Xiao Guangrong [Tue, 26 Jun 2012 08:51:55 +0000 (16:51 +0800)]
staging: zcache: cleanup zcache_do_preload and zcache_put_page
Cleanup the code for zcache_do_preload and zcache_put_page
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiao Guangrong [Tue, 26 Jun 2012 08:51:34 +0000 (16:51 +0800)]
staging: zcache: optimize zcache_do_preload
zcache_do_preload is called in zcache_put_page where IRQ is disabled, so, need
not care preempt
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiao Guangrong [Tue, 26 Jun 2012 08:51:10 +0000 (16:51 +0800)]
staging: zcache: cleanup zbud_init
Need not set global parameters to 0
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiao Guangrong [Tue, 26 Jun 2012 08:50:50 +0000 (16:50 +0800)]
staging: zcache: mark zbud_init/zcache_comp_init as __init
These functions are called only when system is initializing, so mark __init
for them to free memory
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiao Guangrong [Tue, 26 Jun 2012 08:50:31 +0000 (16:50 +0800)]
staging: zcache: remove unnecessary config option dependence
zcache is enabled only if one of CONFIG_CLEANCACHE and CONFIG_FRONTSWAP is
enabled, see the Kconfig:
depends on (CLEANCACHE || FRONTSWAP) && CRYPTO=y && X86
So, we can remove the check in the source code
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiao Guangrong [Tue, 26 Jun 2012 08:50:10 +0000 (16:50 +0800)]
staging: zcache: fix a compile warning
Fix:
drivers/staging/zcache/zcache-main.c: In function ‘zcache_comp_op’:
drivers/staging/zcache/zcache-main.c:112:2: warning: ‘ret’ may be used uninitial
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiao Guangrong [Tue, 26 Jun 2012 08:49:46 +0000 (16:49 +0800)]
staging: zcache: fix refcount leak
In zcache_get_pool_by_id, the refcount of zcache_host is not increased, but
it is always decreased in zcache_put_pool
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emil Goode [Sat, 7 Jul 2012 18:44:49 +0000 (20:44 +0200)]
staging: CSR: fix function declaration warnings
Sparse is warning about non-ANSI function declaration.
Add void to the parameterless function.
drivers/staging/csr/csr_wifi_hip_chiphelper.c:633:31: warning:
non-ANSI function declaration of function 'ChipHelper_Null'
I also fixed this checkpatch error:
ERROR: "foo* bar" should be "foo *bar"
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Fri, 6 Jul 2012 15:39:47 +0000 (18:39 +0300)]
staging: ccg: print MAC addresses via %pM
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Fri, 6 Jul 2012 15:28:15 +0000 (18:28 +0300)]
staging: gdm72xx: use %pM for MAC
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Fri, 6 Jul 2012 15:28:16 +0000 (18:28 +0300)]
staging: vt6655: use %pM for BSSID
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Cc: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Fri, 6 Jul 2012 15:28:17 +0000 (18:28 +0300)]
staging: vt6656: use %pM for the BSSID
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Fri, 6 Jul 2012 15:28:14 +0000 (18:28 +0300)]
staging: csr: print MAC addresses via %pM
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Fri, 6 Jul 2012 15:28:13 +0000 (18:28 +0300)]
staging: bcm: use %pM to print MAC addresses
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 6 Jul 2012 08:21:49 +0000 (11:21 +0300)]
Staging: vme: silence a Sparse warning
Sparse complains that "arg" is not a __user pointer. The "argp" and
"arg" variables are equivalent but argp is declared as a __user pointer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Murray [Fri, 6 Jul 2012 14:20:43 +0000 (09:20 -0500)]
Drivers: Staging: ccg: Made checkpatch.pl clean
Fixed a tiny checkpatch.pl warning.
