James Smart [Wed, 15 Dec 2010 22:58:20 +0000 (17:58 -0500)]
[SCSI] lpfc 8.3.20: Update lpfc driver version to 8.3.20
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Smart [Wed, 15 Dec 2010 22:58:10 +0000 (17:58 -0500)]
[SCSI] lpfc 8.3.20: Updates to FC discovery commands
Updated commands used for ELS to utilize VPI
Allocate RPI at node creation time and pass in ELS commnads.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Smart [Wed, 15 Dec 2010 22:57:46 +0000 (17:57 -0500)]
[SCSI] lpfc 8.3.20: Implement new SLI4 init procedures based on if_type
Implement new SLI4 init procedures based on if_type:
- Add structure changes for new SLIPORT registers and BAR changes.
- Update register names to be consistent with inteface spec terms.
- Added union to encapsulate Hardward error registers.
- Rework lpfc_sli4_post_status_check() around SLI-4's SLI_INTF type
- Removed the lpfc_sli4_fw_cfg_check routine
- Segmented driver logic to include evaluation of the if_type to
engage different behaviors.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Smart [Wed, 15 Dec 2010 22:57:33 +0000 (17:57 -0500)]
[SCSI] lpfc 8.3.20: Implement the FC and SLI async event handlers
Implement the FC and SLI async event handlers:
- Updated MQ_CREATE_EXT mailbox structure to include fc and SLI async events.
- Added the SLI trailer code.
- Split physical field into type and number to reflect latest SLI spec.
- Changed lpfc_acqe_fcoe to lpfc_acqe_fip to reflect latest Spec changes.
- Added lpfc_acqe_fc_la structure for FC link attention async events.
- Added lpfc_acqe_sli structure for sli async events.
- Added lpfc_sli4_async_fc_evt routine to handle fc la async events.
- Added lpfc_sli4_async_sli routine to handle sli async events.
- Moved LPFC_TRAILER_CODE_FC to be handled by its own handler function.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Smart [Wed, 15 Dec 2010 22:57:20 +0000 (17:57 -0500)]
[SCSI] lpfc 8.3.20: Critical fixes
- Use for iocbq->context1 to hold the ndlp pointer.
- Set ndlp in all iocbs generated from ioctl functions.
- Turn parity and serr bits back on after performing sli4 board reset.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Krishna Gudipati [Tue, 14 Dec 2010 00:23:51 +0000 (16:23 -0800)]
[SCSI] bfa: Update the driver version to 2.3.2.3
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Krishna Gudipati [Tue, 14 Dec 2010 00:23:27 +0000 (16:23 -0800)]
[SCSI] bfa: io tag handling and minor bug fix.
Fix iotag handling:
1) Update and check io tag for retry case.
2) Clearing upper 3 bits in io tag when an IO completes.
The 3 upper bits in io tags are used for counting FCP exchange retry.
Un-cleared bits will cause firmware to access invalid memory when the
same io tag is used for an IO to a target that doesn't support FCP
exchange retry.
3) Only check the effective bits when validating an iotag.
Other minor fixes:
1) Added trace to get FC header type with assert of unhandled packet received.
Ignore the type FC_TYPE_FC_FSS (FC_XS).
2) Fixed the adapter info display check - to check for fcmode flag even.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Krishna Gudipati [Tue, 14 Dec 2010 00:17:42 +0000 (16:17 -0800)]
[SCSI] bfa: direct attach mode fix.
- Direct attach is not working due to the check of PID in fcxp_send request.
- Added logic to set the lps->lp_pid with the PID assigned for n2n mode.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Krishna Gudipati [Tue, 14 Dec 2010 00:17:11 +0000 (16:17 -0800)]
[SCSI] bfa: IOC auto recovery fix.
- Made IOC auto_recovery synchronized and not timer based.
- Only one PCI function will attempt to recover and reinitialize
the ASIC on a failure, after all the active PCI fns
acknowledge the IOC failure.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Krishna Gudipati [Tue, 14 Dec 2010 00:16:50 +0000 (16:16 -0800)]
[SCSI] bfa: Store port configuration in flash for persistency.
When the bfa driver is loaded a flogi is sent without the knowledge of
trunking configuration. This normal flogi causes the switch ports
which had trunking enabled to go to persistent offline. Solution is
to store the port configuration (which has trunking info) in the flash
for persistency. The firmware will read this configuration when the
very first fcport enable is received.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Krishna Gudipati [Tue, 14 Dec 2010 00:16:09 +0000 (16:16 -0800)]
[SCSI] bfa: IOC fwtrace save logic & state machine fixes.
- Move fw trace save logic to bfa_ioc_sm_fail_entry(),
so that fw trace is saved irrespective of the cause of the failure.
- Make bfa_ioc_sm_fail() a failure parking state.
- Rename bfa_ioc_sm_initfail() to a more appropriate bfa_ioc_sm_fail_retry()
as it is no longer a parking state.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Maggie Zhang [Fri, 10 Dec 2010 03:13:20 +0000 (19:13 -0800)]
[SCSI] bfa: remove unused functions and misc cleanups
Remove unused functions and fix checkpatch errors. Misc cleanups in
comment and formatting.
Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Maggie Zhang [Fri, 10 Dec 2010 03:12:32 +0000 (19:12 -0800)]
[SCSI] bfa: remove all OS wrappers
Remove OS wrapper functions/macros, and as a result remove bfa_os_inc.h.
Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Maggie Zhang [Fri, 10 Dec 2010 03:11:39 +0000 (19:11 -0800)]
[SCSI] bfa: remove all SCSI IO callbacks
Remove SCSI IO callbacks, and as a result remove bfa_cb_ioim.h.
Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Maggie Zhang [Fri, 10 Dec 2010 03:10:27 +0000 (19:10 -0800)]
[SCSI] bfa: scatter gather processing change
Modified scatter gather processing to use the kernel provided
scsi_for_each_sg() macro.
1) Instead of allocating and setting up sgpg in bfa_ioim_sge_setup(),
we only do allocation. As a result, we remove
bfa_ioim_sgpg_setup() and rename bfa_ioim_sge_setup() to
bfa_ioim_sgpg_alloc().
2) bfa_ioim_send_ioreq() call scsi_for_each_sg() to handle both inline
and sgpg setup.
Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Maggie Zhang [Fri, 10 Dec 2010 03:09:26 +0000 (19:09 -0800)]
[SCSI] bfa: remove a file with small size
Removed bfa_drv.c, merged it to bfa_core.c and modified Makefile.
Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Maggie Zhang [Fri, 10 Dec 2010 03:08:43 +0000 (19:08 -0800)]
[SCSI] bfa: clean up one line functions
Cleaned up one line functions.
Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Maggie Zhang [Fri, 10 Dec 2010 03:07:46 +0000 (19:07 -0800)]
[SCSI] bfa: remove unused and empty functions
Removed unused and empty functions.
Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <xmzhang@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Robert Jennings [Thu, 9 Dec 2010 20:03:59 +0000 (14:03 -0600)]
[SCSI] ibmvfc: Improve ibmvfc_async_desc memory layout
By changing field ordering we can avoid a couple of memory holes in
the tables that use the ibmvfc_async_desc structure.
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Stephen Hemminger [Thu, 9 Dec 2010 17:37:56 +0000 (09:37 -0800)]
[SCSI] iscsi: add module alias
Since iscsi transport can be built as a module and uses netlink socket
to communicate. The module should have an alias to autoload when socket
of NETLINK_ISCSI type is requested.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Christof Schmitt [Wed, 8 Dec 2010 16:30:46 +0000 (17:30 +0100)]
[SCSI] zfcp: Add allow_lun_scan module parameter
The zfcpdump tool requires a method to attach exactly one LUN. The
easiest way to achieve this is to add a new zfcp module parameter.
When allow_lun_scan is set to "false", zfcp only accepts LUNs that
have been configured through the unit_add sysfs interface.
Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Christof Schmitt [Thu, 2 Dec 2010 14:16:18 +0000 (15:16 +0100)]
[SCSI] zfcp: Add __init declaration to zfcp_cache_hw_align
The function zfcp_cache_hw_align is only called from zfcp_module_init,
so it should be declared with __init as well.
Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Christof Schmitt [Thu, 2 Dec 2010 14:16:17 +0000 (15:16 +0100)]
[SCSI] zfcp: Move qdio setup from erp to zfcp_qdio.c
Initialization of the qdio waitqueue should happen when the qdio data
is initialized and the QDIOUP flag should be handled in the qdio code
as well. Adjust the code accordingly and remove the superfluos
function zfcp_erp_adapter_strategy_open_qdio.
Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Swen Schillig [Thu, 2 Dec 2010 14:16:16 +0000 (15:16 +0100)]
[SCSI] zfcp: Redesign of the debug tracing final cleanup.
This patch is the final cleanup of the redesign from the zfcp tracing.
Structures and elements which were used by multiple areas of the
former debug tracing are now changed to the new scheme.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Swen Schillig [Thu, 2 Dec 2010 14:16:15 +0000 (15:16 +0100)]
[SCSI] zfcp: Redesign of the debug tracing for SCSI records.
This patch is the continuation to redesign the zfcp tracing to a more
straight-forward and easy to extend scheme.
This patch deals with all trace records of the zfcp SCSI area.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Swen Schillig [Thu, 2 Dec 2010 14:16:14 +0000 (15:16 +0100)]
[SCSI] zfcp: Redesign of the debug tracing for HBA records.
This patch is the continuation to redesign the zfcp tracing to a more
straight-forward and easy to extend scheme.
This patch deals with all trace records of the zfcp HBA area.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Swen Schillig [Thu, 2 Dec 2010 14:16:13 +0000 (15:16 +0100)]
[SCSI] zfcp: Redesign of the debug tracing for SAN records.
This patch is the continuation to redesign the zfcp tracing to a more
straight-forward and easy to extend scheme.
This patch deals with all trace records of the zfcp SAN area.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Swen Schillig [Thu, 2 Dec 2010 14:16:12 +0000 (15:16 +0100)]
[SCSI] zfcp: Redesign of the debug tracing for recovery actions.
The tracing environment of the zfcp LLD has become very bulky and hard
to maintain. Small changes involve a large modification process which
is error-prone and not effective. This patch is the first of a set to
redesign the zfcp tracing to a more straight-forward and easy to
extend scheme. It removes all interpretation and visualization parts
and focuses on bare logging of the information.
