Guennadi Liakhovetski [Mon, 1 Dec 2008 12:44:56 +0000 (09:44 -0300)]
V4L/DVB (9786): soc-camera: formatting fixes
Minor formatting fixes
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Mon, 1 Dec 2008 12:44:53 +0000 (09:44 -0300)]
V4L/DVB (9785): soc-camera: merge .try_bus_param() into .try_fmt_cap()
.try_bus_param() method from struct soc_camera_host_ops is only called at one
location immediately before .try_fmt_cap(), there is no value in keeping these
two methods separate, merge them.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Kuninori Morimoto [Mon, 1 Dec 2008 12:44:51 +0000 (09:44 -0300)]
V4L/DVB (9784): Register name fix for ov772x driver
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Kuninori Morimoto [Mon, 1 Dec 2008 12:44:48 +0000 (09:44 -0300)]
V4L/DVB (9783): Change power on/off sequence on ov772x
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 30 Nov 2008 13:01:21 +0000 (10:01 -0300)]
V4L/DVB (9778): cx18: cx18_writel_expect() should not declare success on a PCI read error
cx18: cx18_writel_expect() should not declare success on a PCI read error.
This removes the potential for cx18_write*_expect() calls to not
accomplish a PCI write successfully as expected. The CX18-AV core uses the
*expect() calls often and this may be the source of intermittent audio
problems and standands switching problems.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Wed, 26 Nov 2008 00:43:05 +0000 (21:43 -0300)]
V4L/DVB (9776): cx18: Change to per CX23418 device work queues for deferrable work handling
cx18: Change to per CX23418 device work queues for deferrable work handling.
Needed to support 2.6.22 and earlier kernels that can't selectively cancel
work orders. Also will provide slightly better performance on SMP systems.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 8 Dec 2008 13:36:57 +0000 (10:36 -0300)]
V4L/DVB (9775): tda8290: fix FM radio
tda8290 were using some random video standard for FM. This results on random
errors. Instead, program tda8290 in expert mode, using a configuration near the
one specified on NXP datasheet for tda8295 (available on their site).
Also, properly display that the device is on radio mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 8 Dec 2008 03:49:33 +0000 (00:49 -0300)]
V4L/DVB (9774): tda827x: fix returned frequency
Probably due to a removed code, tda827x were doing some wrong calculus at the
returned frequency. I suspect that the original idea were to return the
programmed divisor converted into frequency again.
However, the current code is sometimes multiplying the programmed frequency by
62500, and, on other cases, like radio, it dividing it by 1000.
Instead of doing such math, let's just store the frequency value as requested by
the caller module.
Cc: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 8 Dec 2008 02:01:57 +0000 (23:01 -0300)]
V4L/DVB (9773): tda827x: fix printk message when in FM mode
Cc: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 7 Dec 2008 16:19:29 +0000 (13:19 -0300)]
V4L/DVB (9772): saa7134: Add support for Kworld Plus TV Analog Lite PCI
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring
this
development.
Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 5 Dec 2008 13:49:53 +0000 (10:49 -0300)]
V4L/DVB (9771): tuner-xc2028: fix a small warning
/home/mauro/v4l-dvb/v4l/tuner-xc2028.c: In function 'xc2028_sleep':
/home/mauro/v4l-dvb/v4l/tuner-xc2028.c:1111: warning: 'return' with no value, in function returning non-void
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 5 Dec 2008 13:39:12 +0000 (10:39 -0300)]
V4L/DVB (9770): em28xx: turn off tuner when not used
em28xx devices generally get hot when xc3028 tuner is powered on. This
patch solves this by turning power off when the device is not used, at the
expense of having a higher load time, when calling a TV application.
Since firmware load happens on 1 or 2 seconds on most devices, this is not a pain.
Also, it helps to save the planet by saving some power :)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 5 Dec 2008 13:31:16 +0000 (10:31 -0300)]
V4L/DVB (9769): tuner-xc2028: powers device of when not used
Since the firmware load is now fast on most boards, better to keep the tuner
off by default. A modprobe parameter were added to keep the old behavior,
to be used by old devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 26 Nov 2008 12:58:48 +0000 (09:58 -0300)]
V4L/DVB (9756): em28xx: Improve register log format
Change log format to look more like URB transactions. In fact, setup and
IN/OUT transactions are merged. This helps to debug the driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 22 Nov 2008 17:33:00 +0000 (14:33 -0300)]
V4L/DVB (9737): sms1xxx: enable LNA control on Hauppauge WinTV MiniCard
Power the LNA while the frontend is in use.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 23 Nov 2008 19:27:57 +0000 (16:27 -0300)]
V4L/DVB (9730): cx18: Quiet a sometimes common warning that often has benign consequences
cx18: Quiet a sometimes common warning that often has benign consequences.
