H Hartley Sweeten [Tue, 1 Oct 2013 22:14:46 +0000 (15:14 -0700)]
staging: comedi: ni_6527: tidy up the comedi_driver declaration
For aesthetics, add some whitespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:14:27 +0000 (15:14 -0700)]
staging: comedi: ni_6527: tidy up ni6527_auto_attach()
For aesthetics, allocate the private data memory before attempting
to enable the PCI device.
Add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:14:07 +0000 (15:14 -0700)]
staging: comedi: ni_6527: tidy up the interrupt subdevice
Do the request_irq() before setting up the subdevices. Only initialize
the interrupt subdevice if the irq is actually available.
Tidy up the whitespace in the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:13:48 +0000 (15:13 -0700)]
staging: comedi: ni_6527: introduce ni6527_reset()
Factor the board reset code out of the (*attach). Do the reset as
soon as possible to ensure the interrupts are disabled.
For convienence, use the ni6257_reset() during the (*detach) instead
of just disabling the interrupts.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:13:32 +0000 (15:13 -0700)]
staging: comedi: ni_6527: remove COMEDI_MITE dependancy
The COMEDI_MITE driver is a wrapper for the National Instruments
PCI MITE ASIC. This driver includes the PCI boilerplate used to
remap the resources as well as the support code for bus mastered
DMA.
The ni_6527 does not support DMA and the COMEDI_MITE driver adds
unnecessary complexity.
Remove the need for the COMEDI_MITE driver by handling the ioremap
directly in the (*attach). Store the ioremap'ed address in the
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:13:14 +0000 (15:13 -0700)]
staging: comedi: ni_6527: tidy up ni6527_intr_insn_config()
Handle the instruction (data[0]) with a switch to make it easier
to add additional instructions in the future.
To clarify the code, factor out the code that sets the rising/falling
edge detection.
Rename the CamelCase defines used for the rising/falling edge detection
registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:12:55 +0000 (15:12 -0700)]
staging: comedi: ni_6527: tidy up ni6527_intr_cancel()
For aesthetics, use a local variable for the __iomem base address
used to write to the registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:12:35 +0000 (15:12 -0700)]
staging: comedi: ni_6527: tidy up ni6527_intr_cmd()
For aesthetics, use a local variable for the __iomem base address
used to write to the registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:12:19 +0000 (15:12 -0700)]
staging: comedi: ni_6527: rename CamelCase defines for the control register
Rename the CamelCase defines used for the interrupt control register.
To clarify the code a bit, add two new defines to enable/disable the
interrupts.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:11:58 +0000 (15:11 -0700)]
staging: comedi: ni_6527: rename CamelCase defines for the clear register
Rename the CamelCase defines used for the clear register.
To clarify the code a bit, add two new defines that group the bits needed
to clear the interrupts and reset the digital input deglitch filter.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:11:39 +0000 (15:11 -0700)]
staging: comedi: ni_6527: tidy up ni6527_interrupt()
Rename the CamelCase defines used for the interrupt status register.
The NI6527_STATUS_IRQ bit will be set whenever the device is asserting
an interrupt. Modify the function a bit so this is the only requirement
for the interrupt to be IRQ_HANDLED. Currently an OVERFLOW interrupt is
not handled, though it's unlikely this would occur without an EDGE
interrupt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:11:21 +0000 (15:11 -0700)]
staging: comedi: ni_6527: use dev->read_subdev in interrupt handler
The comedi_subdevice in the interrupt handler is the dev->read_subdev
that was initialized during the attach. Use that instead of accessing
the dev->subdevices[] array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:11:00 +0000 (15:11 -0700)]
staging: comedi: ni_6527: tidy up ni6527_{di, do}_insn_bits()
The digital input and output ports are different. Split the CamelCase
Port_Register() define into separate NI6527_DI_REG() and NI6527_DO_REG()
defines to make this clear.
