drtracing.org Git - deliverable/linux.git/log

kprobes: Optimize hot path by using percpu counter to collect 'nhit' statistics

When doing ebpf+kprobe on some hot TCP functions (e.g.
tcp_rcv_established), the kprobe_dispatcher() function
shows up in 'perf report'.

In kprobe_dispatcher(), there is a lot of cache bouncing
on 'tk->nhit++'.  'tk->nhit' and 'tk->tp.flags' also share
the same cacheline.

perf report (cycles:pp):

8.30%  ipv4_dst_check
4.74%  copy_user_enhanced_fast_string
3.93%  dst_release
2.80%  tcp_v4_rcv
2.31%  queued_spin_lock_slowpath
2.30%  _raw_spin_lock
1.88%  mlx4_en_process_rx_cq
1.84%  eth_get_headlen
1.81%  ip_rcv_finish
~~~~
1.71%  kprobe_dispatcher
~~~~
1.55%  mlx4_en_xmit
1.09%  __probe_kernel_read

perf report after patch:

9.15%  ipv4_dst_check
5.00%  copy_user_enhanced_fast_string
4.12%  dst_release
2.96%  tcp_v4_rcv
2.50%  _raw_spin_lock
2.39%  queued_spin_lock_slowpath
2.11%  eth_get_headlen
2.03%  mlx4_en_process_rx_cq
1.69%  mlx4_en_xmit
1.19%  ip_rcv_finish
1.12%  __probe_kernel_read
1.02%  ehci_hcd_cleanup

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Kernel Team <kernel-team@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454531308-2441898-1-git-send-email-kafai@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible fixes:

- Handle spaces in file names obtained from /proc/pid/maps (Marcin Ślusarz)

New features:

- Improved support for Java, using the JVMTI agent library to do jitdumps
   that then will be inserted in synthesized PERF_RECORD_MMAP2 events via
   'perf inject' pointed to synthesized ELF files stored in ~/.debug and
   keyed with build-ids, to allow symbol resolution and even annotation with
   source line info, see the changeset comments to see how to use it (Stephane Eranian)

Documentation changes:

- Document mmore variables in the 'perf config' man page (Taeung Song)

Infrastructure changes:

- Improve a bit the 'make -C tools/perf build-test' output (Arnaldo Carvalho de Melo)

- Do 'build-test' in parallel, using 'make -j' (Arnaldo Carvalho de Melo)

- Fix handling of 'clean' in multi-target make invokations for parallell builds (Jiri Olsa)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Move perf_event_amd_uncore.c .... => x86/events/amd/uncore.c

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1454947748-28629-6-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Move perf_event_amd_iommu.[ch] .. => x86/events/amd/iommu.[ch]

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1454947748-28629-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Move perf_event_amd_ibs.c ....... => x86/events/amd/ibs.c

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1454947748-28629-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Move perf_event_amd.c ........... => x86/events/amd/core.c

We distribute those in vendor subdirs, starting with .../events/amd/.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1454947748-28629-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Move perf_event.c ............... => x86/events/core.c

Also, keep the churn at minimum by adjusting the include "perf_event.h"
when each file gets moved.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1454947748-28629-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'x86/cpu' into perf/core, to pick up dependency

Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf jit: add source line info support

This patch adds source line information support to perf for jitted code.

The source line info must be emitted by the runtime, such as JVMTI.

Perf injects extract the source line info from the jitdump file and adds
the corresponding .debug_lines section in the ELF image generated for
each jitted function.

The source line enables matching any address in the profile with a
source file and line number.

The improvement is visible in perf annotate with the source code
displayed alongside the assembly code.

The dwarf code leverages the support from OProfile which is also
released under GPLv2. Copyright 2007 OProfile authors.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-5-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: add JVMTI agent library

This is a standalone JVMTI library to help  profile Java jitted code with perf
record/perf report. The library is not installed or compiled automatically by
perf Makefile. It is not used directly by perf. It is arch agnostic and has
been tested on X86 and ARM. It needs to be used with a Java runtime, such as
OpenJDK, as follows:

  $ java -agentpath:libjvmti.so .......

See the "Committer Notes" below on how to build it.

When used this way, java will generate a jitdump binary file in
$HOME/.debug/java/jit/java-jit-*

This binary dump file contains information to help symbolize and
annotate jitted code.

The jitdump information must be injected into the perf.data file
using:

  $ perf inject --jit -i perf.data -o perf.data.jitted

This injects the MMAP records to cover the jitted code and also generates
one ELF image for each jitted function. The ELF images are created in the
same subdir as the jitdump file. The MMAP records point there too.

Then, to visualize the function or asm profile, simply use the regular
perf commands:

  $ perf report -i perf.data.jitted

or

  $ perf annotate -i perf.data.jitted

JVMTI agent code adapted from the OProfile's opagent code.

This version of the JVMTI agent is using the CLOCK_MONOTONIC as the time
source to timestamp jit samples. To correlate with perf_events samples,
it needs to run on kernel 4.0.0-rc5+ or later with the following commit
from Peter Zijlstra:

  34f439278cef ("perf: Add per event clockid support")

With this patch recording jitted code is done as follows:

   $ perf record -k mono -- java -agentpath:libjvmti.so .......

--------------------------------------------------------------------------

Committer Notes:

Extended testing instructions:

  $ cd tools/perf/jvmti/
  $ dnf install java-devel
  $ make

Then, create some simple java stuff to record some samples:

  $ cat hello.java
  public class hello {
public static void main(String[] args) {
                 System.out.println("Hello, World");
        }
  }
  $ javac hello.java
  $ java hello
  Hello, World
  $

And then record it using this jvmti thing:

  $ perf record -k mono java -agentpath:/home/acme/git/linux/tools/perf/jvmti/libjvmti.so hello
  java: jvmti: jitdump in /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jit-1908.dump
  Hello, World
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.030 MB perf.data (268 samples) ]
  $

Now lets insert the PERF_RECORD_MMAP2 records to point jitted mmaps to
files created by the agent:

  $ perf inject --jit -i perf.data -o perf.data.jitted

And finally see that it did its job:

  $ perf report -D -i perf.data.jitted | grep PERF_RECORD_MMAP2 | tail -5
  79197149129422 0xfe10 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428bd60(0x80) @ 0x40 fd:02 1840554 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-283.so
  79197149235701 0xfeb0 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428ba60(0x180) @ 0x40 fd:02 1840555 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-284.so
  79197149250558 0xff50 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428b860(0x180) @ 0x40 fd:02 1840556 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-285.so
  79197149714746 0xfff0 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428b660(0x180) @ 0x40 fd:02 1840557 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-286.so
  79197149806558 0x10090 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428b460(0x180) @ 0x40 fd:02 1840558 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-287.so
  $

So:

  $ perf report -D -i perf.data | grep PERF_RECORD_MMAP2 | wc -l
  Failed to open /tmp/perf-1908.map, continuing without symbols
  21
  $ perf report -D -i perf.data.jitted | grep PERF_RECORD_MMAP2 | wc -l
  307
  $ echo $((307 - 21))
  286
  $

286 extra PERF_RECORD_MMAP2 records.

