Masahiro Yamada [Fri, 26 Feb 2016 07:16:07 +0000 (16:16 +0900)]
ARM: uniphier: add missing of_node_put()
This node pointer is allocated by of_find_compatible_node() in this
function. It should be put before exitting this function.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Olof Johansson [Sun, 13 Mar 2016 01:10:20 +0000 (17:10 -0800)]
Merge tag 'samsung-soc-4.6-2' of git://git./linux/kernel/git/krzk/linux into next/soc
Samsung Exynos (and older platforms) improvements for v4.6:
1. Split out Exynos PMU driver implementation from arm/mach-exynos
to the drivers/soc/samsung which will allow re-use of it on ARM64.
2. Use generic DT cpufreq driver on Exynos542x/5800.
3. Minor cleanups.
* tag 'samsung-soc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c24xx: Avoid warning for inb/outb
ARM: SAMSUNG: Remove unused register offset definition
ARM: EXYNOS: Cleanup header files inclusion
drivers: soc: samsung: Enable COMPILE_TEST
MAINTAINERS: Add maintainers entry for drivers/soc/samsung
drivers: soc: Add support for Exynos PMU driver
ARM: EXYNOS: Split up exynos5420 SoC specific PMU data
ARM: EXYNOS: Split up exynos5250 SoC specific PMU data
ARM: EXYNOS: Split up exynos4 SoC specific PMU data
ARM: EXYNOS: Split up exynos3250 SoC specific PMU data
ARM: EXYNOS: Move pmu specific headers under "linux/soc/samsung"
ARM: EXYNOS: Correct header comment in Kconfig file
ARM: EXYNOS: Use generic cpufreq driver for Exynos5422/5800
ARM: EXYNOS: Use generic cpufreq driver for Exynos5420
ARM: s3c64xx: use "depends on" instead of "if" after prompt
ARM: plat-samsung: use to_platform_device()
ARM: EXYNOS: Code cleanup in map.h
ARM: EXYNOS: Remove unused static mapping of CMU for exynos5
Signed-off-by: Olof Johansson <olof@lixom.net>
Arnd Bergmann [Wed, 2 Mar 2016 22:36:17 +0000 (23:36 +0100)]
Merge tag 'stm32-soc-for-v4.6-2' of git://git./linux/kernel/git/mcoquelin/stm32 into next/soc
Merge "STM32 SoC updates for v4.6 #2" from Maxime Coquelin:
Highlights:
-----------
- Add a new stm32f469 SoC
* tag 'stm32-soc-for-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
ARM: stm32: Identify a new SoC - STM32F469
Arnd Bergmann [Wed, 2 Mar 2016 22:32:24 +0000 (23:32 +0100)]
Merge tag 'omap-for-v4.6/soc-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/soc
Merge "omap soc changes for v4.6 merge window" from Tony Lindgren:
SoC related changes for omaps for v4.6 merge window:
- Enable runtime revision detection for dra7 to avoid multiple dts
files for various variants
- Add dma_slave_map for omap1/2/3 legacy mode booting
- Add RTC interconnect target data for ti81xx and am43x
- Add custom reset handler for PCIeSS
- Add eDMA interconnect target data for dra7
* tag 'omap-for-v4.6/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot
ARM: OMAP1: DMA: Provide dma_slave_map to omap-dma
ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls
ARM: AM43XX: hwmod: Add rtc hwmod
ARM: DRA7: hwmod: Add reset data for PCIe
ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
ARM: OMAP2+: hwmod data: Add SSI data for omap36xx
Arnd Bergmann [Wed, 2 Mar 2016 22:30:17 +0000 (23:30 +0100)]
Merge tag 'imx-soc-4.6' of git://git./linux/kernel/git/shawnguo/linux into next/soc
Merge "i.MX SoC update for 4.6" from Shawn Guo:
- Enable big endian mode support for i.MX platform
- Add support for i.MX6QP SoC which is the latest i.MX6 family addition
- Add basic suspend/resume support for i.MX25
- A couple of i.MX7D support updates
- A few random code cleanups
* tag 'imx-soc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Make reset_control_ops const
ARM: imx: Do L2 errata only if the L2 cache isn't enabled
ARM: imx: select ARM_CPU_SUSPEND only for imx6
ARM: mx25: Add basic suspend/resume support
ARM: imx: Add msl code support for imx6qp
ARM: imx: enable big endian mode
ARM: imx: use endian-safe readl/readw/writel/writew
ARM: imx7d: correct chip version information
ARM: imx: select HAVE_ARM_ARCH_TIMER if selected i.MX7D
ARM: imx6: fix cleanup path in imx6q_suspend_init()
Arnd Bergmann [Tue, 23 Feb 2016 14:39:38 +0000 (15:39 +0100)]
ARM: at91: avoid defining CONFIG_* symbols in source code
In an invalid randconfig build (fixed by another patch),
I ran across this warning:
arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]
#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
As Russell pointed out, we should never #define a macro starting
with CONFIG_ in a source file, as that is rather confusing.
This renames the macro to avoid the symbol clash.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tony Lindgren [Tue, 1 Mar 2016 17:59:38 +0000 (09:59 -0800)]
Merge tag 'for-v4.6/omap-hwmod-b' of git://git./linux/kernel/git/pjw/omap-pending into omap-for-v4.6/soc
ARM: OMAP2+: second set of hwmod changes for v4.6
These patches add RTC support for the AM43xx, and add support for
the DRA7xx eDMA controller's TPCC, TPTC0, and TPTC1 IP blocks.
Also included is a workaround for PRCM hardreset control of the DRA7xx
PCIe subsystem.
Note that I do not have a DRA7xx board, and therefore cannot
test any patches for that SoC family.
Basic build, boot, and PM test logs can be found here:
http://www.pwsan.com/omap/testlogs/omap-hwmod-b-for-v4.6/
20160301021258/
Peter Ujfalusi [Thu, 25 Feb 2016 14:50:18 +0000 (16:50 +0200)]
ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
Add hwmod data for the eDMA blocks:
- TPCC: Third-party channel controller
- TPTC0: Third-party transfer controller 0
- TPTC1: Third-party transfer controller 1
The TPCC's clock gating status follows the status of its clock and
power domain. This means that the hwmod code can not directly control
the TPCC enable/disable status.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[paul@pwsan.com: rephrased last two sentences of the patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Arnd Bergmann [Mon, 29 Feb 2016 23:24:43 +0000 (00:24 +0100)]
Merge tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux into next/soc
Merge "pxa changes for v4.6 cycle" from Robert Jarzmik:
This is a minor cycle with :
- cleanup fixes from Arnd, mainly build oriented and sparse type ones
- dma fixes for requestors above 32 (impacting mainly camera driver)
- some minor cleanup on pxa3xx device-tree side
* tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux:
dmaengine: pxa_dma: fix the maximum requestor line
ARM: pxa: add the number of DMA requestor lines
dmaengine: mmp-pdma: add number of requestors
dma: mmp_pdma: Add the #dma-requests DT property documentation
ARM: pxa: pxa3xx device-tree support cleanup
ARM: pxa: don't select RFKILL if CONFIG_NET is disabled
ARM: pxa: fix building without IWMMXT
ARM: pxa: move extern declarations to pm.h
ARM: pxa: always select one of the two CPU types
ARM: pxa: don't select GPIO_SYSFS for MIOA701
ARM: pxa: mark unused eseries code as __maybe_unused
ARM: pxa: mark spitz_card_pwr_ctrl as __maybe_unused
ARM: pxa: define clock registers as __iomem
Arnd Bergmann [Mon, 29 Feb 2016 23:12:17 +0000 (00:12 +0100)]
Merge tag 'sunxi-core-for-4.6' of https://git./linux/kernel/git/mripard/linux into next/soc
Merge "Allwinner core changes for 4.6" from Maxime Ripard:
Just introduce the A83T support.