This patch deals with all trace records of the zfcp error recovery.
Signed-off-by: Swen schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Vikas Chaudhary [Fri, 3 Dec 2010 06:13:00 +0000 (22:13 -0800)]
[SCSI] qla4xxx: Update driver version to 5.02.00-k5
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Vikas Chaudhary [Fri, 3 Dec 2010 06:12:51 +0000 (22:12 -0800)]
[SCSI] qla4xxx: Updated the Copyright header
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Vikas Chaudhary [Fri, 3 Dec 2010 06:12:47 +0000 (22:12 -0800)]
[SCSI] qla4xxx: do not reset hba if ql4xdontresethba is set
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Lalit Chandivade [Fri, 3 Dec 2010 06:12:45 +0000 (22:12 -0800)]
[SCSI] qla4xxx: do not check for fw hung if reset retry is in progress
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Prasanna Mumbai [Fri, 3 Dec 2010 06:12:43 +0000 (22:12 -0800)]
[SCSI] qla4xxx: cache new IP address acquired via DHCP
Prior to firmware state change from ACQUIRING to READY, an
0x8029 AEN is received. Added code to check previous state
being ACQUIRING in order to update the ip address in the driver.
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Lalit Chandivade [Fri, 3 Dec 2010 06:12:40 +0000 (22:12 -0800)]
[SCSI] qla4xxx: Fail initialization if qla4_8xxx_pci_mem_write_2M fails
Since if fw load is failing, running on incomplete fw load would
be fatal.
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Lalit Chandivade [Fri, 3 Dec 2010 06:12:36 +0000 (22:12 -0800)]
[SCSI] qla4xxx: put device in FAILED state for 82XX initialization failure
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Lalit Chandivade [Fri, 3 Dec 2010 06:12:27 +0000 (22:12 -0800)]
[SCSI] qla4xxx: do not process interrupt unconditionally
in mailbox command do not process interrupt unconditionally,
process interrupt only in polling mode
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Karen Higgins [Fri, 3 Dec 2010 06:12:22 +0000 (22:12 -0800)]
[SCSI] qla4xxx: use correct fw_ddb_index in abort task
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Swapnil Nagle [Fri, 3 Dec 2010 06:12:15 +0000 (22:12 -0800)]
[SCSI] qla4xxx: memory wedge with peg_halt test in loop
Signed-off-by: Swapnil Nagle <swapnil.nagle@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Shyam Sundar [Fri, 3 Dec 2010 06:12:08 +0000 (22:12 -0800)]
[SCSI] qla4xxx: initialize MSI in correct way
IRQF_SHARED flag should not be set when calling request_irq for MSI since
this interrupt mechanism cannot be shared like standard INTx
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Vikas Chaudhary [Fri, 3 Dec 2010 06:12:03 +0000 (22:12 -0800)]
[SCSI] qla4xxx: Drop use of IRQF_DISABLE
IRQF_DISABLE flag is deprecated and this flag is a NOOP in kernel.
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Joe Eykholt [Wed, 1 Dec 2010 00:20:18 +0000 (16:20 -0800)]
[SCSI] libfc: fix statistics for FCP input/output megabytes
The statistics for InputMegabytes and OutputMegabytes are
misnamed. They're accumulating bytes, not megabytes.
The statistic returned via /sys must be in megabytes, however,
which is what the HBA-API wants. The FCP code needs to accumulate
it in bytes and then divide by 1,000,000 (not 2^20) before it
presented via sysfs.
This affects fcoe.ko only, not fnic. The fnic driver
correctly by accumulating bytes and then converts to megabytes.
I checked that libhbalinux is using the /sys file directly without
conversion.
BTW, qla2xxx does divide by 2^20, which I'm not fixing here.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Joe Eykholt [Wed, 1 Dec 2010 00:20:12 +0000 (16:20 -0800)]
[SCSI] libfcoe: change fip_select to return new FCF
Neaten several calls to fip_select() by having it return the
pointer to the new FCF.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Joe Eykholt [Wed, 1 Dec 2010 00:20:07 +0000 (16:20 -0800)]
[SCSI] libfcoe: reorder FCF list to put latest advertiser first
When there are several FCFs to choose from, the one most likely
to accept a FLOGI on certian switches is the one that last
answered a multicast solicit.
So, when receiving an advertisement, move the FCF to the front
of the list so that it gets chosen first among those with the
same priority.
Without this, more FLOGIs need to be sent in a test with
multiple FCFs and a switch in NPV mode, but it still
eventually finds one that accepts the FLOGI.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Joe Eykholt [Wed, 1 Dec 2010 00:20:02 +0000 (16:20 -0800)]
[SCSI] libfcoe: add debug message for FCF destination MAC
When multiple FCFs to the same fabric exist, the debug messages
all look alike. Change the message to include the MAC address.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Joe Eykholt [Wed, 1 Dec 2010 00:19:56 +0000 (16:19 -0800)]
[SCSI] libfcoe: retry rejected FLOGI to another FCF if possible
Switches using multiple-FCFs may reject FLOGI in order to
balance the load between multiple FCFs. Even though the FCF
was available, it may have more load at the point we actually
send the FLOGI.
