Chung-Lin Tang [Mon, 19 Dec 2011 07:31:07 +0000 (07:31 +0000)]
2011-12-19 Chung-Lin Tang <cltang@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Sandra Loosemore <sandra@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* elfxx-mips.c (mips_elf_local_pic_function_p): Return true when
H is a MIPS16 function with a kept 32-bit stub. Update comments.
(mips_elf_get_la25_target): New function.
(mips_elf_add_la25_intro): Change to use mips_elf_get_la25_target().
(mips_elf_add_la25_stub): Move compute of use_trampoline_p down,
change to use mips_elf_get_la25_target().
(mips_elf_relocation_needs_la25_stub): Add target_is_16_bit_code_p
parameter, add switch case for R_MIPS16_26.
(mips_elf_calculate_relocation): Redirect relocation to point to the
LA25 stub if it exists, instead of the MIPS16 stub. Update arguments
of call to mips_elf_relocation_needs_la25_stub(), don't use la25 stub
for mips16->mips16 calls.
(_bfd_mips_elf_check_relocs): Update arguments of call to
mips_elf_relocation_needs_la25_stub().
(mips_elf_create_la25_stub): Change to use mips_elf_get_la25_target().
Joel Brobecker [Mon, 19 Dec 2011 04:36:29 +0000 (04:36 +0000)]
try ignoring bad PLT entries in ELF symbol tables
Comment says it all:
/* On ia64-hpux, we have discovered that the system linker
adds undefined symbols with nonzero addresses that cannot
be right (their address points inside the code of another
function in the .text section). This creates problems
when trying to determine which symbol corresponds to
a given address.
We try to detect those buggy symbols by checking which
section we think they correspond to. Normally, PLT symbols
are stored inside their own section, and the typical name
for that section is ".plt". So, if there is a ".plt"
section, and yet the section name of our symbol does not
start with ".plt", we ignore that symbol. */
gdb/ChangeLog:
* elfread.c (elf_symtab_read): Ignore undefined symbols with
nonzero addresses if they do not correspond to a .plt section
when one is available in the objfile.
Joel Brobecker [Mon, 19 Dec 2011 04:33:39 +0000 (04:33 +0000)]
Work around Solaris bourne shell limitation when building the sim
Building the sim on a sparc-solaris 2.8 machine fails when configured
with no extra sim hardware:
> for hw in ; do \
> echo "extern const struct hw_descriptor
> dv_${hw}_descriptor[];" ; \
> done >> tmp-hw.h
> echo 'const char version[] = "'"`sed q
> /[...]/../../gdb/version.in`"'";'
> >> version.c-tmp
> /bin/sh: -c: line 1: syntax error near unexpected token `;'
> /bin/sh: -c: line 1: `for hw in ; do \'
> make[3]: *** [hw-config.h] Error 2
The same thing happens with the version of bash that we got from
Sun as well (which is very old: 2.03.0(1)-release).
The problems comes from the fact that both shells are buggy, and
reject the following script:
for hw in ; do
[...]
done
The above is what sim/common/Makefile.in tries to execute when
generating hw-config.h.
In order to allow users to build out of the box on these machines,
this patch works around this bug. It does rely on the fact that
none of the tokens in SIM_HW contain whitespaces.
sim/common/ChangeLog:
* Make-common.in (hw-config.h): Work around bug in Solaris 2.8
system bourne shell.
gdbadmin [Mon, 19 Dec 2011 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Jan Kratochvil [Sun, 18 Dec 2011 20:55:08 +0000 (20:55 +0000)]
gdb/gdbserver/
* linux-low.c (linux_create_inferior): Put empty if clause for write.
Revert:
2011-12-18 Hui Zhu <teawater@gmail.com>
* linux-low.c (linux_create_inferior): Save return value to ret.
Hui Zhu [Sun, 18 Dec 2011 15:49:04 +0000 (15:49 +0000)]
2011-12-18 Hui Zhu <teawater@gmail.com>
* linux-low.c (linux_create_inferior): Save return value to ret.
Eric Botcazou [Sun, 18 Dec 2011 10:20:52 +0000 (10:20 +0000)]
* configure: Regenerate.
config/
* acx.m4 (Test for GNAT): Update comment and add quotes in final test.
gdbadmin [Sun, 18 Dec 2011 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Cary Coutant [Sat, 17 Dec 2011 22:39:52 +0000 (22:39 +0000)]
2011-12-17 Cary Coutant <ccoutant@google.com>
* dwarf_reader.cc (Sized_dwarf_line_info::read_lines): Add casts.
* resolve.cc (Symbol_table::resolve): Likewise.
* i386.cc (Target_i386::do_code_fill): Use char constants for nop
arrays.
* x86_64.cc (Target_x86_64::do_code_fill): Likewise.
Andreas Schwab [Sat, 17 Dec 2011 20:10:57 +0000 (20:10 +0000)]
* cp-name-parser.y (cp_merge_demangle_parse_infos): Don't use
obstack_empty_p.
Mark Kettenis [Sat, 17 Dec 2011 15:45:56 +0000 (15:45 +0000)]
* amd64obsd-tdep.c (amd64obsd_init_abi): Don't set
regset_from_core_section.
(amd64obsd_core_init_abi): New function that sets
regset_from_core_section.
(_initialize_amd64obsd_tdep): Use amd64obsd_core_init_abi for
traditional core dumps.
Mark Kettenis [Sat, 17 Dec 2011 13:54:51 +0000 (13:54 +0000)]
* gdb.arch/amd64-i386-address.exp: Skip on *-*-openbsd*.
Mark Kettenis [Sat, 17 Dec 2011 12:22:06 +0000 (12:22 +0000)]
* amd64obsd-tdep.c (amd64obsd_sigtramp_p): Detect new signal
trampoline to be introduced in OpenBSD 5.0.
Jan Kratochvil [Sat, 17 Dec 2011 09:43:53 +0000 (09:43 +0000)]
gdb/
Fix build regression from the PR threads/10729 fix.
* s390-nat.c (s390_insert_watchpoint, s390_remove_watchpoint): Use LP,
not LP->PTID.
Andrey Smirnov [Sat, 17 Dec 2011 06:14:45 +0000 (06:14 +0000)]
* mi/mi-main.c (mi_cmd_list_thread_groups): Rename `optind' and
`optarg' to `oind' and `oarg', respectively(-Wshadow).
(mi_cmd_data_read_memory): Ditto.
(mi_cmd_data_read_memory_bytes): Ditto.
