Lee Jones [Wed, 18 Sep 2013 13:53:46 +0000 (14:53 +0100)]
ARM: ux500: Remove ATAG booting support for MOP500
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:53:06 +0000 (14:53 +0100)]
ARM: ux500: Purge UIB framework when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:56:47 +0000 (09:56 +0100)]
ARM: ux500: Take out STUIB support when not booting with Device Tree
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:52:12 +0000 (09:52 +0100)]
ARM: ux500: Remove BU21013 ROHM TS support when booting with only ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:39:05 +0000 (09:39 +0100)]
ARM: ux500: Don't register the STMPE/SKE when booting with ATAG support
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:34:42 +0000 (09:34 +0100)]
ARM: ux500: Delete U8500 UIB support when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:24:38 +0000 (09:24 +0100)]
ARM: ux500: Don't register Synaptics RMI4 TS when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:19:01 +0000 (09:19 +0100)]
ARM: ux500: Purge DB8500 PRCMU registration when not booting with DT
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 14:52:30 +0000 (15:52 +0100)]
ARM: ux500: Stop requesting the SoC device to play 'parent' role
There are no more devices which require left to register which require
a parent. This is part of the ux500 conversion over to Device Tree only
booting.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 15:18:56 +0000 (16:18 +0100)]
ARM: ux500: Remove UART support when booting without Device Tree
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 14:41:30 +0000 (15:41 +0100)]
ARM: ux500: Stop initialising the pinmaps when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 13:58:29 +0000 (14:58 +0100)]
ARM: ux500: Rip out SSP/SPI registration when not booting with Device Tree
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 12:28:12 +0000 (13:28 +0100)]
ARM: ux500: Do not register the PMU device if booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:50:59 +0000 (14:50 +0100)]
ARM: ux500: Deactivate enablement of DMA40 during ATAG booting
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:49:52 +0000 (14:49 +0100)]
ARM: ux500: Stop enabling GPIOs when not booting with Device Tree
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 09:29:22 +0000 (10:29 +0100)]
ARM: ux500: Stop registering Pinctrl when booting with ATAG support
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 13:54:30 +0000 (14:54 +0100)]
ARM: ux500: Purge support for registering the RTC when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:48:27 +0000 (14:48 +0100)]
ARM: ux500: Remove USB support when booting using ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 11:10:48 +0000 (12:10 +0100)]
ARM: ux500: Rip out keypad initialisation which is no longer used
This is part of the ux500 conversion over to Device Tree only
booting, but this stuff haven't been used for years.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 16:17:22 +0000 (17:17 +0100)]
ARM: ux500: Purge SDI support for ATAG booting
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 14:59:51 +0000 (15:59 +0100)]
ARM: ux500: Remove I2C support when booting with ATAG support
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 14:54:05 +0000 (15:54 +0100)]
ARM: ux500: Purge SFH7741 Proximity Sensor support when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:41:18 +0000 (14:41 +0100)]
ARM: ux500: Remove Light sensor Rohm BH1780GLI when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 14:11:25 +0000 (15:11 +0100)]
ARM: ux500: Remove TC35892 Flexible IO Expander when booting ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 14:39:53 +0000 (15:39 +0100)]
ARM: ux500: Stop passing GPIO pdata when booitng with ATAGs enabled
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 13:26:18 +0000 (14:26 +0100)]
ARM: ux500: Prevent CODEC platform data from being passed when booting ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:35:06 +0000 (14:35 +0100)]
ARM: ux500: Rip out Hash support when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 14:19:18 +0000 (15:19 +0100)]
ARM: ux500: Deactivate Crypt support when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 13:33:07 +0000 (14:33 +0100)]
ARM: ux500: Purge SDI regulator support when booting with ATAGs enable
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 15:28:58 +0000 (16:28 +0100)]
ARM: ux500: Disable Snowball's CPUFreq functionality when booting with ATAGs enabled
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 15:27:28 +0000 (16:27 +0100)]
