Linus Torvalds [Mon, 10 Jan 2011 23:39:48 +0000 (15:39 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (36 commits)
sony-laptop: support new hotkeys on the P, Z and EC series
platform/x86: Consistently select LEDS Kconfig options
sony-laptop: fix sparse non-ANSI function warning
intel_ips: fix sparse non-ANSI function warning
Support KHLB2 in the compal laptop driver
acer-wmi: Enabled Acer Launch Manager mode
[PATCH] intel_pmic_gpio: modify EOI handling following change of kernel irq subsystem
ACPI Thinkpad: We must always call va_end() after va_start() but do not do so in thinkpad_acpi.c::acpi_evalf()
acer-wmi: Initialize wlan/bluetooth/wwan rfkill software block state
acer-wmi: Detect the WiFi/Bluetooth/3G devices available
acer-wmi: Add 3G rfkill sysfs file
acer-wmi: Add acer wmi hotkey events support
platform/x86: Kconfig: Replace select by depends on ACPI_WMI
ideapad: pass ideapad_priv as argument (part 2)
ideapad: pass ideapad_priv as argument (part 1)
ideapad: add markups, unify comments and return result when init
ideapad: add hotkey support
ideapad: let camera power control entry under platform driver
ideapad: add platform driver for ideapad
fujitsu-laptop: fix compiler warning on pnp_ids
...
Linus Torvalds [Mon, 10 Jan 2011 23:39:23 +0000 (15:39 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68knommu: Need to check __get_user()/__put_user() result
m68knommu: signal.c __user annotations
m68knommu: Equivalent of "m68k: handle new gcc's"
m68knommu: f_pcr has been gone since headers' merge
m68knommu: Don't lose state if sigframe setup fails
m68knommu: Handle multiple pending signals
m68knommu: Switch to saner sigsuspend
m68knommu: Don't bother with SA_ONESHOT
m68k: Check __get_user()/__put_user() return value
m68k: Missing syscall_trace() on sigreturn
m68k: Fix stack mangling logics in sigreturn
m68k: If we fail to set sigframe up, just leave regs alone...
m68k: Don't lose state if sigframe setup fails
m68k: Simplify the singlestepping handling in signals
m68k: Switch to saner sigsuspend()
m68k: Resetting sa_handler in local copy of k_sigaction is pointless
m68k/sun3: Kill pte_unmap() warnings
Linus Torvalds [Mon, 10 Jan 2011 22:52:44 +0000 (14:52 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Avoid array overflow if there are too many cpus in SRAT table
[IA64] Remove unlikely from cpu_is_offline
[IA64] irq_ia64, use set_irq_chip
[IA64] perfmon: Change vmalloc to vzalloc and drop memset.
[IA64] eliminate race condition in smp_flush_tlb_mm
Linus Torvalds [Mon, 10 Jan 2011 22:50:38 +0000 (14:50 -0800)]
Merge branch 'for-torvalds' of git://git./linux/kernel/git/linusw/linux-stericsson
* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ux500: allow 5500 and 8500 to be built together
ux500: modem_irq is only for 5500
ux500: dynamic SOC detection
ux500: rename MOP board Kconfig
ux500: remove build-time changing macros
Linus Torvalds [Mon, 10 Jan 2011 22:50:08 +0000 (14:50 -0800)]
Merge branch 'msm-smp' of git://codeaurora.org/quic/kernel/davidb/linux-msm
* 'msm-smp' of git://codeaurora.org/quic/kernel/davidb/linux-msm:
msm: add SMP support for msm
msm: hotplug: support cpu hotplug on msm
msm: timer: SMP timer support for msm
msm: scm-boot: Support for setting cold/warm boot addresses
msm: Secure Channel Manager (SCM) support
Casey Leedom [Mon, 10 Jan 2011 21:53:43 +0000 (13:53 -0800)]
cxgb4vf: fix mailbox data/control coherency domain race
For the VFs, the Mailbox Data "registers" are actually backed by
T4's "MA" interface rather than PL Registers (as is the case for
the PFs). Because these are in different coherency domains, the
write to the VF's PL-register-backed Mailbox Control can race in
front of the writes to the MA-backed VF Mailbox Data "registers".
So we need to do a read-back on at least one byte of the VF Mailbox
Data registers before doing the write to the VF Mailbox Control
register.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
amit salecha [Mon, 10 Jan 2011 00:15:23 +0000 (00:15 +0000)]
qlcnic: change module parameter permissions
o Updating module parameter after driver load is not supported
except auto_fw_reset parameter. Changing these parameter after
driver load, can have weird result.
o Update driver version to 5.0.15.
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Mon, 10 Jan 2011 00:15:22 +0000 (00:15 +0000)]
qlcnic: fix ethtool diagnostics test
IRQ diag test was getting executed only when both register test
and link test passed. The test should get executed if ETH_TEST_FL_OFFLINE
flag is set.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
amit salecha [Mon, 10 Jan 2011 00:15:21 +0000 (00:15 +0000)]
qlcnic: fix flash fw version read
Driver is reading flash fw version from defined address, this address
may be invalid. Indeed Driver should read address for fw version through
flash layout table. Flash layout table has defined region and address for
fw version address should be read from fw image region.
Driver has check for old firmware, this bug can cause driver load fail.
This patch will try to read fw version from flash image region, if that fails,
read from defined address.
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Mon, 10 Jan 2011 04:06:58 +0000 (04:06 +0000)]
phonet: some signedness bugs
Dan Rosenberg pointed out that there were some signed comparison bugs
in the phonet protocol.