No one probably cares that the firmware took forever to ack our command, as
they always seem to succeed whether or not the firmware acks it in a reasonable
amount of time.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 22 Nov 2008 04:40:11 +0000 (01:40 -0300)]
V4L/DVB (9729): cx18: Update version due to significant irq handling changes
Update the version number due to significant changes in the way the
mailboxes and interrupts are handled.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 22 Nov 2008 04:37:34 +0000 (01:37 -0300)]
V4L/DVB (9728): cx18: Copyright attribution update for files modified by awalls
Add copyright attribution for files modified by awalls in 2008
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 22 Nov 2008 04:23:22 +0000 (01:23 -0300)]
V4L/DVB (9727): cx18: Adjust outgoing mailbox timeouts and remove statistics logging
cx18: Adjust outgoing mailbox timeouts and remove statistics logging.
This saves some wasted storage in struct cx18 for each card. Cutting
the outgoing mailbox timeouts in half from the previous value appears to
be safe with MythTV. Got rid of interrupted case code path after
a wait uninterruptable returns.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Wed, 19 Nov 2008 04:24:33 +0000 (01:24 -0300)]
V4L/DVB (9726): cx18: Restore buffers that have fallen out of the transfer rotation
Restore buffers that have fallen out of the transfer rotation, and check
for coherent mailbox data when processing a stale mailbox.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Tue, 18 Nov 2008 01:48:46 +0000 (22:48 -0300)]
V4L/DVB (9725): cx18: Remove unnecessary MMIO accesses in time critical irq handling path
Remove unnecessary MMIO accesses in time critical irq handling path. Also
ensured that the mailbox ack field is read in last, so we know for sure if we
have a stale mailbox or not on receipt.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Mon, 17 Nov 2008 02:33:41 +0000 (23:33 -0300)]
V4L/DVB (9724): cx18: Streamline cx18-io[ch] wrappers and enforce MMIO retry strategy
cx18: Streamline cx18-io[ch] wrappers and enforce MMIO retry strategy so that
write retries always occur and read retries never occur (as they never help).
Remove MMIO statistics logging to speed up MMIO accesses. Deprecate & ignore
retry_mmio and mmio_ndelay module parameters, to essentially force
retry_mmio=1 and mmio_ndelay=0.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Mon, 17 Nov 2008 00:18:00 +0000 (21:18 -0300)]
V4L/DVB (9723): cx18: Propagate staleness of mailbox and mdl ack data to work handler
cx18: Propagate staleness of mailbox and mdl ack data to work handler to let
the work handler know that the data from the encoder may not be coherent.
Allows for smarter handling of buffers in future, to deal with MDLs that fall
out of rotation due to irq handler being late in collecting mailbox and mdl ack
info.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 16 Nov 2008 23:18:05 +0000 (20:18 -0300)]
V4L/DVB (9722): cx18: Convert per stream queue spinlocks into mutexes
Convert the per stream queue spinlocks into mutexes. All queue
manipulation happens via the work queue or system calls into the driver, and
not in an interrupt context. This reduces the amout of time the cx18 driver
keeps interrupts disabled.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 16 Nov 2008 20:15:01 +0000 (17:15 -0300)]
V4L/DVB (9721): cx18: Change to singlethreaded global work queue thread for deferable work
Change to singlethreaded global work queue thread for deferable work,
instead of the kernel default multithreaded work queue. This ensures
execution of deferable work is always in the proper order, so caputred buffers
don't get reordered.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 16 Nov 2008 04:38:19 +0000 (01:38 -0300)]
V4L/DVB (9720): cx18: Major rewrite of interrupt handling for incoming mailbox processing
A major rewrite of interrupt handling for incoming mailbox processing, to split
the timing critical steps from the the deferrable steps as the sending XPU on
the CX23418 will time out and overwrite our incoming mailboxes rather quickly.
