Marek Szyprowski [Mon, 4 Oct 2010 09:38:12 +0000 (18:38 +0900)]
ARM: S5PV210: GONI: Add support for QT602240 TS driver
Add required platform definitions for QT602240 touchscreen on I2C2 bus.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Mon, 4 Oct 2010 07:39:22 +0000 (16:39 +0900)]
ARM: S5PV210: Add si470x radio device to the GONI board
Add required platform definitions for si470x radio device on Samsung
Goni board.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[kgene.kim@samsung.com: minor title fixes]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Mon, 4 Oct 2010 07:39:20 +0000 (16:39 +0900)]
ARM: S5PV210: Add support for S6E63M0 LCD controller on GONI board
Add required platform definitions for S6E63M0 LCD controller on Samsung
Goni board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title fixes]
[kgene.kim@samsung.com: fix build error]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jongpill Lee [Sat, 2 Oct 2010 10:13:42 +0000 (19:13 +0900)]
ARM: S5PV210: Add Power Management Support
This patch adds suspend-to-ram support for S5PV210.
Note. This patch is confirmed on SMDKV210 and SMDKC110 board.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Sangbeom Kim [Fri, 8 Oct 2010 12:50:20 +0000 (21:50 +0900)]
ARM: S5PV210: Fix build error on pm debug
This patch fixes build error by S3C2410 PM Suspend debug option
due to undefined address.
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Sat, 2 Oct 2010 02:48:09 +0000 (11:48 +0900)]
ARM: S5P: Unify defines for both gpio interrupt types
Samsung S5P SoCs have the same interrupt type defines for both
external interrupts and gpio interrupts. This patch removes all
duplicates from S5PC100 and S5PV210 specific includes as well as
gpio interrupt code and put a common defines to plat/irqs.h
NOTE: Do not use this for S5P6440 and S5P6450.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: add note for S5P64X0]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Joonyoung Shim [Fri, 1 Oct 2010 02:24:39 +0000 (11:24 +0900)]
ARM: SAMSUNG: Add common samsung_gpiolib_to_irq function
This patch adds a common callback for gpio_to_irq() for external and
gpio interrupts for Samsung SoCs.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
[kgene.kim@samsung.com: moved samsung_gpiolib_to_irq() for s3c24xx build]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Joonyoung Shim [Fri, 1 Oct 2010 02:23:06 +0000 (11:23 +0900)]
ARM: S5PC100: Move External Interrupt definitions
This patch moves external interrupt definitions from mach/gpio.h
to mach/regs-gpio.h for consistency with S5PV210.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Joonyoung Shim [Fri, 1 Oct 2010 02:18:05 +0000 (11:18 +0900)]
ARM: S5PC100: Use generic S5P GPIO Interrupt interface
S5PC100 SoC can use common S5P GPIO interrupt code. This patch
removes specific S5PC100 gpio interrupts code and adds required
defines and code to make use of common S5P code.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Fri, 1 Oct 2010 02:16:44 +0000 (11:16 +0900)]
ARM: S5PV210: Add support for GPIO Interrupt
S5PV210/S5PC110 can use common S5P GPIO interrupt code.
This patch adds required defines and code to make use of it.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title fixes]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Fri, 1 Oct 2010 01:40:37 +0000 (10:40 +0900)]
ARM: S5P: Add common S5P GPIO Interrupt support
This patch adds common code to enable support of GPIO interrupt on
S5P SoCs.
The total number of GPIO pins is quite large on S5P SoCs. Registering
irq support for all of them would be a resource waste. Because of that
the interrupt support for standard GPIO pins is registered dynamically
by the s5p_register_gpio_interrupt() function.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title fixes]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Wed, 29 Sep 2010 13:10:51 +0000 (22:10 +0900)]
ARM: S5PV210: Enable USB HSOTG gadget build
Add the necessary definitions and mapping information to enable the
s3c-hsotg gadget to build.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Wed, 29 Sep 2010 13:05:19 +0000 (22:05 +0900)]
ARM: S5PV210: Add Support for MMC regulators on GONI board
Add required platform definitions for MMC power regulators on Samsung
Goni board. GPIO pin GONI_EXT_FLASH_EN has been transferred from machine
startup code to fixed voltage regulator.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Thu, 30 Sep 2010 11:59:46 +0000 (20:59 +0900)]
ARM: S5PV210: Add Support for OTG USB Gadget on GONI board
Add required platform definitions for s3c-hsotg driver to enable usb
gadget support on Samsung Goni board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Wed, 29 Sep 2010 12:50:04 +0000 (21:50 +0900)]
ARM: S5PV210: fb setup for GONI - remove pixel clock
Since commit
67a38950f0917aecfe1a3e46720d8bbb0020 there is no need
to set pixel clock for the s3c-fb driver's window information.
