Andreas Schwab [Tue, 6 Jul 2010 16:17:44 +0000 (16:17 +0000)]
* breakpoint.c (_initialize_breakpoint): Add "cl" as alias for
"clear".
Ulrich Weigand [Tue, 6 Jul 2010 12:56:24 +0000 (12:56 +0000)]
include/ChangeLog:
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* floatformat.h (floatformat_ieee_half_big): Add declaration.
(floatformat_ieee_half_little): Likewise.
libiberty/ChangeLog:
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* floatformat.c (floatformat_ieee_half_big): New variable.
(floatformat_ieee_half_little): Likewise.
gdb/ChangeLog:
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* gdbtypes.h (floatformats_ieee_half): Add declaration.
* gdbtypes.c (floatformats_ieee_half): New variable.
* doublest.c (floatformat_from_length): Set format to
gdbarch_half_format if length matches.
* gdbarch.sh (half_bit): New architecture method.
(half_format): Likewise.
* gdbarch.h: Regenerate.
* gdbarch.c: Likewise.
Alan Modra [Tue, 6 Jul 2010 09:29:47 +0000 (09:29 +0000)]
bfd/
* elf32-ppc.c (ppc_elf_relax_section): Insert branch around
trampolines only for .init and .fini sections.
ld/testsuite/
* ld-powerpc/relax.s: Add branch back to _start.
* ld-powerpc/relax.d: Update.
* ld-powerpc/relaxr.d: Update.
Alan Modra [Tue, 6 Jul 2010 09:24:05 +0000 (09:24 +0000)]
* readelf.c (uncompress_section_contents): Avoid gcc-4.6 warning.
Maciej W. Rozycki [Tue, 6 Jul 2010 00:12:42 +0000 (00:12 +0000)]
gas/
* config/tc-mips.c (mips_frob_file): Use symbol_same_p to match
symbols.
gas/testsuite/
* gas/mips/elf-rel27.d: New test for HI16/LO16 relocation
pairing.
* gas/mips/elf-rel27.s: Source for the new test.
* gas/mips/mips.exp: Create "mips16" architecture. Adjust
conditions involving negated properties throughout to require
"mips1" as appropriate. Run the new test.
(mips_arch_destroy): New procedure.
Maciej W. Rozycki [Tue, 6 Jul 2010 00:06:04 +0000 (00:06 +0000)]
* mips-dis.c (print_insn_mips): Correct branch instruction type
determination.
Maciej W. Rozycki [Tue, 6 Jul 2010 00:02:46 +0000 (00:02 +0000)]
gas/
* config/tc-mips.c (nops_for_insn_or_target): Replace
MIPS16_INSN_BRANCH with MIPS16_INSN_UNCOND_BRANCH and
MIPS16_INSN_COND_BRANCH.
include/opcode/
* mips.h (MIPS16_INSN_UNCOND_BRANCH): New macro.
(MIPS16_INSN_BRANCH): Rename to...
(MIPS16_INSN_COND_BRANCH): ... this.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Remove branch instruction
type and delay slot determination.
(print_insn_mips16): Extend branch instruction type and delay
slot determination to cover all instructions.
* mips16-opc.c (BR): Remove macro.
(UBR, CBR): New macros.
(mips16_opcodes): Update branch annotation for "b", "beqz",
"bnez", "bteqz" and "btnez". Add branch annotation for "jalrc"
and "jrc".
Alan Modra [Tue, 6 Jul 2010 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Tue, 6 Jul 2010 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Maciej W. Rozycki [Mon, 5 Jul 2010 23:57:27 +0000 (23:57 +0000)]
* gas/mips/mips.exp (run_dump_test_arch): Check for the presence
of an architecture-specific test first and use it if found,
before falling back to the generic one.
Maciej W. Rozycki [Mon, 5 Jul 2010 23:55:24 +0000 (23:55 +0000)]
* gas/mips/mips4-fp.d, gas/mips/mips4-fp.s: Remove checks for
branch-likely instructions and place them...
* gas/mips/mips4-branch-likely.d, gas/mips/mips4-branch-likely.s:
... in this new test.
* gas/mips/mips4-fp.l: Update accordingly.
* gas/mips/mips4-branch-likely.l: New stderr output for the new
test.
* gas/mips/mips.exp (mips4-branch-likely): Run a dump test and
a list test with mips4-branch-likely similarly to mips4-fp.
Maciej W. Rozycki [Mon, 5 Jul 2010 23:46:21 +0000 (23:46 +0000)]
* gas/mips/beq.d, gas/mips/beq.s: Remove checks for
branch-likely instructions.
* gas/mips/bge.d, gas/mips/bge.s: Likewise.
* gas/mips/bgeu.d, gas/mips/bgeu.s: Likewise.
* gas/mips/blt.d, gas/mips/blt.s: Likewise.
* gas/mips/bltu.d, gas/mips/bltu.s: Likewise.
* gas/mips/branch-likely.d, gas/mips/branch-likely.s: New test,
collecting checks for branch-likely instructions removed from
the above.
* gas/mips/mips.exp: Run the new test and update the
constraints for the updated tests to include MIPS I.
Maciej W. Rozycki [Mon, 5 Jul 2010 23:38:01 +0000 (23:38 +0000)]
* gas/mips/mips4-fp.d: Reformat.
Maciej W. Rozycki [Mon, 5 Jul 2010 23:35:29 +0000 (23:35 +0000)]
* gas/mips/beq.d: Reformat.
* gas/mips/bge.d, gas/mips/bgeu.d: Likewise.
* gas/mips/blt.d, gas/mips/bltu.d: Likewise.
Maciej W. Rozycki [Mon, 5 Jul 2010 23:31:53 +0000 (23:31 +0000)]
* gas/mips/beq.d: Remove leftover symbols/relocs from the
change on 2009-02-06.
Jan Kratochvil [Mon, 5 Jul 2010 18:04:33 +0000 (18:04 +0000)]
gdb/
Fix re-run of PIE executable, PR shlibs/11776.
* solib-svr4.c (svr4_relocate_main_executable) <symfile_objfile>: Remove
the part of pre-set SYMFILE_OBJFILE->SECTION_OFFSETS.
gdb/testsuite/
Fix re-run of PIE executable, PR shlibs/11776.
* gdb.base/break-interp.exp (test_ld): Turn off "disable-randomization".
Remove $displacement_main to match the solib-svr4.c change. New "kill"
and re-"run" of the inferior.
