Michael Chan [Sun, 6 Jan 2013 12:51:09 +0000 (12:51 +0000)]
tg3: Improve PCI function number detection.
Simplify the code to detect PCI function number on 5717, 5719, and 5720.
If shared memory does not have proper signature, read the function number
from register directly.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 6 Jan 2013 12:51:08 +0000 (12:51 +0000)]
tg3: Add NVRAM support for 5762
Detect NVRAM types for 5762 and read OTP firmware version.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 6 Jan 2013 12:51:07 +0000 (12:51 +0000)]
tg3: Add support for new 5762 ASIC
Add basic support for 5762 which is a 57765_PLUS class device.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki / 吉藤英明 [Fri, 4 Jan 2013 03:58:04 +0000 (03:58 +0000)]
ndisc: Remove unused space at tail of skb for ndisc messages. (TAKE 3)
Currently, the size of skb allocated for NDISC is MAX_HEADER +
LL_RESERVED_SPACE(dev) + packet length + dev->needed_tailroom,
but only LL_RESERVED_SPACE(dev) bytes is "reserved" for headers.
As a result, the skb looks like this (after construction of the
message):
head data tail end
+--------------------------------------------------------------+
+ | | | |
+--------------------------------------------------------------+
|<-hlen---->|<---ipv6 packet------>|<--tlen-->|<--MAX_HEADER-->|
=LL_ = dev
RESERVED_ ->needed_
SPACE(dev) tailroom
As the name implies, "MAX_HEADER" is used for headers, and should
be "reserved" in prior to packet construction. Or, if some space
is really required at the tail of ther skb, it should be
explicitly documented.
We have several option after construction of NDISC message:
Option 1:
head data tail end
+---------------------------------------------+
+ | | |
+---------------------------------------------+
|<-hlen---->|<---ipv6 packet------>|<--tlen-->|
=LL_ = dev
RESERVED_ ->needed_
SPACE(dev) tailroom
Option 2:
head data tail end
+--------------------------------------------------+
+ | | |
+--------------------------------------------------+
|<--MAX_HEADER-->|<---ipv6 packet------>|<--tlen-->|
= dev
->needed_
tailroom
Option 3:
head data tail end
+--------------------------------------------------------------+
+ | | | |
+--------------------------------------------------------------+
|<--MAX_HEADER-->|<-hlen---->|<---ipv6 packet------>|<--tlen-->|
=LL_ = dev
RESERVED_ ->needed_
SPACE(dev) tailroom
Our tunnel drivers try expanding headroom and the space for tunnel
encapsulation was not a mandatory space -- so we are not seeing
bugs here --, but just for optimization for performance critial
situations.
Since NDISC messages are not performance critical unlike TCP,
and as we know outgoing device, LL_RESERVED_SPACE(dev) should be
just enough for the device in most (if not all) cases:
LL_RESERVED_SPACE(dev) <= LL_MAX_HEADER <= MAX_HEADER
Note that LL_RESERVED_SPACE(dev) is also enough for NDISC over
SIT (e.g., ISATAP).
So, I think Option 1 is just fine here.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Li [Thu, 3 Jan 2013 16:04:23 +0000 (16:04 +0000)]
NET: FEC: dynamtic check DMA desc buff type
MX6 and mx28 support enhanced DMA descriptor buff to support 1588
ptp. But MX25, MX3x, MX5x can't support enhanced DMA descriptor buff.
Check fec type and choose correct DMA descriptor buff type.
Remove static config CONFIG_FEC_PTP.
ptp function will be auto detected.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Hüwe [Thu, 3 Jan 2013 04:23:50 +0000 (04:23 +0000)]
ethernet/broadcom/tg3: Fix sparse warning: constant 0x7fffffffffffffff is so big it is long long
Sparse complains that:
drivers/net/ethernet/broadcom/tg3.c:5670:55: sparse: constant
0x7fffffffffffffff is so big it is long long (on x86/32 bit)
so we suffix the constant with LL in the header file.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Glendinning [Thu, 3 Jan 2013 03:00:16 +0000 (03:00 +0000)]
smsc95xx: enable dynamic autosuspend
This patch enables USB dynamic autosuspend for LAN9500A. This
saves very little power in itself, but it allows power saving
in upstream hubs/hosts.
The earlier devices in this family (LAN9500/9512/9514) do not
support this feature.
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Glendinning [Thu, 3 Jan 2013 03:00:15 +0000 (03:00 +0000)]
smsc95xx: eliminate duplicate warnings on io failure
The register read/write functions already log a warning if
an access fails, so this patch removes the additional warnings
logged by callers that don't add any more information.
This patch makes the resulting driver smaller by not containing
as many warning strings.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 4 Jan 2013 21:32:04 +0000 (13:32 -0800)]
net: introduce upper device lists and remove dev->master
Jiri Pirko says:
====================
This is a V6 of a repost of my previous patchset:
"[patch net-next v2 00/15] net: introduce upper device lists and remove dev->master" from Aug 14
The discussion around
"[net-next] bonding: don't allow the master to become its slave"
forced me to think about upper<->lower device connections.
