[PATCH] RTC: handle sysfs errors

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: handle sysfs errors

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] I2O: more error checking

i2o_scsi: handle sysfs failure

i2o_device:
 * convert i2o_device_add() to return integer error code
   rather than pointer.  Fortunately -nobody- checks the return code of
   this function, so changing has nil impact.
 * handle errors thrown by device_register()

More work in i2o_device remains.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] /proc/kallsyms reports lower-case types for some non-exported symbols

This patch addresses incorrect symbol type information reported through
/proc/kallsyms.  A lowercase character should designate the symbol as local
(or non-exported).  An uppercase character should designate the symbol as
global (or external).

Without this patch, some non-exported symbols are incorrectly assigned an
upper-case designation in /proc/kallsyms.  This patch corrects this
condition by converting non-exported symbols types to lower case when
appropriate and eliminates the superfluous upcase_if_global function

Signed-off-by: Adam B. Jerome <abj@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext4: fsid for statvfs

Update ext4_statfs to return an FSID that is a 64 bit XOR of the 128 bit
filesystem UUID as suggested by Andreas Dilger.  See the following Bugzilla
entry for details:

  http://bugzilla.kernel.org/show_bug.cgi?id=136

Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext3: fsid for statvfs

Update ext3_statfs to return an FSID that is a 64 bit XOR of the 128 bit
filesystem UUID as suggested by Andreas Dilger.  See the following Bugzilla
entry for details:

  http://bugzilla.kernel.org/show_bug.cgi?id=136

Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext2: fsid for statvfs

Update ext2_statfs to return an FSID that is a 64 bit XOR of the 128 bit
filesystem UUID as suggested by Andreas Dilger.  See the following Bugzilla
entry for details:

  http://bugzilla.kernel.org/show_bug.cgi?id=136

Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] honour MNT_NOEXEC for access()

Make access(X_OK) take the "noexec" mount option into account.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] lockdep: annotate nfs/nfsd in-kernel sockets

Stick NFS sockets in their own class to avoid some lockdep warnings.  NFS
sockets are never exposed to user-space, and will hence not trigger certain
code paths that would otherwise pose deadlock scenarios.

[akpm@osdl.org: cleanups]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Dickson <SteveD@redhat.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Acked-by: Neil Brown <neilb@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
[ Fixed patch corruption by quilt, pointed out by Peter Zijlstra ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sound/oss/btaudio.c: ioremap balanced with iounmap

ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/char/istallion.c

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/char/moxa.c

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/char/rio/rio_linux.c

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] serial uartlite driver

Add a driver for the Xilinx uartlite serial controller used in boards with
the PPC405 core in the Xilinx V2P/V4 fpgas.

The hardware is very simple (baudrate/start/stopbits fixed and no break
support).  See the datasheet for details:

http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf

See http://thread.gmane.org/gmane.linux.serial/1237/ for the email thread.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix check_partition routines

check_partition() stops its probe once it hits an I/O error from the
partition checkers.  This would prevent the actual partition checker
getting a chance to verify the partition.

So this patch lets check_partition() continue probing untill it hits a
success while recording the I/O error which might have been reported by the
checking routines.

Also, it does some cleanup of the partition methods for ibm, atari and
amiga to return -1 upon hitting an I/O error.

Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix rescan_partitions to return errors properly

The current rescan_partition implementation ignores the errors that comes from
the lower layer.  It reports success for unknown partitions as well as I/O
error cases while reading the partition information.

The unknown partition is not (and will not be) considered as an error in the
kernel, since there are legal users of it (e.g, members of a RAID5 MD Device
or a new disk which is not partitioned at all ).  Changing this behaviour
would scare the user about a serious problem with their disk and is not
recommended.  Thus for both "unknown partitions" to the Linux (eg., DEC
VMS,Novell Netware) and the legal users of NULL partition, would still be
reported as "SUCCESS".

The patch attached here, scares the user about something which he does need to
worry about.  i.e, returning -EIO on disk I/O errors while reading the
partition information.

Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Cc: Erik Mouw <erik@harddisk-recovery.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: cleanup cciss_interrupt mode

A pretty simple cleanup for cciss_interrupt_mode.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: add support for 1024 logical volumes

Add the support for a large number of logical volumes.  We will soon have
hardware that support up to 1024 logical volumes.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: remove unused revalidate_allvol function

Remove the no longer used revalidate_allvol function.  It was replaced by
rebuild_lun_table.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: change cciss_open for consistency

Change our open to test for drv->heads like we do in other places in the
driver.  Mostly for consistency.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: set sector_size to 2048 for performance

Change the blk_queue_max_sectors from 512 to 2048.  This helps increase
performance.

