Olof Johansson [Wed, 21 May 2014 21:36:06 +0000 (14:36 -0700)]
Merge tag 'sunxi-dt-for-3.16' of https://github.com/mripard/linux into next/dt
Merge "Allwinner DT additions for 3.16" from Maxime Ripard:
- Introduction of the MMC controlers
- New board: A10s R7, Mele M9, APP4-EVB1
- Enabled the PMU on the Cortex A7-based SoCs
* tag 'sunxi-dt-for-3.16' of https://github.com/mripard/linux: (38 commits)
ARM: sunxi: dt: declare the r_pio pin controller for A31 SoC
ARM: sunxi: dt: add PRCM clk and reset controller subdevices
ARM: sunxi: dt: add APP4-EVB1 board support
ARM: sun6i: dt: Add support for the USB controllers
ARM: sun6i: Add the USB clocks to the DTSI
ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board
ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodes
ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
ARM: dts: sunxi: Add reg_vcc3v3 supply to sunxi-common-regulators.dtsi
ARM: dts: sun7i: Add basic support for the Cubietruck WiFi module
ARM: dts: sun7i: Enable mmc controller on various A20 boards
ARM: dts: sun7i: Add pin-muxing info for the mmc controllers
ARM: dts: sun7i: Add mmc controller nodes
ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9
ARM: dts: sun6i: Add mmc controller nodes
ARM: dts: sun6i: Add mmc clocks
ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boards
ARM: dts: sun5i: Add mmc controller nodes
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 20 May 2014 06:00:25 +0000 (23:00 -0700)]
Merge tag 'renesas-dt3-for-v3.16' of git://git./linux/kernel/git/horms/renesas into next/dt
Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.16" from Simon
Horman:
r8a7791 (R-Car M2), r8a7779 (R-Car H1), r8a7778 (R-Car M1),
r8a7740 (R-Mobile A1) and r8a73a4 (R-Mobile APE6) SoCs
* Move interrupt-parent property to root node
r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCs
* Add GPIO clocks
r8a7791 (R-Car M2) based Henninger board
* Add MSIOF0, QSPI and SDHI0/2 support
* Specify EXTAL frequency
r8a7779 (R-Car H1) based Marzen board
* Set SMSC lan to use irq-push-pull
r8a7740 (R-Mobile A1) SoC
* Remove duplicate interrupt-parent property
r8a7740 (R-Mobile A1) based Armadillo800 EVA board
* Add Ethernet support
* tag 'renesas-dt3-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7740 dtsi: Remove duplicate interrupt-parent property
ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pull
ARM: shmobile: r8a7791 dtsi: Add GPIO clocks
ARM: shmobile: r8a7790 dtsi: Add GPIO clocks
ARM: shmobile: dts: Move interrupt-parent property to root node
ARM: shmobile: armadillo-reference dts: Add Ethernet support
ARM: shmobile: r8a7740 dtsi: Add Ethernet support
ARM: shmobile: henninger: add MSIOF0 DT support
ARM: shmobile: henninger: add QSPI DT support
ARM: shmobile: henninger: add SDHI0/2 DT support
ARM: shmobile: henninger: specify EXTAL frequency
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 20 May 2014 05:46:00 +0000 (22:46 -0700)]
Merge tag 'at91-dt2' of git://github.com/at91linux/linux-at91 into next/dt
Merge "at91: DT for 3.16 #2" from Nicolas Ferre:
3.16: second DT series:
- at91sam9rl and at91sam9261 fixes about PLL ranges
- at91sam9261 more comprehensive support for SSC
- sama5d3 Xplained: addition of pull-ups, PWM and PMIC (regulator)
* tag 'at91-dt2' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: at91-sama5d3_xplained: add the regulator device node
ARM: at91: add 2 PWM outputs to SAMA5D3 Xplained
ARM: at91: add PWM pinctrl to SAMA5D3
ARM: at91: add pull-up to i2c[02] on SAMA5D3 Xplained
ARM: at91/dt: sam9rl: Fix PLL output range and mck divisors
ARM: at91/dt: sam9261: Add ssc2, SSC clocks and pcks
ARM: at91/dt: sam9261: Fix PLL output ranges and other clocks divisors
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 20 May 2014 05:23:48 +0000 (22:23 -0700)]
Merge tag 'keystone-dts' of git://git./linux/kernel/git/ssantosh/linux-keystone into next/dt
Merge "ARM: Keystone DTS updates for 3.16" from Santosh Shilimkar:
Keystone DTS updates for 3.16
- Few of address cell warning fixes.
- Add Lamarr and Edision EVM NOR flash and NAND devices.
- Update dts to make use of dma-ranges and dma-coherent properties.
* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-evm: add spi nor flash support
ARM: dts: k2l-evm: add AEMIF/NAND device entry
ARM: dts: k2e-evm: add AEMIF/NAND device entry
ARM: dts: keystone: Update USB node for dma properties
ARM: dts: keystone: Use dma-ranges property
ARM: dts: keystone: add cell's information to spi nodes
ARM: dts: keystone: move i2c0 device node from SoC to board files
ARM: dts: keystone: add cell's information to i2c nodes
ARM: dts: keystone: drop address and size cells from GIC node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 20 May 2014 05:02:16 +0000 (22:02 -0700)]
Merge tag 'v3.16-rockchip-dt' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Merge "ARM: rockchip: devicetree changes for v3.16" from Heiko Stübner:
Addition of missing board compatible names and their vendor-prefixes
as well as the dts portions of the pinctrl rework.
* tag 'v3.16-rockchip-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: convert pinctrl nodes to new bindings
ARM: dts: rockchip: add root compatible properties
of: add mundoreader and radxa vendor prefixes
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 20 May 2014 04:55:03 +0000 (21:55 -0700)]
Merge tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu into next/dt
Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper:
mvebu DT changes for v3.16
- kirkwood
- rework nsa3x0 board to add nsa320
- large cleanup to facilitate use in barebox
- guruplug phy updates
- audio updates for t5325
- mvebu
- use clocks vice clock-frequency for uart nodes
- armada 375/380/385
- add watchdog node
- add coherency fabric
- add smp support
- add sdhci
- add ahci
- add thermal sensor
- armada 370/XP
- and pmsu
* tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits)
ARM: Kirkwood: t5325: Use simple card to instantiate audio
ARM: Kirkwood: DT: Add missing #sound-dai-cells property
ARM: Kirkwood: Add node for audio codec
ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id
ARM: dts: kirkwood: set Guruplug ethernet PHY compatible
ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
ARM: dts: kirkwood: set default pinctrl for I2C0
ARM: dts: kirkwood: set default pinctrl for NAND
ARM: dts: kirkwood: set default pinctrl for SPI0
ARM: dts: kirkwood: set default pinctrl for UART0/1
ARM: dts: kirkwood: set default pinctrl for GBE1
ARM: dts: kirkwood: consolidate common pinctrl settings
ARM: dts: kirkwood: add pinctrl node to common SoC include
ARM: dts: kirkwood: rename pin-controller nodes
ARM: dts: kirkwood: remove clock-frequency properties from UART nodes
ARM: dts: kirkwood: add stdout-path property to all boards
ARM: dts: kirkwood: add node labels
ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC
ARM: mvebu: Enable the thermal sensor in Armada 375 SoC
ARM: mvebu: don't use clocks property in UART node for Netgear RN2120
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 16 May 2014 23:07:37 +0000 (16:07 -0700)]
Merge tag 'socfpga-dt-updates-for-3.16_v3' of git://git.rocketboards.org/linux-socfpga-next into next/dt
Merge "dts: socfpga: general updates for the socfpga platform" from Dinh
Nguyen:
Mostly DTS additions to the SOCFPGA platform from Steffan Trumtrar, and a
couple of device tree documentation updates/typo fix.
This one does not the GPIO binding patch, as that is pending further
discussion. Also, v3 fixes a rebase artifact and compile tested.
* tag 'socfpga-dt-updates-for-3.16_v3' of git://git.rocketboards.org/linux-socfpga-next:
ARM: socfpga: dts: Add div-reg to the main_pll clocks
ARM: socfpga: dts: add reset-controller
Documentation: dt: reset: move socfpga-reset
Documentation: dt: socfpga: add reset-cells property
ARM: socfpga: dts: Add DTS entries for USB
ARM: socfpga: dts: Remove hard coded clock-frequency property
ARM: socfpga: dts: add eeprom and rtc on i2c0
ARM: socfpga: dts: convert to preprocessor includes
ARM: socfpga: dts: add rtc on i2c0 to socrates
ARM: socfpga: dts: add support for EBV SOCrates
ARM: socfpga: dts: add can0+1
ARM: socfpga: dts: add i2c busses
ARM: socfpga: dts: add remaining interrupts for pdma
ARM: socfpga: dts: fix pdma interrupt
Signed-off-by: Olof Johansson <olof@lixom.net>
Boris BREZILLON [Tue, 13 May 2014 14:03:03 +0000 (16:03 +0200)]
ARM: sunxi: dt: declare the r_pio pin controller for A31 SoC
The A31 SoC has a different pin controller for PL and PM banks.