Setup a pool of work "order forms" for the irq handler to send jobs to the new
work handler routine which uses the kernel default work queue to do the
deferrable work. Started optimizing some of the cx18-io calls as they are now
the low hanging fruit for recoving microseconds back from the timeline.
Future optimizations will get rid of mmio read retries, mmio stats logging, and
combine smaller functions in the irq path into the larger ones to save ~2 us
each.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Sat, 22 Nov 2008 07:27:34 +0000 (04:27 -0300)]
V4L/DVB (9710): gspca: Remove some unuseful core in main.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Wed, 19 Nov 2008 20:16:26 +0000 (17:16 -0300)]
V4L/DVB (9707): gspca: Remove the event counter and simplify the frame wait.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alexey Klimov [Wed, 19 Nov 2008 03:36:29 +0000 (00:36 -0300)]
V4L/DVB (9655): radio-mr800: fix unplug
This patch fixes problems(kernel oopses) with unplug of device while
it's working.
Patch adds disconnect_lock mutex, changes usb_amradio_close and
usb_amradio_disconnect functions and adds a lot of safety checks.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 9 Nov 2008 22:51:44 +0000 (19:51 -0300)]
V4L/DVB (9599): cx18: Fix unitialized variable problem upon APU firmware file read failure
If APU firmware file read failed, the jump vector to the APU was undefined and
the APU would be started executing garbage. Fix uninitialized variable to be
an infinite loop for the APU, but also bail out before even starting the APU.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 9 Nov 2008 21:14:07 +0000 (18:14 -0300)]
V4L/DVB (9598): cx18: Prevent CX23418 from clearing it's outgoing ack interrupts to driver
When the CX23418 CPU unit sent out an ack interrupt to the linux driver, it
also received that interrupt and cleared the flag before the linux driver could
see what the interrupt was for. This fix prevents the CPU from receiving an
IRQ for it's own outgoing ack's to the linux driver. This fix is critical now
that the linux driver doesn't poll but relies on these ack interrupts.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 8 Nov 2008 20:14:22 +0000 (17:14 -0300)]
V4L/DVB (9597): cx18: Minor fixes to APU firmware load process
Use the APU fw start address from rom file instead of a hardcoded entry vector.
Fixed cx18_setup_page() calls to use the correct APU image load addresses.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 8 Nov 2008 17:19:37 +0000 (14:19 -0300)]
V4L/DVB (9596): cx18: Further changes to improve mailbox protocol integrity & performnce
All waits for cx18 mailbox API commands are now uninterruptable. Added
code to collect mailbox ack statistics. Tweaked timeouts based on collected
stats and video vertical frame and field rates.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 8 Nov 2008 02:57:46 +0000 (23:57 -0300)]
V4L/DVB (9595): cx18: Improve handling of outgoing mailboxes detected to be busy
cx18: Improve handling of outgoing mailboxes detected to be busy. When
encountering a busy mailbox, sleep instead of polling, and wait for interrupt or
timeout. If the mailbox is still busy, force it free. When sending commands,
make sure we never create a situation where we mark the mailbox busy upon
sending, and ensure we always have a method to cleanly recover from a busy
mailbox.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Thu, 6 Nov 2008 04:33:27 +0000 (01:33 -0300)]
V4L/DVB (9594): cx18: Roll driver version number due to significant changes
Driver interrupt and mailbox handling has change significantly.
Time for a roll to v1.0.2.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Thu, 6 Nov 2008 04:15:41 +0000 (01:15 -0300)]
V4L/DVB (9593): cx18: Add outgoing mailbox mutexes and check for ack via waitq vs poll
Add mutexes to ensure exclusive access for outgoing driver to CX23418 mailboxes.
Also wait on a waitq for mailbox acknowledgement from the CX23418 instead of
polling.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Thu, 6 Nov 2008 00:19:15 +0000 (21:19 -0300)]
V4L/DVB (9592): cx18: Use default kernel work queue; fix streaming flag for work handler
cx18: Use default kernel work queue; fix streaming flag for work handler.
Eliminate cx18 specific work queue and use the kernel default work queue.
