Ingo Molnar [Sun, 7 Jun 2009 15:58:23 +0000 (17:58 +0200)]
perf report: Print more expressive message in case of file open error
Before:
$ perf report
failed to open file: No such file or directory
After:
$ perf report
failed to open file: perf.data (try 'perf record' first)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sun, 7 Jun 2009 15:46:24 +0000 (17:46 +0200)]
perf_counter tools: Handle kernels with !CONFIG_PERF_COUNTER
If perf is run on a !CONFIG_PERF_COUNTER kernel right now it
bails out with no messages or with confusing messages.
Standardize this case some more and explain the situation.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sun, 7 Jun 2009 15:39:02 +0000 (17:39 +0200)]
perf record: Fall back to cpu-clock-ticks if no PMU
On architectures/CPUs without PMU support but with perfcounters
enabled 'perf record' currently fails because it cannot create a
cycle based hw-perfcounter.
Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
are enabled).
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sun, 7 Jun 2009 15:31:52 +0000 (17:31 +0200)]
perf top: Fall back to cpu-clock-tick hrtimer sampling if no cycle counter available
On architectures/CPUs without PMU support but with perfcounters
enabled 'perf top' currently fails because it cannot create a
cycle based hw-perfcounter.
Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
is enabled).
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sun, 7 Jun 2009 15:06:46 +0000 (17:06 +0200)]
perf stat: Continue even on counter creation error
Before:
$ perf stat ~/hackbench 5
error: syscall returned with -1 (No such device)
After:
$ perf stat ~/hackbench 5
Time: 1.640
Performance counter stats for '/home/mingo/hackbench 5':
6524.570382 task-clock-ticks # 3.838 CPU utilization factor
35704 context-switches # 0.005 M/sec
191 CPU-migrations # 0.000 M/sec
8958 page-faults # 0.001 M/sec
<not counted> cycles
<not counted> instructions
<not counted> cache-references
<not counted> cache-misses
Wall-clock time elapsed: 1699.999995 msecs
Also add -v (--verbose) option to allow the printing of failed
counter opens.
Plus dont print 'inf' if wall-time is zero (due to jiffies granularity),
instead skip the printing of the CPU utilization factor.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Frederic Weisbecker [Sat, 6 Jun 2009 21:10:43 +0000 (23:10 +0200)]
perf top: Wait for a minimal set of events before reading first snapshot
The first snapshot reading often occur before any events have
been read in the mapped perfcounter files.
Just wait until we have at least one event before starting the
snapshot, or the delay before the first set of entries to be
displayed may be long in case of low refresh rate.
Note: we could also use a semaphore to wait before
"print_entries" number of eveents is reached, but again this
value is tunable and we can't ensure we will even reach it.
Also we could base on a default mimimum set of entries for the
first refresh, say 15, but again, the minimal sample is
tunable, and we could end up displaying nothing until we have a
minimal default set of events, which can take some time in case
of high samples filters.
Hence this simple solution which partially covers the default
case.
[ Impact: fix display artifacts in perf top ]
Signed-off-by: Frederic Weisbecker <fweisbeec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <
1244322643-6447-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 6 Jun 2009 19:25:29 +0000 (21:25 +0200)]
perf annotate: Fix command line help text
Arjan noticed this bug in the perf annotate help output:
-s, --symbol <file> symbol to annotate
that should be <symbol> instead.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arjan van de Ven [Sat, 6 Jun 2009 19:22:33 +0000 (21:22 +0200)]
perf_counter tools: Initialize a stack variable before use
the "perf report" utility crashed in some circumstances
because the "sym" stack variable was not initialized before used
(as also proven by valgrind).
With this fix both the crash goes away and valgrind no longer complains.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 6 Jun 2009 19:17:03 +0000 (21:17 +0200)]
perf annotate: Automatically pick up vmlinux in the local directory
Right now kernel debug info does not get resolved by default, because
we dont know where to look for the vmlinux.
The -k option can be used for that - but if no option is given, pick
up vmlinux files in the current directory - in case a kernel hacker
runs profiling from the source directory that the kernel was built in.