Define this new controller in the device tree.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Boris BREZILLON [Wed, 14 May 2014 12:38:21 +0000 (14:38 +0200)]
ARM: sunxi: dt: add PRCM clk and reset controller subdevices
Add DT definitions for PRCM (Power/Reset/Clock Management) clock and reset
controller subdevices.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Geert Uytterhoeven [Wed, 14 May 2014 14:41:12 +0000 (16:41 +0200)]
ARM: shmobile: r8a7740 dtsi: Remove duplicate interrupt-parent property
Caused by interaction between commit
08ec67b50db7ca8c9077e67ca23850cdc5bfc716 ("ARM: shmobile: r8a7740 dtsi:
Add Ethernet support") and commit
9ff254adc1e32db46000a33b8ecbc4d7047672be
("ARM: shmobile: dts: Move interrupt-parent property to root node").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Boris BREZILLON [Tue, 13 May 2014 15:44:22 +0000 (17:44 +0200)]
ARM: sunxi: dt: add APP4-EVB1 board support
The APP4 EVB1 development boards embeds an A31, together with some NAND, one SD
card slot, and one SDIO + UART WiFi and Bluetooth chip, a few I2C buses, USB,
and a LCD display.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Maxime Ripard [Tue, 13 May 2014 15:44:21 +0000 (17:44 +0200)]
ARM: sun6i: dt: Add support for the USB controllers
The A31 has two ECHI/OHCI controllers, and one OHCI-only phy-less controller.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Maxime Ripard [Tue, 13 May 2014 15:44:16 +0000 (17:44 +0200)]
ARM: sun6i: Add the USB clocks to the DTSI
The USB clocks of the A31 seems to be parented to the 24MHz oscillator, and
handle the clocks for the USB phys and OHCI devices.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Simon Horman [Wed, 15 May 2013 02:57:30 +0000 (11:57 +0900)]
ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pull
This change makes the DTS consistent with the platform data
that exists in board-marzen.c.
Empirically it does not appear to be necessary.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 23 Apr 2014 08:25:28 +0000 (10:25 +0200)]
ARM: shmobile: r8a7791 dtsi: Add GPIO clocks
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 23 Apr 2014 08:25:27 +0000 (10:25 +0200)]
ARM: shmobile: r8a7790 dtsi: Add GPIO clocks
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 30 Apr 2014 00:41:28 +0000 (02:41 +0200)]
ARM: shmobile: dts: Move interrupt-parent property to root node
There's no need to duplicate the interrupt-parent property in all DT
nodes as the kernel automatically walks parent nodes to find the
property. Specify it once in the root node only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Grygorii Strashko [Mon, 12 May 2014 15:43:59 +0000 (11:43 -0400)]
ARM: dts: keystone-evm: add spi nor flash support
k2hk, k2e, k2l EVM board have the same Micron N25Q128A11
SPI NOR Flash installed on SPI0 bus.
The NOR Flash is splitted on two partistions:
partition@0
label = "u-boot-spl";
reg = <0x0 0x80000>;
partition@1
label = "misc";
reg = <0x80000 0xf80000>;
Hence, add SPI NOR Flash nodes to all k2hk, k2e, k2l EVM boards.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Hans de Goede [Mon, 12 May 2014 12:11:06 +0000 (14:11 +0200)]
ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board
The R7 tv-dongle is an A10s based hdmi tv dongle, with 1G RAM, 4G nand flash,
and rtl8189es sdio wifi. It has a standard male hdmi connector, an USB host
port using an USB-A receptacle and a micro-usb receptacle for both power
and USB OTG.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Wenyou Yang [Mon, 21 Apr 2014 04:29:07 +0000 (12:29 +0800)]
ARM: at91/dt: at91-sama5d3_xplained: add the regulator device node
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nicolas Ferre [Thu, 24 Apr 2014 15:34:14 +0000 (17:34 +0200)]
ARM: at91: add 2 PWM outputs to SAMA5D3 Xplained
Add PWM high output of channels 0 and 1 to PA20 PA22 pins.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nicolas Ferre [Thu, 24 Apr 2014 15:33:51 +0000 (17:33 +0200)]
ARM: at91: add PWM pinctrl to SAMA5D3
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Nicolas Ferre [Thu, 27 Mar 2014 10:44:11 +0000 (11:44 +0100)]
ARM: at91: add pull-up to i2c[02] on SAMA5D3 Xplained
As there are no pull-up resistors on the board itself it can be useful to
use the SoC pad pull-up to be able to easily connect usual i2c devices.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 23 Apr 2014 08:53:40 +0000 (10:53 +0200)]
ARM: at91/dt: sam9rl: Fix PLL output range and mck divisors
Argument 3 (OUT) and 4 (ICPLL) of the atmel,pll-clk-output-ranges were missing.
Also, the at91sam9rl doesn't really have a by 3 divisor.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 23 Apr 2014 08:53:39 +0000 (10:53 +0200)]
ARM: at91/dt: sam9261: Add ssc2, SSC clocks and pcks
Add ssc2 support, ssc2 pinctrl and clocks for the three SSCs.
Also add support for the programmable clocks.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 12 May 2014 14:22:12 +0000 (16:22 +0200)]
ARM: at91/dt: sam9261: Fix PLL output ranges and other clocks divisors
Argument 3 (OUT) and 4 (ICPLL) of the atmel,pll-clk-output-ranges were missing.