* tag 'sunxi-core-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Introduce Allwinner for A83T support
Philipp Zabel [Thu, 25 Feb 2016 09:44:41 +0000 (10:44 +0100)]
ARM: imx: Make reset_control_ops const
The imx_src_ops structure is never modified. Make it const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Dirk Behme [Fri, 19 Feb 2016 06:50:12 +0000 (07:50 +0100)]
ARM: imx: Do L2 errata only if the L2 cache isn't enabled
All the generic L2 cache handling code is encapsulated by a
check if the L2 cache is enabled. If it's enabled already, the code
is skipped. The write to the L2-Cache controller from non-secure
world causes an imprecise external abort. This is needed in
scenarios where one of the cores runs an other OS, e.g. an RTOS.
For the i.MX6 specific L2 cache handling we missed this check.
Add it.
Signed-off-by: Marcel Grosshans <MarcelViktor.Grosshans@de.bosch.com>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Arnd Bergmann [Sun, 28 Feb 2016 03:18:27 +0000 (11:18 +0800)]
ARM: imx: select ARM_CPU_SUSPEND only for imx6
i.MX only needs to select ARM_CPU_SUSPEND manually for the
very specific case that CONFIG_PM_SLEEP is disabled and imx6
is used with CONFIG_PM enabled for runtime PM.
If we are building a kernel only for CPUs that are not using
the cpu_suspend() helper, we otherwise get a harmless
build warning:
warning: (ARCH_MXC && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM &&
EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE)
This moves the option to the SOC_IMX6 option that actually
requires it, in effect reverting commit
f36b594f3754 ("ARM:
mach-imx: Select ARM_CPU_SUSPEND at ARCH_MXC level") that was
meant as a cleanup and unintentionally caused this warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Arnd Bergmann [Fri, 26 Feb 2016 22:38:15 +0000 (23:38 +0100)]
Merge tag 'arm-soc/for-4.6/maintainers' of github.com/Broadcom/stblinux into next/soc
Merge "Broadcom maintainers changes for 4.6" from Florian Fainelli:
This pull request contains MAINTAINERS file updates for Broadcom ARM-based SoCs:
- Florian updates the Broadcom BCM63xx ARM-based DSL SoCs to use the same mailing-list
and development tree as all the other Broadcom SoCS
* tag 'arm-soc/for-4.6/maintainers' of http://github.com/Broadcom/stblinux:
MAINTAINERS: ARM: BCM63xx: Update git and mailing-lists
Arnd Bergmann [Fri, 26 Feb 2016 22:16:08 +0000 (23:16 +0100)]
Merge tag 'arm-soc/for-4.6/soc' of github.com/Broadcom/stblinux into next/soc
Merge "Broadcom soc changes for 4.6" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoC/platform changes:
- Masahiro updates the Broadcom Northstar Plus SMP operations to be annotated
with const and __initconst
- Florian removes an unused variable in the Broadcom BCM63XX SMP code
* tag 'arm-soc/for-4.6/soc' of http://github.com/Broadcom/stblinux:
ARM: BCM63xx: Remove unused pmb_dn variable
ARM: bcm: use const and __initconst for smp_operations
Robert Jarzmik [Mon, 15 Feb 2016 20:57:48 +0000 (21:57 +0100)]
dmaengine: pxa_dma: fix the maximum requestor line
The current number of requestor lines is limited to 31. This was an
error of a previous commit, as this number is platform dependent, and is
actually :
- for pxa25x: 40 requestor lines
- for pxa27x: 75 requestor lines
- for pxa3xx: 100 requestor lines
The previous testing did not reveal the faulty constant as on pxa[23]xx
platforms, only camera, MSL and USB are above requestor 32, and in these
only the camera has a driver using dma.
Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Antoine Tenart [Thu, 25 Feb 2016 10:14:57 +0000 (11:14 +0100)]
ARM: alpine: select the Alpine MSI controller driver
Select the Alpine MSI controller driver when using an Alpine platform.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Robert Jarzmik [Mon, 15 Feb 2016 20:57:47 +0000 (21:57 +0100)]
ARM: pxa: add the number of DMA requestor lines
Declare the number of DMA requestor lines per platform :
- for pxa25x: 40 requestor lines
- for pxa27x: 75 requestor lines
- for pxa3xx: 100 requestor lines
This information will be used to activate the DMA flow control or not.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Robert Jarzmik [Mon, 15 Feb 2016 20:57:46 +0000 (21:57 +0100)]
dmaengine: mmp-pdma: add number of requestors
The DMA chip has a fixed number of requestor lines used for flow
control. This number is platform dependent. The pxa_dma dma driver will
use this value to activate or not the flow control.
There won't be any impact on mmp_pdma driver.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Robert Jarzmik [Mon, 15 Feb 2016 20:27:44 +0000 (21:27 +0100)]
dma: mmp_pdma: Add the #dma-requests DT property documentation
For pxa based platforms, the number of requestor lines should be
specified, so that the driver can check if the flow control should be
activated (when a requestor line is asked for) or not.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Rob Herring <robh@kernel.org>
Arnd Bergmann [Fri, 26 Feb 2016 21:54:53 +0000 (22:54 +0100)]
Merge tag 'zynq-soc-for-4.6' of https://github.com/Xilinx/linux-xlnx into next/soc
Merge "ARM: Xilinx Zynq patches for v4.6" from Michal Simek:
- SLCR early init
- Fix L2 cache data corruption
- Fix early printk uart setting
* tag 'zynq-soc-for-4.6' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: Move early printk virtual address to vmalloc area
ARM: zynq: address L2 cache data corruption
ARM: zynq: initialize slcr mapping earlier
Arnd Bergmann [Fri, 26 Feb 2016 21:42:05 +0000 (22:42 +0100)]
Merge tag 'davinci-for-v4.6/edma' of git://git./linux/kernel/git/nsekhar/linux-davinci into next/soc
Merge "DaVinci EDMA enhancements for v4.6" from Sekhar Nori:
Pass dma_slave_map data to EDMA driver. This will help
migration to new DMA engine API for requesting
slave channels dma_request_chan().
* tag 'davinci-for-v4.6/edma' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: dm646x: Add dma_slave_map to edma
ARM: davinci: dm644x: Add dma_slave_map to edma
ARM: davinci: dm365: Add dma_slave_map to edma
ARM: davinci: dm355: Add dma_slave_map to edma
ARM: davinci: devices-da8xx: Add dma_slave_map to edma
Arnd Bergmann [Fri, 26 Feb 2016 21:39:45 +0000 (22:39 +0100)]
Merge tag 'renesas-soc-for-v4.6' of git://git./linux/kernel/git/horms/renesas into next/soc
Merge "Renesas ARM Based SoC Updates for v4.6" from Simon Horman:
* Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains
* Move emev2_smp_ops to emev2
* Remove legacy map_io callbacks on r8a7740 and emev2 SoCs
* Migrate to generic l2c OF initialization on r8a7740
* tag 'renesas-soc-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains
ARM: shmobile: emev2: Move declaration of emev2_smp_ops to emev2.h
ARM: shmobile: emev2: Remove legacy machine_desc.map_io() callback
ARM: shmobile: r8a7740: Remove legacy machine_desc.map_io() callback
ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
Arnd Bergmann [Fri, 26 Feb 2016 21:26:44 +0000 (22:26 +0100)]
Merge tag 'v4.5-next-soc' of https://github.com/mbgg/linux-mediatek into next/soc
Merge "ARM: mediatek: soc updates for v4.6" from Matthias Brugger:
Fix state machine implemenation of PMIC wrapper.
Add SMP support for mt7623.
Disable watchdog of STAUPD in PMIC wrapper for mt8173.
Add SMP support for mt2701.
Use builtin_platform_driver for scpsys. Driver can't be build as module.
Fix regulator enablement in scpsys.
