Stephen Hemminger [Wed, 16 Apr 2008 23:37:28 +0000 (16:37 -0700)]
tg3: remove unneeded semicolons
Remove extraneous semicolons after switch and conditional statements.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Randy Dunlap [Fri, 16 May 2008 17:35:24 +0000 (10:35 -0700)]
3c515: fix using pnp_get_resource when CONFIG_ISAPNP=n
3c515.c uses pnp_irq(), which calls pnp_get_resource(),
which is not defined when CONFIG_PNP=n, so in that case,
get the IRQ from a hardware register.
3c515.c:(.text+0x3adc0): undefined reference to `pnp_get_resource'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Maciej W. Rozycki [Sat, 17 May 2008 05:46:19 +0000 (06:46 +0100)]
PHYLIB: Kconfig: Complete the list of Broadcom PHYs supported
Add Broadcom PHYs supported missing from the description.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Nate Case [Sat, 17 May 2008 05:40:39 +0000 (06:40 +0100)]
PHYLIB: Add 1000Base-X support for Broadcom bcm5482
Configure the BCM5482S secondary SerDes for 1000Base-X mode when the
appropriate dev_flags are passed in to phy_connect(). This is
needed when the PHY is used for fiber and backplane connections.
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jay Vosburgh [Sun, 18 May 2008 04:10:14 +0000 (21:10 -0700)]
bonding: Add "follow" option to fail_over_mac
Add a "follow" selection for fail_over_mac. This option
causes the MAC address to move from slave to slave as the active
slave changes. This is in addition to the existing fail_over_mac option
that causes the bond's MAC address to change during failover.
This new option is useful for devices that cannot tolerate
multiple ports using the same MAC address simultaneously, either
because it confuses them or incurs a performance penalty (as is the
case with some LPAR-aware multiport devices). Because the MAC of the
bond itself does not change, the "follow" option is slightly more
reliable during failover and doesn't change the MAC of the bond during
operation.
This patch requires a previous ARP monitor change to properly
handle RTNL during failovers.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jay Vosburgh [Sun, 18 May 2008 04:10:13 +0000 (21:10 -0700)]
bonding: refactor ARP active-backup monitor
Refactor ARP monitor for active-backup mode. The motivation for
this is to take care of locking issues in a clear manner (particularly to
correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP
monitor does not hold RTNL at all, but future changes will require RTNL
during ARP monitor failovers.
Rather than using conditional locking, this patch instead breaks
up the ARP monitor into three discrete steps: inspection, commit changes,
and probe. The inspection phase marks slaves that require link state
changes. The commit phase is only called if inspection detects that
changes are needed, and is called with RTNL. Lastly, the probe phase
issues the ARP probes that the inspection phase uses to determine link
state.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Moni Shoua [Sun, 18 May 2008 04:10:12 +0000 (21:10 -0700)]
bonding: Send more than one gratuitous ARP when slave takes over
With IPoIB, reception of gratuitous ARP by neighboring hosts
is essential for a successful change of slaves in case of failure.
Otherwise, they won't learn about the HW address change and need
to wait a long time until the neighboring system gives up and sends
an ARP request to learn the new HW address. This patch decreases
the chance for a lost of a gratuitous ARP packet by sending it more
than once. The number retries is configurable and can be set with a
module param.
Signed-off-by: Moni Shoua <monis@voltaire.com>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Pavel Emelyanov [Sun, 18 May 2008 04:10:11 +0000 (21:10 -0700)]
bonding: Remove unneeded list_empty checks.
Some places iterate over the checked list right after the check
itself, so even if the list is empty, the list_for_each_xxx
iterator will make everything right by himself.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Pavel Emelyanov [Sun, 18 May 2008 04:10:10 +0000 (21:10 -0700)]
bonding: Relax unneeded _safe lists iterations.
Many places either do not modify the list under the list_for_each_xxx,
or break out of the loop as soon as the first element is removed.
Thus, this _safe iteration just occupies some unneeded .text space
and requires an additional variable.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Pavel Emelyanov [Sun, 18 May 2008 04:10:09 +0000 (21:10 -0700)]
bonding: Remove redundant argument from bond_create.
While we're fixing the bond_create, I hope it's OK to polish it
a bit after the fixes.
The third argument is NULL at the first caller and is ignored by
the second one, so remove it.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jay Vosburgh [Sun, 18 May 2008 04:10:08 +0000 (21:10 -0700)]
bonding: remove test for IP in ARP monitor
Remove bond_has_ip and all references to it. With this change,
the ARP monitor will always send ARP probes if the master is up and has
at least one slave. If the bond has an IP address, it is used in the
ARP probe; if not, the probes are sent with all zeros in the sender's
IP address (which is consistent with an RFC 2131 4.4.1 duplicate address
probe).
This is useful for cases when bonding itself is hidden underneath
a layer of virtual devices, e.g., with Xen.
Change suggested by Tsutomu Fujii <t-fujii@nb.jp.nec.com>, who
included a one-line patch that only affected active-backup mode.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jay Vosburgh [Sun, 18 May 2008 04:10:07 +0000 (21:10 -0700)]
bonding: Use msecs_to_jiffies, eliminate panic
Convert bonding to use msecs_to_jiffies instead of doing the
math. For the ARP monitor, there was an underflow problem that could
result in an infinite loop. The miimon already had that worked around,
but this is cleaner.
Originally by Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Jay Vosburgh corrected a math error in the original; Nicolas' original
commit message is:
When setting arp_interval parameter to a very low value, delta_in_ticks
for next arp might become 0, causing an infinite loop.
See http://bugzilla.kernel.org/show_bug.cgi?id=10680
Same problem for miimon parameter already fixed, but fix might be
enhanced, by using msecs_to_jiffies() function.
Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Al Viro [Wed, 21 May 2008 00:34:30 +0000 (01:34 +0100)]
misc drivers/net endianness noise
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Divy Le Ray [Thu, 22 May 2008 01:56:26 +0000 (18:56 -0700)]
cxgb3 - Add LRO support
Add LRO support.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Divy Le Ray [Thu, 22 May 2008 01:56:21 +0000 (18:56 -0700)]
cxgb3 - Add page support to jumbo frame Rx queue
Add page support to Jumbo frame Rx queues.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Divy Le Ray [Thu, 22 May 2008 01:56:16 +0000 (18:56 -0700)]
cxgb3 - Fix dma mapping error path
Take potential dma mapping errors in account.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Allan Stephens [Wed, 21 May 2008 21:55:04 +0000 (14:55 -0700)]
tipc: Fix initialization sequence problems when entering network mode
This patch ensures that TIPC's topology service and configuration
service are shut down before switching into "network mode". This
ensures that TIPC does not mistakenly try to send unnecessary
"publication withdraw" messages to other nodes before it is fully
initialized for sending off-node messages. Note that the node's
current network address is now updated only after the two services
are shut down; this ensures that any existing connections to the
topology server are terminated correctly using the old address.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Wed, 21 May 2008 21:54:12 +0000 (14:54 -0700)]
tipc: Update "previous node" indicators when node address changes
This patch ensures that the "previous node" field in any existing
TIPC port message header templates is updated properly when a TIPC
network address is assigned to the node. (Previously, only the
"originating node" field was updated.)
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Wed, 21 May 2008 21:53:34 +0000 (14:53 -0700)]
tipc: Optimize null pointer check during neighbor discovery
This patch optimizes TIPC neighbor discovery code to avoid testing for
a null node pointer when the pointer is already known to be non-null.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Wed, 21 May 2008 21:53:00 +0000 (14:53 -0700)]
tipc: Prevent node object duplication due to simultaneous discovery
This patch ensures that the simultaneous discovery of the same
neighboring node by multiple interfaces does not cause TIPC to add
the node into its internal data structures more than once.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Wed, 21 May 2008 21:52:30 +0000 (14:52 -0700)]
tipc: Fix skb_under_panic when configuring TIPC without privileges
This patch prevents a TIPC configuration command requiring network
administrator privileges from triggering an skbuff underrun if it
is issued by a process lacking those privileges. The revised error
handling code avoids the use of a potentially uninitialized global
variable by transforming the unauthorized command into a new command,
then following the standard command processing path to generate the
required error message.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 21 May 2008 21:17:54 +0000 (14:17 -0700)]
ip6mr: Use on-device stats instead of private ones.
Similar to ipmr.
[ Fix build failures -DaveM ]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 21 May 2008 21:17:33 +0000 (14:17 -0700)]
ipmr: Use on-device stats instead of private ones.
These devices use the private area of appropriate size for
statistics. Turning them to use on-device ones make them
"privless" and thus - really small wrt kmalloc cache, they
are allocated from.
Besides, code looks nicer, because of absence of multi-braced
type casts and dereferences.
[ Fix build failures -DaveM ]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 21 May 2008 21:17:05 +0000 (14:17 -0700)]
ip6tnl: Use on-device stats instead of private ones.
This tunnel uses its own private structure and requires separate
patch to switch from private stats to on-device ones.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 21 May 2008 21:16:36 +0000 (14:16 -0700)]
tunnels: Remove stat member from ip_tunnel struct.
All users already use on-device statistics, so this field can be
safely removed.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 21 May 2008 21:16:14 +0000 (14:16 -0700)]
ipmr: Ipip tunnel uses on-device stats.
The ipmr uses ipip tunnels for its purposes and updates the
tunnels' stats, but the ipip driver is already switched to
use on-device ones.
Actually, this is a part of the patch #4 from this set.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 21 May 2008 21:15:46 +0000 (14:15 -0700)]
sit: Use on-device stats instead of private ones.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 21 May 2008 21:15:16 +0000 (14:15 -0700)]
ipip: Use on-device stats instead of private ones.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 21 May 2008 21:14:22 +0000 (14:14 -0700)]
ipgre: Use on-device stats instead of private ones.
Just switch from tunnel->stat to tunnel->dev->stats. The ip_tunnel->stat
member itself will be removed after I fix its other users (very soon).
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 21 May 2008 21:13:47 +0000 (14:13 -0700)]
bridge: Use on-device stats instead of private ones.
Even though bridges require 6 fields from struct net_device_stats,
the on-device stats are always there, so we may just use them.
The br_dev_get_stats is no longer required after this.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 21 May 2008 21:12:46 +0000 (14:12 -0700)]
net: The dev->get_stats pointer is not NULL nowadays.
And so does the pointer is returns, but sysfs and netlinks still
check for both cases.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Mon, 19 May 2008 20:53:30 +0000 (13:53 -0700)]
ipv6: Register some net/ipv6/ core sysctls at read-only root.
There are some sysctls left to be switched to read-only,
but they are all in ipv6, so complete with them.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Mon, 19 May 2008 20:53:02 +0000 (13:53 -0700)]
inet: Register fragmentation some ctls at read-only root.
Parts of fragments-related sysctls are read-only, but this is
done by cloning all the tables and dropping write-bits from
mode. Do the same but with read-only root.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Mon, 19 May 2008 20:52:28 +0000 (13:52 -0700)]
ipv6: In fragmentation code, handle error returned from register_pernet_subsys.
The error code is ignored now, but ipv6 is a module and one can
be loaded under memory pressure, so the error may occur (in theory).
Besides, I'm going to handle error returned from registering a
read-only part of the table, so ignoring this one, while handing
the other one would look strange.
(However, this possibility of error is rather small, so I'm not
sure whether this is a candidate for current net tree).
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Mon, 19 May 2008 20:51:29 +0000 (13:51 -0700)]
inet: Rename fragmentation sysctl-related functions/variables.
The fragments sysctls also contains some, that are to be
visible, but read-only in net namespaces.
The naming in net/core/sysctl_net_core.c is - tables, that are
to be registered in namespaces have a "ns" word in their names.
So rename ones in ipv4/ip_fragment.c and ipv6/reassembly.c to
fit this.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Mon, 19 May 2008 20:49:52 +0000 (13:49 -0700)]
netns: Register net/core/ sysctls at read-only root.
Most of the net/core/xxx sysctls are read-only now, but this
goal is achieved with excessive memory consumption in each
namespace - the whole table is cloned and most of the entries
in it are ~= 0222.
Split it into two parts and register (the largest) one at the
read-only root.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Mon, 19 May 2008 20:45:33 +0000 (13:45 -0700)]
netns: Introduce sysctl root for read-only net sysctls.