The correct pixel clock value can be automatically calculated from
the other screen parameters. This patch removes the redundant pixel clock
parameter.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Wed, 29 Sep 2010 12:49:17 +0000 (21:49 +0900)]
ARM: S5PV210: update framebuffer setup information for GONI
Change the default upper_margin and vsync_len to get rid of repeated last
line on the display.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Thomas Abraham [Sat, 2 Oct 2010 03:45:25 +0000 (12:45 +0900)]
ARM: S5P: Remove the unused clk_arm clock from plat-s5p
All the S5P series SoCs use the 'struct clksrc_clk' type to represent the
armclk. So the clk_arm clock instance available in the plat-s5p clock code
is not used in any of the S5P series SoCs.
This patch removes the unused clk_arm instance from plat-s5p clock code.
Reported-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 29 Sep 2010 12:20:56 +0000 (21:20 +0900)]
ARM: S5P64XX: Remove redundant selection PLAT_S5P.
This patch removes redundant selection PLAT_S5P in the CPU_S5P64XX config.
Because PLAT_S5P is selected if select ARCH_S5P64XX in the plat-s5p/Kconfig.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kyungmin Park [Wed, 29 Sep 2010 12:37:50 +0000 (21:37 +0900)]
ARM: S5P: Remove redundant selection PLAT_S5P for S5PC100, S5PV210 and S5PV310
The selection PLAT_S5P is selected with plat-s5p/Kconfig.
So remove it form each CPU_S5PXXXX config.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: edited title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kyungmin Park [Wed, 29 Sep 2010 12:33:29 +0000 (21:33 +0900)]
ARM: S5PV310: Place the common SPARSEMEM at ARCH_S5PV310
In case of S5PV310/S5PC210, it uses the SPARSEMEM as default memory
configuration. So moved to ARCH_S5PV310 config.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: edited title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kyungmin Park [Wed, 29 Sep 2010 12:29:27 +0000 (21:29 +0900)]
ARM: S5PV210: Place the common SPARSEMEM at ARCH_S5PV210
In case of S5PV210/S5PC110, it uses the SPARSEMEM as default memory
configuration. So moved to ARCH_S5PV210 config.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: edited title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kyuho Choi [Wed, 29 Sep 2010 11:51:03 +0000 (20:51 +0900)]
ARM: S5PV210: Add Torbreck board support
This patch adds to support Torbreck board of aESOP community using
Samsung S5PV210 SoC.
Signed-off-by: Kyuho Choi <chlrbgh0@gmail.com>
Signed-off-by: Hyunchul Ko <ghcstop@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Boojin Kim [Wed, 29 Sep 2010 11:42:15 +0000 (20:42 +0900)]
ARM: S5PV310: Fix physical address of System Controller Register
The physical address of SYSCON(System Controller) is wrong.
This patch fixs this wrong physical address value from 0x10020000 to 0x10010000.
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Changhwan Youn [Wed, 29 Sep 2010 11:31:42 +0000 (20:31 +0900)]
ARM: S5PV310: Optimize interrupt source searching code
It is reported by Junseok Jung that using clz instruction is
better instead of using for-loop to find the interrupt source.
This patch modifies interrupt source searching code using __ffs().
The __ffs() is implemented using clz instruction.
Suggested-by: Junseok Jung <jundols.jung@samsung.com>
Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jemings Ko [Mon, 20 Sep 2010 06:33:04 +0000 (15:33 +0900)]
ARM: S5PV310: Add support Watchdog Timer
This patch adds support Watchdog Timer for S5PV310 and S5PC210.
Signed-off-by: Jemings Ko <jemings@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Changhwan Youn [Mon, 20 Sep 2010 06:25:51 +0000 (15:25 +0900)]
ARM: S5PV310: Add support RTC
This patch adds support RTC for S5PV310 and S5PC210.
Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Jemings Ko <jemings@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jaecheol Lee [Wed, 15 Sep 2010 06:57:37 +0000 (15:57 +0900)]
ARM: S5PV210: Add DMC map_desc table for supporting DMC access
This patch adds DMC(DRAM Memory Controller) map_desc table.
Because some driver such as CPUFREQ need to access DMC register.
Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Joonyoung Shim [Wed, 8 Sep 2010 23:17:43 +0000 (08:17 +0900)]
ARM: S5PV210: Add keypad device to the GONI board
This patch is to support keypad device to the GONI board.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jaecheol Lee [Sat, 18 Sep 2010 01:50:46 +0000 (10:50 +0900)]
ARM: S5PV310: Fix clkset_moutcore_list
This patch fixes source clocks of moutcore.
That should be clk_mout_apll instead of clk_sclk_apll.
Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Fri, 20 Aug 2010 12:09:18 +0000 (21:09 +0900)]
ARM: SAMSUNG: Change the 3rd HSMMC interrupt name for compatibility
This patch changes the 3rd HSMMC interrupt name for compatibility
from IRQ_MMC to IRQ_HSMMC3.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jongpill Lee [Wed, 18 Aug 2010 13:54:48 +0000 (22:54 +0900)]
ARM: S5PV310: Adds various special clocks
This patch adds various special clocks for S5PV310/S5PC210.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jongpill Lee [Wed, 18 Aug 2010 13:51:23 +0000 (22:51 +0900)]
ARM: S5PV310: Add video clocks
This patch adds video clocks for S5PV310/S5PC210.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jongpill Lee [Wed, 18 Aug 2010 13:49:24 +0000 (22:49 +0900)]
ARM: S5PV310: Add various clocks
This patch adds various clocks for S5PV310/S5PC210.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jongpill Lee [Wed, 18 Aug 2010 13:39:26 +0000 (22:39 +0900)]
ARM: S5PV310: Adds SDMMC clock for S5PV310
This patch adds SDMMC clocks for S5PV310/S5PC210.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jongpill Lee [Wed, 18 Aug 2010 13:33:43 +0000 (22:33 +0900)]
ARM: S5PV310: Adds enable and ctrlbit for clk_vpllsrc
This patch adds enable and ctrlbit for struct clksrc_clk clk_vpllsrc
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jongpill Lee [Wed, 18 Aug 2010 13:24:53 +0000 (22:24 +0900)]
ARM: S5PV310: Adds printing ACLK200, ACLK100, ACLK160 and ACLK133
This patch adds log messages of aclk_200, aclk_100, aclk_160, and
aclk_133. And adds clk_p.rate from calculated aclk_100.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jongpill Lee [Wed, 18 Aug 2010 13:16:45 +0000 (22:16 +0900)]
ARM: S5PV310: Adds clk_sclk_usbphy0, _usbphy1, and _hdmiphy
This patch adds struct clk clk_sclk_usbphy0, _usbphy1, and _hdmiphy
for adding member of clkset_group_list.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 18 Aug 2010 13:06:02 +0000 (22:06 +0900)]
ARM: S5PV310: Adds clkset_aclk for removing clkset_aclk_xxx
This patch adds 'clkset_aclk' to use commonly. And removed struct
clksrc_sources clkset_aclk_200, clkset_aclk_100, clkset_aclk_160,
and clkset_aclk_133.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 18 Aug 2010 13:03:19 +0000 (22:03 +0900)]
ARM: S5PV310: Removed unused clock
This pach removed unused clock on S5PV310/S5PC210.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 18 Aug 2010 12:59:01 +0000 (21:59 +0900)]
ARM: S5PV310: Adds clock addresses for S5PV310
This patch adds definition of clock address.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Changhwan Youn [Fri, 20 Aug 2010 09:17:51 +0000 (18:17 +0900)]
ARM: S5PV310: Add CPU hotplug support for S5PV310
This patch adds CPU hotplug support for S5PV310/S5PC210.
Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kyungmin Park [Sat, 21 Aug 2010 00:49:49 +0000 (09:49 +0900)]
ARM: S5PV310: Add GPIO keys at Universal board
Universal board has 5 GPIO keys.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Fri, 6 Aug 2010 11:33:46 +0000 (20:33 +0900)]
ARM: S5PV310: update S5PV310 Kconfig for supporting multiple machines
This patch updates Kconfig of mach-s5pv310 for easily dividing S5PC210
and S5PV310 boards. S5PC210(MCP) machines and S5PV310 machines can be
build into one kernel, this will be provied/submitted when new defconfig
can be merged.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Fri, 6 Aug 2010 11:12:06 +0000 (20:12 +0900)]
ARM: S5PV310: Add SMDKC210 board support file
This patch adds Samsung SMDKC210 board support file. The SoC
of SMDKC210, S5PC210(MCP) is one of package option of S5PV310.
And because composition of SMDKC210 and SMDKV310 differs, need
SMDKC210 with SMDKV310.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Thu, 9 Sep 2010 12:57:29 +0000 (21:57 +0900)]
ARM: S5PV310: Fix build error on GPIO map
This patch fixes build error about GPIO address due to
conflict of commit
4d914705 and
19a2c065.
- commit
4d914705: Fix on GPIO base addresses
- commit
19a2c065: Moves initial map for merging S5P64X0
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
SeungChull Suh [Sat, 2 Oct 2010 03:48:12 +0000 (12:48 +0900)]
ARM: S5P64X0: Bug fix on errors of build with CONFIG_PREEMPT_NONE
This patch adds header <linux/sched.h> into the below files for build with
CONFIG_PREEMPT_NONE.
arch/arm/mach-s5p64x0/cpu.c
Signed-off-by: Seung-Chull Suh <sc.suh@samsung.com>
[kgene.kim@samsung.com: edited title and message]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Atul Dahiya [Fri, 8 Oct 2010 12:00:02 +0000 (21:00 +0900)]
ARM: S5P64X0: Fix GPIO rbank support
The patch removes s3c_gpio_lock/unlock to avoid acquiring the lock
recursively as lock is already acquired by calling function.
Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
[kgene.kim@samsung.com: removed useless variable due to this]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Abhilash Kesavan [Fri, 8 Oct 2010 11:55:02 +0000 (20:55 +0900)]
ARM: S5P64X0: Replace the 6440 system device class definition with 64x0
The s5p64x0_sysclass should be used in place of the obselete s5p6440_sysclass.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Naveen Krishna Ch [Fri, 8 Oct 2010 11:53:08 +0000 (20:53 +0900)]
ARM: S5P64X0: FIX typo in the ADC device name
Fix the touch screen device name from s3c64x0-adc to s3c64xx-adc.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 1 Sep 2010 03:40:16 +0000 (12:40 +0900)]
ARM: s5p64x0_defconfig: Update for support S5P6440 and S5P6450
This patch updates s5p64x0_defconfig and changes the name from
s5p6440_defconfig so that can support S5P6440 and S5P6450 with
one kernel.
Tested on SMDK6440(S5P6440) and SMDK6450(S5P6450).
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 1 Sep 2010 06:13:44 +0000 (15:13 +0900)]
ARM: S5P64X0: Add UART serial support for S5P6450
This patch adds UART serial port support for S5P6450 SoC.
The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5.
And to fix membase which is in serial/samsung.c is from Ben Dooks.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Kukjin Kim [Wed, 1 Sep 2010 04:03:39 +0000 (13:03 +0900)]
ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file
This patch moves smdk6440 board file from mach-s5p6440 into the new
mach-s5p64x0 directory and adds smdk6450 board file.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 8 Sep 2010 07:23:05 +0000 (16:23 +0900)]
ARM: S5P64X0: Move GPIO support files for merge S5P64X0
This patch moves S5P6440 GPIO support files from mach-s5p6440
into the new mach-s5p64x0 for merge S5P6440 and S5P6450 SocS.
NOTE: Not supported S5P6450 GPIO yet. Will be supported soon.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 1 Sep 2010 04:36:59 +0000 (13:36 +0900)]
ARM: S5P64X0: Add S5P6450 I2C support
This patch adds S5P6450 I2C support in the ARCH_S5P64X0. And
moves S5P6440 I2C support files into the mach-s5p64x0 together.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 8 Sep 2010 10:25:44 +0000 (19:25 +0900)]
ARM: S5P64X0: Move DMA support for S5P64X0
This patch moves DMA support files in the mach-s5p64x0
for S5P6440 and S5P6450 SoCs.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Jassi Brar <jassi.brar@samsung.com>
Kukjin Kim [Wed, 8 Sep 2010 10:21:23 +0000 (19:21 +0900)]
ARM: S5P64X0: Update Audio support
This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Jassi Brar <jassi.brar@samsung.com>
Kukjin Kim [Wed, 1 Sep 2010 04:23:31 +0000 (13:23 +0900)]
ARM: S5P64X0: Update Timer support
This patch updates timer support for S5P6440 and S5P6450 SoCs.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 1 Sep 2010 04:22:17 +0000 (13:22 +0900)]
ARM: S5P64X0: Update IRQ support
This patch updates IRQ support for S5P6440 and S5P6450 SoCs.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Wed, 1 Sep 2010 06:35:30 +0000 (15:35 +0900)]
ARM: S5P64X0: Update Clock for S5P6440 and S5P6450
This patch updates regarding clock files for supporting S5P6440 and
S5P6450 with one kernel image. The mach-s5p64x0/clock.c is for common
of them and there are specific clock files for each SoCs.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Mon, 18 Oct 2010 09:29:51 +0000 (18:29 +0900)]
ARM: S5P64X0: Add S5P64X0(S5P6440 and S5P6450) initialization support
This patch adds ARCH_S5P64X0 which can support S5P6440 and S5P6450 with
one kernel image. So moved some files of mach-s5p6440 into the new ARCH
directory mach-s5p64x0.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Tue, 7 Sep 2010 06:47:18 +0000 (15:47 +0900)]
ARM: S5P64X0: Update Kconfig and Makefile
This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450
machines. It also updates arch/arm/ Kconfig and Makefile to include for
support ARCH_S5P64X0 with one kernel image.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Tue, 31 Aug 2010 07:30:51 +0000 (16:30 +0900)]
ARM: S5P: Moves initial map for merging S5P64X0
This patch moves some initial maps from plat-s5p to machine,
so that can merge mach-s5p6440 and mach-s5p6450.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Fri, 27 Aug 2010 04:56:54 +0000 (13:56 +0900)]
ARM: S5P: Move OneNAND device definitions in plat-s5p
This patch moves OneNAND device definitions from mach-s5pv210 to plat-s5p
so that can support it commonly.