Also, the at91sam9261 doesn't really have a by 3 divisor.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Hans de Goede [Sun, 11 May 2014 07:46:57 +0000 (09:46 +0200)]
ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodes
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Sun, 11 May 2014 07:46:56 +0000 (09:46 +0200)]
ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Sun, 11 May 2014 07:46:55 +0000 (09:46 +0200)]
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Sun, 11 May 2014 07:46:54 +0000 (09:46 +0200)]
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Sun, 11 May 2014 07:46:53 +0000 (09:46 +0200)]
ARM: dts: sunxi: Add reg_vcc3v3 supply to sunxi-common-regulators.dtsi
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Geert Uytterhoeven [Wed, 7 May 2014 20:32:30 +0000 (22:32 +0200)]
ARM: shmobile: armadillo-reference dts: Add Ethernet support
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 7 May 2014 20:32:29 +0000 (22:32 +0200)]
ARM: shmobile: r8a7740 dtsi: Add Ethernet support
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Tue, 6 May 2014 20:47:59 +0000 (00:47 +0400)]
ARM: shmobile: henninger: add MSIOF0 DT support
Define the Henninger board dependent part of the MSIOF0 device node.
Add device node for Renesas R2A11302FT PMIC for which no bindings exist yet.
Based on the Koelsch MSIOF device tree patch by Geert Uytterhoeven.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Mon, 5 May 2014 22:45:31 +0000 (02:45 +0400)]
ARM: shmobile: henninger: add QSPI DT support
Define the Henninger board dependent part of the QSPI device node.
Add device nodes for Spansion S25FL512S SPI flash and MTD partitions on it.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Sat, 3 May 2014 17:04:34 +0000 (21:04 +0400)]
ARM: shmobile: henninger: add SDHI0/2 DT support
Define the Henninger board dependent part of the SDHI0/2 device nodes along with
the necessary voltage regulators (note that the Vcc regulators are dummy -- they
are required but don't actually exist on the board). Also, GPIOs have to be used
for the CD and WP signals due to the SDHI driver constraints...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Heiko Stuebner [Tue, 29 Apr 2014 20:02:52 +0000 (22:02 +0200)]
ARM: dts: rockchip: convert pinctrl nodes to new bindings
Introduce the grf syscon and convert the pinctrl drivers for rk3066 and rk3188
to use it, instead of mapping the grf registers themselfs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Max Schwarz <max.schwarz@online.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Beniamino Galvani [Tue, 6 May 2014 17:10:11 +0000 (19:10 +0200)]
ARM: dts: rockchip: add root compatible properties
Add the missing 'compatible' property to device tree root node of
- rk3066a-bqcurie2.dts
- rk3188-radxarock.dts
and document the new values.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Beniamino Galvani [Tue, 6 May 2014 17:10:10 +0000 (19:10 +0200)]
of: add mundoreader and radxa vendor prefixes
Add new vendor prefixes for:
* Mundo Reader S.L., a company that produces tablets and e-readers
* Radxa, manufacturer of ARM boards
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Ivan Khoronzhuk [Thu, 8 May 2014 21:31:01 +0000 (17:31 -0400)]
ARM: dts: k2l-evm: add AEMIF/NAND device entry
Add AEMIF/NAND device entry.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Ivan Khoronzhuk [Thu, 8 May 2014 21:19:08 +0000 (17:19 -0400)]
ARM: dts: k2e-evm: add AEMIF/NAND device entry
Add AEMIF/NAND device entry.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Santosh Shilimkar [Mon, 24 Feb 2014 21:42:19 +0000 (16:42 -0500)]
ARM: dts: keystone: Update USB node for dma properties
Keystone supports dma-coherent on USB master and also needs
dma-ranges to specify the hardware alias memory range in which DMA
can be operational.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Wed, 12 Feb 2014 17:20:16 +0000 (19:20 +0200)]
ARM: dts: keystone: Use dma-ranges property
The dma-ranges property has to be specified per bus and has format:
< DMA addr > - Base DMA address for Bus (Bus format 32-bits)
< CPU addr > - Corresponding base CPU address (CPU format 64-bits)
< DMA range size > - Size of supported DMA range
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Mon, 28 Apr 2014 12:20:22 +0000 (15:20 +0300)]
ARM: dts: keystone: add cell's information to spi nodes
SPI nodes should always have #address-cells and #size-cells defined,
otherwise warnings will be produced in case of adding any child
nodes to the SPI bus in DT:
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/spi@
21000400/n25q128a11@0
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/spi@
21000400/n25q128a11@0
Hence, ensure that all SPIx nodes have #address-cells and #size-cells
properties defined.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Tue, 8 Apr 2014 11:46:07 +0000 (14:46 +0300)]
ARM: dts: keystone: move i2c0 device node from SoC to board files
I2C devices are not the part of Keystone SoC and have to be
defined in board DTS files.