* tag 'v4.5-next-soc' of https://github.com/mbgg/linux-mediatek:
soc: mediatek: SCPSYS: Fix double enabling of regulators
soc: mediatek: SCPSYS: use builtin_platform_driver
ARM: mediatek: add mt2701 smp bringup code
soc: mediatek: PMIC wrap: clear the STAUPD_TRIG bit of WDT_SRC_EN
ARM: mediatek: add MT7623 smp bringup code
soc: mediatek: PMIC wrap: Clear the vldclr if state machine stay on FSM_VLDCLR state.
Tony Lindgren [Fri, 26 Feb 2016 19:00:22 +0000 (11:00 -0800)]
ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
This allows RTC to work properly with the related DTS
changes.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Arnd Bergmann [Thu, 25 Feb 2016 22:04:50 +0000 (23:04 +0100)]
ARM: s3c24xx: Avoid warning for inb/outb
s3c24xx implements its own inb/outb macros, but the implementation
prints warnings when the port number argument is not a 32-bit scalar:
drivers/scsi/pas16.c: In function 'NCR5380_pwrite':
arch/arm/mach-s3c24xx/include/mach/io.h:193:68: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
This slightly modifies the definition of the __ioaddrc macro to avoid
the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Michal Simek [Mon, 15 Feb 2016 09:17:47 +0000 (10:17 +0100)]
ARM: zynq: Move early printk virtual address to vmalloc area
The patch
"ARM: 8432/1: move VMALLOC_END from 0xff000000 to 0xff800000"
(sha1:
6ff0966052c46efb53980b8a1add2e7b49c9f560)
has moved also start of VMALLOC area because size didn't change.
That's why origin location of vmalloc was
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
and now is
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
That's why uart virtual addresses need to be changed to reflect this new
memory setup. Starting address should be vmalloc start address.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Sekhar Nori [Thu, 18 Feb 2016 11:19:56 +0000 (16:49 +0530)]
ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
Add a custom reset handler for DRA7x PCIeSS. This
handler is required to deassert PCIe hardreset lines
after they have been asserted.
This enables the PCIe driver to access registers after
PCIeSS has been runtime enabled without having to
deassert hardreset lines itself.
With this patch applied, used lspci to make sure
connected PCIe device enumerates on DRA74x and DRA72x
EVMs.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reported-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Pankaj Dubey [Thu, 25 Feb 2016 04:10:00 +0000 (09:40 +0530)]
ARM: SAMSUNG: Remove unused register offset definition
This patch cleans up various map.h under mach-exynos, mach-s3c24xx and
plat-samsung by removing unused register offset. This patch also does a
minor nitpick of changing EXYNOS4 to EXYNOS from comment section of
header file "mach-exynos/include/mach/map.h".
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Pankaj Dubey [Thu, 25 Feb 2016 04:09:59 +0000 (09:39 +0530)]
ARM: EXYNOS: Cleanup header files inclusion
This includes trivial cleanup in exynos files such as
- remove unused header files inclusion from exynos.c, s5p-dev-mfc.c,
firmware.c, pm.c.
- move inclusion of of.h from common.h to pm.c where it is really
required
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Krzysztof Kozlowski [Tue, 2 Feb 2016 06:24:13 +0000 (15:24 +0900)]
drivers: soc: samsung: Enable COMPILE_TEST
Get some build coverage of Exynos PMU driver. It depends on
asm/cputype.h so its compilation is limited to ARM architectures.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Pankaj Dubey [Sat, 12 Dec 2015 07:44:01 +0000 (13:14 +0530)]
MAINTAINERS: Add maintainers entry for drivers/soc/samsung
This patch adds maintainers entry for new driver folder
drivers/soc/samsung
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Pankaj Dubey [Fri, 18 Dec 2015 03:32:16 +0000 (09:02 +0530)]
drivers: soc: Add support for Exynos PMU driver
This patch moves Exynos PMU driver implementation from "arm/mach-exynos"
to "drivers/soc/samsung". This driver is mainly used for setting misc
bits of register from PMU IP of Exynos SoC which will be required to
configure before Suspend/Resume. Currently all these settings are done
in "arch/arm/mach-exynos/pmu.c" but moving ahead for ARM64 based SoC
support, there is a need of this PMU driver in driver/* folder.
This driver uses existing DT binding information and there should
be no functionality change in the supported platforms.
Signed-off-by: Amit Daniel Kachhap <amitdanielk@gmail.com>
[tested on Peach-Pi (Exynos5880)]
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[for testing on Trats2 (Exynos4412) and Odroid XU3 (Exynos5422)]
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[k.kozlowski: Rebased, add necessary infrastructure for building and
selecting drivers/soc because original patchset was on top of movement
SROMc to drivers/soc]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Pankaj Dubey [Fri, 18 Dec 2015 03:32:15 +0000 (09:02 +0530)]
ARM: EXYNOS: Split up exynos5420 SoC specific PMU data
This patch splits up mach-exynos/pmu.c file, and moves exynos5420,
PMU configuration data and functions handing data into exynos5420
SoC specific PMU file mach-exynos/exynos5420-pmu.c.
[tested on Peach-Pi (Exynos5880)]
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Pankaj Dubey [Fri, 18 Dec 2015 03:32:14 +0000 (09:02 +0530)]
ARM: EXYNOS: Split up exynos5250 SoC specific PMU data
This patch splits up mach-exynos/pmu.c file, and moves exynos5250,
PMU configuration data and functions handing data into exynos5250
SoC specific PMU file mach-exynos/exynos5250-pmu.c.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Pankaj Dubey [Fri, 18 Dec 2015 03:32:13 +0000 (09:02 +0530)]
ARM: EXYNOS: Split up exynos4 SoC specific PMU data
This patch splits up mach-exynos/pmu.c file, and moves exynos4210,
exynos4412 and exynos4212 PMU configuration data and functions handing
data into a common exynos4 SoC specific PMU file mach-exynos/exynos4-pmu.c.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[for testing on Trats2 (Exynos4412, S2R, reboot, poweroff)]
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Pankaj Dubey [Fri, 18 Dec 2015 03:32:12 +0000 (09:02 +0530)]
ARM: EXYNOS: Split up exynos3250 SoC specific PMU data
This patch splits up mach-exynos/pmu.c file, and moves exynos3250 PMU
configuration data and functions handing those data into exynos3250
SoC specific PMU file mach-exynos/exynos3250-pmu.c.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Pankaj Dubey [Fri, 18 Dec 2015 03:32:11 +0000 (09:02 +0530)]
ARM: EXYNOS: Move pmu specific headers under "linux/soc/samsung"
Moving Exynos PMU specific header file into "include/linux/soc/samsung"
thus updated affected files under "mach-exynos" to use new location of
these header files.
Signed-off-by: Amit Daniel Kachhap <amitdanielk@gmail.com>
[tested on Peach-Pi (Exynos5880)]
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[for testing on Trats2 (Exynos4412) and Odroid XU3 (Exynos5422)]
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Pankaj Dubey [Mon, 22 Feb 2016 10:03:14 +0000 (15:33 +0530)]
ARM: EXYNOS: Correct header comment in Kconfig file
This patch corrects header comment of Kconfig file by changing EXYNOS4 to
EXYNOS.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Bartlomiej Zolnierkiewicz [Tue, 15 Dec 2015 17:33:21 +0000 (18:33 +0100)]
ARM: EXYNOS: Use generic cpufreq driver for Exynos5422/5800
The new CPU clock type allows the use of generic cpufreq-dt driver
for Exynos5422/5800.
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Bartlomiej Zolnierkiewicz [Tue, 15 Dec 2015 17:33:18 +0000 (18:33 +0100)]
ARM: EXYNOS: Use generic cpufreq driver for Exynos5420
The new CPU clock type allows the use of cpufreq-dt driver
for Exynos5420.