Note: S5PC110 and S5PC210 have same OneNAND driver.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Linus Torvalds [Thu, 14 Oct 2010 23:26:43 +0000 (16:26 -0700)]
Linux 2.6.36-rc8
Linus Torvalds [Thu, 14 Oct 2010 21:32:06 +0000 (14:32 -0700)]
Un-inline the core-dump helper functions
Tony Luck reports that the addition of the access_ok() check in commit
0eead9ab41da ("Don't dump task struct in a.out core-dumps") broke the
ia64 compile due to missing the necessary header file includes.
Rather than add yet another include (<asm/unistd.h>) to make everything
happy, just uninline the silly core dump helper functions and move the
bodies to fs/exec.c where they make a lot more sense.
dump_seek() in particular was too big to be an inline function anyway,
and none of them are in any way performance-critical. And we really
don't need to mess up our include file headers more than they already
are.
Reported-and-tested-by: Tony Luck <tony.luck@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 14 Oct 2010 18:19:44 +0000 (11:19 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
ehea: Fix a checksum issue on the receive path
net: allow FEC driver to use fixed PHY support
tg3: restore rx_dropped accounting
b44: fix carrier detection on bind
net: clear heap allocations for privileged ethtool actions
NET: wimax, fix use after free
ATM: iphase, remove sleep-inside-atomic
ATM: mpc, fix use after free
ATM: solos-pci, remove use after free
net/fec: carrier off initially to avoid root mount failure
r8169: use device model DMA API
r8169: allocate with GFP_KERNEL flag when able to sleep
Linus Torvalds [Thu, 14 Oct 2010 17:57:40 +0000 (10:57 -0700)]
Don't dump task struct in a.out core-dumps
akiphie points out that a.out core-dumps have that odd task struct
dumping that was never used and was never really a good idea (it goes
back into the mists of history, probably the original core-dumping
code). Just remove it.
Also do the access_ok() check on dump_write(). It probably doesn't
matter (since normal filesystems all seem to do it anyway), but he
points out that it's normally done by the VFS layer, so ...
[ I suspect that we should possibly do "vfs_write()" instead of
calling ->write directly. That also does the whole fsnotify and write
statistics thing, which may or may not be a good idea. ]
And just to be anal, do this all for the x86-64 32-bit a.out emulation
code too, even though it's not enabled (and won't currently even
compile)
Reported-by: akiphie <akiphie@lavabit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 13 Oct 2010 23:51:59 +0000 (16:51 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/djbw/async_tx
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
ioat2: fix performance regression
Linus Torvalds [Wed, 13 Oct 2010 23:51:29 +0000 (16:51 -0700)]
Merge branch 'for-2.6.36' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux:
nfsd: fix BUG at fs/nfsd/nfsfh.h:199 on unlink
Linus Torvalds [Wed, 13 Oct 2010 23:50:23 +0000 (16:50 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ring-buffer: Fix typo of time extends per page
perf, MIPS: Support cross compiling of tools/perf for MIPS
perf: Fix incorrect copy_from_user() usage
Linus Torvalds [Wed, 13 Oct 2010 23:35:33 +0000 (16:35 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: relax ioremap prohibition (
309caa9) for -final and -stable
ARM: 6440/1: ep93xx: DMA: fix channel_disable
cpuimx27: fix i2c bus selection
cpuimx27: fix compile when ULPI is selected
ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9
ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors
ARM: fix section mismatch warnings in Versatile Express
ARM: 6412/1: kprobes-decode: add support for MOVW instruction
ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags
ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption
Linus Torvalds [Wed, 13 Oct 2010 23:35:05 +0000 (16:35 -0700)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
omap: iommu-load cam register before flushing the entry
Linus Torvalds [Wed, 13 Oct 2010 23:34:46 +0000 (16:34 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: Silent spurious error message
drm/radeon/kms: fix bad cast/shift in evergreen.c
drm/radeon/kms: make TV/DFP table info less verbose
drm/radeon/kms: leave certain CP int bits enabled
drm/radeon/kms: avoid corner case issue with unmappable vram V2
Linus Torvalds [Wed, 13 Oct 2010 23:34:23 +0000 (16:34 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, numa: For each node, register the memory blocks actually used
x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order
x86, mce, therm_throt.c: Fix missing curly braces in error handling logic
Dan Williams [Wed, 13 Oct 2010 22:43:10 +0000 (15:43 -0700)]
ioat2: fix performance regression
Commit
0793448 "DMAENGINE: generic channel status v2" changed the interface for
how dma channel progress is retrieved. It inadvertently exported an internal
helper function ioat_tx_status() instead of ioat_dma_tx_status(). The latter
polls the hardware to get the latest completion state, while the helper just
evaluates the current state without touching hardware. The effect is that we
end up waiting for completion timeouts or descriptor allocation errors before
the completion state is updated.
iperf (before fix):
[SUM] 0.0-41.3 sec 364 MBytes 73.9 Mbits/sec
iperf (after fix):
[SUM] 0.0- 4.5 sec 499 MBytes 940 Mbits/sec
This is a regression starting with 2.6.35.