Fixed the F_STREAMING_FLAG for the TS stream so cx18_dvb_work_handler()
can know when it is not safe to send MDLs to the firmware.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Thu, 6 Nov 2008 18:35:21 +0000 (15:35 -0300)]
V4L/DVB (9558): gspca: Add the light frequency control for the sensor HV7131B in zc3xx
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 2 Nov 2008 21:15:28 +0000 (18:15 -0300)]
V4L/DVB (9513): cx18: Reduce number of mmio read retries
cx18: Reduce number of mmio read retries to improve performance. Experiments
have shown 2 things: read retries never improve the result of a suspect mmio
read from the CX23418 (the result stays all 0xff's), and that most of the
suspected read failures are actually proper reads of values that should be
all 0xff's. This change reduces the number of read retries and keeps the
count separate from write retries.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Mon, 19 Nov 2007 19:44:47 +0000 (16:44 -0300)]
V4L/DVB (9442): Revert back previous change to 90MHz
Note:
* At High Symbol Rates we do not have enouph machine cycles to handle the
incoming symbols and hence might run into problems at the very end of the
specified definition
* Most of the equations have been calculated for a master clock of 99 MHz,
running at 90MHz, raises lot of issues such as the need to recalculate
all of them , which is eventually very painful.
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Tue, 30 Oct 2007 12:31:13 +0000 (09:31 -0300)]
V4L/DVB (9431): Bug ID #19: Diseqc works properly at 90MHz only on Cut 1.1 and 2.0
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Thu, 18 Oct 2007 09:25:51 +0000 (06:25 -0300)]
V4L/DVB (9425): Initialize at 90MHz itself
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 29 Nov 2008 02:46:43 +0000 (23:46 -0300)]
V4L/DVB (9767): em28xx: improve board description messages
Print manufacturer/product info from USB device and also card entry.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Nov 2008 17:32:17 +0000 (14:32 -0300)]
V4L/DVB (9766): em28xx: improve probe messages
Prints usb speed used by em28xx interface. While there, fixes USB ID's
endiannes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Nov 2008 12:21:55 +0000 (09:21 -0300)]
V4L/DVB (9765): em28xx: move tuner gpio's to the cards struct
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Nov 2008 12:10:40 +0000 (09:10 -0300)]
V4L/DVB (9764): em28xx: Add support for suspend the device when not used
Several chips may be turned off when the device is not used, like audio,
video and dvb demods. This patch adds a gpio callback at the core
structs to allow turning off such devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Nov 2008 12:00:00 +0000 (09:00 -0300)]
V4L/DVB (9763): em28xx: fix gpio settings
A previous changeset moved gpio from em28xx struct into em28xx_board.
However, the driver were not updated to properly honor those gpio's.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Nov 2008 10:46:59 +0000 (07:46 -0300)]
V4L/DVB (9762): em28xx: fix tuner absent entries
Before this patch, several devices without tuner were kept the value 0
for tuner_type. However, this means TUNER_TEMIC_PAL. Replace those
entries for the proper TUNER_ABSENT value.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Nov 2008 10:44:00 +0000 (07:44 -0300)]
V4L/DVB (9761): em28xx: replace magic numbers for mux aliases
Instead of using magic vmux/amux, let's use an alias where possible.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Nov 2008 10:42:26 +0000 (07:42 -0300)]
V4L/DVB (9760): em28xx: move gpio lines into board table description
Instead of a large, ugly switch specifying the gpio tables for each
device, let's move it into the boards struct. This also helps to see
what boards have already the gpio's for DVB.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Nov 2008 16:16:13 +0000 (13:16 -0300)]
V4L/DVB (9759): em28xx: move gpio tables to the top of em28xx-cards
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 26 Nov 2008 19:28:42 +0000 (16:28 -0300)]
V4L/DVB (9758): em28xx: replace some magic by register descriptions where known
Replaces all occurrences of em28xx_write_regs_req() and em28xx_write_reg()
used to setup register names by em28xx_write_reg().
Also, documents the register names that are known.
