Jani Nikula [Tue, 28 Oct 2014 14:20:47 +0000 (16:20 +0200)]
drm/edid: add #defines and helpers for ELD
In the interest of reducing magic numbers and having to cross check with
the specs all the time.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Todd Previte [Tue, 4 Nov 2014 22:17:35 +0000 (15:17 -0700)]
drm/dp: Add counters in the drm_dp_aux struct for I2C NACKs and DEFERs
These counters are used for Displayort compliance testing to detect error
conditions when executing tests 4.2.2.4 and 4.2.2.5 in the Displayport Link
CTS specificaiton. They determine whether to use the preferred/requested
mode or the failsafe mode during these tests.
V2:
- Addressed previous review feedback
- Updated commit message
- Changed from uint8_t to uint32_t
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Todd Previte <tprevite@gmail.com>
[danvet: s/uint32_t/unsigned/ for clearer intent. Also drop the i915
from the subject, it's all core stuff.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Peter Hurley [Tue, 4 Nov 2014 01:53:41 +0000 (20:53 -0500)]
drm: Remove compiler BUG_ON() test
modeset->num_connectors must be 0 to reach the BUG_ON() which tests
for non-zero modeset->num_connectors; remove BUG_ON().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Peter Hurley [Tue, 4 Nov 2014 01:51:45 +0000 (20:51 -0500)]
drm: Fix DRM_FORCE_ON_DIGITAL use
A connector may be forced on from the command line via video=
command line setting. The digital output of dual-mode connectors
can also be specifically selected and forced on; eg., 'video=DVI-I-2:D'.
However, in this case, the connector->status will be mistakenly set to
connector_status_disconnected, and the connector will not be mode set.
Fix the connector->status when connector->force is DRM_FORCE_ON_DIGITAL.
Note that this seems to have been broken ever since the introduction
of the connector forcing support in
commit
d50ba256b5f1478e15accfcfda9b72fd7a661364
Author: Dave Airlie <airlied@linux.ie>
Date: Wed Sep 23 14:44:08 2009 +1000
drm/kms: start adding command line interface using fb.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
[danvet: Add note about that this never worked.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 31 Oct 2014 14:39:13 +0000 (14:39 +0000)]
drm/gma500: Don't destroy DRM properties in the driver
When drm properties are created, they are added to mode_config.property_list
which is then used in drm_mode_config_cleanup() to destroy every single
property created by the driver.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 31 Oct 2014 14:39:12 +0000 (14:39 +0000)]
drm/i915: Don't destroy DRM properties in the driver
When drm properties are created, they are added to mode_config.property_list,
which is then used in drm_mode_config_cleanup() to destroy every single
property created by the driver.
Cc: Chandra Konduru <chandra.konduru@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 31 Oct 2014 14:39:11 +0000 (14:39 +0000)]
drm: Add a note to drm_property_create() about property lifetime
Cc: Chandra Konduru <chandra.konduru@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Masanari Iida [Thu, 23 Oct 2014 00:06:28 +0000 (09:06 +0900)]
gpu: drm: Fix warning caused by a parameter description in drm_crtc.c
This patch fix following error while "make xmldocs"
Warning(.//drivers/gpu/drm/drm_crtc.c:778): Excess function parameter
'mode' description in 'drm_connector_get_cmdline_mode'
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 22 Oct 2014 09:16:36 +0000 (11:16 +0200)]
drm/dp-helper: Move the legacy helpers to gma500
Except for gma500 all drivers are converted to the new style helpers,
which have much better abstraction of the underlying hw protocols and
already much more helper functions (including the entire mst library)
on top of them. Since no one seems to work on converting gma500 let's
just move the code away so that new drivers don't end up accidentally
using this.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
[danvet: Add __deprecated as requested by Alan. Also add a short FIXME
comment and drop the EXPORT_SYMBOL which is no longer needed.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chuck Ebbert [Wed, 8 Oct 2014 16:40:34 +0000 (11:40 -0500)]
drm/crtc: Remove duplicated ioctl code
Make drm_mode_add_fb() call drm_mode_add_fb2() after converting its
args to the new internal format, instead of duplicating code.
Also picks up a lot more error checking, which the legacy modes
should pass after being converted to the new format.