Signed-off-by: David Murray <therealcykey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Iglesias Gonsálvez [Wed, 4 Jul 2012 14:11:10 +0000 (16:11 +0200)]
Staging: ipack/devices/ipoctal: save IRQ vector in MEM space
The IRQ vector should be saved in MEM space base address according to the
datasheet.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcos Paulo de Souza [Tue, 3 Jul 2012 02:59:30 +0000 (23:59 -0300)]
staging: vt6656: main_usb.c: Remove useless macros
All these macros are not used. So, remove this all.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Justin P. Mattock [Mon, 2 Jul 2012 14:44:41 +0000 (07:44 -0700)]
staging "telephony" Fix typos.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Sun, 1 Jul 2012 18:01:35 +0000 (23:31 +0530)]
staging/ft1000: fix minor coding style problem
this following warn is fixed up
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1754:
ERROR: open brace '{' following function declarations go on the next line
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Ramirez Luna [Fri, 29 Jun 2012 18:49:20 +0000 (13:49 -0500)]
staging: tidspbridge: dynamically allocate my_sym_buf in dload_symbols
Dynamically allocate my_sym_buf to silence the following warning:
drivers/staging/tidspbridge/dynload/cload.c:
In function 'dload_symbols':
drivers/staging/tidspbridge/dynload/cload.c:890:
warning: the frame size of 1040 bytes is larger than 1024 bytes
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Ramirez Luna [Fri, 29 Jun 2012 18:49:19 +0000 (13:49 -0500)]
staging: tidspbridge: dynamically allocate ibuf in dload_data
Dynamically allocate ibuf to silence the following warning:
drivers/staging/tidspbridge/dynload/cload.c:
In function 'dload_data':
drivers/staging/tidspbridge/dynload/cload.c:1337:
warning: the frame size of 1216 bytes is larger than 1024 bytes
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Ramirez Luna [Fri, 29 Jun 2012 18:49:18 +0000 (13:49 -0500)]
staging: tidspbridge: split bridge_io_on_loaded
Due to its size, this function declares too many variables,
to split it a new structure has been declared to hold values
as they are read from the baseimage.
While at it, indentation was reduced by renaming variables
and reducing blocks of code with the following structure:
if (success) {
...
if (success)
...
}
This fixes the following warning:
drivers/staging/tidspbridge/core/io_sm.c:
In function 'bridge_io_on_loaded':
drivers/staging/tidspbridge/core/io_sm.c:777:
warning: the frame size of 1032 bytes is larger
than 1024 bytes
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Ramirez Luna [Fri, 29 Jun 2012 18:49:17 +0000 (13:49 -0500)]
staging: tidspbridge: add pud code
And fix the following warning for passing an incorrect
variable type.
../tiomap3430.c: In function 'user_va2_pa':
../tiomap3430.c:1555:
warning: passing argument 1 of 'pmd_offset' from
incompatible pointer type
arch/arm/include/asm/pgtable-2level.h:156:
note: expected 'struct pud_t *' but argument is of
type 'pmdval_t (*)[2]'
While at it, eliminate 'if' nesting to increase readability.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcos Paulo de Souza [Fri, 29 Jun 2012 04:19:23 +0000 (01:19 -0300)]
staging: sep: sep_crypto.c: Remove useless functions sep_dump and sep_dump_sg
These two functions only has commented code, so remove it.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcos Paulo de Souza [Fri, 29 Jun 2012 04:19:22 +0000 (01:19 -0300)]
staging: sep: sep_crypto.c: Remove useless function crypto_sep_dump_message
The function crypto_sep_dump_message don't have any use in this driver. So remove it.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Wed, 27 Jun 2012 19:26:03 +0000 (21:26 +0200)]
staging: line6: Changed strict_strtoul() to kstrtou8() in pod_set_midi_postprocess()
Changed a call to strict_strtoul() into kstrtou8() in
pod_set_midi_postprocess().
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Wed, 27 Jun 2012 19:26:02 +0000 (21:26 +0200)]
staging: line6: Changed strict_strtoul() to kstrtou8() in pod_set_channel()
Changed strict_strtoul() to kstrtou() in pod_set_channel() to take changes in
pod_send_channel() into account.