This one stores all ctl-heads in one list and restricts the
permissions not give write access to non-init net namespaces.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Mon, 19 May 2008 20:30:13 +0000 (13:30 -0700)]
tipc: Cosmetic cleanup of topology service code
This patch contains a set of cosmetic changes to TIPC's network
topology service subsystem, including:
- updates to comments (including copyright dates)
- re-ordering structure fields to group them more logically
- removal of optional debugging code that is no longer required
- minor changes to whitespace to conform to Linux coding conventions
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Mon, 19 May 2008 20:29:47 +0000 (13:29 -0700)]
tipc: Consolidate subscriber & subscriber port references
This patch modifies TIPC's network topology service so that it
only requires a single reference table entry per subscriber
connection, rather than two. This is achieved by letting the
reference to the server port communicating with the subscriber
act as the reference to the subscriber object itself. (Since
the subscriber cannot exist without its port, and vice versa,
this dual role for the reference is perfectly natural.) This
consolidation reduces the size of the reference table by 50%
in the default configuration.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Mon, 19 May 2008 20:29:06 +0000 (13:29 -0700)]
tipc: Fix bug in topology server byte swapping routine
This patch fixes TIPC's topology server so that it does byte swapping
correctly when endianness conversion is required. (Note: This bug only
impacted an application if it issues a subscription request to a
topology server on another node, rather than the server on it's own
node; since the topology server is normally not accessible by off-node
applications, most TIPC applications were not impacted by the bug.)
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Mon, 19 May 2008 20:28:32 +0000 (13:28 -0700)]
tipc: Add support for customized subscription endianness
This patch enables TIPC's topology server code to do customized
endianness conversions on a per-subscription basis. (This
capability is needed to support the upcoming consolidation of
subscriber and subscription object references.)
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Mon, 19 May 2008 20:27:31 +0000 (13:27 -0700)]
tipc: Add support for customized subscription overlap handling
This patch enables TIPC's topology server code to do customized
overlap detection handling on a per-subscription basis. (This
capability is needed to support the upcoming introduction of
multi-cluster TIPC networks.)
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 17 May 2008 05:20:59 +0000 (22:20 -0700)]
bnx2: Update version to 1.7.6.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Li [Sat, 17 May 2008 05:20:27 +0000 (22:20 -0700)]
bnx2: Pre-initialize struct cpu_reg.
Instead of assigning values for the struct cpu_reg's at runtime,
we already know these values at compile time. Therefore, we can use
designated initializers, to initialize these structures and not have
to incur this assignment cost at run-time.
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Li [Sat, 17 May 2008 05:19:35 +0000 (22:19 -0700)]
bnx2: Rename RX_COPY_THRESH to BNX2_RX_COPY_THRESH.
To make the bnx2 code more consistent, all instances of
RX_COPY_THRESH have been changed to BNX2_RX_COPY_THRESH.
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Li [Sat, 17 May 2008 05:18:57 +0000 (22:18 -0700)]
bnx2: Remove the rx_offset field from the bnx2 structure.
The rx_offset field is set to a constant value and initialized
only once. By replacing all references to the rx_offset field,
we can eliminate rx_offset from the bnx2 structure. This will
save 4 bytes for every bnx2 instance.
[Added parentheses to the definition of BNX2_RX_OFFSET, as noted
by Ben Hutchings.]
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wendy Xiong [Sat, 17 May 2008 05:18:21 +0000 (22:18 -0700)]
bnx2: Add EEH PCI recovery.
Add PCI recovery functions to the driver. The initial pci state is
also saved so the the MSI state can be restored during PCI recovery.
Signed-off-by: Wendy Xiong <wendyx@us.ibm.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 17 May 2008 05:17:45 +0000 (22:17 -0700)]
bnx2: Allow phy reset to be skipped during chip reset.
Andy Gospodarek <andy@greyhouse.net> found that netconsole would
panic when resetting bnx2 devices.
>From Andy:
"The issue is the bnx2_set_link in bnx2_init_nic will print a link-status
message before we are fully initialized and ready to start polling.
Polling is currently disabled in this state, but since the
__LINK_STATE_RX_SCHED is overloaded to not only try and disable polling
but also to make the system aware there is something waiting to be
polled, we really have to fix this in drivers.
The problematic call is the one to netif_rx_complete as it tries to
remove an entry from the poll_list when there isn't one."
While this netconsole problem should be fixed separately, we really
should not reset the PHY when changing ring sizes, MTU, or other
similar settings. The PHY reset causes several seconds of unnecessary
link disruptions.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 15 May 2008 07:52:37 +0000 (00:52 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6
David S. Miller [Thu, 15 May 2008 07:34:44 +0000 (00:34 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/wireless/iwlwifi/iwl-4965-rs.c
drivers/net/wireless/rt2x00/rt61pci.c
Marcin Slusarz [Thu, 15 May 2008 06:30:06 +0000 (23:30 -0700)]
isdn/capi: Return proper errnos on module init.
cdebug_init() is called from kcapi_init() which is module
initialization function, so it must return negative values on errors.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alan Cox [Thu, 15 May 2008 06:28:47 +0000 (23:28 -0700)]
iphase: Fix 64bit warning.
Time is unsigned long (except when you are in a hurry) so we need to
store rx_tmp_jif in the right sized object.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Morton [Thu, 15 May 2008 06:27:18 +0000 (23:27 -0700)]
hysdn: No longer broken on SMP.
With the cli/sti code sorted out we think this driver is OK for use on
SMP systems.
Acked-by: Mark Asselstine <mark.asselstine@windriver.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Asselstine [Thu, 15 May 2008 06:25:33 +0000 (23:25 -0700)]
hysdn: Remove cli()/sti() calls.
The use of cli()/sti() within the do/while was a way to ensure
interrupts were only disabled for short periods of time while the bulk
of the time interrupts were free to occur. The use of the spin lock
has eliminated the need to play with interrupts in this way while
still allowing for IO to be protected.
The remaining 3 sti() calls seem unneeded now that at no other point
in the driver is there a call to cli().
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Frysinger [Thu, 15 May 2008 06:24:09 +0000 (23:24 -0700)]
atm: Cleanup atm_tcp.h and atm.h for userspace.
The atm_tcp.h uses types from linux/atm.h, but does not include it.
It should also use the standard __u## types from linux/types.h rather
than the uint##_t types since the former can be found with the kernel
already.