All for thise tiny, with just one function, ELF files:

  $ file /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so
  /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), corrupted program header size, BuildID[sha1]=ae54a2ebc3ecf0ba547bfc8cabdea1519df5203f, not stripped
  $ readelf -sw /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so

  Symbol table '.symtab' contains 2 entries:
   Num:    Value          Size Type    Bind   Vis      Ndx Name
     0: 0000000000000000     0 NOTYPE  LOCAL  DEFAULT  UND
     1: 0000000000000040     9 FUNC    LOCAL  DEFAULT    1 atomic_cmpxchg_long
  $

Inserted into the build-id cache:

  $ ls -la ~/.debug/.build-id/ae/54a2ebc3ecf0ba547bfc8cabdea1519df5203f
  lrwxrwxrwx. 1 acme acme 111 Feb  5 11:30 /home/acme/.debug/.build-id/ae/54a2ebc3ecf0ba547bfc8cabdea1519df5203f -> ../../home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so/ae54a2ebc3ecf0ba547bfc8cabdea1519df5203f

Note: check why 'file' reports that 'corrupted program header size'.

With a stupid java hog to do some profiling:

$ cat hog.java
  public class hog {
private static double do_something_else(int i) {
double total = 0;
while (i > 0) {
total += Math.log(i--);
}
return total;
}
private static double do_something(int i) {
double total = 0;
while (i > 0) {
total += Math.sqrt(i--) + do_something_else(i / 100);
}
return total;
}
public static void main(String[] args) {
System.out.println(String.format("%s=%f & %f", args[0],
   do_something(Integer.parseInt(args[0])),
   do_something_else(Integer.parseInt(args[1]))));
}
  }
  $ javac hog.java
  $ perf record -F 10000 -g -k mono java -agentpath:/home/acme/git/linux/tools/perf/jvmti/libjvmti.so hog 100000 2345000
  java: jvmti: jitdump in /home/acme/.debug/jit/java-jit-20160205.XX4sqd14/jit-8670.dump
  100000=291561592.669602 & 32050989.778714
  [ perf record: Woken up 6 times to write data ]
  [ perf record: Captured and wrote 1.536 MB perf.data (12538 samples) ]
  $ perf inject --jit -i perf.data -o perf.data.jitted

Looking at the 'perf report' TUI, at one expanded callchain leading
to the jitted code:

  $ perf report --no-children -i perf.data.jitted

Samples: 12K of event 'cycles:pp', Event count (approx.): 3829569932
  Overhead  Comm  Shared Object       Symbol
-   93.38%  java  jitted-8670-291.so  [.] class hog.do_something_else(int)
     class hog.do_something_else(int)
   - Interpreter
      - 75.86% call_stub
           JavaCalls::call_helper
           jni_invoke_static
           jni_CallStaticVoidMethod
           JavaMain
           start_thread
      - 17.52% JavaCalls::call_helper
           jni_invoke_static
           jni_CallStaticVoidMethod
           JavaMain
           start_thread

Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-4-git-send-email-eranian@google.com
[ Made it build on fedora23, added some build/usage instructions ]
[ Check if filename != NULL in compiled_method_load_cb, fixing segfault ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf inject: Add jitdump mmap injection support

This patch adds a --jit/-j option to perf inject.

This options injects MMAP records into the perf.data file to cover the
jitted code mmaps. It also emits ELF images for each function in the
jidump file.  Those images are created where the jitdump file is.  The
MMAP records point to that location as well.

Typical flow:

  $ perf record -k mono -- java -agentpath:libpjvmti.so java_class
  $ perf inject --jit -i perf.data -o perf.data.jitted
  $ perf report -i perf.data.jitted

Note that jitdump.h support is not limited to Java, it works with any
jitted environment modified to emit the jitdump file format, include
those where code can be jitted multiple times and moved around.

The jitdump.h format is adapted from the Oprofile project.

The genelf.c (ELF binary generation) depends on MD5 hash encoding for
the buildid. To enable this, libssl-dev must be installed. If not, then
genelf.c defaults to using urandom to generate the buildid, which is not
ideal.  The Makefile auto-detects the presence on libssl-dev.

This version mmaps the jitdump file to create a marker MMAP record in
the perf.data file. The marker is used to detect jitdump and cause perf
inject to inject the jitted mmaps and generate ELF images for jitted
functions.

In V8, the following fixes and changes were made among other things:

  -  the jidump header format include a new flags field to be used
     to carry information about the configuration of the runtime agent.
     Contributed by: Adrian Hunter <adrian.hunter@intel.com>

  - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file
    at which the code resides.
    Contributed by: Adrian Hunter <adrian.hunter@intel.com>

  - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic
    objects to match the file offset.
    Contributed by: Adrian Hunter <adrian.hunter@intel.com>

  - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all
    MMAP events in one go, so it does not obey finished_round semantics, so drop the
    finished_round events from the output perf.data file.
    Contributed by: Adrian Hunter <adrian.hunter@intel.com>

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com
[ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf inject: Make sure mmap records are ordered when injecting build_ids

To make sure the mmap records are ordered correctly and so that the
correct especially due to jitted code mmaps.

We cannot generate the buildid hit list and inject the jit mmaps (will
come right after this patch) in at the same time for now.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com
[ Carved out from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Add libcrypto feature detection

Will be used to generate build-ids in the jitdump code.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com
[ tools/perf/Makefile.perf comment about NO_LIBCRYPTO and added it to tests/make ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: add Java demangling support

Add Java function descriptor demangling support. Something bfd cannot
do.

Use the JAVA_DEMANGLE_NORET flag to avoid decoding the return type of
functions.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: handle spaces in file names obtained from /proc/pid/maps

Steam frequently puts game binaries in folders with spaces.

Note: "(deleted)" markers are now treated as part of the file name.