Hence, move i2c0 EEPROM device node from Keystone SoC to
k2hk, k2e, k2l EVM files as they all have similar EEPROM SoCs
installed.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Tue, 8 Apr 2014 11:46:06 +0000 (14:46 +0300)]
ARM: dts: keystone: add cell's information to i2c nodes
I2C nodes should always have #address-cells and #size-cells defined,
otherwise warnings will be produced in case of adding child
nodes to the I2C bus in DT:
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@
2530800/pca@20
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@
2530800/pca@20
Hence, ensure that all i2cX nodes have #address-cells and #size-cells
properties defined.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Lucas Stach [Mon, 14 Apr 2014 14:18:13 +0000 (16:18 +0200)]
ARM: dts: keystone: drop address and size cells from GIC node
This is likely a copy-and-paste error from the
ARM GIC documentation, that has already been fixed.
address-cells should have been set to 0, as with the size
cells. As having those properties set to 0 is the
same thing as not specifying them, drop them completely.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Dinh Nguyen [Wed, 16 Apr 2014 20:05:15 +0000 (15:05 -0500)]
ARM: socfpga: dts: Add div-reg to the main_pll clocks
The mpu_clk, main_clk, and dbg_base_clk outputs from the main PLL go through a
pre-divider. Update socfpga.dtsi to represent those dividers for these
clocks.
Re-use the "div-reg" property that was used for the socfpga-gate-clock as this
is the same thing. Also update the documentation.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Steffen Trumtrar [Tue, 15 Apr 2014 22:27:07 +0000 (17:27 -0500)]
ARM: socfpga: dts: add reset-controller
Add the necessary #reset-cells property to the rst-mgr node and
provide a header-file with all possible resets specified.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Steffen Trumtrar [Tue, 15 Apr 2014 22:19:12 +0000 (17:19 -0500)]
Documentation: dt: reset: move socfpga-reset
Instead of having the documentation for the socfpga-reset controller in a
vendor specific directory, move it to the reset folder to all the other
reset drivers.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Steffen Trumtrar [Tue, 15 Apr 2014 22:18:11 +0000 (17:18 -0500)]
Documentation: dt: socfpga: add reset-cells property
To be able to use the reset-controller framework, the property
#reset-cells
is mandatory.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Dinh Nguyen [Mon, 28 Oct 2013 14:48:32 +0000 (09:48 -0500)]
ARM: socfpga: dts: Add DTS entries for USB
Update all the SOCFPGA DTS files with USB entries.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Dinh Nguyen [Thu, 3 Apr 2014 02:14:57 +0000 (21:14 -0500)]
ARM: socfpga: dts: Remove hard coded clock-frequency property
The timers and uart can get their clock frequencies using the common clock
driver.
Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Dinh Nguyen [Wed, 2 Apr 2014 19:02:42 +0000 (14:02 -0500)]
ARM: socfpga: dts: add eeprom and rtc on i2c0
The Altera Cyclone5 and Arria5 devkit has an EEPROM and a RTC on the
board. This patch adds support for them.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
---
v2: Remove LCD as the driver has not been upstreamed.
Steffen Trumtrar [Thu, 3 Apr 2014 02:31:31 +0000 (21:31 -0500)]
ARM: socfpga: dts: convert to preprocessor includes
Convert all socfpga DT files to the dtc preprocessor include syntax.
This allows to include header files in the devicetrees like other
SoC-types already do.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Steffen Trumtrar [Wed, 2 Apr 2014 16:14:50 +0000 (11:14 -0500)]
ARM: socfpga: dts: add rtc on i2c0 to socrates
The SOCrates has an M41T82M RTC on i2c0. Add it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Steffen Trumtrar [Wed, 2 Apr 2014 16:13:11 +0000 (11:13 -0500)]
ARM: socfpga: dts: add support for EBV SOCrates
The SOCrates is a SOCFpga-Cyclone5 based board from EBV.
Add support for it.
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Steffen Trumtrar [Wed, 2 Apr 2014 16:11:26 +0000 (11:11 -0500)]
ARM: socfpga: dts: add can0+1
Add both can controllers to the dtsi.
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Steffen Trumtrar [Wed, 2 Apr 2014 16:05:31 +0000 (11:05 -0500)]
ARM: socfpga: dts: add i2c busses
Add all 4 i2c busses.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Steffen Trumtrar [Wed, 2 Apr 2014 15:40:30 +0000 (10:40 -0500)]
ARM: socfpga: dts: add remaining interrupts for pdma
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Steffen Trumtrar [Wed, 2 Apr 2014 15:39:35 +0000 (10:39 -0500)]
ARM: socfpga: dts: fix pdma interrupt
The first interrupt is not at 180 but 104. Fix it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Olof Johansson [Tue, 6 May 2014 01:44:12 +0000 (18:44 -0700)]
Merge tag 'renesas-dt2-for-v3.16' of git://git./linux/kernel/git/horms/renesas into next/dt
Merge "Second Round of Renesas ARM Based SoC DT Updates for v3.16" from Simon
Horman:
* Add r8a7791 (R-Car M2) based Henninger board
* tag 'renesas-dt2-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: henninger: enable SATA0
ARM: shmobile: henninger: add Ether DT support
ARM: shmobile: henninger: initial device tree
Signed-off-by: Olof Johansson <olof@lixom.net>
Chen-Yu Tsai [Fri, 2 May 2014 15:57:29 +0000 (17:57 +0200)]
ARM: dts: sun7i: Add basic support for the Cubietruck WiFi module
The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi
part is a BCM43362 IC connected to MMC3 in the A20 SoC via SDIO.
The IC also takes a power enable signal via GPIO.
