Tom Tromey [Thu, 29 Oct 2020 21:04:33 +0000 (15:04 -0600)]
Change exec_close to be a method on program_space
exec_close uses the current program space, so it seemed cleaner to
change it to be a method on program_space. This patch makes this
change.
gdb/ChangeLog
2020-10-29 Tom Tromey <tom@tromey.com>
* progspace.c (program_space::exec_close): New method, from
exec_close in exec.c.
* exec.c (exec_close): Move to progspace.c.
(exec_target::close, exec_file_attach): Update.
* progspace.h (struct program_space) <exec_close>: Declare
method.
Tom Tromey [Thu, 29 Oct 2020 21:04:33 +0000 (15:04 -0600)]
Remove exec_filename macro
This removes the exec_filename macro, replacing it with uses of the
member of current_program_space. This also renames that member, and
changes it to be a unique pointer.
gdb/ChangeLog
2020-10-29 Tom Tromey <tom@tromey.com>
* progspace.h (struct program_space) <exec_filename>: Rename from
pspace_exec_filename. Now a unique_xmalloc_ptr.
* inferior.c (print_selected_inferior): Update.
(print_inferior): Update.
* mi/mi-main.c (print_one_inferior): Update.
* exec.h (exec_filename): Remove macro.
* corefile.c (get_exec_file): Update.
* exec.c (exec_close): Update.
(exec_file_attach): Update.
* progspace.c (clone_program_space): Update.
(print_program_space): Update.
Tom Tromey [Thu, 29 Oct 2020 21:04:33 +0000 (15:04 -0600)]
Add target_section constructor
This adds a constructor to target_section, simplifying the code that
creates instances of this.
gdb/ChangeLog
2020-10-29 Tom Tromey <tom@tromey.com>
* target-section.h (struct target_section): Add constructor.
* exec.c (build_section_table, add_target_sections_of_objfile):
Update.
* corelow.c (core_target::build_file_mappings): Update.
Nick Clifton [Thu, 29 Oct 2020 20:13:00 +0000 (20:13 +0000)]
Fix an illegal memory access problem when processing secondary relocs for architectures which support both REL and RELA relocs.
PR 26809
* elf.c (_bfd_elf_slurp_secondary_reloc_section): Use the correct
sized reloc reading function.
(_bfd_elf_write_secondary_reloc_section): Use the correct sized
reloc writing function.
Przemyslaw Wirkus [Thu, 29 Oct 2020 16:30:46 +0000 (16:30 +0000)]
aarch64: Fix DSB instruction 'missing immediate expression' errors
This patch fixes errors with DSB instruction after introduction of DSB nXS
variant. That change would cause GAS to reject valid DSB immediate string
operands.
gas/ChangeLog:
2020-10-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/tc-aarch64.c (parse_operands): Check for C0-C15 value of DSB
immediate string operand.
* testsuite/gas/aarch64/system-4.d: Update test.
* testsuite/gas/aarch64/system-4.s: Update test.
H.J. Lu [Thu, 29 Oct 2020 16:19:25 +0000 (09:19 -0700)]
dwarf: Also match abbrev base when searching abbrev list
A .debug_abbrev section can have multiple CUs. When caching abbrev list,
we need to check abbrev base to support multiple CUs.
PR binutils/26808
* dwarf.c (abbrev_list): Add abbrev_base.
(new_abbrev_list): Add an abbrev_base argument and record it.
(find_abbrev_list_by_abbrev_offset): Add an abbrev_base argument
and match it.
(process_debug_info): Pass abbrev_base to new_abbrev_list and
find_abbrev_list_by_abbrev_offset.
(display_debug_abbrev): Pass 0 abbrev_base to new_abbrev_list
and find_abbrev_list_by_abbrev_offset.
* testsuite/binutils-all/x86-64/pr26808.dump: New file.
* testsuite/binutils-all/x86-64/pr26808.dwp.bz2: Likewise.
* testsuite/binutils-all/x86-64/x86-64.exp: Run PR binutils/26808
test.
Tankut Baris Aktemur [Thu, 29 Oct 2020 14:33:39 +0000 (15:33 +0100)]
gdb: restore thread after detaching or killing an inferior
The "detach inferiors N" command causes the current inferior to
switch. E.g.:
$ gdb a.out
Reading symbols from a.out...
(gdb) start
...
(gdb) add-inferior
[New inferior 2]
Added inferior 2 on connection 1 (native)
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Connection Executable
1 process 18242 1 (native) /path/to/a.out
* 2 <null> 1 (native)
(gdb) detach inferiors 1
Detaching from program: /path/to/a.out, process 18242
[Inferior 1 (process 18242) detached]
(gdb) info inferiors
Num Description Connection Executable
* 1 <null> /path/to/a.out
2 <null> 1 (native)
(gdb)
The same switch happens with the "kill inferiors N" command. Prevent
it by restoring the current thread.
gdb/ChangeLog:
2020-10-29 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
PR gdb/19318
* inferior.c (detach_inferior_command): Restore the current thread.
(kill_inferior_command): Ditto.
gdb/testsuite/ChangeLog:
2020-10-29 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.base/kill-detach-inferiors-cmd.exp: Check that 'kill
inferiors' and 'detach inferiors' do not change the current
inferior.
Nick Clifton [Thu, 29 Oct 2020 11:17:39 +0000 (11:17 +0000)]
Fix a potential illegal memory access by objcopy when extracting dwo sections.
PR 26805
* objcopy.c (is_dwo_section): Check for missing or short section
names.
Tom de Vries [Thu, 29 Oct 2020 06:55:46 +0000 (07:55 +0100)]
[gdb/testsuite] Fix DUPLICATEs in gdb.threads/tls.exp
With test-case gdb.threads/tls.exp, we get these:
...
DUPLICATE: gdb.threads/tls.exp: selected thread: 4
DUPLICATE: gdb.threads/tls.exp: selected thread: 2
DUPLICATE: gdb.threads/tls.exp: selected thread: 3
...
Fix these using with_test_prefix.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-29 Tom de Vries <tdevries@suse.de>
* gdb.threads/tls.exp: Fix DUPLICATEs.
GDB Administrator [Thu, 29 Oct 2020 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom de Vries [Wed, 28 Oct 2020 20:04:12 +0000 (21:04 +0100)]
[gdb/testsuite] Fix gdb.python/py-symbol.exp with -readnow
When running test-case gdb.python/py-symbol.exp with target board readnow, we
get:
...
FAIL: gdb.python/py-symbol.exp: print line number of rr
FAIL: gdb.python/py-symbol.exp: print value of rr
...
These are FAILs due to PR25857.
Mark these FAILs as KFAILs.
gdb/testsuite/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
* gdb.python/py-symbol.exp: Add KFAILs for -readnow.
Tom de Vries [Wed, 28 Oct 2020 20:04:12 +0000 (21:04 +0100)]
[gdb/testsuite] Fix re-read FAILs with -readnow
When running the testsuite with target board readnow, we run into:
...
FAIL: gdb.ada/exec_changed.exp: start second
FAIL: gdb.ada/exec_changed.exp: start just first
FAIL: gdb.base/reread.exp: opts= "" "" : run to foo() second time
FAIL: gdb.base/reread.exp: opts= "" "" : second pass: run to foo() second time
FAIL: gdb.base/reread.exp: opts= "-fPIE" "ldflags=-pie" : \
run to foo() second time
FAIL: gdb.base/reread.exp: opts= "-fPIE" "ldflags=-pie" : second pass: \
run to foo() second time
...
These are FAILs due to PR26800.
Mark these as KFAILs.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
* gdb.ada/exec_changed.exp: Add KFAILs for -readnow.
* gdb.base/reread.exp: Same.
Tom de Vries [Wed, 28 Oct 2020 20:04:12 +0000 (21:04 +0100)]
[gdb/testsuite] Fix gdb.rust/traits.exp with -readnow
With test-case gdb.rust/traits.exp and target board readnow we get:
...
FAIL: gdb.rust/traits.exp: print *td
FAIL: gdb.rust/traits.exp: print *tu
...
Mark these FAILs as KFAILs.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (readnow): Handle arg.
* gdb.rust/traits.exp: Add KFAILs for -readnow.
Tom de Vries [Wed, 28 Oct 2020 20:04:12 +0000 (21:04 +0100)]
[gdb/testsuite] Fix gdb.base/relocate.exp with -readnow
With test-case gdb.base/relocate.exp and target board readnow, we get:
...
FAIL: gdb.base/relocate.exp: symbol-file with offset
FAIL: gdb.base/relocate.exp: add-symbol-file with offset
FAIL: gdb.base/relocate.exp: add-symbol-file with offset, text address given
FAIL: gdb.base/relocate.exp: add-symbol-file with offset, data address given
...
Fix these FAILs by updating the regexps for -readnow.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
* gdb.base/relocate.exp: Update regexp for -readnow.
Tom de Vries [Wed, 28 Oct 2020 20:04:12 +0000 (21:04 +0100)]
[gdb/testsuite] Fix gdb.dwarf2/dw2-error.exp with -readnow
With test-case gdb.dwarf2/dw2-error.exp and target board readnow, we get:
...
FAIL: gdb.dwarf2/dw2-error.exp: break -q main
...
In the normal case, after running into the dwarf error, the minimal symbols
are still available, but with -readnow this is not the case.
Mark the FAIL as KFAIL.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-error.exp: Mark failure break in main as known with
-readnow.
Tom de Vries [Wed, 28 Oct 2020 20:04:12 +0000 (21:04 +0100)]
[gdb/symtab] Fix language of frame without debug info
On openSUSE Leap 15.2, I run into this FAIL with target board readnow and
test-case gdb.dwarf2/dw2-align.exp:
...
(gdb) set lang c++^M
Warning: the current language does not match this frame.^M
(gdb) FAIL: gdb.dwarf2/dw2-align.exp: set lang c++
...
Adding some extra debugging shows that the current language differs without
and with readnow:
...
Breakpoint 1, 0x00000000004004ab in main ()^M
(gdb) show lang^M
-The current source language is "auto; currently c".^M
+The current source language is "auto; currently asm".^M
...
This is explained by find_pc_compunit_symtab (0x4004ab) called from
select_frame, which:
- without readnow: returns NULL, and
- with readnow: returns the symtab for the CU crtn.S, wich has language
"MIPS assembler".
In the former case, the symtab for crtn.S is not expanded, and
find_pc_compunit_symtab hits the default NULL return. In the latter case, the
symtab for crtn.S is expanded, and the "best match" loop in
find_pc_compunit_symtab returns that symtab as its best match.
The GLOBAL_BLOCK for crtn.S has these outer limits of the address range:
...
(gdb) p /x b.startaddr
$6 = 0x4003c2
(gdb) p /x b.endaddr
$7 = 0x40053d
...
and 0x4004ab indeed fits in that range, which explains why the CU is
considered a match.
However, the actual address ranges for the CU are:
...
00000040 ffffffffffffffff 0000000000000000 (base address)
00000040 00000000004003c2 00000000004003c7
00000040 0000000000400538 000000000040053d
00000040 <End of list>
...
which confirms that the CU should not be considered a match.
The problem is that the "best match" loop is based on the assumption that a
symtab with a better match will be found, but in this case we don't find a
better match because there's no debug info describing main.
Fix this by preferring to use the addres map in the "best match" loop, which
will accurately tell us that addrmap_find (bv.map, 0x4004ab) == NULL.
Tested on x86_64-linux (that is, openSUSE Leap 15.2), with and without
readnow. In the case of a readnow run, brings down the number of unexpected
failures from 66 to 38.
