Nick Clifton [Wed, 18 Apr 2018 11:03:03 +0000 (12:03 +0100)] 
Prevent an assertion failure in readelf & objdump when parsing corrupt DWARF information.
PR 23062
* dwarf.c (read_and_display_attr_value): Replace assertions with
test and warning message.
Nick Clifton [Wed, 18 Apr 2018 11:02:17 +0000 (12:02 +0100)]
Updated Spanish translation for gprof directory
Nick Clifton [Wed, 18 Apr 2018 09:48:56 +0000 (10:48 +0100)]
Updated Spanish translations for the gold and gprof sub-directories
Alan Modra [Wed, 18 Apr 2018 06:09:34 +0000 (15:39 +0930)] 
Remove mips aout, coff, and pe support
include/coff/mips.h needs to stay for ecoff debug support.
include/
* coff/mipspe.h: Delete.
bfd/
* Makefile.am: Remove mips aout, coff, and pe support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* coff-mips.c: Delete
* mipsbsd.c: Delete
* pe-mips.c: Delete
* pei-mips.c: Delete
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
H.J. Lu [Wed, 18 Apr 2018 01:15:13 +0000 (18:15 -0700)] 
x86: Don't define elf32_bed/elf64_bed variables
Define elf32_bed and elf64_bed before including "elf32-target.h" and
"elf64-target.h" to avoid local elf32_bed and elf64_bed variables.
* elf32-i386.c (elf32_bed): Define before including
"elf32-target.h".
* elf64-x86-64.c (elf64_bed): Define before including
"elf64-target.h".
(elf32_bed): Define before including "elf32-target.h".
H.J. Lu [Wed, 18 Apr 2018 00:42:19 +0000 (17:42 -0700)]
elf32_bed/elf64_bed
H.J. Lu [Wed, 18 Apr 2018 01:11:21 +0000 (18:11 -0700)]
x86: Use a normal input file with compatible relocation
Use a normal input file with compatible relocation to hold linker
created sections,
PR ld/23055
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Use a
normal input file with compatible relocation.
Alan Modra [Mon, 16 Apr 2018 12:44:01 +0000 (22:14 +0930)]
various i386-aout and i386-coff target removal
Also tidies some other aout leftovers in binutils-common.exp.
bfd/
* Makefile.am: Remove support for assorted i386 aout and coff targets.
* config.bfd: Likewise.
* configure.ac: Likewise.
* doc/bfdint.texi: Likewise.
* targets.c: Likewise.
* freebsd.h: Delete.
* i386dynix.c: Delete.
* i386freebsd.c: Delete.
* i386linux.c: Delete.
* i386mach3.c: Delete.
* i386netbsd.c: Delete.
* i386os9k.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/lib/binutils-common.exp: Remove support for assorted
aout targets.
gas/
* Makefile.am: Remove support for assorted i386 aout and coff targets.
* config/obj-elf.c: Likewise.
* config/tc-i386.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* config/te-dynix.h: Delete.
* config/te-i386aix.h: Delete.
* config/te-mach.h: Delete.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
include/
* aout/dynix3.h: Delete.
ld/
* Makefile.am: Remove support for assorted i386 aout and coff targets.
* configure.tgt: Likewise.
* testsuite/ld-discard/discard.exp: Likewise.
* testsuite/ld-elf/binutils.exp: Likewise.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-gc/abi-note.d: Likewise.
* testsuite/ld-gc/pr19167.d: Likewise.
* testsuite/ld-gc/pr20022.d: Likewise.
* testsuite/ld-gc/start.d: Likewise.
* testsuite/ld-gc/stop.d: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-ifunc/binutils.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-linkonce/linkonce.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-scripts/empty-address-2a.d: Likewise.
* testsuite/ld-scripts/empty-address-2b.d: Likewise.
* testsuite/ld-scripts/phdrs2.exp: Likewise.
* testsuite/ld-scripts/section-match-1.d: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-size/size.exp: Likewise.
* testsuite/ld-sparc/sparc.exp: Likewise.
* emulparams/i386coff.sh: Delete.
* emulparams/i386linux.sh: Delete.
* emulparams/i386mach.sh: Delete.
* emulparams/i386nbsd.sh: Delete.
* emulparams/vsta.sh: Delete.
* scripttempl/i386coff.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Tue, 17 Apr 2018 07:44:45 +0000 (17:14 +0930)]
Tidy gas/configure.tgt
Should have been removed with m68k bsd support.
* configure.tgt: Remove *-*-bsd* entry.
Alan Modra [Wed, 18 Apr 2018 00:00:17 +0000 (09:30 +0930)]
Correct ChangeLog dates for git commit
3f0a5f17d7f
GDB Administrator [Wed, 18 Apr 2018 00:00:29 +0000 (00:00 +0000)] 
Automatic date update in version.in
Michael Eager [Tue, 17 Apr 2018 21:47:13 +0000 (14:47 -0700)] 
[MicroBlaze] PIC data text relative
Andrew Sadek <andrew.sadek.se@gmail.com>
A new implemented feature in GCC Microblaze that allows Position
Independent Code to run using Data Text Relative addressing instead
of using Global Offset Table.
Its aim was to make 'PIC' more efficient and flexible as elf size
excess performance overhead were noticed when using GOT due to the
indirect addressing.
include/ChangeLog:
* bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct.
* elf/microblaze.h (Add 3 new relocations):
R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64
and R_MICROBLAZE_TEXTREL_32_LO for relax function.
bfd/ChangeLog:
* bfd/reloc.c (2 new BFD relocations):
BFD_RELOC_MICROBLAZE_64_TEXTPCREL &
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
* bfd/bfd-in2.h: Regenerate
* bfd/libbfd.h: Regenerate
* bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3
new relocs and handle them in both relocate and relax functions.
(microblaze_elf_reloc_type_lookup): add mapping between for new
bfd relocs.
(microblaze_elf_relocate_section): Handle new relocs in case of
elf relocation.
(microblaze_elf_relax_section): Handle new relocs for elf relaxation.
gas/ChangeLog:
* gas/config/tc-microblaze.c (Handle new relocs directives in
assembler): Handle new relocs from compiler output.
(imm_types): add new imm types for data text relative addressing
TEXT_OFFSET, TEXT_PC_OFFSET
(md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_estimate_size_before_relax): estimate size for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(tc_gen_reloc): generate relocations for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
ld/ChangeLog:
* ld/lexsup.c (Add 2 ld options):
(ld_options): add disable-multiple-abs-defs @ 'ld_options' array
(parse_args): parse new option and pass flag to 'link_info' struct.
* ld/ldlex.h (Add enum): add new enum @ 'option_values' enum.
* ld/ld.texinfo (Add new option): Add description for
'disable-multiple-abs-defs'
* ld/main.c: Initialize flags with false @ 'main'. Handle
disable-multiple-abs-defs @ 'mutiple_definition'.
Tom Tromey [Thu, 12 Apr 2018 14:05:16 +0000 (08:05 -0600)] 
Conditionally drop the discriminant field in quirk_rust_enum
While debugging the crash that Jan reported, I noticed that in some
situations we could end up with a situation where one branch of a Rust
enum type ended up with a field count of -1.
The fix is simple: only conditionally drop the discriminant field when
rewriting the enum variants.
I couldn't find a way to test this; I only noticed it while debugging
the DWARF reader.
2018-04-17 Tom Tromey <tom@tromey.com>
* dwarf2read.c (quirk_rust_enum): Conditionally drop the
discriminant field.
Tom Tromey [Thu, 29 Mar 2018 17:49:59 +0000 (11:49 -0600)]
Fix crash in quirk_rust_enum
I noticed that quirk_rust_enum can crash when presented with a union
whose fields are all scalar types.
This patch adds a new test case and fixes the bug.
Regression tested on Fedora 26 x86-64.
2018-04-17 Tom Tromey <tom@tromey.com>
* dwarf2read.c (quirk_rust_enum): Handle unions correctly.
2018-04-17 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.rs (Union): New type.
(main): New local "u".
* gdb.rust/simple.exp (test_one_slice): Add new test case.
Andreas Arnez [Tue, 17 Apr 2018 17:31:58 +0000 (19:31 +0200)] 
Don't print symbol declaration's line number in rbreak output
This commit:
b744723f57 -- Show line numbers in output for "info var/func/type"
adds the symbol declaration's line number to the output of certain GDB
commands. It also (inadvertently) changes the `rbreak' command's output,
like this:
(gdb) rbreak foo
Breakpoint 1 at 0x40049b: file rbreak.c, line 6.
4: static int foo1(void);
Breakpoint 2 at 0x4004b1: file rbreak.c, line 12.
10: static int foo2(void);
(gdb)
where the function declaration is now prefixed by its source line number,
followed by a colon. But without showing the declaration's file name, the
line number is useless and can possibly cause severe confusion.
No declaration line number was shown before. Instead, the function
declaration started at the first column:
(gdb) rbreak foo
Breakpoint 1 at 0x40049b: file rbreak.c, line 6.
static int foo1(void);
Breakpoint 2 at 0x4004b1: file rbreak.c, line 12.
static int foo2(void);
(gdb)
This old behavior is restored, fixing some FAILs in fullpath-expand.exp,
realname-expand.exp, and pr10179.exp.
In order to distinguish when to print location information, the meaning of
print_symbol_info()'s parameter `last' is changed. Now NULL means to skip
any filename or line number information. Previously NULL meant to always
print the filename.
gdb/ChangeLog:
* symtab.c (print_symbol_info): Skip printing filename and line
number when `last' is NULL.
(symtab_symbol_info): Use empty string instead of NULL for first
invocation of print_symbol_info.
(rbreak_command): Pass NULL to `last' parameter of
print_symbol_info.
Nick Clifton [Tue, 17 Apr 2018 16:47:51 +0000 (17:47 +0100)]
Fix illegal memory accesses trigeered when linking corrupt input files.
PR 23055
* aoutx.h (find_nearest_line): Check that the symbol name exists
and is long enough, before attempting to see if it is for a .o
file.
* hash.c (bfd_hash_hash): Add an assertion that the string is not
NULL.
* linker.c (bfd_link_hash_lookup): Fail if the table or string are
NULL.
(_bfd_generic_link_add_archive_symbols): Fail if an archive entry
has no name.
Nick Clifton [Tue, 17 Apr 2018 15:19:19 +0000 (16:19 +0100)]
Fix typo in ChangeLog entry in previous delta.
PR 23063
* readelf.c (print_symbol): If the width is zero, return straight
away.
Nick Clifton [Tue, 17 Apr 2018 15:15:03 +0000 (16:15 +0100)]
Remove an abort() from the readelf sources.
PR 26063
* readelf.c (print_symbol): If the width is zero, return straight
away.
Nick Clifton [Tue, 17 Apr 2018 13:30:07 +0000 (14:30 +0100)]
Add a check for a NULL table pointer before attempting to compute a DWARF filename.
PR 23065
* dwarf2.c (concat_filename): Check for a NULL table pointer.
Nick Clifton [Tue, 17 Apr 2018 12:53:38 +0000 (13:53 +0100)]
Resync libiberty sources with master version in GCC repository.
2018-04-13 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
PR lto/81968
* simple-object.c (handle_lto_debug_sections): Keep .comment
section.
2018-03-02 David Malcolm <dmalcolm@redhat.com>
* cp-demangle.c: Update URL for g++ V3 ABI.
2018-01-20 Eli Zaretskii <eliz@gnu.org>
* simple-object-xcoff.c (simple_object_xcoff_find_sections): Use
ulong_type to avoid warning about 32-bit shift.
2018-01-11 Richard Biener <rguenther@suse.de>
Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
PR lto/81968
* simple-object-common.h (struct simple_object_functions):
Change copy_lto_debug_sections callback signature.
* simple-object-elf.c (SHN_HIRESERVE, SHT_SYMTAB_SHNDX,
SHF_INFO_LINK): Add defines.
(simple_object_elf_copy_lto_debug_sections): Instead of
leaving not to be copied sections empty unnamed SHT_NULL
remove them from the target section headers and adjust section
reference everywhere. Handle SHN_XINDEX in the symbol table
processing properly.
* simple-object.c (handle_lto_debug_sections): Change
interface to return a modified string and handle renaming
of relocation sections.
2018-01-10 Daniel van Gerpen <daniel@vangerpen.de>
* argv.c (expandargv): Correct check for dynamically
allocated argv.
Igor Tsimbalist [Tue, 17 Apr 2018 11:57:34 +0000 (13:57 +0200)] 
Fix tests to avoid cldemote encoding.
gas/
* testsuite/gas/i386/nops.s: Revert back deleted lines and
change encoding to 0x0f1c /1 to map to NOP.
* testsuite/gas/i386/x86-64-nops.s: Likewise.
* testsuite/gas/i386/nops.d: Likewise.
* testsuite/gas/i386/x86-64-nops.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-nops.d: Likewis.
Nick Clifton [Tue, 17 Apr 2018 11:35:55 +0000 (12:35 +0100)]
Fix illegal memory access when parsing corrupt DWARF information.
PR 23064
* dwarf.c (process_cu_tu_index): Test for a potential buffer
overrun before copying signature pointer.
Igor Tsimbalist [Mon, 16 Apr 2018 21:09:01 +0000 (23:09 +0200)]
Enable Intel CLDEMOTE instruction.
gas/
* config/tc-i386.c (cpu_arch): Add .cldemote.
* doc/c-i386.texi: Document cldemote/.cldemote.
* testsuite/gas/i386/cldemote-intel.d: New.
* testsuite/gas/i386/cldemote.d: Likewise.
* testsuite/gas/i386/cldemote.s: Likewise.
* testsuite/gas/i386/i386.exp: Run new tests.
* testsuite/gas/i386/x86-64-cldemote-intel.d: New.
* testsuite/gas/i386/x86-64-cldemote.d: Likewise.
* testsuite/gas/i386/x86-64-cldemote.s: Likewise.
* testsuite/gas/i386/ilp32/x86-64-nops.d: Remove 0x0f1c
NOP encoding that maps to cldemote.
* testsuite/gas/i386/nops.d: Likewise.
* testsuite/gas/i386/nops.s: Likewise.
* testsuite/gas/i386/x86-64-nops.d: Likewise.
* testsuite/gas/i386/x86-64-nops.s: Likewise.
opcode/
* i386-dis.c: Add REG_0F1C_MOD_0, MOD_0F1C_PREFIX_0,
PREFIX_0F1C.
* i386-gen.c (cpu_flag_init): Add CPU_CLDEMOTE_FLAGS,
(cpu_flags): Add CpuCLDEMOTE.