http://marc.info/?l=full-disclosure&m=
129424528425330&w=2
The problem is that we check for array overflows but "protocol" is
signed and we don't check for array underflows. If you have already
have CAP_SYS_ADMIN then you could use the bugs to get root, or someone
could cause an oops by mistake.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Frysinger [Mon, 10 Jan 2011 02:54:32 +0000 (02:54 +0000)]
netdev: bfin_mac: let boards set vlan masks
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sonic Zhang [Mon, 10 Jan 2011 02:54:33 +0000 (02:54 +0000)]
netdev: bfin_mac: disable hardware checksum if writeback cache is enabled
With writeback caches, corrupted RX packets will be sent up the stack
without any error markings.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Frysinger [Mon, 10 Jan 2011 02:54:31 +0000 (02:54 +0000)]
netdev: bfin_mac: drop unused Mac data
We don't use this local "Mac" data anywhere (since we rely on the
netdev's storage), so punt it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Frysinger [Mon, 10 Jan 2011 02:54:30 +0000 (02:54 +0000)]
netdev: bfin_mac: mark setup_system_regs as static
No need for this to be exported since it is only used in this driver.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Frysinger [Mon, 10 Jan 2011 02:54:29 +0000 (02:54 +0000)]
netdev: bfin_mac: clean up printk messages
Use netdev_* and pr_* helper funcs for output rather than printk.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jean Delvare [Mon, 10 Jan 2011 21:11:23 +0000 (22:11 +0100)]
i2c: Constify i2c_client where possible
Helper functions for I2C and SMBus transactions don't modify the
i2c_client that is passed to them, so it can be marked const.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 10 Jan 2011 21:11:23 +0000 (22:11 +0100)]
i2c-algo-bit: Complain about masters which can't read SCL
The I2C specification explicitly describes both SDA and SCL as
bidirectional lines. An I2C master with a read-only SCL is thus not
compliant. If a slow slave stretches the clock, errors will happen,
so the bus can't be considered as reliable.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 10 Jan 2011 21:11:23 +0000 (22:11 +0100)]
i2c-algo-bit: Refactor adapter registration
Use a function pointer to decide whether to call i2c_add_adapter or
i2c_add_numbered_adapter. This makes the code more compact than the
current strategy of having the common code in a separate function.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Peter Korsgaard [Mon, 10 Jan 2011 21:11:23 +0000 (22:11 +0100)]
i2c: Add generic I2C multiplexer using GPIO API
Add an i2c mux driver providing access to i2c bus segments using a
hardware MUX sitting on a master bus and controlled through gpio pins.
E.G. something like:
---------- ---------- Bus segment 1 - - - - -
| | SCL/SDA | |-------------- | |
| |------------| |
| | | | Bus segment 2 | |
| Linux | GPIO 1..N | MUX |--------------- Devices
| |------------| | | |
| | | | Bus segment M
| | | |---------------| |
---------- ---------- - - - - -
SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M
according to the settings of the GPIO pins 1..N.
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Joe Perches [Mon, 10 Jan 2011 21:11:22 +0000 (22:11 +0100)]
i2c-nforce2: Remove unnecessary cast of pci_get_drvdata
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Ben Hutchings [Mon, 10 Jan 2011 21:11:22 +0000 (22:11 +0100)]
i2c-i801: Include <linux/slab.h>
Commit
5a0e3ad6af8660be21ca98a971cd00f331318c05 added direct inclusion
of <linux/slab.h> to those source files that appeared to need it, but
somehow missed this. On most architectures <linux/slab.h> is still
indirectly included, but there are exceptions such as alpha.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
David Dillow [Fri, 26 Nov 2010 20:34:46 +0000 (15:34 -0500)]
IB/srp: consolidate hot-path variables into cache lines
Put the variables accessed together in the hot-path into common
cachelines, and separate them by RW vs RO to avoid false dirtying.
We keep a local copy of the lkey and rkey in the target to avoid
traversing pointers (and associated cache lines) to find them.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Dillow <dillowda@ornl.gov>
Bart Van Assche [Fri, 26 Nov 2010 20:08:38 +0000 (15:08 -0500)]
IB/srp: stop sharing the host lock with SCSI
We don't need protection against the SCSI stack, so use our own lock to
allow parallel progress on separate CPUs.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ broken out and small cleanups by David Dillow ]
Signed-off-by: David Dillow <dillowda@ornl.gov>
Bart Van Assche [Fri, 26 Nov 2010 19:50:09 +0000 (14:50 -0500)]
IB/srp: reduce lock coverage of command completion
We only need the lock to cover list and credit manipulations, so push
those into srp_remove_req() and update the call chains.
We reorder the request removal and command completion in
srp_process_rsp() to avoid the SCSI mid-layer sending another command
before we've released our request and added any credits returned by the
target. This prevents us from returning HOST_BUSY unneccesarily.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ broken out, small cleanups, and modified to avoid potential extraneous
HOST_BUSY returns by David Dillow ]
Signed-off-by: David Dillow <dillowda@ornl.gov>
Bart Van Assche [Fri, 26 Nov 2010 19:37:47 +0000 (14:37 -0500)]
IB/srp: reduce local coverage for command submission and EH
We only need locks to protect our lists and number of credits available.
By pre-consuming the credit for the request, we can reduce our lock
coverage to just those areas. If we don't actually send the request,
we'll need to put the credit back into the pool.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ broken out and small cleanups by David Dillow ]
Signed-off-by: David Dillow <dillowda@ornl.gov>
Bart Van Assche [Fri, 26 Nov 2010 18:58:27 +0000 (13:58 -0500)]
IB/srp: don't move active requests to their own list
We use req->scmnd != NULL to indicate an active request, so there's no
need to keep a separate list for them. We can afford the array iteration
during error handling, and dropping it gives us one less item that needs
lock protection.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ broken out and small cleanups by David Dillow ]
Signed-off-by: David Dillow <dillowda@ornl.gov>
William Hubbs [Thu, 16 Dec 2010 19:26:58 +0000 (13:26 -0600)]
staging: speakup: fix failure handling
fix the failure handling in kobjects and the main function so that we
release the virtual keyboard if we exit due to another failure.
Signed-off-by: William Hubbs <w.d.hubbs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Márton Németh [Mon, 13 Dec 2010 20:59:09 +0000 (21:59 +0100)]
staging: usbip: remove double giveback of URB
In the vhci_urb_dequeue() function the TCP connection is checked twice.
Each time when the TCP connection is closed the URB is unlinked and given
back. Remove the second attempt of unlinking and giving back of the URB completely.
This patch fixes the bug described at https://bugzilla.kernel.org/show_bug.cgi?id=24872 .
Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trond Myklebust [Mon, 10 Jan 2011 19:48:02 +0000 (14:48 -0500)]
Merge branch 'bugfixes' into nfs-for-2.6.38
Conflicts:
fs/nfs/nfs2xdr.c
fs/nfs/nfs3xdr.c
fs/nfs/nfs4xdr.c
Trond Myklebust [Sat, 8 Jan 2011 22:45:38 +0000 (17:45 -0500)]
NFS: Don't use vm_map_ram() in readdir
vm_map_ram() is not available on NOMMU platforms, and causes trouble
on incoherrent architectures such as ARM when we access the page data
through both the direct and the virtual mapping.
The alternative is to use the direct mapping to access page data
for the case when we are not crossing a page boundary, but to copy
the data into a linear scratch buffer when we are accessing data
that spans page boundaries.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@kernel.org [2.6.37]
Linus Torvalds [Mon, 10 Jan 2011 19:18:59 +0000 (11:18 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (30 commits)
MAINTAINERS: Add tomoyo-dev-en ML.