Andrey Smirnov [Sat, 17 Dec 2011 06:09:54 +0000 (06:09 +0000)]
* mi/mi-getopt.c (mi_getopt): Rename `optind' and `optarg' to
`oind' and `oarg', respectively(-Wshadow).
(mi_valid_noargs): Ditto.
Andrey Smirnov [Sat, 17 Dec 2011 06:06:49 +0000 (06:06 +0000)]
* mi/mi-cmd-var.c (print_varobj): Rename `optind' and `optarg' to
`oind' and `oarg', respectively(-Wshadow).
Andrey Smirnov [Sat, 17 Dec 2011 06:03:21 +0000 (06:03 +0000)]
* mi/mi-cmd-target.c (mi_cmd_target_file_get): Rename `optind' and
`optarg' to `oind' and `oarg', respectively(-Wshadow).
(mi_cmd_target_file_put): Ditto.
(mi_cmd_target_file_delete): Ditto.
Andrey Smirnov [Sat, 17 Dec 2011 05:58:27 +0000 (05:58 +0000)]
* mi/mi-cmd-env.c (mi_cmd_env_path): Rename `optind' and
`optarg' to `oind' and `oarg', respectively(-Wshadow).
(mi_cmd_env_dir): Ditto.
Andrey Smirnov [Sat, 17 Dec 2011 05:53:59 +0000 (05:53 +0000)]
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Rename `optind' and `optarg'
to `oind' and `oarg', respectively(-Wshadow).
Andrey Smirnov [Sat, 17 Dec 2011 05:49:34 +0000 (05:49 +0000)]
* mi/mi-cmd-break.c (mi_cmd_break_insert): Rename `optind' and
`optparg' to `oind' and `oparg', respectively(-Wshadow).
(mi_cmd_break_watch): Ditto.
gdbadmin [Sat, 17 Dec 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Ian Lance Taylor [Fri, 16 Dec 2011 23:47:03 +0000 (23:47 +0000)]
* output.h (Output_data_reloc_generic::add): Only call
add_dynamic_reloc if this is a dynamic reloc section.
Alan Modra [Fri, 16 Dec 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Tom Tromey [Fri, 16 Dec 2011 21:39:16 +0000 (21:39 +0000)]
* linespec.c (collect_symbols): Call maybe_add_address after
calling symbol_to_sal.
(minsym_found): Call maybe_add_address here.
(search_minsyms_for_name): Don't call maybe_add_address.
Tom Tromey [Fri, 16 Dec 2011 21:35:57 +0000 (21:35 +0000)]
* linespec.c (struct collect_info) <objfile>: Remove field.
(decode_objc): Update.
(find_method): Update.
(decode_variable): Update.
(struct minsym_and_objfile): New.
(struct collect_minsyms): New.
(classify_mtype): New function.
(compare_msyms): Likewise.
(add_minsym): Likewise.
(check_minsym): Remove.
(search_minsyms_for_name): Sort minsyms and apply only those with
top priority.
Tom Tromey [Fri, 16 Dec 2011 21:17:42 +0000 (21:17 +0000)]
* cli/cli-cmds.c (filter_sals): Filter out sals with NULL symtab.
Pedro Alves [Fri, 16 Dec 2011 20:29:28 +0000 (20:29 +0000)]
2011-12-16 Pedro Alves <pedro@codesourcery.com>
* inf-loop.c: Include top.h.
(inferior_event_handler): Call check_frame_language.
* top.c (check_frame_language_change): New, factored out from ...
(execute_command): ... this. Use check_frame_language_change.
* top.h (check_frame_language_change): Declare.
Doug Evans [Fri, 16 Dec 2011 20:04:35 +0000 (20:04 +0000)]
fix typo in previous entry
Doug Evans [Fri, 16 Dec 2011 20:02:05 +0000 (20:02 +0000)]
* boards/native-stdiogdbserver.exp: New file.
Pierre Muller [Fri, 16 Dec 2011 19:55:26 +0000 (19:55 +0000)]
* windows-nat.c (cygwin_get_dr, cygwin_get_dr7): Add missing
prototypes.
Doug Evans [Fri, 16 Dec 2011 19:37:47 +0000 (19:37 +0000)]
* boards/native-gdbserver.exp: New file.
Doug Evans [Fri, 16 Dec 2011 19:10:58 +0000 (19:10 +0000)]
* linux-low.c (linux_create_inferior): If stdio connection,
redirect stdin from /dev/null, stdout to stderr.
* remote-utils.c (remote_is_stdio): New static global.
(remote_connection_is_stdio): New function.
(remote_prepare): Handle stdio connection.
(remote_open): Ditto.
(remote_close): Don't close stdin for stdio connections.
(read_prim,write_prim): New functions. Replace all calls to
read/write to these.
* server.c (main): Watch for "-" argument. Move call to
remote_prepare before start_inferior.
* server.h (STDIO_CONNECTION_NAME): New macro.
(remote_connection_is_stdio): Declare.
Doug Evans [Fri, 16 Dec 2011 19:06:38 +0000 (19:06 +0000)]
* NEWS: Add entry for stdio gdbserver.
gdbserver/
* linux-low.c (linux_create_inferior): If stdio connection,
redirect stdin from /dev/null, stdout to stderr.
* remote-utils.c (remote_is_stdio): New static global.
(remote_connection_is_stdio): New function.
(remote_prepare): Handle stdio connection.
(remote_open): Ditto.
(remote_close): Don't close stdin for stdio connections.
(read_prim,write_prim): New functions. Replace all calls to
read/write to these.
* server.c (main): Watch for "-" argument. Move call to
remote_prepare before start_inferior.
* server.h (STDIO_CONNECTION_NAME): New macro.
(remote_connection_is_stdio): Declare.
doc/
* gdb.texinfo (Server): Document -/stdio argument to gdbserver.
testsuite/
* lib/gdbserver-support.exp (gdb_target_cmd): Recognize stdio
gdbserver output.
(gdbserver_default_get_remote_address): New function.
(gdbserver_start): Call gdb,get_remote_address to compute argument
to "target remote" command.
Doug Evans [Fri, 16 Dec 2011 18:45:48 +0000 (18:45 +0000)]
* remote-utils.c (prepare_resume_reply): Remove extraneous \n
in debugging output.
Phil Muldoon [Fri, 16 Dec 2011 16:15:46 +0000 (16:15 +0000)]
2011-12-16 Phil Muldoon <pmuldoon@redhat.com>
* ChangeLog: Fix path typo.
* doc/ChangeLog: Ditto.
