David S. Miller [Mon, 15 Aug 2016 04:09:11 +0000 (21:09 -0700)] 
Merge branch 'proc-per-ns'
Dmitry Torokhov says:
====================
Make /proc per net namespace objects belong to container
Currently [almost] all /proc objects belong to the global root, even if
data belongs to a given namespace within a container and (at least for
sysctls) we work around permssions checks to allow container's root to
access the data.
This series changes ownership of net namespace /proc objects
(/proc/net/self/* and /proc/sys/net/*) to be container's root and not
global root when there exists mapping for container's root in user
namespace.
This helps when running Android CTS in a container, but I think it makes
sense regardless.
Changes from V1:
- added fix for crash when !CONFIG_NET_NS (new patch #1)
- addressed Eric'c comments for error handling style in patch #3 and
added his Ack
- adjusted patch #2 to use the same style of erro handling
- sent out as series instead of separate patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov [Wed, 10 Aug 2016 21:36:02 +0000 (14:36 -0700)] 
net: make net namespace sysctls belong to container's owner
If net namespace is attached to a user namespace let's make container's
root owner of sysctls affecting said network namespace instead of global
root.
This also allows us to clean up net_ctl_permissions() because we do not
need to fudge permissions anymore for the container's owner since it now
owns the objects in question.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov [Wed, 10 Aug 2016 21:36:01 +0000 (14:36 -0700)]
proc: make proc entries inherit ownership from parent
There are certain parameters that belong to net namespace and that are
exported in /proc. They should be controllable by the container's owner,
but are currently owned by global root and thus not available.
Let's change proc code to inherit ownership of parent entry, and when
create per-ns "net" proc entry set it up as owned by container's owner.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov [Wed, 10 Aug 2016 21:36:00 +0000 (14:36 -0700)]
netns: do not call pernet ops for not yet set up init_net namespace
When CONFIG_NET_NS is disabled, registering pernet operations causes
init() to be called immediately with init_net as an argument. Unfortunately
this leads to some pernet ops, such as proc_net_ns_init() to be called too
early, when init_net namespace has not been fully initialized. This causes
issues when we want to change pernet ops to use more data from the net
namespace in question, for example reference user namespace that owns our
network namespace.
To fix this we could either play game of musical chairs and rearrange init
order, or we could do the same as when CONFIG_NET_NS is enabled, and
postpone calling pernet ops->init() until namespace is set up properly.
Note that we can not simply undo commit
ed160e839d2e ("[NET]: Cleanup
pernet operation without CONFIG_NET_NS") and use the same implementations
for __register_pernet_operations() and __unregister_pernet_operations(),
because many pernet ops are marked as __net_initdata and will be discarded,
which wreaks havoc on our ops lists. Here we rely on the fact that we only
use lists until init_net is fully initialized, which happens much earlier
than discarding __net_initdata sections.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 12 Aug 2016 20:29:24 +0000 (21:29 +0100)] 
net: phy: initialize rc to zero to avoid returning garbage value
In the case where phydev->interrupts is not PHY_INTERRUPT_ENABLED
function vsc85xx_ack_interrupt is returning an uninitialized
garbage value. Fix this by initializing rc to zero.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Fri, 12 Aug 2016 12:58:02 +0000 (14:58 +0200)] 
net: bfin_mac: Fix a few spelling fixes
This patch respell some word badly spelled.