ARM: ux500: Remove support for Snowball's Ethernet regulator when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 14:46:25 +0000 (15:46 +0100)]
ARM: ux500: Disable Snowball's SMSC911x Ethernet when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 14:42:17 +0000 (15:42 +0100)]
ARM: ux500: Purge support for Snowball user buttons when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 13:38:44 +0000 (14:38 +0100)]
ARM: ux500: Remove ATAG booting support for Snowball's heatbeat LED
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:32:16 +0000 (14:32 +0100)]
ARM: ux500: Remove ATAG support for LP5521 Programmable Three-Channel LED driver
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:30:37 +0000 (14:30 +0100)]
ARM: ux500: Remove TPS61052 High Power White LED Driver ATAG support
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 13 Aug 2013 16:52:15 +0000 (17:52 +0100)]
ARM: ux500: Remove Audio/MSP support when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 12:38:50 +0000 (13:38 +0100)]
ARM: ux500: Remove SSP AUXDATA pertaining to DMA bindings
These are now cared for from the Device Tree.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 10:32:49 +0000 (11:32 +0100)]
ARM: ux500: Reclassify PRCMU AUXDATA entry
We still need to utilise the AUXDATA system for the PRCMU to pass
through platform data which can not be DT:ed i.e. regulator initialisation
values. All we're doing in this patch is changing the comment header to be
more accurate.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 3 Jun 2013 13:05:57 +0000 (14:05 +0100)]
ARM: ux500: Remove AUXDATA relating to DMA clock-name bindings
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 5 Jun 2013 11:30:38 +0000 (12:30 +0100)]
ARM: ux500: Remove AUXDATA relating to Ethernet clock-name bindings
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 3 Jun 2013 13:04:20 +0000 (14:04 +0100)]
ARM: ux500: Remove AUXDATA relating to USB clock-name bindings
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 6 Jun 2013 11:45:03 +0000 (12:45 +0100)]
ARM: ux500: Remove AUXDATA relating to SDI (MMC) clock-name bindings
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 12:37:12 +0000 (13:37 +0100)]
ARM: ux500: Relocate AUXDATA relating to MSP (Audio)
MSP no longer requires clock-name bindings, so we need to move them to
a more appropriate header indicating that we're still passing DMA
related platform data to them.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 3 Jun 2013 13:01:52 +0000 (14:01 +0100)]
ARM: ux500: Remove AUXDATA relating to I2C clock-name bindings
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 6 Jun 2013 11:38:32 +0000 (12:38 +0100)]
ARM: ux500: Remove AUXDATA relating to UART clock-name bindings
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 5 Jun 2013 11:29:18 +0000 (12:29 +0100)]
ARM: ux500: Remove AUXDATA relating to GPIO clock-name bindings
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 17 Sep 2013 09:41:42 +0000 (10:41 +0100)]
ARM: ux500: Call appropriate clock initialisation based on DT or !DT booting
The ux500 platform will soon be converted to Device Tree only. When that
happens the old clock initialisation will be ripped out. In the meantime
however, we have to make a decision and call the appropriate
initialisation code manually.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 07:58:18 +0000 (08:58 +0100)]
usb: musb: ux500: Don't supply a con_id when requesting the clock
If we supply a con_id then the clock framework will search for that name
in MUSB's Device Tree node for the 'clock-names' property. If it's absent
the clock request will fail. However, if we don't supply the con_id then
clk_get() will call into clk_sys() which will use the device name to
search for the appropriate clock, which is much more natural than forcing
'usb'.
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 17 Sep 2013 09:35:00 +0000 (10:35 +0100)]
clk: ux500: Add Device Tree support for the TWD clock
This patch enables the TWD fixed factor clock to be specified from
Device Tree via phandles to the "smp-twd-clock" node.
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 17 Sep 2013 09:34:24 +0000 (10:34 +0100)]
clk: ux500: Add Device Tree support for the RTC clock
This patch enables the RTC fixed frequency clock to be specified from
Device Tree via phandles to the "rtc32k-clock" node.
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 17 Sep 2013 09:33:05 +0000 (10:33 +0100)]
clk: ux500: Add Device Tree support for the PRCC Kernel clock
This patch enables clocks to be specified from Device Tree via phandles
to the "prcc-kernel-clock" node.
