Jim Kingdon [Wed, 6 Oct 1993 17:48:18 +0000 (17:48 +0000)]
* README: Add Alpha notes from Schauer.
Ian Lance Taylor [Wed, 6 Oct 1993 17:31:31 +0000 (17:31 +0000)]
Changes to let cons handle bignums like general expressions.
* expr.h (expressionS): New field X_unsigned.
* expr.c (operand): Initialize X_unsigned to 1. Set it to 0 for
unary minus case.
(expr) Fix typo resultP to right if missing operand. Set
X_unsigned to 1 when building new expression.
* read.c (potable): Make "octa" and "quad" call cons, not
big_cons.
(cons): Handle bignums. If given an O_constant (small integer) to
fill a big space, turn it into a bignum.
(parse_bitfield_cons): Set X_unsigned field.
(bignum_low, bignum_limit, bignum_high, grow_bignum, big_cons):
Removed.
* read.h (big_cons): Remove prototype.
* symbols.c (resolve_symbol_value): Don't give a warning if a
symbol in expr_section can not be resolved.
(S_SET_VALUE): Clear X_unsigned.
* write.c (write_object_file): If resolve_symbol_value failed on a
symbol we are writing out, give a warning.
* config/tc-h8500.c (parse_reglist): Set X_unsigned.
* config/tc-hppa.c (md_pseudo_table): Change "octa" and "quad" to
call pa_cons, not pa_big_cons.
(pa_big_cons): Remove.
* config/tc-hppa.h (pa_big_cons): Remove declaration.
* config/tc-i960.c (md_pseudo_table): Change "quad" to call cons,
not big_cons.
Ian Lance Taylor [Tue, 5 Oct 1993 21:49:04 +0000 (21:49 +0000)]
* mips-opc.c: Correct lwu opcode value (book had it wrong).
Jim Kingdon [Tue, 5 Oct 1993 21:25:10 +0000 (21:25 +0000)]
* Makefile.in (install, uninstall): Remove $$n.1 stuff; I don't
understand what it is trying to do, but I suspect it's not doing
it.
* config/ns32k/merlin.mh: Add comment about M_INSTALL.
* config/m88k/{delta88.mh,delta88v4.mh}: Remove M_INSTALL and
M_UNINSTALL; it tries to install a non-existent file gdb.z.
* Makefile.in: Remove M_INSTALL stuff; the above were the only uses.
Jim Kingdon [Tue, 5 Oct 1993 20:39:49 +0000 (20:39 +0000)]
* stabsread.c (read_range_type): Remove comment which recommends
distinguishing float from complex by the name.
Jim Kingdon [Tue, 5 Oct 1993 20:32:37 +0000 (20:32 +0000)]
* readline.c: Add stuff for HIUX to place where we detect termio
vs. sgtty (ugh, but I don't see a simple better way).
Peter Schauer [Tue, 5 Oct 1993 19:44:57 +0000 (19:44 +0000)]
Changes to support alpha OSF/1 in native mode.
* alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
New files.
* Makefile.in: Add new files and dependencies.
* configure.in: Add alpha target.
* config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
* config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
shared libraries now.
* config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
* defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
provide `unsigned int' default.
* breakpoint.c (breakpoint_auto_delete): Delete only if we really
stopped for the breakpoint.
* stabsread.c, stabsread.h (define_symbol): Change valu parameter
to a CORE_ADDR.
* stabsread.c (read_range_type): Handle the case where the lower
bound overflows and the upper doesn't and the range is legal.
* infrun.c (resume): Do not step a breakpoint instruction if
CANNOT_STEP_BREAKPOINT is defined.
* inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
Now that we have the bp_call_dummy breakpoint the call dummy code
is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
FIX_CALL_DUMMY can be used to set up everything for the dummy.
The breakpoint for the dummy is set at the entry point and thats it.
* blockframe.c (inside_entry_file, inside_entry_func): Do not stop
backtraces if pc is in the call dummy at the entry point.
* infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
the expected breakpoint pc when setting up the frame for
set_momentary_breakpoint.
* symfile.c (entry_point_address): New function for AT_ENTRY_POINT
support.
* valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
Peter Schauer [Tue, 5 Oct 1993 19:32:46 +0000 (19:32 +0000)]
* gdb.stabs/alpha.mt: New configuration file for alpha.
* gdb.stabs/configure.in: Use it.