Jan Kratochvil [Mon, 5 Jul 2010 18:02:56 +0000 (18:02 +0000)]
gdb/testsuite/
Cope with missing /usr/sbin/prelink.
* lib/prelink-support.exp (prelink_no):
<result == 1 && $output is "no such file or directory">: New.
(prelink_yes): Likewise. Return on failed prelink_no.
Jan Kratochvil [Mon, 5 Jul 2010 18:01:53 +0000 (18:01 +0000)]
gdb/testsuite/
* gdb.base/attach-pie-misread.exp: Load prelink-support.exp. Replace
build_executable by build_executable_own_libs. Replace "prelink -R"
execution by a call of prelink_yes. Comment why "prelink -r" needs no
change.
* gdb.base/break-interp.exp: Load prelink-support.exp. Rename calls of
copy to file_copy. Move setting opts --dynamic-linker and -rpath,
mkdir $dir and ldd its parsing and copying to lib/prelink-support.exp.
Replace build_executable by build_executable_own_libs's function
build_executable_own_libs.
(prelinkNO): Create new stub to call prelink_no.
(prelinkYES): Create new stub to call prelink_yes.
(test_attach): Rename calls of copy to file_copy.
(section_get, prelinkNO_run, prelinkNO, prelinkYES, symlink_resolve)
(copy): Move to ...
* lib/prelink-support.exp: ... a new file. Rename prelinkNO to
prelink_no, prelinkYES to prelink_yes, copy to file_copy.
* gdb.base/prelink.exp: Disable testcase also for is_remote and
skip_shlib_tests. Load prelink-support.exp. Replace gdb_compile with
special flags by gdb_compile_shlib. Replace second gdb_compile by
build_executable_own_libs. Replace "prelink -R" execution by a call of
prelink_yes. Replace "prelink -u" and second "prelink -R" execution by
a second call of prelink_yes. Replace restart commands by
clean_restart.
(prelink): Rename to ...
(seen displacement message): ... this test. Extend its expectation
strictness.
Jan Kratochvil [Mon, 5 Jul 2010 18:00:40 +0000 (18:00 +0000)]
gdb/
* auxv.c (memory_xfer_auxv): Update attach comment.
* solib-svr4.c (svr4_special_symbol_handling): Remove the call to
svr4_relocate_main_executable.
(svr4_solib_create_inferior_hook): Make the call to
svr4_relocate_main_executable unconditional.
gdb/testsuite/
* gdb.base/attach-pie-misread.exp, gdb.base/attach-pie-misread.c: New.
* gdb.base/break-interp.exp (reach, test_core, test_ld): Require each
displacement message exactly once.
Jan Kratochvil [Mon, 5 Jul 2010 17:58:56 +0000 (17:58 +0000)]
gdb/
* auxv.c (ld_so_xfer_auxv): Do not error on failed read of data_address.
Jan Kratochvil [Mon, 5 Jul 2010 17:57:50 +0000 (17:57 +0000)]
gdb/
Fix attaching to PIEs prelinked on the disk after the process was
started.
* solib-svr4.c (svr4_exec_displacement): New variable arch_size.
Verify it against bfd_get_arch_size. Try to match arbitrary
displacement for the phdrs comparison.
gdb/testsuite/
* gdb.base/break-interp.exp: Run $binpie with new value "ATTACH", new
code for it. New variable relink_args.
(prelinkYES): Call prelinkNO.
(test_attach): Accept new parameter relink_args. Re-prelink the binary
in such case. Move the core code to ...
(test_attach_gdb): ... a new function. Send GDB command "file".
Extend expected "Attaching to " string.
H.J. Lu [Mon, 5 Jul 2010 17:14:22 +0000 (17:14 +0000)]
Replace rdrnd with rdrand.
gas/testsuite/
2010-07-05 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2010)
* gas/i386/rdrnd.s: Replace rdrnd with rdrand.
* gas/i386/rdrnd-intel.d: Likewise.
* gas/i386/rdrnd.d: Likewise.
* gas/i386/x86-64-rdrnd-intel.d: Likewise.
* gas/i386/x86-64-rdrnd.d: Likewise.
* gas/i386/x86-64-rdrnd.s: Likewise.
opcodes/
2010-07-05 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2010)
* i386-dis.c (mod_table): Replace rdrnd with rdrand.
* i386-opc.tbl: Likewise.
* i386-tbl.h: Regenerated.
H.J. Lu [Mon, 5 Jul 2010 16:40:32 +0000 (16:40 +0000)]
Fix a typo in comments for CpuFSGSBase.
2010-07-05 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.h (CpuFSGSBase): Fix a typo in comments.
H.J. Lu [Mon, 5 Jul 2010 15:07:20 +0000 (15:07 +0000)]
Don't generate .debug_line section if it isn't empty.
binutils/testsuite/
2010-07-05 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10531
PR gas/11789
* binutils-all/objdump.W: Remove bogus line debug info.
gas/
2010-07-05 Jim Wilson <wilson@codesourcery.com>
PR gas/10531
PR gas/11789
* dwarf2dbg.c (dwarf2_finish): Don't generate .debug_line section
if it isn't empty.
gas/testsuite/
2010-07-05 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10531
PR gas/11789
* gas/i386/dw2-compress-1.d: Remove bogus line debug info.
* gas/elf/dwarf2-1.d: New.
* gas/elf/dwarf2-1.s: Likewise.
* gas/elf/dwarf2-2.d: Likewise.
* gas/elf/dwarf2-2.s: Likewise.
* gas/elf/dwarf2-3.d: Likewise.
* gas/elf/dwarf2-3.s: Likewise.
* gas/i386/debug1.d: Likewise.
* gas/i386/debug1.s: Likewise.
* gas/elf/elf.exp: Run dwarf2-1, dwarf2-2 and dwarf2-3.
* gas/i386/i386.exp: Run debug1 for both 32bit and 64bit.
Alan Modra [Mon, 5 Jul 2010 13:34:27 +0000 (13:34 +0000)]
* elf32-ppc.c: Formatting.
(ppc_elf_finish_dynamic_sections): Don't make plt_entry var static.
Jan Beulich [Mon, 5 Jul 2010 07:59:12 +0000 (07:59 +0000)]
Remove bogus bugzilla references.
