Laura Garcia Liebana [Sat, 27 Feb 2016 23:41:39 +0000 (00:41 +0100)]
staging: octeon: Move logical operators on the correct line
Logical continuations should be on the previous line. Checkpatch detected this issue.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Sat, 27 Feb 2016 17:51:47 +0000 (23:21 +0530)]
staging: octeon: Convert create_singlethread_workqueue()
With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop cvm_oct_poll_queue by using system_wq.
There are multiple work items per cvm_oct_poll_queue (viz.
cvm_oct_rx_refill_work, port_periodic_work) and different
cvm_oct_poll_queues need not be be ordered. Hence, concurrency
can be increased by switching to system_wq.
All work items are sync canceled in cvm_oct_remove() so it
is guaranteed that no work is in flight by the time exit path runs.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Marsh [Tue, 1 Mar 2016 10:29:38 +0000 (11:29 +0100)]
Staging: slicoss: changes comparisons to NULL in slicoss.c
This is a patch to slicoss.c to change the style of NULL comparisons in
order to remove checkpatch.pl warnings.
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Marsh [Tue, 1 Mar 2016 10:22:48 +0000 (11:22 +0100)]
Staging: slicoss: removes unnecessary blank lines in slicoss.c
This is a patch to slicoss.c to remove unnecessary blank lines as found
by checkpatch.pl
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Marsh [Tue, 1 Mar 2016 10:06:13 +0000 (11:06 +0100)]
Staging: slicoss: change memory allocation style in slicoss.c
This is a patch to slicoss.c to change the memory allocation style in
slicoss.c as found by checkpatch.pl
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Marsh [Tue, 1 Mar 2016 09:55:35 +0000 (10:55 +0100)]
Staging: slicoss: changes the style of memory allocation in slicoss.c
This is a patch to slicoss.c to change the memory allocation style as
identified by checkpatch.pl
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Marsh [Mon, 29 Feb 2016 11:37:34 +0000 (12:37 +0100)]
Staging: slicoss: changes memory allocation style in slicoss.c
This is a patch to slicoss.c that changes the memory allocation style as
identified by checkpatch.pl
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Marsh [Mon, 29 Feb 2016 11:33:30 +0000 (12:33 +0100)]
Staging: slicoss: memory allocation style change in slicoss.c
This is a patch to slicoss.c to change the memory allocation style as
identified by checkpatch.pl
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Ravichandran [Sun, 21 Feb 2016 21:31:44 +0000 (16:31 -0500)]
staging: slicoss: Eliminate commented out code
Remove commented out code to reduce code clutter.
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Thu, 10 Mar 2016 17:17:22 +0000 (22:47 +0530)]
staging: rtl8192u: ieee80211_crypt: Remove unnecessary else after return
This patch fixes the checkpatch warning that else is not generally
useful after a break or return.
This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
s1
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Tue, 1 Mar 2016 19:44:57 +0000 (01:14 +0530)]
Staging: rtl8192u: Replace random_ether_addr with eth_random_addr
The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Remove the wrapper function ieee80211_randomize_cell and replace its
call with eth_random_addr as it is wrapping random_ether_addr.
Done using coccinelle:
@@
expression addr;
@@
- random_ether_addr(addr);
+ eth_random_addr(addr);
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Tue, 1 Mar 2016 18:48:31 +0000 (00:18 +0530)]
Staging: rtl8192u: Replace memset with eth_broadcast_addr
Use eth_broadcast_addr to assign the broadcast address to the given
address array instead of memset when the second argument is a broacast
address 0xff. ETH_ALEN is a macro with value 6, so 6 is treated as
ETH_ALEN if it is the third argument of memset.
Done using coccinelle.
@@
expression e;
@@
- memset(e,\(0xff\|0xFF\|255\),\(ETH_ALEN\|6\));
+ eth_broadcast_addr(e);
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Sun, 28 Feb 2016 12:18:36 +0000 (17:48 +0530)]
staging: rtl8192u: ieee80211: Remove unused variables
The pointer *skb2 is declared 'globally' inside ifdef NOT_YET.
It's used nowhere in the directory.
Another pointer *skb2 is declared 'locally', again inside another ifdef NOT_YET
in the function ieee80211_rx_frame_mgmt.
Hence, skb2 stays unused and has been removed.