If the FLOGI fails, select a different FCF
if possible, among those with the same priority. If no other
FCF is available, just deliver the reject to libfc for retry.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Joe Eykholt [Wed, 1 Dec 2010 00:19:51 +0000 (16:19 -0800)]
[SCSI] libfcoe: fix checking of conflicting fabrics in fcoe_ctlr_select()
The check for conflicting fabrics in fcoe_ctlr_select()
ignores any FCFs that aren't usable. This is a minor
problem now but becomes more pronounced after later patches.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Joe Eykholt [Wed, 1 Dec 2010 00:19:46 +0000 (16:19 -0800)]
[SCSI] libfcoe: move some timer code to make it reusable.
Move some of the code in fcoe_ctlr_timer_work() to
fcoe_ctlr_select() so that it can be shared
with another function in a forthcoming patch.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Joe Eykholt [Wed, 1 Dec 2010 00:19:40 +0000 (16:19 -0800)]
[SCSI] libfcoe: update FIP FCF announcements
Move the announcement code to a separate function for reuse in
a forthcoming patch.
For messages regarding FCF timeout and selection, use the
previously-announced FCF MAC address (dest_addr) in the fcoe_ctlr struct.
Only print (announce) the FCF if it is new. Print MAC for
timed-out or deselected FCFs.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Yi Zou [Wed, 1 Dec 2010 00:19:35 +0000 (16:19 -0800)]
[SCSI] libfc: fix fc_tm_done not freeing the allocated fsp pkt
Frame should be freed in fc_tm_done, this is an updated patch on the one
initially submitted by Hillf Danton.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Yi Zou [Wed, 1 Dec 2010 00:19:30 +0000 (16:19 -0800)]
[SCSI] libfc: the timeout for the REC itself is 2 * R_A_TOV_els
The timeout for the exchange carrying REC itself is 2 * R_A_TOV_els.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Yi Zou [Wed, 1 Dec 2010 00:19:25 +0000 (16:19 -0800)]
[SCSI] libfc: fix exchange being deleted when the abort itself is timed out
Should not continue when the abort itself is being timeout since in that case
the exchange will be deleted and relesased. We still want to call the
associated response handler to let the layer, e.g., fcp, know the exchange
itself is being timed out.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Yi Zou [Wed, 1 Dec 2010 00:19:20 +0000 (16:19 -0800)]
[SCSI] libfc: do not fc_io_compl on fsp w/o any scsi_cmnd associated
Do not call fc_io_compl() on fsp w/o any scsi_cmnd, e.g., lun reset is built
inside fc_fcp, not from a scsi command from queuecommnd from scsi-ml, so in
in case target is buggy that is invalid flags in the FCP_RSP, as we have seen
in some SAN Blaze target where all bits in flags are 0, we do not want to call
io_compl on this fsp.
[ Comment block added by Robert Love ]
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Yi Zou [Wed, 1 Dec 2010 00:19:15 +0000 (16:19 -0800)]
[SCSI] libfc: add print of exchange id for debugging fc_fcp
This is very helpful to match up the corresponding exchange to the actual I/O
described by the fsp, particularly when you do a side-by-side comparison of
the syslog with your trace.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Joe Perches [Wed, 1 Dec 2010 00:19:09 +0000 (16:19 -0800)]
[SCSI] drivers/scsi/fcoe: Update WARN uses
Add missing newlines.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Hillf Danton [Wed, 1 Dec 2010 00:19:04 +0000 (16:19 -0800)]
[SCSI] libfc: fix memory leakage in remote port
There seems rdata should get put before return.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Hillf Danton [Wed, 1 Dec 2010 00:18:59 +0000 (16:18 -0800)]
[SCSI] libfc: fix memory leakage in local port
There seems info should get freed when error encountered.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Hillf Danton [Wed, 1 Dec 2010 00:18:54 +0000 (16:18 -0800)]
[SCSI] libfc: fix memory leakage in local port
There seems info should get freed when error encountered.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
john fastabend [Wed, 1 Dec 2010 00:18:49 +0000 (16:18 -0800)]
[SCSI] libfc: remove tgt_flags from fc_fcp_pkt struct
We can easily remove the tgt_flags from fc_fcp_pkt struct
and use rpriv->tgt_flags directly where needed.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
john fastabend [Wed, 1 Dec 2010 00:18:44 +0000 (16:18 -0800)]
[SCSI] libfc: use rport timeout values for fcp recovery
Use the rport value for rec_tov for timeout values when
sending fcp commands. Currently, defaults are being used
which may or may not match the advertised values.
The default may cause i/o to timeout on networks that
set this value larger then the default value. To make
the timeout more configurable in the non-REC mode we
remove the FC_SCSI_ER_TIMEOUT completely allowing the
scsi-ml to do the timeout. This removes an unneeded
timer and allows the i/o timeout to be configured
using the scsi-ml knobs.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
john fastabend [Wed, 1 Dec 2010 00:18:39 +0000 (16:18 -0800)]
[SCSI] libfc: incorrect scsi host byte codes returned to scsi-ml
The fcp packet recovery handler fc_fcp_recover() is called
when errors occurr in a fcp session. Currently it is
generically setting the status code to FC_CMD_RECOVERY for
all error types. This results in DID_BUS_BUSY errors
being returned to the scsi-ml.
