Ingo Molnar [Tue, 25 Mar 2014 05:45:39 +0000 (06:45 +0100)]
Merge branch 'rcu/next' of git://git./linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU update from Paul E. McKenney:
" [...] one late-breaking commit. This one was requested for 3.15 by Peter Zijlstra.
It is low risk because it adds a new in-kernel API with minimal changes to the
existing code. Those minimal changes are the addition of memory barriers and
ACCESS_ONCE() macro calls, neither of which should be able to break things.
This commit has passed significant rcutorture testing, with these additional
additions to rcutorture slated for 3.16. This commit has also been exposed to
-next testing. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Paul E. McKenney [Fri, 14 Mar 2014 23:37:08 +0000 (16:37 -0700)]
rcu: Provide grace-period piggybacking API
The following pattern is currently not well supported by RCU:
1. Make data element inaccessible to RCU readers.
2. Do work that probably lasts for more than one grace period.
3. Do something to make sure RCU readers in flight before #1 above
have completed.
Here are some things that could currently be done:
a. Do a synchronize_rcu() unconditionally at either #1 or #3 above.
This works, but imposes needless work and latency.
b. Post an RCU callback at #1 above that does a wakeup, then
wait for the wakeup at #3. This works well, but likely results
in an extra unneeded grace period. Open-coding this is also
a bit more semi-tricky code than would be good.
This commit therefore adds get_state_synchronize_rcu() and
cond_synchronize_rcu() APIs. Call get_state_synchronize_rcu() at #1
above and pass its return value to cond_synchronize_rcu() at #3 above.
This results in a call to synchronize_rcu() if no grace period has
elapsed between #1 and #3, but requires only a load, comparison, and
memory barrier if a full grace period did elapse.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Ingo Molnar [Fri, 28 Feb 2014 07:38:30 +0000 (08:38 +0100)]
Merge branch 'rcu/next' of git://git./linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:
* Update RCU documentation. These were posted to LKML at
https://lkml.org/lkml/2014/2/17/555.
* Miscellaneous fixes. These were posted to LKML at
https://lkml.org/lkml/2014/2/17/530. Note that two of these
are RCU changes to other maintainer's trees:
add1f0995454
(fs) and
8857563b819b (notifer), both of which substitute
rcu_access_pointer() for rcu_dereference_raw().
* Real-time latency fixes. These were posted to LKML at
https://lkml.org/lkml/2014/2/17/544.
* Torture-test changes, including refactoring of rcutorture
and introduction of a vestigial locktorture. These were posted
to LKML at https://lkml.org/lkml/2014/2/17/599.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Paul E. McKenney [Wed, 26 Feb 2014 14:38:59 +0000 (06:38 -0800)]
Merge branch 'torture.2014.02.23a' into HEAD
torture.2014.02.23a: locktorture addition and rcutorture changes
Paul E. McKenney [Wed, 26 Feb 2014 14:36:09 +0000 (06:36 -0800)]
Merge branches 'doc.2014.02.24a', 'fixes.2014.02.26a' and 'rt.2014.02.17b' into HEAD
doc.2014.02.24a: Documentation changes
fixes.2014.02.26a: Miscellaneous fixes
rt.2014.02.17b: Response-time-related changes
Paul Gortmaker [Wed, 19 Feb 2014 19:33:27 +0000 (14:33 -0500)]
rcu: Ensure kernel/rcu/rcu.h can be sourced/used stand-alone
The kbuild test bot uncovered an implicit dependence on the
trace header being present before rcu.h in ia64 allmodconfig
that looks like this:
In file included from kernel/ksysfs.c:22:0:
kernel/rcu/rcu.h: In function '__rcu_reclaim':
kernel/rcu/rcu.h:107:3: error: implicit declaration of function 'trace_rcu_invoke_kfree_callback' [-Werror=implicit-function-declaration]
kernel/rcu/rcu.h:112:3: error: implicit declaration of function 'trace_rcu_invoke_callback' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
Looking at other rcu.h users, we can find that they all
were sourcing the trace header in advance of rcu.h itself,
as seen in the context of this diff. There were also some
inconsistencies as to whether it was or wasn't sourced based
on the parent tracing Kconfig.
Rather than "fix" it at each use site, and have inconsistent
use based on whether "#ifdef CONFIG_RCU_TRACE" was used or not,
lets just source the trace header just once, in the actual consumer
of it, which is rcu.h itself. We include it unconditionally, as
build testing shows us that is a hard requirement for some files.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul Gortmaker [Tue, 11 Feb 2014 21:10:12 +0000 (16:10 -0500)]
rcu: Fix sparse warning for rcu_expedited from kernel/ksysfs.c
This commit fixes the follwoing warning:
kernel/ksysfs.c:143:5: warning: symbol 'rcu_expedited' was not declared. Should it be static?
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
[ paulmck: Moved the declaration to include/linux/rcupdate.h to avoid
including the RCU-internal rcu.h file outside of RCU. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Wed, 12 Feb 2014 21:02:22 +0000 (13:02 -0800)]
notifier: Substitute rcu_access_pointer() for rcu_dereference_raw()
(Trivial patch.)
If the code is looking at the RCU-protected pointer itself, but not
dereferencing it, the rcu_dereference() functions can be downgraded
to rcu_access_pointer(). This commit makes this downgrade in
__blocking_notifier_call_chain() which simply compares the RCU-protected
pointer against NULL with no dereferencing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Linus Torvalds [Tue, 25 Feb 2014 23:38:13 +0000 (15:38 -0800)]
Merge branch 'akpm' (patches from Andrew Morton)
Merge misc fixes from Andrew Morton.
* emailed patches from Andrew Morton akpm@linux-foundation.org>:
MAINTAINERS: change mailing list address for Altera UART drivers
Makefile: fix build with make 3.80 again
MAINTAINERS: update L: misuses
Makefile: fix extra parenthesis typo when CC_STACKPROTECTOR_REGULAR is enabled
ipc,mqueue: remove limits for the amount of system-wide queues
memcg: change oom_info_lock to mutex
mm, thp: fix infinite loop on memcg OOM
drivers/fmc/fmc-write-eeprom.c: fix decimal permissions
drivers/iommu/omap-iommu-debug.c: fix decimal permissions
mm, hwpoison: release page on PageHWPoison() in __do_fault()
Tobias Klauser [Tue, 25 Feb 2014 23:01:49 +0000 (15:01 -0800)]
MAINTAINERS: change mailing list address for Altera UART drivers
The nios2-dev list has been moved to the RocketBoards infrastructure, so
adjust the address accordingly.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Beulich [Tue, 25 Feb 2014 23:01:48 +0000 (15:01 -0800)]
Makefile: fix build with make 3.80 again
According to Documentation/Changes, make 3.80 is still being supported
for building the kernel, hence make files must not make (unconditional)
use of features introduced only in newer versions. Commit
8779657d29c0
("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG") however
introduced an "else ifdef" construct which make 3.80 doesn't understand.