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 17 Sep 2013 09:31:39 +0000 (10:31 +0100)]
clk: ux500: Add Device Tree support for the PRCC Peripheral clock
This patch enables clocks to be specified from Device Tree via phandles
to the "prcc-periph-clock" node.
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 17 Sep 2013 09:30:19 +0000 (10:30 +0100)]
clk: ux500: Add Device Tree support for the PRCMU clock
This patch enables clocks to be specified from Device Tree via phandles
to the "prcmu-clock" node.
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 22 Jul 2013 12:13:01 +0000 (13:13 +0100)]
clk: ux500: Add a 2-cell Device Tree parser for obtaining PRCC clocks
PRCC (peripheral and kernel) clocks are specified using a property tuple
<&phandle base bit>, where 'base' is the peripheral (1, 2, 3, 5 or 6),
and bit is read-in value into that peripheral stipulated by the hardware
specification.
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 17 Sep 2013 09:26:24 +0000 (10:26 +0100)]
clk: ux500: Provide u8500_clk with skeleton Device Tree support
The functional components will be added on a per-clock basis.
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 17 Sep 2013 09:11:53 +0000 (10:11 +0100)]
clk: ux500: Copy u8500_clk_init() ready for DT enablement
Here we're using the old clock initialisation function as a template.
It's necessary to remove all of the clk_register_clkdev() calls as
they don't make sense when booting with Device Tree.
Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 8 Aug 2013 09:38:15 +0000 (10:38 +0100)]
clk: ux500: Remove BML8580 clock
There is no mention of the PRCMU_BML8580CLK in any of the Design
Specifications for the chips supported in Mainline. In fact, where it
is incorrectly used in the u8540 clock definition driver it would
have the side effect of using the incorrect clock management address
([PRCM_BML8580CLK_MGT] 0x108 instead of the correct value 0x04C).
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 07:55:19 +0000 (08:55 +0100)]
ARM: ux500: Don't attempt to enable the Nomadik System Timer twice
When booting with DT enabled we already call clocksource_of_init(),
which in turn calls the OF version of nmdk_timer_init().
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 08:54:07 +0000 (09:54 +0100)]
ARM: ux500: Add a DT node for the Nomadik System Timer (MTU0)
The MTU0 is required for full booting of the system. The driver has
been previously DT:ed and is in use on the Nomadik platform, but we
also need to enable it on ux500 based systems.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 5 Jun 2013 11:26:52 +0000 (12:26 +0100)]
ARM: ux500: Supply the TWD Timer clock lookup to the DBX500 DT
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 6 Jun 2013 09:54:48 +0000 (10:54 +0100)]
ARM: ux500: Add TWD (fixed-factor) clock node to DBx500 Device Tree
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 5 Jun 2013 11:27:24 +0000 (12:27 +0100)]
ARM: ux500: Supply the RTC clock lookup to the DBX500 DT
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 6 Jun 2013 09:54:27 +0000 (10:54 +0100)]
ARM: ux500: Add RTC (fixed-frequency) clock node to DBx500 Device Tree
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 3 Jun 2013 12:18:00 +0000 (13:18 +0100)]
ARM: ux500: Supply the MSP (Audio) clocks lookup to the DBX500 DT
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 6 Jun 2013 11:28:50 +0000 (12:28 +0100)]
ARM: ux500: Supply the SDI (MMC) clocks lookup to the DBX500 DT
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 3 Jun 2013 12:17:17 +0000 (13:17 +0100)]
ARM: ux500: Supply the UART clocks lookup to the DBX500 DT
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 3 Jun 2013 12:15:22 +0000 (13:15 +0100)]
ARM: ux500: Supply the I2C clocks lookup to the DBX500 DT
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 6 Jun 2013 09:52:50 +0000 (10:52 +0100)]
ARM: ux500: Add PRCC Kernel clock node to DBx500 Device Tree
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 3 Jun 2013 12:06:13 +0000 (13:06 +0100)]
ARM: ux500: Supply the Ethernet clock lookup to Snowball's DT
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 3 Jun 2013 12:08:26 +0000 (13:08 +0100)]
ARM: ux500: Supply the USB clock lookup to the DBX500 DT
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 3 Jun 2013 12:07:51 +0000 (13:07 +0100)]
ARM: ux500: Supply the GPIO clocks lookup to the DBX500 DT
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 6 Jun 2013 09:51:04 +0000 (10:51 +0100)]
ARM: ux500: Add PRCC Peripheral clock node to DBx500 Device Tree
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 3 Jun 2013 12:13:54 +0000 (13:13 +0100)]
ARM: ux500: Supply the DMA clock lookup to the DBX500 DT
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 08:53:10 +0000 (09:53 +0100)]
ARM: ux500: Add PRCMU clock node to DBx500 Device Tree
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 11:23:05 +0000 (12:23 +0100)]
mfd: dbx500: Remove any mention of the BML8580CLK
The platform which it pertains to is no longer supported and is actually
causing some confusion in the new common clock implementation. A recent
patch removed its use in the clock driver, let's take out the definitions
too.