The real solution would be to embedd the location (and perhaps the
date/timestamp) of the vmlinux file in /proc/kallsyms, so that
tools can pick it up automatically.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 6 Jun 2009 19:04:17 +0000 (21:04 +0200)]
perf_counter tools: Fix error condition in parse_aliases()
gcc warned about this bug:
util/parse-events.c: In function ‘parse_generic_hw_symbols’:
util/parse-events.c:175: warning: comparison is always false due to limited range of data type
util/parse-events.c:182: warning: comparison is always false due to limited range of data type
util/parse-events.c:190: warning: comparison is always false due to limited range of data type
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arjan van de Ven [Sat, 6 Jun 2009 18:36:38 +0000 (20:36 +0200)]
perf_counter tools: Warning fixes on 32-bit
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 6 Jun 2009 18:33:43 +0000 (20:33 +0200)]
perf_counter tools: Move from Documentation/perf_counter/ to tools/perf/
Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 6 Jun 2009 18:21:25 +0000 (20:21 +0200)]
Merge branch 'linus' into perfcounters/core
Merge reason: Pick up the latest fixes before the -v8 perfcounters
release.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 6 Jun 2009 13:48:52 +0000 (15:48 +0200)]
perf_counter tools: Add 'perf annotate' feature
Add new perf sub-command to display annotated source code:
$ perf annotate decode_tree_entry
------------------------------------------------
Percent | Source code & Disassembly of /home/mingo/git/git
------------------------------------------------
:
: /home/mingo/git/git: file format elf64-x86-64
:
:
: Disassembly of section .text:
:
:
00000000004a0da0 <decode_tree_entry>:
: *modep = mode;
: return str;
: }
:
: static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size)
: {
3.82 : 4a0da0: 41 54 push %r12
: const char *path;
: unsigned int mode, len;
:
: if (size < 24 || buf[size - 21])
0.17 : 4a0da2: 48 83 fa 17 cmp $0x17,%rdx
: *modep = mode;
: return str;
: }
:
: static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size)
: {
0.00 : 4a0da6: 49 89 fc mov %rdi,%r12
0.00 : 4a0da9: 55 push %rbp
3.37 : 4a0daa: 53 push %rbx
: const char *path;
: unsigned int mode, len;
:
: if (size < 24 || buf[size - 21])
0.08 : 4a0dab: 76 73 jbe 4a0e20 <decode_tree_entry+0x80>
0.00 : 4a0dad: 80 7c 16 eb 00 cmpb $0x0,-0x15(%rsi,%rdx,1)
3.48 : 4a0db2: 75 6c jne 4a0e20 <decode_tree_entry+0x80>
: static const char *get_mode(const char *str, unsigned int *modep)
: {
: unsigned char c;
: unsigned int mode = 0;
:
: if (*str == ' ')
1.94 : 4a0db4: 0f b6 06 movzbl (%rsi),%eax
0.39 : 4a0db7: 3c 20 cmp $0x20,%al
0.00 : 4a0db9: 74 65 je 4a0e20 <decode_tree_entry+0x80>
: return NULL;
:
: while ((c = *str++) != ' ') {
0.06 : 4a0dbb: 89 c2 mov %eax,%edx
: if (c < '0' || c > '7')
1.99 : 4a0dbd: 31 ed xor %ebp,%ebp
: unsigned int mode = 0;
:
: if (*str == ' ')
: return NULL;
:
: while ((c = *str++) != ' ') {
1.74 : 4a0dbf: 48 8d 5e 01 lea 0x1(%rsi),%rbx
: if (c < '0' || c > '7')
0.00 : 4a0dc3: 8d 42 d0 lea -0x30(%rdx),%eax
0.17 : 4a0dc6: 3c 07 cmp $0x7,%al
0.00 : 4a0dc8: 76 0d jbe 4a0dd7 <decode_tree_entry+0x37>
0.00 : 4a0dca: eb 54 jmp 4a0e20 <decode_tree_entry+0x80>
0.00 : 4a0dcc: 0f 1f 40 00 nopl 0x0(%rax)
16.57 : 4a0dd0: 8d 42 d0 lea -0x30(%rdx),%eax
0.14 : 4a0dd3: 3c 07 cmp $0x7,%al
0.00 : 4a0dd5: 77 49 ja 4a0e20 <decode_tree_entry+0x80>
: return NULL;
: mode = (mode << 3) + (c - '0');
3.12 : 4a0dd7: 0f b6 c2 movzbl %dl,%eax
: unsigned int mode = 0;
:
: if (*str == ' ')
: return NULL;
:
: while ((c = *str++) != ' ') {
0.00 : 4a0dda: 0f b6 13 movzbl (%rbx),%edx
16.74 : 4a0ddd: 48 83 c3 01 add $0x1,%rbx
: if (c < '0' || c > '7')
: return NULL;
: mode = (mode << 3) + (c - '0');
The first column is the percentage of samples that arrived on that
particular line - relative to the total cost of the function.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 6 Jun 2009 13:19:13 +0000 (15:19 +0200)]
perf_counter tools: Prepare for 'perf annotate'
Prepare for the 'perf annotate' implementation by splitting off
builtin-annotate.c from builtin-report.c.
