David Howells [Wed, 23 Aug 2006 00:06:09 +0000 (20:06 -0400)]
NFS: Return an error when starting the idmapping pipe
Return an error when starting the idmapping pipe so that we can detect it
failing.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
David Howells [Wed, 23 Aug 2006 00:06:09 +0000 (20:06 -0400)]
NFS: Rename nfs_server::nfs4_state
Rename nfs_server::nfs4_state to nfs_client as it will be used to represent the
client state for NFS2 and NFS3 also.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
David Howells [Wed, 23 Aug 2006 00:06:08 +0000 (20:06 -0400)]
NFS: Rename struct nfs4_client to struct nfs_client
Rename struct nfs4_client to struct nfs_client so that it can become the basis
for a general client record for NFS2 and NFS3 in addition to NFS4.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
David Howells [Wed, 23 Aug 2006 00:06:08 +0000 (20:06 -0400)]
NFS: Fix NFS4 callback up/down prototypes
Make the nfs_callback_up()/down() prototypes just do nothing if NFS4 is not
enabled. Also make the down function void type since we can't really do
anything if it fails.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
David Howells [Wed, 23 Aug 2006 00:06:08 +0000 (20:06 -0400)]
NFS: Disambiguate nfs_stat_to_errno()
Rename the NFS4 version of nfs_stat_to_errno() so that it doesn't conflict with
the common one used by NFS2 and NFS3.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
David Howells [Wed, 23 Aug 2006 00:06:07 +0000 (20:06 -0400)]
NFS: Fix up split of fs/nfs/inode.c
Fix ups for the splitting of the superblock stuff out of fs/nfs/inode.c,
including:
(*) Move the callback tcpport module param into callback.c.
(*) Move the idmap cache timeout module param into idmap.c.
(*) Changes to internal.h:
(*) namespace-nfs4.c was renamed to nfs4namespace.c.
(*) nfs_stat_to_errno() is in nfs2xdr.c, not nfs4xdr.c.
(*) nfs4xdr.c is contingent on CONFIG_NFS_V4.
(*) nfs4_path() is only uses if CONFIG_NFS_V4 is set.
Plus also:
(*) The sec_flavours[] table should really be const.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
David Howells [Wed, 23 Aug 2006 00:06:07 +0000 (20:06 -0400)]
NFS: Add dentry materialisation op
The attached patch adds a new directory cache management function that prepares
a disconnected anonymous function to be connected into the dentry tree. The
anonymous dentry is transferred the name and parentage from another dentry.
The following changes were made in [try #2]:
(*) d_materialise_dentry() now switches the parentage of the two nodes around
correctly when one or other of them is self-referential.
The following changes were made in [try #7]:
(*) d_instantiate_unique() has had the interior part split out as function
__d_instantiate_unique(). Callers of this latter function must be holding
the appropriate locks.
(*) _d_rehash() has been added as a wrapper around __d_rehash() to call it
with the most obvious hash list (the one from the name). d_rehash() now
calls _d_rehash().
(*) d_materialise_dentry() is now __d_materialise_dentry() and is static.
(*) d_materialise_unique() added to perform the combination of d_find_alias(),
d_materialise_dentry() and d_add_unique() that the NFS client was doing
twice, all within a single dcache_lock critical section. This reduces the
number of times two different spinlocks were being accessed.
The following further changes were made:
(*) Add the dentries onto their parents d_subdirs lists.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Tue, 25 Jul 2006 15:28:19 +0000 (11:28 -0400)]
NFS: Add an ACCESS cache memory shrinker
A pinned inode may in theory end up filling memory with cached ACCESS
calls. This patch ensures that the VM may shrink away the cache in these
particular cases.
The shrinker works by iterating through the list of inodes on the global
nfs_access_lru_list, and removing the least recently used access
cache entry until it is done (or until the entire cache is empty).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Tue, 25 Jul 2006 15:28:18 +0000 (11:28 -0400)]
NFS: Add a global LRU list for the ACCESS cache
...in order to allow the addition of a memory shrinker.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Tue, 25 Jul 2006 15:28:18 +0000 (11:28 -0400)]
NFS: Add a new ACCESS rpc call cache to the linux nfs client
The current access cache only allows one entry at a time to be cached for each
inode. Add a per-inode red-black tree in order to allow more than one to
be cached at a time.
Should significantly cut down the time spent in path traversal for shared
directories such as ${PATH}, /usr/share, etc.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Linus Torvalds [Sat, 23 Sep 2006 00:51:59 +0000 (17:51 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] statfs for cifs unix extensions no longer experimental
[CIFS] New POSIX locking code not setting rc properly to zero on successful
[CIFS] Support deep tree mounts (e.g. mounts to //server/share/path)
Linus Torvalds [Sat, 23 Sep 2006 00:50:50 +0000 (17:50 -0700)]
Merge /pub/scm/linux/kernel/git/davej/agpgart
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
[AGPGART] Rework AGPv3 modesetting fallback.