DID_BUS_BUSY errors indicate "BUS stayed busy through time
out period" according to scsi.h. Many of the error reported
by fc_rcp_recovery() are pkt errors. Here we update
fc_fcp_recovery to use better host byte codes.
With certain FAST FAIL flags set DID_BUS_BUSY and DID_ERROR
will have different behaviors this was causing dm multipath
to fail quickly in some cases where a retry would be a
better action.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Hillf Danton [Wed, 1 Dec 2010 00:18:33 +0000 (16:18 -0800)]
[SCSI] libfc: fix stats computation in fc_queuecommand()
There seems accumulation needed.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Hillf Danton [Wed, 1 Dec 2010 00:18:28 +0000 (16:18 -0800)]
[SCSI] libfc: fix mem leak in fc_seq_assign()
There is a typo cleaned, which triggers memory leakage.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Robert Love [Wed, 1 Dec 2010 00:18:23 +0000 (16:18 -0800)]
[SCSI] libfc: Fix incorrect locking and unlocking in FCP
The error handler grabs the si->scsi_queue_lock, but
in the case where the fsp pointer is NULL it releases
the scsi_host lock. This can lead to a variety of
system hangs depending on which is used first- the
scsi_host lock or the scsi_queue_lock.
This patch simply unlocks the correct lock when fcp
is NULL.
Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Hillf Danton [Wed, 1 Dec 2010 00:18:17 +0000 (16:18 -0800)]
[SCSI] libfc: tune fc_exch_em_alloc() to be O(2)
For allocating new exch from pool, scanning for free slot in exch
array fluctuates when exch pool is close to exhaustion.
The fluctuation is smoothed, and the scan looks to be O(2).
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Hillf Danton [Wed, 1 Dec 2010 00:18:12 +0000 (16:18 -0800)]
[SCSI] libfc: fix mem leak in fc_exch_recv_seq_resp()
There seems that ep should get released, or it will no longer get freed.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Yi Zou [Wed, 1 Dec 2010 00:18:07 +0000 (16:18 -0800)]
[SCSI] libfc: fix NULL pointer dereference bug in fc_fcp_pkt_release
This happens when then tearing down the fcoe interface with active I/O.
The back trace shows
dead000000200200 in RAX, i.e., LIST_POISON2, indicating
that the fsp is already being dequeued, which is probably why no complaining
was seen in fc_fcp_destroy() about outstanding fsp not freed, since we dequeue
it in the end of fc_io_compl() before releasing it. The bug is due to the
fact that we have already destroyed lport's scsi_pkt_pool while on-going i/o
is still accessing it through fc_fcp_pkt_release(), like this trace or the
similar code path from scsi-ml to fc_eh_abort, etc. This is fixed by moving
the fc_fcp_destroy() after lport is detached from scsi-ml since fc_fcp_destroy
is supposed to called only once where no lport lock is taken, otherwise the
fc_fcp_pkt_release() would have to grab the lport lock.
BUG: unable to handle kernel NULL pointer dereference at (null)
.......
RIP: 0010:[<
0000000000000000>]
[<(null)>] (null)
RSP: 0018:
ffff8803270f7b88 EFLAGS:
00010282
RAX:
dead000000200200 RBX:
ffff880197d2fbc0 RCX:
0000000000005908
RDX:
ffff880195ea6d08 RSI:
0000000000000282 RDI:
ffff880180f4fec0
RBP:
ffff8803270f7bc0 R08:
ffff880197d2fbe0 R09:
0000000000000000
R10:
ffff88032867f090 R11:
0000000000000000 R12:
ffff880195ea6d08
R13:
0000000000000282 R14:
ffff880180f4fec0 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff8801b5820000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0:
000000008005003b
CR2:
0000000000000000 CR3:
00000001a6eae000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Process fc_rport_eq (pid: 5278, threadinfo
ffff8803270f6000, task
ffff880326254ab0)
Stack:
ffffffffa02c39ca ffff8803270f7ba0 ffff88019331cbc0 ffff880197d2fbc0
0000000000000000 ffff8801a8c895e0 ffff8801a8c895e0 ffff8803270f7c10
ffffffffa02c4962 ffff8803270f7be0 ffffffff814c94ab ffff8803270f7c10
Call Trace:
[<
ffffffffa02c39ca>] ? fc_io_compl+0x10a/0x530 [libfc]
[<
ffffffffa02c4962>] fc_fcp_complete_locked+0x72/0x150 [libfc]
[<
ffffffff814c94ab>] ? _spin_unlock_bh+0x1b/0x20
[<
ffffffffa02b98ff>] ? fc_exch_done+0x3f/0x60 [libfc]
[<
ffffffffa02c4a8f>] fc_fcp_retry_cmd+0x4f/0x60 [libfc]
[<
ffffffffa02c6150>] fc_fcp_recv+0x9b0/0xc30 [libfc]
[<
ffffffff8106ba7a>] ? _call_console_drivers+0x4a/0x80
[<
ffffffff8107d5ec>] ? lock_timer_base+0x3c/0x70
[<
ffffffff8107e06b>] ? try_to_del_timer_sync+0x7b/0xe0
[<
ffffffffa02b9dcf>] fc_exch_mgr_reset+0x1df/0x250 [libfc]
[<
ffffffffa02c57a0>] ? fc_fcp_recv+0x0/0xc30 [libfc]
[<
ffffffffa02c1042>] fc_rport_work+0xf2/0x4e0 [libfc]
[<
ffffffff8109203e>] ? prepare_to_wait+0x4e/0x80
[<
ffffffffa02c0f50>] ? fc_rport_work+0x0/0x4e0 [libfc]
[<
ffffffff8108c6c0>] worker_thread+0x170/0x2a0
[<
ffffffff81091d50>] ? autoremove_wake_function+0x0/0x40
[<
ffffffff8108c550>] ? worker_thread+0x0/0x2a0
[<
ffffffff810919e6>] kthread+0x96/0xa0
[<
ffffffff810141ca>] child_rip+0xa/0x20
[<
ffffffff81091950>] ? kthread+0x0/0xa0
[<
ffffffff810141c0>] ? child_rip+0x0/0x20
Code:
Bad RIP value.