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 6 Jun 2013 10:50:47 +0000 (11:50 +0100)]
mfd: dbx500-prcmu: Move PRCMU numerical clock identifiers into DT include file
These are required to request DBx500 PRCMU clocks from Device Tree. The
numbers used are taken directly from the Hardware Specification document.
We're moving them from the DBx500 PRCMU include file into the DT include
directory and referencing them from the former via a #include.
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 6 Jun 2013 10:57:27 +0000 (11:57 +0100)]
mfd: dbx500-prcmu: Correctly reorder PRCMU clock identifiers
... as stipulated by the Hardware Specification document.
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Sebastian Andrzej Siewior [Tue, 20 Aug 2013 16:40:27 +0000 (18:40 +0200)]
dt: dbx5x0: remove mentor,musb binding
The "mentor,musb" binding isn't documented so I was about
to document it.
The node is missing a few properties for configuration like
"multipoint", "dyn_fifo", "num_eps" or "ram_bits". However
I am not sure "missing" is the right word here because some
of those informations might be obtained from the chip itself
but it is not done (yet).
Further the ePARP 2.3.1 says the matching goes from left to
right taking the fist match. Right now there is jus a driver
for "stericsson,db8500-musb" and none for "mentor,musb".
I'm not 100% that it is simply possible to have a generic
since even for DMA we have ifdefs in the driver between
"generic mentor dma" and "ux500 dma" and I mean within musb
and not the dma code.
For that reason (that I am not sure a generic musb binding
is possible and how its binding / required properties will
look like) and the reason that we have here a minor binding
without a driver to look at I suggest to remove that binding.
If the majority of people prefer to keep this binding I'm
curious how the documentation of the binding should look like.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Fri, 16 Aug 2013 11:53:14 +0000 (13:53 +0200)]
ARM: ux500: skip redefined regulator names on v60plus board
These regulator rail names are already set in the
ste-href.dtsi file included by this file, this is just redoing
the naming for no benefit, so delete it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Fri, 16 Aug 2013 11:40:55 +0000 (13:40 +0200)]
ARM: ux500: delete surplus PRCMU regulator defines
The Ux500 boards are layered like this:
ste-snowball.dts includes ste-href.dtsi that includes
ste-dbx500.dtsi.
The dbx500.dtsi defines the PRCMU SoC regulators so the SoC will
probe and you can use ampersand references where need be.
