Ira Weiny [Wed, 10 Jun 2015 20:16:48 +0000 (16:16 -0400)]
IB/mad: Add final OPA MAD processing
For devices which support OPA MADs
1) Use previously defined SMP support functions.
2) Pass correct base version to ib_create_send_mad when processing OPA MADs.
3) Process out_mad_key_index returned by agents for a response. This is
necessary because OPA SMP packets must carry a valid pkey.
4) Carry the correct segment size (OPA vs IBTA) of RMPP messages within
ib_mad_recv_wc.
5) Handle variable length OPA MADs by:
* Adjusting the 'fake' WC for locally routed SMP's to represent the
proper incoming byte_len
* out_mad_size is used from the local HCA agents
1) when sending agent responses on the wire
2) when passing responses through the local_completions
function
NOTE: wc.byte_len includes the GRH length and therefore is different
from the in_mad_size specified to the local HCA agents.
out_mad_size should _not_ include the GRH length as it is added
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:34 +0000 (14:38 -0400)]
IB/mad: Add partial Intel OPA MAD support
Add OPA SMP processing functionality.
Define the new OPA SMP format, create support functions for this format using
the previously defined helper functions as appropriate.
These functions are defined in this patch and used in the final OPA MAD support
patch.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:33 +0000 (14:38 -0400)]
IB/mad: Add partial Intel OPA MAD support
This patch is the first of 3 which adds processing of OPA MADs
1) Add Intel Omni-Path Architecture defines
2) Increase max management version to accommodate OPA
3) update ib_create_send_mad
If the device supports OPA MADs and the MAD being sent is the OPA base
version alter the MAD size and sg lengths as appropriate
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:32 +0000 (14:38 -0400)]
IB/core: Add OPA MAD core capability flag
Add OPA MAD support flags to the core capability immutable flags. In addition
add the rdma_cap_opa_mad helper function for core functions to use to detect
OPA MAD support.
OPA MADs share a common header with IBTA MADs but with some differences for
increased performance.
Sharing a common header with IBTA MADs allows us to share most of the MAD
processing code when dealing with OPA MADs in addition to supporting some IBTA
MADs on OPA devices.
OPA MADs differ in the following ways:
1) MADs are variable size up to 2K
IBTA defined MADs remain fixed at 256 bytes
2) OPA SMPs must carry valid PKeys
3) OPA SMP packets are a different format
The MAD stack will use this new functionality to determine if OPA MAD
processing should occur on individual device ports.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:31 +0000 (14:38 -0400)]
IB/mad: Add support for additional MAD info to/from drivers
In order to support alternate sized MADs (and variable sized MADs on OPA
devices) add in/out MAD size parameters to the process_mad core call.
In addition, add an out_mad_pkey_index to communicate the pkey index the driver
wishes the MAD stack to use when sending OPA MAD responses.
The out MAD size and the out MAD PKey index are required by the MAD
stack to generate responses on OPA devices.
Furthermore, the in and out MAD parameters are made generic by specifying them
as ib_mad_hdr rather than ib_mad.
Drivers are modified as needed and are protected by BUG_ON flags if the MAD
sizes passed to them is incorrect.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:30 +0000 (14:38 -0400)]
IB/mad: Convert allocations from kmem_cache to kzalloc
This patch implements allocating alternate receive MAD buffers within the MAD
stack. Support for OPA to send/recv variable sized MADs is implemented later.
1) Convert MAD allocations from kmem_cache to kzalloc
kzalloc is more flexible to support devices with different sized MADs
and research and testing showed that the current use of kmem_cache does
not provide performance benefits over kzalloc.
2) Change struct ib_mad_private to use a flex array for the mad data
3) Allocate ib_mad_private based on the size specified by devices in
rdma_max_mad_size.
4) Carry the allocated size in ib_mad_private to be used when processing
ib_mad_private objects.
5) Alter DMA mappings based on the mad_size of ib_mad_private.
6) Replace the use of sizeof and static defines as appropriate
7) Add appropriate casts for the MAD data when calling processing
functions.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:29 +0000 (14:38 -0400)]
IB/core: Add ability for drivers to report an alternate MAD size.
Add max MAD size to the device immutable data set and have all drivers that
support MADs report the current IB MAD size (IB_MGMT_MAD_SIZE) to the core.
Verify MAD size data in both the MAD core and when reading the immutable data.
OPA drivers will report alternate MAD sizes in subsequent patches.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:28 +0000 (14:38 -0400)]
IB/mad: Support alternate Base Versions when creating MADs
In preparation to support the new OPA MAD Base version, add a base version
parameter to ib_create_send_mad and set it to IB_MGMT_BASE_VERSION for current
users.
Definition of the new base version and it's processing will occur in later
patches.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:27 +0000 (14:38 -0400)]
IB/mad: Create a generic helper for DR forwarding checks
IB and OPA SMPs share the same processing algorithm but have different header
formats and permissive LID detection.