Same goes for linux/atm.h. The linux/socket.h include there also gets
dropped as atm.h does not actually use anything from socket.h.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Thu, 15 May 2008 05:35:04 +0000 (22:35 -0700)]
bonding: handle case of device named bonding_master
If device already exists named bonding_masters, then fail. This is a wierd
corner case only a QA group could love.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Thu, 15 May 2008 05:34:16 +0000 (22:34 -0700)]
sysfs: remove error messages for -EEXIST case
It is possible that the entry in sysfs already exists, one case of this is
when a network device is renamed to bonding_masters. Anyway, in this case
the proper error path is for device_rename to return an error code, not to
generate bogus backtrace and errors.
Also, to avoid possible races, the create link should be done before the
remove link. This makes a device rename atomic operation like other renames.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Thu, 15 May 2008 05:33:38 +0000 (22:33 -0700)]
net: handle errors from device_rename
device_rename can fail with -EEXIST or -ENOMEM, so handle any
problems.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 15 May 2008 02:30:13 +0000 (19:30 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs
* 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: fix error path during early mount
9p: make cryptic unknown error from server less scary
9p: fix flags length in net
9p: Correct fidpool creation failure in p9_client_create
9p: use struct mutex instead of struct semaphore
9p: propagate parse_option changes to client and transports
fs/9p/v9fs.c (v9fs_parse_options): Handle kstrdup and match_strdup failure.
9p: Documentation updates
add match_strlcpy() us it to make v9fs make uname and remotename parsing more robust
Linus Torvalds [Thu, 15 May 2008 02:11:36 +0000 (19:11 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc64: Use a TS_RESTORE_SIGMASK
lmb: Make lmb debugging more useful.
lmb: Fix inconsistent alignment of size argument.
sparc: Fix mremap address range validation.
Andrew Morton [Wed, 14 May 2008 23:05:59 +0000 (16:05 -0700)]
net/irda/irnet/irnet_irda.c needs unaligned.h
net/irda/irnet/irnet_irda.c: In function 'irnet_discovery_indication':
net/irda/irnet/irnet_irda.c:1676: error: implicit declaration of function 'get_unaligned'
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Wed, 14 May 2008 23:05:58 +0000 (16:05 -0700)]
tty_check_change(): avoid taking tasklist_lock while holding tty->ctrl_lock
May 11 09:42:27 [kernel] [ 1104.496819] rarian-sk-get-c[5630]: segfault at 0 ip
7f478556caf0 sp
7fff8e3fe338 error 4 in libc-2.6.1.so[
7f47854f9000+136000]
May 11 10:59:48 [kernel] [ 2494.165792]
May 11 10:59:48 [kernel] [ 2494.165794] =======================================================
May 11 10:59:48 [kernel] [ 2494.165801] [ INFO: possible circular locking dependency detected ]
May 11 10:59:48 [kernel] [ 2494.165805]
2.6.26-rc1-00007-g91b3a7a #217
May 11 10:59:48 [kernel] [ 2494.165807] -------------------------------------------------------
May 11 10:59:48 [kernel] [ 2494.165809] less/7053 is trying to acquire lock:
May 11 10:59:48 [kernel] [ 2494.165812] (tasklist_lock){..??}, at: [<
ffffffff80232e95>] is_current_pgrp_orphaned+0x15/0x50
May 11 10:59:48 [kernel] [ 2494.165821]
May 11 10:59:48 [kernel] [ 2494.165822] but task is already holding lock:
May 11 10:59:48 [kernel] [ 2494.165824] (&tty->ctrl_lock){....}, at: [<
ffffffff803d5f31>] tty_check_change+0x61/0x110
May 11 10:59:48 [kernel] [ 2494.165831]
May 11 10:59:48 [kernel] [ 2494.165832] which lock already depends on the new lock.
May 11 10:59:48 [kernel] [ 2494.165833]
May 11 10:59:48 [kernel] [ 2494.165835]
May 11 10:59:48 [kernel] [ 2494.165836] the existing dependency chain (in reverse order) is:
May 11 10:59:48 [kernel] [ 2494.165838]
May 11 10:59:48 [kernel] [ 2494.165839] -> #2 (&tty->ctrl_lock){....}:
May 11 10:59:48 [kernel] [ 2494.165843] [<
ffffffff80253796>] __lock_acquire+0xf86/0x1080
May 11 10:59:48 [kernel] [ 2494.165851] [<
ffffffff80253922>] lock_acquire+0x92/0xc0
May 11 10:59:48 [kernel] [ 2494.165858] [<
ffffffff804deee0>] _spin_lock_irqsave+0x40/0x60
May 11 10:59:48 [kernel] [ 2494.165866] [<
ffffffff803d31b5>] __proc_set_tty+0x35/0xe0
May 11 10:59:48 [kernel] [ 2494.165873] [<
ffffffff803d76d4>] tty_ioctl+0xbf4/0xfe0
May 11 10:59:48 [kernel] [ 2494.165880] [<
ffffffff802a05e1>] vfs_ioctl+0x31/0x90
May 11 10:59:48 [kernel] [ 2494.165888] [<
ffffffff802a06b3>] do_vfs_ioctl+0x73/0x2d0
May 11 10:59:48 [kernel] [ 2494.165895] [<
ffffffff802a095a>] sys_ioctl+0x4a/0x80
May 11 10:59:48 [kernel] [ 2494.165902] [<
ffffffff8020b5ab>] system_call_after_swapgs+0x7b/0x80
May 11 10:59:48 [kernel] [ 2494.165910] [<
ffffffffffffffff>] 0xffffffffffffffff
May 11 10:59:48 [kernel] [ 2494.165924]
May 11 10:59:48 [kernel] [ 2494.165925] -> #1 (&sighand->siglock){++..}:
May 11 10:59:48 [kernel] [ 2494.165929] [<
ffffffff80253796>] __lock_acquire+0xf86/0x1080
May 11 10:59:48 [kernel] [ 2494.165936] [<
ffffffff80253922>] lock_acquire+0x92/0xc0
May 11 10:59:48 [kernel] [ 2494.165943] [<
ffffffff804dec1f>] _spin_lock+0x2f/0x40
May 11 10:59:48 [kernel] [ 2494.165951] [<
ffffffff8022d5a3>] copy_process+0x973/0x1210
May 11 10:59:48 [kernel] [ 2494.165959] [<
ffffffff8022df12>] do_fork+0x82/0x2f0
May 11 10:59:48 [kernel] [ 2494.165967] [<
ffffffff8020bfe1>] kernel_thread+0x81/0xde
May 11 10:59:48 [kernel] [ 2494.165974] [<
ffffffff8020c048>] child_rip+0xa/0x12
May 11 10:59:48 [kernel] [ 2494.165981] [<
ffffffffffffffff>] 0xffffffffffffffff
May 11 10:59:48 [kernel] [ 2494.166038]
May 11 10:59:48 [kernel] [ 2494.166039] -> #0 (tasklist_lock){..??}:
May 11 10:59:48 [kernel] [ 2494.166043] [<
ffffffff802535ab>] __lock_acquire+0xd9b/0x1080
May 11 10:59:48 [kernel] [ 2494.166050] [<
ffffffff80253922>] lock_acquire+0x92/0xc0
May 11 10:59:48 [kernel] [ 2494.166057] [<
ffffffff804dede2>] _read_lock+0x32/0x50
May 11 10:59:48 [kernel] [ 2494.166063] [<
ffffffff80232e95>] is_current_pgrp_orphaned+0x15/0x50
May 11 10:59:48 [kernel] [ 2494.166071] [<
ffffffff803d5f80>] tty_check_change+0xb0/0x110
May 11 10:59:48 [kernel] [ 2494.166078] [<
ffffffff803dac5f>] set_termios+0x1f/0x4c0
May 11 10:59:48 [kernel] [ 2494.166085] [<
ffffffff803db379>] tty_mode_ioctl+0x279/0x3e0
May 11 10:59:48 [kernel] [ 2494.166092] [<
ffffffff803db51d>] n_tty_ioctl+0x3d/0x260
May 11 10:59:48 [kernel] [ 2494.166100] [<
ffffffff803d6c34>] tty_ioctl+0x154/0xfe0
May 11 10:59:48 [kernel] [ 2494.166107] [<
ffffffff802a05e1>] vfs_ioctl+0x31/0x90
May 11 10:59:48 [kernel] [ 2494.166114] [<
ffffffff802a06b3>] do_vfs_ioctl+0x73/0x2d0
May 11 10:59:48 [kernel] [ 2494.166121] [<
ffffffff802a095a>] sys_ioctl+0x4a/0x80
May 11 10:59:48 [kernel] [ 2494.166128] [<
ffffffff8020b5ab>] system_call_after_swapgs+0x7b/0x80
May 11 10:59:48 [kernel] [ 2494.166135] [<
ffffffffffffffff>] 0xffffffffffffffff
May 11 10:59:48 [kernel] [ 2494.166142]
May 11 10:59:48 [kernel] [ 2494.166143] other info that might help us debug this:
May 11 10:59:48 [kernel] [ 2494.166144]
May 11 10:59:48 [kernel] [ 2494.166146] 1 lock held by less/7053:
May 11 10:59:48 [kernel] [ 2494.166148] #0: (&tty->ctrl_lock){....}, at: [<
ffffffff803d5f31>] tty_check_change+0x61/0x110
May 11 10:59:48 [kernel] [ 2494.166155]
May 11 10:59:48 [kernel] [ 2494.166156] stack backtrace:
May 11 10:59:48 [kernel] [ 2494.166159] Pid: 7053, comm: less Not tainted
2.6.26-rc1-00007-g91b3a7a #217
May 11 10:59:48 [kernel] [ 2494.166161]
May 11 10:59:48 [kernel] [ 2494.166162] Call Trace:
May 11 10:59:48 [kernel] [ 2494.166168] [<
ffffffff80251223>] print_circular_bug_tail+0x83/0x90
May 11 10:59:48 [kernel] [ 2494.166172] [<
ffffffff80250889>] ? print_circular_bug_entry+0x49/0x60
May 11 10:59:48 [kernel] [ 2494.166178] [<
ffffffff802535ab>] __lock_acquire+0xd9b/0x1080
May 11 10:59:48 [kernel] [ 2494.166184] [<
ffffffff80232e95>] ? is_current_pgrp_orphaned+0x15/0x50
May 11 10:59:48 [kernel] [ 2494.166189] [<
ffffffff80253922>] lock_acquire+0x92/0xc0
May 11 10:59:48 [kernel] [ 2494.166206] [<
ffffffff803d5f80>] tty_check_change+0xb0/0x110
May 11 10:59:48 [kernel] [ 2494.166211] [<
ffffffff803dac5f>] set_termios+0x1f/0x4c0
May 11 10:59:48 [kernel] [ 2494.166216] [<
ffffffff803d3423>] ? tty_ldisc_try+0x23/0x60
May 11 10:59:48 [kernel] [ 2494.166220] [<
ffffffff803d3444>] ? tty_ldisc_try+0x44/0x60
May 11 10:59:48 [kernel] [ 2494.166224] [<
ffffffff804df2c5>] ? _spin_unlock_irqrestore+0x65/0x80
May 11 10:59:48 [kernel] [ 2494.166230] [<
ffffffff803db379>] tty_mode_ioctl+0x279/0x3e0
May 11 10:59:48 [kernel] [ 2494.166234] [<
ffffffff803d3444>] ? tty_ldisc_try+0x44/0x60
May 11 10:59:48 [kernel] [ 2494.166239] [<
ffffffff803db51d>] n_tty_ioctl+0x3d/0x260
May 11 10:59:48 [kernel] [ 2494.166244] [<
ffffffff803d6c34>] tty_ioctl+0x154/0xfe0
May 11 10:59:48 [kernel] [ 2494.166249] [<
ffffffff80252baa>] ? __lock_acquire+0x39a/0x1080
May 11 10:59:48 [kernel] [ 2494.166256] [<
ffffffff80252baa>] ? __lock_acquire+0x39a/0x1080
May 11 10:59:48 [kernel] [ 2494.166263] [<
ffffffff80252baa>] ? __lock_acquire+0x39a/0x1080
May 11 10:59:48 [kernel] [ 2494.166269] [<
ffffffff802a05e1>] vfs_ioctl+0x31/0x90
May 11 10:59:48 [kernel] [ 2494.166274] [<
ffffffff802a06b3>] do_vfs_ioctl+0x73/0x2d0
May 11 10:59:48 [kernel] [ 2494.166280] [<
ffffffff802a095a>] sys_ioctl+0x4a/0x80
May 11 10:59:48 [kernel] [ 2494.166286] [<
ffffffff8020b5ab>] system_call_after_swapgs+0x7b/0x80
May 11 10:59:48 [kernel] [ 2494.166292]
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Brown [Wed, 14 May 2008 23:05:54 +0000 (16:05 -0700)]
Remove blkdev warning triggered by using md
As setting and clearing queue flags now requires that we hold a spinlock
on the queue, and as blk_queue_stack_limits is called without that lock,
get the lock inside blk_queue_stack_limits.