RIP
[<(null)>] (null)
RSP <
ffff8803270f7b88>
CR2:
0000000000000000
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Hillf Danton [Wed, 1 Dec 2010 00:18:01 +0000 (16:18 -0800)]
[SCSI] libfc: remove define of fc_seq_exch in fc_exch.c
The define for fc_seq_exch is unnecessary, since it also appears in scsi/libfc.h
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Maggie [Tue, 30 Nov 2010 02:26:32 +0000 (18:26 -0800)]
[SCSI] bfa: fix endianess sparse check warnings
First round of fix for the endianess check warnings from make C=2 CF="-D__CHECK_ENDIAN__".
Signed-off-by: Maggie <xmzhang@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Maggie [Tue, 30 Nov 2010 02:21:32 +0000 (18:21 -0800)]
[SCSI] bfa: fix regular sparse check warnings.
Fix all sparse check warnings from make C=2.
Signed-off-by: Maggie <xmzhang@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:32 +0000 (15:29 -0800)]
[SCSI] bnx2i: Updated version to 2.6.2.2
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:31 +0000 (15:29 -0800)]
[SCSI] bnx2i: Updated copyright and maintainer info
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:30 +0000 (15:29 -0800)]
[SCSI] bnx2i: Cleaned up various error conditions in ep_connect/disconnect
Various error conditions inside ep_connect and ep_disconnect were
either not being handled or not being handled correctly. This patch
fixes all those issues.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Acked-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:29 +0000 (15:29 -0800)]
[SCSI] bnx2i: Added return code check for chip kwqe submission request
Added the handling for cases when a chip request is made to the
CNIC module but the hardware is not ready to accept. This would
lead to many unnecessary wait timeouts.
This code adds check in the connect establishment and destruction
path.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:28 +0000 (15:29 -0800)]
[SCSI] bnx2i: Modified the bnx2i stop path to compensate for in progress ops
The stop path has been augmented to wait a max of 10s for all in
progress offload and destroy activities to complete before proceeding
to terminate all active connections (via iscsid or forcefully).
Note that any new offload and destroy requests are now blocked and
return to the caller immediately.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Acked-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:27 +0000 (15:29 -0800)]
[SCSI] bnx2i: Removed the dynamic registration of CNIC
The code no longer needs to dynamically register and unregister
the CNIC device. The CNIC device will be kept registered until
module unload.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:26 +0000 (15:29 -0800)]
[SCSI] bnx2i: Added mutex lock protection to conn_get_param
Added net_dev mutex lock protection before accessing the csk
parameters.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:25 +0000 (15:29 -0800)]
[SCSI] bnx2i: Allow to abort the connection if connect request times out
In the situation where the connect completion response arrives after
the connect request has already timed out, the connection was not being
aborted but only the resource was being freed. This creates a problem
for 5771X (10g) as the chip flags this with an assertion.
This change will properly aborts the connection before freeing the
resource.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:24 +0000 (15:29 -0800)]
[SCSI] bnx2i: Fixed the remote TCP RST handling for the 570X (1g)
Modified the handling of the remote TCP RST code so the chip can now
flush the tx pipe accordingly upon a remote TCP RST reception.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:23 +0000 (15:29 -0800)]
[SCSI] bnx2i: Fixed a cid leak issue for 5771X (10g)
A cid leak issue was found when the connect destroy request exceeded
the driver's disconnection timeout. This will lead to a cid resource
leak issue.
The fix is to allow the cid cleanup even when this happens.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Acked-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:22 +0000 (15:29 -0800)]
[SCSI] bnx2i: Fixed the endian bug in the TMF LUN cmd send
Added a be32_to_cpu call for the TMF LUN wqe.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:21 +0000 (15:29 -0800)]
[SCSI] bnx2i: Added fix for NOP-Out response panic from unsolicited NOP-In
The patch fixes the following situations where NOP-Out pkt is called for:
- local unsolicited NOP-Out requests (requesting no NOP-In response)
- local NOP-Out responses to unsolicited NOP-In requests
kernel panic is observed due to double session spin_lock requests; one in the
bnx2i_process_nopin_local_cmpl routine in bnx2i_hwi.c and the other in the
iscsi_put_task routine in libiscsi.c
The proposed fix is to export the currently static __iscsi_put_task() routine
and have bnx2i call it directly instead of the iscsi_put_task() routine which
holds the session spin lock.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Acked-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Eddie Wai [Tue, 23 Nov 2010 23:29:20 +0000 (15:29 -0800)]
[SCSI] bnx2i: Fixed bugs in the handling of unsolicited NOP-Ins
Unsolicited NOP-Ins are placed in the receive queue of the hardware
which requires to be read out regardless if the receive pipe is suspended
or not. This patch adds the disposal of this RQ element under this
condition.