This patch were generated by this small perl script:
my %reg_map = (
# Register table - the same as defined on parse_em28xx.pl script
);
while (<>) {
if (m/(.*)em28xx_write_regs_req\(dev\,\s*0x00\,\s*(.*)\,\s*\"\\x(..)\",\s*1\)\;(.*)/) {
my $reg = $2;
my $val = $3;
$val =~ tr/A-f/a-f/;
$reg = $reg_map{$reg} if defined($reg_map{$reg});
printf "$1em28xx_write_reg(dev, %s, 0x%s);$4\n", $reg, $val;
} elsif (m/(.*)em28xx_write_regs\(dev\,\s*(.*)\,\s*\"\\x(..)\",\s*1\)\;(.*)/) {
my $reg = $2;
my $val = $3;
$val =~ tr/A-f/a-f/;
$reg = $reg_map{$reg} if defined($reg_map{$reg});
printf "$1em28xx_write_reg(dev, %s, 0x%s);$4\n", $reg, $val;
} else {
print $_;
}
}
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Nov 2008 16:10:14 +0000 (13:10 -0300)]
V4L/DVB (9755): em28xx: cleanup: We need just one tuner callback
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Nov 2008 13:06:21 +0000 (10:06 -0300)]
V4L/DVB (9754): em28xx: improve debug messages
Now, the first message states board names. Also, removed printing the alternate
settings by default. I2C messages are now clearer.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Nov 2008 12:43:29 +0000 (09:43 -0300)]
V4L/DVB (9753): em28xx: cleanup: saa7115 module auto-detects saa711x type
Since saa7115 has saa711x chip auto-detection, there's no need on differenciating
it at cards table. Just use the generic name for all boards that use a philips
saa711x decoder.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Nov 2008 12:39:50 +0000 (09:39 -0300)]
V4L/DVB (9752): Remove duplicated fields on em28xx_board and em28xx structs
Several fields are duplicated on both structs. Let's just copy em28xx_board instead.
A later cleanup could just copy the fields that are changed, in order to keep em28xx_board
const.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Nov 2008 12:10:25 +0000 (09:10 -0300)]
V4L/DVB (9751): em28xx: card description cleanups
Remove unused em28xx_board.vchannels and em28xx.video_channels.
Also, .is_em2800 = 0 is not needed, as all data is zeroed by kernel loader.
The table also included a notice that svideo weren't test on Hauppauge
USB2. Remove this notice, since this input also works properly.
Also, it does some whitespace cleanups.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Nov 2008 10:05:06 +0000 (07:05 -0300)]
V4L/DVB (9747): em28xx: Properly handles XCLK and I2C speed
The previous patches removed XCLK and I2C magic. Now, we finally know
what those registers do. Also, only a very few cards need different
setups for those.
Instead of keeping the setups for those values inside the per-device
hack magic switch, move the uncommon values to the board-specific
struct, and have a common setup for all other boards.
So, almost 100 lines of hacking magic were removed.
A co-lateral effect of this patch is that it also fixes a bug at em28xx-core, where xclk
were set, without taking any care about not overriding a previous xclk setup.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 25 Nov 2008 09:04:02 +0000 (06:04 -0300)]
V4L/DVB (9745): em28xx: Cleanup GPIO/GPO setup code
Cleanup the calls to set the GPIOs and GPOs for various devices,
replacing the register number with the #define from em28xx-reg.h and
converting over to using em28xx_write_reg()
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 25 Nov 2008 09:03:31 +0000 (06:03 -0300)]
V4L/DVB (9744): em28xx: cleanup XCLK register usage
Convert over to setting the XCLK register usage with the new em28xx_write_reg()
function.
Thanks to Ray Lu from Empia for providing the em2860/2880 datasheet.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Uri Shkolnik [Sat, 22 Nov 2008 17:08:46 +0000 (14:08 -0300)]
V4L/DVB (9740): sms1xxx: add USB suspend and hibernation support
This patch provides USB suspend and hibernation support
for Siano's SMS chipset based USB device
Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 22 Nov 2008 18:32:19 +0000 (15:32 -0300)]
V4L/DVB (9739): sms1xxx: enable signal quality indicator LEDs on Hauppauge WinTV MiniStick
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 22 Nov 2008 17:56:37 +0000 (14:56 -0300)]
V4L/DVB (9738): sms1xxx: fix invalid unc readings
Add function smsdvb_read_ucblocks to report uncorrectable error counts.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 22 Nov 2008 17:26:37 +0000 (14:26 -0300)]
V4L/DVB (9736): sms1xxx: enable power LED on Hauppauge WinTV MiniStick
Enable power LED while the frontend is in use.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 17 Nov 2008 01:45:42 +0000 (22:45 -0300)]
V4L/DVB (9735): sms1xxx: turn off LEDs after initialization of Hauppauge WinTV MiniStick
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 22 Nov 2008 14:21:02 +0000 (11:21 -0300)]
V4L/DVB (9733): sms1xxx: add autodetection support for Hauppauge WinTV MiniCard
add USB IDs for Hauppauge WinTV MiniCard DVB-T
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sun, 16 Nov 2008 21:01:58 +0000 (18:01 -0300)]
V4L/DVB (9734): sms1xxx: add functions to configure and set gpio
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 22 Nov 2008 13:50:38 +0000 (10:50 -0300)]
V4L/DVB (9717): em28xx: improve message probing logs
On some em28xx devices, there's an unused interface. This is printed on
the logs as an error. We can just ignore that interface.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Sat, 22 Nov 2008 08:35:49 +0000 (05:35 -0300)]
V4L/DVB (9713): gspca: Add the ov534 webcams in the gspca documentation.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antonio Ospite [Sat, 22 Nov 2008 08:23:39 +0000 (05:23 -0300)]
V4L/DVB (9712): gspca:Subdriver ov534 added.