The FAIL does not reproduce on f.i. Ubuntu 18.04.5, because there the exec
does not contain debug info for crtn.S. The dwarf assembly test-case mimics
the scenario described above, and reproduces the FAIL with and without
-readnow, for both mentioned OS configurations.
Also fixes PR25980 - "Overlapping Dwarf Compile Units with non-overlapping
subranges gives incorrect line information".
gdb/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
PR symtab/26772
* symtab.c (find_pc_sect_compunit_symtab): In case there's an address
map, check it in the "best match" loop.
gdb/testsuite/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
PR symtab/26772
* gdb.dwarf2/dw2-ranges-overlap.c: New test.
* gdb.dwarf2/dw2-ranges-overlap.exp: New file.
Andreas Rammhold [Mon, 26 Oct 2020 03:03:29 +0000 (04:03 +0100)]
Use sha256 for hashes in the release process
I just came across the GDB 10.1 release notes and saw that md5 is still
being used in those. I thought it would be a good idea to instead have a
more modern, secure and wildly available hash function such as SHA256 as
part of the release process.
The changes have been done rather mechnically via sed but executing the
`src-release.sh -b gdb` did work so I am confident about the result.
While this does not directly address the release mails, I was wasn't
able to find the template/script used for those, this is probably still
an improvement.
ChangeLog:
* src-release.sh: Use sha256sum instead of md5sum.
binutils/ChangeLog:
* README-how-to-make-a-release: Use sha256sum instead of md5sum.
Change-Id: I9cf19ea40699137c45463b8514f6e29271af2347
Przemyslaw Wirkus [Wed, 28 Oct 2020 14:16:39 +0000 (14:16 +0000)]
aarch64: Add CSR PDEC instruction
This patch adds:
+ New feature +csre to -march command line.
+ New instruction CSR PDEC associated with CSRE feature.
Please note that CSRE system registers were already upstreamed. This patch
should finalize CSRE feature implementation.
CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size of
a Call stack record) instruction. Although this instruction has operand
(PDEC) it's instruction's only operand. PDEC forces instruction field Rt
to be set to 0b1111. This results in fixed opcode of the instruction.
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* config/tc-aarch64.c (parse_csr_operand): New operand parser.
(parse_operands): Call to CSR operand parser.
* testsuite/gas/aarch64/csre_csr-invalid.d: New test.
* testsuite/gas/aarch64/csre_csr-invalid.l: New test.
* testsuite/gas/aarch64/csre_csr-invalid.s: New test.
* testsuite/gas/aarch64/csre_csr.d: New test.
* testsuite/gas/aarch64/csre_csr.s: New test.
include/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CSRE): New -march feature.
(enum aarch64_opnd): New CSR instruction field AARCH64_OPND_CSRE_CSR.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out.
* aarch64-tbl.h (CSRE): New CSRE feature handler.
(_CSRE_INSN): New CSRE instruction type.
(struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
Przemyslaw Wirkus [Wed, 28 Oct 2020 14:09:25 +0000 (14:09 +0000)]
aarch64: Add WFET instruction for Armv8.7-a
This patch adds new to Armv8.7 WFET instruction which take one operand:
WFET <Xt>
Where:
<Xt> is 64-bit name of the general-purpose source register, encoded in the
"Rd" field.
For more details regarding WFET (Wait For Event with Timeout) instruction for
Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A
architecture profile, see document pages 565 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* testsuite/gas/aarch64/system-5.d: New test.
* testsuite/gas/aarch64/system-5.s: New test.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (struct aarch64_opcode): Add new WFET instruction encoding
and operand description.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
Przemyslaw Wirkus [Wed, 28 Oct 2020 14:01:36 +0000 (14:01 +0000)]
aarch64: Add DSB instruction Armv8.7-a variant
This patch adds new variant (nXS) of DSB memory barrier instruction
available in Armv8.7-a. New nXS variant has different encoding in
comparison with pre Armv8.7-a DSB memory barrier variant thus new
instruction and new operand was added.
DSB memory nXS barrier variant specifies the limitation on the barrier
operation. Allowed values are:
DSB SYnXS|#28
DSB ISHnXS|#24
DSB NSHnXS|#20
DSB OSHnXS|#16
Please note that till now, for barriers, barrier operation was encoded in
4-bit unsigned immediate CRm field (in the range 0 to 15).
For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned
assembly instruction immediate, encoded in instruction in two bits CRm<3:2>:
CRm<3:2> #imm
00 16
01 20
10 24
11 28
This patch extends current AArch64 barrier instructions with above mapping.
Notable patch changes include:
+ New DSB memory barrier variant encoding for Armv8.7-a.
+ New operand BARRIER_DSB_NXS for above instruction in order to
distinguish between existing and new DSB instruction flavour.
+ New set of DSB nXS barrier options.
+ New instruction inserter and extractor map between instruction
immediate 5-bit value and 2-bit CRm field of the instruction itself (see
FLD_CRm_dsb_nxs).
+ Regeneration of aarch64-[asm|dis|opc]-2.c files.
+ Test cases to cover new instruction assembling and disassembling.
For more details regarding DSB memory barrier instruction and its
Armv8.7-a flavour please refer to Arm A64 Instruction set documentation
for Armv8-A architecture profile, see document pages 132-133 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (parse_operands): Add
AARCH64_OPND_BARRIER_DSB_NXS handler.
(md_begin): Add content of aarch64_barrier_dsb_nxs_options to
aarch64_barrier_opt_hsh hash.
* testsuite/gas/aarch64/system-4-invalid.d: New test.
* testsuite/gas/aarch64/system-4-invalid.l: New test.
* testsuite/gas/aarch64/system-4-invalid.s: New test.
* testsuite/gas/aarch64/system-4.d: New test.
* testsuite/gas/aarch64/system-4.s: New test.
include/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_BARRIER_DSB_NXS.
(aarch64_barrier_dsb_nxs_options): Declare DSB nXS options.
opcodes/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter
ins_barrier_dsb_nx.
* aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor
ext_barrier_dsb_nx.
* aarch64-opc.c (aarch64_print_operand): New options table
aarch64_barrier_dsb_nxs_options.
* aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs.
* aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier
Armv8.7-a instruction.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
Przemyslaw Wirkus [Wed, 28 Oct 2020 13:58:17 +0000 (13:58 +0000)]
aarch64: Add basic support for armv8.7-a architecture
This patch adds support for AArch64 -march=armv8.7-a command line option
in GAS.
Please note that this change ONLY extends -march= command line interface
with a new "armv8.7-a" option. Architectural changes like new instructions
will be added in following patches.
gas/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (armv8.7-a): New arch.
* doc/c-aarch64.texi (-march=armv8.7-a): Update docs.
include/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_7): New feature bitmask.
(AARCH64_ARCH_V8_7): New arch feature set.
opcodes/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (ARMV8_7): New macro.
Nick Clifton [Wed, 28 Oct 2020 11:07:02 +0000 (11:07 +0000)]
Fix a potential illegal memory access when creating an srec format file.
PR 26774
* srec.c (srec_write_symbols): Do not emit symbols in sections
that have been removed from the output.
Nick Clifton [Wed, 28 Oct 2020 10:56:00 +0000 (10:56 +0000)]
Fix compile time warning building with gcc 11.
PR 26795
* elfedit.c (process_archive): Remove spurious call to free().
Tom de Vries [Wed, 28 Oct 2020 09:01:32 +0000 (10:01 +0100)]
[gdb/testsuite] Fix gdb.cp/nsalias.exp with -readnow
When running test-case gdb.cp/nsalias.exp with target board readnow, we get:
...
FAIL: gdb.cp/nsalias.exp: complaint for too many recursively imported \
declarations
...
The complaint is not detected, because:
- the complaint is triggered during the file command instead of during
"print N100::x"
- the "set complaints 1" is not effective because it's issued
after the file command
Fix the FAIL by setting the complaints limit earlier, and detecting the
complaint also during the file command.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_file_cmd): Set gdb_file_cmd_msg.
* gdb.cp/nsalias.exp: Set complaints limit before file cmd. Expect
complaint during file command for -readnow.
Tom de Vries [Wed, 28 Oct 2020 09:01:32 +0000 (10:01 +0100)]
[gdb/testsuite] Fix typo in gdb.cp/nsalias.exp
Fix typo "compaint" -> "complaint".
gdb/testsuite/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
* gdb.cp/nsalias.exp: Fix typo in test name.
Tom de Vries [Wed, 28 Oct 2020 09:01:32 +0000 (10:01 +0100)]
[gdb/testsuite] Fix gdb.dwarf2/dw2-filename.exp with -readnow
When running test-case gdb.dwarf2/dw2-filename.exp with target board -readnow,
we run into:
...
FAIL: gdb.dwarf2/dw2-filename.exp: info sources
...
The normal output is:
...
(gdb) info sources^M
Source files for which symbols have been read in:^M
^M
Source files for which symbols will be read in on demand:^M
^M
src/gdb/testsuite/gdb.dwarf2/file1.txt^M
(gdb)
...
but with -readnow file1.txt appears in the "Source files for which symbols
have been read in" catagory instead, as expected.
Fix the FAIL by making the regexp match the -readnow output.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-filename.exp: Update regexp for -readnow.
Tom de Vries [Wed, 28 Oct 2020 09:01:32 +0000 (10:01 +0100)]
[gdb/testsuite] Fix gdb.dwarf2/dw2-stack-boundary.exp with -readnow
When running test-case gdb.dwarf2/dw2-stack-boundary.exp with target board
readnow, we run into:
...
FAIL: gdb.dwarf2/dw2-stack-boundary.exp: check partial symtab errors
...
The cause for the FAIL is that these complaints are not there:
...
During symbol reading: location description stack underflow^M
During symbol reading: location description stack overflow^M
...
Fix this by KFAILing the complaints for -readnow.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-28 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-stack-boundary.exp: KFAILing the complaints for
-readnow.
GDB Administrator [Wed, 28 Oct 2020 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom de Vries [Tue, 27 Oct 2020 22:17:09 +0000 (23:17 +0100)]
[gdb/testsuite] Fix gdb.base/multi-forks.exp timeout with -readnow
When running test-case gdb.base/multi-forks.exp with target board readnow, we
run into:
...
FAIL: gdb.base/multi-forks.exp: run to exit 1 (timeout)
...
Fix this by using exp_continue.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-27 Tom de Vries <tdevries@suse.de>
* gdb.base/multi-forks.exp: Use exp_continue to fix timeout.
Tom de Vries [Tue, 27 Oct 2020 22:17:09 +0000 (23:17 +0100)]
[gdb/testsuite] Fix DUPLICATEs in gdb.base/multi-forks.exp
When running test-case gdb.base/multi-forks.exp I get:
...
DUPLICATE: gdb.base/multi-forks.exp: run to exit 2
DUPLICATE: gdb.base/multi-forks.exp: run to exit 2
...
Fix these by using test_with_prefix.
Tested on x86_64-linux.
Tom de Vries [Tue, 27 Oct 2020 22:17:09 +0000 (23:17 +0100)]
[gdb/testsuite] Fix gdb.base/maint.exp FAILs with -readnow
When running test-case gdb.base/maint.exp with target board readnow, we run
into:
...
FAIL: gdb.base/maint.exp: mt expand-symtabs
FAIL: gdb.base/maint.exp: maint print objfiles: psymtabs
FAIL: gdb.base/maint.exp: maint print psymbols -source
FAIL: gdb.base/maint.exp: maint print psymbols -pc
FAIL: gdb.base/maint.exp: maint info line-table with filename of symtab that \
is not currently expanded
...
When using -readnow:
- there are no partial symtabs
- all symtabs are expanded at symbol load time
and these differences from normal behaviour cause the FAILs.