Also fixed the bug in the unsolicited NOP-In handling routine which
checks for the RESERVED_ITT.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 23:12:28 +0000 (04:42 +0530)]
[SCSI] mpt2sas: Bump version 07.100.00.00
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 23:11:32 +0000 (04:41 +0530)]
[SCSI] mpt2sas: Debug string changes from target to device.
Changing debug print to correct string.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 23:10:51 +0000 (04:40 +0530)]
[SCSI] mpt2sas: Sanity check for phy count is added using max phy count
Fix oops loading driver when there is direct attached
SEP device
The driver set max phys count to the value reported in sas iounit page
zero. However this page doesn't take into account additional virutal
phys. When sas topology event arrives, the phy count is larger than
expected, and the driver accesses memory array beyond the end of
allocated space, then oops. Manufacturing page 8 contains the info
on direct attached phys.
For this fix will making sure that sas topology event is not
processing phys greater than the expected phy count.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 23:09:11 +0000 (04:39 +0530)]
[SCSI] mpt2sas: change queue depth with reason argument more appropriately
change_queue_depth callback API changed
The change_queue_depth callback changed where there is now an additional
parameter called reason, with SCSI_QDEPTH_DEFAULT, SCSI_QDEPTH_QFULL,
and SCSI_QDEPTH_RAMP_UP codes.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 23:07:36 +0000 (04:37 +0530)]
[SCSI] mpt2sas: Remove code for TASK_SET_FULL from driver.
remove support for MPI2_EVENT_TASK_SET_FULL
This event is obsoleted, so this processing of this event
needs to be removed from the driver. The controller firmware is going
to handle TASK_SET_FULL, the driver doesn't need to do anything.
Even though we are removing the EVENT handling, the behavour has not
changed between driver versions becuase fimrware will still be handling
queue throttling, and retrying of commands when the target device queues
are full.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 23:06:14 +0000 (04:36 +0530)]
[SCSI] mpt2sas: MPI 2.0 Header updated
MPI2 Rev header files.
1) Removed Task Set Full Event. Modified description of Disable SCSI
Initiator Task Set Full Handling bit in the Flags field of IO Unit
Page 1. Modified the descriptions for the three queue depth fields in
SAS IO Unit Page 1.
(2) Added new value for the Current Operation bits of the Flags field
in the RAID Volume Indicator Structure to indicate that the Make Data
Consistent operation is running.
(3) Added a value of 0x6 to various SAS link rate fields to indicate an
attached PHY that is not using any commonly supported settings.
(4) Added Volume Not Consistent bit to the VolumeStatusFlags field of
RAID Volume Page 0.
(5) Added a new value for the IncompatibleReason field of RAID Physical
Disk Page 0 to indicate an incompatible media type.
(6) Added Diagnostic Data Upload tool for the Toolbox Request.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 23:05:30 +0000 (04:35 +0530)]
[SCSI] mpt2sas: Modify code to support Expander switch
Issue : Switch swap doesn't work when device missing delay is enabled.
(1) add support to individually add and remove phys to and from
existing ports. This replaces the routine
_transport_delete_duplicate_port.
(2) _scsih_sas_host_refresh - was modified to change the link rate
from zero to 1.5 GB rate when the firmware reports there is an
attached device with zero link.
(3) add new function mpt2sas_device_remove, this is wrapper function
deletes some redundant code through out driver by combining into one
subrountine
(4) two subroutines were modified so the sas_device, raid_device, and
port lists are traversed once when objects are deleted from the list.
Previously it was looping back each time an object was deleted from the
list.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 23:04:06 +0000 (04:34 +0530)]
[SCSI] mpt2sas: Create a pool of chain buffer instead of dedicated per IOs
Create a pool of chain buffers, instead of dedicated per IO:
This enahancment is to address memory allocation failure when asking
for more than 2300 IOs per host. There is just not enough contiquious
DMA physical memory to make one single allocation to hold both message
frames and chain buffers when asking for more than 2300 request. In order
to address this problem we will have to allocate memory for each chain
buffer in a seperate individual memory allocation, placing each chain
element of 128 bytes onto a pool of available chains, which can be
shared amoung all request.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 23:02:18 +0000 (04:32 +0530)]
[SCSI] mpt2sas: Added loadtime para for IOMissingDelay and DMD
Ability to override/set the ReportDeviceMissingDelay and
IODeviceMissingDelay from driver: Add new command line option missing_delay,
this is an array, where the first element is the device missing delay,
and the second element is io missing delay. The driver will program
sas iounit page 1 with the new setting when the driver loads. This is
programmed to the current and persistent configuration page so this takes
immediately, as will be sticky across host reboots.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 23:01:14 +0000 (04:31 +0530)]
[SCSI] mpt2sas: Added sanity check for cb_idx and smid access.