( We keep this commit separate to ease the later librarization
of the facilities that perf-report and perf-annotate shares. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 15 Apr 2008 20:39:31 +0000 (22:39 +0200)]
perf_counter tools: Tidy up manpage details
Also fix a misalignment in usage string printing.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 13 Mar 2009 02:20:49 +0000 (03:20 +0100)]
perf_counter tools: Uniform help printouts
Also add perf list to command-list.txt.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Sat, 6 Jun 2009 12:56:33 +0000 (14:56 +0200)]
perf_counter tools: Add help for perf list
Also update other areas of the help texts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 6 Jun 2009 11:58:12 +0000 (13:58 +0200)]
perf_counter tools: Fix cache-event printout
Also standardize the cache printout (so that it can be pasted back
into the command) and sort out the aliases.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Sat, 6 Jun 2009 10:24:17 +0000 (12:24 +0200)]
perf_counter tools: Add 'perf list' to list available events
perf list: List all the available event types which can be used in
-e (--event) options.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 5 Jun 2009 18:22:46 +0000 (20:22 +0200)]
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 6 Jun 2009 07:58:57 +0000 (09:58 +0200)]
perf_counter: Separate out attr->type from attr->config
Counter type is a frequently used value and we do a lot of
bit juggling by encoding and decoding it from attr->config.
Clean this up by creating a separate attr->type field.
Also clean up the various similarly complex user-space bits
all around counter attribute management.
The net improvement is significant, and it will be easier
to add a new major type (which is what triggered this cleanup).
(This changes the ABI, all tools are adapted.)
(PowerPC build-tested.)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Frederic Weisbecker [Fri, 5 Jun 2009 17:31:01 +0000 (19:31 +0200)]
perf top: Fix zero or negative refresh delay
If perf top is executed with a zero value for the refresh rate,
we get a division by zero exception while computing samples_per_sec.
Also a zero refresh rate is not possible, neither do we want to
accept negative values.
[ Impact: fix division by zero in perf top ]
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <
1244223061-5399-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 5 Jun 2009 16:37:22 +0000 (18:37 +0200)]
perf record: Set frequency correctly
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 5 Jun 2009 16:07:51 +0000 (18:07 +0200)]
perf_counter tools: Sample and display frequency adjustment changes
To allow the debugging of frequency-adjusting counters, sample
those adjustments and display them in perf report -D.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Fri, 5 Jun 2009 16:01:29 +0000 (18:01 +0200)]
perf_counter: Fix frequency adjustment for < HZ
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Fri, 5 Jun 2009 13:05:43 +0000 (15:05 +0200)]
perf_counter: Add PERF_SAMPLE_PERIOD
In order to allow easy tracking of the period, also provide means of
adding it to the sample data.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Fri, 5 Jun 2009 12:44:52 +0000 (14:44 +0200)]
perf_counter: Change PERF_SAMPLE_CONFIG into PERF_SAMPLE_ID
The purpose of PERF_SAMPLE_CONFIG was to identify the counters,
since then we've added counter ids, use those instead.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 5 Jun 2009 15:56:21 +0000 (17:56 +0200)]
perf_counter tools: Remove -march=native
Turns out that neither PowerPC nor older x86 compilers know this switch
...
and since it does not make a measurable difference, just omit it.
Reported-by: Paul Mackerras <paulus@samba.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 5 Jun 2009 12:29:10 +0000 (14:29 +0200)]
perf_counter tools: Clarify events/samples naming
A number of places said 'events' while they should say 'samples'.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 5 Jun 2009 12:13:18 +0000 (14:13 +0200)]
perf report: Display user/kernel differentiator
Before:
25.96% copy_user_generic_string
15.23% two_op
15.19% one_op
6.92% enough_duration
1.23% alloc_pages_current
1.14% acpi_os_read_port
1.08% _spin_lock
After:
25.96% [k] copy_user_generic_string
15.23% [.] two_op
15.19% [.] one_op
6.92% [.] enough_duration
1.23% [k] alloc_pages_current
1.14% [k] acpi_os_read_port
1.08% [k] _spin_lock
The '[k]' differentiator is a quick clue that it's a kernel symbol,
without having to bring in the full dso column.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Fri, 5 Jun 2009 12:04:59 +0000 (14:04 +0200)]
perf report: Deal with maps
In order to deal with [vdso] maps generalize the ip->symbol path
a bit and allow to override some bits with custom functions.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Fri, 5 Jun 2009 12:04:55 +0000 (14:04 +0200)]
perf_counter: Generate mmap events for install_special_mapping()
In order to track the vdso also generate mmap events for
install_special_mapping().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Fri, 5 Jun 2009 12:04:51 +0000 (14:04 +0200)]
x86: Set context.vdso before installing the mapping
In order to make arch_vma_name() work from inside
install_special_mapping() we need to set the context.vdso
before calling it.
