Ville Syrjälä [Mon, 18 Aug 2014 19:15:56 +0000 (22:15 +0300)]
drm/i915: Parametrize PANEL_PORT_SELECT_VLV
Passing the port as a parameter to PANEL_PORT_SELECT_VLV results in
neater code. Sadly the PCH port select bits aren't suitable for the
same treatment and the resulting macro would be much uglier, so
leave those defines as is.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thomas Daniel [Tue, 19 Aug 2014 09:13:36 +0000 (10:13 +0100)]
drm/i915/bdw: Populate lrc with aliasing ppgtt if required
A previous commit broke aliasing PPGTT for lrc, resulting in a kernel oops
on boot. Add a check so that is full PPGTT is not in use the context is
populated with the aliasing PPGTT.
Issue: VIZ-4278
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 18 Aug 2014 17:35:29 +0000 (10:35 -0700)]
drm/i915: honour forced connector modes
In the move over to use BIOS connector configs, we lost the ability to
force a specific set of connectors on or off. Try to remedy that by
dropping back to the old behavior if we detect a hard coded connector
config that tries to enable a connector (disabling is easy!).
Based on earlier patches by Jesse Barnes.
v2: Remove Jesse's patch
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Mon, 18 Aug 2014 17:35:28 +0000 (10:35 -0700)]
drm/i915: Don't save/restore RS when not used
v2: fix conflict on rebase.
Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Mon, 18 Aug 2014 17:35:27 +0000 (10:35 -0700)]
drm/i915: Bring UP Power Wells before disabling RC6.
We need do forcewake before Disabling RC6, This is what the BIOS
expects while going into suspend.
v2: updated commit message. (Daniel)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Deepak S <deepak.s@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Mon, 18 Aug 2014 12:51:00 +0000 (13:51 +0100)]
drm/i915: Print the pipe on which the vblank wait times out
Improve the debug message that tells us we've been waiting for a vblank
that never arrived. Printing the pipe could lead a "doh!" moment where
we've been waiting for a vblank on a pipe that was off for instance.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Thomas Wood <thomas.wood@intel.com>
[danvet: Polish commit message a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Mon, 18 Aug 2014 12:49:10 +0000 (13:49 +0100)]
drm/i915: Use dev_priv as first argument of for_each_pipe()
Chris has decided that enough is enough. It's time to fixup dev Vs
dev_priv. This is a modest contribution to the crusade.
v2: Still use INTEL_INFO(), for the (mythical!) case we want to hardcode
the info struct with defines (Chris)
Rename the macro argument from 'dev' to 'dev_priv' (Jani)
v3: Use names unlikely to be used as macro arguments (Chris)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 22 Aug 2014 12:06:35 +0000 (15:06 +0300)]
drm/i915: don't check for i830 in vlv specific code
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:43 +0000 (17:04 +0100)]
drm/i915/bdw: Make sure error capture keeps working with Execlists
Since the ringbuffer does not belong per engine anymore, we have to
make sure that we are always recording the correct ringbuffer.
TODO: This is only a small fix to keep basic error capture working, but
we need to add more information for it to be useful (e.g. dump the
context being executed).
v2: Reorder how the ringbuffer is chosen to clarify the change and
rename the variable, both changes suggested by Chris Wilson. Also,
add the TODO comment to the code, as suggested by Daniel.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 12 Aug 2014 19:05:50 +0000 (20:05 +0100)]
drm/i915: Suppress a WARN on reading an object back for a GPU hang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 12 Aug 2014 19:05:49 +0000 (20:05 +0100)]
drm/i915: Remove num_pages parameter to i915_error_object_create()
For cleanliness, i915_error_object_create() was written to handle the
NULL pointer in a central location. The macro that wrapped it and passed
it a num_pages to use, was not safe. As we now never limit the num_pages
to use (we did so at one point to only capture the first page of the
context), we can remove the redundant macro and be NULL safe again.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 12 Aug 2014 19:05:48 +0000 (20:05 +0100)]
drm/i915: Do not access stolen memory directly by the CPU, even for error capture
For stolen pages, since it is verboten to access them directly on many
architectures, we have to read them through the GTT aperture. If they
are not accessible through the aperture, then we have to abort.
This was complicated by
commit
8b6124a633d8095b0c8364f585edff9c59568a96
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jan 30 14:38:16 2014 +0000
drm/i915: Don't access snooped pages through the GTT (even for error capture)
and the desire to use stolen memory for ringbuffers, contexts and
batches in the future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 12 Aug 2014 14:11:42 +0000 (17:11 +0300)]
drm/i915: switch off backlight for backlight class 0 brightness
Make backlight class sysfs brightness 0 value switch off the backlight
for connectors that have the backlight_power callback defined. For eDP,
this has the similar caveats regarding power savings as bl_power as only
the power sequencer backlight control is switched off.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed_by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 12 Aug 2014 14:11:41 +0000 (17:11 +0300)]
drm/i915/dp: make backlight bl_power control power sequencer backlight
This lets the userspace switch off the backlight using the backlight
class sysfs bl_power file. The switch is done using the power sequencer;
the backlight PWM, and everything else, remains enabled. The display
backlight won't draw power, but for maximum power savings the encoder
needs to be switched off.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed_by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Tested_by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 13 Aug 2014 09:10:12 +0000 (12:10 +0300)]
drm/i915: add some framework for backlight bl_power support
Make backlight class sysfs bl_power a sub-state of backlight enabled, if
a backlight power connector callback is defined. It's up to the
connector callback to handle the sub-state, typically in a way that
respects panel power sequencing.
v2: Post the version that does not oops. *facepalm*.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed_by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Tested_by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 12 Aug 2014 14:11:39 +0000 (17:11 +0300)]
drm/i915/dp: split up panel power control from backlight pwm control
Make it possible to change panel power control backlight state without
touching the PWM. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed_by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Tested_by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 1 Aug 2014 21:14:48 +0000 (18:14 -0300)]
drm/i915: fix i915_frequency_info on BDW
The GEN6_PM* registers don't exist on BDW anymore, so when we read
this file we trigger unclaimed register errors. The equivalent BDW
register for PMs is GEN8_GT_I*R(2), so use it.
