Jim Kingdon [Wed, 27 Oct 1993 18:26:40 +0000 (18:26 +0000)]
* gdb.texinfo (Command Files): Explain order of init file reading.
David D. Zuhn [Wed, 27 Oct 1993 17:46:16 +0000 (17:46 +0000)]
add support for aviion
Ian Lance Taylor [Wed, 27 Oct 1993 16:54:54 +0000 (16:54 +0000)]
Took case '>' out of macro_build again to avoid confusion. Use & 0x1f
on the shift count rather than % 32.
Ian Lance Taylor [Wed, 27 Oct 1993 16:21:30 +0000 (16:21 +0000)]
* nlmcode.h (nlm_swap_auxiliary_headers_in,
nlm_swap_auxiliary_headers_out): Handle sharedDebugRecordOffset
and sharedDebugRecordCount fields.
Ian Lance Taylor [Wed, 27 Oct 1993 16:21:14 +0000 (16:21 +0000)]
* nlmconv.c (main): Set sharedDebugRecordOffset and
sharedDebugRecordCount fields in extended header.
Jim Kingdon [Wed, 27 Oct 1993 16:20:51 +0000 (16:20 +0000)]
* gdb.texinfo (Command Files): Explain order of init file reading.
Ian Lance Taylor [Wed, 27 Oct 1993 16:06:56 +0000 (16:06 +0000)]
* nlmconv.c (main): Force moduleName field to upper case.
Ian Lance Taylor [Wed, 27 Oct 1993 15:52:03 +0000 (15:52 +0000)]
* config/tc-mips.c (macro_build): Handle '>' case (shift amount
between 32 and 63 for double shift instruction).
(mips_ip): Likewise.
(printInsn): Likewise.
Ian Lance Taylor [Wed, 27 Oct 1993 15:52:00 +0000 (15:52 +0000)]
* mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
larger than 32. Moved dsxx32 variants first for disassembler.
Ian Lance Taylor [Wed, 27 Oct 1993 15:46:57 +0000 (15:46 +0000)]
* common.h (NLM_SIGNATURE): Do not define (it's different for each
backend).
Also minor comment changes to internal.h and external.h.
Jim Kingdon [Wed, 27 Oct 1993 05:48:39 +0000 (05:48 +0000)]
* remote.texi (Bootstrapping): Talk about getting the serial driver
to deal with ^C sent by gdb to stop the remote system.
Jim Kingdon [Wed, 27 Oct 1993 05:31:10 +0000 (05:31 +0000)]
* remote.texi (Bootstrapping): Talk about getting the serial driver
to deal with ^C sent by gdb to stop the remote system.
Jim Kingdon [Wed, 27 Oct 1993 05:21:01 +0000 (05:21 +0000)]
* mips-tdep.c (mips_pop_frame): If proc_desc is NULL, don't dump core.
Ken Raeburn [Tue, 26 Oct 1993 23:21:17 +0000 (23:21 +0000)]
Get rid of "Sanitize for-fsf" stuff; it didn't get the right results.
Ken Raeburn [Tue, 26 Oct 1993 23:02:18 +0000 (23:02 +0000)]
* configure.in: Produce warning message for subdirectories not
configurable for this host/target combination. Don't try to
configure gdb for vms.
(Needed for FSF releases. Should be harmless for ours.)
Jim Kingdon [Tue, 26 Oct 1993 22:16:07 +0000 (22:16 +0000)]
gcc -Wall lint:
* nlmread.c: Include stabsread.h.
* Makefile.in: Update dependencies.
Ian Lance Taylor [Tue, 26 Oct 1993 22:10:37 +0000 (22:10 +0000)]
* config/tc-ns32k.c (tc_aout_fix_to_chars): Output the symbol
number in the right place. Untested. Probably does not work for
cross assembly. From cagney@cs.adelaide.edu.au (Andrew Cagney).
Ian Lance Taylor [Tue, 26 Oct 1993 21:58:41 +0000 (21:58 +0000)]
* config/tc-m68k.c (md_apply_fix_2): Error if a short branch uses
an illegal offset of 0 or -1.