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Masahiro Yamada [Mon, 25 Jan 2016 11:41:29 +0000 (20:41 +0900)]
ARM: s3c64xx: use "depends on" instead of "if" after prompt
This platform recently moved to multi-platform, so missed the global
fixup by commit
e32465429490 ("ARM: use "depends on" for SoC configs
instead of "if" after prompt"). Fix it now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Geliang Tang [Sun, 27 Dec 2015 13:17:36 +0000 (21:17 +0800)]
ARM: plat-samsung: use to_platform_device()
Use to_platform_device() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Pankaj Dubey [Sat, 12 Dec 2015 07:43:56 +0000 (13:13 +0530)]
ARM: EXYNOS: Code cleanup in map.h
Remove unused exynos5440 uart offset macro.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Pankaj Dubey [Sat, 12 Dec 2015 07:43:55 +0000 (13:13 +0530)]
ARM: EXYNOS: Remove unused static mapping of CMU for exynos5
Remove unused static mapping of exynos5 CMU and related code.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Lars Persson [Thu, 11 Feb 2016 16:06:21 +0000 (17:06 +0100)]
ARM: mach-artpec: add entry to MAINTAINERS
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lars Persson [Thu, 11 Feb 2016 16:06:19 +0000 (17:06 +0100)]
arm: initial machine port for artpec-6 SoC
Basic machine port for the Artpec-6 SoC from Axis
Communications.
Signed-off-by: Lars Persson <larper@axis.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Feb 2016 21:47:45 +0000 (13:47 -0800)]
Merge tag 'stm32-soc-for-v4.6-1' of git://git./linux/kernel/git/mcoquelin/stm32 into next/soc
Highlights:
-----------
- Make STM32 to select PINCTRL
- Introduce MACH_STM32F429 flag
* tag 'stm32-soc-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
ARM: mach-stm32: Select pinctrl
ARM: Kconfig: Introduce MACH_STM32F429 flag
Signed-off-by: Olof Johansson <olof@lixom.net>
Peter Ujfalusi [Tue, 2 Feb 2016 14:27:07 +0000 (16:27 +0200)]
ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot
We still have some boards booting in legacy mode and they will need to have
the device/slave -> filter_fn mapping so we can convert the OMAP drivers
to use the new dmaengine API for requesting channels.
Only some OMAP24xx and OMAP3xxx boards can boot in legacy mode which means
we only need to provide the map for these SoCs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Peter Ujfalusi [Tue, 2 Feb 2016 14:27:06 +0000 (16:27 +0200)]
ARM: OMAP1: DMA: Provide dma_slave_map to omap-dma
OMAP1 can not boot in DT mode and to be able to clean up the driver
regarding to the dmaengine API use (switching to the new API) the
device/slave -> filter mapping needs to be provided to the omap-dma driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Peter Ujfalusi [Tue, 2 Feb 2016 12:43:17 +0000 (14:43 +0200)]
ARM: davinci: dm646x: Add dma_slave_map to edma
Provide the dma_slave_map to edma which will allow us to move the drivers
to the new, simpler dmaengine API and we can remove the DMA resources also
for the devices.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[nsekhar@ti.com: fix typos in code]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Peter Ujfalusi [Tue, 2 Feb 2016 12:43:16 +0000 (14:43 +0200)]
ARM: davinci: dm644x: Add dma_slave_map to edma
Provide the dma_slave_map to edma which will allow us to move the drivers
to the new, simpler dmaengine API and we can remove the DMA resources also
for the devices.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[nsekhar@ti.com: typo fixes in code]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Peter Ujfalusi [Tue, 2 Feb 2016 12:43:15 +0000 (14:43 +0200)]
ARM: davinci: dm365: Add dma_slave_map to edma
Provide the dma_slave_map to edma which will allow us to move the drivers
to the new, simpler dmaengine API and we can remove the DMA resources also
for the devices.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Peter Ujfalusi [Tue, 2 Feb 2016 12:43:14 +0000 (14:43 +0200)]
ARM: davinci: dm355: Add dma_slave_map to edma
Provide the dma_slave_map to edma which will allow us to move the drivers
to the new, simpler dmaengine API and we can remove the DMA resources also
for the devices.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[nsekhar@ti.com: typo fixes in code]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Peter Ujfalusi [Tue, 2 Feb 2016 12:43:13 +0000 (14:43 +0200)]
ARM: davinci: devices-da8xx: Add dma_slave_map to edma
Provide the dma_slave_map to edma which will allow us to move the drivers
to the new, simpler dmaengine API and we can remove the DMA resources also
for the devices.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[nsekhar@ti.com: fix map for edma1]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Robert Jarzmik [Sat, 6 Feb 2016 21:48:35 +0000 (22:48 +0100)]
ARM: pxa: pxa3xx device-tree support cleanup
Clocks, timer and several other drivers have well defined and working
device-tree bindings. Clean-up the code to leave only the strict
minimum. The final goal will be to remove the lookup array.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Keerthy [Wed, 17 Feb 2016 10:48:43 +0000 (16:18 +0530)]
ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls
Currently of_machine_is_compatible is used to detect the soc which
employs string comparison operations. We already have all the required
information in the omap_revision. Hence make use of the same like
the previous OMAPs and avoid costly string comparisons.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Geert Uytterhoeven [Tue, 16 Feb 2016 15:31:49 +0000 (16:31 +0100)]
ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains
All supported Renesas ARM SoCs (except for Emma Mobile EV2) have clock
domains. Some SoCs also have power domains. To ensure proper operation
of on-SoC modules, module clocks must be ungated, and power domains must
be powered up when needed.
Currently the user can choose to build a kernel with power management
enabled or disabled:
- If CONFIG_PM=y, power domains and/or module clocks are handled
dynamically by Runtime PM and the generic power domain.
- If CONFIG_PM=n, power domains are assumed to be powered up by reset
state or by the boot loader, and module clocks are handled by the
legacy clock domain on driver (un)bind.
The latter is implemented using a platform bus notifier, which
applies not only to all on-SoC devices, but to all platform devices
present in the system.
To remove the dependency on implicit assumptions, and to get rid of the
peculiarities of the legacy clock domain, enable CONFIG_PM and
CONFIG_PM_GENERIC_DOMAINS unconditionally, for all Renesas ARM SoCs with
clock and/or power domains.
This does cause an increase in kernel size. Given bloat-o-meter reports
a modest increase of 26 KiB for an RZ/A1H kernel, this should not be a
problem, even when used on RZ/A1H with XIP and internal RAM only.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 28 Jan 2016 15:20:49 +0000 (16:20 +0100)]
ARM: shmobile: emev2: Move declaration of emev2_smp_ops to emev2.h
make C=1:
arch/arm/mach-shmobile/smp-emev2.c:51:29: warning: symbol 'emev2_smp_ops' was not declared. Should it be static?
To fix this, move the forward declaration of emev2_smp_ops to a header
file, and include it where appropriate.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 28 Jan 2016 15:17:26 +0000 (16:17 +0100)]
ARM: shmobile: emev2: Remove legacy machine_desc.map_io() callback
Commit FIXME ("ARM: shmobile: Consolidate SCU mapping code") removed the
last user of the static mapping on emev2-based systems. Remove the
mapping and the legacy machine_desc.map_io() callback.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 28 Jan 2016 15:17:25 +0000 (16:17 +0100)]
ARM: shmobile: r8a7740: Remove legacy machine_desc.map_io() callback
Commit
37201ba5c99d0be8 ("ARM: shmobile: r8a7740: Migrate to generic l2c
OF initialization") removed the last user of the legacy "IOMEM()" macro
on r8a7740-based systems. Hence there's no longer a need to set up a
transparent mapping of system I/O registers. Remove the mapping and the
legacy machine_desc.map_io() callback.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Mon, 23 Nov 2015 13:56:02 +0000 (14:56 +0100)]
ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
Now all r8a7740-based platforms have been migrated to the generic l2c OF
initialization, it's no longer needed to map the L2 cache controller
registers from .map_io().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Mon, 23 Nov 2015 13:56:01 +0000 (14:56 +0100)]
ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
Migrate the generic r8a7740 platform from calling l2x0_of_init() to the
generic l2c OF initialization.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Keerthy [Fri, 19 Feb 2016 04:38:55 +0000 (10:08 +0530)]
ARM: AM43XX: hwmod: Add rtc hwmod
The patch registers the rtc hwmod on AM437x chips. The RTC module is
physically present on the AM438x SoC used on AM43X-EPOS-EVM, but it is
permanently disabled. A secure RTC is used instead on these devices,
where needed. Hence adding it selectively using a separate list to get
RTC Module functional on the other am43x SoCs used on am437x-gp-evm
and am437x-sk-evm.