[AGPGART] Add suspend callback for i965
[AGPGART] Fix number of aperture sizes in 830 gart structs.
[AGPGART] Intel 965 Express support.
[AGPGART] agp.h: constify struct agp_bridge_data::version
[AGPGART] const'ify VIA AGP PCI table.
[AGPGART] CONFIG_PM=n slim: drivers/char/agp/intel-agp.c
[AGPGART] CONFIG_PM=n slim: drivers/char/agp/efficeon-agp.c
[AGPGART] Const'ify the agpgart driver version.
[AGPGART] remove private page protection map
Linus Torvalds [Sat, 23 Sep 2006 00:50:22 +0000 (17:50 -0700)]
Merge /pub/scm/linux/kernel/git/davej/cpufreq
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] sw_any_bug_dmi_table can be used on resume, so it isn't initdata
[CPUFREQ] Fix some more CPU hotplug locking.
[CPUFREQ] Workaround for BIOS bug in software coordination of frequency
[CPUFREQ] Longhaul - Add voltage scaling to driver
[CPUFREQ] Fix sparse warning in ondemand
[CPUFREQ] make drivers/cpufreq/cpufreq_ondemand.c:powersave_bias_target() static
[CPUFREQ] Longhaul - Add ignore_latency option
[CPUFREQ] Longhaul - Disable arbiter
[CPUFREQ][2/2] ondemand: updated add powersave_bias tunable
[CPUFREQ][1/2] ondemand: updated tune for hardware coordination
[CPUFREQ] Fix typo.
Al Viro [Sat, 23 Sep 2006 00:29:34 +0000 (01:29 +0100)]
[PATCH] fallout from hcd-core patch
missing le16_to_cpu()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Sat, 23 Sep 2006 00:27:30 +0000 (01:27 +0100)]
[PATCH] fix the survivors of fbcon_vbl_handler() renaming
In
|Author: James Simmons <jsimmons@kozmo.(none)>
|Date: Thu Mar 13 22:37:08 2003 -0800
|
| [FBCON] Cursor handling clean up. I nuked several static variables.
we have
-static void fbcon_vbl_handler(int irq, void *dummy, struct pt_regs *fp)
+static void fb_vbl_handler(int irq, void *dev_id, struct pt_regs *fp)
and 3 years later a couple of instances missed back then still remains
there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Sat, 23 Sep 2006 00:26:02 +0000 (01:26 +0100)]
[PATCH] sun4: fix sbus_setup_iommu()
iommu_init() and iounit_init() are never called for sun4, but that's not
enough - these calls should be ifdefed out since the functions in question
simply do not exist for CONFIG_SUN4 kernel.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Sat, 23 Sep 2006 00:25:18 +0000 (01:25 +0100)]
[PATCH] asm/backlight.h is ppc-only
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Sat, 23 Sep 2006 00:22:46 +0000 (01:22 +0100)]
[PATCH] sanitize frv archclean
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Sat, 23 Sep 2006 00:24:25 +0000 (01:24 +0100)]
[PATCH] aoa is pmac-only
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Sat, 23 Sep 2006 00:20:31 +0000 (01:20 +0100)]
[PATCH] memcpy_fromio() missing in istallion
memcpy() from iomem is a bad thing...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Sat, 23 Sep 2006 00:18:41 +0000 (01:18 +0100)]
[PATCH] fix ancient breakage in ebus_init()
Back when pci_dev had base_address[], loop of form
base = &...->base_address[0];
for (.....) {
...
*base++ = addr;
}
was fine, but when that array got spread in ->resource[...].start
replacing the initialization with
base = &...->resource[0].start;
was not a sufficient modification. IOW this code got broken for cases
when there had been more than one resource to fill. All way back in
2.3.41-pre3...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Fri, 22 Sep 2006 23:10:18 +0000 (00:10 +0100)]
[PATCH] fix missing ifdefs in syscall classes hookup for generic targets
several targets have no ....at() family and m32r calls its only chown variant
chown32(), with __NR_chown being undefined. creat(2) is also absent in some
targets.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeremy Fitzhardinge [Wed, 13 Sep 2006 01:55:53 +0000 (18:55 -0700)]
[CPUFREQ] sw_any_bug_dmi_table can be used on resume, so it isn't initdata
sw_any_bug_dmi_table can be used on resume, so it isn't initdata.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Dave Jones <davej@redhat.com>
Dave Jones [Fri, 22 Sep 2006 23:15:23 +0000 (19:15 -0400)]
[CPUFREQ] Fix some more CPU hotplug locking.