The OmniVision OV534 is the USB bridge chip used in Sony Playstation EYE,
it is found also in other webcams like Hercules Blog Webcam and
Hercules Dualpix HD.
This driver is the port to gspca of a prototype driver by Mark Ferrell
based on vivi. The original code to initialize the camera and start the
capture is from Jim Paris on ps2dev.org, here integrated with the analysis
of the USB communications taken by the windows driver.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Sat, 22 Nov 2008 07:53:31 +0000 (04:53 -0300)]
V4L/DVB (9711): gspca: Let gspca handle the webcams 045e:00f5 & 00f7 instead of sn9c102.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Sat, 22 Nov 2008 07:17:06 +0000 (04:17 -0300)]
V4L/DVB (9709): gspca: Fix typos and name errors in Kconfig.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Fri, 21 Nov 2008 07:34:15 +0000 (04:34 -0300)]
V4L/DVB (9708): gspca: Do the sn9c105 - ov7660 work again in sonixj.
The sn9c105 and sn9c120 bridges must be differently programmed for the ov7660.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Wed, 19 Nov 2008 20:10:47 +0000 (17:10 -0300)]
V4L/DVB (9706): gspca: Use the ref counting of v4l2 for disconnection.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Tue, 18 Nov 2008 17:38:10 +0000 (14:38 -0300)]
V4L/DVB (9703): Move the s5k4aa vflip quirk table to the main sensor file in order to avoid compilation errors on older kernels
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Tue, 18 Nov 2008 17:36:53 +0000 (14:36 -0300)]
V4L/DVB (9702): Move the ov9650 vflip table to avoid compilation warnings on older kernels
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Tue, 18 Nov 2008 17:32:27 +0000 (14:32 -0300)]
V4L/DVB (9701): Add a minor comment to the sensor init
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Sat, 1 Nov 2008 16:13:03 +0000 (13:13 -0300)]
V4L/DVB (9698): Add another vflip quirk for the s5k4aa
The msi gx7xx range of computers seem to be a strange lot with lots of different sys vendor names and differently oriented sensors. This commit adds another quirk for a range of them.
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Sat, 18 Oct 2008 19:20:36 +0000 (16:20 -0300)]
V4L/DVB (9696): Remove accidental typo
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Tue, 14 Oct 2008 05:41:54 +0000 (02:41 -0300)]
V4L/DVB (9694): Indent the m5602 register definitions
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Tue, 14 Oct 2008 05:38:49 +0000 (02:38 -0300)]
V4L/DVB (9693): Remove some unused defines
The gspca conversion deprecated a number of defines. Remove them.
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Tue, 18 Nov 2008 07:19:52 +0000 (04:19 -0300)]
V4L/DVB (9688): gspca: Reset the bulk URB status before resubmitting at irq level.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Mon, 17 Nov 2008 18:03:03 +0000 (15:03 -0300)]
V4L/DVB (9687): gspca: Split brightness and red and blue balance in spca501.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Mon, 17 Nov 2008 17:56:41 +0000 (14:56 -0300)]
V4L/DVB (9686): gspca: Don't return the control values from the webcams in spca501.
The bridge takes some time to update after a write, so apps doing a quick
write/read can get the old value back.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Mon, 17 Nov 2008 17:52:56 +0000 (14:52 -0300)]
V4L/DVB (9685): gspca: Correct restart of webcams in spca501.
Currently the spca501 driver only works the first time used, then the cam needs
to be unplugged or the driver reloaded, this is because currently the data
which should be send each time the stream is started is send only once.