Also correct a warning message still referencing the old config option
name.
Apart from that I question the use of "ifdef" here (but it was used that
way already prior to said commit): ifeq (,y) would seem more to the
point.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 25 Feb 2014 23:01:47 +0000 (15:01 -0800)]
MAINTAINERS: update L: misuses
L: lines are for the email addresses of traditional mailing lists.
W: lines are for URLs.
Convert two L: misuses to W: links.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fathi Boudra [Tue, 25 Feb 2014 23:01:46 +0000 (15:01 -0800)]
Makefile: fix extra parenthesis typo when CC_STACKPROTECTOR_REGULAR is enabled
An extra parenthesis typo introduced in
19952a92037e ("stackprotector:
Unify the HAVE_CC_STACKPROTECTOR logic between architectures") is
causing the following error when CONFIG_CC_STACKPROTECTOR_REGULAR is
enabled:
Makefile:608: Cannot use CONFIG_CC_STACKPROTECTOR: -fstack-protector not supported by compiler
Makefile:608: *** missing separator. Stop.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Tue, 25 Feb 2014 23:01:45 +0000 (15:01 -0800)]
ipc,mqueue: remove limits for the amount of system-wide queues
Commit
93e6f119c0ce ("ipc/mqueue: cleanup definition names and
locations") added global hardcoded limits to the amount of message
queues that can be created. While these limits are per-namespace,
reality is that it ends up breaking userspace applications.
Historically users have, at least in theory, been able to create up to
INT_MAX queues, and limiting it to just 1024 is way too low and dramatic
for some workloads and use cases. For instance, Madars reports:
"This update imposes bad limits on our multi-process application. As
our app uses approaches that each process opens its own set of queues
(usually something about 3-5 queues per process). In some scenarios
we might run up to 3000 processes or more (which of-course for linux
is not a problem). Thus we might need up to 9000 queues or more. All
processes run under one user."
Other affected users can be found in launchpad bug #
1155695:
https://bugs.launchpad.net/ubuntu/+source/manpages/+bug/
1155695
Instead of increasing this limit, revert it entirely and fallback to the
original way of dealing queue limits -- where once a user's resource
limit is reached, and all memory is used, new queues cannot be created.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reported-by: Madars Vitolins <m@silodev.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org> [3.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Tue, 25 Feb 2014 23:01:44 +0000 (15:01 -0800)]
memcg: change oom_info_lock to mutex
Kirill has reported the following:
Task in /test killed as a result of limit of /test
memory: usage 10240kB, limit 10240kB, failcnt 51
memory+swap: usage 10240kB, limit 10240kB, failcnt 0
kmem: usage 0kB, limit 18014398509481983kB, failcnt 0
Memory cgroup stats for /test:
BUG: sleeping function called from invalid context at kernel/cpu.c:68
in_atomic(): 1, irqs_disabled(): 0, pid: 66, name: memcg_test
2 locks held by memcg_test/66:
#0: (memcg_oom_lock#2){+.+...}, at: [<
ffffffff81131014>] pagefault_out_of_memory+0x14/0x90
#1: (oom_info_lock){+.+...}, at: [<
ffffffff81197b2a>] mem_cgroup_print_oom_info+0x2a/0x390
CPU: 2 PID: 66 Comm: memcg_test Not tainted 3.14.0-rc1-dirty #745
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Bochs 01/01/2011
Call Trace:
__might_sleep+0x16a/0x210
get_online_cpus+0x1c/0x60
mem_cgroup_read_stat+0x27/0xb0
mem_cgroup_print_oom_info+0x260/0x390
dump_header+0x88/0x251
? trace_hardirqs_on+0xd/0x10
oom_kill_process+0x258/0x3d0
mem_cgroup_oom_synchronize+0x656/0x6c0
? mem_cgroup_charge_common+0xd0/0xd0
pagefault_out_of_memory+0x14/0x90
mm_fault_error+0x91/0x189
__do_page_fault+0x48e/0x580
do_page_fault+0xe/0x10
page_fault+0x22/0x30
which complains that mem_cgroup_read_stat cannot be called from an atomic
context but mem_cgroup_print_oom_info takes a spinlock. Change
oom_info_lock to a mutex.
This was introduced by
947b3dd1a84b ("memcg, oom: lock
mem_cgroup_print_oom_info").
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Tue, 25 Feb 2014 23:01:42 +0000 (15:01 -0800)]
mm, thp: fix infinite loop on memcg OOM
Masayoshi Mizuma reported a bug with the hang of an application under
the memcg limit. It happens on write-protection fault to huge zero page
If we successfully allocate a huge page to replace zero page but hit the
memcg limit we need to split the zero page with split_huge_page_pmd()
and fallback to small pages.
The other part of the problem is that VM_FAULT_OOM has special meaning
in do_huge_pmd_wp_page() context. __handle_mm_fault() expects the page
to be split if it sees VM_FAULT_OOM and it will will retry page fault
handling. This causes an infinite loop if the page was not split.
do_huge_pmd_wp_zero_page_fallback() can return VM_FAULT_OOM if it failed
to allocate one small page, so fallback to small pages will not help.
The solution for this part is to replace VM_FAULT_OOM with
VM_FAULT_FALLBACK is fallback required.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 25 Feb 2014 23:01:41 +0000 (15:01 -0800)]
drivers/fmc/fmc-write-eeprom.c: fix decimal permissions
This 444 should have been octal.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 25 Feb 2014 23:01:40 +0000 (15:01 -0800)]
drivers/iommu/omap-iommu-debug.c: fix decimal permissions
These should have been octal.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Tue, 25 Feb 2014 23:01:39 +0000 (15:01 -0800)]
mm, hwpoison: release page on PageHWPoison() in __do_fault()
It seems we forget to release page after detecting HW error.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 25 Feb 2014 21:18:57 +0000 (13:18 -0800)]
Merge tag 'dmaengine-fixes-3.14-rc4' of git://git./linux/kernel/git/djbw/dmaengine
Pull dmaengine fixes from Dan Williams:
"Fix tasklet lifetime management in the ioat driver causing ksoftirqd
to spin indefinitely.