Update the tests for -readnow.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-27 Tom de Vries <tdevries@suse.de>
* gdb.base/maint.exp: Update for -readnow.
Tom de Vries [Tue, 27 Oct 2020 22:17:09 +0000 (23:17 +0100)]
[gdb/testsuite] Fix gdb.cp/psymtab-parameter.exp with -readnow
When running test-case gdb.cp/psymtab-parameter.exp with target board readnow,
we run into:
...
FAIL: gdb.cp/psymtab-parameter.exp: maintenance info symtabs
...
The FAIL is expected, as mentioned in the comment:
...
# The goal is to keep the CU (Compilation Unit) unexpanded. It would be
# rather XFAIL than FAIL here. For example -readnow breaks it.
gdb_test_no_output "maintenance info symtabs"
...
Fix the FAIL by skipping the command for -readnow.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-27 Tom de Vries <tdevries@suse.de>
* gdb.cp/psymtab-parameter.exp: Don't expect unexpanded CU for
-readnow.
Gary Benson [Tue, 27 Oct 2020 17:02:39 +0000 (17:02 +0000)]
Fix gdb.python/py-format-string.exp with Clang
GDB includes the virtual table pointer when formatting polymorphic
C++ objects for printing, but GCC and Clang name these differently:
GCC emits a DW_AT_name of "_vptr.Base" when describing the virtual
table pointer of a type derived from type "Base", whereas Clang
will emit "_vptr$Base" in this situation. This commit fixes a
testcase which failed because of this.
gdb/testsuite/ChangeLog:
* gdb.python/py-format-string.exp (test_deref_refs): Treat
"_vptr$Base" as correct, in addition to "_vptr.Base".
(test_mixed): Likewise.
Gary Benson [Tue, 27 Oct 2020 16:54:38 +0000 (16:54 +0000)]
Add skip_fortran_tests to two Fortran testcases
This commit adds missing skip_fortran_tests checks to two Fortran
testcases that did not have it. It also fixes a copy-paste error
in a comment.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-fortran-modules.exp: Check skip_fortran_tests.
* gdb.mi/mi-vla-fortran.exp: Likewise. Also fix a comment.
Nick Clifton [Tue, 27 Oct 2020 16:23:09 +0000 (16:23 +0000)]
Fix seg-fault when running the ld testsuite for the hppa64-linux target.
* elf64-hppa.c (elf_hppa_final_link_relocate): Check that the
symbol's section is being output before adding its offset to the
addend when processing R_PARISC_SECREL32.
Nick Clifton [Tue, 27 Oct 2020 16:17:13 +0000 (16:17 +0000)]
Fix the decoding of DW_FORM_ref_addr DWARF attribute.
* dwarf.c (struct abbrev_list): New structure. Used to collect
lists of abbreviation sets.
(struct abbrev_map): New structure. Used to map CU offsets to
abbreviation offsets.
(record_abbrev_list): New function. A new entry to an
abbreviation list.
(free_all_abbrevs): Update to free abbreviation lists.
(new_abbrev_list): New function. Start a new abbreviation
list.
(find_abbrev_list_by_abbrev_offset): New function.
(find_abbrev_map_by_offset): New function.
(add_abbrev): Add abbrev_list parameter.
(add_abbrev_attr): Likewise.
(process_abbrev_section): Rename to process_abbrev_set and add
list parameter.
(get_type_abbrev_from_form): New function. Attempts to decode the
forms used by DW_AT_type attributes.
(get_type_signedness): Display type names if operating in wide
mode. Use get_type_abbrev_from_form.
(read_and_display_attr_value): Use get_type_abbrev_from_form.
(process_debug_info): Pre-parse the CU headers to collate all the
abbrevs before starting the main scan.
(process_debug_abbrev): Do not free any loaded abbrevs.
(free_debug_memory): Free the abbrev maps.
Simon Marchi [Tue, 27 Oct 2020 14:37:58 +0000 (10:37 -0400)]
gdb: remove unused includes in m32c-tdep.c
include-what-you-use says:
../../../src/binutils-gdb/gdb/m32c-tdep.c should remove these lines:
- #include "dis-asm.h" // lines 24-24
- #include "dwarf2/expr.h" // lines 31-31
- #include "dwarf2/frame.h" // lines 30-30
- #include "elf-bfd.h" // lines 21-21
- #include "elf/m32c.h" // lines 22-22
- #include "target.h" // lines 37-37
- struct m32c_reg; // lines 45-45
That looks right, remove them. Tested by rebuilding.
gdb/ChangeLog:
* m32c-tdep.c: Remove unused includes.
Change-Id: I28b41795f3bcc5406488dbf272c9e86fd5781b6b
Simon Marchi [Tue, 27 Oct 2020 14:28:27 +0000 (10:28 -0400)]
gdb: remove unused includes in xtensa-tdep.c
include-what-you-use says that these includes are not necessary in
xtensa-tdep.c:
../../../src/binutils-gdb/gdb/xtensa-tdep.c should remove these lines:
- #include "dis-asm.h" // lines 29-29
- #include "dummy-frame.h" // lines 36-36
- #include "dwarf2.h" // lines 37-37
- #include "dwarf2/loc.h" // lines 39-39
- #include "inferior.h" // lines 30-30
- #include "objfiles.h" // lines 25-25
- #include "remote.h" // lines 45-45
- #include "serial.h" // lines 46-46
- #include "symfile.h" // lines 24-24
That looks about right, so remove them. Tested by re-building.
gdb/ChangeLog:
* xtensa-tdep.c: Remove includes.
Change-Id: I9774ec59a68dd94e06967713d2f271b1760f6e6a
Tankut Baris Aktemur [Tue, 27 Oct 2020 09:56:03 +0000 (10:56 +0100)]
gdb/breakpoint: use gdb::option for the '-force' flag
Use the gdb::option framework for the '-force' flag of the 'condition'
command. This gives tab-completion ability for the flag.
gdb/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* breakpoint.c (struct condition_command_opts): New struct.
(condition_command_option_defs): New static global.
(make_condition_command_options_def_group): New function.
(condition_completer): Update to consider the '-force' flag.
(condition_command): Use gdb::option for the '-force' flag.
gdb/testsuite/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.base/condbreak.exp: Update the completion tests to
consider the '-force' flag.
Tom de Vries [Tue, 27 Oct 2020 12:28:27 +0000 (13:28 +0100)]
[gdb/testsuite] Fix section matching in find_pc_sect_compunit_symtab
When running test-case gdb.base/list-ambiguous.exp with target board readnow,
we run into:
...
FAIL: gdb.base/list-ambiguous.exp: list ambiguous_fun
...
The test-case contains two static functions ambiguous_fun, one in
list-ambiguous0.c and one in list-ambiguous1.c.
The list command is supposed to show both, but only the one from
list-ambiguous0.c is shown.
This is due to the section check in find_pc_sect_compunit_symtab. It checks
whether the candidate compunit_symtab contains a symbol that has the required
section. This check is only done for GLOBAL_BLOCK symbols.
The check succeeds for the compunit_symtab for list-ambiguous0.c, because it
contains main, but it fails for list-ambiguous0.c because it has no global
symbols.
Fix this by extending the section check to STATIC_BLOCK symbols.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-10-27 Tom de Vries <tdevries@suse.de>
* symtab.c (find_pc_sect_compunit_symtab): Include STATIC_BLOCK
symbols in section check.
gdb/testsuite/ChangeLog:
2020-10-27 Tom de Vries <tdevries@suse.de>
* gdb.base/list-ambiguous-readnow.exp: New file.
Tom de Vries [Tue, 27 Oct 2020 12:28:27 +0000 (13:28 +0100)]
[gdb/symtab] Use early continue in find_pc_sect_compunit_symtab
Function find_pc_sect_compunit_symtab contains a loop:
...
for (compunit_symtab *cust : obj_file->compunits ())
{
...
if (...)
{
/* Lots of code. */
}
}
...
Reduce indentation level and improve readability by using early continue.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-10-27 Tom de Vries <tdevries@suse.de>
* symtab.c (find_pc_sect_compunit_symtab): Use early continue.
Tankut Baris Aktemur [Tue, 27 Oct 2020 09:56:03 +0000 (10:56 +0100)]
gdb/breakpoint: add flags to 'condition' and 'break' commands to force condition
The previous patch made it possible to define a condition if it's
valid at some locations. If the condition is invalid at all of the
locations, it's rejected. However, there may be cases where the user
knows the condition *will* be valid at a location in the future,
e.g. due to a shared library load.
To make it possible that such condition can be defined, this patch
adds an optional '-force' flag to the 'condition' command, and,
respectively, a '-force-condition' flag to the 'break'command. When
the force flag is passed, the condition is not rejected even when it
is invalid for all the current locations (note that all the locations
would be internally disabled in this case).
For instance:
(gdb) break test.c:5
Breakpoint 1 at 0x1155: file test.c, line 5.
(gdb) cond 1 foo == 42
No symbol "foo" in current context.
Defining the condition was not possible because 'foo' is not
available. The user can override this behavior with the '-force'
flag:
(gdb) cond -force 1 foo == 42
warning: failed to validate condition at location 1.1, disabling:
No symbol "foo" in current context.
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
stop only if foo == 42
1.1 N 0x0000000000001155 in main at test.c:5
Now the condition is accepted, but the location is automatically
disabled. If a future location has a context in which 'foo' is
available, that location would be enabled.
For the 'break' command, -force-condition has the same result:
(gdb) break test.c:5 -force-condition if foo == 42
warning: failed to validate condition at location 0x1169, disabling:
No symbol "foo" in current context.
Breakpoint 1 at 0x1169: file test.c, line 5.
gdb/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* breakpoint.h (set_breakpoint_condition): Add a new bool parameter.
* breakpoint.c: Update the help text of the 'condition' and 'break'
commands.
(set_breakpoint_condition): Take a new bool parameter
to control whether condition definition should be forced even when
the condition expression is invalid in all of the current locations.
(condition_command): Update the call to 'set_breakpoint_condition'.
(find_condition_and_thread): Take the "-force-condition" flag into
account.
* linespec.c (linespec_keywords): Add "-force-condition" as an
element.
(FORCE_KEYWORD_INDEX): New #define.
(linespec_lexer_lex_keyword): Update to consider "-force-condition"
as a keyword.
* ada-lang.c (create_ada_exception_catchpoint): Ditto.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_condition_x): Ditto.
* python/py-breakpoint.c (bppy_set_condition): Ditto.
* NEWS: Mention the changes to the 'break' and 'condition' commands.
gdb/testsuite/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.base/condbreak-multi-context.exp: Expand to test forcing
the condition.
* gdb.linespec/cpcompletion.exp: Update to consider the
'-force-condition' keyword.
* gdb.linespec/explicit.exp: Ditto.
* lib/completion-support.exp: Ditto.
gdb/doc/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.texinfo (Set Breaks): Document the '-force-condition' flag
of the 'break'command.
* gdb.texinfo (Conditions): Document the '-force' flag of the
'condition' command.
Tankut Baris Aktemur [Tue, 27 Oct 2020 09:56:03 +0000 (10:56 +0100)]
gdb/breakpoint: disable a bp location if condition is invalid at that location
Currently, for a conditional breakpoint, GDB checks if the condition
can be evaluated in the context of the first symtab and line (SAL).
In case of an error, defining the conditional breakpoint is aborted.
This prevents having a conditional breakpoint whose condition may
actually be meaningful for some of the location contexts. This patch
makes it possible to define conditional BPs by checking all location
contexts. If the condition is meaningful for even one context, the
breakpoint is defined. The locations for which the condition gives
errors are disabled.
The bp_location struct is introduced a new field, 'disabled_by_cond'.