SELinux: define permissions for DCB netlink messages
encrypted-keys: style and other cleanup
encrypted-keys: verify datablob size before converting to binary
trusted-keys: kzalloc and other cleanup
trusted-keys: additional TSS return code and other error handling
syslog: check cap_syslog when dmesg_restrict
Smack: Transmute labels on specified directories
selinux: cache sidtab_context_to_sid results
SELinux: do not compute transition labels on mountpoint labeled filesystems
This patch adds a new security attribute to Smack called SMACK64EXEC. It defines label that is used while task is running.
SELinux: merge policydb_index_classes and policydb_index_others
selinux: convert part of the sym_val_to_name array to use flex_array
selinux: convert type_val_to_struct to flex_array
flex_array: fix flex_array_put_ptr macro to be valid C
SELinux: do not set automatic i_ino in selinuxfs
selinux: rework security_netlbl_secattr_to_sid
SELinux: standardize return code handling in selinuxfs.c
SELinux: standardize return code handling in selinuxfs.c
SELinux: standardize return code handling in policydb.c
...
Eric Dumazet [Mon, 10 Jan 2011 19:11:38 +0000 (20:11 +0100)]
netfilter: x_tables: dont block BH while reading counters
Using "iptables -L" with a lot of rules have a too big BH latency.
Jesper mentioned ~6 ms and worried of frame drops.
Switch to a per_cpu seqlock scheme, so that taking a snapshot of
counters doesnt need to block BH (for this cpu, but also other cpus).
This adds two increments on seqlock sequence per ipt_do_table() call,
its a reasonable cost for allowing "iptables -L" not block BH
processing.
Reported-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Josh Hunt [Mon, 27 Dec 2010 21:46:38 +0000 (13:46 -0800)]
ext2: Resolve 'dereferencing pointer to incomplete type' when enabling EXT2_XATTR_DEBUG
When I enable EXT2_XATTR_DEBUG in fs/ext2/xattr.c I get a build error stating
the following:
CC fs/ext2/xattr.o
fs/ext2/xattr.c: In function 'ext2_xattr_cache_insert':
fs/ext2/xattr.c:841: error: dereferencing pointer to incomplete type
fs/ext2/xattr.c:846: error: dereferencing pointer to incomplete type
make[2]: *** [fs/ext2/xattr.o] Error 1
make[1]: *** [fs/ext2] Error 2
make: *** [fs] Error 2
These lines reference ext2_xattr_cache->c_entry_count which is defined
in struct mb_cache. struct mb_cache is currently only defined in fs/mbcache.c.
Moving struct mb_cache definition to include/linux/mbcache.h to resolve the
issue.
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Tobias Klauser [Thu, 9 Dec 2010 14:39:34 +0000 (15:39 +0100)]
ext3: Remove redundant unlikely()
IS_ERR() already implies unlikely(), so it can be omitted here.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jan Kara <jack@suse.cz>
Tobias Klauser [Thu, 9 Dec 2010 14:39:00 +0000 (15:39 +0100)]
ext2: Remove redundant unlikely()
IS_ERR() already implies unlikely(), so it can be omitted here.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jan Kara <jack@suse.cz>
Eric Sandeen [Tue, 7 Dec 2010 17:55:27 +0000 (11:55 -0600)]
ext3: speed up file creates by optimizing rec_len functions
The addition of 64k block capability in the rec_len_from_disk
and rec_len_to_disk functions added a bit of math overhead which
slows down file create workloads needlessly when the architecture
cannot even support 64k blocks, thanks to page size limits.
Similar changes already exist in the ext4 codebase.
The directory entry checking can also be optimized a bit
by sprinkling in some unlikely() conditions to move the
error handling out of line.
bonnie++ sequential file creates on a 512MB ramdisk speeds up
from about 77,000/s to about 82,000/s, about a 6% improvement.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Eric Sandeen [Tue, 7 Dec 2010 17:51:05 +0000 (11:51 -0600)]
ext2: speed up file creates by optimizing rec_len functions
The addition of 64k block capability in the rec_len_from_disk
and rec_len_to_disk functions added a bit of math overhead which
slows down file create workloads needlessly when the architecture
cannot even support 64k blocks, thanks to page size limits.
The directory entry checking can also be optimized a bit
by sprinkling in some unlikely() conditions to move the
error handling out of line.
bonnie++ sequential file creates on a 512MB ramdisk speeds up
from about 2200/s to about 2500/s, about a 14% improvement.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Namhyung Kim [Wed, 24 Nov 2010 16:53:13 +0000 (01:53 +0900)]
ext3: Add more journal error check
Check return value of ext3_journal_get_write_acccess() and
ext3_journal_dirty_metadata().
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Namhyung Kim [Wed, 24 Nov 2010 16:53:12 +0000 (01:53 +0900)]
ext3: Add journal error check in resize.c
Check return value of ext3_journal_get_write_access() and
ext3_journal_dirty_metadata().
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Joe Perches [Wed, 24 Nov 2010 02:49:54 +0000 (18:49 -0800)]
quota: Use %pV and __attribute__((format (printf in __quota_error and fix fallout
Use %pV in __quota_error so a single printk can not be
interleaved with other logging messages.
Add __attribute__((format (printf, 3, 4))) so format
and arguments can be verified by compiler.
Make sure printk formats and arguments match.
Block # needed a pointer dereference.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Lukas Czerner [Mon, 22 Nov 2010 11:29:18 +0000 (12:29 +0100)]
ext3: Add FITRIM handling
The ioctl takes fstrim_range structure (defined in include/linux/fs.h) as an
argument specifying a range of filesystem to trim and the minimum size of an
continguous extent to trim. After the FITRIM is done, the number of bytes
passed from the filesystem down the block stack to the device for potential
discard is stored in fstrim_range.len. This number is a maximum discard amount
from the storage device's perspective, because FITRIM called repeatedly will
keep sending the same sectors for discard. fstrim_range.len will report the
same potential discard bytes each time, but only sectors which had been written
to between the discards would actually be discarded by the storage device.
Further, the kernel block layer reserves the right to adjust the discard ranges
to fit raid stripe geometry, non-trim capable devices in a LVM setup, etc.
These reductions would not be reflected in fstrim_range.len.
Thus fstrim_range.len can give the user better insight on how much storage
space has potentially been released for wear-leveling, but it needs to be one
of only one criteria the userspace tools take into account when trying to
optimize calls to FITRIM.
Thanks to Greg Freemyer <greg.freemyer@gmail.com> for better commit message.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Lukas Czerner [Mon, 22 Nov 2010 11:29:17 +0000 (12:29 +0100)]
ext3: Add batched discard support for ext3
Walk through allocation groups and trim all free extents. It can be
invoked through FITRIM ioctl on the file system. The main idea is to
provide a way to trim the whole file system if needed, since some SSD's
may suffer from performance loss after the whole device was filled (it
does not mean that fs is full!).