References:
https://lkml.org/lkml/2014/1/27/282
https://lkml.org/lkml/2014/2/19/672"
* tag 'dmaengine-fixes-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
ioat: fix tasklet tear down
Linus Torvalds [Tue, 25 Feb 2014 21:16:05 +0000 (13:16 -0800)]
Merge tag 'for-linus-
20140225' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Two main MTD fixes:
1. Read retry counting was off by one, so if we had a true ECC error
(i.e., no retry voltage threshold would give a clean read), we
would end up returning -EINVAL on the Nth mode instead of -EBADMSG
after then (N-1)th mode
2. The OMAP NAND driver had some of its ECC layouts wrong when
introduced in 3.13, causing incompatibilities between the
bootloader on-flash layout and the layout expected in Linux. The
expected layouts are now documented in the commit messages, and we
plan to add this under Documentation/mtd/nand/ eventually"
* tag 'for-linus-
20140225' of git://git.infradead.org/linux-mtd:
mtd: nand: omap: fix ecclayout->oobfree->length
mtd: nand: omap: fix ecclayout->oobfree->offset
mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver
mtd: nand: fix off-by-one read retry mode counting
Linus Torvalds [Tue, 25 Feb 2014 21:12:19 +0000 (13:12 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k update from Geert Uytterhoeven:
- More barrier.h consolidation
- Sched_[gs]etattr() syscalls
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Wire up sched_setattr and sched_getattr
m68k: Switch to asm-generic/barrier.h
m68k: Sort arch/m68k/include/asm/Kbuild
Linus Torvalds [Tue, 25 Feb 2014 21:10:48 +0000 (13:10 -0800)]
Merge tag 'xtensa-next-
20140224' of git://github.com/czankel/xtensa-linux
Pull tensa fixes from Chris Zankel:
"This series includes fixes for potentially serious bugs in the
routines spilling processor registers to stack, as well as other
issues and compiler errors and warnings.
- allow booting xtfpga on boards with new uBoot and >128MBytes memory
- drop nonexistent GPIO32 support from fsf variant
- don't select USE_GENERIC_SMP_HELPERS
- enable common clock framework support, set up ethoc clock on xtfpga
- wire up sched_setattr and sched_getattr syscalls.
- fix system call to spill the processor registers to stack.
- improve kernel macro to spill the processor registers
- export ccount_freq symbol
- fix undefined symbol warning"
* tag 'xtensa-next-
20140224' of git://github.com/czankel/xtensa-linux:
xtensa: wire up sched_setattr and sched_getattr syscalls
xtensa: xtfpga: set ethoc clock frequency
xtensa: xtfpga: use common clock framework
xtensa: support common clock framework
xtensa: no need to select USE_GENERIC_SMP_HELPERS
xtensa: fsf: drop nonexistent GPIO32 support
xtensa: don't pass high memory to bootmem allocator
xtensa: fix fast_syscall_spill_registers
xtensa: fix fast_syscall_spill_registers
xtensa: save current register frame in fast_syscall_spill_registers_fixup
xtensa: introduce spill_registers_kernel macro
xtensa: export ccount_freq
xtensa: fix warning '"CONFIG_OF" is not defined'
Dan Williams [Thu, 20 Feb 2014 00:19:35 +0000 (16:19 -0800)]
ioat: fix tasklet tear down
Since commit
77873803363c "net_dma: mark broken" we no longer pin dma
engines active for the network-receive-offload use case. As a result
the ->free_chan_resources() that occurs after the driver self test no
longer has a NET_DMA induced ->alloc_chan_resources() to back it up. A
late firing irq can lead to ksoftirqd spinning indefinitely due to the
tasklet_disable() performed by ->free_chan_resources(). Only
->alloc_chan_resources() can clear this condition in affected kernels.
This problem has been present since commit
3e037454bcfa "I/OAT: Add
support for MSI and MSI-X" in 2.6.24, but is now exposed. Given the
NET_DMA use case is deprecated we can revisit moving the driver to use
threaded irqs. For now, just tear down the irq and tasklet properly by:
1/ Disable the irq from triggering the tasklet
2/ Disable the irq from re-arming
3/ Flush inflight interrupts
4/ Flush the timer
5/ Flush inflight tasklets
References:
https://lkml.org/lkml/2014/1/27/282
https://lkml.org/lkml/2014/2/19/672
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Reported-by: Mike Galbraith <bitbucket@online.de>
Reported-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Tested-by: Mike Galbraith <bitbucket@online.de>
Tested-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Paul E. McKenney [Sun, 23 Feb 2014 16:34:24 +0000 (08:34 -0800)]
Documentation/memory-barriers.txt: Clarify release/acquire ordering
This commit fixes a couple of typos and clarifies what happens when
the CPU chooses to execute a later lock acquisition before a prior
lock release, in particular, why deadlock is avoided.
Reported-by: Peter Hurley <peter@hurleysoftware.com>
Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Linus Torvalds [Mon, 24 Feb 2014 16:03:54 +0000 (08:03 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull SELinux endianness fix from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
SELinux: bigendian problems with filename trans rules
Linus Torvalds [Mon, 24 Feb 2014 15:58:50 +0000 (07:58 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 bug fixes from Martin Schwidefsky:
"A couple of s390 bug fixes. The PCI segment boundary issue is a nasty
one as it can lead to data corruption"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: Fix missing subchannels after CHPID configure on
s390/pci/dma: use correct segment boundary size
s390/compat: fix sys_sched_getattr compat wrapper
s390/zcrypt: additional check to avoid overflow in msg-type 6 requests
Chris Zankel [Mon, 24 Feb 2014 08:34:36 +0000 (00:34 -0800)]
Merge tag 'xtensa-for-next-
20140221-1' into for_next
Xtensa fixes for 3.14:
- allow booting xtfpga on boards with new uBoot and >128MBytes memory;
- drop nonexistent GPIO32 support from fsf variant;
- don't select USE_GENERIC_SMP_HELPERS;
- enable common clock framework support, set up ethoc clock on xtfpga;
- wire up sched_setattr and sched_getattr syscalls.