Testcase: igt/pm_rpm/debugfs-read
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sonika Jindal [Fri, 22 Aug 2014 08:36:04 +0000 (14:06 +0530)]
drm/i915: Add 180 degree primary plane rotation support
Primary planes support 180 degree rotation. Expose the feature
through rotation drm property.
v2: Calculating linear/tiled offsets based on pipe source width and
height. Added 180 degree rotation support in ironlake_update_plane.
v3: Checking if CRTC is active before issueing update_plane. Added
wait for vblank to make sure we dont overtake page flips. Disabling
FBC since it does not work with rotated planes.
v4: Updated rotation checks for pending flips, fbc disable. Creating
rotation property only for Gen4 onwards. Property resetting as part
of lastclose.
v5: Resetting property in i915_driver_lastclose properly for planes
and crtcs. Fixed linear offset calculation that was off by 1 w.r.t
width in i9xx_update_plane and ironlake_update_plane. Removed tab
based indentation and unnecessary braces in intel_crtc_set_property
and intel_update_fbc. FBC and flip related checks should be done only
for valid crtcs.
v6: Minor nits in FBC disable checks for comments in intel_crtc_set_property
and positioning the disable code in intel_update_fbc.
v7: In case rotation property on inactive crtc is updated, we return
successfully printing debug log as crtc is inactive and only property change
is preserved.
v8: update_plane is changed to update_primary_plane, crtc->fb is changed to
crtc->primary->fb and return value of update_primary_plane is ignored.
v9: added rotation property to primary plane instead of crtc. Removing reset
of rotation property from lastclose. rotation_property is moved to
drm_mode_config, so drm layer will take care of resetting. Adding updation of
fbc when rotation is set to 0. Allowing rotation only if value is
different than old one.
v10: Calling intel_primary_plane_setplane instead of update_primary_plane in
set_property(Daniel).
v11: Using same set_property function for both primary and sprite, Adding
primary plane specific code in the same function (Matt).
v12: Removing disabling/ enabling of fbc from set_property because it is done
from intel_pipe_set_base. Other formatting
v13: we need to call disable_fbc before changing the rotation to 180,
disable_fbc from intel_pipe_set_base gets called very late, that will
be used to re-enable fbc if rotation is set to 0 (Ville).
Testcase: igt/kms_rotation_crc
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
[danvet: Add FIXME to explain why we need the open-coded update_fbc
hunk to disable fbc when rotated 180 degree. And make checkpatch
happier.]
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sonika Jindal [Thu, 21 Aug 2014 06:14:39 +0000 (11:44 +0530)]
drm/i915: Updating plane parameters for primary plane in setplane
This unifies how the primary plane functions work with how the sprite
functions works, which allows us to reuse them to update primary plane
properties.
v2: Moving setting of plane members in the end to take care of failure cases and
not-visible cases (Matt).
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
[danvet: Add a real commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
McAulay, Alistair [Fri, 15 Aug 2014 17:51:35 +0000 (18:51 +0100)]
drm/i915: Rework GPU reset sequence to match driver load & thaw
This patch is to address Daniels concerns over different code during reset:
http://lists.freedesktop.org/archives/intel-gfx/2014-June/047758.html
"The reason for aiming as hard as possible to use the exact same code for
driver load, gpu reset and runtime pm/system resume is that we've simply
seen too many bugs due to slight variations and unintended omissions."
Tested using igt drv_hangman.
V2: Cleaner way of preventing check_wedge returning -EAGAIN
V3: Clean the last_context during reset, to ensure do_switch() does the MI_SET_CONTEXT. As per review.
Signed-off-by: McAulay, Alistair <alistair.mcaulay@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Rebase over ctx->ppgtt rework and extend the comment in
check_wedge a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Andreas Pokorny [Fri, 8 Aug 2014 08:40:56 +0000 (10:40 +0200)]
drm/qxl: enables gem prime helpers for qxl using dummy driver callbacks
As there should not be any other virtual device that might share buffers,
the callbacks remain empty stubs. Still prime can be used to transfer buffers
between processes that use qxl.
Signed-off-by: Andreas Pokorny <andreas.pokorny@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Andreas Pokorny [Fri, 8 Aug 2014 08:40:55 +0000 (10:40 +0200)]
drm/qxl: simple crtc page flipping emulated using buffer copy
Signed-off-by: Andreas Pokorny <andreas.pokorny@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 3 Sep 2014 00:12:24 +0000 (10:12 +1000)]
Merge branch 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux into drm-next
Merge the move to generic fences for TTM using drivers.
* 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux:
drm/nouveau: use shared fences for readable objects
drm/nouveau: Keep only a single list for validation.
drm/ttm: use rcu in core ttm
drm/vmwgfx: use rcu in vmw_user_dmabuf_synccpu_grab
drm/radeon: use rcu waits in some ioctls
drm/nouveau: use rcu in nouveau_gem_ioctl_cpu_prep
drm/ttm: flip the switch, and convert to dma_fence
drm/qxl: rework to new fence interface
drm/nouveau: rework to new fence interface
drm/vmwgfx: rework to new fence interface, v2
drm/vmwgfx: get rid of different types of fence_flags entirely
drm/radeon: use common fence implementation for fences, v4
drm/ttm: kill off some members to ttm_validate_buffer
drm/ttm: add interruptible parameter to ttm_eu_reserve_buffers
drm/ttm: kill fence_lock
drm/ttm: call ttm_bo_wait while inside a reservation
drm/nouveau: require reservations for nouveau_fence_sync and nouveau_bo_fence
drm/nouveau: add reservation to nouveau_gem_ioctl_cpu_prep
Dave Airlie [Tue, 2 Sep 2014 22:30:48 +0000 (08:30 +1000)]
Merge tag 'drm-intel-next-2014-09-01' of git://anongit.freedesktop.org/drm-intel into drm-next
drm-intel-next-2014-08-22:
- basic code for execlist, which is the fancy new cmd submission on gen8. Still
disabled by default (Ben, Oscar Mateo, Thomas Daniel et al)
- remove the useless usage of console_lock for I915_FBDEV=n (Chris)
- clean up relations between ctx and ppgtt
- clean up ppgtt lifetime handling (Michel Thierry)
- various cursor code improvements from Ville
- execbuffer code cleanups and secure batch fixes (Chris)
- prep work for dev -> dev_priv transition (Chris)
- some of the prep patches for the seqno -> request object transition (Chris)
- various small improvements all over
* tag 'drm-intel-next-2014-09-01' of git://anongit.freedesktop.org/drm-intel: (86 commits)
drm/i915: fix suspend/resume for GENs w/o runtime PM support
drm/i915: Update DRIVER_DATE to
20140822
drm: fix plane rotation when restoring fbdev configuration
drm/i915/bdw: Disable execlists by default
drm/i915/bdw: Enable Logical Ring Contexts (hence, Execlists)
drm/i915/bdw: Document Logical Rings, LR contexts and Execlists
drm/i915/bdw: Print context state in debugfs
drm/i915/bdw: Display context backing obj & ringbuffer info in debugfs
drm/i915/bdw: Display execlists info in debugfs
drm/i915/bdw: Disable semaphores for Execlists
drm/i915/bdw: Make sure gpu reset still works with Execlists
drm/i915/bdw: Don't write PDP in the legacy way when using LRCs
drm/i915: Track cursor changes as frontbuffer tracking flushes
drm/i915/bdw: Help out the ctx switch interrupt handler
drm/i915/bdw: Avoid non-lite-restore preemptions
drm/i915/bdw: Handle context switch events
drm/i915/bdw: Two-stage execlist submit process
drm/i915/bdw: Write the tail pointer, LRC style
drm/i915/bdw: Implement context switching (somewhat)
drm/i915/bdw: Emission of requests with logical rings
...
