John Gilmore [Wed, 2 Sep 1992 08:51:17 +0000 (08:51 +0000)]
* ser-termios.c, ser-go32.c: Remove DEFUN crap, clean up.
* serial.h (EXFUN): Remove all uses, convert to PARAMS.
* config/sun4os4.mh: Include ser-termios.o. FIXME, all .mh files
should include a ser-XXX.o module.
* dbxread.c (elfstab_build_psymtabs): Remove DEFUN crap.
* defs.h, i960-pinsn.c, remote-hms.c: Replace CONST with simple const.
* configure.in: Map unrecognized sun 68k's, sun sparcs, into
known suns in configure.in, rather than mapping them to unique
config files that happen to duplicate other config files.
* config/sun3.{mh,mt}: Remove (use identical sun3os4.*).
* config/sun4.{mh,mt}: Remove (use identical sun4os4.*).
John Gilmore [Wed, 2 Sep 1992 08:04:32 +0000 (08:04 +0000)]
* config/m68k-un.mt, config/m68k-noun.mt, config/sparc-un.mt,
config/sparc-noun.mt: New target configs for embedded.
* config/sun4os3.{mh,mt}: Remove, never existed in production.
John Gilmore [Wed, 2 Sep 1992 08:03:42 +0000 (08:03 +0000)]
* configure.in (*-*-sunos*): Use trailing * to match all
sub-variants of SunOS, e.g. sunos4* to match sunos4.1.1.
(sparc-*-sunos3): Remove host & target. Sunos3 never shipped
in production on Sun-4.
({a29k,i[34]86,i960}-*-elf): Add targets, equivalent to coff.
(m68k-*-{aout,coff,elf}): Add targets, w/new config and tm files.
(sparc-*-{aout,coff,elf}): Add targets, w/new config and tm files.
* tm-68k-un.h, tm-68k-noun.h, tm-spc-un.h, tm-spc-noun.h: New
target definitions for embedded with and without underlines on
identifiers. FIXME -- this ought to be known by BFD instead.
* tm-sparc.h, tm-sun2.h, tm-sun3.h: Delete NAMES_HAVE_UNDERSCORE:
not a parameter of the CPU, but of the development environment.
* tm-es1800.h, tm-sunos.h, tm-vx68.h: Add NAMES_HAVE_UNDERSCORE.
Per Bothner [Wed, 2 Sep 1992 07:27:31 +0000 (07:27 +0000)]
* Makefile.in: Added mostlyclean/clean/distclean rules.
Per Bothner [Wed, 2 Sep 1992 07:26:15 +0000 (07:26 +0000)]
* Makefile.in: Added mostlyclean, distclean rules,
and cleaned up clean, realclean.
Per Bothner [Wed, 2 Sep 1992 06:45:13 +0000 (06:45 +0000)]
* ldmisc.c (xrealloc): New (needed by ../libiberty/cplus.dem.c).
* ldlex.l: Moved comment() to end, since some compilers
otherwise have problems with input() used before it is defined.
Roland Pesch [Wed, 2 Sep 1992 04:08:28 +0000 (04:08 +0000)]
Formatting improvements and other minor edits.
John Gilmore [Wed, 2 Sep 1992 02:31:52 +0000 (02:31 +0000)]
* breakpoint.c (breakpoint_re_set): Avoid setting source symtab
(which involves reading in main's symtab) if we have no breakpoints.
David D. Zuhn [Wed, 2 Sep 1992 00:49:47 +0000 (00:49 +0000)]
new configure triple work, added solaris 2 & irix host support, fix FLEX definition
Per Bothner [Tue, 1 Sep 1992 23:10:08 +0000 (23:10 +0000)]
Removed cplus-dem.[ch]. (These are now in ../libiberty.)
Steve Chamberlain [Tue, 1 Sep 1992 22:49:37 +0000 (22:49 +0000)]
* Makefile.in: all-opcodes, cd into the right directory
Per Bothner [Tue, 1 Sep 1992 22:32:28 +0000 (22:32 +0000)]
This seems to have been overlooked in my last check-in.