For blk_queue_stack_limits to be able to find the right lock, each md
personality needs to set q->queue_lock to point to the appropriate lock.
Those personalities which didn't previously use a spin_lock, us
q->__queue_lock. So always initialise that lock when allocated.
With this in place, setting/clearing of the QUEUE_FLAG_PLUGGED bit will no
longer cause warnings as it will be clear that the proper lock is held.
Thanks to Dan Williams for review and fixing the silly bugs.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Alistair John Strachan <alistair@devzero.co.uk>
Cc: Nick Piggin <npiggin@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jacek Luczak <difrost.kernel@gmail.com>
Cc: Prakash Punnoor <prakash@punnoor.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Wed, 14 May 2008 23:05:53 +0000 (16:05 -0700)]
char: select fw_loader by moxa
Select FW_LOADER since moxa needs it, otherwise we face link problems such
as:
drivers/built-in.o: In function
moxa_pci_probe':moxa.c:(.devinit.text+0x76d8): undefined reference to
request_firmware'
:moxa.c:(.devinit.text+0x7e6e): undefined reference to release_firmware'
make: *** [.tmp_vmlinux1] Error 1
Reported-by: Philippe Roussel <p.o.roussel@free.fr>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiko Carstens [Wed, 14 May 2008 23:05:52 +0000 (16:05 -0700)]
memory_hotplug: always initialize pageblock bitmap
Trying to online a new memory section that was added via memory hotplug
sometimes results in crashes when the new pages are added via __free_page.
Reason for that is that the pageblock bitmap isn't initialized and hence
contains random stuff. That means that get_pageblock_migratetype()
returns also random stuff and therefore
list_add(&page->lru,
&zone->free_area[order].free_list[migratetype]);
in __free_one_page() tries to do a list_add to something that isn't even
necessarily a list.
This happens since
86051ca5eaf5e560113ec7673462804c54284456 ("mm: fix
usemap initialization") which makes sure that the pageblock bitmap gets
only initialized for pages present in a zone. Unfortunately for hot-added
memory the zones "grow" after the memmap and the pageblock memmap have
been initialized. Which means that the new pages have an unitialized
bitmap. To solve this the calls to grow_zone_span() and grow_pgdat_span()
are moved to __add_zone() just before the initialization happens.
The patch also moves the two functions since __add_zone() is the only
caller and I didn't want to add a forward declaration.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Venki Pallipadi [Wed, 14 May 2008 23:05:51 +0000 (16:05 -0700)]
mprotect: prevent alteration of the PAT bits
There is a defect in mprotect, which lets the user change the page cache
type bits by-passing the kernel reserve_memtype and free_memtype
wrappers. Fix the problem by not letting mprotect change the PAT bits.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Wed, 14 May 2008 23:05:51 +0000 (16:05 -0700)]
per_cpu: fix DEFINE_PER_CPU_SHARED_ALIGNED for modules
Current module loader lookups ".data.percpu" ELF section to perform
per_cpu relocation. But DEFINE_PER_CPU_SHARED_ALIGNED() uses another
section (".data.percpu.shared_aligned"), currently only handled in
vmlinux.lds, not by module loader.
To correct this problem, instead of adding logic into module loader, or
using at build time a module.lds file for all arches to group
".data.percpu.shared_aligned" into ".data.percpu", just use ".data.percpu"
for modules.
Alignment requirements are correctly handled by ld and module loader.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geoff Levand [Wed, 14 May 2008 23:05:50 +0000 (16:05 -0700)]
memory_hotplug: check for walk_memory_resource() failure in online_pages()
Add a check to online_pages() to test for failure of
walk_memory_resource(). This fixes a condition where a failure
of walk_memory_resource() can lead to online_pages() returning
success without the requested pages being onlined.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Keith Mannthey <kmannth@us.ibm.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harvey Harrison [Wed, 14 May 2008 23:05:49 +0000 (16:05 -0700)]
lib: create common ascii hex array
Add a common hex array in hexdump.c so everyone can use it.
Add a common hi/lo helper to avoid the shifting masking that is
done to get the upper and lower nibbles of a byte value.
Pull the pack_hex_byte helper from kgdb as it is opencoded many
places in the tree that will be consolidated.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robin Getz [Wed, 14 May 2008 23:05:48 +0000 (16:05 -0700)]
video/logo: add support for Blackfin/Linux logo for framebuffer console
This art design is beautiful, isn't it? And you can watch our demo on
YouTube: http://youtube.com/watch?v=fKyQOntPEFs
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tiger Yang [Wed, 14 May 2008 23:05:47 +0000 (16:05 -0700)]
ext3/4: fix uninitialized bs in ext3/4_xattr_set_handle()
This fix the uninitialized bs when we try to replace a xattr entry in
ibody with the new value which require more than free space.
This situation only happens we format ext3/4 with inode size more than 128 and
we have put xattr entries both in ibody and block. The consequences about
this bug is we will lost the xattr block which pointed by i_file_acl with all
xattr entires in it. We will alloc a new xattr block and put that large value
entry in it. The old xattr block will become orphan block.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mirco Tischler [Wed, 14 May 2008 23:05:46 +0000 (16:05 -0700)]
cgroups: fix compile warning
Return type of cpu_rt_runtime_write() should be int instead of ssize_t.