[akpm@osdl.org: s/sector_size/max_sectors/]
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: disable DMA prefetch on P600

Unconditionally disable DMA prefetch on the P600 controller.  An ASIC bug may
result in prefetching beyond the end of physical memory.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: fix pci ssid for the E500 controller

Change the SSID on the E500 as a workaround for a firmware bug.  It looks like
the original patch was backed out between rc2 and rc4.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: increase number of commands on controller

Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds.  Most Smart Array
controllers can support up to 1024 commands but the E200 family can only
support 128.  To prevent annoying "fifo full" messages we define nr_cmds on a
per controller basis by adding it the product table.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: reference driver support

Add the support to fire up on any HP RAID class device that has a valid cciss
signature.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: version change

Change the cciss version number to 3.6.14 to reflect the following
functionality changes added by the rest of the set.  They include:

 - Support to fire up on any HP RAID class controller
 - Increase nr_cmds to 512 for most controllers by adding it to the product table
 - PCI subsystem ID fix fix was pulled
 - Disable DMA prefetch for the P600 on IPF platforms
 - Change from 512 to 2048 sector_size for performance
 - Fix in cciss_open for consistency
 - Remove the no longer used revalidate_allvol function
 - Bug fix for busy configuring
 - Support for more than 16 logical volumes
 - Cleanups in cciss_interrupt_mode
 - Fix for iostats, it's been broken for several kernel releases

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix v850 compilation

More fallout of the post 2.6.19-rc1 IRQ changes...

      CC      init/main.o
    In file included from
    /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/rtc.h:102,
                     from
    /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/efi.h:19,
                     from
    /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/init/main.c:43:
    /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/interrupt.h:67:
    error: conflicting types for 'irq_handler_t'
    include2/asm/irq.h:49: error: previous declaration of 'irq_handler_t' was here

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: use get_random_bytes() after random pool is seeded

When the UML network driver generates random MACs for its devices, it was
possible for a number of UMLs to get the same MACs because the ethernet
initialization was done before the random pool was properly seeded.

This patch moves the initialization later so that it gets better randomness.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: size register files correctly

We were using the wrong symbol to size register files.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: include asm/page.h in order to get PAGE_SHIFT

Include the proper header to get a definition of PAGE_SHIFT.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: include stddef.h correctly

We were not including stddef.h in files that used offsetof.

One file was also including linux/stddef.h for no perciptible reason.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68k: replace kmalloc+memset with kzalloc

Replace kmalloc+memset with kzalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Use freezeable workqueues in XFS

Make the workqueues used by XFS freezeable, so their worker threads don't
submit any I/O after the suspend image has been created.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Cc: David Chinner <dgc@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Support for freezeable workqueues

Make it possible to create a workqueue the worker thread of which will be
frozen during suspend, along with other kernel threads.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Cc: David Chinner <dgc@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: kill write-only variable

Cleanup write-only variable, suggested by D Binderman.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PM: Fix swsusp debug mode testproc

The 'testproc' swsusp debug mode thaws tasks twice in a row, which is _very_
confusing.  Fix that.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s2ram debugging documentation

Linus posted quite nice TRACE_RESUME how-to, and I think it is too nice to
be hidden in archives of mailing list, so I turned it into Documentation
piece.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: Fix labels

Move all labels in the swsusp code to the second column, so that they won't
fool diff -p.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: Fix coding style in suspend.c

Fix coding style in suspend.c.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: Untangle freeze_processes

Move the loop from freeze_processes() to a separate function and call it
independently for user space processes and kernel threads so that the order
of freezing tasks is clearly visible.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: Untangle thaw_processes

Move the loop from thaw_processes() to a separate function and call it
independently for kernel threads and user space processes so that the order
of thawing tasks is clearly visible.

Drop thaw_kernel_threads() which is never used.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] convert pm_sem to a mutex

The power management semaphore is only used as mutex, so convert it.

[akpm@osdl.org: fix rotten bug]
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] suspend to disk fails if gdb is suspended with a traced child

Fix http://bugzilla.kernel.org/show_bug.cgi?id=7534

Fix the freezing of processes so that it won't fail if there is a traced
process the parent of which has been stopped.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: maurice barnum <pixi+kbug@burble.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: Measure memory shrinking time

Make swsusp measure and print the time needed to shrink memory during the
suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] suspend: don't change cpus_allowed for task initiating the suspend

Don't modify the cpus_allowed of the task initiating the suspend.
_cpu_down() already makes sure that the task doing the suspend doesn't run
on dying cpu.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: Support i386 systems with PAE or without PSE

Make swsusp support i386 systems with PAE or without PSE.