Jim Kingdon [Tue, 26 Oct 1993 21:36:00 +0000 (21:36 +0000)]
* targets.c (target_vector): Remove SCO_CORE. On Sep 11 1993,
we started using trad-core.c for SCO instead.
* targets.c (target_vector): Re-enable generic ELF and NLM targets.
Ian Lance Taylor [Tue, 26 Oct 1993 21:01:15 +0000 (21:01 +0000)]
* config/obj-elf.c (obj_elf_init_stab_section): Align .stab
section to a longword boundary.
Ian Lance Taylor [Tue, 26 Oct 1993 20:58:54 +0000 (20:58 +0000)]
* elfcode.h (assign_file_position_for_section): Align sh_offset to
sh_addralign (this is what UnixWare does, and it shouldn't hurt).
Jim Kingdon [Tue, 26 Oct 1993 20:41:35 +0000 (20:41 +0000)]
* remote.c: Change PBUFSIZ back to 400. John's 28 Feb 1992 change
to increase it broke the ability to write large chunks of memory
with m68k-stub and i386-stub. Now we only use more than 400 on
machines where we need that much to write the registers.
* remote.c (remote_write_bytes): Eliminate possible abort(). The
check for when to abort was off by a few bytes and besides which,
it is handled by MAXBUFBYTES, which the caller uses.
* m68k-stub.c: Add comments about trap #1 and trap #8 instructions.
David Edelsohn [Tue, 26 Oct 1993 18:01:45 +0000 (18:01 +0000)]
* Makefile.in (CSEARCH): Add -I$(srcdir)/../../gdb
* interp.c: #include "remote-sim.h".
(sim_resume): int result, new arg `siggnal'.
(sim_write): Use SIM_ADDR for type of arg `addr'.
(sim_read): Use SIM_ADDR for type of arg `addr'.
Use unsigned char * for `buffer'.
(sim_store_register): int result.
(sim_fetch_register): Ditto.
(sim_stop_reason): Renamed from sim_stop_signal. New arg `reason'.
(sim_set_pc): int result, use SIM_ADDR for type of arg `x'.
(sim_info): int result, new args `verbose', `printf_fn'.
(sim_kill): int result.
(sim_open): int result, new arg `name'.
* run.c: #include <stdio.h>
(main): Update call to sim_info.
Ken Raeburn [Tue, 26 Oct 1993 17:32:49 +0000 (17:32 +0000)]
Makefile.in, tc-hppa.c changes
Ken Raeburn [Tue, 26 Oct 1993 17:30:47 +0000 (17:30 +0000)]
list a bunch of files known to get deleted
Ken Raeburn [Tue, 26 Oct 1993 17:29:39 +0000 (17:29 +0000)]
Show full pathnames.
For "safe" case, move tc-sparc64 files into .Recover, instead of deleting them.
Ken Raeburn [Tue, 26 Oct 1993 17:26:23 +0000 (17:26 +0000)]
(tc_gen_reloc): ELF32_HPPA_R_ADDEND -> HPPA_R_ADDEND.
Ken Raeburn [Tue, 26 Oct 1993 17:22:20 +0000 (17:22 +0000)]
From Jeff Law and Pete Hoogenboom at Utah:
* elf32-hppa.h (hppa_elf_stub_finish): Add prototype.
(ELF32_HPPA_R_ARG_RELOC): Renamed without the ELF32 prefix
and moved into libhppa.h. All references changed.
(ELF32_HPPA_R_CONSTANT, ELF32_HPPA_R_ADDEND): Likewise.
(get_opcode and opcode defines): Move into libhppa.h
* elf32-hppa.c (hppa_elf_insn2fmt): Rename and move info libhppa.h.
* libhppa.h (HPPA_R_*): Moved here. Reformatted slightly to make for easier
reading.
(get_opcode): Moved here. FIXME! this really should be a C function
inside the opcode library!
(bfd_hppa_insn2fmt): Likewise.
* targets.c (target_vector): Enable elf32-hppa vector.
* elf32-hppa.c (hppa_elf_get_section_contents): Add new comments and clarify
existing comments. Do not use DEFUN to declare this function. Fix numerous
indention problems. Correctly handle cases where symbol extension section may
need to be read from disk, read from memory, or built then read from memory.
* elf32-hppa.h: Reformat with gnu-indent and hand fix numerous
formatting and indention problems gnu-indent can not handle.