The WiFi module supports out-of-band interrupt signaling via GPIO,
but this is not supported in this patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Olof Johansson [Mon, 5 May 2014 21:33:48 +0000 (14:33 -0700)]
Merge tag 'renesas-dt-for-v3.16' of git://git./linux/kernel/git/horms/renesas into next/dt
Merge "Renesas ARM Based SoC DT Updates for v3.16" from Simon Horman:
r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCs
* Add MSIOF nodes and aliases
* Correct I2C clock parents
r8a7791 (R-Car M2) SoC
* Add EHCI MSTP clock
r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards
* Add MSIOF nodes
* Add gpio-keys support for SW2
* Enable I2C
* Enable Quad SPI transfers for the SPI FLASH
* Rename and lable spi to qspi, add spi0 alias
* Set ethernet PHY LED mode
r8a7779 (R-Car H1) and r8a7778 (R-Car M2) SoCs
* Improve and correct HSPI nodes
r8a7778 (R-Car M2) based Bock-W board
* Add SPI FLASH
r8a7740 (R-Mobile A1) SoC
* Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings
r8a7740 (R-Mobile A1) based Armadillo800 EVA board
* Enable RTC
* Use KEY_* macros for gpio-keys
EMEV2 (Emma Mobile EV2) based kzm9g board
* Use KEY_* macros for gpio-keys
* tag 'renesas-dt-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits)
ARM: shmobile: armadillo-reference dts: Seiko Instruments, Inc is "sii"
ARM: shmobile: lager dts: Enable Quad SPI transfers for the SPI FLASH
ARM: shmobile: koelsch dts: Enable Quad SPI transfers for the SPI FLASH
ARM: shmobile: r8a7790: add IIC(B) cores to dtsi
ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi
ARM: shmobile: r8a7790: add IIC0-2 clock macros
ARM: shmobile: r8a7791: Fix the I2C clocks parents in DT
ARM: shmobile: r8a7790: Fix the I2C clocks parents in DT
ARM: shmobile: lager: Correct setting of ethernet PHY LED mode
ARM: shmobile: armadillo-reference dts: enable RTC
ARM: shmobile: r8a7791: Add EHCI MSTP clock
ARM: shmobile: Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings
ARM: shmobile: koelsch: activate i2c6 bus
ARM: shmobile: koelsch: make i2c2-pfc node unique
ARM: shmobile: r8a7791: add IIC(B) cores to dtsi
ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi
ARM: shmobile: r8a7791: add IIC0/1 clock macros
ARM: shmobile: kzm9g-reference dts: Use KEY_* macros for gpio-keys
ARM: shmobile: armadillo-reference dts: Use KEY_* macros for gpio-keys
ARM: shmobile: koelsch: Set ethernet PHY LED mode
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 5 May 2014 21:15:54 +0000 (14:15 -0700)]
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
Merge "at91: DT for 3.16 #1" from Nicolas Ferre:
3.16: first DT series:
- more support for at91sam9rl and its associated EK board
- some improvements to at91sam9g45 (ADC, TS, PWM leds)
- addition of some missing pieces for describing audio
of SAMA5D3-EK in DT
* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
ARM: at91: sama5d3: clock for ssc from rk pin
ARM: at91: sama5d3: add the missing property
ARM: at91: sama5d3: correct the sound compatible string
ARM: at91: sama5d3: disable sound by default
ARM: at91: sama5d3: add DMA property for SSC devices
ARM: at91/dt: at91sam9m10g45ek PWM leds polarity is inversed
ARM: at91/dt: at91sam9m10g45ek: add ADC and touchscreen support
ARM: at91/dt: sam9g45: improve ADC/touchscreen support
ARM: at91/dt: add peripherals to the at91sam9rlek board
ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support
Signed-off-by: Olof Johansson <olof@lixom.net>
Hans de Goede [Fri, 2 May 2014 15:57:28 +0000 (17:57 +0200)]
ARM: dts: sun7i: Enable mmc controller on various A20 boards
The cd pin settings have been taken from the original firmware fex files,
and have been confirmed to work on the actual boards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 2 May 2014 15:57:27 +0000 (17:57 +0200)]
ARM: dts: sun7i: Add pin-muxing info for the mmc controllers
This adds pin-muxing info for the mmc controller / port combinations which
are known to be used on actual boards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 2 May 2014 15:57:26 +0000 (17:57 +0200)]
ARM: dts: sun7i: Add mmc controller nodes
Add nodes for the 4 mmc controllers found on A20 SoCs to
arch/arm/boot/dts/sun7i-a20.dtsi.