Signed-off-by: Chris Zankel <chris@zankel.net>
James Morris [Mon, 24 Feb 2014 03:40:16 +0000 (14:40 +1100)]
Merge branch 'stable-3.14' of git://git.infradead.org/users/pcmoore/selinux into for-linus
Linus Torvalds [Mon, 24 Feb 2014 01:40:03 +0000 (17:40 -0800)]
Linux 3.14-rc4
Linus Torvalds [Mon, 24 Feb 2014 01:38:04 +0000 (17:38 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes for ARM platforms. Most are fixes for DTS
files, mostly from DT conversion on OMAP which is still finding a few
issues here and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache
configuration fix for Tegra, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
ARM: tegra: only run PL310 init on systems with one
ARM: tegra: Add head numbers to display controllers
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
ARM: tegra: fix RTC0 alias for Cardhu
ARM: dove: dt: revert PMU interrupt controller node
Documentation: dt: OMAP: Update Overo/Tobi
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
ARM: OMAP2+: Remove legacy macros for zoom platforms
ARM: OMAP2+: Remove MACH_NOKIA_N800
ARM: dts: N900: add missing compatible property
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
ARM: OMAP1: nokia770: enable tahvo-usb
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
ARM: dts: omap3-gta04: Fix mmc1 properties.
ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
ARM: OMAP2+: add missing ARCH_HAS_OPP
...
Linus Torvalds [Mon, 24 Feb 2014 01:37:25 +0000 (17:37 -0800)]
Merge tag 'regulator-v3.14-rc4' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Mostly unexciting driver fixes, plus one fix to lower the severity of
the log message when we don't use an optional regulator - the fixes
for ACPI system made this come up more often and it was correctly
observed that it was causing undue concern for users"
* tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max14577: Fix invalid return value on DT parse success
regulator: core: Change dummy supplies error message to a warning
regulator: s5m8767: Add missing of_node_put
regulator: s5m8767: Use of_get_child_by_name
regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
Pekon Gupta [Mon, 17 Feb 2014 07:41:25 +0000 (13:11 +0530)]
mtd: nand: omap: fix ecclayout->oobfree->length
This patch excludes reserved-marker byte-position from oobfree->length
calculation. Thus all bytes from oobfree->offset till end of OOB are free.
CC: <stable@vger.kernel.org> # 3.13.x+
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Pekon Gupta [Mon, 17 Feb 2014 07:41:24 +0000 (13:11 +0530)]
mtd: nand: omap: fix ecclayout->oobfree->offset
1) In current implementation, ecclayout->oobfree->offset is calculated with
respect to ecclayout->eccpos[0] which is incorrect because ECC bytes may not
be stored contiguously in OOB.
So, this patch calculates ecclayout->oobfree->offset with respect to last
ECC byte-position 'eccpos[ecclayout->eccbytes-1]'.
2) ECC layout of some ecc-schemes expects reserved-markers at specific eccpos[]
which should not be over-written by any file-system metadata.
So this patch aligns oobfree->offset taking into account of such markers.
CC: <stable@vger.kernel.org> # 3.13.x+
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Pekon Gupta [Mon, 17 Feb 2014 07:41:23 +0000 (13:11 +0530)]
mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver
Fixes: commit a919e51161b58ed7e6e663daba99ab7d558808f3
mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
Fixes ecclayout mismatch introduced in above commit for following ecc-schemes:
- OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
However, this patch also touches other ecc-schemes as the fix required
refactoring common code, into ecc-scheme specific code.
This patch aligns ecc-layout for below ecc-schemes as per reference [1],[2],[3]
+---+------------+-------------++-------------+-------------+
|OOB|BCH8_CODE_HW|BCH8_CODE_HW_||HAM1_CODE_HW |HAM1_CODE_HW |
|pos| | DETECTION_SW||(x8 device) |(x16 device) |
+---+------------+-------------++-------------+-------------+
| 0 |BADBLK_MARK | BADBLK_MARK || BADBLK_MARK | BADBLK_MARK |
| 1 |BADBLK_MARK | BADBLK_MARK || eccpos[0] | BADBLK_MARK |
| 2 | eccpos[0] | eccpos[0] || eccpos[1] | eccpos[0] |
| 3 | eccpos[1] | eccpos[1] || eccpos[2] | eccpos[1] |
| 4 | eccpos[2] | eccpos[2] || eccpos[3] | eccpos[2] |
| 5 | eccpos[3] | eccpos[3] || eccpos[4] | eccpos[3] |
| 6 | eccpos[4] | eccpos[4] || eccpos[5] | eccpos[4] |
| 7 | eccpos[5] | eccpos[5] || eccpos[6] | eccpos[5] |
| 8 | eccpos[6] | eccpos[6] || eccpos[7] | eccpos[6] |
| 9 | eccpos[7] | eccpos[7] || eccpos[8] | eccpos[7] |
|10 | eccpos[8] | eccpos[8] || eccpos[9] | eccpos[8] |
|11 | eccpos[9] | eccpos[9] || eccpos[10] | eccpos[9] |
|12 | eccpos[10] | eccpos[10] || eccpos[11] | eccpos[10] |
|13 | eccpos[11] | eccpos[11] || oobfree[0] | eccpos[11] |
|14 | eccpos[12] | eccpos[12] || oobfree[1] | oobfree[0] |
|15 | eccpos[13] | <reserved> || oobfree[2] | oobfree[1] |
+---+------------+-------------++-------------+-------------+
|16 | eccpos[14] | eccpos[13] || oobfree[3] | oobfree[2] |
|...| [...] | [...] || [...] | [...] |
|56 | eccpos[54] | eccpos[51] || oobfree[43] | oobfree[42] |
|57 | eccpos[55] | <reserved> || oobfree[44] | oobfree[43] |
+===+============+=============+==============+=============+
|58 | oobfree[0] | oobfree[0] || oobfree[45] | oobfree[44] |
|59 | oobfree[1] | oobfree[1] || oobfree[46] | oobfree[45] |
|60 | oobfree[2] | oobfree[2] || oobfree[47] | oobfree[46] |
|61 | oobfree[3] | oobfree[3] || oobfree[48] | oobfree[47] |
|62 | oobfree[4] | oobfree[4] || oobfree[49] | oobfree[48] |
|63 | oobfree[5] | oobfree[5] || oobfree[50] | oobfree[49] |
+---+------------+-------------+--------------+-------------+
[1] ecc-layout expected by ROM code, as specified in SoC TRM under:
Chapter="Initialization"
Section="Device Initialization by ROM code"
Sub-Section="Memory Booting"
Heading="NAND"
Figure="ECC Locations in NAND Spare Areas"
[2] ecc-layout updates in u-boot
http://lists.denx.de/pipermail/u-boot/2013-November/167551.html
[3] u-boot configurations to match above ecc-layout are documented at
https://processors.wiki.ti.com/index.php/Linux_Core_NAND_User%27s_Guide
CC: <stable@vger.kernel.org> # 3.13.x+
Reported-by: Enric Balletbo Serra <eballetbo@iseebcn.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Linus Torvalds [Sun, 23 Feb 2014 22:17:08 +0000 (14:17 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Serialize the registration of a new sched_clock in the currently ARM
only generic sched_clock facilty to avoid sched_clock havoc"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched_clock: Prevent callers from seeing half-updated data
Linus Torvalds [Sun, 23 Feb 2014 22:15:46 +0000 (14:15 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- a bugfix which prevents a divide by 0 panic when the newly introduced
try_msr_calibrate_tsc() fails
- enablement of the Baytrail platform to utilize the newfangled msr
based calibration
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: tsc: Add missing Baytrail frequency to the table
x86, tsc: Fallback to normal calibration if fast MSR calibration fails
Linus Torvalds [Sun, 23 Feb 2014 22:15:08 +0000 (14:15 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Another four fixlets to tame the ARM orion irq chip"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: orion: Fix getting generic chip pointer.