Per Bothner [Tue, 1 Sep 1992 22:14:49 +0000 (22:14 +0000)]
Add scripts.
Per Bothner [Tue, 1 Sep 1992 22:14:24 +0000 (22:14 +0000)]
Add isc-sysv3.2.sc.
Per Bothner [Tue, 1 Sep 1992 22:07:32 +0000 (22:07 +0000)]
Remove non-existant file hp300bsd.mh.
Per Bothner [Tue, 1 Sep 1992 20:42:42 +0000 (20:42 +0000)]
Note previous change (removing oasys from target_vector).
Per Bothner [Tue, 1 Sep 1992 20:42:11 +0000 (20:42 +0000)]
* targets.c (target_vector): Take out oasys (unless that is
the default): Because there is no magic number in archives,
there can be annoying target mis-matches.
Ian Lance Taylor [Tue, 1 Sep 1992 01:17:01 +0000 (01:17 +0000)]
Brought forward from p3:
Sun Aug 30 21:38:53 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: map "ld" through program_transform_name when
installing.
Ian Lance Taylor [Tue, 1 Sep 1992 01:16:25 +0000 (01:16 +0000)]
Brought forward from p3:
Sun Aug 30 21:32:17 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: map "gdb" through program_transform_name when
installing.
Ian Lance Taylor [Tue, 1 Sep 1992 01:14:04 +0000 (01:14 +0000)]
Brought forward from p3:
Sun Aug 30 21:24:46 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: map "as" through program_transform_name when
installing.
Ian Lance Taylor [Tue, 1 Sep 1992 01:13:11 +0000 (01:13 +0000)]
Brought forward from p3:
Sun Aug 30 21:18:59 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: map program names through program_transform_name
when installing.
Ian Lance Taylor [Tue, 1 Sep 1992 01:12:41 +0000 (01:12 +0000)]
Sun Aug 30 21:12:11 1992 Ian Lance Taylor (ian@cygnus.com)
* configure: added -program_transform_name option, used as
argument to sed when installing programs.
configure.texi: added documentation for -program_prefix,
-program_suffix and -program_transform_name.
Mike Werner [Mon, 31 Aug 1992 23:23:34 +0000 (23:23 +0000)]
Link libopcodes with objdump
Mike Werner [Mon, 31 Aug 1992 23:19:34 +0000 (23:19 +0000)]
get the order of opcodes + binutils right so that everything builds
Steve Chamberlain [Mon, 31 Aug 1992 22:53:15 +0000 (22:53 +0000)]
#include file moved
Steve Chamberlain [Mon, 31 Aug 1992 22:28:08 +0000 (22:28 +0000)]
Disassemble for z8k and build using opcode library
Steve Chamberlain [Mon, 31 Aug 1992 22:26:18 +0000 (22:26 +0000)]
Support for opcodes directory
Steve Chamberlain [Mon, 31 Aug 1992 21:54:31 +0000 (21:54 +0000)]
* z8k-dis.c: knows how to disassemble z8k stuff
Fred Fish [Mon, 31 Aug 1992 20:50:45 +0000 (20:50 +0000)]
* dwarfread.c (cu_language): New local variable to record
language for current compilation unit being processed.
* dwarfread.c (set_cu_language): New local function to decode
and record language for current compilation unit being processed.
* dwarfread.c (synthesize_typedef): Add local function to
synthesize a typedef for C++ classes, structs, unions, and
enumerations.
* dwarfread.c (read_structure_scope): Synthesize typedefs
for C++ classes, structs and unions.
* dwarfread.c (read_enumeration): Synthesize typedefs for
C++ enumerations.
* dwarfread.c (read_file_scope): Call set_cu_language to
record language for current compilation unit. After symtab
is built, save this recorded language.
* dwarfread.c (process_dies, add_partial_symbol, struct_type,
scan_partial_symbols, new_symbol): Recognize TAG_class_type.
* dwarfread.c (add_partial_symbol): Synthesize partial symbol
typedefs for C++ classes, structs, unions, and enumerations.
* dwarfread.c (scan_compilation_units): Call set_cu_language
to record language for current compilation unit.