Add a helper function which is generic to processing the DR forwarding checks which
can be used by both IB and OPA SMP code.
Use this function in the current IB function smi_check_forward_dr_smp.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:26 +0000 (14:38 -0400)]
IB/mad: Create a generic helper for DR SMP Recv processing
IB and OPA SMPs share the same processing algorithm but have different header
formats and permissive LID detection.
Add a helper function which is generic to processing DR SMP Recv messages which
can be used by both IB and OPA SMP code.
Use this function in the current IB function smi_handle_dr_smp_recv.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:25 +0000 (14:38 -0400)]
IB/mad: Create a generic helper for DR SMP Send processing
IB and OPA SMPs share the same processing algorithm but have different header
formats and permissive LID detection.
Add a helper function which is generic to processing DR SMP Send messages which
can be used by both IB and OPA SMP code.
Use this function in the current IB function smi_handle_dr_smp_send.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:24 +0000 (14:38 -0400)]
IB/mad: Split IB SMI handling from MAD Recv handler
Make a helper function to process Directed Route SMPs to be called by the IB
MAD Recv Handler, ib_mad_recv_done_handler.
This cleans up the MAD receive handler code a bit and allows for us to better
share the SMP processing code between IB and OPA SMPs.
IB and OPA SMPs share the same processing algorithm but have different header
formats and permissive LID detection. Therefore this and subsequent patches
split the common processing code from the IB specific code in anticipation of
sharing those algorithms with the OPA code.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:23 +0000 (14:38 -0400)]
IB/mad cleanup: Generalize processing of MAD data
ib_find_send_mad only needs access to the MAD header not the full IB MAD.
Change the local variable to ib_mad_hdr and change the corresponding cast.
This allows for clean usage of this function with both IB and OPA MADs because
OPA MADs carry the same header as IB MADs.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sat, 6 Jun 2015 18:38:22 +0000 (14:38 -0400)]
IB/mad cleanup: Clean up function params -- find_mad_agent
find_mad_agent only needs read only access to the MAD header. Update the
ib_mad pointer to be const ib_mad_hdr. Adjust call tree.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 11 Jun 2015 13:35:27 +0000 (16:35 +0300)]
IB/mlx4: Add support for CQ time-stamping
This includes:
* support allocation of CQ with the TIMESTAMP_COMPLETION creation flag.
* add timestamp_mask and hca_core_clock to query_device, reporting the
number of supported timestamp bits (mask) and the hca_core_clock frequency.
* return hca core clock's offset in query_device vendor's data,
this is needed in order to read the HCA's core clock.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 11 Jun 2015 13:35:26 +0000 (16:35 +0300)]
IB/mlx4: Add mmap call to map the hardware clock
In order to read the HCA's cycle counter efficiently in
user space, we need to map the HCA's register.
This is done through mmap call.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 11 Jun 2015 13:35:25 +0000 (16:35 +0300)]
IB/core: Pass hardware specific data in query_device
Vendors should be able to pass vendor specific data to/from
user-space via query_device uverb. In order to do this,
we need to pass the vendors' specific udata.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 11 Jun 2015 13:35:24 +0000 (16:35 +0300)]
IB/core: Add timestamp_mask and hca_core_clock to query_device
In order to expose timestamp we need to expose two new attributes in
query_device to be used for CQ completion time-stamping:
timestamp_mask - how many bits are valid in the timestamp, where timestamp
values could be 64bits the most.
hca_core_clock - timestamp is given in HW cycles, the frequency in KHZ units
of the HCA, necessary in order to convert cycles to seconds.
This is added both to ib_query_device and its respective uverbs counterpart.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 11 Jun 2015 13:35:23 +0000 (16:35 +0300)]
IB/core: Extend ib_uverbs_create_cq
ib_uverbs_ex_create_cq follows the extension verbs
mechanism. New features (for example, CQ creation flags
field which is added in a downstream patch) could used
via user-space libraries without breaking the ABI.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 11 Jun 2015 13:35:22 +0000 (16:35 +0300)]
IB/core: Add CQ creation time-stamping flag
Add CQ creation flag which dictates that the created CQ will report
completion time-stamp value in the WC.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 11 Jun 2015 13:35:21 +0000 (16:35 +0300)]
IB/core: Change ib_create_cq to use struct ib_cq_init_attr
Currently, ib_create_cq uses cqe and comp_vecotr instead
of the extendible ib_cq_init_attr struct.
Earlier patches already changed the vendors to work with
ib_cq_init_attr. This patch changes the consumers too.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 11 Jun 2015 13:35:20 +0000 (16:35 +0300)]
IB/core: Change provider's API of create_cq to be extendible
Add a new ib_cq_init_attr structure which contains the
previous cqe (minimum number of CQ entries) and comp_vector
(completion vector) in addition to a new flags field.