- Invidate instead of Invalidate
- proble instead of probe
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 22:11:05 +0000 (15:11 -0700)]
Merge tag 'mac80211-next-for-davem-2016-08-12' of git://git./linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Not much for -next so far, but here it goes:
* send more nl80211 events for interfaces
* remove useless network/transport offset mangling code
* validate beacon intervals identically for all interface types
* use driver rate estimates for mesh
* fix a compiler type/signedness warning
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 21:53:41 +0000 (14:53 -0700)]
Merge branch 'net-urb-alloc-failure'
Wolfram Sang says:
====================
net: don't print error when allocating urb fails
This per-subsystem series is part of a tree wide cleanup. usb_alloc_urb() uses
kmalloc which already prints enough information on failure. So, let's simply
remove those "allocation failed" messages from drivers like we did already for
other -ENOMEM cases. gkh acked this approach when we talked about it at LCJ in
Tokyo a few weeks ago.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:13:08 +0000 (23:13 +0200)] 
net: wireless: realtek: rtlwifi: usb: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:13:07 +0000 (23:13 +0200)]
net: wireless: marvell: mwifiex: usb: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:13:06 +0000 (23:13 +0200)]
net: wireless: marvell: libertas_tf: if_usb: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:13:05 +0000 (23:13 +0200)]
net: wireless: intersil: orinoco: orinoco_usb: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:31 +0000 (23:05 +0200)]
net: wireless: broadcom: brcm80211: brcmfmac: usb: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:30 +0000 (23:05 +0200)]
net: wireless: ath: ar5523: ar5523: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:29 +0000 (23:05 +0200)]
net: wimax: i2400m: usb-notif: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:28 +0000 (23:05 +0200)]
net: usb: usbnet: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:27 +0000 (23:05 +0200)]
net: usb: lan78xx: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Acked-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:26 +0000 (23:05 +0200)]
net: usb: hso: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:25 +0000 (23:05 +0200)]
net: can: usb: usb_8dev: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:24 +0000 (23:05 +0200)]
net: can: usb: peak_usb: pcan_usb_core: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:23 +0000 (23:05 +0200)]
net: can: usb: kvaser_usb: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:22 +0000 (23:05 +0200)]
net: can: usb: gs_usb: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:21 +0000 (23:05 +0200)]
net: can: usb: esd_usb2: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:20 +0000 (23:05 +0200)]
net: can: usb: ems_usb: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Kosina [Fri, 12 Aug 2016 14:34:49 +0000 (16:34 +0200)] 
net: fix up a few missing hashtable.h conflict resolutions
There are a couple of leftover symbol conflicts caused by hashtable.h
being included by netdevice.h; those were not caught as build failure
(they're "only" a warning, but in fact real bugs). Fix those up.
Fixes: e87a8f24c ("net: resolve symbol conflicts with generic hashtable.h")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 19:00:49 +0000 (12:00 -0700)]
Merge branch 'thunderx-next'
Sunil Goutham says:
====================
net: thunderx: Support for newer chips and miscellaneous patches
This patch series adds support for VNIC on 81xx and 83xx SOCs.
81xx/83xx is different from 88xx in terms of capabilities and new type
of interfaces supported (eg: QSGMII, RGMII) and have DLMs instead of
QLMs which allows single BGX to have interfaces of different LMAC types.
Also included some patches which are common for all 88xx/81xx/83xx
SOCs like using netdev's name while registering irqs, reset receive
queue stats and some changes to use standard API for split buffer Rx
packets, generating RSS key e.t.c
PS: Most of the patches were submitted earlier under different series but
for some reason were not picked up by patchwork. Since new patches have been
added in the meantime, resubmitting all as a new patchset.
Changes from v1:
- Incorporated Yuval Mintz's suggestion to use generic API to set minimum
queue count i.e by using netif_get_num_default_rss_queues().
- Resolved a compilation issue reported by test robot while compiling
patch 'Add support for 16 LMACs of 83xx'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:44 +0000 (16:51 +0530)] 
net: thunderx: Don't set RX_PACKET_DIS while initializing
Setting BGXX_SPUX_MISC_CONTROL::RX_PACKET_DIS is not needed as
packet reception is anyway disabled by BGXX_CMRX_CONFIG::DATA_PKT_RX_EN.
Also setting RX_PACKET_DIS causes a bogus remote fault condition
which delays link detection.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:43 +0000 (16:51 +0530)]
net: thunderx: Use netdev_rss_key_fill() helper
Use standard API to generate a random RSS hash key
on every boot.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zyta Szpak [Fri, 12 Aug 2016 11:21:42 +0000 (16:51 +0530)] 
net: thunderx: Configure tunnelling protocol parsing
This patch enables parsing of inner layers for tunnelled packets.
Signed-off-by: Zyta Szpak <zr@semihalf.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:41 +0000 (16:51 +0530)]
net: thunderx: Use napi_consume_skb for bulk free
This patch enables bulk freeing on the Tx side.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:40 +0000 (16:51 +0530)]
net: thunderx: Don't set mac address for secondary Qset VFs
Set MAC addresses only for primary VF's and don't for
secondary VFs.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jerin Jacob [Fri, 12 Aug 2016 11:21:39 +0000 (16:51 +0530)] 
net: thunderx: Reset RXQ HW stats when interface is brought down
When SQ/TXQ is reclaimed i.e reset it's stats also automatically reset
by HW. This is not the case with RQ. Also VF doesn't have write access
to statistics counter registers. Hence a new Mbox msg is introduced which
supports resetting RQ, SQ and full Qset stats. Currently only RQ stats
are being reset using this mbox message.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Radoslaw Biernacki [Fri, 12 Aug 2016 11:21:38 +0000 (16:51 +0530)] 
net: thunderx: Improvement for MBX interface debug messages
Adding debug messages in case of NACK for a mailbox message, also
did small cleanups.
