 Oct 1994 21:30:45 +0000 (21:30 +0000)]
* ecoff.c (_bfd_ecoff_new_section_hook): Default section alignment
power to 4, rather than using align_power_min.
Ian Lance Taylor [Tue, 4 Oct 1994 21:13:51 +0000 (21:13 +0000)]
* coffcode.h (coff_new_section_hook): Don't use align_power_min;
use COFF_DEFAULT_SECTION_ALIGNMENT_POWER instead. Force the .stab
and .stabstr sections to be aligned to no more than 2. Remove
COFF_SPARC special cases.
* coff-a29k.c: Define COFF_DEFAULT_SECTION_ALIGNMENT_POWER.
* coff-apollo.c, coff-go32.c, coff-h8300.c: Likewise.
* coff-h8500.c, coff-i386.c, coff-i960.c, coff-m68k.c: Likewise.
* coff-m88k.c, coff-rs6000.c, coff-sh.c, coff-sparc.c: Likewise.
* coff-we32k.c, coff-z8k.c: Likewise.
PR 5706.
Ian Lance Taylor [Tue, 4 Oct 1994 16:18:19 +0000 (16:18 +0000)]
* configure.in: Use ${config_shell} when running config.bfd.
Ian Lance Taylor [Tue, 4 Oct 1994 16:06:32 +0000 (16:06 +0000)]
* configure: Use ${config_shell} when running ${configsub}.
Ian Lance Taylor [Tue, 4 Oct 1994 15:54:27 +0000 (15:54 +0000)]
* cofflink.c (coff_link_input_bfd): Don't try to convert a long
filename if the offset field is zero.
Ian Lance Taylor [Tue, 4 Oct 1994 15:25:02 +0000 (15:25 +0000)]
* elfcode.h (swap_out_syms): If the alignment of a common symbol
was not set, use a sensible default rather than zero.
PR 5751.
David Edelsohn [Mon, 3 Oct 1994 21:30:15 +0000 (21:30 +0000)]
* config.sub: No longer recognize h8300h.
Ian Lance Taylor [Mon, 3 Oct 1994 16:41:46 +0000 (16:41 +0000)]
* config.sub: Remove extraneous differences between config.sub and
gcc/config.sub.
Jim Kingdon [Mon, 3 Oct 1994 14:51:22 +0000 (14:51 +0000)]
* gdbserver/server.c (main): Silently accept all unrecognized
requests and send back a zero length acknowledge. That is what
*-stub.c do and is what remote.c expects.
Peter Schauer [Mon, 3 Oct 1994 12:14:38 +0000 (12:14 +0000)]
* gdbserver/server.c (main): Silently accept query requests
and send back a zero length acknowledge.
Peter Schauer [Mon, 3 Oct 1994 12:13:46 +0000 (12:13 +0000)]
* corelow.c (core_open): Copy the modified to_sections_end
vector from current_target to core_ops too.
* gdbserver/server.c (main): Silently accept query requests
and send back a zero length acknowledge.
Peter Schauer [Mon, 3 Oct 1994 11:47:38 +0000 (11:47 +0000)]
* rs6000-core.c (rs6000coff_core_p): Set SEC_HAS_CONTENTS flag
for .stack and .ldinfo sections. Cast coredata.c_tab to a
file_ptr to avoid warnings from gcc.
Ken Raeburn [Sat, 1 Oct 1994 04:30:10 +0000 (04:30 +0000)]
Rewrote make-gas.com handling so that only "make realclean" will remove it.
Ken Raeburn [Sat, 1 Oct 1994 04:24:38 +0000 (04:24 +0000)]
got rid of make-gas.com
Ken Raeburn [Sat, 1 Oct 1994 04:24:29 +0000 (04:24 +0000)]
Makefile.in (DISTSTUFFDIRS): Add gas.
Ken Raeburn [Sat, 1 Oct 1994 04:20:16 +0000 (04:20 +0000)]
vms make-gas.com stuff
Ken Raeburn [Sat, 1 Oct 1994 04:18:46 +0000 (04:18 +0000)]
Now gets rebuilt by "make diststuff".
Ken Raeburn [Sat, 1 Oct 1994 04:17:56 +0000 (04:17 +0000)]
(diststuff): Build make-gas.com.
(clean, mostlyclean): Delete make-gas.com.