Alan Modra [Mon, 5 Jul 2010 05:56:11 +0000 (05:56 +0000)]
* config/tc-moxie.c (md_apply_fix): Delete set but otherwise
unused var.
gdbadmin [Mon, 5 Jul 2010 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 5 Jul 2010 00:00:05 +0000 (00:00 +0000)]
daily update
H.J. Lu [Sun, 4 Jul 2010 16:25:48 +0000 (16:25 +0000)]
Add dw2-compress-1 for Linux/x86.
2010-07-04 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/dw2-compress-1.d: New.
* gas/i386/dw2-compress-1.s: Likewise.
* gas/i386/i386.exp: Run dw2-compress-1 for Linux.
H.J. Lu [Sun, 4 Jul 2010 14:35:53 +0000 (14:35 +0000)]
Remove CONFIG_OBJS, GENERIC_OBJS and OBJS.
2010-07-04 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (CONFIG_OBJS): Removed.
(GENERIC_OBJS): Likewise.
(OBJS): Likewise.
* Makefile.in: Regenerated.
Alan Modra [Sun, 4 Jul 2010 10:08:58 +0000 (10:08 +0000)]
missed from commit
gdbadmin [Sun, 4 Jul 2010 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 4 Jul 2010 00:00:04 +0000 (00:00 +0000)]
daily update
H.J. Lu [Sat, 3 Jul 2010 22:15:58 +0000 (22:15 +0000)]
Don't call section_symbol() with expr_section.
gas/
2010-07-03 Jan Beulich <jbeulich@novell.com>
PR gas/11732
* config/tc-i386.c (i386_finalize_displacement): Don't call
section_symbol() with expr_section.
gas/testsuite/
2010-07-03 Jan Beulich <jbeulich@novell.com>
PR gas/11732
* gas/i386/i386.exp: Run new tests.
* gas/i386/intel-got{32,64}.{s,d}: New.
Cary Coutant [Sat, 3 Jul 2010 20:52:24 +0000 (20:52 +0000)]
bfd/ChangeLog:
* compress.c (bfd_uncompress_section_contents): Add ATTRIBUTE_UNUSED.
* dwarf2.c (read_and_uncompress_section): New function.
(read_section): Call it.
(find_line): Likewise.
binutils/ChangeLog:
* objdump.c (load_specific_debug_section): Decompress section contents
before applying relocations.
* readelf.c (load_specific_debug_section): Update section size after
decompression.
gas/ChangeLog:
* Makefile.am: Add compress-debug.c and compress-debug.h.
* Makefile.in: Regenerate.
* config.in: Add HAVE_ZLIB_H.
* configure.in: Check for zlib.h.
* configure: Regenerate.
* as.c (parse_args): Add --compress-debug-sections and
--nocompress-debug-sections.
* as.h (flag_compress_debug): New variable.
* compress-debug.c: New file.
* compress-debug.h: New file.
* write.c: Include compress-debug.h.
(compress_frag): New function.
(compress_debug): New function.
(write_object_file): Compress debug sections if requested.
Andreas Schwab [Sat, 3 Jul 2010 08:29:51 +0000 (08:29 +0000)]
Update.
Andreas Schwab [Sat, 3 Jul 2010 08:27:23 +0000 (08:27 +0000)]
gas/:
* config/tc-ppc.c (ppc_set_cpu): Cast PPC_OPCODE_xxx to ppc_cpu_t
before inverting.
binutils/:
* ppc-dis.c (powerpc_init_dialect): Cast PPC_OPCODE_xxx to
ppc_cpu_t before inverting.
Alan Modra [Sat, 3 Jul 2010 06:51:56 +0000 (06:51 +0000)]
include/opcode/
* ppc.h (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC): Delete.
Renumber other PPC_OPCODE defines.
gas/
* config/tc-ppc.c (ppc_set_cpu): Remove old opcode flags.
(ppc_setup_opcodes): Likewise. Simplify opcode selection.
opcodes/
* ppc-dis.c (ppc_opts, powerpc_init_dialect): Remove old opcode flags.
* ppc-opc.c (PPC32, POWER32, COM32, CLASSIC): Delete.
(PPC64, MFDEC2): Update.
(NON32, NO371): Define.
(powerpc_opcode): Update to not use old opcode flags, and avoid
-m601 duplicates.
DJ Delorie [Sat, 3 Jul 2010 04:09:56 +0000 (04:09 +0000)]
* m32c.cpu (f-dsp-8-s24): Mask high byte after shifting it.
* m32c-ibld.c: Regenerate.
Alan Modra [Sat, 3 Jul 2010 03:33:17 +0000 (03:33 +0000)]
* ppc-opc.c (PWR2COM): Define.
(PPCPWR2): Add PPC_OPCODE_COMMON.
(powerpc_opcodes): Add "subc", "subco", "subco.", "fcir", "fcir.",
"fcirz", "fcirz." to -mcom opcodes. Remove "mfsri", "dclst",
"rac" from -mcom.
Alan Modra [Sat, 3 Jul 2010 03:32:50 +0000 (03:32 +0000)]
* ppc.h (PPC_OPCODE_COMMON): Expand comment.
gdbadmin [Sat, 3 Jul 2010 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 3 Jul 2010 00:00:05 +0000 (00:00 +0000)]
daily update
Tom Tromey [Fri, 2 Jul 2010 21:22:30 +0000 (21:22 +0000)]
PR exp/11780:
* libunwind-frame.c (libunwind_frame_prev_register): Don't set
value as optimized-out.
DJ Delorie [Fri, 2 Jul 2010 20:40:28 +0000 (20:40 +0000)]
* config/tc-rx.h (md_do_align): New.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-rx.c (nops): New.
(rx_handle_align): Use various sized nops to align code.
DJ Delorie [Fri, 2 Jul 2010 20:24:23 +0000 (20:24 +0000)]
* config/tc-rx.c (rx_bytesT): Add grown/shrank counters for
relaxation.
(rx_relax_frag): Prevent infinite loops of grow/shrink/grow/etc.
Thiago Jung Bauermann [Fri, 2 Jul 2010 19:45:49 +0000 (19:45 +0000)]
2010-07-02 Ulrich Weigand <uweigand@de.ibm.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* breakpoint.c (can_use_hardware_watchpoint): Answer "what does this
represent?" question in comment. Change comment to a proper sentence.
Tom Tromey [Fri, 2 Jul 2010 19:11:55 +0000 (19:11 +0000)]
* gdb.base/bitops.exp: Remove extraneous "pass".