Tidy up the functions a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:10:41 +0000 (15:10 -0700)]
staging: comedi: ni_6527: tidy up ni6527_di_insn_config()
The core will validate the insn->n value based on the actual instruction
(data[0]) that is being handled. Remove the sanity check and change the
instruction handling into a switch. This follows the normal format for
(*insn_config) functions and make adding additional instructions easier.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:10:22 +0000 (15:10 -0700)]
staging: comedi: ni_6527: factor out the code that sets the filter enables
To clarify the digital input subdevice (*insn_config) a bit, factor out the
code that sets the filter enables to enable deglitching the digital inputs.
Also, rename the CamelCase define used for the filter enable registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:09:42 +0000 (15:09 -0700)]
staging: comedi: ni_6527: factor out the code that sets the filter interval
To clarify the digital input subdevice (*insn_config) a bit, factor out the
code that sets the filter interval for deglitching the digital inputs.
Also, rename the CamelCase define used for the filter interval registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:09:16 +0000 (15:09 -0700)]
staging: comedi: ni_6527: remove extra probe noise
The dev_info() showing the board id is just extra noise.
Remove it but make sure the probed id is correct. Rename the CamelCase
define used for the id register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:08:58 +0000 (15:08 -0700)]
staging: comedi: ni_6527: remove unused DEBUG* defines
These defines are not used in the driver. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:08:40 +0000 (15:08 -0700)]
staging: comedi: ni_6527: remove unused NI6527_*_SIZE defines
These defines are not used in the driver. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 22:08:10 +0000 (15:08 -0700)]
staging: comedi: ni_6527: remove DRIVER_NAME define
The request_irq() call should be using dev->board_name to better
identify the irq user.
Remove the DRIVER_NAME define and just open code the 'driver_name' in
the comedi_driver and the 'name' in the pci_driver declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:55:33 +0000 (17:55 -0700)]
staging: comedi: ni_at_ao: fix board names
This driver works with "at-ao-6/10" boards not "ai-ao-6/10" boards.
Fix the names in the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:55:14 +0000 (17:55 -0700)]
staging: comedi: ni_at_ao: change MODULE_DESCRIPTION
Change the MODULE_DESCRIPTION to something useful instead of the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:54:58 +0000 (17:54 -0700)]
staging: comedi: ni_at_ao: tidy up multi-line comments
Cleanup the multi-line comments to follow the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:54:42 +0000 (17:54 -0700)]
staging: comedi: ni_at_ao: tidy up atao_attach()
For aesthetics, add some whitespace to the subdevice init.
Remove the printk noise at the end of the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:54:25 +0000 (17:54 -0700)]
staging: comedi: ni_at_ao: tidy up atao_ao_rinsn()
For aesthetics, rename this function to help with greps.
Tidy up this function to follow the normal format for analog
output read back functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:54:08 +0000 (17:54 -0700)]
staging: comedi: ni_at_ao: tidy up atao_ao_winsn()
For aesthetics, rename this function to help with greps.
For channel 0, register group 1 only needs to be selected before
writing the values and restored to group 0 when the writes are
finished. Move the code out of the for () loop.