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Wed, 27 Jun 2012 19:26:01 +0000 (21:26 +0200)]
staging: line6: Exchanged strict_strtoul with kstrtou8() in pod.c:pod_resolve()
Exchanged call to strict_strtoul() with kstrtou8() in pod_resolve().
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Wed, 27 Jun 2012 19:26:00 +0000 (21:26 +0200)]
staging: line6: control.c eliminate strict_strtoul() in pod_set_param_int()
Exchange strict_strtoul() with kstrtou8() and make "value" a u8 instead of a
unsigned long. This is also needed for the changed
line6_pod_transmit_parameter().
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Wed, 27 Jun 2012 19:25:59 +0000 (21:25 +0200)]
staging: line6: changed interface of pod_send_channel()
Adjusted interface of pod_send_channel() in order to take changes of
line6_send_program() into account.
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Wed, 27 Jun 2012 19:25:58 +0000 (21:25 +0200)]
staging: line6: adjusted interface of line6_send_program()
Adjusted interface of line6_send_program() to clarify internal working
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Wed, 27 Jun 2012 19:25:57 +0000 (21:25 +0200)]
staging: line6: changed interface of line6_pod_transmit_parameter()
Adjusted interface of line6_pod_transmit_parameter() to take changes of
line6_transmit_parameter() into account
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Wed, 27 Jun 2012 19:25:56 +0000 (21:25 +0200)]
staging: line6: Changed some strict_strtouls to kstrtou8
Adjusted strict_strtoul calls to kstrtou8 in order to take the changes of
line6_transmit_parameter() into account.
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Wed, 27 Jun 2012 19:25:55 +0000 (21:25 +0200)]
staging: line6: changed interface of line6_transmit_parameter()
Interface of line6_transmit_parameter() adjusted to clarify internal workings
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rob Clark [Wed, 27 Jun 2012 20:11:38 +0000 (15:11 -0500)]
staging: drm/omap: update TODO
Update TODO file, which had been neglected.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Wed, 27 Jun 2012 20:03:30 +0000 (22:03 +0200)]
staging: vt6656: int.c: correct indentation to use tabs rather than spaces
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Wed, 27 Jun 2012 20:02:48 +0000 (22:02 +0200)]
staging: vt6656: int.c: We don't use spaces between a cast and the variable being converted
Remove spaces between casts and variables from
drivers/staging/vt6656/int.c .
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Wed, 27 Jun 2012 20:02:19 +0000 (22:02 +0200)]
staging: vt6656: int.c: Use one space between variable type and name
The style of most kernel code is that there is 1 *space* between the
type of a variable and its name. This patch enforces that in
drivers/staging/vt6656/int.c .
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Wed, 27 Jun 2012 20:01:47 +0000 (22:01 +0200)]
staging: vt6656: int.c: Remove unneeded cast
When assigning a void* to a variable <of some other type>, the value
is cast implicitly - there's no need for explicit cast.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Wed, 27 Jun 2012 20:01:18 +0000 (22:01 +0200)]
staging: vt6656: int.c: Put comment about DEBUG print define on same line as code
A small comment at the end of the line, mentioning the debug level, is
enough - no need to repeat the entire line of code just for that.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Wed, 27 Jun 2012 20:00:41 +0000 (22:00 +0200)]
staging: vt6656: int.h: Fix indentation and spacing
We use tabs for indentation and once space between variable types and
variable name.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Wed, 27 Jun 2012 20:00:14 +0000 (22:00 +0200)]
staging: vt6656: int: Redundant blank line removal
This trivial cleanup patch removes some completely redundant blank
lines from drivers/staging/vt6656/int.[ch]
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier M. Mellid [Wed, 27 Jun 2012 12:10:15 +0000 (14:10 +0200)]
staging: sm7xxfb: erase hardcode cast between smtcfb_info and fb_info
This patch erases hardcode cast between smtcfb_info and fb_info in order
to get a more robust and less rigid smtcfb_info structure. fb_info
doesn't need to be the first field in smtcfb_info after this patch.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier M. Mellid [Wed, 27 Jun 2012 12:10:14 +0000 (14:10 +0200)]
staging: sm7xxfb: rename vars holding device and revision ids
This patch fixes CamelCase var names in smtcfb_info holding device and
revision identifiers.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Wed, 27 Jun 2012 20:28:55 +0000 (22:28 +0200)]
Staging: echo: One variable per line
Our convention is one (statement and) variable per line. Enforce
this in drivers/staging/echo/echo.[ch] .