This was done using Coccinelle:
@@ type T; identifier i; constant c; @@
-T i;
<... when != i
-i = c;
...>
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Wed, 24 Feb 2016 17:16:00 +0000 (22:46 +0530)]
Staging: rtl8192u: Remove debug messages
As kmalloc generates a backtrace on failure so there is no need of
these debug messages when kmalloc fails. Also remove unwanted {} around if
block after removal of these messages.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Wed, 24 Feb 2016 10:17:35 +0000 (15:47 +0530)]
Staging: rtl8192u: Clean up tests if NULL returned on failure
Some functions return Null as their return value on failure. !x is
generally preferred over x==NULL or NULL==x. So make use of !x if
the value returned on failure is NULL.
Done using coccinelle:
@@
expression e;
statement S;
@@
e = \(kmalloc\|devm_kzalloc\|kmalloc_array
\|devm_ioremap\|usb_alloc_urb\|alloc_netdev\)(...);
- if(e==NULL)
+ if(!e)
S
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Tue, 23 Feb 2016 21:27:57 +0000 (02:57 +0530)]
staging: rtl8192u: ieee802111: Drop Useless Initialization
Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@bad@
identifier i;
position p;
@@
i =@p <+...i...+>;
@@
type T;
constant C;
expression e;
identifier i;
position p != bad.p;
@@
T i
- = C
;
i =@p e;
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Sun, 21 Feb 2016 10:13:00 +0000 (15:43 +0530)]
staging: rtl8192u: ieee80211: Use macro DIV_ROUND_UP
The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Hackmann [Fri, 26 Feb 2016 19:00:18 +0000 (19:00 +0000)]
staging: goldfish: audio: fix compiliation on arm
We do actually need slab.h, by luck we get it on other platforms but not
always on ARM. Include it properly.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Hackmann [Fri, 26 Feb 2016 19:00:03 +0000 (19:00 +0000)]
staging: goldfish: audio: add devicetree bindings
Introduce devicetree bindings to the Goldfish staging audio driver.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Thu, 10 Mar 2016 17:13:34 +0000 (22:43 +0530)]
staging: rtl8192e: rtllib_crypt_tkip: Remove unnecessary else after return
This patch fixes the checkpatch warning that else is not generally
useful after a break or return.
This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
s1
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Tue, 1 Mar 2016 19:42:03 +0000 (01:12 +0530)]
Staging: rtl8192e: Replace random_ether_addr with eth_random_addr
The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Remove the wrapper function rtllib_randomize_cell and replace its
call with eth_random_addr as it is wrapping random_ether_addr.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Ravichandran [Thu, 25 Feb 2016 19:56:33 +0000 (14:56 -0500)]
staging: rtl8192e: Drop cast on void pointer
Void pointers need not be cast to other pointer types.
Semantic patch used:
@r@
expression x;
void *e;
type T;
identifier f;
@@
(
*((T *)e)
|
((T *)x) [...]
|
((T *)x)->f
|
- (T *)
e
)
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Thu, 25 Feb 2016 03:53:31 +0000 (09:23 +0530)]
staging: rtl8192e: rtl8192e: Remove create_workqueue()
With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop priv_wq by using system_wq.
Since there are multiple work items per priv but they do not need
to be ordered, increase of concurrency by switching to system_wq
should not break anything.
All work items are sync canceled on so it is guaranteed that
no work is running when rtl92e_suspend function is called.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tapan Prakash T [Wed, 24 Feb 2016 17:36:12 +0000 (23:06 +0530)]
drivers: staging: rtl8192e: rtllib_rx.c: Fix blank lines before a close brace
Fixed checkpatch.pl issue 'Blank lines aren't necessary before a close
brace'
Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tapan Prakash T [Wed, 24 Feb 2016 17:17:47 +0000 (22:47 +0530)]
drivers: staging: rtl8192e: rtllib_rx.c: Fix code indent for conditional statement
Fixed checkpatch.pl warning 'suspect code indent for conditional
statements'
Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Tue, 8 Mar 2016 17:59:37 +0000 (23:29 +0530)]
staging: rtl8192e: Prefer using macro DIV_ROUND_UP
The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Sat, 20 Feb 2016 10:06:26 +0000 (15:36 +0530)]
staging: rtl8192e: Remove create_workqueue()
With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop wq by using system_wq.
Since there are multiple work items per rtllib but they do not need to
be ordered, increase of concurrency by switching to system_wq should
not break anything.
All work items are sync canceled on rtllib_stop_protocol() so it is
guaranteed that no work is running when rtl92e_disable/reset/restart
functions are called.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anchal Jain [Fri, 11 Mar 2016 14:19:50 +0000 (19:49 +0530)]
staging: wilc1000: Possible unnecessary 'out of memory' message
Remove unnnecessary debug message.
Problem detected by checkpatch.
Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 8 Mar 2016 01:04:32 +0000 (10:04 +0900)]
staging: wilc1000: use mutex instead of semaphore sem_cfg_values
This patch replaces struct semaphore sem_cfg_values with struct mutex
cfg_values_lock. It is better to use mutex than semaphore.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sun, 6 Mar 2016 14:56:58 +0000 (20:26 +0530)]
Staging: lustre: Use list_{next/prev}_entry instead of list_entry
This patch replace list_entry with list_{next/prev}_entry as it makes
the code more clear to read.
Done using coccinelle:
@@
expression e1;
identifier e3;
type t;
@@
(
- list_entry(e1->e3.next,t,e3)
+ list_next_entry(e1,e3)
|
- list_entry(e1->e3.prev,t,e3)
+ list_prev_entry(e1,e3)
)
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sun, 6 Mar 2016 14:38:44 +0000 (20:08 +0530)]
Staging: lustre: lnet: Use list_first_entry_or_null
This patch replaces list_empty and list_entry with
list_first_entry_or_null.
Done using coccinelle:
@@
expression e1,e2;
statement S;
@@
- if(!list_empty(...)){
e2=
- list_entry(e1.next,
+ list_first_entry_or_null(&e1,
...);
+ if(e2){
...
}
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Thu, 25 Feb 2016 12:04:43 +0000 (17:34 +0530)]
staging: rtl8723au: hal: Remove useless return variables
This patch removes unnecessary return variables and compresses the
return logic.
The coccinelle script that finds and fixes this issue is:
@@ type T; identifier i,f; constant C; @@
- T i;
...when != i
when strict
( return -C;
|
- i =
+ return
f(...);
- return i;
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Wed, 24 Feb 2016 17:04:31 +0000 (22:34 +0530)]
Staging: rtl8723au: Remove debug messages
As kmalloc generates a backtrace on failure so there is no need of these
debug messages when kmalloc fails. Also remove unwanted {} around if block
after removal of these messages.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Wed, 24 Feb 2016 10:23:57 +0000 (15:53 +0530)]
Staging: rtl8723au: Clean up tests if NULL returned on failure
Some functions like kmalloc/usb_alloc_urb returns Null as their return
value on failure. !x is generally preferred over x==NULL or NULL==x. So
make use of !x if the value returned on failure by these functions is NULL.
Done using coccinelle:
@@
expression e;
statement S;
@@
e = \(kmalloc\|devm_kzalloc\|kmalloc_array
\|devm_ioremap\|usb_alloc_urb\|alloc_netdev\)(...);
- if(e==NULL)
+ if(!e)
S
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Mon, 22 Feb 2016 17:07:00 +0000 (22:37 +0530)]
staging: rtl8723au: Remove unnecessary parantheses
Removed parantheses on the right hand side of assignments as they are
not needed.
This was done with Coccinelle:
@@ expression a, b; @@
a =
- (
b
- )
;
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Tue, 1 Mar 2016 15:35:33 +0000 (23:35 +0800)]
staging: rtl8723au: core: rtw_recv: use list_first_entry()
Use list_first_entry() instead of container_of() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Tue, 1 Mar 2016 15:35:32 +0000 (23:35 +0800)]
staging: rtl8723au: core: rtw_xmit: use list_first_entry_or_null()
Use list_first_entry_or_null() instead of list_empty() + container_of()
to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Tue, 1 Mar 2016 15:35:31 +0000 (23:35 +0800)]
staging: rtl8723au: core: rtw_recv: use list_first_entry_or_null()
Use list_first_entry_or_null() instead of list_empty() + container_of()
to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 11 Mar 2016 03:35:54 +0000 (19:35 -0800)]
Revert "staging: comedi: drivers: Remove unneeded NULL check before kfree()"
This reverts commit
3545bee9b8ec00ba733e17363f494c8761fb5e49.
It's not correct.
Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Cc: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Wed, 9 Mar 2016 19:04:44 +0000 (00:34 +0530)]
staging: comedi: ni_pcidio.c: Prefer using macro DIV_ROUND_UP
The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Wed, 9 Mar 2016 18:54:49 +0000 (00:24 +0530)]
staging: comedi: dt282x: Prefer using macro DIV_ROUND_UP
The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Wed, 9 Mar 2016 18:49:38 +0000 (00:19 +0530)]
staging: comedi: rtd520: Prefer using macro DIV_ROUND_UP
The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Wed, 9 Mar 2016 18:35:16 +0000 (00:05 +0530)]
staging: comedi: drivers: ni_mio_common: Prefer using macro DIV_ROUND_UP
The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Wed, 9 Mar 2016 18:33:49 +0000 (00:03 +0530)]
staging: comedi: drivers: amplc_pci230: Prefer using macro DIV_ROUND_UP
The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandhya Bankar [Sun, 6 Mar 2016 07:05:29 +0000 (12:35 +0530)]
Staging: comedi: Use predefined macro offset_in_page() instead of (addr & ~PAGE_MASK).