It search for free extents in allocation groups specified by Byte range
start -> start+len. When the free extent is within this range, blocks are
marked as used and then trimmed. Afterwards these blocks are marked as
free in per-group bitmap.
[JK: Fixed up error handling and trimming of a single group]
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Eric Sandeen [Mon, 10 Jan 2011 18:03:35 +0000 (13:03 -0500)]
ext4: don't pass entire map to check_eofblocks_fl
Since check_eofblocks_fl() only uses the m_lblk portion of the map
structure, we may as well pass that directly, rather than passing the
entire map, which IMHO obfuscates what parameters check_eofblocks_fl()
cares about. Not a big deal, but seems tidier and less confusing, to
me.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:51:28 +0000 (12:51 -0500)]
ext4: fix memory leak in ext4_free_branches
Commit
40389687 moved a call to ext4_forget() out of
ext4_free_branches and let ext4_free_blocks() handle calling
bforget(). But that change unfortunately did not replace the call to
ext4_forget() with brelse(), which was needed to drop the in-use count
of the indirect block's buffer head, which lead to a memory leak when
deleting files that used indirect blocks. Fix this.
Thanks to Hugh Dickins for pointing this out.
Cc: stable@kernel.org
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:47:07 +0000 (12:47 -0500)]
ext4: remove ext4_mb_return_to_preallocation()
This function was never implemented, except for a BUG_ON which was
tripping when ext4 is run without a journal. The problem is that
although the comment asserts that "truncate (which is the only way to
free block) discards all preallocations", ext4_free_blocks() is also
called in various error recovery paths when blocks have been
allocated, but for various reasons, we were not able to use those data
blocks (for example, because we ran out of memory while trying to
manipulate the extent tree, or some other similar situation).
In addition to the fact that this function isn't implemented except
for the incorrect BUG_ON, the single caller of this function,
ext4_free_blocks(), doesn't use it all if the journal is enabled.
So remove the (stub) function entirely for now. If we decide it's
better to add it back, it's only going to be useful with a relatively
large number of code changes anyway.
Google-Bug-Id:
3236408
Cc: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Jiaying Zhang [Mon, 10 Jan 2011 17:47:05 +0000 (12:47 -0500)]
ext4: flush the i_completed_io_list during ext4_truncate
Ted first found the bug when running 2.6.36 kernel with dioread_nolock
mount option that xfstests #13 complained about wrong file size during fsck.
However, the bug exists in the older kernels as well although it is
somehow harder to trigger.
The problem is that ext4_end_io_work() can happen after we have truncated an
inode to a smaller size. Then when ext4_end_io_work() calls
ext4_convert_unwritten_extents(), we may reallocate some blocks that have
been truncated, so the inode size becomes inconsistent with the allocated
blocks.
The following patch flushes the i_completed_io_list during truncate to reduce
the risk that some pending end_io requests are executed later and convert
already truncated blocks to initialized.
Note that although the fix helps reduce the problem a lot there may still
be a race window between vmtruncate() and ext4_end_io_work(). The fundamental
problem is that if vmtruncate() is called without either i_mutex or i_alloc_sem
held, it can race with an ongoing write request so that the io_end request is
processed later when the corresponding blocks have been truncated.
Ted and I have discussed the problem offline and we saw a few ways to fix
the race completely:
a) We guarantee that i_mutex lock and i_alloc_sem write lock are both hold
whenever vmtruncate() is called. The i_mutex lock prevents any new write
requests from entering writeback and the i_alloc_sem prevents the race
from ext4_page_mkwrite(). Currently we hold both locks if vmtruncate()
is called from do_truncate(), which is probably the most common case.
However, there are places where we may call vmtruncate() without holding
either i_mutex or i_alloc_sem. I would like to ask for other people's
opinions on what locks are expected to be held before calling vmtruncate().
There seems a disagreement among the callers of that function.
b) We change the ext4 write path so that we change the extent tree to contain
the newly allocated blocks and update i_size both at the same time --- when
the write of the data blocks is completed.
c) We add some additional locking to synchronize vmtruncate() and
ext4_end_io_work(). This approach may have performance implications so we
need to be careful.
All of the above proposals may require more substantial changes, so
we may consider to take the following patch as a bandaid.
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:46:59 +0000 (12:46 -0500)]
ext4: add error checking to calls to ext4_handle_dirty_metadata()
Call ext4_std_error() in various places when we can't bail out
cleanly, so the file system can be marked as in error.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Rabin Vincent [Wed, 8 Dec 2010 05:38:01 +0000 (11:08 +0530)]
ux500: allow 5500 and 8500 to be built together
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Rabin Vincent [Wed, 8 Dec 2010 05:38:00 +0000 (11:08 +0530)]
ux500: modem_irq is only for 5500
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
[Modified to hit the right file]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Rabin Vincent [Wed, 8 Dec 2010 05:37:59 +0000 (11:07 +0530)]
ux500: dynamic SOC detection
Dynamically detect the DBx500 SOC an revision based on the ASIC ID.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Rabin Vincent [Wed, 8 Dec 2010 05:37:58 +0000 (11:07 +0530)]
ux500: rename MOP board Kconfig
Rename the MOP board Kconfig entries to the same name as the machine
type, so that the machine_is_*() macros work correctly.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
[Updated to match changes in the tree]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Rabin Vincent [Wed, 8 Dec 2010 05:37:57 +0000 (11:07 +0530)]
ux500: remove build-time changing macros
To allow the possiblity of building U8500 and U5500 support in the same
image.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
[Rebased to latest changes in Russells tree]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Jan Kara [Mon, 10 Jan 2011 17:30:39 +0000 (12:30 -0500)]
ext4: fix trimming of a single group
When ext4_trim_fs() is called to trim a part of a single group, the
logic will wrongly set last block of the interval to 'len' instead
of 'first_block + len'. Thus a shorter interval is possibly trimmed.
Fix it.
CC: Lukas Czerner <lczerner@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Andrew Morton [Mon, 10 Jan 2011 17:30:17 +0000 (12:30 -0500)]
ext4: fix uninitialized variable in ext4_register_li_request
fs/ext4/super.c: In function 'ext4_register_li_request':
fs/ext4/super.c:2936: warning: 'ret' may be used uninitialized in this function
It looks buggy to me, too.