Conflicts:
drivers/gpu/drm/i915/i915_drv.c
Maarten Lankhorst [Wed, 9 Apr 2014 14:19:30 +0000 (16:19 +0200)]
drm/nouveau: use shared fences for readable objects
nouveau keeps track in userspace whether a buffer is being
written to or being read, but it doesn't use that information.
Change this to allow multiple readers on the same bo.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Lankhorst [Wed, 9 Apr 2014 14:18:58 +0000 (16:18 +0200)]
drm/nouveau: Keep only a single list for validation.
Maintain the original order to handle VRAM/GART/mixed correctly for <nv50,
it's likely not as important on newer cards.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Lankhorst [Wed, 14 May 2014 13:42:29 +0000 (15:42 +0200)]
drm/ttm: use rcu in core ttm
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Wed, 14 May 2014 13:41:49 +0000 (15:41 +0200)]
drm/vmwgfx: use rcu in vmw_user_dmabuf_synccpu_grab
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Wed, 14 May 2014 13:40:49 +0000 (15:40 +0200)]
drm/radeon: use rcu waits in some ioctls
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Maarten Lankhorst [Wed, 14 May 2014 13:38:23 +0000 (15:38 +0200)]
drm/nouveau: use rcu in nouveau_gem_ioctl_cpu_prep
With the conversion to the reservation api this should be safe.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Lankhorst [Wed, 2 Apr 2014 15:14:48 +0000 (17:14 +0200)]
drm/ttm: flip the switch, and convert to dma_fence
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Wed, 2 Apr 2014 10:40:05 +0000 (12:40 +0200)]
drm/qxl: rework to new fence interface
Final driver! \o/
This is not a proper dma_fence because the hardware may never signal
anything, so don't use dma-buf with qxl, ever.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Thu, 9 Jan 2014 10:03:11 +0000 (11:03 +0100)]
drm/nouveau: rework to new fence interface
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Lankhorst [Wed, 26 Mar 2014 13:07:44 +0000 (14:07 +0100)]
drm/vmwgfx: rework to new fence interface, v2
Use the new fence interface on vmwgfx too.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
---
Changes since v1:
Fix a sleeping function called from invalid context in enable_signaling.
Maarten Lankhorst [Wed, 26 Mar 2014 12:06:24 +0000 (13:06 +0100)]
drm/vmwgfx: get rid of different types of fence_flags entirely
Only one type was ever used. This is needed to simplify the fence
support in the next commit.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Thu, 9 Jan 2014 10:03:12 +0000 (11:03 +0100)]
drm/radeon: use common fence implementation for fences, v4
Changes since v1:
- Kill the sw interrupt dance, add and use
radeon_irq_kms_sw_irq_get_delayed instead.
- Change custom wait function, lockdep complained about it.
Holding exclusive_lock in the wait function might cause deadlocks.
Instead do all the processing in .enable_signaling, and wait
on the global fence_queue to pick up gpu resets.
- Process all fences in radeon_gpu_reset after reset to close a race
with the trylock in enable_signaling.
Changes since v2:
- Small changes to work with the rewritten lockup recovery patches.
Changes since v3:
- Call radeon_fence_schedule_check when exclusive_lock cannot be
acquired to always cause a wake up.
- Reset irqs from hangup check.
- Drop reading seqno in the callback, use cached value.
- Fix indentation in radeon_fence_default_wait
- Add a radeon_test_signaled function, drop a few test_bit calls.
- Make to_radeon_fence global.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Maarten Lankhorst [Thu, 9 Jan 2014 10:03:08 +0000 (11:03 +0100)]
drm/ttm: kill off some members to ttm_validate_buffer
This reorders the list to keep track of what buffers are reserved,
so previous members are always unreserved.
This gets rid of some bookkeeping that's no longer needed,
while simplifying the code some.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Thu, 9 Jan 2014 10:03:08 +0000 (11:03 +0100)]
drm/ttm: add interruptible parameter to ttm_eu_reserve_buffers
It seems some drivers really want this as a parameter,
like vmwgfx.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Tue, 21 Jan 2014 12:07:31 +0000 (13:07 +0100)]
drm/ttm: kill fence_lock
No users are left, kill it off! :D
Conversion to the reservation api is next on the list, after
that the functionality can be restored with rcu.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Tue, 21 Jan 2014 12:07:01 +0000 (13:07 +0100)]
drm/ttm: call ttm_bo_wait while inside a reservation
This is the last remaining function that doesn't use the reservation
lock completely to fence off access to a buffer.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Tue, 21 Jan 2014 12:02:14 +0000 (13:02 +0100)]
drm/nouveau: require reservations for nouveau_fence_sync and nouveau_bo_fence
This will ensure we always hold the required lock when calling those functions.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Lankhorst [Tue, 21 Jan 2014 12:00:24 +0000 (13:00 +0100)]
drm/nouveau: add reservation to nouveau_gem_ioctl_cpu_prep
Apart from some code inside ttm itself and nouveau_bo_vma_del,
this is the only place where ttm_bo_wait is used without a reservation.
Fix this so we can remove the fence_lock later on.
After the switch to rcu the reservation lock will be
removed again.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Thu, 28 Aug 2014 03:45:45 +0000 (13:45 +1000)]
Merge branch 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-next
Just clearing out my -next queue before I go on vacation. Two UVD
improvements that depend on the ttm change you just merged.
* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: preallocate mem for UVD create/destroy msg
drm/radeon: allow UVD to use a second 256MB segment
Christian König [Fri, 22 Aug 2014 12:25:55 +0000 (14:25 +0200)]
drm/radeon: preallocate mem for UVD create/destroy msg
llocating memory for UVD create and destroy messages can fail, which is
rather annoying when this happens in the middle of a GPU reset. Try to
avoid this condition by preallocating a page for those dummy messages.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 21 Aug 2014 10:18:12 +0000 (12:18 +0200)]
drm/radeon: allow UVD to use a second 256MB segment
This improves concurrent stream decoding.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 28 Aug 2014 01:39:11 +0000 (11:39 +1000)]
Merge branch 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-next
More radeon changes for drm-next. Highlights:
- UVD support for older asics
- Reset rework in preparation for Maarten's fence patches
I have a few more patches which depend on Christian's ttm changes,
I'll send them out separately once you've merged the ttm changes.
* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: drop doing resets in a work item
drm/radeon: drop RADEON_FENCE_SIGNALED_SEQ v2
drm/radeon: add timeout argument to radeon_fence_wait_seq v2
drm/radeon: handle lockup in delayed work, v5
drm/radeon: take exclusive_lock in read mode during ring tests, v5
drm/radeon: force fence completion only on problematic rings (v2)
drm/radeon: wake up all fences on manual reset
drm/radeon: add UVD fw names for older asic
drm/radeon: enable RB_ARB before resetting the VCPU
drm/radeon: 760G/780V/880V don't have UVD
drm/radeon: implement UVD hw workarounds for R6xx v3
drm/radeon: add UVD support for older asics v4
drm/radeon: add set_uvd_clocks callback for r6xx v4
drm/radeon: properly init UVD MC bits on R600
drm/radeon: force UVD buffers into VRAM on RS[78]80 v2
drm/radeon: move the IB test after the AGP fallback
Dave Airlie [Thu, 28 Aug 2014 01:34:48 +0000 (11:34 +1000)]
Merge branch 'ttm_pfn' of git://people.freedesktop.org/~deathsimple/linux into drm-next
pull in placement changes radeon requires.
* 'ttm_pfn' of git://people.freedesktop.org/~deathsimple/linux:
drm/ttm: move fpfn and lpfn into each placement v2
Christian König [Wed, 27 Aug 2014 13:22:01 +0000 (15:22 +0200)]
drm/radeon: drop doing resets in a work item
Blocking completely innocent processes with a GPU reset is
a pretty bad idea. Just set needs_reset and let the next
command submission or fence wait do the job.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 27 Aug 2014 13:22:00 +0000 (15:22 +0200)]
drm/radeon: drop RADEON_FENCE_SIGNALED_SEQ v2
It's causing issues with VMID handling and comparing the
fence value two times actually doesn't make handling faster.
v2: rebased on reset changes
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maarten Lankhorst [Wed, 27 Aug 2014 13:21:59 +0000 (15:21 +0200)]
drm/radeon: add timeout argument to radeon_fence_wait_seq v2
This makes it possible to wait for a specific amount of time,
rather than wait until infinity.
v2 (chk): rebased on other changes
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 27 Aug 2014 13:21:58 +0000 (15:21 +0200)]
drm/radeon: handle lockup in delayed work, v5
v5 (chk): complete rework, start when the first fence is emitted,
stop when the last fence is signalled, make it work
correctly with GPU resets, cleanup radeon_fence_wait_seq
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maarten Lankhorst [Wed, 27 Aug 2014 20:45:18 +0000 (16:45 -0400)]
drm/radeon: take exclusive_lock in read mode during ring tests, v5
This is needed for the next commit, because the lockup detection
will need the read lock to run.
v4 (chk): split out forced fence completion, remove unrelated changes,
add and handle in_reset flag
v5 (agd5f): rebase fix
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 27 Aug 2014 13:21:56 +0000 (15:21 +0200)]
drm/radeon: force fence completion only on problematic rings (v2)
Instead of resetting all fence numbers, only reset the
number of the problematic ring. Split out from a patch
from Maarten Lankhorst <maarten.lankhorst@canonical.com>
v2 (agd5f): rebase build fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 27 Aug 2014 13:21:53 +0000 (15:21 +0200)]
drm/radeon: wake up all fences on manual reset
Wake up all fences when we manually trigger a reset.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 16 Apr 2013 20:11:37 +0000 (22:11 +0200)]
drm/radeon: add UVD fw names for older asic
Activating the UVD support.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 27 Aug 2014 07:59:45 +0000 (09:59 +0200)]
drm/radeon: enable RB_ARB before resetting the VCPU
This fixes "UVD not responding, trying to reset the VCPU"
messages on earlier ASICs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 26 Aug 2014 17:11:36 +0000 (13:11 -0400)]
drm/radeon: 760G/780V/880V don't have UVD
Don't enable UVD on these asics as they don't have
UVD hardware.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 25 Apr 2013 07:02:14 +0000 (09:02 +0200)]
drm/radeon: implement UVD hw workarounds for R6xx v3
Only the essentials, cause this hw generation is really buggy.
v2: start supporting RV670,RV620 and RV635 as well
v3: activate more workarounds
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 16 Apr 2013 20:11:22 +0000 (22:11 +0200)]
drm/radeon: add UVD support for older asics v4
v2: cleanup R600 support
v3: rebased on current drm-fixes-3.12
v4: rebased on drm-next-3.14
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 28 Nov 2012 21:55:21 +0000 (16:55 -0500)]
drm/radeon: add set_uvd_clocks callback for r6xx v4
v2: wake up PLL, set [VD]CLK_SRC, cleanup code
v3: handle RV670,RV635,RV620 as well
v4: merge rv6xx and rs780/rs880 code, fix ref divider mask
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Christian König [Thu, 25 Apr 2013 16:54:07 +0000 (18:54 +0200)]
drm/radeon: properly init UVD MC bits on R600
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 16 Apr 2013 13:41:25 +0000 (15:41 +0200)]
drm/radeon: force UVD buffers into VRAM on RS[78]80 v2
v2: only necessary on RS[78]80
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sun, 24 Aug 2014 12:52:46 +0000 (14:52 +0200)]
drm/radeon: move the IB test after the AGP fallback
Otherwise we won't test if the fallback to PCIe GART really worked.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 27 Aug 2014 11:16:04 +0000 (13:16 +0200)]
drm/ttm: move fpfn and lpfn into each placement v2
This allows us to more fine grained specify where to place the buffer object.
v2: rebased on drm-next, add bochs changes as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Imre Deak [Tue, 26 Aug 2014 10:26:56 +0000 (13:26 +0300)]
drm/i915: fix suspend/resume for GENs w/o runtime PM support
Before sharing common parts between the system and runtime s/r
handlers we WARNed if the runtime s/r handlers were called on GENs that
didn't support RPM. But this WARN is not correct if the same handler is
called from the system s/r path, since that can happen on any platform.
This also broke system s/r on old platforms.