* gdb.stabs/ecoff.mt, weird-ecoff.sed: Change sed script to enable
sharing with alpha.mt, redefine long to word via preprocessor.
* gdb.stabs/weird.def: Conditionally adapt storage layout of v_comb
for alpha.
* gdb.stabs/weird.exp: Handle compilation of weird.s by alpha
native cc.
* gdb.t00/teststrategy.exp: Change expect string so that we
consume the `(xgdb)' from the command echo and from the gdb prompt.
* gdb.t05/expr.exp: xfail "print unsigned int == (~0)" on the alpha.
gdb currently compares all values as long, so this failure probably
applies to any configuration where LONGEST is bigger than a target int.
* gdb.t08/comp-info.c: New file to determine if gdbme is compiled
with gcc.
* gdb.t08/Makefile.in, opaque.exp: Use it. Alpha native cc is unable
to handle opaque pointers, gcc is.
* gdb.t21/gdbme.cc, gdb.t23/gdbme.cc: operator new takes a size_t
as first argument. Include <sys/types.h> and change all operator
new definitions to use size_t.
* gdb.t21/cplusfuncs.exp: Handle changes in output for operator new
now that we use size_t.
David D. Zuhn [Tue, 5 Oct 1993 19:29:09 +0000 (19:29 +0000)]
keep mt-hppa
Peter Schauer [Tue, 5 Oct 1993 19:25:43 +0000 (19:25 +0000)]
* alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
New files.
* Makefile.in: Add new files and dependencies.
* configure.in: Add alpha target.
* config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
* config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
shared libraries now.
* config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
Peter Schauer [Tue, 5 Oct 1993 19:21:35 +0000 (19:21 +0000)]
* mh-alphaosf: Remove, no longer necessary now that gdb knows
how to handle OSF/1 shared libraries.
Jim Kingdon [Tue, 5 Oct 1993 17:51:13 +0000 (17:51 +0000)]
* configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
Change other hppa host entries to use -*- not -hp-.
Jim Kingdon [Tue, 5 Oct 1993 17:46:28 +0000 (17:46 +0000)]
* configure.host: Recognize hppa*-*-hiux* (currently synonym for hpux).
Change other hppa entries to use -*- not -hp-.
* config.bfd: Recognize hppa*-*-hiux* (currently synonym for hpux).
Jim Kingdon [Tue, 5 Oct 1993 17:41:05 +0000 (17:41 +0000)]
* configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
* config.guess: Recognize Hitachi's HIUX.
* config.sub: Recognize h3050r* and hppahitachi.
Remove redundant cases for hp9k[23]*.
Jim Kingdon [Tue, 5 Oct 1993 16:26:54 +0000 (16:26 +0000)]
* rs6000.h: Change non-ASCII characters in comment to octal
escapes.
Jim Kingdon [Tue, 5 Oct 1993 16:01:49 +0000 (16:01 +0000)]
* coff-rs6000.c, cpu-rs6000.c, rs6000-core.c: Change non-ASCII
characters in comment to octal escapes.
Stan Shebs [Tue, 5 Oct 1993 02:30:37 +0000 (02:30 +0000)]
Another forgotten file.
Ian Lance Taylor [Mon, 4 Oct 1993 23:29:36 +0000 (23:29 +0000)]
Novell came through with the publicly visible information, so this
file may now be distributed.
* i386-nlmstub.c: New file; debugging stub for i386 NetWare. Must
be compiled with NetWare header files and turned into an NLM with
nlmconv.
David D. Zuhn [Mon, 4 Oct 1993 23:19:25 +0000 (23:19 +0000)]
* configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
if gas and ld are in the source tree and are in ${configdirs}.
If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
the --with options (but still pass them down on the command line,
if they were explicitly specified).
* configure: substitute SHELL value in Makefile.in with
${CONFIG_SHELL}
Jim Kingdon [Mon, 4 Oct 1993 22:01:38 +0000 (22:01 +0000)]
* minsyms.c (lookup_minimal_symbol_by_pc): Don't use mst_abs symbols.
Ian Lance Taylor [Mon, 4 Oct 1993 21:13:48 +0000 (21:13 +0000)]
* read.c (big_cons): Handle "0" correctly.
* config/tc-mips.c (md_begin): Set target_big_endian correctly.
