Viresh Kumar [Tue, 24 May 2011 08:34:09 +0000 (14:04 +0530)]
dmaengine/dw_dmac: Update maintainer-ship
Nobody is currently maintaining dw_dmac. We are using dw_dmac for SPEAr13xx and
are currently maintaining it. After discussing with Vinod, sending this patch to
update maintainer-ship of dw_dmac.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Linus Walleij [Wed, 18 May 2011 12:18:57 +0000 (14:18 +0200)]
dmaengine: move link order
Move the dmaengine subsystem up early in the drivers Makefile so
DMA is made available early to all drivers, just like e.g.
regulators. Now even regulators can use DMA on the same initlevel.
As a result we can bump the ste_dma40 and coh901318 dmaengine
drivers down one initlevel to subsys_init().
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Linus Walleij [Tue, 19 Apr 2011 00:31:32 +0000 (08:31 +0800)]
dmaengine/dw_dmac: implement pause and resume in dwc_control
Some peripherals like amba-pl011 needs pause to be implemented in DMA controller
drivers. This also returns correct status from dwc_tx_status() in case chan is
paused.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Viresh Kumar [Fri, 15 Apr 2011 10:33:35 +0000 (16:03 +0530)]
dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable submission from callback
dmaengine routines can be called from interrupt context and with interrupts
disabled. Whereas spin_unlock_bh can't be called from such contexts. So this
patch converts all spin_*_bh routines to irqsave variants.
Also, spin_lock() used in tasklet is converted to irqsave variants, as tasklet
can be interrupted, and dma requests from such interruptions may also call
spin_lock.
Now, submission from callbacks are permitted as per dmaengine framework. So we
shouldn't hold any locks while calling callbacks. As locks were taken by parent
routines, so releasing them before calling callbacks doesn't look clean enough.
So, locks are taken inside all routine now, whereever they are required. And
dwc_descriptor_complete is always called without taking locks.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Viresh Kumar [Mon, 18 Apr 2011 09:24:56 +0000 (14:54 +0530)]
dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT
If len passed in sg for slave_sg transfers is greater than DWC_MAX_COUNT, then
driver programmes controller incorrectly. This patch adds code to handle this
situation by allocation more than one desc for same sg.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Viresh Kumar [Fri, 15 Apr 2011 10:33:35 +0000 (16:03 +0530)]
dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS
If transfer status is !=DMA_SUCCESS, return total transfer len as residue,
instead of zero.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Viresh Kumar [Fri, 15 Apr 2011 10:33:35 +0000 (16:03 +0530)]
dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called
If dmaengine_terminate_all() is called for dma channel, then it doesn't make
much sense to call registered callback routine. While in case of success or
failure it must be called.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Nicolas Ferre [Mon, 9 May 2011 16:11:37 +0000 (18:11 +0200)]
dmaengine: at_hdmac: pause: no need to wait for FIFO empty
With the addition of the "pause" feature, an active wait was introduced
to check the "FIFO empty" event. This event was not always happening and
a timout contition was needed.
But, in some cases, this event depend on the peripheral connected to the
channel that is paused: FIFO becomes empty if the peripheral consumes data.
The timeout is pretty difficult to evaluate. Moreover, this check is not
needed.
In conclusion, it seems sensible to entirely remove the checking of
"FIFO empty" status when pausing.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
[commit msg edited for grammer]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Tomoya MORINAGA [Mon, 9 May 2011 07:09:40 +0000 (16:09 +0900)]
pch_dma: modify pci device table definition
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Tomoya MORINAGA [Mon, 9 May 2011 07:09:39 +0000 (16:09 +0900)]
pch_dma: Support new device ML7223 IOH
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub).
The ML7223 IOH is for MP(Media Phone) use.
The ML7223 is companion chip for Intel Atom E6xx series.
The ML7223 is completely compatible for Intel EG20T PCH.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Tomoya MORINAGA [Mon, 9 May 2011 07:09:38 +0000 (16:09 +0900)]
pch_dma: Support I2S for ML7213 IOH
Support I2S device for ML7213 IOH
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Tomoya MORINAGA [Mon, 9 May 2011 07:09:37 +0000 (16:09 +0900)]
pch_dma: Fix DMA setting issue
Currently, Direct-Start mode(*) is enabled.
Our IOH's devices must not use this mode.