Use predefined macro offset_in_page() instead of (addr & ~PAGE_MASK).
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Sun, 6 Mar 2016 00:21:52 +0000 (05:51 +0530)]
staging: comedi: drivers: gsc_hpdi: Remove use of deprecated pci API
Replace pci_[alloc|free]_consistent occurences with
dma_[alloc|free]_coherent.
The Coccinelle semantic patch that was used to make some of these
changes is as follows:
@deprecated@
idexpression id;
position p;
@@
(
pci_dma_supported@p ( id, ...)
|
pci_alloc_consistent@p ( id, ...)
)
@bad1@
idexpression id;
position deprecated.p;
@@
...when != &id->dev
when != pci_get_drvdata ( id )
when != pci_enable_device ( id )
(
pci_dma_supported@p ( id, ...)
|
pci_alloc_consistent@p ( id, ...)
)
@depends on !bad1@
idexpression id;
expression direction;
position deprecated.p;
@@
(
- pci_dma_supported@p ( id,
+ dma_supported ( &id->dev,
...
+ , GFP_KERNEL
)
|
- pci_alloc_consistent@p ( id,
+ dma_alloc_coherent ( &id->dev,
...
+ , GFP_KERNEL
)
)
gsc_hpdi_auto_attach does not affect interrupt status but contains a
call to comedi_alloc_devpriv() which calls kzalloc with GFP_KERNEL flag.
Thus, there seems to be no danger that dma_alloc_coherent can be called
with interrupts turned off, and GFP_KERNEL can be used.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Thu, 10 Mar 2016 17:39:14 +0000 (23:09 +0530)]
staging: unisys: visornic: Remove unnecessary else after return
This patch fixes the checkpatch warning that else is not generally
useful after a break or return.
This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
s
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Wed, 9 Mar 2016 02:28:28 +0000 (21:28 -0500)]
staging: unisys: visorbus: clean up visorchannel_clear
Goto label was ambiguous change to out_free_page to signify that
we will always go through the path even on success.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Wed, 9 Mar 2016 02:28:27 +0000 (21:28 -0500)]
staging: unisys: visorbus: cleanup gotos in visorchannel_create_guts
Away label is ambiguous change to it err_destroy_channel to make it
clear this is an error path.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandhya Bankar [Sun, 6 Mar 2016 10:20:35 +0000 (15:50 +0530)]
Staging: most: Use usb_endpoint_dir_in(endpoint) instead of (endpoint->bEndpointAddress & USB_DIR_IN).
Use usb_endpoint_dir_in(endpoint) instead of (endpoint->bEndpointAddress & USB_DIR_IN) to check if the endpoint has IN direction.
This correction is based on following semantic patch,
@@
struct usb_endpoint_descriptor *endpoint;
expression E;
@@
(
- endpoint->bEndpointAddress & USB_DIR_IN
+ usb_endpoint_dir_in(endpoint)
|
- endpoint->bEndpointAddress == USB_DIR_IN
+ usb_endpoint_dir_in(endpoint)
|
- (endpoint->bEndpointAddress & E) == USB_DIR_IN
+ usb_endpoint_dir_in(endpoint)
)
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sun, 6 Mar 2016 15:36:47 +0000 (21:06 +0530)]
Staging: most: Use list_first_entry instead of list_entry
This patch replaces list_entry with list_first_entry as it makes the
code more clear.
Done using coccinelle:
@@
expression e;
@@
(
- list_entry(e->next,
+ list_first_entry(e,
...)
|
- list_entry(e->prev,
+ list_last_entry(e,
...)
)
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eva Rachel Retuya [Sat, 5 Mar 2016 15:16:17 +0000 (23:16 +0800)]
staging: unisys: visorinput: convert pr_err() to dev_err()
Replace pr_err() calls with respective dev_err() counterpart.
Semantic patch used to detect and apply the transformation:
@r exists@
identifier f,s,i;
position p;
@@
f(...,struct s *i,...) {
<+...
pr_err@p(...)
...+>
}
@s@
identifier r.s, dev;
@@
struct s {
...
struct device dev;
...