Lukewarm IQ detected in hotplug locking
BUG: warning at kernel/cpu.c:38/lock_cpu_hotplug()
[<
b0134a42>] lock_cpu_hotplug+0x42/0x65
[<
b02f8af1>] cpufreq_update_policy+0x25/0xad
[<
b0358756>] kprobe_flush_task+0x18/0x40
[<
b0355aab>] schedule+0x63f/0x68b
[<
b01377c2>] __link_module+0x0/0x1f
[<
b0119e7d>] __cond_resched+0x16/0x34
[<
b03560bf>] cond_resched+0x26/0x31
[<
b0355b0e>] wait_for_completion+0x17/0xb1
[<
f965c547>] cpufreq_stat_cpu_callback+0x13/0x20 [cpufreq_stats]
[<
f9670074>] cpufreq_stats_init+0x74/0x8b [cpufreq_stats]
[<
b0137872>] sys_init_module+0x91/0x174
[<
b0102c81>] sysenter_past_esp+0x56/0x79
As there are other places that call cpufreq_update_policy without
the hotplug lock, it seems better to keep the hotplug locking
at the lower level for the time being until this is revamped.
Signed-off-by: Dave Jones <davej@redhat.com>
Linus Torvalds [Fri, 22 Sep 2006 22:47:06 +0000 (15:47 -0700)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (65 commits)
IB: Fix typo in kerneldoc for ib_set_client_data()
IPoIB: Add some likely/unlikely annotations in hot path
IPoIB: Remove unused include of vmalloc.h
IPoIB: Rejoin all multicast groups after a port event
IPoIB: Create MCGs with all attributes required by RFC
IB/sa: fix ib_sa_selector names
IB/iser: INFINIBAND_ISER depends on INET
IB/mthca: Simplify calls to mthca_cq_clean()
RDMA/cma: Document rdma_accept() error handling
IB/mthca: Recover from catastrophic errors
RDMA/cma: Document rdma_destroy_id() function
IB/cm: Do not track remote QPN in timewait state
IB/sa: Require SA registration
IPoIB: Refactor completion handling
IB/iser: Do not use FMR for a single dma entry sg
IB/iser: fix some debug prints
IB/iser: make FMR "page size" be 4K and not PAGE_SIZE
IB/iser: Limit the max size of a scsi command
IB/iser: fix a check of SG alignment for RDMA
RDMA/cma: Protect against adding device during destruction
...
Linus Torvalds [Fri, 22 Sep 2006 22:37:31 +0000 (15:37 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
[netdrvr] mv643xx_eth: fix obvious typo, which caused build breakage
[netdrvr] lp486e: fix typo
Krishna Kumar [Fri, 22 Sep 2006 22:22:58 +0000 (15:22 -0700)]
IB: Fix typo in kerneldoc for ib_set_client_data()
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Eli Cohen [Fri, 22 Sep 2006 22:22:58 +0000 (15:22 -0700)]
IPoIB: Add some likely/unlikely annotations in hot path
Signed-off-by: Eli Cohen <eli@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Dotan Barak [Thu, 21 Sep 2006 15:26:43 +0000 (18:26 +0300)]
IPoIB: Remove unused include of vmalloc.h
IPoIB doesn't use anything from <linux/vmalloc.h>, so don't include it.
Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Eli Cohen [Fri, 22 Sep 2006 22:22:56 +0000 (15:22 -0700)]
IPoIB: Rejoin all multicast groups after a port event
When ipoib_ib_dev_flush() is called because of a port event, the
driver needs to rejoin all multicast groups, since the flush will call
ipoib_mcast_dev_flush() (via ipoib_ib_dev_down()). Otherwise no
(non-broadcast) multicast groups will be rejoined until the networking
core calls ->set_multicast_list again, and so multicast reception will
be broken for potentially a long time.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Fri, 22 Sep 2006 22:22:56 +0000 (15:22 -0700)]
IPoIB: Create MCGs with all attributes required by RFC
RFC 4391 ("Transmission of IP over InfiniBand (IPoIB)") says:
If the IB multicast group does not already exist, one must be
created first with the IPoIB link MTU. The MGID MUST use the same
P_Key, Q_Key, SL, MTU, and HopLimit as those used in the
broadcast-GID. The rest of attributes SHOULD follow the values used
in the broadcast-GID as well.
However, the current IPoIB driver is only setting the attributes
required by the InfiniBand spec to create a multicast group, so in
particular the MTU and HopLimit are not being set. Add these
attributes when creating MCGs, and also set the Rate attribute, since
IPoIB pays attention to that attribute as well.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Michael S. Tsirkin [Mon, 18 Sep 2006 19:17:08 +0000 (22:17 +0300)]
IB/sa: fix ib_sa_selector names
Relevant SA queries are actually "greater than" / "less than", not
"greater than or equal" / "less than or equal" as the names imply.