Use the comedi_ffset_munge() helper to handle the offset binary to
two's complement munging.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:53:50 +0000 (17:53 -0700)]
staging: comedi: ni_at_ao: introduce atao_select_reg_group()
To clarify the code a bit, introduce a helper function to set/clear
the GRP2WR bit in the CFG1 register. This bit selects which group of
registers are used for the registers that share the same I/O addresses.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:53:31 +0000 (17:53 -0700)]
staging: comedi: ni_at_ao: move the atao_reset() function
For aesthetics, move this function closer to it's only caller.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:53:11 +0000 (17:53 -0700)]
staging: comedi: ni_at_ao: move the boardinfo declaration
For aesthetics, move the boardinfo declaration closer to the struct
definition. Also, remove the cut-and-paste skel driver comment.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:52:53 +0000 (17:52 -0700)]
staging: comedi: ni_at_ao: rename the rest of the register map
For aesthetics, rename the remaining register map defines so they
follow the same format as the ones already renamed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:52:32 +0000 (17:52 -0700)]
staging: comedi: ni_at_ao: use 8253.h helpers
To better document the code, use the 8254.h helpers to set the
timers instead of doing the outb() instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:52:13 +0000 (17:52 -0700)]
staging: comedi: ni_at_ao: tidy up the CFG3 register defines
Rename the defines for the CFG3 register so they have namespace
associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:51:54 +0000 (17:51 -0700)]
staging: comedi: ni_at_ao: tidy up the calibration subdevice
The AT-AO-6/10 boards use
DAC8800 TrimDACs to software calibrate the
analog output channels. These are exposed to the user as a calibration
subdevice.
Tidy up, and document, the calibration subdevice.
Since the TrimDACs are not readable, store the calibration values in the
private data for the user to read back as needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:51:35 +0000 (17:51 -0700)]
staging: comedi: ni_at_ao: remove 'cfg2' from private data
This member of the private data is initialized to '0' during the
board reset then never changed. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:51:16 +0000 (17:51 -0700)]
staging: comedi: ni_at_ao: tidy up the STATUS register defines
Rename the defines for the STATUS register so they have namespace
associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:50:49 +0000 (17:50 -0700)]
staging: comedi: ni_at_ao: tidy up CFG1 register defines
Rename the defines for the CFG1 register so they have namespace
associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:50:30 +0000 (17:50 -0700)]
staging: comedi: ni_at_ao: tidy up digital i/o register defines
The digital in and digital out registers on this board share the same
address. They also effect the same digital i/o pins. To make this clear
combine the two defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:50:09 +0000 (17:50 -0700)]
staging: comedi: ni_at_ao: tidy up the register map defines
For aesthetics, sort the register map defines so the normal registers
are listed first and then alternate registers (when the GRP2WR bit is
set).
Convert the register bit defines into bit shifts to make them clear.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 1 Oct 2013 00:49:36 +0000 (17:49 -0700)]
staging: comedi: ni_at_ao: remove ATAO_SIZE define
This define is only used during the board attach to specify the
I/O region length. Remove the define and just open code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 1 Oct 2013 15:07:25 +0000 (16:07 +0100)]
staging: vt6656: rxtx.c remove dead code s_uFillDataHead/pvTxDataHd.
uFillDataHead in is now dead so remove and pvTxDataHd.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 1 Oct 2013 15:03:40 +0000 (16:03 +0100)]
staging: vt6656: rxtx.c add no rts struct vnt_tx_datahead_ab
Add no rts/cts vnt_tx_datahead_ab to union vnt_tx_data_head.
The need_mic now applies to all modes of packet type PK_TYPE_11B.
and return vnt_rxtx_datahead_ab in s_vGenerateTxParameter
This removes pvTxDataHd pointer assignment and calls to s_uFillDataHead.
Since pvTxDataHd is now null a small vendor hack to vDMA0_tx_80211/csMgmt_xmit
to do with Disassociation-packet is also changed correct head position.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 1 Oct 2013 15:00:20 +0000 (16:00 +0100)]
staging: vt6656: rxtx.c parse out vnt_rxtx_datahead_ab
Parse struct vnt_tx_datahead_ab from s_uFillDataHead and
move to struct vnt_rts_ab structure returning duration down
functions.
Both are returned in s_uFillDataHead at this stage as pvTxDataHd
is only null in s_bPacketToWirelessUsb.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 1 Oct 2013 14:58:54 +0000 (15:58 +0100)]
staging: vt6656: rxtx.c add no rts struct vnt_tx_datahead_a_fb
Add no rts/cts vnt_tx_datahead_a_fb to union vnt_tx_data_head.
