Mike Frysinger [Thu, 4 Jun 2009 19:11:31 +0000 (19:11 +0000)]
Blackfin: punt duplicated search_exception_table() prototype
The common code already has a prototype for this function and we don't use
it anywhere in the Blackfin code, so punt it from the Blackfin headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Robin Getz [Thu, 4 Jun 2009 00:32:59 +0000 (00:32 +0000)]
Blackfin: add missing access_ok() checks to user functions
The core string/clear user functions weren't checking the user pointers
which caused kernel crashes with some bad programs and tests (like LTP).
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 3 Jun 2009 00:33:31 +0000 (00:33 +0000)]
Blackfin: convert early_printk EVT init to a loop
The EVT registers are all contiguous in the memory map, so using a loop to
initialize them all rather than hardcoding the list results in much better
generated code (a hardware loop rather than a whole bunch of individual
loads).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 2 Jun 2009 08:46:35 +0000 (08:46 +0000)]
Blackfin: document the lsl variants of the L1 allocator
Make sure the meaning of "lsl" is covered somewhere and it is clear why we
somewhat duplicate the sram alloc/free functions.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 2 Jun 2009 00:35:33 +0000 (00:35 +0000)]
Blackfin: rename Blackfin relocs according to the toolchain
The latest Blackfin toolchain has fixed its relocation scheme to match
other ports: always use R_BFIN_ prefix and capitalize everything. This
brings the kernel in line with those fixes.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 1 Jun 2009 23:43:02 +0000 (19:43 -0400)]
Blackfin: check SIC defines rather than variant names
Rather than having to maintain a hard coded list of Blackfin variants, use
the SIC defines themselves. This fixes build problems on BF51x/BF538 under
some configurations as they were missing from one of the lists.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sonic Zhang [Mon, 1 Jun 2009 04:49:32 +0000 (00:49 -0400)]
Blackfin: add SSYNC to set_dma_sg() for descriptor fetching
Make sure the internal core buffers are flushed before telling the DMA
engine to fetch the descriptor structure so that it gets the right values.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Wed, 27 May 2009 09:58:35 +0000 (09:58 +0000)]
Blackfin: convert SMP to only use generic time framework
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Michael Hennerich [Fri, 29 May 2009 15:41:18 +0000 (15:41 +0000)]
Blackfin: bf548-ezkit/bf537-stamp: add resources for ADXL345/346
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 26 May 2009 23:34:51 +0000 (23:34 +0000)]
Blackfin: override default uClinux MTD addr/size
Due to a processor anomaly (
05000263 to be exact), most Blackfin parts
cannot keep the embedded filesystem image directly after the kernel in
RAM. Instead, the filesystem needs to be relocated to the end of memory.
As such, we need to tweak the map addr/size during boot for Blackfin
systems.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 26 May 2009 21:48:38 +0000 (21:48 +0000)]
Blackfin: fix command line corruption with DEBUG_DOUBLEFAULT
Commit
6b3087c6 (which introduced Blackfin SMP) broke command line passing
when the DEBUG_DOUBLEFAULT config option was enabled. Switch the code to
using a scratch register and not R7 which holds the command line.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Mon, 25 May 2009 06:40:42 +0000 (06:40 +0000)]
Blackfin: fix handling of initial L1 reservation
This restores some L1 reservation logic that was lost during the Blackfin
SMP merge.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Mon, 25 May 2009 04:44:00 +0000 (04:44 +0000)]
Blackfin: merge sram init functions
Now that the sram_init() function exists only to call the bfin_sram_init()
after the punting of the reserve_pda() function, simply merge the two to
avoid pointless overhead.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Mon, 25 May 2009 04:27:22 +0000 (04:27 +0000)]
Blackfin: drop unused reserve_pda() function
The Per-processor Data Area isn't actually reserved by this function, and
all it ended up doing was issuing a printk(), so punt it.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Michael Hennerich [Mon, 4 May 2009 09:11:37 +0000 (09:11 +0000)]
Blackfin: update gptimers API
First we fix the prototypes for functions that return boolean values by