(See IB spec 1.2 Vol 1, 15.2.5.16 PATHRECORD/Table 205 PathRecord)
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Fri, 22 Sep 2006 22:22:55 +0000 (15:22 -0700)]
IB/iser: INFINIBAND_ISER depends on INET
iSER won't build without CONFIG_INET enabled, so make Kconfig reflect that.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Fri, 22 Sep 2006 22:22:55 +0000 (15:22 -0700)]
IB/mthca: Simplify calls to mthca_cq_clean()
If a QP has separate send and receive CQs, then the send CQ will never
have receive completions from that QP in it. So when cleaning the
send CQ, there's no need to pass in an SRQ pointer, even if the QP is
attached to an SRQ.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Or Gerlitz [Fri, 22 Sep 2006 22:22:54 +0000 (15:22 -0700)]
RDMA/cma: Document rdma_accept() error handling
Document the reject sending and modifying QP to error done in rdma_accept().
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Jack Morgenstein [Tue, 15 Aug 2006 18:11:18 +0000 (21:11 +0300)]
IB/mthca: Recover from catastrophic errors
Trigger device remove and then add when a catastrophic error is
detected in hardware. This, in turn, will cause a device reset, which
we hope will recover from the catastrophic condition.
Since this might interefere with debugging the root cause, add a
module option to suppress this behaviour.
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Or Gerlitz [Tue, 12 Sep 2006 16:03:33 +0000 (09:03 -0700)]
RDMA/cma: Document rdma_destroy_id() function
Clarify that rdma_destroy_id cancels outstanding asynchronous operations on the
Associated id.
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Michael S. Tsirkin [Mon, 28 Aug 2006 13:32:50 +0000 (16:32 +0300)]
IB/cm: Do not track remote QPN in timewait state
Do not track remote QPN in TimeWait state, since QP is not connected.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Michael S. Tsirkin [Mon, 21 Aug 2006 23:40:12 +0000 (16:40 -0700)]
IB/sa: Require SA registration
Require users to register with SA module, to prevent the sa_query
module text from going away while an SA query callback is still
running. Update all in-tree users for the new interface.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Fri, 22 Sep 2006 22:22:52 +0000 (15:22 -0700)]
IPoIB: Refactor completion handling
Split up ipoib_ib_handle_wc() into ipoib_ib_handle_rx_wc() and
ipoib_ib_handle_tx_wc() to make the code easier to read. This will
also help implement NAPI in the future.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Erez Zilber [Mon, 11 Sep 2006 09:26:33 +0000 (12:26 +0300)]
IB/iser: Do not use FMR for a single dma entry sg
Fast Memory Registration (fmr) is used to register for rdma an sg whose
elements are not linearly sequential after dma mapping.
The IB verbs layer provides an "all dma memory MR (memory region)" which
can be used for RDMA-ing a dma linearly sequential buffer.
Change the code to use the dma mr instead of doing fmr when dma mapping
produces a single dma entry sg.
Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Erez Zilber [Mon, 11 Sep 2006 09:24:00 +0000 (12:24 +0300)]
IB/iser: fix some debug prints
fix and add some debug prints related to iser
handling of memory for rdma.
Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Erez Zilber [Mon, 11 Sep 2006 09:22:30 +0000 (12:22 +0300)]
IB/iser: make FMR "page size" be 4K and not PAGE_SIZE
As iser is able to use at most one rdma operation for the
execution of a scsi command, and registration of the sg
associated with scsi command has its restrictions, the code
checks if an sg is "aligned for rdma".
Alignment for rdma is measured in "fmr page" units whose
possible resolutions are different between HCAs and can be
smaller, equal or bigger to the system page size.
When the system page size is bigger than 4KB (eg the default
with ia64 kernels) there a bigger chance that an sg would be
aligned for rdma if the fmr page size is 4KB.
Change the code to create FMR whose pages are of size 4KB
and to take that into account when processing the sg.
Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Erez Zilber [Mon, 11 Sep 2006 09:20:54 +0000 (12:20 +0300)]
IB/iser: Limit the max size of a scsi command
Currently, the data length of a command coming down from scsi-ml
is limited only by the size of its sg list (sg_tablesize). The
max data length may be different for different page size values.
By setting max_sectors, we limit the data length to
max_sectors*512 bytes.
Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Erez Zilber [Mon, 11 Sep 2006 09:19:17 +0000 (12:19 +0300)]
IB/iser: fix a check of SG alignment for RDMA
dma mapping may include a "compaction" of the sg associated with scsi command.