This is done by creating temporary page tables located in resume-safe page
frames before the suspend image is restored in the same way as x86_64 does
it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Nigel Cunningham <ncunningham@linuxmail.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: thaw userspace and kernel space separately

Modify process thawing so that we can thaw kernel space without thawing
userspace, and thaw kernelspace first.  This will be useful in later
patches, where I intend to get swsusp thawing kernel threads only before
seeking to free memory.

Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: clean up whitespace in freezer output

Minor whitespace and formatting modifications for the freezer.

Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: quieten Freezer if !CONFIG_PM_DEBUG

The freezer currently prints an '=' for every process that is frozen.  This
is pretty pointless, as the equals sign says nothing about which process is
frozen, and makes logs look messier (especially if there were a large
number of processes running).  All we really need to know is that we
started trying to freeze processes and what processes (if any) failed to
freeze, or that we succeeded.

Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add include/linux/freezer.h and move definitions from sched.h

Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.

[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: fix platform mode

At some point after 2.6.13, in-kernel software suspend got "incomplete" for
the so-called "platform" mode.  pm_ops->prepare() is never called.  A
visible sign of this is the "moon" light on thinkpads not flashing during
suspend.  Fix by readding the pm_ops->prepare call during suspend.

Signed-off-by: Stefan Seyfried <seife@suse.de>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: use __GFP_WAIT

swsusp uses GFP_ATOMIC, but it can afford to use __GFP_WAIT, which will
permit it to reclaim clean pagecache instead of emitting scary
page-allocation-failure messages.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: Improve handling of highmem

Currently swsusp saves the contents of highmem pages by copying them to the
normal zone which is quite inefficient (eg.  it requires two normal pages
to be used for saving one highmem page).  This may be improved by using
highmem for saving the contents of saveable highmem pages.

Namely, during the suspend phase of the suspend-resume cycle we try to
allocate as many free highmem pages as there are saveable highmem pages.
If there are not enough highmem image pages to store the contents of all of
the saveable highmem pages, some of them will be stored in the "normal"
memory.  Next, we allocate as many free "normal" pages as needed to store
the (remaining) image data.  We use a memory bitmap to mark the allocated
free pages (ie.  highmem as well as "normal" image pages).

Now, we use another memory bitmap to mark all of the saveable pages
(highmem as well as "normal") and the contents of the saveable pages are
copied into the image pages.  Then, the second bitmap is used to save the
pfns corresponding to the saveable pages and the first one is used to save
their data.

During the resume phase the pfns of the pages that were saveable during the
suspend are loaded from the image and used to mark the "unsafe" page
frames.  Next, we try to allocate as many free highmem page frames as to
load all of the image data that had been in the highmem before the suspend
and we allocate so many free "normal" page frames that the total number of
allocated free pages (highmem and "normal") is equal to the size of the
image.  While doing this we have to make sure that there will be some extra
free "normal" and "safe" page frames for two lists of PBEs constructed
later.

Now, the image data are loaded, if possible, into their "original" page
frames.  The image data that cannot be written into their "original" page
frames are loaded into "safe" page frames and their "original" kernel
virtual addresses, as well as the addresses of the "safe" pages containing
their copies, are stored in one of two lists of PBEs.

One list of PBEs is for the copies of "normal" suspend pages (ie.  "normal"
pages that were saveable during the suspend) and it is used in the same way
as previously (ie.  by the architecture-dependent parts of swsusp).  The
other list of PBEs is for the copies of highmem suspend pages.  The pages
in this list are restored (in a reversible way) right before the
arch-dependent code is called.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: update userland interface documentation

The swsusp userland interface has recently changed for a couple of times, but
the changes have not been documented.  Fix this, and document the
SNAPSHOT_SET_SWAP_AREA ioctl().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: add ioctl for swap files support

To be able to use swap files as suspend storage from the userland suspend
tools we need an additional ioctl() that will allow us to provide the kernel
with both the swap header's offset and the identification of the resume
partition.

The new ioctl() should be regarded as a replacement for the
SNAPSHOT_SET_SWAP_FILE ioctl() that from now on will be considered as
obsolete, but has to stay for backwards compatibility of the interface.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: document support for swap files

Document the "resume_offset=" command line parameter as well as the way in
which swap files are supported by swsusp.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: add resume_offset command line parameter

Add the kernel command line parameter "resume_offset=" allowing us to specify
the offset, in <PAGE_SIZE> units, from the beginning of the partition pointed
to by the "resume=" parameter at which the swap header is located.

This offset can be determined, for example, by an application using the FIBMAP
ioctl to obtain the swap header's block number for given file.

[akpm@osdl.org: we don't know what type sector_t is]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: use block device offsets to identify swap locations

Make swsusp use block device offsets instead of swap offsets to identify swap
locations and make it use the same code paths for writing as well as for
reading data.