Signed-off-by: Keerthy <j-keerthy@ti.com>
[paul@pwsan.com: cleaned up patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Lee Jones [Tue, 16 Feb 2016 14:17:00 +0000 (15:17 +0100)]
ARM: stm32: Identify a new SoC - STM32F469
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Fabio Estevam [Tue, 2 Feb 2016 21:45:38 +0000 (19:45 -0200)]
ARM: mx25: Add basic suspend/resume support
Tested basic suspend/resume on a mx25pdk:
$ echo enabled > /sys/class/tty/ttymxc0/power/wakeup
$ echo mem > /sys/power/state
Then press any key in the serial console and the system wakes up.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bai Ping [Tue, 2 Feb 2016 10:01:38 +0000 (18:01 +0800)]
ARM: imx: Add msl code support for imx6qp
The i.MX6QP is a different SOC, but internally we treate it as i.MX6Q
Rev_2.0 to maximum the code reusability. The chip silicon number we
read from the ANADIG_DIGPROG is 0x630100. This patch add code to
identify it as i.MX6QP Rev_1.0 when print out the silicon version.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Kishon Vijay Abraham I [Thu, 14 Jan 2016 14:11:10 +0000 (19:41 +0530)]
ARM: DRA7: hwmod: Add reset data for PCIe
Add PCIe reset data to PCIe hwmods on DRA7x.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Kishon Vijay Abraham I [Tue, 9 Feb 2016 09:05:43 +0000 (14:35 +0530)]
ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
OCP2SCP doesn't support smart idle wakeup according to
Table 26-22. OCP2SCP_SYSCONFIG in AM572x TRM [1] and
Table 26-22. OCP2SCP_SYSCONFIG in AM571x TRM [2].
Remove SIDLE_SMART_WKUP from the list of supported SIDLE modes
in hwmod data.
[1] -> http://www.ti.com/lit/ug/spruhz6e/spruhz6e.pdf
[2] -> http://www.ti.com/lit/ug/spruhz7a/spruhz7a.pdf
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Josh Cartwright [Wed, 3 Feb 2016 02:30:49 +0000 (20:30 -0600)]
ARM: zynq: address L2 cache data corruption
The Zynq has a bug where the L2 cache will return invalid data in some
circumstances unless the L2C_RAM register is set to 0x00020202 before the first
enabling of the L2 cache.
The Xilinx-recommended solution to this problem is to ensure that early one of
the earlier bootstages correctly initialize L2C_RAM, however, this issue wasn't
discovered and fixed until after their EDK/SDK 14.4 release. For systems built
prior to that, and which lack field-upgradable bootloaders, this issue still
exists and silent data corruption can be seen in the wild.
Fix these systems by ensuring L2C_RAM is properly initialized at the
earliest convenient moment prior to the L2 being brought up, which is
when the SLCR is first mapped.
The Zynq bug is described in more detail by Xilinx AR# 54190 as quoted
below.
Xilinx AR# 54190
http://www.xilinx.com/support/answers/54190.htm
Captured on 2014-09-24 14:43 -0500
= Description =
For proper L2 cache operation, the user code must program the
slcr.L2C_RAM register (address 0xF800_0A1C) to the value of
0x0002_0202 before enabling the L2 cache. The reset value
(0x0001_0101) might cause, very infrequently, the L2 cache to return
invalid data.
= Solution =
It is up to the user code (FSBL or other user code) to set the
slcr.L2C_RAM register to the value 0x0002_0202 before enabling the L2
cache.
Note: The L2 cache is disabled after reset and is not enabled by the
BootROM.
Note: The slcr.l2C_RAM register was previously reserved. It is added
in the Zynq-7000 AP SoC Technical Reference Manual (TRM) v1.5 as
"Reserved".
Thanks to Jaeden Amero for initial debugging and triage efforts.
Signed-off-by: Josh Cartwright <joshc@ni.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Josh Cartwright [Wed, 3 Feb 2016 02:30:48 +0000 (20:30 -0600)]
ARM: zynq: initialize slcr mapping earlier
In preparation for performing additional configuration prior to bringing
up L2, move the slcr initialization earlier in the boot process.
Signed-off-by: Josh Cartwright <joshc@ni.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Olof Johansson [Mon, 8 Feb 2016 21:54:16 +0000 (13:54 -0800)]
Merge tag 'mvebu-drivers-4.6-1' of git://git.infradead.org/linux-mvebu into next/soc
mvebu driver for 4.6 (part 1)
implement ARM delay timer for orion
* tag 'mvebu-drivers-4.6-1' of git://git.infradead.org/linux-mvebu:
ARM: orion: implement ARM delay timer
Signed-off-by: Olof Johansson <olof@lixom.net>
Mans Rullgard [Fri, 5 Feb 2016 09:49:22 +0000 (10:49 +0100)]
ARM: debug: add support for Palmchip BK-310x UART
Some SoCs use a Palmchip BK-310x UART which is mostly 16550 compatible
but with a different register layout. While this UART has previously
only been supported in MIPS based chips (Alchemy, Ralink), the ARM based
SMP87xx series from Sigma Designs also uses it.
This patch allows the debug console to work with this type of UART.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Sun, 7 Feb 2016 23:38:30 +0000 (15:38 -0800)]
Linux 4.5-rc3
Linus Torvalds [Sun, 7 Feb 2016 23:23:20 +0000 (15:23 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"The first real batch of fixes for this release cycle, so there are a
few more than usual.
Most of these are fixes and tweaks to board support (DT bugfixes,
etc). I've also picked up a couple of small cleanups that seemed
innocent enough that there was little reason to wait (const/
__initconst and Kconfig deps).
Quite a bit of the changes on OMAP were due to fixes to no longer
write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but
there were also other fixes.
Kirkwood had a bunch of gpio fixes for some boards. OMAP had RTC
fixes on OMAP5, and Nomadik had changes to MMC parameters in DT.
All in all, mostly the usual mix of various fixes"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
ARM: multi_v7_defconfig: enable DW_WATCHDOG
ARM: nomadik: fix up SD/MMC DT settings
ARM64: tegra: Add chosen node for tegra132 norrin
ARM: realview: use "depends on" instead of "if" after prompt
ARM: tango: use "depends on" instead of "if" after prompt
ARM: tango: use const and __initconst for smp_operations
ARM: realview: use const and __initconst for smp_operations
bus: uniphier-system-bus: revive tristate prompt
arm64: dts: Add missing DMA Abort interrupt to Juno
bus: vexpress-config: Add missing of_node_put
ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
ARM: dts: am4372: fix irq type for arm twd and global timer
ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
...
Linus Torvalds [Sun, 7 Feb 2016 23:17:47 +0000 (15:17 -0800)]
Merge branch 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox fixes from Jassi Brar:
- fix getting element from the pcc-channels array by simply indexing
into it
- prevent building mailbox-test driver for archs that don't have IOMEM
* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Fix dependencies for !HAS_IOMEM archs
mailbox: pcc: fix channel calculation in get_pcc_channel()
Linus Torvalds [Sun, 7 Feb 2016 06:14:46 +0000 (22:14 -0800)]
Merge tag 'usb-4.5-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes for 4.5-rc3.