The need_mic now applies to all modes of packet type PK_TYPE_11A.
and return vnt_rxtx_datahead_a_fb in s_vGenerateTxParameter
This removes pvTxDataHd pointer assignment.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 1 Oct 2013 14:56:48 +0000 (15:56 +0100)]
staging: vt6656: rxtx.c parse out struct vnt_tx_datahead_a_fb
Parse struct vnt_tx_datahead_a_fb from s_uFillDataHead and
move to struct vnt_rts_a_fb structure returning duration down
functions.
This removes pvTxDataHd pointer assignment.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 1 Oct 2013 14:54:56 +0000 (15:54 +0100)]
staging: vt6656: rxtx.c Parse struct vnt_tx_datahead_g_fb
Parse struct vnt_tx_datahead_g_fb from s_uFillDataHead and
move to struct vnt_rts_g_fb/struct vnt_cts_fb structure returning
duration down functions.
This removes pvTxDataHd pointer assignment.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 1 Oct 2013 14:52:16 +0000 (15:52 +0100)]
staging: vt6656: rxtx.c Parse struct vnt_tx_datahead_g
Parse struct vnt_tx_datahead_g from s_uFillDataHead and
move to struct vnt_rts_g/struct vnt_cts structure.
This removes pvTxDataHd pointer assignment.
The duration_id(uDuration) field is now returned in s_vGenerateTxParameter.
The return of s_uFillDataHead temporary or'ed to retain functionality of
other functions and is removed at the end of this patch series.
Since pvTxDataHd is now null a small vendor hack to vDMA0_tx_80211/csMgmt_xmit
to do with Disassociation-packet is also changed correct head position.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 1 Oct 2013 14:50:24 +0000 (15:50 +0100)]
staging: vt6656: rxtx.c change tx functions to return u16
s_vGenerateTxParameter, s_vFillCTSHead, s_vFillRTSHead, vnt_rxtx_rts* functions
to return u16
Initially this is the duration_id field for ieee80211_hdr
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kamlakant Patel [Tue, 1 Oct 2013 09:33:58 +0000 (15:03 +0530)]
Staging: MTD: Micron SPINAND Driver support
This patch adds support for Micron SPINAND via MTD.
Signed-off-by: Mona Anonuevo <manonuevo@micron.com>
Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Cort [Tue, 1 Oct 2013 15:26:55 +0000 (11:26 -0400)]
Staging: rtl8712: fix spaces before semicolons
Resolve all of the 'WARNING: space prohibited before semicolon'
checkpatch warnings for rtl8712.
Signed-off-by: Thomas Cort <linuxgeek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthijs Kooijman [Thu, 3 Oct 2013 07:46:25 +0000 (09:46 +0200)]
staging: dwc2: Make dwc2_hw_params.host_channels large enough
The hardware offers a 4-bit register containing the number of host
channels. However, the values of these register mean 1-16 host channels,
not 0-15. Since the dwc2_hw_params struct stores the actual number of
host channels supported instead of the raw register value, it should be
5 bits wide instead of 4.
Before this commit, hardware with 16 host channels would overflow the
field, making it appear as 0 channels.
This bug was introduced in commit
9badec2 (staging: dwc2: interpret all
hwcfg and related register at init time).