Tom Tromey [Fri, 2 Jul 2010 18:02:19 +0000 (18:02 +0000)]
2010-07-02 Ken Werner <ken.werner@de.ibm.com>
gdb
* c-valprint.c (c_val_print): Fix printing of character vectors.
gdb/testsuite
* gdb.arch/altivec-abi.exp: Fix expect pattern of character vectors.
Paolo Bonzini [Fri, 2 Jul 2010 12:15:53 +0000 (12:15 +0000)]
sync config/ChangeLog with gcc
Rainer Orth [Fri, 2 Jul 2010 11:58:19 +0000 (11:58 +0000)]
* gc++filt.m4: New file.
Jan Kratochvil [Fri, 2 Jul 2010 08:04:03 +0000 (08:04 +0000)]
gdb/
* spu-tdep.c (spu_catch_start): Adjust the caller of changed
create_breakpoint prototype.
gdbadmin [Fri, 2 Jul 2010 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 2 Jul 2010 00:00:05 +0000 (00:00 +0000)]
daily update
H.J. Lu [Thu, 1 Jul 2010 21:57:04 +0000 (21:57 +0000)]
Update ChangeLog entry.
H.J. Lu [Thu, 1 Jul 2010 21:55:02 +0000 (21:55 +0000)]
Support AVX Programming Reference (June, 2010)
gas/
2010-07-01 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2010)
* config/tc-i386.c (cpu_arch): Add .xsaveopt, .fsgsbase, .rdrnd
and .f16c.
* doc/c-i386.texi: Document xsaveopt, fsgsbase, rdrnd and f16c.
gas/testsuite/
2010-07-01 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2010)
* gas/i386/arch-10.s: Add xsaveopt.
* gas/i386/x86-64-arch-2.s: Likwise.
* gas/i386/arch-10.d: Updated.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/f16c-intel.d: New.
* gas/i386/f16c.d: Likewise.
* gas/i386/f16c.s: Likewise.
* gas/i386/fsgs-intel.d: Likewise.
* gas/i386/fsgs.d: Likewise.
* gas/i386/fsgs.s: Likewise.
* gas/i386/rdrnd-intel.d: Likewise.
* gas/i386/rdrnd.d: Likewise.
* gas/i386/rdrnd.s: Likewise.
* gas/i386/x86-64-f16c-intel.d: Likewise.
* gas/i386/x86-64-f16c.d: Likewise.
* gas/i386/x86-64-f16c.s: Likewise.
* gas/i386/x86-64-fsgs-intel.d: Likewise.
* gas/i386/x86-64-fsgs.d: Likewise.
* gas/i386/x86-64-fsgs.s: Likewise.
* gas/i386/x86-64-rdrnd-intel.d: Likewise.
* gas/i386/x86-64-rdrnd.d: Likewise.
* gas/i386/x86-64-rdrnd.s: Likewise.
* gas/i386/i386.exp: Run f16c, f16c-intel, fsgs, fsgs-intel,
rdrnd, rdrnd-intel, x86-64-f16c, x86-64-f16c-intel, x86-64-fsgs,
x86-64-fsgs-intel, x86-64-rdrnd, x86-64-rdrnd-intel.
* gas/i386/x86-64-xsave.s: Add tests for xsaveopt64.
* gas/i386/x86-64-xsave-intel.d: Updated.
* gas/i386/x86-64-xsave.d: Likewise.
opcodes/
2010-07-01 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2010)
* i386-dis.c (PREFIX_0FAE_REG_0): New.
(PREFIX_0FAE_REG_1): Likewise.
(PREFIX_0FAE_REG_2): Likewise.
(PREFIX_0FAE_REG_3): Likewise.
(PREFIX_VEX_3813): Likewise.
(PREFIX_VEX_3A1D): Likewise.
(prefix_table): Add PREFIX_0FAE_REG_0, PREFIX_0FAE_REG_1,
PREFIX_0FAE_REG_2, PREFIX_0FAE_REG_3, PREFIX_VEX_3813 and
PREFIX_VEX_3A1D.
(vex_table): Add PREFIX_VEX_3813 and PREFIX_VEX_3A1D.
(mod_table): Add PREFIX_0FAE_REG_0, PREFIX_0FAE_REG_1,
PREFIX_0FAE_REG_2, PREFIX_0FAE_REG_3 xsaveopt and rdrnd.
* i386-gen.c (cpu_flag_init): Add CPU_XSAVEOPT_FLAGS,
CPU_FSGSBASE_FLAGS, CPU_RDRND_FLAGS and CPU_F16C_FLAGS.
(cpu_flags): Add CpuXsaveopt, CpuFSGSBase, CpuRdRnd and CpuF16C.
* i386-opc.h (CpuXsaveopt): New.
(CpuFSGSBase):Likewise.
(CpuRdRnd): Likewise.
(CpuF16C): Likewise.
(i386_cpu_flags): Add cpuxsaveopt, cpufsgsbase, cpurdrnd and
cpuf16c.
* i386-opc.tbl: Add xsaveopt, rdfsbase, rdgsbase, rdrnd,
wrfsbase, wrgsbase, vcvtph2ps and vcvtps2ph.
Pedro Alves [Thu, 1 Jul 2010 18:03:48 +0000 (18:03 +0000)]
gdb/
* breakpoint.c (BREAK_ARGS_HELP, _initialize_breakpoint): Clarify
usefulness suggestion of multiple breakpoints at same location.
gdb/testsuite/
* gdb.base/help.exp: Adjust expected output.
Pedro Alves [Thu, 1 Jul 2010 17:42:41 +0000 (17:42 +0000)]
gdb/
* breakpoint.c (BREAK_ARGS_HELP): Add missing `the'.
gdb/testsuite/
* gdb.base/help: Adjust expected output.
Pedro Alves [Thu, 1 Jul 2010 17:40:04 +0000 (17:40 +0000)]
* gdb.texinfo (Create and Delete Tracepoints): Add more index
entries for fast tracepoints and static tracepoints.
Pedro Alves [Thu, 1 Jul 2010 17:22:52 +0000 (17:22 +0000)]
* gdb.texinfo (General Query Packets) <qfThreadInfo,
qsThreadInfo>: Spell out `l' as ell.
Pedro Alves [Thu, 1 Jul 2010 15:45:31 +0000 (15:45 +0000)]
* dwarf2loc.c (locexpr_tracepoint_var_ref)
(loclist_tracepoint_var_ref): Handle optimized out values.