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 6 Jul 2012 23:03:44 +0000 (16:03 -0700)]
Merge branch 'togreg' of git://git./linux/kernel/git/jic23/iio into staging-next
Greg Kroah-Hartman [Fri, 6 Jul 2012 23:01:20 +0000 (16:01 -0700)]
Merge branch 'fixes-togreg' of git://git./linux/kernel/git/jic23/iio into staging-next
H Hartley Sweeten [Mon, 2 Jul 2012 21:26:24 +0000 (14:26 -0700)]
staging: comedi: s626: fix the number of dio channels
The first digital i/o subdevice has its n_chan set to S626_DIO_CHANNELS
which is defined as 48. This is actually the total number of channels
provided by all three digital i/o subdevices. Each subdevice only has
16 channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Jul 2012 01:15:02 +0000 (18:15 -0700)]
staging: comedi: dmm32at: remove skel driver cut-and-paste comments
Remove the cut-and-paste comments from the skel driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Jul 2012 01:14:27 +0000 (18:14 -0700)]
staging: comedi: dmm32at: remove devpriv macro
The 'devpriv' macro relies on a local variable having a specific
name and yields a pointer derived from that local variable. Replace
the macro with a local variable where used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Jul 2012 01:13:53 +0000 (18:13 -0700)]
staging: comedi: dmm32at: remove unneeded boardinfo variables
Like most of the comedi drivers, this one appears to have been started
based on the skel driver. Cut-and-paste from that driver has resulted
in an unnecessarily complex boardinfo struct.
Remove everything from the boardinfo struct, except the 'name', and
just use the open coded values in the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Jul 2012 01:13:11 +0000 (18:13 -0700)]
staging: comedi: dmm32at: remove dmm_outb macro
The macro is just a wrapper for outb(). Just use the outb() directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Jul 2012 01:12:35 +0000 (18:12 -0700)]
staging: comedi: dmm32at: remove dmm_inb macro
The macro is just a wrapper for inb(). Just use the inb() directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Jul 2012 01:11:56 +0000 (18:11 -0700)]
staging: comedi: dmm32at: remove forward declarations 2
Move the dmm32at_ns_to_timer() and dmm32at_setaitimer() functions
to remove the need for the remaining forward declarations.
Also, make dmm32at_setaitimer() static, it's only referenced in
this file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Jul 2012 01:11:23 +0000 (18:11 -0700)]
staging: comedi: dmm32at: remove forward declarations 1
Move the attach/detach functions as well as the boardinfo variable
to remove the need to most of the forward declarations.
Add some whitespace to the boardinfo during the move.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 3 Jul 2012 01:10:46 +0000 (18:10 -0700)]
staging: comedi: dmm32at: use module_comedi_driver
Convert driver to use the module_comedi_driver() macro to remove
some of the boilerplate.
Move the comedi_driver variable to the end of the file to keep it
with the module_comedi_driver() macro. This also removes the need
for some of the forward declarations. While moving the variable:
1) strip out the unnecessary cut-and-paste skel driver comments
2) add whitespace to improve the readability
3) rename the variable from driver* to *driver
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:48:58 +0000 (15:48 -0700)]
staging: comedi: das08_cs: remove thisboard macro
The 'thisboard' macro relies on a local variable having a specific
name and yields a pointer derived from that local variable. Replace
the macro with a local variable where used. Use the comedi_board()
helper to get the pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:48:26 +0000 (15:48 -0700)]
staging: comedi: das08_cs: move the comedi_driver variable
Move the comedi_driver variable to remove the need for the
forward declarations. Add some whitespace to the declaration
for aesthetic reasons.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:47:47 +0000 (15:47 -0700)]
staging: comedi: das08_cs: refactor the pcmcia probe/remove
Move the pcmcia_disable_device() call where needed in the pcmcia
probe/remove and delete the das08_pcmcia_release() function.