Phil Muldoon [Fri, 16 Dec 2011 15:55:40 +0000 (15:55 +0000)]
2011-12-16 Phil Muldoon <pmuldoon@redhat.com>
* testsuite/gdb.python/py-function.exp: Change "on" to "full" for
python print-stack. Add set/show python print-stack
off|full|message tests.
2011-12-16 Phil Muldoon <pmuldoon@redhat.com>
* python/python.c: Define python_excp_enums.
(eval_python_from_control_command): Do not call gdbpy_print_stack.
(python_command): Ditto.
(gdbpy_print_stack): Rewrite to use new enum constants.
(maint_set_python): Remove function.
(maint_show_python): Ditto.
(_initialize_python): Do not add "maint" commands. Add "set/show
python print-stack commands".
* NEWS: Update to reflect removal for "maint set/show
print-stack"
2011-12-16 Phil Muldoon <pmuldoon@redhat.com>
* doc/gdb.texinfo (Python Commands): Remove "maint set/show print
stack". Add documentation for "set/show python print-stack".
Tristan Gingold [Fri, 16 Dec 2011 13:39:03 +0000 (13:39 +0000)]
2011-12-16 Shinichiro Hamaji <shinichiro.hamaji@gmail.com>
* mach-o-i386.c (TARGET_PRIORITY): Define as 0 (top priority)
* mach-o-target.c (TARGET_NAME): Use TARGET_PRIORITY
* mach-o-x86-64.c (TARGET_PRIORITY): Define as 0 (top priority)
* mach-o.c (bfd_mach_o_header_p): Remove special handling for
mach-o-i386.
(TARGET_PRIORITY) Set 1 for mach-o-be and mach-o-le, and set 0 for
mach-o-fat.
Tristan Gingold [Fri, 16 Dec 2011 10:23:01 +0000 (10:23 +0000)]
binutils/
2011-12-16 Tristan Gingold <gingold@adacore.com>
* od-macho.c: Include mach-o/codesign.h
(OPT_CODESIGN): Define.
(options): Add an entry for codesign.
(mach_o_help): Likewise.
(dump_header): Fix indentation.
(dump_thread): Do not test result of xmalloc.
(bfd_mach_o_cs_magic, bfd_mach_o_cs_hash_type): New.
(dump_code_signature_superblob): New function.
(swap_code_codedirectory_v1_in): Likewise.
(hexdump): Likewise.
(dump_code_signature_codedirectory): Likewise.
(dump_code_signature_blob, dump_code_signature): Likewise.
(dump_load_command): Dump code signature.
(mach_o_dump): Likewise.
include/mach-o/
2011-12-16 Tristan Gingold <gingold@adacore.com>
* codesign.h: New file.
David Daney [Fri, 16 Dec 2011 06:18:55 +0000 (06:18 +0000)]
2011-12-15 David Daney <david.daney@cavium.com>
Nick Clifton <nickc@redhat.com>
* ld-elfvers/vers.exp (picflag): Set to -fpic for mips*-*-* when
using GCC-4.3 or later.
(pic): Set to "yes" for mips*-*-linux*.
* ld-elfvsb/elfvsb.exp: Don't test non-PIC shared libraried on
mips*-*-linux*.
(picflag): Set to -fpic for mips*-*-* when using GCC-4.3 or later.
* ld-elfweak/elfweak.exp (picflag): Set to -fpic for mips*-*-*
when using GCC-4.3 or later.
* ld-shared/shared.exp (picflag): Same.
* lib/ld-lib.exp (at_least_gcc_version): New proc.
Kevin Buettner [Fri, 16 Dec 2011 00:08:06 +0000 (00:08 +0000)]
* elf32-am33lin.c (elf32_am33lin_grok_prstatus): Add case
to correspond to a smaller ELF_NGREG defined by the kernel.
gdbadmin [Fri, 16 Dec 2011 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
H.J. Lu [Thu, 15 Dec 2011 23:29:24 +0000 (23:29 +0000)]
Replace <64, false> with <size, big_endian>
2011-12-15 H.J. Lu <hongjiu.lu@intel.com>
PR gold/13505
* target-reloc.h (apply_relocation): Replace <64, false> with
<size, big_endian>.
Alan Modra [Thu, 15 Dec 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Jeff Johnston [Thu, 15 Dec 2011 22:59:14 +0000 (22:59 +0000)]
2011-12-15 Jeff Johnston <jjohnstn@redhat.com>
* COPYING.LIBGLOSS: Add GPL with exception license.
Doug Evans [Thu, 15 Dec 2011 22:15:36 +0000 (22:15 +0000)]
* exceptions.c (catcher_list_size): New function.
(last_message): Delete.
(exception_messages, exception_messages_size): New static globals.
(throw_it): Use exception_messages array to handle nested calls.
H.J. Lu [Thu, 15 Dec 2011 17:30:58 +0000 (17:30 +0000)]
Set the default x32 interpreter to "/lib/ldx32.so.1"
2011-12-15 H.J. Lu <hongjiu.lu@intel.com>
* elf64-x86-64.c (ELF32_DYNAMIC_INTERPRETER): Set to
"/lib/ldx32.so.1".
Tom Tromey [Thu, 15 Dec 2011 15:36:55 +0000 (15:36 +0000)]
* symfile.c (symbol_file_add_with_addrs_or_offsets): Remove bad
do_cleanups call.
Tristan Gingold [Thu, 15 Dec 2011 14:04:52 +0000 (14:04 +0000)]
2011-12-15 Iain Sandoe <iains@gcc.gnu.org>
* mach-o.c (bfd_mach_o_mkobject_init): Initialize dyn_reloc_cache.
(bfd_mach_o_close_and_cleanup): Only cleanup Mach-O private data
for object files.
Yao Qi [Thu, 15 Dec 2011 12:43:03 +0000 (12:43 +0000)]
gdb/testsuite/
* gdb.trace/strace.c: New
* gdb.trace/strace.exp: New.
Yao Qi [Thu, 15 Dec 2011 12:40:03 +0000 (12:40 +0000)]
gdb/gdbserver/
* tracepoint.c: Include sys/syscall.h.
(gdb_ust_thread): Remove preprocessor conditional.
Tristan Gingold [Thu, 15 Dec 2011 11:43:52 +0000 (11:43 +0000)]
2011-12-15 Tristan Gingold <gingold@adacore.com>
* config/obj-macho.c (obj_mach_o_fileprop): Fix typo.
Nick Clifton [Thu, 15 Dec 2011 11:37:03 +0000 (11:37 +0000)]
* readelf.c (get_symbol_type): Add ELFOSABI_FREEBSD to the
supported abi's.