* i386-init.h: Regenerate.
* i386-opc.h (enum): Add CpuCLDEMOTE,
(i386_cpu_flags): Add cpucldemote.
* i386-opc.tbl: Add cldemote.
* i386-tbl.h: Regenerate.
Alan Modra [Mon, 16 Apr 2018 23:30:57 +0000 (09:00 +0930)]
Reinstate readelf decoding of i860, i960 and i370 relocs
include/
* elf/i370.h: Revert removal.
* elf/i860.h: Likewise.
* elf/i960.h: Likewise.
binutils
* readelf.c: Revert 2018-04-16 and 2018-04-11 changes.
GDB Administrator [Tue, 17 Apr 2018 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Mon, 16 Apr 2018 20:47:06 +0000 (16:47 -0400)] 
linux_spu_make_corefile_notes: return note_data instead of nullptr
Since commit
9018be2 ("Make target_read_alloc & al return vectors")
the test gdb.threads/gcore-stale-thread.exp test results in UNSUPPORTED:
UNSUPPORTED: gdb.threads/gcore-stale-thread.exp: save a corefile
The problem is that the linux_spu_make_corefile_notes started returning
nullptr when reading TARGET_OBJECT_SPU fails. The previous (and proper)
behaviour is to return the note_data received as a parameter, so that
other functions may continue to append to this buffer.
With this patch, the test goes back to PASS.
gdb/ChangeLog:
* linux-tdep.c (linux_spu_make_corefile_notes): Return note_data
instead of nullptr.
Andreas Arnez [Mon, 16 Apr 2018 18:58:14 +0000 (20:58 +0200)]
Adjust more test cases to changed output of info var/func/type
After this commit:
b744723f57 -- Show line numbers in output for "info var/func/type"
the test cases dbx.exp and info-fun.exp yield new FAILs because two
regular expressions have not been adjusted to the changed output yet.
This is fixed.
gdb/testsuite/ChangeLog:
* gdb.base/dbx.exp (test_whereis): Adjust regexp to added line
number information in output of "whereis" command.
* gdb.base/info-fun.exp: Likewise, for "info fun" command.
Nick Clifton [Mon, 16 Apr 2018 15:39:15 +0000 (16:39 +0100)]
Fix illegal memory accesses in the assembler when attempting to parse corrup tinput files.
PR 23054
* cond.c (s_ifsef): Replace use of obstack_copy with obstack_alloc
followed by memcpy.
(s_if, s_ifb, s_ifc, s_ifeqs): Likewise.
* obj-elf.c (elf_adjust_symtab): Check for local symbols before
attempting to dereference the sy_next field of a symbol.
* stabs.c (get_stab_string_offset): Fail if there is no string
following the stab directive.
Alan Modra [Mon, 16 Apr 2018 12:45:14 +0000 (22:15 +0930)]
Remove sunos.em
Should have been removed with the m68k and sparc aout targets.
* emultempl/sunos.em: Delete.
Alan Modra [Mon, 16 Apr 2018 13:51:58 +0000 (23:21 +0930)]
Fix i960 machine name
* readelf.c (get_machine_name): Correct typo.
Pedro Alves [Mon, 16 Apr 2018 11:50:03 +0000 (12:50 +0100)] 
gdb: Remove support for SH-5/SH64
Since bfd dropped support for SH-5, there's no point in keeping it in
GDB either.
This restores --enable-targets=all builds.
gdb/ChangeLog:
2018-04-16 Pedro Alves <palves@redhat.com>
* MAINTAINERS (sh): Remove.
* Makefile.in (ALL_TARGET_OBS): Remove sh64-tdep.o.
(HFILES_NO_SRCDIR): Remove sh64-tdep.h.
(ALLDEPFILES): Remove sh64-tdep.c.
* NEWS: Mentions that support for SH-5/SH64 is removed.
* configure.tgt (sh*-*-linux*): Remove reference to sh64-tdep.o.
(sh*-*-openbsd*): Ditto.
(sh64-*-elf*): Remove.
(sh*): Remove.
* regcache.c (cooked_write_test): Remove bfd_mach_sh5 case.
* sh-linux-tdep.c: Remove reference to bfd_mach_sh5.
* sh-tdep.c: No longer include "sh64-tdep.h".
(sh_gdbarch_init): Remove reference to bfd_mach_sh5.
* sh64-tdep.c, sh64-tdep.h: Remove files.
Pedro Alves [Mon, 16 Apr 2018 12:16:22 +0000 (13:16 +0100)]
gdb: Remove OpenBSD/m88k support
Support for m88k was fully removed from bfd, which broke gdb
--enable-targets=all builds:
> gdb/m88k-tdep.c: In function void _initialize_m88k_tdep():
> gdb/m88k-tdep.c:867:21: error: bfd_arch_m88k was not declared in this scope
> gdbarch_register (bfd_arch_m88k, m88k_gdbarch_init, NULL);
There's no point in keeping GDB support for OpenBSD/m88k with no bfd
support, so this commit simply removes the port.
gdb/ChangeLog:
2018-04-16 Pedro Alves <palves@redhat.com>
* MAINTAINERS: Remove m88k.
* Makefile.in (ALL_TARGET_OBS): Remove m88k-tdep.o.
(HFILES_NO_SRCDIR): Remove m88k-tdep.h.
(ALLDEPFILES): Remove m88k-bsd-nat.c and m88k-tdep.c.
* NEWS: Mention that support for OpenBSD/m88k was removed.
* configure.host (m88*-*-*): Remove support.
* configure.nat (m88k-*-*): Remove support.
* configure.tgt (m88*-*-openbsd*): Remove.
* m88k-bsd-nat.c, m88k-tdep.c, m88k-tdep.h: Delete.
Nick Clifton [Mon, 16 Apr 2018 11:59:37 +0000 (12:59 +0100)]
Prevent an illegal memory access via an out of range fixup pointer.
PR 23061
* coffgen.c (coff_pointerize_aux): Check for an out of range
fixup.
Alan Modra [Mon, 16 Apr 2018 10:59:05 +0000 (20:29 +0930)]
Remove arm-epoc-pe support
bfd/
* Makefile.am: Remove arm-epoc-pe support.
* coff-arm.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* epoc-pe-arm.c: Delete.
* epoc-pei-arm.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* configure.ac: Remove arm-epoc-pe support.
* dlltool.c: Likewise.
* configure: Regenerate.
gas/
* Makefile.am: Remove arm-epoc-pe support.
* config/tc-arm.h: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/all/gas.exp: Likewise.
* testsuite/gas/arm/local_label_coff.d: Likewise.
* testsuite/gas/arm/undefined.d: Likewise.
* testsuite/gas/arm/undefined_coff.d: Likewise.
* config/te-epoc-pe.h: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove arm-epoc-pe support.
* configure.tgt: Likewise.
* emultempl/pe.em: Likewise.
* pe-dll.c: Likewise.
* testsuite/ld-scripts/fill.d: Likewise.
* testsuite/ld-scripts/fill16.d: Likewise.
* emulparams/arm_epoc_pe.sh: Delete.
* scripttempl/epocpe.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 10:55:42 +0000 (20:25 +0930)]
sparc-coff removal leftover
* coff/sparc.h: Delete.
Alan Modra [Mon, 16 Apr 2018 06:03:26 +0000 (15:33 +0930)]
Remove sparc-aout and sparc-coff support
bfd/
* Makefile.am: Remove sparc-aout and sparc-coff support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* aout-sparcle.c: Delete.
* aoutf1.h: Delete.
* cf-sparclynx.c: Delete.
* coff-sparc.c: Delete.
* demo64.c: Delete.
* sparclinux.c: Delete.
* sparclynx.c: Delete.
* sparcnetbsd.c: Delete.
* sunos.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/lib/binutils-common.exp: Remove sparc-aout and
sparc-coff support.
gas/
* Makefile.am: Remove sparc-aout and sparc-coff support.
* config/obj-coff.h: Likewise.
* config/tc-sparc.c: Likewise.
* config/tc-sparc.h: Likewise.
* configure.tgt: Likewise.
* config/te-sparcaout.h: Delete.
* testsuite/gas/sun4/addend.d: Delete.
* testsuite/gas/sun4/addend.exp: Delete.
* testsuite/gas/sun4/addend.s: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove sparc-aout and sparc-coff support.
* configure.tgt: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* emulparams/coff_sparc.sh: Delete.
* emulparams/sparcaout.sh: Delete.
* emulparams/sparclinux.sh: Delete.
* emulparams/sparcnbsd.sh: Delete.
* emulparams/sun4.sh: Delete.
* scripttempl/sparccoff.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 06:01:36 +0000 (15:31 +0930)]
Remove m68k-aout and m68k-coff support
include/
* aout/host.h: Remove m68k-aout and m68k-coff support.
* aout/hp300hpux.h: Delete.
* coff/apollo.h: Delete.
* coff/aux-coff.h: Delete.
* coff/m68k.h: Delete.
bfd/
* Makefile.am: Remove m68k-aout and m68k-coff support.
* aoutf1.h: Likewise.
* aoutx.h: Likewise.
* archive.c: Likewise.
* bfd-in.h: Likewise.
* bfd.c: Likewise.
* coffcode.h: Likewise.
* coffswap.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* configure.host: Likewise.
* doc/bfd.texinfo: Likewise.
* doc/bfdint.texi: Likewise.
* freebsd.h: Likewise.
* gen-aout.c: Likewise.
* hpux-core.c: Likewise.
* libaout.h: Likewise.
* libbfd-in.h: Likewise.
* pdp11.c: Likewise.
* peicode.h: Likewise.
* riscix.c: Likewise.
* targets.c: Likewise.
* aout0.c: Delete.
* coff-apollo.c: Delete.
* coff-aux.c: Delete.
* coff-m68k.c: Delete.
* coff-svm68k.c: Delete.
* coff-u68k.c: Delete.
* hosts/delta68.h: Delete.
* hosts/hp300bsd.h: Delete.
* hosts/m68kaux.h: Delete.
* hosts/news.h: Delete.
* hp300bsd.c: Delete.
* hp300hpux.c: Delete.
* liboasys.h: Delete.
* m68k4knetbsd.c: Delete.
* m68klinux.c: Delete.
* m68knetbsd.c: Delete.
* oasys.c: Delete.
* versados.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff
support.
* testsuite/binutils-all/copy-3.d: Likewise.
* testsuite/binutils-all/objcopy.exp: Likewise.
* testsuite/lib/binutils-common.exp: Likewise.
gas/
* Makefile.am: Remove m68k-aout and m68k-coff support.
* config/tc-m68k.c: Likewise.
* config/tc-m68k.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/all/weakref1u.d: Likewise.
* testsuite/gas/m68k/all.exp: Likewise.
* testsuite/gas/m68k/br-isaa.d: Likewise.
* testsuite/gas/m68k/br-isab.d: Likewise.
* testsuite/gas/m68k/br-isac.d: Likewise.
* config/te-psos.h: Delete.
* config/te-sun3.h: Delete.
* testsuite/gas/m68k-coff/gas.exp: Delete.
* testsuite/gas/m68k-coff/p2389.s: Delete.
* testsuite/gas/m68k-coff/p2389a.s: Delete.
* testsuite/gas/m68k-coff/p2430.s: Delete.
* testsuite/gas/m68k-coff/p2430a.s: Delete.
* testsuite/gas/m68k-coff/t1.s: Delete.
* testsuite/gas/m68k/p3041.d: Delete.
* testsuite/gas/m68k/p3041.s: Delete.
* testsuite/gas/m68k/p3041data.d: Delete.
* testsuite/gas/m68k/p3041data.s: Delete.
* testsuite/gas/m68k/p3041pcrel.d: Delete.
* testsuite/gas/m68k/p3041pcrel.s: Delete.
* testsuite/gas/m68k/t2.d: Delete.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove m68k-aout and m68k-coff support.
* configure.tgt: Likewise.
* emultempl/m68kelf.em: Likewise.
* ld.texinfo: Likewise.
* mri.c: Likewise.
* emulparams/delta68.sh: Delete.
* emulparams/hp300bsd.sh: Delete.
* emulparams/hp3hpux.sh: Delete.
* emulparams/m68k4knbsd.sh: Delete.
* emulparams/m68kaout.sh: Delete.
* emulparams/m68kaux.sh: Delete.
* emulparams/m68kcoff.sh: Delete.
* emulparams/m68klinux.sh: Delete.
* emulparams/m68knbsd.sh: Delete.
* emulparams/m68kpsos.sh: Delete.
* emulparams/sun3.sh: Delete.
* emultempl/m68kcoff.em: Delete.
* scripttempl/delta68.sc: Delete.
* scripttempl/m68kaux.sc: Delete.
* scripttempl/m68kcoff.sc: Delete.
* scripttempl/psos.sc: Delete.
* testsuite/ld-versados/t1-1.ro: Delete.
* testsuite/ld-versados/t1-2.ro: Delete.
* testsuite/ld-versados/t1.ld: Delete.
* testsuite/ld-versados/t1.ook: Delete.
* testsuite/ld-versados/t2-1.ro: Delete.
* testsuite/ld-versados/t2-2.ro: Delete.
* testsuite/ld-versados/t2-3.ro: Delete.
* testsuite/ld-versados/t2.ld: Delete.
* testsuite/ld-versados/t2.ook: Delete.
* testsuite/ld-versados/versados.exp: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:59:39 +0000 (15:29 +0930)]
Remove sh5 and sh64 support
include/
* dis-asm.h: Remove sh5 and sh64 support.
bfd/
* Makefile.am: Remove sh5 and sh64 support.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* cpu-sh.c: Likewise.
* elf32-sh-relocs.h: Likewise.
* elf32-sh.c: Likewise.
* targets.c: Likewise.
* elf32-sh64-com.c: Delete.
* elf32-sh64.c: Delete.
* elf32-sh64.h: Delete.
* elf64-sh64.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove sh5 and sh64 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Delete.
* sh64-opc.c: Delete.
* sh64-opc.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
bintuils/
* testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support.
gas/
* Makefile.am: Remove sh5 and sh64 support.
* config/tc-sh.c: Likewise.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/as.texinfo: Likewise.
* testsuite/gas/cfi/cfi.exp: Likewise.
* testsuite/gas/sh/basic.exp: Likewise.
* config/tc-sh64.c: Delete.
* config/tc-sh64.h: Delete.
* doc/c-sh64.texi: Delete.
* testsuite/gas/sh/sh64/abi-32.d: Delete.