The usual, xhci fixes for reported issues, combined with some small
gadget driver fixes, and a MAINTAINERS file update. All have been in
linux-next with no reported issues"
* tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: harden xhci_find_next_ext_cap against device removal
xhci: Fix list corruption in urb dequeue at host removal
usb: host: xhci-plat: fix NULL pointer in probe for device tree case
usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling
usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT
usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms
usb: xhci: set SSIC port unused only if xhci_suspend succeeds
usb: xhci: add a quirk bit for ssic port unused
usb: xhci: handle both SSIC ports in PME stuck quirk
usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.
Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"
MAINTAINERS: fix my email address
usb: dwc2: Fix probe problem on bcm2835
Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"
usb: musb: ux500: Fix NULL pointer dereference at system PM
usb: phy: mxs: declare variable with initialized value
usb: phy: msm: fix error handling in probe.
Linus Torvalds [Sun, 7 Feb 2016 06:13:16 +0000 (22:13 -0800)]
Merge tag 'staging-4.5-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some IIO and staging driver fixes for 4.5-rc3.
All of them, except one, are for IIO drivers, and one is for a speakup
driver fix caused by some earlier patches, to resolve a reported build
failure"
* tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Staging: speakup: Fix allyesconfig build on mn10300
iio: dht11: Use boottime
iio:
ade7753: avoid uninitialized data
iio: pressure: mpl115: fix temperature offset sign
iio: imu: Fix dependencies for !HAS_IOMEM archs
staging: iio: Fix dependencies for !HAS_IOMEM archs
iio: adc: Fix dependencies for !HAS_IOMEM archs
iio: inkern: fix a NULL dereference on error
iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.
iio: light: acpi-als: Report data as processed
iio: dac: mcp4725: set iio name property in sysfs
iio: add HAS_IOMEM dependency to VF610_ADC
iio: add IIO_TRIGGER dependency to STK8BA50
iio: proximity: lidar: correct return value
iio-light: Use a signed return type for ltr501_match_samp_freq()
Linus Torvalds [Sat, 6 Feb 2016 04:20:07 +0000 (20:20 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
radix-tree: fix oops after radix_tree_iter_retry
MAINTAINERS: trim the file triggers for ABI/API
dax: dirty inode only if required
thp: make deferred_split_scan() work again
mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
um: asm/page.h: remove the pte_high member from struct pte_t
mm, hugetlb: don't require CMA for runtime gigantic pages
mm/hugetlb: fix gigantic page initialization/allocation
mm: downgrade VM_BUG in isolate_lru_page() to warning
mempolicy: do not try to queue pages from !vma_migratable()
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
vmstat: make vmstat_update deferrable
mm, vmstat: make quiet_vmstat lighter
mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
memblock: don't mark memblock_phys_mem_size() as __init
dump_stack: avoid potential deadlocks
mm: validate_mm browse_rb SMP race condition
m32r: fix build failure due to SMP and MMU
...
Linus Torvalds [Sat, 6 Feb 2016 03:52:57 +0000 (19:52 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"We have a few wire protocol compatibility fixes, ports of a few recent
CRUSH mapping changes, and a couple error path fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: MOSDOpReply v7 encoding
libceph: advertise support for TUNABLES5
crush: decode and initialize chooseleaf_stable
crush: add chooseleaf_stable tunable
crush: ensure take bucket value is valid
crush: ensure bucket id is valid before indexing buckets array
ceph: fix snap context leak in error path
ceph: checking for IS_ERR instead of NULL
Linus Torvalds [Sat, 6 Feb 2016 03:38:15 +0000 (19:38 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Fixes all over the place:
- amdkfd: two static checker fixes
- mst: a bunch of static checker and spec/hw interaction fixes
- amdgpu: fix Iceland hw properly, and some fiji bugs, along with
some write-combining fixes.
- exynos: some regression fixes
- adv7511: fix some EDID reading issues"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (38 commits)
drm/dp/mst: deallocate payload on port destruction
drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
drm/dp/mst: move GUID storage from mgr, port to only mst branch
drm/dp/mst: change MST detection scheme
drm/dp/mst: Calculate MST PBN with 31.32 fixed point
drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
drm/mst: Add range check for max_payloads during init
drm/mst: Don't ignore the MST PBN self-test result
drm: fix missing reference counting decrease
drm/amdgpu: disable uvd and vce clockgating on Fiji
drm/amdgpu: remove exp hardware support from iceland
drm/amdgpu: load MEC ucode manually on iceland
drm/amdgpu: don't load MEC2 on topaz
drm/amdgpu: drop topaz support from gmc8 module
drm/amdgpu: pull topaz gmc bits into gmc_v7
drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
drm/amdgpu: iceland use CI based MC IP
drm/amdgpu: move gmc7 support out of CIK dependency
drm/amdgpu/gfx7: enable cp inst/reg error interrupts
drm/amdgpu/gfx8: enable cp inst/reg error interrupts
...
Linus Torvalds [Sat, 6 Feb 2016 02:11:23 +0000 (18:11 -0800)]
Merge tag 'pm+acpi-4.5-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are: a fix for a recently introduced false-positive warnings
about PM domain pointers being changed inappropriately (harmless but
annoying), an MCH size workaround quirk for one more platform, a
compiler warning fix (generic power domains framework), an ACPI LPSS
(Intel SoCs) driver fixup and a cleanup of the ACPI CPPC core code.
Specifics:
- PM core fix to avoid false-positive warnings generated when the
pm_domain field is cleared for a device that appears to be bound to
a driver (Rafael Wysocki).
- New MCH size workaround quirk for Intel Haswell-ULT (Josh Boyer).
- Fix for an "unused function" compiler warning in the generic power
domains framework (Ulf Hansson).
- Fixup for the ACPI driver for Intel SoCs (acpi-lpss) to set the PM
domain pointer of a device properly in one place that was
overlooked by a recent PM core update (Andy Shevchenko).
- Removal of a redundant function declaration in the ACPI CPPC core
code (Timur Tabi)"
* tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: Avoid false-positive warnings in dev_pm_domain_set()
PM / Domains: Silence compiler warning for an unused function
ACPI / CPPC: remove redundant mbox_send_message() declaration
ACPI / LPSS: set PM domain via helper setter
PNP: Add Haswell-ULT to Intel MCH size workaround
Jason Baron [Fri, 5 Feb 2016 23:37:04 +0000 (15:37 -0800)]
epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
In the current implementation of the EPOLLEXCLUSIVE flag (added for
4.5-rc1), if epoll waiters create different POLL* sets and register them
as exclusive against the same target fd, the current implementation will
stop waking any further waiters once it finds the first idle waiter.
This means that waiters could miss wakeups in certain cases.
For example, when we wake up a pipe for reading we do:
wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if
one epoll set or epfd is added to pipe p with POLLIN and a second set
epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the
wakeup since the current implementation will stop after it finds any
intersection of events with a waiter that is blocked in epoll_wait().
We could potentially address this by requiring all epoll waiters that
are added to p be required to pass the same set of POLL* events. IE the
first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL*
flags to be used by any other epfds that are added as EPOLLEXCLUSIVE.
However, I think it might be somewhat confusing interface as we would
have to reference count the number of users for that set, and so
userspace would have to keep track of that count, or we would need a
more involved interface. It also adds some shared state that we'd have
store somewhere. I don't think anybody will want to bloat
__wait_queue_head for this.
I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE
such that it can only be specified with EPOLLIN and/or EPOLLOUT. So
that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop
once we hit the first idle waiter that specifies the EPOLLIN bit, since
any remaining waiters that only have 'POLLOUT' set wouldn't need to be
woken. Likewise, we can do the same thing if 'POLLOUT' is in the wakeup
bit set and not 'POLLIN'. If both 'POLLOUT' and 'POLLIN' are set in the
wake bit set (there is at least one example of this I saw in fs/pipe.c),
then we just wake the entire exclusive list. Having both 'POLLOUT' and
'POLLIN' both set should not be on any performance critical path, so I
think that's ok (in fs/pipe.c its in pipe_release()). We also continue
to include EPOLLERR and EPOLLHUP by default in any exclusive set. Thus,
the user can specify EPOLLERR and/or EPOLLHUP but is not required to do
so.