Ken Raeburn [Mon, 4 Oct 1993 20:17:30 +0000 (20:17 +0000)]
configure.in: Alphabetize list of cpu type alternatives. Enable OS values of
"linux*elf*" and "linux*coff*" to select those formats, with linux emulation.
Don't bother checking for upper- or mixed-case versions of "ose".
Ken Raeburn [Mon, 4 Oct 1993 20:10:50 +0000 (20:10 +0000)]
tc-m68k.c change
Jim Kingdon [Mon, 4 Oct 1993 19:19:16 +0000 (19:19 +0000)]
* dbxread.c (process_one_symbol): Make n_opt_found static.
Jim Kingdon [Mon, 4 Oct 1993 18:19:43 +0000 (18:19 +0000)]
* libgdb.texinfo: new file. Spec for the gdb library.
Thomas Lord [Mon, 4 Oct 1993 17:44:52 +0000 (17:44 +0000)]
Addition of the libgdb spec.
Jim Kingdon [Mon, 4 Oct 1993 17:38:17 +0000 (17:38 +0000)]
* Rename i386lynx-tdep.c to i386ly-tdep.c for 14 character file names.
* Makefile.in, config/i386/i386lynx.mt: Change accordingly.
Jim Kingdon [Mon, 4 Oct 1993 17:28:19 +0000 (17:28 +0000)]
Rename i386lynx-tdep.c to i386ly-tdep.c for 14 character file names
Jim Kingdon [Mon, 4 Oct 1993 16:45:11 +0000 (16:45 +0000)]
change all to most in comment
Jim Kingdon [Mon, 4 Oct 1993 16:43:41 +0000 (16:43 +0000)]
Mon Oct 4 11:02:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* values.c (record_latest_value): Fetch lazy values and set VALUE_LVAL
to not_lval.
Sun Oct 3 15:54:51 1993 Stan Shebs (shebs@rtl.cygnus.com)
* objfiles.h (objfile): New slot sym_stab_info, use by most
stab-reading formats.
Stan Shebs [Sun, 3 Oct 1993 23:04:25 +0000 (23:04 +0000)]
Added new slot to objfile struct to be shared by all stab-reading formats.
Stan Shebs [Sun, 3 Oct 1993 22:51:51 +0000 (22:51 +0000)]
Reflect changes in Lynx files.
Stan Shebs [Sun, 3 Oct 1993 22:15:52 +0000 (22:15 +0000)]
More additions and changes for Lynx.
Jim Kingdon [Sun, 3 Oct 1993 20:30:52 +0000 (20:30 +0000)]
* stabs.texinfo (Include Files): Fix typo (start -> end).
Jim Kingdon [Sun, 3 Oct 1993 05:46:21 +0000 (05:46 +0000)]
* config/news-mips.mh, hosts/news-mips.h: New files.
Jim Kingdon [Sun, 3 Oct 1993 03:28:56 +0000 (03:28 +0000)]
* hppa.h: Add gfw and gfr to the opcode table.
Jim Kingdon [Sun, 3 Oct 1993 01:53:35 +0000 (01:53 +0000)]
* Makefile.in, coff-solib.c, coff-solib.h, i386lynx.mt,
tm-i386lynx.h: Add support for SVR3 COFF shared libraries.
Jim Kingdon [Sun, 3 Oct 1993 01:50:53 +0000 (01:50 +0000)]
* mipsread.c, objfiles.c, utils.c: Use PTR not void *. RISC/OS
4.02 lacks void *.
* elfread.c: Use void * not PTR inside PARAMS.
Jim Kingdon [Sun, 3 Oct 1993 00:39:42 +0000 (00:39 +0000)]
* config/mips/news-mips.mh: Remove coredep.o; mips-nat.o does it.
* config/mips/news-mips.mh: Define NAT_FILE not NM_FILE.
* config/mips/nm-news-mips.h: Include mips/nm-mips.h not nm-mips.h.
Jim Kingdon [Sun, 3 Oct 1993 00:35:12 +0000 (00:35 +0000)]
* config/news-mips.mh, hosts/news-mips.h: New files.
* configure.host: Use news-mips for mips-sony-bsd*.
Jim Kingdon [Sat, 2 Oct 1993 23:55:34 +0000 (23:55 +0000)]
new for mips corefiles
Stu Grossman [Sat, 2 Oct 1993 23:09:51 +0000 (23:09 +0000)]
* Makefile.in, coff-solib.c, coff-solib.h, i386lynx.mt,
tm-i386lynx.h: Add support for SVR3 COFF shared libraries.