The issue was introduced in
commit
016970beb05da6285c2f3ed2bee1c676cb75972e
Author: Sagar Kamble <sagar.a.kamble@intel.com>
Date: Wed Aug 13 23:07:06 2014 +0530
v2:
- remove the WARN and depend on the HAS_RUNTIME_PM check in
rutime_suspend/resume instead (Daniel)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82751
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Mon, 25 Aug 2014 23:05:14 +0000 (09:05 +1000)]
Merge branch 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-next
radeon userptr support.
* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: allow userptr write access under certain conditions
drm/radeon: add userptr flag to register MMU notifier v3
drm/radeon: add userptr flag to directly validate the BO to GTT
drm/radeon: add userptr flag to limit it to anonymous memory v2
drm/radeon: add userptr support v8
Conflicts:
drivers/gpu/drm/radeon/radeon_prime.c
Dave Airlie [Mon, 25 Aug 2014 23:04:32 +0000 (09:04 +1000)]
Merge tag 'drm-intel-next-2014-08-08' of git://anongit.freedesktop.org/drm-intel into drm-next
- Setting dp M2/N2 values plus state checker support (Vandana Kannan)
- chv power well support (Ville)
- DP training pattern 3 support for chv (Ville)
- cleanup of the hsw/bdw ddi pll code, prep work for skl (Damien)
- dsi video burst mode support (Shobhit)
- piles of other chv fixes all over (Ville et. al.)
- cleanup of the ddi translation tables setup code (Damien)
- 180 deg rotation support (Ville & Sonika Jindal)
* tag 'drm-intel-next-2014-08-08' of git://anongit.freedesktop.org/drm-intel: (59 commits)
drm/i915: Update DRIVER_DATE to
20140808
drm/i915: No busy-loop wait_for in the ring init code
drm/i915: Add sprite watermark programming for VLV and CHV
drm/i915: Round-up clock and limit drain latency
drm/i915: Generalize drain latency computation
drm/i915: Free pending page flip events at .preclose()
drm/i915: clean up PPGTT checking logic
drm/i915: Polish the chv cmnlane resrt macros
drm/i915: Hack to tie both common lanes together on chv
drm/i915: Add cherryview_update_wm()
drm/i915: Update DDL only for current CRTC
drm/i915: Parametrize VLV_DDL registers
drm/i915: Fill out the FWx watermark register defines
drm: Resetting rotation property
drm/i915: Add rotation property for sprites
drm: Add rotation_property to mode_config
drm/i915: Make intel_plane_restore() return an error
drm/i915: Add 180 degree sprite rotation support
drm/i915: Introduce a for_each_intel_encoder() macro
drm/i915: Demote the DRRS messages to debug messages
...
Dave Airlie [Mon, 25 Aug 2014 23:04:03 +0000 (09:04 +1000)]
Merge tag 'topic/core-stuff-2014-08-15' of git://anongit.freedesktop.org/drm-intel into drm-next
So small drm stuff all over for 3.18. Biggest one is the cmdline parsing
from Chris with a few fixes from me to make it work for stupid kernel
configs.
Plus the atomic prep series.
Tested for more than a week in -nightly and Ville/Imre indeed discovered
some fun which is now fixed (and i915 vblank patches postponed since the
fixups need this branch plus drm-intel-next merged together).
* tag 'topic/core-stuff-2014-08-15' of git://anongit.freedesktop.org/drm-intel:
drm: Use the type of the array element when reallocating
drm: Don't return 0 for a value used as a denominator
drm: Docbook fixes
drm/irq: Implement a generic vblank_wait function
drm: Add a plane->reset hook
drm: trylock modest locking for fbdev panics
drm: Move ->old_fb from crtc to plane
drm: Handle legacy per-crtc locking with full acquire ctx
drm: Move modeset_lock_all helpers to drm_modeset_lock.[hc]
drm: Add drm_plane/connector_index
drm: idiot-proof vblank
drm: Warn when leaking flip events on close
drm: Perform cmdline mode parsing during connector initialisation
video/fbdev: Always built-in video= cmdline parsing
drm: Don't grab an fb reference for the idr
Linus Torvalds [Mon, 25 Aug 2014 22:36:20 +0000 (15:36 -0700)]
Linux 3.17-rc2
Linus Torvalds [Mon, 25 Aug 2014 22:34:28 +0000 (15:34 -0700)]
Merge tag 'nfs-for-3.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights:
- more fixes for read/write codepath regressions
* sleeping while holding the inode lock
* stricter enforcement of page contiguity when coalescing requests
* fix up error handling in the page coalescing code
- don't busy wait on SIGKILL in the file locking code"
* tag 'nfs-for-3.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Don't busy-wait on SIGKILL in __nfs_iocounter_wait
nfs: can_coalesce_requests must enforce contiguity
nfs: disallow duplicate pages in pgio page vectors
nfs: don't sleep with inode lock in lock_and_join_requests
nfs: fix error handling in lock_and_join_requests
nfs: use blocking page_group_lock in add_request
nfs: fix nonblocking calls to nfs_page_group_lock
nfs: change nfs_page_group_lock argument
Linus Torvalds [Mon, 25 Aug 2014 22:29:33 +0000 (15:29 -0700)]
Merge tag 'renesas-sh-drivers-for-v3.17' of git://git./linux/kernel/git/horms/renesas
Pull SH driver fix from Simon Horman:
"Confine SH_INTC to platforms that need it"
* tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
sh: intc: Confine SH_INTC to platforms that need it
Linus Torvalds [Mon, 25 Aug 2014 22:28:57 +0000 (15:28 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Pretty much all across the field so with this we should be in
reasonable shape for the upcoming -rc2"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: OCTEON: make get_system_type() thread-safe
MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores
MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init'
MIPS: EVA: Add new EVA header
MIPS: scall64-o32: Fix indirect syscall detection
MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64
MIPS: Loongson: Fix COP2 usage for preemptible kernel
MIPS: NL: Fix nlm_xlp_defconfig build error
MIPS: Remove race window in page fault handling
MIPS: Malta: Improve system memory detection for '{e, }memsize' >= 2G
MIPS: Alchemy: Fix db1200 PSC clock enablement
MIPS: BCM47XX: Fix reboot problem on BCM4705/BCM4785
MIPS: Remove duplicated include from numa.c
MIPS: Add common plat_irq_dispatch declaration
MIPS: MSP71xx: remove unused plat_irq_dispatch() argument
MIPS: GIC: Remove useless parens from GICBIS().