This causes unexpected behavior.
This patch deletes Direct-Start setting.
(*) This mode is used in order for CPU to generate the DMA request.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Tomoya MORINAGA [Mon, 9 May 2011 07:09:36 +0000 (16:09 +0900)]
pch_dma: modify for checkpatch
Fix checkpatch warnings.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Tomoya MORINAGA [Mon, 9 May 2011 07:09:35 +0000 (16:09 +0900)]
pch_dma: fix dma direction issue for ML7213 IOH video-in
Currently, even-channel number is set as tx direction and odd is set as rx.
However, though video-in uses ch6, the direction is not tx but rx.
This patch sets video-in's DMA direction correctly.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Nicolas Ferre [Fri, 6 May 2011 17:56:53 +0000 (19:56 +0200)]
dmaengine: at_hdmac: use descriptor chaining help function
A little function helps to chain descriptors:
it is already used in cyclic dma operations, now use it in memcpy and slave_sg
preparation functions.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Nicolas Ferre [Fri, 6 May 2011 17:56:52 +0000 (19:56 +0200)]
dmaengine: at_hdmac: implement pause and resume in atc_control
Pause and resume controls are useful for audio devices. This also returns
correct status from atc_tx_status() in case chan is paused.
Idea from dw_dmac patch by Linus Walleij.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Nicolas Ferre [Fri, 6 May 2011 17:56:51 +0000 (19:56 +0200)]
dmaengine: at_hdmac: set residue as total len in atc_tx_status
If transfer status is !=DMA_SUCCESS, return total transfer len as residue,
instead of zero.
Idea from dw_dmac patch by Viresh Kumar.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Philippe Langlais [Sat, 7 May 2011 15:09:43 +0000 (17:09 +0200)]
dmaengine/ste_dma40: fix introduced warnings
The compiler nowadays moans about possibly non-assigned variable.
Fix this by default-assigning 0.
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Nicolas Ferre [Sat, 30 Apr 2011 14:57:49 +0000 (16:57 +0200)]
dmaengine: at_hdmac: specialize AHB interfaces to optimize transfers
DMA controller has two AHB interfaces on the SOC internal
matrix.
It is more efficient to specialize each interface as the
access to memory can introduce latencies that are not compatible
with peripheral accesses requirements.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Nicolas Ferre [Sat, 30 Apr 2011 14:57:48 +0000 (16:57 +0200)]
dmaengine: at_hdmac: remove channel status testing in tasklet
There is no need to test if channel is enabled in tasklet:
- in error path, channel is disabled in interrupt routine
- in normal path, this test is performed in sub functions to report
a misuse of the engine.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Nicolas Ferre [Sat, 30 Apr 2011 14:57:47 +0000 (16:57 +0200)]
dmaengine: at_hdmac: debug information sg_len for prep_slave_sg
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Nicolas Ferre [Sat, 30 Apr 2011 14:57:46 +0000 (16:57 +0200)]
dmaengine: at_hdmac: add cyclic DMA operation support
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Nicolas Ferre [Sat, 30 Apr 2011 14:57:45 +0000 (16:57 +0200)]
dmaengine: at_hdmac: modify way to use interrupts
Now we use Buffer Transfer Completed interrupts. If we
want a chained buffer completed information, we setup the
ATC_IEN bit in CTRLB register in the lli.
This is done by set_desc_eol() function and used by
memcpy/slave_sg functions.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Liu Yuan [Sat, 2 Apr 2011 06:20:47 +0000 (14:20 +0800)]
drivers, pch_dma: Fix uninitialized var before use
In the function pdc_desc_get(), var 'i' is not
initialized before use. This patch fixes it.
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Vinod Koul [Wed, 6 Apr 2011 06:21:12 +0000 (11:51 +0530)]
Merge branch 'old_next' into next
Kristen Carlson Accardi [Thu, 31 Mar 2011 18:02:43 +0000 (11:02 -0700)]
intel_mid_dma: fix runtime pm issues
Use the correct api in probe to enable runtime pm for this driver.
Additionally, do not just call legacy suspend for runtime_suspend,
as this duplicates some work the pci core does for you.