This patchset adds a possibility to record upper device linkage.
All upper<->lower devices are converted to use this mechanism right after.
That leads to dev->master removal because this info becomes redundant since
"master links" have the same value.
After all changes, there is no longer possible to do things as:
"bond->someotherdevice->samebond"
Also I think that drivers like cxgb3, qlcnic, qeth would benefit by this
in future by being able to get more appropriate info about l3 addresses.
v5->v6:
- netdev_has_upper_dev() - added statement to comment that this is looking at
the immediate upper devices only.
- renamed "RTNL semaphore" -> "RTNL lock" in all comments
- renamed __netdev_has_upper_dev() to __netdev_search_upper_dev() to emhasize
the difference to netdev_has_upper_dev()
v4->v5:
- fixed missed typo in drivers/infiniband/hw/nes/nes_cm.c
v3->v4:
- comments in __netdev_upper_dev_link() squashed into one line
- kfree_rcu used instead of call_rcu in netdev_upper_dev_unlink()
v2->v3:
- removed recursion in __netdev_has_upper_dev()
- refreshed bits to be applicable on current net-next
v1->v2:
- s/unique/master/ better naming + stays closer to the past
- fixed vlan err goto
- original patch 15 (WARN_ON change) is squashed into the first patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:49:03 +0000 (22:49 +0000)]
net: kill dev->master
Nobody uses this now. Remove it.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:49:02 +0000 (22:49 +0000)]
net: remove no longer used netdev_set_bond_master() and netdev_set_master()
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:49:01 +0000 (22:49 +0000)]
bonding: remove usage of dev->master
Benefit from new upper dev list and free bonding from dev->master usage.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:49:00 +0000 (22:49 +0000)]
nes: remove usage of dev->master
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:59 +0000 (22:48 +0000)]
vlan: remove usage of dev->master in __vlan_find_dev_deep()
Also, since all users call __vlan_find_dev_deep() with rcu_read_lock,
make no possibility to call this with rtnl mutex held only.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:58 +0000 (22:48 +0000)]
qeth: ensure that __vlan_find_dev_deep() is called with rcu_read_lock
Also benefit from rcu_read_lock held and use __in_dev_get_rcu() in ipv4 case.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:57 +0000 (22:48 +0000)]
qlcnic: guard __vlan_find_dev_deep() by rcu_read_lock
rcu_read_lock was missing here
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:56 +0000 (22:48 +0000)]
cxgb3: remove usage of dev->master
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:55 +0000 (22:48 +0000)]
netpoll: remove usage of dev->master
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:54 +0000 (22:48 +0000)]
bridge: remove usage of netdev_set_master()
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:53 +0000 (22:48 +0000)]
team: remove usage of netdev_set_master()
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:52 +0000 (22:48 +0000)]
rtnetlink: remove usage of dev->master
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:51 +0000 (22:48 +0000)]
vlan: add link to upper device
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:50 +0000 (22:48 +0000)]
macvlan: add link to upper device
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 3 Jan 2013 22:48:49 +0000 (22:48 +0000)]
net: introduce upper device lists
This lists are supposed to serve for storing pointers to all upper devices.
Eventually it will replace dev->master pointer which is used for
bonding, bridge, team but it cannot be used for vlan, macvlan where
there might be multiple upper present. In case the upper link is
replacement for dev->master, it is marked with "master" flag.
New upper device list resolves this limitation. Also, the information
stored in lists is used for preventing looping setups like
"bond->somethingelse->samebond"
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 1 Jan 2013 03:30:19 +0000 (03:30 +0000)]
ll_temac: fix mac address setting
Previously, when invalid address was passed to ndo_set_mac_address,
random mac was generated and set. Fix this by returning -EADDRNOTAVAIL
in this situation.
Also polish the code around a bit.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 1 Jan 2013 03:30:18 +0000 (03:30 +0000)]
um: net: use eth_hw_addr_random() to generate random mac
Also remove unused "mac" from uml_net struct.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 1 Jan 2013 03:30:17 +0000 (03:30 +0000)]
net: remove unnecessary NET_ADDR_RANDOM "bitclean"
NET_ADDR_SET is set in dev_set_mac_address() no need to alter
dev->addr_assign_type value in drivers.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 1 Jan 2013 03:30:16 +0000 (03:30 +0000)]
net: add address assign type "SET"
This is the way to indicate that mac address of a device has been set by
dev_set_mac_address()
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 1 Jan 2013 03:30:15 +0000 (03:30 +0000)]
net: set dev->addr_assign_type correctly
Not a bitfield, but a plain value.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 1 Jan 2013 03:30:14 +0000 (03:30 +0000)]
net: call add_device_randomness() only after successful mac change
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 1 Jan 2013 03:30:13 +0000 (03:30 +0000)]
rtnl: use dev_set_mac_address() instead of plain ndo_
Benefit from existence of dev_set_mac_address() and remove duplicate
code.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Flavio Leitner [Sun, 30 Dec 2012 08:27:29 +0000 (08:27 +0000)]
team: update master carrier state
Update master's carrier state when there is any
change with its ports.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Wed, 2 Jan 2013 23:10:15 +0000 (23:10 +0000)]
qlcnic: fix build error
Fix the following error reported by kbuild test robot.