Sometime it is seen that controller
firmware returns an invalid system message id (smid).
the oops is occurring becuase mpt_callbacks pointer is referenced to
either null or invalid virtual address. this is due to cb_idx set
incorrectly from routine _base_get_cb_idx. the cb_idx was set incorrectly
becuase there is no check to make sure smid is less than maxiumum
anticapted smid. to fix this issue, we add a check in
_base_get_cb_idx to make sure smid is not greater than
ioc->hba_queue_depth. in addition, a similar check was added to make
sure the reply address was less than the largest anticapated address.
Newer firmware has sovled this issue, however it good to have this sanity
check.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Kashyap, Desai [Fri, 12 Nov 2010 22:59:20 +0000 (04:29 +0530)]
[SCSI] mpt2sas: Removed compiler warnnings when logging is disabled
The compiler throws warning messages while compiling without
CONFIG_SCSI_MPT2SAS_LOGGING.
Set proper ifdef for CONFIG_SCSI_MPT2SAS_LOGGING to avoid warnnings.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Smart [Sun, 21 Nov 2010 04:12:11 +0000 (23:12 -0500)]
[SCSI] lpfc 8.3.19: Update lpfc driver version to 8.3.19
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Smart [Sun, 21 Nov 2010 04:12:02 +0000 (23:12 -0500)]
[SCSI] lpfc 8.3.19: Change heartbeat to default to disabled
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Smart [Sun, 21 Nov 2010 04:11:55 +0000 (23:11 -0500)]
[SCSI] lpfc 8.3.19: Added support for ELS RRQ command
Added support for ELS RRQ command
- Add new routine lpfc_set_rrq_active() to track XRI qualifier state.
- Add new module parameter lpfc_enable_rrq to control RRQ operation.
- Add logic to ELS RRQ completion handler and xri qualifier timeout
to clear XRI qualifier state.
- Use OX_ID from XRI_ABORTED_CQE for RRQ payload.
- Tie abort and XRI_ABORTED_CQE andler to RRQ generation.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Smart [Sun, 21 Nov 2010 04:11:48 +0000 (23:11 -0500)]
[SCSI] lpfc 8.3.19: Add SLI4 FC Discovery support
Add SLI4 FC Discovery support
- Replace READ_LA and READ_LA64 with READ_TOPOLOGY mailbox command.
- Converted the old READ_LA structure to use bf_set/get instead of bit fields.
- Rename HBA_FCOE_SUPPORT flag to HBA_FCOE_MODE. Flag now indicates function
is running as SLI-4 FC or FCoE port. Make sure flag reset each time
READ_REV completed as it can dynamically change.
- Removed BDE union in the READ_TOPOLOGY mailbox command and added a define to
define the ALPA MAP SIZE. Added FC Code for async events.
- Added code to support new 16G link speed.
- Define new set of values to keep track of valid user settable link speeds.
- Used new link speed definitions to define link speed max and bitmap.
- Redefined FDMI Port sppeds to be hax values and added the 16G value.
- Added new CQE trailer code for FC Events.
- Add lpfc_issue_init_vfi and lpfc_init_vfi_cmpl routines.
- Replace many calls to the initial_flogi routine with lpfc_issue_init_vfi.
- Add vp and vpi fields to the INIT_VFI mailbox command.
- Addapt lpfc_hba_init_link routine for SLI4 use.
- Use lpfc_hba_init_link call from lpfc_sli4_hba_setup.
- Add a check for FC mode to register the FCFI before init link.
- Convert lpfc_sli4_init_vpi to be called without a vpi (get it from vport).
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Smart [Sun, 21 Nov 2010 04:11:37 +0000 (23:11 -0500)]
[SCSI] lpfc 8.3.19: Add latest SLI4 Hardware initialization support
- Add the Lancer FC and FCoE PCI IDs
- Add new SLI4 INTF register definitions
- Implement new SLI4 doorbell register
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Smart [Sun, 21 Nov 2010 04:14:19 +0000 (23:14 -0500)]
[SCSI] lpfc 8.3.19: Fix critical errors and crashes
Fix critical errors and crashes
- Replace LOF_SECURITY with LOG_SECURITY
- When calculating diag test memory size, use full size with header.
- Return LS_RJT with status=UNSUPPORTED on unrecognized ELS's
- Correct NULL pointer dereference when lpfc_create_vport_work_array()
returns NULL.
- Added code to handle CVL when port is in LPFC_VPORT_FAILED state.
- In lpfc_do_scr_ns_plogi, check the nodelist for FDMI_DID and reuse
the resource.
- Check for generic request 64 and calculate the sgl offset for the request
and reply sgls, also calculate the xmit length using only the request bde.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
James Bottomley [Mon, 25 Oct 2010 20:53:41 +0000 (15:53 -0500)]
[SCSI] fix id computation in scsi_eh_target_reset()
The current code in scsi_eh_target_reset() has an off by one error
that actually sends spurious extra resets. Since there's no real need
to reset the targets in numerical order, simply chunk up the command
recovery list doing target resets and pulling matching targets out of
the list (that also makes the loop O(N) instead of O(N^2).
[mike christie found and fixed a list_splice -> list_splice_init problem]
Reported-by: Hillf Danton<dhillf@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This page took 0.046567 seconds and 5 git commands to generate.