Clarify some comments about relocation types. Comment basic
relocation "classes". Group PARAM declarations together.
(HPPA_SXT_{NULL, SYMNDX, RG_RELOC}): Make members of a new
enumerated type rather than #defines.
David Edelsohn [Tue, 26 Oct 1993 17:01:03 +0000 (17:01 +0000)]
* Makefile.in (CSEARCH): Add -I$(srcdir)/../../gdb
* compile.c: #include "remote-sim.h".
(sim_resume): New arg siggnal.
(sim_write): Use SIM_ADDR for type of arg addr. Always return a value.
(sim_read): Ditto.
(sim_store_register): Result is type int.
(sim_fetch_register): Ditto.
(sim_stop_reason): Renamed from sim_stop_signal.
(sim_set_pc): Use SIM_ADDR for type of arg pc.
(sim_info): int result, new arg printf_fn.
(sim_kill): int result.
(sim_open): int result, new arg name.
* run.c (main): Use sim_set_pc to set pc. Update call to sim_info.
David Edelsohn [Tue, 26 Oct 1993 16:34:01 +0000 (16:34 +0000)]
* remote-sim.h (SIM_ADDR): New type (same as CORE_ADDR).
(sim_set_pc): Update prototype.
(sim_read, sim_write): Ditto, and use unsigned char *buf.
(sim_fetch_register, sim_store_register): Use unsigned char *buf.
(sim_info): Pass printf function as argument, add verbose argument.
(sim_stop_reason): Renamed from sim_stop_signal, fix prototype.
* remote-sim.c (gdbsim_wait): Update call to sim_stop_reason.
(gdbsim_files_info): Update call to sim_info.
Jim Kingdon [Tue, 26 Oct 1993 15:49:39 +0000 (15:49 +0000)]
* valops.c (value_assign): Call reinit_frame_cache when assigning
to a register.
Stu Grossman [Tue, 26 Oct 1993 09:42:15 +0000 (09:42 +0000)]
* som.c (hppa_object_setup): Set SEC_CODE for .text section so
that GDB can figure out text_start and text_end.
Stu Grossman [Tue, 26 Oct 1993 01:13:28 +0000 (01:13 +0000)]
* infrun.c (wait_for_inferior): Fix PC out of objfile bounds
check to just use stop_func_name == 0.
Stu Grossman [Mon, 25 Oct 1993 22:28:46 +0000 (22:28 +0000)]
* gdb.disasm/hppa.mt: Use $(srcdir) in hppa.o make rule.
Stu Grossman [Mon, 25 Oct 1993 22:24:02 +0000 (22:24 +0000)]
* infrun.c (wait_for_inferior): Fix PC out of subroutine bounds
check to use prev_func_start/end instead of stop_func_start/end.
* remote-udi.c (store_register): Invalidate NPC/PC_REGNUM after
changing PC.
Jim Kingdon [Mon, 25 Oct 1993 22:08:47 +0000 (22:08 +0000)]
* gdb.t06/signals.exp: Skip whole file with xfail for HPPA.
Ian Lance Taylor [Mon, 25 Oct 1993 21:22:33 +0000 (21:22 +0000)]
Fix up warnings from gcc -Wall:
* coffgen.c (coff_print_symbol): Use %lx and cast n_value to
unsigned long. Use %ld for tagndx. Use %lx for offset + vma and
cast it to unsigned long.
* ecoff.c (ecoff_emit_aggregate): Use %ld.
(ecoff_print_symbol): Use %ld, and cast indx and sym_base to long.
* coffcode.h (dummy_reloc16_estimate): Specify return type.
Jim Kingdon [Mon, 25 Oct 1993 21:15:53 +0000 (21:15 +0000)]
* gdbserver/{low-lynx.c,low-sparc.c,low-sun3.c}, standalone.c,
m3-nat.c, i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c: bcopy -> memcpy.
Thomas Lord [Mon, 25 Oct 1993 20:55:03 +0000 (20:55 +0000)]
Changed the DOC parameter type to gdb_define_app_command.
Fixed typo.
Ian Lance Taylor [Mon, 25 Oct 1993 20:52:07 +0000 (20:52 +0000)]
* objcopy.c (main): Give a usage message if there are too many
arguments.