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 6064803313ba ("perf tools: Use sscanf for parsing /proc/pid/maps")
Link: http://lkml.kernel.org/r/20160119190303.GA17579@marcin-Inspiron-7720
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build tests: Do parallell builds with 'build-test'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jhmnf9g7y9ryqcjql00unk5y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix parallel build including 'clean' target

Do not parallelize 'clean' with other targets, figure out if it is
present and do it first, then the other targets.

Noticed with:

  tools/perf> make -j24 clean all

   LD       arch/libperf-in.o
   LD       plugin_xen-in.o
arch//libperf-in.o: file not recognized: File truncated
make[3]: *** [arch/libperf-in.o] Error 1
make[2]: *** [arch] Error 2
make[2]: *** Waiting for unfinished jobs....
   AR       libapi.a

Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kb0qs29zbz7hxn32mc5zbsoz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Document 'record.build-id' variable in man page

Explain 'record.build-id' variable.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-9-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Document 'kmem.default' variable in man page

Explain 'kmem.default' variable.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-8-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Document 'pager.<subcommand>' variables in man page

Explain 'pager.<subcommand>' variables.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-7-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Document 'man.viewer' variable in man page

Explain 'man.viewer' variable and how to add new man viewer tools.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-6-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Document 'top.children' variable in man page

Explain 'top.children' variable.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-5-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Document variables for 'report' section in man page

Explain 'report' section's variables:

'percent-limit', 'queue-size' and 'children'.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-4-git-send-email-treeze.taeung@gmail.com
[ Fix some grammar issues, add some more info ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Document variables for 'call-graph' section in man page

Explain 'call-graph' section and its variables:

'record-mode', 'dump-size', 'print-type', 'order', 'sort-key',
'threshold' and 'print-limit'.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Document 'ui.show-headers' variable in man page

This option controls display of column headers (like 'Overhead' and
'Symbol') in 'report' and 'top'. If this option is false, they are
hidden. This option is only applied to TUI.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build tests: Move the feature related vars to the front of the make cmdline

So that we do less visual searching on the 'make build-test' output to
see the feature related variables:

After:

  $ make -C tools/perf build-test
  <SNIP>
           make_no_newt_O: cd . && make NO_NEWT=1 FEATURES_DUMP=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP O=/tmp/tmp.dz55IX DESTDIR=/tmp/tmp.X29xxo
              make_tags_O: cd . && make tags FEATURES_DUMP=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP O=/tmp/tmp.6ecLh8 DESTDIR=/tmp/tmp.6vIla578Ho
  make_util_pmu_bison_o_O: cd . && make util/pmu-bison.o FEATURES_DUMP=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP O=/tmp/tmp.SVPM2G DESTDIR=/tmp/tmp.C0oAam

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dx4krgzqa566v1pedrbrcchi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build tests: Elide "-f Makefile" from make invokation

Since this is the name that 'make' will look for if no explicit -f file
is passed.

This in turn makes the output of 'build-test' more compact:

Before:

  $ perf stat make -C tools/perf build-test
  <SNIP>
  cd . && make FEATURE_DUMP_COPY=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP feature-dump
          make_no_libaudit_O: cd . && make -f Makefile  O=/tmp/tmp.tHIa0Kkk2Y DESTDIR=/tmp/tmp.foK7rckkVi NO_LIBAUDIT=1 FEATURES_DUMP=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP
  <SNIP>

After:

  $ perf stat make -C tools/perf build-test
  <SNIP>
          make_no_libaudit_O: cd . && make  O=/tmp/tmp.tHIa0Kkk2Y DESTDIR=/tmp/tmp.foK7rckkVi NO_LIBAUDIT=1 FEATURES_DUMP=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP
  <SNIP>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-m440lb8dkfsywsyah0htif6t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

- Add 'L' hotkey to dynamicly set the percent threshold for histogram
   entries and callchains, i.e. dynamicly do what the --percent-limit
   command line option to 'top' and 'report' does. (Namhyung Kim)

Infrastructure changes:

- Per hists field and sort lists, that will be used, for instance,
   in the c2c tool (Jiri Olsa)

Documentation changes:

- Update documentation of --sort and --perf-limit options
   for 'perf report' (Namhyung Kim)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'perf/urgent' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo-2' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fix from Arnaldo Carvalho de Melo:

- Fix 'perf stat' interval output values (Jiri Olsa)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

- tracepoint_error() can receive e=NULL, robustify it, fixes a problem noticed
   with a very specific combination: Machine with Intel PT (e.g. Broadwell),
   kernel with no perf_event_attr.context_switch feature (e.g. 4.2) and unreadable
   tracefs (for instance !root users), making the fallback from
   perf_event_attr.context_switch to the sched:sched_switch tracepoint to fail
   reading its info from tracefs, fix it. (Adrian Hunter)

- Fix segfault in intel PT, by making it follow the 'struct thread' lifetime cycle
   checking expectations, noticed for instance, when processing perf.data files with
   Intel PT data using 'perf script' and when exiting 'perf report' (Adrian Hunter)

- Fix CFI usage from .eh_frame and .debug_frame, which sometimes requires that we
   fallback from .eh_frame to .debug_frame in architectures such as PowerPC (Hemant Kumar)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf stat: Fix interval output values

We broke interval data displays with commit:

  3f416f22d1e2 ("perf stat: Do not clean event's private stats")

This commit removed stats cleaning, which is important for '-r' option
to carry counters data over the whole run. But it's necessary to clean
it for interval mode, otherwise the displayed value is avg of all
previous values.

Before:
  $ perf stat -e cycles -a -I 1000 record
  #           time             counts unit events
       1.000240796         75,216,287      cycles
       2.000512791        107,823,524      cycles

  $ perf stat report
  #           time             counts unit events
       1.000240796         75,216,287      cycles
       2.000512791         91,519,906      cycles

Now:
  $ perf stat report
  #           time             counts unit events
       1.000240796         75,216,287      cycles
       2.000512791        107,823,524      cycles

Notice the second value being bigger (91,.. < 107,..).