( This is needed for performance counters to be able to track
this special executable area. )
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 5 Jun 2009 11:27:02 +0000 (13:27 +0200)]
perf record, top: Implement --freq
Support frequency-based profiling and make it the default.
(Also add a Hz printout in perf top.)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 5 Jun 2009 11:18:41 +0000 (13:18 +0200)]
perf record: Split out counter creation into a helper function
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yong Wang [Fri, 5 Jun 2009 03:37:35 +0000 (11:37 +0800)]
perf_counter tools: Fix incorrect printf formats
Otherwise the code does not compile on 32-bit boxes.
builtin-report.c: In function 'map__fprintf':
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 3 has type 'uint64_t'
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 4 has type 'uint64_t'
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 5 has type 'uint64_t'
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <
20090605033735.GA20451@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Mackerras [Fri, 5 Jun 2009 02:36:28 +0000 (12:36 +1000)]
perf_counter: Fix lockup with interrupting counters
Commit
8e3747c1 ("perf_counter: Change data head from u32 to u64")
changed the type of 'head' in struct perf_mmap_data from atomic_t
to atomic_long_t, but missed converting one use of atomic_read on
it to atomic_long_read. The effect of using atomic_read rather than
atomic_long_read on powerpc (and other big-endian architectures) is
that we get the high half of the 64-bit quantity, resulting in the
cmpxchg retry loop in perf_output_begin spinning forever as soon as
data->head becomes non-zero. On little-endian architectures such as
x86 we would get the low half, resulting in a lockup once data->head
becomes greater than 4G.
This fixes it by using atomic_long_read rather than atomic_read.
[ Impact: fix perfcounter lockup on PowerPC / big-endian systems ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18984.33964.21541.743096@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Thu, 4 Jun 2009 22:23:51 +0000 (15:23 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
drm/i915: Remove a bad BUG_ON in the fence management code.
Linus Torvalds [Thu, 4 Jun 2009 22:23:39 +0000 (15:23 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm: ignore EDID with really tiny modes.
drm: don't associate _DRM_DRIVER maps with a master
drm/i915: intel_lvds.c fix section mismatch
drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms.
drm: set permissions on edid file to 0444
drm: add newlines to text sysfs files
drm/radeon: fix ring free alignment calculations
drm: fix irq naming for kms drivers.
Salman Qazi [Thu, 4 Jun 2009 22:20:39 +0000 (15:20 -0700)]
drivers/char/mem.c: avoid OOM lockup during large reads from /dev/zero
While running 20 parallel instances of dd as follows:
#!/bin/bash
for i in `seq 1 20`; do
dd if=/dev/zero of=/export/hda3/dd_$i bs=
1073741824 count=1 &
done
wait
on a 16G machine, we noticed that rather than just killing the processes,
the entire kernel went down. Stracing dd reveals that it first does an
mmap2, which makes 1GB worth of zero page mappings. Then it performs a
read on those pages from /dev/zero, and finally it performs a write.
The machine died during the reads. Looking at the code, it was noticed
that /dev/zero's read operation had been changed by
557ed1fa2620dc119adb86b34c614e152a629a80 ("remove ZERO_PAGE") from giving
zero page mappings to actually zeroing the page.
The zeroing of the pages causes physical pages to be allocated to the
process. But, when the process exhausts all the memory that it can, the
kernel cannot kill it, as it is still in the kernel mode allocating more
memory. Consequently, the kernel eventually crashes.
To fix this, I propose that when a fatal signal is pending during
/dev/zero read operation, we simply return and let the user process die.