Jim Kingdon [Sat, 2 Oct 1993 21:07:50 +0000 (21:07 +0000)]
* m88k-nat.c (store_inferior_registers): When writing all registers,
don't try to write EXIP_REGNUM or ENIP_REGNUM (not needed for this
case, and they cause trouble).
Jim Kingdon [Sat, 2 Oct 1993 20:55:34 +0000 (20:55 +0000)]
* TODO: Don't suggest doing fast watchpoints by stepping a line
at a time. That would be really hairy and still not fast enough.
Do suggest debug registers and page table diddling.
Stan Shebs [Fri, 1 Oct 1993 21:42:59 +0000 (21:42 +0000)]
* configure.in: i386lynx_coff_vec requires coff-i386lynx.o.
* coff-i386lynx.c: New file, defines Lynx target vector and name,
includes coff-i386.c.
* coff-i386.c (i386coff_vec): Allow redefinition of target vector
symbol and name, if TARGET_SYM and/or TARGET_NAME are defined.
* i386lynx.c: Remove coff vector definition entirely.
(lynx_32_swap_ext_reloc_in): Define.
(lynx_32_swap_std_reloc_in): Define, get reloc bits in i386
Lynx-specific way.
(lynx_32_swap_ext_reloc_out): Define.
(lynx_32_swap_std_reloc_out): Define.
(lynx_32_slurp_reloc_table): Define, call Lynx swapping fns.
(lynx_32_squirt_out_relocs): Define, call Lynx swapping fns.
(lynx_32_canonicalize_reloc): Define, call Lynx swapping fns.
(WRITE_HEADERS): Define, call Lynx swapping fns.
* config/i386-lynx.mt (SELECT_VECS): Remove redundant vector.
Roland Pesch [Fri, 1 Oct 1993 21:08:13 +0000 (21:08 +0000)]
Makefile.in: correct out-of-date TEXIDIR default
ld.texinfo: (a) fix INPUT cmd description (b) fix bad formatting in FSF
style (warning examples) (c) add some index entries on warnings
Jim Kingdon [Fri, 1 Oct 1993 20:48:14 +0000 (20:48 +0000)]
* printcmd.c (do_examine): Make meaning of 'h', 'w', and 'g' not
depend on builtin_type_*. Instead, it is always 2, 4, and 8 bytes
like the documentation says.
* printcmd.c (decode_format) [CC_HAS_LONG_LONG]: Remove 'l' as
synonym for 'g'. This was never documented, it shouldn't depend on
CC_HAS_LONG_LONG, and I don't see what's wrong with 'g'.
Kung Hsu [Fri, 1 Oct 1993 19:14:04 +0000 (19:14 +0000)]
Modified Files:
ChangeLog
* Fix cvs conflict parts.
Kung Hsu [Fri, 1 Oct 1993 17:16:04 +0000 (17:16 +0000)]
Modified Files:
symtab.c ChangeLog
* symtab.c: fix a bug in testsuite (virtfunc.exp)
* ChangeLog: check in changelog
Roland Pesch [Fri, 1 Oct 1993 02:13:16 +0000 (02:13 +0000)]
Delete obsolete text (which was @ignore'd since July).
Roland Pesch [Fri, 1 Oct 1993 01:30:04 +0000 (01:30 +0000)]
Assorted small improvements, mostly from FSF editing pass (Melissa).
Rob Savoye [Fri, 1 Oct 1993 01:28:55 +0000 (01:28 +0000)]
* ldlang.c (lang_add_input_file): If it's a library brought in by
INPUT(), then change the file type to lang_input_file_is_l_enum.
* ldgram.y: In input_list, change lang_input_file_is_file_enum to
lang_input_file_is_search_file_enum so objects brought in using
INPUT() do a path lookup.
Jim Kingdon [Fri, 1 Oct 1993 00:51:41 +0000 (00:51 +0000)]
* m88k-nat.c (fill_gregset): Fix typo (R_SFIP -> R_FIP).
Roland Pesch [Fri, 1 Oct 1993 00:11:58 +0000 (00:11 +0000)]
Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex
binutils.texi (ar): improve synopsis lines
(strings): fix overfull box in synopsis
(passim) remove some contractions
Jim Kingdon [Thu, 30 Sep 1993 22:14:03 +0000 (22:14 +0000)]
* c-typeprint.c (c_type_print_base, TYPE_FN_FIELD_STUB code):
If demangled name lacks a colon, don't dump core.