Hence, the size of the maximal prefix of the SG which is aligned for rdma must be
compared against the length of the dma mapped sg (mem->dma_nents) and not against
the size of it before it was mapped (mem->size).
Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Sean Hefty [Fri, 1 Sep 2006 22:33:55 +0000 (15:33 -0700)]
RDMA/cma: Protect against adding device during destruction
Closes a window where address resolution can attach an rdma_cm_id to a
device during destruction of the rdma_cm_id. This can result in the
rdma_cm_id remaining in the device list after its memory has been
freed.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Tom Tucker [Fri, 22 Sep 2006 22:22:48 +0000 (15:22 -0700)]
RDMA/amso1100: Add driver for Ammasso 1100 RNIC
Add a driver for the Ammasso 1100 gigabit ethernet RNIC.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Tom Tucker [Thu, 3 Aug 2006 21:02:42 +0000 (16:02 -0500)]
RDMA: iWARP Core Changes.
Modifications to the existing rdma header files, core files, drivers,
and ulp files to support iWARP, including:
- Hook iWARP CM into the build system and use it in rdma_cm.
- Convert enum ib_node_type to enum rdma_node_type, which includes
the possibility of RDMA_NODE_RNIC, and update everything for this.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Tom Tucker [Thu, 3 Aug 2006 21:02:40 +0000 (16:02 -0500)]
RDMA: iWARP Connection Manager.
Add an iWARP Connection Manager (CM), which abstracts connection
management for iWARP devices (RNICs). It is a logical instance of the
xx_cm where xx is the transport type (ib or iw). The symbols exported
are used by the transport independent rdma_cm module, and are
available also for transport dependent ULPs.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Fri, 22 Sep 2006 22:22:46 +0000 (15:22 -0700)]
IB: Whitespace fixes
Remove some trailing whitespace that has snuck in despite the best
efforts of whitespace=error-all. Also fix a few other whitespace
bogosities.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Sean Hefty [Mon, 28 Aug 2006 22:15:18 +0000 (15:15 -0700)]
IB/cm: Randomize starting comm ID
Randomize the starting local comm ID to avoid getting a rejected
connection due to a stale connection after a system reboot or
reloading of the ib_cm.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
James Lentini [Mon, 28 Aug 2006 22:12:04 +0000 (15:12 -0700)]
IB/mad: Remove unused includes
The ib_mad module does not use a kthread function, but mad_priv.h
includes <linux/kthread.h>. mad_rmpp.c does not do any DMA-related
stuff, but includes <linux/dma-mapping.h>. Remove the unused includes.
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Sean Hefty [Mon, 28 Aug 2006 22:10:32 +0000 (15:10 -0700)]
IB/mad: Add support for dual-sided RMPP transfers.
The implementation assumes that any RMPP request that requires a
response uses DS RMPP. Based on the RMPP start-up scenarios defined
by the spec, this should be a valid assumption. That is, there is no
start-up scenario defined where an RMPP request is followed by a
non-RMPP response. By having this assumption we avoid any API
changes.
In order for a node that supports DS RMPP to communicate with one that
does not, RMPP responses assume a new window size of 1 if a DS ACK has
not been received. (By DS ACK, I'm referring to the turn-around ACK
after the final ACK of the request.) This is a slight spec deviation,
but is necessary to allow communication with nodes that do not
generate the DS ACK. It also handles the case when a response is sent
after the request state has been discarded.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Sean Hefty [Mon, 28 Aug 2006 18:57:42 +0000 (11:57 -0700)]
IB/cm: Use correct reject code for invalid GID
Set the reject code properly when rejecting a request that contains an
invalid GID. A suitable GID is returned by the IB CM in the
additional reject information (ARI). This is a spec compliancy issue.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Sean Hefty [Mon, 28 Aug 2006 18:55:52 +0000 (11:55 -0700)]
IB/cm: Enable atomics along with RDMA reads
Enable atomic operations along with RDMA reads if a local RDMA
read/atomic depth is provided by the user.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Jack Morgenstein [Mon, 28 Aug 2006 16:12:39 +0000 (19:12 +0300)]
IB/mthca: Return correct number of bits for static rate in query_qp
Incorrect number of bits was taken for static_rate field.
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Jack Morgenstein [Mon, 28 Aug 2006 16:10:34 +0000 (19:10 +0300)]
IB/mthca: Return port number for unconnected QPs in query_qp
port_num was not being returned for unconnected QPs.
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Jack Morgenstein [Mon, 28 Aug 2006 16:08:53 +0000 (19:08 +0300)]
IB/mthca: Fix default static rate returned for Tavor in AV
When default static rate is returned for Tavor, need to translate it
to an ib rate value.