All vendors' create_cq callbacks are changed in order
to work with the new API.
This commit does not change any functionality.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> to patch #2
Signed-off-by: Doug Ledford <dledford@redhat.com>
Hariprasad S [Tue, 9 Jun 2015 12:53:12 +0000 (18:23 +0530)]
iw_cxgb4: support for bar2 qid densities exceeding the page size
Handle this configuration:
Queues Per Page * SGE BAR2 Queue Register Area Size > Page Size
Use cxgb4_bar2_sge_qregs() to obtain the proper location within the
bar2 region for a given qid.
Rework the DB and GTS write functions to make use of this bar2 info.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Hariprasad S [Tue, 9 Jun 2015 12:53:11 +0000 (18:23 +0530)]
cxgb4: Support for user mode bar2 mappings with T4
Enhance cxgb4_t4_bar2_sge_qregs() and cxgb4_bar2_sge_qregs() to support T4
user mode mappings. Update all the current users as well.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Thu, 11 Jun 2015 05:13:30 +0000 (01:13 -0400)]
Merge branch 'for-4.2-misc' into k.o/for-4.2
Colin Ian King [Fri, 5 Jun 2015 14:47:27 +0000 (15:47 +0100)]
RDMA/ocrdma: fix double free on pd
A reorganisation of the PD allocation and deallocation in commit
9ba1377daa ("RDMA/ocrdma: Move PD resource management to driver.")
introduced a double free on pd, as detected by static analysis by
smatch:
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:682 ocrdma_alloc_pd()
error: double free of 'pd'^
The original call to ocrdma_mbx_dealloc_pd() (which does not kfree
pd) was replaced with a call to _ocrdma_dealloc_pd() (which does
kfree pd). The kfree following this call causes the double free,
so just remove it to fix the problem.
Fixes: 9ba1377daa ("RDMA/ocrdma: Move PD resource management to driver.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Dan Carpenter [Thu, 4 Jun 2015 09:02:18 +0000 (12:02 +0300)]
IB/usnic: clean up some error handling code
This code causes a static checker warning:
drivers/infiniband/hw/usnic/usnic_uiom.c:476 usnic_uiom_alloc_pd()
warn: passing zero to 'PTR_ERR'
This code isn't buggy, but iommu_domain_alloc() doesn't return an error
pointer so we can simplify the error handling and silence the static
checker warning.
The static checker warning is to catch place which do:
if (!ptr)
return ERR_PTR(ptr);
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dave Goodell <dgoodell@cisco.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fabian Frederick [Wed, 10 Jun 2015 16:31:51 +0000 (18:31 +0200)]
IB/mthca: use swap() in mthca_make_profile()
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Moni Shoua [Wed, 10 Jun 2015 09:13:32 +0000 (12:13 +0300)]
IB/core: Don't warn on no SA support in event handler
Registering an event handler is done for a device. This device may have
one RoCE port (no SA cap) and one InfiniBand port (has SA cap).
Therefore, warning from the event handler about a specific port that
doesn't have SA cap is correct but pollutes the kernel log without a
need.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Moni Shoua [Wed, 10 Jun 2015 08:43:35 +0000 (11:43 +0300)]
IB/core: Don't advertise SA in RoCE port capabilities
The Subnet Administrator (SA) is not a component of the RoCE spec.
Therefore, it should not be a capability of a RoCE port.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Tue, 2 Jun 2015 13:33:22 +0000 (09:33 -0400)]
Merge branch 'for-4.2-misc' into k.o/for-4.2
Ira Weiny [Sun, 31 May 2015 21:15:31 +0000 (17:15 -0400)]
IB/core cleanup: Add const to args - agent_send_response
In order to support constant callers of agent_send_response we add const
specifiers to the its pointer arguments.
Adjust the call tree accordingly.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sun, 31 May 2015 21:15:30 +0000 (17:15 -0400)]
IB/core cleanup: Add const on args - device->process_mad
The process_mad device function declares some parameters as "in". Make those
parameters const and adjust the call tree under process_mad in the various
drivers accordingly.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Sun, 31 May 2015 21:15:29 +0000 (17:15 -0400)]
IB/core cleanup: Add const to RDMA helpers
The ib_device passed to the new RDMA helpers is constant. Declare the
ib_device as const in the following functions.
rdma_protocol_ib
rdma_protocol_roce
rdma_protocol_iwarp
rdma_ib_or_roce
rdma_cap_ib_mad
rdma_cap_ib_smi
rdma_cap_ib_cm
rdma_cap_iw_cm
rdma_cap_ib_sa
rdma_cap_ib_mcast
rdma_cap_af_ib
rdma_cap_eth_ah
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Roland Dreier [Sat, 30 May 2015 06:11:27 +0000 (23:11 -0700)]
IB/mlx4: Fix error paths in mlx4_ib_create_flow()
The unwinding clean up code are err_create_flow starts at the current
index i. That means we shouldn't increment i until we're really sure
we won't have to destroy the current flow; otherwise we might
increment the index, fail inside an is_bonded block, and end up
accessing off the end of the reg_id[] array.