Ken Raeburn [Thu, 30 Sep 1993 21:54:49 +0000 (21:54 +0000)]
reloc.c (bfd_reloc_code_type): Add linkage-table relative reloc of size 8, 16,
32. Sort generic relocs by type, not size. Added a little documentation too.
Jim Kingdon [Thu, 30 Sep 1993 21:53:12 +0000 (21:53 +0000)]
* blockframe.c (find_pc_partial_function): If pst->readin is
set, don't try to get symbols from pst.
Jim Kingdon [Thu, 30 Sep 1993 21:42:23 +0000 (21:42 +0000)]
* inflow.c (generic_mourn_inferior): Call reinit_frame_cache
instead of doing it ourself.
* blockframe.c (reinit_frame_cache): Use code which was in
generic_mourn_inferior so we can use this function even when
we have switched targets.
* corelow.c (core_detach): Call reinit_frame_cache.
* target.c (target_detach): Don't call generic_mourn_inferior
(revert yesterday's change, now handled by core_detach).
* objfiles.c (free_objfile): Detach any core file if we call
SOLIB_CLEAR. #include target.h.
Jim Kingdon [Thu, 30 Sep 1993 21:27:16 +0000 (21:27 +0000)]
* corelow.c (core_detach): Call reinit_frame_cache.
* target.c (target_detach): Don't call generic_mourn_inferior
(revert yesterday's change, now handled by core_detach).
* objfiles.c (free_objfile): Detach any core file if we call
SOLIB_CLEAR. #include target.h.
Jim Kingdon [Thu, 30 Sep 1993 20:41:17 +0000 (20:41 +0000)]
* fork-child.c (fork_inferior): Don't call target_terminal_init
and target_terminal_inferior until we are sure that the inferior
has called gdb_setpgid. This fixes PR 2900 (Schauer tracked it
down and was able to reliably reproduce it by putting a sleep()
before the gdb_setpgid()).
Peter Schauer [Thu, 30 Sep 1993 19:06:33 +0000 (19:06 +0000)]
* c-exp.y, m2-exp.y: Change type of address for msymbol to
builtin_type_long.
* infptrace.c (fetch_register, store_inferior_register,
child_xfer_memory): Use PTRACE_XFER_TYPE for the type of ptrace
transfers. Provide an `int' default for PTRACE_XFER_TYPE.
Jim Kingdon [Thu, 30 Sep 1993 17:44:53 +0000 (17:44 +0000)]
* defs.h (TARGET_*_BIT): Don't use host information (sizeof) in
picking defaults.
Jim Kingdon [Thu, 30 Sep 1993 17:15:27 +0000 (17:15 +0000)]
* findvar.c, value.h (write_register): Change val to LONGEST.
Jim Kingdon [Thu, 30 Sep 1993 17:01:45 +0000 (17:01 +0000)]
* gdb.texinfo: Remove stuff about ar and 14 character filenames.
I believe this was fixed by the 13 Sep 89 change to print_frame_info.
Also, modern versions of ar like BSD 4.4 or SVR4 don't have this bug.
Jim Kingdon [Thu, 30 Sep 1993 16:43:35 +0000 (16:43 +0000)]
* cp-valprint.c (cp_is_vtbl_ptr_type): Continue to accept old form.
Stu Grossman [Thu, 30 Sep 1993 01:35:50 +0000 (01:35 +0000)]
* Makefile.in: Add deps for i386lynx-nat.o and i386lynx-tdep.o to
keep non-gnu makes happy.
K. Richard Pixley [Wed, 29 Sep 1993 23:26:42 +0000 (23:26 +0000)]
* m88k-dis.c (m88kdis): comment change. Remove space after
printing mnemonic.
(printop): handle new arg types DEC and XREG for m88110.
K. Richard Pixley [Wed, 29 Sep 1993 23:18:06 +0000 (23:18 +0000)]
correct a few mistakes found while extending the dissassembler.