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 2 May 2014 15:57:25 +0000 (17:57 +0200)]
ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9
Add a new sun6i-a31-m9 dts file for the Mele M9 / Mele A1000G Quad. These
HTPCs use the same board in a different case, for more details see:
http://linux-sunxi.org/Mele_M9
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 2 May 2014 15:57:24 +0000 (17:57 +0200)]
ARM: dts: sun6i: Add mmc controller nodes
Add nodes for the 4 mmc controllers found on A31 SoCs to
arch/arm/boot/dts/sun6i-a31.dtsi.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 2 May 2014 15:57:23 +0000 (17:57 +0200)]
ARM: dts: sun6i: Add mmc clocks
Add clk-nodes for the mmc clocks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 2 May 2014 15:57:22 +0000 (17:57 +0200)]
ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boards
The cd pin settings have been taken from the original firmware fex files,
and have been confirmed to work on the actual boards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
David Lanzendörfer [Fri, 2 May 2014 15:57:21 +0000 (17:57 +0200)]
ARM: dts: sun5i: Add mmc controller nodes
Add nodes for the 3 mmc controllers found on A10s SoCs and for the 2 mmc
controllers found on A13 SoCs.
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 2 May 2014 15:57:20 +0000 (17:57 +0200)]
ARM: dts: sun4i: Enable mmc controller on various A10 boards
Tested on a subset of these boards, for the others boards the settings match
the ones of the tested boards according to the original firmware fex files.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 2 May 2014 15:57:19 +0000 (17:57 +0200)]
ARM: dts: sun4i: Add pin-muxing info for the mmc0 controller
mmc0 is the only controller actually being used on boards, so limit the
pin-muxing options to that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
David Lanzendörfer [Fri, 2 May 2014 15:57:18 +0000 (17:57 +0200)]
ARM: dts: sun4i: Add mmc controller nodes
Add nodes for the 4 mmc controllers found on A10 SoCs to
arch/arm/boot/dts/sun4i-a10.dtsi.
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Andrew Lunn [Sat, 3 May 2014 18:30:17 +0000 (20:30 +0200)]
ARM: Kirkwood: t5325: Use simple card to instantiate audio
Add device tree nodes to instantiate the audio drivers on the HP T5325
device.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1399141819-23924-8-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Andrew Lunn [Sat, 3 May 2014 18:30:14 +0000 (20:30 +0200)]
ARM: Kirkwood: DT: Add missing #sound-dai-cells property
The sound node is missing a #sound-dai-cells property. Add it, so that
the sounds node can be used in combination with the simple-audio-card
binding.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1399141819-23924-5-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Andrew Lunn [Sat, 3 May 2014 18:30:13 +0000 (20:30 +0200)]
ARM: Kirkwood: Add node for audio codec
Instantiate the audio codec via a DT node.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1399141819-23924-4-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Linus Torvalds [Mon, 5 May 2014 01:14:42 +0000 (18:14 -0700)]
Linux 3.15-rc4
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:42 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id
Ethernet PHYs found on Globalscale Guruplug are connected by RGMII-ID.
Set the corresponding phy-connection-type property accordingly.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-16-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:41 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set Guruplug ethernet PHY compatible
Ethernet PHY compatible shall be "ethernet-phy-ieee802.3-c22" and
"ethernet-phy-idAAAA.BBBB" if PHY OUI id is known. We know it for
the PHY found on Guruplug, so set it accordingly.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-15-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:40 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
Currently, the only 6282-based Kirkwood boards that use I2C1 are Openblocks
A6/A7. Both use the same default I2C1 pinctrl setting from kirkwood-6282.dtsi.
Move the pinctrl setting to the I2C1 node directly and put a note in front of
the corresponding pinctrl node to overwrite the setting on board level.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-14-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:39 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for I2C0
There is only one valid pinctrl setting for I2C0 on Kirkwood. Now that we
have the setting in the common SoC pinctrl, move it to the I2C0 controller
node directly and remove it from the individual boards.
While at it, also fix up status = "okay" to "ok" on one board's I2C0 node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-13-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:38 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for NAND
There is only one valid pinctrl setting for NAND on Kirkwood. Now that we
have the setting in the common SoC pinctrl, move it to the NAND controller
node directly and remove it from the individual boards.
While at it, also fix up status = "okay" to "ok" on one board's NAND node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-12-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:37 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for SPI0
Most Kirkwood boards use the default SPI0 pinctrl setting anyway. Add a
default pinctrl setting to the toplevel SoC SPI0 node and put a note
in front of the corresponding pinctrl node to overwrite the setting
on board level.
Currently, only T5325 is using a different setting and already
overwrites the corresponding pinctrl node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-11-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:36 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for UART0/1
Most boards use the default UART0/1 pinctrl setting without RTS/CTS.
Add the pinctrl setting to the toplevel SoC UART nodes and put a note
in front of the corresponding pinctrl node to overwrite the setting
on board level. Currently, both boards using a different UART pinctrl
setting (Openblocks A6, A7) already overwrite the pinctrl node.
While at it, also fix up some status = "ok" to "okay" and again
whitespace issues on mplcec4 uart nodes.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-10-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:35 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for GBE1
On Kirkwood, there is only one valid pinctrl setting for GBE1. With
a common SoC pinctrl node, we can now set it in the node instead of
in each board file.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-9-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:34 +0000 (14:56 +0200)]
ARM: dts: kirkwood: consolidate common pinctrl settings
All SoCs have the same pinctrl setting for NAND, UART0/1, SPI, TWSI0,
and GBE1. Move it to the common pinctrl node that we now have.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-8-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:33 +0000 (14:56 +0200)]
ARM: dts: kirkwood: add pinctrl node to common SoC include
All Kirkwood SoCs have their pinctrl registers at the same address.