irqchip: orion: clear stale interrupts in irq_startup
irqchip: orion: use handle_edge_irq on bridge irqs
irqchip: orion: clear bridge cause register on init
Linus Torvalds [Sun, 23 Feb 2014 18:40:22 +0000 (10:40 -0800)]
Merge tag 'usb-3.14-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for reported issues for 3.14-rc4
The majority of these are for USB gadget, phy, and musb driver issues.
And there's a few new device ids thrown in for good measure"
* tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: need to mask when writting endptflush and endptprime
usb: musb: correct use of schedule_delayed_work()
usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
usb: gadget: fix NULL pointer dereference
usb: gadget: printer: using gadget_is_otg to check otg support at runtime
phy: let phy_provider_register be the last step in registering PHY
phy-core: Don't allow building phy-core as a module
phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller
phy-core: phy_get: Leave error logging to the caller
phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM
usb: musb: correct use of schedule_delayed_work()
usb: musb: do not sleep in atomic context
USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8
USB: EHCI: add delay during suspend to prevent erroneous wakeups
usb: gadget: bcm63xx_udc: fix build failure on DMA channel code
usb: musb: do not sleep in atomic context
usb: gadget: s3c2410_udc: Fix build error
usb: musb: core: Fix remote-wakeup resume
usb: musb: host: Fix SuperSpeed hub enumeration
usb: musb: fix obex in g_nokia.ko causing kernel panic
Linus Torvalds [Sun, 23 Feb 2014 18:39:50 +0000 (10:39 -0800)]
Merge tag 'tty-3.14-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull TTY revert from Greg KH:
"Here is a single commit, a revert of a sysfs file change that ended up
breaking a userspace tool"
* tag 'tty-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: Set correct tty name in 'active' sysfs attribute"
Linus Torvalds [Sun, 23 Feb 2014 18:39:21 +0000 (10:39 -0800)]
Merge tag 'staging-3.14-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging tree fix from Greg KH:
"Here is a single android driver fix for 3.14-rc4 that fixes a reported
problem in the binder driver"
* tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: binder: Fix death notifications
Linus Torvalds [Sun, 23 Feb 2014 18:38:51 +0000 (10:38 -0800)]
Merge tag 'char-misc-3.14-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single commit, to fix a reported problem in the mei driver"
* tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: set client's read_cb to NULL when flow control fails
Paul E. McKenney [Tue, 11 Feb 2014 20:16:14 +0000 (12:16 -0800)]
rcutorture: Save kvm.sh output to log
This commit logs the progress text that kvm.sh outputs, improving
after-the-fact troubleshooting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Tue, 11 Feb 2014 16:05:07 +0000 (08:05 -0800)]
rcutorture: Add a lock_busted to test the test
This commit adds a maximally broken locking primitive in which
lock acquisition and release are both no-ops.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Tue, 11 Feb 2014 03:59:05 +0000 (19:59 -0800)]
rcutorture: Place kvm-test-1-run.sh output into res directory
The output of each kvm-test-1-run.sh script is placed into a file
whose name parallels that of the build directory. This means that
the kvm-test-1-run.sh output is overwritten by later run. This
commit therefore places the kvm-test-1-run.sh output into the
per-test-case directory in the "res" hierarchy.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul Bolle [Sun, 9 Feb 2014 02:06:57 +0000 (18:06 -0800)]
rcutorture: Rename TREE_RCU-Kconfig.txt
It used to be that:
git ls-files "*Kconfig*"
would find all Kconfig files and would only find Kconfig files. This
commit renames TREE_RCU-Kconfig.txt to TREE_RCU-kconfig.txt so that this
is once again true.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 7 Feb 2014 23:47:12 +0000 (15:47 -0800)]
locktorture: Add kvm-recheck.sh plug-in for locktorture
This commit adds the kvm-recheck-lock.sh plug-in for locktorture to
print out lock-specific progress statistics.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 7 Feb 2014 22:42:51 +0000 (14:42 -0800)]
rcutorture: Gracefully handle NULL cleanup hooks
Although most torture tests will have some cleanup hook, it is possible
that one might not. This commit therefore enables graceful handling of
a NULL cleanup hook during torture-test shutdown.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 7 Feb 2014 21:56:37 +0000 (13:56 -0800)]
locktorture: Add vestigial locktorture configuration
This commit adds a trivial set of configuration files for lock
torturing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 7 Feb 2014 18:29:49 +0000 (10:29 -0800)]
rcutorture: Introduce "rcu" directory level underneath configs
This commit uses the standard software ploy of introducing another
level of indirection below the configs directory. This allows each
torture-test suite to have its own set of Kconfig files, boot parameters,
and version-specific scripts. Initially, we have only rcu, but lock
will follow soonish.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 7 Feb 2014 04:35:41 +0000 (20:35 -0800)]
rcutorture: Rename kvm-test-1-rcu.sh
The kvm-test-1-rcu.sh is not specific to RCU, so this commit renames it
to kvm-test-1-run.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 7 Feb 2014 01:50:32 +0000 (17:50 -0800)]
rcutorture: Remove RCU dependencies from ver_functions.sh API
The current set of functions in ver_functions.sh have APIs that are
specific to RCU. This commit therefore makes an RCU-independent function
that outputs version-specific boot arguments. This has the benefit that
a test-type-independent call in kvm-test-1-rcu.sh can now handle any type
of test, given a test-type-specific set of files in a configs directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Thu, 6 Feb 2014 19:54:32 +0000 (11:54 -0800)]
rcutorture: Create CFcommon file for common Kconfig parameters
Currently, CONFIG_RCU_TORTURE_TEST=y is hardcoded into the
kvm-test-1-rcu.sh script and CONFIG_PRINTK_TIME=y is mentioned in each
and every configs file. This commit creates a CFcommon file for these
two Kconfig parameters, and modifies kvm-test-1-rcu.sh to copy this new
file into the .config file during the build. This change will allow
these scripts to operate on torture types other than just rcutorture.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Thu, 6 Feb 2014 17:02:51 +0000 (09:02 -0800)]
rcutorture: Create config files for scripted test-the-test testing
This commit adds a pair of files in the configs directory to allow
test-the-test runs of rcutorture via a "--configs BUSTED" argument to
the kvm.sh script.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Thu, 6 Feb 2014 16:45:56 +0000 (08:45 -0800)]
rcutorture: Add an rcu_busted to test the test
This commit adds a deliberately buggy RCU implementation into rcutorture