* config/obj-elf.c (obj_elf_type): Add ELFOSABI_FREEBSD to the
supported abi's.
Tristan Gingold [Thu, 15 Dec 2011 11:01:14 +0000 (11:01 +0000)]
2011-12-15 Shinichiro Hamaji <shinichiro.hamaji@gmail.com>
* mach-o.c (bfd_mach_o_canonicalize_reloc): Update relocation
table only when there isn't the cahce.
(bfd_mach_o_get_dynamic_reloc_upper_bound): Need one more space
for a pointer for the watchdog.
(bfd_mach_o_canonicalize_dynamic_reloc): Utilize cache like
bfd_mach_o_canonicalize_reloc.
(bfd_mach_o_close_and_cleanup): Call bfd_mach_o_free_cached_info.
(bfd_mach_o_free_cached_info): Free up cache data.
* mach-o.h (reloc_cache): A place to store cache of dynamic relocs.
(bfd_mach_o_free_cached_info): Add declaration.
Tristan Gingold [Thu, 15 Dec 2011 10:56:48 +0000 (10:56 +0000)]
bfd/
2011-12-15 Iain Sandoe <iains@gcc.gnu.org>
* mach-o-target.c (bfd_mach_o_bfd_set_private_flags): Use
bfd_mach_o_bfd_set_private_flags.
* mach-o.c (bfd_mach_o_bfd_set_private_flags): New.
* mach-o.h (bfd_mach_o_bfd_set_private_flags): Declare.
gas/
2011-12-15 Iain Sandoe <iains@gcc.gnu.org>
* config/obj-macho.c (obj_mach_o_subsections_by_symbols): New global.
(obj_mach_o_file_properties): New enum.
(obj_mach_o_subsections_via_symbols): Generalize name to...
... (obj_mach_o_fileprop) and use to set subsections_via_symbols.
gas/testsuite/
2011-12-15 Iain Sandoe <iains@gcc.gnu.org>
* gas/mach-o/subsect-via-symbols-0.d: New.
* gas/mach-o/subsect-via-symbols-1.d: New.
* gas/mach-o/subsect-via-symbols.s: New.
Nick Clifton [Thu, 15 Dec 2011 10:21:51 +0000 (10:21 +0000)]
* frv.opc (parse_uhi16): Fix handling of %hi operator on 64-bit
hosts.
* cgen-asm.c (cgen_parse_signed_integer): Add code to handle the
sign extension of negative values on a 64-bit host.
* frv-asm.c: Regenerate.
* gas/frv/immediates.s: New test file - checks assembly of
constant values.
* gas/frv/immediates.d: Expected disassmbly.
* gas/frv/allinsn.exp: Run the new test.
Jie Zhang [Thu, 15 Dec 2011 04:25:10 +0000 (04:25 +0000)]
gas/
2011-12-14 Stuart Henderson <shenders@gcc.gnu.org>
* config/bfin-parse.y (asm_1): set SRCx fields to all 1s for
dspalu32 instrs that don't use them.
gas/testsuite/
2011-12-14 Stuart Henderson <shenders@gcc.gnu.org>
* gas/bfin/move.d: Update SRCx field expectations.
* gas/bfin/move2.d: Likewise.
* gas/bfin/parallel.d: Likewise.
* gas/bfin/parallel2.d: Likewise.
* gas/bfin/parallel3.d: Likewise.
* gas/bfin/parallel4.d: Likewise.
* gas/bfin/video.d: Likewise.
* gas/bfin/video2.d: Likewise.
gdbadmin [Thu, 15 Dec 2011 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 14 Dec 2011 23:00:06 +0000 (23:00 +0000)]
daily update
Doug Evans [Wed, 14 Dec 2011 20:53:57 +0000 (20:53 +0000)]
* defs.h (wait_to_die_with_timeout): Declare.
* utils.c: #include "gdb_wait.h".
(sigalrm_handler, wait_to_die_with_timeout): New functions.
* ser-pipe.c: Don't #include "gdb_wait.h".
(pipe_close): Give child a chance to die on its own after closing
its stdin before SIGTERM'ing it.
Joel Brobecker [Wed, 14 Dec 2011 20:27:47 +0000 (20:27 +0000)]
Fix latest ChangeLog entry (forgot to give credit to reporter)
Joel Brobecker [Wed, 14 Dec 2011 20:24:59 +0000 (20:24 +0000)]
fix uninitialized field in ada-lang.c (struct match_data)
Field found_sym in add_nonlocal_symbols's struct match_data is
used uninitialized. Rather than adding the initialization of
this field (to zero), we set the entire structure to zero first,
and then set the fields that need to be initialized to non-zero
next.
gdb/ChangeLog:
* ada-lang.c (add_nonlocal_symbols): Initialize data to
all zeros. Remove setting of data.arg_sym to NULL.
Tom Tromey [Wed, 14 Dec 2011 19:59:25 +0000 (19:59 +0000)]
* gdb.dwarf2/dw2-inline-param.exp: Log the objcopy command.
Doug Evans [Wed, 14 Dec 2011 19:50:18 +0000 (19:50 +0000)]
* lib/gdb.exp (gdb_start_cmd): Fix error return value.
Doug Evans [Wed, 14 Dec 2011 18:55:12 +0000 (18:55 +0000)]
Fix typo in "Changes since ...".
Pedro Alves [Wed, 14 Dec 2011 17:33:24 +0000 (17:33 +0000)]
2011-12-14 Pedro Alves <pedro@codesourcery.com>
* linux-low.c (linux_detach_one_lwp): Call
the_low_target.prepare_to_resume before detaching.
Pedro Alves [Wed, 14 Dec 2011 17:20:32 +0000 (17:20 +0000)]
gdb/
2011-12-14 Pedro Alves <pedro@codesourcery.com>
PR threads/10729
* linux-nat.c (linux_nat_new_thread): Change parameter to an lwp
pointer.
(linux_nat_prepare_to_resume): New global.
(lwp_free): New.
(purge_lwp_list): Use it.
(add_lwp): Call linux_nat_new_thread even on the first LWP.
Adjust to interface change.
(delete_lwp): Call lwp_free instead of xfree.
(detach_callback, linux_nat_detach, resume_lwp, linux_nat_resume)
(linux_handle_syscall_trap, linux_handle_extended_wait)
(linux_nat_filter_event, resume_stopped_resumed_lwps): Call
linux_nat_prepare_to_resume before resuming.
(linux_stop_lwp): New.