This was detected by Coverity (CID
1271229).
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Roland Dreier [Sat, 30 May 2015 06:10:31 +0000 (23:10 -0700)]
RDMA/ocrdma: Fix memory leak in _ocrdma_alloc_pd()
If ocrdma_get_pd_num() fails, then we need to free the pd struct we allocated.
This was detected by Coverity (CID
1271245).
Signed-off-by: Roland Dreier <roland@purestorage.com>
Acked-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Wengang Wang [Thu, 21 May 2015 05:11:40 +0000 (13:11 +0800)]
rds: re-entry of rds_ib_xmit/rds_iw_xmit
The BUG_ON at line 452/453 is triggered in function rds_send_xmit.
441 while (ret) {
442 tmp = min_t(int, ret, sg->length -
443 conn->c_xmit_data_off);
444 conn->c_xmit_data_off += tmp;
445 ret -= tmp;
446 if (conn->c_xmit_data_off == sg->length) {
447 conn->c_xmit_data_off = 0;
448 sg++;
449 conn->c_xmit_sg++;
450 if (ret != 0 && conn->c_xmit_sg == rm->data.op_nents)
451 printk(KERN_ERR "conn %p rm %p sg %p ret %d\n", conn, rm, sg, ret);
452 BUG_ON(ret != 0 &&
453 conn->c_xmit_sg == rm->data.op_nents);
454 }
455 }
it is complaining the total sent length is bigger that we want to send.
rds_ib_xmit() is wrong for the second entry for the same rds_message returning
wrong value.
the sg and off passed by rds_send_xmit to rds_ib_xmit is based on
scatterlist.offset/length, but the rds_ib_xmit action is based on
scatterlist.dma_address/dma_length. in case dma_length is larger than length
there is problem. for the 2nd and later entries of rds_ib_xmit for same
rds_message, at least one of the following two is wrong:
1) the scatterlist to start with, the choosen one can far beyond the correct
one.
2) the offset to start with within the scatterlist.
fix:
add op_dmasg and op_dmaoff to rm_data_op structure indicating the scatterlist
and offset within the it to start with for rds_ib_xmit respectively. op_dmasg
and op_dmaoff are initialized to zero when doing dma mapping for the first see
of the message and are changed when filling send slots.
the same applies to rds_iw_xmit too.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Tue, 26 May 2015 13:03:48 +0000 (15:03 +0200)]
IB/ipoib: Fix RCU annotations in ipoib_neigh_hash_init()
Avoid that sparse complains about ipoib_neigh_hash_init(). This
patch does not change any functionality. See also patch "IPoIB:
Fix memory leak in the neigh table deletion flow" (commit ID
66172c09938b).
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Faisal Latif [Mon, 18 May 2015 20:28:14 +0000 (15:28 -0500)]
RDMA/nes: Enable the use of the tos field in the nes driver
RDMA/nes: Enable the use of the tos field in the nes driver
Signed-off-by: Faisal Latif <Faisal.Latif@intel.com>
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Mon, 18 May 2015 20:27:10 +0000 (15:27 -0500)]
RDMA/iw_cm: Export tos field to iwarp providers
rdma-cma/iw_cm: Export tos field to iwarp providers
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Wed, 20 May 2015 20:12:40 +0000 (16:12 -0400)]
Merge branches 'bart-srp', 'generic-errors', 'ira-cleanups' and 'mwang-v8' into k.o/for-4.2
Ira Weiny [Thu, 14 May 2015 19:01:46 +0000 (15:01 -0400)]
IB/core: Change rdma_protocol_iboe to roce
After discussion upstream, it was agreed to transition the usage of iboe
in the kernel to roce. This keeps our terminology consistent with what
was finalized in the IBTA Annex 16 and IBTA Annex 17 publications.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Thu, 14 May 2015 00:02:59 +0000 (20:02 -0400)]
IB/core: Convert core to use bitfield for caps
Remove query_protocol callback
Use the new Core Capability bits for:
rdma_protocol_*
rdma_cap_ib_mad
rdma_cap_ib_smi
rdma_cap_ib_cm
rdma_cap_iw_cm
rdma_cap_ib_sa
rdma_cap_ib_mcast
rdma_cap_af_ib
rdma_cap_eth_ah
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Thu, 14 May 2015 00:02:58 +0000 (20:02 -0400)]
IB/core: Add per port immutable struct to ib_device
As of commit
5eb620c81ce3 "IB/core: Add helpers for uncached GID and P_Key
searches"; pkey_tbl_len and gid_tbl_len are immutable data which are stored in
the ib_device.
The per port core capability flags to be added later are also immutable data to
be stored in the ib_device object.