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Coly Li [Sat, 26 Mar 2011 17:26:54 +0000 (01:26 +0800)]
dma: use BUG_ON correctly in ppc4xx/adam.c, v4
This patch makes BUG_ON() usage correct in drivers/dma/ppc4xx/adam.c
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Sean MacLennan <smaclennan@pikatech.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Coly Li <bosong.ly@taobao.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Coly Li [Sat, 26 Mar 2011 17:26:53 +0000 (01:26 +0800)]
dma: use BUG_ON correctly in mv_xor.c, v4
This patch makes BUG_ON() usage correct in drivers/dma/mv_xor.c
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Coly Li <bosong.ly@taobao.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Coly Li [Sat, 26 Mar 2011 17:26:52 +0000 (01:26 +0800)]
dma: use BUG_ON correctly in iop-adma.c, v4
This patch makes BUG_ON() usage correct in drivers/dma/iop-adma.c.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Coly Li <bosong.ly@taobao.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Viresh Kumar [Thu, 24 Mar 2011 06:02:15 +0000 (11:32 +0530)]
dmaengine/dw_dmac fix: dwc_scan_descriptors must compare first desc address also with llp
dwc_scan_descriptors scans all descriptors from active_list in case transfer is
not completed. It compares first_desc->lli.llp, and then all childrens of its
tx_list. But it doesn't compare its own address, i.e. first_desc->txd.phys, as
this is what we have initially programmed into the controller register. So this
causes dma to stop and finish a transfer, which was never started. And thus
fail.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Linus Torvalds [Tue, 29 Mar 2011 19:09:47 +0000 (12:09 -0700)]
Linux 2.6.39-rc1
Linus Torvalds [Tue, 29 Mar 2011 19:09:30 +0000 (12:09 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits)
mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE
mmc: tmio_mmc: Move some defines into a shared header
mmc: tmio: support aggressive clock gating
mmc: tmio: fix power-mode interpretation
mmc: tmio: remove work-around for unmasked SDIO interrupts
sh: fix SDHI IO address-range
ARM: mach-shmobile: fix SDHI IO address-range
mmc: tmio: only access registers above 0xff, if available
mfd: remove now redundant sh_mobile_sdhi.h header
sh: convert boards to use linux/mmc/sh_mobile_sdhi.h
ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h
mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver
sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD
mmc: tmio: split core functionality, DMA and MFD glue
mmc: tmio: use PIO for short transfers
mmc: tmio-mmc: Improve DMA stability on sh-mobile
mmc: fix mmc_app_send_scr() for dma transfer
mmc: sdhci-esdhc: enable esdhc on imx53
mmc: sdhci-esdhc: use writel/readl as general APIs
mmc: sdhci: add the abort CMDTYPE bits definition
...
Linus Torvalds [Tue, 29 Mar 2011 18:43:30 +0000 (11:43 -0700)]
Merge branch 'frv' of git://git./linux/kernel/git/dhowells/linux-2.6-frv
* 'frv' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv:
FRV: Use generic show_interrupts()
FRV: Convert genirq namespace
frv: Select GENERIC_HARDIRQS_NO_DEPRECATED
frv: Convert cpu irq_chip to new functions
frv: Convert mb93493 irq_chip to new functions
frv: Convert mb93093 irq_chip to new function
frv: Convert mb93091 irq_chip to new functions
frv: Fix typo from __do_IRQ overhaul
frv: Remove stale irq_chip.end
FRV: Do some cleanups
FRV: Missing node arg in alloc_thread_info_node() macro
NOMMU: implement access_remote_vm
NOMMU: support SMP dynamic percpu_alloc
NOMMU: percpu should use is_vmalloc_addr().
Linus Torvalds [Tue, 29 Mar 2011 18:36:52 +0000 (11:36 -0700)]
Merge branch 'stable/bug-fixes-rc1' of git://git./linux/kernel/git/konrad/xen
* 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: Use new irq_move functions
xen: Convert genirq namespace
xen: fix p2m section mismatches
xen/p2m: Allocate p2m tracking pages on override
xen-gntdev: unlock on error path in gntdev_mmap()
xen-gntdev: return -EFAULT on copy_to_user failure
Linus Torvalds [Tue, 29 Mar 2011 18:20:09 +0000 (11:20 -0700)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
watchdog: softdog.c: enhancement to optionally invoke panic instead of reboot on timer expiry
watchdog: fix nv_tco section mismatch
watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase.