};
@t@
identifier r.i, s.dev;
expression fmt;
position r.p;
@@
- pr_err@p(
+ dev_err(&i->dev,
fmt, ...);
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sat, 5 Mar 2016 13:46:40 +0000 (19:16 +0530)]
Staging: most: Replace pr_err with dev_err
All devm functions has a device structure as the first argument which is
required by dev_{err,info,dbg} printing functions.
This patch converts pr_err to dev_err as dev_* is preferred after calls
to devm functions.
Done using coccinelle:
@r1 exists@
expression e,e1;
identifier f =~ "^devm_";
identifier g =~ "^pcim_";
identifier h =~ "^dmam_";
@@
e=\(f\|g\|h\)(e1,...);
<+...
(
- pr_info(
+ dev_info(e1,
...);
|
- pr_err(
+ dev_err(e1,
...);
|
- pr_debug(
+ dev_dbg(e1,
...);
)
...+>
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Mar 2016 18:00:38 +0000 (13:00 -0500)]
staging: unisys: visorbus: variable adjustment should be a u64
This patch fixes the smatch error:
drivers/staging/unisys/visorbus/visorchipset.c:2217 visorchipset_ioctl()
warn: user controlled 'adjustment' cast to postive rl = 's64min-s64max'
This is because we read a s64 and pass it to a function as u64.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandhya Bankar [Sun, 6 Mar 2016 07:13:27 +0000 (12:43 +0530)]
Staging: vt6655: Remove & from function name.
Remove & from function name,when function name passed as an argument to another function.
Function name is used as pointer without &.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Marsh [Tue, 1 Mar 2016 18:45:09 +0000 (19:45 +0100)]
Staging: vt6655: remove unnecessary blank lines from card.c
This a patch to card.c to remove unnecessary blank lines in order to
remove a checkpatch.pl warning.
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rehas Sachdeva [Fri, 26 Feb 2016 12:57:05 +0000 (18:27 +0530)]
staging: vt6656: Remove unnecessary parentheses
This patch removes the following checkpatch.pl warnings:
Unnecessary parentheses around al7230_init_table_amode[0][0]
Unnecessary parentheses around al7230_channel_table2[0][0]
Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:12 +0000 (12:57 +0000)]
staging: vt6655: mac.c replace dwData with data.
Removing camel case and type prefix.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:11 +0000 (12:57 +0000)]
staging: vt6655: mac.c replace wOffset with offset.
Removing camel case and type prefix.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:10 +0000 (12:57 +0000)]
staging: vt6655: mac.c replace byOrgDMACtl with org_dma_ctl
Removing camel case and type prefix.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:09 +0000 (12:57 +0000)]
staging: vt6655: mac Replace dwCurrDescAddr with curr_desc_addr.
Removing camel case and type prefix.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:08 +0000 (12:57 +0000)]
staging: vt6655: mac.c replace VNSvInPortB with ioread8
Removing the macro from functions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:07 +0000 (12:57 +0000)]
staging: vt6655: MACvSetLoopbackMode replace byOrgValue with ioread8
Removing VNSvInPortB and nesting inside iowrite8.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:06 +0000 (12:57 +0000)]
staging: vt6655: MACbPSWakeup replace VNSvInPortB byOrgValue with ioread8
removing byOrgValue variable.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:05 +0000 (12:57 +0000)]
staging: vt6655: mac.c replace VNSvOutPortB with iowrite8
removing macro from functions
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:04 +0000 (12:57 +0000)]
staging: vt6655: mac.c replace VNSvOutPortW with iowrite16
removig macro from functions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:03 +0000 (12:57 +0000)]
staging: vt6655: mac.c replace VNSvOutPortD with iowrite32.
Removing the macro from functions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:02 +0000 (12:57 +0000)]
staging: vt6655: mac.c/h resize all unsigned long to u32
All addressing is limited to 32 bits match this to all
functions and port out functions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:01 +0000 (12:57 +0000)]
staging: vt6655: MACvRestoreContext replace for loops with memcpy_toio.
Removing the need for variable ii.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 6 Mar 2016 12:57:00 +0000 (12:57 +0000)]
staging: vt6655: mac.c rename pbyCxtBuf to cxt_buf
Removing camel case and type prefix.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 28 Feb 2016 19:02:57 +0000 (19:02 +0000)]
staging: vt6655: MACvSaveContext use memcpy_fromio to read context.
Use memcpy_fromio to store data removing the need for local count.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 28 Feb 2016 19:02:56 +0000 (19:02 +0000)]
staging: vt6655: replace VNSvInPortD dwData reads with ioread32
Removing dwData variable altogether.
The reads are always 32 bit insize.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 28 Feb 2016 19:02:55 +0000 (19:02 +0000)]
staging: vt6655: mac.c Replace VNSvInPortB byData reads with ioread8.