This allows us to use the same code for handling swap files and swap
partitions and to simplify the code, eg.  by dropping rw_swap_page_sync().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: rearrange swap-handling code

Rearrange the code in kernel/power/swap.c so that the next patch is more
readable.

[This patch only moves the existing code.]

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: use partition device and offset to identify swap areas

The Linux kernel handles swap files almost in the same way as it handles swap
partitions and there are only two differences between these two types of swap
areas:

(1) swap files need not be contiguous,

(2) the header of a swap file is not in the first block of the partition
    that holds it.  From the swsusp's point of view (1) is not a problem,
    because it is already taken care of by the swap-handling code, but (2) has
    to be taken into consideration.

In principle the location of a swap file's header may be determined with the
help of appropriate filesystem driver.  Unfortunately, however, it requires
the filesystem holding the swap file to be mounted, and if this filesystem is
journaled, it cannot be mounted during a resume from disk.  For this reason we
need some other means by which swap areas can be identified.

For example, to identify a swap area we can use the partition that holds the
area and the offset from the beginning of this partition at which the swap
header is located.

The following patch allows swsusp to identify swap areas this way.  It changes
swap_type_of() so that it takes an additional argument representing an offset
of the swap header within the partition represented by its first argument.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uswsusp: add pmops->{prepare,enter,finish} support (aka "platform mode")

Add an ioctl to the userspace swsusp code that enables the usage of the
pmops->prepare, pmops->enter and pmops->finish methods (the in-kernel
suspend knows these as "platform method").  These are needed on many
machines to (among others) speed up resuming by letting the BIOS skip some
steps or let my hp nx5000 recognise the correct ac_adapter state after
resume again.

It also ensures on many machines, that changed hardware (unplugged AC
adapters) gets correctly detected and that kacpid does not run wild after
resume.

Signed-off-by: Stefan Seyfried <seife@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] alpha: switch to pci_get API

Now that we have pci_get_bus_and_slot we can do the job correctly.  Note that
some of these calls intentionally leak a device - this is because the device
in question is always needed from boot to reboot.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] h8300 stray bracket fix

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] avr32: fixup kprobes preemption handling

While working on SH kprobes, I noticed that avr32 got the preemption
handling wrong in the no probe case.  The idea is that upon entry of
kprobe_handler() preemption is disabled outright across the life of the
kprobe, only to be re-enabled in post_kprobe_handler().

However, in the event that the probe is never activated, there's never any
chance of hitting the post probe handler, which allows for the current
avr32 implementation to disable preemption indefinitely, as it's currently
missing a re-enable when no probe is activated.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] arch/frv/kernel/futex.c must #include <linux/uaccess.h>

This patch fixes the following compile error with
-Werror-implicit-function-declaration
(without -Werror-implicit-function-declaration it's a link error):

    ...
      CC      arch/frv/kernel/futex.o
    /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/arch/frv/kernel/futex.c:
    In function 'futex_atomic_op_inuser':
    /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/arch/frv/kernel/futex.c:203:
    error: implicit declaration of function 'pagefault_disable'
    /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/arch/frv/kernel/futex.c:226:
    error: implicit declaration of function 'pagefault_enable'
    make[2]: *** [arch/frv/kernel/futex.o] Error 1
    ...

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] security/keys/*: user kmemdup()

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] radix-tree: RCU lockless readside

Make radix tree lookups safe to be performed without locks.  Readers are
protected against nodes being deleted by using RCU based freeing.  Readers
are protected against new node insertion by using memory barriers to ensure
the node itself will be properly written before it is visible in the radix
tree.

Each radix tree node keeps a record of their height (above leaf nodes).
This height does not change after insertion -- when the radix tree is
extended, higher nodes are only inserted in the top.  So a lookup can take
the pointer to what is *now* the root node, and traverse down it even if
the tree is concurrently extended and this node becomes a subtree of a new
root.

"Direct" pointers (tree height of 0, where root->rnode points directly to
the data item) are handled by using the low bit of the pointer to signal
whether rnode is a direct pointer or a pointer to a radix tree node.

When a reader wants to traverse the next branch, they will take a copy of
the pointer.  This pointer will be either NULL (and the branch is empty) or
non-NULL (and will point to a valid node).