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:29:43 +0000 (12:29 -0500)]
ext4: dynamically allocate the jbd2_inode in ext4_inode_info as necessary
Replace the jbd2_inode structure (which is 48 bytes) with a pointer
and only allocate the jbd2_inode when it is needed --- that is, when
the file system has a journal present and the inode has been opened
for writing. This allows us to further slim down the ext4_inode_info
structure.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:18:25 +0000 (12:18 -0500)]
ext4: drop i_state_flags on architectures with 64-bit longs
We can store the dynamic inode state flags in the high bits of
EXT4_I(inode)->i_flags, and eliminate i_state_flags. This saves 8
bytes from the size of ext4_inode_info structure, which when
multiplied by the number of the number of in the inode cache, can save
a lot of memory.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:13:42 +0000 (12:13 -0500)]
ext4: reorder ext4_inode_info structure elements to remove unneeded padding
By reordering the elements in the ext4_inode_info structure, we can
reduce the padding needed on an x86_64 system by 16 bytes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:13:26 +0000 (12:13 -0500)]
ext4: drop ec_type from the ext4_ext_cache structure
We can encode the ec_type information by using ee_len == 0 to denote
EXT4_EXT_CACHE_NO, ee_start == 0 to denote EXT4_EXT_CACHE_GAP, and if
neither is true, then the cache type must be EXT4_EXT_CACHE_EXTENT.
This allows us to reduce the size of ext4_ext_inode by another 8
bytes. (ec_type is 4 bytes, plus another 4 bytes of padding)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:13:03 +0000 (12:13 -0500)]
ext4: use ext4_lblk_t instead of sector_t for logical blocks
This fixes a number of places where we used sector_t instead of
ext4_lblk_t for logical blocks, which for ext4 are still 32-bit data
types. No point wasting space in the ext4_inode_info structure, and
requiring 64-bit arithmetic on 32-bit systems, when it isn't
necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:12:36 +0000 (12:12 -0500)]
ext4: replace i_delalloc_reserved_flag with EXT4_STATE_DELALLOC_RESERVED
Remove the short element i_delalloc_reserved_flag from the
ext4_inode_info structure and replace it a new bit in i_state_flags.
Since we have an ext4_inode_info for every ext4 inode cached in the
inode cache, any savings we can produce here is a very good thing from
a memory utilization perspective.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Kazuya Mio [Mon, 10 Jan 2011 17:12:28 +0000 (12:12 -0500)]
ext4: fix 32bit overflow in ext4_ext_find_goal()
ext4_ext_find_goal() returns an ideal physical block number that the block
allocator tries to allocate first. However, if a required file offset is
smaller than the existing extent's one, ext4_ext_find_goal() returns
a wrong block number because it may overflow at
"block - le32_to_cpu(ex->ee_block)". This patch fixes the problem.
ext4_ext_find_goal() will also return a wrong block number in case
a file offset of the existing extent is too big. In this case,
the ideal physical block number is fixed in ext4_mb_initialize_context(),
so it's no problem.
reproduce:
# dd if=/dev/zero of=/mnt/mp1/tmp bs=127M count=1 oflag=sync
# dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 seek=1 oflag=sync
# filefrag -v /mnt/mp1/file
Filesystem type is: ef53
File size of /mnt/mp1/file is
1048576 (256 blocks, blocksize 4096)
ext logical physical expected length flags
0 128 67456 128 eof
/mnt/mp1/file: 2 extents found
# rm -rf /mnt/mp1/tmp
# echo $((512*4096)) > /sys/fs/ext4/loop0/mb_stream_req
# dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 oflag=sync conv=notrunc
result (linux-2.6.37-rc2 + ext4 patch queue):
# filefrag -v /mnt/mp1/file
Filesystem type is: ef53
File size of /mnt/mp1/file is
1048576 (256 blocks, blocksize 4096)
ext logical physical expected length flags
0 0 33280 128
1 128 67456 33407 128 eof
/mnt/mp1/file: 2 extents found
result(apply this patch):
# filefrag -v /mnt/mp1/file
Filesystem type is: ef53
File size of /mnt/mp1/file is
1048576 (256 blocks, blocksize 4096)
ext logical physical expected length flags
0 0 66560 128
1 128 67456 66687 128 eof
/mnt/mp1/file: 2 extents found
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Namhyung Kim [Mon, 10 Jan 2011 17:11:16 +0000 (12:11 -0500)]
ext4: add more error checks to ext4_mkdir()
Check return value of ext4_journal_get_write_access,
ext4_journal_dirty_metadata and ext4_mark_inode_dirty. Move brelse()
under 'out_stop' to release bh properly in case of journal error.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Eric Paris [Mon, 10 Jan 2011 17:11:00 +0000 (12:11 -0500)]
ext4: ext4_ext_migrate should use NULL not 0
ext4_ext_migrate() calls ext4_new_inode() and passes 0 instead of a pointer
to a struct qstr. This patch uses NULL, to make it obvious to the caller
that this was a pointer.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:10:55 +0000 (12:10 -0500)]
ext4: Use ext4_error_file() to print the pathname to the corrupted inode
Where the file pointer is available, use ext4_error_file() instead of
ext4_error_inode().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Dan Carpenter [Mon, 10 Jan 2011 17:10:50 +0000 (12:10 -0500)]
ext4: use IS_ERR() to check for errors in ext4_error_file
d_path() returns an ERR_PTR and it doesn't return NULL. This is in
ext4_error_file() and no one actually calls ext4_error_file().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Dan Carpenter [Mon, 10 Jan 2011 17:10:44 +0000 (12:10 -0500)]
ext4: test the correct variable in ext4_init_pageio()
This is a copy and paste error. The intent was to check
"io_page_cachep". We tested "io_page_cachep" earlier.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Wang Sheng-Hui [Mon, 10 Jan 2011 17:10:37 +0000 (12:10 -0500)]
ext2: remove dead code in ext2_xattr_get
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Wang Sheng-Hui <crosslonelyover@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Wang Sheng-Hui [Mon, 10 Jan 2011 17:10:30 +0000 (12:10 -0500)]
ext2,ext3,ext4: clarify comment for extN_xattr_set_handle
Signed-off-by: Wang Sheng-Hui <crosslonelyover@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Mon, 10 Jan 2011 17:10:07 +0000 (12:10 -0500)]
ext4: clean up ext4_xattr_list()'s error code checking and return strategy
Any time you see code that tries to add error codes together, you
should want to claw your eyes out...
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Lukas Czerner [Mon, 10 Jan 2011 17:09:59 +0000 (12:09 -0500)]
ext4: remove warning message from ext4_issue_discard helper
ext4_issue_discard is supposed to be helper for calling discard, however
in case that underlying device does not support discard it prints out
the warning message and clears the DISCARD t_mount_opt flag. Since it
can be (and is) used by others, it should not do anything and let the
caller to handle the error case.