This field denotes whether the location is disabled automatically
because the condition was non-evaluatable. Disabled-by-cond locations
cannot be enabled by the user. But locations that are not
disabled-by-cond can be enabled/disabled by the user manually as
before.
For a concrete example, consider 3 contexts of a function 'func'.
class Base
{
public:
int b = 20;
void func () {}
};
class A : public Base
{
public:
int a = 10;
void func () {}
};
class C : public Base
{
public:
int c = 30;
void func () {}
};
Note that
* the variable 'a' is defined only in the context of A::func.
* the variable 'c' is defined only in the context of C::func.
* the variable 'b' is defined in all the three contexts.
With the existing GDB, it's not possible to define a conditional
breakpoint at 'func' if the condition refers to 'a' or 'c':
(gdb) break func if a == 10
No symbol "a" in current context.
(gdb) break func if c == 30
No symbol "c" in current context.
(gdb) info breakpoints
No breakpoints or watchpoints.
With this patch, it becomes possible:
(gdb) break func if a == 10
warning: failed to validate condition at location 1, disabling:
No symbol "a" in current context.
warning: failed to validate condition at location 3, disabling:
No symbol "a" in current context.
Breakpoint 1 at 0x11b6: func. (3 locations)
(gdb) break func if c == 30
Note: breakpoint 1 also set at pc 0x11ce.
Note: breakpoint 1 also set at pc 0x11c2.
Note: breakpoint 1 also set at pc 0x11b6.
warning: failed to validate condition at location 1, disabling:
No symbol "c" in current context.
warning: failed to validate condition at location 2, disabling:
No symbol "c" in current context.
Breakpoint 2 at 0x11b6: func. (3 locations)
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
stop only if a == 10
1.1 N* 0x00000000000011b6 in Base::func() at condbreak-multi-context.cc:23
1.2 y 0x00000000000011c2 in A::func() at condbreak-multi-context.cc:31
1.3 N* 0x00000000000011ce in C::func() at condbreak-multi-context.cc:39
2 breakpoint keep y <MULTIPLE>
stop only if c == 30
2.1 N* 0x00000000000011b6 in Base::func() at condbreak-multi-context.cc:23
2.2 N* 0x00000000000011c2 in A::func() at condbreak-multi-context.cc:31
2.3 y 0x00000000000011ce in C::func() at condbreak-multi-context.cc:39
(*): Breakpoint condition is invalid at this location.
Here, uppercase 'N' denotes that the location is disabled because of
the invalid condition, as mentioned with a footnote in the legend of
the table. Locations that are disabled by the user are still denoted
with lowercase 'n'. Executing the code hits the breakpoints 1.2 and
2.3 as expected.
Defining a condition on an unconditional breakpoint gives the same
behavior above:
(gdb) break func
Breakpoint 1 at 0x11b6: func. (3 locations)
(gdb) cond 1 a == 10
warning: failed to validate condition at location 1.1, disabling:
No symbol "a" in current context.
warning: failed to validate condition at location 1.3, disabling:
No symbol "a" in current context.
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
stop only if a == 10
1.1 N* 0x00000000000011b6 in Base::func() at condbreak-multi-context.cc:23
1.2 y 0x00000000000011c2 in A::func() at condbreak-multi-context.cc:31
1.3 N* 0x00000000000011ce in C::func() at condbreak-multi-context.cc:39
(*): Breakpoint condition is invalid at this location.
Locations that are disabled because of a condition cannot be enabled
by the user:
...
(gdb) enable 1.1
Breakpoint 1's condition is invalid at location 1, cannot enable.
Resetting the condition enables the locations back:
...
(gdb) cond 1
Breakpoint 1's condition is now valid at location 1, enabling.
Breakpoint 1's condition is now valid at location 3, enabling.
Breakpoint 1 now unconditional.
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
1.1 y 0x00000000000011b6 in Base::func() at condbreak-multi-context.cc:23
1.2 y 0x00000000000011c2 in A::func() at condbreak-multi-context.cc:31
1.3 y 0x00000000000011ce in C::func() at condbreak-multi-context.cc:39
If a location is disabled by the user, a condition can still be defined
but the location will remain disabled even if the condition is meaningful
for the disabled location:
...
(gdb) disable 1.2
(gdb) cond 1 a == 10
warning: failed to validate condition at location 1.1, disabling:
No symbol "a" in current context.
warning: failed to validate condition at location 1.3, disabling:
No symbol "a" in current context.
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
stop only if a == 10
1.1 N* 0x00000000000011b6 in Base::func() at condbreak-multi-context.cc:23
1.2 n 0x00000000000011c2 in A::func() at condbreak-multi-context.cc:31
1.3 N* 0x00000000000011ce in C::func() at condbreak-multi-context.cc:39
(*): Breakpoint condition is invalid at this location.
The condition of a breakpoint can be changed. Locations'
enable/disable states are updated accordingly.
...
(gdb) cond 1 c == 30
warning: failed to validate condition at location 1.1, disabling:
No symbol "c" in current context.
Breakpoint 1's condition is now valid at location 3, enabling.
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
stop only if c == 30
1.1 N* 0x00000000000011b6 in Base::func() at condbreak-multi-context.cc:23
1.2 N* 0x00000000000011c2 in A::func() at condbreak-multi-context.cc:31
1.3 y 0x00000000000011ce in C::func() at condbreak-multi-context.cc:39
(*): Breakpoint condition is invalid at this location.
(gdb) cond 1 b == 20
Breakpoint 1's condition is now valid at location 1, enabling.
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
stop only if b == 20
1.1 y 0x00000000000011b6 in Base::func() at condbreak-multi-context.cc:23
1.2 n 0x00000000000011c2 in A::func() at condbreak-multi-context.cc:31
1.3 y 0x00000000000011ce in C::func() at condbreak-multi-context.cc:39
# Note that location 1.2 was disabled by the user previously.
If the condition expression is bad for all the locations, it will be
rejected.
(gdb) cond 1 garbage
No symbol "garbage" in current context.
For conditions that are invalid or valid for all the locations of a
breakpoint, the existing behavior is preserved.
Regression-tested on X86_64 Linux.
gdb/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* breakpoint.h (class bp_location) <disabled_by_cond>: New field.
* breakpoint.c (set_breakpoint_location_condition): New function.
(set_breakpoint_condition): Disable a breakpoint location if parsing
the condition string gives an error.
(should_be_inserted): Update to consider the 'disabled_by_cond' field.
(build_target_condition_list): Ditto.
(build_target_command_list): Ditto.
(build_bpstat_chain): Ditto.
(print_one_breakpoint_location): Ditto.
(print_one_breakpoint): Ditto.
(breakpoint_1): Ditto.
(bp_location::bp_location): Ditto.
(locations_are_equal): Ditto.
(update_breakpoint_locations): Ditto.
(enable_disable_bp_num_loc): Ditto.
(init_breakpoint_sal): Use set_breakpoint_location_condition.
(find_condition_and_thread_for_sals): New static function.
(create_breakpoint): Call find_condition_and_thread_for_sals.
(location_to_sals): Call find_condition_and_thread_for_sals instead
of find_condition_and_thread.
gdb/testsuite/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.base/condbreak-multi-context.cc: New file.
* gdb.base/condbreak-multi-context.exp: New file.
gdb/doc/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.texinfo (Set Breaks): Document disabling of breakpoint
locations for which the breakpoint condition is invalid.
GDB Administrator [Tue, 27 Oct 2020 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Mon, 26 Oct 2020 23:45:25 +0000 (16:45 -0700)]
ld: Pass -fno-lto in ld-elfweak/elfweak.exp
* testsuite/ld-elfweak/elfweak.exp: Pass $NOLTO_CFLAGS to CC.
Tom Tromey [Mon, 26 Oct 2020 23:10:25 +0000 (17:10 -0600)]
Fix some minor bugs in test suite command logging
I noticed that the test suite command logging would create a file like
"gdb.cmd.-1". I tracked this down to a substraction in
standard_output_file_with_gdb_instance.
Then, I saw that the .in file was not created for MI. This is fixed
by adding a call to default_mi_gdb_start.
Finally, commands might not end up in the .in file in some cases. For
me this happened because the test took a long time, so I got impatient
and killed it. Flushing the file after each write seemed like a good
thing to do here.
gdb/testsuite/ChangeLog
2020-10-26 Tom Tromey <tom@tromey.com>
* lib/mi-support.exp (default_mi_gdb_start): Call
gdb_stdin_log_init.
* lib/gdb.exp (standard_output_file_with_gdb_instance): Don't
subtract one from gdb_instances.
(gdb_stdin_log_write): Flush in_file.
Tom de Vries [Mon, 26 Oct 2020 19:28:47 +0000 (20:28 +0100)]
[gdb/symtab] Read CU base address for enqueued CU
Consider the test-case contained in this patch. It consists of
two CUs:
- cu1, containing a DW_TAG_variable DIE foo
- cu2, containing a DW_TAG_base_type DIE int
where the variable foo has type int, in other words, there's an inter-CU
reference.
When expanding the symtab for cu1, expansion of the symtab for cu2 is
enqueued, and later processed by process_full_comp_unit. However, processing
of .debug_ranges fails because the range is specified relative to a base
address which is considered not to be present because
!cu->base_address.has_value (), and we run into this case in
dwarf2_ranges_process:
...
if (!base.has_value ())
{
/* We have no valid base address for the ranges
data. */
complaint (_("Invalid .debug_ranges data (no base address)"));
return 0;
}
...
Fix this in process_full_comp_unit by setting cu->base_address.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-10-26 Tom de Vries <tdevries@suse.de>
* dwarf2/read.c (process_full_comp_unit): Call
dwarf2_find_base_address.
gdb/testsuite/ChangeLog:
2020-10-26 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/enqueued-cu-base-addr.exp: New file.
Tom Tromey [Mon, 26 Oct 2020 18:54:19 +0000 (12:54 -0600)]
Don't inherit range-type signed-ness from underlying type
A recent commit changed gdb to inherit the signed-ness of a range type
from its underlying type:
commit
cfabbd351a174406fd5aa063303f5c8bf9266bbc
Author: Tom Tromey <tom@tromey.com>
Date: Sat Oct 17 11:41:59 2020 -0600
Make range types inherit signed-ness from base type
This passed testing -- but unfortunately, additional testing at
AdaCore showed that this change was incorrect. GNAT, at least, can
emit an unsigned range type whose underlying type is signed.
This patch reverts the code change from the above. I chose not to
reintroduce the FIXME comments, because now we know that they are
incorrect. Instead, this patch also adds a comment to
create_range_type.
A new test case is included as well.
2020-10-26 Tom Tromey <tromey@adacore.com>
* gdbtypes.c (create_range_type): Revert previous patch. Add
comment.
gdb/testsuite/ChangeLog
2020-10-26 Tom Tromey <tromey@adacore.com>
* gdb.ada/unsigned_range/foo.adb: New file.
* gdb.ada/unsigned_range/pack.adb: New file.
* gdb.ada/unsigned_range/pack.ads: New file.
* gdb.ada/unsigned_range.exp: New file.
Pedro Alves [Tue, 8 Sep 2020 16:34:41 +0000 (17:34 +0100)]
gdb::handle_eintr, remove need to specify return type
This eliminates the need to specify the return type when using
handle_eintr. We let the compiler deduce it for us.
Also, use lowercase for function parameter names. Uppercase should
only be used on template parameters.
gdb/ChangeLog:
* nat/linux-waitpid.c: Include "gdbsupport/eintr.h".