Reported-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shalin Mehta [Thu, 3 Oct 2013 08:08:42 +0000 (01:08 -0700)]
staging: speakup: str initialization replaced with NULL where it was initialized with int
Fixed warnings in all of three files where the string was initilized with an integer instead of NULL
Signed-off-by: Shalin Mehta <shalinmehta85@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:20 +0000 (23:43 +0300)]
staging: octeon-usb: cvmx-usb.h: make comments to fit into 80 columns
Make comments to fit into 80 columns.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:19 +0000 (23:43 +0300)]
staging: octeon-usb: cvmx-usb.c: make comments to fit into 80 columns
Make comments to fit into 80 columns.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:18 +0000 (23:43 +0300)]
staging: octeon-usb: cvmx-usb: delete unused macros
Delete unused cvmx_read_csr / cvmx_write_csr macros.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:17 +0000 (23:43 +0300)]
staging: octeon-usb: eliminate CVMX_PREFETCH_PREFX
Eliminate CVMX_PREFETCH_PREFX.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:16 +0000 (23:43 +0300)]
staging: octeon-usb: eliminate CVMX_PREFETCH_PREF0
Eliminate CVMX_PREFETCH_PREF0.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:15 +0000 (23:43 +0300)]
staging: octeon-usb: delete CVMX_PREFETCH128
Delete unused macro.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:14 +0000 (23:43 +0300)]
staging: octeon-usb: inline CVMX_PREFETCH0
Inline CVMX_PREFETCH0 macro.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:13 +0000 (23:43 +0300)]
staging: octeon-usb: replace CVMX_CLZ with __fls()
Replace CVMX_CLZ macro with __fls().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:12 +0000 (23:43 +0300)]
staging: octeon-usb: delete redundant flags from cvmx_usb_open_pipe()
Delete redudant flags parameter.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:11 +0000 (23:43 +0300)]
staging: octeon-usb: delete redundant flags from __cvmx_usb_submit_transaction()
Delete redundant flags parameter.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:10 +0000 (23:43 +0300)]
staging: octeon-usb: delete cvmx_usb_isochronous_flags
Delete unused flags.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 1 Oct 2013 20:43:09 +0000 (23:43 +0300)]
staging: octeon-usb: delete redundant flags from cvmx_usb_initialize()
The function will always figure out the used clock internally, so delete
a redudant parameter and the flag.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tugce Sirin [Wed, 2 Oct 2013 22:39:57 +0000 (01:39 +0300)]
staging: silicom: fix space prohibited before semicolon
Signed-off-by: Tugce Sirin <ztugcesirin@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tugce Sirin [Wed, 2 Oct 2013 17:04:31 +0000 (20:04 +0300)]
staging: nvec: fix space after if statement in nvec.c
This patch fixes space after if statement in nvec/nvec.c
Signed-off-by: Tugce Sirin <ztugcesirin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 1 Oct 2013 03:46:36 +0000 (20:46 -0700)]
staging: lustre: fix bug with LL_MRF_RETURN in loop_make_request
Turns out that LL_MRF_RETURN is "void" so loop_make_request() would fall
through to the error path for a successful call. Either this never
matters, or the error path really doesn't do anything.
Fix it up to do what the code is written to look like it is doing, if
that really is what it should be doing is another story...
Cc: Peng Tao <tao.peng@emc.com>
Cc: Zhao Hongjiang <zhaohongjiang@huawei.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 1 Oct 2013 03:14:42 +0000 (20:14 -0700)]
staging: lustre: remove ll_mrf_ret
It's just 'void' and only used in one place, so just remove it, it's
useless.