* testsuite/gas/sh/sh64/abi-32.s: Delete.
* testsuite/gas/sh/sh64/abi-64.d: Delete.
* testsuite/gas/sh/sh64/abi-64.s: Delete.
* testsuite/gas/sh/sh64/basic-1.d: Delete.
* testsuite/gas/sh/sh64/basic-1.s: Delete.
* testsuite/gas/sh/sh64/case-1.d: Delete.
* testsuite/gas/sh/sh64/case-1.s: Delete.
* testsuite/gas/sh/sh64/case-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/crange1-1.d: Delete.
* testsuite/gas/sh/sh64/crange1-2.d: Delete.
* testsuite/gas/sh/sh64/crange1.s: Delete.
* testsuite/gas/sh/sh64/crange2-1.d: Delete.
* testsuite/gas/sh/sh64/crange2-2.d: Delete.
* testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/crange2.s: Delete.
* testsuite/gas/sh/sh64/crange3-1.d: Delete.
* testsuite/gas/sh/sh64/crange3.s: Delete.
* testsuite/gas/sh/sh64/crange4-1.d: Delete.
* testsuite/gas/sh/sh64/crange4.s: Delete.
* testsuite/gas/sh/sh64/crange5-1.d: Delete.
* testsuite/gas/sh/sh64/crange5.s: Delete.
* testsuite/gas/sh/sh64/creg-1.d: Delete.
* testsuite/gas/sh/sh64/creg-1.s: Delete.
* testsuite/gas/sh/sh64/creg-2.d: Delete.
* testsuite/gas/sh/sh64/creg-2.s: Delete.
* testsuite/gas/sh/sh64/datal-1.s: Delete.
* testsuite/gas/sh/sh64/datal-2.d: Delete.
* testsuite/gas/sh/sh64/datal-2.s: Delete.
* testsuite/gas/sh/sh64/datal-3.s: Delete.
* testsuite/gas/sh/sh64/datal32-1.d: Delete.
* testsuite/gas/sh/sh64/datal32-3.d: Delete.
* testsuite/gas/sh/sh64/datal64-1.d: Delete.
* testsuite/gas/sh/sh64/datal64-3.d: Delete.
* testsuite/gas/sh/sh64/eh-1.d: Delete.
* testsuite/gas/sh/sh64/eh-1.s: Delete.
* testsuite/gas/sh/sh64/endian-1.d: Delete.
* testsuite/gas/sh/sh64/endian-1.s: Delete.
* testsuite/gas/sh/sh64/endian-2.d: Delete.
* testsuite/gas/sh/sh64/endian-2.s: Delete.
* testsuite/gas/sh/sh64/err-1.s: Delete.
* testsuite/gas/sh/sh64/err-2.s: Delete.
* testsuite/gas/sh/sh64/err-3.s: Delete.
* testsuite/gas/sh/sh64/err-4.s: Delete.
* testsuite/gas/sh/sh64/err-abi-32.s: Delete.
* testsuite/gas/sh/sh64/err-abi-64.s: Delete.
* testsuite/gas/sh/sh64/err-dsp.s: Delete.
* testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete.
* testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete.
* testsuite/gas/sh/sh64/err-pt-1.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete.
* testsuite/gas/sh/sh64/err-ptb-1.s: Delete.
* testsuite/gas/sh/sh64/err-ptb-2.s: Delete.
* testsuite/gas/sh/sh64/err.exp: Delete.
* testsuite/gas/sh/sh64/immexpr1.s: Delete.
* testsuite/gas/sh/sh64/immexpr2.s: Delete.
* testsuite/gas/sh/sh64/immexpr32-1.d: Delete.
* testsuite/gas/sh/sh64/immexpr32-2.d: Delete.
* testsuite/gas/sh/sh64/immexpr64-1.d: Delete.
* testsuite/gas/sh/sh64/immexpr64-2.d: Delete.
* testsuite/gas/sh/sh64/lineno.d: Delete.
* testsuite/gas/sh/sh64/lineno.s: Delete.
* testsuite/gas/sh/sh64/localcom-1.d: Delete.
* testsuite/gas/sh/sh64/localcom-1.s: Delete.
* testsuite/gas/sh/sh64/mix-1.d: Delete.
* testsuite/gas/sh/sh64/mix-1.s: Delete.
* testsuite/gas/sh/sh64/mix-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/movi-1.s: Delete.
* testsuite/gas/sh/sh64/movi-2.s: Delete.
* testsuite/gas/sh/sh64/movi-3.d: Delete.
* testsuite/gas/sh/sh64/movi-3.s: Delete.
* testsuite/gas/sh/sh64/movi32-1.d: Delete.
* testsuite/gas/sh/sh64/movi32-2.d: Delete.
* testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/movi64-1.d: Delete.
* testsuite/gas/sh/sh64/movi64-2.d: Delete.
* testsuite/gas/sh/sh64/movi64-2.s: Delete.
* testsuite/gas/sh/sh64/movi64-3.d: Delete.
* testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/pt-1.d: Delete.
* testsuite/gas/sh/sh64/pt-1.s: Delete.
* testsuite/gas/sh/sh64/pt-2.s: Delete.
* testsuite/gas/sh/sh64/pt-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/pt32-1.d: Delete.
* testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/pt64-1.d: Delete.
* testsuite/gas/sh/sh64/pt64-32-1.d: Delete.
* testsuite/gas/sh/sh64/pt64-32-2.d: Delete.
* testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/ptc-1.s: Delete.
* testsuite/gas/sh/sh64/ptc32-1.d: Delete.
* testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-32-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptext-1.s: Delete.
* testsuite/gas/sh/sh64/ptext32-1.d: Delete.
* testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-32-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/rel-1.s: Delete.
* testsuite/gas/sh/sh64/rel-2.s: Delete.
* testsuite/gas/sh/sh64/rel-3.s: Delete.
* testsuite/gas/sh/sh64/rel-4.s: Delete.
* testsuite/gas/sh/sh64/rel-5.s: Delete.
* testsuite/gas/sh/sh64/rel32-1.d: Delete.
* testsuite/gas/sh/sh64/rel32-2.d: Delete.
* testsuite/gas/sh/sh64/rel32-3.d: Delete.
* testsuite/gas/sh/sh64/rel32-4.d: Delete.
* testsuite/gas/sh/sh64/rel32-5.d: Delete.
* testsuite/gas/sh/sh64/rel64-1.d: Delete.
* testsuite/gas/sh/sh64/rel64-2.d: Delete.
* testsuite/gas/sh/sh64/rel64-3.d: Delete.
* testsuite/gas/sh/sh64/rel64-4.d: Delete.
* testsuite/gas/sh/sh64/rel64-5.d: Delete.
* testsuite/gas/sh/sh64/relax-1.d: Delete.
* testsuite/gas/sh/sh64/relax-1.s: Delete.
* testsuite/gas/sh/sh64/relax-2.d: Delete.
* testsuite/gas/sh/sh64/relax-2.s: Delete.
* testsuite/gas/sh/sh64/relax-3.d: Delete.
* testsuite/gas/sh/sh64/relax-3.s: Delete.
* testsuite/gas/sh/sh64/sh64.exp: Delete.
* testsuite/gas/sh/sh64/shift-1.s: Delete.
* testsuite/gas/sh/sh64/shift-2.s: Delete.
* testsuite/gas/sh/sh64/shift-3.s: Delete.
* testsuite/gas/sh/sh64/shift32-1.d: Delete.
* testsuite/gas/sh/sh64/shift32-3.d: Delete.
* testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete.
* testsuite/gas/sh/sh64/shift64-1.d: Delete.
* testsuite/gas/sh/sh64/shift64-2.d: Delete.
* testsuite/gas/sh/sh64/shift64-3.d: Delete.
* testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete.
* testsuite/gas/sh/sh64/syntax-1.d: Delete.
* testsuite/gas/sh/sh64/syntax-1.s: Delete.
* testsuite/gas/sh/sh64/syntax-2.d: Delete.
* testsuite/gas/sh/sh64/syntax-2.s: Delete.
* testsuite/gas/sh/sh64/ua-1.s: Delete.
* testsuite/gas/sh/sh64/ua32-1.d: Delete.
* testsuite/gas/sh/sh64/ua64-1.d: Delete.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove sh5 and sh64 support.
* configure.tgt: Likewise.
* ldlang.c: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-gc/pr13683.d: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/ld-r-1.d: Likewise.
* testsuite/ld-sh/rd-sh.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-undefined/undefined.exp: Likewise.
* emulparams/shelf32.sh: Delete.
* emulparams/shelf32_linux.sh: Delete.
* emulparams/shelf32_nbsd.sh: Delete.
* emulparams/shelf64.sh: Delete.
* emulparams/shelf64_nbsd.sh: Delete.
* emulparams/shlelf32.sh: Delete.
* emulparams/shlelf32_linux.sh: Delete.
* emulparams/shlelf32_nbsd.sh: Delete.
* emulparams/shlelf64.sh: Delete.
* emulparams/shlelf64_nbsd.sh: Delete.
* emultempl/sh64elf.em: Delete.
* testsuite/ld-sh/sh64/abi32.sd: Delete.
* testsuite/ld-sh/sh64/abi32.xd: Delete.
* testsuite/ld-sh/sh64/abi64.sd: Delete.
* testsuite/ld-sh/sh64/abi64.xd: Delete.
* testsuite/ld-sh/sh64/abixx-noexp.sd: Delete.
* testsuite/ld-sh/sh64/cmpct1.sd: Delete.
* testsuite/ld-sh/sh64/cmpct1.xd: Delete.
* testsuite/ld-sh/sh64/crange-1.s: Delete.
* testsuite/ld-sh/sh64/crange-2a.s: Delete.
* testsuite/ld-sh/sh64/crange-2b.s: Delete.
* testsuite/ld-sh/sh64/crange-2c.s: Delete.
* testsuite/ld-sh/sh64/crange-2d.s: Delete.
* testsuite/ld-sh/sh64/crange-2e.s: Delete.
* testsuite/ld-sh/sh64/crange-2f.s: Delete.
* testsuite/ld-sh/sh64/crange-2g.s: Delete.
* testsuite/ld-sh/sh64/crange-2h.s: Delete.
* testsuite/ld-sh/sh64/crange-2i.s: Delete.
* testsuite/ld-sh/sh64/crange1.rd: Delete.
* testsuite/ld-sh/sh64/crange2.rd: Delete.
* testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete.
* testsuite/ld-sh/sh64/crange3-media.rd: Delete.
* testsuite/ld-sh/sh64/crange3.dd: Delete.
* testsuite/ld-sh/sh64/crange3.rd: Delete.
* testsuite/ld-sh/sh64/crangerel1.rd: Delete.
* testsuite/ld-sh/sh64/crangerel2.rd: Delete.
* testsuite/ld-sh/sh64/dlsection-1.s: Delete.
* testsuite/ld-sh/sh64/dlsection.sd: Delete.
* testsuite/ld-sh/sh64/endian.dbd: Delete.
* testsuite/ld-sh/sh64/endian.dld: Delete.
* testsuite/ld-sh/sh64/endian.ld: Delete.
* testsuite/ld-sh/sh64/endian.s: Delete.
* testsuite/ld-sh/sh64/endian.sbd: Delete.
* testsuite/ld-sh/sh64/endian.sld: Delete.
* testsuite/ld-sh/sh64/gotplt.d: Delete.
* testsuite/ld-sh/sh64/gotplt.map: Delete.
* testsuite/ld-sh/sh64/gotplt.s: Delete.
* testsuite/ld-sh/sh64/init-cmpct.d: Delete.
* testsuite/ld-sh/sh64/init-media.d: Delete.
* testsuite/ld-sh/sh64/init.s: Delete.
* testsuite/ld-sh/sh64/init64.d: Delete.
* testsuite/ld-sh/sh64/mix1-noexp.sd: Delete.
* testsuite/ld-sh/sh64/mix1.sd: Delete.
* testsuite/ld-sh/sh64/mix1.xd: Delete.
* testsuite/ld-sh/sh64/mix2-noexp.sd: Delete.
* testsuite/ld-sh/sh64/mix2.sd: Delete.
* testsuite/ld-sh/sh64/mix2.xd: Delete.
* testsuite/ld-sh/sh64/rd-sh64.exp: Delete.
* testsuite/ld-sh/sh64/rel-1.s: Delete.
* testsuite/ld-sh/sh64/rel-2.s: Delete.
* testsuite/ld-sh/sh64/rel32.xd: Delete.
* testsuite/ld-sh/sh64/rel64.xd: Delete.
* testsuite/ld-sh/sh64/relax.exp: Delete.
* testsuite/ld-sh/sh64/relax1.s: Delete.
* testsuite/ld-sh/sh64/relax2.s: Delete.
* testsuite/ld-sh/sh64/relax3.s: Delete.
* testsuite/ld-sh/sh64/relax4.s: Delete.
* testsuite/ld-sh/sh64/reldl-1.s: Delete.
* testsuite/ld-sh/sh64/reldl-2.s: Delete.
* testsuite/ld-sh/sh64/reldl32.rd: Delete.
* testsuite/ld-sh/sh64/reldl64.rd: Delete.
* testsuite/ld-sh/sh64/relfail.exp: Delete.
* testsuite/ld-sh/sh64/relfail.s: Delete.
* testsuite/ld-sh/sh64/sh64-1.s: Delete.
* testsuite/ld-sh/sh64/sh64-2.s: Delete.
* testsuite/ld-sh/sh64/sh64.exp: Delete.
* testsuite/ld-sh/sh64/shcmp-1.s: Delete.
* testsuite/ld-sh/sh64/shdl-1.s: Delete.
* testsuite/ld-sh/sh64/shdl-2.s: Delete.
* testsuite/ld-sh/sh64/shdl32.xd: Delete.
* testsuite/ld-sh/sh64/shdl64.sd: Delete.
* testsuite/ld-sh/sh64/shdl64.xd: Delete.
* testsuite/ld-sh/sh64/shmix-1.s: Delete.
* testsuite/ld-sh/sh64/shmix-2.s: Delete.
* testsuite/ld-sh/sh64/shmix-3.s: Delete.
* testsuite/ld-sh/sh64/stobin-0-dso.d: Delete.
* testsuite/ld-sh/sh64/stobin-1.d: Delete.
* testsuite/ld-sh/sh64/stobin.s: Delete.
* testsuite/ld-sh/sh64/stolib.s: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:57:45 +0000 (15:27 +0930)]
Remove sh-symbianelf support
bfd/
* Makefile.am: Remove sh-symbianelf support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* elf32-sh-symbian.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* config/tc-sh.c: Remove sh-symbianelf support.