(my_waitpid): Use gdb::handle_eintr.
gdbserver/ChangeLog:
* netbsd-low.cc (netbsd_waitpid, netbsd_process_target::kill)
(netbsd_qxfer_libraries_svr4): Use gdb::handle_eintr without
explicit type.
gdbsupport/ChangeLog:
* eintr.h (handle_eintr): Replace Ret template parameter with
ErrorValType. Use it as type of the failure value. Deduce the
function's return type using decltype. Use lowercase for function
parameter names.
Tom de Vries [Mon, 26 Oct 2020 15:05:15 +0000 (16:05 +0100)]
[gdb/testsuite] Prevent pagination in GDB_INTERNALFLAGS
When running test-case gdb.base/corefile.exp with target board readnow, we run
into:
...
Reading symbols from outputs/gdb.base/corefile/corefile...^M
Expanding full symbols from outputs/gdb.base/corefile/corefile...^M
[New LWP 2293]^M
Core was generated by `outputs/gdb.base/corefile/co'.^M
Program terminated with signal SIGABRT, Aborted.^M
--Type <RET> for more, q to quit, c to continue without paging--\
FAIL: gdb.base/corefile.exp: (timeout) starting with -core
...
In commit
bd447abb24 "Make gdb.base/corefile.exp work on terminals with few
rows", pagination (in the same test-case) is prevented using:
...
set stty_init "rows 25 cols 80"
...
but this doesn't work in our case because using -readnow adds an extra line
"Expanding full symbols".
The test passes when increasing rows to 26. However, increasing the rows by
some n only fixes the problem for n lines, and things will break again if
somehow we end up with n + 1 lines.
Instead, fix this by setting heigth and width in INTERNAL_GDBFLAGS. This
solution was not chosen in commit
bd447abb24 because it doesn't handle
pagination due to the introduction text. But it does handle the pagination
due to the extra "Expanding full symbols", and any other line printed during
and after file loading.
Tested on x86_64-linux, with and without readnow.
With -readnow, fixes timeout FAILs in gdb.base/corefile.exp and
gdb.base/reread-readsym.exp.
gdb/testsuite/ChangeLog:
2020-10-26 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (INTERNAL_GDBFLAGS): Set heigth and width.
H.J. Lu [Mon, 26 Oct 2020 13:16:08 +0000 (06:16 -0700)]
gas: Clear all auto-assigned file slots
Since a file slot is auto-assigned for the #APP marker appeared before
the first .file <NUMBER> directive has been seen, clear all auto-assigned
file slots when seeing the first .file <NUMBER> directive.
PR gas/26778
* * dwarf2dbg.c (num_of_auto_assigned): New.
(allocate_filenum): Increment num_of_auto_assigned.
(dwarf2_directive_filename): Clear the slots auto-assigned
before the first .file <NUMBER> directive was seen.
* testsuite/gas/i386/dwarf4-line-1.d: New file.
* testsuite/gas/i386/dwarf4-line-1.s: Likewise.
* testsuite/gas/i386/i386.exp: Run dwarf4-line-1.
Nick Clifton [Mon, 26 Oct 2020 12:39:50 +0000 (12:39 +0000)]
Invoke the linker's error handling script with the keyword "undefined-symbol" when using it to help with undefined symbol errors.
PR 26626
* ldmain.c (undefined_symbol): Use the keyword undefined-symbol
when invoking the error handling script for undefined symbols.
* ld.texi: Update documentation.
Tom de Vries [Mon, 26 Oct 2020 10:08:38 +0000 (11:08 +0100)]
[gdb/testsuite] Add missing ranges base in dw2-objfile-overlap-*.S
When doing a gdb testsuite run with this trigger patch:
...
@@ -14454,6 +14454,7 @@ dwarf2_ranges_process
if (!base.has_value ())
{
+ gdb_assert (false);
/* We have no valid base address for the ranges
data. */
complaint (_("Invalid .debug_ranges data (no base address)"));
...
we run into the assert with test-case gdb.dwarf2/dw2-objfile-overlap.exp.
Fix this by adding the missing .debug_ranges base in
gdb.dwarf2/dw2-objfile-overlap-*.S.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-26 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-objfile-overlap-inner.S: Specify default base address
for CU.
* gdb.dwarf2/dw2-objfile-overlap-outer.S: Same.
Lifang Xia [Mon, 26 Oct 2020 10:02:33 +0000 (18:02 +0800)]
Update gas/ChangeLog of last commit
gas/
* ChangeLog: Update ChangLog of
2e58f3923ef
Cooper Qu [Mon, 19 Oct 2020 07:45:36 +0000 (15:45 +0800)]
C-SKY: Fix the literal dump of big vector constant.
gas/
* config/tc-csky.c (dump_literals): Fix the literal dump of big
vector constant.
Cooper Qu [Mon, 12 Oct 2020 14:31:29 +0000 (22:31 +0800)]
CSKY: Change default linker script for elf toolchain.
ld/
* emulparams/cskyelf.sh (TEXT_START_ADDR): Change to 0x60000000.
(DATA_ADDR) : Define.
(OTHER_SYMBOLS) : Define.
(OTHER_BSS_SYMBOLS) : Set symbol __sbss__.
(OTHER_BSS_END_SYMBOLS) : Set symbol __ebss__.
* ld/emulparams/cskyelf_linux.sh : Don't include cskyelf.sh.
* testsuite/ld-csky/data.d : Fix '/s*' to match spaces.
* testsuite/ld-csky/hilo16.d : Likewise.
Change-Id: Ia29b32eab4157ae5be0fc0b6125fb5b7d9dac939
Cooper Qu [Mon, 12 Oct 2020 14:31:14 +0000 (22:31 +0800)]
CSKY: Change plsl.u16 to plsl.16.
gas/
* testsuite/gas/csky/enhance_dsp.s : Change plsl.u16 to plsl.16.
* testsuite/gas/csky/enhance_dsp.d : Change plsl.u16 to plsl.16.
opcodes/
* csky-opc.h (csky_v2_opcodes): Change plsl.u16 to plsl.16.
Change-Id: Ifb43573192e215527355f6541365b9f6a8ec80a4
Cooper Qu [Mon, 12 Oct 2020 14:30:18 +0000 (22:30 +0800)]
CSKY: Add version flag in eflag and fix bug in disassembling register.
gas/
* config/tc-csky.c (md_begin): Add version flag in eflag.
include/
* opcode/csky.h (CSKY_VERSION_V1): Define, currently used.
(CSKY_VERSION_V2): Define.
(CSKY_VERSION_V3): Define.
Change-Id: Iafe3a9ce6fe544880a225b9fae439275a828bb34
Cooper Qu [Mon, 12 Oct 2020 14:29:09 +0000 (22:29 +0800)]
CSKY: Fix and add some instructions for VDSPV1.
gas/
* config/tc-csky.c (get_operand_value): Add handler for
OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
* testsuite/gas/csky/csky_vdsp.d : Fix the disassembling
for vector register.
opcodes/
* csky-dis.c (csky_output_operand): Add handler for
OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
* csky-opc.h (OPRND_TYPE_VREG_WITH_INDEX): New enum.
(OPRND_TYPE_IMM5b_VSH): New enum.
(csky_v2_opcodes): Fix and add some instructions for VDSPV1.
Change-Id: Ia5675d7b716fe5c331e6121ad8f83061ef6454bb
Cui,Lili [Mon, 26 Oct 2020 01:35:26 +0000 (09:35 +0800)]
Change avxvnni disassembler output from {vex3} to {vex}
gas/
* testsuite/gas/i386/avx-vnni.d: Change psuedo prefix from
{vex3} to {vex}
* testsuite/gas/i386/x86-64-avx-vnni.d: Likewise.
opcodes/
* i386-dis.c: Change "XV" to print "{vex}" pseudo prefix.
Simon Marchi [Mon, 26 Oct 2020 01:08:49 +0000 (21:08 -0400)]
gdb: move ptrace.m4 to gdbsupport
ptrace.m4, providing the GDB_AC_PTRACE autoconf macro, is used by gdb,
gdbserver and gdbsupport. I think it would make sense to move it to
gdbsupport.
gdb/ChangeLog:
* acinclude.m4: Update ptrace.m4 path.
* ptrace.m4: Moved to gdbsupport.
gdbserver/ChangeLog:
* acinclude.m4: Update ptrace.m4 path.
gdbsupport/ChangeLog:
* Makefile.in: Re-generate.
* acinclude.m4: Update ptrace.m4 path.
* ptrace.m4: Move here.
Change-Id: I849c149fd5dd8c3b2b0af38654fb353e3727871b
GDB Administrator [Mon, 26 Oct 2020 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Sun, 25 Oct 2020 03:00:10 +0000 (23:00 -0400)]
gdb: use inferior parameter in add_vsyscall_page
Use the new inferior parameter instead of target_gdbarch. There are
still hidden references to the current context behind core_bfd and
exec_bfd, but this seemed better than nothing.
gdb/ChangeLog:
* symfile-mem.c (add_vsyscall_page): Use inferior parameter
instead of target_gdbarch.
Change-Id: Iaf5ace555ee8e46cbef5190aca1f6fe639f06677
Simon Marchi [Sun, 25 Oct 2020 02:59:51 +0000 (22:59 -0400)]
gdb: make jit.c use the inferior_created inferior parameter
Use the inferior parameter now available in jit_inferior_created_hook.
It is passed down to jit_inferior_init, which uses it as much as
possible instead of the current inferior or current program space.
gdb/ChangeLog:
* jit.c (jit_reader_load_command): Pass current inferior.
(jit_inferior_init): Change parameter type to inferior, use it.
(jit_inferior_created): Remove.
(jit_inferior_created_hook): Pass inferior parameter down.
(_initialize_jit): Use jit_inferior_created_hook instead of
jit_inferior_created.
* jit.h (jit_inferior_created_hook): Add inferior parameter.
* infrun.c (follow_exec): Pass inferior to
jit_inferior_created_hook.
Change-Id: If3a2114a933370dd313d5abd623136d273cdb8fa
Simon Marchi [Sun, 25 Oct 2020 02:59:29 +0000 (22:59 -0400)]
gdb: pass inferior to check_pid_namespace_match
Pass the inferior argument available in thread_db_inferior_created, and
use it to do most things requiring the inferior.
check_pid_namespace_match is not completely decoupled from the current
inferior yet, there are hidden references behind target_can_run, for
example. But I think this is still a good step forward.
gdb/ChangeLog:
* linux-thread-db.c (check_pid_namespace_match): Add inferior
parameter and use it.
(thread_db_inferior_created): Pass inferior argument.
Change-Id: Ib768b14fc61dcf115fe13f776691f2c2f36e0679
Simon Marchi [Sun, 25 Oct 2020 02:59:04 +0000 (22:59 -0400)]
gdb: add inferior parameter to inferior_created observable
I think it would make sense for the inferior_created observable to say
which inferior is being dealt with, rather than relying on it being the
current inferior.
This patch adds an inferior parameter to inferior_created, but does not
change the callbacks to use it.
gdb/ChangeLog:
* aix-thread.c (aix_thread_inferior_created): Add inferior
parameter.
* bsd-uthread.c (bsd_uthread_inferior_created): Likewise.
* dummy-frame.c (cleanup_dummy_frames): Likewise.
* jit.c (jit_inferior_created): Likewise.
* linux-thread-db.c (thread_db_inferior_created): Likewise.
* m68k-linux-tdep.c (m68k_linux_inferior_created): Likewise.
* observable.h (inferior_created): Likewise.
* ravenscar-thread.c (ravenscar_inferior_created): Likewise.
* symfile-mem.c (add_vsyscall_page): Likewise.
* infcmd.c (post_create_inferior): Pass inferior argument.