Cc: Peng Tao <tao.peng@emc.com>
Cc: Zhao Hongjiang <zhaohongjiang@huawei.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:38 +0000 (09:36 +0530)]
staging: cxt1e1: linux.c: Return negative error codes
Return negative error codes as is followed in the rest of the
kernel.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:37 +0000 (09:36 +0530)]
staging: cxt1e1: hwprobe.c: Return negative error codes
Return negative error codes as is followed in the rest of the
kernel.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:36 +0000 (09:36 +0530)]
staging: cxt1e1: musycc.c: Return negative error codes
Return negative error codes as is followed in the rest of the
kernel.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:35 +0000 (09:36 +0530)]
staging: cxt1e1: pmcc4_drv.c: Use NULL instead of 0
Pointers should be assigned NULL instead of 0.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:34 +0000 (09:36 +0530)]
staging: cxt1e1: sbecrc.c: Use NULL instead of 0
Pointers should be assigned NULL instead of 0.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:33 +0000 (09:36 +0530)]
staging: cxt1e1: hwprobe.c: Use NULL instead of 0
Pointers should be assigned NULL instead of 0.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:32 +0000 (09:36 +0530)]
staging: cxt1e1: sbeproc.c: Use NULL instead of 0
Pointers should be assigned NULL instead of 0.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:31 +0000 (09:36 +0530)]
staging: cxt1e1: linux.c: Use NULL instead of 0
Pointers should be assigned NULL instead of 0.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:30 +0000 (09:36 +0530)]
staging: cxt1e1: sbeid.c: Use NULL instead of 0
Pointers should be assigned NULL instead of 0.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:29 +0000 (09:36 +0530)]
staging: cxt1e1: sbecom_inline_linux.h: Return NULL instead of 0
Functions returning pointer should return NULL instead of 0.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 04:06:28 +0000 (09:36 +0530)]
staging: cxt1e1: musycc.c: Use NULL instead of 0
Pointers should be assigned NULL instead of 0.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Fri, 27 Sep 2013 09:50:26 +0000 (15:20 +0530)]
staging: dgnc: Remove KERNEL_VERSION check
This check is not required.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sachin Kamat [Sat, 28 Sep 2013 10:22:30 +0000 (15:52 +0530)]
staging: imx-drm: Remove redundant of_match_ptr
'imx_ldb_dt_ids' is always compiled in. Hence of_match_ptr() is
not needed.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Berglund [Fri, 27 Sep 2013 16:32:26 +0000 (18:32 +0200)]
Staging: sm7xxfb: fixed line break coding style issues
Fixed coding style issues.
Signed-off-by: Martin Berglund <martin@rogsta.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Sat, 28 Sep 2013 00:12:59 +0000 (17:12 -0700)]
staging/olpc: fix dependencies to fix build errors
Fix build errors when GPIO_CS5535=m and FB_OLPC_DCON=y
by preventing that kconfig combination.
These build errors are caused by having a kconfig bool symbol
(FB_OLPC_DCON_1) that depend on a tristate symbol (GPIO_CS5535),
but when the tristate symbol is =m, the bool symbol is =y.
drivers/built-in.o: In function `dcon_read_status_xo_1':
olpc_dcon_xo_1.c:(.text+0x359531): undefined reference to `cs5535_gpio_set'
drivers/built-in.o: In function `dcon_wiggle_xo_1':
olpc_dcon_xo_1.c:(.text+0x35959f): undefined reference to `cs5535_gpio_set'
olpc_dcon_xo_1.c:(.text+0x359610): undefined reference to `cs5535_gpio_clear'
drivers/built-in.o:olpc_dcon_xo_1.c:(.text+0x3596a1): more undefined references to `cs5535_gpio_clear' follow
drivers/built-in.o: In function `dcon_wiggle_xo_1':
olpc_dcon_xo_1.c:(.text+0x359708): undefined reference to `cs5535_gpio_set'
drivers/built-in.o: In function `dcon_init_xo_1':
olpc_dcon_xo_1.c:(.text+0x35989b): undefined reference to `cs5535_gpio_clear'
olpc_dcon_xo_1.c:(.text+0x3598b5): undefined reference to `cs5535_gpio_isset'
olpc_dcon_xo_1.c:(.text+0x359963): undefined reference to `cs5535_gpio_setup_event'
olpc_dcon_xo_1.c:(.text+0x359980): undefined reference to `cs5535_gpio_set_irq'
olpc_dcon_xo_1.c:(.text+0x359a36): undefined reference to `cs5535_gpio_set'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Sat, 28 Sep 2013 09:58:33 +0000 (12:58 +0300)]
staging: rtl8712: remove unneeded NULL check
We knew "peventbuf" was a valid pointer and "peventbuf + 2" is also
non-NULL. I have removed the check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adam Rall [Mon, 30 Sep 2013 00:11:14 +0000 (20:11 -0400)]
Staging: rtl8187se: fixed coding style issues
Fixed checkpatch.pl errors in r8180_dm.c.