* config/tc-sh.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/sh/reg-prefix.d: Likewise.
* testsuite/gas/sh/sh2a-pic.d: Likewise.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* Makefile.am: Remove sh-symbianelf support.
* configure.tgt: Likewise.
* emulparams/shlsymbian.sh: Delete.
* scripttempl/elf32sh-symbian.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:56:56 +0000 (15:26 +0930)]
Remove vax-bsd and vax-ultrix support
bfd/
* Makefile.am: Remove vax-bsd and vax-ultrix support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* vaxbsd.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove vax-bsd and vax-ultrix support.
* configure.tgt: Likewise.
* emulparams/vax.sh: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:56:05 +0000 (15:26 +0930)]
Remove w65 support
include/
* coff/internal.h: Remove w65 support.
* coff/w65.h: Delete.
bfd/
* Makefile.am: Remove w65 support.
* archures.c: Likewise.
* coffcode.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* coff-w65.c: Delete.
* cpu-w65.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove w65 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* w65-dis.c: Delete.
* w65-opc.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/objcopy.exp: Remove w65 support.
ld/
* Makefile.am: Remove w65 support.
* configure.tgt: Likewise.
* emulparams/w65.sh: Delete.
* scripttempl/w65.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:54:43 +0000 (15:24 +0930)]
Remove we32k support
include/
* coff/we32k.h: Delete.
bfd/
* Makefile.am: Remove we32k support.
* archures.c: Likewise.
* coffcode.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* coff-we32k.c: Delete.
* cpu-we32k.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* configure.ac: Remove we32k support.
* configure: Regenerate.
bintuils/
* testsuite/binutils-all/objdump.exp: Remove we32k support.
Alan Modra [Mon, 16 Apr 2018 05:53:38 +0000 (15:23 +0930)]
Remove m88k support
include/
* coff/internal.h: Remove m88k support.
* coff/m88k.h: Delete.
* opcode/m88k.h: Delete.
bfd/
* Makefile.am: Remove m88k support.
* aoutx.h: Likewise.
* archures.c: Likewise.
* coffcode.h: Likewise.
* coffswap.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* cpu-ns32k.c: Likewise.
* elf32-nds32.c: Likewise.
* mach-o.c: Likewise.
* netbsd-core.c: Likewise.
* reloc.c: Likewise.
* targets.c: Likewise.
* coff-m88k.c: Delete.
* cpu-m88k.c: Delete.
* elf32-m88k.c: Delete.
* hosts/m88kmach3.h: Delete.
* m88kmach3.c: Delete.
* m88kopenbsd.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove m88k support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* m88k-dis.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* MAINTAINERS (Mark Kettenis): Move to past maintainers.
* testsuite/binutils-all/objdump.exp: Remove m88k support.
gas/
* configure.ac: Remove m88k support.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* Makefile.am: Remove m88k support.
* configure.host: Likewise.
* configure.tgt: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* emulparams/m88kbcs.sh: Delete.
* scripttempl/m88kbcs.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:51:56 +0000 (15:21 +0930)]
Remove i370 support
include/
* elf/i370.h: Delete.
* opcode/i370.h: Delete.
bfd/
* Makefile.am: Remove i370 support.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* cpu-i370.c: Delete.
* elf32-i370.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove i370 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* i370-dis.c: Delete.
* i370-opc.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* readelf.c: Remove i370 support.
* testsuite/binutils-all/objdump.exp: Likewise.
gas/
* Makefile.am: Remove i370 support.
* app.c: Likewise.
* config/obj-elf.c: Likewise.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/as.texinfo: Likewise.
* testsuite/gas/all/gas.exp: Likewise.
* testsuite/gas/elf/warn-2.s: Likewise.
* testsuite/gas/lns/lns.exp: Likewise.
* config/tc-i370.c: Delete.
* config/tc-i370.h: Delete.
* doc/c-i370.texi: Delete.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove i370 support.
* configure.tgt: Likewise.
* testsuite/ld-elf/compressed1d.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr12975.d: Likewise.
* testsuite/ld-elf/pr13177.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elf/pr17615.d: Likewise.
* testsuite/ld-elf/pr21562a.d: Likewise.
* testsuite/ld-elf/pr21562b.d: Likewise.
* testsuite/ld-elf/pr21562c.d: Likewise.
* testsuite/ld-elf/pr21562d.d: Likewise.
* testsuite/ld-elf/pr21562i.d: Likewise.
* testsuite/ld-elf/pr21562j.d: Likewise.
* testsuite/ld-elf/pr21562k.d: Likewise.
* testsuite/ld-elf/pr21562l.d: Likewise.
* testsuite/ld-elf/pr21562m.d: Likewise.
* testsuite/ld-elf/pr21562n.d: Likewise.
* testsuite/ld-elf/pr22677.d: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
* emulparams/elf32i370.sh: Delete.
* scripttempl/elfi370.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:49:41 +0000 (15:19 +0930)]
Remove h8500 support
include/
* coff/h8500.h: Delete.
* coff/internal.h: Remove h8500 support.
bfd/
* Makefile.am: Remove h8500 support.
* archures.c: Likewise.
* coffcode.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* coff-h8500.c: Delete.
* cpu-h8500.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove h8500 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* h8500-dis.c: Delete.
* h8500-opc.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/objcopy.exp: Remove h8500 support.
* testsuite/lib/binutils-common.exp: Likewise.
gas/
* config/obj-coff.h: Remove h8500 support.
ld/
* Makefile.am: Remove h8500 support.
* configure.tgt: Likewise.
* emulparams/h8500.sh: Delete.
* emulparams/h8500b.sh: Delete.
* emulparams/h8500c.sh: Delete.
* emulparams/h8500m.sh: Delete.
* emulparams/h8500s.sh: Delete.
* scripttempl/h8500.sc: Delete.
* scripttempl/h8500b.sc: Delete.
* scripttempl/h8500c.sc: Delete.
* scripttempl/h8500m.sc: Delete.
* scripttempl/h8500s.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:47:57 +0000 (15:17 +0930)]
Remove h8300-coff support
include/
* coff/h8300.h: Delete.
bfd/
* Makefile.am: Remove h8300-coff support.
* coffcode.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* reloc16.c: Likewise.
* targets.c: Likewise.
* coff-h8300.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/objcopy.exp: Remove h8300-coff support.
gas/
* config/obj-coff.h: Remove h8300-coff support.
* config/tc-h8300.c: Likewise.
* config/tc-h8300.h: Likewise.
* testsuite/gas/h8300/h8300.exp: Likewise.
* testsuite/gas/h8300/branch-coff.s: Delete.
* testsuite/gas/h8300/branchh-coff.s: Delete.
* testsuite/gas/h8300/branchs-coff.s: Delete.
* testsuite/gas/h8300/ffxx1-coff.d: Delete.
* testsuite/gas/h8300/ffxx1-coff.s: Delete.
* testsuite/gas/h8300/h8300-coff.exp: Delete.
ld/
* Makefile.am: Remove h8300-coff support.
* configure.tgt: Likewise.
* testsuite/ld-h8300/h8300.exp: Likewise.
* emulparams/h8300.sh: Delete.
* emulparams/h8300h.sh: Delete.
* emulparams/h8300hn.sh: Delete.
* emulparams/h8300s.sh: Delete.
* emulparams/h8300sn.sh: Delete.
* emulparams/h8300sx.sh: Delete.
* emulparams/h8300sxn.sh: Delete.
* scripttempl/h8300.sc: Delete.
* scripttempl/h8300h.sc: Delete.
* scripttempl/h8300hn.sc: Delete.
* scripttempl/h8300s.sc: Delete.
* scripttempl/h8300sn.sc: Delete.
* scripttempl/h8300sx.sc: Delete.
* scripttempl/h8300sxn.sc: Delete.
* testsuite/ld-h8300/relax-3-coff.d: Delete.
* testsuite/ld-h8300/relax-4-coff.d: Delete.
* testsuite/ld-h8300/relax-5-coff.d: Delete.
* testsuite/ld-h8300/relax-6-coff.d: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:46:00 +0000 (15:16 +0930)]
Remove IEEE 695 object support
include/
* ieee.h: Delete.
bfd/
* Makefile.am: Remove IEEE 695 support.
* archures.c: Likewise.
* bfd.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* doc/bfd.texinfo: Likewise.
* doc/bfdint.texi: Likewise.
* doc/bfdsumm.texi: Likewise.
* section.c: Likewise.
* targets.c: Likewise.
* ieee.c: Delete.
* libieee.h: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* Makefile.am: Remove IEEE 695 support.
* budbg.h: Likewise.
* doc/binutils.texi: Likewise.
* makefile.vms: Likewise.
* objcopy.c: Likewise.
* objdump.c: Likewise.
* rddbg.c: Likewise.
* ieee.c: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
gas/
* app.c: Remove IEEE 695 support.
* symbols.c: Likewise.
ld/
* ld.texinfo: Remove IEEE 695 support.
* mri.c: Likewise.
Alan Modra [Mon, 16 Apr 2018 05:44:19 +0000 (15:14 +0930)]
Remove tandem support
bfd/
* config.bfd: Remove tandem support.
ld/
* Makefile.am: Remove tandem support.
* configure.tgt: Likewise.
* emulparams/st2000.sh: Delete.
* scripttempl/st2000.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:43:07 +0000 (15:13 +0930)]
Remove sony newsos3 support
include/
* aout/host.h: Remove newsos3 support.
bfd/
* Makefile.am: Remove newsos3 support.
* aoutx.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* newsos3.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/copy-2.d: Remove newsos3 support.
* testsuite/binutils-all/nm.exp: Likewise.
ld/
* Makefile.am: Remove newsos3 support.
* configure.tgt: Likewise.
* emulparams/news.sh: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:41:22 +0000 (15:11 +0930)]
Remove netware support
include/
* nlm/ChangeLog-9315: Delete.
* nlm/alpha-ext.h: Delete.
* nlm/common.h: Delete.
* nlm/external.h: Delete.
* nlm/i386-ext.h: Delete.
* nlm/internal.h: Delete.
* nlm/ppc-ext.h: Delete.
* nlm/sparc32-ext.h: Delete.
bfd/
* Makefile.am: Remove netware support.
* bfd-in.h: Likewise.
* bfd.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* doc/bfdint.texi: Likewise.
* ecoff.c: Likewise.
* targets.c: Likewise.
* libnlm.h: Delete.
* nlm-target.h: Delete.
* nlm.c: Delete.
* nlm32-alpha.c: Delete.
* nlm32-i386.c: Delete.
* nlm32-ppc.c: Delete.
* nlm32-sparc.c: Delete.
* nlm32.c: Delete.
* nlm64.c: Delete.
* nlmcode.h: Delete.
* nlmswap.h: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* .gitignore: Remove netware support.
* Makefile.am: Likewise.
* configure.ac: Likewise.
* doc/Makefile.am: Likewise.
* doc/binutils.texi: Likewise.
* testsuite/binutils-all/nm.exp: Likewise.
* nlmconv.c: Delete.
* nlmconv.h: Delete.
* nlmheader.y: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
gas/
* Makefile.am: Remove netware support.
* config/tc-i386.c: Likewise.
* configure.tgt: Likewise.
* config/te-netware.h: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
gprof/
* corefile.c: Remove netware support.
ld/
* Makefile.am: Remove netware support.
* configure.tgt: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
* emulparams/i386nw.sh: Delete.
* emulparams/ppcnw.sh: Delete.
* scripttempl/nw.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Mon, 16 Apr 2018 05:38:40 +0000 (15:08 +0930)]
Remove tahoe support
include/
* opcode/tahoe.h: Delete.
bfd/
* archures.c: Remove tahoe support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* hosts/tahoe.h: Delete.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
opcodes/
* configure.ac: Remove tahoe support.
* configure: Regenerate.
binutils/
* testsuite/binutils-all/objdump.exp: Remove tahoe support.
gprof/
* Makefile.am: Remove tahoe support.
* corefile.c: Likewise.
* tahoe.c: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
GDB Administrator [Mon, 16 Apr 2018 00:00:29 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Sun, 15 Apr 2018 16:52:27 +0000 (12:52 -0400)] 
Add x86-tdep.o to i386/amd64 target build
We get this error when doing a build with a single amd64 target (the
default when doing just ./configure on x86-64 GNU/Linux):
/home/simark/src/binutils-gdb/gdb/i386-tdep.c:4431: error: undefined reference to 'x86_in_indirect_branch_thunk(unsigned long, char const**, int, int)'
/home/simark/src/binutils-gdb/gdb/amd64-tdep.c:3045: error: undefined reference to 'x86_in_indirect_branch_thunk(unsigned long, char const**, int, int)'
The problem is that commit
1d509aa625f8 ("infrun: step through indirect branch thunks")
missed adding x86-tdep.o to the list of object file included in an amd64
or i386 build. The problem is not seen with --enable-targets=all
because that file is included in ALL_TARGET_OBS.
Built-tested using:
* --host=x86_64-pc-linux-gnu --target=x86_64-pc-linux-gnu
* --host=armv7-rpi2-linux-gnueabihf --target=x86_64-pc-linux-gnu
gdb/ChangeLog:
* configure.tgt (x86_tobjs): New variable.
(amd64_tobjs, i386_tobjs): Use it.
H.J. Lu [Sun, 15 Apr 2018 15:38:23 +0000 (08:38 -0700)]
x86: Allow 32-bit registers for tpause and umwait
Since only the first 32 bits of input operand are used for tpause and
umwait, the REX.W bit is skipped. Both 32-bit registers and 64-bit
registers are allowed.
gas/
* testsuite/gas/i386/x86-64-waitpkg.s: Add 32-bit registers
tests for tpause and umwait.
* testsuite/gas/i386/x86-64-waitpkg-intel.d: Updated.
* testsuite/gas/i386/x86-64-waitpkg.d: Likewise.
opcodes/
* i386-dis.c (prefix_table): Replace Em with Edq on tpause and
umwait.
* i386-opc.tbl: Allow 32-bit registers for tpause and umwait in
64-bit mode.
* i386-tbl.h: Regenerated.
GDB Administrator [Sun, 15 Apr 2018 00:00:48 +0000 (00:00 +0000)]
Automatic date update in version.in
Cary Coutant [Sat, 14 Apr 2018 22:58:07 +0000 (15:58 -0700)] 
Fix bug where --icf=safe triggers segfault when linking ARM.