Kung Hsu [Wed, 29 Sep 1993 20:18:00 +0000 (20:18 +0000)]
Modified Files:
cp-valprint.c
Log Messages:
* cp-valprint.c: change vtble field name to __vtbl (pr2695)
Kung Hsu [Wed, 29 Sep 1993 18:44:47 +0000 (18:44 +0000)]
Modified Files:
symtab.c
* symtab.c: fix a bug in gdb_mangle_name, to get mangled name right
Jim Kingdon [Wed, 29 Sep 1993 18:27:19 +0000 (18:27 +0000)]
check in ChangeLog entry for kung change
Kung Hsu [Wed, 29 Sep 1993 17:02:10 +0000 (17:02 +0000)]
Modified Files:
c-valprint.c
Log messages:
* c-valprint.c: to fix virtual table print bug (pr2695)
Jim Kingdon [Wed, 29 Sep 1993 16:09:01 +0000 (16:09 +0000)]
* readline.c (parser_if): Free tname when done with it (change
imported from from bash 1.12 readline).
Jim Kingdon [Wed, 29 Sep 1993 15:59:36 +0000 (15:59 +0000)]
* target.c (target_detach): Call generic_mourn_inferior.
* inflow.c (generic_mourn_inferior): Call flush_cached_frames.
Jim Kingdon [Wed, 29 Sep 1993 04:25:15 +0000 (04:25 +0000)]
* dbxread.c, coffread.c, elfread.c: A few changes to comments.
Jim Kingdon [Wed, 29 Sep 1993 04:15:43 +0000 (04:15 +0000)]
* dbxread.c, coffread.c: A few changes to comments.
Stan Shebs [Wed, 29 Sep 1993 01:53:52 +0000 (01:53 +0000)]
Additions to support stabs-in-coff.
Jim Kingdon [Wed, 29 Sep 1993 00:25:04 +0000 (00:25 +0000)]
Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
* hppa-dis.c (print_insn_hppa): Handle 'z' operand
type for absolute branch addresses. Delete special
"ble" and "be" code in 'W' operand code.
Jim Kingdon [Wed, 29 Sep 1993 00:24:04 +0000 (00:24 +0000)]
Tue Sep 28 19:19:08 1993 Jeffrey A Law (law@snake.cs.utah.edu)
* hppa.h (be, ble): Use operand type 'z' to denote absolute branch
addresses.
Jim Kingdon [Wed, 29 Sep 1993 00:10:26 +0000 (00:10 +0000)]
* gdb.t24 (demangle.exp): Constructors of templates have names like
vector<int>::vector(int) not vector<int>::vector<int>(int). See
section 14.6 of the ARM.
* gdb.t24 (demangle.exp): Remove a whole bunch of tests of the form
"_vt$MoveCmd"; these differ only in name from "_vt$foo", so they
accomplish little and slow down the testsuite.
* gdb.t24 (demangle.exp): Accept "XXX const" as well as "const XXX".
Accept spaces various places.
Jim Kingdon [Tue, 28 Sep 1993 23:30:02 +0000 (23:30 +0000)]
* infcmd.c (run_stack_dummy): Set the frame in the bp_call_dummy
breakpoint.
Jim Kingdon [Tue, 28 Sep 1993 22:39:06 +0000 (22:39 +0000)]
* gdb.t24 (demangle.exp): Accept "XXX const" as well as "const XXX".
Accept spaces various places.
Ian Lance Taylor [Tue, 28 Sep 1993 21:58:59 +0000 (21:58 +0000)]
* config/nm-sysv4.h: Include solib.h. Define SVR4_SHARED_LIBS.
* config/tm-sysv4.h: Don't include solib.h.
* config/xm-sysv4.h: Don't define SVR4_SHARED_LIBS.
* config/i386/i386v4.mt (TDEPFILES): Move solib.o from here...
* config/i386/i386v4.mh (NATDEPFILES): ...to here.
* config/i386/nm-i386v4.h: Include nm-sysv4.h.
* config/m68k/amix.mt (TDEPFIES): Move solib.o from here...
* config/m68k/amix.mh (NATDEPFILES): ...to here.
Jim Kingdon [Tue, 28 Sep 1993 21:47:15 +0000 (21:47 +0000)]
* section.c (bfd_make_section_anyway): New function.
* section.c: Change comments to say several sections can have
the same name.
* bfd-in2.h: Re-generate to reflect above change.
* coffgen.c (make_a_section_from_file): Call bfd_make_section_anyway
if still no section after the bfd_coff_make_section_hook.
* coffcode.h: Add comment about TWO_DATA_SECS.