Signed-off-by: Chuck Ebbert <cebbert.lkml@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chuck Ebbert [Wed, 8 Oct 2014 16:37:20 +0000 (11:37 -0500)]
drm/crtc: Fix two typos
Fix:
ioclt -> ioctl in comment
wrong variable name in debug message
Signed-off-by: Chuck Ebbert <cebbert.lkml@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Frob manually generated patch to make it apply.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Masanari Iida [Mon, 20 Oct 2014 14:53:13 +0000 (23:53 +0900)]
gpu:drm: Fix typo in Documentation/DocBook/drm.xml
This patch fix spelling typos found in drm.xml.
It is because the file is generated from comments in
source codes, I have to fix the typos within source files.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rickard Strandqvist [Sat, 11 Oct 2014 22:02:32 +0000 (00:02 +0200)]
gpu: drm: drm_dp_mst_topology.c: Fix improper use of strncat
Fixed wrong usage of strncat, switched to strlcpy.
While sending the string size to function to reduce
the potential for misuse in future.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Joe Perches [Sun, 12 Oct 2014 05:08:57 +0000 (22:08 -0700)]
drm: drm_err: Remove unnecessary __func__ argument
Removing the unnecessary drm_err __func__ argument by using
the equivalent %pf and __builtin_return_address(0) makes the
code smaller for every use of the DRM_ERROR macro.
For instance: (allmodconfig)
$ size drivers/gpu/drm/i915/i915.o*
text data bss dec hex filename
922447 193257 296736
1412440 158d58 drivers/gpu/drm/i915/i915.o.new
928111 193257 296736
1418104 15a378 drivers/gpu/drm/i915/i915.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 7 Oct 2014 13:13:51 +0000 (14:13 +0100)]
drm: Implement O_NONBLOCK support on /dev/dri/cardN
The implmentation is simple in the extreme: we only want to wait for
events if the device was opened in blocking mode, otherwise we grab what
is available and report an error if there was none.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Testcase: igt/kms_flip/nonblocing_read
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Andrzej Hajda [Tue, 30 Sep 2014 14:49:56 +0000 (16:49 +0200)]
drm/core: use helper to check driver features
The patch replaces direct access to driver_features field
by calls to helper function.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Clint Taylor [Fri, 26 Sep 2014 16:55:24 +0000 (09:55 -0700)]
drm/edid: Add missing interlaced flag to 576i@100 modes.
CEA VICs 44 and 45 were missing DRM_MODE_FLAG_INTERLACE.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Wed, 1 Oct 2014 09:27:38 +0000 (19:27 +1000)]
Merge branch 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux into drm-next
fixups for nouveau and fencing
* 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux:
drm/nouveau: export reservation_object from dmabuf to ttm
drm/ttm: add reservation_object as argument to ttm_bo_init
drm: Pass dma-buf as argument to gem_prime_import_sg_table
drm/nouveau: assign fence_chan->name correctly
drm/nouveau: specify if interruptible wait is desired in nouveau_fence_sync
drm/nouveau: bump driver patchlevel to 1.2.1
Dave Airlie [Wed, 1 Oct 2014 09:27:01 +0000 (19:27 +1000)]
Merge tag 'topic/core-stuff-2014-09-29' of git://anongit.freedesktop.org/drm-intel into drm-next
Ok, here's the update core-stuff pull request with the locking fixup patch
fixed up with another patch.
* tag 'topic/core-stuff-2014-09-29' of git://anongit.freedesktop.org/drm-intel:
drm: Drop grab fpriv->fbs_lock in drm_fb_release
drm/udl: use container_of to resolve udl_fbdev from drm_fb_helper
drm/ast: use container_of to resolve ast_fbdev from drm_fb_helper
drm/gma500: use container_of to resolve psb_fbdev from drm_fb_helper
drm/qxl: use container_of to resolve qxl_fbdev from drm_fb_helper
drm/nouveau: use container_of to resolve nouveau_plane from drm_plane
drm/nouveau: use container_of to resolve nouveau_fbdev from drm_fb_helper
drm/radeon: use container_of to resolve radeon_fbdev from drm_fb_helper
drm/mgag200: use container_of to resolve mga_fbdev from drm_fb_helper
drm/cirrus: use container_of to resolve cirrus_fbdev from drm_fb_helper
drm: Improve debug output for drm_wait_one_vblank
drm: Fixup locking for universal cursor planes
drm: Don't update vblank timestamp when the counter didn't change
Maarten Lankhorst [Thu, 9 Jan 2014 10:03:15 +0000 (11:03 +0100)]
drm/nouveau: export reservation_object from dmabuf to ttm
Adds an extra argument to nouveau_bo_new, which is only used in nouveau_prime.c.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Thu, 9 Jan 2014 10:03:15 +0000 (11:03 +0100)]
drm/ttm: add reservation_object as argument to ttm_bo_init
This allows importing reservation objects from dma-bufs.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Thu, 9 Jan 2014 10:03:14 +0000 (11:03 +0100)]
drm: Pass dma-buf as argument to gem_prime_import_sg_table
Allows importing dma_reservation_objects from a dma-buf.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Mon, 29 Sep 2014 08:06:18 +0000 (10:06 +0200)]
drm/nouveau: assign fence_chan->name correctly
Make nouveau_fence_chan refcounted, to make trace_fence_destroy
always return the correct name without a race condition.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Tue, 16 Sep 2014 09:15:07 +0000 (11:15 +0200)]
drm/nouveau: specify if interruptible wait is desired in nouveau_fence_sync
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Wed, 10 Sep 2014 14:15:23 +0000 (16:15 +0200)]
drm/nouveau: bump driver patchlevel to 1.2.1
Allows userspace to detect shared fences are supported.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Maarten Lankhorst [Mon, 22 Sep 2014 09:08:48 +0000 (11:08 +0200)]
drm/nouveau: nv84+: fix fence context seqno's
This fixes a regression introduced by "drm/nouveau: rework to new fence interface"
(commit
29ba89b2371d466).