This could be easily verified by using perf script which displays raw
stat data:

  $ perf script
  CPU  THREAD       VAL         ENA         RUN        TIME EVENT
    0      -1  23855779  1000209530  1000209530  1000240796 cycles
    1      -1  33340397  1000224964  1000224964  1000240796 cycles
    2      -1  15835415  1000226695  1000226695  1000240796 cycles
    3      -1   2184696  1000228245  1000228245  1000240796 cycles
    0      -1  97014312  2000514533  2000514533  2000512791 cycles
    1      -1  46121497  2000543795  2000543795  2000512791 cycles
    2      -1  32269530  2000543566  2000543566  2000512791 cycles
    3      -1   7634472  2000544108  2000544108  2000512791 cycles

The sum of the first 4 values is the first interval aggregated value:

  23855779 + 33340397 + 15835415 + 2184696 = 75,216,287

The sum of the second 4 values minus first value is the second interval
aggregated value:

  97014312 + 46121497 + 32269530 + 7634472 - 75216287 = 107,823,524

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1454485436-20639-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
"18 fixes"

[ The 18 fixes turned into 17 commits, because one of the fixes was a
  fix for another patch in the series that I just folded in by editing
  the patch manually - hopefully correctly     - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix memory leak in copy_huge_pmd()
  drivers/hwspinlock: fix race between radix tree insertion and lookup
  radix-tree: fix race in gang lookup
  mm/vmpressure.c: fix subtree pressure detection
  mm: polish virtual memory accounting
  mm: warn about VmData over RLIMIT_DATA
  Documentation: cgroup-v2: add memory.stat::sock description
  mm: memcontrol: drop superfluous entry in the per-memcg stats array
  drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
  proc: revert /proc/<pid>/maps [stack:TID] annotation
  numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390
  MAINTAINERS: update Seth email
  ocfs2/cluster: fix memory leak in o2hb_region_release
  lib/test-string_helpers.c: fix and improve string_get_size() tests
  thp: limit number of object to scan on deferred_split_scan()
  thp: change deferred_split_count() to return number of THP in queue
  thp: make split_queue per-node

Merge tag 'for-linus-4.5-2' of git://git.code.sf.net/p/openipmi/linux-ipmi

Pull IPMI fix from Corey Minyard:
"Fix a compile error on IPMI when ACPI is disabled"

* tag 'for-linus-4.5-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: put acpi.h with the other headers

Merge tag 'devicetree-fixes-for-4.5' of git://git./linux/kernel/git/robh/linux

Pull DeviceTree fixes from Rob Herring:

- Fix build error with *_OF_DECLARE() when used in modules

- Add missing platform maintainers for dts files in MAINTAINERS

* tag 'devicetree-fixes-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: drop symbols declared by _OF_DECLARE() from modules
MAINTAINERS: Add missing platform maintainers for dts files

Merge tag 'nfs-for-4.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfix and cleanup from Trond Myklebust:
"Bugfix:
   - pNFS: Fix for missing layoutreturn calls

  Cleanup:
   - pNFS: rename NFS_LAYOUT_RETURN_BEFORE_CLOSE for code clarity"

* tag 'nfs-for-4.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Cleanup - rename NFS_LAYOUT_RETURN_BEFORE_CLOSE
  pNFS: Fix missing layoutreturn calls

Merge tag 'trace-v4.5-rc1-2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
"A cleanup to the stack tracer broke stack tracing on s390.  Here's a
  simple fix to correct that issue"

* tag 'trace-v4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/stacktrace: Show entire trace if passed in function not found

mm: retire GUP WARN_ON_ONCE that outlived its usefulness

Trinity is now hitting the WARN_ON_ONCE we added in v3.15 commit
cda540ace6a1 ("mm: get_user_pages(write,force) refuse to COW in shared
areas"). The warning has served its purpose, nobody was harmed by that
change, so just remove the warning to generate less noise from Trinity.

Which reminds me of the comment I wrongly left behind with that commit
(but was spotted at the time by Kirill), which has since moved into a
separate function, and become even more obscure: delete it.

Reported-by: Dave Jones <davej@codemonkey.org.uk>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipmi: put acpi.h with the other headers

Enclosing '#include <linux/acpi.h>' within '#ifdef CONFIG_ACPI' is
unnecessary, since it has its own conditional compile for CONFIG_ACPI.

Commit 0fbcf4af7c83 ("ipmi: Convert the IPMI SI ACPI handling to a
platform device") exposed this as a problem for platforms that do not
support ACPI when it introduced a call to ACPI_PTR() macro outside of
the CONFIG_ACPI conditional compile. This would have been perfectly
acceptable if acpi.h were not conditionally excluded for the non-acpi
platform, because the conditional compile within acpi.h defines
ACPI_PTR() to return NULL when compiled for non acpi platforms.

Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Fixed commit reference in header to conform to standard.

Signed-off-by: Corey Minyard <cminyard@mvista.com>

mm: fix memory leak in copy_huge_pmd()

We allocate a pgtable but do not attach it to anything if the PMD is in
a DAX VMA, causing it to leak.

We certainly try to not free pgtables associated with the huge zero page
if the zero page is in a DAX VMA, so I think this is the right solution.
This needs to be properly audited.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/hwspinlock: fix race between radix tree insertion and lookup

of_hwspin_lock_get_id() is protected by the RCU lock, which means that
insertions can occur simultaneously with the lookup. If the radix tree
transitions from a height of 0, we can see a slot with the indirect_ptr
bit set, which will cause us to at least read random memory, and could
cause other havoc.

Fix this by using the newly introduced radix_tree_iter_retry().

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: fix race in gang lookup

If the indirect_ptr bit is set on a slot, that indicates we need to redo
the lookup. Introduce a new function radix_tree_iter_retry() which
forces the loop to retry the lookup by setting 'slot' to NULL and
turning the iterator back to point at the problematic entry.

This is a pretty rare problem to hit at the moment; the lookup has to
race with a grow of the radix tree from a height of 0. The consequences
of hitting this race are that gang lookup could return a pointer to a
radix_tree_node instead of a pointer to whatever the user had inserted
in the tree.

Fixes: cebbd29e1c2f ("radix-tree: rewrite gang lookup using iterator")
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmpressure.c: fix subtree pressure detection

When vmpressure is called for the entire subtree under pressure we
mistakenly use vmpressure->scanned instead of vmpressure->tree_scanned
when checking if vmpressure work is to be scheduled. This results in
suppressing all vmpressure events in the legacy cgroup hierarchy. Fix it.

Fixes: 8e8ae645249b ("mm: memcontrol: hook up vmpressure to socket pressure")
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: polish virtual memory accounting

* add VM_STACK as alias for VM_GROWSUP/DOWN depending on architecture
* always account VMAs with flag VM_STACK as stack (as it was before)
* cleanup classifying helpers
* update comments and documentation

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: warn about VmData over RLIMIT_DATA

This patch provides a way of working around a slight regression
introduced by commit 84638335900f ("mm: rework virtual memory
accounting").

Before that commit RLIMIT_DATA have control only over size of the brk
region.  But that change have caused problems with all existing versions
of valgrind, because it set RLIMIT_DATA to zero.