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:37 +0000 (16:51 +0530)]
net: thunderx: Use skb_add_rx_frag() for split buffer Rx pkts
Instead of a round about way of converting buffers to SKBs and
combining them into a frag list, use standard skb_add_rx_frag()
API to merge page fragments. This code is useful when incoming
packets are of size more than RCV_FRAG_LEN which is currently
set to 2048bytes.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:36 +0000 (16:51 +0530)]
net: thunderx: Use netdev's name for naming VF's interrupts
This patch changes the way VF's irqs are visible in /proc/interrupts.
Instead of VF id, logical interface's netdev name is used for IRQ
naming and also all secondary VF's interrupts in multiqset config
use primary VF's netdev name.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:35 +0000 (16:51 +0530)]
net: thunderx: Support for 83xx mixed QLM/DLM config
83xx has 4 BGX blocks and are enabled mixed QLM/DLM
configs. BGX0/BGX1 are from QLM2/QLM3, BGX3 is DLM4
and BGX2 is split across DLM5 & DLM6.
This patch adds support for BGX2's split config and also
enables all 4 BGXs to be used.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:34 +0000 (16:51 +0530)]
net: thunderx: Add support for 16 LMACs of 83xx
83xx will have 4 BGX blocks i.e 16 LMACs, to avoid changing
the same with every platform, nicpf struct elements which
track LMAC related info are now allocated runtime based
on platform's max possible BGX count.
Also fixed configuring min packet size for all LMAC's
supported on a platform.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:33 +0000 (16:51 +0530)]
net: thunderx: Add RGMII interface type support
This patch adds RGX/RGMII interface type support to BGX
driver. This type of interface is supported by 81xx SOC.
CN81XX VNIC has 8 VFs and max possible LMAC interfaces are 9,
hence RGMII interface will not work if all DLMs are in BGX mode
and all 8 LMACs are enabled
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:32 +0000 (16:51 +0530)]
net: thunderx: Add QSGMII interface type support
This patch adds support for QSGMII interface type to
the BGX driver. This type of interface is supported by
81xx SOC.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:31 +0000 (16:51 +0530)]
net: thunderx: Add 81xx support to BGX driver
This patch adds support for BGX module on 81xx where a BGX
can be split and have different LMACs configured in
different modes.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:30 +0000 (16:51 +0530)]
net: thunderx: Support for different LMAC types within BGX
On 88xx all LMACs in a BGX will be in same mode but on 81xx
BGX can be split as two and there can be LMACs configured in
different modes.
These changes move lmac_type, lane2serdes fields into per lmac
struct from BGX struct. Got rid of qlm_mode field which has become
redundant with these changes. And now no of valid LMACs is read
from CSRs configured by low level firmware and figuring out the
same based on QLM mode is discarded
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:29 +0000 (16:51 +0530)]
net: thunderx: Enable mailbox interrupts on 81xx/83xx
88xx has 128 VFs, 81xx has 8 VFs and 83xx will have 32VFs.
Made changes to PF driver such that mailbox interrupt enable
registers are configuired based on number of VFs HW supports.
Also cleanedup mailbox irq handler registration code.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:28 +0000 (16:51 +0530)]
net: thunderx: Enable CQE_RX desc's extension fields
Unlike 88xx, CQE_RX descriptor's tunnelling extension i.e CQE_RX2_S
is always enabled on 81xx/83xx and HW does insert these fields into
CQE_RX. As a result receive buffer addresses will now be present at
7th word of CQE_RX instead of 6th.