to allow easy checking that rcutorture correctly flags buggy RCU
implementations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Tue, 4 Feb 2014 23:51:41 +0000 (15:51 -0800)]
locktorture: Add a lock-torture kernel module
This commit adds the locking counterpart to rcutorture.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Make n_lock_torture_errors and torture_spinlock static
as suggested by Fengguang Wu. ]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 7 Feb 2014 23:16:25 +0000 (15:16 -0800)]
rcutorture: Abstract kvm-recheck.sh
This commit creates a plug-in to allow kvm-recheck.sh to process
non-rcutorture console output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Tue, 4 Feb 2014 20:35:27 +0000 (12:35 -0800)]
rcutorture: Stop generic kthreads in torture_cleanup()
The specific torture modules (like rcutorture) need to call
torture_cleanup() in any case, so this commit makes torture_cleanup()
deal with torture_shutdown_cleanup() and torture_stutter_cleanup() so
that the specific modules don't have to deal with these details.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Tue, 4 Feb 2014 19:47:08 +0000 (11:47 -0800)]
rcutorture: Abstract torture_stop_kthread()
Stopping of kthreads is not RCU-specific, so this commit abstracts
out torture_stop_kthread(), saving a few lines of code in the process.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Mon, 3 Feb 2014 19:52:27 +0000 (11:52 -0800)]
rcutorture: Abstract torture_create_kthread()
Creation of kthreads is not RCU-specific, so this commit abstracts
out torture_create_kthread(), saving a few tens of lines of code in
the process.
This change requires modifying VERBOSE_TOROUT_ERRSTRING() to take a
non-const string, so that _torture_create_kthread() can avoid an
open-coded substitute.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Mon, 3 Feb 2014 18:02:41 +0000 (10:02 -0800)]
rcutorture: Fix missing-return bug in rcu_torture_barrier_init()
This commit adds a missing error return to the code path that creates
the rcu_torture_barrier() kthread.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Sat, 1 Feb 2014 01:37:28 +0000 (17:37 -0800)]
rcutorture: Fix rcutorture shutdown races
Not all of the rcutorture kthreads waited for kthread_should_stop()
before returning from their top-level functions, and none of them
used torture_shutdown_absorb() properly. These problems can result in
segfaults and hangs at shutdown time, and some recent changes perturbed
timing sufficiently to make them much more probable. This commit
therefore creates a torture_kthread_stopping() function that does the
proper kthread shutdown dance in one centralized location.
Accommodate this grouping by making VERBOSE_TOROUT_STRING() capable of
taking a non-const string as its argument, which allows the new
torture_kthread_stopping() to pass its "title" argument directly to
the updated version of VERBOSE_TOROUT_STRING().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Fri, 31 Jan 2014 23:39:52 +0000 (15:39 -0800)]
rcutorture: Announce task creation
A few "stealth-start rcutorture kthreads" have accumulated over the years,
so this commit adds console-log announcements (but only if the torture
tests are running verbose).
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 31 Jan 2014 23:15:02 +0000 (15:15 -0800)]
rcutorture: Clean up rcu_torture_init() error checking
This commit applies some simple cleanups to rcu_torture_init() error
checking.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 31 Jan 2014 22:52:13 +0000 (14:52 -0800)]
rcutorture: Abstract torture_shutdown()
Because auto-shutdown of torture testing is not specific to RCU,
this commit moves the auto-shutdown function to kernel/torture.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 31 Jan 2014 20:58:39 +0000 (12:58 -0800)]
rcutorture: Apply ACCESS_ONCE() to racy fullstop accesses
Because the fullstop variable can be accessed while it is being updated,
this commit avoids any resulting compiler mischief through use of
ACCESS_ONCE() for non-initialization accesses to this shared variable.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 31 Jan 2014 19:57:43 +0000 (11:57 -0800)]
rcutorture: Abstract stutter_wait()
Because stuttering the test load (stopping and restarting it) is useful
for non-RCU testing, this commit moves the load-stuttering functionality
to kernel/torture.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Fri, 31 Jan 2014 01:06:30 +0000 (17:06 -0800)]
rcutorture: Add diagnostic for unscheduled system shutdown
Currently, rcutorture can terminate via rmmod, via self-shutdown,
via something else shutting the system down, or of course the usual
catastrophic termination. The first two get flagged, so this commit adds
a message for the third. For the fourth, your warranty is void as always.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Thu, 30 Jan 2014 23:49:29 +0000 (15:49 -0800)]
rcutorture: Privatize fullstop
This commit introduces the torture_must_stop() function in order to
keep use of the fullstop variable local to kernel/torture.c. There
is also a torture_must_stop_irq() counterpart for use from RCU callbacks,
timeout handlers, and the like.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Thu, 30 Jan 2014 23:37:19 +0000 (15:37 -0800)]
rcutorture: Abstract torture_shutdown_notify()
Because handling the race between rmmod and system shutdown is not
specific to RCU, this commit abstracts torture_shutdown_notify(),
placing this code into kernel/torture.c. This change also allows
fullstop_mutex to be private to kernel/torture.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Thu, 30 Jan 2014 23:29:29 +0000 (15:29 -0800)]
rcutorture: Print dates when doing parallel rcutorture runs
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Thu, 30 Jan 2014 22:21:11 +0000 (14:21 -0800)]
rcutorture: Abstract torture-test cleanup
This commit creates a torture_cleanup() that handles the generic
cleanup actions local to kernel/torture.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Thu, 30 Jan 2014 21:38:09 +0000 (13:38 -0800)]
rcutorture: Abstract torture-test initialization
This commit creates torture_init_begin() and torture_init_end() functions
to abstract locking and allow the torture_type and verbose variables
in kernel/torture.o to become static. With a bit more abstraction,
fullstop_mutex will also become static.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Tue, 28 Jan 2014 23:58:22 +0000 (15:58 -0800)]
rcutorture: Abstract torture_onoff()
Because online/offline torturing is not specific to RCU, this commit
abstracts it into the kernel/torture.c module to allow other torture
tests to use it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Tue, 28 Jan 2014 23:29:21 +0000 (15:29 -0800)]
rcutorture: Abstract torture_shuffle()
The torture_shuffle() function forces each CPU in turn to go idle
periodically in order to check for problems interacting with per-CPU
variables and with dyntick-idle mode. Because this sort of debugging
is not specific to RCU, this commit abstracts that functionality.