static declaration of 'qlcnic_restore_indev_addr' follows
non-static declaration.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Rothwell [Wed, 2 Jan 2013 17:23:53 +0000 (17:23 +0000)]
qlcnic: do not duplicate infrastructure functions
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sony Chacko [Tue, 1 Jan 2013 03:20:30 +0000 (03:20 +0000)]
qlcnic: update driver version
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shahed Shaikh [Tue, 1 Jan 2013 03:20:29 +0000 (03:20 +0000)]
qlcnic: remove unused definitions from header file
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 03:20:28 +0000 (03:20 +0000)]
qlcnic: 83xx ethtool interface routines
83xx ethtool interface routines
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 03:20:27 +0000 (03:20 +0000)]
qlcnic: 83xx register dump routines
Add 83xx register dump routines
Update 82xx register dump routines
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 03:20:26 +0000 (03:20 +0000)]
qlcnic: enable 83xx virtual NIC mode
Enable 83xx virtual NIC mode
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 03:20:25 +0000 (03:20 +0000)]
qlcnic: flash template based firmware reset recovery
Flash template provides instructions to stop, restart and initalize the
firmware. These instructions are abstracted as a series of read, write and
poll operations on hardware registers. Register information and operation
specifics are not exposed to the driver. Driver reads the template from
flash and executes the instructions located at pre-defined offsets.
Template based firmware reset recovery and initialization mechanism minimize
driver changes as firmware evolves.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 04:11:55 +0000 (04:11 +0000)]
qlcnic: 83xx CNA inter driver communication mechanism
Inter Driver Communication (IDC) module.
CNA function drivers(ISCSI, FCOE and NIC) which shares the adapter
relies on IDC mechanism for gracefull shut down, restart and
firmware error recovery.
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 03:20:23 +0000 (03:20 +0000)]
qlcnic: 83xx adpater flash interface routines
83xx adapter flash memory map, data structures and interface routines
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 03:20:22 +0000 (03:20 +0000)]
qlcnic: 83xx sysfs routines
Add 83xx sysfs interface routines
Update 82xx sysfs interface routines
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 03:20:21 +0000 (03:20 +0000)]
qlcnic: 83xx base driver
Enable base 83xx adapter driver.
Common driver interface routines like probe,
interface up/down routines, irq and resource
allocation routines are modified to add support for 83xx
adapter.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 03:20:20 +0000 (03:20 +0000)]
qlcnic: 83xx data path routines
Add 83xx adapter data path routines
Update few 82xx adapter data path routines
Modify datapath resource allocation routines
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 03:20:19 +0000 (03:20 +0000)]
qlcnic: 83xx memory map and HW access routines
83xx adapter register map.
83xx hardware interface routines.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Tue, 1 Jan 2013 03:20:18 +0000 (03:20 +0000)]
qlcnic: macros for common register access
Refactor 82xx driver to support new adapter - Qlogic 83XX CNA
Use QLC_SHARED_REG_RD32 and QLC__SHARED_REG_WR32 macros
for 82xx and 83xx common register access.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Tue, 1 Jan 2013 03:20:17 +0000 (03:20 +0000)]
qlcnic: change driver hardware interface mechanism
Refactor 82xx driver to support new adapter - Qlogic 83XX CNA
Create adapter abstraction layer and seperate 82xx hardware access routines.
Create mailbox based HW interface mechanism
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:44 +0000 (05:22 +0000)]
bnx2x: Add VF device ids and enable feature
Add the various VF device ids (of all supported hardware)
Add the calls to enable_sriov and disable_sriov to enable the
SR-IOV feature. This patch also advances the version and release
date of the bnx2x module.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:43 +0000 (05:22 +0000)]
bnx2x: Support PF <-> VF Bulletin Board
The PF <-> VF Bulletin Board is a simple interface between the
PF and the VF. The main reason for the Bulletin Board is to allow
the PF to be the initiator. The VF publishes at 'acquire' stage
the GPA of a Bulletin Board structure it has allocated. The PF notes
this GPA in the VF database. The VF samples the Bulletin Board
periodically for new messages. The latest version of the BB is always
used.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:42 +0000 (05:22 +0000)]
bnx2x: Support VF FLR
The FLR indication arrives as an attention from the management processor.
Upon VF flr all FLRed function in the indication have already been
released by Firmware and now we basically need to free the resources
allocated to those VFs, and clean any remainders from the device
(FLR final cleanup).