Signed-off-by: Adam Rall <adam.rall4@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Mon, 30 Sep 2013 20:22:11 +0000 (22:22 +0200)]
staging: vt6655: don't leak when returning -EOPNOTSUPP in vt6655_hostap_ioctl
Make sure we always free(param); and remove a redundant "goto out;"
just before we'll hit the label anyway.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Berglund [Sat, 28 Sep 2013 19:03:24 +0000 (21:03 +0200)]
Staging: vt6655: 80211mgr: Cleanup of brace coding style issues
Cleanup of a few brace coding style issues.
Signed-off-by: Martin Berglund <martin@rogsta.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Fri, 27 Sep 2013 15:55:45 +0000 (16:55 +0100)]
staging: vt6656: covert RXvMngWorkItem to work queue
Tasklet to workqueue.
RxMngWorkItem -> rx_mng_work_item
Reduce atomic area of driver and dependency on system timer.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Fri, 27 Sep 2013 15:53:55 +0000 (16:53 +0100)]
staging: vt6656: convert RXvWorkItem to work queue
Tasklet to workqueue.
ReadWorkItem -> read_work_item
Reduce atomic area of driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Fri, 27 Sep 2013 15:51:13 +0000 (16:51 +0100)]
staging: vt6656: covert BSSvSecondCallBack to delayed_work.
timer to delay workqueue.
sTimerSecondCallback -> second_callback_work
The delayed work queue is declared in device.h
This timer is very heavy on the system.
Improves over performance of driver and reduce the atomic
area of driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Fri, 27 Sep 2013 15:48:14 +0000 (16:48 +0100)]
staging: vt6656: device.h convert sTimerCommand to delayed_work
timer to delay workqueue.
sTimerCommand -> run_command_work
sTimerCommand is very heavy on the system timer.
Improves over performance of driver and reduce the atomic
area of driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Mon, 30 Sep 2013 20:44:37 +0000 (22:44 +0200)]
staging: lustre: Don't leak 'buffer' in cfs_get_environ()
If 'down_read_trylock' fails we'll curently leak the memory allocated to 'buffer'.
Fix the leak by simply kfree'ing 'buffer' before returning '-EDEADLK'.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 30 Sep 2013 16:26:38 +0000 (09:26 -0700)]
staging: comedi: ni_at_ao: fix namespace clash of 'RSI' define
As pointed out by Fengguang Wu, the RSI define in this driver clashes
with the one in arch/x86/include/uapi/asm/ptrace-abi.h.
This define isn't currently used by the driver so just rename it to fix
the clash.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 30 Sep 2013 01:42:21 +0000 (18:42 -0700)]
Merge 3.12-rc3 into staging-next
We want the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 29 Sep 2013 22:02:38 +0000 (15:02 -0700)]
Linux 3.12-rc3
Linus Torvalds [Sun, 29 Sep 2013 20:47:35 +0000 (13:47 -0700)]
Merge tag 'usb-3.12-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB driver fixes for 3.12-rc3.
These are all for host controller issues that have been reported, and
there's a fix for an annoying error message that gets printed every
time you remove a USB 3 device from the system that's been bugging me
for a while"
* tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: add support for Merrifield
USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization
USB: Fix breakage in ffs_fs_mount()
fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy
usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit
usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA
usb: chipidea: udc: free pending TD at removal procedure
usb: chipidea: imx: Add usb_phy_shutdown at probe's error path
usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal
usb: chipidea: udc: fix the oops after rmmod gadget
USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd
USB: OHCI: accept very late isochronous URBs
USB: UHCI: accept very late isochronous URBs
USB: iMX21: accept very late isochronous URBs
usbcore: check usb device's state before sending a Set SEL control transfer
xhci: Fix race between ep halt and URB cancellation
usb: Fix xHCI host issues on remote wakeup.