However the HREF common dtsi and these two boards redefine the
same PRCMU SoC regulators with the very same names and properties
for no reason. This is like filling in the same line three
times instead of drawing it once. Just delete the surplus
references and have the PRCMU regulators defines in the SoC
files ste-dbx500.dtsi, this is enough.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 10 Sep 2013 12:49:02 +0000 (13:49 +0100)]
ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes
Turns out that they're actually not required and the driver probes just
fine without them. The ID is incorrect at the moment anyway. They actually
currently specify the stn8815.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Torvalds [Mon, 16 Sep 2013 20:17:51 +0000 (16:17 -0400)]
Linux 3.12-rc1
Linus Torvalds [Mon, 16 Sep 2013 20:10:26 +0000 (16:10 -0400)]
Merge branch 'timers/core' of git://git./linux/kernel/git/tip/tip
Pull timer code update from Thomas Gleixner:
- armada SoC clocksource overhaul with a trivial merge conflict
- Minor improvements to various SoC clocksource drivers
* 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding
clocksource: armada-370-xp: Get reference fixed-clock by name
clocksource: armada-370-xp: Replace WARN_ON with BUG_ON
clocksource: armada-370-xp: Fix device-tree binding
clocksource: armada-370-xp: Introduce new compatibles
clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE
clocksource: armada-370-xp: Simplify TIMER_CTRL register access
clocksource: armada-370-xp: Use BIT()
ARM: timer-sp: Set dynamic irq affinity
ARM: nomadik: add dynamic irq flag to the timer
clocksource: sh_cmt: 32-bit control register support
clocksource: em_sti: Convert to devm_* managed helpers
Linus Torvalds [Mon, 16 Sep 2013 19:39:21 +0000 (15:39 -0400)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"Two minor cifs fixes and a minor documentation cleanup for cifs.txt"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update cifs.txt and remove some outdated infos
cifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache
cifs: Do not take a reference to the page in cifs_readpage_worker()
Linus Torvalds [Mon, 16 Sep 2013 19:37:52 +0000 (15:37 -0400)]
Merge tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi
Pull UBI fixes from Artem Bityutskiy:
"Just a single fastmap fix plus a regression fix"
* tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi:
UBI: Fix invalidate_fastmap()
UBI: Fix PEB leak in wear_leveling_worker()
Linus Torvalds [Mon, 16 Sep 2013 19:36:55 +0000 (15:36 -0400)]
Merge tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifs
Pull ubifs fix from Artem Bityutskiy:
"Just one patch which fixes the power-cut recovery testing mode.
I'll start using a single UBI/UBIFS tree instead of 2 trees from now
on. So in the future you'll get 1 small pull request instead of 2
tiny ones"
* tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifs:
UBIFS: remove invalid warn msg with tst_recovery enabled
Linus Torvalds [Sun, 15 Sep 2013 21:45:52 +0000 (17:45 -0400)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"These are four patches for three construction sites:
- Fix register decoding for the combination of multi-core processors
and multi-threading.
- Two more fixes that are part of the ongoing DECstation resurrection
work. One of these touches a DECstation-only network driver.
- Finally Markos' trivial build fix for the AP/SP support.
(With this applied now all MIPS defconfigs are building again)"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: kernel: vpe: Make vpe_attrs an array of pointers.
MIPS: Fix SMP core calculations when using MT support.
MIPS: DECstation I/O ASIC DMA interrupt handling fix
MIPS: DECstation HRT initialization rearrangement
Linus Torvalds [Sun, 15 Sep 2013 21:42:59 +0000 (17:42 -0400)]
Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86
Pull x86 platform updates from Matthew Garrett:
"Nothing amazing here, almost entirely cleanups and minor bugfixes and
one bit of hardware enablement in the amilo-rfkill driver"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
platform/x86: panasonic-laptop: reuse module_acpi_driver
samsung-laptop: fix config build error
platform: x86: remove unnecessary platform_set_drvdata()
amilo-rfkill: Enable using amilo-rfkill with the FSC Amilo L1310.