This commit removes warning message and flag setting from
ext4_issue_discard and use it just in place where it is really needed
(release_blocks_on_commit). FITRIM ioctl should not set any flags nor it
should print out warning messages, so get rid of the warning as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Lukas Czerner [Mon, 10 Jan 2011 17:04:55 +0000 (12:04 -0500)]
ext4: fix possible overflow in ext4_trim_fs()
When determining last group through ext4_get_group_no_and_offset() the
result may be wrong in cases when range->start and range-len are too
big, because it may overflow when summing up those two numbers.
Fix that by checking range->len and limit its value to
ext4_blocks_count(). This commit was tested by myself with expected
result.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Mattia Dongili [Sat, 8 Jan 2011 09:47:29 +0000 (18:47 +0900)]
sony-laptop: support new hotkeys on the P, Z and EC series
Add new mappings for assist, VAIO, zoom and eject buttons present on
refurbished P, Z and EC models.
Reported-by: Gyorgy Jeney <nog.lkml@gmail.com>
Reported-by: Stephan Mueller <smueller@chronox.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Linus Torvalds [Mon, 10 Jan 2011 16:57:46 +0000 (08:57 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (44 commits)
hwmon: Support for Dallas Semiconductor DS620
hwmon: driver for Sensirion SHT21 humidity and temperature sensor
hwmon: Add humidity attribute to sysfs ABI
hwmon: sysfs ABI updates
hwmon: (via-cputemp) sync hotplug handling with coretemp/pkgtemp
hwmon: (lm95241) Rewrite to avoid using macros
hwmon: (applesmc) Fix checkpatch errors and fix value range checks
hwmon: (applesmc) Update copyright information
hwmon: (applesmc) Silence driver
hwmon: (applesmc) Simplify feature sysfs handling
hwmon: (applesmc) Dynamic creation of fan files
hwmon: (applesmc) Extract all features generically
hwmon: (applesmc) Handle new temperature format
hwmon: (applesmc) Dynamic creation of temperature files
hwmon: (applesmc) Introduce a register lookup table
hwmon: (applesmc) Use pr_fmt and pr_<level>
hwmon: (applesmc) Relax the severity of device init failure
hwmon: (applesmc) Add MacBookAir3,1(3,2) support
hwmon: (w83627hf) Use pr_fmt and pr_<level>
hwmon: (w83627ehf) Use pr_fmt and pr_<level>
...
Linus Torvalds [Mon, 10 Jan 2011 16:57:03 +0000 (08:57 -0800)]
Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits)
of/flattree: forward declare struct device_node in of_fdt.h
ipmi: explicitly include of_address.h and of_irq.h
sparc: explicitly cast negative phandle checks to s32
powerpc/405: Fix missing #{address,size}-cells in i2c node
powerpc/5200: dts: refactor dts files
powerpc/5200: dts: Change combatible strings on localbus
powerpc/5200: dts: remove unused properties
powerpc/5200: dts: rename nodes to prepare for refactoring dts files
of/flattree: Update dtc to current mainline.
of/device: Don't register disabled devices
powerpc/dts: fix syntax bugs in bluestone.dts
of: Fixes for OF probing on little endian systems
of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF
of/flattree: Add of_flat_dt_match() helper function
of_serial: explicitly include of_irq.h
of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree
of/flattree: Reorder unflatten_dt_node
of/flattree: Refactor unflatten_dt_node
of/flattree: Add non-boottime device tree functions
of/flattree: Add Kconfig for EARLY_FLATTREE
...
Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.
Mark Brown [Mon, 10 Jan 2011 14:37:02 +0000 (14:37 +0000)]
platform/x86: Consistently select LEDS Kconfig options
Currently the x86 platform devices are not consistent about selecting
or depending on the LEDs Kconfig variables, and this inconsistency
leads to Kconfig getting upset and refusing to offer LEDs (even on
non-x86 platforms):
drivers/platform/x86/Kconfig:422:error: recursive dependency detected!
drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI
drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI
drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS
drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI
Fix this by always selecting rather than depending on the symbols as
slightly more drivers use this approach already and it seems more
user friendly.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Randy Dunlap [Sun, 9 Jan 2011 03:56:44 +0000 (19:56 -0800)]
sony-laptop: fix sparse non-ANSI function warning
Fix sparse warning for non-ANSI function declaration:
drivers/platform/x86/sony-laptop.c:1134:35: warning: non-ANSI function declaration of function 'sony_nc_rfkill_update'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Randy Dunlap [Sun, 9 Jan 2011 03:55:40 +0000 (19:55 -0800)]
intel_ips: fix sparse non-ANSI function warning
Fix sparse warning for non-ANSI function declaration:
drivers/platform/x86/intel_ips.c:1477:25: warning: non-ANSI function declaration of function 'ips_link_to_i915_driver'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Alexey Dobriyan [Mon, 10 Jan 2011 06:18:25 +0000 (08:18 +0200)]
headers: kobject.h redux
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Mon, 10 Jan 2011 06:17:10 +0000 (08:17 +0200)]
headers: path.h redux
Remove path.h from sched.h and other files.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 10 Jan 2011 16:48:46 +0000 (08:48 -0800)]
Merge branch 'stable/bug-fixes' of git://git./linux/kernel/git/konrad/xen
* 'stable/bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/event: validate irq before get evtchn by irq
xen/fb: fix potential memory leak
xen/fb: fix xenfb suspend/resume race.
xen: disable ACPI NUMA for PV guests
xen/irq: Cleanup the find_unbound_irq
Linus Torvalds [Mon, 10 Jan 2011 16:48:29 +0000 (08:48 -0800)]
Merge branch 'stable/generic' of git://git./linux/kernel/git/konrad/xen
* 'stable/generic' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: HVM X2APIC support
apic: Move hypervisor detection of x2apic to hypervisor.h
Linus Torvalds [Mon, 10 Jan 2011 16:38:01 +0000 (08:38 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
slub: Fix a crash during slabinfo -v
tracing/slab: Move kmalloc tracepoint out of inline code
slub: Fix slub_lock down/up imbalance
slub: Fix build breakage in Documentation/vm
slub tracing: move trace calls out of always inlined functions to reduce kernel code size
slub: move slabinfo.c to tools/slub/slabinfo.c
Linus Torvalds [Mon, 10 Jan 2011 16:29:25 +0000 (08:29 -0800)]
Merge branch 'misc' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
Documentation/kbuild: add info that 'choice' can have a symbol name
kbuild: add numeric --set-val option to scripts/config
headers_check: Fix warning text
headers_check: better search for functions in headers
scripts/coccinelle: update for compatability with Coccinelle 0.2.4
tags: put function prototypes back!