* dwarfread.c (scan_partial_symbols): Call add_enum_psymbol here
for TAG_enumeration_types, rather than in add_partial_symbol.
* dwarfread.c (add_partial_symbol): Combine TAG_enumeration_type
case with class, struct, and union type cases, now that they are
the same. Remove tests for non-NULL name attributes, now done
by callers.
* gdbtypes.h (TYPE_CODE_CLASS): Add type for C++ classes, but
treat as alias for TYPE_CODE_STRUCT for now.
Steve Chamberlain [Mon, 31 Aug 1992 20:48:44 +0000 (20:48 +0000)]
* z8k-opc.h: new file full of z8000 opcodes
Jim Wilson [Mon, 31 Aug 1992 17:14:50 +0000 (17:14 +0000)]
Update to SPARC Version 9 Draft 1.0.4.
Jim Wilson [Mon, 31 Aug 1992 17:03:47 +0000 (17:03 +0000)]
Handle new v9 insn argument codes, and delete support for obsolete ones.
Otherwise not updated or tested, since v9 support is obviously incomplete,
and it can't possibly work right without some effort.
Steve Chamberlain [Mon, 31 Aug 1992 15:10:34 +0000 (15:10 +0000)]
* aoutx.h (aout<n>swap_ext_reloc_out), bout.c
(b_out_squirt_out_relocs): fix bug 1506 where abs symbols attached
to the built-in abs_section were not written out correctly.
Fred Fish [Mon, 31 Aug 1992 04:22:46 +0000 (04:22 +0000)]
* {i386-tdep.c, m68k-tdep.c, mips-tdep.c, sparc-tdep.c}
(supply_gregset, fill_gregset, supply_fpregset, fill_fpregset):
Use "regi" for local indexing through register numbers, reserving
"regno" for the name of a specific register passed as an input
parameter. Fix bug propagated through all versions that sometimes
used regno as an index when it should have been regi, thus using
-1 as an index in some cases.
Per Bothner [Mon, 31 Aug 1992 03:34:15 +0000 (03:34 +0000)]
* gprof.h, gprof.c, printfgprof.c: Add support for two
output styles: The default is similar to the old FSF gprof,
while -T sets the variable bsd_style_output, which causes
output matching Berkeley's gprof. The biggest differences
are that with the FSF style output, the flat profile comes
before the call graph; numbers come before explanations;
and there is less gratuitous white space.
* gprof.h, gprof.c, printfgprof.c: New discard_underscores
variable causes discarding of initial underscores when
printing symbol names. It is set unless there is a "main"
symbol (without an underscore).
* printfgprof.c: New function printnameonly(), called
by printname(). It handles stripping of initial '_',
as well as C++ name-demangling.
* gprof.callg, gprof.flat, make-c-prog.awk: Removed.
It is just as convenient to edit blurbs.c directly.
* Makefile.in: Removed rule for making blurbs.c.
* blurbs.c: This is now a true source file (as opposed
to being generated from gprof.callg and gprof.flat).
Change style to use one long string literal, instead of
one literal per output line. Add FSF-style blurb for call graph.
Per Bothner [Mon, 31 Aug 1992 01:23:24 +0000 (01:23 +0000)]
* cplus-dem.c, demangle.h: Moved to ../libiberty and ../include,
respectively, so same demangler can be used by other programs.
* Makefile.in: Remove demangler stuff.
* Makefile.in (depend): Pass -I../readline (needed for main.c).
* demangle.c (_initialize_demangler): Tell demangler which
CPLUS_MARKER to assume.
David D. Zuhn [Mon, 31 Aug 1992 01:21:57 +0000 (01:21 +0000)]
removed debugging code accidentally checked in
Per Bothner [Mon, 31 Aug 1992 01:14:44 +0000 (01:14 +0000)]
* cplus-dem.c: Removed. Use the version in libiberty now.
* ldmisc.c: Use new libiberty version of cplus_demangle().
Per Bothner [Mon, 31 Aug 1992 01:11:18 +0000 (01:11 +0000)]
* Makefile.in: Bump to versions 1.97.90.
* cplus-dem.c: Removed. Was nowhere used - and if some
programs are changed to to demangling should now use the
versions in libiberty.