This in turn requires abstracting some additional infrastructure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Wed, 29 Jan 2014 15:40:27 +0000 (07:40 -0800)]
rcutorture: Abstract torture_shutdown_absorb()
Because handling races between rmmod and normal shutdown is not specific
to rcutorture, this commit renames rcutorture_shutdown_absorb() to
torture_shutdown_absorb() and pulls it out into then kernel/torture.c
module. This implies pulling the fullstop mechanism into kernel/torture.c
as well.
The exporting of fullstop and fullstop_mutex is ugly and must die.
And it does in fact die in later commits that introduce higher-level
APIs that encapsulate both of these variables.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>`
Paul E. McKenney [Wed, 29 Jan 2014 15:30:50 +0000 (07:30 -0800)]
rcutorture: Abstract TOROUT_STRING() and friends
These diagnostic macros are not confined to torturing RCU, so this commit
makes them available to other torture tests. Also removed the do-while
from TOROUT_STRING() in response to checkpatch complaints.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Wed, 29 Jan 2014 15:25:25 +0000 (07:25 -0800)]
rcutorture: Rename PRINTK to TOROUT
Since it doesn't do printk()s anymore anyway, this commit renames these
macros from PRINTK to TOROUT (short for torture output).
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Paul E. McKenney [Tue, 28 Jan 2014 00:27:00 +0000 (16:27 -0800)]
rcutorture: Abstract torture_param()
Create a torture_param() macro and apply it to rcutorture in order to
save a few lines of code. This same macro may be applied to other
torture frameworks.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Mon, 27 Jan 2014 20:31:20 +0000 (12:31 -0800)]
rcutorture: Don't create results directory for dryruns
This commit prevents the results directory from being created for
dryruns. However, a script generated from a dryrun will create
the results directory should it be run.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org
Paul E. McKenney [Mon, 27 Jan 2014 19:49:39 +0000 (11:49 -0800)]
rcutorture: Abstract rcu_torture_random()
Because rcu_torture_random() will be used by the locking equivalent to
rcutorture, pull it out into its own module. This new module cannot
be separately configured, instead, use the Kconfig "select" statement
from the Kconfig options of tests depending on it.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Mon, 17 Feb 2014 21:13:05 +0000 (13:13 -0800)]
rcutorture: Fix checkpatch complaint
This commit does a code-style cleanup so that the first curly brace
of an initializer does not appear at the beginning of a line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Matt Porter [Fri, 14 Feb 2014 15:15:03 +0000 (10:15 -0500)]
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
Add myself as an additional maintainer for the Broadcom mobile
SoCs.
Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Christian Daudt <bcm@fixthebug.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Mark Brown [Sun, 23 Feb 2014 03:22:18 +0000 (12:22 +0900)]
Merge remote-tracking branches 'regulator/fix/da9063', 'regulator/fix/max14577' and 'regulator/fix/s5m8767' into regulator-linus
Mark Brown [Sun, 23 Feb 2014 03:22:18 +0000 (12:22 +0900)]
Merge remote-tracking branch 'regulator/fix/core' into regulator-linus
Greg Kroah-Hartman [Sat, 22 Feb 2014 22:31:04 +0000 (14:31 -0800)]
Revert "tty: Set correct tty name in 'active' sysfs attribute"
This reverts commit
d8a5dc3033af2fd6d16030d2ee4fbd073460fe54.
This breaks plymouth installs, either because plymouth is using the file
"incorrectly" or because the patch is incorrect. Either way, this needs
to be reverted until it is all figured out.
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Reported-by: Ray Strode <halfline@gmail.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Werner Fink <werner@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 22 Feb 2014 20:12:50 +0000 (12:12 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixlets: a fair number of them resulting from the new
SCHED_DEADLINE code"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Remove useless dl_nr_total
sched/deadline: Test for CPU's presence explicitly
sched: Add 'flags' argument to sched_{set,get}attr() syscalls
sched: Fix information leak in sys_sched_getattr()
sched,numa: add cond_resched to task_numa_work
sched/core: Make dl_b->lock IRQ safe
sched/core: Fix sched_rt_global_validate
sched/deadline: Fix overflow to handle period==0 and deadline!=0
sched/deadline: Fix bad accounting of nr_running
Linus Torvalds [Sat, 22 Feb 2014 20:11:54 +0000 (12:11 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixlets from all around the place"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table
perf/x86: Correctly use FEATURE_PDCM
perf, nmi: Fix unknown NMI warning
perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches
perf trace: Add fallback definition of EFD_SEMAPHORE
perf list: Fix checking for supported events on older kernels
perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properly
perf probe: Do not add offset twice to uprobe address
perf/x86: Fix Userspace RDPMC switch
perf/x86/intel/p6: Add userspace RDPMC quirk for PPro
Linus Torvalds [Sat, 22 Feb 2014 16:29:25 +0000 (08:29 -0800)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix writing the minimum temperature in max1668 driver"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Fix writing the minimum temperature
Linus Torvalds [Sat, 22 Feb 2014 16:26:01 +0000 (08:26 -0800)]
Merge branch 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs
Pull xfs fixes from Dave Chinner:
"This is the first pull request I've had to do for you, so I'm still
sorting things out. The reason I'm sending this and not Ben should be
obvious from the first commit below - SGI has stepped down from the
XFS maintainership role. As such, I'd like to take another
opportunity to thank them for their many years of effort maintaining
XFS and supporting the XFS community that they developed from the
ground up.