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:41 +0000 (05:22 +0000)]
bnx2x: Support of PF driver of a VF release request
The 'release' request is the opposite of the 'acquire' request.
At release, all the resources allocated to the VF are reclaimed.
The release flow applies the close flow if applicable.
Note that there are actually two types of release:
1. The VF has been removed, and so issued a 'release' request
over the VF <-> PF Channel.
2. The PF is going down and so has to release all of it's VFs.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:40 +0000 (05:22 +0000)]
bnx2x: Support of PF driver of a VF close request
The 'close' command is the opposite of an init request. Here the
queues of the VF are closed (if any are opened) and released.
This flow applies the 'q_teardown' flow on all the queues.
The VF state is changed by this request.
Interrupts are disabled for the VF when closed.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:39 +0000 (05:22 +0000)]
bnx2x: Support of PF driver of a VF q_teardown request
The 'q_teardown' request is basically the opposite of the 'q_setup'.
Here the PF driver removes from the device the queue it opened against
the VF fastpath ring at 'setup_q' stage, along with all related
rx_mode info.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:38 +0000 (05:22 +0000)]
bnx2x: Support of PF driver of a VF q_filters request
The VF driver uses the 'q_filters' message on the VF <-> PF channel
for configuring an open queue, for example when the rxmode changes.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:37 +0000 (05:22 +0000)]
bnx2x: Support of PF driver of a VF setup_q request
Upon receiving a 'setup_q' request from the VF over the VF <-> PF
channel the PF driver will open a corresponding queue in the
device. The PF driver configures the queue with appropriate mac
address, vlan configuration, etc from the VF.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:36 +0000 (05:22 +0000)]
bnx2x: Support statistics collection for VFs by the PF
Statistics are collected by the PF driver. The collection is
performed via a query sent to the device which is basically an array
of 3-tuples of the form (statistics client, function, DMAE address).
In this patch the PF driver adds to the query, on top of the
statistics clients it is maintaining for itself (rss queues, storage,
etc), the 3-tuples for the VFs it is maintaining. The addresses used
are the GPAs of the statistics buffers supplied by the VF in the
init message on the VF <-> PF channel. The function parameter
ensures that the iommu will translate the GPA to the correct physical
address.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:35 +0000 (05:22 +0000)]
bnx2x: Support of PF driver of a VF init request
The VF driver will send an 'init' request as part of its nic load
flow. This message is used by the VF to publish the GPA's of its
status blocks, slow path ring and statistics buffer.
The PF driver notes all this down in the VF database, and also uses
this message to transfer the VF to VF_INIT state internally.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:34 +0000 (05:22 +0000)]
bnx2x: Support of PF driver of a VF acquire request
When a VF is probed by the VF driver, the VF driver sends an
'acquire' request over the VF <-> PF channel for the resources
it needs to operate (interrupts, queues, etc).
The PF driver either ratifies the request and allocates the resources,
responds with the maximum values it will allow the VF to acquire,
or fails the request entirely if there is a problem.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:33 +0000 (05:22 +0000)]
bnx2x: Infrastructure for VF <-> PF request on PF side
Support interrupt from device which indicates VF has placed
A request on the VF <-> PF channel.
The PF driver issues a DMAE to retrieve the request from the VM
memory (the Ghost Physical Address of the request is contained
in the interrupt. The PF driver uses the GPA in the DMAE request,
which is translated by the IOMMU to the correct physical address).
The request which arrives is examined to recognize the sending VF.
The PF driver allocates a workitem to handle the VF Operation (vfop).
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:32 +0000 (05:22 +0000)]
bnx2x: Prepare device and initialize VF database
At nic load of the PF, if VFs may be present, prepare the device
for the VFs. Initialize the VF database in preparation of VF arrival.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:31 +0000 (05:22 +0000)]
bnx2x: Allocate VF database in PF when VFs are present
When A PF determines that it may have to manage SRIOV VFs it
allocates a database for this purpose. The database is intended to
keep track of the VF state, the resources allocated for each VF
(queues, interrupt vectors, etc), the state of the VF's queues.
When the VF loads the database is updated accordingly.
When A VF closes the database is consulted to determine which
resources need to be released (close queues against device, reclaim
interrupt vectors, etc).
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:30 +0000 (05:22 +0000)]
bnx2x: VF fastpath
When VF driver is transmitting it must supply the correct mac
address in the parsing BD. This is used for firmware validation
and enforcement and also for tx-switching.