watchdog: Convert release_resource to release_region/release_mem_region
watchdog: s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region
Linus Torvalds [Tue, 29 Mar 2011 18:11:18 +0000 (11:11 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
amd64_edac: Fix potential memleak
Linus Torvalds [Tue, 29 Mar 2011 17:46:15 +0000 (10:46 -0700)]
Merge branch 'irq-final-for-linus-v2' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits)
gpio: ab8500: Mark broken
genirq: Remove move_*irq leftovers
genirq: Remove compat code
drivers: Final irq namespace conversion
mn10300: Use generic show_interrupts()
mn10300: Cleanup irq_desc access
mn10300: Convert genirq namespace
frv: Use generic show_interrupts()
frv: Convert genirq namespace
frv: Select GENERIC_HARDIRQS_NO_DEPRECATED
frv: Convert cpu irq_chip to new functions
frv: Convert mb93493 irq_chip to new functions
frv: Convert mb93093 irq_chip to new function
frv: Convert mb93091 irq_chip to new functions
frv: Fix typo from __do_IRQ overhaul
frv: Remove stale irq_chip.end
m68k: Convert irq function namespace
xen: Use new irq_move functions
xen: Cleanup genirq namespace
unicore32: Use generic show_interrupts()
...
Peter Huewe [Tue, 29 Mar 2011 11:31:25 +0000 (13:31 +0200)]
char/tpm: Fix unitialized usage of data buffer
This patch fixes information leakage to the userspace by initializing
the data buffer to zero.
Reported-by: Peter Huewe <huewe.external@infineon.com>
Signed-off-by: Peter Huewe <huewe.external@infineon.com>
Signed-off-by: Marcel Selhorst <m.selhorst@sirrix.com>
[ Also removed the silly "* sizeof(u8)". If that isn't 1, we have way
deeper problems than a simple multiplication can fix. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Borislav Petkov [Tue, 29 Mar 2011 16:10:53 +0000 (18:10 +0200)]
amd64_edac: Fix potential memleak
We check the pointers together but at least one of them could be invalid
due to failed allocation. Since we cannot continue if either of the two
allocations has failed, exit early by freeing them both.
Cc: <stable@kernel.org> # 38.x
Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Dave Chinner [Tue, 29 Mar 2011 07:08:50 +0000 (18:08 +1100)]
fs: don't use igrab() while holding i_lock
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥
If we are already holding the i_lock, we have a reference to the
inode so we can safely use ihold() to gain an extra reference. This
avoids hangs due to lock recursion on the i_lock now that the
inode_lock is gone and igrab() uses the i_lock itself.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 29 Mar 2011 14:41:33 +0000 (07:41 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
xfrm: Restrict extended sequence numbers to esp
xfrm: Check for esn buffer len in xfrm_new_ae
xfrm: Assign esn pointers when cloning a state
xfrm: Move the test on replay window size into the replay check functions
netdev: bfin_mac: document TE setting in RMII modes
drivers net: Fix declaration ordering in inline functions.
cxgb3: Apply interrupt coalescing settings to all queues
net: Always allocate at least 16 skb frags regardless of page size
ipv4: Don't ip_rt_put() an error pointer in RAW sockets.
net: fix ethtool->set_flags not intended -EINVAL return value
mlx4_en: Fix loss of promiscuity
tg3: Fix inline keyword usage
tg3: use <linux/io.h> and <linux/uaccess.h> instead <asm/io.h> and <asm/uaccess.h>
net: use CHECKSUM_NONE instead of magic number
Net / jme: Do not use legacy PCI power management
myri10ge: small rx_done refactoring
bridge: notify applications if address of bridge device changes
ipv4: Fix IP timestamp option (IPOPT_TS_PRESPEC) handling in ip_options_echo()
can: c_can: Fix tx_bytes accounting
can: c_can_platform: fix irq check in probe
...
Thomas Gleixner [Thu, 24 Mar 2011 20:37:31 +0000 (21:37 +0100)]
xen: Use new irq_move functions
These functions take irq_data as an argument and avoid a redundant
lookup in the sparse irq case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Thomas Gleixner [Fri, 25 Mar 2011 10:01:39 +0000 (11:01 +0100)]
xen: Convert genirq namespace
Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Randy Dunlap [Thu, 24 Mar 2011 20:34:32 +0000 (13:34 -0700)]
xen: fix p2m section mismatches
Fix section mismatch warnings:
set_phys_range_identity() is called by __init xen_set_identity(),
so also mark set_phys_range_identity() as __init.
then:
__early_alloc_p2m() is called set_phys_range_identity(), so also mark
__early_alloc_p2m() as __init.
WARNING: arch/x86/built-in.o(.text+0x7856): Section mismatch in reference from the function __early_alloc_p2m() to the function .init.text:extend_brk()
The function __early_alloc_p2m() references
the function __init extend_brk().