In preparation for this create a structure for per port immutable data and
place the pkey and gid table lengths within this structure.
"get_port_immutable" is added as a mandatory device function to allow the
drivers to fill in this data.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Thu, 14 May 2015 00:02:57 +0000 (20:02 -0400)]
IB/user_mad: Fix buggy usage of port index
The addition of the rdma_cap_ib_mad is technically broken in ib_umad_remove_one
because the loop "i" value is not a port value.
This bug resulted in the ib_umad failing to properly remove its resources when
the core capability functions were converted to bit fields.
NOTE:
e17371d73908 did not result in broken behavior on its own. It was only
an issue when the implementation of rdma_cap_ib_mad was changed.
Pass the port value to rdma_cap_ib_mad.
Fixes: e17371d73908 ("IB/Verbs: Use management helper rdma_cap_ib_mad()")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Thu, 14 May 2015 00:02:56 +0000 (20:02 -0400)]
IB/user_mad: Use new start/end port functions
Use the new common rdma_[start|end]_port functions instead of using
local variables and figuring it out on the fly.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Fri, 8 May 2015 18:27:24 +0000 (14:27 -0400)]
IB/mad: Add const qualifiers to query only functions
The following functions only need read access to the data passed to them.
ib_mad_kernel_rmpp_agent
is_rmpp_data_mad
rcv_has_same_gid
ib_find_send_mad
Clarify with const specifiers
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Fri, 8 May 2015 18:27:23 +0000 (14:27 -0400)]
IB/mad: Clean up rcv_has_same_class
rcv_has_same_class only needs access to the MAD header
specify WR and Receive WC as const
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Fri, 8 May 2015 18:27:22 +0000 (14:27 -0400)]
IB/mad: Change ib_response_mad signature arguments
ib_response_mad only needs read access to the MAD header, not write access
to the entire mad struct, so replace struct ib_mad with const struct
ib_mad_hdr
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Fri, 8 May 2015 18:27:21 +0000 (14:27 -0400)]
IB/mad: Change validate_mad signature arguments
validate_mad only needs read access to the MAD header, not write access
to the entire mad struct, so replace struct ib_mad with const struct
ib_mad_hdr
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sagi Grimberg [Mon, 18 May 2015 10:40:33 +0000 (13:40 +0300)]
RDS: Switch to generic logging helpers
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sagi Grimberg [Mon, 18 May 2015 10:40:32 +0000 (13:40 +0300)]
xprtrdma, svcrdma: Switch to generic logging helpers
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sagi Grimberg [Mon, 18 May 2015 10:40:31 +0000 (13:40 +0300)]
iser-target: Align to generic logging helpers
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sagi Grimberg [Mon, 18 May 2015 10:40:30 +0000 (13:40 +0300)]
IB/iser: Align to generic logging helpers
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sagi Grimberg [Mon, 18 May 2015 10:40:29 +0000 (13:40 +0300)]
IB/srp: Align to generic logging helpers
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sagi Grimberg [Mon, 18 May 2015 10:40:28 +0000 (13:40 +0300)]
IB/core, cma: Nice log-friendly string helpers
Some of us keep revisiting the code to decode enumerations that
appear in out logs. Let's borrow the nice logging helpers that
exists in xprtrdma and rds for CMA events, IB events and WC statuses.
Reviewd-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:27:14 +0000 (13:27 +0200)]
IB/srp: Add 64-bit LUN support
The SCSI standard defines 64-bit values for LUNs. Large arrays
employing large or hierarchical LUN numbers become more and more
common. So update the SRP initiator to use 64-bit LUN numbers.
See also Hannes Reinecke, commit
9cb78c16f5da ("scsi: use 64-bit LUNs"),
June 2014.
The largest LUN number that has been tested is 0xd2003fff00000000.
Checked the following structure sizes with gdb:
* sizeof(struct srp_cmd) = 48
* sizeof(struct srp_tsk_mgmt) = 48
* sizeof(struct srp_aer_req) = 36
The ibmvscsi changes have been compile tested only (on a PPC system).
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:26:17 +0000 (13:26 +0200)]
IB/srp: Remove !ch->target tests from the reconnect code
Remove the !ch->target tests from the reconnect code. These
tests are not needed: upon entry of srp_rport_reconnect()
it is guaranteed that all ch->target pointers are non-NULL.
None of the functions srp_new_cm_id(), srp_finish_req(),
srp_create_ch_ib() nor srp_connect_ch() modifies this pointer.
srp_free_ch_ib() is never called concurrently with
srp_rport_reconnect().
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:25:54 +0000 (13:25 +0200)]
IB/srp: Remove a superfluous check from srp_free_req_data()
The function srp_free_req_data() does not use ch->target.
Hence remove the ch->target != NULL check.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:25:27 +0000 (13:25 +0200)]
IB/srp: Rearrange module description
Move the module version and release date into separate fields.