Signed-off-by: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Modified error return and comment trivially. - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Frederic Weisbecker [Thu, 4 Jun 2009 20:15:58 +0000 (22:15 +0200)]
perf_counter tools: Fix warn_unused_result warnings
Fix warnings for return values that we don't care about:
util/quote.c:222: attention : ignoring return value of ‘fwrite’, declared with attribute warn_unused_result
util/quote.c:235: attention : ignoring return value of ‘fwrite’, declared with attribute warn_unused_result
util/quote.c: In function ‘write_name_quotedpfx’:
util/quote.c:290: attention : ignoring return value of ‘fwrite’, declared with attribute warn_unused_result
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <
1244146558-8635-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arnaldo Carvalho de Melo [Thu, 4 Jun 2009 16:54:00 +0000 (13:54 -0300)]
perf report: Add -vvv to print the list of threads and its mmaps
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Frederic Weisbecker [Thu, 4 Jun 2009 18:48:04 +0000 (20:48 +0200)]
perf_counter: Sleep before refresh using poll in perf top
perf top is refreshed every delay_secs the thread runs in such
loop:
while (sleep(delay_secs)) {
print_sym_table();
}
At the end of print_sym_table(), poll is used without sleep delay
to check if we have something from stdin.
It means that this check is done only every delay_secs, which can
be higher that 2 secs if the user defined a custom refresh rate.
We can drop sleep() here and directly use poll to wait between
refresh periods, so that the reaction after the user stops perf top
after typing "Enter" is immediate and doesn't suffer from the
delay_secs latency.
Nb: poll doesn't add any overhead that can parasite perf top measures
since it sleeps the entire timeout here.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <
1244141284-7507-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rusty Russell [Wed, 3 Jun 2009 05:22:24 +0000 (14:52 +0930)]
lguest: fix 'unhandled trap 13' with CONFIG_CC_STACKPROTECTOR
We don't set up the canary; let's disable stack protector on boot.c so
we can get into lguest_init, then set it up. As a side effect,
switch_to_new_gdt() sets up %fs for us properly too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Thu, 4 Jun 2009 14:53:49 +0000 (16:53 +0200)]
perf_counter tools: Use fork and remove munmap events
Use fork events to clone comm and map data and remove everything
munmap related
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Thu, 4 Jun 2009 15:08:58 +0000 (17:08 +0200)]
perf_counter: Remove munmap stuff
In name of keeping it simple, only track mmap events. Userspace
will have to remove old overlapping maps when it encounters them.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Thu, 4 Jun 2009 14:53:44 +0000 (16:53 +0200)]
perf_counter: Add fork event
Create a fork event so that we can easily clone the comm and
dso maps without having to generate all those events.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 4 Jun 2009 14:33:00 +0000 (16:33 +0200)]
perf stat: Update help text
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 4 Jun 2009 14:24:37 +0000 (16:24 +0200)]
perf report: Bail out if there are unrecognized options/arguments
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 4 Jun 2009 13:40:25 +0000 (15:40 +0200)]
perf_counter tools: Dont output in color on !tty
Dont emit ASCII color characters if the terminal is not a tty,
such as when perf report gets redirected into a file.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 4 Jun 2009 13:19:47 +0000 (15:19 +0200)]
perf_counter tools: Add color terminal output support
Add Git's color printing library to util/color.[ch].
Add it to perf report, with a trivial example to print high-overhead
entries in red, low-overhead entries in green.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Thu, 4 Jun 2009 13:16:56 +0000 (15:16 +0200)]
perf report: Add consistent spacing rules
Make the sort header and the print function have the same column width.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 4 Jun 2009 12:21:16 +0000 (14:21 +0200)]
perf report: Print out the total number of events
So that the statistical quality of the profile can be estimated at a glance.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 4 Jun 2009 12:13:04 +0000 (14:13 +0200)]
perf_counter tools: Print out symbol parsing errors only if --verbose
Also, add a suggestion to 'perf report', if the default sort order is
used.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Thu, 4 Jun 2009 13:00:45 +0000 (15:00 +0200)]
perf report: Simplify symbol output
The DSO can be printed already - no need to repeat it in the
symbol field.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 4 Jun 2009 11:58:13 +0000 (13:58 +0200)]
perf_counter tools: Build with native optimization
Build the tools with -march=native by default.
No measurable difference in speed though, compared to the
default, on a Nehalem testbox.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Eric Anholt [Thu, 4 Jun 2009 11:18:14 +0000 (11:18 +0000)]
drm/i915: Remove a bad BUG_ON in the fence management code.
This could be triggered by a gtt mapping fault on 965 that decides to
remove the fence from another object that happens to be active currently.
Since the other object doesn't rely on the fence reg for its execution, we
don't wait for it to finish. We'll soon be not waiting on 915 most of the
time as well, so just drop the BUG_ON.