(realclean): Separate target, depend on clean and distclean.
Ken Raeburn [Sat, 1 Oct 1994 04:15:45 +0000 (04:15 +0000)]
Fri Sep 30 19:05:20 1994 Pat Rankin (rankin@eql.caltech.edu)
* vmsconf.sh (make-gas.com): handle DCL verification to enable
sensible feedback to the user while gas is being built.
Ken Raeburn [Sat, 1 Oct 1994 03:52:42 +0000 (03:52 +0000)]
i386 pic changes
as.h: __STDC__ -> varargs
write.* PLT changes
write.c,symbols.c debug changes
J.T. Conklin [Sat, 1 Oct 1994 00:25:13 +0000 (00:25 +0000)]
* nlm/Makefile.in: Get rid of NWINCLUDES.
* config/{alpha,powerpc}/gdbserve.mt: define NWINCLUDES.
Jim Kingdon [Fri, 30 Sep 1994 23:02:22 +0000 (23:02 +0000)]
* gdbserver/low-lynx.c (create_inferior): Pass all 4 args to ptrace.
Jim Kingdon [Fri, 30 Sep 1994 22:53:36 +0000 (22:53 +0000)]
* lynx-nat.c (child_wait): Use status.w_status, not status, in
arithmetic. status is a `union wait'.
Ken Raeburn [Fri, 30 Sep 1994 20:22:59 +0000 (20:22 +0000)]
yesterday's gdbinit changes
Ian Lance Taylor [Fri, 30 Sep 1994 17:13:08 +0000 (17:13 +0000)]
* elfcode.h (elf_bfd_final_link): Remove assertion when a non
SEC_IN_MEMORY section is found in dynobj. This can happen when
linking PIC compiled code.
Jim Kingdon [Fri, 30 Sep 1994 13:58:58 +0000 (13:58 +0000)]
* config/nm-lynx.h (PTRACE_ARG3_TYPE): Define to int, not char *.
* lynx-nat.c (child_wait): Pass fourth argument to ptrace.
Ian Lance Taylor [Fri, 30 Sep 1994 03:49:54 +0000 (03:49 +0000)]
* configure.in (configdirs): Change binutils.all to binutils-all.
Thomas Lord [Fri, 30 Sep 1994 00:36:58 +0000 (00:36 +0000)]
optionally configure libgui (--enable-gdbgui)
Ken Raeburn [Thu, 29 Sep 1994 23:03:07 +0000 (23:03 +0000)]
(all): Depend on .gdbinit.
(.gdbinit): Rebuild from gdbinit.in by running config.status.
Ken Raeburn [Thu, 29 Sep 1994 23:00:45 +0000 (23:00 +0000)]
* write.c (print_fixup): Print source location on first line. Show fx_r_type
and fx_addsy fields.
Ken Raeburn [Thu, 29 Sep 1994 20:51:57 +0000 (20:51 +0000)]
fix typu
Ken Raeburn [Thu, 29 Sep 1994 20:39:27 +0000 (20:39 +0000)]
* reloc.c (bfd_install_relocation): Change type of data to bfd_byte *, to go
along with yesterday's change.
Ken Raeburn [Thu, 29 Sep 1994 20:36:24 +0000 (20:36 +0000)]
* elf.c (bfd_elf_print_symbol): Moved here from elf_print_symbol in elfcode.h.
(case bfd_print_symbol_all): Print symbol's size field, except for common
symbols; print their alignment.
* elfcode.h (elf_print_symbol): Deleted.
* libelf.h (bfd_elf_print_symbol): Declare.
(bfd_elf{32,64}_print_symbol): Replace declarations with macros.
Ken Raeburn [Thu, 29 Sep 1994 20:29:54 +0000 (20:29 +0000)]
* syms.c (bfd_print_symbol_vandf): Show BSF_LOCAL and BSF_GLOBAL in one column.
Use the column freed up to show BSF_FUNCTION and BSF_FILE.
Ian Lance Taylor [Thu, 29 Sep 1994 16:46:53 +0000 (16:46 +0000)]
* VMS does not permits `.' in directory names. Renamed
binutils.all to binutils-all.