Refactor interrupt ack flow to allow for different BAR addresses of
the hardware in the PF BAR vs the VF BAR.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:29 +0000 (05:22 +0000)]
bnx2x: Support ndo_set_rxmode in VF driver
The VF driver uses the 'q_filter' request in the VF <-> PF channel to
have the PF configure the requested rxmode to device. ndo_set_rxmode
is called under bottom half lock, so sleeping until the response
arrives over the VF <-> PF channel is out of the question. For this reason
the VF driver returns from the ndo after scheduling a work item, which
in turn processes the rx mode request and adds the classification
information through the VF <-> PF channel accordingly.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:28 +0000 (05:22 +0000)]
bnx2x: Add teardown_q and close to VF <-> PF channel
When a VF is being closed its queues are released via
the 'teardown_q' and the VF itself is closed with
'close'. These are essentially the unload counterparts of
'init' and 'setup_q' from the load flow.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:27 +0000 (05:22 +0000)]
bnx2x: Add init, setup_q, set_mac to VF <-> PF channel
'init' - init an acquired VF. Supply allocation GPAs to PF.
'setup_q' - PF to allocate a queue in device on behalf of the VF.
'set_mac' - PF to configure a mac in device on behalf of the VF.
VF driver uses these requests in the VF <-> PF channel in nic_load
flow.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:26 +0000 (05:22 +0000)]
bnx2x: Separate VF and PF logic
Generally, the VF driver cannot access the chip, except by the
narrow window its BAR allows. Care had to be taken so the VF driver
will not reach code which accesses the chip elsewhere.
Refactor the nic_load flow into parts so it would be
easier to separate the VF-only logic from the PF-only logic.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:25 +0000 (05:22 +0000)]
bnx2x: Add to VF <-> PF channel the release request
VF driver uses this request when removed. The PF driver
reclaims all resources allocated for that VF at this
time.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:24 +0000 (05:22 +0000)]
bnx2x: VF <-> PF channel 'acquire' at vf probe
Add the 'acquire' request to VF <-> PF channel and use it at
VF probe. In the acquire request the VF driver lists the resources
it would like to have. In the response the PF either ratifies the
request, or denies it and supplies the maximum values supported.
The VF may then attempt another acquire request.
This patch adds the bnx2x_vfpf.c file which contains the
implementation of the VF to PF hardware channel.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Tue, 1 Jan 2013 05:22:23 +0000 (05:22 +0000)]
bnx2x: Support probing and removing of VF device
To support probing and removing of a bnx2x virtual function
the following were added:
1. add bnx2x_vfpf.h: defines the VF to PF channel
2. add bnx2x_sriov.h: header for bnx2x SR-IOV functionality
3. enumerate VF hw types (identify VFs)
4. if driving a VF, map VF bar
5. if driving a VF, allocate Vf to PF channel
6. refactor interrupt flows to include VF
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Flavio Leitner [Sat, 29 Dec 2012 16:37:33 +0000 (16:37 +0000)]
team: add ethtool support
This patch adds few ethtool operations to team driver.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 29 Dec 2012 16:26:10 +0000 (16:26 +0000)]
veth: extend device features
veth is lacking most modern facilities, like SG, checksums, TSO.
It makes sense to extend dev->features to get them, or GRO aggregation
is defeated by a forced segmentation.
Reported-by: Andrew Vagin <avagin@parallels.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 29 Dec 2012 16:02:43 +0000 (16:02 +0000)]
veth: reduce stat overhead
veth stats are a bit bloated. There is no need to account transmit
and receive stats, since they are absolutely symmetric.
Also use a per device atomic64_t for the dropped counter, as it
should never be used in fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Flavio Leitner [Sat, 29 Dec 2012 15:31:01 +0000 (15:31 +0000)]
team: implement carrier change
The user space teamd daemon may need to control the
master's carrier state depending on the selected mode.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 28 Dec 2012 18:15:22 +0000 (18:15 +0000)]
bridge: respect RFC2863 operational state
The bridge link detection should follow the operational state
of the lower device, rather than the carrier bit. This allows devices
like tunnels that are controlled by userspace control plane to work
with bridge STP link management.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 28 Dec 2012 10:50:17 +0000 (10:50 +0000)]
net: filter: return -EINVAL if BPF_S_ANC* operation is not supported
Currently, we return -EINVAL for malformed or wrong BPF filters.
However, this is not done for BPF_S_ANC* operations, which makes it
more difficult to detect if it's actually supported or not by the
BPF machine. Therefore, we should also return -EINVAL if K is within
the SKF_AD_OFF universe and the ancillary operation did not match.
Why exactly is it needed? If tools such as libpcap/tcpdump want to
make use of new ancillary operations (like filtering VLAN in kernel
space), there is currently no sane way to test if this feature /
BPF_S_ANC* op is present or not, since no error is returned. This
patch will make life easier for that and allow for a proper usage
for user space applications.
There was concern, if this patch will break userland. Short answer: Yes
and no. Long answer: It will "break" only for code that calls ...