MIPS: perf: Mark pmu interupt IRQF_NO_THREAD
Linus Torvalds [Mon, 25 Aug 2014 22:11:53 +0000 (15:11 -0700)]
Merge tag 'trace-fixes-v3.17-rc1' of git://git./linux/kernel/git/rostedt/linux-trace
Pull fix for ftrace function tracer/profiler conflict from Steven Rostedt:
"The rewrite of the ftrace code that makes it possible to allow for
separate trampolines had a design flaw with the interaction between
the function and function_graph tracers.
The main flaw was the simplification of the use of multiple tracers
having the same filter (like function and function_graph, that use the
set_ftrace_filter file to filter their code). The design assumed that
the two tracers could never run simultaneously as only one tracer can
be used at a time. The problem with this assumption was that the
function profiler could be implemented on top of the function graph
tracer, and the function profiler could run at the same time as the
function tracer. This caused the assumption to be broken and when
ftrace detected this failed assumpiton it would spit out a nasty
warning and shut itself down.
Instead of using a single ftrace_ops that switches between the
function and function_graph callbacks, the two tracers can again use
their own ftrace_ops. But instead of having a complex hierarchy of
ftrace_ops, the filter fields are placed in its own structure and the
ftrace_ops can carefully use the same filter. This change took a bit
to be able to allow for this and currently only the global_ops can
share the same filter, but this new design can easily be modified to
allow for any ftrace_ops to share its filter with another ftrace_ops.
The first four patches deal with the change of allowing the ftrace_ops
to share the filter (and this needs to go to 3.16 as well).
The fifth patch fixes a bug that was also caused by the new changes
but only for archs other than x86, and only if those archs implement a
direct call to the function_graph tracer which they do not do yet but
will in the future. It does not need to go to stable, but needs to be
fixed before the other archs update their code to allow direct calls
to the function_graph trampoline"
* tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Use current addr when converting to nop in __ftrace_replace_code()
ftrace: Fix function_profiler and function tracer together
ftrace: Fix up trampoline accounting with looping on hash ops
ftrace: Update all ftrace_ops for a ftrace_hash_ops update
ftrace: Allow ftrace_ops to use the hashes from other ops
Linus Torvalds [Sun, 24 Aug 2014 23:17:41 +0000 (16:17 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"A couple of EFI fixes, plus misc fixes all around the map"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm64: Store Runtime Services revision
firmware: Do not use WARN_ON(!spin_is_locked())
x86_32, entry: Clean up sysenter_badsys declaration
x86/doc: Fix the 'tlb_single_page_flush_ceiling' sysconfig path
x86/mm: Fix sparse 'tlb_single_page_flush_ceiling' warning and make the variable read-mostly
x86/mm: Fix RCU splat from new TLB tracepoints
Linus Torvalds [Sun, 24 Aug 2014 23:16:55 +0000 (16:16 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A kprobes and a perf compat ioctl fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Handle compat ioctl
kprobes: Skip kretprobe hit in NMI context to avoid deadlock
Linus Torvalds [Sun, 24 Aug 2014 22:57:00 +0000 (15:57 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes from this week, it's been pretty quiet and
nothing really stands out as particularly noteworthy here -- mostly
minor fixes across the field:
- ODROID booting was fixed due to PMIC interrupts missing in DT
- a collection of i.MX fixes
- minor Tegra fix for regulators
- Rockchip fix and addition of SoC-specific mailing list to make it
easier to find posted patches"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
bus: arm-ccn: Fix warning message
ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux
ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies
MAINTAINERS: add new Rockchip SoC list
ARM: dts: rockchip: readd missing mmc0 pinctrl settings
ARM: dts: ODROID i2c improvements
ARM: dts: Enable PMIC interrupts on ODROID
ARM: dts: imx6sx: fix the pad setting for uart CTS_B
ARM: dts: i.MX53: fix apparent bug in VPU clks
ARM: imx: correct gpu2d_axi and gpu3d_axi clock setting
ARM: dts: imx6: edmqmx6: change enet reset pin
ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions.
ARM: imx: remove unnecessary ARCH_HAS_OPP select
ARM: imx: fix TLB missing of IOMUXC base address during suspend
ARM: imx6: fix SMP compilation again
ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
Linus Torvalds [Sun, 24 Aug 2014 22:54:23 +0000 (15:54 -0700)]
Merge tag 'gpio-v3.17-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull gpio fixes from Linus Walleij:
- a largeish fix for the IRQ handling in the new Zynq driver. The
quite verbose commit message gives the exact details.
- move some defines for gpiod flags outside an ifdef to make stub
functions work again.
- various minor fixes that we can accept for -rc1.
* tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio-lynxpoint: enable input sensing in resume
gpio: move GPIOD flags outside #ifdef
gpio: delete unneeded test before of_node_put
gpio: zynq: Fix IRQ handlers
gpiolib: devres: use correct structure type name in sizeof
MAINTAINERS: Change maintainer for gpio-bcm-kona.c
Linus Torvalds [Sun, 24 Aug 2014 22:48:12 +0000 (15:48 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Intel and radeon fixes.
Post KS/LC git requests from i915 and radeon stacked up. They are all
fixes along with some new pci ids for radeon, and one maintainers file
entry.
- i915: display fixes and irq fixes
- radeon: pci ids, and misc gpuvm, dpm and hdp cache"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits)
MAINTAINERS: Add entry for Renesas DRM drivers
drm/radeon: add additional SI pci ids
drm/radeon: add new bonaire pci ids
drm/radeon: add new KV pci id
Revert "drm/radeon: Use write-combined CPU mappings of ring buffers with PCIe"
drm/radeon: fix active_cu mask on SI and CIK after re-init (v3)
drm/radeon: fix active cu count for SI and CIK
drm/radeon: re-enable selective GPUVM flushing
drm/radeon: Sync ME and PFP after CP semaphore waits v4
drm/radeon: fix display handling in radeon_gpu_reset
drm/radeon: fix pm handling in radeon_gpu_reset
drm/radeon: Only flush HDP cache for indirect buffers from userspace
drm/radeon: properly document reloc priority mask
drm/i915: don't try to retrain a DP link on an inactive CRTC
drm/i915: make sure VDD is turned off during system suspend
drm/i915: cancel hotplug and dig_port work during suspend and unload
drm/i915: fix HPD IRQ reenable work cancelation
drm/i915: take display port power domain in DP HPD handler
drm/i915: Don't try to enable cursor from setplane when crtc is disabled
drm/i915: Skip load detect when intel_crtc->new_enable==true
...
Benjamin LaHaise [Sun, 24 Aug 2014 17:14:05 +0000 (13:14 -0400)]
aio: fix reqs_available handling
As reported by Dan Aloni, commit
f8567a3845ac ("aio: fix aio request
leak when events are reaped by userspace") introduces a regression when
user code attempts to perform io_submit() with more events than are
available in the ring buffer. Reverting that commit would reintroduce a
regression when user space event reaping is used.