Jim Kingdon [Mon, 25 Oct 1993 20:20:15 +0000 (20:20 +0000)]
gcc -Wall lint:
* breakpoint.c: Include thread.h.
* coffread.c: Include stabsread.h.
* Makefile.in: Update dependencies.
* breakpoint.c (mention): Add bp_call_dummy to switch.
* symmisc.c (dump_symtab): Use %d not %ld for line number.
Ian Lance Taylor [Mon, 25 Oct 1993 20:10:35 +0000 (20:10 +0000)]
* relax.c (write_relax): Check return value of bfd_seclet_link.
Ian Lance Taylor [Mon, 25 Oct 1993 20:09:46 +0000 (20:09 +0000)]
* libbfd.c (bfd_write): If not everything is written out, set
bfd_error to system_call_error. If the return value is
non-negative, set errno to ENOSPC (if ENOSPC is defined).
(bfd_seek): If the seek fails, set bfd_error to system_call_error.
(bfd_generic_set_section_contents): For a bad offset + count, set
bfd_error to bad_value.
* seclet.c (rel): Don't abort. Instead, return false.
Thomas Lord [Mon, 25 Oct 1993 19:40:46 +0000 (19:40 +0000)]
Substantial rewrite.
Steve Chamberlain [Mon, 25 Oct 1993 18:48:17 +0000 (18:48 +0000)]
* config/tc-sh.c (build_Mbytes): Write the relocs to the correct
address. (md_assemble): Make error handling a bit more graceful.
(md_apply_fix): Don't warn on non aligned displacement.
Jim Kingdon [Mon, 25 Oct 1993 18:44:32 +0000 (18:44 +0000)]
* gdb.t24/demangle.exp: Remove "3220" from the one remaining xfail.
It is not from PR 3220.
Steve Chamberlain [Mon, 25 Oct 1993 18:34:00 +0000 (18:34 +0000)]
Add full lda information
Ian Lance Taylor [Mon, 25 Oct 1993 18:27:24 +0000 (18:27 +0000)]
Fix up membar argument handling.
Ken Raeburn [Mon, 25 Oct 1993 18:26:24 +0000 (18:26 +0000)]
* Makefile.in (taz): Replace "byacc" with "bison -y" in the
appropriate files before making "diststuff".
(DISTBISONFILES): New var: list of files to be edited.
(DISTSTUFFDIRS): Add binutils.
Steve Chamberlain [Mon, 25 Oct 1993 18:19:16 +0000 (18:19 +0000)]
* config/tc-z8k.c (get_specific, built_bytes): Understand all the
aspects of lda.
Ian Lance Taylor [Mon, 25 Oct 1993 18:08:33 +0000 (18:08 +0000)]
* config/tc-sparc.c (sparc_ip): Use strtol to parse membar
argument, to permit hexadecimal numbers.
Ken Raeburn [Mon, 25 Oct 1993 17:51:05 +0000 (17:51 +0000)]
doc/Makefile.in, write.c, config/tc-sparc.* changes
Ken Raeburn [Mon, 25 Oct 1993 17:49:24 +0000 (17:49 +0000)]
* write.c (write_relocs): For relocs that are pc_relative and
pcrel_offset and not partial_inplace, adjust reloc->addend to
compensate for a bfd_perform_relocation bug.
Ken Raeburn [Mon, 25 Oct 1993 17:45:17 +0000 (17:45 +0000)]
* config/tc-sparc.h: Removed remaining non-BFD_ASSEMBLER code.
* config/tc-sparc.c: Ditto.
(tc_gen_reloc): Include fx_offset for pcrel fixups.
Ken Raeburn [Mon, 25 Oct 1993 17:38:20 +0000 (17:38 +0000)]
* Makefile.in (install-info): Rewrite to take advantage of VPATH, so FSF
distributions (with info files in $(srcdir)) install properly.
(DISTSTUFF): Build nlmheader.c too.
Ken Raeburn [Mon, 25 Oct 1993 17:01:57 +0000 (17:01 +0000)]
aoutx.h (reloc_type_lookup): Handle BFD_RELOC_SPARC_WDISP22.