David D. Zuhn [Mon, 31 Aug 1992 01:07:24 +0000 (01:07 +0000)]
changes tests from -d foo to -f foo/Makefile
Per Bothner [Mon, 31 Aug 1992 00:57:03 +0000 (00:57 +0000)]
* demangle.h: New file, moved from ../gdb. Made independent
of gdb. Allow demangling style option to be passed as a
parameter to cplus_demangle(), but using the
current_demangling_style global as the default.
Jim Wilson [Mon, 31 Aug 1992 00:27:23 +0000 (00:27 +0000)]
Keep sparc.mt.
Jim Wilson [Mon, 31 Aug 1992 00:01:22 +0000 (00:01 +0000)]
Resolve someone else's CVS update conflict.
Jim Wilson [Sat, 29 Aug 1992 19:12:04 +0000 (19:12 +0000)]
Make as.new depend on LOCAL_LOADLIBES.
Fred Fish [Sat, 29 Aug 1992 17:10:29 +0000 (17:10 +0000)]
* obstack.h: Merge comment change from current FSF version.
John Gilmore [Sat, 29 Aug 1992 04:22:31 +0000 (04:22 +0000)]
Minor bug fixes from last big checkin.
John Gilmore [Sat, 29 Aug 1992 00:33:47 +0000 (00:33 +0000)]
RS/6000 portability changes (for hosting cross-debuggers).
* config/rs6000.mh (XDEPFILES): Move xcoffexec.o to target side.
(XM_CLIBS): Add -lm to circumvent AIX 3.2 libc ldexp bug.
* config/rs6000.mt (TDEPFILES): Adopt xcoffexec.o.
John Gilmore [Sat, 29 Aug 1992 00:32:58 +0000 (00:32 +0000)]
RS/6000 portability changes (for hosting cross-debuggers).
* breakpoint.c (fixup_breakpoints): Re-kludge to IBM6000_TARGET.
* buildsym.c, rs6000-xdep.c, rs6000-tdep.c, tm-rs6000.h,
xcoffexec.c, xcoffread.c: Rename aixcoff to xcoff everywhere.
* printcmd.c (print_frame_args): Remove an RS/6000 dependency.
* stabsread.c (define_symbol): Remove RS/6000 dependencies.
* tm-rs6000.h (ATTACH_DETACH): Remove: host-dependent.
(PTRACE_ATTACH, PTRACE_DETACH): Remove: host-dep.
(NO_SINGLE_STEP): Add, target-dependent.
(loadinfotextindex): Lowercase, remove "aix_".
* xm-rs6000.h: Add <sys/ptrace.h> for infptrace.c.
(NO_SINGLE_STEP): Remove, target-dependent.
* xcoffexec.c (vmap_symtab): Cleanup #if 0'd code.
* xcoffread.c: Only build file if RS/6000 native GDB.
(build_function_symbol): Remove #if 0'd code.
* rs6000-tdep.c: Cleanup. Add static fn protos.
Use CORE_ADDR for addresses throughout. Make void fns void.
(pop_dummy_frame): Add FIXME about bogosity of design here.
(rs6000_struct_return_address): Ditto.
(frameless_function_invocation, frame_get_cache_fsr,
frame_initial_stack_address, xcoff_relocate_symtab,
xcoff_init_loadinfo, free_loadinfo, xcoff_add_toc_to_loadinfo,
add_text_to_loadinfo, find_toc_address): Move from xdep file.
Use CORE_ADDRs. Change identifiers to lowercase.
* rs6000-xdep.c: Make whole file conditional on native RS/6000,
supplying dummy routines if non-native. Add prototype for
static exec_one_dummy_insn. Move a mess of functions to
rs6000-tdep.c (as above). Remove #if 0'd code.
* config/rs6000.mh (XDEPFILES): Move xcoffexec.o to target side.
(XM_CLIBS): Add -lm to circumvent AIX 3.2 libc ldexp bug.
* config/rs6000.mt (TDEPFILES): Adopt xcoffexec.o.