Since epoll waiters may be interested in other events as well besides
EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by
doing a 'dup' call on the target fd and adding that as one normally
would with EPOLL_CTL_ADD. Since I think that the POLLIN and POLLOUT
events are what we are interest in balancing, I think that the 'dup'
thing could perhaps be added to only one of the waiter threads.
However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be
sufficient for the majority of use-cases.
Since EPOLLEXCLUSIVE is intended to be used with a target fd shared
among multiple epfds, where between 1 and n of the epfds may receive an
event, it does not satisfy the semantics of EPOLLONESHOT where only 1
epfd would get an event. Thus, it is not allowed to be specified in
conjunction with EPOLLEXCLUSIVE.
EPOLL_CTL_MOD is also not allowed if the fd was previously added as
EPOLLEXCLUSIVE. It seems with the limited number of flags to not be as
interesting, but this could be relaxed at some further point.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Tested-by: Madars Vitolins <m@silodev.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konstantin Khlebnikov [Fri, 5 Feb 2016 23:37:01 +0000 (15:37 -0800)]
radix-tree: fix oops after radix_tree_iter_retry
Helper radix_tree_iter_retry() resets next_index to the current index.
In following radix_tree_next_slot current chunk size becomes zero. This
isn't checked and it tries to dereference null pointer in slot.
Tagged iterator is fine because retry happens only at slot 0 where tag
bitmask in iter->tags is filled with single bit.
Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup")
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Kerrisk (man-pages) [Fri, 5 Feb 2016 23:36:58 +0000 (15:36 -0800)]
MAINTAINERS: trim the file triggers for ABI/API
Commit
ea8f8fc8631 ("MAINTAINERS: add linux-api for review of API/ABI
changes") added file triggers for various paths that likely indicated
API/ABI changes. However, catching all changes in Documentation/ABI/
and include/uapi/ produces a large volume of mail to linux-api, rather
than only API/ABI changes. Drop those two entries, but leave
include/linux/syscalls.h and kernel/sys_ni.c to catch syscall-related
changes.
[josh@joshtriplett.org: redid changelog]
Signed-off-by: Michael Kerrisk <mtk.man-pages@gmail.com>
Acked-by: Shuah khan <shuahkh@osg.samsung.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Monakhov [Fri, 5 Feb 2016 23:36:55 +0000 (15:36 -0800)]
dax: dirty inode only if required
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 5 Feb 2016 23:36:53 +0000 (15:36 -0800)]
thp: make deferred_split_scan() work again
We need to iterate over split_queue, not local empty list to get
anything split from the shrinker.
Fixes: e3ae19535c66 ("thp: limit number of object to scan on deferred_split_scan()")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konstantin Khlebnikov [Fri, 5 Feb 2016 23:36:50 +0000 (15:36 -0800)]
mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if
anon_vma appeared between lock and unlock. We have to check anon_vma
first or call anon_vma_prepare() to be sure that it's here. There are
only few users of these legacy helpers. Let's get rid of them.
This patch fixes anon_vma lock imbalance in validate_mm(). Write lock
isn't required here, read lock is enough.
And reorders expand_downwards/expand_upwards: security_mmap_addr() and
wrapping-around check don't have to be under anon vma lock.
Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.com
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xuejiufei [Fri, 5 Feb 2016 23:36:47 +0000 (15:36 -0800)]
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
When recovery master down, dlm_do_local_recovery_cleanup() only remove
the $RECOVERY lock owned by dead node, but do not clear the refmap bit.
Which will make umount thread falling in dead loop migrating $RECOVERY
to the dead node.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolai Stange [Fri, 5 Feb 2016 23:36:44 +0000 (15:36 -0800)]
um: asm/page.h: remove the pte_high member from struct pte_t
Commit
16da306849d0 ("um: kill pfn_t") introduced a compile warning for
defconfig (SUBARCH=i386):
arch/um/kernel/skas/mmu.c:38:206:
warning: right shift count >= width of type [-Wshift-count-overflow]
Aforementioned patch changes the definition of the phys_to_pfn() macro
from
((pfn_t) ((p) >> PAGE_SHIFT))
to
((p) >> PAGE_SHIFT)
This effectively changes the phys_to_pfn() expansion's type from
unsigned long long to unsigned long.
Through the callchain init_stub_pte() => mk_pte(), the expansion of
phys_to_pfn() is (indirectly) fed into the 'phys' argument of the
pte_set_val(pte, phys, prot) macro, eventually leading to
(pte).pte_high = (phys) >> 32;
This results in the warning from above.
Since UML only deals with 32 bit addresses, the upper 32 bits from
'phys' used to be always zero anyway. Also, all page protection flags
defined by UML don't use any bits beyond bit 9. Since the contents of a
PTE are defined within architecture scope only, the ->pte_high member
can be safely removed.
Remove the ->pte_high member from struct pte_t.
Rename ->pte_low to ->pte.
Adapt the pte helper macros in arch/um/include/asm/page.h.
Noteworthy is the pte_copy() macro where a smp_wmb() gets dropped. This
write barrier doesn't seem to be paired with any read barrier though and
thus, was useless anyway.
Fixes: 16da306849d0 ("um: kill pfn_t")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Fri, 5 Feb 2016 23:36:41 +0000 (15:36 -0800)]
mm, hugetlb: don't require CMA for runtime gigantic pages
Commit
944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the runtime gigantic page allocation via
alloc_contig_range(), making this support available only when CONFIG_CMA
is enabled. Because it doesn't depend on MIGRATE_CMA pageblocks and the
associated infrastructure, it is possible with few simple adjustments to
require only CONFIG_MEMORY_ISOLATION instead of full CONFIG_CMA.
After this patch, alloc_contig_range() and related functions are
available and used for gigantic pages with just CONFIG_MEMORY_ISOLATION
enabled. Note CONFIG_CMA selects CONFIG_MEMORY_ISOLATION. This allows
supporting runtime gigantic pages without the CMA-specific checks in
page allocator fastpaths.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Fri, 5 Feb 2016 23:36:38 +0000 (15:36 -0800)]
mm/hugetlb: fix gigantic page initialization/allocation
Attempting to preallocate 1G gigantic huge pages at boot time with
"hugepagesz=1G hugepages=1" on the kernel command line will prevent
booting with the following:
kernel BUG at mm/hugetlb.c:1218!
When mapcount accounting was reworked, the setting of
compound_mapcount_ptr in prep_compound_gigantic_page was overlooked. As
a result, the validation of mapcount in free_huge_page fails.
The "BUG_ON" checks in free_huge_page were also changed to
"VM_BUG_ON_PAGE" to assist with debugging.
Fixes: 53f9263baba69 ("mm: rework mapcount accounting to enable 4k mapping of THPs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 5 Feb 2016 23:36:36 +0000 (15:36 -0800)]
mm: downgrade VM_BUG in isolate_lru_page() to warning
Calling isolate_lru_page() is wrong and shouldn't happen, but it not
nessesary fatal: the page just will not be isolated if it's not on LRU.
Let's downgrade the VM_BUG_ON_PAGE() to WARN_RATELIMIT().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 5 Feb 2016 23:36:33 +0000 (15:36 -0800)]
mempolicy: do not try to queue pages from !vma_migratable()
Maybe I miss some point, but I don't see a reason why we try to queue
pages from non migratable VMAs.