Fixing this bug is a bit more involved than the previous attempts to fix
this regression. Since we do not have a single point at which we can
count events as being reaped by user space and io_getevents(), we have
to track event completion by looking at the number of events left in the
event ring. So long as there are as many events in the ring buffer as
there have been completion events generate, we cannot call
put_reqs_available(). The code to check for this is now placed in
refill_reqs_available().
A test program from Dan and modified by me for verifying this bug is available
at http://www.kvack.org/~bcrl/
20140824-aio_bug.c .
Reported-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Acked-by: Dan Aloni <dan@kernelim.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: stable@vger.kernel.org # v3.16 and anything that f8567a3845ac was backported to
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pawel Moll [Mon, 18 Aug 2014 17:20:49 +0000 (18:20 +0100)]
bus: arm-ccn: Fix warning message
A message warning a user about wrong vc value was printing
out port instead.
Reported-by: Drew Richardson <drew.richardson@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Geert Uytterhoeven [Thu, 14 Aug 2014 22:19:10 +0000 (07:19 +0900)]
ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux
On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts
refers to non-existent pinmux configuration data:
pinmux core: sh-pfc does not support function i2c6
sh-pfc
e6060000.pfc: invalid function i2c6 in map table
Remove it to fix this.
Fixes: commit 1d41f36a68c0f4e9b01d563ce33bab5201858b54 ("ARM: shmobile:
koelsch dts: Add VDD MPU regulator for DVFS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Olof Johansson <olof@lixom.net>
Marcel Ziswiler [Fri, 22 Aug 2014 19:25:10 +0000 (13:25 -0600)]
ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies
Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised
that the current device tree source includes for our modules only
happen to work due to referencing the on-carrier 5v0 supply from USB
which is not at all available on-module. The modules actually contain
TPS60150 charge pumps to generate the PMIC required 5 volts from the
one and only 3.3 volt module supply. This patch fixes this.
(Note: When back-porting this to v3.16 stable releases, simply drop the
change to tegra30-apalis.dtsi; that file was added in v3.17)
Cc: <stable@vger.kernel.org> #v3.16+
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 24 Aug 2014 18:19:37 +0000 (11:19 -0700)]
Merge tag 'v3.17-rockchip-fixes1' of git://git./linux/kernel/git/mmind/linux-rockchip into fixes
Merge "ARM: rockchip: fix for 3.17" from Heiko Stubner:
Pinctrl that got accidentially dropped when reorganizing the
dts files and addition of the new Rockchip list to MAINTAINERS.
* tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
MAINTAINERS: add new Rockchip SoC list
ARM: dts: rockchip: readd missing mmc0 pinctrl settings
Signed-off-by: Olof Johansson <olof@lixom.net>
Laurent Pinchart [Tue, 19 Aug 2014 21:04:31 +0000 (23:04 +0200)]
MAINTAINERS: Add entry for Renesas DRM drivers
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Dave Airlie [Sun, 24 Aug 2014 05:47:46 +0000 (15:47 +1000)]
Merge branch 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux into drm-next
This pull just contains some new pci ids.
* 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add additional SI pci ids
drm/radeon: add new bonaire pci ids
drm/radeon: add new KV pci id
Heiko Stuebner [Wed, 20 Aug 2014 10:31:03 +0000 (12:31 +0200)]
MAINTAINERS: add new Rockchip SoC list
Add the new list that Rockchip-specific patches should also be directed to.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Heiko Stuebner [Mon, 11 Aug 2014 17:51:44 +0000 (19:51 +0200)]
ARM: dts: rockchip: readd missing mmc0 pinctrl settings
During the restructuring of the Rockchip Cortex-A9 dtsi files it seems
like the pinctrl settings vanished at some point from the mmc0 support.
This of course renders them unusable, so readd the necessary pinctrl
properties.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Olof Johansson [Sat, 23 Aug 2014 05:57:22 +0000 (22:57 -0700)]
Merge tag 'sunxi-dt-for-3.17-2' of git://git./linux/kernel/git/mripard/linux into fixes
Merge "Allwinner DT changes, take 2" from Maxime Ripard:
Only a single patch in here that fixes a DTC warning.
* tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Steven Rostedt (Red Hat) [Mon, 18 Aug 2014 00:59:10 +0000 (20:59 -0400)]
ftrace: Use current addr when converting to nop in __ftrace_replace_code()
In __ftrace_replace_code(), when converting the call to a nop in a function
it needs to compare against the "curr" (current) value of the ftrace ops, and
not the "new" one. It currently does not affect x86 which is the only arch
to do the trampolines with function graph tracer, but when other archs that do
depend on this code implement the function graph trampoline, it can crash.
Here's an example when ARM uses the trampolines (in the future):
------------[ cut here ]------------
WARNING: CPU: 0 PID: 9 at kernel/trace/ftrace.c:1716 ftrace_bug+0x17c/0x1f4()
Modules linked in: omap_rng rng_core ipv6
CPU: 0 PID: 9 Comm: migration/0 Not tainted
3.16.0-test-10959-gf0094b28f303-dirty #52
[<
c02188f4>] (unwind_backtrace) from [<
c021343c>] (show_stack+0x20/0x24)
[<
c021343c>] (show_stack) from [<
c095a674>] (dump_stack+0x78/0x94)
[<
c095a674>] (dump_stack) from [<
c02532a0>] (warn_slowpath_common+0x7c/0x9c)
[<
c02532a0>] (warn_slowpath_common) from [<
c02532ec>] (warn_slowpath_null+0x2c/0x34)
[<
c02532ec>] (warn_slowpath_null) from [<
c02cbac4>] (ftrace_bug+0x17c/0x1f4)
[<
c02cbac4>] (ftrace_bug) from [<
c02cc44c>] (ftrace_replace_code+0x80/0x9c)
[<
c02cc44c>] (ftrace_replace_code) from [<
c02cc658>] (ftrace_modify_all_code+0xb8/0x164)
[<
c02cc658>] (ftrace_modify_all_code) from [<
c02cc718>] (__ftrace_modify_code+0x14/0x1c)
[<
c02cc718>] (__ftrace_modify_code) from [<
c02c7244>] (multi_cpu_stop+0xf4/0x134)
[<
c02c7244>] (multi_cpu_stop) from [<
c02c6e90>] (cpu_stopper_thread+0x54/0x130)
[<
c02c6e90>] (cpu_stopper_thread) from [<
c0271cd4>] (smpboot_thread_fn+0x1ac/0x1bc)
[<
c0271cd4>] (smpboot_thread_fn) from [<
c026ddf0>] (kthread+0xe0/0xfc)
[<
c026ddf0>] (kthread) from [<
c020f318>] (ret_from_fork+0x14/0x20)
---[ end trace
dc9ce72c5b617d8f ]---
[ 65.047264] ftrace failed to modify [<
c0208580>] asm_do_IRQ+0x10/0x1c
[ 65.054070] actual: 85:1b:00:eb
Fixes: 7413af1fb70e7 "ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt (Red Hat) [Fri, 15 Aug 2014 21:18:46 +0000 (17:18 -0400)]
ftrace: Fix function_profiler and function tracer together
The latest rewrite of ftrace removed the separate ftrace_ops of
the function tracer and the function graph tracer and had them
share the same ftrace_ops. This simplified the accounting by removing
the multiple layers of functions called, where the global_ops func
would call a special list that would iterate over the other ops that
were registered within it (like function and function graph), which
itself was registered to the ftrace ops list of all functions
currently active. If that sounds confusing, the code that implemented
it was also confusing and its removal is a good thing.