{ BPF_LD | BPF_(W|H|B) | BPF_ABS, 0, 0, <K> },
... where <K> is in [0xfffff000, 0xffffffff] _and_ <K> is *not* an
ancillary. And here comes the BUT: assuming some *old* code will have
such an instruction where <K> is between [0xfffff000, 0xffffffff] and
it doesn't know ancillary operations, then this will give a
non-expected / unwanted behavior as well (since we do not return the
BPF machine with 0 after a failed load_pointer(), which was the case
before introducing ancillary operations, but load sth. into the
accumulator instead, and continue with the next instruction, for
instance). Thus, user space code would already have been broken by
introducing ancillary operations into the BPF machine per se. Code
that does such a direct load, e.g. "load word at packet offset
0xffffffff into accumulator" ("ld [0xffffffff]") is quite broken,
isn't it? The whole assumption of ancillary operations is that no-one
intentionally calls things like "ld [0xffffffff]" and expect this
word to be loaded from such a packet offset. Hence, we can also safely
make use of this feature testing patch and facilitate application
development. Therefore, at least from this patch onwards, we have
*for sure* a check whether current or in future implemented BPF_S_ANC*
ops are supported in the kernel. Patch was tested on x86_64.
(Thanks to Eric for the previous review.)
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Ani Sinha <ani@aristanetworks.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 28 Dec 2012 18:24:28 +0000 (18:24 +0000)]
skbuff: make __kmalloc_reserve static
Sparse detected case where this local function should be static.
It may even allow some compiler optimizations.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 28 Dec 2012 18:20:24 +0000 (18:20 +0000)]
tcp: make proc_tcp_fastopen_key static
Detected by sparse.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 28 Dec 2012 18:18:55 +0000 (18:18 +0000)]
sctp: make sctp_addr_wq_timeout_handler static
Fix sparse warning about local function that should be static.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Dec 2012 06:06:37 +0000 (06:06 +0000)]
net: use per task frag allocator in skb_append_datato_frags
Use the new per task frag allocator in skb_append_datato_frags(),
to reduce number of frags and page allocator overhead.
Tested:
ifconfig lo mtu 16436
perf record netperf -t UDP_STREAM ; perf report
before :
Throughput: 32928 Mbit/s
51.79% netperf [kernel.kallsyms] [k] copy_user_generic_string
5.98% netperf [kernel.kallsyms] [k] __alloc_pages_nodemask
5.58% netperf [kernel.kallsyms] [k] get_page_from_freelist
5.01% netperf [kernel.kallsyms] [k] __rmqueue
3.74% netperf [kernel.kallsyms] [k] skb_append_datato_frags
1.87% netperf [kernel.kallsyms] [k] prep_new_page
1.42% netperf [kernel.kallsyms] [k] next_zones_zonelist
1.28% netperf [kernel.kallsyms] [k] __inc_zone_state
1.26% netperf [kernel.kallsyms] [k] alloc_pages_current
0.78% netperf [kernel.kallsyms] [k] sock_alloc_send_pskb
0.74% netperf [kernel.kallsyms] [k] udp_sendmsg
0.72% netperf [kernel.kallsyms] [k] zone_watermark_ok
0.68% netperf [kernel.kallsyms] [k] __cpuset_node_allowed_softwall
0.67% netperf [kernel.kallsyms] [k] fib_table_lookup
0.60% netperf [kernel.kallsyms] [k] memcpy_fromiovecend
0.55% netperf [kernel.kallsyms] [k] __udp4_lib_lookup
after:
Throughput: 47185 Mbit/s
61.74% netperf [kernel.kallsyms] [k] copy_user_generic_string
2.07% netperf [kernel.kallsyms] [k] prep_new_page
1.98% netperf [kernel.kallsyms] [k] skb_append_datato_frags
1.02% netperf [kernel.kallsyms] [k] sock_alloc_send_pskb
0.97% netperf [kernel.kallsyms] [k] enqueue_task_fair
0.97% netperf [kernel.kallsyms] [k] udp_sendmsg
0.91% netperf [kernel.kallsyms] [k] __ip_route_output_key
0.88% netperf [kernel.kallsyms] [k] __netif_receive_skb
0.87% netperf [kernel.kallsyms] [k] fib_table_lookup
0.85% netperf [kernel.kallsyms] [k] resched_task
0.78% netperf [kernel.kallsyms] [k] __udp4_lib_lookup
0.77% netperf [kernel.kallsyms] [k] _raw_spin_lock_irqsave
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 27 Dec 2012 23:49:40 +0000 (23:49 +0000)]
dummy: implement carrier change
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 27 Dec 2012 23:49:39 +0000 (23:49 +0000)]
rtnl: expose carrier value with possibility to set it
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 27 Dec 2012 23:49:38 +0000 (23:49 +0000)]
net: allow to change carrier via sysfs
Make carrier writable
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 27 Dec 2012 23:49:37 +0000 (23:49 +0000)]
net: add change_carrier netdev op
This allows a driver to register change_carrier callback which will be
called whenever user will like to change carrier state. This is useful
for devices like dummy, gre, team and so on.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Levin [Thu, 20 Dec 2012 09:11:24 +0000 (09:11 +0000)]
bnx2x: use ARRAY_SIZE where possible
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 27 Dec 2012 18:46:47 +0000 (10:46 -0800)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Report i2c errors to userspace in lm73 driver
- Fix problem with DIV_ROUND_CLOSEST and unsigned divisors in emc6w201
driver
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (emc6w201) Fix DIV_ROUND_CLOSEST problem with unsigned divisors
hwmon: (lm73} Detect and report i2c bus errors
Linus Torvalds [Thu, 27 Dec 2012 18:42:46 +0000 (10:42 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull namespace fixes from Eric Biederman:
"This tree includes two bug fixes for problems Oleg spotted on his
review of the recent pid namespace work. A small fix to not enable
bottom halves with irqs disabled, and a trivial build fix for f2fs
with user namespaces enabled."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
f2fs: Don't assign e_id in f2fs_acl_from_disk
proc: Allow proc_free_inum to be called from any context
pidns: Stop pid allocation when init dies
pidns: Outlaw thread creation after unshare(CLONE_NEWPID)
Linus Torvalds [Thu, 27 Dec 2012 18:40:30 +0000 (10:40 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) GRE tunnel drivers don't set the transport header properly, they also
blindly deref the inner protocol ipv4 and needs some checks. Fixes
from Isaku Yamahata.