This is often because __early_alloc_p2m lacks a __init
annotation or the annotation of extend_brk is wrong.
WARNING: arch/x86/built-in.o(.text+0x7967): Section mismatch in reference from the function set_phys_range_identity() to the function .init.text:extend_brk()
The function set_phys_range_identity() references
the function __init extend_brk().
This is often because set_phys_range_identity lacks a __init
annotation or the annotation of extend_brk is wrong.
[v2: Per Stephen Hemming recommonedation made __early_alloc_p2m static]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Thomas Gleixner [Tue, 29 Mar 2011 13:05:13 +0000 (14:05 +0100)]
FRV: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Thomas Gleixner [Tue, 29 Mar 2011 13:05:13 +0000 (14:05 +0100)]
FRV: Convert genirq namespace
Convert to new function names. Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Thomas Gleixner [Tue, 29 Mar 2011 13:05:13 +0000 (14:05 +0100)]
frv: Select GENERIC_HARDIRQS_NO_DEPRECATED
All chips converted
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Thomas Gleixner [Tue, 29 Mar 2011 13:05:13 +0000 (14:05 +0100)]
frv: Convert cpu irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Thomas Gleixner [Tue, 29 Mar 2011 13:05:13 +0000 (14:05 +0100)]
frv: Convert mb93493 irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Thomas Gleixner [Tue, 29 Mar 2011 13:05:13 +0000 (14:05 +0100)]
frv: Convert mb93093 irq_chip to new function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Thomas Gleixner [Tue, 29 Mar 2011 13:05:13 +0000 (14:05 +0100)]
frv: Convert mb93091 irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Thomas Gleixner [Tue, 29 Mar 2011 13:05:13 +0000 (14:05 +0100)]
frv: Fix typo from __do_IRQ overhaul
Compiles way better.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Thomas Gleixner [Tue, 29 Mar 2011 13:05:12 +0000 (14:05 +0100)]
frv: Remove stale irq_chip.end
irq_chip.end got obsolete with the removal of __do_IRQ().
irq-mb93093.c even lacks an implementation, but nobody noticed that
it's broken since commit 88d6e1 in 2006.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Amerigo Wang [Tue, 29 Mar 2011 13:05:12 +0000 (14:05 +0100)]
FRV: Do some cleanups
1. frv doesn't support SMP, remove the useless SMP bits.
2. frv has its own alloc_task_struct, so define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
(I am not sure if frv should use generic alloc_task_struct().)
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 29 Mar 2011 13:05:12 +0000 (14:05 +0100)]
FRV: Missing node arg in alloc_thread_info_node() macro
There are two alloc_thread_info_node() macros defined (one for debugging and
one for normal). The commit that changed them most recently:
commit
b6a84016bd2598e35ead635147fa53619982648d
Author: Eric Dumazet <eric.dumazet@gmail.com>
Date: Tue Mar 22 16:30:42 2011 -0700
Subject: mm: NUMA aware alloc_thread_info_node()
didn't add the node argument into the macro argument list for the normal macro.
This results in the following error:
kernel/fork.c:267:39: error: macro "alloc_thread_info_node" passed 2 arguments, but takes just 1
kernel/fork.c: In function 'dup_task_struct':
kernel/fork.c:267: error: 'alloc_thread_info_node' undeclared (first use in this function)
kernel/fork.c:267: error: (Each undeclared identifier is reported only once
kernel/fork.c:267: error: for each function it appears in.)
Signed-off-by: David Howells <dhowells@redhat.com>
Mike Frysinger [Tue, 29 Mar 2011 13:05:12 +0000 (14:05 +0100)]
NOMMU: implement access_remote_vm
Recent vm changes brought in a new function which the core procfs code
utilizes. So implement it for nommu systems too to avoid link failures.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Simon Horman <horms@verge.net.au>
Tested-by: Ithamar Adema <ithamar.adema@team-embedded.nl>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Tue, 29 Mar 2011 02:02:50 +0000 (04:02 +0200)]
gpio: ab8500: Mark broken
This driver is broken in several aspects.