xhci: Ensure a command structure points to the correct trb on the command ring
xhci: Fix oops happening after address device timeout
Linus Torvalds [Sun, 29 Sep 2013 20:47:00 +0000 (13:47 -0700)]
Merge tag 'tty-3.12-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some serial at tty driver fixes for 3.12-rc3
The serial driver fixes some kref leaks, documentation is moved to the
proper places, and the tty and n_tty fixes resolve some reported
regressions. There is still one outstanding tty regression fix that
isn't in here yet, as I want to test it out some more, it will be sent
for 3.12-rc4 if it checks out"
* tag 'tty-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: ar933x_uart: move devicetree binding documentation
tty: Fix SIGTTOU not sent with tcflush()
n_tty: Fix EOF push index when termios changes
serial: pch_uart: remove unnecessary tty_port_tty_get
serial: pch_uart: fix tty-kref leak in dma-rx path
serial: pch_uart: fix tty-kref leak in rx-error path
serial: tegra: fix tty-kref leak
Linus Torvalds [Sun, 29 Sep 2013 20:46:18 +0000 (13:46 -0700)]
Merge tag 'staging-3.12-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some staging driver fixes, MAINTAINER updates, and a new
device id. All of these have been in the linux-next tree, and are
pretty simple patches"
* tag 'staging-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Add new device ID
staging: imx-drm: Fix probe failure
staging: vt6656: [BUG] iwctl_siwencodeext return if device not open
staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier.
staging: vt6656: rxtx.c [BUG] s_vGetFreeContext dead lock on null apTD.
Staging: rtl8192u: r819xU_cmdpkt: checking NULL value after doing dev_alloc_skb
staging: usbip: Orphan usbip
staging: r8188eu: Add files for new drive: Cocci spatch "noderef"
staging: r8188eu: Cocci spatch "noderef"
staging: octeon-usb: Cocci spatch "noderef"
staging: r8188eu: Add files for new drive: Cocci spatch "noderef"
MAINTAINERS: staging: dgnc and dgap drivers: add maintainer
staging: lustre: Cocci spatch "noderef"
Linus Torvalds [Sun, 29 Sep 2013 20:45:23 +0000 (13:45 -0700)]
Merge tag 'driver-core-3.12-rc3' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core / sysfs fixes from Greg KH:
"Here are 2 fixes for 3.12-rc3. One fixes a sysfs problem with
mounting caused by 3.12-rc1, and the other is a bug reported by the
chromeos developers with the driver core.
Both have been in linux-next for a bit"
* tag 'driver-core-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core : Fix use after free of dev->parent in device_shutdown
sysfs: Allow mounting without CONFIG_NET
Linus Torvalds [Sun, 29 Sep 2013 20:44:48 +0000 (13:44 -0700)]
Merge tag 'char-misc-3.12-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some HyperV and MEI driver fixes for 3.12-rc3. They resolve
some issues that people have been reporting for them"
* tag 'char-misc-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: vmbus: Terminate vmbus version negotiation on timeout
Drivers: hv: util: Correctly support ws2008R2 and earlier
mei: cancel stall timers in mei_reset
mei: bus: stop wait for read during cl state transition
mei: make me client counters less error prone
Greg Kroah-Hartman [Sun, 29 Sep 2013 20:12:23 +0000 (13:12 -0700)]
Merge tag 'iio-for-3.13b' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new functionality for IIO in the 3.13 cycle - with bug fixes for first set.
This is a small, mainly to get a couple of compile bug related fixes into
the tree ASAP.
New device support:
1) Add ad5446 dac support to the ad5641 driver.
New functionality and cleanups:
1) Optional power supply regulators for the st pressure sensors drivers using
the new optional regulator interface.
2) Bit of tidying up of naming in the sysfs trigger.
Bug fixes from the previous series:
1) Missing select IIO_BUFFER for ti_am335x_adc
2) Drop a bonus bracket in iio-trig-bfin-timmer
This page took 0.045236 seconds and 5 git commands to generate.