Pedro Alves [Thu, 1 Jul 2010 15:36:18 +0000 (15:36 +0000)]
* breakpoint.c (update_watchpoint, _initialize_breakpoint): Remove
unnecessary space in string.
* filesystem.c (_initialize_filesystem): Ditto.
* frame.c (_initialize_frame): Ditto.
* infcmd.c (step_once): Ditto.
* infrun.c (_initialize_infrun): Ditto.
* linux-nat.c (linux_child_follow_fork): Ditto.
* maint.c (maintenance_deprecate): Ditto.
* memattr.c (_initialize_mem): Ditto.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
* monitor.c (monitor_open): Ditto.
* procfs.c (procfs_xfer_memory): Ditto.
* reverse.c (bookmarks_info): Ditto.
* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Ditto.
* stack.c (_initialize_stack): Ditto.
* tracepoint.c (_initialize_tracepoint): Ditto.
* xtensa-tdep.c (xtensa_supply_gregset,
xtensa_regset_from_core_section): Ditto.
Tom Tromey [Thu, 1 Jul 2010 15:21:11 +0000 (15:21 +0000)]
* value.h (struct lval_funcs) <check_any_valid>: Rename from
check_all_valid.
* value.c (value_entirely_optimized_out): Invert result. Update
for new function name.
Alan Modra [Thu, 1 Jul 2010 13:15:47 +0000 (13:15 +0000)]
* lib/ld-lib.exp (default_ld_simple_link): Add $gcc_ld_flag before
any other options in $ld.
Pedro Alves [Thu, 1 Jul 2010 10:36:12 +0000 (10:36 +0000)]
Static tracepoints support, and UST integration.
gdb/gdbserver/
* configure.ac: Handle --with-ust. substitute ustlibs and ustinc.
* mem-break.c (uninsert_all_breakpoints)
(reinsert_all_breakpoints): New.
* mem-break.h (reinsert_all_breakpoints, uninsert_all_breakpoints):
* tracepoint.c (ust_loaded, helper_thread_id, cmd_buf): New.
(gdb_agent_ust_loaded, helper_thread_id)
(gdb_agent_helper_thread_id): New macros.
(struct ipa_sym_addresses): Add addr_ust_loaded,
addr_helper_thread_id, addr_cmd_buf.
(symbol_list): Add ust_loaded, helper_thread_id, cmd_buf.
(in_process_agent_loaded_ust): New.
(write_e_ust_not_loaded): New.
(maybe_write_ipa_ust_not_loaded): New.
(struct collect_static_trace_data_action): New.
(enum tracepoint_type) <static_tracepoint>: New.
(struct tracepoint) <handle>: Mention static tracepoints.
(struct static_tracepoint_ctx): New.
(CMD_BUF_SIZE): New.
(add_tracepoint_action): Handle static tracepoint actions.
(unprobe_marker_at): New.
(clear_installed_tracepoints): Handle static tracepoints.
(cmd_qtdp): Handle static tracepoints.
(probe_marker_at): New.
(cmd_qtstart): Handle static tracepoints.
(response_tracepoint): Handle static tracepoints.
(cmd_qtfstm, cmd_qtsstm, cmd_qtstmat): New.
(handle_tracepoint_query): Handle qTfSTM, qTsSTM and qTSTMat.
(get_context_regcache): Handle static tracepoints.
(do_action_at_tracepoint): Handle static tracepoint actions.
(traceframe_find_block_type): Handle static trace data blocks.
(traceframe_read_sdata): New.
(download_tracepoints): Download static tracepoint actions.
[HAVE_UST] Include ust/ust.h, dlfcn.h, sys/socket.h, and sys/un.h.
(GDB_PROBE_NAME): New.
(ust_ops): New.
(GET_UST_SYM): New.
(USTF): New.
(dlsym_ust): New.
(ust_marker_to_static_tracepoint): New.
(gdb_probe): New.
(collect_ust_data_at_tracepoint): New.
(gdb_ust_probe): New.
(UNIX_PATH_MAX, SOCK_DIR): New.
(gdb_ust_connect_sync_socket): New.
(resume_thread, stop_thread): New.
(run_inferior_command): New.
(init_named_socket): New.
(gdb_ust_socket_init): New.
(cstr_to_hexstr): New.
(next_st): New.
(first_marker, next_marker): New.
(response_ust_marker): New.
(cmd_qtfstm, cmd_qtsstm): New.
(unprobe_marker_at, probe_marker_at): New.
(cmd_qtstmat, gdb_ust_thread): New.
(gdb_ust_init): New.
(initialize_tracepoint_ftlib): Call gdb_ust_init.
* linux-amd64-ipa.c [HAVE_UST]: Include ust/processor.h
(ST_REGENTRY): New.
(x86_64_st_collect_regmap): New.
(X86_64_NUM_ST_COLLECT_GREGS): New.
(AMD64_RIP_REGNUM): New.
(supply_static_tracepoint_registers): New.
* linux-i386-ipa.c [HAVE_UST]: Include ust/processor.h
(ST_REGENTRY): New.
(i386_st_collect_regmap): New.
(i386_NUM_ST_COLLECT_GREGS): New.
(supply_static_tracepoint_registers): New.
* server.c (handle_query): Handle qXfer:statictrace:read.
<qSupported>: Report support for StaticTracepoints, and
qXfer:statictrace:read features.
* server.h (traceframe_read_sdata)
(supply_static_tracepoint_registers): Declare.
* remote-utils.c (convert_int_to_ascii, hexchars, ishex, tohex)
(unpack_varlen_hex): Include in IPA build.
* Makefile.in (ustlibs, ustinc): New.
(IPA_OBJS): Add remote-utils-ipa.o.
($(IPA_LIB)): Link -ldl and -lpthread.
(UST_CFLAGS): New.
(IPAGENT_CFLAGS): Add UST_CFLAGS.
* config.in, configure: Regenerate.
gdb/
* NEWS: Mention new support for static tracepoints.
(New packets): Mention qTfSTM, qTsSTM, qTSTMat and
qXfer:statictrace:read.
(New features in the GDB remote stub, GDBserver): Mention static
tracepoints support using an UST based backend.
(New commands): Mention "info static-tracepoint-markers" and
"strace".
* breakpoint.c (is_marker_spec): New.
(is_tracepoint): Handle static tracepoints.
(validate_commands_for_breakpoint): Static tracepoints can't do
while-stepping.
(static_tracepoints_here): New.
(bpstat_what): Handle static tracepoints.
(print_one_breakpoint_location, allocate_bp_location, mention):
Ditto.