wmi: parse_wdg() should return kernel error codes
hp_wmi: Fix unregister order in hp_wmi_rfkill_setup()
platform: replace strict_strto*() with kstrto*()
x86: irst: use module_acpi_driver to simplify the code
x86: smartconnect: use module_acpi_driver to simplify the code
platform samsung-q10: use ACPI instead of direct EC calls
thinkpad_acpi: add the ability setting TPACPI_LED_NONE by quirk
thinkpad_acpi: return -NODEV while operating uninitialized LEDs
Linus Torvalds [Sun, 15 Sep 2013 21:41:30 +0000 (17:41 -0400)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull misc SCSI driver updates from James Bottomley:
"This patch set is a set of driver updates (megaraid_sas, fnic, lpfc,
ufs, hpsa) we also have a couple of bug fixes (sd out of bounds and
ibmvfc error handling) and the first round of esas2r checker fixes and
finally the much anticipated big endian additions for megaraid_sas"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (47 commits)
[SCSI] fnic: fnic Driver Tuneables Exposed through CLI
[SCSI] fnic: Kernel panic while running sh/nosh with max lun cfg
[SCSI] fnic: Hitting BUG_ON(io_req->abts_done) in fnic_rport_exch_reset
[SCSI] fnic: Remove QUEUE_FULL handling code
[SCSI] fnic: On system with >1.1TB RAM, VIC fails multipath after boot up
[SCSI] fnic: FC stat param seconds_since_last_reset not getting updated
[SCSI] sd: Fix potential out-of-bounds access
[SCSI] lpfc 8.3.42: Update lpfc version to driver version 8.3.42
[SCSI] lpfc 8.3.42: Fixed issue of task management commands having a fixed timeout
[SCSI] lpfc 8.3.42: Fixed inconsistent spin lock usage.
[SCSI] lpfc 8.3.42: Fix driver's abort loop functionality to skip IOs already getting aborted
[SCSI] lpfc 8.3.42: Fixed failure to allocate SCSI buffer on PPC64 platform for SLI4 devices
[SCSI] lpfc 8.3.42: Fix WARN_ON when driver unloads
[SCSI] lpfc 8.3.42: Avoided making pci bar ioremap call during dual-chute WQ/RQ pci bar selection
[SCSI] lpfc 8.3.42: Fixed driver iocbq structure's iocb_flag field running out of space
[SCSI] lpfc 8.3.42: Fix crash on driver load due to cpu affinity logic
[SCSI] lpfc 8.3.42: Fixed logging format of setting driver sysfs attributes hard to interpret
[SCSI] lpfc 8.3.42: Fixed back to back RSCNs discovery failure.
[SCSI] lpfc 8.3.42: Fixed race condition between BSG I/O dispatch and timeout handling
[SCSI] lpfc 8.3.42: Fixed function mode field defined too small for not recognizing dual-chute mode
...
Linus Torvalds [Sun, 15 Sep 2013 11:15:06 +0000 (07:15 -0400)]
Merge branch 'slab/next' of git://git./linux/kernel/git/penberg/linux
Pull SLAB update from Pekka Enberg:
"Nothing terribly exciting here apart from Christoph's kmalloc
unification patches that brings sl[aou]b implementations closer to
each other"
* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
slab: Use correct GFP_DMA constant
slub: remove verify_mem_not_deleted()
mm/sl[aou]b: Move kmallocXXX functions to common code
mm, slab_common: add 'unlikely' to size check of kmalloc_slab()
mm/slub.c: beautify code for removing redundancy 'break' statement.
slub: Remove unnecessary page NULL check
slub: don't use cpu partial pages on UP
mm/slub: beautify code for 80 column limitation and tab alignment
mm/slub: remove 'per_cpu' which is useless variable
Linus Torvalds [Sun, 15 Sep 2013 11:13:39 +0000 (07:13 -0400)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input update from Dmitry Torokhov:
"The only change is David Hermann's new EVIOCREVOKE evdev ioctl that
allows safely passing file descriptors to input devices to session
processes and later being able to stop delivery of events through
these fds so that inactive sessions will no longer receive user input
that does not belong to them"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: evdev - add EVIOCREVOKE ioctl
Linus Torvalds [Sun, 15 Sep 2013 11:11:01 +0000 (07:11 -0400)]
vfs: fix typo in comment in recent dentry work
Sedat points out that I transposed some letters in "LRU" and wrote "RLU"
instead in one of the new comments explaining the flow. Let's just fix
it.