Move the logic of the das08_pcmcia_config() directly into the
probe function and properly return an error code when the config
fails.
Only set cur_dev, used by the comedi_driver, if the pcmcia probe
is successful. Also, make sure to NULL it in the remove.
Remove all the kernel messages in the pcmcia support code. They
are just added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:47:14 +0000 (15:47 -0700)]
staging: comedi: das08_cs: remove unneeded pcmcia private data
The pcmcia device-specific data is no longer needed by this driver.
Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:46:40 +0000 (15:46 -0700)]
staging: comedi: das08_cs: remove the pcmcia suspend/resume
The pcmcia suspend/resume callbacks don't do anything. Remove
them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:46:08 +0000 (15:46 -0700)]
staging: comedi: das08_cs: remove unused pcmcia 'stop' logic
The pcmcia support code in this driver is cut-and-paste from the
dummy_cs.c driver of the Linux PCMCIA Card Services package. It
has code in it to stop the device during suspend but nothing in
the main comedi_driver uses it.
Remove the 'stop' variable from the pcmcia private data and all
the logic that deals with it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:45:34 +0000 (15:45 -0700)]
staging: comedi: das08_cs: refactor the pcmcia support code
Refactor the pcmcia support code to remove the need for the
forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:45:03 +0000 (15:45 -0700)]
staging: comedi: das08_cs: cleanup and remove useless comments
Move the comment about the PCMCIA support and reword it a bit
because of the move.
Remove a number of useless comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:44:30 +0000 (15:44 -0700)]
staging: comedi: das08_cs: cleanup the pcmcia_driver declaration
For aesthetic reasons, add some whitespace to the declaration
of the pcmcia_driver and reorder it a bit.
Also, the symbol 'das08_cs_driver' is only referenced in this file,
make it static. This quiets the following sparse warning:
warning: symbol 'das08_cs_driver' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:43:52 +0000 (15:43 -0700)]
staging: comedi: das08_cs: change driver registration order
As done with the other comedi driver types, register the
comedi_driver first then the pcmcia_driver. Also, make sure
the pcmcia_driver registration succeeds and unregister the
comedi_driver if it fails.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:43:19 +0000 (15:43 -0700)]
staging: comedi: das08_cs: consolidate the init and exit functions
The register/unregister of the pcmcia driver is done in separate
functions that are called by the module_{init,exit} routines.
Simplify the code a bit by moving the register/unregister into
the module_{init,exit} routines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 2 Jul 2012 22:42:41 +0000 (15:42 -0700)]
staging: comedi: das08_cs: move the MODULE_* stuff to the EOF
Move the MODULE_* declarations to the end of the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 29 Jun 2012 18:02:59 +0000 (11:02 -0700)]
staging: comedi: das_08: absorb i8254_struct into the private data
The i8254_struct now only contains the iobase address used to
read/write the 8254 timer device. Move that variable into the
das08 private data struct and remove the i8254_struct.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 29 Jun 2012 18:02:02 +0000 (11:02 -0700)]
staging: comedi: das_08: remove the unneeded 8254 variables and defines
Now that the driver is using the 8253 helper functions, remove the
unused variables in the i8254_struct as well as the unused defines
for the 8254 register offsets.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 29 Jun 2012 18:01:22 +0000 (11:01 -0700)]
staging: comedi: das_08: remove the 8254 'channels' usage
The internal 8254 'channels' count is the same as the comedi
subdevice 'n_chan'. There is no need to keep the internal
count.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 29 Jun 2012 18:00:40 +0000 (11:00 -0700)]
staging: comedi: das_08: remove the 8254 'logic2phys' usage
The three 8254 timers have a 1:1 relationship to the comedi
channels. The 'logic2phys' usage just makes the driver more
complex.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 29 Jun 2012 17:59:55 +0000 (10:59 -0700)]
staging: comedi: das_08: remove the cached 8254 'mode'
The driver initially sets all the cached 'mode' values for the
8254 timers to (I8254_MODE0 | I8254_BINARY). It then sets the
timers to that 'mode'. Configuring the counters with the comedi
INSN_CONFIG_SET_COUNTER_MODE updates the 'mode' and then sets
the timers to the 'mode'. The cached value is never read or
used other than for storage.