So I haven't had time to work things like signed tags into my
workflows yet, so this is just a repo branch I'm asking you to pull
from. And yes, I named the branch -rc4 because I wanted the fixes in
rc4, not because the branch was for merging into -rc3. Probably not
right, either.
Anyway, I should have everything sorted out by the time the next merge
window comes around. If there's anything that you don't like in the
pull req, feel free to flame me unmercifully.
The changes are fixes for recent regressions and important thinkos in
verification code:
- a log vector buffer alignment issue on ia32
- timestamps on truncate got mangled
- primary superblock CRC validation fixes and error message
sanitisation"
* 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: limit superblock corruption errors to actual corruption
xfs: skip verification on initial "guess" superblock read
MAINTAINERS: SGI no longer maintaining XFS
xfs: xfs_sb_read_verify() doesn't flag bad crcs on primary sb
xfs: ensure correct log item buffer alignment
xfs: ensure correct timestamp updates from truncate
Ingo Molnar [Sat, 22 Feb 2014 16:20:46 +0000 (17:20 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Handle PERF_RECORD_HEADER_EVENT_TYPE properly. (Jiri Olsa)
* Fix checking for supported events on older kernels in
'perf list' (Vince Weaver)
* Do not add offset twice to uprobe address in
'perf probe' (Masami Hiramatsu)
* Fix perf trace's ioctl 'request' beautifier build problems
on !(i386 || x86_64) arches (Arnaldo Carvalho de Melo)
* Fix 'perf trace' build by adding a fallback definition for
EFD_SEMAPHORE (Ben Hutchings)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Krzysztof Kozlowski [Fri, 21 Feb 2014 12:12:38 +0000 (13:12 +0100)]
regulator: max14577: Fix invalid return value on DT parse success
This fixes bug introduced in
667a6b7a (regulator: max14577: Add missing
of_node_put). The DTS parsing function returned number of matched
regulators as success status which then was compared against 0 in probe.
Result was a probe fail after successful parsing the DTS:
max14577-regulator: probe of max14577-regulator failed with error 2
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviwed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Thomas Gleixner [Fri, 21 Feb 2014 22:57:33 +0000 (23:57 +0100)]
Merge tag 'irqchip-mvebu-fixes-3.14' of git://git.infradead.org/linux-mvebu into irq/urgent
irqchip mvebu fixes for v3.14
- orion:
- fixes for clearing bridge cause register, and clearing stale interrupts
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus Torvalds [Fri, 21 Feb 2014 22:35:05 +0000 (14:35 -0800)]
Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux
Pull devicetree fixes from Grant Likely:
"Device tree compatible match order bug fix
This branch contains a bug fix for the way devicetree code identifies
the type of device. Device drivers can contain a list of
of_device_ids, but it more than one entry will match, then the device
driver may choose the wrong one. Commit
105353145e, "match each node
compatible against all given matches first", was queued for v3.14 but
ended up causing other bugs. Commit
06b29e76a7 attempted to fix it
but it had other bugs. Merely reverting the fix and waiting until
v3.15 isn't a good option because there is code in v3.14 that depends
on the revised behaviour to boot.
This branch should finally fixes the problem correctly. This time
instead of just hoping that the patch is correct, this branch also
adds new testcases that validate the behaviour.
The changes in this branch are larger than I would like for a -rc
pull, but moving the test case data out of out of arch/arm so that it
could be validated on other architectures was important"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
of: Add self test for of_match_node()
of: Move testcase FDT data into drivers/of
of: reimplement the matching method for __of_match_node()
Revert "of: search the best compatible match first in __of_match_node()"
Linus Torvalds [Fri, 21 Feb 2014 22:34:26 +0000 (14:34 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fix from Wim Van Sebroeck:
"It corrects the error code when no device was found for w83697hf_wdt"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: w83697hf_wdt: return ENODEV if no device was found
Andrew Lunn [Thu, 6 Feb 2014 23:41:58 +0000 (00:41 +0100)]
irqchip: orion: Fix getting generic chip pointer.
Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt
handler. The bridge interrupt is implemented using a single generic
chip. Thus the parameter passed to irq_get_domain_generic_chip()
should always be zero.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Fixes: 9dbd90f17e4f ("irqchip: Add support for Marvell Orion SoCs")
Cc: <stable@vger.kernel.org> # v3.11+
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Stephane Eranian [Wed, 19 Feb 2014 13:10:18 +0000 (14:10 +0100)]
perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table
This patch updates the CBOX PMU filters mapping tables for SNB-EP
and IVT (model 45 and 62 respectively).
The NID umask always comes in addition to another umask.
When set, the NID filter is applied.
The current mapping tables were missing some code/umask
combinations to account for the NID umask. This patch
fixes that.
Cc: mingo@elte.hu
Cc: ak@linux.intel.com
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140219131018.GA24475@quad
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Peter Zijlstra [Mon, 3 Feb 2014 13:29:03 +0000 (14:29 +0100)]
perf/x86: Correctly use FEATURE_PDCM
The current code simply assumes Intel Arch PerfMon v2+ to have
the IA32_PERF_CAPABILITIES MSR; the SDM specifies that we should check
CPUID[1].ECX[15] (aka, FEATURE_PDCM) instead.
This was found by KVM which implements v2+ but didn't provide the
capabilities MSR. Change the code to DTRT; KVM will also implement the
MSR and return 0.
Cc: pbonzini@redhat.com
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140203132903.GI8874@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Markus Metzger [Sat, 15 Feb 2014 00:44:08 +0000 (16:44 -0800)]
perf, nmi: Fix unknown NMI warning
When using BTS on Core i7-4*, I get the below kernel warning.
$ perf record -c 1 -e branches:u ls
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2.
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317920] Do you have a strange power saving mode enabled?
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317945] Dazed and confused, but trying to continue
Make intel_pmu_handle_irq() take the full exit path when returning early.
Cc: eranian@google.com
Cc: peterz@infradead.org
Cc: mingo@kernel.org
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Matthieu CASTET [Wed, 19 Feb 2014 05:46:31 +0000 (13:46 +0800)]
usb: chipidea: need to mask when writting endptflush and endptprime
ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.
Cc: stable <stable@vger.kernel.org> # 3.11+
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.050949 seconds and 5 git commands to generate.