Removing byData variable altogether.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 28 Feb 2016 19:02:54 +0000 (19:02 +0000)]
staging: vt6655: mac.c rename dwIoBase to io_base
Removing camel case.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Tue, 8 Mar 2016 22:35:29 +0000 (17:35 -0500)]
staging: lustre: make lustre dependent on LNet
In the case of lustre routers you only need a functioning
LNet stack. Especially since often the routers are very
light weight and want to avoid any addition software that
would create additional pressures on the system.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Tue, 8 Mar 2016 22:35:28 +0000 (17:35 -0500)]
staging: lustre: add help section of Kconfig config LNET
Include a help section for Kconfig LNET.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Tue, 8 Mar 2016 22:35:27 +0000 (17:35 -0500)]
staging: lustre: fixup kernel Kconfig option LNET_MAX_PAYLOAD
A few errors exist for the Kconfig option LNET_MAX_PAYLOAD. First
mistake is the default size is 1MB not 2MB as it is shown to the
person configuring the kernel. Second the LNET_MAX_PAYLOAD option
is more closely related to LNET than the LUSTRE_FS option.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Tue, 8 Mar 2016 22:35:26 +0000 (17:35 -0500)]
staging: lustre: move libcfs to lnet layer
The lustre file system has a layered architecture with
libcfs as the lowest layer and LNet layered on top. Then
on top of LNet we run the lustre client. This patch moves
the libcfs module code out of lustre into the lnet tree.
This fits into the long term goal of eventually merging
libcfs into LNet.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Mon, 7 Mar 2016 23:10:24 +0000 (18:10 -0500)]
staging: lustre: make LNet use lprocfs_call_handler
Sometime ago a patch was submitted to duplicate the
proc_call_handler code in the LNet layer. This was
due to the thinking libcfs was not used by the LNet
layer. This was a wrong assumption so lets make LNet
use the lprocfs_call_handler from the libcfs layer.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Mon, 7 Mar 2016 23:10:23 +0000 (18:10 -0500)]
staging: lustre: rename proc_call_handler to lprocfs_call_handler
Using proc_call_handler as a function name is way too generic.
Rename to lprocfs_call_handler to avoid possible collisions.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Mon, 7 Mar 2016 23:10:22 +0000 (18:10 -0500)]
staging: lustre: change test to assert in LNetGetId
The ln_refcount test was changed into an assert.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Nunez [Mon, 7 Mar 2016 23:10:21 +0000 (18:10 -0500)]
staging: lustre: Correct missing newline
Several error messages are missing newline characters
at the end of the message. Newlines are added where
necessary and other minor corrections; no punctuation
at the end of an error message, add a return code to
the end of error messages, device name at the beginning,
etc.
There are just a couple of places where newlines are
removed and this is only in LDLM_DEBUG_NOLOCK. The definition
of LDLM_DEBUG_NOLOCK already has a newline in it and
resulted in double newlines printed.
Signed-off-by: James Nunez <james.a.nunez@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4871
Reviewed-on: http://review.whamcloud.com/10000
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Cliff White <cliff.white@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastien Buisson [Mon, 7 Mar 2016 23:10:20 +0000 (18:10 -0500)]
staging: lustre: fix 'data race condition' issue in framework.c
Fix 'data race condition' defects found by Coverity version 6.5.0:
Data race condition (MISSING_LOCK)
Accessing variable without holding lock. Elsewhere,
this variable is accessed with lock held.
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2744
Reviewed-on: http://review.whamcloud.com/6568
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastien Buisson [Mon, 7 Mar 2016 23:10:19 +0000 (18:10 -0500)]
staging: lustre: fix 'NULL pointer dereference' errors
Fix 'NULL pointer dereference' defects found by Coverity version
6.5.3:
Dereference after null check (FORWARD_NULL)
For instance, Passing null pointer to a function which dereferences
it.
Dereference before null check (REVERSE_INULL)
Null-checking variable suggests that it may be null, but it has
already been dereferenced on all paths leading to the check.
Dereference null return value (NULL_RETURNS)
The following fixes for the LNet layer are broken out of patch
http://review.whamcloud.com/4720.
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2217
Reviewed-on: http://review.whamcloud.com/4720
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastien Buisson [Mon, 7 Mar 2016 23:10:18 +0000 (18:10 -0500)]
staging: lustre: fix 'data race condition' issue in conrpc.c
Fix 'data race condition' defects found by Coverity version 6.5.0:
Data race condition (MISSING_LOCK)
Accessing variable without holding lock. Elsewhere,
this variable is accessed with lock held.