The fence sequence should not be reset after creation, the old value is used instead.
On destruction the final value is written, to prevent another source of accidental
wraparound in case of a channel being destroyed after a hang, and unblocking any other
channel that may wait on the about-to-be-deleted channel to signal.
I'm nothing if not optimistic about any hope of recovery from that. ;-)
Reported-by: Ted Percival <ted@tedp.id.au>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Ted Percival <ted@tedp.id.au>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Wed, 24 Sep 2014 19:51:06 +0000 (21:51 +0200)]
drm: Drop grab fpriv->fbs_lock in drm_fb_release
Paulo Zanoni reported a lockdep splat with a locking inversion between
fpriv->fbs_lock and the modeset locks. This issue was introduced in
commit
f2b50c1161590c3bcdbf3455fe4c575f1c1bd293
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Sep 12 17:07:32 2014 +0200
drm: Fixup locking for universal cursor planes
This here is actually one of the rare cases where lockdep hits a false
positive: The deadlock only happens in drm_fb_release, which cleans up
the file private structure when all the references are gone. So the
locking is the very last one and no one else can deadlock. It also
doesn't protect anything at all, since all ioctls are guaranteed to
have returned at this point - otherwise they'd still hold a reference
on the file.
So let's just drop it and replace it with a big comment.
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reported-and-Tested-by: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fabian Frederick [Sun, 14 Sep 2014 16:40:22 +0000 (18:40 +0200)]
drm/udl: use container_of to resolve udl_fbdev from drm_fb_helper
Use container_of instead of casting first structure member.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fabian Frederick [Sun, 14 Sep 2014 16:40:21 +0000 (18:40 +0200)]
drm/ast: use container_of to resolve ast_fbdev from drm_fb_helper
Use container_of instead of casting first structure member.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fabian Frederick [Sun, 14 Sep 2014 16:40:20 +0000 (18:40 +0200)]
drm/gma500: use container_of to resolve psb_fbdev from drm_fb_helper
Use container_of instead of casting first structure member.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fabian Frederick [Sun, 14 Sep 2014 16:40:19 +0000 (18:40 +0200)]
drm/qxl: use container_of to resolve qxl_fbdev from drm_fb_helper
Use container_of instead of casting first structure member.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fabian Frederick [Sun, 14 Sep 2014 16:40:18 +0000 (18:40 +0200)]
drm/nouveau: use container_of to resolve nouveau_plane from drm_plane
Use container_of instead of casting first structure member.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fabian Frederick [Sun, 14 Sep 2014 16:40:17 +0000 (18:40 +0200)]
drm/nouveau: use container_of to resolve nouveau_fbdev from drm_fb_helper
Use container_of instead of casting first structure member.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fabian Frederick [Sun, 14 Sep 2014 16:40:16 +0000 (18:40 +0200)]
drm/radeon: use container_of to resolve radeon_fbdev from drm_fb_helper
Use container_of instead of casting first structure member.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fabian Frederick [Sun, 14 Sep 2014 16:40:15 +0000 (18:40 +0200)]
drm/mgag200: use container_of to resolve mga_fbdev from drm_fb_helper
Use container_of instead of casting first structure member.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fabian Frederick [Sun, 14 Sep 2014 16:40:14 +0000 (18:40 +0200)]
drm/cirrus: use container_of to resolve cirrus_fbdev from drm_fb_helper
Use container_of instead of casting first structure member.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 15 Sep 2014 12:04:28 +0000 (14:04 +0200)]
drm: Improve debug output for drm_wait_one_vblank
This replicates what we've done in i915 in
commit
31e4b89acbd7b19c9a8557e6e660a583a0b97daa
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Mon Aug 18 13:51:00 2014 +0100
drm/i915: Print the pipe on which the vblank wait times out
to make sure that when we switch i915 to drm_wait_one_vblank that the
debug output doesn't regress.