Change-Id: I2543d19ff055a9df6b269929faea10b27d2adc5e
Alan Modra [Sun, 25 Oct 2020 11:51:45 +0000 (22:21 +1030)]
asan: alpha-vms: buffer overflow
* vms-misc.c (_bfd_vms_save_counted_string): Count length byte
towards maxlen.
GDB Administrator [Sun, 25 Oct 2020 00:00:14 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Sat, 24 Oct 2020 16:44:18 +0000 (12:44 -0400)]
gdbserver: re-generate configure
I get this diff when I re-generate the configure script in gdbserver,
probably leftovers from
e911c6663bb8 ("Require kinfo_get_file and
kinfo_get_vmmap for FreeBSD hosts").
gdbserver/ChangeLog:
* config.in: Re-generate.
* configure: Re-generate.
Change-Id: Id19a72ea9f3e7c7b4fdb0f319c9c0bbad0e39aeb
Joel Brobecker [Sat, 24 Oct 2020 04:36:42 +0000 (08:36 +0400)]
Document the GDB 10.1 release in gdb/ChangeLog
gdb/ChangeLog:
GDB 10.1 released.
GDB Administrator [Sat, 24 Oct 2020 00:00:13 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Fri, 23 Oct 2020 18:24:58 +0000 (11:24 -0700)]
ld: Set plug_opt only if compiler is available
* testsuite/config/default.exp (plug_opt): Set only if compiler
is available.
Tom de Vries [Fri, 23 Oct 2020 16:49:48 +0000 (18:49 +0200)]
[gdb/testsuite] Don't use default form in Dwarf::_guess_form
The only possible form for a DW_AT_low_pc attribute is DW_FORM_addr.
When specifying in dwarf assembly a low_pc attribute without explicit form:
...
{low_pc {main_label - 4}}
...
the resulting attribute uses DW_FORM_string, which is misinterpreted by gdb
when reading it as:
...
cu->base_address = attr->as_address ();
...
Stop using DW_FORM_string as default form. Instead, use a default form based
on the attribute name, if possible and unambiguous. Otherwise, error out.
F.i.:
- for DW_AT_low_pc we use DW_FORM_addr.
- For DW_AT_high_pc, we don't specify a default form because it could be
either address or constant class.
- For DW_AT_name, we use DW_FORM_string. While we could encode with
DW_FORM_strp instead, DW_FORM_string is always ok.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-23 Tom de Vries <tdevries@suse.de>
* lib/dwarf.exp (Dwarf::_guess_form): Return "" by default instead of
DW_FORM_string.
(Dwarf::_default_form): New proc.
(Dwarf::_handle_DW_TAG): Use _default_form. Error out if no form was
guessed.
Tom de Vries [Fri, 23 Oct 2020 12:55:04 +0000 (14:55 +0200)]
[gdb/testsuite] Use $srcfile in DW_AT_name for CU
In dwarf assembly test-case ada-linkage-name.exp, we have:
...
standard_testfile .c -debug.S
...
cu {} {
DW_TAG_compile_unit {
{DW_AT_name ada-linkage-name.c}
...
Use $srcfile instead of ada-linkage-name.c.
In dwarf assembly test-case atomic-type.exp, we have:
...
standard_testfile .c -dw.S
...
cu {} {
DW_TAG_compile_unit {
{DW_AT_name atomic-type-dw.c}
...
The dwarf generated into atomic-type-dw.S is meant to represent the code in
atomic-type.c, not atomic-type-dw.c, so use $srcfile instead of
atomic-type-dw.c.
Fix these and similar.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-23 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/ada-linkage-name.exp: Use $srcfile for DW_AT_name of CU.
* gdb.dwarf2/atomic-type.exp: Same.
* gdb.dwarf2/bad-regnum.exp: Same.
* gdb.dwarf2/cpp-linkage-name.exp: Same.
* gdb.dwarf2/dw2-align.exp: Same.
* gdb.dwarf2/dw2-bad-elf.exp: Same.
* gdb.dwarf2/dw2-bad-mips-linkage-name.exp: Same.
* gdb.dwarf2/dw2-bad-unresolved.exp: Same.
* gdb.dwarf2/dw2-namespaceless-anonymous.exp: Same.
* gdb.dwarf2/dw2-opt-structptr.exp: Same.
* gdb.dwarf2/dw2-unusual-field-names.exp: Same.
* gdb.dwarf2/enum-type.exp: Same.
* gdb.dwarf2/frame-inlined-in-outer-frame.exp: Same.
* gdb.dwarf2/info-locals-optimized-out.exp: Same.
* gdb.dwarf2/main-subprogram.exp: Same.
* gdb.dwarf2/missing-type-name.exp: Same.
* gdb.dwarf2/nonvar-access.exp: Same.
* gdb.dwarf2/typedef-void-finish.exp: Same.
* gdb.dwarf2/var-access.exp: Same.
* gdb.dwarf2/void-type.exp: Same.
Joel Brobecker [Fri, 23 Oct 2020 10:15:15 +0000 (14:15 +0400)]
ada-typeprint.c::ada_print_type: Remove redundant call to ada_check_typedef
This commit removes a call to ada_check_typedef which has already
been done a few lines earlier in the same function, so the second one
is superfluous.
gdb/ChangeLog:
* ada-typeprint.c (ada_print_type): Remove superfluous second call
to ada_check_typedef.
Andrew Burgess [Wed, 16 Sep 2020 15:27:30 +0000 (16:27 +0100)]
gdb: move f_language class into a header file
Moves the f_language class from f-lang.c into f-lang.h. The benefit
of this is that functions declared in other f-*.c files can become
member functions without having to go through a level of indirection.
Some additional support functions have now become private member
functions of the f_language class, these are mostly functions that
then called some other function that was itself a member of the
language_defn class hierarchy.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* f-exp.y (f_parse): Rename to...
(f_language::parser): ...this.
* f-lang.c (f_get_encoding): Rename to...
(f_language::get_encoding): ...this.
(f_op_print_tab): Rename to...
(f_language::op_print_tab): ...this.
(exp_descriptor_f): Rename to...
(f_language::exp_descriptor_tab): ...this.
(class f_language): Moved to f-lang.h.
(f_language::language_arch_info): New function, moved out of class
declaration.
(f_language::search_name_hash): Likewise.
(f_language::lookup_symbol_nonlocal): Likewise.
(f_language::get_symbol_name_matcher_inner): Likewise.
* f-lang.h: Add 'valprint.h' include.
(class f_language): Moved here from f-lang.c.
* f-typeprint.c (f_type_print_args): Delete commented out
declaration.
(f_print_typedef): Rename to...
(f_language::print_typedef): ...this.
(f_print_type): Rename to...
(f_language::print_type): ...this.
(f_type_print_varspec_prefix): Delete declaration and rename to...
(f_language::f_type_print_varspec_prefix): ...this.
(f_type_print_varspec_suffix): Delete declaration and rename to...
(f_language::f_type_print_varspec_suffix): ...this.
(f_type_print_base): Delete declaration and rename to...
(f_language::f_type_print_base): ...this.
* f-valprint.c (f_value_print_inner): Rename to...
(f_language::value_print_inner): ...this.
* parse.c: Delete 'f-lang.h' include.
Andrew Burgess [Mon, 21 Sep 2020 11:10:04 +0000 (12:10 +0100)]
gdb: Improve documentation comment on language_defn::print_type
Improves the comment at the declaration of language_defn::print_type.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* language.h (language_defn::print_type): Add variable names in
declaration, and update header comment.
Andrew Burgess [Sat, 19 Sep 2020 19:38:11 +0000 (20:38 +0100)]
gdb: Rename language_defn::demangle
GDB already has a global symbol `demangle` (a boolean), having a
language method called `demangle` is not a good idea as we often want
to reference `demangle` the control variable inside `demangle` the
member function.
This commit renames `demangle` the member function to
`demangle_symbol`.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* ada-lang.c (ada_language::demangle): Rename to...
(ada_language::demangle_symbol): ...this.
* c-lang.c (cplus_language::demangle): Rename to...
(cplus_language::demangle_symbol): ...this.
* d-lang.c (d_language::demangle): Rename to...
(d_language::demangle_symbol): ...this.
* f-lang.c (f_language::demangle): Rename to...
(f_language::demangle_symbol): ...this.
* go-lang.c (go_language::demangle): Rename to...
(go_language::demangle_symbol): ...this.
* language.c (language_demangle): Update call to demangle_symbol.
(auto_or_unknown_language::demangle): Rename to...
(auto_or_unknown_language::demangle_symbol): ...this.
* language.h (language_defn::demangle): Rename to...
(language_defn::demangle_symbol): ...this.
* objc-lang.c (objc_language::demangle): Rename to...
(objc_language::demangle_symbol): ...this.
* rust-lang.c (rust_language::demangle): Rename to...
(rust_language::demangle_symbol): ...this.
Andrew Burgess [Fri, 14 Aug 2020 14:07:52 +0000 (15:07 +0100)]
gdb: remove LA_ITERATE_OVER_SYMBOLS macro
Replace the single use of the LA_ITERATE_OVER_SYMBOLS macro with the
macro's definition, and delete the macro.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* language.h (LA_ITERATE_OVER_SYMBOLS): Delete.
(iterate_over_file_blocks): Replace use of macro with the macros
definition.
Andrew Burgess [Fri, 14 Aug 2020 14:06:08 +0000 (15:06 +0100)]
gdb: remove LA_PRINT_ARRAY_INDEX macro
Replace the single use of the LA_PRINT_ARRAY_INDEX macro with the
macro's definition, and delete the macro.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* language.h (LA_PRINT_ARRAY_INDEX): Delete.
* valprint.c (maybe_print_array_index): Replace use of macro with
the macros definition.
Andrew Burgess [Fri, 14 Aug 2020 14:05:48 +0000 (15:05 +0100)]
gdb: remove LA_VALUE_PRINT macro
Remove the LA_VALUE_PRINT macro, and replace its uses with direct
calls to the value_print member function on an appropriate language.
In the global 'value_print' function, we call the value_print method
on the current_language, this is a direct inline replacement of the
old LA_VALUE_PRINT macro.
However, in ada-lang.c, and language.c the macro was being used
within the print_array_index member function of a language class. In
these cases we now call the value_print member function of the current
language class.
In theory, when we are inside (for example) the
ada_language::print_array_index function the current_language should
always be set to Ada, so this change should have no effect. However,
if we ever could get into ada_language::print_array_index with the
current language set to something else (which I think would have been
a bug) then we would now see a change in behaviour. I couldn't find
any cases where this happened though.
There should be no user visible changes after this commit, but it is
not impossible in some edge cases.
gdb/ChangeLog:
* ada-lang.c (ada_language::print_array_index): Call value_print
directly.
* language.c (language_defn::print_array_index): Likewise.
* language.h (LA_VALUE_PRINT): Delete.
* valprint.c (value_print): Call value_print on the
current_language directly.
Andrew Burgess [Fri, 14 Aug 2020 13:52:26 +0000 (14:52 +0100)]
gdb: remove LA_PRINT_TYPEDEF macro
Remove the LA_PRINT_TYPEDEF macro, replace the single use with the
macros definition.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* language.h (LA_PRINT_TYPEDEF): Delete.
* typeprint.c (typedef_print): Call print_typedef directly on the
current_language object.
Andrew Burgess [Fri, 14 Aug 2020 13:50:48 +0000 (14:50 +0100)]
gdb: move Modula2 language class into a header file
Move the m2_language class from m2-lang.c into m2-lang.h. The benefit
of this move is that we can remove trampoline functions. Currently
the language implementation is split of different m2-* files with
m2-lang.h including declaration for all the language implementation
functions.