John Gilmore [Sat, 29 Aug 1992 00:31:10 +0000 (00:31 +0000)]
* gdbtypes.h (TYPE_ALLOC): Parenthesize result to avoid problems
for callers.
John Gilmore [Sat, 29 Aug 1992 00:28:56 +0000 (00:28 +0000)]
RS/6000 portability changes (for hosting cross-debuggers).
* breakpoint.c (fixup_breakpoints): Re-kludge to IBM6000_TARGET.
* buildsym.c, rs6000-xdep.c, rs6000-tdep.c, tm-rs6000.h,
xcoffexec.c, xcoffread.c: Rename aixcoff to xcoff everywhere.
* printcmd.c (print_frame_args): Remove an RS/6000 dependency.
* stabsread.c (define_symbol): Remove RS/6000 dependencies.
* tm-rs6000.h (ATTACH_DETACH): Remove: host-dependent.
(PTRACE_ATTACH, PTRACE_DETACH): Remove: host-dep.
(NO_SINGLE_STEP): Add, target-dependent.
(loadinfotextindex): Lowercase, remove "aix_".
* xm-rs6000.h: Add <sys/ptrace.h> for infptrace.c.
(NO_SINGLE_STEP): Remove, target-dependent.
* xcoffexec.c (vmap_symtab): Cleanup #if 0'd code.
* xcoffread.c: Only build file if RS/6000 native GDB.
(build_function_symbol): Remove #if 0'd code.
* rs6000-tdep.c: Cleanup. Add static fn protos.
Use CORE_ADDR for addresses throughout. Make void fns void.
(pop_dummy_frame): Add FIXME about bogosity of design here.
(rs6000_struct_return_address): Ditto.
(frameless_function_invocation, frame_get_cache_fsr,
frame_initial_stack_address, xcoff_relocate_symtab,
xcoff_init_loadinfo, free_loadinfo, xcoff_add_toc_to_loadinfo,
add_text_to_loadinfo, find_toc_address): Move from xdep file.
Use CORE_ADDRs. Change identifiers to lowercase.
* rs6000-xdep.c: Make whole file conditional on native RS/6000,
supplying dummy routines if non-native. Add prototype for
static exec_one_dummy_insn. Move a mess of functions to
rs6000-tdep.c (as above). Remove #if 0'd code.
* config/rs6000.mh (XDEPFILES): Move xcoffexec.o to target side.
(XM_CLIBS): Add -lm to circumvent AIX 3.2 libc ldexp bug.
* config/rs6000.mt (TDEPFILES): Adopt xcoffexec.o.
* gdbtypes.h (TYPE_ALLOC): Parenthesize result to avoid problems
for callers.
Ian Lance Taylor [Sat, 29 Aug 1992 00:17:55 +0000 (00:17 +0000)]
Fri Aug 28 16:29:15 1992 Ian Lance Taylor (ian@cygnus.com)
* archive.c (bfd_slurp_bsd_armap): if the symdef_count is too
large, assume we're using a swapped byte order and fail with
wrong_format rather than dumping core.
Ian Lance Taylor [Sat, 29 Aug 1992 00:17:29 +0000 (00:17 +0000)]
Update ChangeLog, removing yesterday's 960 change and putting in
todays (960 now always uses little endian ordering).
Ian Lance Taylor [Sat, 29 Aug 1992 00:16:47 +0000 (00:16 +0000)]
Fri Aug 28 16:25:22 1992 Ian Lance Taylor (ian@cygnus.com)
* obj-bout.h, obj-bout.c (obj_header_append, obj_symbol_to_chars),
tc-i960.c (md_ri_to_chars): Always output bout object file in
little endian byte order (used to use endianness of host).
Ian Lance Taylor [Fri, 28 Aug 1992 22:54:13 +0000 (22:54 +0000)]
Back out the HOST_BIG_ENDIAN_P changes I put in yesterday.
Ken Raeburn [Fri, 28 Aug 1992 22:44:19 +0000 (22:44 +0000)]
Missed one...
Ken Raeburn [Fri, 28 Aug 1992 22:42:58 +0000 (22:42 +0000)]
Renamed opc-sparc.c to sparc-opc.c for more significant characters in cpu
name under losing file systems ("sparc-op" rather than "opc-spar").