This patch fixes rlimit check (limit actually in bytes, not pages) and
by default turns it into warning which prints at first VmData misuse:

  "mmap: top (795): VmData 516096 exceed data ulimit 512000.  Will be forbidden soon."

Behavior is controlled by boot param ignore_rlimit_data=y/n and by sysfs
/sys/module/kernel/parameters/ignore_rlimit_data.  For now it set to "y".

[akpm@linux-foundation.org: tweak kernel-parameters.txt text[
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Link: http://lkml.kernel.org/r/20151228211015.GL2194@uranus
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kees Cook <keescook@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation: cgroup-v2: add memory.stat::sock description

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: drop superfluous entry in the per-memcg stats array

MEM_CGROUP_STAT_NSTATS is just a delimiter for cgroup1 statistics, not
an actual array entry. Reuse it for the first cgroup2 stat entry, like
in the event array.

Fixes: b2807f07f4f8 ("mm: memcontrol: add "sock" to cgroup2 memory.stat")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration

Reduced testcase:

    #include <fcntl.h>
    #include <unistd.h>
    #include <sys/mman.h>
    #include <numaif.h>

    #define SIZE 0x2000

    int main()
    {
        int fd;
        void *p;

        fd = open("/dev/sg0", O_RDWR);
        p = mmap(NULL, SIZE, PROT_EXEC, MAP_PRIVATE | MAP_LOCKED, fd, 0);
        mbind(p, SIZE, 0, NULL, 0, MPOL_MF_MOVE);
        return 0;
    }

We shouldn't try to migrate pages in sg VMA as we don't have a way to
update Sg_scatter_hold::pages accordingly from mm core.

Let's mark the VMA as VM_IO to indicate to mm core that the VMA is not
migratable.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Shiraz Hashim <shashim@codeaurora.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: revert /proc/<pid>/maps [stack:TID] annotation

Commit b76437579d13 ("procfs: mark thread stack correctly in
proc/<pid>/maps") added [stack:TID] annotation to /proc/<pid>/maps.

Finding the task of a stack VMA requires walking the entire thread list,
turning this into quadratic behavior: a thousand threads means a
thousand stacks, so the rendering of /proc/<pid>/maps needs to look at a
million combinations.

The cost is not in proportion to the usefulness as described in the
patch.

Drop the [stack:TID] annotation to make /proc/<pid>/maps (and
/proc/<pid>/numa_maps) usable again for higher thread counts.

The [stack] annotation inside /proc/<pid>/task/<tid>/maps is retained, as
identifying the stack VMA there is an O(1) operation.

Siddesh said:
"The end users needed a way to identify thread stacks programmatically and
  there wasn't a way to do that.  I'm afraid I no longer remember (or have
  access to the resources that would aid my memory since I changed
  employers) the details of their requirement.  However, I did do this on my
  own time because I thought it was an interesting project for me and nobody
  really gave any feedback then as to its utility, so as far as I am
  concerned you could roll back the main thread maps information since the
  information is available in the thread-specific files"

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390

When working with hugetlbfs ptes (which are actually pmds) is not valid to
directly use pte functions like pte_present() because the hardware bit
layout of pmds and ptes can be different.  This is the case on s390.
Therefore we have to convert the hugetlbfs ptes first into a valid pte
encoding with huge_ptep_get().

Currently the /proc/<pid>/numa_maps code uses hugetlbfs ptes without
huge_ptep_get().  On s390 this leads to the following two problems:

1) The pte_present() function returns false (instead of true) for
   PROT_NONE hugetlb ptes. Therefore PROT_NONE vmas are missing
   completely in the "numa_maps" output.

2) The pte_dirty() function always returns false for all hugetlb ptes.
   Therefore these pages are reported as "mapped=xxx" instead of
   "dirty=xxx".

Therefore use huge_ptep_get() to correctly convert the hugetlb ptes.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: <stable@vger.kernel.org> [4.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update Seth email

Update/unify my contact info. The old email address will no longer work
soon.

Signed-off-by: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2/cluster: fix memory leak in o2hb_region_release

o2hb_region_release currently doesn't free o2hb_debug_buf
hr_db_elapsed_time and hr_db_pinned malloced in o2hb_debug_create. Also
we should call debugfs_remove before freeing its data, to prevent the risk
accessing debugfs rightly after its data has been freed.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jiufei Xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test-string_helpers.c: fix and improve string_get_size() tests

Recently added commit 564b026fbd0d ("string_helpers: fix precision loss
for some inputs") fixed precision issues for string_get_size() and broke
tests.

Fix and improve them: test both STRING_UNITS_2 and STRING_UNITS_10 at a
time, better failure reporting, test small an huge values.

Fixes: 564b026fbd0d28e9 ("string_helpers: fix precision loss for some inputs")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: limit number of object to scan on deferred_split_scan()

If we have a lot of pages in queue to be split, deferred_split_scan()
can spend unreasonable amount of time under spinlock with disabled
interrupts.

Let's cap number of pages to split on scan by sc->nr_to_scan.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: change deferred_split_count() to return number of THP in queue

I've got meaning of shrinker::count_objects() wrong: it should return
number of potentially freeable objects, which is not necessary correlate
with freeable memory.

Returning 256 per THP in queue is not reasonable:
shrinker::scan_objects() never called with nr_to_scan > 128 in my setup.

Let's return 1 per THP and correct scan_object accordingly.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: make split_queue per-node

Andrea Arcangeli suggested to make split queue per-node to improve
scalability. Let's do it.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

perf hists browser: Add 'L' hotkey to change percent limit

Add 'L' key action to change the percent limit applied to both of hist
entries and callchains.

Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Update documention of --percent-limit option

The --percent-limit option was changed to be applied to callchains as
well as to hist entries recently, but it missed to update the doc.

Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Update documentation of --sort option

The description of the memory sort key (used by --mem-mode) was
misplaced. Move it under the --sort option so that it can be referenced
properly.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Introduce hists__for_each_sort_list macro

With the hist object having the perf_hpp_list we can now iterate sort
format entries based in the hists object. Adding
hists__for_each_sort_list macro to do that.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-27-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Introduce hists__for_each_format macro

With the hist object having the perf_hpp_list we can now iterate output
format entries based in the hists object. Adding hists__for_each_format
macro to do that.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-26-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add hpp_list into struct hists object

Adding hpp_list into struct hists object.