Kconfig: fix single letter command in scripts/config
gitignore: add scripts/recordmcount
Linus Torvalds [Mon, 10 Jan 2011 16:28:38 +0000 (08:28 -0800)]
Merge branch 'packaging' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
deb-pkg: s/hdr/kernel_headers_/ && s/header/libc_headers_/
deb-pkg: Make deb-pkg generate a seperate linux-libc-dev deb
kbuild: create linux-headers package in deb-pkg
kbuild, deb-pkg: support overriding userland architecture
kbuild, deb-pkg: select userland architecture based on UTS_MACHINE
kbuild, deb-pkg: Fix build with paranoid umask
Linus Torvalds [Mon, 10 Jan 2011 16:28:17 +0000 (08:28 -0800)]
Merge branch 'kconfig' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
nconf: handle comment entries within choice/endchoice
kconfig: fix warning
kconfig: Make expr_copy() take a const argument
kconfig: simplify select-with-unmet-direct-dependency warning
kconfig: add more S_INT and S_HEX consistency checks
kconfig: fix `zconfdebug' extern declaration
kconfig/conf: merge duplicate switch's case
kconfig: fix typos
kbuild/gconf: add dummy inline for bind_textdomain_codeset()
kbuild/nconf: fix spaces damage
kconfig: nuke second argument of conf_write_symbol()
kconfig: do not define AUTOCONF_INCLUDED
kconfig: the day kconfig warns about "select"-abuse has come
Linus Torvalds [Mon, 10 Jan 2011 16:27:52 +0000 (08:27 -0800)]
Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
mkuboot.sh: Fail if mkimage is missing
gen_init_cpio: checkpatch fixes
gen_init_cpio: Avoid race between call to stat() and call to open()
modpost: Fix address calculation in reloc_location()
Make fixdep error handling more explicit
checksyscalls: Fix stand-alone usage
modpost: Put .zdebug* section on white list
kbuild: fix interaction of CONFIG_IKCONFIG and KCONFIG_CONFIG
kbuild: export linux/{a.out,kvm,kvm_para}.h on headers_install_all
kbuild: introduce HDR_ARCH_LIST for headers_install_all
headers_install: check exit status of unifdef
gen_init_cpio: remove leading `/' from file names
scripts/genksyms: fix header usage
fixdep: use hash table instead of a single array
Linus Torvalds [Mon, 10 Jan 2011 16:22:33 +0000 (08:22 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
pata_platform: Remove CONFIG_HAVE_PATA_PLATFORM's dependencies.
pata_hpt37x: actually limit HPT370 to UltraDMA/66
pata_hpt3x2n: coding style cleanup
pata_hpt37x: coding style cleanup
pata_hpt366: coding style cleanup
pata_hpt3x2n: calculate average f_CNT
pata_hpt3x2n: clarify about HPT371N support
pata_hpt{37x|3x2n}: SATA mode filtering
[libata] avoid needlessly passing around ptr to SCSI completion func
[libata] new driver acard_ahci, for ATP8620 host controller
Jiri Pirko [Mon, 10 Jan 2011 16:14:23 +0000 (14:14 -0200)]
perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail
on ppc64:
/usr/include/bits/local_lim.h:#define PTHREAD_STACK_MIN 131072
therefore following set of commands:
gives:
perf.2.6.37test: builtin-sched.c:493: create_tasks: Assertion `!(err)' failed.
So make sure we do not set stack size lower than PTHREAD_STACK_MIN.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <
20110110160417.GB2685@psychotron.brq.redhat.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Mon, 10 Jan 2011 16:15:37 +0000 (08:15 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (34 commits)
HID: roccat: Update sysfs attribute doc
HID: roccat: don't use #pragma pack
HID: roccat: Add support for Roccat Kone[+] v2
HID: roccat: reduce number of functions in kone and pyra drivers
HID: roccat: declare meaning of pack pragma usage in driver headers
HID: roccat: use class for char device for sysfs attribute creation
sysfs: Introducing binary attributes for struct class
HID: hidraw: add compatibility ioctl() for 32-bit applications.
HID: hid-picolcd: Fix memory leak in picolcd_debug_out_report()
HID: picolcd: fix misuse of logical operation in place of bitop
HID: usbhid: base runtime PM on modern API
HID: replace offsets values with their corresponding BTN_* defines
HID: hid-mosart: support suspend/resume
HID: hid-mosart: ignore buttons report
HID: hid-picolcd: don't use flush_scheduled_work()
HID: simplify an index check in hid_lookup_collection
HID: Hoist assigns from ifs
HID: Remove superfluous __inline__
HID: Use vzalloc for vmalloc/memset(,0...)
HID: Add and use hid_<level>: dev_<level> equivalents
...
Linus Torvalds [Mon, 10 Jan 2011 16:14:53 +0000 (08:14 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
spi / PM: Support dev_pm_ops
PM: Prototype the pm_generic_ operations
PM / Runtime: Generic resume shouldn't set RPM_ACTIVE unconditionally
PM: Use dev_name() in core device suspend and resume routines
PM: Permit registration of parentless devices during system suspend
PM: Replace the device power.status field with a bit field
PM: Remove redundant checks from core device resume routines
PM: Use a different list of devices for each stage of device suspend
PM: Avoid compiler warning in pm_noirq_op()
PM: Use pm_wakeup_pending() in __device_suspend()
PM / Wakeup: Replace pm_check_wakeup_events() with pm_wakeup_pending()
PM: Prevent dpm_prepare() from returning errors unnecessarily
PM: Fix references to basic-pm-debugging.txt in drivers-testing.txt
PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3)
PM / Hibernate: When failed, in_suspend should be reset
PM / Hibernate: hibernation_ops->leave should be checked too
Freezer: Fix a race during freezing of TASK_STOPPED tasks
PM: Use proper ccflag flag in kernel/power/Makefile
PM / Runtime: Fix comments to match runtime callback code
Linus Torvalds [Mon, 10 Jan 2011 16:14:02 +0000 (08:14 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: use split transaction timeout only for split transactions
firewire: ohci: consolidate context status flags
firewire: ohci: cache the context run bit
firewire: ohci: flush AT contexts after bus reset - addendum
firewire: ohci: flush AT contexts after bus reset for OHCI 1.2
firewire: net: set carrier state at ifup
firewire: net: add carrier detection
firewire: net: ratelimit error messages
firewire: ohci: restart iso DMA contexts on resume from low power mode
firewire: ohci: restore GUID on resume.