[akpm@osdl.org: cleanups]
[Lee.Schermerhorn@hp.com: bugfixes, comments, simplifications]
[clameter@sgi.com: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Save some bytes in struct mm_struct

Before:
[acme@newtoy net-2.6.20]$ pahole --cacheline 32 kernel/sched.o mm_struct

/* include2/asm/processor.h:542 */
struct mm_struct {
        struct vm_area_struct *    mmap;                 /*     0     4 */
        struct rb_root             mm_rb;                /*     4     4 */
        struct vm_area_struct *    mmap_cache;           /*     8     4 */
        long unsigned int          (*get_unmapped_area)(); /*    12     4 */
        void                       (*unmap_area)();      /*    16     4 */
        long unsigned int          mmap_base;            /*    20     4 */
        long unsigned int          task_size;            /*    24     4 */
        long unsigned int          cached_hole_size;     /*    28     4 */
        /* ---------- cacheline 1 boundary ---------- */
        long unsigned int          free_area_cache;      /*    32     4 */
        pgd_t *                    pgd;                  /*    36     4 */
        atomic_t                   mm_users;             /*    40     4 */
        atomic_t                   mm_count;             /*    44     4 */
        int                        map_count;            /*    48     4 */
        struct rw_semaphore        mmap_sem;             /*    52    64 */
        spinlock_t                 page_table_lock;      /*   116    40 */
        struct list_head           mmlist;               /*   156     8 */
        mm_counter_t               _file_rss;            /*   164     4 */
        mm_counter_t               _anon_rss;            /*   168     4 */
        long unsigned int          hiwater_rss;          /*   172     4 */
        long unsigned int          hiwater_vm;           /*   176     4 */
        long unsigned int          total_vm;             /*   180     4 */
        long unsigned int          locked_vm;            /*   184     4 */
        long unsigned int          shared_vm;            /*   188     4 */
        /* ---------- cacheline 6 boundary ---------- */
        long unsigned int          exec_vm;              /*   192     4 */
        long unsigned int          stack_vm;             /*   196     4 */
        long unsigned int          reserved_vm;          /*   200     4 */
        long unsigned int          def_flags;            /*   204     4 */
        long unsigned int          nr_ptes;              /*   208     4 */
        long unsigned int          start_code;           /*   212     4 */
        long unsigned int          end_code;             /*   216     4 */
        long unsigned int          start_data;           /*   220     4 */
        /* ---------- cacheline 7 boundary ---------- */
        long unsigned int          end_data;             /*   224     4 */
        long unsigned int          start_brk;            /*   228     4 */
        long unsigned int          brk;                  /*   232     4 */
        long unsigned int          start_stack;          /*   236     4 */
        long unsigned int          arg_start;            /*   240     4 */
        long unsigned int          arg_end;              /*   244     4 */
        long unsigned int          env_start;            /*   248     4 */
        long unsigned int          env_end;              /*   252     4 */
        /* ---------- cacheline 8 boundary ---------- */
        long unsigned int          saved_auxv[44];       /*   256   176 */
        unsigned int               dumpable:2;           /*   432     4 */
        cpumask_t                  cpu_vm_mask;          /*   436     4 */
        mm_context_t               context;              /*   440    68 */
        long unsigned int          swap_token_time;      /*   508     4 */
        /* ---------- cacheline 16 boundary ---------- */
        char                       recent_pagein;        /*   512     1 */

        /* XXX 3 bytes hole, try to pack */

        int                        core_waiters;         /*   516     4 */
        struct completion *        core_startup_done;    /*   520     4 */
        struct completion          core_done;            /*   524    52 */
        rwlock_t                   ioctx_list_lock;      /*   576    36 */
        struct kioctx *            ioctx_list;           /*   612     4 */
}; /* size: 616, sum members: 613, holes: 1, sum holes: 3, cachelines: 20,
      last cacheline: 8 bytes */

After:

[acme@newtoy net-2.6.20]$ pahole --cacheline 32 kernel/sched.o mm_struct
/* include2/asm/processor.h:542 */
struct mm_struct {
        struct vm_area_struct *    mmap;                 /*     0     4 */
        struct rb_root             mm_rb;                /*     4     4 */
        struct vm_area_struct *    mmap_cache;           /*     8     4 */
        long unsigned int          (*get_unmapped_area)(); /*    12     4 */
        void                       (*unmap_area)();      /*    16     4 */
        long unsigned int          mmap_base;            /*    20     4 */
        long unsigned int          task_size;            /*    24     4 */
        long unsigned int          cached_hole_size;     /*    28     4 */
        /* ---------- cacheline 1 boundary ---------- */
        long unsigned int          free_area_cache;      /*    32     4 */
        pgd_t *                    pgd;                  /*    36     4 */
        atomic_t                   mm_users;             /*    40     4 */
        atomic_t                   mm_count;             /*    44     4 */
        int                        map_count;            /*    48     4 */
        struct rw_semaphore        mmap_sem;             /*    52    64 */
        spinlock_t                 page_table_lock;      /*   116    40 */
        struct list_head           mmlist;               /*   156     8 */
        mm_counter_t               _file_rss;            /*   164     4 */
        mm_counter_t               _anon_rss;            /*   168     4 */
        long unsigned int          hiwater_rss;          /*   172     4 */
        long unsigned int          hiwater_vm;           /*   176     4 */
        long unsigned int          total_vm;             /*   180     4 */
        long unsigned int          locked_vm;            /*   184     4 */
        long unsigned int          shared_vm;            /*   188     4 */
        /* ---------- cacheline 6 boundary ---------- */
        long unsigned int          exec_vm;              /*   192     4 */
        long unsigned int          stack_vm;             /*   196     4 */
        long unsigned int          reserved_vm;          /*   200     4 */
        long unsigned int          def_flags;            /*   204     4 */
        long unsigned int          nr_ptes;              /*   208     4 */
        long unsigned int          start_code;           /*   212     4 */
        long unsigned int          end_code;             /*   216     4 */
        long unsigned int          start_data;           /*   220     4 */
        /* ---------- cacheline 7 boundary ---------- */
        long unsigned int          end_data;             /*   224     4 */
        long unsigned int          start_brk;            /*   228     4 */
        long unsigned int          brk;                  /*   232     4 */
        long unsigned int          start_stack;          /*   236     4 */
        long unsigned int          arg_start;            /*   240     4 */
        long unsigned int          arg_end;              /*   244     4 */
        long unsigned int          env_start;            /*   248     4 */
        long unsigned int          env_end;              /*   252     4 */
        /* ---------- cacheline 8 boundary ---------- */
        long unsigned int          saved_auxv[44];       /*   256   176 */
        cpumask_t                  cpu_vm_mask;          /*   432     4 */
        mm_context_t               context;              /*   436    68 */
        long unsigned int          swap_token_time;      /*   504     4 */
        char                       recent_pagein;        /*   508     1 */
        unsigned char              dumpable:2;           /*   509     1 */

        /* XXX 2 bytes hole, try to pack */

        int                        core_waiters;         /*   512     4 */
        struct completion *        core_startup_done;    /*   516     4 */
        struct completion          core_done;            /*   520    52 */
        rwlock_t                   ioctx_list_lock;      /*   572    36 */
        struct kioctx *            ioctx_list;           /*   608     4 */
}; /* size: 612, sum members: 610, holes: 1, sum holes: 2, cachelines: 20,
      last cacheline: 4 bytes */

[acme@newtoy net-2.6.20]$ codiff -V /tmp/sched.o.before kernel/sched.o
/pub/scm/linux/kernel/git/acme/net-2.6.20/kernel/sched.c:
  struct mm_struct |   -4
    dumpable:2;
     from: unsigned int          /*   432(30)    4(2) */
     to:   unsigned char         /*   509(6)     1(2) */
< SNIP other offset changes >
 1 struct changed
[acme@newtoy net-2.6.20]$

I'm not aware of any problem about using 2 byte wide bitfields where
previously a 4 byte wide one was, holler if there is any, I wouldn't be
surprised, bitfields are things from hell.

For the curious, 432(30) means: at offset 432 from the struct start, at
offset 30 in the bitfield (yeah, it comes backwards, hellish, huh?) ditto
for 509(6), while 4(2) and 1(2) means "struct field size(bitfield size)".

Now we have a 2 bytes hole and are using only 4 bytes of the last 32
bytes cacheline, any takers? :-)

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mm: make compound page destructor handling explicit

Currently we we use the lru head link of the second page of a compound page
to hold its destructor.  This was ok when it was purely an internal
implmentation detail.  However, hugetlbfs overrides this destructor
violating the layering.  Abstract this out as explicit calls, also
introduce a type for the callback function allowing them to be type
checked.  For each callback we pre-declare the function, causing a type
error on definition rather than on use elsewhere.

[akpm@osdl.org: cleanups]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: better fallback allocation behavior

Currently we simply attempt to allocate from all allowed nodes using
GFP_THISNODE.  However, GFP_THISNODE does not do reclaim (it wont do any at
all if the recent GFP_THISNODE patch is accepted).  If we truly run out of
memory in the whole system then fallback_alloc may return NULL although
memory may still be available if we would perform more thorough reclaim.

This patch changes fallback_alloc() so that we first only inspect all the
per node queues for available slabs.  If we find any then we allocate from
those.  This avoids slab fragmentation by first getting rid of all partial
allocated slabs on every node before allocating new memory.

If we cannot satisfy the allocation from any per node queue then we extend
a slab.  We now call into the page allocator without specifying
GFP_THISNODE.  The page allocator will then implement its own fallback (in
the given cpuset context), perform necessary reclaim (again considering not
a single node but the whole set of allowed nodes) and then return pages for
a new slab.