Initializing struct hists_evsel hists object to carry global
perf_hpp_list list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-25-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Add struct perf_hpp_list argument to helper functions

Adding struct perf_hpp_list argument to following helper functions:

  void perf_hpp__setup_output_field(struct perf_hpp_list *list);
  void perf_hpp__reset_output_field(struct perf_hpp_list *list);
  void perf_hpp__append_sort_keys(struct perf_hpp_list *list);

so they could be used on hists's hpp_list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-24-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Introduce perf_hpp_list__for_each_sort_list_safe macro

Introducing perf_hpp_list__for_each_sort_list_safe macro
to iterate perf_hpp_list object's sort entries safely.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-23-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Introduce perf_hpp_list__for_each_sort_list macro

Introducing perf_hpp_list__for_each_sort_list macro to iterate
perf_hpp_list object's sort entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-22-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Introduce perf_hpp_list__for_each_format_safe macro

Introducing perf_hpp_list__for_each_format_safe macro to iterate
perf_hpp_list object's output entries safely.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-21-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Introduce perf_hpp_list__for_each_format macro

Introducing perf_hpp_list__for_each_format macro to iterate
perf_hpp_list object's output entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-20-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Pass perf_hpp_list all the way through setup_output_list

Passing perf_hpp_list all the way through setup_output_list so the
output entry could be added on the arbitrary list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-19-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Add perf_hpp_list register helpers

Adding 2 perf_hpp_list register helpers:

  perf_hpp_list__column_register()
  perf_hpp_list__register_sort_field()

to be called within existing helpers:

  perf_hpp__column_register()
  perf_hpp__register_sort_field()

to register format entries within global perf_hpp_list object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-17-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Introduce perf_hpp_list__init function

Introducing perf_hpp_list__init function to have an easy way to
initialize perf_hpp_list struct.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Introduce struct perf_hpp_list

Gather output and sort lists under struct perf_hpp_list, so we could
have multiple instancies of sort/output format entries.

Replacing current perf_hpp__list and perf_hpp__sort_list lists with
single perf_hpp_list instance.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-15-git-send-email-jolsa@kernel.org
[ Renamed fields to .{fields,sorts} as suggested by Namhyung and acked by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Separate output fields parsing into setup_output_list function

Separating output fields parsing into setup_output_list function, so
it's separated from field_order string setup and could be reused later
in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Separate sort fields parsing into setup_sort_list function

Separating sort fields parsing into setup_sort_list function, so it's
separated from sort_order string setup and could be reused later in
following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Properly release format fields

With multiple list holding format entries, we need the support properly
releasing format output/sort fields.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Remove perf_hpp__column_(disable|enable)

Those functions are no longer needed. They operate over perf_hpp__format
array which is now used only as template for dynamic entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Allocate output sort field

Currently we use static output fields, because we have single global
list of all sort/output fields.

We will add hists specific sort and output lists in following patches,
so we need all format entries to be dynamically allocated. Adding
support to allocate output sort field.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Move UI initialization ahead of sort setup

The ui initialization changes hpp format callbacks, based on the used
browser. Thus we need this init being processed before setup_sorting.

Replica of a patch by Jiri for 'perf report'.

Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Move UI initialization ahead of sort setup

The ui initialization changes hpp format callbacks, based on the used
browser. Thus we need this init being processed before setup_sorting.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Make hpp setup function generic

Now that we have the 'equal' method implemented for hpp format entries
we can ease up the logic in the following functions and make them
generic wrt comparing format entries:

perf_hpp__setup_output_field
perf_hpp__append_sort_keys

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Add 'hpp__equal' callback function

Adding 'hpp__equal' callback function to compare hpp output format
entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Add 'equal' method to perf_hpp_fmt struct

To easily compare format entries and make it available for all kinds of
format entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Use struct perf_hpp_fmt::idx in perf_hpp__reset_width

We are going to add dynamic hpp format fields, so we need to make the
'len' change for the format itself, not in the perf_hpp__format
template.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Add _idx fields into struct perf_hpp_fmt

Currently there's no way of comparing hpp format entries, which is
needed in following patches.

Adding _idx fields into struct perf_hpp_fmt to recognize and be able to
compare hpp format entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Introduce perf_evsel__output_resort function

Adding evsel specific function to sort hists_evsel based hists. The
hists__output_resort can be now used to sort common hists object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Factor output_resort from hists__output_resort

Currently hists__output_resort() depends on hists based on hists_evsel
struct, but we need to be able to sort common hists as well.

Cutting out the sorting base sorting code into output_resort
function, so it can be reused in following patch.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-3' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core callchain fixes and improvements from Arnaldo Carvalho de Melo <acme@redhat.com:

User visible changes:

- Make --percent-limit apply to callchains also and fix some bugs
related to --percent-limit (Namhyung Kim)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo-2' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf tooling changes from Arnaldo Carvalho de Melo:

New features:

- Port 'perf kvm stat' to PowerPC (Hemant Kumar)

Infrastructure changes:

- Use the 'feature-dump' target to do the feature checks just once and then
   add code to reuse that in the tests/make makefile, speeding up the
   'make -C tools/perf build-test' target (Wang Nan)

- Reduce the number of tests the 'build-test' target do to those that don't
   pollute the source tree (Arnaldo Carvalho de Melo)

- Improve the output of the build tests a bit by aligning the name of the
   tests, more can be done to filter out uninteresting info in the output
   (Arnaldo Carvalho de Melo)

- Add perf_evlist pointer to *info_priv_size(), more prep work for
   supporting the coresight architecture (Mathieu Poirier)

- Improve the 'perf test bp_signal' test (Wang Nan)

- Check environment before starting the BPF 'perf test', so that we can just
   'Skip' older kernels instead of 'FAIL'ing them (Wang Nan)

- Fix cpumode of synthesized buildid event (Wang Nan)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Rename the "colors.code" ~/.perfconfig variable to "colors.jump_arrows",
   as it controls just the that UI element in the annotate browser (Taeung Song)

- Avoid trying to read ELF symtabs from device files, noticed while doing
   memory profiling work (Jiri Olsa)

- Improve context detection when offering options in the hists browser,
   i.e.  some options don't make sense when the browser is not working with
   a perf.data file ('perf top' mode), only in 'perf report' mode, like
   scripting (Namhyung Kim)

Infrastructure changes:

- Elliminate duplication in the hists browser filter functions, getting the
   common part into a function that receives callbacks for filtering by
   DSO, thread, etc. (Namhyung Kim)

- Fix misleadingly indented assignment, found using
   gcc6 -Wmisleading-indentation (Markus Trippelsdorf)

- Handle LLVM relocation oddities in libbpf, introducing a 'perf test' that
   detects such problems and then fixing the problem, so that the test now
   passes (Wang Nan)

- More improvements to the build infrastructure to allow reusing the
   feature detection facilities (Wang Nan)

- Auto initialize the globals needed by cpu__max_{cpu,node}() routines
   (Arnaldo Carvalho de Melo)

Documentation changes:

- Document the perf sysctls in Documentation/sysctl/kernel.txt (Ben Hutchings)

- Document a bunch more ~/.perfconfig knobs (Taeung Song)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/cpu: Convert printk(KERN_<LEVEL> ...) to pr_<level>(...)