When checking a R_ARM_TARGET[12] relocation, we need a valid target
pointer, but the garbage collection code was passing a NULL instead.
gold/
PR gold/23046
* gc.h (gc_process_relocs): Pass target to
scan.global_reloc_may_be_function_pointer.
Alan Modra [Sat, 14 Apr 2018 06:53:56 +0000 (16:23 +0930)]
powerpc common-page-size
max-page-size only matters for demand paged executables or shared
libraries, and the ideal size is the largest value used by your
operating system. Values larger than necessary just waste file space
and memory. common-page-size also affects file and memory size,
trading a possible small increase in file size for a decrease in
memory size when the operating system is using a common-page-size
page. With a powerpc max-page-size of 64k and common-page-size of 4k
many executables will use no more memory pages when the system page
size is 4k than an executable linked with -z max-page-size=0x1000,
yet will still run on a system using 64k pages. However, when running
on a system using 64k pages relro protection will not be completely
effective.
Due to the relro problem, powerpc binutils has been using a default
common-page-size of 64k since 2014-12-18 (git commit
04c6a44c7),
leading to complaints about increased file and memory sizes. People
not using relro do have a valid reason to complain..
So this patch introduces an extra back-end value to use as the default
for common-page-size when generating relro executables, and enables
the support for powerpc. Non relro executables will now be generated
with a default common-page-size of 4k.
bfd/
* elf-bfd.h (struct elf_backend_data): Add relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Provide default and
sanity test.
(elfNN_bed): Init relropagesize.
* bfd.c (bfd_emul_get_commonpagesize): Add boolean param to
select relropagesize.
* elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
(ELF_MINPAGESIZE): Don't define.
* elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
* bfd-in2.h: Regenerate.
ld/
* ldmain.c (main): Move config.maxpagesize and
config.commonpagesize initialization to..
* ldemul.c (after_parse_default): ..here.
* testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size.
* testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
Alan Modra [Thu, 12 Apr 2018 10:40:36 +0000 (20:10 +0930)]
powerpc max-page-size vs __QNXTARGET__
The default max-page-size on ppc32 has been 64k since 1995-02-15 (git
commit
bcbe2c71). There was a change committed 2003-07-12 to chose a
4k page if __QNXTARGET__ is defined, but that particular commit was
from an earlier posted patch
https://sourceware.org/ml/binutils/2003-07/msg00211.html that only
made the change effective for arm, rather than the later one
https://sourceware.org/ml/binutils/2003-07/msg00220.html that also
changed powerpc and sh..
Since the __QNXTARGET__ #ifdef in elf32-ppc.c is ineffective unless
the user defines it in his or her CFLAGS, I'm removing that code.
* elf32-ppc.c (ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Don't depend
on __QNXTARGET__ define.
Alan Modra [Sat, 14 Apr 2018 01:21:23 +0000 (10:51 +0930)]
powerpc-lynxos and powerpc-windiss fixes
Enabling shared lib tests showed the powerpc-lynxos target is broken,
and has been for a long time. The breakage happened in a 2005-05-07
patch of mine, git commit
3b36f7e62, I think. There have been no bug
reports I recall so it seems the target is dead. powerpc-windiss is
similarly broken.
This patch fixes the breakage, and puts the targets on the obsolete
list.
bfd/
* config.bfd: Add powerpc-*-lynxos* and powerpc-*-windiss*
to obsolete list.
ld/
* emulparams/elf32ppcwindiss.sh: Rewrite to use elf32ppc.sh.
* emulparams/ppclynx.sh: Likewise.
Alan Modra [Sat, 14 Apr 2018 01:20:16 +0000 (10:50 +0930)]
Reinstate readelf decoding of i860 and i960 machine names
Decoding of EM_* ought to continue.
* readelf.c (get_machine_name): Revert 2018-04-11 change.
GDB Administrator [Sat, 14 Apr 2018 00:00:33 +0000 (00:00 +0000)]
Automatic date update in version.in
Andreas Arnez [Fri, 13 Apr 2018 17:26:05 +0000 (19:26 +0200)]
Show line numbers in output for "info var/func/type"
The GDB commands "info variables", "info functions", and "info types" show
the appropriate list of definitions matching the given pattern. They also
group them by source files. But no line numbers within these source files
are shown.
The line number information is particularly useful to the user when a
simple "grep" doesn't readily point to a definition. This is often the
case when the definition involves a macro, occurs within a namespace, or
when the identifier appears very frequently in the source file.
This patch enriches the printout of these commands by the line numbers and
adjusts affected test cases to the changed output where necessary. The
new output looks like this:
(gdb) i variables
All defined variables:
File foo.c:
3: const char * const foo;
1: int x;
The line number is followed by a colon and a tab character, which is then
followed by the symbol definition. If no line number is available, the
tab is printed out anyhow, so definitions line up.
gdb/ChangeLog:
* symtab.c (print_symbol_info): Precede the symbol definition by
the line number when available.
* NEWS: Advertise this enhancement.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Mention the fact that "info
variables/functions/types" show source files and line numbers.
gdb/testsuite/ChangeLog:
* gdb.ada/info_types.exp: Adjust expected output to the line
numbers now printed by "info var/func/type".
* gdb.base/completion.exp: Likewise.
* gdb.base/included.exp: Likewise.
* gdb.cp/cp-relocate.exp: Likewise.
* gdb.cp/cplusfuncs.exp: Likewise.
* gdb.cp/namespace.exp: Likewise.
* gdb.dwarf2/dw2-case-insensitive.exp: Likewise.
Markus Metzger [Fri, 2 Feb 2018 11:29:48 +0000 (12:29 +0100)] 
btrace: set/show record btrace cpu
Add new set/show commands to set the processor that is used for enabling
errata workarounds when decoding branch trace.
The general format is "<vendor>:<identifier>" but we also allow two
special values "auto" and "none".
The default is "auto", which is the current behaviour of having GDB
determine the processor on which the trace was recorded.
If that cpu is not known to the trace decoder, e.g. when using an old
decoder on a new system, decode may fail with "unknown cpu". In most
cases it should suffice to 'downgrade' decode to assume an older cpu.
Unfortunately, we can't do this automatically.
The other special value, "none", disables errata workarounds.
gdb/
* NEWS (New options): announce set/show record btrace cpu.
* btrace.c: Include record-btrace.h.
(btrace_compute_ftrace_pt): Skip enabling errata workarounds if
the vendor is unknown.
(btrace_compute_ftrace_1): Add cpu parameter. Update callers.
Maybe overwrite the btrace configuration's cpu.
(btrace_compute_ftrace): Add cpu parameter. Update callers.
(btrace_fetch): Add cpu parameter. Update callers.
(btrace_maint_update_pt_packets): Call record_btrace_get_cpu.
Maybe overwrite the btrace configuration's cpu. Skip enabling
errata workarounds if the vendor is unknown.
* python/py-record-btrace.c: Include record-btrace.h.
(recpy_bt_begin, recpy_bt_end, recpy_bt_instruction_history)
(recpy_bt_function_call_history): Call record_btrace_get_cpu.
* record-btrace.c (record_btrace_cpu_state_kind): New.
(record_btrace_cpu): New.
(set_record_btrace_cpu_cmdlist): New.
(record_btrace_get_cpu): New.
(require_btrace_thread, record_btrace_info)
(record_btrace_resume_thread): Call record_btrace_get_cpu.
(cmd_set_record_btrace_cpu_none): New.
(cmd_set_record_btrace_cpu_auto): New.
(cmd_set_record_btrace_cpu): New.
(cmd_show_record_btrace_cpu): New.
(_initialize_record_btrace): Initialize set/show record btrace cpu
commands.
* record-btrace.h (record_btrace_get_cpu): New.
testsuite/
* gdb.btrace/cpu.exp: New.
doc/
* gdb.texinfo: Document set/show record btrace cpu.
Markus Metzger [Mon, 5 Mar 2018 16:44:57 +0000 (17:44 +0100)]
record: fix typo in "set record" output
Alan Hayward pointed out a typo in the output of "set record btrace" that
I took from "set record". Fix the original.
gdb/
* record.c (set_record_command): Fix typo in message.
Markus Metzger [Thu, 1 Feb 2018 13:31:18 +0000 (14:31 +0100)]
btrace: fix output of "set record btrace"
Instead of giving a message that "set record btrace" needs a sub-command,
GDB crashed. Fix it. A regression test comes with the next patch.
gdb/
* record-btrace.c (cmd_set_record_btrace): Print sub-commands.
Markus Metzger [Wed, 14 Feb 2018 13:30:57 +0000 (14:30 +0100)]
infrun: step through indirect branch thunks
With version 7.3 GCC supports new options
-mindirect-branch=<choice>
-mfunction-return=<choice>
The choices are:
keep behaves as before
thunk jumps through a thunk
thunk-external jumps through an external thunk
thunk-inline jumps through an inlined thunk
For thunk and thunk-external, GDB would, on a call to the thunk, step into
the thunk and then resume to its caller assuming that this is an
undebuggable function. On a return thunk, GDB would stop inside the
thunk.
Make GDB step through such thunks instead.
Before:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
30 }
After:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
inc (x=41) at gdb.base/step-indirect-call-thunk.c:23
23 return x + 1;
This is independent of the step-mode. In order to step into the thunk,
you would need to use stepi.
When stepping over an indirect call thunk, GDB would first step through
the thunk, then recognize that it stepped into a sub-routine and resume to
the caller (of the thunk). Not sure whether this is worth optimizing.
Thunk detection is implemented via gdbarch. I implemented the methods for
IA. Other architectures may run into unexpected fails.
The tests assume a fixed number of instruction steps to reach a thunk.
This depends on the compiler as well as the architecture. They may need
adjustments when we add support for more architectures. Or we can simply
drop those tests that cover being able to step into thunks using
instruction stepping.
When using an older GCC, the tests will fail to build and will be reported
as untested:
Running .../gdb.base/step-indirect-call-thunk.exp ...
gdb compile failed, \
gcc: error: unrecognized command line option '-mindirect-branch=thunk'
gcc: error: unrecognized command line option '-mfunction-return=thunk'
=== gdb Summary ===
# of untested testcases 1
gdb/
* infrun.c (process_event_stop_test): Call
gdbarch_in_indirect_branch_thunk.
* gdbarch.sh (in_indirect_branch_thunk): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* x86-tdep.h: New.
* x86-tdep.c: New.
* Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o.
(HFILES_NO_SRCDIR): Add x86-tdep.h.
(ALLDEPFILES): Add x86-tdep.c.
* arch-utils.h (default_in_indirect_branch_thunk): New.
* arch-utils.c (default_in_indirect_branch_thunk): New.
* i386-tdep: Include x86-tdep.h.
(i386_in_indirect_branch_thunk): New.
(i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch
function.
* amd64-tdep: Include x86-tdep.h.
(amd64_in_indirect_branch_thunk): New.
(amd64_init_abi): Set in_indirect_branch_thunk gdbarch function.
testsuite/
* gdb.base/step-indirect-call-thunk.exp: New.
* gdb.base/step-indirect-call-thunk.c: New.
* gdb.reverse/step-indirect-call-thunk.exp: New.
* gdb.reverse/step-indirect-call-thunk.c: New.
GDB Administrator [Fri, 13 Apr 2018 00:00:33 +0000 (00:00 +0000)]
Automatic date update in version.in
Jan Kratochvil [Thu, 12 Apr 2018 20:31:39 +0000 (22:31 +0200)] 
Fix -D_GLIBCXX_DEBUG gdb-add-index regression
Fedora Rawhide started to use -D_GLIBCXX_DEBUG which made gdb-add-index
failing:
gdb: Out-of-bounds vector access while running gdb-add-index
https://bugzilla.redhat.com/show_bug.cgi?id=
1540559
/usr/include/c++/7/debug/safe_iterator.h:270:
Error: attempt to dereference a past-the-end iterator.
Objects involved in the operation:
iterator "this" @ 0x0x7fffffffcb90 {
type = __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<unsigned char*, std::__cxx1998::vector<unsigned char, gdb::default_init_allocator<unsigned char, std::allocator<unsigned char> > > >, std::__debug::vector<unsigned char, gdb::default_init_allocator<unsigned char, std::allocator<unsigned char> > > > (mutable iterator);
state = past-the-end;
references sequence with type 'std::__debug::vector<unsigned char, gdb::default_init_allocator<unsigned char, std::allocator<unsigned char> > >' @ 0x0x7fffffffcc50
}
/usr/include/c++/7/debug/vector:417:
Error: attempt to subscript container with out-of-bounds index 556, but
container only holds 556 elements.
Objects involved in the operation:
sequence "this" @ 0x0x2e87af8 {
type = std::__debug::vector<partial_symbol*, std::allocator<partial_symbol*> >;
}
The two -D_GLIBCXX_DEBUG regressions were made by:
commit
bc8f2430e08cc2a520db49a42686e0529be4a3bc
Author: Jan Kratochvil <jan.kratochvil@redhat.com>
Date: Mon Jun 12 16:29:53 2017 +0100
Code cleanup: C++ify .gdb_index producer
commit
af5bf4ada48ff65b6658be1fab8f9c8f8ab5f319
Author: Simon Marchi <simon.marchi@ericsson.com>
Date: Sat Oct 14 08:06:29 2017 -0400
Replace psymbol_allocation_list with std::vector
gdb/ChangeLog
2018-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/23053
* dwarf-index-write.c (data_buf::grow) (write_one_signatured_type)
(recursively_write_psymbols) (debug_names::recursively_write_psymbols)
(debug_names::write_one_signatured_type): Fix -D_GLIBCXX_DEBUG
regression.
Tom Tromey [Thu, 29 Mar 2018 18:08:32 +0000 (12:08 -0600)]
Remove old univariant code from rust-lang.c
Since moving Rust enum handling into dwarf2read.c, some old code for
handling univariant enums in rust-lang.c has been obsolete. This
patch removes this code.
Tested on x86-64 Fedora 26, using rustc 1.23 (1.24 emits incorrect
DWARF for enums and so can't be used for this test).
2018-04-12 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_print_struct_def): Remove univariant code.
(rust_evaluate_subexp): Likewise.
Pedro Alves [Thu, 12 Apr 2018 16:47:59 +0000 (17:47 +0100)]
Fix Solaris build
This commit fixes a bit of rot in procfs.c caused by recent changes.