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:48 +0000 (11:24 -0700)]
IB/ipath: control receive polarity inversion
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:46 +0000 (11:24 -0700)]
IB/ipath: fix return value from ipath_poll
This stops the generic poll code from waiting for a timeout.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:45 +0000 (11:24 -0700)]
IB/ipath: allow SMA to be disabled
This is useful for testing purposes.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:44 +0000 (11:24 -0700)]
IB/ipath: handle sq_sig_all field correctly
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:43 +0000 (11:24 -0700)]
IB/ipath: put a limit on the number of QPs that can be created
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:42 +0000 (11:24 -0700)]
IB/ipath: validate path_mig_state properly
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:41 +0000 (11:24 -0700)]
IB/ipath: be more strict about testing the modify QP verb
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:40 +0000 (11:24 -0700)]
IB/ipath: add serial number to hardware freeze error message
Also added the word "Hardware" after "Fatal" to make it more obvious
that it's hardware, not software.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:39 +0000 (11:24 -0700)]
IB/ipath: support new QLogic product naming scheme
This patch only renames files, fixes product names, and updates
comments.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:38 +0000 (11:24 -0700)]
IB/ipath: account for attached QPs correctly
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:37 +0000 (11:24 -0700)]
IB/ipath: do not allow use of CQ entries with invalid counts
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:36 +0000 (11:24 -0700)]
IB/ipath: add new minor device to allow sending of diag packets
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:35 +0000 (11:24 -0700)]
IB/ipath: trivial cleanups
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:34 +0000 (11:24 -0700)]
IB/ipath: remove stale references to userspace SMA
When we first submitted a userspace subnet management agent, it was
rejected, so we left it out of the final driver submission. This patch
removes a number of vestigial references to it.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:33 +0000 (11:24 -0700)]
IB/ipath: simplify debugging code after ipath_core and ib_ipath merger
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:32 +0000 (11:24 -0700)]
IB/ipath: simplify layering code
A lot of ipath layer code was only called in one place. Now that the
ipath_core and ib_ipath drivers are merged, it's more sensible to simply
inline the simple stuff that the layer code was doing.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:31 +0000 (11:24 -0700)]
IB/ipath: merge ipath_core and ib_ipath drivers
There is little point in keeping the two drivers separate, so we are
merging them.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:30 +0000 (11:24 -0700)]
IB/ipath: drop requirement that PIO buffers be mmaped write-only
Some userlands try to mmap these pages read-write, so accommodate them.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:29 +0000 (11:24 -0700)]
IB/ipath: fix handling of kpiobufs
Change comment: no longer imply that user can set ipath_kpiobufs to zero.
Actually set ipath_kpiobufs from parameter. Previously only altered
per-device ipath_lastport_piobuf, which was over-written in chip init.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:28 +0000 (11:24 -0700)]
IB/ipath: fix for crash on module unload, if cfgports < portcnt
Allocate enough pointers for all possible ports, to avoid problems in
cleanup/unload.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:27 +0000 (11:24 -0700)]
IB/ipath: lock resource limit counters correctly
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:26 +0000 (11:24 -0700)]
IB/ipath: More changes to support InfiniPath on PowerPC 970 systems
Ordering of writethrough store buffers needs to be forced, and we need
to use ifdef to get writethrough behavior to InfiniPath buffers, because
there is no generic way to specify that at this time (similar to code
in char/drm/drm_vm.c and block/z2ram.c).
Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Ralph Campbell [Fri, 22 Sep 2006 22:22:26 +0000 (15:22 -0700)]
IB/ipath: Performance improvements via mmap of queues
Improve performance of userspace post receive, post SRQ receive, and
poll CQ operations for ipath by allowing userspace to directly mmap()
receive queues and completion queues. This eliminates the copying
between userspace and the kernel in the data path.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Ralph Campbell [Fri, 11 Aug 2006 21:58:09 +0000 (14:58 -0700)]
IB/uverbs: Pass userspace data to modify_srq and modify_qp methods
Pass a struct ib_udata to the low-level driver's ->modify_srq() and
->modify_qp() methods, so that it can get to the device-specific data
passed in by the userspace driver.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Ralph Campbell [Fri, 22 Sep 2006 22:22:24 +0000 (15:22 -0700)]
IB/uverbs: Allow resize CQ operation to return driver-specific data
Add a ib_uverbs_resize_cq_resp.driver_data field so that low-level
drivers can return data from a resize CQ operation to userspace. Have
ib_uverbs_resize_cq() only copy the cqe field, to avoid having to bump
the userspace ABI.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Heiko J Schick [Fri, 22 Sep 2006 22:22:22 +0000 (15:22 -0700)]
IB/ehca: Add driver for IBM eHCA InfiniBand adapters
Add a driver for IBM GX bus InfiniBand adapters, which are usable with
some pSeries/System p systems.