using "int" rather than "uint16_t". Then we introduce a get_gptimer_run()
function for checking the current run status of a timer, and then we add a
disable_gptimers_sync() function which parallels disable_gptimers() with
corresponding normal "_sync" behavior.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Robin Getz [Wed, 20 May 2009 21:19:21 +0000 (21:19 +0000)]
Blackfin: include system/processor info in dump messages
People often copy & paste crash messages without surrounding context, so
include common useful information like system/processor stats in the crash
summary. This should smooth over the report/test cycle a bit more.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Robin Getz [Mon, 11 May 2009 18:55:16 +0000 (18:55 +0000)]
Blackfin: add workaround for anomaly
05000461
Returning too fast with a bad RETI can trigger false errors.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Robin Getz [Mon, 11 May 2009 18:34:41 +0000 (18:34 +0000)]
Blackfin: make sure stack is accessible before dumping it
When displaying a crash dump, make sure accessing the stack is safe so
we don't crash at the same time.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Robin Getz [Mon, 18 May 2009 18:33:26 +0000 (18:33 +0000)]
Blackfin: make deferred hardware errors more exact
Hardware errors on the Blackfin architecture are queued by nature of the
hardware design. Things that could generate a hardware level queue up at
the system interface and might not process until much later, at which
point the system would send a notification back to the core.
As such, it is possible for user space code to do something that would
trigger a hardware error, but have it delay long enough for the process
context to switch. So when the hardware error does signal, we mistakenly
evaluate it as a different process or as kernel context and panic (erp!).
This makes it pretty difficult to find the offending context. But wait,
there is good news somewhere.
By forcing a SSYNC in the interrupt entry, we force all pending queues at
the system level to be processed and all hardware errors to be signaled.
Then we check the current interrupt state to see if the hardware error is
now signaled. If so, we re-queue the current interrupt and return thus
allowing the higher priority hardware error interrupt to process properly.
Since we haven't done any other context processing yet, the right context
will be selected and killed. There is still the possibility that the
exact offending instruction will be unknown, but at least we'll have a
much better idea of where to look.
The downside of course is that this causes system-wide syncs at every
interrupt point which results in significant performance degradation.
Since this situation should not occur in any properly configured system
(as hardware errors are triggered by things like bad pointers), make it a
debug configuration option and disable it by default.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 24 Apr 2009 03:17:07 +0000 (03:17 +0000)]
Blackfin: add note about anomaly
05000242 being worked around
Document anomaly
05000242 workaround in source code.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Thu, 7 May 2009 04:09:15 +0000 (04:09 +0000)]
Blackfin: work around anomaly
05000220
When possible, work around anomaly
05000220 (external memory is write
back cached, but L2 is not cached). If not possible, detect the
conditions at build time and reject any qualifying configurations.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 20 May 2009 14:05:36 +0000 (14:05 +0000)]
Blackfin: rename some Blackfin drivers
Try to keep the naming conventions consistent, so:
SPI_ADC_BF533 -> BFIN_SPI_ADC
TWI_LCD -> BFIN_TWI_LCD
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Robin Getz [Tue, 5 May 2009 17:14:39 +0000 (17:14 +0000)]
Blackfin: make sure MPU CPLB for first 1k is marked as valid
This way we properly catch and kill applications that jump to a NULL ptr.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Fri, 8 May 2009 07:42:12 +0000 (07:42 +0000)]
Blackfin: add workaround for anomaly
05000287
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Fri, 15 May 2009 11:01:59 +0000 (11:01 +0000)]
Blackfin: add support for gptimer0 as a tick source
For systems where the core cycles are not a usable tick source (like SMP
or cycles gets updated), enable gptimer0 as an alternative.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Wed, 6 May 2009 10:38:07 +0000 (10:38 +0000)]
Blackfin: annotate anomaly