Ken Raeburn [Mon, 25 Oct 1993 16:48:51 +0000 (16:48 +0000)]
bunch of changes...
Ken Raeburn [Mon, 25 Oct 1993 16:48:30 +0000 (16:48 +0000)]
keep diff1.s
Ken Raeburn [Mon, 25 Oct 1993 16:46:55 +0000 (16:46 +0000)]
new test case for relocations with addends
Ken Raeburn [Mon, 25 Oct 1993 16:45:26 +0000 (16:45 +0000)]
keep pic1.s
Ken Raeburn [Mon, 25 Oct 1993 16:40:44 +0000 (16:40 +0000)]
test case for relocations with addends
Ken Raeburn [Mon, 25 Oct 1993 16:39:21 +0000 (16:39 +0000)]
keep new sun4 dir
Ken Raeburn [Mon, 25 Oct 1993 16:35:23 +0000 (16:35 +0000)]
* ldlang.c (delete_output_file_on_failure): New variable.
(open_output): Set it after bfd open succeeds.
* ldmisc.c (vfinfo): Test it.
Changes from Peter Hoogenboom, hoogen@cs.utah.edu:
* ldsym.c (write_file_locals): Set the BSF_FILE flag for object symbols.
* ldemul.c: Support was added to allow emulation-specific processing to occur.
This support was added primarily for linker stub generation in the elf32-hppa
gld.
(ldemul_finish, ldemul_create_output_section_statements): New functions.
* ldemul.h: Support was added to allow emulation-specific processing to occur.
(As described above.) Added finish and create_output_section_statements fields
to ld_emulation_xfer_struct structure.
* ldlang.c: Add calls to emulation-specific routines.
(lang_process): Add call to ldemul_create_output_section_statements function.
(lang_process): Add call to a emulation-specific routine (and
some processing after the call).
Fred Fish [Mon, 25 Oct 1993 14:38:38 +0000 (14:38 +0000)]
Remove incorrect comment about SEC_HAS_CONTENTS not getting set.
Jim Kingdon [Mon, 25 Oct 1993 00:01:16 +0000 (00:01 +0000)]
* gdb.t00/{help.exp,default.exp}: Loosen up a few more tests which
just started failing because they depended on the order the
subcommands are presented, or exact docstring text. This kind of
test is a pain and has minimal benefit.
Jim Wilson [Sun, 24 Oct 1993 23:52:09 +0000 (23:52 +0000)]
Add support for .dword pseudo op to mips port.
Jim Kingdon [Sun, 24 Oct 1993 23:42:02 +0000 (23:42 +0000)]
Sun Oct 24 20:16:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* parse.c, parser-defs.h (write_exp_msymbol): New function to write
the appropriate expression for a minimal symbol.
* c-exp.y, m2-exp.y: Use it.
Jim Kingdon [Sun, 24 Oct 1993 18:05:39 +0000 (18:05 +0000)]
* remote-vx.c (vx_wait): Rename pid parameter to pid_to_wait_for.
Some compilers (legitimately) don't like variables in the
function's outermost block whose name is the name as a parameter.
Fred Fish [Sun, 24 Oct 1993 16:41:11 +0000 (16:41 +0000)]
* elfread.c (elf_symtab_read): Use bfd convention that both
initialized and uninitialized data sections have the SEC_ALLOC
flag bit set, but only initialized sections have SEC_LOAD set.
SEC_DATA is ignored since it only gets set for initialized
data. Likewise, SEC_HAS_CONTENTS is ignored now because it
never gets set.
David D. Zuhn [Sun, 24 Oct 1993 05:25:35 +0000 (05:25 +0000)]
use lowercase "format" instead of Format/format
David D. Zuhn [Sun, 24 Oct 1993 04:45:51 +0000 (04:45 +0000)]
remove debugging output accidentally checked in
David Edelsohn [Sat, 23 Oct 1993 22:10:28 +0000 (22:10 +0000)]
(sim_stop_signal): Result is now enum sim_stop.
David Edelsohn [Sat, 23 Oct 1993 22:03:52 +0000 (22:03 +0000)]
(sim_stop_signal): Result is now enum sim_stop.