This testcase steps on VM_BUG_ON_PAGE() in isolate_lru_page():
#include <fcntl.h>
#include <unistd.h>
#include <stdio.h>
#include <sys/mman.h>
#include <numaif.h>
#define SIZE 0x2000
int foo;
int main()
{
int fd;
char *p;
unsigned long mask = 2;
fd = open("/dev/sg0", O_RDWR);
p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
/* Faultin pages */
foo = p[0] + p[0x1000];
mbind(p, SIZE, MPOL_BIND, &mask, 4, MPOL_MF_MOVE | MPOL_MF_STRICT);
return 0;
}
The only case when we can queue pages from such VMA is MPOL_MF_STRICT
plus MPOL_MF_MOVE or MPOL_MF_MOVE_ALL for VMA which has pages on LRU,
but gfp mask is not sutable for migaration (see mapping_gfp_mask() check
in vma_migratable()). That's looks like a bug to me.
Let's filter out non-migratable vma at start of queue_pages_test_walk()
and go to queue_pages_pte_range() only if MPOL_MF_MOVE or
MPOL_MF_MOVE_ALL flag is set.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Fri, 5 Feb 2016 23:36:30 +0000 (15:36 -0800)]
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
Jan Stancek has reported that system occasionally hanging after "oom01"
testcase from LTP triggers OOM. Guessing from a result that there is a
kworker thread doing memory allocation and the values between "Node 0
Normal free:" and "Node 0 Normal:" differs when hanging, vmstat is not
up-to-date for some reason.
According to commit
373ccbe59270 ("mm, vmstat: allow WQ concurrency to
discover memory reclaim doesn't make any progress"), it meant to force
the kworker thread to take a short sleep, but it by error used
schedule_timeout(1). We missed that schedule_timeout() in state
TASK_RUNNING doesn't do anything.
Fix it by using schedule_timeout_uninterruptible(1) which forces the
kworker thread to take a short sleep in order to make sure that vmstat
is up-to-date.
Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Cristopher Lameter <clameter@sgi.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Arkadiusz Miskiewicz <arekm@maven.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 5 Feb 2016 23:36:27 +0000 (15:36 -0800)]
vmstat: make vmstat_update deferrable
Commit
0eb77e988032 ("vmstat: make vmstat_updater deferrable again and
shut down on idle") made vmstat_shepherd deferrable. vmstat_update
itself is still useing standard timer which might interrupt idle task.
This is possible because "mm, vmstat: make quiet_vmstat lighter" removed
cancel_delayed_work from the quiet_vmstat.
Change vmstat_work to use DEFERRABLE_WORK to prevent from pointless
wakeups from the idle context.
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 5 Feb 2016 23:36:24 +0000 (15:36 -0800)]
mm, vmstat: make quiet_vmstat lighter
Mike has reported a considerable overhead of refresh_cpu_vm_stats from
the idle entry during pipe test:
12.89% [kernel] [k] refresh_cpu_vm_stats.isra.12
4.75% [kernel] [k] __schedule
4.70% [kernel] [k] mutex_unlock
3.14% [kernel] [k] __switch_to
This is caused by commit
0eb77e988032 ("vmstat: make vmstat_updater
deferrable again and shut down on idle") which has placed quiet_vmstat
into cpu_idle_loop. The main reason here seems to be that the idle
entry has to get over all zones and perform atomic operations for each
vmstat entry even though there might be no per cpu diffs. This is a
pointless overhead for _each_ idle entry.
Make sure that quiet_vmstat is as light as possible.
First of all it doesn't make any sense to do any local sync if the
current cpu is already set in oncpu_stat_off because vmstat_update puts
itself there only if there is nothing to do.
Then we can check need_update which should be a cheap way to check for
potential per-cpu diffs and only then do refresh_cpu_vm_stats.
The original patch also did cancel_delayed_work which we are not doing
here. There are two reasons for that. Firstly cancel_delayed_work from
idle context will blow up on RT kernels (reported by Mike):
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.5.0-rt3 #7
Hardware name: MEDION MS-7848/MS-7848, BIOS M7848W08.20C 09/23/2013
Call Trace:
dump_stack+0x49/0x67
___might_sleep+0xf5/0x180
rt_spin_lock+0x20/0x50
try_to_grab_pending+0x69/0x240
cancel_delayed_work+0x26/0xe0
quiet_vmstat+0x75/0xa0
cpu_idle_loop+0x38/0x3e0
cpu_startup_entry+0x13/0x20
start_secondary+0x114/0x140
And secondly, even on !RT kernels it might add some non trivial overhead
which is not necessary. Even if the vmstat worker wakes up and preempts
idle then it will be most likely a single shot noop because the stats
were already synced and so it would end up on the oncpu_stat_off anyway.
We just need to teach both vmstat_shepherd and vmstat_update to stop
scheduling the worker if there is nothing to do.
[mgalbraith@suse.de: cancel pending work of the cpu_stat_off CPU]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Fri, 5 Feb 2016 23:36:21 +0000 (15:36 -0800)]
mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
The description mentions kswapd threads, while the deferred struct page
initialization is actually done by one-off "pgdatinitX" threads.
Fix the description so that potentially users are not confused about
pgdatinit threads using CPU after boot instead of kswapd.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Gibson [Fri, 5 Feb 2016 23:36:19 +0000 (15:36 -0800)]
memblock: don't mark memblock_phys_mem_size() as __init
At the moment memblock_phys_mem_size() is marked as __init, and so is
discarded after boot. This is different from most of the memblock
functions which are marked __init_memblock, and are only discarded after
boot if memory hotplug is not configured.
To allow for upcoming code which will need memblock_phys_mem_size() in
the hotplug path, change it from __init to __init_memblock.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Fri, 5 Feb 2016 23:36:16 +0000 (15:36 -0800)]
dump_stack: avoid potential deadlocks
Some servers experienced fatal deadlocks because of a combination of
bugs, leading to multiple cpus calling dump_stack().
The checksumming bug was fixed in commit
34ae6a1aa054 ("ipv6: update
skb->csum when CE mark is propagated").
The second problem is a faulty locking in dump_stack()
CPU1 runs in process context and calls dump_stack(), grabs dump_lock.
CPU2 receives a TCP packet under softirq, grabs socket spinlock, and
call dump_stack() from netdev_rx_csum_fault().
dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since
dump_lock is owned by CPU1
While dumping its stack, CPU1 is interrupted by a softirq, and happens
to process a packet for the TCP socket locked by CPU2.
CPU1 spins forever in spin_lock() : deadlock
Stack trace on CPU1 looked like :
NMI backtrace for cpu 1
RIP: _raw_spin_lock+0x25/0x30
...
Call Trace:
<IRQ>
tcp_v6_rcv+0x243/0x620
ip6_input_finish+0x11f/0x330
ip6_input+0x38/0x40
ip6_rcv_finish+0x3c/0x90
ipv6_rcv+0x2a9/0x500
process_backlog+0x461/0xaa0
net_rx_action+0x147/0x430
__do_softirq+0x167/0x2d0
call_softirq+0x1c/0x30
do_softirq+0x3f/0x80
irq_exit+0x6e/0xc0
smp_call_function_single_interrupt+0x35/0x40
call_function_single_interrupt+0x6a/0x70
<EOI>
printk+0x4d/0x4f
printk_address+0x31/0x33
print_trace_address+0x33/0x3c
print_context_stack+0x7f/0x119
dump_trace+0x26b/0x28e
show_trace_log_lvl+0x4f/0x5c
show_stack_log_lvl+0x104/0x113
show_stack+0x42/0x44
dump_stack+0x46/0x58
netdev_rx_csum_fault+0x38/0x3c
__skb_checksum_complete_head+0x6e/0x80
__skb_checksum_complete+0x11/0x20
tcp_rcv_established+0x2bd5/0x2fd0
tcp_v6_do_rcv+0x13c/0x620
sk_backlog_rcv+0x15/0x30
release_sock+0xd2/0x150
tcp_recvmsg+0x1c1/0xfc0
inet_recvmsg+0x7d/0x90
sock_recvmsg+0xaf/0xe0
___sys_recvmsg+0x111/0x3b0
SyS_recvmsg+0x5c/0xb0
system_call_fastpath+0x16/0x1b
Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This page took 0.052228 seconds and 5 git commands to generate.