(create_breakpoint_sal): Ditto.
(decode_static_tracepoint_spec): New.
(create_breakpoint): Replace `hardwareflag', and `traceflag' with
`type_wanted'. Adjust. Handle static tracepoint marker
locations.
(break_command_1): Adjust.
(update_static_tracepoint): New.
(update_breakpoint_locations): Handle static tracepoints.
(breakpoint_re_set_one): Handle static tracepoint marker
locations.
(disable_command, enable_command): Handle static tracepoints.
(trace_command, ftrace_command): Adjust.
(strace_command): New.
(create_tracepoint_from_upload): Adjust.
(save_breakpoints): Handle static tracepoints.
(_initialize_breakpoint): Install the "strace" command.
* breakpoint.h (enum bptype): New bp_static_tracepoint type.
(struct breakpoint): New fields static_trace_marker_id and
static_trace_marker_id_idx.
(breakpoints_here_p): Declare.
(create_breakpoint): Adjust.
(static_tracepoints_here): Declare.
* remote.c (struct remote_state) <static_tracepoints>: New field.
(PACKET_qXfer_statictrace_read, PACKET_StaticTracepoints): New.
(remote_static_tracepoint_marker_at): New.
(remote_static_tracepoint_markers_by_strid): New.
(remote_static_tracepoint_feature): New.
(remote_disconnected_tracing_feature): Handle "StaticTracepoints".
(remote_xfer_partial): Handle TARGET_OBJECT_STATIC_TRACE_DATA.
(remote_supports_static_tracepoints): New.
(remote_download_tracepoint): Download static tracepoints.
(init_remote_ops): Install remote_static_tracepoint_marker_at and
remote_static_tracepoint_markers_by_strid.
(_initialize_remote): Install set|show remote static-tracepoints,
and set|show remote read-sdata-object commands.
* target.c (update_current_target): Inherit and default
to_static_tracepoint_marker_at, and
to_static_tracepoint_markers_by_strid.
* target.h (static_tracepoint_marker): Forward declare.
(enum target_object): New object TARGET_OBJECT_STATIC_TRACE_DATA.
(static_tracepoint_marker_p): New typedef.
(DEF_VEC_P(static_tracepoint_marker_p)): New VEC type.
(struct target_ops): New fields to_static_tracepoint_marker_at and
to_static_tracepoint_markers_by_strid.
(target_static_tracepoint_marker_at)
(target_static_tracepoint_markers_by_strid): New.
* tracepoint.c: Include source.h.
(validate_actionline): Handle $_sdata.
(struct collection_list): New field strace_data.
(add_static_trace_data): New.
(clear_collection_list): Clear strace_data.
(stringify_collection_list): Account for a possible static trace
data collection.
(encode_actions_1): Encode an $_sdata collection.
(parse_tracepoint_definition): Handle static tracepoints.
(parse_static_tracepoint_marker_definition): New.
(release_static_tracepoint_marker): New.
(print_one_static_tracepoint_marker): New.
(info_static_tracepoint_markers_command): New.
(sdata_make_value): New.
(_initialize_tracepoint): Create the $_sdata convenience variable.
Add the "info static-tracepoint-markers" command.
Mention $_sdata in the "collect" command's help output.
* tracepoint.h (struct static_tracepoint_marker): New.
(parse_static_tracepoint_marker_definition)
(release_static_tracepoint_marker): Declare.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust.
* python/py-breakpoint.c (bppy_new): Adjust.
doc/
* gdb.texinfo (Convenience Variables): Document $_sdata.
(Commands to Set Tracepoints): Describe static tracepoints. Add
`Listing Static Tracepoint Markers' menu entry. Document
"strace".
(Tracepoint Action Lists): Document collecting $_sdata.
(Listing Static Tracepoint Markers): New subsection.
(Tracepoints support in gdbserver): Mention static tracepoints.
(remote packets, enabling and disabling): Mention
read-sdata-object.
(General Query Packets) <qSupported>: Document qXfer:sdata:read
and StaticTracepoint.
Mention qTfSTM, qTsSTM and qTSTMat as tracepoint packets.
Document qXfer:sdata:read.
(Tracepoint packets): Document qTfSTM, qTsSTM and qTSTMat.
Matthew Gretton-Dann [Thu, 1 Jul 2010 10:02:46 +0000 (10:02 +0000)]
* gas/config/tc-arm.c (do_t_mov_cmp): Fix reporting of unpredictable and
deprecated mov register instructions.
* gas/testsuite/gas/arm/thumb2_bad_reg.s: Update mov register tests.
* gas/testsuite/gas/arm/thumb2_bad_reg.l: Likewise.
Alan Modra [Thu, 1 Jul 2010 09:48:26 +0000 (09:48 +0000)]
* elf64-ppc.c (ppc64_elf_edit_toc): Use SYMBOL_CALLS_LOCAL rather
than SYMBOL_REFERENCES_LOCAL.
(ppc64_elf_relocate_section): Likewise.
Alan Modra [Thu, 1 Jul 2010 04:50:21 +0000 (04:50 +0000)]
* config/tc-ppc.c (toc_reloc_types): New variable.
(md_assemble): Set it.
(ppc_frob_file_before_adjust): Don't warn about toc section size
if we have large toc relocs and no small toc relocs.
Alan Modra [Thu, 1 Jul 2010 04:12:29 +0000 (04:12 +0000)]
* elf64-ppc.c (ppc64_elf_edit_toc): Keep toc entries for ifuncs.
Alan Modra [Thu, 1 Jul 2010 02:29:12 +0000 (02:29 +0000)]
* ppc-opc.c (powerpc_opcodes): Revert deprecation of mfocrf, mtcrf
and mtocrf on EFS.
gdbadmin [Thu, 1 Jul 2010 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 1 Jul 2010 00:00:05 +0000 (00:00 +0000)]
daily update
Joel Brobecker [Wed, 30 Jun 2010 23:12:04 +0000 (23:12 +0000)]
Fix build failure with Python installed in non-system location.
The debugger fails to build when configure with --python-python=<path>
where <path> is a non-system location. The reason is a warning made
fatal due to the definition of _XOPEN_SOURCE inside pyconfig.h. This
is exactly the same problem as with _POSIX_C_SOURCE, handled in
python-internal.h as follow:
| /* /usr/include/features.h on linux systems will define _POSIX_C_SOURCE
| if it sees _GNU_SOURCE (which config.h will define).
| pyconfig.h defines _POSIX_C_SOURCE to a different value than
| /usr/include/features.h does causing compilation to fail.
| To work around this, undef _POSIX_C_SOURCE before we include Python.h. */
| #undef _POSIX_C_SOURCE
This patch fixes this problem the same way.