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2744
Reviewed-on: http://review.whamcloud.com/6567
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Mon, 7 Mar 2016 23:10:17 +0000 (18:10 -0500)]
staging: lustre: LNet network latency simulation
Incoming lnet message can be delayed for seconds if it can match
any of LNet Delay Rules.
User can add/remove/list Delay Rule by lctl commands:
- lctl net_delay_add
Add a new Delay Rule to LNet, options
<-s | --source SRC_NID>
<-d | --dest DST_NID>
<<-r | --rate RATE_NUMBER>
<-i | --interlval SECONDS>>
<-l | --latency DELAY_LATENCY>
- lctl net_delay_del
Remove matched Delay Rule from LNet, options:
<[-a | --all] |
<-s | --source SRC_NID>
<-d | --dest DST_NID>>
- lctl net_delay_list
List all Delay Rules in LNet
- lctl net_delay_reset
Reset statistic counters for all Delay Rules
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5435
Reviewed-on: http://review.whamcloud.com/11409
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Mon, 7 Mar 2016 23:10:16 +0000 (18:10 -0500)]
staging: lustre: LNet drop rule implementation
This is implementation of LNet Drop Rule, which can randomly drop
LNet messages at specified rate.
LNet Drop Rule can only be applied to receive side of message. User
can add drop_rule either on end point of cluster (client/server) or
on LNet routers.
Here are lctl command to control LNet Drop Rules:
- net_drop_add -s SRC_NID -d DEST_NID --rate VALUE
drop 1/@VALUE of messages from @SRC_NID to @DEST_NID
- net_drop_del -s SRC_NID -d DEST_NID
remove all drop rules from @SRC_NID to @DEST_NID
- net_drop_list
list all drop rules on current node
Examples:
- lctl net_drop_add -s *@o2ib0 -d 192.168.1.102@tcp 1000
add new drop rule, it will drop 1/1000 messages from network o2ib0
to 192.168.1.102@tcp
- lctl net_drop_add -s 10.8.6.123@o2ib1 -d * 500
add new drop rule, it will drop 1/500 messages from 10.8.6.123@o2ib1
to all nodes
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5435
Reviewed-on: http://review.whamcloud.com/11314
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 2 Mar 2016 19:06:46 +0000 (20:06 +0100)]
isdn: i4l: move active-isdn drivers to staging
The icn, act2000 and pcbit drivers are all for very old hardware,
and it is highly unlikely that anyone is actually still using them
on modern kernels, if at all.
All three drivers apparently are for hardware that predates PCI
being the common connector, as they are ISA-only and active
PCI ISDN cards were widely available in the 1990s.
Looking through the git logs, it I cannot find any indication of a
patch to any of these drivers that has been tested on real hardware,
only cleanups or global API changes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 2 Mar 2016 19:06:45 +0000 (20:06 +0100)]
isdn: icn: remove a #warning
The icn driver currently produces an unconditional #warning whenever
we build it, introduced by Karsten Keil back in 2003:
#warning TODO test headroom or use skb->nb to flag ACK
Karsten's original commit (from BitKeeper) contains this description:
- here are lot of bugs left, so ISDN is not stable yet but
I think it's really time to fix it, even if it need some cycles
to get it right (normally I'm only send patches if it works 100% for
me).
- I add some additional #warnings to address places which need fixing
(I hope that some of the other ISDN developer jump in)
Apparently this has not happened, and it is unlikely that it ever will,
given that the driver doesn't seem to work. No substantial bug fixes
other than janitorial cleanups have happened in the driver since then,
and I see no indication that anyone who patched it had the hardware.
We should probably either remove the driver, or remove all of i4l,
but for now, this shuts up the distracting #warning by turning it
into a comment.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: http://git.meleeweb.net/linux.git/commit/?id=b0deac0886b0056765afd149e9834373b38e096b
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 2 Mar 2016 14:27:38 +0000 (14:27 +0000)]
staging: comedi: comedi.h: Fix comment for struct comedi_krange
The kernel-doc comment for `struct comedi_krange` refers to the macro
constant `RF_external`. It should be `RF_EXTERNAL`, so fix it. It also
documents the value of the constant as `(1 << 8)`, but the macro now
expands to the hexadecimal constant `0x100`, so use that as the
documented value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 2 Mar 2016 14:27:37 +0000 (14:27 +0000)]
staging: comedi: comedi.h: Do not use BIT macro
The "comedi.h" file is part of the user API for COMEDI devices, and is
intended to be migrated to "include/uapi/linux". The `BIT` macro from
"include/linux/bitops.h" should not be used there.