Currently the m2_language class in m2-lang.c has member functions that
then call the global functions declared in m2-lang.h.
After this change the m2_language class is declared in m2-lang.h, and
the member functions are the implementations defined in all the m2-*
files.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* m2-exp.y (m2_parse): Rename to...
(m2_language::parser): ...this. Update function signature.
* m2-lang.c (m2_printchar): Renamed to m2_language::printchar.
(m2_op_print): Rename to...
(m2_language::op_print_tab): ...this, and make const.
(exp_descriptor_modula2): Rename to...
(m2_language::exp_descriptor_modula2): ...this.
(class m2_language): Move to m2-lang.h.
(m2_language::language_arch_info): New function, moved out of
class declaration.
(m2_language::printchar): New function, body from m2_printchar.
(m2_language::printstr): New function, moved out of class
declaration.
(m2_language::emitchar): Likewise.
* m2-lang.h (m2_parse): Delete declaration.
(m2_print_typedef): Delete declaration.
(m2_value_print_inner): Delete declaration.
(class m2_language): Class declaration moved from m2-lang.c,
larger functions are left in m2-lang.c.
* m2-typeprint.c (m2_print_typedef): Rename to...
(m2_language::print_typedef): ...this, and update function
signature.
* m2-valprint.c (m2_value_print_inner): Rename to...
(m2_language::value_print_inner): ...this, replace use of
LA_PRINT_STRING with a direct call to printstr member function,
and update recursive call.
Andrew Burgess [Thu, 6 Aug 2020 10:14:37 +0000 (11:14 +0100)]
gdb: Merge auto and unknown language implementations
The auto_language and unknown_language classes are basically the same
except for the language names and store_sym_names_in_linkage_form_p
which the unknown_language overrides to return true, while
auto_language returns the default false.
This commit creates a new parent class from which both of these
languages can inherit. The two base classes are now greatly reduced.
Some of the static helper functions which previously were called from
both of these languages are now only called from one place, and so
I've inlined them into the new class.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* language.c (default_is_string_type_p): Delete, implementation
moved into auto_or_unknown_language::is_string_type_p.
(unk_op_print_tab): Moved into
auto_or_unknown_language::opcode_print_table.
(unknown_language_arch_info): Delete, implementation moved into
auto_or_unknown_language::language_arch_info.
(class auto_or_unknown_language): New class, member functions
copied from unknown_language class, with some updates.
(class unknown_language): Most member functions moved into
auto_or_unknown_language class. Inherit from
auto_or_unknown_language class.
(class auto_language): Inherit from auto_or_unknown_language.
Delete most member functions.
GDB Administrator [Fri, 23 Oct 2020 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
Hannes Domani [Tue, 6 Oct 2020 15:20:20 +0000 (17:20 +0200)]
Remove gdb_assert for TYPE_CODE_METHOD in stabs reader
It's possible to come across TYPE_CODE_UNDEF at this point in
read_member_functions, which according to a comment in read_type
is used for forward references.
gdb/ChangeLog:
2020-10-22 Hannes Domani <ssbssa@yahoo.de>
* stabsread.c (read_member_functions): Remove gdb_assert.
Hannes Domani [Tue, 6 Oct 2020 15:08:42 +0000 (17:08 +0200)]
Don't create _Complex type name if there is no target type name
This causes gdb to crash in strlen.
Happens if init_complex_type is called for a type created by
dbx_init_float_type in stabsread.c.
gdb/ChangeLog:
2020-10-22 Hannes Domani <ssbssa@yahoo.de>
* gdbtypes.c (init_complex_type): Check target type name.
Simon Marchi [Thu, 22 Oct 2020 17:28:12 +0000 (13:28 -0400)]
gdb: remove unused macros from target-debug.h
I noticed some clearly stale entries in target-debug.h (which contained
references to VEC). I commented everything in target-debug.h and then
uncommented things until it built again, it pointed out a few unused
macros. Remove them.
gdb/ChangeLog:
* target-debug.h (target_debug_print_struct_target_ops_p):
Remove.
(target_debug_print_async_callback_ftype_p): Remove.
(target_debug_print_struct_trace_state_variable_p): Remove.
(target_debug_print_struct_traceframe_info_p): Remove.
(target_debug_print_VEC__btrace_block_s__pp): Remove.
(target_debug_print_enum_btrace_format): Remove.
(target_debug_print_enum_info_proc_what): Remove.
(target_debug_print_thread_info_pp): Remove.
Change-Id: I7943d21ac6e78751fd7c65a45b345018623ac2f2
Simon Marchi [Thu, 22 Oct 2020 16:58:11 +0000 (12:58 -0400)]
gdb: make target_ops::make_corefile_notes return a unique ptr
Since we converted gdbarch_make_corefile_notes to returning a
gdb::unique_xmalloc_ptr, I figured it would make sense to converted
target_ops::make_corefile_notes as well.
The only implementation of that is in procfs.c, and it should ideally be
re-written as a gdbarch method (see comment in write_gcore_file_1), but
in the mean time I guess it doesn't hurt to throw some unique pointer at
it.
I tested that it builds on Solaris 11 (gcc compile farm machine gcc211),
but I am not able to test it, because I can't get GDB to start a
process (I'll look at that separately).
gdb/ChangeLog:
* target.h (struct target_ops) <make_corefile_notes>:
Change return type to unique pointer.
* target.c (dummy_make_corefile_notes): Likewise.
* exec.c (struct exec_target) <make_corefile_notes>:
Likewise.
(exec_target::make_corefile_notes): Likewise.
* procfs.c (class procfs_target) <make_corefile_notes>:
Likewise.
(procfs_do_thread_registers): Adjust to unique pointer.
(struct procfs_corefile_thread_data): Add constructor.
<note_data>: Change type to unique pointer.
(procfs_corefile_thread_callback): Adjust to unique pointer.
(procfs_target::make_corefile_notes): Change return type to
unique pointer.
* target-delegates.c: Re-generate.
* gcore.c (write_gcore_file_1): Adjust.
* target-debug.h (target_debug_print_gdb_unique_xmalloc_ptr_char):
New.
Change-Id: I768fb17ac0f7adc67d2fe95e952c784fe0ac37ab
Tom de Vries [Thu, 22 Oct 2020 15:23:25 +0000 (17:23 +0200)]
[gdb/symtab] Make find_block_in_blockvector more robust
While working on PR25858 I noticed that the following trigger patch:
...
@@ -2918,6 +2918,7 @@ find_pc_sect_compunit_symtab
const struct blockvector *bv;
bv = COMPUNIT_BLOCKVECTOR (cust);
+ (volatile int)blockvector_contains_pc (bv, pc);
b = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
if (BLOCK_START (b) <= pc
...
triggers this assert, which checks that the returned block indeed
contains pc:
...
@@ -170,7 +170,10 @@ find_block_in_blockvector
{
b = BLOCKVECTOR_BLOCK (bl, bot);
if (BLOCK_END (b) > pc)
- return b;
+ {
+ gdb_assert (BLOCK_START (b) <= pc);
+ return b;
+ }
bot--;
}
...
when running test-case gdb.ada/bp_c_mixed_case.exp.
It's possible that the trigger patch breaks an undocumented invariant: I've
tried a build and test run without the trigger patch and did not manage to
trigger the assert.
For robustness-sake, fix the assert by bailing out if 'BLOCK_START (b) <= pc'
doesn't hold.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-10-22 Tom de Vries <tdevries@suse.de>
* block.c (find_block_in_blockvector): Make sure the returned block
contains pc.
Simon Marchi [Thu, 22 Oct 2020 14:27:39 +0000 (10:27 -0400)]
gdb/dwarf: fix reading subprogram with DW_AT_specification (PR gdb/26693)
Fix a regression introduced by commit
7188ed02d2a7 ("Replace
dwarf2_per_cu_data::cu backlink with per-objfile map").
This patch targets both master and gdb-10-branch, since this is a
regression from GDB 9.
Analysis
--------
The DWARF generated by the included test case looks like:
0x0000000b: DW_TAG_compile_unit
DW_AT_language [DW_FORM_sdata] (4)
0x0000000d: DW_TAG_base_type
DW_AT_name [DW_FORM_string] ("int")
DW_AT_byte_size [DW_FORM_data1] (0x04)
DW_AT_encoding [DW_FORM_sdata] (5)
0x00000014: DW_TAG_subprogram
DW_AT_name [DW_FORM_string] ("apply")
0x0000001b: DW_TAG_subprogram
DW_AT_specification [DW_FORM_ref4] (0x00000014 "apply")
DW_AT_low_pc [DW_FORM_addr] (0x0000000000001234)
DW_AT_high_pc [DW_FORM_data8] (0x0000000000000020)
0x00000030: DW_TAG_template_type_parameter
DW_AT_name [DW_FORM_string] ("T")
DW_AT_type [DW_FORM_ref4] (0x0000000d "int")
0x00000037: NULL
0x00000038: NULL
Simply loading the file in GDB makes it crash:
$ ./gdb -nx --data-directory=data-directory testsuite/outputs/gdb.dwarf2/pr26693/pr26693
[1] 15188 abort (core dumped) ./gdb -nx --data-directory=data-directory
The crash happens here, where htab (a dwarf2_cu::die_hash field) is
unexpectedly NULL while generating partial symbols:
#0 0x000055555fa28188 in htab_find_with_hash (htab=0x0, element=0x7fffffffbfa0, hash=27) at /home/simark/src/binutils-gdb/libiberty/hashtab.c:591
#1 0x000055555cb4eb2e in follow_die_offset (sect_off=(unknown: 27), offset_in_dwz=0, ref_cu=0x7fffffffc110) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22951
#2 0x000055555cb4edfb in follow_die_ref (src_die=0x0, attr=0x7fffffffc130, ref_cu=0x7fffffffc110) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22968
#3 0x000055555caa48c5 in partial_die_full_name (pdi=0x621000157e70, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8441
#4 0x000055555caa4d79 in add_partial_symbol (pdi=0x621000157e70, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8469
#5 0x000055555caa7d8c in add_partial_subprogram (pdi=0x621000157e70, lowpc=0x7fffffffc5c0, highpc=0x7fffffffc5e0, set_addrmap=1, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8737
#6 0x000055555caa265c in scan_partial_symbols (first_die=0x621000157e00, lowpc=0x7fffffffc5c0, highpc=0x7fffffffc5e0, set_addrmap=1, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8230
#7 0x000055555ca98e3f in process_psymtab_comp_unit_reader (reader=0x7fffffffc6b0, info_ptr=0x60600009650d "\003int", comp_unit_die=0x621000157d10, pretend_language=language_minimal) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7614
#8 0x000055555ca9aa2c in process_psymtab_comp_unit (this_cu=0x621000155510, per_objfile=0x613000009f80, want_partial_unit=false, pretend_language=language_minimal) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7712
#9 0x000055555caa051a in dwarf2_build_psymtabs_hard (per_objfile=0x613000009f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8073
The special thing about this DWARF is that the subprogram at 0x1b is a
template specialization described with DW_AT_specification, and has no
DW_AT_name in itself. To compute the name of this subprogram,
partial_die_full_name needs to load the full DIE for this partial DIE.
The name is generated from the templated function name and the actual
tempalate parameter values of the specialization.