Specifically, the target_ops::to_detach change to pass down 'inferior
*' missed updating a forward declation, and the change to use
scoped_fd in more places missed removing one do_cleanups call.
src/gdb/procfs.c: In function ‘target_ops* procfs_target()’:
src/gdb/procfs.c:167:16: error: invalid conversion from ‘void (*)(target_ops*, const char*, int)’ to ‘void (*)(target_ops*, inferior*, int)’ [-fpermissive]
t->to_detach = procfs_detach;
^
src/gdb/procfs.c: In function ‘ssd* proc_get_LDT_entry(procinfo*, int)’:
src/gdb/procfs.c:1624:17: error: ‘old_chain’ was not declared in this scope
do_cleanups (old_chain);
^
src/gdb/procfs.c: At global scope:
src/gdb/procfs.c:90:13: error: ‘void procfs_detach(target_ops*, const char*, int)’ declared ‘static’ but never defined [-Werror=unused-function]
static void procfs_detach (struct target_ops *, const char *, int);
^
src/gdb/procfs.c:1923:1: error: ‘void procfs_detach(target_ops*, inferior*, int)’ defined but not used [-Werror=unused-function]
procfs_detach (struct target_ops *ops, inferior *inf, int from_tty)
^
gdb/ChangeLog:
2018-04-12 Pedro Alves <palves@redhat.com>
* procfs.c (procfs_detach): Make forward declaration's prototype
match definition's protototype.
(proc_get_LDT_entry): Remove stale do_cleanups call.
Pedro Alves [Thu, 12 Apr 2018 16:36:01 +0000 (17:36 +0100)]
Eliminate target_has_exited
Nothing uses this.
gdb/ChangeLog:
2018-04-12 Pedro Alves <palves@redhat.com>
* target.h (target_ops::to_has_exited): Delete.
(target_has_exited): Delete.
* target-delegates.c: Regenerate.
Nick Clifton [Thu, 12 Apr 2018 14:41:07 +0000 (15:41 +0100)]
Fix the loading of the dynamic string table in a file without sections.
PR 23050
* readelf.c (process_dynamic_section): Correct dynamic string
table size calculation.
John Darrington [Thu, 12 Apr 2018 14:07:02 +0000 (15:07 +0100)] 
Stop the assembler from overwriting its output file.
* as.c (main): Fail if the output is the same as one of the input
files.
* testsuite/gas/all/gas.exp: Test the new feature.
Nick Clifton [Thu, 12 Apr 2018 11:01:50 +0000 (12:01 +0100)]
Updated Spanish and Russian translations for the gas sub-directory
GDB Administrator [Thu, 12 Apr 2018 00:00:29 +0000 (00:00 +0000)]
Automatic date update in version.in
Igor Tsimbalist [Mon, 9 Apr 2018 10:58:50 +0000 (12:58 +0200)]
Enable Intel WAITPKG instructions.
Intel has disclosed a set of new instructions for Tremont processor.
The spec is
https://software.intel.com/en-us/intel-architecture-instruction-set-extensions-programming-reference
This patch enables Intel WAITPKG instructions.
gas/
* config/tc-i386.c (cpu_arch): Add WAITPKG.
(cpu_noarch): Likewise.
* doc/c-i386.texi: Document WAITPKG.
* i386/i386.exp: Run WAITPKG tests.
* testsuite/gas/i386/waitpkg-intel.d: New test.
* testsuite/gas/i386/waitpkg.d: Likewise.
* testsuite/gas/i386/waitpkg.s: Likewise.
* testsuite/gas/i386/x86-64-waitpkg-intel.d: Likewise.
* testsuite/gas/i386/x86-64-waitpkg.d: Likewise.
* testsuite/gas/i386/x86-64-waitpkg.s: Likewise.
opcodes/
* i386-dis.c (enum): Add PREFIX_MOD_0_0FAE_REG_6,
PREFIX_MOD_1_0FAE_REG_6.
(va_mode): New.
(OP_E_register): Use va_mode.
* i386-dis-evex.h (prefix_table):
New instructions (see prefixes above).
* i386-gen.c (cpu_flag_init): Add WAITPKG.
(cpu_flags): Likewise.
* i386-opc.h (enum): Likewise.
(i386_cpu_flags): Likewise.
* i386-opc.tbl: Add umonitor, umwait, tpause.
* i386-init.h: Regenerate.
* i386-tbl.h: Likewise.
Simon Marchi [Wed, 11 Apr 2018 18:55:39 +0000 (14:55 -0400)]
Add test for following fork on position-independent executables
Commit
b2e586e ("Defer breakpoint reset when cloning progspace for fork
child")
fixed following fork childs when the executable is position-independent.
This patch adds a little test for it.
gdb/testsuite/ChangeLog:
* gdb.base/pie-fork.c: New file.
* gdb.base/pie-fork.exp: New file.
Tom Tromey [Thu, 29 Mar 2018 18:08:32 +0000 (12:08 -0600)]
Add Rust test case for ".." struct initializer
Building with --coverage pointed out that there was no Rust test for
initializing a structure using the ".." initializer. This patch adds
such a test.
Regression tested on x86-64 Fedora 26.
2018-04-11 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Add test for ".." struct initializer.
Alan Modra [Wed, 11 Apr 2018 09:16:05 +0000 (18:46 +0930)]
Remove i860, i960, bout and aout-adobe targets
Plus remove a few leftovers from the 29k support.
include/
* aout/adobe.h: Delete.
* aout/reloc.h: Delete.
* coff/i860.h: Delete.
* coff/i960.h: Delete.
* elf/i860.h: Delete.
* elf/i960.h: Delete.
* opcode/i860.h: Delete.
* opcode/i960.h: Delete.
* aout/aout64.h (enum reloc_type): Trim off 29k and other unused values.
* aout/ar.h (ARMAGB): Remove.
* coff/internal.h (struct internal_aouthdr, struct internal_scnhdr,
union internal_auxent): Remove i960 support.
bfd/
* aout-adobe.c: Delete.
* bout.c: Delete.
* coff-i860.c: Delete.
* coff-i960.c: Delete.
* cpu-i860.c: Delete.
* cpu-i960.c: Delete.
* elf32-i860.c: Delete.
* elf32-i960.c: Delete.
* hosts/i860mach3.h: Delete.
* Makefile.am: Remove i860, i960, bout, and adobe support.
* archures.c: Remove i860 and i960 support.
* coffcode.h: Likewise.
* reloc.c: Likewise.
* aoutx.h: Comment updates.
* archive.c: Remove BOUT and i960 support.
* bfd.c: Remove BOUT support.
* coffswap.h: Remove i960 support.
* config.bfd: Remove i860, i960 and adobe targets.
* configure.ac: Remove adode, bout, i860, i960, icoff targets.
* targets.c: Likewise.
* ieee.c: Remove i960 support.
* mach-o.c: Remove i860 support.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* opcodes/i860-dis.c: Delete.
* opcodes/i960-dis.c: Delete.
* Makefile.am: Remove i860 and i960 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* ieee.c: Remove i960 support.
* od-macho.c: Remove i860 support.
* readelf.c: Remove i860 and i960 support.
* testsuite/binutils-all/objcopy.exp: Likewise.
* testsuite/binutils-all/objdump.exp: Likewise.
* testsuite/lib/binutils-common.exp: Likewise.
gas/
* config/aout_gnu.h: Delete.
* config/tc-i860.c: Delete.
* config/tc-i860.h: Delete.
* config/tc-i960.c: Delete.
* config/tc-i960.h: Delete.
* doc/c-i860.texi: Delete.
* doc/c-i960.texi: Delete.
* testsuite/gas/i860/README.i860: Delete.
* testsuite/gas/i860/bitwise.d: Delete.
* testsuite/gas/i860/bitwise.s: Delete.
* testsuite/gas/i860/branch.d: Delete.
* testsuite/gas/i860/branch.s: Delete.
* testsuite/gas/i860/bte.d: Delete.
* testsuite/gas/i860/bte.s: Delete.
* testsuite/gas/i860/dir-align01.d: Delete.
* testsuite/gas/i860/dir-align01.s: Delete.
* testsuite/gas/i860/dir-intel01.d: Delete.
* testsuite/gas/i860/dir-intel01.s: Delete.
* testsuite/gas/i860/dir-intel02.d: Delete.
* testsuite/gas/i860/dir-intel02.s: Delete.
* testsuite/gas/i860/dir-intel03-err.l: Delete.
* testsuite/gas/i860/dir-intel03-err.s: Delete.
* testsuite/gas/i860/dual01.d: Delete.
* testsuite/gas/i860/dual01.s: Delete.
* testsuite/gas/i860/dual02-err.l: Delete.
* testsuite/gas/i860/dual02-err.s: Delete.
* testsuite/gas/i860/dual03.d: Delete.
* testsuite/gas/i860/dual03.s: Delete.
* testsuite/gas/i860/fldst01.d: Delete.
* testsuite/gas/i860/fldst01.s: Delete.
* testsuite/gas/i860/fldst02.d: Delete.
* testsuite/gas/i860/fldst02.s: Delete.
* testsuite/gas/i860/fldst03.d: Delete.
* testsuite/gas/i860/fldst03.s: Delete.
* testsuite/gas/i860/fldst04.d: Delete.
* testsuite/gas/i860/fldst04.s: Delete.
* testsuite/gas/i860/fldst05.d: Delete.
* testsuite/gas/i860/fldst05.s: Delete.
* testsuite/gas/i860/fldst06.d: Delete.
* testsuite/gas/i860/fldst06.s: Delete.
* testsuite/gas/i860/fldst07.d: Delete.
* testsuite/gas/i860/fldst07.s: Delete.
* testsuite/gas/i860/fldst08.d: Delete.
* testsuite/gas/i860/fldst08.s: Delete.
* testsuite/gas/i860/float01.d: Delete.
* testsuite/gas/i860/float01.s: Delete.
* testsuite/gas/i860/float02.d: Delete.
* testsuite/gas/i860/float02.s: Delete.
* testsuite/gas/i860/float03.d: Delete.
* testsuite/gas/i860/float03.s: Delete.
* testsuite/gas/i860/float04.d: Delete.
* testsuite/gas/i860/float04.s: Delete.
* testsuite/gas/i860/form.d: Delete.
* testsuite/gas/i860/form.s: Delete.
* testsuite/gas/i860/i860.exp: Delete.
* testsuite/gas/i860/iarith.d: Delete.
* testsuite/gas/i860/iarith.s: Delete.
* testsuite/gas/i860/ldst01.d: Delete.
* testsuite/gas/i860/ldst01.s: Delete.
* testsuite/gas/i860/ldst02.d: Delete.
* testsuite/gas/i860/ldst02.s: Delete.
* testsuite/gas/i860/ldst03.d: Delete.
* testsuite/gas/i860/ldst03.s: Delete.
* testsuite/gas/i860/ldst04.d: Delete.
* testsuite/gas/i860/ldst04.s: Delete.
* testsuite/gas/i860/ldst05.d: Delete.
* testsuite/gas/i860/ldst05.s: Delete.
* testsuite/gas/i860/ldst06.d: Delete.
* testsuite/gas/i860/ldst06.s: Delete.
* testsuite/gas/i860/pfam.d: Delete.
* testsuite/gas/i860/pfam.s: Delete.
* testsuite/gas/i860/pfmam.d: Delete.
* testsuite/gas/i860/pfmam.s: Delete.
* testsuite/gas/i860/pfmsm.d: Delete.
* testsuite/gas/i860/pfmsm.s: Delete.
* testsuite/gas/i860/pfsm.d: Delete.
* testsuite/gas/i860/pfsm.s: Delete.
* testsuite/gas/i860/pseudo-ops01.d: Delete.
* testsuite/gas/i860/pseudo-ops01.s: Delete.
* testsuite/gas/i860/regress01.d: Delete.
* testsuite/gas/i860/regress01.s: Delete.
* testsuite/gas/i860/shift.d: Delete.
* testsuite/gas/i860/shift.s: Delete.
* testsuite/gas/i860/simd.d: Delete.
* testsuite/gas/i860/simd.s: Delete.
* testsuite/gas/i860/system.d: Delete.
* testsuite/gas/i860/system.s: Delete.
* testsuite/gas/i860/xp.d: Delete.
* testsuite/gas/i860/xp.s: Delete.
* Makefile.am: Remove i860 and i960 support.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/all.texi: Likewise.
* testsuite/gas/all/gas.exp
* config/obj-coff.h: Remove i960 support.
* doc/internals.texi: Likewise.
* expr.c: Likewise.
* read.c: Likewise.
* write.c: Likewise.
* write.h: Likewise.
* testsuite/gas/lns/lns.exp: Likewise.
* testsuite/gas/symver/symver.exp: Likewise.
* config/tc-m68k.c: Remove BOUT support.
* config/tc-score.c: Likewise.
* config/tc-score7.c: Likewise.
* config/tc-sparc.c: Likewise.
* symbols.c: Likewise.
* doc/h8.texi: Likewise.
* configure.ac: Remove BOUT and i860 support.
* doc/as.texinfo: Remove BOUT, i860 and i960 support
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* emulparams/coff_i860.sh: Delete.
* emulparams/elf32_i860.sh: Delete.
* emulparams/elf32_i960.sh: Delete.
* emulparams/gld960.sh: Delete.
* emulparams/gld960coff.sh: Delete.
* emulparams/lnk960.sh: Delete.
* emultempl/gld960.em: Delete.
* emultempl/gld960c.em: Delete.
* emultempl/lnk960.em: Delete.
* scripttempl/i860coff.sc: Delete.
* scripttempl/i960.sc: Delete.
* ld.texinfo: Remove i960 support.
* Makefile.am: Remove i860 and i960 support.
* configure.tgt: Likewise.
* testsuite/ld-discard/extern.d: Likewise.
* testsuite/ld-discard/start.d: Likewise.
* testsuite/ld-discard/static.d: Likewise.
* testsuite/ld-elf/compressed1d.d: Likewise.
* testsuite/ld-elf/group1.d: Likewise.
* testsuite/ld-elf/group3b.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/linkonce2.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/merge2.d: Likewise.
* testsuite/ld-elf/merge3.d: Likewise.
* testsuite/ld-elf/orphan-10.d: Likewise.
* testsuite/ld-elf/orphan-11.d: Likewise.
* testsuite/ld-elf/orphan-12.d: Likewise.
* testsuite/ld-elf/orphan-9.d: Likewise.
* testsuite/ld-elf/orphan-region.d: Likewise.
* testsuite/ld-elf/orphan.d: Likewise.
* testsuite/ld-elf/orphan3.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr12975.d: Likewise.
* testsuite/ld-elf/pr13177.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elf/pr17550a.d: Likewise.