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Fri, 12 Sep 2014 15:07:32 +0000 (17:07 +0200)]
drm: Fixup locking for universal cursor planes
Bunch of things amiss:
- Updating crtc->cursor_x/y was done without any locking. Spotted by
David Herrmann.
- Dereferencing crtc->cursor->fb was using the wrong lock, should take
the crtc lock.
- Grabbing _all_ modeset locks torpedoes the reason why we added
fine-grained locks originally: Cursor updates shouldn't stall on
background stuff like probing outputs.
Best is to just grab the crtc lock around everything and drop all the
other locking. The only issue is that we can't switch planes between
crtcs with that, so make sure that never happens when someone uses
universal plane helpers. This shouldn't be a possible regression ever
since legacy ioctls also only grabbed the crtc lock, so switching
crtcs was never possible for the underlying plane object. And i915
(the only user of universal cursors thus far) has fixed cursor->crtc
links.
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Pallavi G<pallavi.g@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Mario Kleiner [Sat, 13 Sep 2014 16:25:54 +0000 (18:25 +0200)]
drm: Don't update vblank timestamp when the counter didn't change
If we already have a timestamp for the current vblank counter, don't
update it with a new timestmap. Small errors can creep in between two
timestamp queries for the same vblank count, which could be confusing to
userspace when it queries the timestamp for the same vblank sequence
number twice.
This problem gets exposed when the vblank disable timer is not used
(or is set to expire quickly) and thus we can get multiple vblank
disable<->enable transition during the same frame which would all
attempt to update the timestamp with the latest estimate.
Testcase: igt/kms_flip/flip-vs-expired-vblank
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
v2:Mario: Trivial rebase on top of current drm-next (13-Sep-2014)
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 23 Sep 2014 13:46:54 +0000 (15:46 +0200)]
drm/doc: Fixup drm_irq kerneldoc includes.
Only !P can be used together with a function list.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Tue, 23 Sep 2014 13:46:53 +0000 (15:46 +0200)]
drm: Extract <drm/drm_gem.h>
v2: Don't forget git add, noticed by David.
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Tue, 23 Sep 2014 13:46:52 +0000 (15:46 +0200)]
drm: Move internal debugfs functions to drm_internal.h
In my header cleanup I've missed the debugfs functions completely.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Tue, 23 Sep 2014 13:46:51 +0000 (15:46 +0200)]
drm: Move leftover ioctl declarations to drm_internal.h
Somehow I've missed these three, fix this up asap. Plus move
drm_master_create since while at it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Tue, 23 Sep 2014 13:46:50 +0000 (15:46 +0200)]
drm: Move drm_vm_open_locked into drm_internal.h
Leftover from my previous header cleanup.
This depends upon the patch to rework exynos mmap support, otherwise
it'll break exynos.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Tue, 23 Sep 2014 13:46:49 +0000 (15:46 +0200)]
drm: move drm_mmap to <drm/drm_legacy.h>
Now that we've removed the copypasted users in gem/ttm we can
relegate the legacy buffer mapping support to where it belongs.
Also give it the proper drm_legacy_ prefix.
While at it statify drm_mmap_locked, somehow I've missed that in my
previous header rework.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Tue, 23 Sep 2014 13:46:48 +0000 (15:46 +0200)]
drm/gem: Don't call drm_mmap from drm_gem_mmap
The only user I could dig out was i915 back when ums+gem was still a
thing. But we've just very much killed that, and even when someone
screams about that we should resurrect that with a special hack
(wrapping drm_gem_mmap) in i915, not in the core code.
So good riddance to another entry point of the legacy buffer mapping
code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Tue, 23 Sep 2014 13:46:47 +0000 (15:46 +0200)]
drm/<ttm-based-drivers>: Don't call drm_mmap
Really, the legacy buffer api should be dead, especially for all these
newfangled drivers. I suspect this is copypasta from the transitioning
days, which probably originated in radeon.