Signed-off-by: Eric Anholt <eric@anholt.net>
Ingo Molnar [Thu, 4 Jun 2009 11:41:22 +0000 (13:41 +0200)]
perf record/report: Fix PID/COMM handling
Fix two bugs causing lost comm mappings:
- initial PID is not 0 but getpid()
- when we are unable to handle an mmap event, dont assume the event
itself is broken - try to parse the stream. This way we wont lose
comm events.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yong Wang [Wed, 3 Jun 2009 08:42:25 +0000 (16:42 +0800)]
perf_counter: Documentation update
The 'nmi' bit is no longer there.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <
20090603084225.GA6553@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Mackerras [Wed, 3 Jun 2009 23:49:59 +0000 (09:49 +1000)]
perf_counter: powerpc: Use new identifier names in powerpc-specific code
Commit
b23f3325 ("perf_counter: Rename various fields") fixed up
most of the uses of the renamed fields, but missed one instance
of "record_type" in powerpc-specific code which needs to be changed
to "sample_type", and a "PERF_RECORD_ADDR" in the same statement that
needs to be changed to "PERF_SAMPLE_ADDR", causing compilation
errors on powerpc. This fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18983.3111.770392.800486@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 4 Jun 2009 06:53:05 +0000 (08:53 +0200)]
perf top: Reduce default filter threshold
On idle systems 'perf top' comes up empty by default, because the event
count filter is set to 100.
Reduce it to 5 instead.
Also add an option to limit the number of functions displayed.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arnaldo Carvalho de Melo [Thu, 4 Jun 2009 02:02:33 +0000 (23:02 -0300)]
perf report: Fix rbtree bug
Ingo Molnar reported:
> FYI, i just got this crash (segfault) in perf report after
> collecting a long profile from Xorg:
>
> Starting program: /home/mingo/tip/Documentation/perf_counter/perf report
> [Thread debugging using libthread_db enabled]
> Detaching after fork from child process 20008.
> [New Thread 0x7f92fd62a6f0 (LWP 20005)]
>
> Program received signal SIGSEGV, Segmentation fault.
> 0x000000000041031a in __rb_erase_color (node=0x142c090, parent=0x0,
> root=0x881918)
> at util/rbtree.c:143
> 143 if (parent->rb_left == node)
It was a problem introduced in this cset:
perf report: Fix comm sorting -
8229289b607682f90b946ad2c319526303c17700
This patch should fix it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adam Jackson [Thu, 4 Jun 2009 00:20:34 +0000 (10:20 +1000)]
drm: ignore EDID with really tiny modes.
Some EDIDs lie and report tiny modes that aren't possible. Ignore
these modes.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ben Skeggs [Tue, 26 May 2009 00:35:52 +0000 (10:35 +1000)]
drm: don't associate _DRM_DRIVER maps with a master
A driver will use the _DRM_DRIVER map flag to indicate that it wants
to be responsible for removing the map itself, bypassing the DRM's
automagic cleanup code.
Since the multi-master changes this has been broken, resulting in some
drivers having their registers unmapped before it's finished with them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jaswinder Singh Rajput [Wed, 3 Jun 2009 23:41:19 +0000 (09:41 +1000)]
drm/i915: intel_lvds.c fix section mismatch
intel_no_lvds[] does not require __initdata as it is used only by
void intel_lvds_init(struct drm_device *dev).
Signed-off-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Keith Packard [Sun, 31 May 2009 03:42:28 +0000 (20:42 -0700)]
drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms.
Making the drm_crtc.c code recognize the DPMS property and invoke the
connector->dpms function doesn't remove any capability from the driver while
reducing code duplication.
That just highlighted the problem with the existing DPMS functions which
could turn off the connector, but failed to turn off any relevant crtcs. The
new drm_helper_connector_dpms function manages all of that, using the
drm_helper-specific crtc and encoder dpms functions, automatically computing
the appropriate DPMS level for each object in the system.
This fixes the current troubles in the i915 driver which left PLLs, pipes
and planes running while in DPMS_OFF mode or even while they were unused.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Keith Packard [Sun, 31 May 2009 03:42:26 +0000 (20:42 -0700)]
drm: set permissions on edid file to 0444
Without initializing the sysfs attributes for the edid file,
it was created with mode 0, making it difficult for applications to use.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Keith Packard [Sun, 31 May 2009 03:42:25 +0000 (20:42 -0700)]
drm: add newlines to text sysfs files
The contents of various simple text files in sysfs should end with
a newline to make them easier to read from the console.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 3 Jun 2009 21:08:13 +0000 (07:08 +1000)]
drm/radeon: fix ring free alignment calculations
fd.o bz#21849
We were aligning to +16 dwords, instead of to the next 16dword
boundary in the ring. Fix the calculation to go to the next 16dword
boundary when space checking.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 2 Jun 2009 06:50:35 +0000 (16:50 +1000)]
drm: fix irq naming for kms drivers.
allocating devname in the i915 driver was a hack originally and I
forgot to figure out how to do this properly back then.