* testsuite/ld-elf/pr17550b.d: Likewise.
* testsuite/ld-elf/pr17550c.d: Likewise.
* testsuite/ld-elf/pr17550d.d: Likewise.
* testsuite/ld-elf/pr17615.d: Likewise.
* testsuite/ld-elf/pr20528a.d: Likewise.
* testsuite/ld-elf/pr20528b.d: Likewise.
* testsuite/ld-elf/pr21562a.d: Likewise.
* testsuite/ld-elf/pr21562b.d: Likewise.
* testsuite/ld-elf/pr21562c.d: Likewise.
* testsuite/ld-elf/pr21562d.d: Likewise.
* testsuite/ld-elf/pr21562i.d: Likewise.
* testsuite/ld-elf/pr21562j.d: Likewise.
* testsuite/ld-elf/pr21562k.d: Likewise.
* testsuite/ld-elf/pr21562l.d: Likewise.
* testsuite/ld-elf/pr21562m.d: Likewise.
* testsuite/ld-elf/pr21562n.d: Likewise.
* testsuite/ld-elf/pr22677.d: Likewise.
* testsuite/ld-elf/pr22836-1a.d: Likewise.
* testsuite/ld-elf/pr22836-1b.d: Likewise.
* testsuite/ld-elf/pr349.d: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-elf/warn1.d: Likewise.
* testsuite/ld-elf/warn2.d: Likewise.
* testsuite/ld-elf/warn3.d: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
Maciej W. Rozycki [Wed, 28 Mar 2018 20:59:01 +0000 (13:59 -0700)] 
binutils/testsuite: Also consider `*-*-lynxos*' and `*-*-symbianelf*' ELF
These targets use the ELF format according to `bfd/config.bfd'.
binutils/
* testsuite/lib/binutils-common.exp (is_elf_format): Also return
1 for `*-*-lynxos*' and `*-*-symbianelf*' targets.
Pedro Alves [Wed, 11 Apr 2018 10:35:58 +0000 (11:35 +0100)]
File I/O file handles after target closes
A future patch will propose making the remote target's target_ops be
heap-allocated (to make it possible to have multiple instances of
remote targets, for multiple simultaneous connections), and will
delete/destroy the remote target at target_close time.
That change trips on a latent problem, though. File I/O handles
remain open even after the target is gone, with a dangling pointer to
a target that no longer exists. This results in GDB crashing when it
calls the target_ops backend associated with the file handle:
(gdb) Disconnect
Ending remote debugging.
* GDB crashes deferencing a dangling pointer
Backtrace:
#0 0x00007f79338570a0 in main_arena () at /lib64/libc.so.6
#1 0x0000000000858bfe in target_fileio_close(int, int*) (fd=1, target_errno=0x7ffe0499a4c8)
at src/gdb/target.c:2980
#2 0x00000000007088bd in gdb_bfd_iovec_fileio_close(bfd*, void*) (abfd=0x1a631b0, stream=0x223c9d0)
at src/gdb/gdb_bfd.c:353
#3 0x0000000000930906 in opncls_bclose (abfd=0x1a631b0) at src/bfd/opncls.c:528
#4 0x0000000000930cf9 in bfd_close_all_done (abfd=0x1a631b0) at src/bfd/opncls.c:768
#5 0x0000000000930cb3 in bfd_close (abfd=0x1a631b0) at src/bfd/opncls.c:735
#6 0x0000000000708dc5 in gdb_bfd_close_or_warn(bfd*) (abfd=0x1a631b0) at src/gdb/gdb_bfd.c:511
#7 0x00000000007091a2 in gdb_bfd_unref(bfd*) (abfd=0x1a631b0) at src/gdb/gdb_bfd.c:615
#8 0x000000000079ed8e in objfile::~objfile() (this=0x2154730, __in_chrg=<optimized out>)
at src/gdb/objfiles.c:682
#9 0x000000000079fd1a in objfile_purge_solibs() () at src/gdb/objfiles.c:1065
#10 0x00000000008162ca in no_shared_libraries(char const*, int) (ignored=0x0, from_tty=1)
at src/gdb/solib.c:1251
#11 0x000000000073b89b in disconnect_command(char const*, int) (args=0x0, from_tty=1)
at src/gdb/infcmd.c:3035
This goes unnoticed in current master, because the current remote
target's target_ops is never destroyed nowadays, so we end up calling:
remote_hostio_close -> remote_hostio_send_command
which gracefully fails with FILEIO_ENOSYS if remote_desc is NULL
(because the target is closed).
Fix this by invalidating a target's file I/O handles when the target
is closed.
With this change, remote_hostio_send_command no longer needs to handle the
case of being called with a closed remote target, originally added here:
<https://sourceware.org/ml/gdb-patches/2008-08/msg00359.html>.
gdb/ChangeLog:
2018-04-11 Pedro Alves <palves@redhat.com>
* target.c (fileio_fh_t::t): Add comment.
(target_fileio_pwrite, target_fileio_pread, target_fileio_fstat)
(target_fileio_close): Handle a NULL target.
(invalidate_fileio_fh): New.
(target_close): Call it.
* remote.c (remote_hostio_send_command): No longer check whether
remote_desc is open.
Pedro Alves [Wed, 11 Apr 2018 10:29:39 +0000 (11:29 +0100)]
C++ify fileio_fh_t, replace VEC with std::vector
Preparation for the next patch.
- Replace VEC with std::vector.
- Rewrite a couple macros as methods/functions.
- While at it, rename fileio_fh_t::fd as fileio_fh_t::target_fd to
avoid confusion between target and host file descriptors.
gdb/ChangeLog:
2018-04-11 Pedro Alves <palves@redhat.com>
* target.c (fileio_fh_t): Make it a named struct instead of a
typedef.
(fileio_fh_t::is_closed): New method.
(DEF_VEC_O (fileio_fh_t)): Remove.
(fileio_fhandles): Now a std::vector.
(is_closed_fileio_fh): Delete.
(acquire_fileio_fd): Adjust. Rename parameters.
(release_fileio_fd): Adjust.
(fileio_fd_to_fh): Reimplement as a function instead of a macro.
(target_fileio_pwrite, target_fileio_pread, target_fileio_fstat)
(target_fileio_close): Adjust.
Alan Modra [Wed, 11 Apr 2018 01:40:18 +0000 (11:10 +0930)]
Silence nds32 pic warnings
Fixes:
FAIL: Build pr22471a.so
FAIL: Build pr22471b.so
FAIL: Build pr22649-1.so
FAIL: Build pr22649-2c.so
FAIL: Build pr22649-2d.so
FAIL: PR ld/20828 dynamic symbols with section GC (auxiliary shared library)
FAIL: PR ld/20828 dynamic symbols with section GC (plain)
FAIL: PR ld/20828 dynamic symbols with section GC (version script)
FAIL: PR ld/20828 dynamic symbols with section GC (versioned shared library)
FAIL: PR ld/20828 dynamic symbols with section GC (versioned)
FAIL: PR ld/21233 dynamic symbols with section GC (auxiliary shared library)
FAIL: Build pr22150.so
FAIL: Build shared library for pr14170
FAIL: PR ld/21703 shared
FAIL: Build shared library for broken linker script test
FAIL: Build pr17068.so
FAIL: -Bsymbolic-functions
FAIL: Build pr20995.so
FAIL: Build pr20995-2.so
FAIL: Build pr22374 shared library
* testsuite/ld-elf/shared.exp (AFLAGS_PIC): Add -mpic for nds32.
GDB Administrator [Wed, 11 Apr 2018 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Tue, 10 Apr 2018 20:50:59 +0000 (16:50 -0400)]
Iterate by index in auto_load_safe_path_vec_update
As reported by Jan, we get this error when building with -D_GLIBCXX_DEBUG:
/usr/include/c++/7/debug/safe_iterator.h:297:
Error: attempt to increment a singular iterator.
Objects involved in the operation:
iterator "this" @ 0x0x7fffffffd140 {
type = __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<char, gdb::xfree_deleter<char> >*, std::__cxx1998::vector<std::unique_ptr<char, gdb::xfree_deleter<char> >, std::allocator<std::unique_ptr<char, gdb::xfree_deleter<char> > > > >, std::__debug::vector<std::unique_ptr<char, gdb::xfree_deleter<char> >, std::allocator<std::unique_ptr<char, gdb::xfree_deleter<char> > > > > (mutable iterator);
state = singular;
references sequence with type 'std::__debug::vector<std::unique_ptr<char, gdb::xfree_deleter<char> >, std::allocator<std::unique_ptr<char, gdb::xfree_deleter<char> > > >' @ 0x0x265db40
}
The bug was introduced by commit
commit
e80aaf6183c6692ecc167bf26cbdc53f8f1a55f0
Author: Simon Marchi <simon.marchi@polymtl.ca>
Date: Fri Mar 2 23:22:06 2018 -0500
Make delim_string_to_char_ptr_vec return an std::vector
The problem is that we iterate using a range-based for on a vector to
which we push in the loop. Pushing to the vector invalidates the
iterator used in the loop. Instead, change the code to iterate by index
as was done in the previous code.
gdb/ChangeLog:
* auto-load.c (auto_load_safe_path_vec_update): Iterate by
index.
Pedro Alves [Tue, 10 Apr 2018 14:00:39 +0000 (15:00 +0100)]
Fix gdb.base/fork-running-state.exp race
On my multi-target branch I was occasionaly seeing a FAIL like this:
(gdb) PASS: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: non-stop: kill parent
[Inferior 2 (process 32672) exited normally]
kill inferior 2
warning: Inferior ID 2 is not running.
(gdb) FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: non-stop: kill child (the program exited)
... other similar fails ...
Turns out to be a testcase bug/race. A tweak like this increases the
changes of hitting the race substancially:
--- a/gdb/testsuite/gdb.base/fork-running-state.c
+++ b/gdb/testsuite/gdb.base/fork-running-state.c
@@ -29,7 +29,7 @@ fork_child (void)
{
while (1)
{
- sleep (1);
+ usleep (100);
The testcase has two processes, parent and child fork. The problem is
that the child exits itself if it notices the parent is gone, but the
testcase .exp does not expect that.
I first wrote a patch that handled the different combinations of
non-stop/detach-on-fork/follow-fork/schedule-multiple, making the .exp
file know when to expect the child to exit itself vs when to kill it
explicitly, but the result was that the code to kill the parent and
child was getting about as large as the test code that is the actual
point of the testcase, above the kills.
So I scratched that approach and came up with a simpler patch --
simply make the child not exit itself when the parent exits.
The .exp file is going to kill both parent and child explicitly, and,
main() already calls alarm() as a safeguard. I don't think we lose
anything.
gdb/testsuite/ChangeLog:
2018-04-10 Pedro Alves <palves@redhat.com>
* gdb.base/fork-running-state.c (fork_child): Don't exit if parent
exits. Instead loop running forever.
(fork_parent): Run forever too.
Pedro Alves [Tue, 10 Apr 2018 13:49:30 +0000 (14:49 +0100)]
Replace finish_thread_state_cleanup with a RAII class
gdb/ChangeLog:
2018-04-10 Pedro Alves <palves@redhat.com>
* gdbthread.h (finish_thread_state_cleanup): Delete declaration.
(scoped_finish_thread_state): New class.
* infcmd.c (run_command_1): Use it instead of finish_thread_state
cleanup.
* infrun.c (proceed, prepare_for_detach, wait_for_inferior)
(fetch_inferior_event, normal_stop): Likewise.
* thread.c (finish_thread_state_cleanup): Delete.
Alan Modra [Mon, 9 Apr 2018 23:44:29 +0000 (09:14 +0930)]
Fix some strip test fails on nds32 and pru
Fixes these fails:
nds32le-linux +FAIL: binutils-all/strip-14
nds32le-linux +FAIL: binutils-all/strip-15
pru-elf +FAIL: binutils-all/strip-14
pru-elf +FAIL: binutils-all/strip-15
strip-13 fails on nds32 due to an assertion failure and out of bounds
access to nds32_elf_howto_table.
* testsuite/binutils-all/objcopy.exp (strip-14, strip-15): Choose
reloc=11 for pru and reloc=50 for nds32.
* testsuite/binutils-all/strip-15.d: Accept 0xb reloc number.
GDB Administrator [Tue, 10 Apr 2018 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Mon, 9 Apr 2018 19:45:39 +0000 (15:45 -0400)]
Add selftests for range_contains and insert_into_bit_range_vector
Add some selftests for these two functions. To to make it easier to
compare sequences of ranges, add operator== and operator!= to compare
two gdb::array_view, and add operator== in struct range.
gdb/ChangeLog:
* value.c: Include "selftest.h" and "common/array-view.h".
(struct range) <operator ==>: New.
(test_ranges_contain): New.
(check_ranges_vector): New.
(test_insert_into_bit_range_vector): New.
(_initialize_values): Register selftests.
* common/array-view.h (operator==, operator!=): New.
Simon Marchi [Mon, 9 Apr 2018 19:40:45 +0000 (15:40 -0400)]
Use an std::vector for inline_states
This patch replaces VEC(inline_state) with std::vector<inline_state> and
adjusts the code that uses it.
gdb/ChangeLog:
* common/gdb_vecs.h (unordered_remove): Add overload that takes
an iterator.
* inline-frame.c: Include <algorithm>.
(struct inline_state): Add constructor.
(inline_state_s): Remove.
(DEF_VEC_O(inline_state_s)): Remove.
(inline_states): Change type to std::vector.
(find_inline_frame_state): Adjust to std::vector.
(allocate_inline_frame_state): Remove.
(clear_inline_frame_state): Adjust to std::vector.
(skip_inline_frames): Adjust to std::vector.
Simon Marchi [Mon, 9 Apr 2018 19:16:19 +0000 (15:16 -0400)]
Remove VEC(tsv_s), use std::vector instead
This patch removes VEC(tsv_s), using an std::vector instead. I C++ified
trace_state_variable a bit in the process, using std::string for the
name. I also thought it would be nicer to pass a const reference to
target_download_trace_state_variable, since we know it will never be
NULL. This highlighted that the make-target-delegates script didn't
handle references well, so I adjusted this as well. It will surely be
useful in the future.
gdb/ChangeLog:
* tracepoint.h (struct trace_state_variable): Add constructor.
<name>: Change type to std::string.
* tracepoint.c (tsv_s): Remove.
(DEF_VEC_O(tsv_s)): Remove.
(tvariables): Change to std::vector.
(create_trace_state_variable): Adjust to std::vector.
(find_trace_state_variable): Likewise.
(find_trace_state_variable_by_number): Likewise.