Replace the use of the `BIT` macro with hexadecimal constants of the
same value. The `BIT` macro replaced expressions of the form `(1 << N)`
in this file originally, but reverting back to that form would encourage
patches changing them back to use the `BIT` macro.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rasmus Linusson [Sun, 28 Feb 2016 15:38:12 +0000 (16:38 +0100)]
staging: comedi: cb_pcimdda: Fix long lines in comments
Reorder comments to keep 80 character limit
Signed-off-by: Rasmus Linusson <rasmus@linusson.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rasmus Linusson [Sun, 28 Feb 2016 15:38:11 +0000 (16:38 +0100)]
staging: comedi: cb_pcimdda: Fix multi-line comments
Add asterisks to multi-line comments currently missing them
Signed-off-by: Rasmus Linusson <rasmus@linusson.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sun, 28 Feb 2016 07:58:47 +0000 (13:28 +0530)]
Staging: comedi: s626.c: Remove unused functions
The functions s626_get_clk_mult, s626_get_clk_mult, s626_get_enc_mode,
s626_set_index_pol are not used anywhere in the kernel so they can be
removed. This also cleans the code. Grepped to find the occurences.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Wed, 24 Feb 2016 11:15:34 +0000 (16:45 +0530)]
staging: comedi: drivers: Remove use of deprecated pci API
Replace pci_[alloc|free]_consistent occurences with
dma_[alloc|free]_coherent.
The Coccinelle semantic patch that was used to make some of these
changes is as follows:
@deprecated@
idexpression id;
position p;
@@
(
pci_dma_supported@p ( id, ...)
|
pci_alloc_consistent@p ( id, ...)
)
@bad1@
idexpression id;
position deprecated.p;
@@
...when != &id->dev
when != pci_get_drvdata ( id )
when != pci_enable_device ( id )
(
pci_dma_supported@p ( id, ...)
|
pci_alloc_consistent@p ( id, ...)
)
@depends on !bad1@
idexpression id;
expression direction;
position deprecated.p;
@@
(
- pci_dma_supported@p ( id,
+ dma_supported ( &id->dev,
...
+ , GFP_KERNEL
)
|
- pci_alloc_consistent@p ( id,
+ dma_alloc_coherent ( &id->dev,
...
+ , GFP_KERNEL
)
)
alloc_and_init_dma_members does not affect the interrupt status and is
only called by auto_attach, which also does not affect the interrupt
status. auto_attach() also contains a call to comedi_alloc_devpriv()
which calls kzalloc with GFP_KERNEL flag. Thus, there seems to be no
danger that dma_alloc_coherent can be called with interrupts turned
off, and GFP_KERNEL can be used.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Ravichandran [Wed, 24 Feb 2016 00:36:04 +0000 (19:36 -0500)]
staging: comedi: drivers: Remove unneeded NULL check before kfree()
Remove NULL check before kfree as it is not needed.
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philippe Loctaux [Mon, 22 Feb 2016 23:47:59 +0000 (00:47 +0100)]
Staging: comedi: contec_pci_dio: fixed comment blocks coding style issues
Makes the comment blocks start with /* on separate lines, and end
with */ on separate lines as well,
starting with * for each comment lines.
Signed-off-by: Philippe Loctaux <phil@philippeloctaux.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Sun, 21 Feb 2016 10:43:01 +0000 (16:13 +0530)]
staging: comedi: Use macro DIV_ROUND_CLOSEST
Occurences of the computation (x +d/2)/d can be replaced with
the macro DIV_ROUND_CLOSEST.
This was detected by the following Coccinelle script.
@@
expression e1,e2;
@@
(
- ((e1) + e2/2) / (e2)
+ DIV_ROUND_CLOSEST(e1,e2)
|
- ((e1) + (e2/2)) / (e2)
+ DIV_ROUND_CLOSEST(e1,e2)
)
Since some lines exceeded the 80 character limit,
some changes were made by hand.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan [Mon, 15 Feb 2016 18:59:06 +0000 (18:59 +0000)]
comedi: note a coverity discovered hole that needs fixing
It's not trivial to just post up a fix, so add it to the TODO list and
ensure it doesn't get lost.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Tue, 1 Mar 2016 19:43:22 +0000 (01:13 +0530)]
Staging: gdm724x: Replace random_ether_addr with eth_random_addr
The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Done using coccinelle:
@@
expression addr;
@@
- random_ether_addr(addr);
+ eth_random_addr(addr);
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.04711 seconds and 5 git commands to generate.