This makes the modinfo output easier to read.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:25:10 +0000 (13:25 +0200)]
IB/srp: Remove superfluous casts
A long time ago the data type int64_t was declared as long long
on x86 systems and as long on PPC systems. Today that data type
is declared as long long on all Linux architectures. This means
that the casts from uint64_t into unsigned long long are
superfluous. Remove these superfluous casts.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:24:38 +0000 (13:24 +0200)]
scsi_transport_srp: Reduce failover time
Unlike FC, there is no risk that SCSI devices will be offlined
by the SCSI error handler if the SCSI error handler is started
while a reconnect attempt is ongoing. Hence report timeout errors
as soon as possible if a higher software layer (e.g. multipathd)
needs to be informed about a timeout. It is assumed that if both
fast_io_fail_tmo < 0 and rport->dev_loss_tmo < 0 that this means
that there is no need to report timeouts quickly.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:24:17 +0000 (13:24 +0200)]
IB/srp: Fix reconnection failure handling
Although it is possible to let SRP I/O continue if a reconnect
results in a reduction of the number of channels, the current
code does not handle this scenario correctly. Instead of making
the reconnect code more complex, consider this as a reconnection
failure.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.19
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:23:57 +0000 (13:23 +0200)]
IB/srp: Fix connection state tracking
Reception of a DREQ message only causes the state of a single
channel to change. Hence move the 'connected' member variable
from the target to the channel data structure. This patch
avoids that following false positive warning can be reported
by srp_destroy_qp():
WARNING: at drivers/infiniband/ulp/srp/ib_srp.c:617 srp_destroy_qp+0xa6/0x120 [ib_srp]()
Call Trace:
[<
ffffffff8106e10f>] warn_slowpath_common+0x7f/0xc0
[<
ffffffff8106e16a>] warn_slowpath_null+0x1a/0x20
[<
ffffffffa0440226>] srp_destroy_qp+0xa6/0x120 [ib_srp]
[<
ffffffffa0440322>] srp_free_ch_ib+0x82/0x1e0 [ib_srp]
[<
ffffffffa044408b>] srp_create_target+0x7ab/0x998 [ib_srp]
[<
ffffffff81346f60>] dev_attr_store+0x20/0x30
[<
ffffffff811dd90f>] sysfs_write_file+0xef/0x170
[<
ffffffff8116d248>] vfs_write+0xc8/0x190
[<
ffffffff8116d411>] sys_write+0x51/0x90
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.19
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:23:36 +0000 (13:23 +0200)]
IB/srp: Fix a connection setup race
Avoid that receiving a DREQ while RDMA channels are being
established causes target->qp_in_error to be reset.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.19
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:23:14 +0000 (13:23 +0200)]
IB/srp: Remove an extraneous scsi_host_put() from an error path
Fix a scsi_get_host() / scsi_host_put() imbalance in the error
path of srp_create_target(). See also patch "IB/srp: Avoid that
I/O hangs due to a cable pull during LUN scanning" (commit ID
34aa654ecb8e).
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.19
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:22:44 +0000 (13:22 +0200)]
scsi_transport_srp: Fix a race condition
Avoid that srp_terminate_io() can get invoked while srp_queuecommand()
is in progress. This patch avoids that an I/O timeout can trigger the
following kernel warning:
WARNING: at drivers/infiniband/ulp/srp/ib_srp.c:1447 srp_terminate_io+0xef/0x100 [ib_srp]()
Call Trace:
[<
ffffffff814c65a2>] dump_stack+0x4e/0x68
[<
ffffffff81051f71>] warn_slowpath_common+0x81/0xa0
[<
ffffffff8105204a>] warn_slowpath_null+0x1a/0x20
[<
ffffffffa075f51f>] srp_terminate_io+0xef/0x100 [ib_srp]
[<
ffffffffa07495da>] __rport_fail_io_fast+0xba/0xc0 [scsi_transport_srp]
[<
ffffffffa0749a90>] rport_fast_io_fail_timedout+0xe0/0xf0 [scsi_transport_srp]
[<
ffffffff8106e09b>] process_one_work+0x1db/0x780
[<
ffffffff8106e75b>] worker_thread+0x11b/0x450
[<
ffffffff81073c64>] kthread+0xe4/0x100
[<
ffffffff814cf26c>] ret_from_fork+0x7c/0xb0
See also patch "scsi_transport_srp: Add transport layer error
handling" (commit ID
29c17324803c).
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.13
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 18 May 2015 11:22:19 +0000 (13:22 +0200)]
scsi_transport_srp: Introduce srp_wait_for_queuecommand()
Introduce the helper function srp_wait_for_queuecommand().
Move the definition of scsi_request_fn_active(). Add a comment
above srp_wait_for_queuecommand() that support for scsi-mq needs
to be added.