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Rashika <rashika.kheria@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Joe Perches [Mon, 22 Sep 2014 16:30:11 +0000 (09:30 -0700)]
drm: change drm_err return type to void
The return value is not used by callers of this function
nor by uses of the DRM_ERROR macro so change the function
to return void.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Benjamin Herrenschmidt [Thu, 4 Sep 2014 07:47:23 +0000 (17:47 +1000)]
drm/ttm: Clean usage of ttm_io_prot() with TTM_PL_FLAG_CACHED
Today, most callers of ttm_io_prot() check TTM_PL_FLAG_CACHED before
calling it since on some archs it will unconditionally create non-cached
mappings.
But not all callers do which is incorrect as far as I can tell.
Instead, move that check inside ttm_io_port() itself for all archs
and make powerpc use the same implementation as ia64 and arm
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Benjamin Herrenschmidt [Thu, 4 Sep 2014 07:46:45 +0000 (17:46 +1000)]
drm: powerpc can use a simpler drm_io_prot()
What the code does is equivalent to the x86 code, so let's use
it as well
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 22 Sep 2014 00:07:25 +0000 (10:07 +1000)]
Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next
Sorry for late. This pull request includes some enhancements
for Exynos drm, new feature supports, cleanups and fixups
like below,
- Consider low power transmission for drm mipi dsi module,
and also add non-continuous clock mode support for Exynos
mipi dsi driver.
- Add Exynos3250 SoC support.
- Enhance and clean up ipp framework and fimc driver.
- Update to use component match support and fix up
de-initialization order.
- Remove a direct mmap interface and relevant stuff specific to
Exynos drm, use drm generic mmap interface instead.
And we will remove the specific interface from userspace
library, libdrm soon.
- Use universal plane which allows to replace fake primary plane
with the real one.
- Some code cleanups and fixups.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (40 commits)
drm/exynos: switch to universal plane API
drm/exynos: use drm generic mmap interface
drm/exynos: remove DRM_EXYNOS_GEM_MAP_OFFSET ioctl
drm/exynos: factor out initial setting of each driver
drm/exynos/hdmi: unregister connector on removal
drm/exynos/dp: unregister connector on removal
drm/exynos/dpi: unregister connector and panel on removal
drm/exynos/dsi: unregister connector on removal
drm/exynos/fb: free exynos framebuffer on error
drm/exynos/fbdev: fix fbdev gem object cleanup
drm/exynos: fix drm driver de-initialization order
drm/exynos/ipp: traverse ipp drivers list safely
drm/exynos: update to use component match support
drm/exynos/ipp: add file checks for ioctls
drm/exynos/ipp: remove file argument from node related functions
drm/exynos/fimc: fix source buffer registers
drm/exynos/fimc: simplify buffer queuing
drm/exynos/fimc: do not enable fimc twice
drm/exynos/fimc: avoid clearing overflow bits
drm/exynos/ipp: remove events during command cleaning
...
Andrzej Hajda [Fri, 19 Sep 2014 12:58:53 +0000 (14:58 +0200)]
drm/exynos: switch to universal plane API
The patch replaces legacy functions
drm_plane_init() / drm_crtc_init() with
drm_universal_plane_init() and drm_crtc_init_with_planes().
It allows to replace fake primary plane with the real one.
Additionally the patch leaves cleanup of crtcs to core,
this way planes and crtcs are cleaned in correct order.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Thu, 18 Sep 2014 05:19:01 +0000 (14:19 +0900)]
drm/exynos: use drm generic mmap interface
This patch removes DRM_EXYNOS_GEM_MMAP ictrl feature specific
to Exynos drm and instead uses drm generic mmap.
We had used the interface specific to Exynos drm to do mmap directly,
not to use demand paging which maps each page with physical memory
at page fault handler. We don't need the specific mmap interface
because the drm generic mmap which uses vm offset manager stuff can
also do mmap directly.
This patch makes a userspace region to be mapped with whole physical
memory region allocated by userspace request when mmap system call is
requested.