2) Fix sleeps while atomic in netdevice rename code, from Eric Dumazet.
3) Fix double-spinlock in solos-pci driver, from Dan Carpenter.
4) More ARP bug fixes. Fix lockdep splat in arp_solicit() and then the
bug accidentally added by that fix. From Eric Dumazet and Cong Wang.
5) Remove some __dev* annotations that slipped back in, as well as all
HOTPLUG references. From Greg KH
6) RDS protocol uses wrong interfaces to access scatter-gather elements,
causing a regression. From Mike Marciniszyn.
7) Fix build error in cpts driver, from Richard Cochran.
8) Fix arithmetic in packet scheduler, from Stefan Hasko.
9) Similarly, fix association during calculation of random backoff in
batman-adv. From Akinobu Mita.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
ipv6/ip6_gre: set transport header correctly
ipv4/ip_gre: set transport header correctly to gre header
IB/rds: suppress incompatible protocol when version is known
IB/rds: Correct ib_api use with gs_dma_address/sg_dma_len
net/vxlan: Use the underlying device index when joining/leaving multicast groups
tcp: should drop incoming frames without ACK flag set
netprio_cgroup: define sk_cgrp_prioidx only if NETPRIO_CGROUP is enabled
cpts: fix a run time warn_on.
cpts: fix build error by removing useless code.
batman-adv: fix random jitter calculation
arp: fix a regression in arp_solicit()
net: sched: integer overflow fix
CONFIG_HOTPLUG removal from networking core
Drivers: network: more __dev* removal
bridge: call br_netpoll_disable in br_add_if
ipv4: arp: fix a lockdep splat in arp_solicit()
tuntap: dont use a private kmem_cache
net: devnet_rename_seq should be a seqcount
ip_gre: fix possible use after free
ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally
...
Isaku Yamahata [Mon, 24 Dec 2012 16:51:04 +0000 (16:51 +0000)]
ipv6/ip6_gre: set transport header correctly
ip6gre_xmit2() incorrectly sets transport header to inner payload
instead of GRE header. It seems copy-and-pasted from ipip.c.
Set transport header to gre header.
(In ipip case the transport header is the inner ip header, so that's
correct.)
Found by inspection. In practice the incorrect transport header
doesn't matter because the skb usually is sent to another net_device
or socket, so the transport header isn't referenced.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Isaku Yamahata [Mon, 24 Dec 2012 16:51:03 +0000 (16:51 +0000)]
ipv4/ip_gre: set transport header correctly to gre header
ipgre_tunnel_xmit() incorrectly sets transport header to inner payload
instead of GRE header. It seems copy-and-pasted from ipip.c.
So set transport header to gre header.
(In ipip case the transport header is the inner ip header, so that's
correct.)
Found by inspection. In practice the incorrect transport header
doesn't matter because the skb usually is sent to another net_device
or socket, so the transport header isn't referenced.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marciniszyn, Mike [Fri, 21 Dec 2012 08:01:54 +0000 (08:01 +0000)]
IB/rds: suppress incompatible protocol when version is known
Add an else to only print the incompatible protocol message
when version hasn't been established.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marciniszyn, Mike [Fri, 21 Dec 2012 08:01:49 +0000 (08:01 +0000)]
IB/rds: Correct ib_api use with gs_dma_address/sg_dma_len
0b088e00 ("RDS: Use page_remainder_alloc() for recv bufs")
added uses of sg_dma_len() and sg_dma_address(). This makes
RDS DOA with the qib driver.
IB ulps should use ib_sg_dma_len() and ib_sg_dma_address
respectively since some HCAs overload ib_sg_dma* operations.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yan Burman [Thu, 20 Dec 2012 03:36:08 +0000 (03:36 +0000)]
net/vxlan: Use the underlying device index when joining/leaving multicast groups
The socket calls from vxlan to join/leave multicast group aren't
using the index of the underlying device, as a result the stack uses
the first interface that is up. This results in vxlan being non functional
over a device which isn't the 1st to be up.