Enable CQE_RX2_S on 88xx pass 2.x as well.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:27 +0000 (16:51 +0530)]
net: thunderx: Set queue count based on number of CPUs
81xx has only 4 CPUs, so it doesn't make sense to initialize
entire Qset i.e 8 queues by default. Made changes to queue
initialization to init queues equal to number of CPUs or
8 queues whichever is lesser. Also this will be applicable to
VMs with VNIC VF attached and having less VCPUs
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:26 +0000 (16:51 +0530)]
net: thunderx: Add support for 81xx and 83xx chips
This patch adds info on HW maximums of 81xx/83xx and also
configures receive and transmit datapaths accordingly.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:25 +0000 (16:51 +0530)]
net: thunderx: Add VNIC's PCI devid on future chips
This patch adds PCI device IDs of VNIC on newer chips and also
registers VF driver with them. Device id remains same for all
versions of chips but subsystem device id changes.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:24 +0000 (16:51 +0530)]
net: thunderx: Moved HW capability info from macros to structure
Current driver has most of the HW maximums info like no of channels,
traffic limiters, RSS indices e.t.c in the form of macros. These have
been moved into a 'hw_info' structure so that support for VNIC on
newer chips with different set of HW maximums can be added.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 18:48:54 +0000 (11:48 -0700)]
Merge branch 'xgene-next'
Iyappan Subramanian says:
====================
Fix warning and issues
This patch set fixes the following warning and issues,
1. Fix compiler warnings
- drivers: net: xgene: Fix compiler warnings
2. unmap DMA memory on xgene_Enet_delete_bufpoool()
- drivers: net: xgene: fix: Add dma_unmap_single
3. Delete descriptor rings and buffer pools on error
- drivers: net: xgene: fix: Delete descriptor rings and buffer pools
4. Fix error desconstruction on probe()
- drivers: net: xgene: Fix error deconstruction path
5. Fix RSS indirection table fields
- drivers: net: xgene: Fix RSS indirection table fields
6. Change the port init sequence as per hardware specification
- drivers: net: xgene: Change port init sequence
7. Fix link not recovered after link is down issue
- drivers: net: xgene: XFI PCS reset when link is down
8. Fix link up is reported when no SFP+ module is plugged in issue
- drivers: net: xgene: Poll link status via GPIO
- dtb: xgene: Add rxlos-gpios property
- Documentation: dtb: xgene: Add rxlos GPIO mapping
9. Fix backward compatibility when used with older driver
- drivers: net: xgene: Fix backward compatibility
- dtb: xgene: Fix backward compatibility
v2: Address review comments from v1
- Fixed compiler warnings
- Removed kbuild fix patch, since Arnd submitted the same
- Changed Kconfig to select GPIOLIB (to fix kbuild warning)
- Added rxlos-gpio documentation
- Fixed backward compatibility with older driver
v1:
- Initial version
====================
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:48 +0000 (22:05 -0700)] 
dtb: xgene: Fix backward compatibility
This patch fixes the backward compatibility when used with older kernel.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:47 +0000 (22:05 -0700)]
drivers: net: xgene: Fix backward compatibility
This patch fixes the backward compatibility on handling phy_connect(), by
iterating over the phy-handle, when new DT is used with older kernel.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:46 +0000 (22:05 -0700)]
Documentation: dtb: xgene: Add rxlos GPIO mapping
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:45 +0000 (22:05 -0700)]
dtb: xgene: Add rxlos-gpios property
Added rxlos GPIO mapping by adding rxlos-gpios property.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:44 +0000 (22:05 -0700)]
drivers: net: xgene: Poll link status via GPIO
When 10GbE SFP+ module is not plugged in or cable is not connected,
the link status register does not report the proper state due
to floating signal. This patch checks the module present status via an
GPIO to determine whether to ignore the link status register and report
link down.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:43 +0000 (22:05 -0700)]
drivers: net: xgene: XFI PCS reset when link is down
This patch fixes the link recovery issue, by doing PCS reset
when the link is down.
Signed-off-by: Fushen Chen <fchen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:42 +0000 (22:05 -0700)]
drivers: net: xgene: Change port init sequence
This patch rearranges the port initialization sequence as recommended by
hardware specification. This patch also removes, mac_init() call from
xgene_enet_link_state(), as it was not required.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:41 +0000 (22:05 -0700)]
drivers: net: xgene: Fix RSS indirection table fields
This patch fixes FPSel and NxtFPSel fields length to 5-bit value.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:40 +0000 (22:05 -0700)]
drivers: net: xgene: Fix error deconstruction path
Since register_netdev() call in xgene_enet_probe() was moved down to
the end, it doesn't properly handle errors that may occur, by
deconstructing everything that was setup before the error occurred.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:39 +0000 (22:05 -0700)]
drivers: net: xgene: fix: Delete descriptor rings and buffer pools
xgene_enet_init_hw() should delete any descriptor rings and
buffer pools setup should le_ops->cle_init() return an error.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:38 +0000 (22:05 -0700)]
drivers: net: xgene: fix: Add dma_unmap_single
In addition to xgene_enet_delete_bufpool() freeing skbs, their associated
dma memory should also be unmapped.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Sat, 13 Aug 2016 05:05:37 +0000 (22:05 -0700)]
drivers: net: xgene: Fix compiler warnings
Fixed compiler warnings reported with -Wmaybe-uninitialized W=1,
/drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_rx_frame’:
../drivers/net/ethernet/apm/xgene/xgene_enet_main.c:455:27: warning: variable ‘pdata’ set but not used [-Wunused-but-set-variable]
struct xgene_enet_pdata *pdata;
^
../drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_remove’:
../drivers/net/ethernet/apm/xgene/xgene_enet_main.c:1691:30: warning: variable ‘mac_ops’ set but not used [-Wunused-but-set-variable]
const struct xgene_mac_ops *mac_ops;
^
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 04:57:13 +0000 (21:57 -0700)]
Merge branch 'bpf-improvements'
Alexei Starovoitov says:
====================
bpf improvements
Two bpf improvements:
1. allow bpf helpers like bpf_map_lookup_elem() access packet data directly
for XDP programs
2. enable bpf_get_prandom_u32() for tracing programs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Fri, 12 Aug 2016 01:17:18 +0000 (18:17 -0700)] 
bpf: allow bpf_get_prandom_u32() to be used in tracing
bpf_get_prandom_u32() was initially introduced for socket filters
and later requested numberous times to be added to tracing bpf programs
for the same reason as in socket filters: to be able to randomly
select incoming events.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aaron Yue [Fri, 12 Aug 2016 01:17:17 +0000 (18:17 -0700)] 
samples/bpf: add verifier tests for the helper access to the packet
test various corner cases of the helper function access to the packet
via crafted XDP programs.