Signed-off-by: Mirco Tischler <mt-ml@gmx.de>
Acked-by: Paul Menage <menage@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Frysinger [Wed, 14 May 2008 23:05:42 +0000 (16:05 -0700)]
asm-{alpha,h8300,um,v850,xtensa}/param.h: unbreak HZ for userspace
I noticed this because alpha was broken due to the recent commit commit
bdc807871d58285737d50dc6163d0feb72cb0dc2 ("avoid overflows in
kernel/time.c"). Most arches do something like this in their
asm/param.h:
#ifdef __KERNEL__
# define HZ CONFIG_HZ
#else
# define HZ 100
#endif
A few arches though (namely alpha/h8300/um/v850/xtensa) either do no set
HZ at all for !__KERNEL__, or they set it wrongly. This should bring all
arches in line by setting up HZ for userspace.
Without this currently perl 5.10 doesn't build on alpha:
perl.c: In function 'perl_construct':
perl.c:388: error: 'CONFIG_HZ' undeclared (first use in this function)
-> http://buildd.debian.org/fetch.cgi?pkg=perl;ver=5.10.0-10;arch=alpha;stamp=
1210252894
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ HZ on alpha is 1024 for historical reasons. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mingming Cao [Wed, 14 May 2008 23:05:41 +0000 (16:05 -0700)]
jbd: need to hold j_state_lock to updates to transaction t_state to T_COMMIT
Updating the current transaction's t_state is protected by j_state_lock. We
need to do the same when updating the t_state to T_COMMIT.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Acked-by: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiko Carstens [Wed, 14 May 2008 23:05:40 +0000 (16:05 -0700)]
memory hotplug: memmap_init_zone called twice
__add_zone calls memmap_init_zone twice if memory gets attached to an empty
zone. Once via init_currently_empty_zone and once explictly right after that
call.
Looks like this is currently not a bug, however the call is superfluous and
might lead to subtle bugs if memmap_init_zone gets changed. So make sure it
is called only once.
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nate Case [Wed, 14 May 2008 23:05:39 +0000 (16:05 -0700)]
ipmi: support I/O resources in OF driver
The current OF probing assumes that the resource is IORESOURCE_MEM. This
checks for the IORESOURCE_IO flag and behaves appropriately. An I/O resource
can exist with an ipmi device node on a legacy ISA bus.
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Ferre [Wed, 14 May 2008 23:05:38 +0000 (16:05 -0700)]
atmel_lcdfb: fix initialization of a pre-allocated framebuffer
Fix initialization of framebuffer not calling ioremap_writecombine() function
and not using internal SRAM for at91sam9rl.
This is a little rework of the "Don't initialize a pre-allocated framebuffer"
patch that corrects the call to ioremap_writecombine() function.
It also cuts the use of internal SRAM for at91sam9rl : it is a bit small
for a framebuffer.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miklos Szeredi [Wed, 14 May 2008 23:05:37 +0000 (16:05 -0700)]
mm: fix infinite loop in filemap_fault
filemap_fault will go into an infinite loop if ->readpage() fails
asynchronously.
AFAICS the bug was introduced by this commit, which removed the wait after the
final readpage:
commit
d00806b183152af6d24f46f0c33f14162ca1262a
Author: Nick Piggin <npiggin@suse.de>
Date: Thu Jul 19 01:46:57 2007 -0700
mm: fix fault vs invalidate race for linear mappings
Fix by reintroducing the wait_on_page_locked() after ->readpage() to make sure
the page is up-to-date before jumping back to the beginning of the function.
I've noticed this while testing nfs exporting on fuse. The patch
fixes it.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rene Herman [Wed, 14 May 2008 23:05:36 +0000 (16:05 -0700)]
pnp: add ISAPnP MPU option quirks
The AD181x and AZT230 chips don't support an IRQ-less MPU401 option but
work fine without one. This adds (priority functional) IRQ-less options
for each port option to help systems with few available IRQs.
The AD1815 quirk can't use pnp_register_irq_resource() due to doubly
penalizing the IRQ. Also, while not a practical issue due to no IRQ
option being present for the dependents, this needs to add in front, not
back.
Doesn't use pnp_register_port_resource() for symetry with above.
This does not delete the AD1815 independent option even though it should
be empty after the IRQ transfer due to AD1816 coming with an empty but
still present independent option by default.
Was tested on AD1815, AD1816 and AZT2320. The ALSA snd-
ad1818a driver
also support the AZT2002 ID for MPU401 but this doesn't as I was unable to
test it.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Tested-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Len Brown <len.brown@intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rene Herman [Wed, 14 May 2008 23:05:34 +0000 (16:05 -0700)]
pnp: add pnp_build_option() to the API
The subsequent AD181x quirk patch would like this as part of the API.
pnp_register_dependent_option() adds to the same dependent chain the quirk is
walking which is fairly unclean. This enables a private option chain build
which it can then just add onto the end when done.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Tested-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Len Brown <len.brown@intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rene Herman [Wed, 14 May 2008 23:05:33 +0000 (16:05 -0700)]
pnp: clean up pnp_fixup_device()
Make it look a bit more like pci_fixup_device/pci_do_fixups. Also print
the PnP ID and delete the () from the "foo+0x0/0x1234()".
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Tested-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Len Brown <len.brown@intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Rottmann [Wed, 14 May 2008 23:05:32 +0000 (16:05 -0700)]
fix "lxfb: extend PLL table to support dotclocks below 25 MHz"
The following patch caused a regression with OLPC panels:
commit
3888d4639e78802c4ec1086127124e890461b9e4
lxfb: extend PLL table to support dotclocks below 25 MHz
Extends the PLL frequency table of the AMD Geode-LX frame buffer driver to
make use of the DIV4 bit, thus adding support for dotclocks between 6 and 25
MHz. These are needed for small LCDs (e.g. 320x240). Also inserts some
intermediate steps between pre-existing frequencies.
The problem was the insertion of intermediate steps into the frequency
table; they would cause the wrong frequency to be matched. This patch
drops those intermediate frequencies while keeping the sub-25MHz
frequencies.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jens Rottmann <JRottmann@LiPPERT-AT.de>
Tested-by: Andres Salomon <dilinger@debian.org>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Wed, 14 May 2008 23:05:31 +0000 (16:05 -0700)]
oprofile: don't request cache line alignment for cpu_buffer
Alignment was previously requested because cpu_buffer was an [NR_CPUS]
array, to avoid cache line sharing between CPUS.
After commit
608dfddd845da5ab6accef70154c8910529699f7 (oprofile: change
cpu_buffer from array to per_cpu variable ), we dont need to force an
alignement anymore since cpu_buffer sits in per_cpu zone.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sebastian Siewior [Wed, 14 May 2008 23:05:30 +0000 (16:05 -0700)]
m68knommu: add info about removing mcfserial
Schedule a removal for this driver. Alternative driver is available for
a while now.