The problem with this change was that it assumed that the function
and function graph tracer can never be used at the same time.
This is mostly true, but there is an exception. That is when the
function profiler uses the function graph tracer to profile.
The function profiler can be activated the same time as the function
tracer, and this breaks the assumption and the result is that ftrace
will crash (it detects the error and shuts itself down, it does not
cause a kernel oops).
To solve this issue, a previous change allowed the hash tables
for the functions traced by a ftrace_ops to be a pointer and let
multiple ftrace_ops share the same hash. This allows the function
and function_graph tracer to have separate ftrace_ops, but still
share the hash, which is what is done.
Now the function and function graph tracers have separate ftrace_ops
again, and the function tracer can be run while the function_profile
is active.
Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
David Jeffery [Tue, 5 Aug 2014 15:19:42 +0000 (11:19 -0400)]
nfs: Don't busy-wait on SIGKILL in __nfs_iocounter_wait
If a SIGKILL is sent to a task waiting in __nfs_iocounter_wait,
it will busy-wait or soft lockup in its while loop.
nfs_wait_bit_killable won't sleep, and the loop won't exit on
the error return.
Stop the busy-wait by breaking out of the loop when
nfs_wait_bit_killable returns an error.
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Weston Andros Adamson [Thu, 14 Aug 2014 21:39:33 +0000 (17:39 -0400)]
nfs: can_coalesce_requests must enforce contiguity
Commit
6094f83864c1d1296566a282cba05ba613f151ee
"nfs: allow coalescing of subpage requests" got rid of the requirement
that requests cover whole pages, but it made some incorrect assumptions.
It turns out that callers of this interface can map adjacent requests
(by file position as seen by req_offset + req->wb_bytes) to different pages,
even when they could share a page. An example is the direct I/O interface -
iov_iter_get_pages_alloc may return one segment with a partial page filled
and the next segment (which is adjacent in the file position) starts with a
new page.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Weston Andros Adamson [Thu, 14 Aug 2014 21:39:32 +0000 (17:39 -0400)]
nfs: disallow duplicate pages in pgio page vectors
Adjacent requests that share the same page are allowed, but should only
use one entry in the page vector. This avoids overruning the page
vector - it is sized based on how many bytes there are, not by
request count.
This fixes issues that manifest as "Redzone overwritten" bugs (the
vector overrun) and hangs waiting on page read / write, as it waits on
the same page more than once.
This also adds bounds checking to the page vector with a graceful failure
(WARN_ON_ONCE and pgio error returned to application).
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Weston Andros Adamson [Fri, 8 Aug 2014 15:00:57 +0000 (11:00 -0400)]
nfs: don't sleep with inode lock in lock_and_join_requests
This handles the 'nonblock=false' case in nfs_lock_and_join_requests.
If the group is already locked and blocking is allowed, drop the inode lock
and wait for the group lock to be cleared before trying it all again.
This should fix warnings found in peterz's tree (sched/wait branch), where
might_sleep() checks are added to wait.[ch].
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Reviewed-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Weston Andros Adamson [Fri, 8 Aug 2014 15:00:56 +0000 (11:00 -0400)]
nfs: fix error handling in lock_and_join_requests
This fixes handling of errors from nfs_page_group_lock in
nfs_lock_and_join_requests. It now releases the inode lock and the
reference to the head request.
Reported-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Reviewed-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Weston Andros Adamson [Fri, 8 Aug 2014 15:00:55 +0000 (11:00 -0400)]
nfs: use blocking page_group_lock in add_request
__nfs_pageio_add_request was calling nfs_page_group_lock nonblocking, but
this can return -EAGAIN which would end up passing -EIO to the application.
There is no reason not to block in this path, so change the two calls to
do so. Also, there is no need to check the return value of
nfs_page_group_lock when nonblock=false, so remove the error handling code.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Reviewed-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Weston Andros Adamson [Fri, 8 Aug 2014 15:00:54 +0000 (11:00 -0400)]
nfs: fix nonblocking calls to nfs_page_group_lock
nfs_page_group_lock was calling wait_on_bit_lock even when told not to
block. Fix by first trying test_and_set_bit, followed by wait_on_bit_lock
if and only if blocking is allowed. Return -EAGAIN if nonblocking and the
test_and_set of the bit was already locked.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Reviewed-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Weston Andros Adamson [Fri, 8 Aug 2014 15:00:53 +0000 (11:00 -0400)]
nfs: change nfs_page_group_lock argument
Flip the meaning of the second argument from 'wait' to 'nonblock' to
match related functions. Update all five calls to reflect this change.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Reviewed-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Linus Torvalds [Fri, 22 Aug 2014 21:50:21 +0000 (14:50 -0700)]
Merge tag 'pwm/for-3.17-rc2' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fix from Thierry Reding:
"Just one bugfix for the PWM lookup table code that would cause a PWM
channel to be set to the wrong period and polarity for non-perfect
matches"
* tag 'pwm/for-3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fix period and polarity in pwm_get() for non-perfect matches
Michal Kazior [Mon, 18 Aug 2014 11:19:09 +0000 (13:19 +0200)]
mac80211: fix channel switch for chanctx-based drivers
The new_ctx pointer is set only for non-chanctx drivers. This yielded a
crash for chanctx-based drivers during channel switch finalization:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
IP: ieee80211_vif_use_reserved_switch+0x71c/0xb00 [mac80211]
Use an adequate chanctx pointer to fix this.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This page took 0.050496 seconds and 5 git commands to generate.