05000120
Add some notes for anomaly
05000120 to make sure we work around it.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Wed, 20 May 2009 06:06:15 +0000 (06:06 +0000)]
Blackfin: BF518F-EZBRD: handle required portmuxing of async pins
The two high address lines on the BF51x are not dedicated which means we
need to handle them like any other peripheral pin if we want to access the
upper 2MB of parallel flash.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sonic Zhang [Thu, 7 May 2009 10:04:19 +0000 (10:04 +0000)]
Blackfin: detect anomaly
05000274
Detect and reject operating conditions for anomaly
05000274 since the
problem cannot be worked around in software.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 29 Apr 2009 06:26:46 +0000 (06:26 +0000)]
Blackfin: do not append newlines to panic() messages
The panic() function already handles newlines for us.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 24 Apr 2009 03:55:41 +0000 (03:55 +0000)]
Blackfin: workaround anomaly
05000227
Workaround anomaly
05000227 by only using the scratch pad for stack when
absolutely necessary. The core code which reprograms clocks really only
touches MMRs directly with constants.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 23 Apr 2009 17:04:10 +0000 (17:04 +0000)]
Blackfin: delete unused sys_getpagesize() function
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Fri, 8 May 2009 07:42:12 +0000 (07:42 +0000)]
Blackfin: work around anomaly
05000287
Make sure we work around anomaly
05000287 by configuring different port
preferences for the data cache.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 24 Apr 2009 01:42:54 +0000 (01:42 +0000)]
Blackfin: punt useless GPIO init call
This init code existed only to dump a printk(), and not even a useful one.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Robin Getz [Thu, 23 Apr 2009 20:56:42 +0000 (20:56 +0000)]
Blackfin: annotate anomaly
05000119 in core DMA code
Add a reminder note to avoid the DMA_DONE bit in our DMA core code.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Robin Getz [Thu, 23 Apr 2009 14:15:04 +0000 (14:15 +0000)]
Blackfin: document anomaly
05000234 workaround
Note the reason for using CHIPD over DSPID.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Robin Getz [Thu, 23 Apr 2009 20:49:43 +0000 (20:49 +0000)]
Blackfin: fix early L1 relocation crash
Our early L1 relocate code may implicitly call code which lives in L1
memory. This is due to the dma_memcpy() rewrite that made the DMA code
lockless and safe to be used by multiple processes. If we start the
early DMA memcpy to relocate things into L1 instruction but then our
DMA memcpy code calls a function that lives in L1, things fall apart.
As such, create a small dedicated DMA memcpy routine that we can assume
sanity at boot time.
Reported-by: Filip Van Rillaer <filip.vanrillaer@oneaccess-net.com>
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Wed, 6 May 2009 09:59:11 +0000 (09:59 +0000)]
Blackfin: add MDMA defines to make cross-variant coding easier
Add some defines to make the BF538/BF561 look like most other Blackfin
parts in that it has a MDMA0 channel available for low level init.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 19 May 2009 12:58:13 +0000 (12:58 +0000)]
Blackfin: fix detection of cached L2 SRAM
Make sure our bfin_addr_dcachable() function flags cached L2 SRAM properly
else memory easily goes unflushed when working with DMA.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 14 May 2009 14:55:50 +0000 (14:55 +0000)]
Blackfin: simplify BF561 coreb driver greatly
Since 90% of this driver can be handled in user space, move it to the
corebld user space application.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sonic Zhang [Thu, 21 May 2009 06:39:46 +0000 (06:39 +0000)]
Blackfin: update defconfigs
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Mike Frysinger [Fri, 10 Apr 2009 21:20:19 +0000 (21:20 +0000)]
Blackfin: simplify the do_flush macro
Simplify the do_flush macro now that we don't need to take into account
a second instruction being used together.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Mike Frysinger [Mon, 13 Apr 2009 21:58:34 +0000 (21:58 +0000)]
Blackfin: set bf51x/bf52x to 0.0 rev by default and bf54x to 0.2
Update the default revs based on what we actually support (bf54x-0.[01]
is too broken to use).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Michael Hennerich [Thu, 16 Apr 2009 12:38:34 +0000 (12:38 +0000)]