- Use the more current logging style pr_<level>(...) instead of the old
printk(KERN_<LEVEL> ...).

- Convert pr_warning() to pr_warn().

Signed-off-by: Chen Yucong <slaoub@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454384702-21707-1-git-send-email-slaoub@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf probe: Search both .eh_frame and .debug_frame sections for probe location

'perf probe' through debuginfo__find_probes() in util/probe-finder.c
checks for the functions' frame descriptions in either .eh_frame section
of an ELF or the .debug_frame.

The check is based on whether either one of these sections is present.
Depending on distro, toolchain defaults, architetcutre, build flags,
etc., CFI might be found in either .eh_frame and/or .debug_frame.
Sometimes, it may happen that, .eh_frame, even if present, may not be
complete and may miss some descriptions.

Therefore, to be sure, to find the CFI covering an address we will
always have to investigate both if available.

For e.g., in powerpc, this may happen:
  $ gcc -g bin.c -o bin

  $ objdump --dwarf ./bin
  <1><145>: Abbrev Number: 7 (DW_TAG_subprogram)
     <146> DW_AT_external   : 1
     <146> DW_AT_name       : (indirect string, offset: 0x9e): main
     <14a> DW_AT_decl_file  : 1
     <14b> DW_AT_decl_line  : 39
     <14c> DW_AT_prototyped : 1
     <14c> DW_AT_type       : <0x57>
     <150> DW_AT_low_pc     : 0x100007b8

If the .eh_frame and .debug_frame are checked for the same binary, we
will find that, .eh_frame (although present) doesn't contain a
description for "main" function.

But, .debug_frame has a description:

  000000d8 00000024 00000000 FDE cie=00000000 pc=100007b8..10000838
    DW_CFA_advance_loc: 16 to 100007c8
    DW_CFA_def_cfa_offset: 144
    DW_CFA_offset_extended_sf: r65 at cfa+16
  ...

Due to this (since, perf checks whether .eh_frame is present and goes on
searching for that address inside that frame), perf is unable to process
the probes:

  # perf probe -x ./bin main
    Failed to get call frame on 0x100007b8
    Error: Failed to add events.

To avoid this issue, we need to check both the sections (.eh_frame and
.debug_frame), which is done in this patch.

Note that, we can always force everything into both .eh_frame and
.debug_frame by:

  $ gcc bin.c -fasynchronous-unwind-tables  -fno-dwarf2-cfi-asm -g -o bin

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1454426806-13974-1-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix thread lifetime related segfaut in intel_pt

intel_pt_process_auxtrace_info() creates a pt->unknown_thread thread
that eventually needs to be freed by the last thread__put() on it, when
its refcount hits zero, which may happen in
intel_pt_process_auxtrace_info() error handling path and triggers the
following segfault, which would happen as well at intel_pt_free, when
tools using this intel_pt codebase frees up resources:

  # perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
  0  a  anaconda-ks.cfg  bin   perf.data perf.data.old  perf-f23-bringup.todo
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.217 MB perf.data ]
  #
  # perf script -F event,comm,pid,tid,time,addr,ip,sym,dso,iregs
  Samples for 'instructions:u' event do not have IREGS attribute set. Cannot print 'iregs' field.
  intel_pt_synth_events: failed to synthesize 'instructions' event type
  Segmentation fault (core dumped)
  #

The problem is: there's a union in 'struct thread' combines a list_head
and a rb_node. The standard life cycle of a thread is: init rb_node in
the constructor, insert it into machine->threads rbtree using rb_node,
move it to machine->dead_threads using list_head, clean in the last
thread__put: list_del_init(&thread->node).

In the above command, it clean a thread before adding it into list,
causes the above segfault.

Since pt->unknown_thread will never live in an rbtree, initialize its
list node so that when list_del_init() is done on it we don't segfault.

After this patch:

  # perf script -F event,comm,pid,tid,time,addr,ip,sym,dso,iregs
  Samples for 'instructions:u' event do not have IREGS attribute set. Cannot print 'iregs' field.
  intel_pt_synth_events: failed to synthesize 'instructions' event type
  0x248 [0x88]: failed to process type: 70
  #

Reported-by: Tong Zhang <ztong@vt.edu>
Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: http://lkml.kernel.org/r/1454296865-19749-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
"This looks like a lot but it's a mixture of regression fixes as well
  as fixes for longer standing issues.

   1) Fix on-channel cancellation in mac80211, from Johannes Berg.

   2) Handle CHECKSUM_COMPLETE properly in xt_TCPMSS netfilter xtables
      module, from Eric Dumazet.

   3) Avoid infinite loop in UDP SO_REUSEPORT logic, also from Eric
      Dumazet.

   4) Avoid a NULL deref if we try to set SO_REUSEPORT after a socket is
      bound, from Craig Gallek.

   5) GRO key comparisons don't take lightweight tunnels into account,
      from Jesse Gross.

   6) Fix struct pid leak via SCM credentials in AF_UNIX, from Eric
      Dumazet.

   7) We need to set the rtnl_link_ops of ipv6 SIT tunnels before we
      register them, otherwise the NEWLINK netlink message is missing
      the proper attributes.  From Thadeu Lima de Souza Cascardo.

   8) Several Spectrum chip bug fixes for mlxsw switch driver, from Ido
      Schimmel

   9) Handle fragments properly in ipv4 easly socket demux, from Eric
      Dumazet.

  10) Don't ignore the ifindex key specifier on ipv6 output route
      lookups, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (128 commits)
  tcp: avoid cwnd undo after receiving ECN
  irda: fix a potential use-after-free in ircomm_param_request
  net: tg3: avoid uninitialized variable warning
  net: nb8800: avoid uninitialized variable warning
  net: vxge: avoid unused function warnings
  net: bgmac: clarify CONFIG_BCMA dependency
  net: hp100: remove unnecessary #ifdefs
  net: davinci_cpdma: use dma_addr_t for DMA address
  ipv6/udp: use sticky pktinfo egress ifindex on connect()
  ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()
  netlink: not trim skb for mmaped socket when dump
  vxlan: fix a out of bounds access in __vxlan_find_mac
  net: dsa: mv88e6xxx: fix port VLAN maps
  fib_trie: Fix shift by 32 in fib_table_lookup
  net: moxart: use correct accessors for DMA memory
  ipv4: ipconfig: avoid unused ic_proto_used symbol
  bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout.
  bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter.
  bnxt_en: Ring free response from close path should use completion ring
  net_sched: drr: check for NULL pointer in drr_dequeue
  ...