We identify from which node the pages were allocated and then insert the
pages into the corresponding per node structure.  In order to do so we need
to modify cache_grow() to take a parameter that specifies the new slab.
kmem_getpages() can no longer set the GFP_THISNODE flag since we need to be
able to use kmem_getpage to allocate from an arbitrary node.  GFP_THISNODE
needs to be specified when calling cache_grow().

One key advantage is that the decision from which node to allocate new
memory is removed from slab fallback processing.  The patch allows to go
back to use of the page allocators fallback/reclaim logic.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] GFP_THISNODE must not trigger global reclaim

The intent of GFP_THISNODE is to make sure that an allocation occurs on a
particular node.  If this is not possible then NULL needs to be returned so
that the caller can choose what to do next on its own (the slab allocator
depends on that).

However, GFP_THISNODE currently triggers reclaim before returning a failure
(GFP_THISNODE means GFP_NORETRY is set).  If we have over allocated a node
then we will currently do some reclaim before returning NULL.  The caller
may want memory from other nodes before reclaim should be triggered.  (If
the caller wants reclaim then he can directly use __GFP_THISNODE instead).

There is no flag to avoid reclaim in the page allocator and adding yet
another GFP_xx flag would be difficult given that we are out of available
flags.

So just compare and see if all bits for GFP_THISNODE (__GFP_THISNODE,
__GFP_NORETRY and __GFP_NOWARN) are set.  If so then we return NULL before
waking up kswapd.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: fix two issues in kmalloc_node / __cache_alloc_node

This addresses two issues:

1. Kmalloc_node() may intermittently return NULL if we are allocating
   from the current node and are unable to obtain memory for the current
   node from the page allocator.  This is because we call ___cache_alloc()
   if nodeid == numa_node_id() and ____cache_alloc is not able to fallback
   to other nodes.

   This was introduced in the 2.6.19 development cycle.  <= 2.6.18 in
   that case does not do a restricted allocation and blindly trusts the
   page allocator to have given us memory from the indicated node.  It
   inserts the page regardless of the node it came from into the queues for
   the current node.

2. If kmalloc_node() is used on a node that has not been bootstrapped
   yet then we may try to pass an invalid node number to
   ____cache_alloc_node() triggering a BUG().

   Change the function to call fallback_alloc() instead.  Only call
   fallback_alloc() if we are allowed to fallback at all.  The need to
   handle a node not bootstrapped yet also first surfaced in the 2.6.19
   cycle.

Update the comments since they were still describing the old kmalloc_node
from 2.6.12.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: deprecate kmem_cache_t

Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: remove kmem_cache_t

Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#

set -e

for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done

The script was run like this

sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: remove SLAB_DMA

SLAB_DMA is an alias of GFP_DMA. This is the last one so we
remove the leftover comment too.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: remove SLAB_KERNEL

SLAB_KERNEL is an alias of GFP_KERNEL.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: remove SLAB_ATOMIC

SLAB_ATOMIC is an alias of GFP_ATOMIC

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: remove SLAB_USER

SLAB_USER is an alias of GFP_USER

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: remove SLAB_NOFS

SLAB_NOFS is an alias of GFP_NOFS.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: remove SLAB_NOIO

SLAB_NOIO is an alias of GFP_NOIO with a single instance of use.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: remove SLAB_LEVEL_MASK

SLAB_LEVEL_MASK is only used internally to the slab and is
and alias of GFP_LEVEL_MASK.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: remove SLAB_NO_GROW

It is only used internally in the slab.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kill install_file_pte's pte_val

David Binderman and his Intel C compiler rightly observe that
install_file_pte no longer has any use for its pte_val.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: d binderman <dcb314@hotmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mm: cleanup indentation on switch for CPU operations

These patches introduced new switch statements which are indented contrary
to the concensus in mm/*.c.  Fix them up to match that concensus.

    [PATCH] node local per-cpu-pages
    [PATCH] ZVC: Scale thresholds depending on the size of the system
    commit e7c8d5c9955a4d2e88e36b640563f5d6d5aba48a
    commit df9ecaba3f152d1ea79f2a5e0b87505e03f47590

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] reject corrupt swapfiles earlier

The fsfuzzer found this; with a corrupt small swapfile that claims to have
many pages:

  [root]# file swap.741.img
  swap.741.img: Linux/i386 swap file (new style) 1 (4K pages) size 1040191487 pages
  [root]# ls -l swap.741.img
  -rw-r--r-- 1 root root 16777216 Nov 22 05:18 swap.741.img

sys_swapon() will try to vmalloc all those pages, and -then- check to see if
the file is actually that large:

                if (!(p->swap_map = vmalloc(maxpages * sizeof(short)))) {
  <snip>
        if (swapfilesize && maxpages > swapfilesize) {
                printk(KERN_WARNING
                       "Swap area shorter than signature indicates\n");

It seems to me that it would make more sense to move this test up before
the vmalloc, with the other checks, to avoid the OOM-killer in this
situation...