Signed-off-by: Aaron Yue <haoxuany@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Fri, 12 Aug 2016 01:17:16 +0000 (18:17 -0700)]
bpf: allow helpers access the packet directly
The helper functions like bpf_map_lookup_elem(map, key) were only
allowing 'key' to point to the initialized stack area.
That is causing performance degradation when programs need to process
millions of packets per second and need to copy contents of the packet
into the stack just to pass the stack pointer into the lookup() function.
Allow such helpers read from the packet directly.
All helpers that expect ARG_PTR_TO_MAP_KEY, ARG_PTR_TO_MAP_VALUE,
ARG_PTR_TO_STACK assume byte aligned pointer, so no alignment concerns,
only need to check that helper will not be accessing beyond
the packet range verified by the prior 'if (ptr < data_end)' condition.
For now allow this feature for XDP programs only. Later it can be
relaxed for the clsact programs as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Sat, 13 Aug 2016 01:54:15 +0000 (01:54 +0000)] 
sit: make function ipip6_valid_ip_proto() static
Fixes the following sparse warning:
net/ipv6/sit.c:1129:6: warning:
symbol 'ipip6_valid_ip_proto' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 04:49:42 +0000 (21:49 -0700)]
Merge branch 'bpf-under-cgroup'
Sargun Dhillon says:
====================
Add test_current_task_under_cgroup bpf helper and test
This patchset includes a helper and an example to determine whether the probe is
currently executing in the context of a specific cgroup based on a cgroup bpf
map / array. The helper checks the cgroupsv2 hierarchy based on the handle in
the map and if the current cgroup is equal to it, or a descendant of it. The
helper was tested with the example program, and it was verified that the correct
behaviour occurs in the interrupt context.
In an earlier version of this patchset I had added an "opensnoop"-like tool, and
I realized I was basically reimplementing a lot of the code that already exists
in the bcc repo. So, instead I decided to write a test that creates a new mount
namespace, mounts up the cgroupv2 hierarchy, and does some basic tests. I used
the sync syscall as a canary for these tests because it's a simple, 0-arg
syscall. Once this patch is accepted, adding support to opensnoop will be easy.
I also added a task_under_cgroup_hierarchy function in cgroups.h, as this
pattern is used in a couple places. Converting those can be done in a later
patchset.
Thanks to Alexei, Tejun, and Daniel for providing review.
v1->v2: Clean up
v2->v3: Move around ifdefs out of *.c files, add an "integration" test
v3->v4: De-genercize arraymap fetching function;
rename helper from in_cgroup to under_cgroup (makes much more sense)
Split adding cgroups task_under_cgroup_hierarchy function
v4->v5: Fix formatting
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sargun Dhillon [Fri, 12 Aug 2016 15:57:04 +0000 (08:57 -0700)] 
samples/bpf: Add test_current_task_under_cgroup test
This test has a BPF program which writes the last known pid to call the
sync syscall within a given cgroup to a map.
The user mode program creates its own mount namespace, and mounts the
cgroupsv2 hierarchy in there, as on all current test systems
(Ubuntu 16.04, Debian), the cgroupsv2 vfs is unmounted by default.
Once it does this, it proceeds to test.
The test checks for positive and negative condition. It ensures that
when it's part of a given cgroup, its pid is captured in the map,
and that when it leaves the cgroup, this doesn't happen.
It populate a cgroups arraymap prior to execution in userspace. This means
that the program must be run in the same cgroups namespace as the programs
that are being traced.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sargun Dhillon [Fri, 12 Aug 2016 15:56:52 +0000 (08:56 -0700)]
bpf: Add bpf_current_task_under_cgroup helper
This adds a bpf helper that's similar to the skb_in_cgroup helper to check
whether the probe is currently executing in the context of a specific
subset of the cgroupsv2 hierarchy. It does this based on membership test
for a cgroup arraymap. It is invalid to call this in an interrupt, and
it'll return an error. The helper is primarily to be used in debugging
activities for containers, where you may have multiple programs running in
a given top-level "container".