Cc: <stable@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: Richard Scobie <richard@sauce.co.nz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Breno Leitao [Thu, 7 Oct 2010 13:17:33 +0000 (13:17 +0000)]
ehea: Fix a checksum issue on the receive path
Currently we set all skbs with CHECKSUM_UNNECESSARY, even
those whose protocol we don't know. This patch just
add the CHECKSUM_COMPLETE tag for non TCP/UDP packets.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
J. Bruce Fields [Wed, 13 Oct 2010 18:46:17 +0000 (14:46 -0400)]
nfsd: fix BUG at fs/nfsd/nfsfh.h:199 on unlink
As of commit
43a9aa64a2f4330a9cb59aaf5c5636566bce067c "NFSD:
Fill in WCC data for REMOVE, RMDIR, MKNOD, and MKDIR", we sometimes call
fh_unlock on a filehandle that isn't fully initialized.
We should fix up the callers, but as a quick fix it is also sufficient
just to remove this assertion.
Reported-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Greg Ungerer [Mon, 11 Oct 2010 21:03:05 +0000 (21:03 +0000)]
net: allow FEC driver to use fixed PHY support
At least one board using the FEC driver does not have a conventional
PHY attached to it, it is directly connected to a somewhat simple
ethernet switch (the board is the SnapGear/LITE, and the attached
4-port ethernet switch is a RealTek RTL8305). This switch does not
present the usual register interface of a PHY, it presents nothing.
So a PHY scan will find nothing - it finds ID's of 0 for each PHY
on the attached MII bus.
After the FEC driver was changed to use phylib for supporting PHYs
it no longer works on this particular board/switch setup.
Add code support to use a fixed phy if no PHY is found on the MII bus.
This is based on the way the cpmac.c driver solved this same problem.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 12 Oct 2010 23:15:25 +0000 (00:15 +0100)]
ARM: relax ioremap prohibition (
309caa9) for -final and -stable
... but produce a big warning about the problem as encouragement
for people to fix their drivers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 12 Oct 2010 21:43:26 +0000 (22:43 +0100)]
Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6
Mika Westerberg [Tue, 12 Oct 2010 09:37:59 +0000 (10:37 +0100)]
ARM: 6440/1: ep93xx: DMA: fix channel_disable
When channel_disable() is called, it disables per channel interrupts and
waits until channels state becomes STATE_STALL, and then disables the
channel. Now, if the DMA transfer is disabled while the channel is in
STATE_NEXT we will not wait anything and disable the channel immediately.
This seems to cause weird data corruption for example in audio transfers.
Fix is to wait while we are in STATE_NEXT or STATE_ON and only then
disable the channel.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Tue, 12 Oct 2010 16:16:01 +0000 (09:16 -0700)]
Merge branch 'kvm-updates/2.6.36' of git://git./virt/kvm/kvm
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Move TSC reset out of vmcb_init
KVM: x86: Fix SVM VMCB reset
Steven Rostedt [Tue, 12 Oct 2010 16:06:43 +0000 (12:06 -0400)]
ring-buffer: Fix typo of time extends per page
Time stamps for the ring buffer are created by the difference between
two events. Each page of the ring buffer holds a full 64 bit timestamp.
Each event has a 27 bit delta stamp from the last event. The unit of time
is nanoseconds, so 27 bits can hold ~134 milliseconds. If two events
happen more than 134 milliseconds apart, a time extend is inserted
to add more bits for the delta. The time extend has 59 bits, which
is good for ~18 years.
Currently the time extend is committed separately from the event.
If an event is discarded before it is committed, due to filtering,
the time extend still exists. If all events are being filtered, then
after ~134 milliseconds a new time extend will be added to the buffer.
This can only happen till the end of the page. Since each page holds
a full timestamp, there is no reason to add a time extend to the
beginning of a page. Time extends can only fill a page that has actual
data at the beginning, so there is no fear that time extends will fill
more than a page without any data.
When reading an event, a loop is made to skip over time extends
since they are only used to maintain the time stamp and are never
given to the caller. As a paranoid check to prevent the loop running
forever, with the knowledge that time extends may only fill a page,
a check is made that tests the iteration of the loop, and if the
iteration is more than the number of time extends that can fit in a page
a warning is printed and the ring buffer is disabled (all of ftrace
is also disabled with it).