(linux_nat_set_new_thread): Adjust.
(linux_nat_set_prepare_to_resume): New.
* linux-nat.h (struct arch_lwp_info): Forward declare.
(struct lwp_info) <arch_private>: New field.
(linux_stop_lwp): Declare.
(linux_nat_set_new_thread): Adjust.
(linux_nat_set_prepare_to_resume): New.
* i386-nat.c (DR_NADDR, DR_STATUS, DR_CONTROL)
(struct i386_debug_reg_state): Move to i386-nat.h.
(dr_mirror): Comment.
(i386_debug_reg_state): New.
(i386_update_inferior_debug_regs): Simplify.
(i386_stopped_data_address): Use the debug register state from the
inferior, not from the local cache.
* i386-nat.h (struct i386_dr_low_type): Delete reset_addr and
unset_status fields. New get_addr and get_control fields.
(DR_FIRSTADDR, DR_LASTADDR, DR_CONTROL): Moved from i386-nat.c.
(DR_NADDR, DR_STATUS): New.
(struct i386_debug_reg_state): Moved from i386-nat.c.
* amd64-linux-nat.c (struct arch_lwp_info): New.
(amd64_linux_dr): Delete global.
(amd64_linux_dr_get_addr): New.
(amd64_linux_dr_get_control): New.
(amd64_linux_dr_unset_status): Delete.
(amd64_linux_dr_set_addr): Reimplement.
(amd64_linux_dr_reset_addr): Delete.
(update_debug_registers_callback): New.
(amd64_linux_dr_set_control): Reimplement.
(amd64_linux_dr_set_addr): Reimplement.
(amd64_linux_prepare_to_resume): New.
(amd64_linux_new_thread): Change parameter to an lwp pointer.
Reimplement.
(_initialize_amd64_linux_nat): No longer install
i386_dr_low.reset_addr and i386_dr_low.unset_status. Install
amd64_linux_dr_get_control as i386_dr_low.get_control. Install
amd64_linux_dr_get_addr as i386_dr_low.get_addr. Install
amd64_linux_prepare_to_resume.
* i386-linux-nat.c (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS)
(DR_CONTROL): Delete.
(struct arch_lwp_info): New.
(i386_linux_dr): Delete global.
(i386_linux_dr_set_control): Reimplement.
(i386_linux_dr_get_addr): New.
(i386_linux_dr_set_addr): Reimplement.
(i386_linux_dr_get_control): New.
(update_debug_registers_callback): New.
(i386_linux_dr_unset_status): Delete.
(i386_linux_dr_set_addr): Reimplement.
(i386_linux_prepare_to_resume): New.
(i386_linux_new_thread): Change parameter to an lwp pointer.
Reimplement.
(_initialize_i386_linux_nat): No longer install
i386_dr_low.reset_addr and i386_dr_low.unset_status. Install
i386_linux_dr_get_control as i386_dr_low.get_control. Install
i386_linux_dr_get_addr as i386_dr_low.get_addr. Install
i386_linux_prepare_to_resume.
* arm-linux-nat.c (arm_linux_new_thread): Change parameter to an
lwp pointer. Adjust.
* ia64-linux-nat.c (ia64_linux_new_thread): Likewise.
* mips-linux-nat.c (mips_linux_new_thread): Likewise.
* ppc-linux-nat.c (ppc_linux_new_thread): Likewise.
* s390-nat.c (s390_fix_watch_points): Likewise.
* i386-darwin-nat.c (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS)
(DR_CONTROL): Delete.
(i386_darwin_dr_reset_addr): Delete.
(i386_darwin_dr_get_addr): New.
(i386_darwin_dr_get_control): New.
* go32-nat.c
(go32_get_dr7, go32_get_dr): New.
(init_go32_ops): No longer install i386_dr_low.reset_addr.
Install go32_get_dr7 as i386_dr_low.get_control. Install
go32_get_dr as i386_dr_low.get_addr.
* i386bsd-nat.c (i386bsd_dr_get): New.
(i386bsd_dr_reset_addr): Delete.
(i386bsd_dr_get_addr): New.
(i386bsd_dr_get_status): Use i386bsd_dr_get.
(i386bsd_dr_get_control): New.
* i386bsd-nat.h (i386bsd_dr_reset_addr): Delete.
(i386bsd_dr_get_addr): New.
(i386bsd_dr_get_control): New.
* i386fbsd-nat.c (_initialize_i386fbsd_nat): No longer install
i386_dr_low.reset_addr and i386_dr_low.unset_status. Install
i386bsd_dr_get_control as i386_dr_low.get_control. Install
i386bsd_dr_get_addr as i386_dr_low.get_addr.
* windows-nat.c (init_windows_ops): No longer install
i386_dr_low.reset_addr and i386_dr_low.unset_status. Install
cygwin_get_dr7 as i386_dr_low.get_control. Install cygwin_get_dr
as i386_dr_low.get_addr.
(cygwin_get_dr): New.
(cygwin_get_dr7): New.
gdb/testsuite/
2011-12-14 Pedro Alves <pedro@codesourcery.com>
PR threads/10729
* gdb.mi/watch-nonstop.c: New file.
* gdb.mi/mi-watch-nonstop.exp: New file.
Nick Clifton [Wed, 14 Dec 2011 16:12:13 +0000 (16:12 +0000)]
When computing checksums, skip the contents of sections with the SHT_NOBITS type.
Revert change to compress.c
Doug Evans [Wed, 14 Dec 2011 16:05:59 +0000 (16:05 +0000)]
Add PR gdb/8367 to basenames-may-differ patch.
Tristan Gingold [Wed, 14 Dec 2011 15:32:25 +0000 (15:32 +0000)]
2011-12-14 Iain Sandoe <iains@gcc.gnu.org>
* gas/mach-o/comm-1.d: New.
* gas/mach-o/comm-1.s: New.
* gas/mach-o/lcomm-1.s: New.
* gas/mach-o/mach-o.exp: Update to use run_dump_tests[].
* gas/mach-o/sections-1.d: New.
* gas/mach-o/sections-1.s: New.
* gas/mach-o/warn-1.s: Add .comm alignment range warning.
Doug Evans [Wed, 14 Dec 2011 15:31:55 +0000 (15:31 +0000)]
Add PR # 7200 to: Make "!" an alias for "shell".
Pedro Alves [Wed, 14 Dec 2011 14:55:27 +0000 (14:55 +0000)]
2011-12-14 Pedro Alves <pedro@codesourcery.com>
* ia64-tdep.c (ia64_memory_remove_breakpoint): Use
target_write_raw_memory.