Ian Lance Taylor [Thu, 29 Sep 1994 16:42:43 +0000 (16:42 +0000)]
missed this file
Ian Lance Taylor [Thu, 29 Sep 1994 16:39:01 +0000 (16:39 +0000)]
* VMS does not permits `.' in directory names. Renamed
ld.bootstrap to ld-bootstrap, ld.cdtest to ld-cdtest, and
ld.scripts to ld-scripts.
Ian Lance Taylor [Thu, 29 Sep 1994 16:30:12 +0000 (16:30 +0000)]
* syms.c (stt): Add .rdata and .rodata.
PR 5714.
Jim Kingdon [Thu, 29 Sep 1994 15:26:16 +0000 (15:26 +0000)]
* xcoffread.c (read_xcoff_symtab): Fix comment for yesterday's change.
Jim Kingdon [Thu, 29 Sep 1994 15:09:51 +0000 (15:09 +0000)]
* coffread.c (complete_symtab): If last_source_file is set upon
entry, free it.
Jeff Law [Thu, 29 Sep 1994 05:03:18 +0000 (05:03 +0000)]
* hpread.c (hpread_read_array_type): Do not change the type code
to TYPE_CODE_PTR for "char foo[]". Just make it a zero length
array type.
Jeff Law [Thu, 29 Sep 1994 04:26:50 +0000 (04:26 +0000)]
* hpread.c (hpread_type_translate): Handle T_UNS_LONG types with
lengths other than 32bits (HP C 9.69 represents an "unsigned char"
as an T_UNS_LONG with length 8).
Jeff Law [Thu, 29 Sep 1994 03:29:07 +0000 (03:29 +0000)]
* gas/hppa/reloc/reduce.s: Renamed from relocreduce.s
* gas/hppa/reloc/reduce2.s: Renamed from relocreduce2.s
* gas/hppa/reloc/r_no_reloc.s: Renamed from r_no_relocbug.s
* gas/hppa/reloc/reloc.exp: Changed accordingly.
Jeff Law [Thu, 29 Sep 1994 03:25:03 +0000 (03:25 +0000)]
* gas/hppa/reloc/reduce.s: Renamed from relocreduce.s
* gas/hppa/reloc/reduce2.s: Renamed from relocreduce2.s
* gas/hppa/reloc/r_no_reloc.s: Renamed from r_no_relocbug.s
Ken Raeburn [Wed, 28 Sep 1994 23:24:07 +0000 (23:24 +0000)]
misc changes to configure.in, gdbinit.in, as.h, symbols.c
Ken Raeburn [Wed, 28 Sep 1994 23:16:59 +0000 (23:16 +0000)]
Move "break abort" to end, in case gdb complains.
Ken Raeburn [Wed, 28 Sep 1994 20:31:32 +0000 (20:31 +0000)]
forgot to hit ^x^s after deleting "#if 1" lines
Ken Raeburn [Wed, 28 Sep 1994 20:27:31 +0000 (20:27 +0000)]
(resolve_symbol_value, case O_symbol): Don't do any processing if add_symbol is
undefined or in expr_section.
(resolve_symbol_value, case O_add): For symbol plus constant-valued symbol,
convert to O_symbol and re-reduce.
(S_GET_VALUE): If symbol needs resolving, resolve it.
(indent_level): No longer static.
(print_symbol_value_1): Don't print frag address if it matches
zero_address_frag. Don't print "resolving" if already resolved. Print segment
name. Don't call print_expr_1 on an undefined symbol.
(print_expr_1): Fix whitespace before printing X_add_number.
Ian Lance Taylor [Wed, 28 Sep 1994 19:53:22 +0000 (19:53 +0000)]
* Makefile.in (arparse.c): Don't ignore errors from mv.
(sysinfo.c): Likewise. Also, depend upon arparse.c, to prevent a
parallel make from trying to build both arparse.c and sysinfo.c
simultaneously.
(nlmheader.c): Similar change.
(arparse.h): Separate target from arparse.c, so that a parallel
make does not try to build both at once. Depend upon arparse.c.
(sysinfo.h): Similar change.
Ian Lance Taylor [Wed, 28 Sep 1994 19:28:24 +0000 (19:28 +0000)]
* Makefile.in (gasp.o): Depends upon config.h.
Ken Raeburn [Wed, 28 Sep 1994 19:22:46 +0000 (19:22 +0000)]
write.c changes, Makefile.in version update
This page took 0.039594 seconds and 4 git commands to generate.