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] silence unused pgdat warning from alloc_bootmem_node and friends

x86 NUMA systems only define bootmem for node 0.  alloc_bootmem_node() and
friends therefore ignore the passed pgdat and use NODE_DATA(0) in all
cases.  This leads to the following warnings as we are not using the passed
parameter:

  .../mm/page_alloc.c: In function 'zone_wait_table_init':
  .../mm/page_alloc.c:2259: warning: unused variable 'pgdat'

One option would be to define all variables used with these macros
__attribute__ ((unused)), but this would leave us exposed should these
become genuinely unused.

The key here is that we _are_ using the value, we ignore it but that is a
deliberate action.  This patch adds a nested local variable within the
alloc_bootmem_node helper to which the pgdat parameter is assigned making
it 'used'.  The nested local is marked __attribute__ ((unused)) to silence
this same warning for it.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] numa node ids are int, page_to_nid and zone_to_nid should return int

NUMA node ids are passed as either int or unsigned int almost exclusivly
page_to_nid and zone_to_nid both return unsigned long.  This is a throw
back to when page_to_nid was a #define and was thus exposing the real type
of the page flags field.

In addition to fixing up the definitions of page_to_nid and zone_to_nid I
audited the users of these functions identifying the following incorrect
uses:

1) mm/page_alloc.c show_node() -- printk dumping the node id,
2) include/asm-ia64/pgalloc.h pgtable_quicklist_free() -- comparison
   against numa_node_id() which returns an int from cpu_to_node(), and
3) mm/mpolicy.c check_pte_range -- used as an index in node_isset which
   uses bit_set which in generic code takes an int.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drain_node_page(): Drain pages in batch units

drain_node_pages() currently drains the complete pageset of all pages.  If
there are a large number of pages in the queues then we may hold off
interrupts for too long.

Duplicate the method used in free_hot_cold_page.  Only drain pcp->batch
pages at one time.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Remove uses of kmem_cache_t from mm/* and include/linux/slab.h

Remove all uses of kmem_cache_t (the most were left in slab.h).  The
typedef for kmem_cache_t is then only necessary for other kernel
subsystems.  Add a comment to that effect.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Move names_cachep to linux/fs.h

The names_cachep is used for getname() and putname().  So lets put it into
fs.h near those two definitions.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Move fs_cachep to linux/fs_struct.h

fs_cachep is only used in kernel/exit.c and in kernel/fork.c.

It is used to store fs_struct items so it should be placed in linux/fs_struct.h

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Move filep_cachep to include/file.h

filp_cachep is only used in fs/file_table.c and in fs/dcache.c where
it is defined.

Move it to related definitions in linux/file.h.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Move files_cachep to include/file.h

Proper place is in file.h since files_cachep uses are rated to file I/O.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Move vm_area_cachep to include/mm.h

vm_area_cachep is used to store vm_area_structs. So move to mm.h.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Move sighand_cachep to include/signal.h

Move sighand_cachep definitioni to linux/signal.h

The sighand cache is only used in fs/exec.c and kernel/fork.c.  It is defined
in kernel/fork.c but only used in fs/exec.c.

The sighand_cachep is related to signal processing.  So add the definition to
signal.h.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Remove bio_cachep from slab.h

Remove bio_cachep from slab.h - it no longer exists.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] make mm/thrash.c:global_faults static

This patch makes the needlessly global "global_faults" static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] enable booting a NUMA system where some nodes have no memory

When booting a NUMA system with nodes that have no memory (eg by limiting
memory), bootmem_alloc_core tried to find pages in an uninitialized
bootmem_map.  This caused a null pointer access.  This fix adds a check, so
that NULL is returned.  That will enable the caller (bootmem_alloc_nopanic)
to alloc memory on other without a panic.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Martin Bligh <mbligh@google.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Allow NULL pointers in percpu_free

The patch (as824b) makes percpu_free() ignore NULL arguments, as one would
expect for a deallocation routine.  (Note that free_percpu is #defined as
percpu_free in include/linux/percpu.h.) A few callers are updated to remove
now-unneeded tests for NULL.  A few other callers already seem to assume
that passing a NULL pointer to percpu_free() is okay!

The patch also removes an unnecessary NULL check in percpu_depopulate().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] node-aware skb allocation

Node-aware allocation of skbs for the receive path.

Details:

  - __alloc_skb gets a new node argument and cals the node-aware
    slab functions with it.
  - netdev_alloc_skb passed the node number it gets from dev_to_node
    to it, everyone else passes -1 (any node)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>