* m32r-tdep.c (m32r_memory_remove_breakpoint): Use
target_write_raw_memory.
* microblaze-linux-tdep.c
(microblaze_linux_memory_remove_breakpoint): Use
target_write_raw_memory.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Use
target_write_raw_memory.
Pedro Alves [Wed, 14 Dec 2011 14:46:24 +0000 (14:46 +0000)]
2011-12-14 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Implementing a Remote Stub): Explain that you
should transfer control to the stub in the startup code instead of
in main. Mention the need to get past the initial breakpoint.
Joel Brobecker [Wed, 14 Dec 2011 14:34:59 +0000 (14:34 +0000)]
Make decode_line_internal static.
gdb/ChangeLog:
* linespec.c (decode_line_internal): Make static.
Nick Clifton [Wed, 14 Dec 2011 14:10:57 +0000 (14:10 +0000)]
* config/tc-cris.c (md_convert_frag): Mark the length_code local
variable as unused as it is only used when ENABLE_CHECKING is on.
Tristan Gingold [Wed, 14 Dec 2011 13:27:34 +0000 (13:27 +0000)]
2011-12-14 Iain Sandoe <iains@gcc.gnu.org>
* gas/mach-o: New.
* gas/mach-o/mach-o.exp: New.
* gas/mach-o/warn-1.s: New.
* gas/mach-o/lcomm-1.s: New.
* gas/mach-o/lcomm-1.d: New.
Nick Clifton [Wed, 14 Dec 2011 11:50:13 +0000 (11:50 +0000)]
PR ld/12451
* elfcode.h (elf_checksum_contents): Read in the section's
contents if they are not already available.
* compress.c (bfd_get_full_section_contents): Use zmalloc to
allocate the buffers so that excess bytes are guaranteed to be
zero.
Tristan Gingold [Wed, 14 Dec 2011 10:30:09 +0000 (10:30 +0000)]
bfd/
2011-12-14 Iain Sandoe <iains@gcc.gnu.org>
* mach-o-i386.c (text_section_names_xlat): New table.
(data_section_names_xlat): Likewise.
(import_section_names_xlat): Likewise.
(mach_o_i386_segsec_names_xlat): Likewise.
(bfd_mach_o_tgt_seg_table): Use new tables.
* mach-o-x86-64.c (bfd_mach_o_tgt_seg_table): Set NULL.
* mach-o.c (mach_o_section_name_xlat, mach_o_segment_name_xlat):
Move to mach-o.h as typedefs.
(text_section_names_xlat): Update for current GCC usage.
(data_section_names_xlat): Likewise.
(dwarf_section_names_xlat): Likewise.
(objc_section_names_xlat): New table.
(segsec_names_xlat): Add objc table.
(bfd_mach_o_normalize_section_name): Replace with...
(bfd_mach_o_section_data_for_mach_sect): New.
(bfd_mach_o_section_data_for_bfd_name): New.
(bfd_mach_o_section_data_for_bfd_name): Update to use additional data.
(bfd_mach_o_convert_section_name_to_mach_o): Likewise.
(bfd_mach_o_bfd_copy_private_section_data): Implement.
(bfd_mach_o_write_symtab): Write a zero-length string as the first entry
for compatibility with system tools.
(bfd_mach_o_build_commands): Update section alignment info.
(bfd_mach_o_new_section_hook): Use translation table data to define
default section flags, type, attributes and alignment, when available.
(bfd_mach_o_init_section_from_mach_o): Add TODO comment.
(bfd_mach_o_section_type_name): Add 'symbol_stubs'.
(bfd_mach_o_section_attribute_name): Add 'self_modifying_code'.
(bfd_mach_o_get_section_type_from_name): Change "not-found" return
value.
(bfd_mach_o_tgt_seg_table): Set default NULL.
* mach-o.h (bfd_mach_o_segment_command): Use define for name length.
(bfd_mach_o_backend_data): Move until after contents are defined.
(bfd_mach_o_normalize_section_name): Remove.
(bfd_mach_o_convert_section_name_to_bfd): Declare.
(mach_o_section_name_xlat): Declare.
(mach_o_segment_name_xlat): Declare.
(bfd_mach_o_section_data_for_mach_sect): Declare.
(bfd_mach_o_section_data_for_bfd_name): Declare.
include/
2011-12-14 Iain Sandoe <iains@gcc.gnu.org>
* mach-o/loader.h (bfd_mach_o_section_type): define
BFD_MACH_O_S_ATTR_NONE to 0.
gas/
2011-12-14 Iain Sandoe <iains@gcc.gnu.org>
* config/obj-macho.c: Add some more top-level comments.
(collect_16char_name): New.
(obj_mach_o_section): Amend to allow syntax compatible with existing system
tools. Use section translation data when available.
(obj_mach_o_segT_from_bfd_name): New.
(known_sections): Update.
(obj_mach_o_known_section): Use obj_mach_o_segT_from_bfd_name.
(objc_sections): New.
(obj_mach_o_objc_section): New.
(debug_sections): New.
(obj_mach_o_debug_section): New.
(tgt_sections): New.
(obj_mach_o_opt_tgt_section): New.
(obj_mach_o_base_section): New.
(obj_mach_o_common_parse): Update to create BSS on demand and to handle
lcomm optional alignment param.
(obj_mach_o_comm): Update parameter name.
(obj_mach_o_placeholder): New.
(mach_o_pseudo_table): Update for GCC section directives.
* config/obj-macho.h (_OBJ_MACH_O_H): New.
(USE_ALIGN_PTWO): Define.
(S_SET_ALIGN) Define.
Yao Qi [Wed, 14 Dec 2011 07:56:59 +0000 (07:56 +0000)]
gdb/
* breakpoint.c (create_breakpoint): Set canonical.addr_string
for static tracepoint.
Yao Qi [Wed, 14 Dec 2011 07:47:15 +0000 (07:47 +0000)]
gdb/gdbserver/
* tracepoint.c (gdb_ust_thread): Don't ignore return value
of write.
Yao Qi [Wed, 14 Dec 2011 07:41:06 +0000 (07:41 +0000)]
2011-12-14 Yao Qi <yao@codesourcery.com>
* i386-low.c (i386_low_stopped_data_address): Initialize local
variable `control'.
gdbadmin [Wed, 14 Dec 2011 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 13 Dec 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Pedro Alves [Tue, 13 Dec 2011 17:22:11 +0000 (17:22 +0000)]
gdb/doc/
2011-12-13 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Implementing a Remote Stub): Explain that you
should transfer control to the stub in the startup code instead of
in main. Mention the need to get past the initial breakpoint.
gdb/testsuite/
2011-12-13 Pedro Alves <pedro@codesourcery.com>
Doug Evans <dje@google.com>
* lib/gdb.exp (gdb_run_cmd, runto_main, gdb_compile)
(clean_restart): Remove references to the gdb_stub target board
variable.