Blackfin: do not error if GPIO IRQ is requested already as GPIO
Some drivers expect to be able to request both as GPIO and GPIO IRQ, so
allow that use case.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 8 May 2009 07:40:25 +0000 (07:40 +0000)]
Blackfin: pull updated anomaly lists from toolchain
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Michael Hennerich [Tue, 21 Apr 2009 12:05:50 +0000 (12:05 +0000)]
Blackfin: fix up PATA resource handling in bf537-stamp
Make sure the addresses declared match reality, and make the PATA IRQ code
optional.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Philippe Gerum [Wed, 8 Apr 2009 07:41:55 +0000 (07:41 +0000)]
Blackfin: merge Philippe's recent ipipe patch
ipipe-2.6.28.9-blackfin-git95aafe6.patch
Singed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 1 Apr 2009 12:25:58 +0000 (12:25 +0000)]
Blackfin: fix warnings with I/O port macros
The I/O port functions take ints, so we need to cast them up before
passing to our read/write funcs to avoid ugly messes of warnings.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Mariusz Kozlowski [Sun, 12 Apr 2009 20:03:30 +0000 (20:03 +0000)]
Blackfin: fix parentheses balance and convert some tab/space mixing
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Graf Yang [Mon, 20 Apr 2009 09:20:58 +0000 (09:20 +0000)]
Blackfin: fix bug found by traps test case 21
The traps test case 21 "exception 0x3f: l1_instruction_access" would make
the kernel panic on BF533's because we end up calling show_stack()
infinitely.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Mike Frysinger [Fri, 10 Apr 2009 20:52:08 +0000 (20:52 +0000)]
Blackfin: fix data cache flushing when doing icache flushing
Make sure we flush all data caches and their write buffers before flushing
icache, otherwise random edge cases could crop up where stale data is read
into icache from external memory. As fallout, punt the combined icache +
dcache flush function since we cannot safely do them back to back -- the
SSYNC is needed between the dcache flush and the icache flush.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Graf Yang [Wed, 8 Apr 2009 08:30:22 +0000 (08:30 +0000)]
Blackfin: fix link failure due to CONFIG_EXCEPTION_L1_SCRATCH
Move exception stack mess from entry.S to init.c to fix link failure when
CONFIG_EXCEPTION_L1_SCRATCH is in use.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Robin Getz [Tue, 31 Mar 2009 13:40:52 +0000 (13:40 +0000)]
Blackfin: allow scheduler functions to be placed into L1
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Sonic Zhang [Mon, 30 Mar 2009 09:07:26 +0000 (09:07 +0000)]
Blackfin: Allow bf548 ATAPI to be routed to GPIO
By default, it is routed to async memory address. In GPIO case,
GPIO peripheral PINs should be requested in advance.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Yi Li [Tue, 31 Mar 2009 10:36:51 +0000 (10:36 +0000)]
Blackfin: bf527-ezkit: add support for mmc-spi
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Mike Frysinger [Tue, 31 Mar 2009 00:18:35 +0000 (00:18 +0000)]
Blackfin: add some help text to the EBIU_AMBCTL settings
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Michael Hennerich [Wed, 15 Apr 2009 08:48:08 +0000 (08:48 +0000)]
Blackfin: add comment for anomaly
05000171 to init code
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Randy Dunlap [Fri, 12 Jun 2009 03:00:41 +0000 (20:00 -0700)]
block: fix kernel-doc in recent block/ changes
Fix kernel-doc warnings in recently changed block/ source code.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 12 Jun 2009 03:05:37 +0000 (20:05 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (87 commits)
nilfs2: get rid of bd_mount_sem use from nilfs
nilfs2: correct exclusion control in nilfs_remount function
nilfs2: simplify remaining sget() use
nilfs2: get rid of sget use for checking if current mount is present
nilfs2: get rid of sget use for acquiring nilfs object
nilfs2: remove meaningless EBUSY case from nilfs_get_sb function
remove the call to ->write_super in __sync_filesystem
nilfs2: call nilfs2_write_super from nilfs2_sync_fs
jffs2: call jffs2_write_super from jffs2_sync_fs
ufs: add ->sync_fs
sysv: add ->sync_fs
hfsplus: add ->sync_fs
hfs: add ->sync_fs
fat: add ->sync_fs
ext2: add ->sync_fs
exofs: add ->sync_fs
bfs: add ->sync_fs
affs: add ->sync_fs
sanitize ->fsync() for affs
repair bfs_write_inode(), switch bfs to simple_fsync()
...