1) old style irq_chip functions. Sigh
2) Abuse of the unlock callback. That's not supposed to be a state
machine for evrything and some more.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Tue, 29 Mar 2011 00:51:13 +0000 (02:51 +0200)]
genirq: Remove move_*irq leftovers
All users converted to new interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Mon, 28 Mar 2011 11:32:20 +0000 (13:32 +0200)]
genirq: Remove compat code
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Mon, 28 Mar 2011 15:49:12 +0000 (17:49 +0200)]
drivers: Final irq namespace conversion
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 17:54:24 +0000 (18:54 +0100)]
mn10300: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 16:36:37 +0000 (17:36 +0100)]
mn10300: Cleanup irq_desc access
The migration needs only access to irq_data.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 16:35:56 +0000 (17:35 +0100)]
mn10300: Convert genirq namespace
Convert to new function names. Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 17:48:36 +0000 (18:48 +0100)]
frv: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 15:38:49 +0000 (16:38 +0100)]
frv: Convert genirq namespace
Convert to new function names. Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 19:20:39 +0000 (20:20 +0100)]
frv: Select GENERIC_HARDIRQS_NO_DEPRECATED
All chips converted
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
LKML-Reference: <
20110206192106.
601290592@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 19:20:38 +0000 (20:20 +0100)]
frv: Convert cpu irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
LKML-Reference: <
20110206192106.
501651128@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 19:20:37 +0000 (20:20 +0100)]
frv: Convert mb93493 irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
LKML-Reference: <
20110206192106.
401266547@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 19:20:36 +0000 (20:20 +0100)]
frv: Convert mb93093 irq_chip to new function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
LKML-Reference: <
20110206192106.
300303769@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 19:20:35 +0000 (20:20 +0100)]
frv: Convert mb93091 irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
LKML-Reference: <
20110206192106.
203431646@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 19:20:34 +0000 (20:20 +0100)]
frv: Fix typo from __do_IRQ overhaul
Compiles way better.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
LKML-Reference: <
20110206192106.
109992056@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 19:20:33 +0000 (20:20 +0100)]
frv: Remove stale irq_chip.end
irq_chip.end got obsolete with the removal of __do_IRQ().
irq-mb93093.c even lacks an implementation, but nobody noticed that
it's broken since commit 88d6e1 in 2006.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
LKML-Reference: <
20110206192106.
011224503@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Mon, 28 Mar 2011 11:31:17 +0000 (13:31 +0200)]
m68k: Convert irq function namespace
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 20:31:25 +0000 (21:31 +0100)]
xen: Use new irq_move functions
These functions take irq_data as an argument and avoid a redundant
lookup in the sparse irq case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Thomas Gleixner [Fri, 25 Mar 2011 09:58:06 +0000 (10:58 +0100)]
xen: Cleanup genirq namespace
Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 17:26:42 +0000 (18:26 +0100)]
unicore32: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 17:26:16 +0000 (18:26 +0100)]
unicore32: Convert to new irq function names
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 17:03:13 +0000 (18:03 +0100)]
sparc: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: sparclinux@vger.kernel.org
Thomas Gleixner [Thu, 24 Mar 2011 16:52:54 +0000 (17:52 +0100)]
sparc: Convert to new irq function names
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: sparclinux@vger.kernel.org
Thomas Gleixner [Thu, 24 Mar 2011 16:57:12 +0000 (17:57 +0100)]
sparc: Cleanup direct irq_desc access
Use the proper wrapper functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: sparclinux@vger.kernel.org
Thomas Gleixner [Thu, 24 Mar 2011 08:03:45 +0000 (09:03 +0100)]
sparc: Use the new genirq functionality
Make use of the new features in genirq:
1) Set the chip flag IRCHIP_EOI_IF_HANDLED, which ensures in the
core code that irq_eoi() is only called when the interrupt was
handled. That removes the extra status check in the callback.