Changelog v2:
- do not set VM_IO, VM_DONTEXPEND and VM_DONTDUMP. These flags were already
set by drm_gem_mmap
- do not include <linux/anon_inodes.h>, which isn't needed anymore.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Wed, 17 Sep 2014 13:48:45 +0000 (22:48 +0900)]
drm/exynos: remove DRM_EXYNOS_GEM_MAP_OFFSET ioctl
This interface and relevant codes aren't used anymore.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim [Thu, 18 Sep 2014 08:50:35 +0000 (17:50 +0900)]
drm/exynos: factor out initial setting of each driver
From fimd driver and vidi driver, dev->irq_enabled and
dev->vblank_disable_allowed are set and also mixer needs them even if
missed. It's duplicated so set them when loads drm driver.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 9 Sep 2014 13:16:13 +0000 (15:16 +0200)]
drm/exynos/hdmi: unregister connector on removal
During component removal driver should unregister connector.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 9 Sep 2014 13:16:12 +0000 (15:16 +0200)]
drm/exynos/dp: unregister connector on removal
During component removal driver should unregister connector.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 9 Sep 2014 13:16:11 +0000 (15:16 +0200)]
drm/exynos/dpi: unregister connector and panel on removal
During component removal it should unregister connector
and optionally detach the panel.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 9 Sep 2014 13:16:10 +0000 (15:16 +0200)]
drm/exynos/dsi: unregister connector on removal
During component unbind connector should be unregistered.
Also DSI host should be unregistered after KMS cleanup.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 9 Sep 2014 13:16:08 +0000 (15:16 +0200)]
drm/exynos/fb: free exynos framebuffer on error
In case drm_framebuffer_init fails exynos_fb should be freed
before returning an error.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 9 Sep 2014 13:16:07 +0000 (15:16 +0200)]
drm/exynos/fbdev: fix fbdev gem object cleanup
exynos_gem_obj is used by exynos_drm_fbdev_destroy so it cannot be destroyed
before calling the latter. exynos_gem_obj will be destroyed anyway by
exynos_drm_fbdev_destroy->...->exynos_drm_fb_destroy.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 9 Sep 2014 13:16:06 +0000 (15:16 +0200)]
drm/exynos: fix drm driver de-initialization order
Since components have their own cleanup routines calling
drm_mode_config_cleanup before component_unbind_all causes errors
due to double free of KMS objects. The patch fixes it by changing
de-initialization order. Now it is exactly opposite to init order.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 9 Sep 2014 13:16:05 +0000 (15:16 +0200)]
drm/exynos/ipp: traverse ipp drivers list safely
On ipp subsystem removal list of ipp drivers is traversed
and their members are deleted. To do it properly safe version
of list_for_each* should be used.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Thu, 11 Sep 2014 08:04:03 +0000 (17:04 +0900)]
drm/exynos: update to use component match support
Update Exynos's DRM driver to use component match support rater than
add_components.
Changelog v2:
- release devices and drivers if failed.
- change compare_of to compare_dev.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Andrzej Hajda [Tue, 2 Sep 2014 12:56:21 +0000 (14:56 +0200)]
drm/exynos/ipp: add file checks for ioctls
Process should not have access to ipp nodes created by another
process. The patch adds necessary checks.
It also simplifies lookup for command node.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 2 Sep 2014 12:55:06 +0000 (14:55 +0200)]
drm/exynos/ipp: remove file argument from node related functions
Since file pointer is preserved in c_node passing it
as argument in node functions is redundant.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:39 +0000 (11:07 +0200)]
drm/exynos/fimc: fix source buffer registers
FIMC in default mode of operation uses only one input buffer,
but the driver used also second buffer, as a result only the
first frame was processed correctly. The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:38 +0000 (11:07 +0200)]
drm/exynos/fimc: simplify buffer queuing
The patch removes redundant checks, redundant HW reads
and simplifies code.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:37 +0000 (11:07 +0200)]
drm/exynos/fimc: do not enable fimc twice
The patch removes redundant H/W activation.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:36 +0000 (11:07 +0200)]
drm/exynos/fimc: avoid clearing overflow bits
Overflow bits shall be cleared by H/W.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:35 +0000 (11:07 +0200)]
drm/exynos/ipp: remove events during command cleaning
Events were removed only during stop command, as a result
there were memory leaks if program prematurely exited.
This patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:34 +0000 (11:07 +0200)]
drm/exynos/ipp: stop hardware before freeing memory
Memory shouldn't be freed when hardware is still running.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:33 +0000 (11:07 +0200)]
drm/exynos/ipp: replace work_struct casting with better constructs
Type casting should be avoided if possible. In case of
work_struct it can be simply replaced by reference to member field.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:32 +0000 (11:07 +0200)]
drm/exynos/ipp: clean memory nodes on command node cleaning
The nodes should be removed before removing command node.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:31 +0000 (11:07 +0200)]
drm/exynos/ipp: move nodes cleaning to separate function
The patch introduces ipp_clean_mem_nodes function which replaces
redundant code. Additionally memory node function definitions
are moved up to increase its visibility.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:30 +0000 (11:07 +0200)]
drm/exynos/ipp: free partially allocated resources on error
In case of allocation errors some already allocated buffers
were not freed. The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:29 +0000 (11:07 +0200)]
drm/exynos/ipp: remove unused field in command node
Since command node have file pointer dev field became useless.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:28 +0000 (11:07 +0200)]
drm/exynos/ipp: remove only related commands on file close
On file close driver should remove only command nodes created
via this file.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:27 +0000 (11:07 +0200)]
drm/exynos/ipp: move file reference from memory to command node
Command node should contain file reference to distinguish commands
created by different processes.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:26 +0000 (11:07 +0200)]
drm/exynos/ipp: cancel works before command node clean
All pending works should be canceled prior to its removal.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 28 Aug 2014 09:07:25 +0000 (11:07 +0200)]
drm/exynos/ipp: remove fake pm callbacks
PM callbacks in ipp core do nothing, so the patch removes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Marek Szyprowski [Mon, 1 Sep 2014 13:27:10 +0000 (22:27 +0900)]
drm/exynos: fimd: fix window clear code
To correctly disable hardware window during driver init, both enable bits
(WINCONx_ENWIN in WINCON and SHADOWCON_CHx_ENABLE in SHADOWCON) must be
cleared, otherwise hardware fails to re-enable such window later.
While touching this function, also temporarily disable ctx->suspended flag
to let fimd_wait_for_vblank function really to do its job.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Daniel Kurtz [Mon, 1 Sep 2014 12:28:00 +0000 (21:28 +0900)]
drm/exynos/fbdev: set smem_len for fbdev
Commit [0] stopped setting fix.smem_start and fix.smem_len when creating
the fbdev.
[0]
2f1eab8d8ab59e799f7d51d62410b398607a7bc3
drm/exynos/fbdev: don't set fix.smem/mmio_{start,len}
However, smem_len is used by some userland applications to calculate the
size for mmap. In particular, it is used by xf86-video-fbdev:
http://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/fbdevhw/fbdevhw.c?id=xorg-server-1.15.99.903#n571
So, let's restore setting the smem_len to unbreak things for these users.
Note: we are still leaving smem_start set to 0.
Reported-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reported-by: Gunther Noack <me@guenthernoack.de>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Wed, 13 Aug 2014 11:53:47 +0000 (20:53 +0900)]
ARM: dts: add mipi dsi device node to exynos3250.dtsi
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Inki Dae [Wed, 13 Aug 2014 11:46:12 +0000 (20:46 +0900)]
ARM: dts: add mipi_phy device node to exynos3250.dtsi
This patch adds mipi_phy device node to reset, disable and enable
DSIM and CSIS PHY.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Inki Dae [Wed, 13 Aug 2014 11:37:53 +0000 (20:37 +0900)]
ARM: dts: add fimd device node to exynos3250.dsti
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Inki Dae [Mon, 18 Aug 2014 07:53:19 +0000 (16:53 +0900)]
drm/exynos: fimd: add Exynos3 SoC support
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Inki Dae [Wed, 13 Aug 2014 08:09:12 +0000 (17:09 +0900)]
drm/exynos: mipi-dsi: add Exynos3 SoC support
This patch adds Exynos3250/3472 SoCs support.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Inki Dae [Wed, 13 Aug 2014 08:03:12 +0000 (17:03 +0900)]
drm/exynos: mipi-dsi: consider non-continuous clock mode
This patch adds non-continuous clock mode support
Clock mode on Clock Lane is continuous clock by default.
So if we want to transmit data in non-continuous clock mode
to reduce power consumption, then host driver should set
DSIM_CLKLANE_STOP bit. In this case, host controller turns off
HS clock between high speed transmissions.
For this, this patch adds a new bit, DSIM_CLKLANE_STOP, and makes
the host driver sets this bit only in case that dsi->mode_flags has
MIPI_DSI_CLOCK_NON_CONTINUOUS flag.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Inki Dae [Wed, 13 Aug 2014 07:38:23 +0000 (16:38 +0900)]
drm/mipi-dsi: consider low power transmission
This patch adds a new flag, MIPI_DSI-MODE_LPM, to transmit data
in low power. With this flag, msg.flags has MIPI_DSI_MSG_USE_LPM
so that host driver of each SoC can clear or set relevant register
bit for low power transmission.