Linus Torvalds [Fri, 12 Jun 2009 03:05:08 +0000 (20:05 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: remove unecessary include of thread_info.h in entry.S
m68knommu: enumerate INIT_THREAD fields properly
headers_check fix: m68k, swab.h
arch/m68knommu: Convert #ifdef DEBUG printk(KERN_DEBUG to pr_debug(
m68knommu: remove obsolete reset code
m68knommu: move CPU reset code for the 5272 ColdFire into its platform code
m68knommu: move CPU reset code for the 528x ColdFire into its platform code
m68knommu: move CPU reset code for the 527x ColdFire into its platform code
m68knommu: move CPU reset code for the 523x ColdFire into its platform code
m68knommu: move CPU reset code for the 520x ColdFire into its platform code
m68knommu: add CPU reset code for the 532x ColdFire
m68knommu: add CPU reset code for the 5249 ColdFire
m68knommu: add CPU reset code for the 5206e ColdFire
m68knommu: add CPU reset code for the 5206 ColdFire
m68knommu: add CPU reset code for the 5407 ColdFire
m68knommu: add CPU reset code for the 5307 ColdFire
m68knommu: merge system reset for code ColdFire 523x family
m68knommu: fix system reset for ColdFire 527x family
Yinghai Lu [Thu, 11 Jun 2009 22:09:00 +0000 (15:09 -0700)]
kvm: remove the duplicated cpumask_clear
zalloc_cpumask_var already cleared it.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yinghai Lu [Thu, 11 Jun 2009 22:07:48 +0000 (15:07 -0700)]
x86: use zalloc_cpumask_var in arch_early_irq_init
So we make sure MAXSMP gets a cleared cpumask
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Rothwell [Fri, 12 Jun 2009 00:14:22 +0000 (10:14 +1000)]
perfcounters: remove powerpc definitions of perf_counter_do_pending
Commit
925d519ab82b6dd7aca9420d809ee83819c08db2 ("perf_counter:
unify and fix delayed counter wakeup") added global definitions.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ryusuke Konishi [Sun, 7 Jun 2009 16:39:33 +0000 (01:39 +0900)]
nilfs2: get rid of bd_mount_sem use from nilfs
This will remove every bd_mount_sem use in nilfs.
The intended exclusion control was replaced by the previous patch
("nilfs2: correct exclusion control in nilfs_remount function") for
nilfs_remount(), and this patch will replace remains with a new mutex
that this inserts in nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ryusuke Konishi [Sun, 7 Jun 2009 16:39:32 +0000 (01:39 +0900)]
nilfs2: correct exclusion control in nilfs_remount function
nilfs_remount() changes mount state of a superblock instance. Even
though nilfs accesses other superblock instances during mount or
remount, the mount state was not properly protected in
nilfs_remount().
Moreover, nilfs_remount() has a lock order reversal problem;
nilfs_get_sb() holds:
1. bdev->bd_mount_sem
2. sb->s_umount (sget acquires)
and nilfs_remount() holds:
1. sb->s_umount (locked by the caller in vfs)
2. bdev->bd_mount_sem
To avoid these problems, this patch divides a semaphore protecting
super block instances from nilfs->ns_sem, and applies it to the mount
state protection in nilfs_remount().
With this change, bd_mount_sem use is removed from nilfs_remount() and
the lock order reversal will be resolved. And the new rw-semaphore,
nilfs->ns_super_sem will properly protect the mount state except the
modification from nilfs_error function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ryusuke Konishi [Sun, 7 Jun 2009 16:39:31 +0000 (01:39 +0900)]
nilfs2: simplify remaining sget() use
This simplifies the test function passed on the remaining sget()
callsite in nilfs.
Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount)
in the test function passed to sget(), this patch first looks up the
nilfs_sb_info struct which the given mount type matches, and then
acquires the super block instance holding the nilfs_sb_info.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ryusuke Konishi [Sun, 7 Jun 2009 16:39:30 +0000 (01:39 +0900)]
nilfs2: get rid of sget use for checking if current mount is present
This stops using sget() for checking if an r/w-mount or an r/o-mount
exists on the device. This elimination uses a back pointer to the
current mount added to nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ryusuke Konishi [Sun, 7 Jun 2009 16:39:29 +0000 (01:39 +0900)]
nilfs2: get rid of sget use for acquiring nilfs object
This will change the way to obtain nilfs object in nilfs_get_sb()
function.