There is another event type that is called a TIMESTAMP which can
hold 64 bits of data in the theoretical case that two events happen
18 years apart. This code has not been implemented, but the name
of this event exists, as well as the structure for it. The
size of a TIMESTAMP is 16 bytes, where as a time extend is only
8 bytes. The macro used to calculate how many time extends can fit on
a page used the TIMESTAMP size instead of the time extend size
cutting the amount in half.
The following test case can easily trigger the warning since we only
need to have half the page filled with time extends to trigger the
warning:
# cd /sys/kernel/debug/tracing/
# echo function > current_tracer
# echo 'common_pid < 0' > events/ftrace/function/filter
# echo > trace
# echo 1 > trace_marker
# sleep 120
# cat trace
Enabling the function tracer and then setting the filter to only trace
functions where the process id is negative (no events), then clearing
the trace buffer to ensure that we have nothing in the buffer,
then write to trace_marker to add an event to the beginning of a page,
sleep for 2 minutes (only 35 seconds is probably needed, but this
guarantees the bug), and then finally reading the trace which will
trigger the bug.
This patch fixes the typo and prevents the false positive of that warning.
Reported-by: Hans J. Koch <hjk@linutronix.de>
Tested-by: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:33:33 +0000 (19:33 +0800)]
perf, MIPS: Support cross compiling of tools/perf for MIPS
Changes:
v4: Fix the cosmetic issue of redundant dot-ops
v3: Change rmb() to use SYNC
v2: Include mips unistd.h and define rmb()/cpu_relax() in tools/perf/perf.h
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jean Delvare [Fri, 8 Oct 2010 12:34:49 +0000 (14:34 +0200)]
drm/radeon/kms: Silent spurious error message
I see the following error message in my kernel log from time to time:
radeon 0000:07:00.0:
ffff88007c334000 reserve failed for wait
radeon 0000:07:00.0:
ffff88007c334000 reserve failed for wait
After investigation, it turns out that there's nothing to be afraid of
and everything works as intended. So remove the spurious log message.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 11 Oct 2010 16:41:32 +0000 (12:41 -0400)]
drm/radeon/kms: fix bad cast/shift in evergreen.c
Missing parens.
fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=30718
Reported-by: Dave Gilbert <freedesktop@treblig.org>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 8 Oct 2010 02:38:42 +0000 (22:38 -0400)]
drm/radeon/kms: make TV/DFP table info less verbose
Make TV standard and DFP table revisions debug only.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 8 Oct 2010 16:09:12 +0000 (12:09 -0400)]
drm/radeon/kms: leave certain CP int bits enabled
These bits are used for internal communication and should
be left enabled. This may fix s/r issues on some systems.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Tue, 10 Aug 2010 21:41:31 +0000 (17:41 -0400)]
drm/radeon/kms: avoid corner case issue with unmappable vram V2
We should not allocate any object into unmappable vram if we
have no means to access them which on all GPU means having the
CP running and on newer GPU having the blit utility working.
This patch limit the vram allocation to visible vram until
we have acceleration up and running.
Note that it's more than unlikely that we run into any issue
related to that as when acceleration is not woring userspace
should allocate any object in vram beside front buffer which
should fit in visible vram.
V2 use real_vram_size as mc_vram_size could be bigger than
the actual amount of vram
[airlied: fixup r700_cp_stop case]
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
John Blackwood [Tue, 28 Sep 2010 22:03:11 +0000 (18:03 -0400)]
perf: Fix incorrect copy_from_user() usage
perf events: repair incorrect use of copy_from_user
This makes the perf_event_period() return 0 instead of
-EFAULT on success.
Signed-off-by: John Blackwood<john.blackwood@ccur.com>
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <
20100928220311.GA18145@tsunami.ccur.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Eric Paris [Mon, 11 Oct 2010 22:13:31 +0000 (18:13 -0400)]
fanotify: disable fanotify syscalls
This patch disables the fanotify syscalls by just not building them and
letting the cond_syscall() statements in kernel/sys_ni.c redirect them
to sys_ni_syscall().
It was pointed out by Tvrtko Ursulin that the fanotify interface did not
include an explicit prioritization between groups. This is necessary
for fanotify to be usable for hierarchical storage management software,
as they must get first access to the file, before inotify-like notifiers
see the file.
This feature can be added in an ABI compatible way in the next release
(by using a number of bits in the flags field to carry the info) but it
was suggested by Alan that maybe we should just hold off and do it in
the next cycle, likely with an (new) explicit argument to the syscall.
I don't like this approach best as I know people are already starting to
use the current interface, but Alan is all wise and noone on list backed
me up with just using what we have. I feel this is needlessly ripping
the rug out from under people at the last minute, but if others think it
needs to be a new argument it might be the best way forward.
Three choices:
Go with what we got (and implement the new feature next cycle). Add a
new field right now (and implement the new feature next cycle). Wait
till next cycle to release the ABI (and implement the new feature next
cycle). This is number 3.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Sun, 10 Oct 2010 19:55:52 +0000 (19:55 +0000)]
tg3: restore rx_dropped accounting
commit
511d22247be7 (tg3: 64 bit stats on all arches), overlooked the
rx_dropped accounting.