Fix this by providing the iflink field to the vxlan instance
to the multicast calls.
Signed-off-by: Yan Burman <yanb@mellanox.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 26 Dec 2012 12:44:34 +0000 (12:44 +0000)]
tcp: should drop incoming frames without ACK flag set
In commit
96e0bf4b5193d (tcp: Discard segments that ack data not yet
sent) John Dykstra enforced a check against ack sequences.
In commit
354e4aa391ed5 (tcp: RFC 5961 5.2 Blind Data Injection Attack
Mitigation) I added more safety tests.
But we missed fact that these tests are not performed if ACK bit is
not set.
RFC 793 3.9 mandates TCP should drop a frame without ACK flag set.
" fifth check the ACK field,
if the ACK bit is off drop the segment and return"
Not doing so permits an attacker to only guess an acceptable sequence
number, evading stronger checks.
Many thanks to Zhiyun Qian for bringing this issue to our attention.
See :
http://web.eecs.umich.edu/~zhiyunq/pub/ccs12_TCP_sequence_number_inference.pdf
Reported-by: Zhiyun Qian <zhiyunq@umich.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nandita Dukkipati <nanditad@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: John Dykstra <john.dykstra1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoffer Dall [Fri, 21 Dec 2012 18:03:50 +0000 (13:03 -0500)]
mm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDED
Unfortunately with !CONFIG_PAGEFLAGS_EXTENDED, (!PageHead) is false, and
(PageHead) is true, for tail pages. If this is indeed the intended
behavior, which I doubt because it breaks cache cleaning on some ARM
systems, then the nomenclature is highly problematic.
This patch makes sure PageHead is only true for head pages and PageTail
is only true for tail pages, and neither is true for non-compound pages.
[ This buglet seems ancient - seems to have been introduced back in Apr
2008 in commit
6a1e7f777f61: "pageflags: convert to the use of new
macros". And the reason nobody noticed is because the PageHead()
tests are almost all about just sanity-checking, and only used on
pages that are actual page heads. The fact that the old code returned
true for tail pages too was thus not really noticeable. - Linus ]
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Will Deacon <Will.Deacon@arm.com>
Cc: Steve Capper <Steve.Capper@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: stable@kernel.org # 2.6.26+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Tue, 25 Dec 2012 20:48:24 +0000 (20:48 +0000)]
netprio_cgroup: define sk_cgrp_prioidx only if NETPRIO_CGROUP is enabled
sock->sk_cgrp_prioidx won't be used at all if CONFIG_NETPRIO_CGROUP=n.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 23 Dec 2012 21:19:10 +0000 (21:19 +0000)]
cpts: fix a run time warn_on.
This patch fixes a warning in clk_enable by calling clk_prepare_enable
instead.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 23 Dec 2012 21:19:09 +0000 (21:19 +0000)]
cpts: fix build error by removing useless code.
The cpts driver tries to obtain the input clock frequency by calling the
clock's internal 'recalc' method. Since <plat/clock.h> has been removed,
this code can no longer compile.
However, the driver never makes use of the frequency value, so this patch
fixes the issue by removing the offending code altogether.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Akinobu Mita [Wed, 26 Dec 2012 02:32:10 +0000 (02:32 +0000)]
batman-adv: fix random jitter calculation
batadv_iv_ogm_emit_send_time() attempts to calculates a random integer
in the range of 'orig_interval +- BATADV_JITTER' by the below lines.
msecs = atomic_read(&bat_priv->orig_interval) - BATADV_JITTER;
msecs += (random32() % 2 * BATADV_JITTER);
But it actually gets 'orig_interval' or 'orig_interval - BATADV_JITTER'
because '%' and '*' have same precedence and associativity is
left-to-right.
This adds the parentheses at the appropriate position so that it matches
original intension.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Cc: Marek Lindner <lindner_marek@yahoo.de>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Antonio Quartulli <ordex@autistici.org>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric W. Biederman [Sat, 22 Dec 2012 09:52:39 +0000 (01:52 -0800)]
f2fs: Don't assign e_id in f2fs_acl_from_disk
With user namespaces enabled building f2fs fails with:
CC fs/f2fs/acl.o
fs/f2fs/acl.c: In function ‘f2fs_acl_from_disk’:
fs/f2fs/acl.c:85:21: error: ‘struct posix_acl_entry’ has no member named ‘e_id’
make[2]: *** [fs/f2fs/acl.o] Error 1
make[2]: Target `__build' not remade because of errors.
e_id is a backwards compatibility field only used for file systems
that haven't been converted to use kuids and kgids. When the posix
acl tag field is neither ACL_USER nor ACL_GROUP assigning e_id is
unnecessary. Remove the assignment so f2fs will build with user
namespaces enabled.
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This page took 0.047032 seconds and 5 git commands to generate.