David Edelsohn [Sat, 23 Oct 1993 21:56:47 +0000 (21:56 +0000)]
* remote-sim.h (sim_stop): New enum.
(sim_stop_signal): Change prototype, result is enum sim_stop.
* remote-sim.c (gdbsim_wait): Update call to sim_stop_signal.
Jim Kingdon [Sat, 23 Oct 1993 01:56:18 +0000 (01:56 +0000)]
* stabsread.c (define_symbol): Skip the whole thing about "pcc
promotion" on little-endian machines.
Jim Kingdon [Sat, 23 Oct 1993 01:14:47 +0000 (01:14 +0000)]
* remote-vx.c: Rename pid parameter to pid_to_wait_for. Some
compilers (legitimately) don't like variables in the function's
outermost block whose name is the name as a parameter.
Jim Kingdon [Fri, 22 Oct 1993 20:25:43 +0000 (20:25 +0000)]
Merge Apollo patches from Troy Rollo (troy@cbme.unsw.edu.au):
* dst.h, dstread.c, config/m68k/{apollo68b.mt,tm-apollo68b.h}:
New files.
* config/m68k/nm-apollo68b.h: Add more defines.
* configure.in: Recognize apollo target, not just host.
Ian Lance Taylor [Fri, 22 Oct 1993 19:15:20 +0000 (19:15 +0000)]
* input-scrub.c (physical_input_file, logical_input_file,
physical_input_line, logical_input_line): Made static.
(as_where): Return current file name and line number, don't print
them out.
* messages.c (as_show_where): New static function. Other
functions use it instead of as_where.
(as_bad_internal): New static function.
(as_bad): Use as_bad_internal.
(as_bad_where): New function, like as_bad but taking a file name
and line number.
* as.h (as_bad_where): Declare.
(as_where): Change prototype for new arguments.
* write.h (fixS): Added fields fx_file and fx_line.
* write.c (fix_new_internal): Save file and line number in fix.
(fixup_segment): Use as_bad_where, not as_bad.
* input-file.c (f_in, file_name): Made static.
* cond.c (struct file_line): Just use file and line fields.
(s_else): Use as_where and as_bad_where, not get_file_line and
set_file_line.
(get_file_line, set_file_line): Removed.
* listing.c (listing_newline): Use as_where.
* config/obj-coffbfd.c (obj_coff_init_stab_section): Use as_where.
* config/obj-ecoff.c (add_file): Use as_where.
* config/obj-elf.c (obj_elf_init_stab_section): Use as_where.
* config/tc-m68k.c (md_apply_fix_2): Use as_bad_where.
* config/tc-mips.c (tc_gen_reloc): Use as_bad_where, not assert.
Mark Eichin [Fri, 22 Oct 1993 18:15:53 +0000 (18:15 +0000)]
note change to fprintf declaration
Mark Eichin [Fri, 22 Oct 1993 18:14:21 +0000 (18:14 +0000)]
note TDEFINES setting of FPRINTF_ALREADY_DECLARED.
Mark Eichin [Fri, 22 Oct 1993 18:04:09 +0000 (18:04 +0000)]
hide declaration of fprintf inside FPRINTF_ALREADY_DECLARED, because
this declaration can be wrong but there must *be* a declaration for
include/dis-asm.h to work.
Jim Kingdon [Fri, 22 Oct 1993 16:03:08 +0000 (16:03 +0000)]
Merge Apollo patches from Troy Rollo (troy@cbme.unsw.edu.au):
* dst.h, dstread.c, config/m68k/{apollo68b.mt,tm-apollo68b.h}:
New files.
* config/m68k/nm-apollo68b.h: Add more defines.
* configure.in: Recognize apollo target, not just host.
Ian Lance Taylor [Fri, 22 Oct 1993 15:56:08 +0000 (15:56 +0000)]
* targets.c (target_vector): Enable MIPS ELF vectors.
Jim Kingdon [Fri, 22 Oct 1993 15:24:31 +0000 (15:24 +0000)]
new for apollo
Jim Kingdon [Fri, 22 Oct 1993 15:14:45 +0000 (15:14 +0000)]
new for apollo
Jim Kingdon [Fri, 22 Oct 1993 14:58:28 +0000 (14:58 +0000)]
* config.bfd: Use bigmips for mips-sony-bsd*.