We use a full "struct rtnl_link_stats64" to hold rx_dropped value, but
forgot to report it in tg3_get_stats64().
Use an "unsigned long" instead to shrink "struct tg3" by 176 bytes, and
report this value to stats readers.
Increment rx_dropped counter for oversized frames.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Michael Chan <mchan@broadcom.com>
CC: Matt Carlson <mcarlson@broadcom.com>
Acked-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Fertser [Mon, 11 Oct 2010 22:45:35 +0000 (15:45 -0700)]
b44: fix carrier detection on bind
For carrier detection to work properly when binding the driver with a cable
unplugged, netif_carrier_off() should be called after register_netdev(),
not before.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yinghai Lu [Mon, 11 Oct 2010 02:52:15 +0000 (19:52 -0700)]
x86, numa: For each node, register the memory blocks actually used
Russ reported SGI UV is broken recently. He said:
| The SRAT table shows that memory range is spread over two nodes.
|
| SRAT: Node 0 PXM 0
100000000-
800000000
| SRAT: Node 1 PXM 1
800000000-
1000000000
| SRAT: Node 0 PXM 0
1000000000-
1080000000
|
|Previously, the kernel early_node_map[] would show three entries
|with the proper node.
|
|[ 0.000000] 0: 0x00100000 -> 0x00800000
|[ 0.000000] 1: 0x00800000 -> 0x01000000
|[ 0.000000] 0: 0x01000000 -> 0x01080000
|
|The problem is recent community kernel early_node_map[] shows
|only two entries with the node 0 entry overlapping the node 1
|entry.
|
| 0: 0x00100000 -> 0x01080000
| 1: 0x00800000 -> 0x01000000
After looking at the changelog, Found out that it has been broken for a while by
following commit
|commit
8716273caef7f55f39fe4fc6c69c5f9f197f41f1
|Author: David Rientjes <rientjes@google.com>
|Date: Fri Sep 25 15:20:04 2009 -0700
|
| x86: Export srat physical topology
Before that commit, register_active_regions() is called for every SRAT memory
entry right away.
Use nodememblk_range[] instead of nodes[] in order to make sure we
capture the actual memory blocks registered with each node. nodes[]
contains an extended range which spans all memory regions associated
with a node, but that does not mean that all the memory in between are
included.
Reported-by: Russ Anderson <rja@sgi.com>
Tested-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <
4CB27BDF.
5000800@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org> 2.6.33 .34 .35 .36
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Kees Cook [Mon, 11 Oct 2010 19:23:25 +0000 (12:23 -0700)]
net: clear heap allocations for privileged ethtool actions
Several other ethtool functions leave heap uncleared (potentially) by
drivers. Some interfaces appear safe (eeprom, etc), in that the sizes
are well controlled. In some situations (e.g. unchecked error conditions),
the heap will remain unchanged in areas before copying back to userspace.
Note that these are less of an issue since these all require CAP_NET_ADMIN.
Cc: stable@kernel.org
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Slaby [Sun, 10 Oct 2010 23:26:58 +0000 (23:26 +0000)]
NET: wimax, fix use after free
Stanse found that i2400m_rx frees skb, but still uses skb->len even
though it has skb_len defined. So use skb_len properly in the code.
And also define it unsinged int rather than size_t to solve
compilation warnings.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: linux-wimax@intel.com
Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Slaby [Sun, 10 Oct 2010 23:26:57 +0000 (23:26 +0000)]
ATM: iphase, remove sleep-inside-atomic
Stanse found that ia_init_one locks a spinlock and inside of that it
calls ia_start which calls:
* request_irq
* tx_init which does kmalloc(GFP_KERNEL)
Both of them can thus sleep and result in a deadlock. I don't see a
reason to have a per-device spinlock there which is used only there
and inited right before the lock location. So remove it completely.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Slaby [Sun, 10 Oct 2010 22:46:34 +0000 (22:46 +0000)]
ATM: mpc, fix use after free
Stanse found that mpc_push frees skb and then it dereferences it. It
is a typo, new_skb should be dereferenced there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Slaby [Sun, 10 Oct 2010 21:50:44 +0000 (21:50 +0000)]
ATM: solos-pci, remove use after free
Stanse found we do in console_show:
kfree_skb(skb);
return skb->len;
which is not good. Fix that by remembering the len and use it in the
function instead.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Chas Williams <chas@cmf.nrl.navy.mil>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 11 Oct 2010 17:19:24 +0000 (10:19 -0700)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: fix oldnoconfig to do the right thing
kconfig: Temporarily disable dependency warnings
kconfig: delay symbol direct dependency initialization
This page took 0.0464 seconds and 5 git commands to generate.