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sargun Dhillon [Fri, 12 Aug 2016 15:56:40 +0000 (08:56 -0700)]
cgroup: Add task_under_cgroup_hierarchy cgroup inline function to headers
This commit adds an inline function to cgroup.h to check whether a given
task is under a given cgroup hierarchy. This is to avoid having to put
ifdefs in .c files to gate access to cgroups. When cgroups are disabled
this always returns true.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 03:55:41 +0000 (20:55 -0700)]
Merge tag 'batadv-next-for-davem-
20160812' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature patchset includes the following changes (mostly
chronological order):
- bump version strings, by Simon Wunderlich
- kerneldoc clean up, by Sven Eckelmann
- enable RTNL automatic loading and according documentation
changes, by Sven Eckelmann (2 patches)
- fix/improve interface removal and associated locking, by
Sven Eckelmann (3 patches)
- clean up unused variables, by Linus Luessing
- implement Gateway selection code for B.A.T.M.A.N. V by
Antonio Quartulli (4 patches)
- rewrite TQ comparison by Markus Pargmann
- fix Cocinelle warnings on bool vs integers (by Fenguang Wu/Intels
kbuild test robot) and bitwise arithmetic operations (by Linus
Luessing)
- rewrite packet creation for forwarding for readability and to avoid
reference count mistakes, by Linus Luessing
- use kmem_cache for translation table, which results in more efficient
storing of translation table entries, by Sven Eckelmann
- rewrite/clarify reference handling for send_skb_unicast, by Sven
Eckelmann
- fix debug messages when updating routes, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 03:42:20 +0000 (20:42 -0700)]
Merge branch 'sfc-SFN8000-support-improvements'
Bert Kenward says:
====================
sfc: SFN8000 support improvements
This series improves support for the recently released SFN8000 series
of adapters. Specifically, it retrieves interrupt moderation timer
settings directly from the adapter and uses those settings. It also
uses a new event queue initialisation interface, allowing specification
of a performance objective rather than enabling individual flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 11 Aug 2016 12:02:36 +0000 (13:02 +0100)] 
sfc: get timer configuration from adapter
On SFN8000 series adapters the MC provides a method to get the timer
quantum and the maximum timer setting. We revert to the old values if the
new call is unavailable.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 11 Aug 2016 12:02:09 +0000 (13:02 +0100)]
sfc: set interrupt moderation via MCDI
SFN8000-series NICs require a new method of setting interrupt moderation,
via MCDI. This is indicated by a workaround flag. This new MCDI command
takes an explicit time value rather than a number of ticks. It therefore
makes sense to also store the moderation values in terms of time, since
that is what the ethtool interface is interested in.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 11 Aug 2016 12:01:54 +0000 (13:01 +0100)]
sfc: use new performance based event queue init
Rather than explicitly specifying flags we can now specify a desired
performance target to the firmware, ie higher throughput or lower latency.
For now we use the default "auto" configuration.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 11 Aug 2016 12:01:35 +0000 (13:01 +0100)]
sfc: retrieve second word of datapath capabilities
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 11 Aug 2016 12:01:21 +0000 (13:01 +0100)]
sfc: allow asynchronous MCDI without completion function
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 11 Aug 2016 12:01:01 +0000 (13:01 +0100)]
sfc: update MCDI protocol headers
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Thu, 11 Aug 2016 09:51:00 +0000 (17:51 +0800)] 
net: ethernet: mediatek: enhance the locking using the lightweight ones
Since these critical sections protected by page_lock are all entered
from the user context or bottom half context, they can be replaced
with the spin_lock() or spin_lock_bh instead of spin_lock_irqsave().
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Wed, 10 Aug 2016 11:03:22 +0000 (14:03 +0300)] 
net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)
This is a driver for the ENA family of networking devices.
Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Aug 2016 23:57:20 +0000 (16:57 -0700)]
Merge branch 'xilinx-gmiitorgmii-converter'
Kedareswara rao Appana says:
====================
net: phy: Add xilinx gmiitorgmii converter support
The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media
Independent Interface (RGMII) core provides the RGMII between RGMII-compliant
Ethernet physical media devices (PHY) and the Gigabit Ethernet controller.
This core can be used in all three modes of operation(10/100/1000 Mb/s).
The Management Data Input/Output (MDIO) interface is used to configure the
Speed of operation. This core can switch dynamically between the three
Different speed modes by configuring the conveter register through mdio write.