To load the full DIE, partial_die_full_name creates a dummy DWARF
attribute of form DW_FORM_ref_addr that points to our subprogram's DIE,
and calls follow_die_ref on it. This eventually causes
load_full_comp_unit to be called for the exact same CU we are currently
making partial symbols for:
#0 load_full_comp_unit (this_cu=0x621000155510, per_objfile=0x613000009f80, skip_partial=false, pretend_language=language_minimal) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:9238
#1 0x000055555cb4e943 in follow_die_offset (sect_off=(unknown: 27), offset_in_dwz=0, ref_cu=0x7fffffffc110) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22942
#2 0x000055555cb4edfb in follow_die_ref (src_die=0x0, attr=0x7fffffffc130, ref_cu=0x7fffffffc110) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22968
#3 0x000055555caa48c5 in partial_die_full_name (pdi=0x621000157e70, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8441
#4 0x000055555caa4d79 in add_partial_symbol (pdi=0x621000157e70, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8469
#5 0x000055555caa7d8c in add_partial_subprogram (pdi=0x621000157e70, lowpc=0x7fffffffc5c0, highpc=0x7fffffffc5e0, set_addrmap=1, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8737
#6 0x000055555caa265c in scan_partial_symbols (first_die=0x621000157e00, lowpc=0x7fffffffc5c0, highpc=0x7fffffffc5e0, set_addrmap=1, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8230
#7 0x000055555ca98e3f in process_psymtab_comp_unit_reader (reader=0x7fffffffc6b0, info_ptr=0x60600009650d "\003int", comp_unit_die=0x621000157d10, pretend_language=language_minimal) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7614
#8 0x000055555ca9aa2c in process_psymtab_comp_unit (this_cu=0x621000155510, per_objfile=0x613000009f80, want_partial_unit=false, pretend_language=language_minimal) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7712
#9 0x000055555caa051a in dwarf2_build_psymtabs_hard (per_objfile=0x613000009f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8073
load_full_comp_unit creates a cutu_reader for the CU. Since a dwarf2_cu
object already exists for the CU, load_full_comp_unit is expected to
find it and pass it to cutu_reader, so that cutu_reader doesn't create
a new dwarf2_cu for the CU.
And this is the difference between before and after the regression.
Before commit
7188ed02d2a7, the dwarf2_per_cu_data -> dwarf2_cu link was
a simple pointer in dwarf2_per_cu_data. This pointer was set up when
starting the read the partial symbols. So it was already available at
that point where load_full_comp_unit gets called. Post-
7188ed02d2a7,
this link is per-objfile, kept in the dwarf2_per_objfile::m_dwarf2_cus
hash map. The entry is only put in the hash map once the partial
symbols have been successfully read, when cutu_reader::keep is called.
Therefore, it is _not_ set at the point load_full_comp_unit is called.
As a consequence, a new dwarf2_cu object gets created and initialized by
load_full_comp_unit (including initializing that dwarf2_cu::die_hash
field). Meanwhile, the dwarf2_cu object created and used by the callers
up the stack does not get initialized for full symbol reading, and the
dwarf2_cu::die_hash field stays unexpectedly NULL.
Solution
--------
Since the caller of load_full_comp_unit knows about the existing
dwarf2_cu object for the CU we are reading (the one load_full_comp_unit
is expected to find), we can simply make it pass it down, instead of
having load_full_comp_unit look up the per-objfile map.
load_full_comp_unit therefore gets a new `existing_cu` parameter. All
other callers get updated to pass `per_objfile->get_cu (per_cu)`, so the
behavior shouldn't change for them, compared to the current HEAD.
A test is added, which is the bare minimum to reproduce the issue.
Notes
-----
The original problem was reproduced by downloading
https://github.com/oneapi-src/oneTBB/releases/download/v2020.3/tbb-2020.3-lin.tgz
and loading libtbb.so in GDB. This code was compiled with the Intel
C/C++ compiler. I was not able to reproduce the issue using GCC, I
think because GCC puts a DW_AT_name in the specialized subprogram, so
there's no need for partial_die_full_name to load the full DIE of the
subprogram, and the faulty code doesn't execute.
gdb/ChangeLog:
PR gdb/26693
* dwarf2/read.c (load_full_comp_unit): Add existing_cu
parameter.
(load_cu): Pass existing CU.
(process_imported_unit_die): Likewise.
(follow_die_offset): Likewise.
gdb/testsuite/ChangeLog:
PR gdb/26693
* gdb.dwarf2/template-specification-full-name.exp: New test.
Change-Id: I57c8042f96c45f15797a3848e4d384181c56bb44
Luis Machado [Wed, 14 Oct 2020 22:44:03 +0000 (19:44 -0300)]
Fix gdb.base/msym*.exp failures
AArch64 generates functions without a prologue for these two testcases,
therefore we shouldn't expect the function location to be displayed with
an offset.
gdb/testsuite/ChangeLog:
2020-10-22 Luis Machado <luis.machado@linaro.org>
* gdb.base/msym-bp-shl.exp (test_break): Adjust pattern to not
expected an offset from the function.
* gdb.base/msym-bp.exp (test): Likewise.
Przemyslaw Wirkus [Thu, 22 Oct 2020 14:17:35 +0000 (15:17 +0100)]
[PATCH][GAS][AArch64] Define BRBE system registers
This patch introduces BRBE (Branch Record Buffer Extension) system
registers.
Note: as this is register only extension we do not want to hide these
registers behind -march flag going forward (they should be enabled by
default).
gas/ChangeLog:
2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* testsuite/gas/aarch64/brbe-invalid.d: New test.
* testsuite/gas/aarch64/brbe-invalid.l: New test.
* testsuite/gas/aarch64/brbe-invalid.s: New test.
* testsuite/gas/aarch64/brbe.d: New test.
* testsuite/gas/aarch64/brbe.s: New test.
opcodes/ChangeLog:
2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c: Add BRBE system registers.
Przemyslaw Wirkus [Thu, 22 Oct 2020 14:17:10 +0000 (15:17 +0100)]
aarch64: Define CSRE system registers
This patch introduces CSRE (Call Stack Recorder Extension) system
registers.
Note: as this is register only extension we do not want to hide these
registers behind -march flag going forward (they should be enabled by
default).
CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size
of a Call stack record) instruction. This instruction will be added in
a following, separate patch. This change only adds CSRE system
registers.
gas/ChangeLog:
2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* testsuite/gas/aarch64/csre-invalid.d: New test.
* testsuite/gas/aarch64/csre-invalid.l: New test.
* testsuite/gas/aarch64/csre-invalid.s: New test.
* testsuite/gas/aarch64/csre.d: New test.
* testsuite/gas/aarch64/csre.s: New test.
opcodes/ChangeLog:
2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c: New CSRE system registers defined.
H.J. Lu [Thu, 22 Oct 2020 13:11:34 +0000 (06:11 -0700)]
gold: Skip bootstrap-test/bootstrap-test-r for LTO build
Skip bootstrap-test and bootstrap-test-r for LTO build due to different
build IDs.
* Makefile.am (bootstrap-test): Skip for LTO build.
(bootstrap-test-r): Likewise.
H.J. Lu [Thu, 22 Oct 2020 13:10:08 +0000 (06:10 -0700)]
ld: Skip bootstrap tests for -fprofile-generate=
Make plug_opt available to all linker tests. Skip bootstrap tests when
linker is compiled with -fprofile-generate=.
* testsuite/ld-plugin/lto.exp (plug_opt): Moved to ...
* testsuite/config/default.exp (plug_opt): Here. New.
* testsuite/ld-bootstrap/bootstrap.exp: Skip when linker is
compiled with -fprofile-generate=.
Luis Machado [Wed, 14 Oct 2020 22:11:09 +0000 (19:11 -0300)]
Fix gdb.base/corefile2.exp regression when running Docker/AUFS
The following failures started showing up after commit
bb2a67773c - "Use a std::vector in target_section_table":
FAIL: gdb.base/corefile2.exp: renamed binfile: print/x mbuf_ro[0]@4
FAIL: gdb.base/corefile2.exp: renamed binfile: print/x mbuf_ro[pagesize-4]@4
FAIL: gdb.base/corefile2.exp: renamed binfile: print/x mbuf_ro[-3]@6
FAIL: gdb.base/corefile2.exp: renamed binfile: print/x mbuf_rw[pagesize-3]@6
FAIL: gdb.base/corefile2.exp: renamed binfile: print/x mbuf_ro[pagesize-3]@6
I tracked it down to a problem in core_target::xfer_partial, at this point:
if (!m_core_file_mappings.empty ())
xfer_status = xfer_memory_via_mappings (readbuf, writebuf, offset,
len, xfered_len);
else
xfer_status = this->beneath ()->xfer_partial (object, annex, readbuf,
writebuf, offset, len,
xfered_len);
It seems commit
bb2a67773c uncovered a latent bug when handling a particular
case where things are running within a Docker container using the AUFS storage
driver.
When building the file mappings for a core file, we call
gdbarch_read_core_file_mappings, which in turn passes a couple lambda
callbacks. One pre-loop and one in-loop.
The catch is that commit
bb2a67773c reworked the pre-loop lambda and
made it do nothing. Before that commit, we always allocated
m_core_file_mappings in that lambda.
Now, when calling the in-loop lambda, we don't touch m_core_file_mappings
because the bfd is nullptr (given Docker leaks the host system path, and that
file doesn't exist within the container itself).
So, instead, we add an entry to the m_core_unavailable_mappings vector.
When we reach core_target::xfer_partial, we're only checking for an empty
m_core_file_mappings. Given it is now empty, we take the path of reading
the contents from the file, not the core file. This reads back unexpected
results.
The following patch fixes this by also checking for
m_core_unavailable_mappings, given core_target::xfer_memory_via_mappings
already handles the Docker/AUFS situation.
gdb/ChangeLog:
2020-10-22 Luis Machado <luis.machado@linaro.org>
* corelow.c (core_target::xfer_partial): Also check for an empty
m_core_unavailable_mappings vector.
H.J. Lu [Thu, 22 Oct 2020 13:04:21 +0000 (06:04 -0700)]
ld: Pass -fno-lto to non LTO tests
* testsuite/config/default.exp (NOLTO_CFLAGS): New.
* ld/testsuite/ld-elfcomm/elfcomm.exp: Add $NOLTO_CFLAGS to CC.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-undefined/undefined.exp: Likewise.
* testsuite/ld-srec/srec.exp: Add $NOLTO_CFLAGS to CC. Override
CXXFLAGS.
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Prepend -fno-lto
to cflags.
Andrew Burgess [Thu, 22 Oct 2020 12:37:56 +0000 (13:37 +0100)]
sim: move ChangeLog entries into the correct files
Moves some ChangeLog entries under sim/ into the correct files.
Srinath Parvathaneni [Thu, 22 Oct 2020 12:24:34 +0000 (13:24 +0100)]
arm: Fix the wrong error message string for mve vldr/vstr (PR26763).
For mve vldr/vstr instructions assembler is throwing wrong error message.
Instead of 'Error: syntax error' assembler fails with 'Error: lo register required'.
This patch fixes the issue.
eg:
$ cat x.s
.syntax unified
.thumb
vldrb.s16 q0, r0
Before this patch:
$ arm-none-eabi-as x.s -march=armv8.1-m.main+mve -mfloat-abi=hard
x.s: Assembler messages:
x.s:4: Error: lo register required -- `vldrb.s16 q0,r0'
After this patch:
$ arm-none-eabi-as x.s -march=armv8.1-m.main+mve -mfloat-abi=hard
x.s: Assembler messages:
x.s:4: Error: syntax error -- `vldrb.s16 q0,r0'
gas/ChangeLog:
2020-10-21 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
PR target/26763
* config/tc-arm.c (parse_address_main): Add new MVE addressing mode
check.
* testsuite/gas/arm/mve-vldr-vstr-bad.d: New test.
* testsuite/gas/arm/mve-vldr-vstr-bad.l: Likewise.
* testsuite/gas/arm/mve-vldr-vstr-bad.s: Likewise.
This page took 0.057025 seconds and 4 git commands to generate.