Signed-off-by: Heiko J Schick <schickhj.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Ishai Rabinovitz [Tue, 15 Aug 2006 14:34:52 +0000 (17:34 +0300)]
IB/srp: Add port/device attributes
Add local_ib_device and local_ib_port attributes to srp scsi_host.
These are needed when we want to connect to the same target through
multiple distinct ports.
Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
James Lentini [Fri, 22 Sep 2006 22:17:20 +0000 (15:17 -0700)]
IB/mthca: Include the header we really want
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Fri, 22 Sep 2006 22:17:20 +0000 (15:17 -0700)]
IB/uverbs: Fix lockdep warning when QP is created with 2 CQs
Lockdep warns when userspace creates a QP that uses different CQs for
send completions and receive completions, because both CQs are locked
and their mutexes belong to the same lock class. However, we know
that the mutexes are distinct and the nesting is safe (there is no
possibility of AB-BA deadlock because the mutexes are locked with
down_read()), so annotate the situation with SINGLE_DEPTH_NESTING to
get rid of the lockdep warning.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Fri, 22 Sep 2006 22:17:19 +0000 (15:17 -0700)]
IB/uverbs: Use idr_read_cq() where appropriate
There were two functions that open-coded idr_read_cq() in terms of
idr_read_uobj() rather than using the helper.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Michael S. Tsirkin [Thu, 3 Aug 2006 19:16:06 +0000 (22:16 +0300)]
IB/ipoib: Fix flush/start xmit race (from code review)
Prevent flush task from freeing the ipoib_neigh pointer, while
ipoib_start_xmit() is accessing the ipoib_neigh through the pointer it
has loaded from the skb's hardware address.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Michael S. Tsirkin [Fri, 22 Sep 2006 22:17:18 +0000 (15:17 -0700)]
IB/mthca: Don't use privileged UAR for kernel access
Make kernel use UAR2 instead of UAR1 for hardware access: this adds
sanity checking from the hardware side, without any performance cost.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Jack Morgenstein [Tue, 19 Sep 2006 08:13:24 +0000 (11:13 +0300)]
IB/mthca: Fix lid used for sending traps
The SM LID used to send traps to is incorrectly set to port LID. This
is a regression from 2.6.17 -- after a PortInfo MAD is received, no
traps are sent to the SM LID. The traps go to the loopback interface
instead, and are dropped there. The SM LID should be taken from the
sm_lid of the PortInfo response.
The bug was introduced by commit
12bbb2b7be7f5564952ebe0196623e97464b8ac5:
IB/mthca: Add client reregister event generation
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Linus Torvalds [Fri, 22 Sep 2006 19:56:22 +0000 (12:56 -0700)]
Merge git://git.infradead.org/~dwmw2/hdroneline
* git://git.infradead.org/~dwmw2/hdroneline:
[HEADERS] One line per header in Kbuild files to reduce conflicts
Manual (trivial) conflict resolution in include/asm-s390/Kbuild
Linus Torvalds [Fri, 22 Sep 2006 19:52:16 +0000 (12:52 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
ocfs2: Remove overzealous BUG_ON()
ocfs2: Don't print on unknown remote blocking call
ocfs2: Remove EXPERIMENTAL dependency
ocfs2: implement directory read-ahead
ocfs2: properly update i_mtime on buffered write
ocfs2: Fix directory link count checks in ocfs2_link()
ocfs2: move nlink check in ocfs2_mknod()
ocfs2: Fix heartbeat sector calculation
[PATCH] fs/ocfs2/ioctl.c should #include "ioctl.h"
ocfs2: add ext2 attributes
configfs: Prevent duplicate subsystem names.
Linus Torvalds [Fri, 22 Sep 2006 19:51:33 +0000 (12:51 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (64 commits)
[BLOCK] dm-crypt: trivial comment improvements
[CRYPTO] api: Deprecate crypto_digest_* and crypto_alg_available
[CRYPTO] padlock: Convert padlock-sha to use crypto_hash
[CRYPTO] users: Use crypto_comp and crypto_has_*
[CRYPTO] api: Add crypto_comp and crypto_has_*
[CRYPTO] users: Use crypto_hash interface instead of crypto_digest
[SCSI] iscsi: Use crypto_hash interface instead of crypto_digest
[CRYPTO] digest: Remove old HMAC implementation
[CRYPTO] doc: Update documentation for hash and me
[SCTP]: Use HMAC template and hash interface
[IPSEC]: Use HMAC template and hash interface
[CRYPTO] tcrypt: Use HMAC template and hash interface
[CRYPTO] hmac: Add crypto template implementation
[CRYPTO] digest: Added user API for new hash type
[CRYPTO] api: Mark parts of cipher interface as deprecated
[PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument
[CRYPTO] drivers: Remove obsolete block cipher operations
[CRYPTO] users: Use block ciphers where applicable
[SUNRPC] GSS: Use block ciphers where applicable
[IPSEC] ESP: Use block ciphers where applicable
...