The conveter sits b/w the MAC and external phy like below
MACB <==> GMII2RGMII <==> RGMII_PHY
MDIO <========> GMII2RGMII
MCAB <=======>
<========> RGMII
Using MAC MDIO bus we can access both the converter and the external PHY.
We need to program the line speed of the converter during run time based
On the external phy negotiated speed.
This patch series does the below
---> Add mask for Control register 10Mbps speed.
---> Add support for xilinx gmiitorgmii converter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Appana Durga Kedareswara Rao [Wed, 10 Aug 2016 05:50:08 +0000 (11:20 +0530)] 
net: phy: Add gmiitorgmii converter support
This patch adds support for gmiitorgmii converter.
The GMII to RGMII IP core provides the Reduced Gigabit Media
Independent Interface (RGMII) between Ethernet physical media
Devices and the Gigabit Ethernet controller. This core can
Switch dynamically between the three different speed modes of
Operation by configuring the converter register through mdio write.
MDIO interface is used to set operating speed of Ethernet MAC.
This converter sits between the MAC and the external phy
MAC <==> GMII2RGMII <==> RGMII_PHY
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Appana Durga Kedareswara Rao [Wed, 10 Aug 2016 05:50:07 +0000 (11:20 +0530)]
Documentation: DT: net: Add Xilinx gmiitorgmii converter device tree binding documentation
Device-tree binding documentation for xilinx gmiitorgmii converter.
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Appana Durga Kedareswara Rao [Wed, 10 Aug 2016 05:50:06 +0000 (11:20 +0530)]
net: Add mask for Control register 10Mbps speed
This patch adds mask for the Control register
10Mbps speed.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Thu, 11 Aug 2016 12:59:53 +0000 (14:59 +0200)] 
nl80211: explicitly check enum nl80211_mesh_power_mode
Different gcc versions appear to be treating enum with different
signedness, causing warnings with the out parameter one way or
the other.
Just use the correct type to avoid all that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Maxim Altshul [Thu, 11 Aug 2016 10:38:16 +0000 (13:38 +0300)] 
mac80211: call get_expected_throughput only after adding station
Depending on which method the driver implements, userspace could
call this (indirectly, by getting station info) before the driver
knows about the station, possibly causing it to misbehave.
Therefore, add a check for sta->uploaded which indicates that the
driver knows about the station.
Signed-off-by: Maxim Altshul <maxim.altshul@ti.com>
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Purushottam Kushwaha [Thu, 11 Aug 2016 09:44:02 +0000 (15:14 +0530)] 
cfg80211: identically validate beacon interval for AP/MESH/IBSS
Beacon interval interface combinations validation was missing
for MESH/IBSS join, add those.
Johannes: also move the beacon interval check disallowing really
tiny and really big intervals into the common function, which
adds it for AP mode.
Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Denis Kenzior [Wed, 3 Aug 2016 21:58:35 +0000 (16:58 -0500)] 
cfg80211: always notify userspace when wireless netdev is removed
This change alters the semantics of NL80211_CMD_DEL_INTERFACE events
by always sending this event whenever a net_device object associated
with a wdev is destroyed. Prior to this change, this event was only
emitted as a result of NL80211_CMD_DEL_INTERFACE command sent from
userspace. This allows userspace to reliably detect when wireless
interfaces have been removed, e.g. due to USB removal events, etc.
For wireless device objects without an associated net_device (e.g.
NL80211_IFTYPE_P2P_DEVICE), the NL80211_CMD_DEL_INTERFACE event is
now generated inside cfg80211_unregister_wdev.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Denis Kenzior [Wed, 3 Aug 2016 21:58:33 +0000 (16:58 -0500)]
cfg80211: always notify userspace of new wireless netdevs
This change alters the semantics of NL80211_CMD_NEW_INTERFACE events
by always sending this event whenever a new net_device object
associated with a wdev is registered. Prior to this change, this event
was only sent as a result of NL80211_CMD_NEW_INTERFACE command sent
from userspace. This allows userspace to reliably detect new wireless
interfaces (e.g. due to hardware hot-plug events, etc).
For wdevs created without an associated net_device object (e.g.
NL80211_IFTYPE_P2P_DEVICE), the NL80211_CMD_NEW_INTERFACE event is
still generated inside the relevant nl80211 command handler.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Wed, 13 Jul 2016 09:00:02 +0000 (11:00 +0200)] 
mac80211: remove skb header offset mangling in ieee80211_build_hdr
Since the code only touches the MAC headers, the offsets to the
network/transport headers remain the same throughout this function.
Remove pointless pieces of code that try to 'preserve' them.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Maxim Altshul [Mon, 11 Jul 2016 14:15:24 +0000 (17:15 +0300)]
mac80211: mesh: Add support for HW RC implementation
Mesh HWMP module will be able to rely on the HW
RC algorithm if it exists, for path metric calculations.