2010-06-30 Joel Brobecker <brobecker@adacore.com>
* python/python-internal.h (_XOPEN_SOURCE): Undefine before
including Python.h.
Jan Kratochvil [Wed, 30 Jun 2010 15:58:47 +0000 (15:58 +0000)]
gdb/testsuite/
* gdb.cp/namespace.exp (print C::OtherFileClass::cOtherFileClassVar)
(print ::C::OtherFileClass::cOtherFileClassVar): Remove KFAIL for
c++/11702.
Doug Kwan [Wed, 30 Jun 2010 06:41:09 +0000 (06:41 +0000)]
2010-06-29 Doug Kwan <dougkwan@google.com>
* arm-reloc-property.cc (Arm_reloc_property::Arm_reloc_property):
Initialize USE_SYMBOL_.
* arm-reloc-property.h (Arm_reloc_property::uses_symbol): New method
definition.
(Arm_reloc_property::uses_symbol_): New data member declaration.
* arm.cc (Target_arm::Relocate::relocate): Exit early if relocation
uses symbol value and symbol is undefined but not weakly undefined.
Doug Evans [Wed, 30 Jun 2010 05:39:23 +0000 (05:39 +0000)]
PR gdb/11702
* dwarf2read.c (dwarf2_add_field): Only create a symbol if
DW_AT_external is present.
Alan Modra [Wed, 30 Jun 2010 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 30 Jun 2010 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Jan Kratochvil [Tue, 29 Jun 2010 21:48:10 +0000 (21:48 +0000)]
gdb/testsuite/
* gdb.base/break-interp.exp (prelinkYES): XFAIL on `Not enough room to
add .dynamic entry'.
Doug Evans [Tue, 29 Jun 2010 16:53:10 +0000 (16:53 +0000)]
PR c++/11702
* NEWS: Add entry.
* dwarf2read.c (dwarf2_add_field): If DW_AT_const_value is present,
create a symbol for the field and record the value.
(new_symbol): Handle DW_TAG_member.
* gdbtypes.c (field_is_static): Remove FIXME.
* symtab.c (search_symbols): When searching for VARIABLES_DOMAIN,
only ignore LOC_CONST symbols that are enums.
testsuite/
Test PR c++/11702.
* gdb.cp/m-static.exp: Add testcase.
* gdb.cp/m-static.h (gnu_obj_4): Add initialized static const member.
Doug Evans [Tue, 29 Jun 2010 16:35:28 +0000 (16:35 +0000)]
* dwarf2read.c: Remove trailing whitespace.
Doug Evans [Tue, 29 Jun 2010 16:17:58 +0000 (16:17 +0000)]
Delete FIELD_LOC_KIND_DWARF_BLOCK, unused.
* gdbtypes.h (enum field_loc_kind): Delete FIELD_LOC_KIND_DWARF_BLOCK.
(struct main_type, field loc): Delete dwarf_block.
(FIELD_DWARF_BLOCK): Delete.
(SET_FIELD_DWARF_BLOCK): Delete.
(TYPE_FIELD_DWARF_BLOCK): Delete.
* gdb-gdb.py (StructMainTypePrettyPrinter.struct_field_location_img):
Update.
Nick Clifton [Tue, 29 Jun 2010 09:43:04 +0000 (09:43 +0000)]
* scripttempl/xstormy16.sc (.gcc_except_table): Include sections
with the .gcc_except_table. prefix.
Alan Modra [Tue, 29 Jun 2010 08:47:40 +0000 (08:47 +0000)]
PR binutils/3166
* objcopy.c (is_strip_section): Revert 2006-09-05.
(setup_section): Make SHT_GROUP section nobits.
Hui Zhu [Tue, 29 Jun 2010 05:52:17 +0000 (05:52 +0000)]
2010-06-29 Hui Zhu <teawater@gmail.com>
* record.c (set_record_pic_cmdlist,
show_record_pic_cmdlist): New variables.
(set_record_pic_command,
show_record_pic_command): New functions.
(record_pic_function, record_pic_line, record_pic_enum,
set_record_pic_type, record_pic_hide_nofunction,
record_pic_hide_nosource, record_pic_hide_same): New variables.
(record_pic_fputs): New function.
(function_list, node_list, edge_list): New struct.
(function_list, node_list, edge_list): New variables.
(record_pic_cleanups, record_pic_node,
record_pic_edge, cmd_record_pic): New functions.
(_initialize_record): Add new commands for record pic.
Joel Brobecker [Tue, 29 Jun 2010 04:32:35 +0000 (04:32 +0000)]
Fix unmatched @end table in gdb.texinfo.
2010-06-29 Joel Brobecker <brobecker@adacore.com>
* gdb.texinfo (Threads In Python): Fix unmatched @end table.
Alan Modra [Tue, 29 Jun 2010 04:32:29 +0000 (04:32 +0000)]
remove maxq-coff port
Alan Modra [Tue, 29 Jun 2010 04:17:34 +0000 (04:17 +0000)]
remove maxq-coff port
gdbadmin [Tue, 29 Jun 2010 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 29 Jun 2010 00:00:04 +0000 (00:00 +0000)]
daily update
Jan Kratochvil [Mon, 28 Jun 2010 22:03:31 +0000 (22:03 +0000)]
gdb/
* dwarf2read.c (read_structure_type) <fi.typedef_field_list>: Call
ALLOCATE_CPLUS_STRUCT_TYPE.
Phil Muldoon [Mon, 28 Jun 2010 21:16:04 +0000 (21:16 +0000)]
2010-06-28 Phil Muldoon <pmuldoon@redhat.com>
Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* value.c (pack_unsigned_long): New function.
(value_from_ulongest): New function.
* value.h (value_from_ulongest): Declare.
* python/python.c (_initialize_python): Call
gdbpy_initialize_thread and gdbpy_initialize_inferior.
* python/python-internal.h: Define thread_object.
(gdbpy_inferiors, gdbpy_selected_thread)
(frame_info_to_frame_object, create_thread_object)
(find_thread_object, find_inferior_object)
(gdbpy_initialize_thread, gdbpy_initialize_inferiors)
(gdbpy_is_value_object, get_addr_from_python): Declare.