Linus Torvalds [Fri, 22 Sep 2006 19:50:35 +0000 (12:50 -0700)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits)
[S390] hypfs crashes with invalid mount option.
[S390] cio: subchannel evaluation function operates without lock
[S390] cio: always query all paths on path verification.
[S390] cio: update path groups on logical CHPID changes.
[S390] cio: subchannels in no-path state.
[S390] Replace nopav-message on VM.
[S390] set modalias for ccw bus uevents.
[S390] Get rid of DBG macro.
[S390] Use alternative user-copy operations for new hardware.
[S390] Make user-copy operations run-time configurable.
[S390] Cleanup in signal handling code.
[S390] Cleanup in page table related code.
[S390] Linux API for writing z/VM APPLDATA Monitor records.
[S390] xpram off by one error.
[S390] Remove kexec experimental flag.
[S390] cleanup appldata.
[S390] fix typo in vmcp.
[S390] Kernel stack overflow handling.
[S390] qdio slsb processing state.
[S390] Missing initialization in common i/o layer.
...
Linus Torvalds [Fri, 22 Sep 2006 19:49:18 +0000 (12:49 -0700)]
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
Remove accidentally-added include/linux/utsrelease.h
Revert "[MTD] blkdev helper code: fix printk format warning"
[MTD] Add SSFDC (SmartMedia) read-only translation layer
[MTD] pmc551 pci cleanup
[MTD] pmc551 use kzalloc
[MTD] pmc551 whitespace cleanup
[MTD] Remove iq80310 map driver
[MTD NAND] Fix in typo ndfc.c causing wrong ECC layout
[MTD] physmap: add power management support
ioremap balanced with iounmap for drivers/mtd subsystem
[MTD] Switch to pci_get_device and do ref counting
[MTD] blkdev helper code: fix printk format warning
[MTD] Fix ixp4xx partition parsing.
[JFFS2] Remove unneeded ifdefs from jffs2_fs_i.h
[MTD NAND] Remove old code in au1550nd.c
[MTD] Unlock NOR flash automatically where necessary
Linus Torvalds [Fri, 22 Sep 2006 19:48:03 +0000 (12:48 -0700)]
Merge git://git./linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (114 commits)
[POWERPC] Fix ohare IDE irq workaround on old powermacs
[POWERPC] EEH: Power4 systems sometimes need multiple resets.
[POWERPC] Include <asm/mmu.h> in arch/powerpc/sysdev/fsl_soc.h for phys_addr_t.
[POWERPC] Demacrofy arch/powerpc/platforms/maple/pci.c
[POWERPC] Maple U3 HT - reject inappropriate config space access
[POWERPC] Fix IPIC pending register assignments
[POWERPC] powerpc: fix building gdb against asm/ptrace.h
[POWERPC] Remove DISCONTIGMEM cruft from page.h
[POWERPC] Merge iSeries i/o operations with the rest
[POWERPC] 40x: Fix debug status register defines
[POWERPC] Fix compile error in sbc8560
[POWERPC] EEH: support MMIO enable recovery step
[POWERPC] EEH: enable MMIO/DMA on frozen slot
[POWERPC] EEH: code comment cleanup
[POWERPC] EEH: balance pcidev_get/put calls
[POWERPC] PPC: Fix xmon stack frame address in backtrace
[POWERPC] Add AT_PLATFORM value for Xilinx Virtex-4 FX
[POWERPC] Start arch/powerpc/boot code reorganization
[POWERPC] Define of_read_ulong helper
[POWERPC] iseries: eliminate a couple of warnings
...
David Woodhouse [Fri, 22 Sep 2006 17:41:20 +0000 (18:41 +0100)]
Remove accidentally-added include/linux/utsrelease.h
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
David Woodhouse [Fri, 22 Sep 2006 10:05:42 +0000 (11:05 +0100)]
Revert "[MTD] blkdev helper code: fix printk format warning"
This reverts commit
668040fcd1e06fc3e68a92708cbdfa5a52c37d3c.
The 'flags' field of the struct request is 'unsigned long'. Quite
how Randy came to see 'long int format, different type arg' I don't
know, but it doesn't seem to be the case any more.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Claudio Lanconelli [Fri, 22 Sep 2006 10:01:37 +0000 (11:01 +0100)]
[MTD] Add SSFDC (SmartMedia) read-only translation layer
Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This page took 0.044737 seconds and 5 git commands to generate.