Sean Eric Fagan [Fri, 28 Aug 1992 21:27:32 +0000 (21:27 +0000)]
-S flag is no longer supported (nor needed) with flex.
Ian Lance Taylor [Fri, 28 Aug 1992 21:10:36 +0000 (21:10 +0000)]
Back out yesterday's change for using host endian order in 960 bout files.
Brendan Kehoe [Fri, 28 Aug 1992 21:01:47 +0000 (21:01 +0000)]
Forgot to add we32k.h.
Brendan Kehoe [Fri, 28 Aug 1992 21:01:11 +0000 (21:01 +0000)]
Forgot to list the we32k files in .Sanitize.
John Gilmore [Fri, 28 Aug 1992 20:16:45 +0000 (20:16 +0000)]
* vx-share/README, nindy-share/README: New files describing
how these directories' code is shared, and with whom.
(also 29k-share)
John Gilmore [Fri, 28 Aug 1992 20:16:23 +0000 (20:16 +0000)]
* vx-share/README, nindy-share/README: New files describing
how these directories' code is shared, and with whom.
Brendan Kehoe [Fri, 28 Aug 1992 17:17:33 +0000 (17:17 +0000)]
Last file for preliminary support of the we32k (AT&T 3b2 family).
John Gilmore [Fri, 28 Aug 1992 05:00:36 +0000 (05:00 +0000)]
Accept i486 where i386 ok.
John Gilmore [Fri, 28 Aug 1992 04:59:03 +0000 (04:59 +0000)]
* tm-altosgas.h, tm-i386v-g.h: Remove ancient coff encap configs.
* config/{altosgas.mt, i386v-g.mt, i386v32-g.mt}: Ditto.
* config/{i386sco.mt,i386v32.mt}: Remove; identical to i386v.mt.
* config/{go32.mt,i960.mt}: Remove; they only printed error msgs.
* config/nindy960.mt: Remove useless MT_CFLAGS setting.
* config/i386aout.mt: Use tm-i386v.h, not tm-i386v-g.h.
John Gilmore [Fri, 28 Aug 1992 04:58:27 +0000 (04:58 +0000)]
* configure.in (target configurations): Reformat into table.
Remove unsupp. Amigados host and target. Ditto Mach 386 target.
* tm-altosgas.h, tm-i386v-g.h: Remove ancient coff encap configs.
* config/{altosgas.mt, i386v-g.mt, i386v32-g.mt}: Ditto.
* config/{i386sco.mt,i386v32.mt}: Remove; identical to i386v.mt.
* config/{go32.mt,i960.mt}: Remove; they only printed error msgs.
* config/nindy960.mt: Remove useless MT_CFLAGS setting.
* config/i386aout.mt: Use tm-i386v.h, not tm-i386v-g.h.
* Makefile.in (config-check): Add command to check whether
configure.in is consistent with config/*.
John Gilmore [Fri, 28 Aug 1992 02:00:26 +0000 (02:00 +0000)]
Remove -gas variants; GDB doesn't care. Cross-check with config/*.mh
to make sure all .mh files are represented and vice verse.
Ian Lance Taylor [Fri, 28 Aug 1992 00:08:35 +0000 (00:08 +0000)]
Thu Aug 27 16:38:42 1992 Ian Lance Taylor (ian@cygnus.com)
* gld960.em (gld960_choose_target): the target depends on
HOST_BIG_ENDIAN_P.
Ian Lance Taylor [Fri, 28 Aug 1992 00:08:13 +0000 (00:08 +0000)]
Thu Aug 27 17:01:04 1992 Ian Lance Taylor (ian@cygnus.com)
* targets.c, config/i960-bout.mt, hosts/*: added
HOST_BIG_ENDIAN_DEFAULT_VECTOR and
HOST_LITTLE_ENDIAN_DEFAULT_VECTOR because bout archive format
depends on the endianness of the host. Added #define
HOST_BIG_ENDIAN_P and #undef HOST_BIG_ENDIAN_P to a number of
configuration files in hosts/ (it was already in some).