Stan Shebs [Tue, 28 Sep 1993 20:59:59 +0000 (20:59 +0000)]
Lynx support
Stan Shebs [Tue, 28 Sep 1993 20:51:22 +0000 (20:51 +0000)]
Lynx support
Jim Kingdon [Tue, 28 Sep 1993 20:44:43 +0000 (20:44 +0000)]
* section.c (bfd_make_section_anyway): New function.
* section.c: Change comments to say several sections can have
the same name.
* bfd-in2.h: Re-generate to reflect above change.
* coffgen.c (make_a_section_from_file): Call bfd_make_section_anyway
if still no section after the bfd_coff_make_section_hook.
* coffcode.h: Add comment about TWO_DATA_SECS.
Stan Shebs [Tue, 28 Sep 1993 20:27:21 +0000 (20:27 +0000)]
Keep m68klynx.h
Stan Shebs [Tue, 28 Sep 1993 20:25:00 +0000 (20:25 +0000)]
Keep m68klynx.c
Stan Shebs [Tue, 28 Sep 1993 20:20:27 +0000 (20:20 +0000)]
Keep te-lynx.h
Stan Shebs [Tue, 28 Sep 1993 19:22:08 +0000 (19:22 +0000)]
More Lynx support, plus better stabs-in-coff generation.
Jim Kingdon [Tue, 28 Sep 1993 17:43:25 +0000 (17:43 +0000)]
Tue Sep 28 09:45:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES.
Clean up problems with targets and hosts that have 64 bit longs
and pointers and 32 bit ints.
* breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c,
ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c,
expprint.c, gdbtypes.c, infcmd.c, language.c, language.h,
m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h,
printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Change all printf formats from %x to %lx if outputting an address.
Change la_*_format to use long format.
local_hex_string, local_hex_string_custom now take an unsigned long
argument, change all callers.
* coffread.c (read_coff_symtab): Remove superfluous cast for
complaint output.
* dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int.
* findvar.c, value.h (write_register): Change register value to long.
* gdbtypes.h (struct type): Change `bitsize' to long as
TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer.
* inferior.h (struct inferior_status): Change type of stop_pc to
CORE_ADDR.
* language.h (local_octal_string, local_octal_string_custom):
Remove prototype, the functions are neither defined nor used.
* mipsread.c (parse_symbol): Use temporary variable for bitsize as
f->bitsize is a long now.
* objfiles.c (add_to_objfile_sections, build_objfile_section_table):
Use unsigned long casts instead of int for abusing sections_end
pointer as integer.
* stack.c (parse_frame_specification): Change type of `args' to
CORE_ADDR for SETUP_ARBITRARY_FRAME.
* printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE.
* mipsread.c (parse_type): Alpha cc now supports the t->continued
bit, update algorithm to match the way the compiler uses it.
Jim Kingdon [Tue, 28 Sep 1993 17:10:37 +0000 (17:10 +0000)]
* utils.c (fprintfi_filtered): Fix comments.
Jim Kingdon [Tue, 28 Sep 1993 16:23:44 +0000 (16:23 +0000)]
* main.c, utils.c: Add comments about immediate_quit.
Peter Schauer [Tue, 28 Sep 1993 10:23:52 +0000 (10:23 +0000)]
* ecoff.c (ecoff_slurp_symbolic_info): Always determine raw_size
explicitly.
* ecoff.c (ecoff_sec_to_styp_flags, ecoff_styp_to_sec_flags): Handle
.fini section.
Ken Raeburn [Tue, 28 Sep 1993 04:47:32 +0000 (04:47 +0000)]
Whitespace/comment cleanup. Use PARAMS in tc-vax.c.
Make various routines return null pointer instead of empty string for
success indication.
Stan Shebs [Tue, 28 Sep 1993 01:57:25 +0000 (01:57 +0000)]
Fix a typo
Stan Shebs [Tue, 28 Sep 1993 01:53:25 +0000 (01:53 +0000)]
New and improved Lynx support.
Stu Grossman [Tue, 28 Sep 1993 01:19:07 +0000 (01:19 +0000)]
* coffread.c (read_coff_symtab): Don't call getfilename if there
are no auxents.
David D. Zuhn [Tue, 28 Sep 1993 00:31:23 +0000 (00:31 +0000)]
hp300/hpux9 uses X11r5
This page took 0.04064 seconds and 4 git commands to generate.