So this is the cleaner version that just picks devname or driver name
in the irq code.
It removes the devname allocs from the i915 driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ingo Molnar [Wed, 3 Jun 2009 21:29:14 +0000 (23:29 +0200)]
perf report: Handle all known event types
We have munmap, throttle/unthrottle and period events as well,
process them - otherwise they are considered broke events and
we mis-parse the next few events.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 21:14:49 +0000 (23:14 +0200)]
perf report: Split out event processing helpers
- Introduce per event helper functions
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 21:14:49 +0000 (23:14 +0200)]
perf report: Clean up event processing
- Split out event processig into process_events() helper.
- Untangle the cwd parameters - it's constant so can be a static.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 20:19:36 +0000 (22:19 +0200)]
perf_counter: Fix throttling lock-up
Throttling logic is broken and we can lock up with too small
hw sampling intervals.
Make the throttling code more robust: disable counters even
if we already disabled them.
( Also clean up whitespace damage i noticed while reading
various pieces of code related to throttling. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 19:48:40 +0000 (21:48 +0200)]
perf_counter tools: Work around warnings in older GCCs
GCC 4.1.2 produces:
util/parse-options.c: In function ‘get_value’:
util/parse-options.c:36: warning: ‘arg’ may be used uninitialized in this function
builtin-top.c: In function ‘display_thread’:
builtin-top.c:178: warning: ‘printed’ may be used uninitialized in this function
Annotate them away by initializing these variables to 0.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arnaldo Carvalho de Melo [Wed, 3 Jun 2009 17:49:21 +0000 (14:49 -0300)]
perf_counter tools: Fix off-by-one bug in symbol__new
The end is really (start + len - 1). Noticed when synthesizing
the PLT symbols, that are small (16 bytes), and hot on the
start RIP.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <
20090603174921.GG7805@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 18:13:51 +0000 (20:13 +0200)]
perf_counter tools: Optimize harder
Use -O6 to build the tools.
Before:
12387507370 instructions # 3121.653 M/sec
After:
6244894971 instructions # 3458.437 M/sec
Almost twice as fast!
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 18:09:11 +0000 (20:09 +0200)]
perf help: Fix bug when there's no perf-* command around
main_cmds can be empty - fix util/help.c to handle this case
without segfaulting.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 17:59:24 +0000 (19:59 +0200)]
perf report: Add front-entry cache for lookups
Before:
Performance counter stats for './perf report -i perf.data.big':
12453988058 instructions
Performance counter stats for './perf report -i perf.data.big':
12379566017 instructions
0.60% reduction.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 17:36:07 +0000 (19:36 +0200)]
perf stat: Print out all arguments
Before:
Performance counter stats for '/home/mingo/hackbench':
After:
Performance counter stats for '/home/mingo/hackbench 10':
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 17:30:38 +0000 (19:30 +0200)]
perf report: Display 100% correctly
Needs to be 6.2 not 5.2, for 100.00% to be aligned properly.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 17:27:19 +0000 (19:27 +0200)]
perf record: Refine capture printout
Print out the number of bytes captured, and the (estimated) number of
events the output file contains.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 17:17:25 +0000 (19:17 +0200)]
perf_counter tools: Clean up old kerneltop references
kerneltop has been replaced with perf top - so fix up a few
remaining references to it in display text and error messages.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Wed, 3 Jun 2009 12:01:36 +0000 (14:01 +0200)]
perf_counter: Fix race in counter initialization
We need the PID namespace and counter ID available when the
counter overflows and we need to generate a sample event.
[ Impact: fix kernel crash with high-frequency sampling ]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
[ fixed a further crash and cleaned up the initialization a bit ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Wed, 3 Jun 2009 10:37:36 +0000 (12:37 +0200)]
perf report: Fix comm sorting
Since we can (and do) change comm strings during the collection
phase, we cannot actually sort on them to build the histogram.
Therefore add an (optional) third sorting phase to collapse the
histrogram.
Comm sorting now builds the histrogram on threads and then in
the collapse phase collects all threads with the same comm.