Reported-by: Sedat Dilek <sedat.dilek@jpberlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Fri, 13 Sep 2013 22:02:22 +0000 (15:02 -0700)]
partitions/efi: loosen check fot pmbr size in lba
Matt found that commit
27a7c642174e ("partitions/efi: account for pmbr
size in lba") caused his GPT formatted eMMC device not to boot. The
reason is that this commit enforced Linux to always check the lesser of
the whole disk or 2Tib for the pMBR size in LBA. While most disk
partitioning tools out there create a pMBR with these characteristics,
Microsoft does not, as it always sets the entry to the maximum 32-bit
limitation - even though a drive may be smaller than that[1].
Loosen this check and only verify that the size is either the whole disk
or 0xFFFFFFFF. No tool in its right mind would set it to any value
other than these.
[1] http://thestarman.pcministry.com/asm/mbr/GPT.htm#GPTPT
Reported-and-tested-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 14 Sep 2013 03:06:40 +0000 (23:06 -0400)]
Merge tag 'writeback-fixes' of git://git./linux/kernel/git/wfg/linux
Pull writeback fix from Wu Fengguang:
"A trivial writeback fix"
* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Do not sort b_io list only because of block device inode
Linus Torvalds [Sat, 14 Sep 2013 02:55:10 +0000 (22:55 -0400)]
vfs: fix dentry LRU list handling and nr_dentry_unused accounting
The LRU list changes interacted badly with our nr_dentry_unused
accounting, and even worse with the new DCACHE_LRU_LIST bit logic.
This introduces helper functions to make sure everything follows the
proper dcache d_lru list rules: the dentry cache is complicated by the
fact that some of the hotpaths don't even want to look at the LRU list
at all, and the fact that we use the same list entry in the dentry for
both the LRU list and for our temporary shrinking lists when removing
things from the LRU.
The helper functions temporarily have some extra sanity checking for the
flag bits that have to match the current LRU state of the dentry. We'll
remove that before the final 3.12 release, but considering how easy it
is to get wrong, this first cleanup version has some very particular
sanity checking.
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Björn Jacke [Tue, 10 Sep 2013 08:28:38 +0000 (10:28 +0200)]
cifs: update cifs.txt and remove some outdated infos
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Björn JACKE <bj@sernet.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Sachin Prabhu [Fri, 13 Sep 2013 13:11:57 +0000 (14:11 +0100)]
cifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache
When reading a single page with cifs_readpage(), we make a call to
fscache_read_or_alloc_page() which once done, asynchronously calls
the completion function cifs_readpage_from_fscache_complete(). This
completion function unlocks the page once it has been populated from
cache. The module then attempts to unlock the page a second time in
cifs_readpage() which leads to warning messages.
In case of a successful call to fscache_read_or_alloc_page() we should skip
the second unlock_page() since this will be called by the
cifs_readpage_from_fscache_complete() once the page has been populated by
fscache.
With the modifications to cifs_readpage_worker(), we will need to re-grab the
page lock in cifs_write_begin().
The problem was first noticed when testing new fscache patches for cifs.
https://bugzilla.redhat.com/show_bug.cgi?id=
1005737
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Sachin Prabhu [Fri, 13 Sep 2013 13:11:56 +0000 (14:11 +0100)]
cifs: Do not take a reference to the page in cifs_readpage_worker()
We do not need to take a reference to the pagecache in
cifs_readpage_worker() since the calling function will have already
taken one before passing the pointer to the page as an argument to the
function.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Linus Torvalds [Fri, 13 Sep 2013 17:58:41 +0000 (10:58 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Some more low risk cleanup patches:
- Remove unnecessary pci_set_drvdata in k10temp driver from Jingoo Han
- Fix return values in several drivers from Sachin Kamat
- Remove redundant break in amc6821 driver from Sachin Kamat"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (k10temp) remove unnecessary pci_set_drvdata()
hwmon: (tmp421) Fix return value
hwmon: (amc6821) Remove redundant break
hwmon: (amc6821) Fix return value
hwmon: (ibmaem) Fix return value
hwmon: (emc2103) Fix return value
This page took 0.044341 seconds and 5 git commands to generate.