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"This fixes the following issues:

  API:
   - algif_hash needs to wait for init operations to complete.
   - The has_key setting for shash was always true.

  Algorithms:
   - Add missing selections of CRYPTO_HASH.
   - Fix pkcs7 authentication.

  Drivers:
   - Fix stack alignment bug in chacha20-ssse3.
   - Fix performance regression in caam due to incorrect setting.
   - Fix potential compile-only build failure of stm32"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: atmel-aes - remove calls of clk_prepare() from atomic contexts
  crypto: algif_hash - wait for crypto_ahash_init() to complete
  crypto: shash - Fix has_key setting
  hwrng: stm32 - Fix dependencies for !HAS_IOMEM archs
  crypto: ghash,poly1305 - select CRYPTO_HASH where needed
  crypto: chacha20-ssse3 - Align stack pointer to 64 bytes
  PKCS#7: Don't require SpcSpOpusInfo in Authenticode pkcs7 signatures
  crypto: caam - make write transactions bufferable on PPC platforms

Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
"1/ Fixes to the libnvdimm 'pfn' device that establishes a reserved
     area for storing a struct page array.

  2/ Fixes for dax operations on a raw block device to prevent pagecache
     collisions with dax mappings.

  3/ A fix for pfn_t usage in vm_insert_mixed that lead to a null
     pointer de-reference.

  These have received build success notification from the kbuild robot
  across 153 configs and pass the latest ndctl tests"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  phys_to_pfn_t: use phys_addr_t
  mm: fix pfn_t to page conversion in vm_insert_mixed
  block: use DAX for partition table reads
  block: revert runtime dax control of the raw block device
  fs, block: force direct-I/O for dax-enabled block devices
  devm_memremap_pages: fix vmem_altmap lifetime + alignment handling
  libnvdimm, pfn: fix restoring memmap location
  libnvdimm: fix mode determination for e820 devices

perf report: Don't show blank lines if entry has no callchain

When all callchains of a hist entry is percent-limited, do not add a
blank line at the end. It makes the entry look like it doesn't have
callchains.

Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160128122454.GA27446@danjae.kornet
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Fix percent display in callchains

When there's only a single callchain, perf doesn't print its percentage
in front of the symbols.  This is because it assumes that the percentage
is same as parents.  But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown.  In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.

For example, let's see the following callchain.

  $ perf report --no-children --percent-limit 0.01 --tui
  ...
  -    0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - 0.04% mmap_region
             do_mmap_pgoff
           - vm_mmap_pgoff
              + 0.02% sys_mmap_pgoff
              + 0.02% vm_mmap
           + 0.02% mprotect_fixup

Current code omits the percent if 'mmap_region' becomes the only node
when percent limit is set to 0.03%, its percent is not 0.06% but users
will assume it incorrectly.

Before:

  $ perf report --no-children --percent-limit 0.03 --tui
  ...
     0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - mmap_region
          do_mmap_pgoff
          vm_mmap_pgoff

After:

  $ perf report --no-children --percent-limit 0.03 --tui
  ...
     0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - 0.04% mmap_region
             do_mmap_pgoff
             vm_mmap_pgoff

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Pass parent_total to callchain print functions

Pass parent node's total period to callchain print functions. This info
is needed by later patch to determine whether it can omit percent or not
correctly.

No functional change intended.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Fix dump to show correct callchain style

The commit 8c430a348699 ("perf hists browser: Support folded
callchains") missed to update hist_browser__dump() so it always shows
graph-style callchains regardless of current setting.

To fix that, factor out callchain printing code and rename the existing
function which prints graph-style callchain.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8c430a348699 ("perf hists browser: Support folded callchains")
Link: http://lkml.kernel.org/r/1453909257-26015-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Fix percent display in callchains on --stdio

When there's only a single callchain, perf doesn't print its percentage
in front of the symbols.  This is because it assumes that the percentage
is same as parents.  But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown.  In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.

For example, let's see the following callchain.

  $ perf report -s comm --percent-limit 0.01 --stdio
  ...
     9.95%  swapper
            |
            |--7.57%--intel_idle
            |          cpuidle_enter_state
            |          cpuidle_enter
            |          call_cpuidle
            |          cpu_startup_entry
            |          |
            |          |--4.89%--start_secondary
            |          |
            |           --2.68%--rest_init
            |                     start_kernel
            |                     x86_64_start_reservations
            |                     x86_64_start_kernel
    |
    |--0.15%--__schedule
    |          |
    |          |--0.13%--schedule
    |          |          schedule_preempt_disable
    |          |          cpu_startup_entry
            |          |          |
            |          |          |--0.09%--start_secondary
            |          |          |
            |          |           --0.04%--rest_init
            |          |                     start_kernel
            |          |                     x86_64_start_reservations
            |          |                     x86_64_start_kernel
            |          |
            |           --0.01%--schedule_preempt_disabled
            |                     cpu_startup_entry
  ...

Current code omits the percent if 'intel_idle' becomes the only node
when percent limit is set to 0.5%, its percent is not 9.95% but users
will assume it incorrectly.

Before:

  $ perf report --percent-limit 0.5 --stdio
  ...
     9.95%  swapper
            |
            ---intel_idle
               cpuidle_enter_state
               cpuidle_enter
               call_cpuidle
               cpu_startup_entry
               |
               |--4.89%--start_secondary
               |
                --2.68%--rest_init
                          start_kernel
                          x86_64_start_reservations
                          x86_64_start_kernel

After:

  $ perf report --percent-limit 0.5 --stdio
  ...
     9.95%  swapper
            |
             --7.57%--intel_idle
                       cpuidle_enter_state
                       cpuidle_enter
                       call_cpuidle
                       cpu_startup_entry
                       |
                       |--4.89%--start_secondary
                       |
                        --2.68%--rest_init
                                  start_kernel
                                  x86_64_start_reservations
                                  x86_64_start_kernel

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf callchain: Pass parent_samples to __callchain__fprintf_graph()

Pass hist entry's period to graph callchain print function. This info
is needed by later patch to determine whether it can omit percentage of
top-level node or not.

No functional change intended.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>