Previously, a preliminary sget() call was performed, and the nilfs
object was acquired from a super block instance found by the sget()
call.
This patch, instead, instroduces a new dedicated function
find_or_create_nilfs(); as the name implies, the function finds an
existent nilfs object from a global list or creates a new one if no
object is found on the device.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ryusuke Konishi [Sun, 7 Jun 2009 16:39:28 +0000 (01:39 +0900)]
nilfs2: remove meaningless EBUSY case from nilfs_get_sb function
The following EBUSY case in nilfs_get_sb() is meaningless. Indeed,
this error code is never returned to the caller.
if (!s->s_root) {
...
} else if (!(s->s_flags & MS_RDONLY)) {
err = -EBUSY;
}
This simply removes the else case.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:08:54 +0000 (10:08 +0200)]
remove the call to ->write_super in __sync_filesystem
Now that all filesystems provide ->sync_fs methods we can change
__sync_filesystem to only call ->sync_fs.
This gives us a clear separation between periodic writeouts which
are driven by ->write_super and data integrity syncs that go
through ->sync_fs. (modulo file_fsync which is also going away)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:08:36 +0000 (10:08 +0200)]
nilfs2: call nilfs2_write_super from nilfs2_sync_fs
The call to ->write_super from __sync_filesystem will go away, so make
sure nilfs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:08:21 +0000 (10:08 +0200)]
jffs2: call jffs2_write_super from jffs2_sync_fs
The call to ->write_super from __sync_filesystem will go away, so make
sure jffs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:08:05 +0000 (10:08 +0200)]
ufs: add ->sync_fs
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:07:45 +0000 (10:07 +0200)]
sysv: add ->sync_fs
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:05:12 +0000 (10:05 +0200)]
hfsplus: add ->sync_fs
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:04:54 +0000 (10:04 +0200)]
hfs: add ->sync_fs
Add a ->sync_fs method for data integrity syncs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:04:35 +0000 (10:04 +0200)]
fat: add ->sync_fs
Add a ->sync_fs method for data integrity syncs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:04:17 +0000 (10:04 +0200)]
ext2: add ->sync_fs
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:03:58 +0000 (10:03 +0200)]
exofs: add ->sync_fs
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:03:38 +0000 (10:03 +0200)]
bfs: add ->sync_fs
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 8 Jun 2009 08:03:15 +0000 (10:03 +0200)]
affs: add ->sync_fs
Add a ->sync_fs method for data integrity syncs. Factor out common code
between affs_put_super, affs_write_super and the new affs_sync_fs into
a helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 8 Jun 2009 05:22:00 +0000 (01:22 -0400)]
sanitize ->fsync() for affs
unfortunately, for affs (especially for affs directories) we have
no real way to keep track of metadata ownership. So we have to
do more or less what file_fsync() does, but we do *not* need to
call write_super() there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 8 Jun 2009 05:15:58 +0000 (01:15 -0400)]
repair bfs_write_inode(), switch bfs to simple_fsync()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 8 Jun 2009 04:46:40 +0000 (00:46 -0400)]
Fix adfs GET_FRAG_ID() on big-endian
Missing conversion to host-endian before doing shifts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 8 Jun 2009 04:44:42 +0000 (00:44 -0400)]
repair adfs ->write_inode(), switch to simple_fsync()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 7 Jun 2009 19:44:50 +0000 (15:44 -0400)]
switch omfs to simple_fsync()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 7 Jun 2009 19:40:27 +0000 (15:40 -0400)]
switch udf to simple_fsync()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 7 Jun 2009 19:35:18 +0000 (15:35 -0400)]
switch ufs to simple_fsync()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 7 Jun 2009 19:29:45 +0000 (15:29 -0400)]
repair sysv_write_inode(), switch sysv to simple_fsync()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 7 Jun 2009 19:21:06 +0000 (15:21 -0400)]
switch minix to simple_fsync()
* get minix_write_inode() to honour the second argument
* now we can use simple_fsync() for minixfs
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 7 Jun 2009 19:14:02 +0000 (15:14 -0400)]
switch ext2 to simple_fsync()
kill ext2_sync_file() (along with ext2/fsync.c), get rid of
ext2_update_inode() - it's an alias of ext2_write_inode().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 7 Jun 2009 17:44:36 +0000 (13:44 -0400)]
Sanitize ->fsync() for FAT
* mark directory data blocks as assoc. metadata
* add new inode to deal with FAT, mark FAT blocks as assoc. metadata of that
* now ->fsync() is trivial both for files and directories
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 7 Jun 2009 13:47:13 +0000 (09:47 -0400)]
fs/qnx4: sanitize includes
fs-internal parts of qnx4_fs.h taken to fs/qnx4/qnx4.h, includes adjusted,
qnx4_fs.h doesn't need unifdef anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 7 Jun 2009 13:30:08 +0000 (09:30 -0400)]
Sanitize qnx4 fsync handling
* have directory operations use mark_buffer_dirty_inode(),
so that sync_mapping_buffers() would get those.