(delete_trace_state_variable): Likewise.
(trace_variable_command): Adjust to std::string.
(delete_trace_variable_command): Likewise.
(tvariables_info_1): Adjust to std::vector.
(save_trace_state_variables): Likewise.
(start_tracing): Likewise.
(merge_uploaded_trace_state_variables): Adjust to std::vector
and std::string.
* target.h (struct target_ops)
<to_download_trace_state_variable>: Pass reference to
trace_state_variable.
* target-debug.h (target_debug_print_const_trace_state_variable_r): New.
* target-delegates.c: Re-generate.
* mi/mi-interp.c (mi_tsv_created): Adjust to std::string.
(mi_tsv_deleted): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* remote.c (remote_download_trace_state_variable): Change
pointer to reference and adjust.
* make-target-delegates (parse_argtypes): Handle references.
(write_function_header): Likewise.
(munge_type): Likewise.
Simon Marchi [Mon, 9 Apr 2018 17:31:06 +0000 (13:31 -0400)]
Adapt and integrate string_view tests
The previous patch copied the string_view tests from libstdc++. This
patch adjusts them in a similar way that the libstdc++ optional tests
are integrated in our unit test suite.
Not all tests are used, some of them require language features not
present in c++11. For example, we can't use a string_view constructor
where the length is not explicit in a constexpr, because
std::char_traits::length is not a constexpr itself (it is in c++17
though). Nevertheless, a good number of tests are integrated, which
covers pretty well the string_view features.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
string_view-selftests.c.
* unittests/basic_string_view/capacity/1.cc: Adapt to GDB
testsuite.
* unittests/basic_string_view/cons/char/1.cc: Likewise.
* unittests/basic_string_view/cons/char/2.cc: Likewise.
* unittests/basic_string_view/cons/char/3.cc: Likewise.
* unittests/basic_string_view/element_access/char/1.cc:
Likewise.
* unittests/basic_string_view/element_access/char/empty.cc:
Likewise.
* unittests/basic_string_view/element_access/char/front_back.cc:
Likewise.
* unittests/basic_string_view/inserters/char/2.cc: Likewise.
* unittests/basic_string_view/modifiers/remove_prefix/char/1.cc:
Likewise.
* unittests/basic_string_view/modifiers/remove_suffix/char/1.cc:
Likewise.
* unittests/basic_string_view/modifiers/swap/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/compare/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/compare/char/13650.cc:
Likewise.
* unittests/basic_string_view/operations/copy/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/data/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/2.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/3.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/4.cc:
Likewise.
* unittests/basic_string_view/operations/rfind/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/rfind/char/2.cc:
Likewise.
* unittests/basic_string_view/operations/rfind/char/3.cc:
Likewise.
* unittests/basic_string_view/operations/substr/char/1.cc:
Likewise.
* unittests/basic_string_view/operators/char/2.cc: Likewise.
* unittests/string_view-selftests.c: New file.
Simon Marchi [Mon, 9 Apr 2018 17:31:05 +0000 (13:31 -0400)]
Copy string_view tests from libstdc++
This patch copies the string_view tests from the gcc repository (commit
02a4441f002c).
${gcc}/libstdc++-v3/testsuite/21_strings/basic_string_view ->
${binutils-gdb}/gdb/unittests/basic_string_view
The local modifications are done in the following patch, so that it's
easier to review them.
gdb/ChangeLog:
* unittests/basic_string_view/capacity/1.cc: New file.
* unittests/basic_string_view/capacity/empty_neg.cc: New file.
* unittests/basic_string_view/cons/char/1.cc: New file.
* unittests/basic_string_view/cons/char/2.cc: New file.
* unittests/basic_string_view/cons/char/3.cc: New file.
* unittests/basic_string_view/cons/wchar_t/1.cc: New file.
* unittests/basic_string_view/cons/wchar_t/2.cc: New file.
* unittests/basic_string_view/cons/wchar_t/3.cc: New file.
* unittests/basic_string_view/element_access/char/1.cc: New file.
* unittests/basic_string_view/element_access/char/2.cc: New file.
* unittests/basic_string_view/element_access/char/empty.cc: New file.
* unittests/basic_string_view/element_access/char/front_back.cc: New file.
* unittests/basic_string_view/element_access/wchar_t/1.cc: New file.
* unittests/basic_string_view/element_access/wchar_t/2.cc: New file.
* unittests/basic_string_view/element_access/wchar_t/empty.cc: New file.
* unittests/basic_string_view/element_access/wchar_t/front_back.cc: New file.
* unittests/basic_string_view/include.cc: New file.
* unittests/basic_string_view/inserters/char/1.cc: New file.
* unittests/basic_string_view/inserters/char/2.cc: New file.
* unittests/basic_string_view/inserters/char/3.cc: New file.
* unittests/basic_string_view/inserters/pod/10081-out.cc: New file.
* unittests/basic_string_view/inserters/wchar_t/1.cc: New file.
* unittests/basic_string_view/inserters/wchar_t/2.cc: New file.
* unittests/basic_string_view/inserters/wchar_t/3.cc: New file.
* unittests/basic_string_view/literals/types.cc: New file.
* unittests/basic_string_view/literals/values.cc: New file.
* unittests/basic_string_view/modifiers/remove_prefix/char/1.cc: New file.
* unittests/basic_string_view/modifiers/remove_prefix/wchar_t/1.cc: New file.
* unittests/basic_string_view/modifiers/remove_suffix/char/1.cc: New file.
* unittests/basic_string_view/modifiers/remove_suffix/wchar_t/1.cc: New file.
* unittests/basic_string_view/modifiers/swap/char/1.cc: New file.
* unittests/basic_string_view/modifiers/swap/wchar_t/1.cc: New file.
* unittests/basic_string_view/operations/compare/char/1.cc: New file.
* unittests/basic_string_view/operations/compare/char/13650.cc: New file.
* unittests/basic_string_view/operations/compare/char/2.cc: New file.
* unittests/basic_string_view/operations/compare/char/70483.cc: New file.
* unittests/basic_string_view/operations/compare/wchar_t/1.cc: New file.
* unittests/basic_string_view/operations/compare/wchar_t/13650.cc: New file.
* unittests/basic_string_view/operations/compare/wchar_t/2.cc: New file.
* unittests/basic_string_view/operations/copy/char/1.cc: New file.
* unittests/basic_string_view/operations/copy/wchar_t/1.cc: New file.
* unittests/basic_string_view/operations/data/char/1.cc: New file.
* unittests/basic_string_view/operations/data/wchar_t/1.cc: New file.
* unittests/basic_string_view/operations/find/char/1.cc: New file.
* unittests/basic_string_view/operations/find/char/2.cc: New file.
* unittests/basic_string_view/operations/find/char/3.cc: New file.
* unittests/basic_string_view/operations/find/char/4.cc: New file.
* unittests/basic_string_view/operations/find/wchar_t/1.cc: New file.
* unittests/basic_string_view/operations/find/wchar_t/2.cc: New file.
* unittests/basic_string_view/operations/find/wchar_t/3.cc: New file.
* unittests/basic_string_view/operations/find/wchar_t/4.cc: New file.
* unittests/basic_string_view/operations/rfind/char/1.cc: New file.
* unittests/basic_string_view/operations/rfind/char/2.cc: New file.
* unittests/basic_string_view/operations/rfind/char/3.cc: New file.
* unittests/basic_string_view/operations/rfind/wchar_t/1.cc: New file.
* unittests/basic_string_view/operations/rfind/wchar_t/2.cc: New file.
* unittests/basic_string_view/operations/rfind/wchar_t/3.cc: New file.
* unittests/basic_string_view/operations/string_conversion/1.cc: New file.
* unittests/basic_string_view/operations/substr/char/1.cc: New file.
* unittests/basic_string_view/operations/substr/wchar_t/1.cc: New file.
* unittests/basic_string_view/operators/char/2.cc: New file.
* unittests/basic_string_view/operators/wchar_t/2.cc: New file.
* unittests/basic_string_view/range_access/char/1.cc: New file.
* unittests/basic_string_view/range_access/wchar_t/1.cc: New file.
* unittests/basic_string_view/requirements/explicit_instantiation/1.cc: New file.
* unittests/basic_string_view/requirements/explicit_instantiation/char/1.cc: New file.
* unittests/basic_string_view/requirements/explicit_instantiation/char16_t/1.cc: New file.
* unittests/basic_string_view/requirements/explicit_instantiation/char32_t/1.cc: New file.
* unittests/basic_string_view/requirements/explicit_instantiation/wchar_t/1.cc: New file.
* unittests/basic_string_view/requirements/typedefs.cc: New file.
* unittests/basic_string_view/typedefs.cc: New file.
* unittests/basic_string_view/types/1.cc: New file.
Simon Marchi [Mon, 9 Apr 2018 17:31:04 +0000 (13:31 -0400)]
Add gdb::string_view
We had a few times the need for a data structure that does essentially
what C++17's std::string_view does, which is to give an std::string-like
interface (only the read-only operations) to an arbitrary character
buffer.
This patch adapts the files copied from libstdc++ by the previous patch
to integrate them with GDB. Here's a summary of the changes:
* Remove things related to wstring_view, u16string_view and
u32string_view (I don't think we need them, but we can always add them
later).
* Remove usages of _GLIBCXX_BEGIN_NAMESPACE_VERSION and
_GLIBCXX_END_NAMESPACE_VERSION.
* Put the code in the gdb namespace. I had to add a few "std::" in
front of std type usages.
* Change __throw_out_of_range_fmt() for error().
* Make gdb::string_view an alias of std::string_view when building
with >= c++17.
* Remove a bunch of constexpr, because they are not valid in c++11
(e.g. they are not a single return line).
* Use std::common_type<_Tp>::type instead of std::common_type_t<_Tp>,
because c++11 doesn't have the later.
* Remove the #pragma GCC system_header, since that silences some
warnings that we might want to have if we're doing something not
correctly.
* Remove operator ""sv. It would need a lot of work to make all
supported compilers happy, and we can easily live without it.
* Remove operator<<. It is implemented using __ostream_insert (a
libstdc++ internal). Bringing it in might be possible, but I don't
think that would be worth the effort, since we don't really use
streams at the moment.
* Replace internal libstdc++ asserts ( __glibcxx_assert and
__glibcxx_requires_string_len) with gdb_assert.
* Remove hash helpers, because they use libstdc++ internal functions.
If we need them we always import them later.
The string_view class in cli/cli-script.c is removed and its usage
replaced with the new gdb::string_view.
gdb/ChangeLog:
* common/gdb_string_view.h: Remove libstdc++ implementation
details, adjust to gdb reality.
* common/gdb_string_view.tcc: Likewise.
* cli/cli-script.c (struct string_view): Remove.
(user_args) <m_args>: Change element type to gdb::string_view.
(user_args::insert_args): Adjust.
Simon Marchi [Mon, 9 Apr 2018 17:31:04 +0000 (13:31 -0400)]
Copy string_view files from libstdc++
This patch copies the following files from libstdc++ (commit
02a4441f002c):
${gcc}/libstdc++-v3/include/experimental/string_view
-> ${binutils-gdb}/gdb/common/gdb_string_view.h
${gcc}/libstdc++-v3/include/experimental/bits/string_view.tcc
-> ${binutils-gdb}/gdb/common/gdb_string_view.tcc
The local modifications are done in the following patch in order to make
it easier to review them.
gdb/ChangeLog:
* common/gdb_string_view.h: New file.
* common/gdb_string_view.tcc: New file.
Simon Marchi [Mon, 9 Apr 2018 17:31:03 +0000 (13:31 -0400)]
Update ax_cv_cxx_compile_cxx.m4
This file provides the AX_CXX_COMPILE_STDCXX macro. In the context of
the following patch, I wanted to build and test GDB in c++17 mode. The
version of the macro we have in the repo does not support detecting
c++17 compilers, but the upstream version has been updated to do so.
Since we have local modifications to the file, I had to reconcile our
modifications and the updated upstream version (which was relatively
straightforward).
gdb/ChangeLog:
* ax_cxx_compile_stdcxx.m4: Sync with upstream.
* configure: Re-generate.
Alan Modra [Mon, 9 Apr 2018 09:22:11 +0000 (18:52 +0930)]
Regenerate some files
The gold change is to pick up HJ's PR22318 AC_PLUGINS update. The
ld change is to correct a file I generated from a modified tree.
gold/
* configure: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
Pedro Alves [Mon, 9 Apr 2018 14:34:48 +0000 (15:34 +0100)]
Apply "Convert observers to C++" edit to gdbarch.sh
Regenerating gdbarch.c results in:
--- gdbarch.c 2018-03-26 23:18:52.
905548891 +0100
+++ new-gdbarch.c 2018-04-09 15:32:30.
006712207 +0100
@@ -44,7 +44,7 @@
#include "reggroups.h"
#include "osabi.h"
#include "gdb_obstack.h"
-#include "observable.h"
+#include "observer.h"
#include "regcache.h"
#include "objfiles.h"
#include "auxv.h"
@@ -5457,7 +5457,7 @@
gdb_assert (new_gdbarch != NULL);
gdb_assert (new_gdbarch->initialized_p);
current_inferior ()->gdbarch = new_gdbarch;
- gdb::observers::architecture_changed.notify (new_gdbarch);
+ observer_notify_architecture_changed (new_gdbarch);
registers_changed ();
}
Clearly commit
76727919ceb5 ("Convert observers to C++") edited
gdbarch.c directly instead of gdbarch.sh. This fixes it.
gdb/ChangeLog:
2018-04-09 Pedro Alves <palves@redhat.com>
* gdbarch.sh: Include "observable.h" instead of "observer.h".
(set_target_gdbarch): Call
gdb::observers::architecture_changed.notify instead of
observer_notify_architecture_changed.
Maciej W. Rozycki [Mon, 9 Apr 2018 12:42:01 +0000 (13:42 +0100)]
binutils/testsuite: Fix a crash with STN_UNDEF in relocation
Verify that `strip' completes successfully and a correct relocation
entry is copied for a relocation encountered with the STN_UNDEF symbol
index.
binutils/
* testsuite/binutils-all/strip-15.d: New test.
* testsuite/binutils-all/strip-15rel.s: New test source.
* testsuite/binutils-all/strip-15rela.s: New test source.
* testsuite/binutils-all/strip-15mips64.s: New test source.
* testsuite/binutils-all/objcopy.exp: Run the new test.
This page took 0.061109 seconds and 4 git commands to generate.
projects / deliverable / binutils-gdb.git / log