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Grant Likely [Wed, 14 May 2008 23:05:29 +0000 (16:05 -0700)]
mpc5200_psc_spi: typo fix in header block
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Van Hensbergen [Fri, 9 May 2008 01:26:37 +0000 (20:26 -0500)]
9p: fix error path during early mount
There was some cleanup issues during early mount which would trigger
a kernel bug for certain types of failure. This patch reorganizes the
cleanup to get rid of the bad behavior.
This also merges the 9pnet and 9pnet_fd modules for the purpose of
configuration and initialization. Keeping the fd transport separate
from the core 9pnet code seemed like a good idea at the time, but in
practice has caused more harm and confusion than good.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Eric Van Hensbergen [Sat, 3 May 2008 22:29:26 +0000 (17:29 -0500)]
9p: make cryptic unknown error from server less scary
Right now when we get an error string from the server that we can't
map we report a cryptic error that actually makes it look like we are
reporting a problem with the client. This changes the text of the log
message to clarify where the error is coming from.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Steven Rostedt [Sat, 3 May 2008 22:29:50 +0000 (17:29 -0500)]
9p: fix flags length in net
Some files in the net/9p directory uses "int" for flags. This can
cause hard to find bugs on some architectures. This patch converts the
flags to use "long" instead.
This bug was discovered by doing an allyesconfig make on the -rt kernel
where checks are done to ensure all flags are of size sizeof(long).
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
Josef 'Jeff' Sipek [Fri, 7 Mar 2008 17:40:33 +0000 (11:40 -0600)]
9p: Correct fidpool creation failure in p9_client_create
On error, p9_idpool_create returns an ERR_PTR-encoded errno.
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
Josef 'Jeff' Sipek [Fri, 7 Mar 2008 17:39:13 +0000 (11:39 -0600)]
9p: use struct mutex instead of struct semaphore
Replace semaphores protecting use flags with a mutex.
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
Eric Van Hensbergen [Fri, 7 Mar 2008 16:53:53 +0000 (10:53 -0600)]
9p: propagate parse_option changes to client and transports
Propagate changes that were made to the parse_options code to the
other parse options pieces present in the other modules. Looks like
the client parse options was probably corrupting the parse string
and causing problems for others.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Jim Meyering [Thu, 6 Mar 2008 23:10:28 +0000 (17:10 -0600)]
fs/9p/v9fs.c (v9fs_parse_options): Handle kstrdup and match_strdup failure. Now that this function can fail, return an int, diagnose other option-parsing failures, and adjust the sole caller: (v9fs_session_init): Handle kstrdup failure. Propagate any new v9fs_parse_options failure "up".
Signed-off-by: Jim Meyering <meyering@redhat.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
Eric Van Hensbergen [Wed, 5 Mar 2008 13:08:09 +0000 (07:08 -0600)]
9p: Documentation updates
The kernel-doc comments of much of the 9p system have been in disarray since
reorganization. This patch fixes those problems, adds additional documentation
and a template book which collects the 9p information.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Markus Armbruster [Tue, 26 Feb 2008 15:57:11 +0000 (09:57 -0600)]
add match_strlcpy() us it to make v9fs make uname and remotename parsing more robust
match_strcpy() is a somewhat creepy function: the caller needs to make sure
that the destination buffer is big enough, and when he screws up or
forgets, match_strcpy() happily overruns the buffer.
There's exactly one customer: v9fs_parse_options(). I believe it currently
can't overflow its buffer, but that's not exactly obvious.
The source string is a substing of the mount options. The kernel silently
truncates those to PAGE_SIZE bytes, including the terminating zero. See
compat_sys_mount() and do_mount().
The destination buffer is obtained from __getname(), which allocates from
name_cachep, which is initialized by vfs_caches_init() for size PATH_MAX.
We're safe as long as PATH_MAX <= PAGE_SIZE. PATH_MAX is 4096. As far as
I know, the smallest PAGE_SIZE is also 4096.
Here's a patch that makes the code a bit more obviously correct. It
doesn't depend on PATH_MAX <= PAGE_SIZE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Jim Meyering <meyering@redhat.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Linus Torvalds [Wed, 14 May 2008 21:29:34 +0000 (14:29 -0700)]
Merge git://git./linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
cs5520: disable VDMA
ide/Kconfig: couple of fixes
alim15x3: remove WDC_ALI15X3 config option
alim15x3: add "wdc_udma" module parameter
alim15x3: remove stale warning about ATI RS100 northbridge
alim15x3: trivial cleanup for ali_set_pio_mode()
make ide-iops.c:SELECT_MASK() static
SWARM IDE: Fix up following changes to ide_hwif_t
Bartlomiej Zolnierkiewicz [Wed, 14 May 2008 21:06:16 +0000 (23:06 +0200)]
cs5520: disable VDMA
Disable Virtual DMA support for now (it causes system hangs).
Thanks to TAKADA Yoshihito for the help with debugging the problem.
Reported-by: TAKADA Yoshihito <takada@mbf.nifty.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 14 May 2008 21:06:16 +0000 (23:06 +0200)]
ide/Kconfig: couple of fixes
* Don't ask to enable no longer existing config options
("Use DMA by default when available" and "Special UDMA Feature").
* PIIX host driver doesn't support Victory66 chipset.
* "ide0=cmd640_vlb" -> "cmd640.probe_vlb"
* "ide=doubler" -> "gayle.doubler"
* Amiga IDE doubler support is a feature for gayle host driver
not a separate host driver.
* Remove Andre's mail.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 14 May 2008 21:06:16 +0000 (23:06 +0200)]
alim15x3: remove WDC_ALI15X3 config option
There is "wdc_udma" module parameter now.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 14 May 2008 21:06:16 +0000 (23:06 +0200)]
alim15x3: add "wdc_udma" module parameter
Add "wdc_udma" module parameter for allowing UDMA transfers
on M1543C-E chipset for WDC disks.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 14 May 2008 21:06:16 +0000 (23:06 +0200)]
alim15x3: remove stale warning about ATI RS100 northbridge
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This page took 0.047567 seconds and 5 git commands to generate.