Instead of replaying the same reg property on each SoC, have the
reg property set in the common SoC file already. This also allows
us to move common pinctrl settings to this node later on.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-7-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:32 +0000 (14:56 +0200)]
ARM: dts: kirkwood: rename pin-controller nodes
To prepare pin-controller consolidation, first rename all pinctrl nodes
to a more appropriate name regarding ePAPR recommended names.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-6-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:31 +0000 (14:56 +0200)]
ARM: dts: kirkwood: remove clock-frequency properties from UART nodes
UART devices found on Kirkwood SoCs derive their baudrate from TCLK.
With proper clocks property in the SoCs serial node, boards do not
need to overwrite it anymore.
Remove the remaining clock-frequency property from all Kirkwood boards.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-5-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:30 +0000 (14:56 +0200)]
ARM: dts: kirkwood: add stdout-path property to all boards
ePAPR allows to reference the device used for console output by
stdout-path property. With node labels for Kirkwood UART0, now
reference it on all Kirkwood boards that already have ttyS0 in
their bootargs property.
While at it, fix some whitespace issues on mplcec4's chosen node
(there are more, but we only fix the chosen node now)
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-4-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:29 +0000 (14:56 +0200)]
ARM: dts: kirkwood: add node labels
This adds missing node labels to Kirkwood common and SoC specific nodes
to allow to reference them more easily.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-3-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Linus Torvalds [Sun, 4 May 2014 21:36:52 +0000 (14:36 -0700)]
Merge tag 'locks-v3.15-3' of git://git.samba.org/jlayton/linux
Pull file locking change from Jeff Layton:
"Only an email address change to the MAINTAINERS file"
* tag 'locks-v3.15-3' of git://git.samba.org/jlayton/linux:
MAINTAINERS: email address change for Jeff Layton
Linus Torvalds [Sun, 4 May 2014 21:34:50 +0000 (14:34 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"These are mostly arm64 fixes with an additional arm(64) platform fix
for the initialisation of vexpress clocks (the latter only affecting
arm64; the arch/arm64 code is SoC agnostic and does not rely on early
SoC-specific calls)
- vexpress platform clocks initialisation moved earlier following the
arm64 move of of_clk_init() call in a previous commit
- Default DMA ops changed to non-coherent to preserve compatibility
with 32-bit ARM DT files. The "dma-coherent" property can be used
to explicitly mark a device coherent. The Applied Micro DT file
has been updated to avoid DMA cache maintenance for the X-Gene SATA
controller (the only arm64 related driver with such assumption in
-rc mainline)
- Fixmap correction for earlyprintk
- kern_addr_valid() fix for huge pages"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
vexpress: Initialise the sysregs before setting up the clocks
arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent
arm64: Use bus notifiers to set per-device coherent DMA ops
arm64: Make default dma_ops to be noncoherent
arm64: fixmap: fix missing sub-page offset for earlyprintk
arm64: Fix for the arm64 kern_addr_valid() function
Linus Torvalds [Sun, 4 May 2014 21:31:51 +0000 (14:31 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is two patches both fixing bugs in drivers (virtio-scsi and
mpt2sas) causing an oops in certain circumstances"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] virtio-scsi: Skip setting affinity on uninitialized vq
[SCSI] mpt2sas: Don't disable device twice at suspend.
Catalin Marinas [Mon, 28 Apr 2014 16:08:37 +0000 (17:08 +0100)]
vexpress: Initialise the sysregs before setting up the clocks
Following arm64 commit
bc3ee18a7a57 (arm64: init: Move of_clk_init to
time_init()), vexpress_osc_of_setup() is called via of_clk_init() long
before initcalls are issued. Initialising the vexpress oscillators
requires the vespress sysregs to be already initialised, so this patch
adds an explicit call to vexpress_sysreg_of_early_init() in vexpress
oscillator setup function.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Cc: Mike Turquette <mturquette@linaro.org>
Catalin Marinas [Fri, 25 Apr 2014 15:39:49 +0000 (16:39 +0100)]
arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent
Since the default DMA ops for arm64 are non-coherent, mark the X-Gene
controller explicitly as dma-coherent to avoid additional cache
maintenance.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Loc Ho <lho@apm.com>
Catalin Marinas [Fri, 25 Apr 2014 14:31:45 +0000 (15:31 +0100)]
arm64: Use bus notifiers to set per-device coherent DMA ops
Recently, the default DMA ops have been changed to non-coherent for
alignment with 32-bit ARM platforms (and DT files). This patch adds bus
notifiers to be able to set the coherent DMA ops (with no cache
maintenance) for devices explicitly marked as coherent via the
"dma-coherent" DT property.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This page took 0.047969 seconds and 5 git commands to generate.