2) Use the preflow handler, which is called from the fasteoi core code
before the device handler. That avoids another status check and the
open coded handler redirection.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: sparclinux@vger.kernel.org
Thomas Gleixner [Thu, 24 Mar 2011 15:31:17 +0000 (16:31 +0100)]
sh: Convert to new function names
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 13:47:46 +0000 (14:47 +0100)]
sh: Use the proper accessor functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 16:04:59 +0000 (17:04 +0100)]
powerpc: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:45:20 +0000 (16:45 +0100)]
powerpc: Convert to new irq_* function names
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:36:35 +0000 (16:36 +0100)]
powerpc: irq: Use irqdata based information
We want to tighten the irq_desc access. So use the new accessors for
the same information.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Mon, 28 Mar 2011 14:46:02 +0000 (16:46 +0200)]
powerpc-fsl-msi-use-irqd.patch
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:26:01 +0000 (16:26 +0100)]
powerpc: xilinx: Cleanup flow type handling
The core irq_set_type() function updates the flow type when the chip
callback returns 0. So setting the type is bogus. The core also
updates the LEVEL flag.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:23:57 +0000 (16:23 +0100)]
powerpc: uic: Cleanup flow type handling
The core irq_set_type() function updates the flow type when the chip
callback returns 0. So setting the type is bogus. The core also
updates IRQ_LEVEL.
Use irq_data to get the level type information in the chip functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:20:15 +0000 (16:20 +0100)]
powerpc: mpic: Cleanup flow type handling
The core irq_set_type() function updates the flow type when the chip
callback returns 0. So setting the type is bogus.
The new core code allows to update the type in irq_data and return
IRQ_SET_MASK_OK_NOCOPY, so the core code will not touch it, except for
setting the IRQ_LEVEL flag.
Retrieve the IRQ_LEVEL information from irq_data which avoids a
redundant sparse irq lookup as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:18:32 +0000 (16:18 +0100)]
powerpc: mpc8xx_pic: Cleanup flow type handling
The core irq_set_type() function updates the flow type when the chip
callback returns 0. So setting the type is bogus. The level flag is
updated in the core as well.
Use the proper accessors for setting the irq handlers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:16:30 +0000 (16:16 +0100)]
powerpc: ipic: Cleanup flow type handling
The core irq_set_type() function updates the flow type when the chip
callback returns 0. So setting the type is bogus.
The new core code allows to update the type in irq_data and return
IRQ_SET_MASK_OK_NOCOPY, so the core code will not touch it, except for
setting the IRQ_LEVEL flag.
Use the proper accessors for setting the irq handlers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:13:38 +0000 (16:13 +0100)]
powerpc: cpm2_pic: Use IRQCHIP_EOI_IF_HANDLED
The core code provides the same functionality when the
IRQCHIP_EOI_IF_HANDLED flag is set for the irq chip.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:07:51 +0000 (16:07 +0100)]
powerpc: cpm2_pic: Cleanup flow type handling
The core irq_set_type() function updates the flow type when the chip
callback returns 0. So setting the type is bogus.
The new core code allows to update the type in irq_data and return
IRQ_SET_MASK_OK_NOCOPY, so the core code will not touch it, except for
setting the IRQ_LEVEL flag.
Use the proper accessors for setting the irq handlers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:04:41 +0000 (16:04 +0100)]
powerpc: cell: Fix the irq_desc access
The core irq_set_type() function updates the flow type when the chip
callback returns 0. It also updates irq_data, so this can be used in
irq_ack() to check for the level bit. That avoids a redundant sparse
irq lookup.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 15:03:07 +0000 (16:03 +0100)]
powerpc: mac: pic: Use irqd_is_level_type()
No need for a redundant sparse irq lookup. irqdata provides the same
information.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 14:54:03 +0000 (15:54 +0100)]
powerpc: media5200: Remove pointless set_irq_type()
The irq chip has no irq_set_type() callback. So calling the call is
pointless. Set IRQ_LEVEL via the proper accessor.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 25 Mar 2011 14:43:57 +0000 (15:43 +0100)]
powerpc: Use proper accessors for IRQ_* flags
Use the proper accessors instead of open access to irq_desc.
Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Mon, 28 Mar 2011 11:47:54 +0000 (13:47 +0200)]
parisc: Use irq_to_desc() in show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 16:41:44 +0000 (17:41 +0100)]
parisc: Convert irq namespace
Convert to the new function names. Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: linux-parisc@vger.kernel.org
This page took 0.044068 seconds and 5 git commands to generate.