firewire: ohci: use common buffer for self IDs and AR descriptors
firewire: ohci: optimize iso context checks in the interrupt handler
firewire: make PHY packet header format consistent
firewire: ohci: properly clear posted write errors
firewire: ohci: flush MMIO writes in the interrupt handler
firewire: ohci: fix AT context initialization error handling
firewire: ohci: Asynchronous Reception rewrite
firewire: core: Update WARN uses
firewire: nosy: char device is not seekable
Linus Torvalds [Mon, 10 Jan 2011 15:50:40 +0000 (07:50 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: unfold nilfs_dat_inode function
nilfs2: do not pass sbi to functions which can get it from inode
nilfs2: get rid of nilfs_mount_options structure
nilfs2: simplify nilfs_mdt_freeze_buffer
nilfs2: get rid of loaded flag from nilfs object
nilfs2: fix a checkpatch error in page.c
nilfs2: fiemap support
nilfs2: mark buffer heads as delayed until the data is written to disk
nilfs2: call nilfs_error inside bmap routines
fs/nilfs2/super.c: Use printf extension %pV
MAINTAINERS: add nilfs2 git tree entry
Linus Torvalds [Mon, 10 Jan 2011 15:47:11 +0000 (07:47 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: use CreationTime like an i_generation field
cifs: switch cifs_open and cifs_create to use CIFSSMBUnixSetFileInfo
cifs: show "acl" in DebugData Features when it's compiled in
cifs: move "ntlmssp" and "local_leases" options out of experimental code
cifs: replace some hardcoded values with preprocessor constants
cifs: remove unnecessary locking around sequence_number
[CIFS] Fix minor merge conflict in fs/cifs/dir.c
CIFS: Simplify cifs_open code
CIFS: Simplify non-posix open stuff (try #2)
CIFS: Add match_port check during looking for an existing connection (try #4)
CIFS: Simplify ipv*_connect functions into one (try #4)
cifs: Support NTLM2 session security during NTLMSSP authentication [try #5]
cifs: don't overwrite dentry name in d_revalidate
Joe Jin [Fri, 7 Jan 2011 06:50:12 +0000 (14:50 +0800)]
xen/event: validate irq before get evtchn by irq
When retrieving the event channel number from irq, the irq
number may not be valid under some conditions.
So far that can be when we suspend/resume and irq ends with -1.
Validate and return sanitized irq and provide diagnostics information.
[v3: added unlikely on the WARN path]
[v2: reworded the commit message]
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Joe Jin [Fri, 7 Jan 2011 10:20:54 +0000 (18:20 +0800)]
xen/fb: fix potential memory leak
This patch fixes a potential memory leak when xenfb connect to
the backend fails.
Thanks for Ian's review and comments.
[v2: reworded the commit message a bit]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Joe Jin [Fri, 7 Jan 2011 10:17:17 +0000 (18:17 +0800)]
xen/fb: fix xenfb suspend/resume race.
When migrating guests over a long period we hit this:
<1>BUG: unable to handle kernel paging request at
0000000b819fdb98
<1>IP: [<
ffffffff812a588f>] notify_remote_via_irq+0x13/0x34
<4>PGD
94b10067 PUD 0
<0>Oops: 0000 [#1] SMP
.. snip..
Call Trace:
[<
ffffffff812712c9>] xenfb_send_event+0x5c/0x5e
[<
ffffffff8100ea5f>] ? xen_restore_fl_direct_end+0x0/0x1
[<
ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18
[<
ffffffff812714ee>] xenfb_refresh+0x1b1/0x1d7
[<
ffffffff81270568>] ? sys_imageblit+0x1ac/0x458
[<
ffffffff81271786>] xenfb_imageblit+0x2f/0x34
[<
ffffffff8126a3e5>] soft_cursor+0x1b5/0x1c8
[<
ffffffff8126a137>] bit_cursor+0x4b6/0x4d7
[<
ffffffff8100ea5f>] ? xen_restore_fl_direct_end+0x0/0x1
[<
ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18
[<
ffffffff81269c81>] ? bit_cursor+0x0/0x4d7
[<
ffffffff812656b7>] fb_flashcursor+0xff/0x111
[<
ffffffff812655b8>] ? fb_flashcursor+0x0/0x111
[<
ffffffff81071812>] worker_thread+0x14d/0x1ed
[<
ffffffff81075a8c>] ? autoremove_wake_function+0x0/0x3d
[<
ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18
[<
ffffffff810716c5>] ? worker_thread+0x0/0x1ed
[<
ffffffff810756e3>] kthread+0x6e/0x76
[<
ffffffff81012dea>] child_rip+0xa/0x20
[<
ffffffff81011fd1>] ? int_ret_from_sys_call+0x7/0x1b
[<
ffffffff8101275d>] ? retint_restore_args+0x5/0x6
[<
ffffffff81012de0>] ? child_rip+0x0/0x20
Code: 6b ff 0c 8b 87 a4 db 9f 81 66 85 c0 74 08 0f b7 f8 e8 3b ff ff ff c9
c3 55 48 89 e5 48 83 ec 10 0f 1f 44 00 00 89 ff 48 6b ff 0c <8b> 87 a4 db 9f
81 66 85 c0 74 14 48 8d 75 f0 0f b7 c0 bf 04 00
RIP [<
ffffffff812a588f>] notify_remote_via_irq+0x13/0x34
RSP <
ffff8800e7bf7bd0>
CR2:
0000000b819fdb98
---[ end trace
098b4b74827595d0 ]---
The root cause of the panic is the race between the resume and reconnect to the backend.
Clearing the 'update_wanted' flag of xenfb before disconnecting from the
backend fixes this issue.
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Ian Campbell [Fri, 3 Dec 2010 09:54:03 +0000 (09:54 +0000)]
xen: disable ACPI NUMA for PV guests
Xen does not currently expose PV-NUMA information to PV
guests. Therefore disable NUMA for the time being to prevent the
kernel picking up on an host-level NUMA information which it might
come across in the firmware.
[ Added comment - Jeremy ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Linus Torvalds [Mon, 10 Jan 2011 15:46:26 +0000 (07:46 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: sanitize work_start() in lowcomms.c
dlm: reduce cond_resched during send
dlm: use TCP_NODELAY
dlm: Use cmwq for send and receive workqueues
dlm: Handle application limited situations properly.
Linus Torvalds [Mon, 10 Jan 2011 15:43:54 +0000 (07:43 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix ioctl ABI
fuse: allow batching of FORGET requests
fuse: separate queue for FORGET requests
fuse: ioctl cleanup
Fix up trivial conflict in fs/fuse/inode.c due to RCU lookup having done
the RCU-freeing of the inode in fuse_destroy_inode().
Randy Dunlap [Sun, 9 Jan 2011 03:40:33 +0000 (19:40 -0800)]
pipe_fs_i.h: fix kernel-doc warning
Fix kernel-doc notation warnings in pipe_fs_i.h:
Warning(include/linux/pipe_fs_i.h:58): No description found for parameter 'buffers'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This page took 0.05821 seconds and 5 git commands to generate.