Just remove the 'mode' usage as it serves no purpose.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 29 Jun 2012 17:59:21 +0000 (10:59 -0700)]
staging: comedi: das_08: unwind the 8254 timer support
Refactor the 8254 timer support by removing the various functions
that handle the io and consolidating the logic into the initialize,
read, write, and config functions used by the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 29 Jun 2012 17:58:41 +0000 (10:58 -0700)]
staging: comedi: das_08: use the 8253 helper functions
Instead of open-coding the 8254 timer io, use the helper functions
provided by 8253.h.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 30 Jun 2012 00:41:47 +0000 (17:41 -0700)]
staging: comedi: ni_670x: removve unused 'ao_bits'
All the NI 670x boards have 16-bit anaolog output DACs. The
'ao_bits' in the boardinfo is not used so remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 30 Jun 2012 00:41:10 +0000 (17:41 -0700)]
staging: comedi: ni_670x: cleanup ni_670x_dio_insn_bits()
Add local variable for the io_addr, mask. and bits used in this
function so that the comments are not needed and the writel/readl
calls are a bit cleaner.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 30 Jun 2012 00:40:23 +0000 (17:40 -0700)]
staging: comedi: ni_670x: cleanup the boardinfo
For aesthetic reasons, reorder the boardinfo struct so that the
'name' pointer is first. Also, add some whitespace to the boardinfo
to improve readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 30 Jun 2012 00:39:45 +0000 (17:39 -0700)]
staging: comedi: ni_670x: fix dereference of an invalid pointer
The attach if this driver can fail before the subdevices are
allocated. If the attach fails the comedi core will call the
detach routine to allow the driver to do it's cleanup.
We need to make sure that the subdevice allocation was successful
before trying to dereference subdevice[0] to free the allocated
range table list.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 30 Jun 2012 00:38:54 +0000 (17:38 -0700)]
staging: comedi: ni_670x: return '0' for successful attach
The comedi core expects a < 0 value during the attach to indicate
an error. The normal 'success' return for the kernel is '0' so use
that here.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 30 Jun 2012 00:38:18 +0000 (17:38 -0700)]
staging: comedi: ni_670x: change printk's to cleaned up dev_printk's
Convert all the prink's in this file to dev_prink's.
Change the INFO message in ni_670x_find_device into a dev_warn().
This message is only displayed if a matching device was not found.
A warning is more appropriate here than info.
Consolidate the attach messages into one dev_info() output after
the successful attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 30 Jun 2012 00:37:25 +0000 (17:37 -0700)]
staging: comedi: ni_670x: remove n_ni_670x_boards macro
This macro is simply the ARRAY_SIZE() of the boardinfo. Just use
the ARRAY_SIZE and remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 30 Jun 2012 00:36:45 +0000 (17:36 -0700)]
staging: comedi: ni_670x: remove thisboard and devpriv macros
The 'thisboard' and 'devpriv' macros rely on a local variable having
a specific name and yield pointers derived from that local variable.
Replace the macros with local variables where used. Use the
comedi_board() helper to get the 'thisboard' pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 30 Jun 2012 00:36:09 +0000 (17:36 -0700)]
staging: comedi: ni_670x: remove forward declarations
Move the attach and detach functions to remove the need for the
forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 30 Jun 2012 00:35:26 +0000 (17:35 -0700)]
staging: comedi: ni_670x: use module_comedi_pci_driver
Refactor the driver to use the module_comedi_pci_driver() helper.
This gets rid of some of the module boilerplate code.