All host drivers shall support continuous clock behavior on the
Clock Lane, and optionally may support non-continuous clock behavior.
Both of them can transmit data in high speed of low power.
With each clock behavior, non-continuous or continuous clock mode,
host controller will transmit data in high speed by default so if
peripheral wants to receive data in low power, the peripheral driver
should set MIPI_DSI_MODE_LPM flag.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Thu, 14 Aug 2014 02:22:36 +0000 (11:22 +0900)]
drm/exynos: dsi: fix exynos_dsi_set_pll() wrong return value
The type of this function is unsigned long, and it is expected
to return proper fout value or zero if something is wrong.
So this patch fixes wrong return value for error cases.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Dave Airlie [Fri, 19 Sep 2014 00:41:12 +0000 (10:41 +1000)]
Merge branch 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-next
single AGP fix
* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix AGP userptr handling
Christian König [Wed, 17 Sep 2014 10:00:05 +0000 (04:00 -0600)]
drm/radeon: fix AGP userptr handling
AGP mappings are not cache coherent, so userptr support
won't work. Additional to that the AGP implementation uses
a different ttm_tt container structure so we run into
problems if we cast the pointer without checking if it's
the right type.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Wed, 17 Sep 2014 09:55:19 +0000 (19:55 +1000)]
Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next
Commit "drm/rcar-du: Use struct videomode in platform data" touches board code
in arch/arm/mach-shmobile. There is, to the best of my knowledge, no risk of
conflict for v3.18. Simon, are you fine with getting those changes merged
through Dave's tree (and could you confirm that no conflict should occur) ?
Simon acked the merge:
Acked-by: Simon Horman <horms+renesas@verge.net.au>
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
drm/rcar-du: Add OF support
drm/rcar-du: Use struct videomode in platform data
video: Add DT bindings for the R-Car Display Unit
video: Add THC63LVDM83D DT bindings documentation
video: Add ADV7123 DT bindings documentation
video: Add DT binding documentation for VGA connector
devicetree: Add vendor prefix "thine" to vendor-prefixes.txt
devicetree: Add vendor prefix "mitsubishi" to vendor-prefixes.txt
drm/shmob: Update copyright notice
drm/rcar-du: Update copyright notice
Kees Cook [Thu, 11 Sep 2014 20:53:54 +0000 (13:53 -0700)]
drm/ttm: make sure format string cannot leak in
While zone->name is currently hard coded, the call to kobject_init_and_add()
should follow the more defensive argument list usage (as already done in
other places in ttm_memory.c) where "%s" is used instead of directly passing
in a variable as a format string.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ezequiel Garcia [Tue, 2 Sep 2014 12:51:22 +0000 (09:51 -0300)]
drm/tilcdc: panel: Add support for enable GPIO
In order to support the "enable GPIO" available in many panel devices,
this commit adds a proper devicetree binding.
By providing an enable GPIO in the devicetree, the driver can now turn
off and on the panel device, and/or the backlight device. Both the
backlight and the GPIO are optional properties.
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ezequiel Garcia [Tue, 2 Sep 2014 12:51:21 +0000 (09:51 -0300)]
drm/tilcdc: panel: Set return value explicitly
Instead of setting an initial value for the return code, set it explicitly
on each error path. This is just a cosmetic cleanup, as preparation for the
enable GPIO support.
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ezequiel Garcia [Tue, 2 Sep 2014 12:51:20 +0000 (09:51 -0300)]
drm/tilcdc: panel: Fix backlight devicetree support
The current backlight support is broken; the driver expects a backlight-class
in the panel devicetree node. Fix this by implementing it properly, getting
an optional backlight from a phandle.
This shouldn't cause any backward-compatibility DT issue because the current
implementation doesn't work and is not even documented.
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ezequiel Garcia [Tue, 2 Sep 2014 12:51:19 +0000 (09:51 -0300)]
drm/tilcdc: panel: Use devm_kzalloc to simplify the error path
Using the managed variant to allocate the resource makes the code simpler
and less error-prone.
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ezequiel Garcia [Tue, 2 Sep 2014 12:51:18 +0000 (09:51 -0300)]
drm/tilcdc: panel: Spurious whitespace removal
Just a cosmetic cleanup.
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This page took 0.046094 seconds and 5 git commands to generate.