Likewise currently the data to initialize the cam is send from the probe
function, and thus will not get send after a suspend/resume.
This patch fixes this by sending both at the right time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antonio Ospite [Fri, 14 Nov 2008 10:53:32 +0000 (07:53 -0300)]
V4L/DVB (9682): gspca: New subdriver parameter 'bulk_nurbs'.
Some webcams with image transfer by bulk messages accept one or many
permanent bulk read.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Tue, 11 Nov 2008 11:42:56 +0000 (08:42 -0300)]
V4L/DVB (9681): gspca: Rewrite the exchanges with the sensor ov7648 of sonixj.
The new exchanges are adapted from MS-win traces and the webcams work better.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Tue, 11 Nov 2008 10:10:11 +0000 (07:10 -0300)]
V4L/DVB (9680): gspca: Let gspca handle the webcam 0c45:613a instead of sn9c102.
The driver sn9c102 has no code for the ov7648 sensor.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 20 Nov 2008 08:37:05 +0000 (05:37 -0300)]
V4L/DVB (9678): af9015: Cleanup switch for usb ID
It is much more readable to swap the byteorder in the switch rather
than in each case statement.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dirk Heer [Fri, 21 Nov 2008 22:00:55 +0000 (19:00 -0300)]
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones
This Patch does modify the bttv-cards.c and bttc.h so that the driver
supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from
Phytec Messtechnik GmbH.
Signed-off-by: Dirk Heer <d.heer@phytec.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 21:47:37 +0000 (18:47 -0300)]
V4L/DVB (9676): em28xx: fix a regression caused by
22c90ec6a5e07173ee670dc2ca75e0df0a7772c0
If removing and reiserting the driver on some devices, tuner type will
be unset at the second time. This patch fixes this issue.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 21:38:29 +0000 (18:38 -0300)]
V4L/DVB (9675): em28xx: devices with xc2028/3028 don't have tda9887
This patch cleans up the entries of xc2028/3028, since those devices
don't need or use a tda9887.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 16:43:05 +0000 (13:43 -0300)]
V4L/DVB (9673): em28xx: fix Pixelview PlayTV board entry
Pixelview uses a Sigmatel stac codec. It has an external line out pin,
connected to AC97_MASTER_VOL. It also provides I2S output, but using a
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 16:39:39 +0000 (13:39 -0300)]
V4L/DVB (9672): Allow opening more than one output at the same time
Some devices use more than one AC97 outputs. This patch allows such
devices to properly work.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 15:49:33 +0000 (12:49 -0300)]
V4L/DVB (9671): em28xx: Add detection of Sigmatel Stac97xx series of AC97 devices
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 15:40:51 +0000 (12:40 -0300)]
V4L/DVB (9670): em28xx: allow specifying audio output
Some boards use different AC97 setups for output. This patch adds the
capability of specifying the output to be used. Currently, only one
output is selected, but the better is to allow user to select it via a
mixer, on alsa driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Nov 2008 15:10:44 +0000 (12:10 -0300)]
V4L/DVB (9669): em28xx: Fix a stupid cut-and-paste error
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oldrich Jedlicka [Fri, 14 Nov 2008 01:03:00 +0000 (22:03 -0300)]
V4L/DVB (9667): Fixed typo in sizeof() causing NULL pointer OOPS
Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alain Kalker [Mon, 17 Nov 2008 20:20:38 +0000 (17:20 -0300)]
V4L/DVB (9665): af9015: Add support for the Digittrade DVB-T USB Stick remote
Adds support for the Digittrade DVB-T USB Stick remote.
As the Digittrade USB stick identifies itself as a generic Afatech AF9015
device, the remote cannot be autodetected. To enable it, add the following
to /etc/modprobe.d/dvb-usb-af9015 or /etc/modprobe.conf:
options dvb-usb-af9015 remote=4
Signed-off-by: Alain Kalker <miki@dds.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Mon, 17 Nov 2008 21:32:11 +0000 (18:32 -0300)]
V4L/DVB (9662): uvcvideo: Fix printk badness when printing ioctl names
Add a trailing newline character after calling v4l_printk_ioctl() to avoid
messing the kernel log up and merge the uvc_v4l2_ioctl message with the ioctl
name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This page took 0.043523 seconds and 5 git commands to generate.