(gdb_step_for_stub): Delete.
* gdb.base/annota1.exp: Remove all references to [target_info
exists gdb_stub], gdb_step_for_stub and usestubs.
* gdb.base/annota3.exp: Ditto.
* gdb.base/async.exp: Ditto.
* gdb.base/break.exp: Ditto.
* gdb.base/code-expr.exp: Ditto.
* gdb.base/commands.exp: Ditto.
* gdb.base/completion.exp: Ditto.
* gdb.base/condbreak.exp: Ditto.
* gdb.base/consecutive.exp: Ditto.
* gdb.base/cvexpr.exp: Ditto.
* gdb.base/define.exp: Ditto.
* gdb.base/display.exp: Ditto.
* gdb.base/ena-dis-br.exp: Ditto.
* gdb.base/environ.exp: Ditto.
* gdb.base/gnu-ifunc.exp: Ditto.
* gdb.base/maint.exp: Ditto.
* gdb.base/pending.exp: Ditto.
* gdb.base/sect-cmd.exp: Ditto.
* gdb.base/sepdebug.exp: Ditto.
* gdb.base/unload.exp: Ditto.
* gdb.base/watchpoint-solib.exp: Ditto.
* gdb.cp/annota2.exp: Ditto.
* gdb.cp/annota3.exp: Ditto.
* gdb.dwarf2/dw2-inline-param.exp: Ditto.
* gdb.hp/gdb.compat/xdb1.exp: Ditto.
* gdb.mi/mi-pending.exp: Ditto.
* gdb.trace/circ.exp: Ditto.
* gdb.cp/ovldbreak.exp: Ditto. Adjust expected line numbers.
* gdb.base/list.exp: Ditto.
* gdb.base/all-types.c: Remove all calls to set_debug_traps and
breakpoint function and all references to the usestubs macro.
* gdb.base/exprs.c: Ditto.
* gdb.base/freebpcmd.c: Ditto.
* gdb.base/bitfields.c: Ditto.
* gdb.base/bitfields2.c: Ditto.
* gdb.base/break.c: Ditto.
* gdb.base/call-sc.c: Ditto.
* gdb.base/call-signals.c: Ditto.
* gdb.base/callfuncs.c: Ditto.
* gdb.base/charset.c: Ditto.
* gdb.base/consecutive.c: Ditto.
* gdb.base/constvars.c: Ditto.
* gdb.base/funcargs.c: Ditto.
* gdb.base/int-type.c: Ditto.
* gdb.base/interrupt.c: Ditto.
* gdb.base/langs0.c: Ditto.
* gdb.base/list0.c: Ditto.
* gdb.base/mips_pro.c: Ditto.
* gdb.base/miscexprs.c: Ditto.
* gdb.base/nodebug.c: Ditto.
* gdb.base/opaque0.c: Ditto.
* gdb.base/pointers.c: Ditto.
* gdb.base/printcmds.c: Ditto.
* gdb.base/ptype.c: Ditto.
* gdb.base/recurse.c: Ditto.
* gdb.base/reread1.c: Ditto.
* gdb.base/reread2.c: Ditto.
* gdb.base/restore.c: Ditto.
* gdb.base/return.c: Ditto.
* gdb.base/run.c: Ditto.
* gdb.base/scope0.c: Ditto.
* gdb.base/sepdebug.c: Ditto.
* gdb.base/setshow.c: Ditto.
* gdb.base/setvar.c: Ditto.
* gdb.base/sigall.c: Ditto.
* gdb.base/signals.c: Ditto.
* gdb.base/structs.c: Ditto.
* gdb.base/structs2.c: Ditto.
* gdb.base/testenv.c: Ditto.
* gdb.base/twice.c: Ditto.
* gdb.base/unwindonsignal.c: Ditto.
* gdb.base/watchpoint.c: Ditto.
* gdb.base/watchpoints.c: Ditto.
* gdb.base/whatis.c: Ditto.
* gdb.cp/classes.cc: Ditto.
* gdb.cp/cplusfuncs.cc: Ditto.
* gdb.cp/derivation.cc: Ditto.
* gdb.cp/formatted-ref.cc: Ditto.
* gdb.cp/misc.cc: Ditto.
* gdb.cp/overload.cc: Ditto.
* gdb.cp/ovldbreak.cc: Ditto.
* gdb.cp/ref-params.cc: Ditto.
* gdb.cp/ref-types.cc: Ditto.
* gdb.cp/templates.cc: Ditto.
* gdb.cp/virtfunc.cc: Ditto.
* gdb.hp/gdb.aCC/run.c: Ditto.
* gdb.hp/gdb.base-hp/callfwmall.c: Ditto.
* gdb.hp/gdb.compat/xdb0.c: Ditto.
* gdb.reverse/consecutive-reverse.c: Ditto.
* gdb.reverse/sigall-reverse.c: Ditto.
* gdb.reverse/until-reverse.c: Ditto.
* gdb.reverse/watch-reverse.c: Ditto.
* gdb.trace/actions.c: Ditto.
* gdb.trace/circ.c: Ditto.
* gdb.trace/collection.c: Ditto.
Pedro Alves [Tue, 13 Dec 2011 16:11:26 +0000 (16:11 +0000)]
2011-12-13 Pedro Alves <pedro@codesourcery.com>
PR remote/13492
* i386-low.c (i386_low_stopped_data_address): Avoid fetching
DR_CONTROL unless necessary. Extend comments.
* linux-x86-low.c (x86_linux_prepare_to_resume): Don't write to
DR0-3 if not used. If any watchpoint was set, clear DR_STATUS.
Pedro Alves [Tue, 13 Dec 2011 16:05:24 +0000 (16:05 +0000)]
2011-12-13 Pedro Alves <pedro@codesourcery.com>
* gdb.base/watchpoint.c (struct foo2, foo2, struct foo4, foo4)
(func6, func7): New.
(main): Call func6 and func7.
* gdb.base/watchpoint.exp (test_wide_location_1)
(test_wide_location_2): New.
(top level): Re-enable hardware watchpoints if necessary. Call
test_wide_location_1 and test_wide_location_2.