This allows the metric calculation mechanism to calculate
a correct metric, based on PER and last TX rate both via
HW RC algorithm if it exists or via parameters collected
by the SW.
Signed-off-by: Maxim Altshul <maxim.altshul@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Philippe Reynes [Tue, 9 Aug 2016 22:04:49 +0000 (00:04 +0200)] 
net: ethernet: renesas: sh_eth: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Philippe Reynes [Tue, 9 Aug 2016 22:04:48 +0000 (00:04 +0200)]
net: ethernet: renesas: sh_eth: use phydev from struct net_device
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy_dev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adam Barth [Wed, 10 Aug 2016 16:45:39 +0000 (09:45 -0700)] 
samples/bpf: fix bpf_perf_event_output prototype
The commit
555c8a8623a3 ("bpf: avoid stack copy and use skb ctx for event output")
started using 20 of initially reserved upper 32-bits of 'flags' argument
in bpf_perf_event_output(). Adjust corresponding prototype in samples/bpf/bpf_helpers.h
Signed-off-by: Adam Barth <arb@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Harini Katakam [Tue, 9 Aug 2016 07:45:53 +0000 (13:15 +0530)] 
net: macb: Add 64 bit addressing support for GEM
This patch adds support for 64 bit addressing and BDs.
-> Enable 64 bit addressing in DMACFG register.
-> Set DMA mask when design config register shows support for 64 bit addr.
-> Add new BD words for higher address when 64 bit DMA support is present.
-> Add and update TBQPH and RBQPH for MSB of BD pointers.
-> Change extraction and updation of buffer addresses to use
64 bit address.
-> In gem_rx extract address in one place insted of two and use a
separate flag for RXUSED.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sudarsana Reddy Kalluru [Tue, 9 Aug 2016 07:51:23 +0000 (03:51 -0400)] 
qed*: Add support for ethtool link_ksettings callbacks.
This patch adds the driver implementation for ethtool link_ksettings
callbacks. qed driver now defines/uses the qed specific masks for
representing link capability values. qede driver maps these values to
to new link modes defined by the kernel implementation of link_ksettings.
Please consider applying this to 'net-next' branch.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Aug 2016 00:27:41 +0000 (17:27 -0700)]
Merge branch 'cpsw-refactor'
Ivan Khoronzhuk says:
====================
net: ethernet: ti: cpsw: split driver data and per ndev data
In dual_emac mode the driver can handle 2 network devices. Each of them can use
its own private data and common data/resources. This patchset splits common driver
data/resources and private per net device data.
It leads to:
- reduce memory usage
- increase code readability
- allows add a bunch of simplification
- create prerequisites to add multi-channel support,
when channels are shared between net devices
Doesn't have bad impact on performance.
v2: https://lkml.org/lkml/2016/8/6/108
Since v2:
- removed patch:
net: ethernet: ti: cpsw: fix int dbg message
- replaced patch:
"net: ethernet: ti: cpsw: remove redundant check in napi poll"
on "net: ethernet: ti: cpsw: remove intr dbg msg from poll handlers"
- removed macro "cpsw_get_slave_ndev"
- corrected some commits
Since v1:
- added several patch improvements
- avoided variable reordering in structures
- removed static variable for common function
- split big patch on several patches:
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 9 Aug 2016 23:22:44 +0000 (02:22 +0300)] 
net: ethernet: ti: cpsw: move ale, cpts and drivers params under cpsw_common
The ale, cpts, version, rx_packet_max, bus_freq, interrupt pacing
parameters are common per net device that uses the same h/w. So,
move them to common driver structure.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 9 Aug 2016 23:22:43 +0000 (02:22 +0300)]
net: ethernet: ti: cpsw: move napi struct to cpsw_common
The napi structs are common for both net devices in dual_emac
mode, In order to not hold duplicate links to them, move to
cpsw_common.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 9 Aug 2016 23:22:42 +0000 (02:22 +0300)]
net: ethernet: ti: cpsw: move platform data and slaves info to cpsw_common
These data are common for net devs in dual_emac mode. No need to hold
it for every priv instance, so move them under cpsw_common.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 9 Aug 2016 23:22:41 +0000 (02:22 +0300)]
net; ethernet: ti: cpsw: move irq stuff under cpsw_common
The irq data are common for net devs in dual_emac mode. So no need to
hold these data in every priv struct, move them under cpsw_common.
Also delete irq_num var, as after optimization it's not needed.
Correct number of irqs to 2, as anyway, driver is using only 2,
at least for now.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This page took 0.045939 seconds and 5 git commands to generate.
projects / deliverable / linux.git / log