Jim Kingdon [Fri, 22 Oct 1993 13:49:08 +0000 (13:49 +0000)]
* configure.in: Add * to end of all OS names.
Jim Kingdon [Fri, 22 Oct 1993 13:36:28 +0000 (13:36 +0000)]
* configure.host, config.bfd: Add * to end of all OS names.
Jim Kingdon [Fri, 22 Oct 1993 13:32:12 +0000 (13:32 +0000)]
* configure.in: Add * to end of all OS names.
Fred Fish [Fri, 22 Oct 1993 13:24:55 +0000 (13:24 +0000)]
* Makefile.in (ALLPARAM): Add config/m88k/xm-delta88v4.h
Jim Kingdon [Fri, 22 Oct 1993 06:08:04 +0000 (06:08 +0000)]
* munch: Removed.
Jim Kingdon [Fri, 22 Oct 1993 06:03:50 +0000 (06:03 +0000)]
* Makefile.in (init.c): Generate using the source, not munch. This
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
Jim Kingdon [Fri, 22 Oct 1993 05:55:58 +0000 (05:55 +0000)]
* Makefile.in (init.c): Generate using the source, not munch. This
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
Roland Pesch [Fri, 22 Oct 1993 04:58:26 +0000 (04:58 +0000)]
Man page for "run" simulator, and install-man target for it.
Jim Kingdon [Fri, 22 Oct 1993 01:49:27 +0000 (01:49 +0000)]
* Makefile.in: Update dependencies to reflect all these new includes.
Jim Kingdon [Fri, 22 Oct 1993 00:53:32 +0000 (00:53 +0000)]
* sh-tdep.c (sim_load): Add function.
David D. Zuhn [Thu, 21 Oct 1993 23:02:40 +0000 (23:02 +0000)]
add pid argument to mips_wait
Jim Kingdon [Thu, 21 Oct 1993 20:41:50 +0000 (20:41 +0000)]
* Makefile.in (c-exp.tab.o): Remove notice about shift/reduce conflicts
which no longer occur.
gcc -Wall lint:
* findvar.c (symbol_read_needs_frame), corelow.c (ignore),
inflow.c (gdb_has_a_terminal): Make sure to return a value.
* regex.h: Declare re_set_syntax.
* printcmd.c: Include valprint.h.
* infcmd.c, exec.c, maint.c, core.c: Include language.h.
* maint.c: Include expression.h.
* infrun.c, fork-child.c, corelow.c, inflow.c: Include thread.h.
* inftarg.c: Include command.h.
* coredep.c: Include value.h.
* c-exp.y, m2-exp.y, ch-exp.y: Include bfd.h, symfile.h and objfiles.h.
* ch-typeprint.c: Include typeprint.h.
* ch-valprint.c: Include c-lang.h.
* nlmread.c: Include buildsym.h.
* environ.c: Include gdbcore.h. Only include defs.h once.
(set_in_environ): Cast const char * to char * when passing to
set_gnutarget.
Remove unused variables:
* printcmd.c (printf_command): args_to_vprintf.
* coffread.c (coff_symfile_init): strsection.
Move variables to within the #ifdefs where they are used:
* symtab.c (gdb_mangle_name): opname.
* inftarg.c (child_attach): pid and exec_file.
* inftarg.c (child_detach): siggnal.
* objfiles.c (allocate_objfile): mapto, md, and fd.
* objfiles.c (free_objfile): mmfd.
* infrun.c (wait_for_inferior): Include BPSTAT_WHAT_LAST in switch.
* infrun.c (wait_for_inferior): Remove unused same_pid label.
* inferior.h: Declare set_sigint_trap and clear_sigint_trap.
* parser-defs.h: Declare write_exp_elt_block.
* stabsread.h: Declare elfstab_offset_sections and
coffstab_build_psymtabs.
Ken Raeburn [Thu, 21 Oct 1993 20:03:19 +0000 (20:03 +0000)]
Various arious PA changes from Utah.
V9 bugfix.
See changelog...
Ken Raeburn [Thu, 21 Oct 1993 19:55:01 +0000 (19:55 +0000)]
delete some code in "#if 0"
This page took 0.038904 seconds and 4 git commands to generate.