Brendan Kehoe [Thu, 27 Aug 1992 22:19:51 +0000 (22:19 +0000)]
* config.sub: add we32k
Brendan Kehoe [Thu, 27 Aug 1992 22:11:48 +0000 (22:11 +0000)]
Add preliminary support for the we32k (AT&T 3b2).
Brendan Kehoe [Thu, 27 Aug 1992 22:09:30 +0000 (22:09 +0000)]
Add preliminary support for the we32k (AT&T 3b2 family).
Brendan Kehoe [Thu, 27 Aug 1992 22:08:01 +0000 (22:08 +0000)]
Add preliminary support for the we32k (AT&T 3b2 and family).
Brendan Kehoe [Thu, 27 Aug 1992 22:04:34 +0000 (22:04 +0000)]
* configure.in: add we32k
Mark Eichin [Thu, 27 Aug 1992 21:19:27 +0000 (21:19 +0000)]
correct use of bfd symbols
John Gilmore [Thu, 27 Aug 1992 04:15:42 +0000 (04:15 +0000)]
* configure.in (host configurations): Reformat nested cases into
easy-to-maintain table.
(altos-*-gas): Use -gas flag instead of OS "gas".
Steve Chamberlain [Thu, 27 Aug 1992 00:35:09 +0000 (00:35 +0000)]
* bout.c: added support for relaxable alignment relocs.
* seclet.c (rel, seclet_dump_seclet, seclet_dump): get the app to
pass down pointer to play area rather than use alloca
Steve Chamberlain [Thu, 27 Aug 1992 00:32:05 +0000 (00:32 +0000)]
* ldlang.c (lang_process): don't pass null pointers when
abs_output_section is what is required.
* ldwrite.c (ldwrite): use malloc to allocate the largest space
used, and pass that down.
* relax.c,relax.h (write_relaxnorel): use the passed malloc area rather
than alloca.
Fred Fish [Wed, 26 Aug 1992 23:05:55 +0000 (23:05 +0000)]
* cplus-dem.c: Reorder args to most local functions to make them
follow the consistent pattern of struct work_stuff pointer first,
followed by pointer into string being demangled, followed by
pointer to the string where the result is being stored, followed
by other args. Also generally replace most variables of name
"type" with "mangled" for consistency. They all pointed to the
same string but half were one name and half the other.
* cplus-dem.c (LONGERNAMES): Remove #ifndef's.
* cplus-dem.c (demangle_qualified): Rewrite to clean up and allow
use whenever a qualified name is being demangled.
* cplus-dem.c (do_type): Qualified names are treated similarly
to fundamental types, not as modifiers of fundamental types.
Steve Chamberlain [Wed, 26 Aug 1992 21:21:20 +0000 (21:21 +0000)]
* cpu-z8k.c (compatible): made static to reduce name space
polution.
Ken Raeburn [Wed, 26 Aug 1992 04:08:45 +0000 (04:08 +0000)]
* config/tc-m68k.c (init_table): Now const. Always include 68851
data, so that "bc" is available to 68040 cache instructions. Added
"tt0", "tt1", and
68ec030 variants.
(md_assemble): Complain if 68000 (only) and 68881 are specified.
(enum _register): Added TT0, TT1.
(m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
line number correctly in "internal error" messages. Don't print
architecture-mismatch message for operand errors.
From Colin Smith (colin@wrs.com):
* config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather than
install_operand.
Ken Raeburn [Wed, 26 Aug 1992 04:02:42 +0000 (04:02 +0000)]
* config/tc-m68k.c (init_table): Now const. Always include 68851
data, so that "bc" is available to 68040 cache instructions. Added
"tt0", "tt1", and
68ec030 variants.
(md_assemble): Complain if 68000 (only) and 68881 are specified.
(enum _register): Added TT0, TT1.
(m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
line number correctly in "internal error" messages. Don't print
architecture-mismatch message for operand errors.
From Colin Smith (colin@wrs.com):
* config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather than
install_operand.
Ken Raeburn [Wed, 26 Aug 1992 03:46:22 +0000 (03:46 +0000)]
m68k.h (m68ec030): Defined as alias for 68030.