* make qnx4_write_inode() honour its last argument.
* get rid of insane copies of very ancient "walk the indirect blocks"
in qnx4/fsync - they never matched the actual fs layout and, fortunately,
never'd been called. Again, all this junk is not needed; ->fsync()
should just do sync_mapping_buffers + sync_inode (and if we implement
block allocation for qnx4, we'll need to use mark_buffer_dirty_inode()
for extent blocks)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 7 Jun 2009 18:56:44 +0000 (14:56 -0400)]
New helper - simple_fsync()
writes associated buffers, then does sync_inode() to write
the inode itself (and to make it clean). Depends on
->write_inode() honouring the second argument.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Alessio Igor Bogani [Tue, 12 May 2009 13:10:54 +0000 (15:10 +0200)]
Push BKL down into ->remount_fs()
[xfs, btrfs, capifs, shmem don't need BKL, exempt]
Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nick Piggin [Thu, 28 May 2009 07:01:15 +0000 (09:01 +0200)]
fs: block_dump missing dentry locking
I think the block_dump output in __mark_inode_dirty is missing dentry locking.
Surely the i_dentry list can change any time, so we may not even *get* a
dentry there. If we do get one by chance, then it would appear to be able to
go away or get renamed at any time...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nick Piggin [Tue, 2 Jun 2009 10:07:47 +0000 (12:07 +0200)]
fs: remove incorrect I_NEW warnings
Some filesystems can call in to sync an inode that is still in the
I_NEW state (eg. ext family, when mounted with -osync). This is OK
because the filesystem has sole access to the new inode, so it can
modify i_state without races (because no other thread should be
modifying it, by definition of I_NEW). Ie. a false positive, so
remove the warnings.
The races are described here
7ef0d7377cb287e08f3ae94cebc919448e1f5dff,
which is also where the warnings were introduced.
Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Mike Frysinger [Tue, 26 May 2009 09:45:04 +0000 (05:45 -0400)]
linux/magic.h: move cramfs magic out of cramfs_fs.h
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Fri, 5 Jun 2009 10:26:23 +0000 (12:26 +0200)]
xfs: remove ->write_super and stop maintaining ->s_dirt
the write_super method is used for
(1) writing back the superblock periodically from pdflush
(2) called just before ->sync_fs for data integerity syncs
We don't need (1) because we have our own peridoc writeout through xfssyncd,
and we don't need (2) because xfs_fs_sync_fs performs a proper synchronous
superblock writeout after all other data and metadata has been written out.
Also remove ->s_dirt tracking as it's only used to decide when too call
->write_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jens Axboe [Mon, 25 May 2009 07:30:45 +0000 (09:30 +0200)]
ntfs: remove old debug check for dirty data in ntfs_put_super()
This should not trigger anymore, so kill it.
Acked-by: Anton Altaparmakov <aia21@cam.ac.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This page took 0.043654 seconds and 5 git commands to generate.