This patch does not change any functionality. A second call to
srp_wait_for_queuecommand() will be introduced in the next patch.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.13
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Fri, 8 May 2015 17:10:04 +0000 (13:10 -0400)]
IB/mad: Clean up comments in smi.c
Return values of 0 do not make sense for functions which return enum
smi_action
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Fri, 8 May 2015 17:10:03 +0000 (13:10 -0400)]
IB/mad: Rename is_data_mad to is_rmpp_data_mad
is_rmpp_data_mad is more descriptive for this function.
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ira Weiny [Thu, 14 May 2015 00:02:55 +0000 (20:02 -0400)]
IB/core: Create common start/end port functions
Previously start_port and end_port were defined in 2 places, cache.c and
device.c and this prevented their use in other modules.
Make these common functions, change the name to reflect the rdma
name space, and update existing users.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Mon, 18 May 2015 08:41:45 +0000 (10:41 +0200)]
IB/Verbs: Improve docs for rdma-helpers
Increase the level of documentation for the rdma_cap_* helpers
introduced by Michael Wang <yun.wang@profitbricks.com>.
This patch is loosely based on a patch Michael wrote to enhance the
documentation of these functions, but has been significantly modified
in terms of verbiage. In addition, the comments were moved from a kernel
Documentation/infiniband/ file to being inline in the header file itself
for the functions in question. Finally, the documentation was formated
in proper kdoc format.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:40 +0000 (14:50 +0200)]
IB/Verbs: Use management helper rdma_cap_eth_ah()
Introduce helper rdma_cap_eth_ah() to help us check if the port of an
IB device support Ethernet Address Handler.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:39 +0000 (14:50 +0200)]
IB/Verbs: Use management helper rdma_cap_af_ib()
Introduce helper rdma_cap_af_ib() to help us check if the port of an
IB device support Native Infiniband Address.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:38 +0000 (14:50 +0200)]
IB/Verbs: Use management helper rdma_cap_read_multi_sge()
Introduce helper rdma_cap_read_multi_sge() to help us check if the port of an
IB device support RDMA Read Multiple Scatter-Gather Entries.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:37 +0000 (14:50 +0200)]
IB/Verbs: Use management helper rdma_cap_ib_mcast()
Introduce helper rdma_cap_ib_mcast() to help us check if the port of an
IB device support Infiniband Multicast.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:36 +0000 (14:50 +0200)]
IB/Verbs: Use management helper rdma_cap_ib_sa()
Introduce helper rdma_cap_ib_sa() to help us check if the port of an
IB device support Infiniband Subnet Administration.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:35 +0000 (14:50 +0200)]
IB/Verbs: Use management helper rdma_cap_iw_cm()
Introduce helper rdma_cap_iw_cm() to help us check if the port of an
IB device support IWARP Communication Manager.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:34 +0000 (14:50 +0200)]
IB/Verbs: Use management helper rdma_cap_ib_cm()
Introduce helper rdma_cap_ib_cm() to help us check if the port of an
IB device support Infiniband Communication Manager.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:33 +0000 (14:50 +0200)]
IB/Verbs: Use management helper rdma_cap_ib_smi()
Introduce helper rdma_cap_ib_smi() to help us check if the port of an
IB device support Infiniband Subnet Management Interface.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:32 +0000 (14:50 +0200)]
IB/Verbs: Use management helper rdma_cap_ib_mad()
Introduce helper rdma_cap_ib_mad() to help us check if the port of an
IB device support Infiniband Management Datagrams.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:31 +0000 (14:50 +0200)]
IB/Verbs: Reform rest part in IB-core cma
Use raw management helpers to reform rest part in IB-core cma.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:30 +0000 (14:50 +0200)]
IB/Verbs: Reform cma_acquire_dev()
Reform cma_acquire_dev() with management helpers, introduce
cma_validate_port() to make the code more clean.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:29 +0000 (14:50 +0200)]
IB/Verbs: Reform mcast related part in IB-core cma
Use raw management helpers to reform mcast related part in IB-core cma.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:28 +0000 (14:50 +0200)]
IB/Verbs: Reform route related part in IB-core cma
Use raw management helpers to reform route related part in IB-core cma.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:27 +0000 (14:50 +0200)]
IB/Verbs: Reform cm related part in IB-core cma/ucm
Use raw management helpers to reform cm related part in IB-core cma/ucm.