Tristan Gingold [Tue, 13 Dec 2011 14:02:20 +0000 (14:02 +0000)]
2011-12-13 Shinichiro Hamaji <shinichiro.hamaji@gmail.com>
* dwarf2.c (bfd_dwarf2_cleanup_debug_info): Accept stash as an
argument like other functions to support formats other than ELF.
* elf-bfd.h (bfd_dwarf2_cleanup_debug_info): Move to bfd-in.h.
* elf.c (_bfd_elf_close_and_cleanup): Pass dwarf2_find_line_info
in tdata as a parameter.
* libbfd-in.h (bfd_dwarf2_cleanup_debug_info): Move from
elf-bfd.h.
* libbfd.h (bfd_dwarf2_cleanup_debug_info): Regenerate.
* mach-o-target.c (bfd_mach_o_close_and_cleanup): Remove the
fallback macro.
(bfd_mach_o_find_nearest_line): Likewise.
* mach-o.c (bfd_mach_o_find_nearest_line): Add the definition
which calls _bfd_dwarf2_find_nearest_line.
(bfd_mach_o_close_and_cleanup): Likewise.
* mach-o.h (mach_o_data_struct): Add dwarf2_find_line_info.
(bfd_mach_o_find_nearest_line): Add declaration.
(bfd_mach_o_close_and_cleanup): Add declaration.
Joel Brobecker [Tue, 13 Dec 2011 13:36:38 +0000 (13:36 +0000)]
Create new section in NEWS for next release branch
gdb/ChangeLog:
* NEWS: Create a new section for the next release branch.
Rename the section of the current branch, now that it has
been cut.
Nick Clifton [Tue, 13 Dec 2011 13:33:21 +0000 (13:33 +0000)]
* po/it.po: New Italian translation.
* configure.in (ALL_LINGUAS): Add it.
* configure: Regenerate.
gdbadmin [Tue, 13 Dec 2011 13:06:15 +0000 (13:06 +0000)]
Record GDB 7.4 branch creation. Bump version number to 7.4.50.
20111213-cvs.
Nick Clifton [Tue, 13 Dec 2011 12:56:33 +0000 (12:56 +0000)]
* doc/internals.texi (TC_FORCE_RELOCATION_SUB_SAME): Update
to match code.
Tristan Gingold [Tue, 13 Dec 2011 10:00:40 +0000 (10:00 +0000)]
Missing file from my previous commit.
Tristan Gingold [Tue, 13 Dec 2011 09:13:15 +0000 (09:13 +0000)]
bfd/
2011-12-13 Tristan Gingold <gingold@adacore.com>
* mach-o.c (bfd_mach_o_read_symtab_symbols): Make global. Remove
prototype.
(bfd_mach_o_section_get_entry_size): Make global.
(bfd_mach_o_section_get_nbr_indirect): Likewise.
(bfd_mach_o_read_symtab_strtab): Likewise.
(struct bfd_mach_o_xlat_name): Move to mach-o.h
(bfd_mach_o_print_flags): Move to binutils/od-macho.c
(bfd_mach_o_get_name_of_null, bfd_mach_o_get_name): Likewise.
(bfd_mach_o_cpu_name, bfd_mach_o_filetype_name): Likewise.
(bfd_mach_o_header_flags_name): Likewise.
(bfd_mach_o_load_command_name): Likewise.
(bfd_mach_o_print_private_header): Likewise.
(bfd_mach_o_print_section_map, bfd_mach_o_print_section): Likwise.
(bfd_mach_o_print_segment, bfd_mach_o_print_dysymtab): Likewise.
(bfd_mach_o_print_dyld_info): Likewise.
(bfd_mach_o_print_private_bfd_data): Remove.
(bfd_mach_o_type_name): Make global.
(bfd_mach_o_section_attribute_name): Likewise.
* mach-o.h (bfd_mach_o_xlat_name): Added.
(bfd_mach_o_section_get_nbr_indirect)
(bfd_mach_o_section_get_entry_size)
(bfd_mach_o_read_symtab_symbols)
(bfd_mach_o_read_symtab_strtab)
(bfd_mach_o_section_attribute_name)
(bfd_mach_o_section_type_name): Likewise.
* mach-o-target.c (bfd_mach_o_bfd_print_private_bfd_data): Define.
binutils/
2011-12-13 Tristan Gingold <gingold@adacore.com>
* od-macho.c: New file.
* objdump.h (objdump_private_desc_mach_o): Add.
* configure.in: Add Mach-O od_vectors.
* Makefile.am (CFILES): Add od-macho.c
* configure: Regenerate.
* Makefile.in: Regenerate.
Alan Modra [Tue, 13 Dec 2011 08:19:02 +0000 (08:19 +0000)]
* ppc-opc.c (ISA_V2): Define and use for relevant BO field tests.
(valid_bo_pre_v2, valid_bo_post_v2): New functions, extracted from..
(valid_bo): ..here. When disassembling, accept either 'y' or 'at'
type encoding on second pass.
(powerpc_opcodes): Use ISA_V2 to enable branch insns rather than
POWER4.
* ppc-dis.c (print_insn_powerpc): Delete dialect_orig. Instead
ignore deprecated on second pass.
Chung-Lin Tang [Tue, 13 Dec 2011 06:22:01 +0000 (06:22 +0000)]
2011-12-13 Chung-Lin Tang <cltang@codesourcery.com>
* elfxx-mips.c (mips_elf_calculate_relocation): Correct
R_MIPS16_HI16/R_MIPS16_LO16 handling of two cleared lower bits,
update comments.
Yao Qi [Tue, 13 Dec 2011 01:26:56 +0000 (01:26 +0000)]
2011-12-13 Yao Qi <yao@codesourcery.com>
* tracepoint.c (trace_buffer_alloc): Replace magic numbers with
macros.
(upload_fast_traceframes, upload_fast_traceframes): Likewise.
gdbadmin [Tue, 13 Dec 2011 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 12 Dec 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Tristan Gingold [Mon, 12 Dec 2011 13:45:47 +0000 (13:45 +0000)]
2011-12-12 Iain Sandoe <iains@gcc.gnu.org>
* mach-o.c (bfd_mach_o_read_section_32): Null-terminate sectname.
(bfd_mach_o_read_section_64): Likewise.
Yao Qi [Mon, 12 Dec 2011 02:11:45 +0000 (02:11 +0000)]
2011-12-11 Yao Qi <yao@codesourcery.com>
* gdb.trace/status-stop.exp: Skip it if target doesn't support trace.
This page took 0.043532 seconds and 4 git commands to generate.