For aesthetic reasons, rename the comedi_driver and pci_driver to
follow the convention of the other comedi pci drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:08:39 +0000 (15:08 -0700)]
staging: comedi: adl_pci6208: use the driver_name for the resource name
Use the dev->driver->driver_name for the resource name passed to
pci_request_regions(), by way of comedi_pci_enable(), instead of
the open coded string "adl_pci6208".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:07:56 +0000 (15:07 -0700)]
staging: comedi: adl_pci6208: cleanup pci6208_attach()
For aesthetic reasons, set the dev->board_name as soon as the
thisboard pointer is available.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:07:05 +0000 (15:07 -0700)]
staging: comedi: adl_pci6208: cleanup pci6208_ao_rinsn()
For aesthetic reasons, reorder the local variables and change
the return value to 'insn->n'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:06:14 +0000 (15:06 -0700)]
staging: comedi: adl_pci6208: cleanup pci6208_ao_winsn()
Use the defines for the register map to make the code a bit
clearer. Shorten or rename some of the local variables for
the same reason.
Only the last value written to the DAC needs to be cached in
the ao_readback variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:04:47 +0000 (15:04 -0700)]
staging: comedi: adl_pci6208: fix the ao_readback variable size
The 'ao_readback' variable in the private data struct is used to
cache the last value written to the analog output DAC channels.
The PCI-6208 has 8 analog output channels but the variable only
allowed space to cache 2 values.
Since the PCI-6216 board could be supported by this driver and
it has 16 analog outputs, create a define for the maximum number
of channels and use that to set the size of 'ao_readback'.
For now, set the max to 8 to save space since the PCI-6216 is
not currently supported.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:04:04 +0000 (15:04 -0700)]
staging: comedi: adl_pci6208: remove unused variable in the private data
The 'data' variable in the private data struct is not used by the
driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:03:31 +0000 (15:03 -0700)]
staging: comedi: adl_pci6208: remove some useless comments
Remove a number of useless comments that are cut-and-paste from
the skel driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:02:53 +0000 (15:02 -0700)]
staging: comedi: adl_pci6208: remove the bogus pci devices
Remove the commented out pci device entries in the MODULE_DEVICE_TABLE
as well as the associated boardinfo, which is also commented out. Add
some whitespace to the boardinfo to improve readability.
This driver should also support the pci-6216 card which has an
additional 8 analog outputs (16 total). But the device id needs
to be determined.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:01:58 +0000 (15:01 -0700)]
staging: comedi: adl_pci6208: return '0' for successful attach
The comedi core expects a < 0 value during the attach to indicate
an error. The normal 'success' return for the kernel is '0' so use
that here.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:01:26 +0000 (15:01 -0700)]
staging: comedi: adl_pci6208: add whitespace to the subdev init
Add whitespace to the subdev initialization and remove the
unnecessary comments to improve readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:00:50 +0000 (15:00 -0700)]
staging: comedi: adl_pci6208: fix the digital i/o subdevice
The PCI-6208 board has 4 digital outputs and 4 digital inputs.
The support for the digital i/o subdevice was commented out and
the code was just cut-and-paste from the skel driver. Enable
the digital i/o subdevice by uncommenting the code and fixing
the insn_bits and insn_config functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 22:00:02 +0000 (15:00 -0700)]
staging: comedi: adl_pci6208: consolidate the attach messages
Consolidate the attach messages into one dev_info() output
at the end of a successful attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 21:59:19 +0000 (14:59 -0700)]
staging: comedi: adl_pci6208: pass on the error code from comedi_pci_enable
Return the actual error code from comedi_pci_enable instead of
assuming -EIO on failure. Also, shorten the local variable name 'retval'
to 'ret'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Jun 2012 21:58:03 +0000 (14:58 -0700)]
staging: comedi: adl_pci6208: remove pci6208_pci_setup()
Refactor pci6208_pci_setup() into the attach function. This
function simply enables the pci device and gets the PCI iobase
address used by the driver. There's no need for a separate
function to handle this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.043377 seconds and 5 git commands to generate.