Few checks focus on the device cm type rather than the port capability,
directly pass port 1 works currently, but can't support mixing cm type
device in future.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:26 +0000 (14:50 +0200)]
IB/Verbs: Reform IB-core verbs
Use raw management helpers to reform IB-core verbs
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:25 +0000 (14:50 +0200)]
IB/Verbs: Reform IB-ulp xprtrdma
Use raw management helpers to reform IB-ulp xprtrdma.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:24 +0000 (14:50 +0200)]
IB/Verbs: Reform IB-ulp ipoib
Use raw management helpers to reform IB-ulp ipoib.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:23 +0000 (14:50 +0200)]
IB/Verbs: Reform IB-core multicast
Use raw management helpers to reform IB-core multicast.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:22 +0000 (14:50 +0200)]
IB/Verbs: Reform IB-core sa_query
Use raw management helpers to reform IB-core sa_query.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:21 +0000 (14:50 +0200)]
IB/Verbs: Reform IB-core cm
Use raw management helpers to reform IB-core cm.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:20 +0000 (14:50 +0200)]
IB/Verbs: Reform IB-core mad/agent/user_mad
Use raw management helpers to reform IB-core mad/agent/user_mad.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:19 +0000 (14:50 +0200)]
IB/Verbs: Implement raw management helpers
Add raw helpers:
rdma_protocol_ib
rdma_protocol_iboe
rdma_protocol_iwarp
rdma_ib_or_iboe (transition, clean up later)
To help us detect which technology the port supported.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Wang [Tue, 5 May 2015 12:50:18 +0000 (14:50 +0200)]
IB/Verbs: Implement new callback query_protocol()
Add new callback query_protocol() and implement for each HW.
Mapping List:
node-type link-layer transport protocol
nes RNIC ETH IWARP IWARP
amso1100 RNIC ETH IWARP IWARP
cxgb3 RNIC ETH IWARP IWARP
cxgb4 RNIC ETH IWARP IWARP
usnic USNIC_UDP ETH USNIC_UDP USNIC_UDP
ocrdma IB_CA ETH IB IBOE
mlx4 IB_CA IB/ETH IB IB/IBOE
mlx5 IB_CA IB IB IB
ehca IB_CA IB IB IB
ipath IB_CA IB IB IB
mthca IB_CA IB IB IB
qib IB_CA IB IB IB
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Linus Torvalds [Mon, 18 May 2015 17:13:47 +0000 (10:13 -0700)]
Linux 4.1-rc4
Peter Zijlstra [Mon, 18 May 2015 09:31:50 +0000 (11:31 +0200)]
watchdog: Fix merge 'conflict'
Two watchdog changes that came through different trees had a non
conflicting conflict, that is, one changed the semantics of a variable
but no actual code conflict happened. So the merge appeared fine, but
the resulting code did not behave as expected.
Commit
195daf665a62 ("watchdog: enable the new user interface of the
watchdog mechanism") changes the semantics of watchdog_user_enabled,
which thereafter is only used by the functions introduced by
b3738d293233 ("watchdog: Add watchdog enable/disable all functions").
There further appears to be a distinct lack of serialization between
setting and using watchdog_enabled, so perhaps we should wrap the
{en,dis}able_all() things in watchdog_proc_mutex.
This patch fixes a s2r failure reported by Michal; which I cannot
readily explain. But this does make the code internally consistent
again.
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 18 May 2015 17:01:54 +0000 (10:01 -0700)]
Merge tag 'for-linus-
20150516' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Two MTD fixes for 4.1:
- readtest: the signal-handling code was clobbering the error codes
we should be handling/reporting in this test, rendering it useless.
Noticed by Coverity.
- the common SPI NOR flash DT binding (merged for 4.1-rc1) is being
revised, so let's change that before 4.1 is minted"
* tag 'for-linus-
20150516' of git://git.infradead.org/linux-mtd:
Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
mtd: readtest: don't clobber error reports
Linus Torvalds [Sun, 17 May 2015 04:15:59 +0000 (21:15 -0700)]
Merge tag 'usb-4.1-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes and new device ids for 4.1-rc4.
All are pretty minor, and have been in linux-next successfully"
* tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
Added another USB product ID for ELAN touchscreen quirks.
xhci: gracefully handle xhci_irq dead device
xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
xhci: fix isoc endpoint dequeue from advancing too far on transaction error
usb: chipidea: debug: avoid out of bound read
USB: visor: Match I330 phone more precisely
USB: pl2303: Remove support for Samsung I330
USB: cp210x: add ID for KCF Technologies PRN device
usb: gadget: remove incorrect __init/__exit annotations
usb: phy: isp1301: work around tps65010 dependency
usb: gadget: serial: fix re-ordering of tx data
usb: gadget: hid: Fix static variable usage
usb: gadget: configfs: Fix interfaces array NULL-termination
usb: gadget: xilinx: fix devm_ioremap_resource() check
usb: dwc3: dwc3-omap: correct the register macros
Linus Torvalds [Sun, 17 May 2015 04:10:05 +0000 (21:10 -0700)]
Merge tag 'tty-4.1-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here's some TTY and serial driver fixes for reported issues.
All of these have been in linux-next successfully"
* tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pty: Fix input race when closing
tty/n_gsm.c: fix a memory leak when gsmtty is removed
Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
serial: omap: Fix error handling in probe
earlycon: Revert log warnings
This page took 0.047234 seconds and 5 git commands to generate.