This collapsed histogram is then reversed and sorted on events.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Wed, 3 Jun 2009 09:24:33 +0000 (11:24 +0200)]
perf record: Use long arg for counter period
I wrote this to test the extended period emulation, we might as
well merge it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Wed, 3 Jun 2009 09:23:56 +0000 (11:23 +0200)]
perf_counter: Add a comm hook for pure fork()s
I noticed missing COMM events and found that we missed
reporting them for pure forks.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Mackerras [Wed, 3 Jun 2009 09:40:36 +0000 (19:40 +1000)]
perf_counter: powerpc: Fix race causing "oops trying to read PMC0" errors
When using interrupting counters and limited (non-interrupting)
counters at the same time, it's possible that we get an
interrupt in write_mmcr0() after writing MMCR0 but before we
have set up the counters using limited PMCs. What happens then
is that we get into perf_counter_interrupt() with
counter->hw.idx = 0 for the limited counters, leading to the
"oops trying to read PMC0" error message being printed.
This fixes the problem by making perf_counter_interrupt()
robust against counter->hw.idx being zero (the counter is just
ignored in that case) and also by changing write_mmcr0() to
write MMCR0 initially with the counter overflow interrupt
enable bits masked (set to 0). If the MMCR0 value requested by
the caller has either of those bits set, we write MMCR0 again
with the requested value of those bits after setting up the
limited counters properly.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <18982.17684.138182.954599@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Mackerras [Wed, 3 Jun 2009 09:38:58 +0000 (19:38 +1000)]
perf_counter: powerpc: Fix event alternative code generation on POWER5/5+
Commit
ef923214 ("perf_counter: powerpc: use u64 for event
codes internally") introduced a bug where the return value from
function find_alternative_bdecode gets put into a u64 variable
and later tested to see if it is < 0. The effect is that we
get extra, bogus event code alternatives on POWER5 and POWER5+,
leading to error messages such as "oops compute_mmcr failed"
being printed and counters not counting properly.
This fixes it by using s64 for the return type of
find_alternative_bdecode and for the local variable that the
caller puts the value in. It also makes the event argument a
u64 on POWER5+ for consistency.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <18982.17586.666132.90983@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 08:39:26 +0000 (10:39 +0200)]
perf report: Handle vDSO symbols properly
We were not looking up vDSO symbols properly, because they
are in the kallsyms but are user-mode entries.
Pass negative addresses to the kernel dso object, this
way we resolve them properly:
0.05% [kernel]: vread_tsc
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 08:07:39 +0000 (10:07 +0200)]
perf report: Improve sort key recognition
- allow case-insensitive tokens - such as --sort Comm,Symbol
- allow substring shortcuts: --sort sym
- detect invalid tokens and bail out
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 3 Jun 2009 07:38:58 +0000 (09:38 +0200)]
perf report: Print -D to stdout
-D prints to stderr - which is a bit confusing - print to stdout
instead.
Also clean up the if (dump_trace) patterns via a dprintf helper.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arnaldo Carvalho de Melo [Wed, 3 Jun 2009 03:54:33 +0000 (00:54 -0300)]
perf_counter tools: Cover PLT symbols too
PLT, the Program Linking Table, is used with the dynamic linker to
allow PIC code in executables and shared objects to figure out
where functions are in other shared objects.
It is one of the sources of unknown/unresolved symbols - this patch
does what binutils figures out when you ask it to disassembly.
(objdump -S)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yong Wang [Wed, 3 Jun 2009 05:12:55 +0000 (13:12 +0800)]
perf_counter/x86: Remove the IRQ (non-NMI) handling bits
Remove the IRQ (non-NMI) handling bits as NMI will be used always.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <
20090603051255.GA2791@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Wed, 3 Jun 2009 03:07:25 +0000 (20:07 -0700)]
Linux 2.6.30-rc8
Linus Torvalds [Wed, 3 Jun 2009 01:06:10 +0000 (18:06 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/pmac: Update PowerMac 32-bit defconfig
Ingo Molnar [Tue, 2 Jun 2009 21:43:11 +0000 (23:43 +0200)]
perf record: Print out the number of events captured
It makes sense to inform the user about how many events
perf record has written - so that the sufficiency of
profiling coverage and intensity can be determined at
a glance.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 2 Jun 2009 21:37:05 +0000 (23:37 +0200)]
perf_counter tools: Make source code headers more coherent
The perf commands had different ways of describing themselves,
introduce a coherent command-file-header format taken from the
Git project.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 2 Jun 2009 21:24:45 +0000 (23:24 +0200)]
perf report: Print more info instead of <unknown> entries
Sometimes we still fail to find a DSO or look up a symbol,
print out the raw information in this case (which an help
debug the problem), instead of a not very helpful <unknown>
string.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This page took 0.050171 seconds and 5 git commands to generate.