* python/py-value.c (builtin_type_upylong): Define.
(convert_value_from_python): Add logic for ulongest.
(gdbpy_is_value_object): New function.
* python/py-utils.c (get_addr_from_python): New function.
* python/py-frame.c (frame_info_to_frame_object): Return a PyObject.
(gdbpy_selected_frame): Use PyObject over frame_info.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-inferior and
py-infthread.
(SUBDIR_PYTHON_SRCS): Likewise.
(py-inferior.o): New Rule.
(py-infthread.o): New Rule.
* python/py-inferior.c: New File.
* python/py-infthread.c: New File.
2010-06-28 Phil Muldoon <pmuldoon@redhat.com>
Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.texinfo (Inferiors In Python): New node.
* gdb.texinfo (Threads In Python): New node.
2010-06-28 Phil Muldoon <pmuldoon@redhat.com>
Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.python/py-inferior.c: New File.
* gdb.python/py-infthread.c: New File.
* gdb.python/py-inferior.exp: New File.
* gdb.python/py-infthread.exp: New File.
Rafael Ávila de Espíndola [Mon, 28 Jun 2010 21:03:49 +0000 (21:03 +0000)]
2010-06-28 Rafael Espindola <espindola@google.com>
* plugin.cc (Plugin::load): Use dlerror.
Jan Kratochvil [Mon, 28 Jun 2010 20:39:30 +0000 (20:39 +0000)]
gdb/
* c-typeprint.c (c_type_print_base): For no fields check include also
TYPE_TYPEDEF_FIELD_COUNT. Print new typedefs section.
* dwarf2read.c (struct typedef_field_list)
(struct field_info) <typedef_field_list, typedef_field_list_count>: New.
(dwarf2_add_typedef): New.
(read_structure_type): Call dwarf2_add_typedef for DW_TAG_typedef.
Copy also FI.TYPEDEF_FIELD_LIST.
* gdbtypes.h (struct typedef_field)
(struct cplus_struct_type) <typedef_field, typedef_field_count>
(TYPE_TYPEDEF_FIELD_ARRAY, TYPE_TYPEDEF_FIELD, TYPE_TYPEDEF_FIELD_NAME)
(TYPE_TYPEDEF_FIELD_TYPE, TYPE_TYPEDEF_FIELD_COUNT): New.
gdb/testsuite/
* gdb.cp/namespace.exp (ptype OtherFileClass typedefs)
(ptype ::C::OtherFileClass typedefs): New.
* gdb.cp/namespace1.cc (C::OtherFileClass::cOtherFileClassType2)
(C::OtherFileClass::cOtherFileClassVar2): New.
(C::OtherFileClass::cOtherFileClassVar_use): Use also
cOtherFileClassVar2.
(C::cOtherFileType2, C::cOtherFileVar2): New.
(C::cOtherFileVar_use): use also cOtherFileVar2.
* gdb.cp/userdef.exp (ptype &*c): Permit arbitrary trailing text.
Jan Kratochvil [Mon, 28 Jun 2010 20:35:52 +0000 (20:35 +0000)]
gdb/
* cp-namespace.c (cp_lookup_nested_type): New variable
concatenated_name. Turn the current return condition into a reverse
one. Call also lookup_static_symbol_aux on the constructed qualified
name.
* symtab.c (lookup_symbol_aux): Move variable objfile and searching in
other files into a called ...
(lookup_static_symbol_aux): ... new function here.
* symtab.h (lookup_static_symbol_aux): New prototype.
* valops.c (value_maybe_namespace_elt): Call also
lookup_static_symbol_aux if we failed otherwise.
gdb/testsuite/
* gdb.cp/namespace.exp (whatis C::cOtherFileType)
(whatis ::C::cOtherFileType, whatis C::cOtherFileVar)
(whatis ::C::cOtherFileVar, print C::cOtherFileVar)
(print ::C::cOtherFileVar)
(whatis C::OtherFileClass::cOtherFileClassType)
(whatis ::C::OtherFileClass::cOtherFileClassType)
(print C::OtherFileClass::cOtherFileClassVar)
(print ::cOtherFileClassVar)
(print ::C::OtherFileClass::cOtherFileClassVar): New tests.
(ptype OtherFileClass, ptype ::C::OtherFileClass): Permit arbitrary
trailing content.
* gdb.cp/namespace1.cc (C::OtherFileClass::cOtherFileClassType)
(C::OtherFileClass::cOtherFileClassVar)
(C::OtherFileClass::cOtherFileClassVar_use, C::cOtherFileType)
(C::cOtherFileVar, C::cOtherFileVar_use): New.
Jan Kratochvil [Mon, 28 Jun 2010 20:18:27 +0000 (20:18 +0000)]
gdb/
Fix PR c++/11703 and PR gdb/1448.
* c-exp.y (yylex) <last_was_coloncolon && first_was_coloncolon>: Add
FIRST_ITER check.
gdb/testsuite/
Test PR c++/11703 and PR gdb/1448.
* gdb.cp/namespace.exp (ptype ::C::NestedClass): Remove KFAIL for
gdb/1448.
Jan Kratochvil [Mon, 28 Jun 2010 20:12:53 +0000 (20:12 +0000)]
gdb/
Fix modification of cplus_struct_default.
* dwarf2read.c (dwarf2_add_member_fn) <no DW_AT_vtable_elem_location>:
Call ALLOCATE_CPLUS_STRUCT_TYPE.
* gdbtypes.c (cplus_struct_default): New empty initializer, comment it.
gdb/testsuite/
* gdb.cp/virtbase.cc (class RTTI_base, class RTTI_data)
(main) <rtti_data>: New.
* gdb.cp/virtbase.exp (print rtti_data): New.
Jan Kratochvil [Mon, 28 Jun 2010 20:09:59 +0000 (20:09 +0000)]
gdb/testsuite/
* lib/gdb.exp (gdb_test_multiple): Error on trailing newlines.
Joel Brobecker [Mon, 28 Jun 2010 19:54:04 +0000 (19:54 +0000)]
Document the GDB python directory.
2010-06-27 Joel Brobecker <brobecker@adacore.com>
* NEWS: Add entry announcing the python directory.
2010-06-27 Joel Brobecker <brobecker@adacore.com>
* gdb.texinfo (Python): Document what the python directory is
and what its location is.
(Basic Python): Document the gdb.PYTHONDIR constant.
This page took 0.045253 seconds and 4 git commands to generate.