(m68k_opcodes): New type characters "3" for 68030 MMU regs and "t" for
immediate 0-7 added. Set up some opcodes (ptest, bkpt) to use them.
Tightened description of "fmovex" to distinguish it from some "pmove"
encodings. Added "pmove" for 68030 MMU regs, cleaned up descriptions that
claimed versions were available for chips not supporting them. Added
"pmovefd".
sparc.h: Fixed up some comments.
Steve Chamberlain [Tue, 25 Aug 1992 22:23:20 +0000 (22:23 +0000)]
* internal.h: added #define for STYP_LIT, removed from a29k and
h8300.
Steve Chamberlain [Tue, 25 Aug 1992 22:16:39 +0000 (22:16 +0000)]
* listing.c (buffer_line): rewind to the start of include
files, they might be included twice.
Steve Chamberlain [Tue, 25 Aug 1992 22:12:54 +0000 (22:12 +0000)]
Support for the Z8k
Steve Chamberlain [Tue, 25 Aug 1992 22:09:47 +0000 (22:09 +0000)]
Regenerated after Z8000 addition
Steve Chamberlain [Tue, 25 Aug 1992 22:07:19 +0000 (22:07 +0000)]
Support for the Z8000
Steve Chamberlain [Tue, 25 Aug 1992 22:04:53 +0000 (22:04 +0000)]
Add basic support for the z8k:
* Makefile.in, archures.c, coffcode.h, configure.in, reloc.c,
section.c, targets.c,
Roland Pesch [Tue, 25 Aug 1992 21:20:06 +0000 (21:20 +0000)]
Markup changes to run through TeX without errors.
WARNING: (1) this has not yet been proofread as a printout---just eliminated
problems that TeX complained about.
(2) extraneous line breaks introduced in some examples, sometimes
in ridiculously long strings; this may falsify examples. Places
where I did this are marked by FIXME comments.
Roland Pesch [Tue, 25 Aug 1992 20:56:41 +0000 (20:56 +0000)]
Some improvements in Texinfo markup:
1) use makeinfo node defaulting
2) correct bad xref
3) use @display, @exdent, etc. as first approximation to Julia's
clever typewriter markup; **THIS WILL NEED STUDY AND REVISION**
4) introduce many nodes rather than ---- in "detailed reference" appendix
Stu Grossman [Tue, 25 Aug 1992 17:14:51 +0000 (17:14 +0000)]
Add sparc-stub.c to .Sanitize
Steve Chamberlain [Tue, 25 Aug 1992 15:40:52 +0000 (15:40 +0000)]
Move a patch which got put in the wrong place.
Fred Fish [Tue, 25 Aug 1992 15:13:55 +0000 (15:13 +0000)]
Update to make patches relative to current devo sources.
Stu Grossman [Tue, 25 Aug 1992 03:52:20 +0000 (03:52 +0000)]
* configure.in: Add sparclite as a target.
Stu Grossman [Tue, 25 Aug 1992 03:47:53 +0000 (03:47 +0000)]
* sparc-stub.c (handle_exception): Flush instruction cache just
before returning to the user. (hexToInt): Fix overzealous cleanup.
Steve Chamberlain [Mon, 24 Aug 1992 22:37:04 +0000 (22:37 +0000)]
* ar.c (map_over_members): if the element of the archive has a
null name, fill it in.
* nm.c (do_one_rel_file): only warn if a bfd's flags say there
will be symbols and there aren't any.
Ian Lance Taylor [Mon, 24 Aug 1992 22:32:46 +0000 (22:32 +0000)]
Renamed OSE configuration to ose.
Steve Chamberlain [Mon, 24 Aug 1992 21:53:04 +0000 (21:53 +0000)]
* ieee.c (ieee_get_symtab): always null terminate the symbol list,
lint.
Ian Lance Taylor [Mon, 24 Aug 1992 21:06:34 +0000 (21:06 +0000)]
Brought up from p3:
Mon Aug 24 14:05:14 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: don't create all directories for ``make install'';
let the subdirectories create the ones they need.
This page took 0.040723 seconds and 4 git commands to generate.